freebsd-skq/sys/netinet6/ip6_mroute.c

1951 lines
49 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
2007-12-10 16:03:40 +00:00
*
* $KAME: ip6_mroute.c,v 1.58 2001/12/18 02:36:31 itojun Exp $
*/
/*-
* Copyright (c) 1989 Stephen Deering
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Stephen Deering of Stanford University.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
2007-12-10 16:03:40 +00:00
* @(#)ip_mroute.c 8.2 (Berkeley) 11/15/93
* BSDI ip_mroute.c,v 2.10 1996/11/14 00:29:52 jch Exp
*/
/*
* IP multicast forwarding procedures
*
* Written by David Waitzman, BBN Labs, August 1988.
* Modified by Steve Deering, Stanford, February 1989.
* Modified by Mark J. Steiglitz, Stanford, May, 1991
* Modified by Van Jacobson, LBL, January 1993
* Modified by Ajit Thyagarajan, PARC, August 1993
* Modified by Bill Fenner, PARC, April 1994
*
* MROUTING Revision: 3.5.1.2 + PIM-SMv2 (pimd) Support
*/
2007-12-10 16:03:40 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet6.h"
#include <sys/param.h>
#include <sys/callout.h>
#include <sys/errno.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
#include <sys/module.h>
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
#include <sys/domain.h>
#include <sys/protosw.h>
#include <sys/sdt.h>
#include <sys/signalvar.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sockio.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/systm.h>
#include <sys/time.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_types.h>
#include <net/vnet.h>
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/icmp6.h>
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
#include <netinet/ip_encap.h>
#include <netinet/ip6.h>
#include <netinet/in_kdtrace.h>
#include <netinet6/ip6_var.h>
#include <netinet6/scope6_var.h>
#include <netinet6/nd6.h>
#include <netinet6/ip6_mroute.h>
#include <netinet6/pim6.h>
#include <netinet6/pim6_var.h>
static MALLOC_DEFINE(M_MRTABLE6, "mf6c", "multicast forwarding cache entry");
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static int ip6_mdq(struct mbuf *, struct ifnet *, struct mf6c *);
static void phyint_send(struct ip6_hdr *, struct mif6 *, struct mbuf *);
static int register_send(struct ip6_hdr *, struct mif6 *, struct mbuf *);
static int set_pim6(int *);
static int socket_send(struct socket *, struct mbuf *,
struct sockaddr_in6 *);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
extern int in6_mcast_loop;
extern struct domain inet6domain;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static const struct encaptab *pim6_encap_cookie;
static int pim6_encapcheck(const struct mbuf *, int, int, void *);
Rework IP encapsulation handling code. Currently it has several disadvantages: - it uses single mutex to protect internal structures. It is used by data- and control- path, thus there are no parallelism at all. - it uses single list to keep encap handlers for both INET and INET6 families. - struct encaptab keeps unneeded information (src, dst, masks, protosw), that isn't used by code in the source tree. - matches are prioritized and when many tunneling interfaces are registered, encapcheck handler of each interface is invoked for each packet. The search takes O(n) for n interfaces. All this work is done with exclusive lock held. What this patch includes: - the datapath is converted to be lockless using epoch(9) KPI. - struct encaptab now linked using CK_LIST. - all unused fields removed from struct encaptab. Several new fields addedr: min_length is the minimum packet length, that encapsulation handler expects to see; exact_match is maximum number of bits, that can return an encapsulation handler, when it wants to consume a packet. - IPv6 and IPv4 handlers are stored in separate lists; - added new "encap_lookup_t" method, that will be used later. It is targeted to speedup lookup of needed interface, when gif(4)/gre(4) have many interfaces. - the need to use protosw structure is eliminated. The only pr_input method was used from this structure, so I don't see the need to keep using it. - encap_input_t method changed to avoid using mbuf tags to store softc pointer. Now it is passed directly trough encap_input_t method. encap_getarg() funtions is removed. - all sockaddr structures and code that uses them removed. We don't have any code in the tree that uses them. All consumers use encap_attach_func() method, that relies on invoking of encapcheck() to determine the needed handler. - introduced struct encap_config, it contains parameters of encap handler that is going to be registered by encap_attach() function. - encap handlers are stored in lists ordered by exact_match value, thus handlers that need more bits to match will be checked first, and if encapcheck method returns exact_match value, the search will be stopped. - all current consumers changed to use new KPI. Reviewed by: mmacy Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D15617
2018-06-05 20:51:01 +00:00
static int pim6_input(struct mbuf *, int, int, void *);
static const struct encap_config ipv6_encap_cfg = {
.proto = IPPROTO_PIM,
.min_length = sizeof(struct ip6_hdr) + PIM_MINLEN,
.exact_match = 8,
.check = pim6_encapcheck,
.input = pim6_input
};
VNET_DEFINE_STATIC(int, ip6_mrouter_ver) = 0;
#define V_ip6_mrouter_ver VNET(ip6_mrouter_ver)
SYSCTL_DECL(_net_inet6);
SYSCTL_DECL(_net_inet6_ip6);
static SYSCTL_NODE(_net_inet6, IPPROTO_PIM, pim, CTLFLAG_RW, 0, "PIM");
static struct mrt6stat mrt6stat;
SYSCTL_STRUCT(_net_inet6_ip6, OID_AUTO, mrt6stat, CTLFLAG_RW,
&mrt6stat, mrt6stat,
"Multicast Routing Statistics (struct mrt6stat, netinet6/ip6_mroute.h)");
#define MRT6STAT_INC(name) mrt6stat.name += 1
#define NO_RTE_FOUND 0x1
#define RTE_FOUND 0x2
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static struct mtx mrouter6_mtx;
#define MROUTER6_LOCK() mtx_lock(&mrouter6_mtx)
#define MROUTER6_UNLOCK() mtx_unlock(&mrouter6_mtx)
#define MROUTER6_LOCK_ASSERT() do { \
mtx_assert(&mrouter6_mtx, MA_OWNED); \
NET_ASSERT_GIANT(); \
} while (0)
#define MROUTER6_LOCK_INIT() \
mtx_init(&mrouter6_mtx, "IPv6 multicast forwarding", NULL, MTX_DEF)
#define MROUTER6_LOCK_DESTROY() mtx_destroy(&mrouter6_mtx)
static struct mf6c *mf6ctable[MF6CTBLSIZ];
SYSCTL_OPAQUE(_net_inet6_ip6, OID_AUTO, mf6ctable, CTLFLAG_RD,
&mf6ctable, sizeof(mf6ctable), "S,*mf6ctable[MF6CTBLSIZ]",
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
"IPv6 Multicast Forwarding Table (struct *mf6ctable[MF6CTBLSIZ], "
"netinet6/ip6_mroute.h)");
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static struct mtx mfc6_mtx;
#define MFC6_LOCK() mtx_lock(&mfc6_mtx)
#define MFC6_UNLOCK() mtx_unlock(&mfc6_mtx)
#define MFC6_LOCK_ASSERT() do { \
mtx_assert(&mfc6_mtx, MA_OWNED); \
NET_ASSERT_GIANT(); \
} while (0)
#define MFC6_LOCK_INIT() \
mtx_init(&mfc6_mtx, "IPv6 multicast forwarding cache", NULL, MTX_DEF)
#define MFC6_LOCK_DESTROY() mtx_destroy(&mfc6_mtx)
static u_char n6expire[MF6CTBLSIZ];
static struct mif6 mif6table[MAXMIFS];
static int
sysctl_mif6table(SYSCTL_HANDLER_ARGS)
{
struct mif6_sctl *out;
int error;
out = malloc(sizeof(struct mif6_sctl) * MAXMIFS, M_TEMP,
M_WAITOK | M_ZERO);
for (int i = 0; i < MAXMIFS; i++) {
out[i].m6_flags = mif6table[i].m6_flags;
out[i].m6_rate_limit = mif6table[i].m6_rate_limit;
out[i].m6_lcl_addr = mif6table[i].m6_lcl_addr;
if (mif6table[i].m6_ifp != NULL)
out[i].m6_ifp = mif6table[i].m6_ifp->if_index;
else
out[i].m6_ifp = 0;
out[i].m6_pkt_in = mif6table[i].m6_pkt_in;
out[i].m6_pkt_out = mif6table[i].m6_pkt_out;
out[i].m6_bytes_in = mif6table[i].m6_bytes_in;
out[i].m6_bytes_out = mif6table[i].m6_bytes_out;
}
error = SYSCTL_OUT(req, out, sizeof(struct mif6_sctl) * MAXMIFS);
free(out, M_TEMP);
return (error);
}
SYSCTL_PROC(_net_inet6_ip6, OID_AUTO, mif6table, CTLTYPE_OPAQUE | CTLFLAG_RD,
NULL, 0, sysctl_mif6table, "S,mif6_sctl[MAXMIFS]",
"IPv6 Multicast Interfaces (struct mif6_sctl[MAXMIFS], "
"netinet6/ip6_mroute.h)");
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static struct mtx mif6_mtx;
#define MIF6_LOCK() mtx_lock(&mif6_mtx)
#define MIF6_UNLOCK() mtx_unlock(&mif6_mtx)
#define MIF6_LOCK_ASSERT() mtx_assert(&mif6_mtx, MA_OWNED)
#define MIF6_LOCK_INIT() \
mtx_init(&mif6_mtx, "IPv6 multicast interfaces", NULL, MTX_DEF)
#define MIF6_LOCK_DESTROY() mtx_destroy(&mif6_mtx)
#ifdef MRT6DEBUG
VNET_DEFINE_STATIC(u_int, mrt6debug) = 0; /* debug level */
#define V_mrt6debug VNET(mrt6debug)
#define DEBUG_MFC 0x02
#define DEBUG_FORWARD 0x04
#define DEBUG_EXPIRE 0x08
#define DEBUG_XMIT 0x10
#define DEBUG_REG 0x20
#define DEBUG_PIM 0x40
#define DEBUG_ERR 0x80
#define DEBUG_ANY 0x7f
#define MRT6_DLOG(m, fmt, ...) \
if (V_mrt6debug & (m)) \
log(((m) & DEBUG_ERR) ? LOG_ERR: LOG_DEBUG, \
"%s: " fmt "\n", __func__, ##__VA_ARGS__)
#else
#define MRT6_DLOG(m, fmt, ...)
#endif
2008-01-08 19:08:58 +00:00
static void expire_upcalls(void *);
#define EXPIRE_TIMEOUT (hz / 4) /* 4x / second */
#define UPCALL_EXPIRE 6 /* number of timeouts */
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
/*
* XXX TODO: maintain a count to if_allmulti() calls in struct ifnet.
*/
/*
* 'Interfaces' associated with decapsulator (so we can tell
* packets that went through it from ones that get reflected
* by a broken gateway). Different from IPv4 register_if,
* these interfaces are linked into the system ifnet list,
* because per-interface IPv6 statistics are maintained in
* ifp->if_afdata. But it does not have any routes point
* to them. I.e., packets can't be sent this way. They
* only exist as a placeholder for multicast source
* verification.
*/
static struct ifnet *multicast_register_if6;
#define ENCAP_HOPS 64
/*
* Private variables.
*/
static mifi_t nummifs = 0;
static mifi_t reg_mif_num = (mifi_t)-1;
static struct pim6stat pim6stat;
SYSCTL_STRUCT(_net_inet6_pim, PIM6CTL_STATS, stats, CTLFLAG_RW,
&pim6stat, pim6stat,
"PIM Statistics (struct pim6stat, netinet6/pim6_var.h)");
#define PIM6STAT_INC(name) pim6stat.name += 1
VNET_DEFINE_STATIC(int, pim6);
#define V_pim6 VNET(pim6)
/*
* Hash function for a source, group entry
*/
#define MF6CHASH(a, g) MF6CHASHMOD((a).s6_addr32[0] ^ (a).s6_addr32[1] ^ \
(a).s6_addr32[2] ^ (a).s6_addr32[3] ^ \
(g).s6_addr32[0] ^ (g).s6_addr32[1] ^ \
(g).s6_addr32[2] ^ (g).s6_addr32[3])
/*
* Find a route for a given origin IPv6 address and Multicast group address.
*/
#define MF6CFIND(o, g, rt) do { \
struct mf6c *_rt = mf6ctable[MF6CHASH(o,g)]; \
rt = NULL; \
while (_rt) { \
if (IN6_ARE_ADDR_EQUAL(&_rt->mf6c_origin.sin6_addr, &(o)) && \
IN6_ARE_ADDR_EQUAL(&_rt->mf6c_mcastgrp.sin6_addr, &(g)) && \
(_rt->mf6c_stall == NULL)) { \
rt = _rt; \
break; \
} \
_rt = _rt->mf6c_next; \
} \
if (rt == NULL) { \
MRT6STAT_INC(mrt6s_mfc_misses); \
} \
} while (/*CONSTCOND*/ 0)
/*
* Macros to compute elapsed time efficiently
* Borrowed from Van Jacobson's scheduling code
* XXX: replace with timersub() ?
*/
#define TV_DELTA(a, b, delta) do { \
int xxs; \
\
delta = (a).tv_usec - (b).tv_usec; \
if ((xxs = (a).tv_sec - (b).tv_sec)) { \
switch (xxs) { \
case 2: \
delta += 1000000; \
/* FALLTHROUGH */ \
case 1: \
delta += 1000000; \
break; \
default: \
delta += (1000000 * xxs); \
} \
} \
} while (/*CONSTCOND*/ 0)
/* XXX: replace with timercmp(a, b, <) ? */
#define TV_LT(a, b) (((a).tv_usec < (b).tv_usec && \
(a).tv_sec <= (b).tv_sec) || (a).tv_sec < (b).tv_sec)
#ifdef UPCALL_TIMING
#define UPCALL_MAX 50
static u_long upcall_data[UPCALL_MAX + 1];
static void collate();
#endif /* UPCALL_TIMING */
2008-01-08 19:08:58 +00:00
static int ip6_mrouter_init(struct socket *, int, int);
static int add_m6fc(struct mf6cctl *);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static int add_m6if(struct mif6ctl *);
2008-01-08 19:08:58 +00:00
static int del_m6fc(struct mf6cctl *);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static int del_m6if(mifi_t *);
static int del_m6if_locked(mifi_t *);
static int get_mif6_cnt(struct sioc_mif_req6 *);
static int get_sg_cnt(struct sioc_sg_req6 *);
static struct callout expire_upcalls_ch;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
int X_ip6_mforward(struct ip6_hdr *, struct ifnet *, struct mbuf *);
int X_ip6_mrouter_done(void);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
int X_ip6_mrouter_set(struct socket *, struct sockopt *);
int X_ip6_mrouter_get(struct socket *, struct sockopt *);
int X_mrt6_ioctl(u_long, caddr_t);
/*
* Handle MRT setsockopt commands to modify the multicast routing tables.
*/
int
X_ip6_mrouter_set(struct socket *so, struct sockopt *sopt)
{
int error = 0;
int optval;
struct mif6ctl mifc;
struct mf6cctl mfcc;
mifi_t mifi;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (so != V_ip6_mrouter && sopt->sopt_name != MRT6_INIT)
return (EPERM);
switch (sopt->sopt_name) {
case MRT6_INIT:
#ifdef MRT6_OINIT
case MRT6_OINIT:
#endif
error = sooptcopyin(sopt, &optval, sizeof(optval),
sizeof(optval));
if (error)
break;
error = ip6_mrouter_init(so, optval, sopt->sopt_name);
break;
case MRT6_DONE:
error = X_ip6_mrouter_done();
break;
case MRT6_ADD_MIF:
error = sooptcopyin(sopt, &mifc, sizeof(mifc), sizeof(mifc));
if (error)
break;
error = add_m6if(&mifc);
break;
case MRT6_ADD_MFC:
error = sooptcopyin(sopt, &mfcc, sizeof(mfcc), sizeof(mfcc));
if (error)
break;
error = add_m6fc(&mfcc);
break;
case MRT6_DEL_MFC:
error = sooptcopyin(sopt, &mfcc, sizeof(mfcc), sizeof(mfcc));
if (error)
break;
error = del_m6fc(&mfcc);
break;
case MRT6_DEL_MIF:
error = sooptcopyin(sopt, &mifi, sizeof(mifi), sizeof(mifi));
if (error)
break;
error = del_m6if(&mifi);
break;
case MRT6_PIM:
error = sooptcopyin(sopt, &optval, sizeof(optval),
sizeof(optval));
if (error)
break;
error = set_pim6(&optval);
break;
default:
error = EOPNOTSUPP;
break;
}
return (error);
}
/*
* Handle MRT getsockopt commands
*/
int
X_ip6_mrouter_get(struct socket *so, struct sockopt *sopt)
{
int error = 0;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (so != V_ip6_mrouter)
return (EACCES);
switch (sopt->sopt_name) {
case MRT6_PIM:
error = sooptcopyout(sopt, &V_pim6, sizeof(V_pim6));
break;
}
return (error);
}
/*
* Handle ioctl commands to obtain information from the cache
*/
int
X_mrt6_ioctl(u_long cmd, caddr_t data)
{
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
int ret;
ret = EINVAL;
switch (cmd) {
case SIOCGETSGCNT_IN6:
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
ret = get_sg_cnt((struct sioc_sg_req6 *)data);
break;
case SIOCGETMIFCNT_IN6:
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
ret = get_mif6_cnt((struct sioc_mif_req6 *)data);
break;
default:
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
break;
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
return (ret);
}
/*
* returns the packet, byte, rpf-failure count for the source group provided
*/
static int
get_sg_cnt(struct sioc_sg_req6 *req)
{
struct mf6c *rt;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
int ret;
ret = 0;
MFC6_LOCK();
MF6CFIND(req->src.sin6_addr, req->grp.sin6_addr, rt);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
if (rt == NULL) {
ret = ESRCH;
} else {
req->pktcnt = rt->mf6c_pkt_cnt;
req->bytecnt = rt->mf6c_byte_cnt;
req->wrong_if = rt->mf6c_wrong_if;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (ret);
}
/*
* returns the input and output packet and byte counts on the mif provided
*/
static int
get_mif6_cnt(struct sioc_mif_req6 *req)
{
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
mifi_t mifi;
int ret;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
ret = 0;
mifi = req->mifi;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MIF6_LOCK();
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
if (mifi >= nummifs) {
ret = EINVAL;
} else {
req->icount = mif6table[mifi].m6_pkt_in;
req->ocount = mif6table[mifi].m6_pkt_out;
req->ibytes = mif6table[mifi].m6_bytes_in;
req->obytes = mif6table[mifi].m6_bytes_out;
}
MIF6_UNLOCK();
return (ret);
}
static int
set_pim6(int *i)
{
if ((*i != 1) && (*i != 0))
return (EINVAL);
V_pim6 = *i;
return (0);
}
/*
* Enable multicast routing
*/
static int
ip6_mrouter_init(struct socket *so, int v, int cmd)
{
MRT6_DLOG(DEBUG_ANY, "so_type = %d, pr_protocol = %d",
so->so_type, so->so_proto->pr_protocol);
if (so->so_type != SOCK_RAW ||
so->so_proto->pr_protocol != IPPROTO_ICMPV6)
return (EOPNOTSUPP);
if (v != 1)
return (ENOPROTOOPT);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MROUTER6_LOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (V_ip6_mrouter != NULL) {
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MROUTER6_UNLOCK();
return (EADDRINUSE);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
V_ip6_mrouter = so;
V_ip6_mrouter_ver = cmd;
bzero((caddr_t)mf6ctable, sizeof(mf6ctable));
bzero((caddr_t)n6expire, sizeof(n6expire));
V_pim6 = 0;/* used for stubbing out/in pim stuff */
callout_init(&expire_upcalls_ch, 0);
callout_reset(&expire_upcalls_ch, EXPIRE_TIMEOUT,
expire_upcalls, NULL);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MROUTER6_UNLOCK();
MRT6_DLOG(DEBUG_ANY, "finished");
return (0);
}
/*
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
* Disable IPv6 multicast forwarding.
*/
int
X_ip6_mrouter_done(void)
{
mifi_t mifi;
u_long i;
struct mf6c *rt;
struct rtdetq *rte;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MROUTER6_LOCK();
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (V_ip6_mrouter == NULL) {
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MROUTER6_UNLOCK();
return (EINVAL);
}
/*
* For each phyint in use, disable promiscuous reception of all IPv6
* multicasts.
*/
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
for (mifi = 0; mifi < nummifs; mifi++) {
if (mif6table[mifi].m6_ifp &&
!(mif6table[mifi].m6_flags & MIFF_REGISTER)) {
if_allmulti(mif6table[mifi].m6_ifp, 0);
}
}
bzero((caddr_t)mif6table, sizeof(mif6table));
nummifs = 0;
V_pim6 = 0; /* used to stub out/in pim specific code */
callout_stop(&expire_upcalls_ch);
/*
* Free all multicast forwarding cache entries.
*/
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_LOCK();
for (i = 0; i < MF6CTBLSIZ; i++) {
rt = mf6ctable[i];
while (rt) {
struct mf6c *frt;
for (rte = rt->mf6c_stall; rte != NULL; ) {
struct rtdetq *n = rte->next;
m_freem(rte->m);
free(rte, M_MRTABLE6);
rte = n;
}
frt = rt;
rt = rt->mf6c_next;
free(frt, M_MRTABLE6);
}
}
bzero((caddr_t)mf6ctable, sizeof(mf6ctable));
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
/*
* Reset register interface
*/
if (reg_mif_num != (mifi_t)-1 && multicast_register_if6 != NULL) {
if_detach(multicast_register_if6);
if_free(multicast_register_if6);
reg_mif_num = (mifi_t)-1;
multicast_register_if6 = NULL;
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
V_ip6_mrouter = NULL;
V_ip6_mrouter_ver = 0;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MROUTER6_UNLOCK();
MRT6_DLOG(DEBUG_ANY, "finished");
return (0);
}
static struct sockaddr_in6 sin6 = { sizeof(sin6), AF_INET6 };
/*
* Add a mif to the mif table
*/
static int
add_m6if(struct mif6ctl *mifcp)
{
struct mif6 *mifp;
struct ifnet *ifp;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
int error;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MIF6_LOCK();
if (mifcp->mif6c_mifi >= MAXMIFS) {
MIF6_UNLOCK();
return (EINVAL);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
}
mifp = mif6table + mifcp->mif6c_mifi;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
if (mifp->m6_ifp != NULL) {
MIF6_UNLOCK();
return (EADDRINUSE); /* XXX: is it appropriate? */
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
}
if (mifcp->mif6c_pifi == 0 || mifcp->mif6c_pifi > V_if_index) {
MIF6_UNLOCK();
return (ENXIO);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
}
ifp = ifnet_byindex(mifcp->mif6c_pifi);
if (mifcp->mif6c_flags & MIFF_REGISTER) {
if (reg_mif_num == (mifi_t)-1) {
ifp = if_alloc(IFT_OTHER);
if_initname(ifp, "register_mif", 0);
ifp->if_flags |= IFF_LOOPBACK;
if_attach(ifp);
multicast_register_if6 = ifp;
reg_mif_num = mifcp->mif6c_mifi;
/*
* it is impossible to guess the ifindex of the
* register interface. So mif6c_pifi is automatically
* calculated.
*/
mifcp->mif6c_pifi = ifp->if_index;
} else {
ifp = multicast_register_if6;
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
} else {
/* Make sure the interface supports multicast */
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
if ((ifp->if_flags & IFF_MULTICAST) == 0) {
MIF6_UNLOCK();
return (EOPNOTSUPP);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
}
error = if_allmulti(ifp, 1);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
if (error) {
MIF6_UNLOCK();
return (error);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
}
}
mifp->m6_flags = mifcp->mif6c_flags;
mifp->m6_ifp = ifp;
/* initialize per mif pkt counters */
mifp->m6_pkt_in = 0;
mifp->m6_pkt_out = 0;
mifp->m6_bytes_in = 0;
mifp->m6_bytes_out = 0;
/* Adjust nummifs up if the mifi is higher than nummifs */
if (nummifs <= mifcp->mif6c_mifi)
nummifs = mifcp->mif6c_mifi + 1;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MIF6_UNLOCK();
MRT6_DLOG(DEBUG_ANY, "mif #%d, phyint %s", mifcp->mif6c_mifi,
if_name(ifp));
return (0);
}
/*
* Delete a mif from the mif table
*/
static int
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
del_m6if_locked(mifi_t *mifip)
{
struct mif6 *mifp = mif6table + *mifip;
mifi_t mifi;
struct ifnet *ifp;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MIF6_LOCK_ASSERT();
if (*mifip >= nummifs)
return (EINVAL);
if (mifp->m6_ifp == NULL)
return (EINVAL);
if (!(mifp->m6_flags & MIFF_REGISTER)) {
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
/* XXX: TODO: Maintain an ALLMULTI refcount in struct ifnet. */
ifp = mifp->m6_ifp;
if_allmulti(ifp, 0);
} else {
if (reg_mif_num != (mifi_t)-1 &&
multicast_register_if6 != NULL) {
if_detach(multicast_register_if6);
if_free(multicast_register_if6);
reg_mif_num = (mifi_t)-1;
multicast_register_if6 = NULL;
}
}
bzero((caddr_t)mifp, sizeof(*mifp));
/* Adjust nummifs down */
for (mifi = nummifs; mifi > 0; mifi--)
if (mif6table[mifi - 1].m6_ifp)
break;
nummifs = mifi;
MRT6_DLOG(DEBUG_ANY, "mif %d, nummifs %d", *mifip, nummifs);
return (0);
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static int
del_m6if(mifi_t *mifip)
{
int cc;
MIF6_LOCK();
cc = del_m6if_locked(mifip);
MIF6_UNLOCK();
return (cc);
}
/*
* Add an mfc entry
*/
static int
add_m6fc(struct mf6cctl *mfccp)
{
struct mf6c *rt;
u_long hash;
struct rtdetq *rte;
u_short nstl;
char ip6bufo[INET6_ADDRSTRLEN], ip6bufg[INET6_ADDRSTRLEN];
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_LOCK();
MF6CFIND(mfccp->mf6cc_origin.sin6_addr,
mfccp->mf6cc_mcastgrp.sin6_addr, rt);
/* If an entry already exists, just update the fields */
if (rt) {
MRT6_DLOG(DEBUG_MFC, "no upcall o %s g %s p %x",
ip6_sprintf(ip6bufo, &mfccp->mf6cc_origin.sin6_addr),
ip6_sprintf(ip6bufg, &mfccp->mf6cc_mcastgrp.sin6_addr),
mfccp->mf6cc_parent);
rt->mf6c_parent = mfccp->mf6cc_parent;
rt->mf6c_ifset = mfccp->mf6cc_ifset;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (0);
}
/*
* Find the entry for which the upcall was made and update
*/
hash = MF6CHASH(mfccp->mf6cc_origin.sin6_addr,
mfccp->mf6cc_mcastgrp.sin6_addr);
for (rt = mf6ctable[hash], nstl = 0; rt; rt = rt->mf6c_next) {
if (IN6_ARE_ADDR_EQUAL(&rt->mf6c_origin.sin6_addr,
&mfccp->mf6cc_origin.sin6_addr) &&
IN6_ARE_ADDR_EQUAL(&rt->mf6c_mcastgrp.sin6_addr,
&mfccp->mf6cc_mcastgrp.sin6_addr) &&
(rt->mf6c_stall != NULL)) {
if (nstl++)
log(LOG_ERR,
"add_m6fc: %s o %s g %s p %x dbx %p\n",
"multiple kernel entries",
ip6_sprintf(ip6bufo,
&mfccp->mf6cc_origin.sin6_addr),
ip6_sprintf(ip6bufg,
&mfccp->mf6cc_mcastgrp.sin6_addr),
mfccp->mf6cc_parent, rt->mf6c_stall);
MRT6_DLOG(DEBUG_MFC, "o %s g %s p %x dbg %p",
ip6_sprintf(ip6bufo,
&mfccp->mf6cc_origin.sin6_addr),
ip6_sprintf(ip6bufg,
&mfccp->mf6cc_mcastgrp.sin6_addr),
mfccp->mf6cc_parent, rt->mf6c_stall);
rt->mf6c_origin = mfccp->mf6cc_origin;
rt->mf6c_mcastgrp = mfccp->mf6cc_mcastgrp;
rt->mf6c_parent = mfccp->mf6cc_parent;
rt->mf6c_ifset = mfccp->mf6cc_ifset;
/* initialize pkt counters per src-grp */
rt->mf6c_pkt_cnt = 0;
rt->mf6c_byte_cnt = 0;
rt->mf6c_wrong_if = 0;
rt->mf6c_expire = 0; /* Don't clean this guy up */
n6expire[hash]--;
/* free packets Qed at the end of this entry */
for (rte = rt->mf6c_stall; rte != NULL; ) {
struct rtdetq *n = rte->next;
ip6_mdq(rte->m, rte->ifp, rt);
m_freem(rte->m);
#ifdef UPCALL_TIMING
collate(&(rte->t));
#endif /* UPCALL_TIMING */
free(rte, M_MRTABLE6);
rte = n;
}
rt->mf6c_stall = NULL;
}
}
/*
* It is possible that an entry is being inserted without an upcall
*/
if (nstl == 0) {
MRT6_DLOG(DEBUG_MFC, "no upcall h %lu o %s g %s p %x", hash,
ip6_sprintf(ip6bufo, &mfccp->mf6cc_origin.sin6_addr),
ip6_sprintf(ip6bufg, &mfccp->mf6cc_mcastgrp.sin6_addr),
mfccp->mf6cc_parent);
for (rt = mf6ctable[hash]; rt; rt = rt->mf6c_next) {
if (IN6_ARE_ADDR_EQUAL(&rt->mf6c_origin.sin6_addr,
&mfccp->mf6cc_origin.sin6_addr)&&
IN6_ARE_ADDR_EQUAL(&rt->mf6c_mcastgrp.sin6_addr,
&mfccp->mf6cc_mcastgrp.sin6_addr)) {
rt->mf6c_origin = mfccp->mf6cc_origin;
rt->mf6c_mcastgrp = mfccp->mf6cc_mcastgrp;
rt->mf6c_parent = mfccp->mf6cc_parent;
rt->mf6c_ifset = mfccp->mf6cc_ifset;
/* initialize pkt counters per src-grp */
rt->mf6c_pkt_cnt = 0;
rt->mf6c_byte_cnt = 0;
rt->mf6c_wrong_if = 0;
if (rt->mf6c_expire)
n6expire[hash]--;
rt->mf6c_expire = 0;
}
}
if (rt == NULL) {
/* no upcall, so make a new entry */
rt = (struct mf6c *)malloc(sizeof(*rt), M_MRTABLE6,
M_NOWAIT);
if (rt == NULL) {
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (ENOBUFS);
}
/* insert new entry at head of hash chain */
rt->mf6c_origin = mfccp->mf6cc_origin;
rt->mf6c_mcastgrp = mfccp->mf6cc_mcastgrp;
rt->mf6c_parent = mfccp->mf6cc_parent;
rt->mf6c_ifset = mfccp->mf6cc_ifset;
/* initialize pkt counters per src-grp */
rt->mf6c_pkt_cnt = 0;
rt->mf6c_byte_cnt = 0;
rt->mf6c_wrong_if = 0;
rt->mf6c_expire = 0;
rt->mf6c_stall = NULL;
/* link into table */
rt->mf6c_next = mf6ctable[hash];
mf6ctable[hash] = rt;
}
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (0);
}
#ifdef UPCALL_TIMING
/*
* collect delay statistics on the upcalls
*/
static void
collate(struct timeval *t)
{
u_long d;
struct timeval tp;
u_long delta;
GET_TIME(tp);
if (TV_LT(*t, tp))
{
TV_DELTA(tp, *t, delta);
d = delta >> 10;
if (d > UPCALL_MAX)
d = UPCALL_MAX;
++upcall_data[d];
}
}
#endif /* UPCALL_TIMING */
/*
* Delete an mfc entry
*/
static int
del_m6fc(struct mf6cctl *mfccp)
{
#ifdef MRT6DEBUG
char ip6bufo[INET6_ADDRSTRLEN], ip6bufg[INET6_ADDRSTRLEN];
#endif
struct sockaddr_in6 origin;
struct sockaddr_in6 mcastgrp;
struct mf6c *rt;
struct mf6c **nptr;
u_long hash;
origin = mfccp->mf6cc_origin;
mcastgrp = mfccp->mf6cc_mcastgrp;
hash = MF6CHASH(origin.sin6_addr, mcastgrp.sin6_addr);
MRT6_DLOG(DEBUG_MFC, "orig %s mcastgrp %s",
ip6_sprintf(ip6bufo, &origin.sin6_addr),
ip6_sprintf(ip6bufg, &mcastgrp.sin6_addr));
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_LOCK();
nptr = &mf6ctable[hash];
while ((rt = *nptr) != NULL) {
if (IN6_ARE_ADDR_EQUAL(&origin.sin6_addr,
&rt->mf6c_origin.sin6_addr) &&
IN6_ARE_ADDR_EQUAL(&mcastgrp.sin6_addr,
&rt->mf6c_mcastgrp.sin6_addr) &&
rt->mf6c_stall == NULL)
break;
nptr = &rt->mf6c_next;
}
if (rt == NULL) {
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (EADDRNOTAVAIL);
}
*nptr = rt->mf6c_next;
free(rt, M_MRTABLE6);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (0);
}
static int
socket_send(struct socket *s, struct mbuf *mm, struct sockaddr_in6 *src)
{
if (s) {
if (sbappendaddr(&s->so_rcv,
(struct sockaddr *)src,
mm, (struct mbuf *)0) != 0) {
sorwakeup(s);
return (0);
}
}
m_freem(mm);
return (-1);
}
/*
* IPv6 multicast forwarding function. This function assumes that the packet
* pointed to by "ip6" has arrived on (or is about to be sent to) the interface
* pointed to by "ifp", and the packet is to be relayed to other networks
* that have members of the packet's destination IPv6 multicast group.
*
* The packet is returned unscathed to the caller, unless it is
* erroneous, in which case a non-zero return value tells the caller to
* discard it.
*
* NOTE: this implementation assumes that m->m_pkthdr.rcvif is NULL iff
* this function is called in the originating context (i.e., not when
* forwarding a packet from other node). ip6_output(), which is currently the
* only function that calls this function is called in the originating context,
* explicitly ensures this condition. It is caller's responsibility to ensure
* that if this function is called from somewhere else in the originating
* context in the future.
*/
int
X_ip6_mforward(struct ip6_hdr *ip6, struct ifnet *ifp, struct mbuf *m)
{
struct rtdetq *rte;
struct mbuf *mb0;
struct mf6c *rt;
struct mif6 *mifp;
struct mbuf *mm;
u_long hash;
mifi_t mifi;
char ip6bufs[INET6_ADDRSTRLEN], ip6bufd[INET6_ADDRSTRLEN];
#ifdef UPCALL_TIMING
struct timeval tp;
GET_TIME(tp);
#endif /* UPCALL_TIMING */
MRT6_DLOG(DEBUG_FORWARD, "src %s, dst %s, ifindex %d",
ip6_sprintf(ip6bufs, &ip6->ip6_src),
ip6_sprintf(ip6bufd, &ip6->ip6_dst), ifp->if_index);
/*
* Don't forward a packet with Hop limit of zero or one,
* or a packet destined to a local-only group.
*/
if (ip6->ip6_hlim <= 1 || IN6_IS_ADDR_MC_INTFACELOCAL(&ip6->ip6_dst) ||
IN6_IS_ADDR_MC_LINKLOCAL(&ip6->ip6_dst))
return (0);
ip6->ip6_hlim--;
/*
* Source address check: do not forward packets with unspecified
* source. It was discussed in July 2000, on ipngwg mailing list.
* This is rather more serious than unicast cases, because some
* MLD packets can be sent with the unspecified source address
* (although such packets must normally set 1 to the hop limit field).
*/
if (IN6_IS_ADDR_UNSPECIFIED(&ip6->ip6_src)) {
IP6STAT_INC(ip6s_cantforward);
if (V_ip6_log_time + V_ip6_log_interval < time_uptime) {
V_ip6_log_time = time_uptime;
log(LOG_DEBUG,
"cannot forward "
"from %s to %s nxt %d received on %s\n",
ip6_sprintf(ip6bufs, &ip6->ip6_src),
ip6_sprintf(ip6bufd, &ip6->ip6_dst),
ip6->ip6_nxt,
if_name(m->m_pkthdr.rcvif));
}
return (0);
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_LOCK();
/*
* Determine forwarding mifs from the forwarding cache table
*/
MF6CFIND(ip6->ip6_src, ip6->ip6_dst, rt);
MRT6STAT_INC(mrt6s_mfc_lookups);
/* Entry exists, so forward if necessary */
if (rt) {
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (ip6_mdq(m, ifp, rt));
}
/*
* If we don't have a route for packet's origin,
* Make a copy of the packet & send message to routing daemon.
*/
MRT6STAT_INC(mrt6s_no_route);
MRT6_DLOG(DEBUG_FORWARD | DEBUG_MFC, "no rte s %s g %s",
ip6_sprintf(ip6bufs, &ip6->ip6_src),
ip6_sprintf(ip6bufd, &ip6->ip6_dst));
/*
* Allocate mbufs early so that we don't do extra work if we
* are just going to fail anyway.
*/
rte = (struct rtdetq *)malloc(sizeof(*rte), M_MRTABLE6, M_NOWAIT);
if (rte == NULL) {
MFC6_UNLOCK();
return (ENOBUFS);
}
mb0 = m_copym(m, 0, M_COPYALL, M_NOWAIT);
/*
* Pullup packet header if needed before storing it,
* as other references may modify it in the meantime.
*/
if (mb0 && (!M_WRITABLE(mb0) || mb0->m_len < sizeof(struct ip6_hdr)))
mb0 = m_pullup(mb0, sizeof(struct ip6_hdr));
if (mb0 == NULL) {
free(rte, M_MRTABLE6);
MFC6_UNLOCK();
return (ENOBUFS);
}
/* is there an upcall waiting for this packet? */
hash = MF6CHASH(ip6->ip6_src, ip6->ip6_dst);
for (rt = mf6ctable[hash]; rt; rt = rt->mf6c_next) {
if (IN6_ARE_ADDR_EQUAL(&ip6->ip6_src,
&rt->mf6c_origin.sin6_addr) &&
IN6_ARE_ADDR_EQUAL(&ip6->ip6_dst,
&rt->mf6c_mcastgrp.sin6_addr) && (rt->mf6c_stall != NULL))
break;
}
if (rt == NULL) {
struct mrt6msg *im;
#ifdef MRT6_OINIT
struct omrt6msg *oim;
#endif
/* no upcall, so make a new entry */
rt = (struct mf6c *)malloc(sizeof(*rt), M_MRTABLE6, M_NOWAIT);
if (rt == NULL) {
free(rte, M_MRTABLE6);
m_freem(mb0);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (ENOBUFS);
}
/*
* Make a copy of the header to send to the user
* level process
*/
mm = m_copym(mb0, 0, sizeof(struct ip6_hdr), M_NOWAIT);
if (mm == NULL) {
free(rte, M_MRTABLE6);
m_freem(mb0);
free(rt, M_MRTABLE6);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (ENOBUFS);
}
/*
* Send message to routing daemon
*/
sin6.sin6_addr = ip6->ip6_src;
im = NULL;
#ifdef MRT6_OINIT
oim = NULL;
#endif
switch (V_ip6_mrouter_ver) {
#ifdef MRT6_OINIT
case MRT6_OINIT:
oim = mtod(mm, struct omrt6msg *);
oim->im6_msgtype = MRT6MSG_NOCACHE;
oim->im6_mbz = 0;
break;
#endif
case MRT6_INIT:
im = mtod(mm, struct mrt6msg *);
im->im6_msgtype = MRT6MSG_NOCACHE;
im->im6_mbz = 0;
break;
default:
free(rte, M_MRTABLE6);
m_freem(mb0);
free(rt, M_MRTABLE6);
MFC6_UNLOCK();
return (EINVAL);
}
MRT6_DLOG(DEBUG_FORWARD, "getting the iif info in the kernel");
for (mifp = mif6table, mifi = 0;
mifi < nummifs && mifp->m6_ifp != ifp; mifp++, mifi++)
;
switch (V_ip6_mrouter_ver) {
#ifdef MRT6_OINIT
case MRT6_OINIT:
oim->im6_mif = mifi;
break;
#endif
case MRT6_INIT:
im->im6_mif = mifi;
break;
}
if (socket_send(V_ip6_mrouter, mm, &sin6) < 0) {
log(LOG_WARNING, "ip6_mforward: ip6_mrouter "
"socket queue full\n");
MRT6STAT_INC(mrt6s_upq_sockfull);
free(rte, M_MRTABLE6);
m_freem(mb0);
free(rt, M_MRTABLE6);
MFC6_UNLOCK();
return (ENOBUFS);
}
MRT6STAT_INC(mrt6s_upcalls);
/* insert new entry at head of hash chain */
bzero(rt, sizeof(*rt));
rt->mf6c_origin.sin6_family = AF_INET6;
rt->mf6c_origin.sin6_len = sizeof(struct sockaddr_in6);
rt->mf6c_origin.sin6_addr = ip6->ip6_src;
rt->mf6c_mcastgrp.sin6_family = AF_INET6;
rt->mf6c_mcastgrp.sin6_len = sizeof(struct sockaddr_in6);
rt->mf6c_mcastgrp.sin6_addr = ip6->ip6_dst;
rt->mf6c_expire = UPCALL_EXPIRE;
n6expire[hash]++;
rt->mf6c_parent = MF6C_INCOMPLETE_PARENT;
/* link into table */
rt->mf6c_next = mf6ctable[hash];
mf6ctable[hash] = rt;
/* Add this entry to the end of the queue */
rt->mf6c_stall = rte;
} else {
/* determine if q has overflowed */
struct rtdetq **p;
int npkts = 0;
for (p = &rt->mf6c_stall; *p != NULL; p = &(*p)->next)
if (++npkts > MAX_UPQ6) {
MRT6STAT_INC(mrt6s_upq_ovflw);
free(rte, M_MRTABLE6);
m_freem(mb0);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
return (0);
}
/* Add this entry to the end of the queue */
*p = rte;
}
rte->next = NULL;
rte->m = mb0;
rte->ifp = ifp;
#ifdef UPCALL_TIMING
rte->t = tp;
#endif /* UPCALL_TIMING */
MFC6_UNLOCK();
return (0);
}
/*
* Clean up cache entries if upcalls are not serviced
* Call from the Slow Timeout mechanism, every half second.
*/
static void
expire_upcalls(void *unused)
{
#ifdef MRT6DEBUG
char ip6bufo[INET6_ADDRSTRLEN], ip6bufg[INET6_ADDRSTRLEN];
#endif
struct rtdetq *rte;
struct mf6c *mfc, **nptr;
u_long i;
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_LOCK();
for (i = 0; i < MF6CTBLSIZ; i++) {
if (n6expire[i] == 0)
continue;
nptr = &mf6ctable[i];
while ((mfc = *nptr) != NULL) {
rte = mfc->mf6c_stall;
/*
* Skip real cache entries
* Make sure it wasn't marked to not expire (shouldn't happen)
* If it expires now
*/
if (rte != NULL &&
mfc->mf6c_expire != 0 &&
--mfc->mf6c_expire == 0) {
MRT6_DLOG(DEBUG_EXPIRE, "expiring (%s %s)",
ip6_sprintf(ip6bufo, &mfc->mf6c_origin.sin6_addr),
ip6_sprintf(ip6bufg, &mfc->mf6c_mcastgrp.sin6_addr));
/*
* drop all the packets
* free the mbuf with the pkt, if, timing info
*/
do {
struct rtdetq *n = rte->next;
m_freem(rte->m);
free(rte, M_MRTABLE6);
rte = n;
} while (rte != NULL);
MRT6STAT_INC(mrt6s_cache_cleanups);
n6expire[i]--;
*nptr = mfc->mf6c_next;
free(mfc, M_MRTABLE6);
} else {
nptr = &mfc->mf6c_next;
}
}
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
MFC6_UNLOCK();
callout_reset(&expire_upcalls_ch, EXPIRE_TIMEOUT,
expire_upcalls, NULL);
}
/*
* Packet forwarding routine once entry in the cache is made
*/
static int
ip6_mdq(struct mbuf *m, struct ifnet *ifp, struct mf6c *rt)
{
struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *);
mifi_t mifi, iif;
struct mif6 *mifp;
int plen = m->m_pkthdr.len;
struct in6_addr src0, dst0; /* copies for local work */
u_int32_t iszone, idzone, oszone, odzone;
int error = 0;
/*
* Don't forward if it didn't arrive from the parent mif
* for its origin.
*/
mifi = rt->mf6c_parent;
if ((mifi >= nummifs) || (mif6table[mifi].m6_ifp != ifp)) {
/* came in the wrong interface */
MRT6_DLOG(DEBUG_FORWARD,
"wrong if: ifid %d mifi %d mififid %x", ifp->if_index,
mifi, mif6table[mifi].m6_ifp->if_index);
MRT6STAT_INC(mrt6s_wrong_if);
rt->mf6c_wrong_if++;
/*
* If we are doing PIM processing, and we are forwarding
* packets on this interface, send a message to the
* routing daemon.
*/
/* have to make sure this is a valid mif */
if (mifi < nummifs && mif6table[mifi].m6_ifp)
if (V_pim6 && (m->m_flags & M_LOOP) == 0) {
/*
* Check the M_LOOP flag to avoid an
* unnecessary PIM assert.
* XXX: M_LOOP is an ad-hoc hack...
*/
static struct sockaddr_in6 sin6 =
{ sizeof(sin6), AF_INET6 };
struct mbuf *mm;
struct mrt6msg *im;
#ifdef MRT6_OINIT
struct omrt6msg *oim;
#endif
mm = m_copym(m, 0, sizeof(struct ip6_hdr),
M_NOWAIT);
if (mm &&
(!M_WRITABLE(mm) ||
mm->m_len < sizeof(struct ip6_hdr)))
mm = m_pullup(mm, sizeof(struct ip6_hdr));
if (mm == NULL)
return (ENOBUFS);
#ifdef MRT6_OINIT
oim = NULL;
#endif
im = NULL;
switch (V_ip6_mrouter_ver) {
#ifdef MRT6_OINIT
case MRT6_OINIT:
oim = mtod(mm, struct omrt6msg *);
oim->im6_msgtype = MRT6MSG_WRONGMIF;
oim->im6_mbz = 0;
break;
#endif
case MRT6_INIT:
im = mtod(mm, struct mrt6msg *);
im->im6_msgtype = MRT6MSG_WRONGMIF;
im->im6_mbz = 0;
break;
default:
m_freem(mm);
return (EINVAL);
}
for (mifp = mif6table, iif = 0;
iif < nummifs && mifp &&
mifp->m6_ifp != ifp;
mifp++, iif++)
;
switch (V_ip6_mrouter_ver) {
#ifdef MRT6_OINIT
case MRT6_OINIT:
oim->im6_mif = iif;
sin6.sin6_addr = oim->im6_src;
break;
#endif
case MRT6_INIT:
im->im6_mif = iif;
sin6.sin6_addr = im->im6_src;
break;
}
MRT6STAT_INC(mrt6s_upcalls);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (socket_send(V_ip6_mrouter, mm, &sin6) < 0) {
MRT6_DLOG(DEBUG_ANY,
"ip6_mrouter socket queue full");
MRT6STAT_INC(mrt6s_upq_sockfull);
return (ENOBUFS);
} /* if socket Q full */
} /* if PIM */
return (0);
} /* if wrong iif */
/* If I sourced this packet, it counts as output, else it was input. */
if (m->m_pkthdr.rcvif == NULL) {
/* XXX: is rcvif really NULL when output?? */
mif6table[mifi].m6_pkt_out++;
mif6table[mifi].m6_bytes_out += plen;
} else {
mif6table[mifi].m6_pkt_in++;
mif6table[mifi].m6_bytes_in += plen;
}
rt->mf6c_pkt_cnt++;
rt->mf6c_byte_cnt += plen;
/*
* For each mif, forward a copy of the packet if there are group
* members downstream on the interface.
*/
src0 = ip6->ip6_src;
dst0 = ip6->ip6_dst;
if ((error = in6_setscope(&src0, ifp, &iszone)) != 0 ||
(error = in6_setscope(&dst0, ifp, &idzone)) != 0) {
IP6STAT_INC(ip6s_badscope);
return (error);
}
for (mifp = mif6table, mifi = 0; mifi < nummifs; mifp++, mifi++) {
if (IF_ISSET(mifi, &rt->mf6c_ifset)) {
/*
* check if the outgoing packet is going to break
* a scope boundary.
* XXX For packets through PIM register tunnel
* interface, we believe a routing daemon.
*/
if (!(mif6table[rt->mf6c_parent].m6_flags &
MIFF_REGISTER) &&
!(mif6table[mifi].m6_flags & MIFF_REGISTER)) {
if (in6_setscope(&src0, mif6table[mifi].m6_ifp,
&oszone) ||
in6_setscope(&dst0, mif6table[mifi].m6_ifp,
&odzone) ||
iszone != oszone ||
idzone != odzone) {
IP6STAT_INC(ip6s_badscope);
continue;
}
}
mifp->m6_pkt_out++;
mifp->m6_bytes_out += plen;
if (mifp->m6_flags & MIFF_REGISTER)
register_send(ip6, mifp, m);
else
phyint_send(ip6, mifp, m);
}
}
return (0);
}
static void
phyint_send(struct ip6_hdr *ip6, struct mif6 *mifp, struct mbuf *m)
{
#ifdef MRT6DEBUG
char ip6bufs[INET6_ADDRSTRLEN], ip6bufd[INET6_ADDRSTRLEN];
#endif
struct mbuf *mb_copy;
struct ifnet *ifp = mifp->m6_ifp;
int error = 0;
u_long linkmtu;
/*
* Make a new reference to the packet; make sure that
* the IPv6 header is actually copied, not just referenced,
* so that ip6_output() only scribbles on the copy.
*/
mb_copy = m_copym(m, 0, M_COPYALL, M_NOWAIT);
if (mb_copy &&
(!M_WRITABLE(mb_copy) || mb_copy->m_len < sizeof(struct ip6_hdr)))
mb_copy = m_pullup(mb_copy, sizeof(struct ip6_hdr));
if (mb_copy == NULL) {
return;
}
/* set MCAST flag to the outgoing packet */
mb_copy->m_flags |= M_MCAST;
/*
* If we sourced the packet, call ip6_output since we may devide
* the packet into fragments when the packet is too big for the
* outgoing interface.
* Otherwise, we can simply send the packet to the interface
* sending queue.
*/
if (m->m_pkthdr.rcvif == NULL) {
struct ip6_moptions im6o;
struct epoch_tracker et;
im6o.im6o_multicast_ifp = ifp;
/* XXX: ip6_output will override ip6->ip6_hlim */
im6o.im6o_multicast_hlim = ip6->ip6_hlim;
im6o.im6o_multicast_loop = 1;
NET_EPOCH_ENTER(et);
error = ip6_output(mb_copy, NULL, NULL, IPV6_FORWARDING, &im6o,
NULL, NULL);
NET_EPOCH_EXIT(et);
MRT6_DLOG(DEBUG_XMIT, "mif %u err %d",
(uint16_t)(mifp - mif6table), error);
return;
}
/*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* If configured to loop back multicasts by default,
* loop back a copy now.
*/
if (in6_mcast_loop)
ip6_mloopback(ifp, m);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* Put the packet into the sending queue of the outgoing interface
* if it would fit in the MTU of the interface.
*/
linkmtu = IN6_LINKMTU(ifp);
if (mb_copy->m_pkthdr.len <= linkmtu || linkmtu < IPV6_MMTU) {
struct sockaddr_in6 dst6;
bzero(&dst6, sizeof(dst6));
dst6.sin6_len = sizeof(struct sockaddr_in6);
dst6.sin6_family = AF_INET6;
dst6.sin6_addr = ip6->ip6_dst;
IP_PROBE(send, NULL, NULL, ip6, ifp, NULL, ip6);
/*
* We just call if_output instead of nd6_output here, since
* we need no ND for a multicast forwarded packet...right?
*/
m_clrprotoflags(m); /* Avoid confusing lower layers. */
error = (*ifp->if_output)(ifp, mb_copy,
(struct sockaddr *)&dst6, NULL);
MRT6_DLOG(DEBUG_XMIT, "mif %u err %d",
(uint16_t)(mifp - mif6table), error);
} else {
/*
* pMTU discovery is intentionally disabled by default, since
* various router may notify pMTU in multicast, which can be
* a DDoS to a router
*/
if (V_ip6_mcast_pmtu)
icmp6_error(mb_copy, ICMP6_PACKET_TOO_BIG, 0, linkmtu);
else {
MRT6_DLOG(DEBUG_XMIT, " packet too big on %s o %s "
"g %s size %d (discarded)", if_name(ifp),
ip6_sprintf(ip6bufs, &ip6->ip6_src),
ip6_sprintf(ip6bufd, &ip6->ip6_dst),
mb_copy->m_pkthdr.len);
m_freem(mb_copy); /* simply discard the packet */
}
}
}
static int
register_send(struct ip6_hdr *ip6, struct mif6 *mif, struct mbuf *m)
{
#ifdef MRT6DEBUG
char ip6bufs[INET6_ADDRSTRLEN], ip6bufd[INET6_ADDRSTRLEN];
#endif
struct mbuf *mm;
int i, len = m->m_pkthdr.len;
static struct sockaddr_in6 sin6 = { sizeof(sin6), AF_INET6 };
struct mrt6msg *im6;
MRT6_DLOG(DEBUG_ANY, "src %s dst %s",
ip6_sprintf(ip6bufs, &ip6->ip6_src),
ip6_sprintf(ip6bufd, &ip6->ip6_dst));
PIM6STAT_INC(pim6s_snd_registers);
/* Make a copy of the packet to send to the user level process. */
mm = m_gethdr(M_NOWAIT, MT_DATA);
if (mm == NULL)
return (ENOBUFS);
mm->m_data += max_linkhdr;
mm->m_len = sizeof(struct ip6_hdr);
if ((mm->m_next = m_copym(m, 0, M_COPYALL, M_NOWAIT)) == NULL) {
m_freem(mm);
return (ENOBUFS);
}
i = MHLEN - M_LEADINGSPACE(mm);
if (i > len)
i = len;
mm = m_pullup(mm, i);
if (mm == NULL)
return (ENOBUFS);
/* TODO: check it! */
mm->m_pkthdr.len = len + sizeof(struct ip6_hdr);
/*
* Send message to routing daemon
*/
sin6.sin6_addr = ip6->ip6_src;
im6 = mtod(mm, struct mrt6msg *);
im6->im6_msgtype = MRT6MSG_WHOLEPKT;
im6->im6_mbz = 0;
im6->im6_mif = mif - mif6table;
/* iif info is not given for reg. encap.n */
MRT6STAT_INC(mrt6s_upcalls);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (socket_send(V_ip6_mrouter, mm, &sin6) < 0) {
MRT6_DLOG(DEBUG_ANY, "ip6_mrouter socket queue full");
MRT6STAT_INC(mrt6s_upq_sockfull);
return (ENOBUFS);
}
return (0);
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
/*
* pim6_encapcheck() is called by the encap6_input() path at runtime to
* determine if a packet is for PIM; allowing PIM to be dynamically loaded
* into the kernel.
*/
static int
Rework IP encapsulation handling code. Currently it has several disadvantages: - it uses single mutex to protect internal structures. It is used by data- and control- path, thus there are no parallelism at all. - it uses single list to keep encap handlers for both INET and INET6 families. - struct encaptab keeps unneeded information (src, dst, masks, protosw), that isn't used by code in the source tree. - matches are prioritized and when many tunneling interfaces are registered, encapcheck handler of each interface is invoked for each packet. The search takes O(n) for n interfaces. All this work is done with exclusive lock held. What this patch includes: - the datapath is converted to be lockless using epoch(9) KPI. - struct encaptab now linked using CK_LIST. - all unused fields removed from struct encaptab. Several new fields addedr: min_length is the minimum packet length, that encapsulation handler expects to see; exact_match is maximum number of bits, that can return an encapsulation handler, when it wants to consume a packet. - IPv6 and IPv4 handlers are stored in separate lists; - added new "encap_lookup_t" method, that will be used later. It is targeted to speedup lookup of needed interface, when gif(4)/gre(4) have many interfaces. - the need to use protosw structure is eliminated. The only pr_input method was used from this structure, so I don't see the need to keep using it. - encap_input_t method changed to avoid using mbuf tags to store softc pointer. Now it is passed directly trough encap_input_t method. encap_getarg() funtions is removed. - all sockaddr structures and code that uses them removed. We don't have any code in the tree that uses them. All consumers use encap_attach_func() method, that relies on invoking of encapcheck() to determine the needed handler. - introduced struct encap_config, it contains parameters of encap handler that is going to be registered by encap_attach() function. - encap handlers are stored in lists ordered by exact_match value, thus handlers that need more bits to match will be checked first, and if encapcheck method returns exact_match value, the search will be stopped. - all current consumers changed to use new KPI. Reviewed by: mmacy Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D15617
2018-06-05 20:51:01 +00:00
pim6_encapcheck(const struct mbuf *m __unused, int off __unused,
int proto __unused, void *arg __unused)
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
{
KASSERT(proto == IPPROTO_PIM, ("not for IPPROTO_PIM"));
Rework IP encapsulation handling code. Currently it has several disadvantages: - it uses single mutex to protect internal structures. It is used by data- and control- path, thus there are no parallelism at all. - it uses single list to keep encap handlers for both INET and INET6 families. - struct encaptab keeps unneeded information (src, dst, masks, protosw), that isn't used by code in the source tree. - matches are prioritized and when many tunneling interfaces are registered, encapcheck handler of each interface is invoked for each packet. The search takes O(n) for n interfaces. All this work is done with exclusive lock held. What this patch includes: - the datapath is converted to be lockless using epoch(9) KPI. - struct encaptab now linked using CK_LIST. - all unused fields removed from struct encaptab. Several new fields addedr: min_length is the minimum packet length, that encapsulation handler expects to see; exact_match is maximum number of bits, that can return an encapsulation handler, when it wants to consume a packet. - IPv6 and IPv4 handlers are stored in separate lists; - added new "encap_lookup_t" method, that will be used later. It is targeted to speedup lookup of needed interface, when gif(4)/gre(4) have many interfaces. - the need to use protosw structure is eliminated. The only pr_input method was used from this structure, so I don't see the need to keep using it. - encap_input_t method changed to avoid using mbuf tags to store softc pointer. Now it is passed directly trough encap_input_t method. encap_getarg() funtions is removed. - all sockaddr structures and code that uses them removed. We don't have any code in the tree that uses them. All consumers use encap_attach_func() method, that relies on invoking of encapcheck() to determine the needed handler. - introduced struct encap_config, it contains parameters of encap handler that is going to be registered by encap_attach() function. - encap handlers are stored in lists ordered by exact_match value, thus handlers that need more bits to match will be checked first, and if encapcheck method returns exact_match value, the search will be stopped. - all current consumers changed to use new KPI. Reviewed by: mmacy Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D15617
2018-06-05 20:51:01 +00:00
return (8); /* claim the datagram. */
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
}
/*
* PIM sparse mode hook
* Receives the pim control messages, and passes them up to the listening
* socket, using rip6_input.
* The only message processed is the REGISTER pim message; the pim header
* is stripped off, and the inner packet is passed to register_mforward.
*/
Rework IP encapsulation handling code. Currently it has several disadvantages: - it uses single mutex to protect internal structures. It is used by data- and control- path, thus there are no parallelism at all. - it uses single list to keep encap handlers for both INET and INET6 families. - struct encaptab keeps unneeded information (src, dst, masks, protosw), that isn't used by code in the source tree. - matches are prioritized and when many tunneling interfaces are registered, encapcheck handler of each interface is invoked for each packet. The search takes O(n) for n interfaces. All this work is done with exclusive lock held. What this patch includes: - the datapath is converted to be lockless using epoch(9) KPI. - struct encaptab now linked using CK_LIST. - all unused fields removed from struct encaptab. Several new fields addedr: min_length is the minimum packet length, that encapsulation handler expects to see; exact_match is maximum number of bits, that can return an encapsulation handler, when it wants to consume a packet. - IPv6 and IPv4 handlers are stored in separate lists; - added new "encap_lookup_t" method, that will be used later. It is targeted to speedup lookup of needed interface, when gif(4)/gre(4) have many interfaces. - the need to use protosw structure is eliminated. The only pr_input method was used from this structure, so I don't see the need to keep using it. - encap_input_t method changed to avoid using mbuf tags to store softc pointer. Now it is passed directly trough encap_input_t method. encap_getarg() funtions is removed. - all sockaddr structures and code that uses them removed. We don't have any code in the tree that uses them. All consumers use encap_attach_func() method, that relies on invoking of encapcheck() to determine the needed handler. - introduced struct encap_config, it contains parameters of encap handler that is going to be registered by encap_attach() function. - encap handlers are stored in lists ordered by exact_match value, thus handlers that need more bits to match will be checked first, and if encapcheck method returns exact_match value, the search will be stopped. - all current consumers changed to use new KPI. Reviewed by: mmacy Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D15617
2018-06-05 20:51:01 +00:00
static int
pim6_input(struct mbuf *m, int off, int proto, void *arg __unused)
{
struct pim *pim; /* pointer to a pim struct */
struct ip6_hdr *ip6;
int pimlen;
int minlen;
PIM6STAT_INC(pim6s_rcv_total);
/*
* Validate lengths
*/
pimlen = m->m_pkthdr.len - off;
if (pimlen < PIM_MINLEN) {
PIM6STAT_INC(pim6s_rcv_tooshort);
MRT6_DLOG(DEBUG_PIM, "PIM packet too short");
m_freem(m);
return (IPPROTO_DONE);
}
/*
* if the packet is at least as big as a REGISTER, go ahead
* and grab the PIM REGISTER header size, to avoid another
* possible m_pullup() later.
*
* PIM_MINLEN == pimhdr + u_int32 == 8
* PIM6_REG_MINLEN == pimhdr + reghdr + eip6hdr == 4 + 4 + 40
*/
minlen = (pimlen >= PIM6_REG_MINLEN) ? PIM6_REG_MINLEN : PIM_MINLEN;
/*
* Make sure that the IP6 and PIM headers in contiguous memory, and
* possibly the PIM REGISTER header
*/
if (m->m_len < off + minlen) {
m = m_pullup(m, off + minlen);
if (m == NULL) {
IP6STAT_INC(ip6s_exthdrtoolong);
return (IPPROTO_DONE);
}
}
ip6 = mtod(m, struct ip6_hdr *);
pim = (struct pim *)((caddr_t)ip6 + off);
#define PIM6_CHECKSUM
#ifdef PIM6_CHECKSUM
{
int cksumlen;
/*
* Validate checksum.
* If PIM REGISTER, exclude the data packet
*/
if (pim->pim_type == PIM_REGISTER)
cksumlen = PIM_MINLEN;
else
cksumlen = pimlen;
if (in6_cksum(m, IPPROTO_PIM, off, cksumlen)) {
PIM6STAT_INC(pim6s_rcv_badsum);
MRT6_DLOG(DEBUG_PIM, "invalid checksum");
m_freem(m);
return (IPPROTO_DONE);
}
}
#endif /* PIM_CHECKSUM */
/* PIM version check */
if (pim->pim_ver != PIM_VERSION) {
PIM6STAT_INC(pim6s_rcv_badversion);
MRT6_DLOG(DEBUG_ANY | DEBUG_ERR,
"incorrect version %d, expecting %d",
pim->pim_ver, PIM_VERSION);
m_freem(m);
return (IPPROTO_DONE);
}
if (pim->pim_type == PIM_REGISTER) {
/*
* since this is a REGISTER, we'll make a copy of the register
* headers ip6+pim+u_int32_t+encap_ip6, to be passed up to the
* routing daemon.
*/
static struct sockaddr_in6 dst = { sizeof(dst), AF_INET6 };
struct mbuf *mcp;
struct ip6_hdr *eip6;
u_int32_t *reghdr;
int rc;
#ifdef MRT6DEBUG
char ip6bufs[INET6_ADDRSTRLEN], ip6bufd[INET6_ADDRSTRLEN];
#endif
PIM6STAT_INC(pim6s_rcv_registers);
if ((reg_mif_num >= nummifs) || (reg_mif_num == (mifi_t) -1)) {
MRT6_DLOG(DEBUG_PIM, "register mif not set: %d",
reg_mif_num);
m_freem(m);
return (IPPROTO_DONE);
}
reghdr = (u_int32_t *)(pim + 1);
if ((ntohl(*reghdr) & PIM_NULL_REGISTER))
goto pim6_input_to_daemon;
/*
* Validate length
*/
if (pimlen < PIM6_REG_MINLEN) {
PIM6STAT_INC(pim6s_rcv_tooshort);
PIM6STAT_INC(pim6s_rcv_badregisters);
MRT6_DLOG(DEBUG_ANY | DEBUG_ERR, "register packet "
"size too small %d from %s",
pimlen, ip6_sprintf(ip6bufs, &ip6->ip6_src));
m_freem(m);
return (IPPROTO_DONE);
}
eip6 = (struct ip6_hdr *) (reghdr + 1);
MRT6_DLOG(DEBUG_PIM, "eip6: %s -> %s, eip6 plen %d",
ip6_sprintf(ip6bufs, &eip6->ip6_src),
ip6_sprintf(ip6bufd, &eip6->ip6_dst),
ntohs(eip6->ip6_plen));
/* verify the version number of the inner packet */
if ((eip6->ip6_vfc & IPV6_VERSION_MASK) != IPV6_VERSION) {
PIM6STAT_INC(pim6s_rcv_badregisters);
MRT6_DLOG(DEBUG_ANY, "invalid IP version (%d) "
"of the inner packet",
(eip6->ip6_vfc & IPV6_VERSION));
m_freem(m);
return (IPPROTO_DONE);
}
/* verify the inner packet is destined to a mcast group */
if (!IN6_IS_ADDR_MULTICAST(&eip6->ip6_dst)) {
PIM6STAT_INC(pim6s_rcv_badregisters);
MRT6_DLOG(DEBUG_PIM, "inner packet of register "
"is not multicast %s",
ip6_sprintf(ip6bufd, &eip6->ip6_dst));
m_freem(m);
return (IPPROTO_DONE);
}
/*
* make a copy of the whole header to pass to the daemon later.
*/
mcp = m_copym(m, 0, off + PIM6_REG_MINLEN, M_NOWAIT);
if (mcp == NULL) {
MRT6_DLOG(DEBUG_ANY | DEBUG_ERR, "pim register: "
"could not copy register head");
m_freem(m);
return (IPPROTO_DONE);
}
/*
* forward the inner ip6 packet; point m_data at the inner ip6.
*/
m_adj(m, off + PIM_MINLEN);
MRT6_DLOG(DEBUG_PIM, "forwarding decapsulated register: "
"src %s, dst %s, mif %d",
ip6_sprintf(ip6bufs, &eip6->ip6_src),
ip6_sprintf(ip6bufd, &eip6->ip6_dst), reg_mif_num);
rc = if_simloop(mif6table[reg_mif_num].m6_ifp, m,
dst.sin6_family, 0);
/* prepare the register head to send to the mrouting daemon */
m = mcp;
}
/*
* Pass the PIM message up to the daemon; if it is a register message
* pass the 'head' only up to the daemon. This includes the
* encapsulator ip6 header, pim header, register header and the
* encapsulated ip6 header.
*/
pim6_input_to_daemon:
Rework IP encapsulation handling code. Currently it has several disadvantages: - it uses single mutex to protect internal structures. It is used by data- and control- path, thus there are no parallelism at all. - it uses single list to keep encap handlers for both INET and INET6 families. - struct encaptab keeps unneeded information (src, dst, masks, protosw), that isn't used by code in the source tree. - matches are prioritized and when many tunneling interfaces are registered, encapcheck handler of each interface is invoked for each packet. The search takes O(n) for n interfaces. All this work is done with exclusive lock held. What this patch includes: - the datapath is converted to be lockless using epoch(9) KPI. - struct encaptab now linked using CK_LIST. - all unused fields removed from struct encaptab. Several new fields addedr: min_length is the minimum packet length, that encapsulation handler expects to see; exact_match is maximum number of bits, that can return an encapsulation handler, when it wants to consume a packet. - IPv6 and IPv4 handlers are stored in separate lists; - added new "encap_lookup_t" method, that will be used later. It is targeted to speedup lookup of needed interface, when gif(4)/gre(4) have many interfaces. - the need to use protosw structure is eliminated. The only pr_input method was used from this structure, so I don't see the need to keep using it. - encap_input_t method changed to avoid using mbuf tags to store softc pointer. Now it is passed directly trough encap_input_t method. encap_getarg() funtions is removed. - all sockaddr structures and code that uses them removed. We don't have any code in the tree that uses them. All consumers use encap_attach_func() method, that relies on invoking of encapcheck() to determine the needed handler. - introduced struct encap_config, it contains parameters of encap handler that is going to be registered by encap_attach() function. - encap handlers are stored in lists ordered by exact_match value, thus handlers that need more bits to match will be checked first, and if encapcheck method returns exact_match value, the search will be stopped. - all current consumers changed to use new KPI. Reviewed by: mmacy Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D15617
2018-06-05 20:51:01 +00:00
return (rip6_input(&m, &off, proto));
}
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
static int
ip6_mroute_modevent(module_t mod, int type, void *unused)
{
switch (type) {
case MOD_LOAD:
MROUTER6_LOCK_INIT();
MFC6_LOCK_INIT();
MIF6_LOCK_INIT();
Rework IP encapsulation handling code. Currently it has several disadvantages: - it uses single mutex to protect internal structures. It is used by data- and control- path, thus there are no parallelism at all. - it uses single list to keep encap handlers for both INET and INET6 families. - struct encaptab keeps unneeded information (src, dst, masks, protosw), that isn't used by code in the source tree. - matches are prioritized and when many tunneling interfaces are registered, encapcheck handler of each interface is invoked for each packet. The search takes O(n) for n interfaces. All this work is done with exclusive lock held. What this patch includes: - the datapath is converted to be lockless using epoch(9) KPI. - struct encaptab now linked using CK_LIST. - all unused fields removed from struct encaptab. Several new fields addedr: min_length is the minimum packet length, that encapsulation handler expects to see; exact_match is maximum number of bits, that can return an encapsulation handler, when it wants to consume a packet. - IPv6 and IPv4 handlers are stored in separate lists; - added new "encap_lookup_t" method, that will be used later. It is targeted to speedup lookup of needed interface, when gif(4)/gre(4) have many interfaces. - the need to use protosw structure is eliminated. The only pr_input method was used from this structure, so I don't see the need to keep using it. - encap_input_t method changed to avoid using mbuf tags to store softc pointer. Now it is passed directly trough encap_input_t method. encap_getarg() funtions is removed. - all sockaddr structures and code that uses them removed. We don't have any code in the tree that uses them. All consumers use encap_attach_func() method, that relies on invoking of encapcheck() to determine the needed handler. - introduced struct encap_config, it contains parameters of encap handler that is going to be registered by encap_attach() function. - encap handlers are stored in lists ordered by exact_match value, thus handlers that need more bits to match will be checked first, and if encapcheck method returns exact_match value, the search will be stopped. - all current consumers changed to use new KPI. Reviewed by: mmacy Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D15617
2018-06-05 20:51:01 +00:00
pim6_encap_cookie = ip6_encap_attach(&ipv6_encap_cfg,
NULL, M_WAITOK);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
if (pim6_encap_cookie == NULL) {
printf("ip6_mroute: unable to attach pim6 encap\n");
MIF6_LOCK_DESTROY();
MFC6_LOCK_DESTROY();
MROUTER6_LOCK_DESTROY();
return (EINVAL);
}
ip6_mforward = X_ip6_mforward;
ip6_mrouter_done = X_ip6_mrouter_done;
ip6_mrouter_get = X_ip6_mrouter_get;
ip6_mrouter_set = X_ip6_mrouter_set;
mrt6_ioctl = X_mrt6_ioctl;
break;
case MOD_UNLOAD:
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (V_ip6_mrouter != NULL)
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
return EINVAL;
if (pim6_encap_cookie) {
Rework IP encapsulation handling code. Currently it has several disadvantages: - it uses single mutex to protect internal structures. It is used by data- and control- path, thus there are no parallelism at all. - it uses single list to keep encap handlers for both INET and INET6 families. - struct encaptab keeps unneeded information (src, dst, masks, protosw), that isn't used by code in the source tree. - matches are prioritized and when many tunneling interfaces are registered, encapcheck handler of each interface is invoked for each packet. The search takes O(n) for n interfaces. All this work is done with exclusive lock held. What this patch includes: - the datapath is converted to be lockless using epoch(9) KPI. - struct encaptab now linked using CK_LIST. - all unused fields removed from struct encaptab. Several new fields addedr: min_length is the minimum packet length, that encapsulation handler expects to see; exact_match is maximum number of bits, that can return an encapsulation handler, when it wants to consume a packet. - IPv6 and IPv4 handlers are stored in separate lists; - added new "encap_lookup_t" method, that will be used later. It is targeted to speedup lookup of needed interface, when gif(4)/gre(4) have many interfaces. - the need to use protosw structure is eliminated. The only pr_input method was used from this structure, so I don't see the need to keep using it. - encap_input_t method changed to avoid using mbuf tags to store softc pointer. Now it is passed directly trough encap_input_t method. encap_getarg() funtions is removed. - all sockaddr structures and code that uses them removed. We don't have any code in the tree that uses them. All consumers use encap_attach_func() method, that relies on invoking of encapcheck() to determine the needed handler. - introduced struct encap_config, it contains parameters of encap handler that is going to be registered by encap_attach() function. - encap handlers are stored in lists ordered by exact_match value, thus handlers that need more bits to match will be checked first, and if encapcheck method returns exact_match value, the search will be stopped. - all current consumers changed to use new KPI. Reviewed by: mmacy Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D15617
2018-06-05 20:51:01 +00:00
ip6_encap_detach(pim6_encap_cookie);
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
pim6_encap_cookie = NULL;
}
X_ip6_mrouter_done();
ip6_mforward = NULL;
ip6_mrouter_done = NULL;
ip6_mrouter_get = NULL;
ip6_mrouter_set = NULL;
mrt6_ioctl = NULL;
MIF6_LOCK_DESTROY();
MFC6_LOCK_DESTROY();
MROUTER6_LOCK_DESTROY();
break;
default:
return (EOPNOTSUPP);
}
return (0);
}
static moduledata_t ip6_mroutemod = {
"ip6_mroute",
ip6_mroute_modevent,
0
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
};
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
DECLARE_MODULE(ip6_mroute, ip6_mroutemod, SI_SUB_PROTO_MC, SI_ORDER_ANY);