freebsd-skq/sys/amd64/include/pmap.h

331 lines
10 KiB
C
Raw Normal View History

/*-
2003-11-08 04:39:22 +00:00
* Copyright (c) 2003 Peter Wemm.
1993-06-12 14:58:17 +00:00
* Copyright (c) 1991 Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department and William Jolitz of UUNET Technologies Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Derived from hp300 version by Mike Hibler, this version by William
* Jolitz uses a recursive map [a pde points to the page directory] to
* map the page tables using the pagetables themselves. This is done to
* reduce the impact on kernel virtual memory for lots of sparse address
* space, and to reduce the cost of memory to each process.
*
* from: hp300: @(#)pmap.h 7.2 (Berkeley) 12/16/90
* from: @(#)pmap.h 7.4 (Berkeley) 5/12/91
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1993-06-12 14:58:17 +00:00
*/
#ifndef _MACHINE_PMAP_H_
#define _MACHINE_PMAP_H_
1993-06-12 14:58:17 +00:00
/*
* Page-directory and page-table entries follow this format, with a few
* of the fields not present here and there, depending on a lot of things.
*/
/* ---- Intel Nomenclature ---- */
#define PG_V 0x001 /* P Valid */
#define PG_RW 0x002 /* R/W Read/Write */
#define PG_U 0x004 /* U/S User/Supervisor */
#define PG_NC_PWT 0x008 /* PWT Write through */
#define PG_NC_PCD 0x010 /* PCD Cache disable */
#define PG_A 0x020 /* A Accessed */
#define PG_M 0x040 /* D Dirty */
#define PG_PS 0x080 /* PS Page size (0=4k,1=2M) */
#define PG_PTE_PAT 0x080 /* PAT PAT index */
#define PG_G 0x100 /* G Global */
#define PG_AVAIL1 0x200 /* / Available for system */
#define PG_AVAIL2 0x400 /* < programmers use */
#define PG_AVAIL3 0x800 /* \ */
#define PG_PDE_PAT 0x1000 /* PAT PAT index */
#define PG_NX (1ul<<63) /* No-execute */
/* Our various interpretations of the above */
#define PG_W PG_AVAIL1 /* "Wired" pseudoflag */
This set of commits to the VM system does the following, and contain contributions or ideas from Stephen McKay <syssgm@devetir.qld.gov.au>, Alan Cox <alc@cs.rice.edu>, David Greenman <davidg@freebsd.org> and me: More usage of the TAILQ macros. Additional minor fix to queue.h. Performance enhancements to the pageout daemon. Addition of a wait in the case that the pageout daemon has to run immediately. Slightly modify the pageout algorithm. Significant revamp of the pmap/fork code: 1) PTE's and UPAGES's are NO LONGER in the process's map. 2) PTE's and UPAGES's reside in their own objects. 3) TOTAL elimination of recursive page table pagefaults. 4) The page directory now resides in the PTE object. 5) Implemented pmap_copy, thereby speeding up fork time. 6) Changed the pv entries so that the head is a pointer and not an entire entry. 7) Significant cleanup of pmap_protect, and pmap_remove. 8) Removed significant amounts of machine dependent fork code from vm_glue. Pushed much of that code into the machine dependent pmap module. 9) Support more completely the reuse of already zeroed pages (Page table pages and page directories) as being already zeroed. Performance and code cleanups in vm_map: 1) Improved and simplified allocation of map entries. 2) Improved vm_map_copy code. 3) Corrected some minor problems in the simplify code. Implemented splvm (combo of splbio and splimp.) The VM code now seldom uses splhigh. Improved the speed of and simplified kmem_malloc. Minor mod to vm_fault to avoid using pre-zeroed pages in the case of objects with backing objects along with the already existant condition of having a vnode. (If there is a backing object, there will likely be a COW... With a COW, it isn't necessary to start with a pre-zeroed page.) Minor reorg of source to perhaps improve locality of ref.
1996-05-18 03:38:05 +00:00
#define PG_MANAGED PG_AVAIL2
#define PG_FRAME (0x000ffffffffff000ul)
#define PG_PS_FRAME (0x000fffffffe00000ul)
#define PG_PROT (PG_RW|PG_U) /* all protection bits . */
#define PG_N (PG_NC_PWT|PG_NC_PCD) /* Non-cacheable */
1993-06-12 14:58:17 +00:00
/* Page level cache control fields used to determine the PAT type */
#define PG_PDE_CACHE (PG_PDE_PAT | PG_NC_PWT | PG_NC_PCD)
#define PG_PTE_CACHE (PG_PTE_PAT | PG_NC_PWT | PG_NC_PCD)
/*
* Promotion to a 2MB (PDE) page mapping requires that the corresponding 4KB
* (PTE) page mappings have identical settings for the following fields:
*/
#define PG_PTE_PROMOTE (PG_NX | PG_MANAGED | PG_W | PG_G | PG_PTE_PAT | \
PG_M | PG_A | PG_NC_PCD | PG_NC_PWT | PG_U | PG_RW | PG_V)
/*
* Page Protection Exception bits
*/
#define PGEX_P 0x01 /* Protection violation vs. not present */
#define PGEX_W 0x02 /* during a Write cycle */
#define PGEX_U 0x04 /* access from User mode (UPL) */
#define PGEX_RSV 0x08 /* reserved PTE field is non-zero */
#define PGEX_I 0x10 /* during an instruction fetch */
/*
* Pte related macros. This is complicated by having to deal with
* the sign extension of the 48th bit.
*/
#define KVADDR(l4, l3, l2, l1) ( \
((unsigned long)-1 << 47) | \
((unsigned long)(l4) << PML4SHIFT) | \
((unsigned long)(l3) << PDPSHIFT) | \
((unsigned long)(l2) << PDRSHIFT) | \
((unsigned long)(l1) << PAGE_SHIFT))
#define UVADDR(l4, l3, l2, l1) ( \
((unsigned long)(l4) << PML4SHIFT) | \
((unsigned long)(l3) << PDPSHIFT) | \
((unsigned long)(l2) << PDRSHIFT) | \
((unsigned long)(l1) << PAGE_SHIFT))
1993-06-12 14:58:17 +00:00
/* Initial number of kernel page tables. */
#ifndef NKPT
#define NKPT 32
#endif
#define NKPML4E 1 /* number of kernel PML4 slots */
#define NKPDPE howmany(NKPT, NPDEPG)/* number of kernel PDP slots */
#define NUPML4E (NPML4EPG/2) /* number of userland PML4 pages */
#define NUPDPE (NUPML4E*NPDPEPG)/* number of userland PDP pages */
#define NUPDE (NUPDPE*NPDEPG) /* number of userland PD entries */
#define NDMPML4E 1 /* number of dmap PML4 slots */
/*
* The *PDI values control the layout of virtual memory
*/
#define PML4PML4I (NPML4EPG/2) /* Index of recursive pml4 mapping */
#define KPML4I (NPML4EPG-1) /* Top 512GB for KVM */
#define DMPML4I (KPML4I-1) /* Next 512GB down for direct map */
#define KPDPI (NPDPEPG-2) /* kernbase at -2GB */
First steps in rewriting locore.s, and making info useful when the machine panics. i386/i386/locore.s: 1) got rid of most .set directives that were being used like #define's, and replaced them with appropriate #define's in the appropriate header files (accessed via genassym). 2) added comments to header inclusions and global definitions, and global variables 3) replaced some hardcoded constants with cpp defines (such as PDESIZE and others) 4) aligned all comments to the same column to make them easier to read 5) moved macro definitions for ENTRY, ALIGN, NOP, etc. to /sys/i386/include/asmacros.h 6) added #ifdef BDE_DEBUGGER around all of Bruce's debugger code 7) added new global '_KERNend' to store last location+1 of kernel 8) cleaned up zeroing of bss so that only bss is zeroed 9) fix zeroing of page tables so that it really does zero them all - not just if they follow the bss. 10) rewrote page table initialization code so that 1) works correctly and 2) write protects the kernel text by default 11) properly initialize the kernel page directory, upages, p0stack PT, and page tables. The previous scheme was more than a bit screwy. 12) change allocation of virtual area of IO hole so that it is fixed at KERNBASE + 0xa0000. The previous scheme put it right after the kernel page tables and then later expected it to be at KERNBASE +0xa0000 13) change multiple bogus settings of user read/write of various areas of kernel VM - including the IO hole; we should never be accessing the IO hole in user mode through the kernel page tables 14) split kernel support routines such as bcopy, bzero, copyin, copyout, etc. into a seperate file 'support.s' 15) split swtch and related routines into a seperate 'swtch.s' 16) split routines related to traps, syscalls, and interrupts into a seperate file 'exception.s' 17) remove some unused global variables from locore that got inserted by Garrett when he pulled them out of some .h files. i386/isa/icu.s: 1) clean up global variable declarations 2) move in declaration of astpending and netisr i386/i386/pmap.c: 1) fix calculation of virtual_avail. It previously was calculated to be right in the middle of the kernel page tables - not a good place to start allocating kernel VM. 2) properly allocate kernel page dir/tables etc out of kernel map - previously only took out 2 pages. i386/i386/machdep.c: 1) modify boot() to print a warning that the system will reboot in PANIC_REBOOT_WAIT_TIME amount of seconds, and let the user abort with a key on the console. The machine will wait for ever if a key is typed before the reboot. The default is 15 seconds, but can be set to 0 to mean don't wait at all, -1 to mean wait forever, or any positive value to wait for that many seconds. 2) print "Rebooting..." just before doing it. kern/subr_prf.c: 1) remove PANICWAIT as it is deprecated by the change to machdep.c i386/i386/trap.c: 1) add table of trap type strings and use it to print a real trap/ panic message rather than just a number. Lot's of work to be done here, but this is the first step. Symbolic traceback is in the TODO. i386/i386/Makefile.i386: 1) add support in to build support.s, exception.s and swtch.s ...and various changes to various header files to make all of the above happen.
1993-11-13 02:25:21 +00:00
/*
* XXX doesn't really belong here I guess...
*/
#define ISA_HOLE_START 0xa0000
#define ISA_HOLE_LENGTH (0x100000-ISA_HOLE_START)
#ifndef LOCORE
#include <sys/queue.h>
#include <sys/_lock.h>
#include <sys/_mutex.h>
typedef u_int64_t pd_entry_t;
typedef u_int64_t pt_entry_t;
typedef u_int64_t pdp_entry_t;
typedef u_int64_t pml4_entry_t;
#define PML4ESHIFT (3)
#define PDPESHIFT (3)
#define PTESHIFT (3)
#define PDESHIFT (3)
1993-06-12 14:58:17 +00:00
/*
* Address of current address space page table maps and directories.
1993-06-12 14:58:17 +00:00
*/
#ifdef _KERNEL
#define addr_PTmap (KVADDR(PML4PML4I, 0, 0, 0))
#define addr_PDmap (KVADDR(PML4PML4I, PML4PML4I, 0, 0))
#define addr_PDPmap (KVADDR(PML4PML4I, PML4PML4I, PML4PML4I, 0))
#define addr_PML4map (KVADDR(PML4PML4I, PML4PML4I, PML4PML4I, PML4PML4I))
#define addr_PML4pml4e (addr_PML4map + (PML4PML4I * sizeof(pml4_entry_t)))
#define PTmap ((pt_entry_t *)(addr_PTmap))
#define PDmap ((pd_entry_t *)(addr_PDmap))
#define PDPmap ((pd_entry_t *)(addr_PDPmap))
#define PML4map ((pd_entry_t *)(addr_PML4map))
#define PML4pml4e ((pd_entry_t *)(addr_PML4pml4e))
extern u_int64_t KPML4phys; /* physical address of kernel level 4 */
1993-06-12 14:58:17 +00:00
/*
* virtual address to page table entry and
* to physical address.
1993-06-12 14:58:17 +00:00
* Note: these work recursively, thus vtopte of a pte will give
* the corresponding pde that in turn maps it.
*/
pt_entry_t *vtopte(vm_offset_t);
#define vtophys(va) pmap_kextract(((vm_offset_t) (va)))
static __inline pt_entry_t
pte_load(pt_entry_t *ptep)
{
pt_entry_t r;
r = *ptep;
return (r);
}
static __inline pt_entry_t
pte_load_store(pt_entry_t *ptep, pt_entry_t pte)
{
pt_entry_t r;
__asm __volatile(
"xchgq %0,%1"
: "=m" (*ptep),
"=r" (r)
: "1" (pte),
"m" (*ptep));
return (r);
}
#define pte_load_clear(pte) atomic_readandclear_long(pte)
static __inline void
pte_store(pt_entry_t *ptep, pt_entry_t pte)
{
*ptep = pte;
}
#define pte_clear(ptep) pte_store((ptep), (pt_entry_t)0ULL)
#define pde_store(pdep, pde) pte_store((pdep), (pde))
extern pt_entry_t pg_nx;
#endif /* _KERNEL */
1993-06-12 14:58:17 +00:00
/*
* Pmap stuff
*/
struct pv_entry;
Shrink the amd64 pv entry from 48 bytes to about 24 bytes. On a machine with large mmap files mapped into many processes, this saves hundreds of megabytes of ram. pv entries were individually allocated and had two tailq entries and two pointers (or addresses). Each pv entry was linked to a vm_page_t and a process's address space (pmap). It had the virtual address and a pointer to the pmap. This change replaces the individual allocation with a per-process allocation system. A page ("pv chunk") is allocated and this provides 168 pv entries for that process. We can now eliminate one of the 16 byte tailq entries because we can simply iterate through the pv chunks to find all the pv entries for a process. We can eliminate one of the 8 byte pointers because the location of the pv entry implies the containing pv chunk, which has the pointer. After overheads from the pv chunk bitmap and tailq linkage, this works out that each pv entry has an effective size of 24.38 bytes. Future work still required, and other problems: * when running low on pv entries or system ram, we may need to defrag the chunk pages and free any spares. The stats (vm.pmap.*) show that this doesn't seem to be that much of a problem, but it can be done if needed. * running low on pv entries is now a much bigger problem. The old get_pv_entry() routine just needed to reclaim one other pv entry. Now, since they are per-process, we can only use pv entries that are assigned to our current process, or by stealing an entire page worth from another process. Under normal circumstances, the pmap_collect() code should be able to dislodge some pv entries from the current process. But if needed, it can still reclaim entire pv chunk pages from other processes. * This should port to i386 really easily, except there it would reduce pv entries from 24 bytes to about 12 bytes. (I have integrated Alan's recent changes.)
2006-04-03 21:36:01 +00:00
struct pv_chunk;
struct md_page {
TAILQ_HEAD(,pv_entry) pv_list;
Add support to the virtual memory system for configuring machine- dependent memory attributes: Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the fact that there are machine-dependent memory attributes that have nothing to do with controlling the cache's behavior. Introduce vm_object_set_memattr() for setting the default memory attributes that will be given to an object's pages. Introduce and use pmap_page_{get,set}_memattr() for getting and setting a page's machine-dependent memory attributes. Add full support for these functions on amd64 and i386 and stubs for them on the other architectures. The function pmap_page_set_memattr() is also responsible for any other machine-dependent aspects of changing a page's memory attributes, such as flushing the cache or updating the direct map. The uses include kmem_alloc_contig(), vm_page_alloc(), and the device pager: kmem_alloc_contig() can now be used to allocate kernel memory with non-default memory attributes on amd64 and i386. vm_page_alloc() and the device pager will set the memory attributes for the real or fictitious page according to the object's default memory attributes. Update the various pmap functions on amd64 and i386 that map pages to incorporate each page's memory attributes in the mapping. Notes: (1) Inherent to this design are safety features that prevent the specification of inconsistent memory attributes by different mappings on amd64 and i386. In addition, the device pager provides a warning when a device driver creates a fictitious page with memory attributes that are inconsistent with the real page that the fictitious page is an alias for. (2) Storing the machine-dependent memory attributes for amd64 and i386 as a dedicated "int" in "struct md_page" represents a compromise between space efficiency and the ease of MFCing these changes to RELENG_7. In collaboration with: jhb Approved by: re (kib)
2009-07-12 23:31:20 +00:00
int pat_mode;
};
1993-06-12 14:58:17 +00:00
/*
* The kernel virtual address (KVA) of the level 4 page table page is always
* within the direct map (DMAP) region.
*/
1993-06-12 14:58:17 +00:00
struct pmap {
struct mtx pm_mtx;
pml4_entry_t *pm_pml4; /* KVA of level 4 page table */
Shrink the amd64 pv entry from 48 bytes to about 24 bytes. On a machine with large mmap files mapped into many processes, this saves hundreds of megabytes of ram. pv entries were individually allocated and had two tailq entries and two pointers (or addresses). Each pv entry was linked to a vm_page_t and a process's address space (pmap). It had the virtual address and a pointer to the pmap. This change replaces the individual allocation with a per-process allocation system. A page ("pv chunk") is allocated and this provides 168 pv entries for that process. We can now eliminate one of the 16 byte tailq entries because we can simply iterate through the pv chunks to find all the pv entries for a process. We can eliminate one of the 8 byte pointers because the location of the pv entry implies the containing pv chunk, which has the pointer. After overheads from the pv chunk bitmap and tailq linkage, this works out that each pv entry has an effective size of 24.38 bytes. Future work still required, and other problems: * when running low on pv entries or system ram, we may need to defrag the chunk pages and free any spares. The stats (vm.pmap.*) show that this doesn't seem to be that much of a problem, but it can be done if needed. * running low on pv entries is now a much bigger problem. The old get_pv_entry() routine just needed to reclaim one other pv entry. Now, since they are per-process, we can only use pv entries that are assigned to our current process, or by stealing an entire page worth from another process. Under normal circumstances, the pmap_collect() code should be able to dislodge some pv entries from the current process. But if needed, it can still reclaim entire pv chunk pages from other processes. * This should port to i386 really easily, except there it would reduce pv entries from 24 bytes to about 12 bytes. (I have integrated Alan's recent changes.)
2006-04-03 21:36:01 +00:00
TAILQ_HEAD(,pv_chunk) pm_pvchunk; /* list of mappings in pmap */
u_int pm_active; /* active on cpus */
uint32_t pm_gen_count; /* generation count (pmap lock dropped) */
u_int pm_retries;
/* spare u_int here due to padding */
1993-06-12 14:58:17 +00:00
struct pmap_statistics pm_stats; /* pmap statistics */
vm_page_t pm_root; /* spare page table pages */
1993-06-12 14:58:17 +00:00
};
typedef struct pmap *pmap_t;
#ifdef _KERNEL
extern struct pmap kernel_pmap_store;
#define kernel_pmap (&kernel_pmap_store)
#define PMAP_LOCK(pmap) mtx_lock(&(pmap)->pm_mtx)
#define PMAP_LOCK_ASSERT(pmap, type) \
mtx_assert(&(pmap)->pm_mtx, (type))
#define PMAP_LOCK_DESTROY(pmap) mtx_destroy(&(pmap)->pm_mtx)
#define PMAP_LOCK_INIT(pmap) mtx_init(&(pmap)->pm_mtx, "pmap", \
NULL, MTX_DEF | MTX_DUPOK)
#define PMAP_LOCKED(pmap) mtx_owned(&(pmap)->pm_mtx)
#define PMAP_MTX(pmap) (&(pmap)->pm_mtx)
#define PMAP_TRYLOCK(pmap) mtx_trylock(&(pmap)->pm_mtx)
#define PMAP_UNLOCK(pmap) mtx_unlock(&(pmap)->pm_mtx)
1993-06-12 14:58:17 +00:00
#endif
/*
* For each vm_page_t, there is a list of all currently valid virtual
2006-11-13 06:26:57 +00:00
* mappings of that page. An entry is a pv_entry_t, the list is pv_list.
1993-06-12 14:58:17 +00:00
*/
typedef struct pv_entry {
vm_offset_t pv_va; /* virtual address for mapping */
TAILQ_ENTRY(pv_entry) pv_list;
1993-06-12 14:58:17 +00:00
} *pv_entry_t;
Shrink the amd64 pv entry from 48 bytes to about 24 bytes. On a machine with large mmap files mapped into many processes, this saves hundreds of megabytes of ram. pv entries were individually allocated and had two tailq entries and two pointers (or addresses). Each pv entry was linked to a vm_page_t and a process's address space (pmap). It had the virtual address and a pointer to the pmap. This change replaces the individual allocation with a per-process allocation system. A page ("pv chunk") is allocated and this provides 168 pv entries for that process. We can now eliminate one of the 16 byte tailq entries because we can simply iterate through the pv chunks to find all the pv entries for a process. We can eliminate one of the 8 byte pointers because the location of the pv entry implies the containing pv chunk, which has the pointer. After overheads from the pv chunk bitmap and tailq linkage, this works out that each pv entry has an effective size of 24.38 bytes. Future work still required, and other problems: * when running low on pv entries or system ram, we may need to defrag the chunk pages and free any spares. The stats (vm.pmap.*) show that this doesn't seem to be that much of a problem, but it can be done if needed. * running low on pv entries is now a much bigger problem. The old get_pv_entry() routine just needed to reclaim one other pv entry. Now, since they are per-process, we can only use pv entries that are assigned to our current process, or by stealing an entire page worth from another process. Under normal circumstances, the pmap_collect() code should be able to dislodge some pv entries from the current process. But if needed, it can still reclaim entire pv chunk pages from other processes. * This should port to i386 really easily, except there it would reduce pv entries from 24 bytes to about 12 bytes. (I have integrated Alan's recent changes.)
2006-04-03 21:36:01 +00:00
/*
* pv_entries are allocated in chunks per-process. This avoids the
* need to track per-pmap assignments.
*/
#define _NPCM 3
#define _NPCPV 168
struct pv_chunk {
pmap_t pc_pmap;
TAILQ_ENTRY(pv_chunk) pc_list;
uint64_t pc_map[_NPCM]; /* bitmap; 1 = free */
uint64_t pc_spare[2];
struct pv_entry pc_pventry[_NPCPV];
};
#ifdef _KERNEL
1993-06-12 14:58:17 +00:00
extern caddr_t CADDR1;
extern pt_entry_t *CMAP1;
extern vm_paddr_t phys_avail[];
extern vm_paddr_t dump_avail[];
extern vm_offset_t virtual_avail;
extern vm_offset_t virtual_end;
1993-06-12 14:58:17 +00:00
Add support to the virtual memory system for configuring machine- dependent memory attributes: Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the fact that there are machine-dependent memory attributes that have nothing to do with controlling the cache's behavior. Introduce vm_object_set_memattr() for setting the default memory attributes that will be given to an object's pages. Introduce and use pmap_page_{get,set}_memattr() for getting and setting a page's machine-dependent memory attributes. Add full support for these functions on amd64 and i386 and stubs for them on the other architectures. The function pmap_page_set_memattr() is also responsible for any other machine-dependent aspects of changing a page's memory attributes, such as flushing the cache or updating the direct map. The uses include kmem_alloc_contig(), vm_page_alloc(), and the device pager: kmem_alloc_contig() can now be used to allocate kernel memory with non-default memory attributes on amd64 and i386. vm_page_alloc() and the device pager will set the memory attributes for the real or fictitious page according to the object's default memory attributes. Update the various pmap functions on amd64 and i386 that map pages to incorporate each page's memory attributes in the mapping. Notes: (1) Inherent to this design are safety features that prevent the specification of inconsistent memory attributes by different mappings on amd64 and i386. In addition, the device pager provides a warning when a device driver creates a fictitious page with memory attributes that are inconsistent with the real page that the fictitious page is an alias for. (2) Storing the machine-dependent memory attributes for amd64 and i386 as a dedicated "int" in "struct md_page" represents a compromise between space efficiency and the ease of MFCing these changes to RELENG_7. In collaboration with: jhb Approved by: re (kib)
2009-07-12 23:31:20 +00:00
#define pmap_page_get_memattr(m) ((vm_memattr_t)(m)->md.pat_mode)
#define pmap_unmapbios(va, sz) pmap_unmapdev((va), (sz))
void pmap_bootstrap(vm_paddr_t *);
int pmap_change_attr(vm_offset_t, vm_size_t, int);
void pmap_init_pat(void);
void pmap_kenter(vm_offset_t va, vm_paddr_t pa);
void *pmap_kenter_temporary(vm_paddr_t pa, int i);
vm_paddr_t pmap_kextract(vm_offset_t);
void pmap_kremove(vm_offset_t);
void *pmap_mapbios(vm_paddr_t, vm_size_t);
void *pmap_mapdev(vm_paddr_t, vm_size_t);
void *pmap_mapdev_attr(vm_paddr_t, vm_size_t, int);
boolean_t pmap_page_is_mapped(vm_page_t m);
Add support to the virtual memory system for configuring machine- dependent memory attributes: Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the fact that there are machine-dependent memory attributes that have nothing to do with controlling the cache's behavior. Introduce vm_object_set_memattr() for setting the default memory attributes that will be given to an object's pages. Introduce and use pmap_page_{get,set}_memattr() for getting and setting a page's machine-dependent memory attributes. Add full support for these functions on amd64 and i386 and stubs for them on the other architectures. The function pmap_page_set_memattr() is also responsible for any other machine-dependent aspects of changing a page's memory attributes, such as flushing the cache or updating the direct map. The uses include kmem_alloc_contig(), vm_page_alloc(), and the device pager: kmem_alloc_contig() can now be used to allocate kernel memory with non-default memory attributes on amd64 and i386. vm_page_alloc() and the device pager will set the memory attributes for the real or fictitious page according to the object's default memory attributes. Update the various pmap functions on amd64 and i386 that map pages to incorporate each page's memory attributes in the mapping. Notes: (1) Inherent to this design are safety features that prevent the specification of inconsistent memory attributes by different mappings on amd64 and i386. In addition, the device pager provides a warning when a device driver creates a fictitious page with memory attributes that are inconsistent with the real page that the fictitious page is an alias for. (2) Storing the machine-dependent memory attributes for amd64 and i386 as a dedicated "int" in "struct md_page" represents a compromise between space efficiency and the ease of MFCing these changes to RELENG_7. In collaboration with: jhb Approved by: re (kib)
2009-07-12 23:31:20 +00:00
void pmap_page_set_memattr(vm_page_t m, vm_memattr_t ma);
2002-03-20 05:48:58 +00:00
void pmap_unmapdev(vm_offset_t, vm_size_t);
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
void pmap_invalidate_page(pmap_t, vm_offset_t);
void pmap_invalidate_range(pmap_t, vm_offset_t, vm_offset_t);
void pmap_invalidate_all(pmap_t);
void pmap_invalidate_cache(void);
#endif /* _KERNEL */
#endif /* !LOCORE */
1993-06-12 14:58:17 +00:00
#endif /* !_MACHINE_PMAP_H_ */