freebsd-skq/contrib/wpa/wpa_supplicant/ctrl_iface.c

2143 lines
52 KiB
C
Raw Normal View History

2009-03-01 22:10:07 +00:00
/*
* WPA Supplicant / Control interface (shared code for all backends)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
* Copyright (c) 2004-2010, Jouni Malinen <j@w1.fi>
2009-03-01 22:10:07 +00:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Alternatively, this software may be distributed under the terms of BSD
* license.
*
* See README and COPYING for more details.
*/
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#include "utils/includes.h"
2009-03-01 22:10:07 +00:00
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#include "utils/common.h"
#include "utils/eloop.h"
#include "common/ieee802_11_defs.h"
#include "common/wpa_ctrl.h"
#include "eap_peer/eap.h"
2009-03-01 22:10:07 +00:00
#include "eapol_supp/eapol_supp_sm.h"
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#include "rsn_supp/wpa.h"
#include "rsn_supp/preauth.h"
#include "rsn_supp/pmksa_cache.h"
2009-03-01 22:10:07 +00:00
#include "l2_packet/l2_packet.h"
#include "wps/wps.h"
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#include "config.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "wps_supplicant.h"
#include "ibss_rsn.h"
#include "ap.h"
#include "notify.h"
#include "bss.h"
#include "scan.h"
#include "ctrl_iface.h"
extern struct wpa_driver_ops *wpa_drivers[];
2009-03-01 22:10:07 +00:00
static int wpa_supplicant_global_iface_list(struct wpa_global *global,
char *buf, int len);
static int wpa_supplicant_global_iface_interfaces(struct wpa_global *global,
char *buf, int len);
static int wpa_supplicant_ctrl_iface_set(struct wpa_supplicant *wpa_s,
char *cmd)
{
char *value;
int ret = 0;
value = os_strchr(cmd, ' ');
if (value == NULL)
return -1;
*value++ = '\0';
wpa_printf(MSG_DEBUG, "CTRL_IFACE SET '%s'='%s'", cmd, value);
if (os_strcasecmp(cmd, "EAPOL::heldPeriod") == 0) {
eapol_sm_configure(wpa_s->eapol,
atoi(value), -1, -1, -1);
} else if (os_strcasecmp(cmd, "EAPOL::authPeriod") == 0) {
eapol_sm_configure(wpa_s->eapol,
-1, atoi(value), -1, -1);
} else if (os_strcasecmp(cmd, "EAPOL::startPeriod") == 0) {
eapol_sm_configure(wpa_s->eapol,
-1, -1, atoi(value), -1);
} else if (os_strcasecmp(cmd, "EAPOL::maxStart") == 0) {
eapol_sm_configure(wpa_s->eapol,
-1, -1, -1, atoi(value));
} else if (os_strcasecmp(cmd, "dot11RSNAConfigPMKLifetime") == 0) {
if (wpa_sm_set_param(wpa_s->wpa, RSNA_PMK_LIFETIME,
atoi(value)))
ret = -1;
} else if (os_strcasecmp(cmd, "dot11RSNAConfigPMKReauthThreshold") ==
0) {
if (wpa_sm_set_param(wpa_s->wpa, RSNA_PMK_REAUTH_THRESHOLD,
atoi(value)))
ret = -1;
} else if (os_strcasecmp(cmd, "dot11RSNAConfigSATimeout") == 0) {
if (wpa_sm_set_param(wpa_s->wpa, RSNA_SA_TIMEOUT, atoi(value)))
ret = -1;
} else
ret = -1;
return ret;
}
#ifdef IEEE8021X_EAPOL
static int wpa_supplicant_ctrl_iface_preauth(struct wpa_supplicant *wpa_s,
char *addr)
{
u8 bssid[ETH_ALEN];
struct wpa_ssid *ssid = wpa_s->current_ssid;
if (hwaddr_aton(addr, bssid)) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE PREAUTH: invalid address "
"'%s'", addr);
return -1;
}
wpa_printf(MSG_DEBUG, "CTRL_IFACE PREAUTH " MACSTR, MAC2STR(bssid));
rsn_preauth_deinit(wpa_s->wpa);
if (rsn_preauth_init(wpa_s->wpa, bssid, ssid ? &ssid->eap : NULL))
return -1;
return 0;
}
#endif /* IEEE8021X_EAPOL */
#ifdef CONFIG_PEERKEY
/* MLME-STKSTART.request(peer) */
static int wpa_supplicant_ctrl_iface_stkstart(
struct wpa_supplicant *wpa_s, char *addr)
{
u8 peer[ETH_ALEN];
if (hwaddr_aton(addr, peer)) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE STKSTART: invalid "
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
"address '%s'", addr);
2009-03-01 22:10:07 +00:00
return -1;
}
wpa_printf(MSG_DEBUG, "CTRL_IFACE STKSTART " MACSTR,
MAC2STR(peer));
return wpa_sm_stkstart(wpa_s->wpa, peer);
}
#endif /* CONFIG_PEERKEY */
#ifdef CONFIG_IEEE80211R
static int wpa_supplicant_ctrl_iface_ft_ds(
struct wpa_supplicant *wpa_s, char *addr)
{
u8 target_ap[ETH_ALEN];
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
struct wpa_bss *bss;
const u8 *mdie;
2009-03-01 22:10:07 +00:00
if (hwaddr_aton(addr, target_ap)) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE FT_DS: invalid "
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
"address '%s'", addr);
2009-03-01 22:10:07 +00:00
return -1;
}
wpa_printf(MSG_DEBUG, "CTRL_IFACE FT_DS " MACSTR, MAC2STR(target_ap));
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
bss = wpa_bss_get_bssid(wpa_s, target_ap);
if (bss)
mdie = wpa_bss_get_ie(bss, WLAN_EID_MOBILITY_DOMAIN);
else
mdie = NULL;
return wpa_ft_start_over_ds(wpa_s->wpa, target_ap, mdie);
2009-03-01 22:10:07 +00:00
}
#endif /* CONFIG_IEEE80211R */
#ifdef CONFIG_WPS
static int wpa_supplicant_ctrl_iface_wps_pbc(struct wpa_supplicant *wpa_s,
char *cmd)
{
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
u8 bssid[ETH_ALEN], *_bssid = bssid;
2009-03-01 22:10:07 +00:00
if (cmd == NULL || os_strcmp(cmd, "any") == 0)
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
_bssid = NULL;
else if (hwaddr_aton(cmd, bssid)) {
2009-03-01 22:10:07 +00:00
wpa_printf(MSG_DEBUG, "CTRL_IFACE WPS_PBC: invalid BSSID '%s'",
cmd);
return -1;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_AP
if (wpa_s->ap_iface)
return wpa_supplicant_ap_wps_pbc(wpa_s, _bssid);
#endif /* CONFIG_AP */
return wpas_wps_start_pbc(wpa_s, _bssid);
2009-03-01 22:10:07 +00:00
}
static int wpa_supplicant_ctrl_iface_wps_pin(struct wpa_supplicant *wpa_s,
char *cmd, char *buf,
size_t buflen)
{
u8 bssid[ETH_ALEN], *_bssid = bssid;
char *pin;
int ret;
pin = os_strchr(cmd, ' ');
if (pin)
*pin++ = '\0';
if (os_strcmp(cmd, "any") == 0)
_bssid = NULL;
else if (hwaddr_aton(cmd, bssid)) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE WPS_PIN: invalid BSSID '%s'",
cmd);
return -1;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_AP
if (wpa_s->ap_iface)
return wpa_supplicant_ap_wps_pin(wpa_s, _bssid, pin,
buf, buflen);
#endif /* CONFIG_AP */
2009-03-01 22:10:07 +00:00
if (pin) {
ret = wpas_wps_start_pin(wpa_s, _bssid, pin);
if (ret < 0)
return -1;
ret = os_snprintf(buf, buflen, "%s", pin);
if (ret < 0 || (size_t) ret >= buflen)
return -1;
return ret;
}
ret = wpas_wps_start_pin(wpa_s, _bssid, NULL);
if (ret < 0)
return -1;
/* Return the generated PIN */
ret = os_snprintf(buf, buflen, "%08d", ret);
if (ret < 0 || (size_t) ret >= buflen)
return -1;
return ret;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_WPS_OOB
static int wpa_supplicant_ctrl_iface_wps_oob(struct wpa_supplicant *wpa_s,
char *cmd)
{
char *path, *method, *name;
path = os_strchr(cmd, ' ');
if (path == NULL)
return -1;
*path++ = '\0';
method = os_strchr(path, ' ');
if (method == NULL)
return -1;
*method++ = '\0';
name = os_strchr(method, ' ');
if (name != NULL)
*name++ = '\0';
return wpas_wps_start_oob(wpa_s, cmd, path, method, name);
}
#endif /* CONFIG_WPS_OOB */
2009-03-01 22:10:07 +00:00
static int wpa_supplicant_ctrl_iface_wps_reg(struct wpa_supplicant *wpa_s,
char *cmd)
{
u8 bssid[ETH_ALEN], *_bssid = bssid;
char *pin;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
char *new_ssid;
char *new_auth;
char *new_encr;
char *new_key;
struct wps_new_ap_settings ap;
2009-03-01 22:10:07 +00:00
pin = os_strchr(cmd, ' ');
if (pin == NULL)
return -1;
*pin++ = '\0';
if (os_strcmp(cmd, "any") == 0)
_bssid = NULL;
else if (hwaddr_aton(cmd, bssid)) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE WPS_REG: invalid BSSID '%s'",
cmd);
return -1;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
new_ssid = os_strchr(pin, ' ');
if (new_ssid == NULL)
return wpas_wps_start_reg(wpa_s, _bssid, pin, NULL);
*new_ssid++ = '\0';
new_auth = os_strchr(new_ssid, ' ');
if (new_auth == NULL)
return -1;
*new_auth++ = '\0';
new_encr = os_strchr(new_auth, ' ');
if (new_encr == NULL)
return -1;
*new_encr++ = '\0';
new_key = os_strchr(new_encr, ' ');
if (new_key == NULL)
return -1;
*new_key++ = '\0';
os_memset(&ap, 0, sizeof(ap));
ap.ssid_hex = new_ssid;
ap.auth = new_auth;
ap.encr = new_encr;
ap.key_hex = new_key;
return wpas_wps_start_reg(wpa_s, _bssid, pin, &ap);
}
#ifdef CONFIG_WPS_ER
static int wpa_supplicant_ctrl_iface_wps_er_pin(struct wpa_supplicant *wpa_s,
char *cmd)
{
char *uuid = cmd, *pin;
pin = os_strchr(uuid, ' ');
if (pin == NULL)
return -1;
*pin++ = '\0';
return wpas_wps_er_add_pin(wpa_s, uuid, pin);
2009-03-01 22:10:07 +00:00
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
static int wpa_supplicant_ctrl_iface_wps_er_learn(struct wpa_supplicant *wpa_s,
char *cmd)
{
char *uuid = cmd, *pin;
pin = os_strchr(uuid, ' ');
if (pin == NULL)
return -1;
*pin++ = '\0';
return wpas_wps_er_learn(wpa_s, uuid, pin);
}
#endif /* CONFIG_WPS_ER */
2009-03-01 22:10:07 +00:00
#endif /* CONFIG_WPS */
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_IBSS_RSN
static int wpa_supplicant_ctrl_iface_ibss_rsn(
struct wpa_supplicant *wpa_s, char *addr)
{
u8 peer[ETH_ALEN];
if (hwaddr_aton(addr, peer)) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE IBSS_RSN: invalid "
"address '%s'", addr);
return -1;
}
wpa_printf(MSG_DEBUG, "CTRL_IFACE IBSS_RSN " MACSTR,
MAC2STR(peer));
return ibss_rsn_start(wpa_s->ibss_rsn, peer);
}
#endif /* CONFIG_IBSS_RSN */
2009-03-01 22:10:07 +00:00
static int wpa_supplicant_ctrl_iface_ctrl_rsp(struct wpa_supplicant *wpa_s,
char *rsp)
{
#ifdef IEEE8021X_EAPOL
char *pos, *id_pos;
int id;
struct wpa_ssid *ssid;
struct eap_peer_config *eap;
pos = os_strchr(rsp, '-');
if (pos == NULL)
return -1;
*pos++ = '\0';
id_pos = pos;
pos = os_strchr(pos, ':');
if (pos == NULL)
return -1;
*pos++ = '\0';
id = atoi(id_pos);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: field=%s id=%d", rsp, id);
wpa_hexdump_ascii_key(MSG_DEBUG, "CTRL_IFACE: value",
(u8 *) pos, os_strlen(pos));
ssid = wpa_config_get_network(wpa_s->conf, id);
if (ssid == NULL) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Could not find SSID id=%d "
"to update", id);
return -1;
}
eap = &ssid->eap;
if (os_strcmp(rsp, "IDENTITY") == 0) {
os_free(eap->identity);
eap->identity = (u8 *) os_strdup(pos);
eap->identity_len = os_strlen(pos);
eap->pending_req_identity = 0;
if (ssid == wpa_s->current_ssid)
wpa_s->reassociate = 1;
} else if (os_strcmp(rsp, "PASSWORD") == 0) {
os_free(eap->password);
eap->password = (u8 *) os_strdup(pos);
eap->password_len = os_strlen(pos);
eap->pending_req_password = 0;
if (ssid == wpa_s->current_ssid)
wpa_s->reassociate = 1;
} else if (os_strcmp(rsp, "NEW_PASSWORD") == 0) {
os_free(eap->new_password);
eap->new_password = (u8 *) os_strdup(pos);
eap->new_password_len = os_strlen(pos);
eap->pending_req_new_password = 0;
if (ssid == wpa_s->current_ssid)
wpa_s->reassociate = 1;
} else if (os_strcmp(rsp, "PIN") == 0) {
os_free(eap->pin);
eap->pin = os_strdup(pos);
eap->pending_req_pin = 0;
if (ssid == wpa_s->current_ssid)
wpa_s->reassociate = 1;
} else if (os_strcmp(rsp, "OTP") == 0) {
os_free(eap->otp);
eap->otp = (u8 *) os_strdup(pos);
eap->otp_len = os_strlen(pos);
os_free(eap->pending_req_otp);
eap->pending_req_otp = NULL;
eap->pending_req_otp_len = 0;
} else if (os_strcmp(rsp, "PASSPHRASE") == 0) {
os_free(eap->private_key_passwd);
eap->private_key_passwd = (u8 *) os_strdup(pos);
eap->pending_req_passphrase = 0;
if (ssid == wpa_s->current_ssid)
wpa_s->reassociate = 1;
} else {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Unknown field '%s'", rsp);
return -1;
}
return 0;
#else /* IEEE8021X_EAPOL */
wpa_printf(MSG_DEBUG, "CTRL_IFACE: 802.1X not included");
return -1;
#endif /* IEEE8021X_EAPOL */
}
static int wpa_supplicant_ctrl_iface_status(struct wpa_supplicant *wpa_s,
const char *params,
char *buf, size_t buflen)
{
char *pos, *end, tmp[30];
int res, verbose, ret;
verbose = os_strcmp(params, "-VERBOSE") == 0;
pos = buf;
end = buf + buflen;
if (wpa_s->wpa_state >= WPA_ASSOCIATED) {
struct wpa_ssid *ssid = wpa_s->current_ssid;
ret = os_snprintf(pos, end - pos, "bssid=" MACSTR "\n",
MAC2STR(wpa_s->bssid));
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
if (ssid) {
u8 *_ssid = ssid->ssid;
size_t ssid_len = ssid->ssid_len;
u8 ssid_buf[MAX_SSID_LEN];
if (ssid_len == 0) {
int _res = wpa_drv_get_ssid(wpa_s, ssid_buf);
if (_res < 0)
ssid_len = 0;
else
ssid_len = _res;
_ssid = ssid_buf;
}
ret = os_snprintf(pos, end - pos, "ssid=%s\nid=%d\n",
wpa_ssid_txt(_ssid, ssid_len),
ssid->id);
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
if (ssid->id_str) {
ret = os_snprintf(pos, end - pos,
"id_str=%s\n",
ssid->id_str);
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
switch (ssid->mode) {
case WPAS_MODE_INFRA:
ret = os_snprintf(pos, end - pos,
"mode=station\n");
break;
case WPAS_MODE_IBSS:
ret = os_snprintf(pos, end - pos,
"mode=IBSS\n");
break;
case WPAS_MODE_AP:
ret = os_snprintf(pos, end - pos,
"mode=AP\n");
break;
default:
ret = 0;
break;
}
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
2009-03-01 22:10:07 +00:00
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_AP
if (wpa_s->ap_iface) {
pos += ap_ctrl_iface_wpa_get_status(wpa_s, pos,
end - pos,
verbose);
} else
#endif /* CONFIG_AP */
2009-03-01 22:10:07 +00:00
pos += wpa_sm_get_status(wpa_s->wpa, pos, end - pos, verbose);
}
ret = os_snprintf(pos, end - pos, "wpa_state=%s\n",
wpa_supplicant_state_txt(wpa_s->wpa_state));
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
if (wpa_s->l2 &&
l2_packet_get_ip_addr(wpa_s->l2, tmp, sizeof(tmp)) >= 0) {
ret = os_snprintf(pos, end - pos, "ip_address=%s\n", tmp);
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
if (wpa_key_mgmt_wpa_ieee8021x(wpa_s->key_mgmt) ||
wpa_s->key_mgmt == WPA_KEY_MGMT_IEEE8021X_NO_WPA) {
res = eapol_sm_get_status(wpa_s->eapol, pos, end - pos,
verbose);
if (res >= 0)
pos += res;
}
res = rsn_preauth_get_status(wpa_s->wpa, pos, end - pos, verbose);
if (res >= 0)
pos += res;
return pos - buf;
}
static int wpa_supplicant_ctrl_iface_bssid(struct wpa_supplicant *wpa_s,
char *cmd)
{
char *pos;
int id;
struct wpa_ssid *ssid;
u8 bssid[ETH_ALEN];
/* cmd: "<network id> <BSSID>" */
pos = os_strchr(cmd, ' ');
if (pos == NULL)
return -1;
*pos++ = '\0';
id = atoi(cmd);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: id=%d bssid='%s'", id, pos);
if (hwaddr_aton(pos, bssid)) {
wpa_printf(MSG_DEBUG ,"CTRL_IFACE: invalid BSSID '%s'", pos);
return -1;
}
ssid = wpa_config_get_network(wpa_s->conf, id);
if (ssid == NULL) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Could not find SSID id=%d "
"to update", id);
return -1;
}
os_memcpy(ssid->bssid, bssid, ETH_ALEN);
ssid->bssid_set = !is_zero_ether_addr(bssid);
return 0;
}
static int wpa_supplicant_ctrl_iface_list_networks(
struct wpa_supplicant *wpa_s, char *buf, size_t buflen)
{
char *pos, *end;
struct wpa_ssid *ssid;
int ret;
pos = buf;
end = buf + buflen;
ret = os_snprintf(pos, end - pos,
"network id / ssid / bssid / flags\n");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
ssid = wpa_s->conf->ssid;
while (ssid) {
ret = os_snprintf(pos, end - pos, "%d\t%s",
ssid->id,
wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
if (ssid->bssid_set) {
ret = os_snprintf(pos, end - pos, "\t" MACSTR,
MAC2STR(ssid->bssid));
} else {
ret = os_snprintf(pos, end - pos, "\tany");
}
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
ret = os_snprintf(pos, end - pos, "\t%s%s",
ssid == wpa_s->current_ssid ?
"[CURRENT]" : "",
ssid->disabled ? "[DISABLED]" : "");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
ret = os_snprintf(pos, end - pos, "\n");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
ssid = ssid->next;
}
return pos - buf;
}
static char * wpa_supplicant_cipher_txt(char *pos, char *end, int cipher)
{
int first = 1, ret;
ret = os_snprintf(pos, end - pos, "-");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
if (cipher & WPA_CIPHER_NONE) {
ret = os_snprintf(pos, end - pos, "%sNONE", first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
if (cipher & WPA_CIPHER_WEP40) {
ret = os_snprintf(pos, end - pos, "%sWEP40", first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
if (cipher & WPA_CIPHER_WEP104) {
ret = os_snprintf(pos, end - pos, "%sWEP104",
first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
if (cipher & WPA_CIPHER_TKIP) {
ret = os_snprintf(pos, end - pos, "%sTKIP", first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
if (cipher & WPA_CIPHER_CCMP) {
ret = os_snprintf(pos, end - pos, "%sCCMP", first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
return pos;
}
static char * wpa_supplicant_ie_txt(char *pos, char *end, const char *proto,
const u8 *ie, size_t ie_len)
{
struct wpa_ie_data data;
int first, ret;
ret = os_snprintf(pos, end - pos, "[%s-", proto);
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
if (wpa_parse_wpa_ie(ie, ie_len, &data) < 0) {
ret = os_snprintf(pos, end - pos, "?]");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
return pos;
}
first = 1;
if (data.key_mgmt & WPA_KEY_MGMT_IEEE8021X) {
ret = os_snprintf(pos, end - pos, "%sEAP", first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
if (data.key_mgmt & WPA_KEY_MGMT_PSK) {
ret = os_snprintf(pos, end - pos, "%sPSK", first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
if (data.key_mgmt & WPA_KEY_MGMT_WPA_NONE) {
ret = os_snprintf(pos, end - pos, "%sNone", first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
#ifdef CONFIG_IEEE80211R
if (data.key_mgmt & WPA_KEY_MGMT_FT_IEEE8021X) {
ret = os_snprintf(pos, end - pos, "%sFT/EAP",
first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
if (data.key_mgmt & WPA_KEY_MGMT_FT_PSK) {
ret = os_snprintf(pos, end - pos, "%sFT/PSK",
first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
#endif /* CONFIG_IEEE80211R */
#ifdef CONFIG_IEEE80211W
if (data.key_mgmt & WPA_KEY_MGMT_IEEE8021X_SHA256) {
ret = os_snprintf(pos, end - pos, "%sEAP-SHA256",
first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
if (data.key_mgmt & WPA_KEY_MGMT_PSK_SHA256) {
ret = os_snprintf(pos, end - pos, "%sPSK-SHA256",
first ? "" : "+");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
first = 0;
}
#endif /* CONFIG_IEEE80211W */
pos = wpa_supplicant_cipher_txt(pos, end, data.pairwise_cipher);
if (data.capabilities & WPA_CAPABILITY_PREAUTH) {
ret = os_snprintf(pos, end - pos, "-preauth");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
}
ret = os_snprintf(pos, end - pos, "]");
if (ret < 0 || ret >= end - pos)
return pos;
pos += ret;
return pos;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
2009-03-01 22:10:07 +00:00
#ifdef CONFIG_WPS
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
static char * wpa_supplicant_wps_ie_txt_buf(char *pos, char *end,
struct wpabuf *wps_ie)
{
2009-03-01 22:10:07 +00:00
int ret;
const char *txt;
if (wps_ie == NULL)
return pos;
if (wps_is_selected_pbc_registrar(wps_ie))
txt = "[WPS-PBC]";
else if (wps_is_selected_pin_registrar(wps_ie))
txt = "[WPS-PIN]";
else
txt = "[WPS]";
ret = os_snprintf(pos, end - pos, "%s", txt);
if (ret >= 0 && ret < end - pos)
pos += ret;
wpabuf_free(wps_ie);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return pos;
}
2009-03-01 22:10:07 +00:00
#endif /* CONFIG_WPS */
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
static char * wpa_supplicant_wps_ie_txt(char *pos, char *end,
const struct wpa_bss *bss)
{
#ifdef CONFIG_WPS
struct wpabuf *wps_ie;
wps_ie = wpa_bss_get_vendor_ie_multi(bss, WPS_IE_VENDOR_TYPE);
return wpa_supplicant_wps_ie_txt_buf(pos, end, wps_ie);
#else /* CONFIG_WPS */
2009-03-01 22:10:07 +00:00
return pos;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#endif /* CONFIG_WPS */
2009-03-01 22:10:07 +00:00
}
/* Format one result on one text line into a buffer. */
static int wpa_supplicant_ctrl_iface_scan_result(
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
const struct wpa_bss *bss, char *buf, size_t buflen)
2009-03-01 22:10:07 +00:00
{
char *pos, *end;
int ret;
const u8 *ie, *ie2;
pos = buf;
end = buf + buflen;
ret = os_snprintf(pos, end - pos, MACSTR "\t%d\t%d\t",
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
MAC2STR(bss->bssid), bss->freq, bss->level);
2009-03-01 22:10:07 +00:00
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ie = wpa_bss_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE);
2009-03-01 22:10:07 +00:00
if (ie)
pos = wpa_supplicant_ie_txt(pos, end, "WPA", ie, 2 + ie[1]);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ie2 = wpa_bss_get_ie(bss, WLAN_EID_RSN);
2009-03-01 22:10:07 +00:00
if (ie2)
pos = wpa_supplicant_ie_txt(pos, end, "WPA2", ie2, 2 + ie2[1]);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
pos = wpa_supplicant_wps_ie_txt(pos, end, bss);
if (!ie && !ie2 && bss->caps & IEEE80211_CAP_PRIVACY) {
2009-03-01 22:10:07 +00:00
ret = os_snprintf(pos, end - pos, "[WEP]");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (bss->caps & IEEE80211_CAP_IBSS) {
2009-03-01 22:10:07 +00:00
ret = os_snprintf(pos, end - pos, "[IBSS]");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (bss->caps & IEEE80211_CAP_ESS) {
ret = os_snprintf(pos, end - pos, "[ESS]");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
2009-03-01 22:10:07 +00:00
ret = os_snprintf(pos, end - pos, "\t%s",
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_ssid_txt(bss->ssid, bss->ssid_len));
2009-03-01 22:10:07 +00:00
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
ret = os_snprintf(pos, end - pos, "\n");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
return pos - buf;
}
static int wpa_supplicant_ctrl_iface_scan_results(
struct wpa_supplicant *wpa_s, char *buf, size_t buflen)
{
char *pos, *end;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
struct wpa_bss *bss;
2009-03-01 22:10:07 +00:00
int ret;
pos = buf;
end = buf + buflen;
ret = os_snprintf(pos, end - pos, "bssid / frequency / signal level / "
"flags / ssid\n");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
dl_list_for_each(bss, &wpa_s->bss_id, struct wpa_bss, list_id) {
ret = wpa_supplicant_ctrl_iface_scan_result(bss, pos,
2009-03-01 22:10:07 +00:00
end - pos);
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
return pos - buf;
}
static int wpa_supplicant_ctrl_iface_select_network(
struct wpa_supplicant *wpa_s, char *cmd)
{
int id;
struct wpa_ssid *ssid;
/* cmd: "<network id>" or "any" */
if (os_strcmp(cmd, "any") == 0) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: SELECT_NETWORK any");
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ssid = NULL;
} else {
id = atoi(cmd);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: SELECT_NETWORK id=%d", id);
2009-03-01 22:10:07 +00:00
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ssid = wpa_config_get_network(wpa_s->conf, id);
if (ssid == NULL) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Could not find "
"network id=%d", id);
return -1;
}
2009-03-01 22:10:07 +00:00
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_supplicant_select_network(wpa_s, ssid);
2009-03-01 22:10:07 +00:00
return 0;
}
static int wpa_supplicant_ctrl_iface_enable_network(
struct wpa_supplicant *wpa_s, char *cmd)
{
int id;
struct wpa_ssid *ssid;
/* cmd: "<network id>" or "all" */
if (os_strcmp(cmd, "all") == 0) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: ENABLE_NETWORK all");
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ssid = NULL;
} else {
id = atoi(cmd);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: ENABLE_NETWORK id=%d", id);
2009-03-01 22:10:07 +00:00
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ssid = wpa_config_get_network(wpa_s->conf, id);
if (ssid == NULL) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Could not find "
"network id=%d", id);
return -1;
}
2009-03-01 22:10:07 +00:00
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_supplicant_enable_network(wpa_s, ssid);
2009-03-01 22:10:07 +00:00
return 0;
}
static int wpa_supplicant_ctrl_iface_disable_network(
struct wpa_supplicant *wpa_s, char *cmd)
{
int id;
struct wpa_ssid *ssid;
/* cmd: "<network id>" or "all" */
if (os_strcmp(cmd, "all") == 0) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: DISABLE_NETWORK all");
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ssid = NULL;
} else {
id = atoi(cmd);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: DISABLE_NETWORK id=%d", id);
2009-03-01 22:10:07 +00:00
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ssid = wpa_config_get_network(wpa_s->conf, id);
if (ssid == NULL) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Could not find "
"network id=%d", id);
return -1;
}
2009-03-01 22:10:07 +00:00
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_supplicant_disable_network(wpa_s, ssid);
2009-03-01 22:10:07 +00:00
return 0;
}
static int wpa_supplicant_ctrl_iface_add_network(
struct wpa_supplicant *wpa_s, char *buf, size_t buflen)
{
struct wpa_ssid *ssid;
int ret;
wpa_printf(MSG_DEBUG, "CTRL_IFACE: ADD_NETWORK");
ssid = wpa_config_add_network(wpa_s->conf);
if (ssid == NULL)
return -1;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpas_notify_network_added(wpa_s, ssid);
2009-03-01 22:10:07 +00:00
ssid->disabled = 1;
wpa_config_set_network_defaults(ssid);
ret = os_snprintf(buf, buflen, "%d\n", ssid->id);
if (ret < 0 || (size_t) ret >= buflen)
return -1;
return ret;
}
static int wpa_supplicant_ctrl_iface_remove_network(
struct wpa_supplicant *wpa_s, char *cmd)
{
int id;
struct wpa_ssid *ssid;
/* cmd: "<network id>" or "all" */
if (os_strcmp(cmd, "all") == 0) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: REMOVE_NETWORK all");
ssid = wpa_s->conf->ssid;
while (ssid) {
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
struct wpa_ssid *remove_ssid = ssid;
2009-03-01 22:10:07 +00:00
id = ssid->id;
ssid = ssid->next;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpas_notify_network_removed(wpa_s, remove_ssid);
2009-03-01 22:10:07 +00:00
wpa_config_remove_network(wpa_s->conf, id);
}
if (wpa_s->current_ssid) {
eapol_sm_invalidate_cached_session(wpa_s->eapol);
wpa_supplicant_disassociate(wpa_s,
WLAN_REASON_DEAUTH_LEAVING);
}
return 0;
}
id = atoi(cmd);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: REMOVE_NETWORK id=%d", id);
ssid = wpa_config_get_network(wpa_s->conf, id);
if (ssid == NULL ||
wpa_config_remove_network(wpa_s->conf, id) < 0) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Could not find network "
"id=%d", id);
return -1;
}
if (ssid == wpa_s->current_ssid) {
/*
* Invalidate the EAP session cache if the current network is
* removed.
*/
eapol_sm_invalidate_cached_session(wpa_s->eapol);
wpa_supplicant_disassociate(wpa_s, WLAN_REASON_DEAUTH_LEAVING);
}
return 0;
}
static int wpa_supplicant_ctrl_iface_set_network(
struct wpa_supplicant *wpa_s, char *cmd)
{
int id;
struct wpa_ssid *ssid;
char *name, *value;
/* cmd: "<network id> <variable name> <value>" */
name = os_strchr(cmd, ' ');
if (name == NULL)
return -1;
*name++ = '\0';
value = os_strchr(name, ' ');
if (value == NULL)
return -1;
*value++ = '\0';
id = atoi(cmd);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: SET_NETWORK id=%d name='%s'",
id, name);
wpa_hexdump_ascii_key(MSG_DEBUG, "CTRL_IFACE: value",
(u8 *) value, os_strlen(value));
ssid = wpa_config_get_network(wpa_s->conf, id);
if (ssid == NULL) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Could not find network "
"id=%d", id);
return -1;
}
if (wpa_config_set(ssid, name, value, 0) < 0) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Failed to set network "
"variable '%s'", name);
return -1;
}
if (wpa_s->current_ssid == ssid) {
/*
* Invalidate the EAP session cache if anything in the current
* configuration changes.
*/
eapol_sm_invalidate_cached_session(wpa_s->eapol);
}
if ((os_strcmp(name, "psk") == 0 &&
value[0] == '"' && ssid->ssid_len) ||
(os_strcmp(name, "ssid") == 0 && ssid->passphrase))
wpa_config_update_psk(ssid);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
else if (os_strcmp(name, "priority") == 0)
wpa_config_update_prio_list(wpa_s->conf);
2009-03-01 22:10:07 +00:00
return 0;
}
static int wpa_supplicant_ctrl_iface_get_network(
struct wpa_supplicant *wpa_s, char *cmd, char *buf, size_t buflen)
{
int id;
size_t res;
struct wpa_ssid *ssid;
char *name, *value;
/* cmd: "<network id> <variable name>" */
name = os_strchr(cmd, ' ');
if (name == NULL || buflen == 0)
return -1;
*name++ = '\0';
id = atoi(cmd);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: GET_NETWORK id=%d name='%s'",
id, name);
ssid = wpa_config_get_network(wpa_s->conf, id);
if (ssid == NULL) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Could not find network "
"id=%d", id);
return -1;
}
value = wpa_config_get_no_key(ssid, name);
if (value == NULL) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Failed to get network "
"variable '%s'", name);
return -1;
}
res = os_strlcpy(buf, value, buflen);
if (res >= buflen) {
os_free(value);
return -1;
}
os_free(value);
return res;
}
#ifndef CONFIG_NO_CONFIG_WRITE
static int wpa_supplicant_ctrl_iface_save_config(struct wpa_supplicant *wpa_s)
{
int ret;
if (!wpa_s->conf->update_config) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: SAVE_CONFIG - Not allowed "
"to update configuration (update_config=0)");
return -1;
}
ret = wpa_config_write(wpa_s->confname, wpa_s->conf);
if (ret) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: SAVE_CONFIG - Failed to "
"update configuration");
} else {
wpa_printf(MSG_DEBUG, "CTRL_IFACE: SAVE_CONFIG - Configuration"
" updated");
}
return ret;
}
#endif /* CONFIG_NO_CONFIG_WRITE */
static int ctrl_iface_get_capability_pairwise(int res, char *strict,
struct wpa_driver_capa *capa,
char *buf, size_t buflen)
{
int ret, first = 1;
char *pos, *end;
size_t len;
pos = buf;
end = pos + buflen;
if (res < 0) {
if (strict)
return 0;
len = os_strlcpy(buf, "CCMP TKIP NONE", buflen);
if (len >= buflen)
return -1;
return len;
}
if (capa->enc & WPA_DRIVER_CAPA_ENC_CCMP) {
ret = os_snprintf(pos, end - pos, "%sCCMP", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
if (capa->enc & WPA_DRIVER_CAPA_ENC_TKIP) {
ret = os_snprintf(pos, end - pos, "%sTKIP", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
if (capa->key_mgmt & WPA_DRIVER_CAPA_KEY_MGMT_WPA_NONE) {
ret = os_snprintf(pos, end - pos, "%sNONE", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
return pos - buf;
}
static int ctrl_iface_get_capability_group(int res, char *strict,
struct wpa_driver_capa *capa,
char *buf, size_t buflen)
{
int ret, first = 1;
char *pos, *end;
size_t len;
pos = buf;
end = pos + buflen;
if (res < 0) {
if (strict)
return 0;
len = os_strlcpy(buf, "CCMP TKIP WEP104 WEP40", buflen);
if (len >= buflen)
return -1;
return len;
}
if (capa->enc & WPA_DRIVER_CAPA_ENC_CCMP) {
ret = os_snprintf(pos, end - pos, "%sCCMP", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
if (capa->enc & WPA_DRIVER_CAPA_ENC_TKIP) {
ret = os_snprintf(pos, end - pos, "%sTKIP", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
if (capa->enc & WPA_DRIVER_CAPA_ENC_WEP104) {
ret = os_snprintf(pos, end - pos, "%sWEP104",
first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
if (capa->enc & WPA_DRIVER_CAPA_ENC_WEP40) {
ret = os_snprintf(pos, end - pos, "%sWEP40", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
return pos - buf;
}
static int ctrl_iface_get_capability_key_mgmt(int res, char *strict,
struct wpa_driver_capa *capa,
char *buf, size_t buflen)
{
int ret;
char *pos, *end;
size_t len;
pos = buf;
end = pos + buflen;
if (res < 0) {
if (strict)
return 0;
len = os_strlcpy(buf, "WPA-PSK WPA-EAP IEEE8021X WPA-NONE "
"NONE", buflen);
if (len >= buflen)
return -1;
return len;
}
ret = os_snprintf(pos, end - pos, "NONE IEEE8021X");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
if (capa->key_mgmt & (WPA_DRIVER_CAPA_KEY_MGMT_WPA |
WPA_DRIVER_CAPA_KEY_MGMT_WPA2)) {
ret = os_snprintf(pos, end - pos, " WPA-EAP");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
if (capa->key_mgmt & (WPA_DRIVER_CAPA_KEY_MGMT_WPA_PSK |
WPA_DRIVER_CAPA_KEY_MGMT_WPA2_PSK)) {
ret = os_snprintf(pos, end - pos, " WPA-PSK");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
if (capa->key_mgmt & WPA_DRIVER_CAPA_KEY_MGMT_WPA_NONE) {
ret = os_snprintf(pos, end - pos, " WPA-NONE");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
return pos - buf;
}
static int ctrl_iface_get_capability_proto(int res, char *strict,
struct wpa_driver_capa *capa,
char *buf, size_t buflen)
{
int ret, first = 1;
char *pos, *end;
size_t len;
pos = buf;
end = pos + buflen;
if (res < 0) {
if (strict)
return 0;
len = os_strlcpy(buf, "RSN WPA", buflen);
if (len >= buflen)
return -1;
return len;
}
if (capa->key_mgmt & (WPA_DRIVER_CAPA_KEY_MGMT_WPA2 |
WPA_DRIVER_CAPA_KEY_MGMT_WPA2_PSK)) {
ret = os_snprintf(pos, end - pos, "%sRSN", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
if (capa->key_mgmt & (WPA_DRIVER_CAPA_KEY_MGMT_WPA |
WPA_DRIVER_CAPA_KEY_MGMT_WPA_PSK)) {
ret = os_snprintf(pos, end - pos, "%sWPA", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
return pos - buf;
}
static int ctrl_iface_get_capability_auth_alg(int res, char *strict,
struct wpa_driver_capa *capa,
char *buf, size_t buflen)
{
int ret, first = 1;
char *pos, *end;
size_t len;
pos = buf;
end = pos + buflen;
if (res < 0) {
if (strict)
return 0;
len = os_strlcpy(buf, "OPEN SHARED LEAP", buflen);
if (len >= buflen)
return -1;
return len;
}
if (capa->auth & (WPA_DRIVER_AUTH_OPEN)) {
ret = os_snprintf(pos, end - pos, "%sOPEN", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
if (capa->auth & (WPA_DRIVER_AUTH_SHARED)) {
ret = os_snprintf(pos, end - pos, "%sSHARED",
first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
if (capa->auth & (WPA_DRIVER_AUTH_LEAP)) {
ret = os_snprintf(pos, end - pos, "%sLEAP", first ? "" : " ");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
first = 0;
}
return pos - buf;
}
static int wpa_supplicant_ctrl_iface_get_capability(
struct wpa_supplicant *wpa_s, const char *_field, char *buf,
size_t buflen)
{
struct wpa_driver_capa capa;
int res;
char *strict;
char field[30];
size_t len;
/* Determine whether or not strict checking was requested */
len = os_strlcpy(field, _field, sizeof(field));
if (len >= sizeof(field))
return -1;
strict = os_strchr(field, ' ');
if (strict != NULL) {
*strict++ = '\0';
if (os_strcmp(strict, "strict") != 0)
return -1;
}
wpa_printf(MSG_DEBUG, "CTRL_IFACE: GET_CAPABILITY '%s' %s",
field, strict ? strict : "");
if (os_strcmp(field, "eap") == 0) {
return eap_get_names(buf, buflen);
}
res = wpa_drv_get_capa(wpa_s, &capa);
if (os_strcmp(field, "pairwise") == 0)
return ctrl_iface_get_capability_pairwise(res, strict, &capa,
buf, buflen);
if (os_strcmp(field, "group") == 0)
return ctrl_iface_get_capability_group(res, strict, &capa,
buf, buflen);
if (os_strcmp(field, "key_mgmt") == 0)
return ctrl_iface_get_capability_key_mgmt(res, strict, &capa,
buf, buflen);
if (os_strcmp(field, "proto") == 0)
return ctrl_iface_get_capability_proto(res, strict, &capa,
buf, buflen);
if (os_strcmp(field, "auth_alg") == 0)
return ctrl_iface_get_capability_auth_alg(res, strict, &capa,
buf, buflen);
wpa_printf(MSG_DEBUG, "CTRL_IFACE: Unknown GET_CAPABILITY field '%s'",
field);
return -1;
}
static int wpa_supplicant_ctrl_iface_bss(struct wpa_supplicant *wpa_s,
const char *cmd, char *buf,
size_t buflen)
{
u8 bssid[ETH_ALEN];
size_t i;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
struct wpa_bss *bss;
2009-03-01 22:10:07 +00:00
int ret;
char *pos, *end;
const u8 *ie, *ie2;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (os_strcmp(cmd, "FIRST") == 0)
bss = dl_list_first(&wpa_s->bss, struct wpa_bss, list);
else if (os_strncmp(cmd, "ID-", 3) == 0) {
i = atoi(cmd + 3);
bss = wpa_bss_get_id(wpa_s, i);
} else if (os_strncmp(cmd, "NEXT-", 5) == 0) {
i = atoi(cmd + 5);
bss = wpa_bss_get_id(wpa_s, i);
if (bss) {
struct dl_list *next = bss->list_id.next;
if (next == &wpa_s->bss_id)
bss = NULL;
else
bss = dl_list_entry(next, struct wpa_bss,
list_id);
2009-03-01 22:10:07 +00:00
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
} else if (hwaddr_aton(cmd, bssid) == 0)
bss = wpa_bss_get_bssid(wpa_s, bssid);
else {
struct wpa_bss *tmp;
2009-03-01 22:10:07 +00:00
i = atoi(cmd);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
bss = NULL;
dl_list_for_each(tmp, &wpa_s->bss_id, struct wpa_bss, list_id)
{
if (i-- == 0) {
bss = tmp;
break;
}
}
}
2009-03-01 22:10:07 +00:00
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (bss == NULL)
return 0;
2009-03-01 22:10:07 +00:00
pos = buf;
end = buf + buflen;
ret = os_snprintf(pos, end - pos,
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
"id=%u\n"
2009-03-01 22:10:07 +00:00
"bssid=" MACSTR "\n"
"freq=%d\n"
"beacon_int=%d\n"
"capabilities=0x%04x\n"
"qual=%d\n"
"noise=%d\n"
"level=%d\n"
"tsf=%016llu\n"
"ie=",
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
bss->id,
2009-03-01 22:10:07 +00:00
MAC2STR(bss->bssid), bss->freq, bss->beacon_int,
bss->caps, bss->qual, bss->noise, bss->level,
(unsigned long long) bss->tsf);
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
ie = (const u8 *) (bss + 1);
for (i = 0; i < bss->ie_len; i++) {
ret = os_snprintf(pos, end - pos, "%02x", *ie++);
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
ret = os_snprintf(pos, end - pos, "\n");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
ret = os_snprintf(pos, end - pos, "flags=");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ie = wpa_bss_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE);
2009-03-01 22:10:07 +00:00
if (ie)
pos = wpa_supplicant_ie_txt(pos, end, "WPA", ie, 2 + ie[1]);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
ie2 = wpa_bss_get_ie(bss, WLAN_EID_RSN);
2009-03-01 22:10:07 +00:00
if (ie2)
pos = wpa_supplicant_ie_txt(pos, end, "WPA2", ie2, 2 + ie2[1]);
pos = wpa_supplicant_wps_ie_txt(pos, end, bss);
if (!ie && !ie2 && bss->caps & IEEE80211_CAP_PRIVACY) {
ret = os_snprintf(pos, end - pos, "[WEP]");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
if (bss->caps & IEEE80211_CAP_IBSS) {
ret = os_snprintf(pos, end - pos, "[IBSS]");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
if (bss->caps & IEEE80211_CAP_ESS) {
ret = os_snprintf(pos, end - pos, "[ESS]");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
}
2009-03-01 22:10:07 +00:00
ret = os_snprintf(pos, end - pos, "\n");
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
ret = os_snprintf(pos, end - pos, "ssid=%s\n",
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_ssid_txt(bss->ssid, bss->ssid_len));
2009-03-01 22:10:07 +00:00
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_WPS
ie = (const u8 *) (bss + 1);
ret = wpas_wps_scan_result_text(ie, bss->ie_len, pos, end);
if (ret < 0 || ret >= end - pos)
return pos - buf;
pos += ret;
#endif /* CONFIG_WPS */
2009-03-01 22:10:07 +00:00
return pos - buf;
}
static int wpa_supplicant_ctrl_iface_ap_scan(
struct wpa_supplicant *wpa_s, char *cmd)
{
int ap_scan = atoi(cmd);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
return wpa_supplicant_set_ap_scan(wpa_s, ap_scan);
}
static void wpa_supplicant_ctrl_iface_drop_sa(struct wpa_supplicant *wpa_s)
{
u8 *bcast = (u8 *) "\xff\xff\xff\xff\xff\xff";
wpa_printf(MSG_DEBUG, "Dropping SA without deauthentication");
/* MLME-DELETEKEYS.request */
wpa_drv_set_key(wpa_s, WPA_ALG_NONE, bcast, 0, 0, NULL, 0, NULL, 0);
wpa_drv_set_key(wpa_s, WPA_ALG_NONE, bcast, 1, 0, NULL, 0, NULL, 0);
wpa_drv_set_key(wpa_s, WPA_ALG_NONE, bcast, 2, 0, NULL, 0, NULL, 0);
wpa_drv_set_key(wpa_s, WPA_ALG_NONE, bcast, 3, 0, NULL, 0, NULL, 0);
#ifdef CONFIG_IEEE80211W
wpa_drv_set_key(wpa_s, WPA_ALG_NONE, bcast, 4, 0, NULL, 0, NULL, 0);
wpa_drv_set_key(wpa_s, WPA_ALG_NONE, bcast, 5, 0, NULL, 0, NULL, 0);
#endif /* CONFIG_IEEE80211W */
wpa_drv_set_key(wpa_s, WPA_ALG_NONE, wpa_s->bssid, 0, 0, NULL, 0, NULL,
0);
/* MLME-SETPROTECTION.request(None) */
wpa_drv_mlme_setprotection(wpa_s, wpa_s->bssid,
MLME_SETPROTECTION_PROTECT_TYPE_NONE,
MLME_SETPROTECTION_KEY_TYPE_PAIRWISE);
wpa_sm_drop_sa(wpa_s->wpa);
}
2009-03-01 22:10:07 +00:00
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
static int wpa_supplicant_ctrl_iface_roam(struct wpa_supplicant *wpa_s,
char *addr)
{
u8 bssid[ETH_ALEN];
struct wpa_bss *bss;
struct wpa_ssid *ssid = wpa_s->current_ssid;
if (hwaddr_aton(addr, bssid)) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE ROAM: invalid "
"address '%s'", addr);
return -1;
}
wpa_printf(MSG_DEBUG, "CTRL_IFACE ROAM " MACSTR, MAC2STR(bssid));
bss = wpa_bss_get_bssid(wpa_s, bssid);
if (!bss) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE ROAM: Target AP not found "
"from BSS table");
return -1;
}
/*
* TODO: Find best network configuration block from configuration to
* allow roaming to other networks
*/
if (!ssid) {
wpa_printf(MSG_DEBUG, "CTRL_IFACE ROAM: No network "
"configuration known for the target AP");
2009-03-01 22:10:07 +00:00
return -1;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
}
wpa_s->reassociate = 1;
wpa_supplicant_connect(wpa_s, bss, ssid);
2009-03-01 22:10:07 +00:00
return 0;
}
char * wpa_supplicant_ctrl_iface_process(struct wpa_supplicant *wpa_s,
char *buf, size_t *resp_len)
{
char *reply;
const int reply_size = 2048;
int ctrl_rsp = 0;
int reply_len;
if (os_strncmp(buf, WPA_CTRL_RSP, os_strlen(WPA_CTRL_RSP)) == 0 ||
os_strncmp(buf, "SET_NETWORK ", 12) == 0) {
wpa_hexdump_ascii_key(MSG_DEBUG, "RX ctrl_iface",
(const u8 *) buf, os_strlen(buf));
} else {
wpa_hexdump_ascii(MSG_DEBUG, "RX ctrl_iface",
(const u8 *) buf, os_strlen(buf));
}
reply = os_malloc(reply_size);
if (reply == NULL) {
*resp_len = 1;
return NULL;
}
os_memcpy(reply, "OK\n", 3);
reply_len = 3;
if (os_strcmp(buf, "PING") == 0) {
os_memcpy(reply, "PONG\n", 5);
reply_len = 5;
} else if (os_strcmp(buf, "MIB") == 0) {
reply_len = wpa_sm_get_mib(wpa_s->wpa, reply, reply_size);
if (reply_len >= 0) {
int res;
res = eapol_sm_get_mib(wpa_s->eapol, reply + reply_len,
reply_size - reply_len);
if (res < 0)
reply_len = -1;
else
reply_len += res;
}
} else if (os_strncmp(buf, "STATUS", 6) == 0) {
reply_len = wpa_supplicant_ctrl_iface_status(
wpa_s, buf + 6, reply, reply_size);
} else if (os_strcmp(buf, "PMKSA") == 0) {
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
reply_len = wpa_sm_pmksa_cache_list(wpa_s->wpa, reply,
reply_size);
2009-03-01 22:10:07 +00:00
} else if (os_strncmp(buf, "SET ", 4) == 0) {
if (wpa_supplicant_ctrl_iface_set(wpa_s, buf + 4))
reply_len = -1;
} else if (os_strcmp(buf, "LOGON") == 0) {
eapol_sm_notify_logoff(wpa_s->eapol, FALSE);
} else if (os_strcmp(buf, "LOGOFF") == 0) {
eapol_sm_notify_logoff(wpa_s->eapol, TRUE);
} else if (os_strcmp(buf, "REASSOCIATE") == 0) {
wpa_s->disconnected = 0;
wpa_s->reassociate = 1;
wpa_supplicant_req_scan(wpa_s, 0, 0);
} else if (os_strcmp(buf, "RECONNECT") == 0) {
if (wpa_s->disconnected) {
wpa_s->disconnected = 0;
wpa_s->reassociate = 1;
wpa_supplicant_req_scan(wpa_s, 0, 0);
}
#ifdef IEEE8021X_EAPOL
} else if (os_strncmp(buf, "PREAUTH ", 8) == 0) {
if (wpa_supplicant_ctrl_iface_preauth(wpa_s, buf + 8))
reply_len = -1;
#endif /* IEEE8021X_EAPOL */
#ifdef CONFIG_PEERKEY
} else if (os_strncmp(buf, "STKSTART ", 9) == 0) {
if (wpa_supplicant_ctrl_iface_stkstart(wpa_s, buf + 9))
reply_len = -1;
#endif /* CONFIG_PEERKEY */
#ifdef CONFIG_IEEE80211R
} else if (os_strncmp(buf, "FT_DS ", 6) == 0) {
if (wpa_supplicant_ctrl_iface_ft_ds(wpa_s, buf + 6))
reply_len = -1;
#endif /* CONFIG_IEEE80211R */
#ifdef CONFIG_WPS
} else if (os_strcmp(buf, "WPS_PBC") == 0) {
if (wpa_supplicant_ctrl_iface_wps_pbc(wpa_s, NULL))
reply_len = -1;
} else if (os_strncmp(buf, "WPS_PBC ", 8) == 0) {
if (wpa_supplicant_ctrl_iface_wps_pbc(wpa_s, buf + 8))
reply_len = -1;
} else if (os_strncmp(buf, "WPS_PIN ", 8) == 0) {
reply_len = wpa_supplicant_ctrl_iface_wps_pin(wpa_s, buf + 8,
reply,
reply_size);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_WPS_OOB
} else if (os_strncmp(buf, "WPS_OOB ", 8) == 0) {
if (wpa_supplicant_ctrl_iface_wps_oob(wpa_s, buf + 8))
reply_len = -1;
#endif /* CONFIG_WPS_OOB */
2009-03-01 22:10:07 +00:00
} else if (os_strncmp(buf, "WPS_REG ", 8) == 0) {
if (wpa_supplicant_ctrl_iface_wps_reg(wpa_s, buf + 8))
reply_len = -1;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_WPS_ER
} else if (os_strcmp(buf, "WPS_ER_START") == 0) {
if (wpas_wps_er_start(wpa_s))
reply_len = -1;
} else if (os_strcmp(buf, "WPS_ER_STOP") == 0) {
if (wpas_wps_er_stop(wpa_s))
reply_len = -1;
} else if (os_strncmp(buf, "WPS_ER_PIN ", 11) == 0) {
if (wpa_supplicant_ctrl_iface_wps_er_pin(wpa_s, buf + 11))
reply_len = -1;
} else if (os_strncmp(buf, "WPS_ER_PBC ", 11) == 0) {
if (wpas_wps_er_pbc(wpa_s, buf + 11))
reply_len = -1;
} else if (os_strncmp(buf, "WPS_ER_LEARN ", 13) == 0) {
if (wpa_supplicant_ctrl_iface_wps_er_learn(wpa_s, buf + 13))
reply_len = -1;
#endif /* CONFIG_WPS_ER */
2009-03-01 22:10:07 +00:00
#endif /* CONFIG_WPS */
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_IBSS_RSN
} else if (os_strncmp(buf, "IBSS_RSN ", 9) == 0) {
if (wpa_supplicant_ctrl_iface_ibss_rsn(wpa_s, buf + 9))
reply_len = -1;
#endif /* CONFIG_IBSS_RSN */
2009-03-01 22:10:07 +00:00
} else if (os_strncmp(buf, WPA_CTRL_RSP, os_strlen(WPA_CTRL_RSP)) == 0)
{
if (wpa_supplicant_ctrl_iface_ctrl_rsp(
wpa_s, buf + os_strlen(WPA_CTRL_RSP)))
reply_len = -1;
else
ctrl_rsp = 1;
} else if (os_strcmp(buf, "RECONFIGURE") == 0) {
if (wpa_supplicant_reload_configuration(wpa_s))
reply_len = -1;
} else if (os_strcmp(buf, "TERMINATE") == 0) {
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_supplicant_terminate_proc(wpa_s->global);
2009-03-01 22:10:07 +00:00
} else if (os_strncmp(buf, "BSSID ", 6) == 0) {
if (wpa_supplicant_ctrl_iface_bssid(wpa_s, buf + 6))
reply_len = -1;
} else if (os_strcmp(buf, "LIST_NETWORKS") == 0) {
reply_len = wpa_supplicant_ctrl_iface_list_networks(
wpa_s, reply, reply_size);
} else if (os_strcmp(buf, "DISCONNECT") == 0) {
wpa_s->reassociate = 0;
wpa_s->disconnected = 1;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_supplicant_deauthenticate(wpa_s,
WLAN_REASON_DEAUTH_LEAVING);
2009-03-01 22:10:07 +00:00
} else if (os_strcmp(buf, "SCAN") == 0) {
wpa_s->scan_req = 2;
wpa_supplicant_req_scan(wpa_s, 0, 0);
} else if (os_strcmp(buf, "SCAN_RESULTS") == 0) {
reply_len = wpa_supplicant_ctrl_iface_scan_results(
wpa_s, reply, reply_size);
} else if (os_strncmp(buf, "SELECT_NETWORK ", 15) == 0) {
if (wpa_supplicant_ctrl_iface_select_network(wpa_s, buf + 15))
reply_len = -1;
} else if (os_strncmp(buf, "ENABLE_NETWORK ", 15) == 0) {
if (wpa_supplicant_ctrl_iface_enable_network(wpa_s, buf + 15))
reply_len = -1;
} else if (os_strncmp(buf, "DISABLE_NETWORK ", 16) == 0) {
if (wpa_supplicant_ctrl_iface_disable_network(wpa_s, buf + 16))
reply_len = -1;
} else if (os_strcmp(buf, "ADD_NETWORK") == 0) {
reply_len = wpa_supplicant_ctrl_iface_add_network(
wpa_s, reply, reply_size);
} else if (os_strncmp(buf, "REMOVE_NETWORK ", 15) == 0) {
if (wpa_supplicant_ctrl_iface_remove_network(wpa_s, buf + 15))
reply_len = -1;
} else if (os_strncmp(buf, "SET_NETWORK ", 12) == 0) {
if (wpa_supplicant_ctrl_iface_set_network(wpa_s, buf + 12))
reply_len = -1;
} else if (os_strncmp(buf, "GET_NETWORK ", 12) == 0) {
reply_len = wpa_supplicant_ctrl_iface_get_network(
wpa_s, buf + 12, reply, reply_size);
#ifndef CONFIG_NO_CONFIG_WRITE
} else if (os_strcmp(buf, "SAVE_CONFIG") == 0) {
if (wpa_supplicant_ctrl_iface_save_config(wpa_s))
reply_len = -1;
#endif /* CONFIG_NO_CONFIG_WRITE */
} else if (os_strncmp(buf, "GET_CAPABILITY ", 15) == 0) {
reply_len = wpa_supplicant_ctrl_iface_get_capability(
wpa_s, buf + 15, reply, reply_size);
} else if (os_strncmp(buf, "AP_SCAN ", 8) == 0) {
if (wpa_supplicant_ctrl_iface_ap_scan(wpa_s, buf + 8))
reply_len = -1;
} else if (os_strcmp(buf, "INTERFACE_LIST") == 0) {
reply_len = wpa_supplicant_global_iface_list(
wpa_s->global, reply, reply_size);
} else if (os_strcmp(buf, "INTERFACES") == 0) {
reply_len = wpa_supplicant_global_iface_interfaces(
wpa_s->global, reply, reply_size);
} else if (os_strncmp(buf, "BSS ", 4) == 0) {
reply_len = wpa_supplicant_ctrl_iface_bss(
wpa_s, buf + 4, reply, reply_size);
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
#ifdef CONFIG_AP
} else if (os_strcmp(buf, "STA-FIRST") == 0) {
reply_len = ap_ctrl_iface_sta_first(wpa_s, reply, reply_size);
} else if (os_strncmp(buf, "STA ", 4) == 0) {
reply_len = ap_ctrl_iface_sta(wpa_s, buf + 4, reply,
reply_size);
} else if (os_strncmp(buf, "STA-NEXT ", 9) == 0) {
reply_len = ap_ctrl_iface_sta_next(wpa_s, buf + 9, reply,
reply_size);
#endif /* CONFIG_AP */
} else if (os_strcmp(buf, "SUSPEND") == 0) {
wpas_notify_suspend(wpa_s->global);
} else if (os_strcmp(buf, "RESUME") == 0) {
wpas_notify_resume(wpa_s->global);
} else if (os_strcmp(buf, "DROP_SA") == 0) {
wpa_supplicant_ctrl_iface_drop_sa(wpa_s);
} else if (os_strncmp(buf, "ROAM ", 5) == 0) {
if (wpa_supplicant_ctrl_iface_roam(wpa_s, buf + 5))
reply_len = -1;
2009-03-01 22:10:07 +00:00
} else {
os_memcpy(reply, "UNKNOWN COMMAND\n", 16);
reply_len = 16;
}
if (reply_len < 0) {
os_memcpy(reply, "FAIL\n", 5);
reply_len = 5;
}
if (ctrl_rsp)
eapol_sm_notify_ctrl_response(wpa_s->eapol);
*resp_len = reply_len;
return reply;
}
static int wpa_supplicant_global_iface_add(struct wpa_global *global,
char *cmd)
{
struct wpa_interface iface;
char *pos;
/*
* <ifname>TAB<confname>TAB<driver>TAB<ctrl_interface>TAB<driver_param>
* TAB<bridge_ifname>
*/
wpa_printf(MSG_DEBUG, "CTRL_IFACE GLOBAL INTERFACE_ADD '%s'", cmd);
os_memset(&iface, 0, sizeof(iface));
do {
iface.ifname = pos = cmd;
pos = os_strchr(pos, '\t');
if (pos)
*pos++ = '\0';
if (iface.ifname[0] == '\0')
return -1;
if (pos == NULL)
break;
iface.confname = pos;
pos = os_strchr(pos, '\t');
if (pos)
*pos++ = '\0';
if (iface.confname[0] == '\0')
iface.confname = NULL;
if (pos == NULL)
break;
iface.driver = pos;
pos = os_strchr(pos, '\t');
if (pos)
*pos++ = '\0';
if (iface.driver[0] == '\0')
iface.driver = NULL;
if (pos == NULL)
break;
iface.ctrl_interface = pos;
pos = os_strchr(pos, '\t');
if (pos)
*pos++ = '\0';
if (iface.ctrl_interface[0] == '\0')
iface.ctrl_interface = NULL;
if (pos == NULL)
break;
iface.driver_param = pos;
pos = os_strchr(pos, '\t');
if (pos)
*pos++ = '\0';
if (iface.driver_param[0] == '\0')
iface.driver_param = NULL;
if (pos == NULL)
break;
iface.bridge_ifname = pos;
pos = os_strchr(pos, '\t');
if (pos)
*pos++ = '\0';
if (iface.bridge_ifname[0] == '\0')
iface.bridge_ifname = NULL;
if (pos == NULL)
break;
} while (0);
if (wpa_supplicant_get_iface(global, iface.ifname))
return -1;
return wpa_supplicant_add_iface(global, &iface) ? 0 : -1;
}
static int wpa_supplicant_global_iface_remove(struct wpa_global *global,
char *cmd)
{
struct wpa_supplicant *wpa_s;
wpa_printf(MSG_DEBUG, "CTRL_IFACE GLOBAL INTERFACE_REMOVE '%s'", cmd);
wpa_s = wpa_supplicant_get_iface(global, cmd);
if (wpa_s == NULL)
return -1;
return wpa_supplicant_remove_iface(global, wpa_s);
}
static void wpa_free_iface_info(struct wpa_interface_info *iface)
{
struct wpa_interface_info *prev;
while (iface) {
prev = iface;
iface = iface->next;
os_free(prev->ifname);
os_free(prev->desc);
os_free(prev);
}
}
static int wpa_supplicant_global_iface_list(struct wpa_global *global,
char *buf, int len)
{
int i, res;
struct wpa_interface_info *iface = NULL, *last = NULL, *tmp;
char *pos, *end;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
for (i = 0; wpa_drivers[i]; i++) {
struct wpa_driver_ops *drv = wpa_drivers[i];
2009-03-01 22:10:07 +00:00
if (drv->get_interfaces == NULL)
continue;
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
tmp = drv->get_interfaces(global->drv_priv[i]);
2009-03-01 22:10:07 +00:00
if (tmp == NULL)
continue;
if (last == NULL)
iface = last = tmp;
else
last->next = tmp;
while (last->next)
last = last->next;
}
pos = buf;
end = buf + len;
for (tmp = iface; tmp; tmp = tmp->next) {
res = os_snprintf(pos, end - pos, "%s\t%s\t%s\n",
tmp->drv_name, tmp->ifname,
tmp->desc ? tmp->desc : "");
if (res < 0 || res >= end - pos) {
*pos = '\0';
break;
}
pos += res;
}
wpa_free_iface_info(iface);
return pos - buf;
}
static int wpa_supplicant_global_iface_interfaces(struct wpa_global *global,
char *buf, int len)
{
int res;
char *pos, *end;
struct wpa_supplicant *wpa_s;
wpa_s = global->ifaces;
pos = buf;
end = buf + len;
while (wpa_s) {
res = os_snprintf(pos, end - pos, "%s\n", wpa_s->ifname);
if (res < 0 || res >= end - pos) {
*pos = '\0';
break;
}
pos += res;
wpa_s = wpa_s->next;
}
return pos - buf;
}
char * wpa_supplicant_global_ctrl_iface_process(struct wpa_global *global,
char *buf, size_t *resp_len)
{
char *reply;
const int reply_size = 2048;
int reply_len;
wpa_hexdump_ascii(MSG_DEBUG, "RX global ctrl_iface",
(const u8 *) buf, os_strlen(buf));
reply = os_malloc(reply_size);
if (reply == NULL) {
*resp_len = 1;
return NULL;
}
os_memcpy(reply, "OK\n", 3);
reply_len = 3;
if (os_strcmp(buf, "PING") == 0) {
os_memcpy(reply, "PONG\n", 5);
reply_len = 5;
} else if (os_strncmp(buf, "INTERFACE_ADD ", 14) == 0) {
if (wpa_supplicant_global_iface_add(global, buf + 14))
reply_len = -1;
} else if (os_strncmp(buf, "INTERFACE_REMOVE ", 17) == 0) {
if (wpa_supplicant_global_iface_remove(global, buf + 17))
reply_len = -1;
} else if (os_strcmp(buf, "INTERFACE_LIST") == 0) {
reply_len = wpa_supplicant_global_iface_list(
global, reply, reply_size);
} else if (os_strcmp(buf, "INTERFACES") == 0) {
reply_len = wpa_supplicant_global_iface_interfaces(
global, reply, reply_size);
} else if (os_strcmp(buf, "TERMINATE") == 0) {
Import wpa_supplicant / hostapd 0.7.3. Changes: 2010-09-07 - v0.7.3 * fixed fallback from failed PMKSA caching into full EAP authentication [Bug 355] * fixed issue with early D-Bus signals during initialization * fixed X.509 name handling in internal TLS * fixed WPS ER to use corrent Enrollee MAC Address in Credential * fixed scanning routines ot improve AP selection for WPS * added WPS workaround for open networks * fixed WPS Diffie-Hellman derivation to use correct public key length * fixed wpa_supplicant AP mode operations to ignore Supplicant and scan result events * improved SME operations with nl80211 * fixed WPS ER event_id handling in some cases * fixed some issues with bgscan simple to avoid unnecessary scans * fixed issue with l2_packet_ndis overlapped writes corrupting stack [Bug 328] * updated WinPcap to the latest stable version 4.1.2 in Windows installer 2010-04-18 - v0.7.2 * nl80211: fixed number of issues with roaming * avoid unnecessary roaming if multiple APs with similar signal strength are present in scan results * add TLS client events and server probing to ease design of automatic detection of EAP parameters * add option for server certificate matching (SHA256 hash of the certificate) instead of trusted CA certificate configuration * bsd: Cleaned up driver wrapper and added various low-level configuration options * wpa_gui-qt4: do not show too frequent WPS AP available events as tray messages * TNC: fixed issues with fragmentation * EAP-TNC: add Flags field into fragment acknowledgement (needed to interoperate with other implementations; may potentially breaks compatibility with older wpa_supplicant/hostapd versions) * wpa_cli: added option for using a separate process to receive event messages to reduce latency in showing these (CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this) * maximum BSS table size can now be configured (bss_max_count) * BSSes to be included in the BSS table can be filtered based on configured SSIDs to save memory (filter_ssids) * fix number of issues with IEEE 802.11r/FT; this version is not backwards compatible with old versions * nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air and over-the-DS) * add freq_list network configuration parameter to allow the AP selection to filter out entries based on the operating channel * add signal strength change events for bgscan; this allows more dynamic changes to background scanning interval based on changes in the signal strength with the current AP; this improves roaming within ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network configuration block to request background scans less frequently when signal strength remains good and to automatically trigger background scans whenever signal strength drops noticeably (this is currently only available with nl80211) * add BSSID and reason code (if available) to disconnect event messages * wpa_gui-qt4: more complete support for translating the GUI with linguist and add German translation * fix DH padding with internal crypto code (mainly, for WPS) * do not trigger initial scan automatically anymore if there are no enabled networks 2010-01-16 - v0.7.1 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API is not fully backwards compatible, so out-of-tree driver wrappers will need modifications * cleaned up various module interfaces * merge hostapd and wpa_supplicant developers' documentation into a single document * nl80211: use explicit deauthentication to clear cfg80211 state to avoid issues when roaming between APs * dbus: major design changes in the new D-Bus API (fi.w1.wpa_supplicant1) * nl80211: added support for IBSS networks * added internal debugging mechanism with backtrace support and memory allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) * added WPS ER unsubscription command to more cleanly unregister from receiving UPnP events when ER is terminated * cleaned up AP mode operations to avoid need for virtual driver_ops wrapper * added BSS table to maintain more complete scan result information over multiple scans (that may include only partial results) * wpa_gui-qt4: update Peers dialog information more dynamically while the dialog is kept open * fixed PKCS#12 use with OpenSSL 1.0.0 * driver_wext: Added cfg80211-specific optimization to avoid some unnecessary scans and to speed up association 2009-11-21 - v0.7.0 * increased wpa_cli ping interval to 5 seconds and made this configurable with a new command line options (-G<seconds>) * fixed scan buffer processing with WEXT to handle up to 65535 byte result buffer (previously, limited to 32768 bytes) * allow multiple driver wrappers to be specified on command line (e.g., -Dnl80211,wext); the first one that is able to initialize the interface will be used * added support for multiple SSIDs per scan request to optimize scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden SSIDs); this requires driver support and can currently be used only with nl80211 * added support for WPS USBA out-of-band mechanism with USB Flash Drives (UFD) (CONFIG_WPS_UFD=y) * driver_ndis: add PAE group address to the multicast address list to fix wired IEEE 802.1X authentication * fixed IEEE 802.11r key derivation function to match with the standard (note: this breaks interoperability with previous version) [Bug 303] * added better support for drivers that allow separate authentication and association commands (e.g., mac80211-based Linux drivers with nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol to be used (IEEE 802.11r) * fixed SHA-256 based key derivation function to match with the standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) (note: this breaks interoperability with previous version) [Bug 307] * use shared driver wrapper files with hostapd * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network block; this can be used for open and WPA2-Personal networks (optionally, with WPS); this links in parts of hostapd functionality into wpa_supplicant * wpa_gui-qt4: added new Peers dialog to show information about peers (other devices, including APs and stations, etc. in the neighborhood) * added support for WPS External Registrar functionality (configure APs and enroll new devices); can be used with wpa_gui-qt4 Peers dialog and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin, wps_er_pbc, wps_er_learn (this can also be used with a new 'none' driver wrapper if no wireless device or IEEE 802.1X on wired is needed) * driver_nl80211: multiple updates to provide support for new Linux nl80211/mac80211 functionality * updated management frame protection to use IEEE Std 802.11w-2009 * fixed number of small WPS issues and added workarounds to interoperate with common deployed broken implementations * added support for NFC out-of-band mechanism with WPS * driver_ndis: fixed wired IEEE 802.1X authentication with PAE group address frames * added preliminary support for IEEE 802.11r RIC processing * added support for specifying subset of enabled frequencies to scan (scan_freq option in the network configuration block); this can speed up scanning process considerably if it is known that only a small subset of channels is actually used in the network (this is currently supported only with -Dnl80211) * added a workaround for race condition between receiving the association event and the following EAPOL-Key * added background scan and roaming infrastructure to allow network-specific optimizations to be used to improve roaming within an ESS (same SSID) * added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
wpa_supplicant_terminate_proc(global);
} else if (os_strcmp(buf, "SUSPEND") == 0) {
wpas_notify_suspend(global);
} else if (os_strcmp(buf, "RESUME") == 0) {
wpas_notify_resume(global);
2009-03-01 22:10:07 +00:00
} else {
os_memcpy(reply, "UNKNOWN COMMAND\n", 16);
reply_len = 16;
}
if (reply_len < 0) {
os_memcpy(reply, "FAIL\n", 5);
reply_len = 5;
}
*resp_len = reply_len;
return reply;
}