freebsd-skq/share/man/man4/ppi.4

.\" Copyright (c) 1997
.\"      Michael Smith
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer as
.\"    the first lines of this file unmodified.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS''
.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
.\" LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd January 2, 1998
.Dt PPI 4
.Os
.Sh NAME
.Nm ppi
.Nd "user-space interface to ppbus parallel 'geek' port"
.Sh SYNOPSIS
.Cd "device ppi"
.Pp
Minor numbering:  Unit numbers correspond directly to ppbus numbers.
.Sh DESCRIPTION
The
.Nm
driver provides a convenient means for user applications to manipulate the
state of the parallel port, enabling easy low-speed I/O operations without
the security problems inherent with the use of the
.Pa /dev/io
interface.
.Sh PROGRAMMING INTERFACE
.In dev/ppbus/ppi.h
.In dev/ppbus/ppbconf.h
.Pp
All I/O on the
.Nm
interface is performed using
.Fn ioctl
calls.
Each command takes a single
.Ft u_int8_t
argument, transferring one byte of data.
The following commands are available:
.Bl -tag -width indent
.It Dv PPIGDATA , PPISDATA
Get and set the contents of the data register.
.It Dv PPIGSTATUS , PPISSTATUS
Get and set the contents of the status register.
.It Dv PPIGCTRL , PPISCTRL
Get and set the contents of the control register.
The following defines correspond to bits in this register.
Setting a bit in the control register drives the corresponding output low.
.Bl -tag -width indent -compact
.It Dv STROBE
.It Dv AUTOFEED
.It Dv nINIT
.It Dv SELECTIN
.It Dv PCD
.El
.It Dv PPIGEPP , PPISEPP
Get and set the contents of the EPP control register.
.It Dv PPIGECR , PPISECR
Get and set the contents of the ECP control register.
.It Dv PPIGFIFO , PPISFIFO
Read and write the ECP FIFO (8-bit operations only).
.El
.Sh EXAMPLES
To present the value 0x5a to the data port, drive STROBE low and then high
again, the following code fragment can be used:
.Bd -literal -compact

	int		fd;
	u_int8_t	val;

	val = 0x5a;
	ioctl(fd, PPISDATA, &val);
	ioctl(fd, PPIGCTRL, &val);
	val |= STROBE;
	ioctl(fd, PPISCTRL, &val);
	val &= ~STROBE;
	ioctl(fd, PPISCTRL, &val);

.Ed
.Sh BUGS
The inverse sense of signals is confusing.
.Pp
The
.Fn ioctl
interface is slow, and there is no way (yet) to chain multiple operations together.
.Pp
The headers required for user applications are not installed as part of the
standard system.