2005-01-06 01:43:34 +00:00
|
|
|
/*-
|
2000-01-04 00:00:08 +00:00
|
|
|
* Machine and OS Independent Target Mode Code for the Qlogic SCSI/FC adapters.
|
|
|
|
|
*
|
2006-01-23 06:23:37 +00:00
|
|
|
* Copyright (c) 1997-2006 by Matthew Jacob
|
2000-01-04 00:00:08 +00:00
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice immediately at the beginning of the file, without modification,
|
|
|
|
|
* this list of conditions, and the following disclaimer.
|
2000-09-21 20:16:04 +00:00
|
|
|
* 2. The name of the author may not be used to endorse or promote products
|
2000-01-04 00:00:08 +00:00
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
|
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
2002-02-04 21:04:25 +00:00
|
|
|
/*
|
|
|
|
|
* Bug fixes gratefully acknowledged from:
|
|
|
|
|
* Oded Kedem <oded@kashya.com>
|
|
|
|
|
*/
|
2000-01-04 00:00:08 +00:00
|
|
|
/*
|
|
|
|
|
* Include header file appropriate for platform we're building on.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifdef __NetBSD__
|
|
|
|
|
#include <dev/ic/isp_netbsd.h>
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef __FreeBSD__
|
2006-01-23 06:23:37 +00:00
|
|
|
#include <sys/cdefs.h>
|
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
2000-01-04 00:00:08 +00:00
|
|
|
#include <dev/isp/isp_freebsd.h>
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef __OpenBSD__
|
|
|
|
|
#include <dev/ic/isp_openbsd.h>
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef __linux__
|
|
|
|
|
#include "isp_linux.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef ISP_TARGET_MODE
|
2001-04-04 21:49:51 +00:00
|
|
|
static const char atiocope[] =
|
2001-09-04 21:48:02 +00:00
|
|
|
"ATIO returned for lun %d because it was in the middle of Bus Device Reset "
|
|
|
|
|
"on bus %d";
|
2001-04-04 21:49:51 +00:00
|
|
|
static const char atior[] =
|
2001-09-04 21:48:02 +00:00
|
|
|
"ATIO returned on for lun %d on from IID %d because a Bus Reset occurred "
|
|
|
|
|
"on bus %d";
|
2000-01-04 00:00:08 +00:00
|
|
|
|
2006-01-23 06:23:37 +00:00
|
|
|
static void isp_got_msg(struct ispsoftc *, in_entry_t *);
|
|
|
|
|
static void isp_got_msg_fc(struct ispsoftc *, in_fcentry_t *);
|
2000-01-04 00:00:08 +00:00
|
|
|
static void isp_handle_atio(struct ispsoftc *, at_entry_t *);
|
|
|
|
|
static void isp_handle_atio2(struct ispsoftc *, at2_entry_t *);
|
|
|
|
|
static void isp_handle_ctio(struct ispsoftc *, ct_entry_t *);
|
|
|
|
|
static void isp_handle_ctio2(struct ispsoftc *, ct2_entry_t *);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The Qlogic driver gets an interrupt to look at response queue entries.
|
|
|
|
|
* Some of these are status completions for initiatior mode commands, but
|
|
|
|
|
* if target mode is enabled, we get a whole wad of response queue entries
|
|
|
|
|
* to be handled here.
|
|
|
|
|
*
|
|
|
|
|
* Basically the split into 3 main groups: Lun Enable/Modification responses,
|
|
|
|
|
* SCSI Command processing, and Immediate Notification events.
|
|
|
|
|
*
|
|
|
|
|
* You start by writing a request queue entry to enable target mode (and
|
|
|
|
|
* establish some resource limitations which you can modify later).
|
|
|
|
|
* The f/w responds with a LUN ENABLE or LUN MODIFY response with
|
|
|
|
|
* the status of this action. If the enable was successful, you can expect...
|
|
|
|
|
*
|
|
|
|
|
* Response queue entries with SCSI commands encapsulate show up in an ATIO
|
|
|
|
|
* (Accept Target IO) type- sometimes with enough info to stop the command at
|
|
|
|
|
* this level. Ultimately the driver has to feed back to the f/w's request
|
|
|
|
|
* queue a sequence of CTIOs (continue target I/O) that describe data to
|
|
|
|
|
* be moved and/or status to be sent) and finally finishing with sending
|
|
|
|
|
* to the f/w's response queue an ATIO which then completes the handshake
|
|
|
|
|
* with the f/w for that command. There's a lot of variations on this theme,
|
|
|
|
|
* including flags you can set in the CTIO for the Qlogic 2X00 fibre channel
|
|
|
|
|
* cards that 'auto-replenish' the f/w's ATIO count, but this is the basic
|
|
|
|
|
* gist of it.
|
|
|
|
|
*
|
|
|
|
|
* The third group that can show up in the response queue are Immediate
|
|
|
|
|
* Notification events. These include things like notifications of SCSI bus
|
|
|
|
|
* resets, or Bus Device Reset messages or other messages received. This
|
2001-02-06 09:25:10 +00:00
|
|
|
* a classic oddbins area. It can get a little weird because you then turn
|
2000-01-04 00:00:08 +00:00
|
|
|
* around and acknowledge the Immediate Notify by writing an entry onto the
|
|
|
|
|
* request queue and then the f/w turns around and gives you an acknowledgement
|
|
|
|
|
* to *your* acknowledgement on the response queue (the idea being to let
|
|
|
|
|
* the f/w tell you when the event is *really* over I guess).
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* A new response queue entry has arrived. The interrupt service code
|
|
|
|
|
* has already swizzled it into the platform dependent from canonical form.
|
|
|
|
|
*
|
|
|
|
|
* Because of the way this driver is designed, unfortunately most of the
|
|
|
|
|
* actual synchronization work has to be done in the platform specific
|
|
|
|
|
* code- we have no synchroniation primitives in the common code.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
int
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_target_notify(struct ispsoftc *isp, void *vptr, u_int16_t *optrp)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
|
|
|
|
u_int16_t status, seqid;
|
|
|
|
|
union {
|
|
|
|
|
at_entry_t *atiop;
|
|
|
|
|
at2_entry_t *at2iop;
|
2006-01-23 06:23:37 +00:00
|
|
|
at2e_entry_t *at2eiop;
|
2000-01-04 00:00:08 +00:00
|
|
|
ct_entry_t *ctiop;
|
|
|
|
|
ct2_entry_t *ct2iop;
|
2006-01-23 06:23:37 +00:00
|
|
|
ct2e_entry_t *ct2eiop;
|
2000-01-04 00:00:08 +00:00
|
|
|
lun_entry_t *lunenp;
|
|
|
|
|
in_entry_t *inotp;
|
|
|
|
|
in_fcentry_t *inot_fcp;
|
2006-01-23 06:23:37 +00:00
|
|
|
in_fcentry_e_t *inote_fcp;
|
2000-01-04 00:00:08 +00:00
|
|
|
na_entry_t *nackp;
|
|
|
|
|
na_fcentry_t *nack_fcp;
|
2006-01-23 06:23:37 +00:00
|
|
|
na_fcentry_e_t *nacke_fcp;
|
2000-01-04 00:00:08 +00:00
|
|
|
isphdr_t *hp;
|
|
|
|
|
void * *vp;
|
|
|
|
|
#define atiop unp.atiop
|
|
|
|
|
#define at2iop unp.at2iop
|
2006-01-23 06:23:37 +00:00
|
|
|
#define at2eiop unp.at2eiop
|
2000-01-04 00:00:08 +00:00
|
|
|
#define ctiop unp.ctiop
|
|
|
|
|
#define ct2iop unp.ct2iop
|
2006-01-23 06:23:37 +00:00
|
|
|
#define ct2eiop unp.ct2eiop
|
2000-01-04 00:00:08 +00:00
|
|
|
#define lunenp unp.lunenp
|
|
|
|
|
#define inotp unp.inotp
|
|
|
|
|
#define inot_fcp unp.inot_fcp
|
2006-01-23 06:23:37 +00:00
|
|
|
#define inote_fcp unp.inote_fcp
|
2000-01-04 00:00:08 +00:00
|
|
|
#define nackp unp.nackp
|
|
|
|
|
#define nack_fcp unp.nack_fcp
|
2006-01-23 06:23:37 +00:00
|
|
|
#define nacke_fcp unp.nacke_fcp
|
2000-01-04 00:00:08 +00:00
|
|
|
#define hdrp unp.hp
|
|
|
|
|
} unp;
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
u_int8_t local[QENTRY_LEN];
|
2002-06-16 04:56:07 +00:00
|
|
|
int bus, type, rval = 1;
|
2000-01-04 00:00:08 +00:00
|
|
|
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
type = isp_get_response_type(isp, (isphdr_t *)vptr);
|
2000-01-04 00:00:08 +00:00
|
|
|
unp.vp = vptr;
|
|
|
|
|
|
|
|
|
|
ISP_TDQE(isp, "isp_target_notify", (int) *optrp, vptr);
|
|
|
|
|
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
switch(type) {
|
2000-01-04 00:00:08 +00:00
|
|
|
case RQSTYPE_ATIO:
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_get_atio(isp, atiop, (at_entry_t *) local);
|
|
|
|
|
isp_handle_atio(isp, (at_entry_t *) local);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case RQSTYPE_CTIO:
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_get_ctio(isp, ctiop, (ct_entry_t *) local);
|
|
|
|
|
isp_handle_ctio(isp, (ct_entry_t *) local);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case RQSTYPE_ATIO2:
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp))
|
|
|
|
|
isp_get_atio2e(isp, at2eiop, (at2e_entry_t *) local);
|
|
|
|
|
else
|
|
|
|
|
isp_get_atio2(isp, at2iop, (at2_entry_t *) local);
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_handle_atio2(isp, (at2_entry_t *) local);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
2004-01-29 02:40:43 +00:00
|
|
|
case RQSTYPE_CTIO3:
|
2000-01-04 00:00:08 +00:00
|
|
|
case RQSTYPE_CTIO2:
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp))
|
|
|
|
|
isp_get_ctio2e(isp, ct2eiop, (ct2e_entry_t *) local);
|
|
|
|
|
else
|
|
|
|
|
isp_get_ctio2(isp, ct2iop, (ct2_entry_t *) local);
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_handle_ctio2(isp, (ct2_entry_t *) local);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case RQSTYPE_ENABLE_LUN:
|
|
|
|
|
case RQSTYPE_MODIFY_LUN:
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_get_enable_lun(isp, lunenp, (lun_entry_t *) local);
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, local);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case RQSTYPE_NOTIFY:
|
|
|
|
|
/*
|
|
|
|
|
* Either the ISP received a SCSI message it can't
|
|
|
|
|
* handle, or it's returning an Immed. Notify entry
|
|
|
|
|
* we sent. We can send Immed. Notify entries to
|
|
|
|
|
* increment the firmware's resource count for them
|
|
|
|
|
* (we set this initially in the Enable Lun entry).
|
|
|
|
|
*/
|
2000-02-15 00:53:49 +00:00
|
|
|
bus = 0;
|
2000-01-04 00:00:08 +00:00
|
|
|
if (IS_FC(isp)) {
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp))
|
|
|
|
|
isp_get_notify_fc_e(isp, inote_fcp, (in_fcentry_e_t *)local);
|
|
|
|
|
isp_get_notify_fc(isp, inot_fcp, (in_fcentry_t *)local);
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
inot_fcp = (in_fcentry_t *) local;
|
2000-01-04 00:00:08 +00:00
|
|
|
status = inot_fcp->in_status;
|
|
|
|
|
seqid = inot_fcp->in_seqid;
|
|
|
|
|
} else {
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_get_notify(isp, inotp, (in_entry_t *)local);
|
|
|
|
|
inotp = (in_entry_t *) local;
|
2000-01-04 00:00:08 +00:00
|
|
|
status = inotp->in_status & 0xff;
|
|
|
|
|
seqid = inotp->in_seqid;
|
2000-02-15 00:53:49 +00:00
|
|
|
if (IS_DUALBUS(isp)) {
|
2001-09-04 21:48:02 +00:00
|
|
|
bus = GET_BUS_VAL(inotp->in_iid);
|
|
|
|
|
SET_BUS_VAL(inotp->in_iid, 0);
|
2000-02-15 00:53:49 +00:00
|
|
|
}
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
2001-09-04 21:48:02 +00:00
|
|
|
isp_prt(isp, ISP_LOGTDEBUG0,
|
|
|
|
|
"Immediate Notify On Bus %d, status=0x%x seqid=0x%x",
|
|
|
|
|
bus, status, seqid);
|
|
|
|
|
|
2000-01-04 00:00:08 +00:00
|
|
|
switch (status) {
|
|
|
|
|
case IN_MSG_RECEIVED:
|
|
|
|
|
case IN_IDE_RECEIVED:
|
|
|
|
|
if (IS_FC(isp)) {
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_got_msg_fc(isp, (in_fcentry_t *)local);
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_got_msg(isp, (in_entry_t *)local);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case IN_RSRC_UNAVAIL:
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGWARN, "Firmware out of ATIOs");
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_notify_ack(isp, local);
|
|
|
|
|
break;
|
|
|
|
|
case IN_RESET:
|
|
|
|
|
isp_target_async(isp, 0, ASYNC_BUS_RESET);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case IN_PORT_LOGOUT:
|
2002-06-16 04:56:07 +00:00
|
|
|
case IN_ABORT_TASK:
|
2000-01-04 00:00:08 +00:00
|
|
|
case IN_PORT_CHANGED:
|
|
|
|
|
case IN_GLOBAL_LOGO:
|
2002-06-16 04:56:07 +00:00
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, &local);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
default:
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"bad status (0x%x) in isp_target_notify", status);
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_notify_ack(isp, local);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case RQSTYPE_NOTIFY_ACK:
|
|
|
|
|
/*
|
|
|
|
|
* The ISP is acknowledging our acknowledgement of an
|
|
|
|
|
* Immediate Notify entry for some asynchronous event.
|
|
|
|
|
*/
|
|
|
|
|
if (IS_FC(isp)) {
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp))
|
|
|
|
|
isp_get_notify_ack_fc_e(isp, nacke_fcp,
|
|
|
|
|
(na_fcentry_e_t *)local);
|
|
|
|
|
else
|
|
|
|
|
isp_get_notify_ack_fc(isp, nack_fcp,
|
|
|
|
|
(na_fcentry_t *)local);
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
nack_fcp = (na_fcentry_t *)local;
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
|
|
|
"Notify Ack status=0x%x seqid 0x%x",
|
|
|
|
|
nack_fcp->na_status, nack_fcp->na_seqid);
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_get_notify_ack(isp, nackp, (na_entry_t *)local);
|
|
|
|
|
nackp = (na_entry_t *)local;
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGTDEBUG1,
|
|
|
|
|
"Notify Ack event 0x%x status=0x%x seqid 0x%x",
|
|
|
|
|
nackp->na_event, nackp->na_status, nackp->na_seqid);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
default:
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
"Unknown entry type 0x%x in isp_target_notify", type);
|
2002-06-16 04:56:07 +00:00
|
|
|
rval = 0;
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
#undef atiop
|
|
|
|
|
#undef at2iop
|
2006-01-23 06:23:37 +00:00
|
|
|
#undef at2eiop
|
2000-01-04 00:00:08 +00:00
|
|
|
#undef ctiop
|
|
|
|
|
#undef ct2iop
|
2006-01-23 06:23:37 +00:00
|
|
|
#undef ct2eiop
|
2000-01-04 00:00:08 +00:00
|
|
|
#undef lunenp
|
|
|
|
|
#undef inotp
|
|
|
|
|
#undef inot_fcp
|
2006-01-23 06:23:37 +00:00
|
|
|
#undef inote_fcp
|
2000-01-04 00:00:08 +00:00
|
|
|
#undef nackp
|
|
|
|
|
#undef nack_fcp
|
2006-01-23 06:23:37 +00:00
|
|
|
#undef nacke_fcp
|
2000-01-04 00:00:08 +00:00
|
|
|
#undef hdrp
|
|
|
|
|
return (rval);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Toggle (on/off) target mode for bus/target/lun
|
|
|
|
|
*
|
|
|
|
|
* The caller has checked for overlap and legality.
|
|
|
|
|
*
|
|
|
|
|
* Note that not all of bus, target or lun can be paid attention to.
|
|
|
|
|
* Note also that this action will not be complete until the f/w writes
|
|
|
|
|
* response entry. The caller is responsible for synchronizing this.
|
|
|
|
|
*/
|
|
|
|
|
int
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_lun_cmd(struct ispsoftc *isp, int cmd, int bus, int tgt, int lun,
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
int cmd_cnt, int inot_cnt, u_int32_t opaque)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
|
|
|
|
lun_entry_t el;
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
u_int16_t nxti, optr;
|
2000-01-04 00:00:08 +00:00
|
|
|
void *outp;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MEMZERO(&el, sizeof (el));
|
2000-02-15 00:53:49 +00:00
|
|
|
if (IS_DUALBUS(isp)) {
|
|
|
|
|
el.le_rsvd = (bus & 0x1) << 7;
|
|
|
|
|
}
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
el.le_cmd_count = cmd_cnt;
|
|
|
|
|
el.le_in_count = inot_cnt;
|
2000-01-04 00:00:08 +00:00
|
|
|
if (cmd == RQSTYPE_ENABLE_LUN) {
|
|
|
|
|
if (IS_SCSI(isp)) {
|
2000-06-18 04:48:28 +00:00
|
|
|
el.le_flags = LUN_TQAE|LUN_DISAD;
|
2000-01-04 00:00:08 +00:00
|
|
|
el.le_cdb6len = 12;
|
|
|
|
|
el.le_cdb7len = 12;
|
|
|
|
|
}
|
|
|
|
|
} else if (cmd == -RQSTYPE_ENABLE_LUN) {
|
|
|
|
|
cmd = RQSTYPE_ENABLE_LUN;
|
|
|
|
|
el.le_cmd_count = 0;
|
|
|
|
|
el.le_in_count = 0;
|
|
|
|
|
} else if (cmd == -RQSTYPE_MODIFY_LUN) {
|
|
|
|
|
cmd = RQSTYPE_MODIFY_LUN;
|
|
|
|
|
el.le_ops = LUN_CCDECR | LUN_INDECR;
|
|
|
|
|
} else {
|
|
|
|
|
el.le_ops = LUN_CCINCR | LUN_ININCR;
|
|
|
|
|
}
|
|
|
|
|
el.le_header.rqs_entry_type = cmd;
|
|
|
|
|
el.le_header.rqs_entry_count = 1;
|
|
|
|
|
el.le_reserved = opaque;
|
|
|
|
|
if (IS_SCSI(isp)) {
|
|
|
|
|
el.le_tgt = tgt;
|
|
|
|
|
el.le_lun = lun;
|
2001-09-04 21:48:02 +00:00
|
|
|
} else if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) {
|
2000-01-04 00:00:08 +00:00
|
|
|
el.le_lun = lun;
|
|
|
|
|
}
|
2001-04-04 21:49:51 +00:00
|
|
|
el.le_timeout = 2;
|
2000-01-04 00:00:08 +00:00
|
|
|
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
|
|
|
|
|
isp_prt(isp, ISP_LOGERR,
|
2000-08-01 06:24:01 +00:00
|
|
|
"Request Queue Overflow in isp_lun_cmd");
|
2000-01-04 00:00:08 +00:00
|
|
|
return (-1);
|
|
|
|
|
}
|
|
|
|
|
ISP_TDQE(isp, "isp_lun_cmd", (int) optr, &el);
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_put_enable_lun(isp, &el, outp);
|
|
|
|
|
ISP_ADD_REQUEST(isp, nxti);
|
2000-01-04 00:00:08 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
int
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_target_put_entry(struct ispsoftc *isp, void *ap)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
|
|
|
|
void *outp;
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
u_int16_t nxti, optr;
|
2000-01-04 00:00:08 +00:00
|
|
|
u_int8_t etype = ((isphdr_t *) ap)->rqs_entry_type;
|
|
|
|
|
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGWARN,
|
|
|
|
|
"Request Queue Overflow in isp_target_put_entry");
|
2000-01-04 00:00:08 +00:00
|
|
|
return (-1);
|
|
|
|
|
}
|
|
|
|
|
switch (etype) {
|
|
|
|
|
case RQSTYPE_ATIO:
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_put_atio(isp, (at_entry_t *) ap, (at_entry_t *) outp);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case RQSTYPE_ATIO2:
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_put_atio2(isp, (at2_entry_t *) ap, (at2_entry_t *) outp);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case RQSTYPE_CTIO:
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_put_ctio(isp, (ct_entry_t *) ap, (ct_entry_t *) outp);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case RQSTYPE_CTIO2:
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_put_ctio2(isp, (ct2_entry_t *) ap, (ct2_entry_t *) outp);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
default:
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"Unknown type 0x%x in isp_put_entry", etype);
|
2000-01-04 00:00:08 +00:00
|
|
|
return (-1);
|
|
|
|
|
}
|
|
|
|
|
|
2003-09-13 01:58:26 +00:00
|
|
|
ISP_TDQE(isp, "isp_target_put_entry", (int) optr, ap);
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
ISP_ADD_REQUEST(isp, nxti);
|
2000-01-04 00:00:08 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_target_put_atio(struct ispsoftc *isp, void *arg)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
|
|
|
|
union {
|
|
|
|
|
at_entry_t _atio;
|
|
|
|
|
at2_entry_t _atio2;
|
2006-01-23 06:23:37 +00:00
|
|
|
at2e_entry_t _atio2e;
|
2000-01-04 00:00:08 +00:00
|
|
|
} atun;
|
|
|
|
|
|
|
|
|
|
MEMZERO(&atun, sizeof atun);
|
|
|
|
|
if (IS_FC(isp)) {
|
2001-04-04 21:49:51 +00:00
|
|
|
at2_entry_t *aep = arg;
|
2000-01-04 00:00:08 +00:00
|
|
|
atun._atio2.at_header.rqs_entry_type = RQSTYPE_ATIO2;
|
|
|
|
|
atun._atio2.at_header.rqs_entry_count = 1;
|
2001-09-03 03:12:10 +00:00
|
|
|
if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
|
2001-04-04 21:49:51 +00:00
|
|
|
atun._atio2.at_scclun = (u_int16_t) aep->at_scclun;
|
2000-06-18 04:48:28 +00:00
|
|
|
} else {
|
2001-09-03 03:12:10 +00:00
|
|
|
atun._atio2.at_lun = (u_int8_t) aep->at_lun;
|
2000-06-18 04:48:28 +00:00
|
|
|
}
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp)) {
|
|
|
|
|
atun._atio2e.at_iid = ((at2e_entry_t *)aep)->at_iid;
|
|
|
|
|
} else {
|
|
|
|
|
atun._atio2.at_iid = aep->at_iid;
|
|
|
|
|
}
|
2003-02-16 14:26:23 +00:00
|
|
|
atun._atio2.at_rxid = aep->at_rxid;
|
2000-01-04 00:00:08 +00:00
|
|
|
atun._atio2.at_status = CT_OK;
|
|
|
|
|
} else {
|
2001-04-04 21:49:51 +00:00
|
|
|
at_entry_t *aep = arg;
|
2000-01-04 00:00:08 +00:00
|
|
|
atun._atio.at_header.rqs_entry_type = RQSTYPE_ATIO;
|
|
|
|
|
atun._atio.at_header.rqs_entry_count = 1;
|
2001-04-04 21:49:51 +00:00
|
|
|
atun._atio.at_handle = aep->at_handle;
|
|
|
|
|
atun._atio.at_iid = aep->at_iid;
|
|
|
|
|
atun._atio.at_tgt = aep->at_tgt;
|
|
|
|
|
atun._atio.at_lun = aep->at_lun;
|
|
|
|
|
atun._atio.at_tag_type = aep->at_tag_type;
|
|
|
|
|
atun._atio.at_tag_val = aep->at_tag_val;
|
|
|
|
|
atun._atio.at_status = (aep->at_flags & AT_TQAE);
|
|
|
|
|
atun._atio.at_status |= CT_OK;
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
return (isp_target_put_entry(isp, &atun));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Command completion- both for handling cases of no resources or
|
|
|
|
|
* no blackhole driver, or other cases where we have to, inline,
|
|
|
|
|
* finish the command sanely, or for normal command completion.
|
|
|
|
|
*
|
|
|
|
|
* The 'completion' code value has the scsi status byte in the low 8 bits.
|
|
|
|
|
* If status is a CHECK CONDITION and bit 8 is nonzero, then bits 12..15 have
|
|
|
|
|
* the sense key and bits 16..23 have the ASCQ and bits 24..31 have the ASC
|
|
|
|
|
* values.
|
|
|
|
|
*
|
|
|
|
|
* NB: the key, asc, ascq, cannot be used for parallel SCSI as it doesn't
|
2001-04-04 21:49:51 +00:00
|
|
|
* NB: inline SCSI sense reporting. As such, we lose this information. XXX.
|
2000-01-04 00:00:08 +00:00
|
|
|
*
|
|
|
|
|
* For both parallel && fibre channel, we use the feature that does
|
|
|
|
|
* an automatic resource autoreplenish so we don't have then later do
|
|
|
|
|
* put of an atio to replenish the f/w's resource count.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
int
|
2001-03-02 06:28:55 +00:00
|
|
|
isp_endcmd(struct ispsoftc *isp, void *arg, u_int32_t code, u_int16_t hdl)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
|
|
|
|
int sts;
|
|
|
|
|
union {
|
|
|
|
|
ct_entry_t _ctio;
|
|
|
|
|
ct2_entry_t _ctio2;
|
2006-01-23 06:23:37 +00:00
|
|
|
ct2e_entry_t _ctio2e;
|
2000-01-04 00:00:08 +00:00
|
|
|
} un;
|
|
|
|
|
|
|
|
|
|
MEMZERO(&un, sizeof un);
|
|
|
|
|
sts = code & 0xff;
|
|
|
|
|
|
|
|
|
|
if (IS_FC(isp)) {
|
|
|
|
|
at2_entry_t *aep = arg;
|
|
|
|
|
ct2_entry_t *cto = &un._ctio2;
|
|
|
|
|
|
|
|
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
|
|
|
|
|
cto->ct_header.rqs_entry_count = 1;
|
2001-09-04 21:48:02 +00:00
|
|
|
if ((FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) == 0) {
|
2000-06-18 04:48:28 +00:00
|
|
|
cto->ct_lun = aep->at_lun;
|
|
|
|
|
}
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp)) {
|
|
|
|
|
un._ctio2e.ct_iid = ((at2e_entry_t *)aep)->at_iid;
|
|
|
|
|
} else {
|
|
|
|
|
cto->ct_iid = aep->at_iid;
|
|
|
|
|
}
|
2000-01-04 00:00:08 +00:00
|
|
|
cto->ct_rxid = aep->at_rxid;
|
2004-01-29 06:36:30 +00:00
|
|
|
cto->rsp.m1.ct_scsi_status = sts;
|
2000-01-04 00:00:08 +00:00
|
|
|
cto->ct_flags = CT2_SENDSTATUS | CT2_NO_DATA | CT2_FLAG_MODE1;
|
|
|
|
|
if (hdl == 0) {
|
|
|
|
|
cto->ct_flags |= CT2_CCINCR;
|
|
|
|
|
}
|
|
|
|
|
if (aep->at_datalen) {
|
|
|
|
|
cto->ct_resid = aep->at_datalen;
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
cto->rsp.m1.ct_scsi_status |= CT2_DATA_UNDER;
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
2004-01-29 06:36:30 +00:00
|
|
|
if (sts == SCSI_CHECK && (code & ECMD_SVALID)) {
|
2000-01-04 00:00:08 +00:00
|
|
|
cto->rsp.m1.ct_resp[0] = 0xf0;
|
|
|
|
|
cto->rsp.m1.ct_resp[2] = (code >> 12) & 0xf;
|
|
|
|
|
cto->rsp.m1.ct_resp[7] = 8;
|
|
|
|
|
cto->rsp.m1.ct_resp[12] = (code >> 24) & 0xff;
|
|
|
|
|
cto->rsp.m1.ct_resp[13] = (code >> 16) & 0xff;
|
|
|
|
|
cto->rsp.m1.ct_senselen = 16;
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
cto->rsp.m1.ct_scsi_status |= CT2_SNSLEN_VALID;
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
2001-03-14 04:14:58 +00:00
|
|
|
cto->ct_syshandle = hdl;
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
|
|
|
|
at_entry_t *aep = arg;
|
|
|
|
|
ct_entry_t *cto = &un._ctio;
|
|
|
|
|
|
|
|
|
|
cto->ct_header.rqs_entry_type = RQSTYPE_CTIO;
|
|
|
|
|
cto->ct_header.rqs_entry_count = 1;
|
2001-03-02 06:28:55 +00:00
|
|
|
cto->ct_fwhandle = aep->at_handle;
|
2000-01-04 00:00:08 +00:00
|
|
|
cto->ct_iid = aep->at_iid;
|
|
|
|
|
cto->ct_tgt = aep->at_tgt;
|
|
|
|
|
cto->ct_lun = aep->at_lun;
|
|
|
|
|
cto->ct_tag_type = aep->at_tag_type;
|
|
|
|
|
cto->ct_tag_val = aep->at_tag_val;
|
2001-04-04 21:49:51 +00:00
|
|
|
if (aep->at_flags & AT_TQAE) {
|
|
|
|
|
cto->ct_flags |= CT_TQAE;
|
|
|
|
|
}
|
2000-01-04 00:00:08 +00:00
|
|
|
cto->ct_flags = CT_SENDSTATUS | CT_NO_DATA;
|
|
|
|
|
if (hdl == 0) {
|
|
|
|
|
cto->ct_flags |= CT_CCINCR;
|
|
|
|
|
}
|
|
|
|
|
cto->ct_scsi_status = sts;
|
2001-03-14 04:14:58 +00:00
|
|
|
cto->ct_syshandle = hdl;
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
return (isp_target_put_entry(isp, &un));
|
|
|
|
|
}
|
|
|
|
|
|
2002-06-16 04:56:07 +00:00
|
|
|
int
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_target_async(struct ispsoftc *isp, int bus, int event)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
2006-01-23 06:23:37 +00:00
|
|
|
tmd_notify_t notify;
|
|
|
|
|
|
|
|
|
|
MEMZERO(¬ify, sizeof (tmd_notify_t));
|
|
|
|
|
notify.nt_hba = isp;
|
|
|
|
|
/* nt_str set in outer layers */
|
|
|
|
|
notify.nt_iid = INI_ANY;
|
|
|
|
|
/* nt_tgt set in outer layers */
|
|
|
|
|
notify.nt_lun = LUN_ANY;
|
|
|
|
|
notify.nt_tagval = TAG_ANY;
|
|
|
|
|
|
|
|
|
|
if (IS_SCSI(isp)) {
|
|
|
|
|
TAG_INSERT_BUS(notify.nt_tagval, bus);
|
|
|
|
|
}
|
2000-01-04 00:00:08 +00:00
|
|
|
|
|
|
|
|
switch (event) {
|
|
|
|
|
case ASYNC_LOOP_UP:
|
2006-01-23 06:23:37 +00:00
|
|
|
case ASYNC_PTPMODE:
|
|
|
|
|
notify.nt_ncode = NT_LINK_UP;
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
|
|
|
break;
|
2000-01-04 00:00:08 +00:00
|
|
|
case ASYNC_LOOP_DOWN:
|
2006-01-23 06:23:37 +00:00
|
|
|
notify.nt_ncode = NT_LINK_DOWN;
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
|
|
|
break;
|
|
|
|
|
case ASYNC_LIP_F8:
|
|
|
|
|
case ASYNC_LIP_OCCURRED:
|
2000-01-04 00:00:08 +00:00
|
|
|
case ASYNC_LOOP_RESET:
|
2006-01-23 06:23:37 +00:00
|
|
|
notify.nt_ncode = NT_LIP_RESET;
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
|
|
|
break;
|
2000-01-04 00:00:08 +00:00
|
|
|
case ASYNC_BUS_RESET:
|
2006-01-23 06:23:37 +00:00
|
|
|
case ASYNC_TIMEOUT_RESET: /* XXX: where does this come from ? */
|
|
|
|
|
notify.nt_ncode = NT_BUS_RESET;
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case ASYNC_DEVICE_RESET:
|
2006-01-23 06:23:37 +00:00
|
|
|
notify.nt_ncode = NT_TARGET_RESET;
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, ¬ify);
|
|
|
|
|
break;
|
|
|
|
|
case ASYNC_CTIO_DONE:
|
|
|
|
|
{
|
|
|
|
|
uint8_t storage[QENTRY_LEN];
|
|
|
|
|
memset(storage, 0, QENTRY_LEN);
|
2000-01-04 00:00:08 +00:00
|
|
|
if (IS_FC(isp)) {
|
2006-01-23 06:23:37 +00:00
|
|
|
ct2_entry_t *ct = (ct2_entry_t *) storage;
|
|
|
|
|
ct->ct_header.rqs_entry_type = RQSTYPE_CTIO2;
|
|
|
|
|
ct->ct_status = CT_OK;
|
|
|
|
|
ct->ct_syshandle = bus;
|
|
|
|
|
ct->ct_flags = CT2_SENDSTATUS|CT2_FASTPOST;
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
2006-01-23 06:23:37 +00:00
|
|
|
ct_entry_t *ct = (ct_entry_t *) storage;
|
|
|
|
|
ct->ct_header.rqs_entry_type = RQSTYPE_CTIO;
|
|
|
|
|
ct->ct_status = CT_OK;
|
|
|
|
|
ct->ct_fwhandle = bus;
|
|
|
|
|
ct->ct_flags = CT_SENDSTATUS;
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
2006-01-23 06:23:37 +00:00
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, storage);
|
2003-09-13 01:58:26 +00:00
|
|
|
return (0);
|
2006-01-23 06:23:37 +00:00
|
|
|
}
|
2000-01-04 00:00:08 +00:00
|
|
|
default:
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"isp_target_async: unknown event 0x%x", event);
|
2006-01-23 06:23:37 +00:00
|
|
|
if (isp->isp_state == ISP_RUNSTATE) {
|
|
|
|
|
isp_notify_ack(isp, NULL);
|
|
|
|
|
}
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
}
|
2006-01-23 06:23:37 +00:00
|
|
|
return (0);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Process a received message.
|
|
|
|
|
* The ISP firmware can handle most messages, there are only
|
|
|
|
|
* a few that we need to deal with:
|
|
|
|
|
* - abort: clean up the current command
|
|
|
|
|
* - abort tag and clear queue
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static void
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_got_msg(struct ispsoftc *isp, in_entry_t *inp)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
2006-01-23 06:23:37 +00:00
|
|
|
tmd_notify_t nt;
|
2000-01-04 00:00:08 +00:00
|
|
|
u_int8_t status = inp->in_status & ~QLTM_SVALID;
|
|
|
|
|
|
2006-01-23 06:23:37 +00:00
|
|
|
MEMZERO(&nt, sizeof (nt));
|
|
|
|
|
nt.nt_hba = isp;
|
|
|
|
|
/* nt_str set in outer layers */
|
|
|
|
|
nt.nt_iid = GET_IID_VAL(inp->in_iid);
|
|
|
|
|
nt.nt_tgt = inp->in_tgt;
|
|
|
|
|
nt.nt_lun = inp->in_lun;
|
|
|
|
|
IN_MAKE_TAGID(nt.nt_tagval, 0, inp);
|
|
|
|
|
nt.nt_lreserved = inp;
|
|
|
|
|
|
2000-01-04 00:00:08 +00:00
|
|
|
if (status == IN_IDE_RECEIVED || status == IN_MSG_RECEIVED) {
|
2006-01-23 06:23:37 +00:00
|
|
|
switch (inp->in_msg[0]) {
|
|
|
|
|
case MSG_ABORT:
|
|
|
|
|
nt.nt_ncode = NT_ABORT_TASK_SET;
|
|
|
|
|
break;
|
|
|
|
|
case MSG_BUS_DEV_RESET:
|
|
|
|
|
nt.nt_ncode = NT_TARGET_RESET;
|
|
|
|
|
break;
|
|
|
|
|
case MSG_ABORT_TAG:
|
|
|
|
|
nt.nt_ncode = NT_ABORT_TASK;
|
|
|
|
|
break;
|
|
|
|
|
case MSG_CLEAR_QUEUE:
|
|
|
|
|
nt.nt_ncode = NT_CLEAR_TASK_SET;
|
|
|
|
|
break;
|
|
|
|
|
case MSG_REL_RECOVERY:
|
|
|
|
|
nt.nt_ncode = NT_CLEAR_ACA;
|
|
|
|
|
break;
|
|
|
|
|
case MSG_TERM_IO_PROC:
|
|
|
|
|
nt.nt_ncode = NT_ABORT_TASK;
|
|
|
|
|
break;
|
|
|
|
|
case MSG_LUN_RESET:
|
|
|
|
|
nt.nt_ncode = NT_LUN_RESET;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"unhandled message 0x%x", inp->in_msg[0]);
|
|
|
|
|
isp_notify_ack(isp, inp);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, &nt);
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"unknown immediate notify status 0x%x", inp->in_status);
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_notify_ack(isp, inp);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Synthesize a message from the task management flags in a FCP_CMND_IU.
|
|
|
|
|
*/
|
|
|
|
|
static void
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_got_msg_fc(struct ispsoftc *isp, in_fcentry_t *inp)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
2006-01-23 06:23:37 +00:00
|
|
|
tmd_notify_t nt;
|
|
|
|
|
static const char f1[] = "%s from iid 0x%08x%08x lun %d seq 0x%x";
|
2001-04-04 21:49:51 +00:00
|
|
|
static const char f2[] =
|
2006-01-23 06:23:37 +00:00
|
|
|
"unknown %s 0x%x lun %d iid 0x%08x%08x task flags 0x%x seq 0x%x\n";
|
2000-01-04 00:00:08 +00:00
|
|
|
|
2006-01-23 06:23:37 +00:00
|
|
|
MEMZERO(&nt, sizeof (tmd_notify_t));
|
|
|
|
|
nt.nt_hba = isp;
|
|
|
|
|
/*
|
|
|
|
|
* XXX: LOOK UP TRANSLATION IN CURRENT LPORTDB
|
|
|
|
|
*/
|
|
|
|
|
if (IS_2KLOGIN(isp)) {
|
|
|
|
|
nt.nt_iid = ((in_fcentry_e_t *)inp)->in_iid;
|
|
|
|
|
} else {
|
|
|
|
|
nt.nt_iid = inp->in_iid; /* possibly reset in outer layer */
|
|
|
|
|
}
|
|
|
|
|
/* nt_tgt set in outer layers */
|
2001-09-03 03:12:10 +00:00
|
|
|
if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
|
2006-01-23 06:23:37 +00:00
|
|
|
nt.nt_lun = inp->in_scclun;
|
2001-09-03 03:12:10 +00:00
|
|
|
} else {
|
2006-01-23 06:23:37 +00:00
|
|
|
nt.nt_lun = inp->in_lun;
|
2001-09-03 03:12:10 +00:00
|
|
|
}
|
2006-01-23 06:23:37 +00:00
|
|
|
IN_FC_MAKE_TAGID(nt.nt_tagval, 0, inp);
|
|
|
|
|
nt.nt_lreserved = inp;
|
2001-09-03 03:12:10 +00:00
|
|
|
|
2000-01-04 00:00:08 +00:00
|
|
|
if (inp->in_status != IN_MSG_RECEIVED) {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGINFO, f2, "immediate notify status",
|
2006-01-23 06:23:37 +00:00
|
|
|
inp->in_status, nt.nt_lun, (u_int32_t) (nt.nt_iid >> 32), (u_int32_t) nt.nt_iid,
|
2000-01-04 00:00:08 +00:00
|
|
|
inp->in_task_flags, inp->in_seqid);
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_notify_ack(isp, inp);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (inp->in_task_flags & TASK_FLAGS_ABORT_TASK_SET) {
|
|
|
|
|
isp_prt(isp, ISP_LOGINFO, f1, "ABORT TASK SET",
|
|
|
|
|
(u_int32_t) (nt.nt_iid >> 32), (u_int32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid);
|
|
|
|
|
nt.nt_ncode = NT_ABORT_TASK_SET;
|
|
|
|
|
} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_TASK_SET) {
|
|
|
|
|
isp_prt(isp, ISP_LOGINFO, f1, "CLEAR TASK SET",
|
|
|
|
|
(u_int32_t) (nt.nt_iid >> 32), (u_int32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid);
|
|
|
|
|
nt.nt_ncode = NT_CLEAR_TASK_SET;
|
|
|
|
|
} else if (inp->in_task_flags & TASK_FLAGS_LUN_RESET) {
|
|
|
|
|
isp_prt(isp, ISP_LOGINFO, f1, "LUN RESET",
|
|
|
|
|
(u_int32_t) (nt.nt_iid >> 32), (u_int32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid);
|
|
|
|
|
nt.nt_ncode = NT_LUN_RESET;
|
|
|
|
|
} else if (inp->in_task_flags & TASK_FLAGS_TARGET_RESET) {
|
|
|
|
|
isp_prt(isp, ISP_LOGINFO, f1, "TARGET RESET",
|
|
|
|
|
(u_int32_t) (nt.nt_iid >> 32), (u_int32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid);
|
|
|
|
|
nt.nt_ncode = NT_TARGET_RESET;
|
|
|
|
|
} else if (inp->in_task_flags & TASK_FLAGS_CLEAR_ACA) {
|
|
|
|
|
isp_prt(isp, ISP_LOGINFO, f1, "CLEAR ACA",
|
|
|
|
|
(u_int32_t) (nt.nt_iid >> 32), (u_int32_t) nt.nt_iid, nt.nt_lun, inp->in_seqid);
|
|
|
|
|
nt.nt_ncode = NT_CLEAR_ACA;
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_prt(isp, ISP_LOGWARN, f2, "task flag",
|
|
|
|
|
inp->in_status, nt.nt_lun, (u_int32_t) (nt.nt_iid >> 32), (u_int32_t) nt.nt_iid,
|
|
|
|
|
inp->in_task_flags, inp->in_seqid);
|
|
|
|
|
isp_notify_ack(isp, inp);
|
|
|
|
|
return;
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
2006-01-23 06:23:37 +00:00
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_NOTIFY, &nt);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
|
2006-01-23 06:23:37 +00:00
|
|
|
void
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_notify_ack(struct ispsoftc *isp, void *arg)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
|
|
|
|
char storage[QENTRY_LEN];
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
u_int16_t nxti, optr;
|
2000-01-04 00:00:08 +00:00
|
|
|
void *outp;
|
|
|
|
|
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
if (isp_getrqentry(isp, &nxti, &optr, &outp)) {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGWARN,
|
|
|
|
|
"Request Queue Overflow For isp_notify_ack");
|
2000-01-04 00:00:08 +00:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
2000-01-15 01:49:09 +00:00
|
|
|
MEMZERO(storage, QENTRY_LEN);
|
2000-01-04 00:00:08 +00:00
|
|
|
|
|
|
|
|
if (IS_FC(isp)) {
|
|
|
|
|
na_fcentry_t *na = (na_fcentry_t *) storage;
|
|
|
|
|
if (arg) {
|
|
|
|
|
in_fcentry_t *inp = arg;
|
2000-01-15 01:49:09 +00:00
|
|
|
MEMCPY(storage, arg, sizeof (isphdr_t));
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp)) {
|
|
|
|
|
((na_fcentry_e_t *)na)->na_iid = ((in_fcentry_e_t *)inp)->in_iid;
|
|
|
|
|
} else {
|
|
|
|
|
na->na_iid = inp->in_iid;
|
|
|
|
|
}
|
2001-09-03 03:12:10 +00:00
|
|
|
if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
|
2000-06-18 04:48:28 +00:00
|
|
|
na->na_lun = inp->in_scclun;
|
|
|
|
|
} else {
|
|
|
|
|
na->na_lun = inp->in_lun;
|
|
|
|
|
}
|
2000-01-04 00:00:08 +00:00
|
|
|
na->na_task_flags = inp->in_task_flags;
|
|
|
|
|
na->na_seqid = inp->in_seqid;
|
|
|
|
|
na->na_flags = NAFC_RCOUNT;
|
2002-02-04 21:04:25 +00:00
|
|
|
na->na_status = inp->in_status;
|
2000-01-04 00:00:08 +00:00
|
|
|
if (inp->in_status == IN_RESET) {
|
|
|
|
|
na->na_flags |= NAFC_RST_CLRD;
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
na->na_flags = NAFC_RST_CLRD;
|
|
|
|
|
}
|
2000-04-21 02:05:54 +00:00
|
|
|
na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
|
|
|
|
|
na->na_header.rqs_entry_count = 1;
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp)) {
|
|
|
|
|
isp_put_notify_ack_fc_e(isp, (na_fcentry_e_t *) na, (na_fcentry_e_t *)outp);
|
|
|
|
|
} else {
|
|
|
|
|
isp_put_notify_ack_fc(isp, na, (na_fcentry_t *)outp);
|
|
|
|
|
}
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
|
|
|
|
na_entry_t *na = (na_entry_t *) storage;
|
|
|
|
|
if (arg) {
|
|
|
|
|
in_entry_t *inp = arg;
|
2000-01-15 01:49:09 +00:00
|
|
|
MEMCPY(storage, arg, sizeof (isphdr_t));
|
2000-01-04 00:00:08 +00:00
|
|
|
na->na_iid = inp->in_iid;
|
|
|
|
|
na->na_lun = inp->in_lun;
|
|
|
|
|
na->na_tgt = inp->in_tgt;
|
|
|
|
|
na->na_seqid = inp->in_seqid;
|
|
|
|
|
if (inp->in_status == IN_RESET) {
|
2000-04-21 02:05:54 +00:00
|
|
|
na->na_event = NA_RST_CLRD;
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
} else {
|
2000-04-21 02:05:54 +00:00
|
|
|
na->na_event = NA_RST_CLRD;
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
2000-04-21 02:05:54 +00:00
|
|
|
na->na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK;
|
|
|
|
|
na->na_header.rqs_entry_count = 1;
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
isp_put_notify_ack(isp, na, (na_entry_t *)outp);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
ISP_TDQE(isp, "isp_notify_ack", (int) optr, storage);
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
ISP_ADD_REQUEST(isp, nxti);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_handle_atio(struct ispsoftc *isp, at_entry_t *aep)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
|
|
|
|
int lun;
|
|
|
|
|
lun = aep->at_lun;
|
|
|
|
|
/*
|
|
|
|
|
* The firmware status (except for the QLTM_SVALID bit) indicates
|
|
|
|
|
* why this ATIO was sent to us.
|
|
|
|
|
*
|
|
|
|
|
* If QLTM_SVALID is set, the firware has recommended Sense Data.
|
|
|
|
|
*
|
|
|
|
|
* If the DISCONNECTS DISABLED bit is set in the flags field,
|
|
|
|
|
* we're still connected on the SCSI bus - i.e. the initiator
|
|
|
|
|
* did not set DiscPriv in the identify message. We don't care
|
|
|
|
|
* about this so it's ignored.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
switch(aep->at_status & ~QLTM_SVALID) {
|
|
|
|
|
case AT_PATH_INVALID:
|
|
|
|
|
/*
|
|
|
|
|
* ATIO rejected by the firmware due to disabled lun.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"rejected ATIO for disabled lun %d", lun);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case AT_NOCAP:
|
|
|
|
|
/*
|
|
|
|
|
* Requested Capability not available
|
|
|
|
|
* We sent an ATIO that overflowed the firmware's
|
|
|
|
|
* command resource count.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"rejected ATIO for lun %d because of command count"
|
|
|
|
|
" overflow", lun);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case AT_BDR_MSG:
|
|
|
|
|
/*
|
|
|
|
|
* If we send an ATIO to the firmware to increment
|
|
|
|
|
* its command resource count, and the firmware is
|
|
|
|
|
* recovering from a Bus Device Reset, it returns
|
|
|
|
|
* the ATIO with this status. We set the command
|
Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
MFC after: 2 weeks
2001-12-11 00:18:45 +00:00
|
|
|
* resource count in the Enable Lun entry and do
|
2000-01-04 00:00:08 +00:00
|
|
|
* not increment it. Therefore we should never get
|
|
|
|
|
* this status here.
|
|
|
|
|
*/
|
2001-09-04 21:48:02 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, atiocope, lun,
|
|
|
|
|
GET_BUS_VAL(aep->at_iid));
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case AT_CDB: /* Got a CDB */
|
|
|
|
|
case AT_PHASE_ERROR: /* Bus Phase Sequence Error */
|
|
|
|
|
/*
|
|
|
|
|
* Punt to platform specific layer.
|
|
|
|
|
*/
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case AT_RESET:
|
|
|
|
|
/*
|
2002-12-30 21:18:15 +00:00
|
|
|
* A bus reset came along and blew away this command. Why
|
2000-01-04 00:00:08 +00:00
|
|
|
* they do this in addition the async event code stuff,
|
|
|
|
|
* I dunno.
|
|
|
|
|
*
|
|
|
|
|
* Ignore it because the async event will clear things
|
|
|
|
|
* up for us.
|
|
|
|
|
*/
|
2001-09-04 21:48:02 +00:00
|
|
|
isp_prt(isp, ISP_LOGWARN, atior, lun,
|
|
|
|
|
GET_IID_VAL(aep->at_iid), GET_BUS_VAL(aep->at_iid));
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
default:
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"Unknown ATIO status 0x%x from initiator %d for lun %d",
|
|
|
|
|
aep->at_status, aep->at_iid, lun);
|
2001-04-04 21:49:51 +00:00
|
|
|
(void) isp_target_put_atio(isp, aep);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_handle_atio2(struct ispsoftc *isp, at2_entry_t *aep)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
2006-01-23 06:23:37 +00:00
|
|
|
int lun, iid;
|
2000-06-18 04:48:28 +00:00
|
|
|
|
2001-09-03 03:12:10 +00:00
|
|
|
if (FCPARAM(isp)->isp_fwattr & ISP_FW_ATTR_SCCLUN) {
|
2000-06-18 04:48:28 +00:00
|
|
|
lun = aep->at_scclun;
|
|
|
|
|
} else {
|
|
|
|
|
lun = aep->at_lun;
|
|
|
|
|
}
|
|
|
|
|
|
2006-01-23 06:23:37 +00:00
|
|
|
if (IS_2KLOGIN(isp)) {
|
|
|
|
|
iid = ((at2e_entry_t *)aep)->at_iid;
|
|
|
|
|
} else {
|
|
|
|
|
iid = aep->at_iid;
|
|
|
|
|
}
|
|
|
|
|
|
2000-01-04 00:00:08 +00:00
|
|
|
/*
|
|
|
|
|
* The firmware status (except for the QLTM_SVALID bit) indicates
|
|
|
|
|
* why this ATIO was sent to us.
|
|
|
|
|
*
|
|
|
|
|
* If QLTM_SVALID is set, the firware has recommended Sense Data.
|
|
|
|
|
*
|
|
|
|
|
* If the DISCONNECTS DISABLED bit is set in the flags field,
|
|
|
|
|
* we're still connected on the SCSI bus - i.e. the initiator
|
|
|
|
|
* did not set DiscPriv in the identify message. We don't care
|
|
|
|
|
* about this so it's ignored.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
switch(aep->at_status & ~QLTM_SVALID) {
|
|
|
|
|
case AT_PATH_INVALID:
|
|
|
|
|
/*
|
|
|
|
|
* ATIO rejected by the firmware due to disabled lun.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"rejected ATIO2 for disabled lun %d", lun);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
case AT_NOCAP:
|
|
|
|
|
/*
|
|
|
|
|
* Requested Capability not available
|
|
|
|
|
* We sent an ATIO that overflowed the firmware's
|
|
|
|
|
* command resource count.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"rejected ATIO2 for lun %d- command count overflow", lun);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case AT_BDR_MSG:
|
|
|
|
|
/*
|
|
|
|
|
* If we send an ATIO to the firmware to increment
|
|
|
|
|
* its command resource count, and the firmware is
|
|
|
|
|
* recovering from a Bus Device Reset, it returns
|
|
|
|
|
* the ATIO with this status. We set the command
|
|
|
|
|
* resource count in the Enable Lun entry and no
|
|
|
|
|
* not increment it. Therefore we should never get
|
|
|
|
|
* this status here.
|
|
|
|
|
*/
|
2001-09-04 21:48:02 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, atiocope, lun, 0);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case AT_CDB: /* Got a CDB */
|
|
|
|
|
/*
|
|
|
|
|
* Punt to platform specific layer.
|
|
|
|
|
*/
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, aep);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case AT_RESET:
|
|
|
|
|
/*
|
|
|
|
|
* A bus reset came along an blew away this command. Why
|
|
|
|
|
* they do this in addition the async event code stuff,
|
|
|
|
|
* I dunno.
|
|
|
|
|
*
|
|
|
|
|
* Ignore it because the async event will clear things
|
|
|
|
|
* up for us.
|
|
|
|
|
*/
|
2006-01-23 06:23:37 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, atior, lun, iid, 0);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
default:
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"Unknown ATIO2 status 0x%x from initiator %d for lun %d",
|
2006-01-23 06:23:37 +00:00
|
|
|
aep->at_status, iid, lun);
|
2001-04-04 21:49:51 +00:00
|
|
|
(void) isp_target_put_atio(isp, aep);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_handle_ctio(struct ispsoftc *isp, ct_entry_t *ct)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
2001-03-14 04:14:58 +00:00
|
|
|
void *xs;
|
2000-08-01 06:24:01 +00:00
|
|
|
int pl = ISP_LOGTDEBUG2;
|
2000-01-04 00:00:08 +00:00
|
|
|
char *fmsg = NULL;
|
|
|
|
|
|
2001-03-14 04:14:58 +00:00
|
|
|
if (ct->ct_syshandle) {
|
2004-05-24 07:02:25 +00:00
|
|
|
xs = isp_find_xs_tgt(isp, ct->ct_syshandle);
|
2000-01-04 00:00:08 +00:00
|
|
|
if (xs == NULL)
|
2000-08-01 06:24:01 +00:00
|
|
|
pl = ISP_LOGALL;
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
|
|
|
|
xs = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch(ct->ct_status & ~QLTM_SVALID) {
|
|
|
|
|
case CT_OK:
|
|
|
|
|
/*
|
|
|
|
|
* There are generally 3 possibilities as to why we'd get
|
|
|
|
|
* this condition:
|
|
|
|
|
* We disconnected after receiving a CDB.
|
|
|
|
|
* We sent or received data.
|
|
|
|
|
* We sent status & command complete.
|
|
|
|
|
*/
|
|
|
|
|
|
2000-04-21 02:05:54 +00:00
|
|
|
if (ct->ct_flags & CT_SENDSTATUS) {
|
|
|
|
|
break;
|
|
|
|
|
} else if ((ct->ct_flags & CT_DATAMASK) == CT_NO_DATA) {
|
2000-01-04 00:00:08 +00:00
|
|
|
/*
|
|
|
|
|
* Nothing to do in this case.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl, "CTIO- iid %d disconnected OK",
|
|
|
|
|
ct->ct_iid);
|
2000-01-04 00:00:08 +00:00
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_BDR_MSG:
|
|
|
|
|
/*
|
|
|
|
|
* Bus Device Reset message received or the SCSI Bus has
|
|
|
|
|
* been Reset; the firmware has gone to Bus Free.
|
|
|
|
|
*
|
|
|
|
|
* The firmware generates an async mailbox interupt to
|
|
|
|
|
* notify us of this and returns outstanding CTIOs with this
|
|
|
|
|
* status. These CTIOs are handled in that same way as
|
|
|
|
|
* CT_ABORTED ones, so just fall through here.
|
|
|
|
|
*/
|
|
|
|
|
fmsg = "Bus Device Reset";
|
|
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_RESET:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "Bus Reset";
|
|
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_ABORTED:
|
|
|
|
|
/*
|
|
|
|
|
* When an Abort message is received the firmware goes to
|
|
|
|
|
* Bus Free and returns all outstanding CTIOs with the status
|
|
|
|
|
* set, then sends us an Immediate Notify entry.
|
|
|
|
|
*/
|
|
|
|
|
if (fmsg == NULL)
|
2001-09-04 21:48:02 +00:00
|
|
|
fmsg = "ABORT TAG message sent by Initiator";
|
2000-01-04 00:00:08 +00:00
|
|
|
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGWARN, "CTIO destroyed by %s", fmsg);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_INVAL:
|
|
|
|
|
/*
|
|
|
|
|
* CTIO rejected by the firmware due to disabled lun.
|
|
|
|
|
* "Cannot Happen".
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"Firmware rejected CTIO for disabled lun %d",
|
|
|
|
|
ct->ct_lun);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_NOPATH:
|
|
|
|
|
/*
|
|
|
|
|
* CTIO rejected by the firmware due "no path for the
|
|
|
|
|
* nondisconnecting nexus specified". This means that
|
|
|
|
|
* we tried to access the bus while a non-disconnecting
|
|
|
|
|
* command is in process.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"Firmware rejected CTIO for bad nexus %d/%d/%d",
|
|
|
|
|
ct->ct_iid, ct->ct_tgt, ct->ct_lun);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_RSELTMO:
|
|
|
|
|
fmsg = "Reselection";
|
|
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_TIMEOUT:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "Command";
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
2001-04-04 21:49:51 +00:00
|
|
|
case CT_PANIC:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "Unrecoverable Error";
|
|
|
|
|
/*FALLTHROUGH*/
|
2000-01-04 00:00:08 +00:00
|
|
|
case CT_ERR:
|
2001-04-04 21:49:51 +00:00
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "Completed with Error";
|
2000-01-04 00:00:08 +00:00
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_PHASE_ERROR:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "Phase Sequence Error";
|
|
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_TERMINATED:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "terminated by TERMINATE TRANSFER";
|
|
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_NOACK:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "unacknowledged Immediate Notify pending";
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
default:
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, "Unknown CTIO status 0x%x",
|
2000-01-04 00:00:08 +00:00
|
|
|
ct->ct_status & ~QLTM_SVALID);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (xs == NULL) {
|
|
|
|
|
/*
|
|
|
|
|
* There may be more than one CTIO for a data transfer,
|
|
|
|
|
* or this may be a status CTIO we're not monitoring.
|
|
|
|
|
*
|
|
|
|
|
* The assumption is that they'll all be returned in the
|
|
|
|
|
* order we got them.
|
|
|
|
|
*/
|
2001-03-14 04:14:58 +00:00
|
|
|
if (ct->ct_syshandle == 0) {
|
2000-01-04 00:00:08 +00:00
|
|
|
if ((ct->ct_flags & CT_SENDSTATUS) == 0) {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl,
|
|
|
|
|
"intermediate CTIO completed ok");
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl,
|
|
|
|
|
"unmonitored CTIO completed ok");
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
} else {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl,
|
|
|
|
|
"NO xs for CTIO (handle 0x%x) status 0x%x",
|
2001-03-14 04:14:58 +00:00
|
|
|
ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
} else {
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
/*
|
|
|
|
|
* Final CTIO completed. Release DMA resources and
|
|
|
|
|
* notify platform dependent layers.
|
|
|
|
|
*/
|
|
|
|
|
if ((ct->ct_flags & CT_DATAMASK) != CT_NO_DATA) {
|
2001-03-14 04:14:58 +00:00
|
|
|
ISP_DMAFREE(isp, xs, ct->ct_syshandle);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_prt(isp, pl, "final CTIO complete");
|
2000-01-04 00:00:08 +00:00
|
|
|
/*
|
|
|
|
|
* The platform layer will destroy the handle if appropriate.
|
|
|
|
|
*/
|
2001-04-04 21:49:51 +00:00
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_handle_ctio2(struct ispsoftc *isp, ct2_entry_t *ct)
|
2000-01-04 00:00:08 +00:00
|
|
|
{
|
2000-08-01 06:24:01 +00:00
|
|
|
XS_T *xs;
|
|
|
|
|
int pl = ISP_LOGTDEBUG2;
|
2000-01-04 00:00:08 +00:00
|
|
|
char *fmsg = NULL;
|
|
|
|
|
|
2001-03-14 04:14:58 +00:00
|
|
|
if (ct->ct_syshandle) {
|
2004-05-24 07:02:25 +00:00
|
|
|
xs = isp_find_xs_tgt(isp, ct->ct_syshandle);
|
2000-01-04 00:00:08 +00:00
|
|
|
if (xs == NULL)
|
2000-08-01 06:24:01 +00:00
|
|
|
pl = ISP_LOGALL;
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
|
|
|
|
xs = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch(ct->ct_status & ~QLTM_SVALID) {
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
case CT_BUS_ERROR:
|
|
|
|
|
isp_prt(isp, ISP_LOGERR, "PCI DMA Bus Error");
|
|
|
|
|
/* FALL Through */
|
|
|
|
|
case CT_DATA_OVER:
|
|
|
|
|
case CT_DATA_UNDER:
|
2000-01-04 00:00:08 +00:00
|
|
|
case CT_OK:
|
|
|
|
|
/*
|
|
|
|
|
* There are generally 2 possibilities as to why we'd get
|
|
|
|
|
* this condition:
|
|
|
|
|
* We sent or received data.
|
|
|
|
|
* We sent status & command complete.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_BDR_MSG:
|
|
|
|
|
/*
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
* Target Reset function received.
|
2000-01-04 00:00:08 +00:00
|
|
|
*
|
|
|
|
|
* The firmware generates an async mailbox interupt to
|
|
|
|
|
* notify us of this and returns outstanding CTIOs with this
|
|
|
|
|
* status. These CTIOs are handled in that same way as
|
|
|
|
|
* CT_ABORTED ones, so just fall through here.
|
|
|
|
|
*/
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
fmsg = "TARGET RESET Task Management Function Received";
|
2000-01-04 00:00:08 +00:00
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_RESET:
|
|
|
|
|
if (fmsg == NULL)
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
fmsg = "LIP Reset";
|
2000-01-04 00:00:08 +00:00
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_ABORTED:
|
|
|
|
|
/*
|
|
|
|
|
* When an Abort message is received the firmware goes to
|
|
|
|
|
* Bus Free and returns all outstanding CTIOs with the status
|
|
|
|
|
* set, then sends us an Immediate Notify entry.
|
|
|
|
|
*/
|
|
|
|
|
if (fmsg == NULL)
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
fmsg = "ABORT Task Management Function Received";
|
2000-01-04 00:00:08 +00:00
|
|
|
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, "CTIO2 destroyed by %s", fmsg);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_INVAL:
|
|
|
|
|
/*
|
2000-01-15 01:49:09 +00:00
|
|
|
* CTIO rejected by the firmware - invalid data direction.
|
2000-01-04 00:00:08 +00:00
|
|
|
*/
|
2003-09-13 01:58:26 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, "CTIO2 had wrong data direction");
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_RSELTMO:
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
fmsg = "failure to reconnect to initiator";
|
2000-01-04 00:00:08 +00:00
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_TIMEOUT:
|
|
|
|
|
if (fmsg == NULL)
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
fmsg = "command";
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, "Firmware timed out on %s", fmsg);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_ERR:
|
|
|
|
|
fmsg = "Completed with Error";
|
|
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_LOGOUT:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "Port Logout";
|
|
|
|
|
/*FALLTHROUGH*/
|
|
|
|
|
case CT_PORTNOTAVAIL:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "Port not available";
|
2003-05-31 19:49:49 +00:00
|
|
|
/*FALLTHROUGH*/
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
case CT_PORTCHANGED:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "Port Changed";
|
2003-05-31 19:49:49 +00:00
|
|
|
/*FALLTHROUGH*/
|
2000-01-04 00:00:08 +00:00
|
|
|
case CT_NOACK:
|
|
|
|
|
if (fmsg == NULL)
|
|
|
|
|
fmsg = "unacknowledged Immediate Notify pending";
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, "CTIO returned by f/w- %s", fmsg);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case CT_INVRXID:
|
|
|
|
|
/*
|
|
|
|
|
* CTIO rejected by the firmware because an invalid RX_ID.
|
|
|
|
|
* Just print a message.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR,
|
|
|
|
|
"CTIO2 completed with Invalid RX_ID 0x%x", ct->ct_rxid);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
2001-04-04 21:49:51 +00:00
|
|
|
isp_prt(isp, ISP_LOGERR, "Unknown CTIO2 status 0x%x",
|
2000-08-01 06:24:01 +00:00
|
|
|
ct->ct_status & ~QLTM_SVALID);
|
2000-01-04 00:00:08 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (xs == NULL) {
|
|
|
|
|
/*
|
|
|
|
|
* There may be more than one CTIO for a data transfer,
|
|
|
|
|
* or this may be a status CTIO we're not monitoring.
|
|
|
|
|
*
|
|
|
|
|
* The assumption is that they'll all be returned in the
|
|
|
|
|
* order we got them.
|
|
|
|
|
*/
|
2001-03-14 04:14:58 +00:00
|
|
|
if (ct->ct_syshandle == 0) {
|
2004-01-29 02:40:43 +00:00
|
|
|
if ((ct->ct_flags & CT2_SENDSTATUS) == 0) {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl,
|
|
|
|
|
"intermediate CTIO completed ok");
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl,
|
|
|
|
|
"unmonitored CTIO completed ok");
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
} else {
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl,
|
|
|
|
|
"NO xs for CTIO (handle 0x%x) status 0x%x",
|
2001-03-14 04:14:58 +00:00
|
|
|
ct->ct_syshandle, ct->ct_status & ~QLTM_SVALID);
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
} else {
|
Spring MegaChange #1.
----
Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).
----
Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.
The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.
These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.
---
Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.
--
Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.
Do some more substantial target mode cleanups.
MFC after: 8 weeks
2001-05-28 21:20:43 +00:00
|
|
|
if ((ct->ct_flags & CT2_DATAMASK) != CT2_NO_DATA) {
|
|
|
|
|
ISP_DMAFREE(isp, xs, ct->ct_syshandle);
|
|
|
|
|
}
|
2004-01-29 02:40:43 +00:00
|
|
|
if (ct->ct_flags & CT2_SENDSTATUS) {
|
2000-01-04 00:00:08 +00:00
|
|
|
/*
|
|
|
|
|
* Sent status and command complete.
|
|
|
|
|
*
|
|
|
|
|
* We're now really done with this command, so we
|
|
|
|
|
* punt to the platform dependent layers because
|
|
|
|
|
* only there can we do the appropriate command
|
|
|
|
|
* complete thread synchronization.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl, "status CTIO complete");
|
2000-01-04 00:00:08 +00:00
|
|
|
} else {
|
|
|
|
|
/*
|
|
|
|
|
* Final CTIO completed. Release DMA resources and
|
|
|
|
|
* notify platform dependent layers.
|
|
|
|
|
*/
|
2000-08-01 06:24:01 +00:00
|
|
|
isp_prt(isp, pl, "data CTIO complete");
|
2000-01-04 00:00:08 +00:00
|
|
|
}
|
|
|
|
|
(void) isp_async(isp, ISPASYNC_TARGET_ACTION, ct);
|
|
|
|
|
/*
|
|
|
|
|
* The platform layer will destroy the handle if appropriate.
|
|
|
|
|
*/
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif
|
