freebsd-skq/sys/boot/zfs/zfs.c

908 lines
20 KiB
C
Raw Normal View History

Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*-
* Copyright (c) 2007 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Stand-alone file reading package.
*/
#include <sys/disk.h>
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#include <sys/param.h>
#include <sys/time.h>
#include <sys/queue.h>
#include <part.h>
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#include <stddef.h>
#include <stdarg.h>
#include <string.h>
#include <stand.h>
#include <bootstrap.h>
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
#include "libzfs.h"
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
#include "zfsimpl.c"
2010-09-17 22:51:45 +00:00
/* Define the range of indexes to be populated with ZFS Boot Environments */
#define ZFS_BE_FIRST 4
#define ZFS_BE_LAST 8
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static int zfs_open(const char *path, struct open_file *f);
static int zfs_write(struct open_file *f, void *buf, size_t size, size_t *resid);
static int zfs_close(struct open_file *f);
static int zfs_read(struct open_file *f, void *buf, size_t size, size_t *resid);
static off_t zfs_seek(struct open_file *f, off_t offset, int where);
static int zfs_stat(struct open_file *f, struct stat *sb);
static int zfs_readdir(struct open_file *f, struct dirent *d);
struct devsw zfs_dev;
struct fs_ops zfs_fsops = {
"zfs",
zfs_open,
zfs_close,
zfs_read,
zfs_write,
zfs_seek,
zfs_stat,
zfs_readdir
};
/*
* In-core open file.
*/
struct file {
off_t f_seekp; /* seek pointer */
dnode_phys_t f_dnode;
uint64_t f_zap_type; /* zap type for readdir */
uint64_t f_num_leafs; /* number of fzap leaf blocks */
zap_leaf_phys_t *f_zap_leaf; /* zap leaf buffer */
};
static int zfs_env_index;
static int zfs_env_count;
SLIST_HEAD(zfs_be_list, zfs_be_entry) zfs_be_head = SLIST_HEAD_INITIALIZER(zfs_be_head);
struct zfs_be_list *zfs_be_headp;
struct zfs_be_entry {
const char *name;
SLIST_ENTRY(zfs_be_entry) entries;
} *zfs_be, *zfs_be_tmp;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Open a file.
*/
static int
zfs_open(const char *upath, struct open_file *f)
{
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
struct zfsmount *mount = (struct zfsmount *)f->f_devdata;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
struct file *fp;
int rc;
if (f->f_dev != &zfs_dev)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EINVAL);
/* allocate file system specific data structure */
fp = malloc(sizeof(struct file));
bzero(fp, sizeof(struct file));
f->f_fsdata = (void *)fp;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
rc = zfs_lookup(mount, upath, &fp->f_dnode);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
fp->f_seekp = 0;
if (rc) {
f->f_fsdata = NULL;
free(fp);
}
return (rc);
}
static int
zfs_close(struct open_file *f)
{
struct file *fp = (struct file *)f->f_fsdata;
dnode_cache_obj = 0;
f->f_fsdata = (void *)0;
if (fp == (struct file *)0)
return (0);
free(fp);
return (0);
}
/*
* Copy a portion of a file into kernel memory.
* Cross block boundaries when necessary.
*/
static int
zfs_read(struct open_file *f, void *start, size_t size, size_t *resid /* out */)
{
const spa_t *spa = ((struct zfsmount *)f->f_devdata)->spa;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
struct file *fp = (struct file *)f->f_fsdata;
struct stat sb;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
size_t n;
int rc;
rc = zfs_stat(f, &sb);
if (rc)
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
n = size;
if (fp->f_seekp + n > sb.st_size)
n = sb.st_size - fp->f_seekp;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
rc = dnode_read(spa, &fp->f_dnode, fp->f_seekp, start, n);
if (rc)
return (rc);
if (0) {
int i;
for (i = 0; i < n; i++)
putchar(((char*) start)[i]);
}
fp->f_seekp += n;
if (resid)
*resid = size - n;
return (0);
}
/*
* Don't be silly - the bootstrap has no business writing anything.
*/
static int
zfs_write(struct open_file *f, void *start, size_t size, size_t *resid /* out */)
{
return (EROFS);
}
static off_t
zfs_seek(struct open_file *f, off_t offset, int where)
{
struct file *fp = (struct file *)f->f_fsdata;
switch (where) {
case SEEK_SET:
fp->f_seekp = offset;
break;
case SEEK_CUR:
fp->f_seekp += offset;
break;
case SEEK_END:
{
struct stat sb;
int error;
error = zfs_stat(f, &sb);
if (error != 0) {
errno = error;
return (-1);
}
fp->f_seekp = sb.st_size - offset;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
break;
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
default:
errno = EINVAL;
return (-1);
}
return (fp->f_seekp);
}
static int
zfs_stat(struct open_file *f, struct stat *sb)
{
const spa_t *spa = ((struct zfsmount *)f->f_devdata)->spa;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
struct file *fp = (struct file *)f->f_fsdata;
return (zfs_dnode_stat(spa, &fp->f_dnode, sb));
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
zfs_readdir(struct open_file *f, struct dirent *d)
{
const spa_t *spa = ((struct zfsmount *)f->f_devdata)->spa;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
struct file *fp = (struct file *)f->f_fsdata;
mzap_ent_phys_t mze;
struct stat sb;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
size_t bsize = fp->f_dnode.dn_datablkszsec << SPA_MINBLOCKSHIFT;
int rc;
rc = zfs_stat(f, &sb);
if (rc)
return (rc);
if (!S_ISDIR(sb.st_mode))
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (ENOTDIR);
/*
* If this is the first read, get the zap type.
*/
if (fp->f_seekp == 0) {
rc = dnode_read(spa, &fp->f_dnode,
0, &fp->f_zap_type, sizeof(fp->f_zap_type));
if (rc)
return (rc);
if (fp->f_zap_type == ZBT_MICRO) {
fp->f_seekp = offsetof(mzap_phys_t, mz_chunk);
} else {
rc = dnode_read(spa, &fp->f_dnode,
offsetof(zap_phys_t, zap_num_leafs),
&fp->f_num_leafs,
sizeof(fp->f_num_leafs));
if (rc)
return (rc);
fp->f_seekp = bsize;
fp->f_zap_leaf = (zap_leaf_phys_t *)malloc(bsize);
rc = dnode_read(spa, &fp->f_dnode,
fp->f_seekp,
fp->f_zap_leaf,
bsize);
if (rc)
return (rc);
}
}
if (fp->f_zap_type == ZBT_MICRO) {
mzap_next:
if (fp->f_seekp >= bsize)
return (ENOENT);
rc = dnode_read(spa, &fp->f_dnode,
fp->f_seekp, &mze, sizeof(mze));
if (rc)
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
fp->f_seekp += sizeof(mze);
if (!mze.mze_name[0])
goto mzap_next;
d->d_fileno = ZFS_DIRENT_OBJ(mze.mze_value);
d->d_type = ZFS_DIRENT_TYPE(mze.mze_value);
strcpy(d->d_name, mze.mze_name);
d->d_namlen = strlen(d->d_name);
return (0);
} else {
zap_leaf_t zl;
zap_leaf_chunk_t *zc, *nc;
int chunk;
size_t namelen;
char *p;
uint64_t value;
/*
* Initialise this so we can use the ZAP size
* calculating macros.
*/
zl.l_bs = ilog2(bsize);
zl.l_phys = fp->f_zap_leaf;
/*
* Figure out which chunk we are currently looking at
* and consider seeking to the next leaf. We use the
* low bits of f_seekp as a simple chunk index.
*/
fzap_next:
chunk = fp->f_seekp & (bsize - 1);
if (chunk == ZAP_LEAF_NUMCHUNKS(&zl)) {
fp->f_seekp = rounddown2(fp->f_seekp, bsize) + bsize;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
chunk = 0;
/*
* Check for EOF and read the new leaf.
*/
if (fp->f_seekp >= bsize * fp->f_num_leafs)
return (ENOENT);
rc = dnode_read(spa, &fp->f_dnode,
fp->f_seekp,
fp->f_zap_leaf,
bsize);
if (rc)
return (rc);
}
zc = &ZAP_LEAF_CHUNK(&zl, chunk);
fp->f_seekp++;
if (zc->l_entry.le_type != ZAP_CHUNK_ENTRY)
goto fzap_next;
namelen = zc->l_entry.le_name_numints;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (namelen > sizeof(d->d_name))
namelen = sizeof(d->d_name);
/*
* Paste the name back together.
*/
nc = &ZAP_LEAF_CHUNK(&zl, zc->l_entry.le_name_chunk);
p = d->d_name;
while (namelen > 0) {
int len;
len = namelen;
if (len > ZAP_LEAF_ARRAY_BYTES)
len = ZAP_LEAF_ARRAY_BYTES;
memcpy(p, nc->l_array.la_array, len);
p += len;
namelen -= len;
nc = &ZAP_LEAF_CHUNK(&zl, nc->l_array.la_next);
}
d->d_name[sizeof(d->d_name) - 1] = 0;
/*
* Assume the first eight bytes of the value are
* a uint64_t.
*/
value = fzap_leaf_value(&zl, zc);
d->d_fileno = ZFS_DIRENT_OBJ(value);
d->d_type = ZFS_DIRENT_TYPE(value);
d->d_namlen = strlen(d->d_name);
return (0);
}
}
static int
vdev_read(vdev_t *vdev, void *priv, off_t offset, void *buf, size_t size)
{
int fd;
fd = (uintptr_t) priv;
lseek(fd, offset, SEEK_SET);
if (read(fd, buf, size) == size) {
return 0;
} else {
return (EIO);
}
}
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
static int
zfs_dev_init(void)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
spa_t *spa;
spa_t *next;
spa_t *prev;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
zfs_init();
if (archsw.arch_zfs_probe == NULL)
return (ENXIO);
archsw.arch_zfs_probe();
prev = NULL;
spa = STAILQ_FIRST(&zfs_pools);
while (spa != NULL) {
next = STAILQ_NEXT(spa, spa_link);
if (zfs_spa_init(spa)) {
if (prev == NULL)
STAILQ_REMOVE_HEAD(&zfs_pools, spa_link);
else
STAILQ_REMOVE_AFTER(&zfs_pools, prev, spa_link);
} else
prev = spa;
spa = next;
}
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (0);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
struct zfs_probe_args {
int fd;
const char *devname;
uint64_t *pool_guid;
u_int secsz;
};
static int
zfs_diskread(void *arg, void *buf, size_t blocks, uint64_t offset)
{
struct zfs_probe_args *ppa;
ppa = (struct zfs_probe_args *)arg;
return (vdev_read(NULL, (void *)(uintptr_t)ppa->fd,
offset * ppa->secsz, buf, blocks * ppa->secsz));
}
static int
zfs_probe(int fd, uint64_t *pool_guid)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
spa_t *spa;
int ret;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
ret = vdev_probe(vdev_read, (void *)(uintptr_t)fd, &spa);
if (ret == 0 && pool_guid != NULL)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
*pool_guid = spa->spa_guid;
return (ret);
}
static int
zfs_probe_partition(void *arg, const char *partname,
const struct ptable_entry *part)
{
struct zfs_probe_args *ppa, pa;
struct ptable *table;
char devname[32];
int ret;
/* Probe only freebsd-zfs and freebsd partitions */
if (part->type != PART_FREEBSD &&
part->type != PART_FREEBSD_ZFS)
return (0);
ppa = (struct zfs_probe_args *)arg;
strncpy(devname, ppa->devname, strlen(ppa->devname) - 1);
devname[strlen(ppa->devname) - 1] = '\0';
sprintf(devname, "%s%s:", devname, partname);
pa.fd = open(devname, O_RDONLY);
if (pa.fd == -1)
return (0);
ret = zfs_probe(pa.fd, ppa->pool_guid);
if (ret == 0)
return (0);
/* Do we have BSD label here? */
if (part->type == PART_FREEBSD) {
pa.devname = devname;
pa.pool_guid = ppa->pool_guid;
pa.secsz = ppa->secsz;
table = ptable_open(&pa, part->end - part->start + 1,
ppa->secsz, zfs_diskread);
if (table != NULL) {
ptable_iterate(table, &pa, zfs_probe_partition);
ptable_close(table);
}
}
close(pa.fd);
return (0);
}
int
zfs_probe_dev(const char *devname, uint64_t *pool_guid)
{
struct ptable *table;
struct zfs_probe_args pa;
off_t mediasz;
int ret;
pa.fd = open(devname, O_RDONLY);
if (pa.fd == -1)
return (ENXIO);
/* Probe the whole disk */
ret = zfs_probe(pa.fd, pool_guid);
if (ret == 0)
return (0);
/* Probe each partition */
ret = ioctl(pa.fd, DIOCGMEDIASIZE, &mediasz);
if (ret == 0)
ret = ioctl(pa.fd, DIOCGSECTORSIZE, &pa.secsz);
if (ret == 0) {
pa.devname = devname;
pa.pool_guid = pool_guid;
table = ptable_open(&pa, mediasz / pa.secsz, pa.secsz,
zfs_diskread);
if (table != NULL) {
ptable_iterate(table, &pa, zfs_probe_partition);
ptable_close(table);
}
}
close(pa.fd);
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
/*
* Print information about ZFS pools
*/
static int
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
zfs_dev_print(int verbose)
{
spa_t *spa;
char line[80];
int ret = 0;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (STAILQ_EMPTY(&zfs_pools))
return (0);
printf("%s devices:", zfs_dev.dv_name);
if ((ret = pager_output("\n")) != 0)
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (verbose) {
return (spa_all_status());
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
STAILQ_FOREACH(spa, &zfs_pools, spa_link) {
snprintf(line, sizeof(line), " zfs:%s\n", spa->spa_name);
ret = pager_output(line);
if (ret != 0)
break;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
/*
* Attempt to open the pool described by (dev) for use by (f).
*/
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
static int
zfs_dev_open(struct open_file *f, ...)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
{
va_list args;
struct zfs_devdesc *dev;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
struct zfsmount *mount;
spa_t *spa;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
int rv;
va_start(args, f);
dev = va_arg(args, struct zfs_devdesc *);
va_end(args);
if (dev->pool_guid == 0)
spa = STAILQ_FIRST(&zfs_pools);
else
spa = spa_find_by_guid(dev->pool_guid);
if (!spa)
return (ENXIO);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
mount = malloc(sizeof(*mount));
rv = zfs_mount(spa, dev->root_guid, mount);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (rv != 0) {
free(mount);
return (rv);
}
if (mount->objset.os_type != DMU_OST_ZFS) {
printf("Unexpected object set type %ju\n",
(uintmax_t)mount->objset.os_type);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
free(mount);
return (EIO);
}
f->f_devdata = mount;
free(dev);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (0);
}
static int
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
zfs_dev_close(struct open_file *f)
{
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
free(f->f_devdata);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
f->f_devdata = NULL;
return (0);
}
static int
zfs_dev_strategy(void *devdata, int rw, daddr_t dblk, size_t size, char *buf, size_t *rsize)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
return (ENOSYS);
}
struct devsw zfs_dev = {
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
.dv_name = "zfs",
.dv_type = DEVT_ZFS,
.dv_init = zfs_dev_init,
.dv_strategy = zfs_dev_strategy,
.dv_open = zfs_dev_open,
.dv_close = zfs_dev_close,
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
.dv_ioctl = noioctl,
.dv_print = zfs_dev_print,
.dv_cleanup = NULL
};
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
int
zfs_parsedev(struct zfs_devdesc *dev, const char *devspec, const char **path)
{
static char rootname[ZFS_MAXNAMELEN];
static char poolname[ZFS_MAXNAMELEN];
spa_t *spa;
const char *end;
const char *np;
const char *sep;
int rv;
np = devspec;
if (*np != ':')
return (EINVAL);
np++;
end = strchr(np, ':');
if (end == NULL)
return (EINVAL);
sep = strchr(np, '/');
if (sep == NULL || sep >= end)
sep = end;
memcpy(poolname, np, sep - np);
poolname[sep - np] = '\0';
if (sep < end) {
sep++;
memcpy(rootname, sep, end - sep);
rootname[end - sep] = '\0';
}
else
rootname[0] = '\0';
spa = spa_find_by_name(poolname);
if (!spa)
return (ENXIO);
dev->pool_guid = spa->spa_guid;
rv = zfs_lookup_dataset(spa, rootname, &dev->root_guid);
if (rv != 0)
return (rv);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (path != NULL)
*path = (*end == '\0') ? end : end + 1;
dev->d_dev = &zfs_dev;
dev->d_type = zfs_dev.dv_type;
return (0);
}
char *
zfs_fmtdev(void *vdev)
{
static char rootname[ZFS_MAXNAMELEN];
static char buf[2 * ZFS_MAXNAMELEN + 8];
struct zfs_devdesc *dev = (struct zfs_devdesc *)vdev;
spa_t *spa;
buf[0] = '\0';
if (dev->d_type != DEVT_ZFS)
return (buf);
if (dev->pool_guid == 0) {
spa = STAILQ_FIRST(&zfs_pools);
dev->pool_guid = spa->spa_guid;
} else
spa = spa_find_by_guid(dev->pool_guid);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (spa == NULL) {
printf("ZFS: can't find pool by guid\n");
return (buf);
}
if (dev->root_guid == 0 && zfs_get_root(spa, &dev->root_guid)) {
printf("ZFS: can't find root filesystem\n");
return (buf);
}
if (zfs_rlookup(spa, dev->root_guid, rootname)) {
printf("ZFS: can't find filesystem by guid\n");
return (buf);
}
if (rootname[0] == '\0')
sprintf(buf, "%s:%s:", dev->d_dev->dv_name, spa->spa_name);
else
sprintf(buf, "%s:%s/%s:", dev->d_dev->dv_name, spa->spa_name,
rootname);
return (buf);
}
int
zfs_list(const char *name)
{
static char poolname[ZFS_MAXNAMELEN];
uint64_t objid;
spa_t *spa;
const char *dsname;
int len;
int rv;
len = strlen(name);
dsname = strchr(name, '/');
if (dsname != NULL) {
len = dsname - name;
dsname++;
} else
dsname = "";
memcpy(poolname, name, len);
poolname[len] = '\0';
spa = spa_find_by_name(poolname);
if (!spa)
return (ENXIO);
rv = zfs_lookup_dataset(spa, dsname, &objid);
if (rv != 0)
return (rv);
return (zfs_list_dataset(spa, objid));
}
void
init_zfs_bootenv(char *currdev)
{
char *beroot;
if (strlen(currdev) == 0)
return;
if(strncmp(currdev, "zfs:", 4) != 0)
return;
/* Remove the trailing : */
currdev[strlen(currdev) - 1] = '\0';
setenv("zfs_be_active", currdev, 1);
setenv("zfs_be_currpage", "1", 1);
/* Forward past zfs: */
currdev = strchr(currdev, ':');
currdev++;
/* Remove the last element (current bootenv) */
beroot = strrchr(currdev, '/');
if (beroot != NULL)
beroot[0] = '\0';
beroot = currdev;
setenv("zfs_be_root", beroot, 1);
}
int
zfs_bootenv(const char *name)
{
static char poolname[ZFS_MAXNAMELEN], *dsname, *root;
char becount[4];
uint64_t objid;
spa_t *spa;
int len, rv, pages, perpage, currpage;
if (name == NULL)
return (EINVAL);
if ((root = getenv("zfs_be_root")) == NULL)
return (EINVAL);
if (strcmp(name, root) != 0) {
if (setenv("zfs_be_root", name, 1) != 0)
return (ENOMEM);
}
SLIST_INIT(&zfs_be_head);
zfs_env_count = 0;
len = strlen(name);
dsname = strchr(name, '/');
if (dsname != NULL) {
len = dsname - name;
dsname++;
} else
dsname = "";
memcpy(poolname, name, len);
poolname[len] = '\0';
spa = spa_find_by_name(poolname);
if (!spa)
return (ENXIO);
rv = zfs_lookup_dataset(spa, dsname, &objid);
if (rv != 0)
return (rv);
rv = zfs_callback_dataset(spa, objid, zfs_belist_add);
/* Calculate and store the number of pages of BEs */
perpage = (ZFS_BE_LAST - ZFS_BE_FIRST + 1);
pages = (zfs_env_count / perpage) + ((zfs_env_count % perpage) > 0 ? 1 : 0);
snprintf(becount, 4, "%d", pages);
if (setenv("zfs_be_pages", becount, 1) != 0)
return (ENOMEM);
/* Roll over the page counter if it has exceeded the maximum */
currpage = strtol(getenv("zfs_be_currpage"), NULL, 10);
if (currpage > pages) {
if (setenv("zfs_be_currpage", "1", 1) != 0)
return (ENOMEM);
}
/* Populate the menu environment variables */
zfs_set_env();
/* Clean up the SLIST of ZFS BEs */
while (!SLIST_EMPTY(&zfs_be_head)) {
zfs_be = SLIST_FIRST(&zfs_be_head);
SLIST_REMOVE_HEAD(&zfs_be_head, entries);
free(zfs_be);
}
return (rv);
}
int
zfs_belist_add(const char *name, uint64_t value __unused)
{
/* Skip special datasets that start with a $ character */
if (strncmp(name, "$", 1) == 0) {
return (0);
}
/* Add the boot environment to the head of the SLIST */
zfs_be = malloc(sizeof(struct zfs_be_entry));
if (zfs_be == NULL) {
return (ENOMEM);
}
zfs_be->name = name;
SLIST_INSERT_HEAD(&zfs_be_head, zfs_be, entries);
zfs_env_count++;
return (0);
}
int
zfs_set_env(void)
{
char envname[32], envval[256];
char *beroot, *pagenum;
int rv, page, ctr;
beroot = getenv("zfs_be_root");
if (beroot == NULL) {
return (1);
}
pagenum = getenv("zfs_be_currpage");
if (pagenum != NULL) {
page = strtol(pagenum, NULL, 10);
} else {
page = 1;
}
ctr = 1;
rv = 0;
zfs_env_index = ZFS_BE_FIRST;
SLIST_FOREACH_SAFE(zfs_be, &zfs_be_head, entries, zfs_be_tmp) {
/* Skip to the requested page number */
if (ctr <= ((ZFS_BE_LAST - ZFS_BE_FIRST + 1) * (page - 1))) {
ctr++;
continue;
}
snprintf(envname, sizeof(envname), "bootenvmenu_caption[%d]", zfs_env_index);
snprintf(envval, sizeof(envval), "%s", zfs_be->name);
rv = setenv(envname, envval, 1);
if (rv != 0) {
break;
}
snprintf(envname, sizeof(envname), "bootenvansi_caption[%d]", zfs_env_index);
rv = setenv(envname, envval, 1);
if (rv != 0){
break;
}
snprintf(envname, sizeof(envname), "bootenvmenu_command[%d]", zfs_env_index);
rv = setenv(envname, "set_bootenv", 1);
if (rv != 0){
break;
}
snprintf(envname, sizeof(envname), "bootenv_root[%d]", zfs_env_index);
snprintf(envval, sizeof(envval), "zfs:%s/%s", beroot, zfs_be->name);
rv = setenv(envname, envval, 1);
if (rv != 0){
break;
}
zfs_env_index++;
if (zfs_env_index > ZFS_BE_LAST) {
break;
}
}
for (; zfs_env_index <= ZFS_BE_LAST; zfs_env_index++) {
snprintf(envname, sizeof(envname), "bootenvmenu_caption[%d]", zfs_env_index);
(void)unsetenv(envname);
snprintf(envname, sizeof(envname), "bootenvansi_caption[%d]", zfs_env_index);
(void)unsetenv(envname);
snprintf(envname, sizeof(envname), "bootenvmenu_command[%d]", zfs_env_index);
(void)unsetenv(envname);
snprintf(envname, sizeof(envname), "bootenv_root[%d]", zfs_env_index);
(void)unsetenv(envname);
}
return (rv);
}