d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ba9cbbdb5a
freebsd-skq/sys/dev/syscons/syscons.c

3943 lines
100 KiB
C
Raw Normal View History

Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
/*-
Convert files to UTF-8
2012-01-15 13:23:18 +00:00
* Copyright (c) 1992-1998 Søren Schmidt
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
* All rights reserved.
*
Add VESA mode support for syscons, which enables the support of 15, 16, 24, and 32 bit modes. To use that, syscons(4) must be built with the compile time option 'options SC_PIXEL_MODE', and VESA support (a.k.a. vesa.ko) must be either loaded, or be compiled into the kernel. Do not return EINVAL when the mouse state is changed to what it already is, which seems to cause problems when you have two mice attached, and applications are not likely obtain useful information through the EINVAL caused by showing the mouse pointer twice. Teach vidcontrol(8) about mode names like MODE_<NUMBER>, where <NUMBER> is the video mode number from the vidcontrol -i mode output. Also, revert the video mode if something fails. Obtained from: DragonFlyBSD Discussed at: current@ with patch attached [1] PR: kern/71142 [2] Submitted by: Xuefeng DENG <dsnofe at msn com> [1], Cyrille Lefevre <cyrille dot lefevre at laposte dot net> [2]
2005-05-29 08:43:44 +00:00
* This code is derived from software contributed to The DragonFly Project
* by Sascha Wildner <saw@online.de>
*
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
* 3. The name of the author may not be used to endorse or promote products
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
* derived from this software without specific prior written permission.
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
*
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
*/
Use __FBSDID(). Also some minor style cleanups.
2003-08-24 18:17:24 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#include "opt_compat.h"
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#include "opt_syscons.h"
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#include "opt_splash.h"
Convert DDB to new-style option.
1996-01-04 21:13:23 +00:00
#include "opt_ddb.h"
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make
1994-08-13 03:50:34 +00:00
#include <sys/param.h>
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
#include <sys/systm.h>
Make use of the more flexable device hints by adding a new field, vesa_mode to specify VESA mode, as suggested by jhb@.
2009-09-12 00:12:47 +00:00
#include <sys/bus.h>
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make
1994-08-13 03:50:34 +00:00
#include <sys/conf.h>
Undo part of the tangle of having sys/lock.h and sys/mutex.h included in other "system" header files. Also help the deprecation of lockmgr.h by making it a sub-include of sys/lock.h and removing sys/lockmgr.h form kernel .c files. Sort sys/*.h includes where possible in affected files. OK'ed by: bde (with reservations)
2001-05-01 08:13:21 +00:00
#include <sys/cons.h>
#include <sys/consio.h>
Update for the KDB framework. Sanitize the alpha console code now that it's in the way even more. Basicly: remove all alpha specific console support from gfb(4), sio(4) and syscons(4). Rewrite the alpha console initialization to be identical to all other platforms. In a nutshell: call cninit(). The platform specific code now only sets or clears RB_SERIAL and thus automaticly causes the right console to be selected. sio.c: o Replace the remote GDB hacks and use the GDB debug port interface instead. o Make debugging code conditional upon KDB instead of DDB. o Call kdb_alt_break() instead of db_alt_break(). o Call kdb_enter() instead of breakpoint(). o Remove the ugly compatibility of using the console as the debug port.
2004-07-10 22:29:41 +00:00
#include <sys/kdb.h>
Undo part of the tangle of having sys/lock.h and sys/mutex.h included in other "system" header files. Also help the deprecation of lockmgr.h by making it a sub-include of sys/lock.h and removing sys/lockmgr.h form kernel .c files. Sort sys/*.h includes where possible in affected files. OK'ed by: bde (with reservations)
2001-05-01 08:13:21 +00:00
#include <sys/eventhandler.h>
#include <sys/fbio.h>
#include <sys/kbio.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
#include <sys/priv.h>
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make
1994-08-13 03:50:34 +00:00
#include <sys/proc.h>
Undo part of the tangle of having sys/lock.h and sys/mutex.h included in other "system" header files. Also help the deprecation of lockmgr.h by making it a sub-include of sys/lock.h and removing sys/lockmgr.h form kernel .c files. Sort sys/*.h includes where possible in affected files. OK'ed by: bde (with reservations)
2001-05-01 08:13:21 +00:00
#include <sys/random.h>
#include <sys/reboot.h>
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
#include <sys/serial.h>
Replaced #includes of <sys/user.h> by less gross headers, usually <sys/vm.h>. Many device drivers need only the definition of vtophys() from vm. Added nearby #includes of <sys/conf.h> where appropriate.
1995-12-06 23:52:35 +00:00
#include <sys/signalvar.h>
Add "panic key" function to syscons. When this key is defined in a keymap and pressed, the system panic will be forced. This feature must be specifically enabled by a new sysctl variable: machdep.enable_panic_key. Its default value is 0. The panic key won't do anything unless this variable is set to non-zero. To use the panic key, add a keyword 'panic' to a key in your keymap file. The following example assigns the panic function to SysReq (Alt-PrintScreen) key (keycode 84). 083 del '.' '.' '.' '.' '.' boot boot N 084 panic nop nop nop panic nop nop nop O 085 nop nop nop nop nop nop nop nop O PR: kern/13721
1999-12-10 04:30:58 +00:00
#include <sys/sysctl.h>
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make
1994-08-13 03:50:34 +00:00
#include <sys/tty.h>
Some fix for the recent apm module changes. - Now that apm loadable module can inform its existence to other kernel components (e.g. i386/isa/clock.c:startrtclock()'s TCS hack). - Exchange priority of SI_SUB_CPU and SI_SUB_KLD for above purpose. - Add simple arbitration mechanism for APM vs. ACPI. This prevents the kernel enables both of them. - Remove obsolete `#ifdef DEV_APM' related code. - Add abstracted interface for Powermanagement operations. Public apm(4) functions, such as apm_suspend(), should be replaced new interfaces. Currently only power_pm_suspend (successor of apm_suspend) is implemented. Reviewed by: peter, arch@ and audit@
2001-11-01 16:34:07 +00:00
#include <sys/power.h>
Finished device configuration database work for all ISA devices (except `ze') and all SCSI devices (except that it's not done quite the way I want). New information added includes: - A text description of the device - A ``state''---unknown, unconfigured, idle, or busy - A generic parent device (with support in the m.i. code) - An interrupt mask type field (which will hopefully go away) so that . ``doconfig'' can be written This requires a new version of the `lsdev' program as well (next commit).
1994-10-23 21:28:03 +00:00
Fix initialization of video_mode_ptr. It only worked if the segments in the far pointers are multiples of 4K (as is normal when the video BIOS is at seg 0xc000). Disallow mode switching if the pointer is bad. Use a new pa_to_va() macro for all BIOS and video addresses in syscons.
1994-10-26 21:51:22 +00:00
#include <machine/clock.h>
Piggyback MIPS changes and add ARM syscons support for devices with framebuffer While here - sort #if defined() order alphabetically
2012-08-25 23:59:31 +00:00
#if defined(__arm__) || defined(__mips__) || \
defined(__powerpc__) || defined(__sparc64__)
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#include <machine/sc_machdep.h>
#else
Oops, changed order of include lines... Reviewed by: Submitted by:
1994-08-17 19:32:23 +00:00
#include <machine/pc/display.h>
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#endif
Implement the KDENABIO etc ioctl's for amd64 as well.
2004-09-24 01:19:11 +00:00
#if defined( __i386__) || defined(__amd64__)
Enable console. There are far too many 'ifdef __i386__' in this file.
2001-10-06 13:34:30 +00:00
#include <machine/psl.h>
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#include <machine/frame.h>
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
#endif
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
#include <machine/stdarg.h>
Finished device configuration database work for all ISA devices (except `ze') and all SCSI devices (except that it's not done quite the way I want). New information added includes: - A text description of the device - A ``state''---unknown, unconfigured, idle, or busy - A generic parent device (with support in the m.i. code) - An interrupt mask type field (which will hopefully go away) so that . ``doconfig'' can be written This requires a new version of the `lsdev' program as well (next commit).
1994-10-23 21:28:03 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
#include <dev/kbd/kbdreg.h>
#include <dev/fb/fbreg.h>
#include <dev/fb/splashreg.h>
#include <dev/syscons/syscons.h>
Fixed a couple of bugs in the mousepointer code. Changed update strategy slightly. Make set_mode & copy_font externally visible.
1996-09-01 18:16:06 +00:00
#define COLD 0
#define WARM 1
Pass 3 of the great devsw changes most devsw referenced functions are now static, as they are in the same file as their devsw structure. I've also added DEVFS support for nearly every device in the system, however many of the devices have 'incorrect' names under DEVFS because I couldn't quickly work out the correct naming conventions. (but devfs won't be coming on line for a month or so anyhow so that doesn't matter) If you "OWN" a device which would normally have an entry in /dev then search for the devfs_add_devsw() entries and munge to make them right.. check out similar devices to see what I might have done in them in you can't see what's going on.. for a laugh compare conf.c conf.h defore and after... :) I have not doen DEVFS entries for any DISKSLICE devices yet as that will be a much more complicated job.. (pass 5 :) pass 4 will be to make the devsw tables of type (cdevsw * ) rather than (cdevsw) seems to work here.. complaints to the usual places.. :)
1995-12-08 11:19:42 +00:00
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
#define DEFAULT_BLANKTIME (5*60) /* 5 minutes */
Don't accept the blank time value, if it is too big. PR: bin/6188
1998-08-03 09:15:36 +00:00
#define MAX_BLANKTIME (7*24*60*60) /* 7 days!? */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#define KEYCODE_BS 0x0e /* "<-- Backspace" key, XXX */
- Add binary compatibility support for obsolete console/mouse ioctls so that existing programs which were compiled before the introduction of the new mouse code and use these ioctls will run unmodified. Suggested by msmith.
1998-01-20 03:37:27 +00:00
Move tty_opened_ns() into syscons.c which is currently the only client of this macro. Suggested by: ed @ MFC after: 1 week
2012-03-29 15:47:29 +00:00
/* NULL-safe version of "tty_opened()" */
#define tty_opened_ns(tp) ((tp) != NULL && tty_opened(tp))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
typedef struct default_attr {
int std_color; /* normal hardware color */
int rev_color; /* reverse hardware color */
} default_attr;
Updated syscons to 0.2b - please test this! It won't be in the ALPHA release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
static default_attr user_default = {
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
SC_NORM_ATTR,
SC_NORM_REV_ATTR,
Updated syscons to 0.2b - please test this! It won't be in the ALPHA release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
};
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static int sc_console_unit = -1;
Make sc_saver_keyb_only (sceen saver interrupted by keyboard input only) the default.
2002-06-06 06:02:17 +00:00
static int sc_saver_keyb_only = 1;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static scr_stat *sc_console;
Eliminate global cons_unavailable flag and replace it by the status bit maintained on a per-device basis. Single variable is inadequate on machines running with multiple consoles enabled.
2004-02-05 01:56:43 +00:00
static struct consdev *sc_consptr;
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
static scr_stat main_console;
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
static struct tty *main_devs[MAXCONS];
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
Fixed a couple of bugs in the mousepointer code. Changed update strategy slightly. Make set_mode & copy_font externally visible.
1996-09-01 18:16:06 +00:00
static char init_done = COLD;
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
static int shutdown_in_progress = FALSE;
static int suspend_in_progress = FALSE;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static char sc_malloc = FALSE;
- Define a convenience macro ISTTYOPEN(). - Slightly refine screen saver logic. No functional change. MFC after: 2 weeks
2001-07-12 11:43:29 +00:00
static int saver_mode = CONS_NO_SAVER; /* LKM/user saver */
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
static int run_scrn_saver = FALSE; /* should run the saver? */
Add a "hw.syscons.bell" sysctl, which can disable the bell at syscons level.
2003-02-20 03:27:09 +00:00
static int enable_bell = TRUE; /* enable beeper */
When SC_DISABLE_KDBKEY or SC_DISABLE_REBOOT are not defined allow the same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey and hw.syscons.kbd_reboot respectively. Apologies to the submitter for taking so long to commit this simple change. PR: kern/72728 Submitted by: Luca Morettoni <morettoni at libero dot it> MFC After: 3 days
2006-01-14 17:57:17 +00:00
#ifndef SC_DISABLE_REBOOT
static int enable_reboot = TRUE; /* enable keyboard reboot */
#endif
#ifndef SC_DISABLE_KDBKEY
static int enable_kdbkey = TRUE; /* enable keyboard debug */
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static long scrn_blank_time = 0; /* screen saver timeout value */
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static int scrn_blanked; /* # of blanked screen */
static int sticky_splash = FALSE;
static void none_saver(sc_softc_t *sc, int blank) { }
static void (*current_saver)(sc_softc_t *, int) = none_saver;
Tidy up a few warnings when used without splash. (things defined but not used)
1999-07-01 20:43:03 +00:00
#endif
Add option for compiling in a 8x16 font.
1997-07-25 11:53:30 +00:00
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
#ifdef SC_NO_SUSPEND_VTYSWITCH
static int sc_no_suspend_vtswitch = 1;
#else
static int sc_no_suspend_vtswitch = 0;
#endif
static int sc_susp_scr;
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs. The SYSCTL_NODE macro defines a list that stores all child-elements of that node. If there's no SYSCTL_DECL macro anywhere else, there's no reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
static SYSCTL_NODE(_hw, OID_AUTO, syscons, CTLFLAG_RD, 0, "syscons");
static SYSCTL_NODE(_hw_syscons, OID_AUTO, saver, CTLFLAG_RD, 0, "saver");
Add some functionality via sysctl to syscons. hw.syscons.saver.keybonly: used to specify that only input is to interrupt the screensaver. This allows one to run a chatty console app but still have the screen blank out until a key is pressed. There should probably also be an ioctl for this, we'll do that later. hw.syscons.saver.blanktime: exports the screensaver timeout via sysctl. Submitted by: Olivier Houchard <doginou@cognet.ci0.org>
2002-04-05 17:53:25 +00:00
SYSCTL_INT(_hw_syscons_saver, OID_AUTO, keybonly, CTLFLAG_RW,
&sc_saver_keyb_only, 0, "screen saver interrupted by input only");
Add a "hw.syscons.bell" sysctl, which can disable the bell at syscons level.
2003-02-20 03:27:09 +00:00
SYSCTL_INT(_hw_syscons, OID_AUTO, bell, CTLFLAG_RW, &enable_bell,
0, "enable bell");
When SC_DISABLE_KDBKEY or SC_DISABLE_REBOOT are not defined allow the same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey and hw.syscons.kbd_reboot respectively. Apologies to the submitter for taking so long to commit this simple change. PR: kern/72728 Submitted by: Luca Morettoni <morettoni at libero dot it> MFC After: 3 days
2006-01-14 17:57:17 +00:00
#ifndef SC_DISABLE_REBOOT
SYSCTL_INT(_hw_syscons, OID_AUTO, kbd_reboot, CTLFLAG_RW|CTLFLAG_SECURE, &enable_reboot,
0, "enable keyboard reboot");
#endif
#ifndef SC_DISABLE_KDBKEY
SYSCTL_INT(_hw_syscons, OID_AUTO, kbd_debug, CTLFLAG_RW|CTLFLAG_SECURE, &enable_kdbkey,
0, "enable keyboard debug");
#endif
Pull in r267961 and r267973 again. Fix for issues reported will follow.
2014-06-28 03:56:17 +00:00
SYSCTL_INT(_hw_syscons, OID_AUTO, sc_no_suspend_vtswitch, CTLFLAG_RWTUN,
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
&sc_no_suspend_vtswitch, 0, "Disable VT switch before suspend.");
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#if !defined(SC_NO_FONT_LOADING) && defined(SC_DFLT_FONT)
#include "font.h"
Fix a brino in my last commit. Noticed by: smp
1997-07-26 07:58:29 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tsw_ioctl_t *sc_user_ioctl;
Make the screen savers runtime switchable. Everybody wants a different default saver, and the size increase in the kernel is minimal ( < 2.5K ).
1994-02-04 10:36:15 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static bios_values_t bios_value;
Add "panic key" function to syscons. When this key is defined in a keymap and pressed, the system panic will be forced. This feature must be specifically enabled by a new sysctl variable: machdep.enable_panic_key. Its default value is 0. The panic key won't do anything unless this variable is set to non-zero. To use the panic key, add a keyword 'panic' to a key in your keymap file. The following example assigns the panic function to SysReq (Alt-PrintScreen) key (keycode 84). 083 del '.' '.' '.' '.' '.' boot boot N 084 panic nop nop nop panic nop nop nop O 085 nop nop nop nop nop nop nop nop O PR: kern/13721
1999-12-10 04:30:58 +00:00
static int enable_panic_key;
SYSCTL_INT(_machdep, OID_AUTO, enable_panic_key, CTLFLAG_RW, &enable_panic_key,
Document machdep.enable_panic_key. Submitted by: Craig Rodrigues
2004-08-02 02:07:56 +00:00
0, "Enable panic via keypress specified in kbdmap(5)");
Add "panic key" function to syscons. When this key is defined in a keymap and pressed, the system panic will be forced. This feature must be specifically enabled by a new sysctl variable: machdep.enable_panic_key. Its default value is 0. The panic key won't do anything unless this variable is set to non-zero. To use the panic key, add a keyword 'panic' to a key in your keymap file. The following example assigns the panic function to SysReq (Alt-PrintScreen) key (keycode 84). 083 del '.' '.' '.' '.' '.' boot boot N 084 panic nop nop nop panic nop nop nop O 085 nop nop nop nop nop nop nop nop O PR: kern/13721
1999-12-10 04:30:58 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#define SC_CONSOLECTL 255
Improve VT_WAITACTIVE semantics. - Wait for requested vty activation regardless its open state. - Remove redundant console cleanup. Approved by: kib MFC after: 1 week
2008-03-20 04:10:52 +00:00
#define VTY_WCHAN(sc, vty) (&SC_DEV(sc, vty))
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
Add a new mechanism, cndbctl(), to tell the console driver that ddb is entered. Don't refer to `in_Debugger' to see if we are in the debugger. (The variable used to be static in Debugger() and wasn't updated if ddb is entered via traps and panic anyway.) - Don't refer to `in_Debugger'. - Add `db_active' to i386/i386/db_interface.d (as in alpha/alpha/db_interface.c). - Remove cnpollc() stub from ddb/db_input.c. - Add the dbctl function to syscons, pcvt, and sio. (The function for pcvt and sio is noop at the moment.) Jointly developed by: bde and me (The final version was tweaked by me and not reviewed by bde. Thus, if there is any error in this commit, that is entirely of mine, not his.) Some changes were obtained from: NetBSD
2000-01-11 14:54:01 +00:00
static int debugger;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Change the way moused talk to syscons, now its only delivering mouseevents via an ioctl (MOUSE_ACTION). Fixed a couple of bugs (destructive cursor, uncut, jitter). Now applications can use the mouse via the MOUSE_MODE ioctl, its possible to have a signal sent on mouseevents, makeing an event loop in the application take over mouseevents.
1996-06-25 08:54:57 +00:00
/* prototypes */
Integrate kbdmux(4) into syscons(4) and kbd code. By default syscons(4) will look for the kbdmux(4) keyboard first, and then, if not found, look for any keyboard. Current kbd code is modified so if kbdmux(4) is the current keyboard, all new keyboards are automatically added to the kbdmux(4). Switch to kbdmux(4) can be done at boot time, by loading kbdmux module at the loader prompt, or at runtime, by kldload'ing the kbdmux module and releasing current active keyboard. If, for whatever reason, kbdmux(4) is not required/desired then just do not load it and everything should work as before. It is also possible to kldunload kbdmux at runtime and syscons(4) will automatically switch to the first available keyboard. No response from: freebsd-current@ MFC after: 1 day
2006-02-28 23:46:23 +00:00
static int sc_allocate_keyboard(sc_softc_t *sc, int unit);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int scvidprobe(int unit, int flags, int cons);
static int sckbdprobe(int unit, int flags, int cons);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static void scmeminit(void *arg);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
static int scdevtounit(struct tty *tp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static kbd_callback_func_t sckbdevent;
static void scinit(int unit, int flags);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
static scr_stat *sc_get_stat(struct tty *tp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static void scterm(int unit, int flags);
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
static void scshutdown(void *, int);
static void scsuspend(void *);
static void scresume(void *);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static u_int scgetc(sc_softc_t *sc, u_int flags);
syscons: make sc_puts static as it is used only privately Perhaps sc_puts should also be renamed to scputs to follow the implied naming conventions in the file... MFC after: 2 weeks
2011-12-11 21:10:11 +00:00
static void sc_puts(scr_stat *scp, u_char *buf, int len, int kernel);
Use the calibrated/adjustable i8254 frequency `timer_freq' instead of TIMER_FREQ. Fixed missing splx() in scrn_timer(). The bug was harmless because of the undocumented behaviour that the ipl is automatically restored for timeout functions (see softclock()). Perhaps we should depend on this behaviour. Fixed the ddb fix in rev.1.176. The in_debugger flag was no use because it only works when the debugger is entered via the keyboard hotkey. The debugger may be entered for breakpoints and traps, and the console putc routine has no way of knowing when it was, so the console putc routine must (almost?) always remove the cursor image. Not fixed: console switching in ddb doesn't work (ISTR it working), and console 0 shouldn't be switched to for the debugger hotkey unless console 0 is /dev/console. Fixed side effects from calling add_keyboard_randomness() in the console getc routine by not calling it. add_keyboard_randomness() currently always reenables interrupts on 386's and 486's. This is very bad if the console getc routine is called from the debugger and the debugger was entered with interrupts disabled. Fixed preservation of initial screen and now-bogus comment about it. It was broken by setting the initial scr_buf to `buffer' instead of Crtat. `buffer' was full of nulls and the first scroll cleared everything above the things written through syscons. Submitted by: bruce (bde@freebsd.org)
1996-10-26 20:16:58 +00:00
#define SCGETC_CN 1
#define SCGETC_NONBLOCK 2
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
static void sccnupdate(scr_stat *scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static scr_stat *alloc_scp(sc_softc_t *sc, int vty);
static void init_scp(sc_softc_t *sc, int vty, scr_stat *scp);
Fixed the type of timeout functions and removed casts that hid the type mismatches. Not taking an arg in scrn_timer() broke `cc -mrtd'.
1997-04-20 16:05:33 +00:00
static timeout_t scrn_timer;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static int and_region(int *s1, int *e1, int s2, int e2);
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
static void scrn_update(scr_stat *scp, int show_cursor);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static int scsplash_callback(int event, void *arg);
static void scsplash_saver(sc_softc_t *sc, int show);
static int add_scrn_saver(void (*this_saver)(sc_softc_t *, int));
static int remove_scrn_saver(void (*this_saver)(sc_softc_t *, int));
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int set_scrn_saver_mode(scr_stat *scp, int mode, u_char *pal, int border);
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
static int restore_scrn_saver_mode(scr_stat *scp, int changemode);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static void stop_scrn_saver(sc_softc_t *sc, void (*saver)(sc_softc_t *, int));
static int wait_scrn_saver_stop(sc_softc_t *sc);
Get conditional compilation right so that unnecessary reference to splash-relatec call won't be made if there is no splash pseudo device.
1999-01-13 01:14:26 +00:00
#define scsplash_stick(stick) (sticky_splash = (stick))
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#else /* !DEV_SPLASH */
Get conditional compilation right so that unnecessary reference to splash-relatec call won't be made if there is no splash pseudo device.
1999-01-13 01:14:26 +00:00
#define scsplash_stick(stick)
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif /* DEV_SPLASH */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static int do_switch_scr(sc_softc_t *sc, int s);
static int vt_proc_alive(scr_stat *scp);
static int signal_vt_rel(scr_stat *scp);
static int signal_vt_acq(scr_stat *scp);
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
static int finish_vt_rel(scr_stat *scp, int release, int *s);
static int finish_vt_acq(scr_stat *scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static void exchange_scr(sc_softc_t *sc);
static void update_cursor_image(scr_stat *scp);
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
static void change_cursor_shape(scr_stat *scp, int flags, int base, int height);
Reload font when syscons(4) is resuming without switching mode. Reported by: adrian (more than a year ago) Prodded by: adrian (less than a month ago)
2013-07-17 23:29:56 +00:00
static void update_font(scr_stat *);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int save_kbd_state(scr_stat *scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static int update_kbd_state(scr_stat *scp, int state, int mask);
static int update_kbd_leds(scr_stat *scp, int which);
Fixed the type of timeout functions and removed casts that hid the type mismatches. Not taking an arg in scrn_timer() broke `cc -mrtd'.
1997-04-20 16:05:33 +00:00
static timeout_t blink_screen;
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
static struct tty *sc_alloc_tty(int, int);
Moved declarations of static functions to the correct file. This fixes hundreds of warnings from -Wunused in lkm/syscons/*.
1996-06-23 17:12:05 +00:00
Convert to new console api
2006-05-26 13:54:27 +00:00
static cn_probe_t sc_cnprobe;
static cn_init_t sc_cninit;
static cn_term_t sc_cnterm;
static cn_getc_t sc_cngetc;
static cn_putc_t sc_cnputc;
kern cons: introduce infrastructure for console grabbing by kernel At the moment grab and ungrab methods of all console drivers are no-ops. Current intended meaning of the calls is that the kernel takes control of console input. In the future the semantics may be extended to mean that the calling thread takes full ownership of the console (e.g. console output from other threads could be suspended). Inspired by: bde MFC after: 2 months
2011-12-17 15:08:43 +00:00
static cn_grab_t sc_cngrab;
static cn_ungrab_t sc_cnungrab;
Remove a hard-coded table of kernel console I/O functions exported from sc, vt and sio drivers. Use instead a linker_set to collect them. Staticize ??cngetc(), ??cnputc(), etc functions in sc and vt drivers. We must still have siocngetc() and siocnputc() as globals because they are directly referred to by i386-gdbstub.c :-( Oked by: bde
1999-01-07 14:14:24 +00:00
Convert to new console api
2006-05-26 13:54:27 +00:00
CONSOLE_DRIVER(sc);
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
static tsw_open_t sctty_open;
static tsw_close_t sctty_close;
static tsw_outwakeup_t sctty_outwakeup;
static tsw_ioctl_t sctty_ioctl;
static tsw_mmap_t sctty_mmap;
static struct ttydevsw sc_ttydevsw = {
.tsw_open = sctty_open,
.tsw_close = sctty_close,
.tsw_outwakeup = sctty_outwakeup,
.tsw_ioctl = sctty_ioctl,
.tsw_mmap = sctty_mmap,
Added D_TTY to the cdevswitch flags for all tty drivers. This is required for the Lite2 fix for always returning EIO in dead_read(). Cleaned up the cdevswitch initializers for all tty drivers. Removed explicit calls to ttsetwater() from all (tty) drivers. ttsetwater() is now called centrally for opens, not just for parameter changes.
1998-08-23 08:26:42 +00:00
};
Make pcvt and syscons live in the same kernel. If both are enabled, then the first one in the config has priority. They can be switched using userconfig(). i386/i386/conf.c: Initialize the shared syscons/pcvt cdevsw entry to `nx'. Add cdevsw registration functions. Use devsw functions of the correct type if they exist. i386/i386/cons.c: Add renamed syscons entry points to constab. i386/i386/cons.h: Declare the renamed syscons entry points. i386/i386/machdep.c: Repeat console initialization after userconfig() in case the current console has become wrong. This depends on cn functions not wiring down anything important. sys/conf.h: Declare new functions. i386/isa/isa.[ch]: Add a function to decide which display driver has priority. Should be done better. i386/isa/syscons.c: Rename pccn* -> sccn*. Initialize CRTC start address in case the previous driver has moved it. i386/isa/syscons.c, i386/isa/pcvt/* Initialize the bogusly shared variable Crtat dynamically in case the stored value was changed by the previous driver. Initialize cdevsw table from a template. Don't grab the console if another display driver has priority. i386/isa/syscons.h, i386/isa/pcvt/pcvt_hdr.h: Don't externally declare now-static cdevsw functions. i386/isa/pcvt/pcvt_hdr.h: Set the sensitive hardware flag so that pcvt doesn't always have lower priority than syscons. This also fixes the "stupid" detection of the display after filling the display with text. i386/isa/pcvt/pcvt_out.c: Don't be confused the off-screen cursor offset 0xffff set by syscons. kern/subr_xxx.c: Add enough nxio/nodev/null devsw functions of the correct type for syscons and pcvt.
1995-09-10 21:36:12 +00:00
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
static d_ioctl_t consolectl_ioctl;
Make sure that all mouse buttons are released when clients using /dev/consolectl close. This fixes a problem where if a USB mouse is detached while a button is pressed, that button is never released. MFC after: 1 week
2013-02-06 11:16:18 +00:00
static d_close_t consolectl_close;
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
static struct cdevsw consolectl_devsw = {
.d_version = D_VERSION,
Make sure that all mouse buttons are released when clients using /dev/consolectl close. This fixes a problem where if a USB mouse is detached while a button is pressed, that button is never released. MFC after: 1 week
2013-02-06 11:16:18 +00:00
.d_flags = D_NEEDGIANT | D_TRACKCLOSE,
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
.d_ioctl = consolectl_ioctl,
Make sure that all mouse buttons are released when clients using /dev/consolectl close. This fixes a problem where if a USB mouse is detached while a button is pressed, that button is never released. MFC after: 1 week
2013-02-06 11:16:18 +00:00
.d_close = consolectl_close,
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
.d_name = "consolectl",
};
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
int
sc_probe_unit(int unit, int flags)
The syscons driver doesn't really check the presence of the display adapter during the system boot. It always assumes there is at least a monochrome adapter. This is rather strange assumption. If there is no dispaly adapter, the console driver cannot be any good... In this patch, scinit() is split into two parts; the first part is now called scvidprobe() which will detect the presence of video card at the CGA or MONO buffer address and returns TRUE if found. It is called during sccnprobe() and scprobe(). Both will fail if no video card is found. The second part, whose name stays the same as before, scinit(), is called from sccninit() and scattach() to complete initialization of the found video card. The keyboard probe code is moved from scprobe() to sckbdprobe(); scprobe() now calls scvidprobe() and sckbdprobe() to carry out device probe. (This is rather a cosmetic change, but it sure makes the code look better organized.) The problem pointed out by Joerg.
1997-06-22 12:04:36 +00:00
{
Use a common tunable to choose between vt(4)/sc(4) With this change and previous work from ray@ it will be possible to put both in GENERIC, and have one enabled by default, but allow the other to be selected via the loader. (The previous implementation had separate kern.vt.disable and hw.syscons.disable tunables, and would panic if both drivers were compiled in and neither was explicitly disabled.) MFC after: 1 week Sponsored by: The FreeBSD Foundation
2014-06-27 17:50:33 +00:00
if (!vty_enabled(VTY_SC))
return ENXIO;
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
if (!scvidprobe(unit, flags, FALSE)) {
The syscons driver doesn't really check the presence of the display adapter during the system boot. It always assumes there is at least a monochrome adapter. This is rather strange assumption. If there is no dispaly adapter, the console driver cannot be any good... In this patch, scinit() is split into two parts; the first part is now called scvidprobe() which will detect the presence of video card at the CGA or MONO buffer address and returns TRUE if found. It is called during sccnprobe() and scprobe(). Both will fail if no video card is found. The second part, whose name stays the same as before, scinit(), is called from sccninit() and scattach() to complete initialization of the found video card. The keyboard probe code is moved from scprobe() to sckbdprobe(); scprobe() now calls scvidprobe() and sckbdprobe() to carry out device probe. (This is rather a cosmetic change, but it sure makes the code look better organized.) The problem pointed out by Joerg.
1997-06-22 12:04:36 +00:00
if (bootverbose)
- Not every architecture defaults to a black background (e.g. sparc64 uses white) so base the color of the border on SC_NORM_ATTR rather than hardcoding BG_BLACK. - Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
printf("%s%d: no video adapter found.\n", SC_DRIVER_NAME, unit);
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
return ENXIO;
The syscons driver doesn't really check the presence of the display adapter during the system boot. It always assumes there is at least a monochrome adapter. This is rather strange assumption. If there is no dispaly adapter, the console driver cannot be any good... In this patch, scinit() is split into two parts; the first part is now called scvidprobe() which will detect the presence of video card at the CGA or MONO buffer address and returns TRUE if found. It is called during sccnprobe() and scprobe(). Both will fail if no video card is found. The second part, whose name stays the same as before, scinit(), is called from sccninit() and scattach() to complete initialization of the found video card. The keyboard probe code is moved from scprobe() to sckbdprobe(); scprobe() now calls scvidprobe() and sckbdprobe() to carry out device probe. (This is rather a cosmetic change, but it sure makes the code look better organized.) The problem pointed out by Joerg.
1997-06-22 12:04:36 +00:00
}
Fix and update for VESA BIOS support in syscons. - Handle pixel (raster text) mode properly. - Clear screen and paint border right. - Paint text attribute (colors). - Fix off-by-one errors. - Add some sanity checks. - Fix some function prototypes. - Add some comment lines. - Define generic text mode numbers so that the user can just give "80x25", "80x60", "132x25"..., rather than "VGA_xxx", to `vidcontrol' to change the current video mode. `vidoio.c' and `vesa.c' will map these numbers to real video mode numbers appropriate and available with the given video hardware. I believe this will be useful to make syscons more portable across archtectures.
1998-09-23 09:59:00 +00:00
- Clear relevant variables when the keyboard is not available. - Do not touch the `tty' struct when it's not yet available. - Initialize correct bits in `fonts_loaded'.
1999-07-18 06:16:53 +00:00
/* syscons will be attached even when there is no keyboard */
sckbdprobe(unit, flags, FALSE);
return 0;
The syscons driver doesn't really check the presence of the display adapter during the system boot. It always assumes there is at least a monochrome adapter. This is rather strange assumption. If there is no dispaly adapter, the console driver cannot be any good... In this patch, scinit() is split into two parts; the first part is now called scvidprobe() which will detect the presence of video card at the CGA or MONO buffer address and returns TRUE if found. It is called during sccnprobe() and scprobe(). Both will fail if no video card is found. The second part, whose name stays the same as before, scinit(), is called from sccninit() and scattach() to complete initialization of the found video card. The keyboard probe code is moved from scprobe() to sckbdprobe(); scprobe() now calls scvidprobe() and sckbdprobe() to carry out device probe. (This is rather a cosmetic change, but it sure makes the code look better organized.) The problem pointed out by Joerg.
1997-06-22 12:04:36 +00:00
}
/* probe video adapters, return TRUE if found */
static int
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scvidprobe(int unit, int flags, int cons)
The syscons driver doesn't really check the presence of the display adapter during the system boot. It always assumes there is at least a monochrome adapter. This is rather strange assumption. If there is no dispaly adapter, the console driver cannot be any good... In this patch, scinit() is split into two parts; the first part is now called scvidprobe() which will detect the presence of video card at the CGA or MONO buffer address and returns TRUE if found. It is called during sccnprobe() and scprobe(). Both will fail if no video card is found. The second part, whose name stays the same as before, scinit(), is called from sccninit() and scattach() to complete initialization of the found video card. The keyboard probe code is moved from scprobe() to sckbdprobe(); scprobe() now calls scvidprobe() and sckbdprobe() to carry out device probe. (This is rather a cosmetic change, but it sure makes the code look better organized.) The problem pointed out by Joerg.
1997-06-22 12:04:36 +00:00
{
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/*
* Access the video adapter driver through the back door!
* Video adapter drivers need to be configured before syscons.
* However, when syscons is being probed as the low-level console,
* they have not been initialized yet. We force them to initialize
* themselves here. XXX
*/
vid_configure(cons ? VIO_PROBE_ONLY : 0);
The syscons driver doesn't really check the presence of the display adapter during the system boot. It always assumes there is at least a monochrome adapter. This is rather strange assumption. If there is no dispaly adapter, the console driver cannot be any good... In this patch, scinit() is split into two parts; the first part is now called scvidprobe() which will detect the presence of video card at the CGA or MONO buffer address and returns TRUE if found. It is called during sccnprobe() and scprobe(). Both will fail if no video card is found. The second part, whose name stays the same as before, scinit(), is called from sccninit() and scattach() to complete initialization of the found video card. The keyboard probe code is moved from scprobe() to sckbdprobe(); scprobe() now calls scvidprobe() and sckbdprobe() to carry out device probe. (This is rather a cosmetic change, but it sure makes the code look better organized.) The problem pointed out by Joerg.
1997-06-22 12:04:36 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return (vid_find_adapter("*", unit) >= 0);
The syscons driver doesn't really check the presence of the display adapter during the system boot. It always assumes there is at least a monochrome adapter. This is rather strange assumption. If there is no dispaly adapter, the console driver cannot be any good... In this patch, scinit() is split into two parts; the first part is now called scvidprobe() which will detect the presence of video card at the CGA or MONO buffer address and returns TRUE if found. It is called during sccnprobe() and scprobe(). Both will fail if no video card is found. The second part, whose name stays the same as before, scinit(), is called from sccninit() and scattach() to complete initialization of the found video card. The keyboard probe code is moved from scprobe() to sckbdprobe(); scprobe() now calls scvidprobe() and sckbdprobe() to carry out device probe. (This is rather a cosmetic change, but it sure makes the code look better organized.) The problem pointed out by Joerg.
1997-06-22 12:04:36 +00:00
}
/* probe the keyboard, return TRUE if found */
static int
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
sckbdprobe(int unit, int flags, int cons)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* access the keyboard driver through the backdoor! */
kbd_configure(cons ? KB_CONF_PROBE_ONLY : 0);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return (kbd_find_keyboard("*", unit) >= 0);
}
static char
*adapter_name(video_adapter_t *adp)
{
static struct {
int type;
char *name[2];
} names[] = {
{ KD_MONO, { "MDA", "MDA" } },
{ KD_HERCULES, { "Hercules", "Hercules" } },
{ KD_CGA, { "CGA", "CGA" } },
{ KD_EGA, { "EGA", "EGA (mono)" } },
{ KD_VGA, { "VGA", "VGA (mono)" } },
{ KD_PC98, { "PC-98x1", "PC-98x1" } },
{ KD_TGA, { "TGA", "TGA" } },
{ -1, { "Unknown", "Unknown" } },
};
int i;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
for (i = 0; names[i].type != -1; ++i)
if (names[i].type == adp->va_type)
break;
return names[i].name[(adp->va_flags & V_ADP_COLOR) ? 0 : 1];
scresume erroneously used before declared. Move the function rather than add another APM ifdef just for the forward decl. [Boy, sure a lot of warnings in here!]
1996-10-03 00:42:27 +00:00
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
static void
sctty_outwakeup(struct tty *tp)
{
size_t len;
u_char buf[PCBURST];
scr_stat *scp = sc_get_stat(tp);
if (scp->status & SLKED ||
(scp == scp->sc->cur_scp && scp->sc->blink_in_progress))
return;
for (;;) {
len = ttydisc_getc(tp, buf, sizeof buf);
if (len == 0)
break;
Make a 1:1 mapping between syscons stats and terminal emulators. After I imported libteken into the source tree, I noticed syscons didn't store the cursor position inside the terminal emulator, but inside the virtual terminal stat. This is not very useful, because when you implement more complex forms of line wrapping, you need to keep track of more state than just the cursor position. Because the kernel messages didn't share the same terminal emulator as ttyv0, this caused a lot of strange things, like kernel messages being misplaced and a missing notification to resize the terminal emulator for kernel messages never to be resized when using vidcontrol. This patch just removes kernel_console_ts and adds a special parameter to te_puts to determine whether messages should be printed using regular colors or the ones for kernel messages. Reported by: ache Tested by: nyan, garga (older version)
2009-03-10 11:28:54 +00:00
sc_puts(scp, buf, len, 0);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
}
}
Add new function ttyinitmode() which sets our systemwide default modes on a tty structure. Both the ".init" and the current settings are initialized allowing the function to be used both at attach and open time. The function takes an argument to decide if echoing should be enabled. Echoing should not be enabled for regular physical serial ports unless they are consoles, in which case they should be configured by ttyconsolemode() instead. Use the new function throughout.
2004-10-18 21:51:27 +00:00
static struct tty *
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
sc_alloc_tty(int index, int devnum)
Add new function ttyinitmode() which sets our systemwide default modes on a tty structure. Both the ".init" and the current settings are initialized allowing the function to be used both at attach and open time. The function takes an argument to decide if echoing should be enabled. Echoing should not be enabled for regular physical serial ports unless they are consoles, in which case they should be configured by ttyconsolemode() instead. Use the new function throughout.
2004-10-18 21:51:27 +00:00
{
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
struct sc_ttysoftc *stc;
Add new function ttyinitmode() which sets our systemwide default modes on a tty structure. Both the ".init" and the current settings are initialized allowing the function to be used both at attach and open time. The function takes an argument to decide if echoing should be enabled. Echoing should not be enabled for regular physical serial ports unless they are consoles, in which case they should be configured by ttyconsolemode() instead. Use the new function throughout.
2004-10-18 21:51:27 +00:00
struct tty *tp;
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
/* Allocate TTY object and softc to store unit number. */
stc = malloc(sizeof(struct sc_ttysoftc), M_DEVBUF, M_WAITOK);
stc->st_index = index;
stc->st_stat = NULL;
Last minute TTY API change: remove mutex argument from tty_alloc(). I don't want people to override the mutex when allocating a TTY. It has to be there, to keep drivers like syscons happy. So I'm creating a tty_alloc_mutex() which can be used in those cases. tty_alloc_mutex() should eventually be removed. The advantage of this approach, is that we can just remove a function, without breaking the regular API in the future.
2009-05-29 06:41:23 +00:00
tp = tty_alloc_mutex(&sc_ttydevsw, stc, &Giant);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
/* Create device node. */
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
tty_makedev(tp, NULL, "v%r", devnum);
Add new function ttyinitmode() which sets our systemwide default modes on a tty structure. Both the ".init" and the current settings are initialized allowing the function to be used both at attach and open time. The function takes an argument to decide if echoing should be enabled. Echoing should not be enabled for regular physical serial ports unless they are consoles, in which case they should be configured by ttyconsolemode() instead. Use the new function throughout.
2004-10-18 21:51:27 +00:00
return (tp);
}
Search for default 800x600 graphics mode from supported VESA mode list. Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
#ifdef SC_PIXEL_MODE
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
static void
sc_set_vesa_mode(scr_stat *scp, sc_softc_t *sc, int unit)
Search for default 800x600 graphics mode from supported VESA mode list. Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
{
video_info_t info;
Honor font size for the video mode when default fonts are compiled in kernel and VESA mode is enabled from loader.
2010-11-29 22:19:19 +00:00
u_char *font;
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
int depth;
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
int fontsize;
Search for default 800x600 graphics mode from supported VESA mode list. Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
int i;
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
int vmode;
Search for default 800x600 graphics mode from supported VESA mode list. Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
vmode = 0;
(void)resource_int_value("sc", unit, "vesa_mode", &vmode);
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
if (vmode < M_VESA_BASE || vmode > M_VESA_MODE_MAX ||
vidd_get_info(sc->adp, vmode, &info) != 0 ||
!sc_support_pixel_mode(&info))
vmode = 0;
Search for default 800x600 graphics mode from supported VESA mode list. Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
/*
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
* If the mode is unset or unsupported, search for an available
Search for default 800x600 graphics mode from supported VESA mode list. Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
* 800x600 graphics mode with the highest color depth.
*/
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
if (vmode == 0) {
for (depth = 0, i = M_VESA_BASE; i <= M_VESA_MODE_MAX; i++)
if (vidd_get_info(sc->adp, i, &info) == 0 &&
info.vi_width == 800 && info.vi_height == 600 &&
sc_support_pixel_mode(&info) &&
info.vi_depth > depth) {
vmode = i;
depth = info.vi_depth;
}
if (vmode == 0)
return;
vidd_get_info(sc->adp, vmode, &info);
Search for default 800x600 graphics mode from supported VESA mode list. Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
}
Honor font size for the video mode when default fonts are compiled in kernel and VESA mode is enabled from loader.
2010-11-29 22:19:19 +00:00
#if !defined(SC_NO_FONT_LOADING) && defined(SC_DFLT_FONT)
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
fontsize = info.vi_cheight;
Honor font size for the video mode when default fonts are compiled in kernel and VESA mode is enabled from loader.
2010-11-29 22:19:19 +00:00
#else
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
fontsize = scp->font_size;
Honor font size for the video mode when default fonts are compiled in kernel and VESA mode is enabled from loader.
2010-11-29 22:19:19 +00:00
#endif
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
if (fontsize < 14)
fontsize = 8;
else if (fontsize >= 16)
fontsize = 16;
Honor font size for the video mode when default fonts are compiled in kernel and VESA mode is enabled from loader.
2010-11-29 22:19:19 +00:00
else
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
fontsize = 14;
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
#ifndef SC_NO_FONT_LOADING
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
switch (fontsize) {
Honor font size for the video mode when default fonts are compiled in kernel and VESA mode is enabled from loader.
2010-11-29 22:19:19 +00:00
case 8:
if ((sc->fonts_loaded & FONT_8) == 0)
return;
font = sc->font_8;
break;
case 14:
if ((sc->fonts_loaded & FONT_14) == 0)
return;
font = sc->font_14;
break;
case 16:
if ((sc->fonts_loaded & FONT_16) == 0)
return;
font = sc->font_16;
break;
}
#else
font = NULL;
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
#endif
#ifdef DEV_SPLASH
if ((sc->flags & SC_SPLASH_SCRN) != 0)
splash_term(sc->adp);
#endif
#ifndef SC_NO_HISTORY
if (scp->history != NULL) {
sc_vtb_append(&scp->vtb, 0, scp->history,
scp->ypos * scp->xsize + scp->xpos);
scp->history_pos = sc_vtb_tail(scp->history);
}
#endif
vidd_set_mode(sc->adp, vmode);
scp->status |= (UNKNOWN_MODE | PIXEL_MODE | MOUSE_HIDDEN);
scp->status &= ~(GRAPHICS_MODE | MOUSE_VISIBLE);
scp->xpixel = info.vi_width;
scp->ypixel = info.vi_height;
scp->xsize = scp->xpixel / 8;
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
scp->ysize = scp->ypixel / fontsize;
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
scp->xpos = 0;
scp->ypos = scp->ysize - 1;
scp->xoff = scp->yoff = 0;
Honor font size for the video mode when default fonts are compiled in kernel and VESA mode is enabled from loader.
2010-11-29 22:19:19 +00:00
scp->font = font;
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
scp->font_size = fontsize;
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
scp->font_width = 8;
scp->start = scp->xsize * scp->ysize - 1;
scp->end = 0;
scp->cursor_pos = scp->cursor_oldpos = scp->xsize * scp->xsize;
scp->mode = sc->initial_mode = vmode;
#ifndef __sparc64__
sc_vtb_init(&scp->scr, VTB_FRAMEBUFFER, scp->xsize, scp->ysize,
(void *)sc->adp->va_window, FALSE);
#endif
sc_alloc_scr_buffer(scp, FALSE, FALSE);
sc_init_emulator(scp, NULL);
#ifndef SC_NO_CUTPASTE
sc_alloc_cut_buffer(scp, FALSE);
#endif
#ifndef SC_NO_HISTORY
sc_alloc_history_buffer(scp, 0, 0, FALSE);
#endif
sc_set_border(scp, scp->border);
sc_set_cursor_image(scp);
scp->status &= ~UNKNOWN_MODE;
#ifdef DEV_SPLASH
if ((sc->flags & SC_SPLASH_SCRN) != 0)
splash_init(sc->adp, scsplash_callback, sc);
#endif
Search for default 800x600 graphics mode from supported VESA mode list. Many video controllers do not support 800x600x24 mode any more.
2009-10-23 18:53:21 +00:00
}
#endif
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
int
sc_attach_unit(int unit, int flags)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_softc_t *sc;
Fixed a couple of bugs in the mousepointer code. Changed update strategy slightly. Make set_mode & copy_font externally visible.
1996-09-01 18:16:06 +00:00
scr_stat *scp;
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
struct cdev *dev;
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
int vc;
Third round in syscons update. Display update method changed, now allways write in memory buffer, then periodically update physical display. Speed improvements (now > 5 times faster than the old syscons). History now circular buffer, with changeable size. History scroll by up/down line, up/down page, home and end. Backtab proberly implemented. Now space for 96 function keys, 63 allocated standard, default now SCO/SYSV compat again as in the old days. New keyboard definition files ~share/syscons/keymaps/* Misc fixes for old "hacks" that broke SCO/SYSV compat. More that I forgot before writing this...
1995-01-28 22:18:05 +00:00
Use a common tunable to choose between vt(4)/sc(4) With this change and previous work from ray@ it will be possible to put both in GENERIC, and have one enabled by default, but allow the other to be selected via the loader. (The previous implementation had separate kern.vt.disable and hw.syscons.disable tunables, and would panic if both drivers were compiled in and neither was explicitly disabled.) MFC after: 1 week Sponsored by: The FreeBSD Foundation
2014-06-27 17:50:33 +00:00
if (!vty_enabled(VTY_SC))
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
flags &= ~SC_KERNEL_CONSOLE;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (sc_console_unit == unit) {
/*
* If this unit is being used as the system console, we need to
* adjust some variables and buffers before and after scinit().
*/
/* assert(sc_console != NULL) */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
flags |= SC_KERNEL_CONSOLE;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
scmeminit(NULL);
}
Make a 1:1 mapping between syscons stats and terminal emulators. After I imported libteken into the source tree, I noticed syscons didn't store the cursor position inside the terminal emulator, but inside the virtual terminal stat. This is not very useful, because when you implement more complex forms of line wrapping, you need to keep track of more state than just the cursor position. Because the kernel messages didn't share the same terminal emulator as ttyv0, this caused a lot of strange things, like kernel messages being misplaced and a missing notification to resize the terminal emulator for kernel messages never to be resized when using vidcontrol. This patch just removes kernel_console_ts and adds a special parameter to te_puts to determine whether messages should be printed using regular colors or the ones for kernel messages. Reported by: ache Tested by: nyan, garga (older version)
2009-03-10 11:28:54 +00:00
scinit(unit, flags);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc = sc_get_softc(unit, flags & SC_KERNEL_CONSOLE);
sc->config = flags;
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
callout_init(&sc->ctimeout, 0);
callout_init(&sc->cblink, 0);
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
scp = sc_get_stat(sc->dev[0]);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc_console == NULL) /* sc_console_unit < 0 */
sc_console = scp;
#ifdef SC_PIXEL_MODE
Improve VESA mode switching via loader tunable `hint.sc.0.vesa_mode'. The most notable change is history buffer is fully saved/restored now.
2010-02-24 20:13:34 +00:00
if ((sc->config & SC_VESAMODE) != 0)
sc_set_vesa_mode(scp, sc, unit);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif /* SC_PIXEL_MODE */
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* initialize cursor */
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
if (!ISGRAPHSC(scp))
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
update_cursor_image(scp);
Allow all characters except "real" control chars. Fix NULL reference when serial console (thanks bruce).
1995-02-03 21:09:44 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
/* get screen update going */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scrn_timer(sc);
Allow all characters except "real" control chars. Fix NULL reference when serial console (thanks bruce).
1995-02-03 21:09:44 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* set up the keyboard */
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(sc->kbd, KDSKBMODE, (caddr_t)&scp->kbd_mode);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
update_kbd_state(scp, scp->status, LOCK_MASK);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
- Not every architecture defaults to a black background (e.g. sparc64 uses white) so base the color of the border on SC_NORM_ATTR rather than hardcoding BG_BLACK. - Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
printf("%s%d: %s <%d virtual consoles, flags=0x%x>\n",
SC_DRIVER_NAME, unit, adapter_name(sc->adp), sc->vtys, sc->config);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (bootverbose) {
- Not every architecture defaults to a black background (e.g. sparc64 uses white) so base the color of the border on SC_NORM_ATTR rather than hardcoding BG_BLACK. - Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
printf("%s%d:", SC_DRIVER_NAME, unit);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->adapter >= 0)
printf(" fb%d", sc->adapter);
if (sc->keyboard >= 0)
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
printf(", kbd%d", sc->keyboard);
if (scp->tsw)
printf(", terminal emulator: %s (%s)",
scp->tsw->te_name, scp->tsw->te_desc);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
printf("\n");
}
Make pcvt and syscons live in the same kernel. If both are enabled, then the first one in the config has priority. They can be switched using userconfig(). i386/i386/conf.c: Initialize the shared syscons/pcvt cdevsw entry to `nx'. Add cdevsw registration functions. Use devsw functions of the correct type if they exist. i386/i386/cons.c: Add renamed syscons entry points to constab. i386/i386/cons.h: Declare the renamed syscons entry points. i386/i386/machdep.c: Repeat console initialization after userconfig() in case the current console has become wrong. This depends on cn functions not wiring down anything important. sys/conf.h: Declare new functions. i386/isa/isa.[ch]: Add a function to decide which display driver has priority. Should be done better. i386/isa/syscons.c: Rename pccn* -> sccn*. Initialize CRTC start address in case the previous driver has moved it. i386/isa/syscons.c, i386/isa/pcvt/* Initialize the bogusly shared variable Crtat dynamically in case the stored value was changed by the previous driver. Initialize cdevsw table from a template. Don't grab the console if another display driver has priority. i386/isa/syscons.h, i386/isa/pcvt/pcvt_hdr.h: Don't externally declare now-static cdevsw functions. i386/isa/pcvt/pcvt_hdr.h: Set the sensitive hardware flag so that pcvt doesn't always have lower priority than syscons. This also fixes the "stupid" detection of the display after filling the display with text. i386/isa/pcvt/pcvt_out.c: Don't be confused the off-screen cursor offset 0xffff set by syscons. kern/subr_xxx.c: Add enough nxio/nodev/null devsw functions of the correct type for syscons and pcvt.
1995-09-10 21:36:12 +00:00
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
/* Register suspend/resume/shutdown callbacks for the kernel console. */
if (sc_console_unit == unit) {
EVENTHANDLER_REGISTER(power_suspend, scsuspend, NULL,
EVENTHANDLER_PRI_ANY);
EVENTHANDLER_REGISTER(power_resume, scresume, NULL,
EVENTHANDLER_PRI_ANY);
EVENTHANDLER_REGISTER(shutdown_pre_sync, scshutdown, NULL,
SHUTDOWN_PRI_DEFAULT);
}
- When the system is shut down, switch to the vty0 if possible. - Don't try to ring bell when system is going down. Beacuse the clock code is about to be stopped, the timeout routine won't be called anymore.
1998-08-03 09:18:58 +00:00
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
for (vc = 0; vc < sc->vtys; vc++) {
Try again to get rid of makedev().
2004-02-14 17:56:59 +00:00
if (sc->dev[vc] == NULL) {
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
sc->dev[vc] = sc_alloc_tty(vc, vc + unit * MAXCONS);
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
if (vc == 0 && sc->dev == main_devs)
SC_STAT(sc->dev[0]) = &main_console;
Try again to get rid of makedev().
2004-02-14 17:56:59 +00:00
}
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
/*
* The first vty already has struct tty and scr_stat initialized
* in scinit(). The other vtys will have these structs when
* first opened.
*/
register tty devices so they will look right in pstat.
1999-08-08 21:35:17 +00:00
}
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
dev = make_dev(&consolectl_devsw, 0, UID_ROOT, GID_WHEEL, 0600,
"consolectl");
dev->si_drv1 = sc->dev[0];
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return 0;
}
static void
scmeminit(void *arg)
{
Use a common tunable to choose between vt(4)/sc(4) With this change and previous work from ray@ it will be possible to put both in GENERIC, and have one enabled by default, but allow the other to be selected via the loader. (The previous implementation had separate kern.vt.disable and hw.syscons.disable tunables, and would panic if both drivers were compiled in and neither was explicitly disabled.) MFC after: 1 week Sponsored by: The FreeBSD Foundation
2014-06-27 17:50:33 +00:00
if (!vty_enabled(VTY_SC))
return;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc_malloc)
return;
sc_malloc = TRUE;
/*
* As soon as malloc() becomes functional, we had better allocate
* various buffers for the kernel console.
*/
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (sc_console_unit < 0) /* sc_console == NULL */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return;
/* copy the temporary buffer to the final buffer */
sc_alloc_scr_buffer(sc_console, FALSE, FALSE);
#ifndef SC_NO_CUTPASTE
Fix dependencies between kernel options: - When both SC_PIXEL_MODE and SC_NO_FONT_LOADING are defined, quietly drop SC_NO_FONT_LOADING, because the pixel(raster) console requires font. - When SC_NO_FONT_LOADING is defined, force SC_ALT_MOUSE_IMAGE. Without font, the arrow-shaped mouse cursor cannot be drawn. - Fiddle and simplify some internal macros. MFC after: 2 weeks
2001-07-10 14:13:34 +00:00
sc_alloc_cut_buffer(sc_console, FALSE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
#ifndef SC_NO_HISTORY
/* initialize history buffer & pointers */
- Fixed memory leak in sc_alloc_history_buffer(). - Correctly observe the variable `extra_history_size' when changing the size of history (scroll back) buffer. - Added sc_free_history_buffer(). Pointed out by: des
1999-07-07 13:48:50 +00:00
sc_alloc_history_buffer(sc_console, 0, 0, FALSE);
Moved the initialization of the devfs devices to after the initialization of the devswitch so that it actually works.
1996-03-27 19:11:41 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
/* XXX */
SYSINIT(sc_mem, SI_SUB_KMEM, SI_ORDER_ANY, scmeminit, NULL);
static int
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
scdevtounit(struct tty *tp)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
{
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
int vty = SC_VTY(tp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (vty == SC_CONSOLECTL)
return ((sc_console != NULL) ? sc_console->sc->unit : -1);
else if ((vty < 0) || (vty >= MAXCONS*sc_max_unit()))
return -1;
else
return vty/MAXCONS;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Be consistent about "static" functions: if the function is marked static in its prototype, mark it static at the definition too. Inspired by: FlexeLint warning #512
2002-09-28 17:15:38 +00:00
static int
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
sctty_open(struct tty *tp)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
int unit = scdevtounit(tp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_softc_t *sc;
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
scr_stat *scp;
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#ifndef __sparc64__
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
keyarg_t key;
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
Remove debug printout of major/minor numbers, print name instead.
2005-02-27 21:16:26 +00:00
DPRINTF(5, ("scopen: dev:%s, unit:%d, vty:%d\n",
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
devtoname(tp->t_dev), unit, SC_VTY(tp)));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc = sc_get_softc(unit, (sc_console_unit == unit) ? SC_KERNEL_CONSOLE : 0);
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
if (sc == NULL)
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
if (!tty_opened(tp)) {
Make the default VERASE key the <-- key and remove root's `stty's. 'nuff said. Inventor: joerg@FreeBSD.org Reviewer: sos@FreeBSD.org
1997-04-03 21:42:42 +00:00
/* Use the current setting of the <-- key as default VERASE. */
/* If the Delete key is preferable, an stty is necessary */
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#ifndef __sparc64__
Test "sc->kbd != NULL" rather than "sc != NULL" before accessing the keyboard in scopen(). MFC after: 2 weeks
2001-06-29 06:42:39 +00:00
if (sc->kbd != NULL) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
key.keynum = KEYCODE_BS;
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(sc->kbd, GIO_KEYMAPENT, (caddr_t)&key);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tp->t_termios.c_cc[VERASE] = key.key.map[0];
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#endif
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
}
Fill in tp->t_windowsize AFTER the call to (*linesw[tp->t_line].l_open)(), rather than BEFORE the call. Otherwise the structure will be `zero'ed out by l_open, which actually is ttyopen(), if !TS_OPEN. PR: kern/12420
1999-06-29 17:30:33 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
scp = sc_get_stat(tp);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (scp == NULL) {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
scp = SC_STAT(tp) = alloc_scp(sc, SC_VTY(tp));
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (ISGRAPHSC(scp))
Extend the usage of sc(4)'s hint variable 'flag'. Bit 0x80 now means "set vesa mode" and higher 16bits of the flag would be the desired mode. One can now set, for instance, hint.sc.0.flags=0x01680180, which means that the system should set VESA mode 0x168 upon boot. Submitted by: paradox <ddkprog yahoo com>, swell k at gmail.com with some minor changes.
2009-09-11 02:07:24 +00:00
sc_set_pixel_mode(scp, NULL, 0, 0, 16, 8);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
}
if (!tp->t_winsize.ws_col && !tp->t_winsize.ws_row) {
tp->t_winsize.ws_col = scp->xsize;
tp->t_winsize.ws_row = scp->ysize;
Corrected the setting of winsize on open(). Problem pointed out by David Nugent - davidn@blaze.net.au.
1996-10-15 20:27:07 +00:00
}
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
return (0);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
static void
sctty_close(struct tty *tp)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
scr_stat *scp;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
int s;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
if (SC_VTY(tp) != SC_CONSOLECTL) {
scp = sc_get_stat(tp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* were we in the middle of the VT switching process? */
DPRINTF(5, ("sc%d: scclose(), ", scp->sc->unit));
s = spltty();
if ((scp == scp->sc->cur_scp) && (scp->sc->unit == sc_console_unit))
Eliminate global cons_unavailable flag and replace it by the status bit maintained on a per-device basis. Single variable is inadequate on machines running with multiple consoles enabled.
2004-02-05 01:56:43 +00:00
cnavailable(sc_consptr, TRUE);
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if (finish_vt_rel(scp, TRUE, &s) == 0) /* force release */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("reset WAIT_REL, "));
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if (finish_vt_acq(scp) == 0) /* force acknowledge */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("reset WAIT_ACQ, "));
Fix -Wundef.
2005-12-04 02:12:43 +00:00
#ifdef not_yet_done
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
if (scp == &main_console) {
scp->pid = 0;
scp->proc = NULL;
scp->smode.mode = VT_AUTO;
}
else {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_vtb_destroy(&scp->vtb);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#ifndef __sparc64__
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_vtb_destroy(&scp->scr);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#endif
- Fixed memory leak in sc_alloc_history_buffer(). - Correctly observe the variable `extra_history_size' when changing the size of history (scroll back) buffer. - Added sc_free_history_buffer(). Pointed out by: des
1999-07-07 13:48:50 +00:00
sc_free_history_buffer(scp, scp->ysize);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
SC_STAT(tp) = NULL;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
free(scp, M_DEVBUF);
}
Third round in syscons update. Display update method changed, now allways write in memory buffer, then periodically update physical display. Speed improvements (now > 5 times faster than the old syscons). History now circular buffer, with changeable size. History scroll by up/down line, up/down page, home and end. Backtab proberly implemented. Now space for 96 function keys, 63 allocated standard, default now SCO/SYSV compat again as in the old days. New keyboard definition files ~share/syscons/keymaps/* Misc fixes for old "hacks" that broke SCO/SYSV compat. More that I forgot before writing this...
1995-01-28 22:18:05 +00:00
#else
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
scp->pid = 0;
scp->proc = NULL;
scp->smode.mode = VT_AUTO;
Second round in syscons update: Support for pseudo graphic mouse cursor (not complete yet) Some cheap speed fixes. More cleanups. Call ourselves scxxxx finally.
1995-01-20 08:35:32 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->kbd_mode = K_XLATE;
if (scp == scp->sc->cur_scp)
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(scp->sc->kbd, KDSKBMODE, (caddr_t)&scp->kbd_mode);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("done.\n"));
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
#if 0 /* XXX mpsafetty: fix screensaver. What about outwakeup? */
Be consistent about "static" functions: if the function is marked static in its prototype, mark it static at the definition too. Inspired by: FlexeLint warning #512
2002-09-28 17:15:38 +00:00
static int
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
scread(struct cdev *dev, struct uio *uio, int flag)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
When a program launched on the local console exits, the shell will call read() to get the next command, and scread() disables the screensaver. We don't want this behaviour in the sc_saver_keybonly case. Submitted by: Olivier Houchard <doginou@ci0.org>
2002-05-04 15:42:38 +00:00
if (!sc_saver_keyb_only)
sc_touch_scrn_saver();
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
return ttyread(dev, uio, flag);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
#endif
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int
sckbdevent(keyboard_t *thiskbd, int event, void *arg)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_softc_t *sc;
struct tty *cur_tty;
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
int c, error = 0;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
size_t len;
Allow Syscons terminal emulators to provide function key strings. xterm and cons25 have some incompatibilities when it comes to escape sequences for special keys, such as F1 to F12, home, end, etc. Add a new te_fkeystr() that can be used to override the strings. scterm-sck won't do anything with this, but scterm-teken will use teken_get_sequences() to obtain the proper sequence.
2009-11-11 08:20:19 +00:00
const u_char *cp;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc = (sc_softc_t *)arg;
/* assert(thiskbd == sc->kbd) */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
mtx_lock(&Giant);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
switch (event) {
case KBDIO_KEYINPUT:
break;
case KBDIO_UNLOADING:
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->kbd = NULL;
- Clear relevant variables when the keyboard is not available. - Do not touch the `tty' struct when it's not yet available. - Initialize correct bits in `fonts_loaded'.
1999-07-18 06:16:53 +00:00
sc->keyboard = -1;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
kbd_release(thiskbd, (void *)&sc->keyboard);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
goto done;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
default:
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
error = EINVAL;
goto done;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
/*
* Loop while there is still input to get from the keyboard.
* I don't think this is nessesary, and it doesn't fix
* the Xaccel-2.1 keyboard hang, but it can't hurt. XXX
*/
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
while ((c = scgetc(sc, SCGETC_NONBLOCK)) != NOKEY) {
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
cur_tty = SC_DEV(sc, sc->cur_scp->index);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (!tty_opened_ns(cur_tty))
Make syscons(4) use ttyv0 instead of consolectl as its primary window. When I was hacking on uart(4) to make it work with the MPSAFE TTY layer, I noticed there was a difference between the way syscons and uart work with respect to consoles: - The uart(4) driver sets cn_name to the corresponding ttyu%r node, which means init(8) (which opens /dev/console) will have its output redirected to /dev/ttyu%r. After /etc/rc is done, it can spawn a getty on that device node as well. - Syscons used a little different approach. Apart from the /dev/ttyv%r nodes, it creates a /dev/consolectl node. This device node is used by moused and others to deliver their data, but for some reason it also acts as a TTY, which shares its stat structure with ttyv0. This device node is used as a console (run conscontrol). There are a couple advantages of this approach: - Because we use two different TTY's to represent the 0th syscons window, we allocate two sets of TTY buffers. Even if you don't use /dev/consolectl after the system has booted (systems that don't run moused), it seems the buffers are still allocated. - We have to apply an evil hack to redirect input to /dev/consolectl. Because each window (stat) is associated not associated with one TTY, syscons solves this by redirecting all input to closed TTY's to consolectl. This means that opening /dev/ttyv0 while in single user mode will probably cause strange things to happen with respect to keyboard input redirection. The first patch that I discussed with philip@ turned consolectl into a symlink to ttyv0, but this was not a good idea, because in theory we would want consolectl to be a simple device node, which contains all the `privileged' ioctl()'s. Apart from that, it didn't work, because each time /dev/ttyv0 got revoked, moused also lost its descriptor to deliver input, which meant you had to plug out/in your mouse to make it work again. This version just leaves the consolectl device the way it is. It can still be used to write output to ttyv0, but it can no longer receive any input. In my opinion this patch is not a complete solution, but it's already a step in the good direction. It would allow us to turn consolectl into a special (non-TTY) device node in the far future. It shaves off 15 KB of wasted TTY buffer space. Discussed with: philip
2008-08-24 19:50:57 +00:00
continue;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if ((*sc->cur_scp->tsw->te_input)(sc->cur_scp, c, cur_tty))
continue;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
switch (KEYFLAGS(c)) {
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
case 0x0000: /* normal key */
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
ttydisc_rint(cur_tty, KEYCHAR(c), 0);
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
break;
case FKEY: /* function key, return string */
Allow Syscons terminal emulators to provide function key strings. xterm and cons25 have some incompatibilities when it comes to escape sequences for special keys, such as F1 to F12, home, end, etc. Add a new te_fkeystr() that can be used to override the strings. scterm-sck won't do anything with this, but scterm-teken will use teken_get_sequences() to obtain the proper sequence.
2009-11-11 08:20:19 +00:00
cp = (*sc->cur_scp->tsw->te_fkeystr)(sc->cur_scp, c);
if (cp != NULL) {
ttydisc_rint_simple(cur_tty, cp, strlen(cp));
break;
}
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
cp = kbdd_get_fkeystr(thiskbd, KEYCHAR(c), &len);
Just use ttydisc_rint_simple() instead of doing it ourselves. This code seems to do exactly the same as ttydisc_rint_simple() does nowadays. Just remove it. Obtained from: //depot/user/ed/newcons/sys/dev/syscons/syscons.c
2009-09-18 15:39:09 +00:00
if (cp != NULL)
ttydisc_rint_simple(cur_tty, cp, len);
1. Avoid a race in scclose(). tty.c has kludges so that the race is actually harmless. 2. Fixed code to match comment in scintr(). 3. Don't allow even root to take control of the machine when securelevel > 0. I've secured the accesses to PSL_IOPL in all drivers and asked pst to review it, but he seems to be busy. Write access to /dev/kmem and other critival devices currently leaks across raisings of securelevel via open fd's, so there may as well be a similar leak for PSL_IOPL. 4. (Most important.) Don't corrupt memory beyond the screen buffers if the cursor happens to be off the 80x25 screen when syscons starts. 5. Fix console cursor update (not perfect yet). Submitted by: bruce ~
1996-11-11 22:21:03 +00:00
break;
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
case MKEY: /* meta is active, prepend ESC */
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
ttydisc_rint(cur_tty, 0x1b, 0);
ttydisc_rint(cur_tty, KEYCHAR(c), 0);
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
break;
case BKEY: /* backtab fixed sequence (esc [ Z) */
Allow Syscons terminal emulators to provide function key strings. xterm and cons25 have some incompatibilities when it comes to escape sequences for special keys, such as F1 to F12, home, end, etc. Add a new te_fkeystr() that can be used to override the strings. scterm-sck won't do anything with this, but scterm-teken will use teken_get_sequences() to obtain the proper sequence.
2009-11-11 08:20:19 +00:00
ttydisc_rint_simple(cur_tty, "\x1B[Z", 3);
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
ttydisc_rint_done(cur_tty);
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
}
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
sc->cur_scp->status |= MOUSE_HIDDEN;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
done:
mtx_unlock(&Giant);
return (error);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Staticize and cleanup.
1995-12-10 13:40:44 +00:00
static int
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
sctty_ioctl(struct tty *tp, u_long cmd, caddr_t data, struct thread *td)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
Corrected the setting of winsize on open(). Problem pointed out by David Nugent - davidn@blaze.net.au.
1996-10-15 20:27:07 +00:00
int error;
Cosmetic changes: - there were too many global variables (there still are :-). - the data section was bloated by explicit initializations of static variables to 0 (only fixed the recently changed ones). - WRAPHIST() had silly parentheses around foo->bar. - the comment about inline functions was stale. - the comment about Userconfig presumes too much about the boot environment. - `i' was reused confusingly in scioctl(). - the declaration of `butmap' used a deprecated K&R misfeature. - the initializeation of `butmap' had an unnecessary line break. - `unsigned char' was not consistently (mis)spelled as u_char. - English was poor in a comment in videoio.c. Submitted by: bde
1998-09-26 03:38:40 +00:00
int i;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_softc_t *sc;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
scr_stat *scp;
- Add support for the following mice to psm/moused/sysmouse: MS IntelliMouse, Kensington Thinking Mouse, Genius NetScroll, Genius NetMouse, Genius NetMouse Pro, ALPS GlidePoint, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ - The `psm' driver is made to recognize various models of PS/2 mice and enable their extra features so that their additional buttons and wheel/roller are recognized. The name of the detected model will be printed at boot time. - A set of new ioctl functions are added to the `psm', `mse' and `sysmouse' drivers so that the userland program (such as the X server) can query device information and change driver settings. - The wheel/roller movement is handled as the `Z' axis movement by the mouse drivers and the moused daemon. The Z axis movement may be mapped to another axis movement or buttons. - The mouse drivers support a new, standard mouse data format, MOUSE_PROTO_SYSMOUSE format which can encode x, y, and x axis movement and up to 10 buttons. /sys/i386/include/mouse.h - Added some fields to `mousestatus_t' to store Z axis movement and flag bits. - Added the field `model' to `mousehw_t' to store mouse model code. Defined model codes. - Extended `mousemode_t'. - Added new protocols and some constants for them. - Added new ioctl functions and structures. - Removed obsolete ioctl definitions. /sys/i386/include/console.h - Added `dz' field to the structure `mouse_data' to pass Z axis movement to `syscons/sysmouse'. - Removed LEFT_BUTTON, MIDDLE_BUTTON and RIGHT_BUTTON. Use button bits defined in `mouse.h' instead. /sys/i386/isa/psm.c - Added a set of functions to detect various mice which have additional features (wheel and buttons) unavailable in the standard PS/2 mouse. - Refined existing ioctl functions and added new ones. Most important of all is MOUSE_SETLEVEL which manipulates the output level of the driver. While the output level remains zero, the output from the `psm' driver is in the standard PS/2 mouse format (three bytes long). When the level is set to one, the `psm' driver will send data in the extended format. At the level two the driver uses the format which is native to the connected mouse is used. (Meaning that the output from the device is passed to the caller as is, unmodified.) The `psm' driver will pass such extended data format as is to the caller if the output level is two, but emulates the standard format if the output level is zero. - Added kernel configuration flags to set initial resolution (PSM_CONFIG_RESOLUTION) and acceleration (PSM_CONFIG_ACCEL). - Removed the compile options PSM_ACCEL, PSM_CHECKSYNC and PSM_EMULATION. Acceleration ratio is now specified by the kernel configuration flags stated above. Sync check logic is refined and now standard. The sync check can be turned off by the new kernel configuration flags PSM_CONFIG_NOCHECKSYNC (0x100). PSM_EMULATION has been of little use. - Summer clean up :-) Removed unused code and obsolete comments. /sys/i386/isa/mse.c - Created mseioctl() to deal with ioctl functions MOUSE_XXXX. Most importantly, the MOUSE_SETLEVEL ioctl will change the output format from the 5 byte format to the new, extended format so that the caller can take advantage of Z axis movement and additional buttons. - Use constants defined in `mouse.h' rather than magic numbers. /sys/i386/isa/syscons.c - Changed scioctl() to reflect the new `console.h' and some of the new ioctls defined in `mouse.h'. Most importantly, the MOUSE_SETLEVEL ioctl will change the `sysmouse' output format from the MouseSystems 5 byte format to the new, extended format so that the caller can take advantage of Z axis movement and additional buttons. - Added support for double/triple click actions of the left button and single click action of the right button in the virtual console. The left button double click will select a word under the mouse pointer. The triple click will select a line and the single click of the right button will extend the selected region to the current position of the mouse pointer. This will make the cut/paste support more compatible with xterm. /sys/i386/isa/kbdio.h - Added PSM_INTELLI_ID.
1997-12-07 08:09:19 +00:00
int s;
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
int ival;
#endif
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Changed mouse functionality a bit, now the pointer disappears if there is keyboard input. The mousepointer is shown again immediately if moved. Also a function pointer used to install a userwritten extra ioctl handler (sc_user_ioctl). This way its is possible to install user defined videomodes etc etc. No further changes should be in the kernel.
1996-10-18 18:51:37 +00:00
/* If there is a user_ioctl function call that first */
if (sc_user_ioctl) {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
error = (*sc_user_ioctl)(tp, cmd, data, td);
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
if (error != ENOIOCTL)
Changed mouse functionality a bit, now the pointer disappears if there is keyboard input. The mousepointer is shown again immediately if moved. Also a function pointer used to install a userwritten extra ioctl handler (sc_user_ioctl). This way its is possible to install user defined videomodes etc etc. No further changes should be in the kernel.
1996-10-18 18:51:37 +00:00
return error;
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
error = sc_vid_ioctl(tp, cmd, data, td);
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
if (error != ENOIOCTL)
return error;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_HISTORY
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
error = sc_hist_ioctl(tp, cmd, data, td);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (error != ENOIOCTL)
return error;
#endif
#ifndef SC_NO_SYSMOUSE
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
error = sc_mouse_ioctl(tp, cmd, data, td);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (error != ENOIOCTL)
return error;
#endif
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
scp = sc_get_stat(tp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* assert(scp != NULL) */
/* scp is sc_console, if SC_VTY(dev) == SC_CONSOLECTL. */
sc = scp->sc;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (scp->tsw) {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
error = (*scp->tsw->te_ioctl)(scp, tp, cmd, data, td);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (error != ENOIOCTL)
return error;
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
switch (cmd) { /* process console hardware related ioctl's */
Added more SCO compat ioctl's.
1994-10-17 22:12:06 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case GIO_ATTR: /* get current attributes */
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
/* this ioctl is not processed here, but in the terminal emulator */
return ENOTTY;
Added more SCO compat ioctl's.
1994-10-17 22:12:06 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case GIO_COLOR: /* is this a color console ? */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
*(int *)data = (sc->adp->va_flags & V_ADP_COLOR) ? 1 : 0;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added support for many more videomodes, including graphic modes up til 320x200 256col VGA. This is nessesary for the iBCS stuff to work right. (And we get the benefit of more video modes). Uses the videocard BIOS to optain mode tables. Added a "green" saver, switches off the syncs for "green" monitors. Reviewed by: Submitted by: Obtained from:
1994-09-15 07:26:40 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case CONS_BLANKTIME: /* set screen saver timeout (0 = no saver) */
Don't accept the blank time value, if it is too big. PR: bin/6188
1998-08-03 09:15:36 +00:00
if (*(int *)data < 0 || *(int *)data > MAX_BLANKTIME)
1) font loading (two fixes) When an ioctl command SW_XXXX is issued, scioctl() checks if the font appropriate for the specified mode is already loaded. The check was correctly done for 8 line and 16 line fonts, but not for 14 line font. The symbols FONT_8, FONT_14 and FONT_16 were defined as numbers but were sometimes treated as bit flags. They are now defined as bit flags. 2) screen blinking (two fixes) Removed a redundant call to timeout() in do_bell(). Don't let blink_screen() write to the video buffer if the screen is in the graphics (UNKNOWN) mode. 3) screen saver timeout The ioctl command CONS_BLANKTIME sets the screen saver's timeout. The value of zero will disable the screen saver. If the screen saver is currently running it should be stopped. 4) border color and destructive cursor (two fixes) The border color and the cursor type can be changed via escape sequences. But only VGA can change the border color and set the cursor type to destructive (CHAR_CURSOR) in the current syscons. scan_esc() failed to check this. Reviewed by: sos
1997-05-15 05:43:59 +00:00
return EINVAL;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
s = spltty();
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
scrn_blank_time = *(int *)data;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
run_scrn_saver = (scrn_blank_time != 0);
splx(s);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added support for many more videomodes, including graphic modes up til 320x200 256col VGA. This is nessesary for the iBCS stuff to work right. (And we get the benefit of more video modes). Uses the videocard BIOS to optain mode tables. Added a "green" saver, switches off the syncs for "green" monitors. Reviewed by: Submitted by: Obtained from:
1994-09-15 07:26:40 +00:00
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
case CONS_CURSORTYPE: /* set cursor type (obsolete) */
- Fix text cursor logic so that multiple instances of the "normal" cursor won't appear on the screen, and "blinking" and "destructive" cursor won't appear in the vty for which the text cursor is currently hidden. Approved by: jkh
2000-02-11 01:19:44 +00:00
s = spltty();
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
*(int *)data &= CONS_CURSOR_ATTRS;
sc_change_cursor_shape(scp, *(int *)data, -1, -1);
splx(s);
return 0;
case CONS_GETCURSORSHAPE: /* get cursor shape (new interface) */
if (((int *)data)[0] & CONS_LOCAL_CURSOR) {
((int *)data)[0] = scp->curr_curs_attr.flags;
((int *)data)[1] = scp->curr_curs_attr.base;
((int *)data)[2] = scp->curr_curs_attr.height;
} else {
((int *)data)[0] = sc->curs_attr.flags;
((int *)data)[1] = sc->curs_attr.base;
((int *)data)[2] = sc->curs_attr.height;
Fixes annoying behavior and a bug regarding the destructive cursor (CHAR_CURSOR) 1. Reduced the number of calls to set_destructive_cursor(). The destructive cursor produced noticeable overhead on the system. It was caused by draw_cursor_image() calling set_destructive_cursor() every so often. set_destructive_cursor() absolutely needs to be called when a) the character code under the cursor has changed either because the cursor moved or because the screen was updated or the mouse pointer overlapped the cursor. b) Or a new font has been loaded, c) or the video mode has been changed, d) or the cursor shape has been changed, e) or the user switched virtual consoles. 2. Turn off the configuration flag CHAR_CURSOR (destructive cursor) in scattach() if we have a non-VGA card. The destructive cursor works only for VGA. 3. Removed redundant calls to set_destructive_cursor() in some places. 4. Fixed the "disappearing mouse pointer" problem. The mouse pointer looked hidden under the destructive cursor when it overlaped the cursor. A slightly different version of the patch was reviewd and OKed by sos and ache.
1997-06-30 13:31:49 +00:00
}
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
return 0;
case CONS_SETCURSORSHAPE: /* set cursor shape (new interface) */
s = spltty();
sc_change_cursor_shape(scp, ((int *)data)[0],
((int *)data)[1], ((int *)data)[2]);
- Fix text cursor logic so that multiple instances of the "normal" cursor won't appear on the screen, and "blinking" and "destructive" cursor won't appear in the vty for which the text cursor is currently hidden. Approved by: jkh
2000-02-11 01:19:44 +00:00
splx(s);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added support for many more videomodes, including graphic modes up til 320x200 256col VGA. This is nessesary for the iBCS stuff to work right. (And we get the benefit of more video modes). Uses the videocard BIOS to optain mode tables. Added a "green" saver, switches off the syncs for "green" monitors. Reviewed by: Submitted by: Obtained from:
1994-09-15 07:26:40 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case CONS_BELLTYPE: /* set bell type sound/visual */
Replace magic numbers for console bell types with defines.
2006-11-16 12:27:51 +00:00
if ((*(int *)data) & CONS_VISUAL_BELL)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags |= SC_VISUAL_BELL;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
else
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags &= ~SC_VISUAL_BELL;
Replace magic numbers for console bell types with defines.
2006-11-16 12:27:51 +00:00
if ((*(int *)data) & CONS_QUIET_BELL)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags |= SC_QUIET_BELL;
- Add new bell types: "quiet.normal" and "quiet.visual". When bell is of "quiet" types, the console won't ring (or flush) if the ringing process is in a background vty. PR: i386/2853 - Modify the escape sequence 'ESC[=%d;%dB' so that bell pitch and duration are set in hertz and msecs by kbdcontrol(1). There will be a corresponding kbdcontrol patch. PR: bin/6037 Submitted by: Kouichi Hirabayashi (kh@eve.mogami-wire.co.jp)
1998-08-03 09:09:35 +00:00
else
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags &= ~SC_QUIET_BELL;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
First round in syscons update. Several new features has been added: No kernel config options anymore besides keyboard language layout. Virtual consoles are now dynamically allocated, no NCONS anymore. Software cursor blinking/nonblinking. Visual bell for laptops (don't beep at meetings :-). Cursor/bell default type setable via config "flags" instead of as defines. Cursor/bell type setable via ioctl's. New video modes 80x30 80x60 for some laptops, and those with multisync monitors. Scroll-lock history (length currently fixed at 100 lines). Lots of cleanups, some only commented out for now (will goaway soon). Support for new features in vidcontrol/kbdcontrol. Updated manpages.
1995-01-12 11:47:05 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
case CONS_GETINFO: /* get current (virtual) console info */
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
vid_info_t *ptr = (vid_info_t*)data;
if (ptr->size == sizeof(struct vid_info)) {
ptr->m_num = sc->cur_scp->index;
Extend CONS_GETINFO ioctl to provide information about size of the currently displayed font. MFC after: 2 weeks
2002-03-16 23:31:15 +00:00
ptr->font_size = scp->font_size;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
ptr->mv_col = scp->xpos;
ptr->mv_row = scp->ypos;
ptr->mv_csz = scp->xsize;
ptr->mv_rsz = scp->ysize;
1. Allow information about current history size be retrieved using ioctl(2); 2. modify screen dumpung routine, so that in addition to visible area, it allows to grab any portion of history buffer as well.
2002-08-19 16:32:09 +00:00
ptr->mv_hsz = (scp->history != NULL) ? scp->history->vtb_rows : 0;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
/*
* The following fields are filled by the terminal emulator. XXX
*
* ptr->mv_norm.fore
* ptr->mv_norm.back
* ptr->mv_rev.fore
* ptr->mv_rev.back
*/
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
ptr->mv_grfc.fore = 0; /* not supported */
ptr->mv_grfc.back = 0; /* not supported */
ptr->mv_ovscan = scp->border;
if (scp == sc->cur_scp)
save_kbd_state(scp);
ptr->mk_keylock = scp->status & LOCK_MASK;
return 0;
- Add binary compatibility support for obsolete console/mouse ioctls so that existing programs which were compiled before the introduction of the new mouse code and use these ioctls will run unmodified. Suggested by msmith.
1998-01-20 03:37:27 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return EINVAL;
}
- Add binary compatibility support for obsolete console/mouse ioctls so that existing programs which were compiled before the introduction of the new mouse code and use these ioctls will run unmodified. Suggested by msmith.
1998-01-20 03:37:27 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
case CONS_GETVERS: /* get version number */
*(int*)data = 0x200; /* version 2.0 */
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
case CONS_IDLE: /* see if the screen has been idle */
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
/*
* When the screen is in the GRAPHICS_MODE or UNKNOWN_MODE,
* the user process may have been writing something on the
* screen and syscons is not aware of it. Declare the screen
* is NOT idle if it is in one of these modes. But there is
* an exception to it; if a screen saver is running in the
* graphics mode in the current screen, we should say that the
* screen has been idle.
*/
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
*(int *)data = (sc->flags & SC_SCRN_IDLE)
&& (!ISGRAPHSC(sc->cur_scp)
|| (sc->cur_scp->status & SAVER_RUNNING));
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
return 0;
case CONS_SAVERMODE: /* set saver mode */
switch(*(int *)data) {
- Define a convenience macro ISTTYOPEN(). - Slightly refine screen saver logic. No functional change. MFC after: 2 weeks
2001-07-12 11:43:29 +00:00
case CONS_NO_SAVER:
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
case CONS_USR_SAVER:
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
/* if a LKM screen saver is running, stop it first. */
scsplash_stick(FALSE);
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
saver_mode = *(int *)data;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
s = spltty();
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if ((error = wait_scrn_saver_stop(NULL))) {
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
splx(s);
return error;
}
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
run_scrn_saver = TRUE;
- Define a convenience macro ISTTYOPEN(). - Slightly refine screen saver logic. No functional change. MFC after: 2 weeks
2001-07-12 11:43:29 +00:00
if (saver_mode == CONS_USR_SAVER)
scp->status |= SAVER_RUNNING;
else
scp->status &= ~SAVER_RUNNING;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
scsplash_stick(TRUE);
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
splx(s);
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
break;
case CONS_LKM_SAVER:
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
s = spltty();
if ((saver_mode == CONS_USR_SAVER) && (scp->status & SAVER_RUNNING))
scp->status &= ~SAVER_RUNNING;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
saver_mode = *(int *)data;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
splx(s);
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
break;
default:
return EINVAL;
}
return 0;
case CONS_SAVERSTART: /* immediately start/stop the screen saver */
/*
* Note that this ioctl does not guarantee the screen saver
* actually starts or stops. It merely attempts to do so...
*/
s = spltty();
run_scrn_saver = (*(int *)data != 0);
if (run_scrn_saver)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->scrn_time_stamp -= scrn_blank_time;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
splx(s);
return 0;
Add a new ioctl to syscons, CONS_SCRSHOT. Given a userland buffer, it copies out the current contents of the video buffer for a syscons terminal, providing a snapshot of the text and attributes. Based heavily on work originally submitted by Joel Holveck <joelh@gnu.org> for 2.2.x almost 30 months ago, which I cleaned up a little, and forward ported to -current. See also the usr.bin/scrshot utility.
2001-05-18 08:52:56 +00:00
case CONS_SCRSHOT: /* get a screen shot */
{
1. Allow information about current history size be retrieved using ioctl(2); 2. modify screen dumpung routine, so that in addition to visible area, it allows to grab any portion of history buffer as well.
2002-08-19 16:32:09 +00:00
int retval, hist_rsz;
size_t lsize, csize;
vm_offset_t frbp, hstp;
unsigned lnum;
scrshot_t *ptr = (scrshot_t *)data;
void *outp = ptr->buf;
Disallow negative coordinates and sizes in the syscons CONS_SCRSHOT ioctl. Reported by: Christer Oberg <christer.oberg@deprotect.com>
2004-09-29 21:36:07 +00:00
if (ptr->x < 0 || ptr->y < 0 || ptr->xsize < 0 || ptr->ysize < 0)
return EINVAL;
Add a new ioctl to syscons, CONS_SCRSHOT. Given a userland buffer, it copies out the current contents of the video buffer for a syscons terminal, providing a snapshot of the text and attributes. Based heavily on work originally submitted by Joel Holveck <joelh@gnu.org> for 2.2.x almost 30 months ago, which I cleaned up a little, and forward ported to -current. See also the usr.bin/scrshot utility.
2001-05-18 08:52:56 +00:00
s = spltty();
if (ISGRAPHSC(scp)) {
splx(s);
return EOPNOTSUPP;
}
1. Allow information about current history size be retrieved using ioctl(2); 2. modify screen dumpung routine, so that in addition to visible area, it allows to grab any portion of history buffer as well.
2002-08-19 16:32:09 +00:00
hist_rsz = (scp->history != NULL) ? scp->history->vtb_rows : 0;
Disallow negative coordinates and sizes in the syscons CONS_SCRSHOT ioctl. Reported by: Christer Oberg <christer.oberg@deprotect.com>
2004-09-29 21:36:07 +00:00
if (((u_int)ptr->x + ptr->xsize) > scp->xsize ||
((u_int)ptr->y + ptr->ysize) > (scp->ysize + hist_rsz)) {
Add a new ioctl to syscons, CONS_SCRSHOT. Given a userland buffer, it copies out the current contents of the video buffer for a syscons terminal, providing a snapshot of the text and attributes. Based heavily on work originally submitted by Joel Holveck <joelh@gnu.org> for 2.2.x almost 30 months ago, which I cleaned up a little, and forward ported to -current. See also the usr.bin/scrshot utility.
2001-05-18 08:52:56 +00:00
splx(s);
return EINVAL;
}
1. Allow information about current history size be retrieved using ioctl(2); 2. modify screen dumpung routine, so that in addition to visible area, it allows to grab any portion of history buffer as well.
2002-08-19 16:32:09 +00:00
lsize = scp->xsize * sizeof(u_int16_t);
csize = ptr->xsize * sizeof(u_int16_t);
/* Pointer to the last line of framebuffer */
frbp = scp->vtb.vtb_buffer + scp->ysize * lsize + ptr->x *
sizeof(u_int16_t);
/* Pointer to the last line of target buffer */
Avoid casts as lvalues.
2004-07-28 06:30:43 +00:00
outp = (char *)outp + ptr->ysize * csize;
1. Allow information about current history size be retrieved using ioctl(2); 2. modify screen dumpung routine, so that in addition to visible area, it allows to grab any portion of history buffer as well.
2002-08-19 16:32:09 +00:00
/* Pointer to the last line of history buffer */
if (scp->history != NULL)
hstp = scp->history->vtb_buffer + sc_vtb_tail(scp->history) *
sizeof(u_int16_t) + ptr->x * sizeof(u_int16_t);
else
Don't use "NULL" when "0" is really meant.
2002-08-21 23:39:52 +00:00
hstp = 0;
1. Allow information about current history size be retrieved using ioctl(2); 2. modify screen dumpung routine, so that in addition to visible area, it allows to grab any portion of history buffer as well.
2002-08-19 16:32:09 +00:00
retval = 0;
for (lnum = 0; lnum < (ptr->y + ptr->ysize); lnum++) {
if (lnum < scp->ysize) {
frbp -= lsize;
} else {
hstp -= lsize;
if (hstp < scp->history->vtb_buffer)
hstp += scp->history->vtb_rows * lsize;
frbp = hstp;
}
if (lnum < ptr->y)
continue;
Avoid casts as lvalues.
2004-07-28 06:30:43 +00:00
outp = (char *)outp - csize;
1. Allow information about current history size be retrieved using ioctl(2); 2. modify screen dumpung routine, so that in addition to visible area, it allows to grab any portion of history buffer as well.
2002-08-19 16:32:09 +00:00
retval = copyout((void *)frbp, outp, csize);
if (retval != 0)
break;
}
Add a new ioctl to syscons, CONS_SCRSHOT. Given a userland buffer, it copies out the current contents of the video buffer for a syscons terminal, providing a snapshot of the text and attributes. Based heavily on work originally submitted by Joel Holveck <joelh@gnu.org> for 2.2.x almost 30 months ago, which I cleaned up a little, and forward ported to -current. See also the usr.bin/scrshot utility.
2001-05-18 08:52:56 +00:00
splx(s);
1. Allow information about current history size be retrieved using ioctl(2); 2. modify screen dumpung routine, so that in addition to visible area, it allows to grab any portion of history buffer as well.
2002-08-19 16:32:09 +00:00
return retval;
Add a new ioctl to syscons, CONS_SCRSHOT. Given a userland buffer, it copies out the current contents of the video buffer for a syscons terminal, providing a snapshot of the text and attributes. Based heavily on work originally submitted by Joel Holveck <joelh@gnu.org> for 2.2.x almost 30 months ago, which I cleaned up a little, and forward ported to -current. See also the usr.bin/scrshot utility.
2001-05-18 08:52:56 +00:00
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_SETMODE: /* set screen switcher mode */
make sure that the user supplied signals in struct vt_mode are actually valid signals, else return EINVAL for ioctl VT_SETMODE. this fixes a problem that anybody with vty access can panic the system. 2.2-Candidate (and 2.1.0 I believe) Reviewed-by: sos
1997-03-01 23:53:46 +00:00
{
struct vt_mode *mode;
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
struct proc *p1;
make sure that the user supplied signals in struct vt_mode are actually valid signals, else return EINVAL for ioctl VT_SETMODE. this fixes a problem that anybody with vty access can panic the system. 2.2-Candidate (and 2.1.0 I believe) Reviewed-by: sos
1997-03-01 23:53:46 +00:00
mode = (struct vt_mode *)data;
- Not every architecture defaults to a black background (e.g. sparc64 uses white) so base the color of the border on SC_NORM_ATTR rather than hardcoding BG_BLACK. - Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
DPRINTF(5, ("%s%d: VT_SETMODE ", SC_DRIVER_NAME, sc->unit));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->smode.mode == VT_PROCESS) {
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
p1 = pfind(scp->pid);
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (scp->proc == p1 && scp->proc != td->td_proc) {
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
if (p1)
PROC_UNLOCK(p1);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("error EPERM\n"));
return EPERM;
make sure that the user supplied signals in struct vt_mode are actually valid signals, else return EINVAL for ioctl VT_SETMODE. this fixes a problem that anybody with vty access can panic the system. 2.2-Candidate (and 2.1.0 I believe) Reviewed-by: sos
1997-03-01 23:53:46 +00:00
}
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
if (p1)
PROC_UNLOCK(p1);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
s = spltty();
if (mode->mode == VT_AUTO) {
scp->smode.mode = VT_AUTO;
scp->proc = NULL;
scp->pid = 0;
DPRINTF(5, ("VT_AUTO, "));
if ((scp == sc->cur_scp) && (sc->unit == sc_console_unit))
Eliminate global cons_unavailable flag and replace it by the status bit maintained on a per-device basis. Single variable is inadequate on machines running with multiple consoles enabled.
2004-02-05 01:56:43 +00:00
cnavailable(sc_consptr, TRUE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* were we in the middle of the vty switching process? */
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if (finish_vt_rel(scp, TRUE, &s) == 0)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("reset WAIT_REL, "));
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if (finish_vt_acq(scp) == 0)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("reset WAIT_ACQ, "));
} else {
if (!ISSIGVALID(mode->relsig) || !ISSIGVALID(mode->acqsig)
|| !ISSIGVALID(mode->frsig)) {
splx(s);
DPRINTF(5, ("error EINVAL\n"));
return EINVAL;
}
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
DPRINTF(5, ("VT_PROCESS %d, ", td->td_proc->p_pid));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
bcopy(data, &scp->smode, sizeof(struct vt_mode));
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
scp->proc = td->td_proc;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->pid = scp->proc->p_pid;
if ((scp == sc->cur_scp) && (sc->unit == sc_console_unit))
Eliminate global cons_unavailable flag and replace it by the status bit maintained on a per-device basis. Single variable is inadequate on machines running with multiple consoles enabled.
2004-02-05 01:56:43 +00:00
cnavailable(sc_consptr, FALSE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
splx(s);
DPRINTF(5, ("\n"));
return 0;
make sure that the user supplied signals in struct vt_mode are actually valid signals, else return EINVAL for ioctl VT_SETMODE. this fixes a problem that anybody with vty access can panic the system. 2.2-Candidate (and 2.1.0 I believe) Reviewed-by: sos
1997-03-01 23:53:46 +00:00
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_GETMODE: /* get screen switcher mode */
bcopy(&scp->smode, data, sizeof(struct vt_mode));
return 0;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('v', 4):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_RELDISP: /* screen switcher ioctl */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
s = spltty();
/*
* This must be the current vty which is in the VT_PROCESS
* switching mode...
*/
if ((scp != sc->cur_scp) || (scp->smode.mode != VT_PROCESS)) {
splx(s);
return EINVAL;
}
/* ...and this process is controlling it. */
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (scp->proc != td->td_proc) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
splx(s);
return EPERM;
}
error = EINVAL;
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
switch(*(int *)data) {
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_FALSE: /* user refuses to release screen, abort */
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if ((error = finish_vt_rel(scp, FALSE, &s)) == 0)
- Not every architecture defaults to a black background (e.g. sparc64 uses white) so base the color of the border on SC_NORM_ATTR rather than hardcoding BG_BLACK. - Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
DPRINTF(5, ("%s%d: VT_FALSE\n", SC_DRIVER_NAME, sc->unit));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_TRUE: /* user has released screen, go on */
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if ((error = finish_vt_rel(scp, TRUE, &s)) == 0)
- Not every architecture defaults to a black background (e.g. sparc64 uses white) so base the color of the border on SC_NORM_ATTR rather than hardcoding BG_BLACK. - Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
DPRINTF(5, ("%s%d: VT_TRUE\n", SC_DRIVER_NAME, sc->unit));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_ACKACQ: /* acquire acknowledged, switch completed */
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if ((error = finish_vt_acq(scp)) == 0)
- Not every architecture defaults to a black background (e.g. sparc64 uses white) so base the color of the border on SC_NORM_ATTR rather than hardcoding BG_BLACK. - Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
DPRINTF(5, ("%s%d: VT_ACKACQ\n", SC_DRIVER_NAME, sc->unit));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
default:
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
splx(s);
return error;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_OPENQRY: /* return free virtual console */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
for (i = sc->first_vty; i < sc->first_vty + sc->vtys; i++) {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tp = SC_DEV(sc, i);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (!tty_opened_ns(tp)) {
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
*(int *)data = i + 1;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
return 0;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return EINVAL;
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('v', 5):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_ACTIVATE: /* switch to screen *data */
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
i = (*(int *)data == 0) ? scp->index : (*(int *)data - 1);
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
s = spltty();
Check the return code of sc_clean_up() in the only place where it was not checked at all. There is only one case when sc_clean_up() can fail, because of wait_scrn_saver_stop(), but it doesn't hurt to check anyway. Reviewed by: rodrigc Found by: Coverity Prevent
2006-05-12 22:43:07 +00:00
error = sc_clean_up(sc->cur_scp);
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
splx(s);
Check the return code of sc_clean_up() in the only place where it was not checked at all. There is only one case when sc_clean_up() can fail, because of wait_scrn_saver_stop(), but it doesn't hurt to check anyway. Reviewed by: rodrigc Found by: Coverity Prevent
2006-05-12 22:43:07 +00:00
if (error)
return error;
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
error = sc_switch_scr(sc, i);
return (error);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('v', 6):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case VT_WAITACTIVE: /* wait for switch to occur */
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
i = (*(int *)data == 0) ? scp->index : (*(int *)data - 1);
- Fix "off by one" error in VT_WAITACTIVATE. Correctly accept 0 as meaning the requesting vty. - Accept 0 as the requesting vty in VT_ACTIVATE as in VT_WAITACTIVE. PR: 24423 MFC after: 10 days
2001-07-22 13:58:23 +00:00
if ((i < sc->first_vty) || (i >= sc->first_vty + sc->vtys))
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return EINVAL;
Improve VT_WAITACTIVE semantics. - Wait for requested vty activation regardless its open state. - Remove redundant console cleanup. Approved by: kib MFC after: 1 week
2008-03-20 04:10:52 +00:00
if (i == sc->cur_scp->index)
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Lower the priority of the sleep in the syscons for "waitvt" wchan to PZERO + 1. The sleeping process at the priority <= PZERO is counted as blocked, or, as comment states, 'disk wait'. PZERO + 1 works as well, and does not cause user confusion. Reported by: sam <samflanker at gmail com> MFC after: 1 week
2008-08-04 12:22:33 +00:00
error = tsleep(VTY_WCHAN(sc, i), (PZERO + 1) | PCATCH, "waitvt", 0);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return error;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
case VT_GETACTIVE: /* get active vty # */
*(int *)data = sc->cur_scp->index + 1;
return 0;
case VT_GETINDEX: /* get this vty # */
*(int *)data = scp->index + 1;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Add a VT_LOCKSWITCH ioctl that disallows vty switching. Something like this can be emulated by VT_SETMODEing to VT_PROCESS and never releasing the vty, but this has a number of problems, most notably that a process must stay resident for the lock to be in effect. Reviewed by: roam, sheldonh
2002-07-10 03:29:38 +00:00
case VT_LOCKSWITCH: /* prevent vty switching */
if ((*(int *)data) & 0x01)
sc->flags |= SC_SCRN_VTYLOCK;
else
sc->flags &= ~SC_SCRN_VTYLOCK;
return 0;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KDENABIO: /* allow io operations */
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
error = priv_check(td, PRIV_IO);
Don't allow i/o operations for non-root users. Add prototypes.
1995-10-14 07:08:09 +00:00
if (error != 0)
return error;
Simple p_ucred -> td_ucred changes to start using the per-thread ucred reference.
2002-02-27 18:32:23 +00:00
error = securelevel_gt(td->td_ucred, 0);
o Modify syscons ioctl securelevel checks to use securelevel_gt() (oh look, yet another API to do direct hardware I/O access.) Obtained from: TrustedBSD Project
2001-09-26 20:17:15 +00:00
if (error != 0)
return error;
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
#ifdef __i386__
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
td->td_frame->tf_eflags |= PSL_IOPL;
Implement the KDENABIO etc ioctl's for amd64 as well.
2004-09-24 01:19:11 +00:00
#elif defined(__amd64__)
td->td_frame->tf_rflags |= PSL_IOPL;
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
#endif
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KDDISABIO: /* disallow io operations (default) */
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
#ifdef __i386__
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
td->td_frame->tf_eflags &= ~PSL_IOPL;
Implement the KDENABIO etc ioctl's for amd64 as well.
2004-09-24 01:19:11 +00:00
#elif defined(__amd64__)
td->td_frame->tf_rflags &= ~PSL_IOPL;
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('K', 20):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
case KDSKBSTATE: /* set keyboard state (locks) */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (*(int *)data & ~LOCK_MASK)
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return EINVAL;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scp->status &= ~LOCK_MASK;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
scp->status |= *(int *)data;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp == sc->cur_scp)
update_kbd_state(scp, scp->status, LOCK_MASK);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KDGKBSTATE: /* get keyboard state (locks) */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp == sc->cur_scp)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
save_kbd_state(scp);
*(int *)data = scp->status & LOCK_MASK;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
- Remember the keyboard repeat delay and rate. - Add a new ioctl, KDGETREPEAT, to retrieve the keyboard repeat rate. - Delete unnecessary #include.
1999-12-13 09:31:43 +00:00
case KDGETREPEAT: /* get keyboard repeat & delay rates */
Keyboard driver update in preparation for the USB keyboard driver. - Refined internal interface in keyboard drivers so that: 1. the side effect of device probe is kept minimal, 2. polling mode function is added, 3. and new ioctl and configuration options are added (see below). - Added new ioctl: KDSETREPEAT Set keyboard typematic rate. There has existed an ioctl command, KDSETRAD, for the same purpose. However, KDSETRAD is dependent on the AT keyboard. KDSETREPEAT provides more generic interface. KDSETRAD will still be supported in the atkbd driver. - Added new configuration options: ATKBD_DFLT_KEYMAP Specify a keymap to be used as the default, built-in keymap. (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP, SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap. These options are now gone for good. The new option is more general.) KBD_DISABLE_KEYMAP_LOADING Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
case KDSETREPEAT: /* set keyboard repeat & delay rates (new) */
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(sc->kbd, cmd, data);
Keyboard driver update in preparation for the USB keyboard driver. - Refined internal interface in keyboard drivers so that: 1. the side effect of device probe is kept minimal, 2. polling mode function is added, 3. and new ioctl and configuration options are added (see below). - Added new ioctl: KDSETREPEAT Set keyboard typematic rate. There has existed an ioctl command, KDSETRAD, for the same purpose. However, KDSETRAD is dependent on the AT keyboard. KDSETREPEAT provides more generic interface. KDSETRAD will still be supported in the atkbd driver. - Added new configuration options: ATKBD_DFLT_KEYMAP Specify a keymap to be used as the default, built-in keymap. (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP, SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap. These options are now gone for good. The new option is more general.) KBD_DISABLE_KEYMAP_LOADING Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
if (error == ENOIOCTL)
error = ENODEV;
return error;
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('K', 67):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Keyboard driver update in preparation for the USB keyboard driver. - Refined internal interface in keyboard drivers so that: 1. the side effect of device probe is kept minimal, 2. polling mode function is added, 3. and new ioctl and configuration options are added (see below). - Added new ioctl: KDSETREPEAT Set keyboard typematic rate. There has existed an ioctl command, KDSETRAD, for the same purpose. However, KDSETRAD is dependent on the AT keyboard. KDSETREPEAT provides more generic interface. KDSETRAD will still be supported in the atkbd driver. - Added new configuration options: ATKBD_DFLT_KEYMAP Specify a keymap to be used as the default, built-in keymap. (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP, SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap. These options are now gone for good. The new option is more general.) KBD_DISABLE_KEYMAP_LOADING Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
case KDSETRAD: /* set keyboard repeat & delay rates (old) */
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
if (*(int *)data & ~0x7f)
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return EINVAL;
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(sc->kbd, KDSETRAD, data);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == ENOIOCTL)
error = ENODEV;
return error;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('K', 7):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KDSKBMODE: /* set keyboard mode */
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
switch (*(int *)data) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case K_XLATE: /* switch to XLT ascii mode */
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case K_RAW: /* switch to RAW scancode mode */
Add a new keyboard mode K_CODE. Returns a single byte for each key much like the scancode mode. However the keys that (for no good reason) returns extension codes etc, are translated into singlebyte codes. Needed by libvgl. This makes life ALOT easier, also the XFree86 folks could use this.
1997-10-01 20:46:29 +00:00
case K_CODE: /* switch to CODE mode */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scp->kbd_mode = *(int *)data;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp == sc->cur_scp)
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(sc->kbd, KDSKBMODE, data);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
default:
return EINVAL;
}
/* NOT REACHED */
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KDGKBMODE: /* get keyboard mode */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
*(int *)data = scp->kbd_mode;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case KDGKBINFO:
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(sc->kbd, cmd, data);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == ENOIOCTL)
error = ENODEV;
return error;
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('K', 8):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KDMKTONE: /* sound the bell */
if (*(int*)data)
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_bell(scp, (*(int*)data)&0xffff,
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
(((*(int*)data)>>16)&0xffff)*hz/1000);
else
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_bell(scp, scp->bell_pitch, scp->bell_duration);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('K', 63):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KIOCSOUND: /* make tone (*data) hz */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp == sc->cur_scp) {
if (*(int *)data)
return sc_tone(*(int *)data);
else
return sc_tone(0);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
return 0;
case KDGKBTYPE: /* get keyboard type */
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(sc->kbd, cmd, data);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == ENOIOCTL) {
/* always return something? XXX */
*(int *)data = 0;
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('K', 66):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KDSETLED: /* set keyboard LED status */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (*(int *)data & ~LED_MASK) /* FIXME: LOCK_MASK? */
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
return EINVAL;
scp->status &= ~LED_MASK;
scp->status |= *(int *)data;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp == sc->cur_scp)
update_kbd_leds(scp, scp->status);
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
return 0;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case KDGETLED: /* get keyboard LED status */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp == sc->cur_scp)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
save_kbd_state(scp);
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
*(int *)data = scp->status & LED_MASK;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
kbdmux(4) keyboard multiplexer integration o Add two new ioctl's KBADDKBD and KBRELKBD. These are used to add and remove keyboard to (and from) kbdmux(4) keyboard multiplexer; o Introduce new kbd_find_keyboard2() function. It does exactly the same job as kbd_find_keyboard() function except it allows to specify starting index. This function can be used to iterate over keyboards array; o Re-implement kbd_find_keyboard() as call to kbd_find_keyboard2() with starting index of zero; o Make sure syscons(4) passed KBADDKBD and KBRELKBD ioctl's onto currently active keyboard. These changes should not have any visible effect. MFC after: 1 week
2005-07-13 23:58:57 +00:00
case KBADDKBD: /* add/remove keyboard to/from mux */
case KBRELKBD:
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(sc->kbd, cmd, data);
kbdmux(4) keyboard multiplexer integration o Add two new ioctl's KBADDKBD and KBRELKBD. These are used to add and remove keyboard to (and from) kbdmux(4) keyboard multiplexer; o Introduce new kbd_find_keyboard2() function. It does exactly the same job as kbd_find_keyboard() function except it allows to specify starting index. This function can be used to iterate over keyboards array; o Re-implement kbd_find_keyboard() as call to kbd_find_keyboard2() with starting index of zero; o Make sure syscons(4) passed KBADDKBD and KBRELKBD ioctl's onto currently active keyboard. These changes should not have any visible effect. MFC after: 1 week
2005-07-13 23:58:57 +00:00
if (error == ENOIOCTL)
error = ENODEV;
return error;
Fix our ioctl(2) implementation when the argument is "int". New ioctls passing integer arguments should use the _IOWINT() macro. This fixes a lot of ioctl's not working on sparc64, most notable being keyboard/syscons ioctls. Full ABI compatibility is provided, with the bonus of fixing the handling of old ioctls on sparc64. Reviewed by: bde (with contributions) Tested by: emax, marius MFC after: 1 week
2006-09-27 19:57:02 +00:00
#if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \
defined(COMPAT_FREEBSD4) || defined(COMPAT_43)
case _IO('c', 110):
ival = IOCPARM_IVAL(data);
data = (caddr_t)&ival;
/* FALLTHROUGH */
#endif
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case CONS_SETKBD: /* set the new keyboard */
{
keyboard_t *newkbd;
s = spltty();
newkbd = kbd_get_keyboard(*(int *)data);
if (newkbd == NULL) {
splx(s);
return EINVAL;
}
error = 0;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->kbd != newkbd) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
i = kbd_allocate(newkbd->kb_name, newkbd->kb_unit,
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(void *)&sc->keyboard, sckbdevent, sc);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* i == newkbd->kb_index */
if (i >= 0) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->kbd != NULL) {
save_kbd_state(sc->cur_scp);
kbd_release(sc->kbd, (void *)&sc->keyboard);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->kbd = kbd_get_keyboard(i); /* sc->kbd == newkbd */
sc->keyboard = i;
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(sc->kbd, KDSKBMODE,
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(caddr_t)&sc->cur_scp->kbd_mode);
update_kbd_state(sc->cur_scp, sc->cur_scp->status,
LOCK_MASK);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
} else {
error = EPERM; /* XXX */
}
}
splx(s);
return error;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case CONS_RELKBD: /* release the current keyboard */
s = spltty();
error = 0;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->kbd != NULL) {
save_kbd_state(sc->cur_scp);
error = kbd_release(sc->kbd, (void *)&sc->keyboard);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == 0) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->kbd = NULL;
sc->keyboard = -1;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
splx(s);
return error;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
case CONS_GETTERM: /* get the current terminal emulator info */
{
sc_term_sw_t *sw;
if (((term_info_t *)data)->ti_index == 0) {
sw = scp->tsw;
} else {
sw = sc_term_match_by_number(((term_info_t *)data)->ti_index);
}
if (sw != NULL) {
strncpy(((term_info_t *)data)->ti_name, sw->te_name,
sizeof(((term_info_t *)data)->ti_name));
strncpy(((term_info_t *)data)->ti_desc, sw->te_desc,
sizeof(((term_info_t *)data)->ti_desc));
((term_info_t *)data)->ti_flags = 0;
return 0;
} else {
((term_info_t *)data)->ti_name[0] = '\0';
((term_info_t *)data)->ti_desc[0] = '\0';
((term_info_t *)data)->ti_flags = 0;
return EINVAL;
}
}
case CONS_SETTERM: /* set the current terminal emulator */
s = spltty();
error = sc_init_emulator(scp, ((term_info_t *)data)->ti_name);
/* FIXME: what if scp == sc_console! XXX */
splx(s);
return error;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case GIO_SCRNMAP: /* get output translation table */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
bcopy(&sc->scr_map, data, sizeof(sc->scr_map));
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
case PIO_SCRNMAP: /* set output translation table */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
bcopy(data, &sc->scr_map, sizeof(sc->scr_map));
for (i=0; i<sizeof(sc->scr_map); i++) {
sc->scr_rmap[sc->scr_map[i]] = i;
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case GIO_KEYMAP: /* get keyboard translation table */
case PIO_KEYMAP: /* set keyboard translation table */
Restore binary compatibility for GIO_KEYMAP and PIO_KEYMAP. Back in 2009 I changed the ABI of the GIO_KEYMAP and PIO_KEYMAP ioctls to support wide characters. I created a patch to add ABI compatibility for the old calls, but I didn't get any feedback to that. It seems now people are upgrading from 8 to 9 they experience this issue, so add it anyway.
2011-07-17 08:19:19 +00:00
case OGIO_KEYMAP: /* get keyboard translation table (compat) */
case OPIO_KEYMAP: /* set keyboard translation table (compat) */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case GIO_DEADKEYMAP: /* get accent key translation table */
case PIO_DEADKEYMAP: /* set accent key translation table */
case GETFKEY: /* get function key string */
case SETFKEY: /* set function key string */
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(sc->kbd, cmd, data);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == ENOIOCTL)
error = ENODEV;
return error;
Added accent (dead) key support to syscons and kbdcontrol. With a keymap with accent key definitions loaded to syscons, you press an accent key followed by a regular letter key to produce an accented letter. Press an accent key followed by the space bar to get the accent letter itself. Code is based on the ideas and work by jmrueda@diatel.upm.es and totii@est.is. PR: i386/4016 console.h - Defined structures and constants for accent (dead) keys. syscons.c, kbdtables.h - When an accent key is pressed, set the corresponding index to `accents'. If the next key is the space key, produce the accent char itself. Otherwise search the accent key map entry, indexed by `accents', for a matching pair of a regular char and an accented char. - Added ioctl functions to set and get the accent key map (PIO_DEADKEYMAP and GIO_DEADKEYMAP).
1998-01-07 08:40:34 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_FONT_LOADING
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case PIO_FONT8x8: /* set 8x8 dot font */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISFONTAVAIL(sc->adp->va_flags))
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
bcopy(data, sc->font_8, 8*256);
sc->fonts_loaded |= FONT_8;
More fixes to deal with fonts: - Set the correct value scp->font_size in init_scp(). - Set scp->font_size to FONT_NONE for VGA_MODEX. Interim fix for a font problem: - A kludge to display the correct font on some video cards. We should be able to load multiple fonts to the VGA plane #2 and switch between fonts by setting the font select register in the VGA sequencer. It appears that the current code isn't functioning as expected on some VGA cards (I have reports on Millenium and Mach64 cards). This is either a bug in syscons or a hardware compatibility problem ;-< This kludge will always load only one font set at a time and always use the font page #0 on the plane #2. It is an interim kludge until we find the exact cause and solution. Small adjustment for mouse cursor handling: - Turn off the mouse cursor early when changing video modes. Video mode switch fixes: - Stop the screen saver when changing video modes. - Enclose the critical section with a pair of spltty()/splx(). - A kludge to prevent scrn_update() from accessing video memory in less- critical sections in video mode change; artificially turn on the UNKNOWN_MODE flag. PR: bin/5899, bin/5907 Tested by: ache and a couple of users OKed by: sos
1998-04-04 16:26:53 +00:00
/*
* FONT KLUDGE
* Always use the font page #0. XXX
* Don't load if the current font size is not 8x8.
*/
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (ISTEXTSC(sc->cur_scp) && (sc->cur_scp->font_size < 14))
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_load_font(sc->cur_scp, 0, 8, 8, sc->font_8, 0, 256);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
case GIO_FONT8x8: /* get 8x8 dot font */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISFONTAVAIL(sc->adp->va_flags))
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->fonts_loaded & FONT_8) {
bcopy(sc->font_8, data, 8*256);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
}
else
return ENXIO;
case PIO_FONT8x14: /* set 8x14 dot font */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISFONTAVAIL(sc->adp->va_flags))
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
bcopy(data, sc->font_14, 14*256);
sc->fonts_loaded |= FONT_14;
More fixes to deal with fonts: - Set the correct value scp->font_size in init_scp(). - Set scp->font_size to FONT_NONE for VGA_MODEX. Interim fix for a font problem: - A kludge to display the correct font on some video cards. We should be able to load multiple fonts to the VGA plane #2 and switch between fonts by setting the font select register in the VGA sequencer. It appears that the current code isn't functioning as expected on some VGA cards (I have reports on Millenium and Mach64 cards). This is either a bug in syscons or a hardware compatibility problem ;-< This kludge will always load only one font set at a time and always use the font page #0 on the plane #2. It is an interim kludge until we find the exact cause and solution. Small adjustment for mouse cursor handling: - Turn off the mouse cursor early when changing video modes. Video mode switch fixes: - Stop the screen saver when changing video modes. - Enclose the critical section with a pair of spltty()/splx(). - A kludge to prevent scrn_update() from accessing video memory in less- critical sections in video mode change; artificially turn on the UNKNOWN_MODE flag. PR: bin/5899, bin/5907 Tested by: ache and a couple of users OKed by: sos
1998-04-04 16:26:53 +00:00
/*
* FONT KLUDGE
* Always use the font page #0. XXX
* Don't load if the current font size is not 8x14.
*/
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (ISTEXTSC(sc->cur_scp)
&& (sc->cur_scp->font_size >= 14)
&& (sc->cur_scp->font_size < 16))
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_load_font(sc->cur_scp, 0, 14, 8, sc->font_14, 0, 256);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
case GIO_FONT8x14: /* get 8x14 dot font */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISFONTAVAIL(sc->adp->va_flags))
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->fonts_loaded & FONT_14) {
bcopy(sc->font_14, data, 14*256);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
}
else
return ENXIO;
case PIO_FONT8x16: /* set 8x16 dot font */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISFONTAVAIL(sc->adp->va_flags))
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
bcopy(data, sc->font_16, 16*256);
sc->fonts_loaded |= FONT_16;
More fixes to deal with fonts: - Set the correct value scp->font_size in init_scp(). - Set scp->font_size to FONT_NONE for VGA_MODEX. Interim fix for a font problem: - A kludge to display the correct font on some video cards. We should be able to load multiple fonts to the VGA plane #2 and switch between fonts by setting the font select register in the VGA sequencer. It appears that the current code isn't functioning as expected on some VGA cards (I have reports on Millenium and Mach64 cards). This is either a bug in syscons or a hardware compatibility problem ;-< This kludge will always load only one font set at a time and always use the font page #0 on the plane #2. It is an interim kludge until we find the exact cause and solution. Small adjustment for mouse cursor handling: - Turn off the mouse cursor early when changing video modes. Video mode switch fixes: - Stop the screen saver when changing video modes. - Enclose the critical section with a pair of spltty()/splx(). - A kludge to prevent scrn_update() from accessing video memory in less- critical sections in video mode change; artificially turn on the UNKNOWN_MODE flag. PR: bin/5899, bin/5907 Tested by: ache and a couple of users OKed by: sos
1998-04-04 16:26:53 +00:00
/*
* FONT KLUDGE
* Always use the font page #0. XXX
* Don't load if the current font size is not 8x16.
*/
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (ISTEXTSC(sc->cur_scp) && (sc->cur_scp->font_size >= 16))
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_load_font(sc->cur_scp, 0, 16, 8, sc->font_16, 0, 256);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
case GIO_FONT8x16: /* get 8x16 dot font */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISFONTAVAIL(sc->adp->va_flags))
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->fonts_loaded & FONT_16) {
bcopy(sc->font_16, data, 16*256);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
}
else
return ENXIO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif /* SC_NO_FONT_LOADING */
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
default:
break;
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
return (ENOIOCTL);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
static int
consolectl_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int fflag,
struct thread *td)
{
return sctty_ioctl(dev->si_drv1, cmd, data, td);
}
Make sure that all mouse buttons are released when clients using /dev/consolectl close. This fixes a problem where if a USB mouse is detached while a button is pressed, that button is never released. MFC after: 1 week
2013-02-06 11:16:18 +00:00
static int
consolectl_close(struct cdev *dev, int flags, int mode, struct thread *td)
{
#ifndef SC_NO_SYSMOUSE
mouse_info_t info;
memset(&info, 0, sizeof(info));
info.operation = MOUSE_ACTION;
/*
* Make sure all buttons are released when moused and other
* console daemons exit, so that no buttons are left pressed.
*/
(void) sctty_ioctl(dev->si_drv1, CONS_MOUSECTL, (caddr_t)&info, td);
#endif
return (0);
}
Remove a hard-coded table of kernel console I/O functions exported from sc, vt and sio drivers. Use instead a linker_set to collect them. Staticize ??cngetc(), ??cnputc(), etc functions in sc and vt drivers. We must still have siocngetc() and siocnputc() as globals because they are directly referred to by i386-gdbstub.c :-( Oked by: bde
1999-01-07 14:14:24 +00:00
static void
Convert to new console api
2006-05-26 13:54:27 +00:00
sc_cnprobe(struct consdev *cp)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
int unit;
int flags;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Use a common tunable to choose between vt(4)/sc(4) With this change and previous work from ray@ it will be possible to put both in GENERIC, and have one enabled by default, but allow the other to be selected via the loader. (The previous implementation had separate kern.vt.disable and hw.syscons.disable tunables, and would panic if both drivers were compiled in and neither was explicitly disabled.) MFC after: 1 week Sponsored by: The FreeBSD Foundation
2014-06-27 17:50:33 +00:00
if (!vty_enabled(VTY_SC)) {
Allow to disable syscons(4) if "hw.syscons.disable" kenv is set. Sponsored by: The FreeBSD Foundation
2014-06-18 22:23:10 +00:00
cp->cn_pri = CN_DEAD;
return;
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
cp->cn_pri = sc_get_cons_priority(&unit, &flags);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* a video card is always required */
if (!scvidprobe(unit, flags, TRUE))
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
cp->cn_pri = CN_DEAD;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* syscons will become console even when there is no keyboard */
sckbdprobe(unit, flags, TRUE);
if (cp->cn_pri == CN_DEAD)
Bring the 'new-bus' to the i386. This extensively changes the way the i386 platform boots, it is no longer ISA-centric, and is fully dynamic. Most old drivers compile and run without modification via 'compatability shims' to enable a smoother transition. eisa, isapnp and pccard* are not yet using the new resource manager. Once fully converted, all drivers will be loadable, including PCI and ISA. (Some other changes appear to have snuck in, including a port of Soren's ATA driver to the Alpha. Soren, back this out if you need to.) This is a checkpoint of work-in-progress, but is quite functional. The bulk of the work was done over the last few years by Doug Rabson and Garrett Wollman. Approved by: core
1999-04-16 21:22:55 +00:00
return;
The syscons driver doesn't really check the presence of the display adapter during the system boot. It always assumes there is at least a monochrome adapter. This is rather strange assumption. If there is no dispaly adapter, the console driver cannot be any good... In this patch, scinit() is split into two parts; the first part is now called scvidprobe() which will detect the presence of video card at the CGA or MONO buffer address and returns TRUE if found. It is called during sccnprobe() and scprobe(). Both will fail if no video card is found. The second part, whose name stays the same as before, scinit(), is called from sccninit() and scattach() to complete initialization of the found video card. The keyboard probe code is moved from scprobe() to sckbdprobe(); scprobe() now calls scvidprobe() and sckbdprobe() to carry out device probe. (This is rather a cosmetic change, but it sure makes the code look better organized.) The problem pointed out by Joerg.
1997-06-22 12:04:36 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
/* initialize required fields */
Make syscons(4) use ttyv0 instead of consolectl as its primary window. When I was hacking on uart(4) to make it work with the MPSAFE TTY layer, I noticed there was a difference between the way syscons and uart work with respect to consoles: - The uart(4) driver sets cn_name to the corresponding ttyu%r node, which means init(8) (which opens /dev/console) will have its output redirected to /dev/ttyu%r. After /etc/rc is done, it can spawn a getty on that device node as well. - Syscons used a little different approach. Apart from the /dev/ttyv%r nodes, it creates a /dev/consolectl node. This device node is used by moused and others to deliver their data, but for some reason it also acts as a TTY, which shares its stat structure with ttyv0. This device node is used as a console (run conscontrol). There are a couple advantages of this approach: - Because we use two different TTY's to represent the 0th syscons window, we allocate two sets of TTY buffers. Even if you don't use /dev/consolectl after the system has booted (systems that don't run moused), it seems the buffers are still allocated. - We have to apply an evil hack to redirect input to /dev/consolectl. Because each window (stat) is associated not associated with one TTY, syscons solves this by redirecting all input to closed TTY's to consolectl. This means that opening /dev/ttyv0 while in single user mode will probably cause strange things to happen with respect to keyboard input redirection. The first patch that I discussed with philip@ turned consolectl into a symlink to ttyv0, but this was not a good idea, because in theory we would want consolectl to be a simple device node, which contains all the `privileged' ioctl()'s. Apart from that, it didn't work, because each time /dev/ttyv0 got revoked, moused also lost its descriptor to deliver input, which meant you had to plug out/in your mouse to make it work again. This version just leaves the consolectl device the way it is. It can still be used to write output to ttyv0, but it can no longer receive any input. In my opinion this patch is not a complete solution, but it's already a step in the good direction. It would allow us to turn consolectl into a special (non-TTY) device node in the far future. It shaves off 15 KB of wasted TTY buffer space. Discussed with: philip
2008-08-24 19:50:57 +00:00
strcpy(cp->cn_name, "ttyv0");
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Remove a hard-coded table of kernel console I/O functions exported from sc, vt and sio drivers. Use instead a linker_set to collect them. Staticize ??cngetc(), ??cnputc(), etc functions in sc and vt drivers. We must still have siocngetc() and siocnputc() as globals because they are directly referred to by i386-gdbstub.c :-( Oked by: bde
1999-01-07 14:14:24 +00:00
static void
Convert to new console api
2006-05-26 13:54:27 +00:00
sc_cninit(struct consdev *cp)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
int unit;
int flags;
sc_get_cons_priority(&unit, &flags);
scinit(unit, flags | SC_KERNEL_CONSOLE);
sc_console_unit = unit;
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
sc_console = sc_get_stat(sc_get_softc(unit, SC_KERNEL_CONSOLE)->dev[0]);
Eliminate global cons_unavailable flag and replace it by the status bit maintained on a per-device basis. Single variable is inadequate on machines running with multiple consoles enabled.
2004-02-05 01:56:43 +00:00
sc_consptr = cp;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
static void
Convert to new console api
2006-05-26 13:54:27 +00:00
sc_cnterm(struct consdev *cp)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
{
/* we are not the kernel console any more, release everything */
if (sc_console_unit < 0)
return; /* shouldn't happen */
#if 0 /* XXX */
sc_clear_screen(sc_console);
sccnupdate(sc_console);
#endif
Update for the KDB framework. Sanitize the alpha console code now that it's in the way even more. Basicly: remove all alpha specific console support from gfb(4), sio(4) and syscons(4). Rewrite the alpha console initialization to be identical to all other platforms. In a nutshell: call cninit(). The platform specific code now only sets or clears RB_SERIAL and thus automaticly causes the right console to be selected. sio.c: o Replace the remote GDB hacks and use the GDB debug port interface instead. o Make debugging code conditional upon KDB instead of DDB. o Call kdb_alt_break() instead of db_alt_break(). o Call kdb_enter() instead of breakpoint(). o Remove the ugly compatibility of using the console as the debug port.
2004-07-10 22:29:41 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scterm(sc_console_unit, SC_KERNEL_CONSOLE);
sc_console_unit = -1;
sc_console = NULL;
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
}
kern cons: introduce infrastructure for console grabbing by kernel At the moment grab and ungrab methods of all console drivers are no-ops. Current intended meaning of the calls is that the kernel takes control of console input. In the future the semantics may be extended to mean that the calling thread takes full ownership of the console (e.g. console output from other threads could be suspended). Inspired by: bde MFC after: 2 months
2011-12-17 15:08:43 +00:00
static void
sc_cngrab(struct consdev *cp)
{
syscons: provide a first iteration of cngrab/cnungrab implementation - put underlying keyboard(s) into the polling mode for the whole duration of the grab, instead of the previous behavior of going into and out of the polling mode around each polling attempt - ditto for setting K_XLATE mode and enabling a disabled keyboard Inspired by: bde MFC after: 2 months
2011-12-17 15:57:39 +00:00
scr_stat *scp;
sc_cngrab: switch to console vty when possible In the future we may want to perform the switch even if the console is currently in the graphics mode by trying to reset the video adapter first (e.g. by executing vesa/vga bios post). That would probably require some sort of a one-way flag as returning the control of the console back to the interrupted application most likely would result in a mess. Reviewed by: emaste MFC after: 2 months
2011-12-21 12:21:22 +00:00
if (!cold &&
sc_console->sc->cur_scp->index != sc_console->index &&
sc_console->sc->cur_scp->smode.mode == VT_AUTO &&
sc_console->smode.mode == VT_AUTO)
sc_switch_scr(sc_console->sc, sc_console->index);
syscons: provide a first iteration of cngrab/cnungrab implementation - put underlying keyboard(s) into the polling mode for the whole duration of the grab, instead of the previous behavior of going into and out of the polling mode around each polling attempt - ditto for setting K_XLATE mode and enabling a disabled keyboard Inspired by: bde MFC after: 2 months
2011-12-17 15:57:39 +00:00
scp = sc_console->sc->cur_scp;
sc_cngrab: switch to console vty when possible In the future we may want to perform the switch even if the console is currently in the graphics mode by trying to reset the video adapter first (e.g. by executing vesa/vga bios post). That would probably require some sort of a one-way flag as returning the control of the console back to the interrupted application most likely would result in a mess. Reviewed by: emaste MFC after: 2 months
2011-12-21 12:21:22 +00:00
syscons: provide a first iteration of cngrab/cnungrab implementation - put underlying keyboard(s) into the polling mode for the whole duration of the grab, instead of the previous behavior of going into and out of the polling mode around each polling attempt - ditto for setting K_XLATE mode and enabling a disabled keyboard Inspired by: bde MFC after: 2 months
2011-12-17 15:57:39 +00:00
if (scp->sc->kbd == NULL)
return;
if (scp->grabbed++ > 0)
return;
/*
* Make sure the keyboard is accessible even when the kbd device
* driver is disabled.
*/
kbdd_enable(scp->sc->kbd);
/* we shall always use the keyboard in the XLATE mode here */
scp->kbd_prev_mode = scp->kbd_mode;
scp->kbd_mode = K_XLATE;
(void)kbdd_ioctl(scp->sc->kbd, KDSKBMODE, (caddr_t)&scp->kbd_mode);
kbdd_poll(scp->sc->kbd, TRUE);
kern cons: introduce infrastructure for console grabbing by kernel At the moment grab and ungrab methods of all console drivers are no-ops. Current intended meaning of the calls is that the kernel takes control of console input. In the future the semantics may be extended to mean that the calling thread takes full ownership of the console (e.g. console output from other threads could be suspended). Inspired by: bde MFC after: 2 months
2011-12-17 15:08:43 +00:00
}
static void
sc_cnungrab(struct consdev *cp)
{
syscons: provide a first iteration of cngrab/cnungrab implementation - put underlying keyboard(s) into the polling mode for the whole duration of the grab, instead of the previous behavior of going into and out of the polling mode around each polling attempt - ditto for setting K_XLATE mode and enabling a disabled keyboard Inspired by: bde MFC after: 2 months
2011-12-17 15:57:39 +00:00
scr_stat *scp;
scp = sc_console->sc->cur_scp; /* XXX */
if (scp->sc->kbd == NULL)
return;
if (--scp->grabbed > 0)
return;
kbdd_poll(scp->sc->kbd, FALSE);
scp->kbd_mode = scp->kbd_prev_mode;
(void)kbdd_ioctl(scp->sc->kbd, KDSKBMODE, (caddr_t)&scp->kbd_mode);
kbdd_disable(scp->sc->kbd);
kern cons: introduce infrastructure for console grabbing by kernel At the moment grab and ungrab methods of all console drivers are no-ops. Current intended meaning of the calls is that the kernel takes control of console input. In the future the semantics may be extended to mean that the calling thread takes full ownership of the console (e.g. console output from other threads could be suspended). Inspired by: bde MFC after: 2 months
2011-12-17 15:08:43 +00:00
}
Remove a hard-coded table of kernel console I/O functions exported from sc, vt and sio drivers. Use instead a linker_set to collect them. Staticize ??cngetc(), ??cnputc(), etc functions in sc and vt drivers. We must still have siocngetc() and siocnputc() as globals because they are directly referred to by i386-gdbstub.c :-( Oked by: bde
1999-01-07 14:14:24 +00:00
static void
Convert to new console api
2006-05-26 13:54:27 +00:00
sc_cnputc(struct consdev *cd, int c)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
Correct the type of the `c' arg to pccnputc(). Move declarations of console functions to cons.h so that they can't be defined inconsistently in several places. They should be config(8)ed.
1995-04-23 10:15:42 +00:00
u_char buf[1];
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scr_stat *scp = sc_console;
Wrap two declarations that are only used in an #ifdef in their own #ifdef. Reviewed by: bde
1999-08-17 22:06:17 +00:00
#ifndef SC_NO_HISTORY
Disable processing of output data after disabling scroll lock by force. The syscons code disabled scroll lock inside sc_cnputs() if it's going to print a system message. The code currently wants to process any TTY output data as well, but we cannot do this, because the TTY lock is a sleep mutex, while cnputs() picks up a spin mutex. Disable the code for now. It solves a panic when a console message is printed while scroll lock is enabled. One solution would be to initialize a task structure here. Reported by: Paul B. Mahol <onemda gmail com>
2008-08-31 10:17:40 +00:00
#if 0
- Clear relevant variables when the keyboard is not available. - Do not touch the `tty' struct when it's not yet available. - Initialize correct bits in `fonts_loaded'.
1999-07-18 06:16:53 +00:00
struct tty *tp;
Disable processing of output data after disabling scroll lock by force. The syscons code disabled scroll lock inside sc_cnputs() if it's going to print a system message. The code currently wants to process any TTY output data as well, but we cannot do this, because the TTY lock is a sleep mutex, while cnputs() picks up a spin mutex. Disable the code for now. It solves a panic when a console message is printed while scroll lock is enabled. One solution would be to initialize a task structure here. Reported by: Paul B. Mahol <onemda gmail com>
2008-08-31 10:17:40 +00:00
#endif
Wrap two declarations that are only used in an #ifdef in their own #ifdef. Reviewed by: bde
1999-08-17 22:06:17 +00:00
#endif /* !SC_NO_HISTORY */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
int s;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* assert(sc_console != NULL) */
#ifndef SC_NO_HISTORY
if (scp == scp->sc->cur_scp && scp->status & SLKED) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scp->status &= ~SLKED;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
update_kbd_state(scp, scp->status, SLKED);
if (scp->status & BUFFER_SAVED) {
if (!sc_hist_restore(scp))
sc_remove_cutmarking(scp);
scp->status &= ~BUFFER_SAVED;
scp->status |= CURSOR_ENABLED;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_draw_cursor_image(scp);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
Disable processing of output data after disabling scroll lock by force. The syscons code disabled scroll lock inside sc_cnputs() if it's going to print a system message. The code currently wants to process any TTY output data as well, but we cannot do this, because the TTY lock is a sleep mutex, while cnputs() picks up a spin mutex. Disable the code for now. It solves a panic when a console message is printed while scroll lock is enabled. One solution would be to initialize a task structure here. Reported by: Paul B. Mahol <onemda gmail com>
2008-08-31 10:17:40 +00:00
#if 0
/*
* XXX: Now that TTY's have their own locks, we cannot process
* any data after disabling scroll lock. cnputs already holds a
* spinlock.
*/
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tp = SC_DEV(scp->sc, scp->index);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
/* XXX "tp" can be NULL */
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tty_lock(tp);
if (tty_opened(tp))
sctty_outwakeup(tp);
tty_unlock(tp);
Disable processing of output data after disabling scroll lock by force. The syscons code disabled scroll lock inside sc_cnputs() if it's going to print a system message. The code currently wants to process any TTY output data as well, but we cannot do this, because the TTY lock is a sleep mutex, while cnputs() picks up a spin mutex. Disable the code for now. It solves a panic when a console message is printed while scroll lock is enabled. One solution would be to initialize a task structure here. Reported by: Paul B. Mahol <onemda gmail com>
2008-08-31 10:17:40 +00:00
#endif
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif /* !SC_NO_HISTORY */
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
Don't convert \n to \r\n in pccnputc(). This is the responsibility of cnputc().
1995-06-14 05:16:12 +00:00
buf[0] = c;
Make a 1:1 mapping between syscons stats and terminal emulators. After I imported libteken into the source tree, I noticed syscons didn't store the cursor position inside the terminal emulator, but inside the virtual terminal stat. This is not very useful, because when you implement more complex forms of line wrapping, you need to keep track of more state than just the cursor position. Because the kernel messages didn't share the same terminal emulator as ttyv0, this caused a lot of strange things, like kernel messages being misplaced and a missing notification to resize the terminal emulator for kernel messages never to be resized when using vidcontrol. This patch just removes kernel_console_ts and adds a special parameter to te_puts to determine whether messages should be printed using regular colors or the ones for kernel messages. Reported by: ache Tested by: nyan, garga (older version)
2009-03-10 11:28:54 +00:00
sc_puts(scp, buf, 1, 1);
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
s = spltty(); /* block sckbdevent and scrn_timer */
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
sccnupdate(scp);
Fixed a race that caused panics in kernel printfs when the screen timeout routine changed the screen pointers while output was in progress.
1996-05-01 03:58:21 +00:00
splx(s);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Remove a hard-coded table of kernel console I/O functions exported from sc, vt and sio drivers. Use instead a linker_set to collect them. Staticize ??cngetc(), ??cnputc(), etc functions in sc and vt drivers. We must still have siocngetc() and siocnputc() as globals because they are directly referred to by i386-gdbstub.c :-( Oked by: bde
1999-01-07 14:14:24 +00:00
static int
Convert to new console api
2006-05-26 13:54:27 +00:00
sc_cngetc(struct consdev *cd)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static struct fkeytab fkey;
static int fkeycp;
scr_stat *scp;
Allow Syscons terminal emulators to provide function key strings. xterm and cons25 have some incompatibilities when it comes to escape sequences for special keys, such as F1 to F12, home, end, etc. Add a new te_fkeystr() that can be used to override the strings. scterm-sck won't do anything with this, but scterm-teken will use teken_get_sequences() to obtain the proper sequence.
2009-11-11 08:20:19 +00:00
const u_char *p;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
int s = spltty(); /* block sckbdevent and scrn_timer while we poll */
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
int c;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* assert(sc_console != NULL) */
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
/*
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
* Stop the screen saver and update the screen if necessary.
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
* What if we have been running in the screen saver code... XXX
*/
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
sc_touch_scrn_saver();
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp = sc_console->sc->cur_scp; /* XXX */
sccnupdate(scp);
if (fkeycp < fkey.len) {
splx(s);
return fkey.str[fkeycp++];
}
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->sc->kbd == NULL) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
splx(s);
return -1;
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Remove obsolete/bogus layering. Reviewed by: freebsd-current@, freebsd-hackers@ MFC after: 1 week
2009-04-09 18:22:51 +00:00
c = scgetc(scp->sc, SCGETC_CN | SCGETC_NONBLOCK);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
switch (KEYFLAGS(c)) {
case 0: /* normal char */
return KEYCHAR(c);
case FKEY: /* function key */
Allow Syscons terminal emulators to provide function key strings. xterm and cons25 have some incompatibilities when it comes to escape sequences for special keys, such as F1 to F12, home, end, etc. Add a new te_fkeystr() that can be used to override the strings. scterm-sck won't do anything with this, but scterm-teken will use teken_get_sequences() to obtain the proper sequence.
2009-11-11 08:20:19 +00:00
p = (*scp->tsw->te_fkeystr)(scp, c);
if (p != NULL) {
fkey.len = strlen(p);
bcopy(p, fkey.str, fkey.len);
fkeycp = 1;
return fkey.str[0];
}
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
p = kbdd_get_fkeystr(scp->sc->kbd, KEYCHAR(c), (size_t *)&fkeycp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
fkey.len = fkeycp;
if ((p != NULL) && (fkey.len > 0)) {
bcopy(p, fkey.str, fkey.len);
fkeycp = 1;
return fkey.str[0];
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
return c; /* XXX */
case NOKEY:
case ERRKEY:
default:
return -1;
}
/* NOT REACHED */
1) Restore removed SNAKE_SAVER (Nate, WHY you do it?) 2) Make SNAKE_SAVER like default, if no saver specified in "options" 3) Remove #ifdef STAR_SAVER before line /* make screensaver happy */ this code needed in any case.
1994-02-01 10:43:02 +00:00
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
static void
sccnupdate(scr_stat *scp)
{
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
/* this is a cut-down version of scrn_timer()... */
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
if (suspend_in_progress || scp->sc->font_loading_in_progress)
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
return;
Add a new mechanism, cndbctl(), to tell the console driver that ddb is entered. Don't refer to `in_Debugger' to see if we are in the debugger. (The variable used to be static in Debugger() and wasn't updated if ddb is entered via traps and panic anyway.) - Don't refer to `in_Debugger'. - Add `db_active' to i386/i386/db_interface.d (as in alpha/alpha/db_interface.c). - Remove cnpollc() stub from ddb/db_input.c. - Add the dbctl function to syscons, pcvt, and sio. (The function for pcvt and sio is noop at the moment.) Jointly developed by: bde and me (The final version was tweaked by me and not reviewed by bde. Thus, if there is any error in this commit, that is entirely of mine, not his.) Some changes were obtained from: NetBSD
2000-01-11 14:54:01 +00:00
if (debugger > 0 || panicstr || shutdown_in_progress) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
sc_touch_scrn_saver();
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
} else if (scp != scp->sc->cur_scp) {
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
return;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
}
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
if (!run_scrn_saver)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->sc->flags &= ~SC_SCRN_IDLE;
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if ((saver_mode != CONS_LKM_SAVER) || !(scp->sc->flags & SC_SCRN_IDLE))
if (scp->sc->flags & SC_SCRN_BLANKED)
stop_scrn_saver(scp->sc, current_saver);
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp != scp->sc->cur_scp || scp->sc->blink_in_progress
|| scp->sc->switch_in_progress)
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
return;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/*
* FIXME: unlike scrn_timer(), we call scrn_update() from here even
* when write_in_progress is non-zero. XXX
*/
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
- Define a convenience macro ISTTYOPEN(). - Slightly refine screen saver logic. No functional change. MFC after: 2 weeks
2001-07-12 11:43:29 +00:00
if (!ISGRAPHSC(scp) && !(scp->sc->flags & SC_SCRN_BLANKED))
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
scrn_update(scp, TRUE);
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
static void
Fixed the type of timeout functions and removed casts that hid the type mismatches. Not taking an arg in scrn_timer() broke `cc -mrtd'.
1997-04-20 16:05:33 +00:00
scrn_timer(void *arg)
o Restore removed hardware cursor support and make it _default_ case, software cursor now optional case. Driver must provide raw things (what hardware do for us, exactly) as default case, all driver features must be _optional_. Modern VGAs have internal configuration utilities to set cursor shape/blinking which stored into cards ROM, and syscons nuke out such features completely by forcing software cursor. Moreover, software cursor is hard to distinguish on standouted (or near standouted) fields and tends to disappearse from the screen. Set "flags 0x4" to enable software cursor now. o Cleanup screen savers. o Don't draw cursor if saver or blinker is active. o Duplicated code moved to functons. o Add more checks for blinker in progress, character lost otherwise when blinker restore old contents. o Reduce blinking counter to 3, too slow in old variant. o Fix timeout code in scrn_timer(), old variant can reenter iself, if action takes too long time. o Disable visual bell for scroll lock mode, saved screen becomes overwritted otherwise.
1995-01-26 04:56:25 +00:00
{
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#ifndef PC98
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
static time_t kbd_time_stamp = 0;
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_softc_t *sc;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
scr_stat *scp;
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
int again, rate;
- A new semaphore: font_loading_in_progress. Don't touch/update the screen while manipulating font data. Possibly related to PR: kern/4271 - Set up VGA in alphanumeric mode rather than graphics mode when loading font into video memory. This will drastically reduce flicker. PR: bin/2977 - Set up scp->font_size properly during video mode switch caused by ioctl.
1998-02-11 15:00:24 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
again = (arg != NULL);
if (arg != NULL)
sc = (sc_softc_t *)arg;
else if (sc_console != NULL)
sc = sc_console->sc;
else
return;
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
/* find the vty to update */
scp = sc->cur_scp;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* don't do anything when we are performing some I/O operations */
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
if (suspend_in_progress || sc->font_loading_in_progress)
goto done;
o Restore removed hardware cursor support and make it _default_ case, software cursor now optional case. Driver must provide raw things (what hardware do for us, exactly) as default case, all driver features must be _optional_. Modern VGAs have internal configuration utilities to set cursor shape/blinking which stored into cards ROM, and syscons nuke out such features completely by forcing software cursor. Moreover, software cursor is hard to distinguish on standouted (or near standouted) fields and tends to disappearse from the screen. Set "flags 0x4" to enable software cursor now. o Cleanup screen savers. o Don't draw cursor if saver or blinker is active. o Duplicated code moved to functons. o Add more checks for blinker in progress, character lost otherwise when blinker restore old contents. o Reduce blinking counter to 3, too slow in old variant. o Fix timeout code in scrn_timer(), old variant can reenter iself, if action takes too long time. o Disable visual bell for scroll lock mode, saved screen becomes overwritted otherwise.
1995-01-26 04:56:25 +00:00
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#ifndef PC98
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if ((sc->kbd == NULL) && (sc->config & SC_AUTODETECT_KBD)) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* try to allocate a keyboard automatically */
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
if (kbd_time_stamp != time_uptime) {
kbd_time_stamp = time_uptime;
Integrate kbdmux(4) into syscons(4) and kbd code. By default syscons(4) will look for the kbdmux(4) keyboard first, and then, if not found, look for any keyboard. Current kbd code is modified so if kbdmux(4) is the current keyboard, all new keyboards are automatically added to the kbdmux(4). Switch to kbdmux(4) can be done at boot time, by loading kbdmux module at the loader prompt, or at runtime, by kldload'ing the kbdmux module and releasing current active keyboard. If, for whatever reason, kbdmux(4) is not required/desired then just do not load it and everything should work as before. It is also possible to kldunload kbdmux at runtime and syscons(4) will automatically switch to the first available keyboard. No response from: freebsd-current@ MFC after: 1 day
2006-02-28 23:46:23 +00:00
sc->keyboard = sc_allocate_keyboard(sc, -1);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->keyboard >= 0) {
sc->kbd = kbd_get_keyboard(sc->keyboard);
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(sc->kbd, KDSKBMODE,
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(caddr_t)&sc->cur_scp->kbd_mode);
update_kbd_state(sc->cur_scp, sc->cur_scp->status,
LOCK_MASK);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
}
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
}
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#endif /* PC98 */
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
/* should we stop the screen saver? */
Add a new mechanism, cndbctl(), to tell the console driver that ddb is entered. Don't refer to `in_Debugger' to see if we are in the debugger. (The variable used to be static in Debugger() and wasn't updated if ddb is entered via traps and panic anyway.) - Don't refer to `in_Debugger'. - Add `db_active' to i386/i386/db_interface.d (as in alpha/alpha/db_interface.c). - Remove cnpollc() stub from ddb/db_input.c. - Add the dbctl function to syscons, pcvt, and sio. (The function for pcvt and sio is noop at the moment.) Jointly developed by: bde and me (The final version was tweaked by me and not reviewed by bde. Thus, if there is any error in this commit, that is entirely of mine, not his.) Some changes were obtained from: NetBSD
2000-01-11 14:54:01 +00:00
if (debugger > 0 || panicstr || shutdown_in_progress)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
sc_touch_scrn_saver();
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
if (run_scrn_saver) {
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
if (time_uptime > sc->scrn_time_stamp + scrn_blank_time)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags |= SC_SCRN_IDLE;
else
sc->flags &= ~SC_SCRN_IDLE;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
} else {
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
sc->scrn_time_stamp = time_uptime;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags &= ~SC_SCRN_IDLE;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
if (scrn_blank_time > 0)
run_scrn_saver = TRUE;
}
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if ((saver_mode != CONS_LKM_SAVER) || !(sc->flags & SC_SCRN_IDLE))
if (sc->flags & SC_SCRN_BLANKED)
stop_scrn_saver(sc, current_saver);
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif
Swapped "should we just return" and "should we stop the screensaver" in scrn_timer() to avoid deadlock with graphical screensavers.
1998-04-16 09:41:55 +00:00
/* should we just return ? */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->blink_in_progress || sc->switch_in_progress
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
|| sc->write_in_progress)
goto done;
Swapped "should we just return" and "should we stop the screensaver" in scrn_timer() to avoid deadlock with graphical screensavers.
1998-04-16 09:41:55 +00:00
/* Update the screen */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp = sc->cur_scp; /* cur_scp may have changed... */
- Define a convenience macro ISTTYOPEN(). - Slightly refine screen saver logic. No functional change. MFC after: 2 weeks
2001-07-12 11:43:29 +00:00
if (!ISGRAPHSC(scp) && !(sc->flags & SC_SCRN_BLANKED))
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
scrn_update(scp, TRUE);
Swapped "should we just return" and "should we stop the screensaver" in scrn_timer() to avoid deadlock with graphical screensavers.
1998-04-16 09:41:55 +00:00
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
/* should we activate the screen saver? */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if ((saver_mode == CONS_LKM_SAVER) && (sc->flags & SC_SCRN_IDLE))
if (!ISGRAPHSC(scp) || (sc->flags & SC_SCRN_BLANKED))
(*current_saver)(sc, TRUE);
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
done:
if (again) {
/*
* Use reduced "refresh" rate if we are in graphics and that is not a
* graphical screen saver. In such case we just have nothing to do.
*/
if (ISGRAPHSC(scp) && !(sc->flags & SC_SCRN_BLANKED))
rate = 2;
else
rate = 30;
callout_reset_sbt(&sc->ctimeout, SBT_1S / rate, 0,
scrn_timer, sc, C_PREL(1));
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static int
and_region(int *s1, int *e1, int s2, int e2)
{
if (*e1 < s2 || e2 < *s1)
return FALSE;
*s1 = imax(*s1, s2);
*e1 = imin(*e1, e2);
return TRUE;
}
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
static void
scrn_update(scr_stat *scp, int show_cursor)
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
int start;
int end;
int s;
int e;
/* assert(scp == scp->sc->cur_scp) */
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_LOCK(scp->sc);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_CUTPASTE
/* remove the previous mouse pointer image if necessary */
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
if (scp->status & MOUSE_VISIBLE) {
s = scp->mouse_pos;
e = scp->mouse_pos + scp->xsize + 1;
if ((scp->status & (MOUSE_MOVED | MOUSE_HIDDEN))
|| and_region(&s, &e, scp->start, scp->end)
|| ((scp->status & CURSOR_ENABLED) &&
Fix longstanding mouse cursor bug: blinking and eating all CPU while near text cursor. The reason is: mouse cursor goes into hide/visible loop while text cursor even not moved. PR: 25536 Submitted by: David Xu <davidx@viasoft.com.cn>
2001-03-06 00:02:47 +00:00
(scp->cursor_pos != scp->cursor_oldpos) &&
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
(and_region(&s, &e, scp->cursor_pos, scp->cursor_pos)
|| and_region(&s, &e, scp->cursor_oldpos, scp->cursor_oldpos)))) {
sc_remove_mouse_image(scp);
if (scp->end >= scp->xsize*scp->ysize)
scp->end = scp->xsize*scp->ysize - 1;
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
#endif /* !SC_NO_CUTPASTE */
#if 1
/* debug: XXX */
if (scp->end >= scp->xsize*scp->ysize) {
printf("scrn_update(): scp->end %d > size_of_screen!!\n", scp->end);
scp->end = scp->xsize*scp->ysize - 1;
}
if (scp->start < 0) {
printf("scrn_update(): scp->start %d < 0\n", scp->start);
scp->start = 0;
}
#endif
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
/* update screen image */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->start <= scp->end) {
if (scp->mouse_cut_end >= 0) {
/* there is a marked region for cut & paste */
if (scp->mouse_cut_start <= scp->mouse_cut_end) {
start = scp->mouse_cut_start;
end = scp->mouse_cut_end;
} else {
start = scp->mouse_cut_end;
end = scp->mouse_cut_start - 1;
}
s = start;
e = end;
/* does the cut-mark region overlap with the update region? */
if (and_region(&s, &e, scp->start, scp->end)) {
(*scp->rndr->draw)(scp, s, e - s + 1, TRUE);
s = 0;
e = start - 1;
if (and_region(&s, &e, scp->start, scp->end))
(*scp->rndr->draw)(scp, s, e - s + 1, FALSE);
s = end + 1;
e = scp->xsize*scp->ysize - 1;
if (and_region(&s, &e, scp->start, scp->end))
(*scp->rndr->draw)(scp, s, e - s + 1, FALSE);
} else {
(*scp->rndr->draw)(scp, scp->start,
scp->end - scp->start + 1, FALSE);
}
} else {
(*scp->rndr->draw)(scp, scp->start,
scp->end - scp->start + 1, FALSE);
}
}
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
/* we are not to show the cursor and the mouse pointer... */
if (!show_cursor) {
scp->end = 0;
Add support for VESA mode 0x102 (800x600x4) in syscons. You can activate this using option "-b" to the boot blocks. It is smartest to compile a font into your kernel (See LINT), but not mandatory, but apart from the cursor you will see nothing on the screen until you load a font. This mode allows XF86_VGA16 to run in 800x600 mode on otherwise unsupported graphics hardware. A number of buglets in the cursor handling in syscons may become visible this way.
1998-02-12 22:05:08 +00:00
scp->start = scp->xsize*scp->ysize - 1;
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_UNLOCK(scp->sc);
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
return;
}
/* update cursor image */
if (scp->status & CURSOR_ENABLED) {
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
s = scp->start;
e = scp->end;
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
/* did cursor move since last time ? */
if (scp->cursor_pos != scp->cursor_oldpos) {
/* do we need to remove old cursor image ? */
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
if (!and_region(&s, &e, scp->cursor_oldpos, scp->cursor_oldpos))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_remove_cursor_image(scp);
sc_draw_cursor_image(scp);
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
} else {
if (and_region(&s, &e, scp->cursor_pos, scp->cursor_pos))
/* cursor didn't move, but has been overwritten */
sc_draw_cursor_image(scp);
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
else if (scp->curs_attr.flags & CONS_BLINK_CURSOR)
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
/* if it's a blinking cursor, update it */
(*scp->rndr->blink_cursor)(scp, scp->cursor_pos,
sc_inside_cutmark(scp,
scp->cursor_pos));
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
}
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_CUTPASTE
/* update "pseudo" mouse pointer image */
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
if (scp->sc->flags & SC_MOUSE_ENABLED) {
if (!(scp->status & (MOUSE_VISIBLE | MOUSE_HIDDEN))) {
scp->status &= ~MOUSE_MOVED;
sc_draw_mouse_image(scp);
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
#endif /* SC_NO_CUTPASTE */
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
scp->end = 0;
Add support for VESA mode 0x102 (800x600x4) in syscons. You can activate this using option "-b" to the boot blocks. It is smartest to compile a font into your kernel (See LINT), but not mandatory, but apart from the cursor you will see nothing on the screen until you load a font. This mode allows XF86_VGA16 to run in 800x600 mode on otherwise unsupported graphics hardware. A number of buglets in the cursor handling in syscons may become visible this way.
1998-02-12 22:05:08 +00:00
scp->start = scp->xsize*scp->ysize - 1;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_UNLOCK(scp->sc);
- Break scrn_timer() into two pieces. Now screen update is done in a separate routine: scupdate() called from scrn_timer(). - Make sure that the screen is updated for the low-level console routines sccngetc() and sccncheckc(). A new routine, sccnupdate(), is introduced and will call scupdate() above. Requested by: bde and msmith OKed by: sos
1998-02-11 14:58:15 +00:00
}
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scsplash_callback(int event, void *arg)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_softc_t *sc;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
int error;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc = (sc_softc_t *)arg;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
switch (event) {
case SPLASH_INIT:
if (add_scrn_saver(scsplash_saver) == 0) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags &= ~SC_SAVER_FAILED;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
run_scrn_saver = TRUE;
Remove the last vestiges of the userconfig option. None of this actually did anything, so this commit should be considered a NO-OP.
2004-12-01 04:59:33 +00:00
if (cold && !(boothowto & RB_VERBOSE)) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scsplash_stick(TRUE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(*current_saver)(sc, TRUE);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
}
return 0;
case SPLASH_TERM:
if (current_saver == scsplash_saver) {
scsplash_stick(FALSE);
error = remove_scrn_saver(scsplash_saver);
if (error)
return error;
}
return 0;
default:
return EINVAL;
}
}
static void
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scsplash_saver(sc_softc_t *sc, int show)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
{
static int busy = FALSE;
scr_stat *scp;
if (busy)
return;
busy = TRUE;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp = sc->cur_scp;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (show) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!(sc->flags & SC_SAVER_FAILED)) {
if (!(sc->flags & SC_SCRN_BLANKED))
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
set_scrn_saver_mode(scp, -1, NULL, 0);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
switch (splash(sc->adp, TRUE)) {
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
case 0: /* succeeded */
break;
case EAGAIN: /* try later */
restore_scrn_saver_mode(scp, FALSE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_touch_scrn_saver(); /* XXX */
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
break;
default:
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags |= SC_SAVER_FAILED;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scsplash_stick(FALSE);
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
restore_scrn_saver_mode(scp, TRUE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
printf("scsplash_saver(): failed to put up the image\n");
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
break;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
}
} else if (!sticky_splash) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if ((sc->flags & SC_SCRN_BLANKED) && (splash(sc->adp, FALSE) == 0))
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
restore_scrn_saver_mode(scp, TRUE);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
busy = FALSE;
}
static int
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
add_scrn_saver(void (*this_saver)(sc_softc_t *, int))
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#if 0
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
int error;
if (current_saver != none_saver) {
error = remove_scrn_saver(current_saver);
if (error)
return error;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
if (current_saver != none_saver)
return EBUSY;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
run_scrn_saver = FALSE;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
saver_mode = CONS_LKM_SAVER;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
current_saver = this_saver;
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
return 0;
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
remove_scrn_saver(void (*this_saver)(sc_softc_t *, int))
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
{
if (current_saver != this_saver)
return EINVAL;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#if 0
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
/*
* In order to prevent `current_saver' from being called by
* the timeout routine `scrn_timer()' while we manipulate
* the saver list, we shall set `current_saver' to `none_saver'
* before stopping the current saver, rather than blocking by `splXX()'.
*/
current_saver = none_saver;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (scrn_blanked)
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
stop_scrn_saver(this_saver);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
/* unblank all blanked screens */
wait_scrn_saver_stop(NULL);
if (scrn_blanked)
return EBUSY;
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
current_saver = none_saver;
return 0;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
}
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int
set_scrn_saver_mode(scr_stat *scp, int mode, u_char *pal, int border)
{
int s;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* assert(scp == scp->sc->cur_scp) */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
s = spltty();
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISGRAPHSC(scp))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_remove_cursor_image(scp);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scp->splash_save_mode = scp->mode;
scp->splash_save_status = scp->status & (GRAPHICS_MODE | PIXEL_MODE);
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
scp->status &= ~(GRAPHICS_MODE | PIXEL_MODE);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scp->status |= (UNKNOWN_MODE | SAVER_RUNNING);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->sc->flags |= SC_SCRN_BLANKED;
++scrn_blanked;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
splx(s);
if (mode < 0)
return 0;
scp->mode = mode;
if (set_mode(scp) == 0) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->sc->adp->va_info.vi_flags & V_INFO_GRAPHICS)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scp->status |= GRAPHICS_MODE;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_PALETTE_LOADING
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (pal != NULL)
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_load_palette(scp->sc->adp, pal);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_set_border(scp, border);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
return 0;
} else {
s = spltty();
scp->mode = scp->splash_save_mode;
scp->status &= ~(UNKNOWN_MODE | SAVER_RUNNING);
scp->status |= scp->splash_save_status;
splx(s);
return 1;
}
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
restore_scrn_saver_mode(scr_stat *scp, int changemode)
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
{
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
int mode;
int status;
int s;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* assert(scp == scp->sc->cur_scp) */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
s = spltty();
mode = scp->mode;
status = scp->status;
scp->mode = scp->splash_save_mode;
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
scp->status &= ~(UNKNOWN_MODE | SAVER_RUNNING);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scp->status |= scp->splash_save_status;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->sc->flags &= ~SC_SCRN_BLANKED;
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
if (!changemode) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISGRAPHSC(scp))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_draw_cursor_image(scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
--scrn_blanked;
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
splx(s);
return 0;
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (set_mode(scp) == 0) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_PALETTE_LOADING
Yet another attempt to make palette loading more safer: - Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set and fill it up with default gray-scale palette data for text. Now we don't have to set `hint.sc.0.vesa_mode' to get the default palette data. - Add a new adapter flag, V_ADP_DAC8 to track whether the controller is using 8-bit palette format and load correct palette when switching modes. - Set 8-bit DAC mode only for non-VGA compatible graphics mode.
2010-02-23 21:51:14 +00:00
#ifdef SC_PIXEL_MODE
Refine r204265. We want the standard VGA palette for packed pixel mode.
2010-03-29 22:41:30 +00:00
if (scp->sc->adp->va_info.vi_mem_model == V_INFO_MM_DIRECT)
Yet another attempt to make palette loading more safer: - Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set and fill it up with default gray-scale palette data for text. Now we don't have to set `hint.sc.0.vesa_mode' to get the default palette data. - Add a new adapter flag, V_ADP_DAC8 to track whether the controller is using 8-bit palette format and load correct palette when switching modes. - Set 8-bit DAC mode only for non-VGA compatible graphics mode.
2010-02-23 21:51:14 +00:00
vidd_load_palette(scp->sc->adp, scp->sc->palette2);
else
#endif
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_load_palette(scp->sc->adp, scp->sc->palette);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
--scrn_blanked;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
splx(s);
return 0;
} else {
scp->mode = mode;
scp->status = status;
splx(s);
return 1;
}
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
}
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
static void
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
stop_scrn_saver(sc_softc_t *sc, void (*saver)(sc_softc_t *, int))
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(*saver)(sc, FALSE);
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
run_scrn_saver = FALSE;
/* the screen saver may have chosen not to stop after all... */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->flags & SC_SCRN_BLANKED)
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
return;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
mark_all(sc->cur_scp);
if (sc->delayed_next_scr)
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_switch_scr(sc, sc->delayed_next_scr - 1);
Don't call wakeup() while we are in DDB. The patch was developed by bde. I added the same check in one more place where wakeup() might be called during the DDB session. Submitted by: bde
2001-08-07 11:51:26 +00:00
if (debugger == 0)
More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9).
2003-03-02 16:54:40 +00:00
wakeup(&scrn_blanked);
More fixes to deal with fonts: - Set the correct value scp->font_size in init_scp(). - Set scp->font_size to FONT_NONE for VGA_MODEX. Interim fix for a font problem: - A kludge to display the correct font on some video cards. We should be able to load multiple fonts to the VGA plane #2 and switch between fonts by setting the font select register in the VGA sequencer. It appears that the current code isn't functioning as expected on some VGA cards (I have reports on Millenium and Mach64 cards). This is either a bug in syscons or a hardware compatibility problem ;-< This kludge will always load only one font set at a time and always use the font page #0 on the plane #2. It is an interim kludge until we find the exact cause and solution. Small adjustment for mouse cursor handling: - Turn off the mouse cursor early when changing video modes. Video mode switch fixes: - Stop the screen saver when changing video modes. - Enclose the critical section with a pair of spltty()/splx(). - A kludge to prevent scrn_update() from accessing video memory in less- critical sections in video mode change; artificially turn on the UNKNOWN_MODE flag. PR: bin/5899, bin/5907 Tested by: ache and a couple of users OKed by: sos
1998-04-04 16:26:53 +00:00
}
static int
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
wait_scrn_saver_stop(sc_softc_t *sc)
More fixes to deal with fonts: - Set the correct value scp->font_size in init_scp(). - Set scp->font_size to FONT_NONE for VGA_MODEX. Interim fix for a font problem: - A kludge to display the correct font on some video cards. We should be able to load multiple fonts to the VGA plane #2 and switch between fonts by setting the font select register in the VGA sequencer. It appears that the current code isn't functioning as expected on some VGA cards (I have reports on Millenium and Mach64 cards). This is either a bug in syscons or a hardware compatibility problem ;-< This kludge will always load only one font set at a time and always use the font page #0 on the plane #2. It is an interim kludge until we find the exact cause and solution. Small adjustment for mouse cursor handling: - Turn off the mouse cursor early when changing video modes. Video mode switch fixes: - Stop the screen saver when changing video modes. - Enclose the critical section with a pair of spltty()/splx(). - A kludge to prevent scrn_update() from accessing video memory in less- critical sections in video mode change; artificially turn on the UNKNOWN_MODE flag. PR: bin/5899, bin/5907 Tested by: ache and a couple of users OKed by: sos
1998-04-04 16:26:53 +00:00
{
int error = 0;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
while (scrn_blanked > 0) {
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
run_scrn_saver = FALSE;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc && !(sc->flags & SC_SCRN_BLANKED)) {
error = 0;
break;
}
More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9).
2003-03-02 16:54:40 +00:00
error = tsleep(&scrn_blanked, PZERO | PCATCH, "scrsav", 0);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if ((error != 0) && (error != ERESTART))
More fixes to deal with fonts: - Set the correct value scp->font_size in init_scp(). - Set scp->font_size to FONT_NONE for VGA_MODEX. Interim fix for a font problem: - A kludge to display the correct font on some video cards. We should be able to load multiple fonts to the VGA plane #2 and switch between fonts by setting the font select register in the VGA sequencer. It appears that the current code isn't functioning as expected on some VGA cards (I have reports on Millenium and Mach64 cards). This is either a bug in syscons or a hardware compatibility problem ;-< This kludge will always load only one font set at a time and always use the font page #0 on the plane #2. It is an interim kludge until we find the exact cause and solution. Small adjustment for mouse cursor handling: - Turn off the mouse cursor early when changing video modes. Video mode switch fixes: - Stop the screen saver when changing video modes. - Enclose the critical section with a pair of spltty()/splx(). - A kludge to prevent scrn_update() from accessing video memory in less- critical sections in video mode change; artificially turn on the UNKNOWN_MODE flag. PR: bin/5899, bin/5907 Tested by: ache and a couple of users OKed by: sos
1998-04-04 16:26:53 +00:00
break;
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
run_scrn_saver = FALSE;
More fixes to deal with fonts: - Set the correct value scp->font_size in init_scp(). - Set scp->font_size to FONT_NONE for VGA_MODEX. Interim fix for a font problem: - A kludge to display the correct font on some video cards. We should be able to load multiple fonts to the VGA plane #2 and switch between fonts by setting the font select register in the VGA sequencer. It appears that the current code isn't functioning as expected on some VGA cards (I have reports on Millenium and Mach64 cards). This is either a bug in syscons or a hardware compatibility problem ;-< This kludge will always load only one font set at a time and always use the font page #0 on the plane #2. It is an interim kludge until we find the exact cause and solution. Small adjustment for mouse cursor handling: - Turn off the mouse cursor early when changing video modes. Video mode switch fixes: - Stop the screen saver when changing video modes. - Enclose the critical section with a pair of spltty()/splx(). - A kludge to prevent scrn_update() from accessing video memory in less- critical sections in video mode change; artificially turn on the UNKNOWN_MODE flag. PR: bin/5899, bin/5907 Tested by: ache and a couple of users OKed by: sos
1998-04-04 16:26:53 +00:00
return error;
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
}
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif /* DEV_SPLASH */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
void
sc_touch_scrn_saver(void)
{
scsplash_stick(FALSE);
run_scrn_saver = FALSE;
}
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
int
sc_switch_scr(sc_softc_t *sc, u_int next_scr)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
scr_stat *cur_scp;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
struct tty *tp;
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
struct proc *p;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
int s;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
DPRINTF(5, ("sc0: sc_switch_scr() %d ", next_scr + 1));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
Fix a panic that occurs when resuming. For some reason, sc->cur_scp is NULL. Submitted by: Andrew Thompson <andy@fud.org.nz>
2003-10-29 20:48:13 +00:00
if (sc->cur_scp == NULL)
return (0);
Add a VT_LOCKSWITCH ioctl that disallows vty switching. Something like this can be emulated by VT_SETMODEing to VT_PROCESS and never releasing the vty, but this has a number of problems, most notably that a process must stay resident for the lock to be in effect. Reviewed by: roam, sheldonh
2002-07-10 03:29:38 +00:00
/* prevent switch if previously requested */
if (sc->flags & SC_SCRN_VTYLOCK) {
sc_bell(sc->cur_scp, sc->cur_scp->bell_pitch,
sc->cur_scp->bell_duration);
return EPERM;
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* delay switch if the screen is blanked or being updated */
if ((sc->flags & SC_SCRN_BLANKED) || sc->write_in_progress
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
|| sc->blink_in_progress) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->delayed_next_scr = next_scr + 1;
- Examine the error code from the screen saver and act accordingly. 0 success EAGAIN try again later other don't call this screen saver again - Test flags consistently to examine the status of the screen saver. scrn_blanked: the screen saver is running scp->status & SAVER_RUNNING: the saver is running in this vty - Correctlyu preserve status flag bits in set/restore_scrn_saver_mdoe().
1999-01-17 14:23:15 +00:00
sc_touch_scrn_saver();
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("switch delayed\n"));
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
return 0;
}
Sometimes the vty switching has to be delayed; the vty to be switched to is saved in sc->delayed_next_scr and the actual switch is performed later. It was possible to get into the endless loop when attempting to switch to a closed vty (which is not allowed and beep-alerted when attempted) and when the visual beep was in effect. This caused sc->delayed_next_scr to never be reset and endless attempts to switch to a closed vty and endless visual beeping. How to repeat: - boot into single-user - run "kbdcontrol -b visual" - quickly press Alt+F2 two times PR: kern/68016 X-MFC after: 6.2-RELEASE
2006-11-06 19:06:07 +00:00
sc->delayed_next_scr = 0;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
s = spltty();
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
cur_scp = sc->cur_scp;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* we are in the middle of the vty switching process... */
if (sc->switch_in_progress
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
&& (cur_scp->smode.mode == VT_PROCESS)
&& cur_scp->proc) {
p = pfind(cur_scp->pid);
if (cur_scp->proc != p) {
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
if (p)
PROC_UNLOCK(p);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/*
* The controlling process has died!!. Do some clean up.
* NOTE:`cur_scp->proc' and `cur_scp->smode.mode'
* are not reset here yet; they will be cleared later.
*/
DPRINTF(5, ("cur_scp controlling process %d died, ",
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
cur_scp->pid));
if (cur_scp->status & SWITCH_WAIT_REL) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/*
* Force the previous switch to finish, but return now
* with error.
*/
DPRINTF(5, ("reset WAIT_REL, "));
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
finish_vt_rel(cur_scp, TRUE, &s);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
splx(s);
DPRINTF(5, ("finishing previous switch\n"));
return EINVAL;
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
} else if (cur_scp->status & SWITCH_WAIT_ACQ) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* let's assume screen switch has been completed. */
DPRINTF(5, ("reset WAIT_ACQ, "));
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
finish_vt_acq(cur_scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
} else {
/*
* We are in between screen release and acquisition, and
* reached here via scgetc() or scrn_timer() which has
* interrupted exchange_scr(). Don't do anything stupid.
*/
DPRINTF(5, ("waiting nothing, "));
}
} else {
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
if (p)
PROC_UNLOCK(p);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/*
* The controlling process is alive, but not responding...
* It is either buggy or it may be just taking time.
* The following code is a gross kludge to cope with this
* problem for which there is no clean solution. XXX
*/
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if (cur_scp->status & SWITCH_WAIT_REL) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
switch (sc->switch_in_progress++) {
case 1:
break;
case 2:
DPRINTF(5, ("sending relsig again, "));
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
signal_vt_rel(cur_scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
break;
case 3:
break;
case 4:
default:
/*
- Fail VT switching when the controlling program, such as the X server, is not responding to the VT switching protocol. (This part of the code has been somewhat wrong in -CURRENT, but -STABLE has the correct code...)
1999-11-28 07:44:11 +00:00
* Act as if the controlling program returned
* VT_FALSE.
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
*/
DPRINTF(5, ("force reset WAIT_REL, "));
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
finish_vt_rel(cur_scp, FALSE, &s);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
splx(s);
- Fail VT switching when the controlling program, such as the X server, is not responding to the VT switching protocol. (This part of the code has been somewhat wrong in -CURRENT, but -STABLE has the correct code...)
1999-11-28 07:44:11 +00:00
DPRINTF(5, ("act as if VT_FALSE was seen\n"));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return EINVAL;
}
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
} else if (cur_scp->status & SWITCH_WAIT_ACQ) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
switch (sc->switch_in_progress++) {
case 1:
break;
case 2:
DPRINTF(5, ("sending acqsig again, "));
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
signal_vt_acq(cur_scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
break;
case 3:
break;
case 4:
default:
/* clear the flag and finish the previous switch */
DPRINTF(5, ("force reset WAIT_ACQ, "));
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
finish_vt_acq(cur_scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
break;
}
}
}
}
/*
* Return error if an invalid argument is given, or vty switch
* is still in progress.
*/
if ((next_scr < sc->first_vty) || (next_scr >= sc->first_vty + sc->vtys)
|| sc->switch_in_progress) {
splx(s);
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
sc_bell(cur_scp, bios_value.bell_pitch, BELL_DURATION);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("error 1\n"));
return EINVAL;
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/*
* Don't allow switching away from the graphics mode vty
* if the switch mode is VT_AUTO, unless the next vty is the same
* as the current or the current vty has been closed (but showing).
*/
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tp = SC_DEV(sc, cur_scp->index);
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
if ((cur_scp->index != next_scr)
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
&& tty_opened_ns(tp)
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
&& (cur_scp->smode.mode == VT_AUTO)
&& ISGRAPHSC(cur_scp)) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
splx(s);
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
sc_bell(cur_scp, bios_value.bell_pitch, BELL_DURATION);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("error, graphics mode\n"));
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return EINVAL;
}
From: sos@login.dkuug.dk (S|ren Schmidt) Subject: syscons-1.3 Date: Sat, 29 Jan 94 23:33:50 MET But here is the (hopefully) final syscons-1.3.... .... I've changed sgetc so it works as the pccons parallel (it now uses a scgetc internally). [ There were a couple changes that Bruce Evans sent me that were applied to this version along with some changes that S'ren didn't incorporate into the final version. There will be only minor changes if anything from this version to his final release. ]
1994-02-01 06:22:29 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/*
* Is the wanted vty open? Don't allow switching to a closed vty.
If we are in DDB, don't switch to a vty in the VT_PROCESS mode. MFC after: 2 weeks
2001-06-30 09:10:00 +00:00
* If we are in DDB, don't switch to a vty in the VT_PROCESS mode.
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
* Note that we always allow the user to switch to the kernel
* console even if it is closed.
*/
if ((sc_console == NULL) || (next_scr != sc_console->index)) {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tp = SC_DEV(sc, next_scr);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (!tty_opened_ns(tp)) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
splx(s);
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
sc_bell(cur_scp, bios_value.bell_pitch, BELL_DURATION);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("error 2, requested vty isn't open!\n"));
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return EINVAL;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
if ((debugger > 0) && (SC_STAT(tp)->smode.mode == VT_PROCESS)) {
If we are in DDB, don't switch to a vty in the VT_PROCESS mode. MFC after: 2 weeks
2001-06-30 09:10:00 +00:00
splx(s);
DPRINTF(5, ("error 3, requested vty is in the VT_PROCESS mode\n"));
return EINVAL;
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
Stop the screensaver before switching consoles.
1998-04-17 10:03:11 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* this is the start of vty switching process... */
++sc->switch_in_progress;
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
sc->old_scp = cur_scp;
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
sc->new_scp = sc_get_stat(SC_DEV(sc, next_scr));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->new_scp == sc->old_scp) {
sc->switch_in_progress = 0;
Don't call wakeup() while we are in DDB. The patch was developed by bde. I added the same check in one more place where wakeup() might be called during the DDB session. Submitted by: bde
2001-08-07 11:51:26 +00:00
/*
- Change comments and asserts to reflect the removal of the global scheduler lock. Tested by: kris, current@ Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc. Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
2007-06-04 23:57:32 +00:00
* XXX wakeup() locks the scheduler lock which will hang if
* the lock is in an in-between state, e.g., when we stop at
Don't call wakeup() while we are in DDB. The patch was developed by bde. I added the same check in one more place where wakeup() might be called during the DDB session. Submitted by: bde
2001-08-07 11:51:26 +00:00
* a breakpoint at fork_exit. It has always been wrong to call
* wakeup() when the debugger is active. In RELENG_4, wakeup()
* is supposed to be locked by splhigh(), but the debugger may
* be invoked at splhigh().
*/
if (debugger == 0)
Improve VT_WAITACTIVE semantics. - Wait for requested vty activation regardless its open state. - Remove redundant console cleanup. Approved by: kib MFC after: 1 week
2008-03-20 04:10:52 +00:00
wakeup(VTY_WCHAN(sc,next_scr));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
splx(s);
DPRINTF(5, ("switch done (new == old)\n"));
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
/* has controlling process died? */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
vt_proc_alive(sc->old_scp);
vt_proc_alive(sc->new_scp);
/* wait for the controlling process to release the screen, if necessary */
if (signal_vt_rel(sc->old_scp)) {
splx(s);
return 0;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* go set up the new vty screen */
splx(s);
exchange_scr(sc);
s = spltty();
/* wake up processes waiting for this vty */
Don't call wakeup() while we are in DDB. The patch was developed by bde. I added the same check in one more place where wakeup() might be called during the DDB session. Submitted by: bde
2001-08-07 11:51:26 +00:00
if (debugger == 0)
Improve VT_WAITACTIVE semantics. - Wait for requested vty activation regardless its open state. - Remove redundant console cleanup. Approved by: kib MFC after: 1 week
2008-03-20 04:10:52 +00:00
wakeup(VTY_WCHAN(sc,next_scr));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* wait for the controlling process to acknowledge, if necessary */
if (signal_vt_acq(sc->cur_scp)) {
splx(s);
return 0;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->switch_in_progress = 0;
if (sc->unit == sc_console_unit)
Eliminate global cons_unavailable flag and replace it by the status bit maintained on a per-device basis. Single variable is inadequate on machines running with multiple consoles enabled.
2004-02-05 01:56:43 +00:00
cnavailable(sc_consptr, TRUE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
splx(s);
DPRINTF(5, ("switch done\n"));
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return 0;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static int
do_switch_scr(sc_softc_t *sc, int s)
{
vt_proc_alive(sc->new_scp);
splx(s);
exchange_scr(sc);
s = spltty();
/* sc->cur_scp == sc->new_scp */
Improve VT_WAITACTIVE semantics. - Wait for requested vty activation regardless its open state. - Remove redundant console cleanup. Approved by: kib MFC after: 1 week
2008-03-20 04:10:52 +00:00
wakeup(VTY_WCHAN(sc,sc->cur_scp->index));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* wait for the controlling process to acknowledge, if necessary */
if (!signal_vt_acq(sc->cur_scp)) {
sc->switch_in_progress = 0;
if (sc->unit == sc_console_unit)
Eliminate global cons_unavailable flag and replace it by the status bit maintained on a per-device basis. Single variable is inadequate on machines running with multiple consoles enabled.
2004-02-05 01:56:43 +00:00
cnavailable(sc_consptr, TRUE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
return s;
}
static int
vt_proc_alive(scr_stat *scp)
{
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
struct proc *p;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->proc) {
Change the pfind() and zpfind() functions to lock the process that they find before releasing the allproc lock and returning. Reviewed by: -smp, dfr, jake
2001-04-24 00:51:53 +00:00
if ((p = pfind(scp->pid)) != NULL)
PROC_UNLOCK(p);
if (scp->proc == p)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return TRUE;
scp->proc = NULL;
scp->smode.mode = VT_AUTO;
DPRINTF(5, ("vt controlling process %d died\n", scp->pid));
}
return FALSE;
}
static int
signal_vt_rel(scr_stat *scp)
{
if (scp->smode.mode != VT_PROCESS)
return FALSE;
scp->status |= SWITCH_WAIT_REL;
Grab the process lock while calling psignal and before calling psignal.
2001-03-07 03:37:06 +00:00
PROC_LOCK(scp->proc);
In order to maximize the re-usability of kernel code in user space this patch modifies makesyscalls.sh to prefix all of the non-compatibility calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel entry points and all places in the code that use them. It also fixes an additional name space collision between the kernel function psignal and the libc function of the same name by renaming the kernel psignal kern_psignal(). By introducing this change now we will ease future MFCs that change syscalls. Reviewed by: rwatson Approved by: re (bz)
2011-09-16 13:58:51 +00:00
kern_psignal(scp->proc, scp->smode.relsig);
Grab the process lock while calling psignal and before calling psignal.
2001-03-07 03:37:06 +00:00
PROC_UNLOCK(scp->proc);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("sending relsig to %d\n", scp->pid));
return TRUE;
}
static int
signal_vt_acq(scr_stat *scp)
{
if (scp->smode.mode != VT_PROCESS)
return FALSE;
if (scp->sc->unit == sc_console_unit)
Eliminate global cons_unavailable flag and replace it by the status bit maintained on a per-device basis. Single variable is inadequate on machines running with multiple consoles enabled.
2004-02-05 01:56:43 +00:00
cnavailable(sc_consptr, FALSE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->status |= SWITCH_WAIT_ACQ;
Grab the process lock while calling psignal and before calling psignal.
2001-03-07 03:37:06 +00:00
PROC_LOCK(scp->proc);
In order to maximize the re-usability of kernel code in user space this patch modifies makesyscalls.sh to prefix all of the non-compatibility calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel entry points and all places in the code that use them. It also fixes an additional name space collision between the kernel function psignal and the libc function of the same name by renaming the kernel psignal kern_psignal(). By introducing this change now we will ease future MFCs that change syscalls. Reviewed by: rwatson Approved by: re (bz)
2011-09-16 13:58:51 +00:00
kern_psignal(scp->proc, scp->smode.acqsig);
Grab the process lock while calling psignal and before calling psignal.
2001-03-07 03:37:06 +00:00
PROC_UNLOCK(scp->proc);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(5, ("sending acqsig to %d\n", scp->pid));
return TRUE;
}
Define a couple of subroutines to replace duplicated common code. You shoulnd't see any functional difference.
2001-07-20 13:10:59 +00:00
static int
finish_vt_rel(scr_stat *scp, int release, int *s)
{
if (scp == scp->sc->old_scp && scp->status & SWITCH_WAIT_REL) {
scp->status &= ~SWITCH_WAIT_REL;
if (release)
*s = do_switch_scr(scp->sc, *s);
else
scp->sc->switch_in_progress = 0;
return 0;
}
return EINVAL;
}
static int
finish_vt_acq(scr_stat *scp)
{
if (scp == scp->sc->new_scp && scp->status & SWITCH_WAIT_ACQ) {
scp->status &= ~SWITCH_WAIT_ACQ;
scp->sc->switch_in_progress = 0;
return 0;
}
return EINVAL;
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
static void
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
exchange_scr(sc_softc_t *sc)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scr_stat *scp;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* save the current state of video and keyboard */
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_move_cursor(sc->old_scp, sc->old_scp->xpos, sc->old_scp->ypos);
- Fix text cursor logic so that multiple instances of the "normal" cursor won't appear on the screen, and "blinking" and "destructive" cursor won't appear in the vty for which the text cursor is currently hidden. Approved by: jkh
2000-02-11 01:19:44 +00:00
if (!ISGRAPHSC(sc->old_scp))
sc_remove_cursor_image(sc->old_scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->old_scp->kbd_mode == K_XLATE)
save_kbd_state(sc->old_scp);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* set up the video for the new screen */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp = sc->cur_scp = sc->new_scp;
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#ifdef PC98
if (sc->old_scp->mode != scp->mode || ISUNKNOWNSC(sc->old_scp) || ISUNKNOWNSC(sc->new_scp))
#else
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->old_scp->mode != scp->mode || ISUNKNOWNSC(sc->old_scp))
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
set_mode(scp);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#ifndef __sparc64__
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
else
sc_vtb_init(&scp->scr, VTB_FRAMEBUFFER, scp->xsize, scp->ysize,
(void *)sc->adp->va_window, FALSE);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#endif
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
scp->status |= MOUSE_HIDDEN;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_move_cursor(scp, scp->xpos, scp->ypos);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISGRAPHSC(scp))
sc_set_cursor_image(scp);
#ifndef SC_NO_PALETTE_LOADING
Yet another attempt to make palette loading more safer: - Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set and fill it up with default gray-scale palette data for text. Now we don't have to set `hint.sc.0.vesa_mode' to get the default palette data. - Add a new adapter flag, V_ADP_DAC8 to track whether the controller is using 8-bit palette format and load correct palette when switching modes. - Set 8-bit DAC mode only for non-VGA compatible graphics mode.
2010-02-23 21:51:14 +00:00
if (ISGRAPHSC(sc->old_scp)) {
#ifdef SC_PIXEL_MODE
Refine r204265. We want the standard VGA palette for packed pixel mode.
2010-03-29 22:41:30 +00:00
if (sc->adp->va_info.vi_mem_model == V_INFO_MM_DIRECT)
Yet another attempt to make palette loading more safer: - Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set and fill it up with default gray-scale palette data for text. Now we don't have to set `hint.sc.0.vesa_mode' to get the default palette data. - Add a new adapter flag, V_ADP_DAC8 to track whether the controller is using 8-bit palette format and load correct palette when switching modes. - Set 8-bit DAC mode only for non-VGA compatible graphics mode.
2010-02-23 21:51:14 +00:00
vidd_load_palette(sc->adp, sc->palette2);
else
#endif
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_load_palette(sc->adp, sc->palette);
Yet another attempt to make palette loading more safer: - Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set and fill it up with default gray-scale palette data for text. Now we don't have to set `hint.sc.0.vesa_mode' to get the default palette data. - Add a new adapter flag, V_ADP_DAC8 to track whether the controller is using 8-bit palette format and load correct palette when switching modes. - Set 8-bit DAC mode only for non-VGA compatible graphics mode.
2010-02-23 21:51:14 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_set_border(scp, scp->border);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* set up the keyboard for the new screen */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->old_scp->kbd_mode != scp->kbd_mode)
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(sc->kbd, KDSKBMODE, (caddr_t)&scp->kbd_mode);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
update_kbd_state(scp, scp->status, LOCK_MASK);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
mark_all(scp);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
syscons: make sc_puts static as it is used only privately Perhaps sc_puts should also be renamed to scputs to follow the implied naming conventions in the file... MFC after: 2 weeks
2011-12-11 21:10:11 +00:00
static void
Make a 1:1 mapping between syscons stats and terminal emulators. After I imported libteken into the source tree, I noticed syscons didn't store the cursor position inside the terminal emulator, but inside the virtual terminal stat. This is not very useful, because when you implement more complex forms of line wrapping, you need to keep track of more state than just the cursor position. Because the kernel messages didn't share the same terminal emulator as ttyv0, this caused a lot of strange things, like kernel messages being misplaced and a missing notification to resize the terminal emulator for kernel messages never to be resized when using vidcontrol. This patch just removes kernel_console_ts and adds a special parameter to te_puts to determine whether messages should be printed using regular colors or the ones for kernel messages. Reported by: ache Tested by: nyan, garga (older version)
2009-03-10 11:28:54 +00:00
sc_puts(scr_stat *scp, u_char *buf, int len, int kernel)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
Serialize output routine of terminal emulator (te_puts()) by a lock. - The output routine of low level console is not protected by any lock by default. - Increment and decrement of sc->write_in_progress are not atomic and this may cause console hang. - We also have many other states used by emulator that should be protected by the lock. - This change does not fix interspersed messages which PRINTF_BUFR_SIZE kernel option should fix. Approved by: re (bmah) MFC after: 1 week
2007-09-20 04:05:59 +00:00
int need_unlock = 0;
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
/* make screensaver happy */
Add some functionality via sysctl to syscons. hw.syscons.saver.keybonly: used to specify that only input is to interrupt the screensaver. This allows one to run a chatty console app but still have the screen blank out until a key is pressed. There should probably also be an ioctl for this, we'll do that later. hw.syscons.saver.blanktime: exports the screensaver timeout via sysctl. Submitted by: Olivier Houchard <doginou@cognet.ci0.org>
2002-04-05 17:53:25 +00:00
if (!sticky_splash && scp == scp->sc->cur_scp && !sc_saver_keyb_only)
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
run_scrn_saver = FALSE;
Tidy up a few warnings when used without splash. (things defined but not used)
1999-07-01 20:43:03 +00:00
#endif
Screen saver related fixes. 1. Add new interface, add_scrn_saver()/remove_scrn_saver(), to declare loading/unloading of a screen saver. The screen saver calls these functions to notify syscons of loading/unloading events. It was possible to load multiple savers each of which will try to remember the previous saver in a local variable (`old_saver'). The scheme breaks easily if the user load two savers and unload them in a wrong order; if the first saver is unloaded first, `old_saver' in the second saver points to nowhere. Now only one screen saver is allowed in memory at a time. Soeren will be looking into this issue again later. syscons is becoming too heavy. It's time to cut things down, rather than adding more... 2. Make scrn_timer() to be the primary caller of the screen saver (*current_saver)(). scintr(), scioctl() and ansi_put() update `scrn_time_stamp' to indicate that they want to stop the screen saver. There are three exceptions, however. One is remove_scrn_saver() which need to stop the current screen saver if it is running. To guard against scrn_timer() calling the saver during this operation, `current_saver' is set to `none_saver' early. The others are sccngetc() and sccncheckc(); they will unblank the screen too. When the kernel enters DDB (via the hot key or a break point), the screen saver will be stopped by sccngetc(). However, we have a reentrancy problem here. If the system has been in the middle of the screen saver... (The screen saver reentrancy problem has always been with sccnputc() and sccngetc() in the -current source. So, the new code is doing no worse, I reckon.) 3. Use `mono_time' rather than `time'. 4. Make set_border() work for EGA and CGA in addition to VGA. Do nothing for MDA. Changes to the LKM screen saver modules will follow shortly. YOU NEED TO RECOMPILE BOTH SCREEN SAVERS AND KERNEL AS OF THESE CHANGES. Reviewed by: sos and bde
1997-07-15 14:43:27 +00:00
Serialize output routine of terminal emulator (te_puts()) by a lock. - The output routine of low level console is not protected by any lock by default. - Increment and decrement of sc->write_in_progress are not atomic and this may cause console hang. - We also have many other states used by emulator that should be protected by the lock. - This change does not fix interspersed messages which PRINTF_BUFR_SIZE kernel option should fix. Approved by: re (bmah) MFC after: 1 week
2007-09-20 04:05:59 +00:00
if (scp->tsw) {
if (!kdb_active && !mtx_owned(&scp->scr_lock)) {
need_unlock = 1;
mtx_lock_spin(&scp->scr_lock);
}
Make a 1:1 mapping between syscons stats and terminal emulators. After I imported libteken into the source tree, I noticed syscons didn't store the cursor position inside the terminal emulator, but inside the virtual terminal stat. This is not very useful, because when you implement more complex forms of line wrapping, you need to keep track of more state than just the cursor position. Because the kernel messages didn't share the same terminal emulator as ttyv0, this caused a lot of strange things, like kernel messages being misplaced and a missing notification to resize the terminal emulator for kernel messages never to be resized when using vidcontrol. This patch just removes kernel_console_ts and adds a special parameter to te_puts to determine whether messages should be printed using regular colors or the ones for kernel messages. Reported by: ache Tested by: nyan, garga (older version)
2009-03-10 11:28:54 +00:00
(*scp->tsw->te_puts)(scp, buf, len, kernel);
Serialize output routine of terminal emulator (te_puts()) by a lock. - The output routine of low level console is not protected by any lock by default. - Increment and decrement of sc->write_in_progress are not atomic and this may cause console hang. - We also have many other states used by emulator that should be protected by the lock. - This change does not fix interspersed messages which PRINTF_BUFR_SIZE kernel option should fix. Approved by: re (bmah) MFC after: 1 week
2007-09-20 04:05:59 +00:00
if (need_unlock)
mtx_unlock_spin(&scp->scr_lock);
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->sc->delayed_next_scr)
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_switch_scr(scp->sc, scp->sc->delayed_next_scr - 1);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
void
sc_draw_cursor_image(scr_stat *scp)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* assert(scp == scp->sc->cur_scp); */
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_LOCK(scp->sc);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(*scp->rndr->draw_cursor)(scp, scp->cursor_pos,
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
scp->curs_attr.flags & CONS_BLINK_CURSOR, TRUE,
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_inside_cutmark(scp, scp->cursor_pos));
- Fix text cursor logic so that multiple instances of the "normal" cursor won't appear on the screen, and "blinking" and "destructive" cursor won't appear in the vty for which the text cursor is currently hidden. Approved by: jkh
2000-02-11 01:19:44 +00:00
scp->cursor_oldpos = scp->cursor_pos;
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_UNLOCK(scp->sc);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
void
sc_remove_cursor_image(scr_stat *scp)
- When the system is shut down, switch to the vty0 if possible. - Don't try to ring bell when system is going down. Beacuse the clock code is about to be stopped, the timeout routine won't be called anymore.
1998-08-03 09:18:58 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* assert(scp == scp->sc->cur_scp); */
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_LOCK(scp->sc);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(*scp->rndr->draw_cursor)(scp, scp->cursor_oldpos,
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
scp->curs_attr.flags & CONS_BLINK_CURSOR, FALSE,
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_inside_cutmark(scp, scp->cursor_oldpos));
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_UNLOCK(scp->sc);
- When the system is shut down, switch to the vty0 if possible. - Don't try to ring bell when system is going down. Beacuse the clock code is about to be stopped, the timeout routine won't be called anymore.
1998-08-03 09:18:58 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static void
update_cursor_image(scr_stat *scp)
Make comp_vgaregs() less strict about VGA register values when checking the BIOS video mode paramter table. Now syscons uses the parameter table even if some bits in the table are different from the current VGA register settings. Even if comp_vgaregs() finds that the BIOS video parameter table looks totally unfamiliar to it, syscons allows the user to change the current video mode to some modes which are based on the VGA 80x25 mode. They are VGA 80x30, VGA 80x50, VGA 80x60. In this case the user will be warned, during boot, that video mode switching is only paritally supported on his machine. PR: bin/4477
1997-11-21 11:37:07 +00:00
{
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
/* assert(scp == scp->sc->cur_scp); */
sc_remove_cursor_image(scp);
sc_set_cursor_image(scp);
sc_draw_cursor_image(scp);
}
Make comp_vgaregs() less strict about VGA register values when checking the BIOS video mode paramter table. Now syscons uses the parameter table even if some bits in the table are different from the current VGA register settings. Even if comp_vgaregs() finds that the BIOS video parameter table looks totally unfamiliar to it, syscons allows the user to change the current video mode to some modes which are based on the VGA 80x25 mode. They are VGA 80x30, VGA 80x50, VGA 80x60. In this case the user will be warned, during boot, that video mode switching is only paritally supported on his machine. PR: bin/4477
1997-11-21 11:37:07 +00:00
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
void
sc_set_cursor_image(scr_stat *scp)
{
scp->curs_attr.flags = scp->curr_curs_attr.flags;
if (scp->curs_attr.flags & CONS_HIDDEN_CURSOR) {
/* hidden cursor is internally represented as zero-height underline */
scp->curs_attr.flags = CONS_CHAR_CURSOR;
scp->curs_attr.base = scp->curs_attr.height = 0;
} else if (scp->curs_attr.flags & CONS_CHAR_CURSOR) {
scp->curs_attr.base = imin(scp->curr_curs_attr.base,
scp->font_size - 1);
scp->curs_attr.height = imin(scp->curr_curs_attr.height,
scp->font_size - scp->curs_attr.base);
} else { /* block cursor */
scp->curs_attr.base = 0;
scp->curs_attr.height = scp->font_size;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
/* assert(scp == scp->sc->cur_scp); */
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_LOCK(scp->sc);
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
(*scp->rndr->set_cursor)(scp, scp->curs_attr.base, scp->curs_attr.height,
scp->curs_attr.flags & CONS_BLINK_CURSOR);
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_UNLOCK(scp->sc);
Make comp_vgaregs() less strict about VGA register values when checking the BIOS video mode paramter table. Now syscons uses the parameter table even if some bits in the table are different from the current VGA register settings. Even if comp_vgaregs() finds that the BIOS video parameter table looks totally unfamiliar to it, syscons allows the user to change the current video mode to some modes which are based on the VGA 80x25 mode. They are VGA 80x30, VGA 80x50, VGA 80x60. In this case the user will be warned, during boot, that video mode switching is only paritally supported on his machine. PR: bin/4477
1997-11-21 11:37:07 +00:00
}
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
static void
change_cursor_shape(scr_stat *scp, int flags, int base, int height)
{
if ((scp == scp->sc->cur_scp) && !ISGRAPHSC(scp))
sc_remove_cursor_image(scp);
if (base >= 0)
scp->curr_curs_attr.base = base;
if (height >= 0)
scp->curr_curs_attr.height = height;
if (flags & CONS_RESET_CURSOR)
scp->curr_curs_attr = scp->dflt_curs_attr;
else
scp->curr_curs_attr.flags = flags & CONS_CURSOR_ATTRS;
if ((scp == scp->sc->cur_scp) && !ISGRAPHSC(scp)) {
sc_set_cursor_image(scp);
sc_draw_cursor_image(scp);
}
}
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
void
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
sc_change_cursor_shape(scr_stat *scp, int flags, int base, int height)
Make comp_vgaregs() less strict about VGA register values when checking the BIOS video mode paramter table. Now syscons uses the parameter table even if some bits in the table are different from the current VGA register settings. Even if comp_vgaregs() finds that the BIOS video parameter table looks totally unfamiliar to it, syscons allows the user to change the current video mode to some modes which are based on the VGA 80x25 mode. They are VGA 80x30, VGA 80x50, VGA 80x60. In this case the user will be warned, during boot, that video mode switching is only paritally supported on his machine. PR: bin/4477
1997-11-21 11:37:07 +00:00
{
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
sc_softc_t *sc;
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
struct tty *tp;
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
int s;
int i;
s = spltty();
if ((flags != -1) && (flags & CONS_LOCAL_CURSOR)) {
/* local (per vty) change */
change_cursor_shape(scp, flags, base, height);
splx(s);
return;
Make comp_vgaregs() less strict about VGA register values when checking the BIOS video mode paramter table. Now syscons uses the parameter table even if some bits in the table are different from the current VGA register settings. Even if comp_vgaregs() finds that the BIOS video parameter table looks totally unfamiliar to it, syscons allows the user to change the current video mode to some modes which are based on the VGA 80x25 mode. They are VGA 80x30, VGA 80x50, VGA 80x60. In this case the user will be warned, during boot, that video mode switching is only paritally supported on his machine. PR: bin/4477
1997-11-21 11:37:07 +00:00
}
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
/* global change */
sc = scp->sc;
if (base >= 0)
sc->curs_attr.base = base;
if (height >= 0)
sc->curs_attr.height = height;
if (flags != -1) {
if (flags & CONS_RESET_CURSOR)
sc->curs_attr = sc->dflt_curs_attr;
else
sc->curs_attr.flags = flags & CONS_CURSOR_ATTRS;
}
for (i = sc->first_vty; i < sc->first_vty + sc->vtys; ++i) {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
if ((tp = SC_DEV(sc, i)) == NULL)
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
continue;
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
if ((scp = sc_get_stat(tp)) == NULL)
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
continue;
scp->dflt_curs_attr = sc->curs_attr;
change_cursor_shape(scp, CONS_RESET_CURSOR, -1, -1);
}
splx(s);
Make comp_vgaregs() less strict about VGA register values when checking the BIOS video mode paramter table. Now syscons uses the parameter table even if some bits in the table are different from the current VGA register settings. Even if comp_vgaregs() finds that the BIOS video parameter table looks totally unfamiliar to it, syscons allows the user to change the current video mode to some modes which are based on the VGA 80x25 mode. They are VGA 80x30, VGA 80x50, VGA 80x60. In this case the user will be warned, during boot, that video mode switching is only paritally supported on his machine. PR: bin/4477
1997-11-21 11:37:07 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static void
scinit(int unit, int flags)
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
{
Fix echo in console mode.
2004-10-14 08:58:28 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/*
* When syscons is being initialized as the kernel console, malloc()
* is not yet functional, because various kernel structures has not been
* fully initialized yet. Therefore, we need to declare the following
* static buffers for the console. This is less than ideal,
* but is necessry evil for the time being. XXX
*/
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#ifdef PC98
static u_short sc_buffer[ROW*COL*2];/* XXX */
#else
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static u_short sc_buffer[ROW*COL]; /* XXX */
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_FONT_LOADING
static u_char font_8[256*8];
static u_char font_14[256*14];
static u_char font_16[256*16];
#endif
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_softc_t *sc;
scr_stat *scp;
video_adapter_t *adp;
int col;
int row;
int i;
/* one time initialization */
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (init_done == COLD)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_get_bios_values(&bios_value);
init_done = WARM;
/*
* Allocate resources. Even if we are being called for the second
* time, we must allocate them again, because they might have
* disappeared...
*/
sc = sc_get_softc(unit, flags & SC_KERNEL_CONSOLE);
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
if ((sc->flags & SC_INIT_DONE) == 0)
SC_VIDEO_LOCKINIT(sc);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
adp = NULL;
if (sc->adapter >= 0) {
vid_release(sc->adp, (void *)&sc->adapter);
adp = sc->adp;
sc->adp = NULL;
}
if (sc->keyboard >= 0) {
DPRINTF(5, ("sc%d: releasing kbd%d\n", unit, sc->keyboard));
i = kbd_release(sc->kbd, (void *)&sc->keyboard);
DPRINTF(5, ("sc%d: kbd_release returned %d\n", unit, i));
if (sc->kbd != NULL) {
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
DPRINTF(5, ("sc%d: kbd != NULL!, index:%d, unit:%d, flags:0x%x\n",
unit, sc->kbd->kb_index, sc->kbd->kb_unit, sc->kbd->kb_flags));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
sc->kbd = NULL;
}
sc->adapter = vid_allocate("*", unit, (void *)&sc->adapter);
sc->adp = vid_get_adapter(sc->adapter);
/* assert((sc->adapter >= 0) && (sc->adp != NULL)) */
Integrate kbdmux(4) into syscons(4) and kbd code. By default syscons(4) will look for the kbdmux(4) keyboard first, and then, if not found, look for any keyboard. Current kbd code is modified so if kbdmux(4) is the current keyboard, all new keyboards are automatically added to the kbdmux(4). Switch to kbdmux(4) can be done at boot time, by loading kbdmux module at the loader prompt, or at runtime, by kldload'ing the kbdmux module and releasing current active keyboard. If, for whatever reason, kbdmux(4) is not required/desired then just do not load it and everything should work as before. It is also possible to kldunload kbdmux at runtime and syscons(4) will automatically switch to the first available keyboard. No response from: freebsd-current@ MFC after: 1 day
2006-02-28 23:46:23 +00:00
sc->keyboard = sc_allocate_keyboard(sc, unit);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
DPRINTF(1, ("sc%d: keyboard %d\n", unit, sc->keyboard));
Integrate kbdmux(4) into syscons(4) and kbd code. By default syscons(4) will look for the kbdmux(4) keyboard first, and then, if not found, look for any keyboard. Current kbd code is modified so if kbdmux(4) is the current keyboard, all new keyboards are automatically added to the kbdmux(4). Switch to kbdmux(4) can be done at boot time, by loading kbdmux module at the loader prompt, or at runtime, by kldload'ing the kbdmux module and releasing current active keyboard. If, for whatever reason, kbdmux(4) is not required/desired then just do not load it and everything should work as before. It is also possible to kldunload kbdmux at runtime and syscons(4) will automatically switch to the first available keyboard. No response from: freebsd-current@ MFC after: 1 day
2006-02-28 23:46:23 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->kbd = kbd_get_keyboard(sc->keyboard);
if (sc->kbd != NULL) {
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
DPRINTF(1, ("sc%d: kbd index:%d, unit:%d, flags:0x%x\n",
unit, sc->kbd->kb_index, sc->kbd->kb_unit, sc->kbd->kb_flags));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
if (!(sc->flags & SC_INIT_DONE) || (adp != sc->adp)) {
sc->initial_mode = sc->adp->va_initial_mode;
#ifndef SC_NO_FONT_LOADING
if (flags & SC_KERNEL_CONSOLE) {
sc->font_8 = font_8;
sc->font_14 = font_14;
sc->font_16 = font_16;
} else if (sc->font_8 == NULL) {
/* assert(sc_malloc) */
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
sc->font_8 = malloc(sizeof(font_8), M_DEVBUF, M_WAITOK);
sc->font_14 = malloc(sizeof(font_14), M_DEVBUF, M_WAITOK);
sc->font_16 = malloc(sizeof(font_16), M_DEVBUF, M_WAITOK);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
#endif
/* extract the hardware cursor location and hide the cursor for now */
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_read_hw_cursor(sc->adp, &col, &row);
vidd_set_hw_cursor(sc->adp, -1, -1);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* set up the first console */
sc->first_vty = unit*MAXCONS;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc->vtys = MAXCONS; /* XXX: should be configurable */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (flags & SC_KERNEL_CONSOLE) {
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
/*
* Set up devs structure but don't use it yet, calling make_dev()
* might panic kernel. Wait for sc_attach_unit() to actually
* create the devices.
*/
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
sc->dev = main_devs;
scp = &main_console;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
init_scp(sc, sc->first_vty, scp);
sc_vtb_init(&scp->vtb, VTB_MEMORY, scp->xsize, scp->ysize,
(void *)sc_buffer, FALSE);
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
/* move cursors to the initial positions */
if (col >= scp->xsize)
col = 0;
if (row >= scp->ysize)
row = scp->ysize - 1;
scp->xpos = col;
scp->ypos = row;
scp->cursor_pos = scp->cursor_oldpos = row*scp->xsize + col;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (sc_init_emulator(scp, SC_DFLT_TERM))
sc_init_emulator(scp, "*");
(*scp->tsw->te_default_attr)(scp,
Make a 1:1 mapping between syscons stats and terminal emulators. After I imported libteken into the source tree, I noticed syscons didn't store the cursor position inside the terminal emulator, but inside the virtual terminal stat. This is not very useful, because when you implement more complex forms of line wrapping, you need to keep track of more state than just the cursor position. Because the kernel messages didn't share the same terminal emulator as ttyv0, this caused a lot of strange things, like kernel messages being misplaced and a missing notification to resize the terminal emulator for kernel messages never to be resized when using vidcontrol. This patch just removes kernel_console_ts and adds a special parameter to te_puts to determine whether messages should be printed using regular colors or the ones for kernel messages. Reported by: ache Tested by: nyan, garga (older version)
2009-03-10 11:28:54 +00:00
user_default.std_color,
user_default.rev_color);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
} else {
/* assert(sc_malloc) */
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
sc->dev = malloc(sizeof(struct tty *)*sc->vtys, M_DEVBUF,
M_WAITOK|M_ZERO);
Turn consolectl into a simple device node, not a TTY. Apart from the 16 virtual terminals, Syscons allocates two device nodes that should not really be TTYs, even though they are. One of them is consolectl. In RELENG_7 and before, these device nodes are used in single user mode. After I simplified input path, we only use this device node to call ioctl() on (moused, Xorg, vidcontrol). When you call ioctl() on consolectl, it will behave the same as being called on the first window.
2009-05-15 14:30:37 +00:00
sc->dev[0] = sc_alloc_tty(0, unit * MAXCONS);
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
scp = alloc_scp(sc, sc->first_vty);
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
SC_STAT(sc->dev[0]) = scp;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
sc->cur_scp = scp;
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#ifndef __sparc64__
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* copy screen to temporary buffer */
sc_vtb_init(&scp->scr, VTB_FRAMEBUFFER, scp->xsize, scp->ysize,
(void *)scp->sc->adp->va_window, FALSE);
if (ISTEXTSC(scp))
sc_vtb_copy(&scp->scr, 0, &scp->vtb, 0, scp->xsize*scp->ysize);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (bios_value.cursor_end < scp->font_size)
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
sc->dflt_curs_attr.base = scp->font_size -
bios_value.cursor_end - 1;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
else
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
sc->dflt_curs_attr.base = 0;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
i = bios_value.cursor_end - bios_value.cursor_start + 1;
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
sc->dflt_curs_attr.height = imin(i, scp->font_size);
sc->dflt_curs_attr.flags = 0;
sc->curs_attr = sc->dflt_curs_attr;
scp->curr_curs_attr = scp->dflt_curs_attr = sc->curs_attr;
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
#ifndef SC_NO_SYSMOUSE
sc_mouse_move(scp, scp->xpixel/2, scp->ypixel/2);
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISGRAPHSC(scp)) {
sc_set_cursor_image(scp);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_draw_cursor_image(scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
/* save font and palette */
#ifndef SC_NO_FONT_LOADING
sc->fonts_loaded = 0;
if (ISFONTAVAIL(sc->adp->va_flags)) {
#ifdef SC_DFLT_FONT
bcopy(dflt_font_8, sc->font_8, sizeof(dflt_font_8));
bcopy(dflt_font_14, sc->font_14, sizeof(dflt_font_14));
bcopy(dflt_font_16, sc->font_16, sizeof(dflt_font_16));
sc->fonts_loaded = FONT_16 | FONT_14 | FONT_8;
if (scp->font_size < 14) {
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_load_font(scp, 0, 8, 8, sc->font_8, 0, 256);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
} else if (scp->font_size >= 16) {
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_load_font(scp, 0, 16, 8, sc->font_16, 0, 256);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
} else {
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_load_font(scp, 0, 14, 8, sc->font_14, 0, 256);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
#else /* !SC_DFLT_FONT */
if (scp->font_size < 14) {
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_save_font(scp, 0, 8, 8, sc->font_8, 0, 256);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->fonts_loaded = FONT_8;
} else if (scp->font_size >= 16) {
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_save_font(scp, 0, 16, 8, sc->font_16, 0, 256);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->fonts_loaded = FONT_16;
} else {
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_save_font(scp, 0, 14, 8, sc->font_14, 0, 256);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->fonts_loaded = FONT_14;
}
#endif /* SC_DFLT_FONT */
/* FONT KLUDGE: always use the font page #0. XXX */
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_show_font(scp, 0);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
#endif /* !SC_NO_FONT_LOADING */
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_PALETTE_LOADING
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_save_palette(sc->adp, sc->palette);
Yet another attempt to make palette loading more safer: - Add a separate palette data for 8-bit DAC mode when SC_PIXEL_MODE is set and fill it up with default gray-scale palette data for text. Now we don't have to set `hint.sc.0.vesa_mode' to get the default palette data. - Add a new adapter flag, V_ADP_DAC8 to track whether the controller is using 8-bit palette format and load correct palette when switching modes. - Set 8-bit DAC mode only for non-VGA compatible graphics mode.
2010-02-23 21:51:14 +00:00
#ifdef SC_PIXEL_MODE
for (i = 0; i < sizeof(sc->palette2); i++)
sc->palette2[i] = i / 3;
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
Just because we have a serial console attached does not mean we don't want a splash screen. There seems to be some confusion in the syscons code as to the meaning of the SC_KERNEL_CONSOLE flag. Its absence is sometimes interpreted to mean "I am not the system console", and sometimes to mean "I am not the only VGA console" (see the font loading code for an example of the latter). Someone with better syscons fu than myself should take a closer look.
2004-08-05 23:54:04 +00:00
if (!(sc->flags & SC_SPLASH_SCRN)) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* we are ready to put up the splash image! */
splash_init(sc->adp, scsplash_callback, sc);
sc->flags |= SC_SPLASH_SCRN;
}
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
/* the rest is not necessary, if we have done it once */
if (sc->flags & SC_INIT_DONE)
return;
/* initialize mapscrn arrays to a one to one map */
for (i = 0; i < sizeof(sc->scr_map); i++)
sc->scr_map[i] = sc->scr_rmap[i] = i;
Merge pc98 support from sys/pc98/pc98/syscons.c.
2003-08-25 07:48:42 +00:00
#ifdef PC98
sc->scr_map[0x5c] = (u_char)0xfc; /* for backslash */
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->flags |= SC_INIT_DONE;
}
static void
scterm(int unit, int flags)
{
sc_softc_t *sc;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
scr_stat *scp;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc = sc_get_softc(unit, flags & SC_KERNEL_CONSOLE);
if (sc == NULL)
return; /* shouldn't happen */
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* this console is no longer available for the splash screen */
if (sc->flags & SC_SPLASH_SCRN) {
splash_term(sc->adp);
sc->flags &= ~SC_SPLASH_SCRN;
}
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#if 0 /* XXX */
/* move the hardware cursor to the upper-left corner */
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_set_hw_cursor(sc->adp, 0, 0);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
/* release the keyboard and the video card */
if (sc->keyboard >= 0)
kbd_release(sc->kbd, &sc->keyboard);
if (sc->adapter >= 0)
vid_release(sc->adp, &sc->adapter);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
/* stop the terminal emulator, if any */
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
scp = sc_get_stat(sc->dev[0]);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (scp->tsw)
(*scp->tsw->te_term)(scp, &scp->ts);
if (scp->ts != NULL)
free(scp->ts, M_DEVBUF);
Serialize output routine of terminal emulator (te_puts()) by a lock. - The output routine of low level console is not protected by any lock by default. - Increment and decrement of sc->write_in_progress are not atomic and this may cause console hang. - We also have many other states used by emulator that should be protected by the lock. - This change does not fix interspersed messages which PRINTF_BUFR_SIZE kernel option should fix. Approved by: re (bmah) MFC after: 1 week
2007-09-20 04:05:59 +00:00
mtx_destroy(&scp->scr_lock);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* clear the structure */
if (!(flags & SC_KERNEL_CONSOLE)) {
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
/* XXX: We need delete_dev() for this */
free(sc->dev, M_DEVBUF);
register tty devices so they will look right in pstat.
1999-08-08 21:35:17 +00:00
#if 0
/* XXX: We need a ttyunregister for this */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
free(sc->tty, M_DEVBUF);
#endif
#ifndef SC_NO_FONT_LOADING
free(sc->font_8, M_DEVBUF);
free(sc->font_14, M_DEVBUF);
free(sc->font_16, M_DEVBUF);
#endif
/* XXX vtb, history */
}
bzero(sc, sizeof(*sc));
sc->keyboard = -1;
sc->adapter = -1;
}
static void
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
scshutdown(__unused void *arg, __unused int howto)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
{
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
KASSERT(sc_console != NULL, ("sc_console != NULL"));
KASSERT(sc_console->sc != NULL, ("sc_console->sc != NULL"));
KASSERT(sc_console->sc->cur_scp != NULL,
("sc_console->sc->cur_scp != NULL"));
sc_touch_scrn_saver();
if (!cold &&
sc_console->sc->cur_scp->index != sc_console->index &&
sc_console->sc->cur_scp->smode.mode == VT_AUTO &&
sc_console->smode.mode == VT_AUTO)
sc_switch_scr(sc_console->sc, sc_console->index);
shutdown_in_progress = TRUE;
}
static void
scsuspend(__unused void *arg)
{
int retry;
KASSERT(sc_console != NULL, ("sc_console != NULL"));
KASSERT(sc_console->sc != NULL, ("sc_console->sc != NULL"));
KASSERT(sc_console->sc->cur_scp != NULL,
("sc_console->sc->cur_scp != NULL"));
sc_susp_scr = sc_console->sc->cur_scp->index;
if (sc_no_suspend_vtswitch ||
sc_susp_scr == sc_console->index) {
sc_touch_scrn_saver();
sc_susp_scr = -1;
return;
}
for (retry = 0; retry < 10; retry++) {
sc_switch_scr(sc_console->sc, sc_console->index);
if (!sc_console->sc->switch_in_progress)
break;
pause("scsuspend", hz);
}
suspend_in_progress = TRUE;
}
static void
scresume(__unused void *arg)
{
KASSERT(sc_console != NULL, ("sc_console != NULL"));
KASSERT(sc_console->sc != NULL, ("sc_console->sc != NULL"));
KASSERT(sc_console->sc->cur_scp != NULL,
("sc_console->sc->cur_scp != NULL"));
suspend_in_progress = FALSE;
if (sc_susp_scr < 0) {
Reload font when syscons(4) is resuming without switching mode. Reported by: adrian (more than a year ago) Prodded by: adrian (less than a month ago)
2013-07-17 23:29:56 +00:00
update_font(sc_console->sc->cur_scp);
Move VT switching hack for suspend/resume from bus drivers to syscons.c using event handlers. A different version was Submitted by: Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
return;
}
sc_switch_scr(sc_console->sc, sc_susp_scr);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
int
sc_clean_up(scr_stat *scp)
{
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
int error;
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
- Define a convenience macro ISTTYOPEN(). - Slightly refine screen saver logic. No functional change. MFC after: 2 weeks
2001-07-12 11:43:29 +00:00
if (scp->sc->flags & SC_SCRN_BLANKED) {
sc_touch_scrn_saver();
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
- Define a convenience macro ISTTYOPEN(). - Slightly refine screen saver logic. No functional change. MFC after: 2 weeks
2001-07-12 11:43:29 +00:00
if ((error = wait_scrn_saver_stop(scp->sc)))
return error;
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif
- Define a convenience macro ISTTYOPEN(). - Slightly refine screen saver logic. No functional change. MFC after: 2 weeks
2001-07-12 11:43:29 +00:00
}
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
scp->status |= MOUSE_HIDDEN;
sc_remove_mouse_image(scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_remove_cutmarking(scp);
return 0;
}
void
sc_alloc_scr_buffer(scr_stat *scp, int wait, int discard)
{
sc_vtb_t new;
sc_vtb_t old;
old = scp->vtb;
sc_vtb_init(&new, VTB_MEMORY, scp->xsize, scp->ysize, NULL, wait);
if (!discard && (old.vtb_flags & VTB_VALID)) {
/* retain the current cursor position and buffer contants */
scp->cursor_oldpos = scp->cursor_pos;
/*
* This works only if the old buffer has the same size as or larger
* than the new one. XXX
*/
sc_vtb_copy(&old, 0, &new, 0, scp->xsize*scp->ysize);
scp->vtb = new;
} else {
scp->vtb = new;
sc_vtb_destroy(&old);
}
#ifndef SC_NO_SYSMOUSE
/* move the mouse cursor at the center of the screen */
sc_mouse_move(scp, scp->xpixel / 2, scp->ypixel / 2);
#endif
Make comp_vgaregs() less strict about VGA register values when checking the BIOS video mode paramter table. Now syscons uses the parameter table even if some bits in the table are different from the current VGA register settings. Even if comp_vgaregs() finds that the BIOS video parameter table looks totally unfamiliar to it, syscons allows the user to change the current video mode to some modes which are based on the VGA 80x25 mode. They are VGA 80x30, VGA 80x50, VGA 80x60. In this case the user will be warned, during boot, that video mode switching is only paritally supported on his machine. PR: bin/4477
1997-11-21 11:37:07 +00:00
}
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
static scr_stat
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
*alloc_scp(sc_softc_t *sc, int vty)
First round in syscons update. Several new features has been added: No kernel config options anymore besides keyboard language layout. Virtual consoles are now dynamically allocated, no NCONS anymore. Software cursor blinking/nonblinking. Visual bell for laptops (don't beep at meetings :-). Cursor/bell default type setable via config "flags" instead of as defines. Cursor/bell type setable via ioctl's. New video modes 80x30 80x60 for some laptops, and those with multisync monitors. Scroll-lock history (length currently fixed at 100 lines). Lots of cleanups, some only commented out for now (will goaway soon). Support for new features in vidcontrol/kbdcontrol. Updated manpages.
1995-01-12 11:47:05 +00:00
{
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
scr_stat *scp;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* assert(sc_malloc) */
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
scp = (scr_stat *)malloc(sizeof(scr_stat), M_DEVBUF, M_WAITOK);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
init_scp(sc, vty, scp);
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
sc_alloc_scr_buffer(scp, TRUE, TRUE);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
if (sc_init_emulator(scp, SC_DFLT_TERM))
sc_init_emulator(scp, "*");
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
Unbreak LINT.
2000-04-03 09:24:16 +00:00
#ifndef SC_NO_CUTPASTE
Fix dependencies between kernel options: - When both SC_PIXEL_MODE and SC_NO_FONT_LOADING are defined, quietly drop SC_NO_FONT_LOADING, because the pixel(raster) console requires font. - When SC_NO_FONT_LOADING is defined, force SC_ALT_MOUSE_IMAGE. Without font, the arrow-shaped mouse cursor cannot be drawn. - Fiddle and simplify some internal macros. MFC after: 2 weeks
2001-07-10 14:13:34 +00:00
sc_alloc_cut_buffer(scp, TRUE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
#ifndef SC_NO_HISTORY
- Fixed memory leak in sc_alloc_history_buffer(). - Correctly observe the variable `extra_history_size' when changing the size of history (scroll back) buffer. - Added sc_free_history_buffer(). Pointed out by: des
1999-07-07 13:48:50 +00:00
sc_alloc_history_buffer(scp, 0, 0, TRUE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
return scp;
First round in syscons update. Several new features has been added: No kernel config options anymore besides keyboard language layout. Virtual consoles are now dynamically allocated, no NCONS anymore. Software cursor blinking/nonblinking. Visual bell for laptops (don't beep at meetings :-). Cursor/bell default type setable via config "flags" instead of as defines. Cursor/bell type setable via ioctl's. New video modes 80x30 80x60 for some laptops, and those with multisync monitors. Scroll-lock history (length currently fixed at 100 lines). Lots of cleanups, some only commented out for now (will goaway soon). Support for new features in vidcontrol/kbdcontrol. Updated manpages.
1995-01-12 11:47:05 +00:00
}
static void
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
init_scp(sc_softc_t *sc, int vty, scr_stat *scp)
First round in syscons update. Several new features has been added: No kernel config options anymore besides keyboard language layout. Virtual consoles are now dynamically allocated, no NCONS anymore. Software cursor blinking/nonblinking. Visual bell for laptops (don't beep at meetings :-). Cursor/bell default type setable via config "flags" instead of as defines. Cursor/bell type setable via ioctl's. New video modes 80x30 80x60 for some laptops, and those with multisync monitors. Scroll-lock history (length currently fixed at 100 lines). Lots of cleanups, some only commented out for now (will goaway soon). Support for new features in vidcontrol/kbdcontrol. Updated manpages.
1995-01-12 11:47:05 +00:00
{
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
video_info_t info;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
bzero(scp, sizeof(*scp));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->index = vty;
scp->sc = sc;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
scp->status = 0;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->mode = sc->initial_mode;
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_get_info(sc->adp, scp->mode, &info);
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
if (info.vi_flags & V_INFO_GRAPHICS) {
scp->status |= GRAPHICS_MODE;
scp->xpixel = info.vi_width;
scp->ypixel = info.vi_height;
Turn on TGA support. Submitted by: Andrew M. Miklic <AndrwMklc@cs.com>
2002-04-13 22:34:16 +00:00
scp->xsize = info.vi_width/info.vi_cwidth;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
scp->ysize = info.vi_height/info.vi_cheight;
Fix wrong usage of FONT_NONE. It was not meant to be set in scp->font_size in the first place. It is redundant now and is removed. Found by: bde
2000-01-20 13:21:47 +00:00
scp->font_size = 0;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->font = NULL;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
} else {
scp->xsize = info.vi_width;
scp->ysize = info.vi_height;
Turn on TGA support. Submitted by: Andrew M. Miklic <AndrwMklc@cs.com>
2002-04-13 22:34:16 +00:00
scp->xpixel = scp->xsize*info.vi_cwidth;
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
scp->ypixel = scp->ysize*info.vi_cheight;
Extend the usage of sc(4)'s hint variable 'flag'. Bit 0x80 now means "set vesa mode" and higher 16bits of the flag would be the desired mode. One can now set, for instance, hint.sc.0.flags=0x01680180, which means that the system should set VESA mode 0x168 upon boot. Submitted by: paradox <ddkprog yahoo com>, swell k at gmail.com with some minor changes.
2009-09-11 02:07:24 +00:00
}
Clean up code a bit to make it more readable.
2010-11-29 22:20:44 +00:00
scp->font_size = info.vi_cheight;
scp->font_width = info.vi_cwidth;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_FONT_LOADING
Clean up code a bit to make it more readable.
2010-11-29 22:20:44 +00:00
if (info.vi_cheight < 14)
scp->font = sc->font_8;
else if (info.vi_cheight >= 16)
scp->font = sc->font_16;
else
scp->font = sc->font_14;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#else
Clean up code a bit to make it more readable.
2010-11-29 22:20:44 +00:00
scp->font = NULL;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
Extend the usage of sc(4)'s hint variable 'flag'. Bit 0x80 now means "set vesa mode" and higher 16bits of the flag would be the desired mode. One can now set, for instance, hint.sc.0.flags=0x01680180, which means that the system should set VESA mode 0x168 upon boot. Submitted by: paradox <ddkprog yahoo com>, swell k at gmail.com with some minor changes.
2009-09-11 02:07:24 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_vtb_init(&scp->vtb, VTB_MEMORY, 0, 0, NULL, FALSE);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#ifndef __sparc64__
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_vtb_init(&scp->scr, VTB_FRAMEBUFFER, 0, 0, NULL, FALSE);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#endif
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
scp->xoff = scp->yoff = 0;
Add save/restore cursor as pr SCO screen(HW) manpage. Fix ESC[2J to not move cursor home Clear mouse cutmarking on more cases. Minor changes by me. Submitted by: ache
1997-01-23 20:00:45 +00:00
scp->xpos = scp->ypos = 0;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->start = scp->xsize * scp->ysize - 1;
Optimized the way physical screen updates are done. Now only update what has actually been touched. This should speed up screen access on slow hardware. Introduced setting of "destructive" cursor size, much like the old hardware cursor.
1995-03-29 20:55:03 +00:00
scp->end = 0;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
scp->tsw = NULL;
scp->ts = NULL;
scp->rndr = NULL;
- Not every architecture defaults to a black background (e.g. sparc64 uses white) so base the color of the border on SC_NORM_ATTR rather than hardcoding BG_BLACK. - Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
scp->border = (SC_NORM_ATTR >> 4) & 0x0f;
Refine cursor type/shape control escape sequences and ioctls. We can now add ve, vi and vs capabilities to cons25 in termcap. Discussed with and tested by: ache
2001-08-02 08:30:40 +00:00
scp->curr_curs_attr = scp->dflt_curs_attr = sc->curs_attr;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->mouse_cut_start = scp->xsize*scp->ysize;
scp->mouse_cut_end = -1;
Change the way moused talk to syscons, now its only delivering mouseevents via an ioctl (MOUSE_ACTION). Fixed a couple of bugs (destructive cursor, uncut, jitter). Now applications can use the mouse via the MOUSE_MODE ioctl, its possible to have a signal sent on mouseevents, makeing an event loop in the application take over mouseevents.
1996-06-25 08:54:57 +00:00
scp->mouse_signal = 0;
scp->mouse_pid = 0;
scp->mouse_proc = NULL;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
scp->kbd_mode = K_XLATE;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->bell_pitch = bios_value.bell_pitch;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
scp->bell_duration = BELL_DURATION;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->status |= (bios_value.shift_state & NLKED);
- Fix SC_ALT_MOUSE_IMAGE; don't blink the mouse cursor. - Fix non-destructive, underline text cursor.
2000-03-31 16:05:46 +00:00
scp->status |= CURSOR_ENABLED | MOUSE_HIDDEN;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
scp->pid = 0;
scp->proc = NULL;
scp->smode.mode = VT_AUTO;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->history = NULL;
scp->history_pos = 0;
scp->history_size = 0;
Serialize output routine of terminal emulator (te_puts()) by a lock. - The output routine of low level console is not protected by any lock by default. - Increment and decrement of sc->write_in_progress are not atomic and this may cause console hang. - We also have many other states used by emulator that should be protected by the lock. - This change does not fix interspersed messages which PRINTF_BUFR_SIZE kernel option should fix. Approved by: re (bmah) MFC after: 1 week
2007-09-20 04:05:59 +00:00
mtx_init(&scp->scr_lock, "scrlock", NULL, MTX_SPIN);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
}
int
sc_init_emulator(scr_stat *scp, char *name)
{
sc_term_sw_t *sw;
sc_rndr_sw_t *rndr;
void *p;
int error;
if (name == NULL) /* if no name is given, use the current emulator */
sw = scp->tsw;
else /* ...otherwise find the named emulator */
sw = sc_term_match(name);
if (sw == NULL)
return EINVAL;
Third round in syscons update. Display update method changed, now allways write in memory buffer, then periodically update physical display. Speed improvements (now > 5 times faster than the old syscons). History now circular buffer, with changeable size. History scroll by up/down line, up/down page, home and end. Backtab proberly implemented. Now space for 96 function keys, 63 allocated standard, default now SCO/SYSV compat again as in the old days. New keyboard definition files ~share/syscons/keymaps/* Misc fixes for old "hacks" that broke SCO/SYSV compat. More that I forgot before writing this...
1995-01-28 22:18:05 +00:00
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
rndr = NULL;
if (strcmp(sw->te_renderer, "*") != 0) {
rndr = sc_render_match(scp, sw->te_renderer,
scp->status & (GRAPHICS_MODE | PIXEL_MODE));
}
if (rndr == NULL) {
rndr = sc_render_match(scp, scp->sc->adp->va_name,
scp->status & (GRAPHICS_MODE | PIXEL_MODE));
if (rndr == NULL)
return ENODEV;
}
if (sw == scp->tsw) {
error = (*sw->te_init)(scp, &scp->ts, SC_TE_WARM_INIT);
scp->rndr = rndr;
Add VESA mode support for syscons, which enables the support of 15, 16, 24, and 32 bit modes. To use that, syscons(4) must be built with the compile time option 'options SC_PIXEL_MODE', and VESA support (a.k.a. vesa.ko) must be either loaded, or be compiled into the kernel. Do not return EINVAL when the mouse state is changed to what it already is, which seems to cause problems when you have two mice attached, and applications are not likely obtain useful information through the EINVAL caused by showing the mouse pointer twice. Teach vidcontrol(8) about mode names like MODE_<NUMBER>, where <NUMBER> is the video mode number from the vidcontrol -i mode output. Also, revert the video mode if something fails. Obtained from: DragonFlyBSD Discussed at: current@ with patch attached [1] PR: kern/71142 [2] Submitted by: Xuefeng DENG <dsnofe at msn com> [1], Cyrille Lefevre <cyrille dot lefevre at laposte dot net> [2]
2005-05-29 08:43:44 +00:00
scp->rndr->init(scp);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_clear_screen(scp);
/* assert(error == 0); */
return error;
}
if (sc_malloc && (sw->te_size > 0))
p = malloc(sw->te_size, M_DEVBUF, M_NOWAIT);
else
p = NULL;
error = (*sw->te_init)(scp, &p, SC_TE_COLD_INIT);
if (error)
return error;
if (scp->tsw)
(*scp->tsw->te_term)(scp, &scp->ts);
if (scp->ts != NULL)
free(scp->ts, M_DEVBUF);
scp->tsw = sw;
scp->ts = p;
scp->rndr = rndr;
Add VESA mode support for syscons, which enables the support of 15, 16, 24, and 32 bit modes. To use that, syscons(4) must be built with the compile time option 'options SC_PIXEL_MODE', and VESA support (a.k.a. vesa.ko) must be either loaded, or be compiled into the kernel. Do not return EINVAL when the mouse state is changed to what it already is, which seems to cause problems when you have two mice attached, and applications are not likely obtain useful information through the EINVAL caused by showing the mouse pointer twice. Teach vidcontrol(8) about mode names like MODE_<NUMBER>, where <NUMBER> is the video mode number from the vidcontrol -i mode output. Also, revert the video mode if something fails. Obtained from: DragonFlyBSD Discussed at: current@ with patch attached [1] PR: kern/71142 [2] Submitted by: Xuefeng DENG <dsnofe at msn com> [1], Cyrille Lefevre <cyrille dot lefevre at laposte dot net> [2]
2005-05-29 08:43:44 +00:00
scp->rndr->init(scp);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
/* XXX */
(*sw->te_default_attr)(scp, user_default.std_color, user_default.rev_color);
sc_clear_screen(scp);
return 0;
Third round in syscons update. Display update method changed, now allways write in memory buffer, then periodically update physical display. Speed improvements (now > 5 times faster than the old syscons). History now circular buffer, with changeable size. History scroll by up/down line, up/down page, home and end. Backtab proberly implemented. Now space for 96 function keys, 63 allocated standard, default now SCO/SYSV compat again as in the old days. New keyboard definition files ~share/syscons/keymaps/* Misc fixes for old "hacks" that broke SCO/SYSV compat. More that I forgot before writing this...
1995-01-28 22:18:05 +00:00
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
/*
Use the calibrated/adjustable i8254 frequency `timer_freq' instead of TIMER_FREQ. Fixed missing splx() in scrn_timer(). The bug was harmless because of the undocumented behaviour that the ipl is automatically restored for timeout functions (see softclock()). Perhaps we should depend on this behaviour. Fixed the ddb fix in rev.1.176. The in_debugger flag was no use because it only works when the debugger is entered via the keyboard hotkey. The debugger may be entered for breakpoints and traps, and the console putc routine has no way of knowing when it was, so the console putc routine must (almost?) always remove the cursor image. Not fixed: console switching in ddb doesn't work (ISTR it working), and console 0 shouldn't be switched to for the debugger hotkey unless console 0 is /dev/console. Fixed side effects from calling add_keyboard_randomness() in the console getc routine by not calling it. add_keyboard_randomness() currently always reenables interrupts on 386's and 486's. This is very bad if the console getc routine is called from the debugger and the debugger was entered with interrupts disabled. Fixed preservation of initial screen and now-bogus comment about it. It was broken by setting the initial scr_buf to `buffer' instead of Crtat. `buffer' was full of nulls and the first scroll cleared everything above the things written through syscons. Submitted by: bruce (bde@freebsd.org)
1996-10-26 20:16:58 +00:00
* scgetc(flags) - get character from keyboard.
* If flags & SCGETC_CN, then avoid harmful side effects.
* If flags & SCGETC_NONBLOCK, then wait until a key is pressed, else
* return NOKEY if there is nothing there.
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
*/
Fixed the userconfig problem (and one with ddb as well). The rudimentary support for a splash page is there, and works, it just needs a splash page...
1996-10-02 22:00:38 +00:00
static u_int
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scgetc(sc_softc_t *sc, u_int flags)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scr_stat *scp;
Wrap two declarations that are only used in an #ifdef in their own #ifdef. Reviewed by: bde
1999-08-17 22:06:17 +00:00
#ifndef SC_NO_HISTORY
- Clear relevant variables when the keyboard is not available. - Do not touch the `tty' struct when it's not yet available. - Initialize correct bits in `fonts_loaded'.
1999-07-18 06:16:53 +00:00
struct tty *tp;
Wrap two declarations that are only used in an #ifdef in their own #ifdef. Reviewed by: bde
1999-08-17 22:06:17 +00:00
#endif
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
u_int c;
int this_scr;
int f;
int i;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->kbd == NULL)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
return NOKEY;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
next_code:
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#if 1
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* I don't like this, but... XXX */
if (flags & SCGETC_CN)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sccnupdate(sc->cur_scp);
#endif
scp = sc->cur_scp;
Finally a start at sharing the kdb controller routines between syscons and psm, curtesy Kazutaka Yokota with minor changes by me. This contains an update of the psm driver as well. This also fixes the breakage that I introduced to the psm driver by making syscons poll for keyboard events in the atempt to fix the hanging keyboard problem. It works perfectly for me, and I'd like to hear from all that have had keyboard/ps/2 mouse problems if this is the cure... Submitted by: Kazutaka YOKOTA (yokota@zodiac.mech.utsunomiya-u.ac.jp)
1996-11-14 22:19:17 +00:00
/* first see if there is something in the keyboard port */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
for (;;) {
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
c = kbdd_read_char(sc->kbd, !(flags & SCGETC_NONBLOCK));
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (c == ERRKEY) {
if (!(flags & SCGETC_CN))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_bell(scp, bios_value.bell_pitch, BELL_DURATION);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
} else if (c == NOKEY)
return c;
else
break;
Fix the hanging keyboard problem under Xaccel. Apprently we are loosing an interrupt somewhere. The solution here is to check for keyboard input each time the screen update timer ticks. Not pretty, but works.
1996-11-04 21:01:08 +00:00
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
- Ignore KBD_RAW_MODE and KBD_CODE_MODE in scgetc() when it's called from the low-level console routines sccngetc() and sccncheckc(). Submitted by: bde (a long time ago) - Don't try to ring bell and immediately return from do_bell() while device probe is in progress at boot time; the timeout queue is not functional yet. PR: kern/2424 - Stop running the screen saver after panic() is called: check if `panicstr' is non-NULL during scrn_timer(). PR: kern/5314 - A new option: SC_DISABLE_REBOOT The reboot key (usually Ctl-Alt-Del) will be ignored if this option is defined. You may still have the reboot key defined in the keymap and it won't cause error when the keymap is loaded, but it will be quietly treated as nop. OKed by: sos
1998-02-11 14:56:02 +00:00
/* make screensaver happy */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (!(c & RELKEY))
sc_touch_scrn_saver();
- Ignore KBD_RAW_MODE and KBD_CODE_MODE in scgetc() when it's called from the low-level console routines sccngetc() and sccncheckc(). Submitted by: bde (a long time ago) - Don't try to ring bell and immediately return from do_bell() while device probe is in progress at boot time; the timeout queue is not functional yet. PR: kern/2424 - Stop running the screen saver after panic() is called: check if `panicstr' is non-NULL during scrn_timer(). PR: kern/5314 - A new option: SC_DISABLE_REBOOT The reboot key (usually Ctl-Alt-Del) will be ignored if this option is defined. You may still have the reboot key defined in the keymap and it won't cause error when the keymap is loaded, but it will be quietly treated as nop. OKed by: sos
1998-02-11 14:56:02 +00:00
Don't break the ability to debug the kernel when gathering entropy. Pointed out by: bde
2000-07-16 09:25:04 +00:00
if (!(flags & SCGETC_CN))
Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
2013-10-04 06:55:06 +00:00
random_harvest(&c, sizeof(c), 1, RANDOM_KEYBOARD);
Add entropy-harvesting calls. /dev/random now has new-and-improved entropy!
2000-07-09 12:26:38 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->kbd_mode != K_XLATE)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
return KEYCHAR(c);
Add a new keyboard mode K_CODE. Returns a single byte for each key much like the scancode mode. However the keys that (for no good reason) returns extension codes etc, are translated into singlebyte codes. Needed by libvgl. This makes life ALOT easier, also the XFree86 folks could use this.
1997-10-01 20:46:29 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
/* if scroll-lock pressed allow history browsing */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISGRAPHSC(scp) && scp->history && scp->status & SLKED) {
scp->status &= ~CURSOR_ENABLED;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_remove_cursor_image(scp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_HISTORY
if (!(scp->status & BUFFER_SAVED)) {
scp->status |= BUFFER_SAVED;
sc_hist_save(scp);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
switch (c) {
/* FIXME: key codes */
case SPCLKEY | FKEY | F(49): /* home key */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_remove_cutmarking(scp);
sc_hist_home(scp);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
goto next_code;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case SPCLKEY | FKEY | F(57): /* end key */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_remove_cutmarking(scp);
sc_hist_end(scp);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
goto next_code;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case SPCLKEY | FKEY | F(50): /* up arrow key */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_remove_cutmarking(scp);
if (sc_hist_up_line(scp))
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (!(flags & SCGETC_CN))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_bell(scp, bios_value.bell_pitch, BELL_DURATION);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
goto next_code;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case SPCLKEY | FKEY | F(58): /* down arrow key */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_remove_cutmarking(scp);
if (sc_hist_down_line(scp))
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (!(flags & SCGETC_CN))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_bell(scp, bios_value.bell_pitch, BELL_DURATION);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
goto next_code;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case SPCLKEY | FKEY | F(51): /* page up key */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_remove_cutmarking(scp);
for (i=0; i<scp->ysize; i++)
if (sc_hist_up_line(scp)) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (!(flags & SCGETC_CN))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_bell(scp, bios_value.bell_pitch, BELL_DURATION);
Updated syscons to 0.2b - please test this! It won't be in the ALPHA release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
goto next_code;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case SPCLKEY | FKEY | F(59): /* page down key */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_remove_cutmarking(scp);
for (i=0; i<scp->ysize; i++)
if (sc_hist_down_line(scp)) {
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (!(flags & SCGETC_CN))
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_bell(scp, bios_value.bell_pitch, BELL_DURATION);
Updated syscons to 0.2b - please test this! It won't be in the ALPHA release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
goto next_code;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif /* SC_NO_HISTORY */
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/*
* Process and consume special keys here. Return a plain char code
* or a char code with the META flag or a function key code.
*/
if (c & RELKEY) {
/* key released */
/* goto next_code */
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
} else {
/* key pressed */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (c & SPCLKEY) {
c &= ~SPCLKEY;
switch (KEYCHAR(c)) {
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
/* LOCKING KEYS */
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case NLK: case CLK: case ALK:
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
break;
case SLK:
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(sc->kbd, KDGKBSTATE, (caddr_t)&f);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (f & SLKED) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->status |= SLKED;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
} else {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->status & SLKED) {
scp->status &= ~SLKED;
#ifndef SC_NO_HISTORY
if (scp->status & BUFFER_SAVED) {
if (!sc_hist_restore(scp))
sc_remove_cutmarking(scp);
scp->status &= ~BUFFER_SAVED;
scp->status |= CURSOR_ENABLED;
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_draw_cursor_image(scp);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tp = SC_DEV(sc, scp->index);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (!kdb_active && tty_opened_ns(tp))
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
sctty_outwakeup(tp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#endif
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
}
Updated syscons to 0.2b - please test this! It won't be in the ALPHA release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
break;
Implement keyboard paste PR: 25499 Submitted by: Gaspar Chilingarov <nm@web.am>
2001-03-11 22:51:05 +00:00
case PASTE:
#ifndef SC_NO_CUTPASTE
sc_mouse_paste(scp);
#endif
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
/* NON-LOCKING KEYS */
case NOP:
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case LSH: case RSH: case LCTR: case RCTR:
case LALT: case RALT: case ASH: case META:
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
break;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case BTAB:
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!(sc->flags & SC_SCRN_BLANKED))
return c;
break;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Fix a couble of nasties regarding mouse pointer and different resolutions. Allow middle mouse button to be used for pasting. Also added the beginnings of support for a splash page.
1996-09-30 23:00:58 +00:00
case SPSC:
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#ifdef DEV_SPLASH
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
/* force activatation/deactivation of the screen saver */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!(sc->flags & SC_SCRN_BLANKED)) {
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
run_scrn_saver = TRUE;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc->scrn_time_stamp -= scrn_blank_time;
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
}
if (cold) {
/*
* While devices are being probed, the screen saver need
* to be invoked explictly. XXX
*/
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc->flags & SC_SCRN_BLANKED) {
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
scsplash_stick(FALSE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
stop_scrn_saver(sc, current_saver);
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
} else {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!ISGRAPHSC(scp)) {
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
scsplash_stick(TRUE);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(*current_saver)(sc, TRUE);
1. Reorganized screen saver related code so that both the LKM screen saver and splash screen can all work properly with syscons. Note that the splash screen option (SC_SPLASH_SCREEN) does not work yet, as it requires additional code from msmith. - Reorganized the splash screen code to match the latest development in this area. - Delay screen switch in `switch_scr()' until the screen saver is stopped, if one is running, - Start the screen saver immediately, if any, when the `saver' key is pressed. (There will be another commit for `kbdcontrol' to support this keyword in the keymap file.) - Do not always stop the screen saver when mouse-related ioctls are called. Stop it only if the mouse is moved or buttons are clicked; don't stop it if any other mouse ioctls are called. 2. Added provision to write userland screen savers. (Contact me if you are interested in writing one.) - Added CONS_IDLE, CONS_SAVERMODE, and CONS_SAVERSTART ioctls to support userland screen savers. 3. Some code clean-ups.
1998-08-03 11:30:45 +00:00
}
}
}
Use #ifdef DEV_SPLASH (from opt_splash.h) rather than #if NSPLASH > 0 (from splash.h) to test the presence of the splash driver.
2001-08-02 13:22:33 +00:00
#endif /* DEV_SPLASH */
Fix a couble of nasties regarding mouse pointer and different resolutions. Allow middle mouse button to be used for pasting. Also added the beginnings of support for a splash page.
1996-09-30 23:00:58 +00:00
break;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case RBT:
- Ignore KBD_RAW_MODE and KBD_CODE_MODE in scgetc() when it's called from the low-level console routines sccngetc() and sccncheckc(). Submitted by: bde (a long time ago) - Don't try to ring bell and immediately return from do_bell() while device probe is in progress at boot time; the timeout queue is not functional yet. PR: kern/2424 - Stop running the screen saver after panic() is called: check if `panicstr' is non-NULL during scrn_timer(). PR: kern/5314 - A new option: SC_DISABLE_REBOOT The reboot key (usually Ctl-Alt-Del) will be ignored if this option is defined. You may still have the reboot key defined in the keymap and it won't cause error when the keymap is loaded, but it will be quietly treated as nop. OKed by: sos
1998-02-11 14:56:02 +00:00
#ifndef SC_DISABLE_REBOOT
When SC_DISABLE_KDBKEY or SC_DISABLE_REBOOT are not defined allow the same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey and hw.syscons.kbd_reboot respectively. Apologies to the submitter for taking so long to commit this simple change. PR: kern/72728 Submitted by: Luca Morettoni <morettoni at libero dot it> MFC After: 3 days
2006-01-14 17:57:17 +00:00
if (enable_reboot)
shutdown_nice(0);
- Ignore KBD_RAW_MODE and KBD_CODE_MODE in scgetc() when it's called from the low-level console routines sccngetc() and sccncheckc(). Submitted by: bde (a long time ago) - Don't try to ring bell and immediately return from do_bell() while device probe is in progress at boot time; the timeout queue is not functional yet. PR: kern/2424 - Stop running the screen saver after panic() is called: check if `panicstr' is non-NULL during scrn_timer(). PR: kern/5314 - A new option: SC_DISABLE_REBOOT The reboot key (usually Ctl-Alt-Del) will be ignored if this option is defined. You may still have the reboot key defined in the keymap and it won't cause error when the keymap is loaded, but it will be quietly treated as nop. OKed by: sos
1998-02-11 14:56:02 +00:00
#endif
Remove trailing whitespace.
1995-05-30 08:16:23 +00:00
break;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Add the ability to define a "shutdown" and "shutdown and poweroff" key to syscons. I have a man page to follow describing the format of the kbdmap file. PR: 19273 Reviewed by: sheldonh
2000-09-11 20:37:42 +00:00
case HALT:
#ifndef SC_DISABLE_REBOOT
When SC_DISABLE_KDBKEY or SC_DISABLE_REBOOT are not defined allow the same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey and hw.syscons.kbd_reboot respectively. Apologies to the submitter for taking so long to commit this simple change. PR: kern/72728 Submitted by: Luca Morettoni <morettoni at libero dot it> MFC After: 3 days
2006-01-14 17:57:17 +00:00
if (enable_reboot)
shutdown_nice(RB_HALT);
Add the ability to define a "shutdown" and "shutdown and poweroff" key to syscons. I have a man page to follow describing the format of the kbdmap file. PR: 19273 Reviewed by: sheldonh
2000-09-11 20:37:42 +00:00
#endif
break;
case PDWN:
#ifndef SC_DISABLE_REBOOT
When SC_DISABLE_KDBKEY or SC_DISABLE_REBOOT are not defined allow the same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey and hw.syscons.kbd_reboot respectively. Apologies to the submitter for taking so long to commit this simple change. PR: kern/72728 Submitted by: Luca Morettoni <morettoni at libero dot it> MFC After: 3 days
2006-01-14 17:57:17 +00:00
if (enable_reboot)
shutdown_nice(RB_HALT|RB_POWEROFF);
Add the ability to define a "shutdown" and "shutdown and poweroff" key to syscons. I have a man page to follow describing the format of the kbdmap file. PR: 19273 Reviewed by: sheldonh
2000-09-11 20:37:42 +00:00
#endif
break;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
case SUSP:
Some fix for the recent apm module changes. - Now that apm loadable module can inform its existence to other kernel components (e.g. i386/isa/clock.c:startrtclock()'s TCS hack). - Exchange priority of SI_SUB_CPU and SI_SUB_KLD for above purpose. - Add simple arbitration mechanism for APM vs. ACPI. This prevents the kernel enables both of them. - Remove obsolete `#ifdef DEV_APM' related code. - Add abstracted interface for Powermanagement operations. Public apm(4) functions, such as apm_suspend(), should be replaced new interfaces. Currently only power_pm_suspend (successor of apm_suspend) is implemented. Reviewed by: peter, arch@ and audit@
2001-11-01 16:34:07 +00:00
power_pm_suspend(POWER_SLEEP_STATE_SUSPEND);
Add the ability to suspend as well as hibernate to the system. This is the kernel part of my commits, the userlevel stuff will be done in a separate commit. Add the ability to suspend as well as hibernate to syscons. Create a new virtual key like hibernate for suspend. Update apm_bios.h to define more apm bios goodies.
1998-07-06 06:29:07 +00:00
break;
case STBY:
Some fix for the recent apm module changes. - Now that apm loadable module can inform its existence to other kernel components (e.g. i386/isa/clock.c:startrtclock()'s TCS hack). - Exchange priority of SI_SUB_CPU and SI_SUB_KLD for above purpose. - Add simple arbitration mechanism for APM vs. ACPI. This prevents the kernel enables both of them. - Remove obsolete `#ifdef DEV_APM' related code. - Add abstracted interface for Powermanagement operations. Public apm(4) functions, such as apm_suspend(), should be replaced new interfaces. Currently only power_pm_suspend (successor of apm_suspend) is implemented. Reviewed by: peter, arch@ and audit@
2001-11-01 16:34:07 +00:00
power_pm_suspend(POWER_SLEEP_STATE_STANDBY);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
break;
case DBG:
Update for the KDB framework. Sanitize the alpha console code now that it's in the way even more. Basicly: remove all alpha specific console support from gfb(4), sio(4) and syscons(4). Rewrite the alpha console initialization to be identical to all other platforms. In a nutshell: call cninit(). The platform specific code now only sets or clears RB_SERIAL and thus automaticly causes the right console to be selected. sio.c: o Replace the remote GDB hacks and use the GDB debug port interface instead. o Make debugging code conditional upon KDB instead of DDB. o Call kdb_alt_break() instead of db_alt_break(). o Call kdb_enter() instead of breakpoint(). o Remove the ugly compatibility of using the console as the debug port.
2004-07-10 22:29:41 +00:00
#ifndef SC_DISABLE_KDBKEY
When SC_DISABLE_KDBKEY or SC_DISABLE_REBOOT are not defined allow the same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey and hw.syscons.kbd_reboot respectively. Apologies to the submitter for taking so long to commit this simple change. PR: kern/72728 Submitted by: Luca Morettoni <morettoni at libero dot it> MFC After: 3 days
2006-01-14 17:57:17 +00:00
if (enable_kdbkey)
Attempt to make break-to-debugger and alternative break-to-debugger more accessible: (1) Always compile in support for breaking into the debugger if options KDB is present in the kernel. (2) Disable both by default, but allow them to be enabled via tunables and sysctls debug.kdb.break_to_debugger and debug.kdb.alt_break_to_debugger. (3) options BREAK_TO_DEBUGGER and options ALT_BREAK_TO_DEBUGGER continue to behave as before -- only now instead of compiling in break-to-debugger support, they change the default values of the above sysctls to enable those features by default. Current kernel configurations should, therefore, continue to behave as expected. (4) Migrate alternative break-to-debugger state machine logic out of individual device drivers into centralised KDB code. This has a number of upsides, but also one downside: it's now tricky to release sio spin locks when entering the debugger, so we don't. However, similar logic does not exist in other device drivers, including uart. (5) dcons requires some special handling; unlike other console types, it allows overriding KDB's own debugger selection, so we need a new interface to KDB to allow that to work. GENERIC kernels in -CURRENT will now support break-to-debugger as long as appropriate boot/run-time options are set, which should improve the debuggability of BETA kernels significantly. MFC after: 3 weeks Reviewed by: kib, nwhitehorn Approved by: re (bz)
2011-08-26 21:46:36 +00:00
kdb_break();
This is syscons version 1.1
1993-10-28 05:27:36 +00:00
#endif
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
break;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Add "panic key" function to syscons. When this key is defined in a keymap and pressed, the system panic will be forced. This feature must be specifically enabled by a new sysctl variable: machdep.enable_panic_key. Its default value is 0. The panic key won't do anything unless this variable is set to non-zero. To use the panic key, add a keyword 'panic' to a key in your keymap file. The following example assigns the panic function to SysReq (Alt-PrintScreen) key (keycode 84). 083 del '.' '.' '.' '.' '.' boot boot N 084 panic nop nop nop panic nop nop nop O 085 nop nop nop nop nop nop nop nop O PR: kern/13721
1999-12-10 04:30:58 +00:00
case PNC:
if (enable_panic_key)
panic("Forced by the panic key");
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
case NEXT:
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
this_scr = scp->index;
for (i = (this_scr - sc->first_vty + 1)%sc->vtys;
sc->first_vty + i != this_scr;
i = (i + 1)%sc->vtys) {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
struct tty *tp = SC_DEV(sc, sc->first_vty + i);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (tty_opened_ns(tp)) {
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_switch_scr(scp->sc, sc->first_vty + i);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
break;
}
}
break;
case PREV:
this_scr = scp->index;
for (i = (this_scr - sc->first_vty + sc->vtys - 1)%sc->vtys;
sc->first_vty + i != this_scr;
i = (i + sc->vtys - 1)%sc->vtys) {
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
struct tty *tp = SC_DEV(sc, sc->first_vty + i);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (tty_opened_ns(tp)) {
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_switch_scr(scp->sc, sc->first_vty + i);
Fixed the "switch to next screen" command (normally bound to the key "print scrn". It used to stop at the first non-open vty, now it skips the non-open ones and thereby enable one to cycle around all open vty by pressing "print scrn".
1997-01-30 15:12:17 +00:00
break;
}
}
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
break;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
default:
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (KEYCHAR(c) >= F_SCR && KEYCHAR(c) <= L_SCR) {
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_switch_scr(scp->sc, sc->first_vty + KEYCHAR(c) - F_SCR);
Added accent (dead) key support to syscons and kbdcontrol. With a keymap with accent key definitions loaded to syscons, you press an accent key followed by a regular letter key to produce an accented letter. Press an accent key followed by the space bar to get the accent letter itself. Code is based on the ideas and work by jmrueda@diatel.upm.es and totii@est.is. PR: i386/4016 console.h - Defined structures and constants for accent (dead) keys. syscons.c, kbdtables.h - When an accent key is pressed, set the corresponding index to `accents'. If the next key is the space key, produce the accent char itself. Otherwise search the accent key map entry, indexed by `accents', for a matching pair of a regular char and an accented char. - Added ioctl functions to set and get the accent key map (PIO_DEADKEYMAP and GIO_DEADKEYMAP).
1998-01-07 08:40:34 +00:00
break;
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* assert(c & FKEY) */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!(sc->flags & SC_SCRN_BLANKED))
return c;
break;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
/* goto next_code */
} else {
/* regular keys (maybe MKEY is set) */
Add support for alternative break-to-debugger to syscons(4). While most keyboards allow console break sequences (such as ctrl-alt-esc) to be entered, alternative break can prove useful under virtualisation and remote console systems where entering control sequences can be difficult or unreliable. MFC after: 3 weeks Approved by: re (bz)
2011-08-27 22:10:45 +00:00
#if !defined(SC_DISABLE_KDBKEY) && defined(KDB)
if (enable_kdbkey)
kdb_alt_break(c, &sc->sc_altbrk);
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (!(sc->flags & SC_SCRN_BLANKED))
return c;
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
goto next_code;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Be consistent about "static" functions: if the function is marked static in its prototype, mark it static at the definition too. Inspired by: FlexeLint warning #512
2002-09-28 17:15:38 +00:00
static int
Update d_mmap() to accept vm_ooffset_t and vm_memattr_t. This replaces d_mmap() with the d_mmap2() implementation and also changes the type of offset to vm_ooffset_t. Purge d_mmap2(). All driver modules will need to be rebuilt since D_VERSION is also bumped. Reviewed by: jhb@ MFC after: Not in this lifetime...
2009-12-29 21:51:28 +00:00
sctty_mmap(struct tty *tp, vm_ooffset_t offset, vm_paddr_t *paddr,
int nprot, vm_memattr_t *memattr)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
scr_stat *scp;
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
scp = sc_get_stat(tp);
- Hang the scr_stat struct from dev_t. - Remove sc_get_scr_stat(). It's not necessary anymore. - Call ttymalloc() to allocate the struct tty for each vty, rather than statically declaring an array of struct tty. We still need a statically allocated struct tty for the first vty which is used for the kernel console I/O, though. - Likewise, call ttymalloc() for /dev/sysmouse and /dev/consolectl. - Delete unnecessary test on the pointer struct tty *tp in some functions. - Delete unused code in scmouse.c. WARNING: this change requires you to recompile screen savers!
1999-09-19 08:58:53 +00:00
if (scp != scp->sc->cur_scp)
return -1;
Update d_mmap() to accept vm_ooffset_t and vm_memattr_t. This replaces d_mmap() with the d_mmap2() implementation and also changes the type of offset to vm_ooffset_t. Purge d_mmap2(). All driver modules will need to be rebuilt since D_VERSION is also bumped. Reviewed by: jhb@ MFC after: Not in this lifetime...
2009-12-29 21:51:28 +00:00
return vidd_mmap(scp->sc->adp, offset, paddr, nprot, memattr);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Reload font when syscons(4) is resuming without switching mode. Reported by: adrian (more than a year ago) Prodded by: adrian (less than a month ago)
2013-07-17 23:29:56 +00:00
static void
update_font(scr_stat *scp)
{
#ifndef SC_NO_FONT_LOADING
/* load appropriate font */
if (!(scp->status & GRAPHICS_MODE)) {
if (!(scp->status & PIXEL_MODE) && ISFONTAVAIL(scp->sc->adp->va_flags)) {
if (scp->font_size < 14) {
if (scp->sc->fonts_loaded & FONT_8)
sc_load_font(scp, 0, 8, 8, scp->sc->font_8, 0, 256);
} else if (scp->font_size >= 16) {
if (scp->sc->fonts_loaded & FONT_16)
sc_load_font(scp, 0, 16, 8, scp->sc->font_16, 0, 256);
} else {
if (scp->sc->fonts_loaded & FONT_14)
sc_load_font(scp, 0, 14, 8, scp->sc->font_14, 0, 256);
}
/*
* FONT KLUDGE:
* This is an interim kludge to display correct font.
* Always use the font page #0 on the video plane 2.
* Somehow we cannot show the font in other font pages on
* some video cards... XXX
*/
sc_show_font(scp, 0);
}
mark_all(scp);
}
#endif /* !SC_NO_FONT_LOADING */
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int
save_kbd_state(scr_stat *scp)
Fix a couble of nasties regarding mouse pointer and different resolutions. Allow middle mouse button to be used for pasting. Also added the beginnings of support for a splash page.
1996-09-30 23:00:58 +00:00
{
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
int state;
int error;
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(scp->sc->kbd, KDGKBSTATE, (caddr_t)&state);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == ENOIOCTL)
error = ENODEV;
if (error == 0) {
scp->status &= ~LOCK_MASK;
scp->status |= state;
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
return error;
}
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
update_kbd_state(scr_stat *scp, int new_bits, int mask)
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
{
int state;
int error;
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (mask != LOCK_MASK) {
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(scp->sc->kbd, KDGKBSTATE, (caddr_t)&state);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == ENOIOCTL)
error = ENODEV;
if (error)
return error;
state &= ~mask;
state |= new_bits & mask;
} else {
state = new_bits & LOCK_MASK;
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
}
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(scp->sc->kbd, KDSKBSTATE, (caddr_t)&state);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == ENOIOCTL)
error = ENODEV;
return error;
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
}
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
static int
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
update_kbd_leds(scr_stat *scp, int which)
Upgrade the kbdio rutines to provide queued kbd & mouse events. Minor other updates to syscons by me. Submitted by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
{
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
int error;
Finally a start at sharing the kdb controller routines between syscons and psm, curtesy Kazutaka Yokota with minor changes by me. This contains an update of the psm driver as well. This also fixes the breakage that I introduced to the psm driver by making syscons poll for keyboard events in the atempt to fix the hanging keyboard problem. It works perfectly for me, and I'd like to hear from all that have had keyboard/ps/2 mouse problems if this is the cure... Submitted by: Kazutaka YOKOTA (yokota@zodiac.mech.utsunomiya-u.ac.jp)
1996-11-14 22:19:17 +00:00
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
which &= LOCK_MASK;
Remove explicit calls to keyboard methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind kbdd_* is a "keyboard discipline". List of macros is supposed to be complete--all methods of keyboard_switch should have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of code as is. Glanced at by: rwatson Reviewed by: emax, marcel Approved by: cognet
2007-12-29 21:55:25 +00:00
error = kbdd_ioctl(scp->sc->kbd, KDSETLED, (caddr_t)&which);
The first stage of console driver reorganization: activate new keyboard and video card drivers. Because of the changes, you are required to update your kernel configuration file now! The files in sys/dev/syscons are still i386-specific (but less so than before), and won't compile for alpha and PC98 yet. syscons still directly accesses the video card registers here and there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
if (error == ENOIOCTL)
error = ENODEV;
return error;
Fix a couble of nasties regarding mouse pointer and different resolutions. Allow middle mouse button to be used for pasting. Also added the beginnings of support for a splash page.
1996-09-30 23:00:58 +00:00
}
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
int
Updated to latest 1.1.5.1+ version Reviewed by: Submitted by:
1994-08-17 08:51:59 +00:00
set_mode(scr_stat *scp)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
video_info_t info;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
/* reject unsupported mode */
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
if (vidd_get_info(scp->sc->adp, scp->mode, &info))
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
return 1;
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
/* if this vty is not currently showing, do nothing */
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp != scp->sc->cur_scp)
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
return 0;
Make comp_vgaregs() less strict about VGA register values when checking the BIOS video mode paramter table. Now syscons uses the parameter table even if some bits in the table are different from the current VGA register settings. Even if comp_vgaregs() finds that the BIOS video parameter table looks totally unfamiliar to it, syscons allows the user to change the current video mode to some modes which are based on the VGA 80x25 mode. They are VGA 80x30, VGA 80x50, VGA 80x60. In this case the user will be warned, during boot, that video mode switching is only paritally supported on his machine. PR: bin/4477
1997-11-21 11:37:07 +00:00
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
/* setup video hardware for the given mode */
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_set_mode(scp->sc->adp, scp->mode);
Add VESA mode support for syscons, which enables the support of 15, 16, 24, and 32 bit modes. To use that, syscons(4) must be built with the compile time option 'options SC_PIXEL_MODE', and VESA support (a.k.a. vesa.ko) must be either loaded, or be compiled into the kernel. Do not return EINVAL when the mouse state is changed to what it already is, which seems to cause problems when you have two mice attached, and applications are not likely obtain useful information through the EINVAL caused by showing the mouse pointer twice. Teach vidcontrol(8) about mode names like MODE_<NUMBER>, where <NUMBER> is the video mode number from the vidcontrol -i mode output. Also, revert the video mode if something fails. Obtained from: DragonFlyBSD Discussed at: current@ with patch attached [1] PR: kern/71142 [2] Submitted by: Xuefeng DENG <dsnofe at msn com> [1], Cyrille Lefevre <cyrille dot lefevre at laposte dot net> [2]
2005-05-29 08:43:44 +00:00
scp->rndr->init(scp);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#ifndef __sparc64__
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_vtb_init(&scp->scr, VTB_FRAMEBUFFER, scp->xsize, scp->ysize,
(void *)scp->sc->adp->va_window, FALSE);
Add sparc64 ifdefs.
2003-08-24 00:44:00 +00:00
#endif
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
Reload font when syscons(4) is resuming without switching mode. Reported by: adrian (more than a year ago) Prodded by: adrian (less than a month ago)
2013-07-17 23:29:56 +00:00
update_font(scp);
syscons - Bring down the splash screen when a vty is opened for the first time. - Make sure the splash screen/screen saver is stopped before switching vtys. - Read and save initial values in the BIOS data area early. VESA BIOS may change BIOS data values when switching modes. - Fix missing '&' operator. - Move ISA specific part of driver initialization to syscons_isa.c. atkbd - kbdtables.h is now in /sys/dev/kbd. all - Adjust for forthcoming alpha port. Submitted by: dfr
1999-01-19 11:31:22 +00:00
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_set_border(scp, scp->border);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
sc_set_cursor_image(scp);
Addresses the following two problems. 1) i586_bcopy() problem There have been a number of reports that the syscons doesn't work properly if i586_bcopy() is enabled. The problem prevented users from installing 2.2(.1)-RELEASE. The symptom is that the system looks frozen during device probe or just before the main installation menu. The workaround was to specify the flag 0x01 to the npx device so that i586_bcopy() is disabled. The patch forces the syscons to call generic_bcopy() when copying to/from the video memory, even if CPU is Pentium and i586_bcopy() is enabled. i586_bcopy() is still called for copy operations between non-video memory regions. PR: kern/2277, kern/3066, kern/3107, kern/3134 2) video mode parameter table problem The syscons reads and uses the video mode parameter table provided by the VGA BIOS to set VGA registers when changing video mode and modifying font data. It appears that in some VGA BIOSes the table is not ordered as the syscons expects, and this leads to screen corruption. The problem prevented users from installing 2.2(.1)-RELEASE. The symptom is the corrupt screen or strange vertical lines soon after the kernel is loaded into memory (just after the kernel decompression). The patch performs simplistic test and if it fails, set video_mode_ptr to NULL so that the video mode switching won't happen. This is an interim kludge. There should be a better way to deal with the problem. PR: kern/2498, conf/2775, conf/3354 Reviewed by: sos Tested by: PR originators (not all of them, though)
1997-04-27 09:03:10 +00:00
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
return 0;
Addresses the following two problems. 1) i586_bcopy() problem There have been a number of reports that the syscons doesn't work properly if i586_bcopy() is enabled. The problem prevented users from installing 2.2(.1)-RELEASE. The symptom is that the system looks frozen during device probe or just before the main installation menu. The workaround was to specify the flag 0x01 to the npx device so that i586_bcopy() is disabled. The patch forces the syscons to call generic_bcopy() when copying to/from the video memory, even if CPU is Pentium and i586_bcopy() is enabled. i586_bcopy() is still called for copy operations between non-video memory regions. PR: kern/2277, kern/3066, kern/3107, kern/3134 2) video mode parameter table problem The syscons reads and uses the video mode parameter table provided by the VGA BIOS to set VGA registers when changing video mode and modifying font data. It appears that in some VGA BIOSes the table is not ordered as the syscons expects, and this leads to screen corruption. The problem prevented users from installing 2.2(.1)-RELEASE. The symptom is the corrupt screen or strange vertical lines soon after the kernel is loaded into memory (just after the kernel decompression). The patch performs simplistic test and if it fails, set video_mode_ptr to NULL so that the video mode switching won't happen. This is an interim kludge. There should be a better way to deal with the problem. PR: kern/2498, conf/2775, conf/3354 Reviewed by: sos Tested by: PR originators (not all of them, though)
1997-04-27 09:03:10 +00:00
}
Fix and update for VESA BIOS support in syscons. - Handle pixel (raster text) mode properly. - Clear screen and paint border right. - Paint text attribute (colors). - Fix off-by-one errors. - Add some sanity checks. - Fix some function prototypes. - Add some comment lines. - Define generic text mode numbers so that the user can just give "80x25", "80x60", "132x25"..., rather than "VGA_xxx", to `vidcontrol' to change the current video mode. `vidoio.c' and `vesa.c' will map these numbers to real video mode numbers appropriate and available with the given video hardware. I believe this will be useful to make syscons more portable across archtectures.
1998-09-23 09:59:00 +00:00
void
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_set_border(scr_stat *scp, int color)
Fix and update for VESA BIOS support in syscons. - Handle pixel (raster text) mode properly. - Clear screen and paint border right. - Paint text attribute (colors). - Fix off-by-one errors. - Add some sanity checks. - Fix some function prototypes. - Add some comment lines. - Define generic text mode numbers so that the user can just give "80x25", "80x60", "132x25"..., rather than "VGA_xxx", to `vidcontrol' to change the current video mode. `vidoio.c' and `vesa.c' will map these numbers to real video mode numbers appropriate and available with the given video hardware. I believe this will be useful to make syscons more portable across archtectures.
1998-09-23 09:59:00 +00:00
{
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_LOCK(scp->sc);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(*scp->rndr->draw_border)(scp, color);
Introduce a spinlock for synchronizing access to the video output hardware in syscons. This replaces a simple access semaphore that was assumed to be protected by Giant but often was not. If two threads that were otherwise SMP-safe called printf at the same time, there was a high likelyhood that the semaphore would get corrupted and result in a permanently frozen video console. This is similar to what is already done in the serial console drivers.
2006-09-13 15:48:15 +00:00
SC_VIDEO_UNLOCK(scp->sc);
Fix and update for VESA BIOS support in syscons. - Handle pixel (raster text) mode properly. - Clear screen and paint border right. - Paint text attribute (colors). - Fix off-by-one errors. - Add some sanity checks. - Fix some function prototypes. - Add some comment lines. - Define generic text mode numbers so that the user can just give "80x25", "80x60", "132x25"..., rather than "VGA_xxx", to `vidcontrol' to change the current video mode. `vidoio.c' and `vesa.c' will map these numbers to real video mode numbers appropriate and available with the given video hardware. I believe this will be useful to make syscons more portable across archtectures.
1998-09-23 09:59:00 +00:00
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#ifndef SC_NO_FONT_LOADING
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
void
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_load_font(scr_stat *scp, int page, int size, int width, u_char *buf,
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
int base, int count)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_softc_t *sc;
sc = scp->sc;
sc->font_loading_in_progress = TRUE;
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_load_font(sc->adp, page, size, width, buf, base, count);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc->font_loading_in_progress = FALSE;
Second round in syscons update: Support for pseudo graphic mouse cursor (not complete yet) Some cheap speed fixes. More cleanups. Call ourselves scxxxx finally.
1995-01-20 08:35:32 +00:00
}
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
void
Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t and do some preparations for handling 12x22 fonts (currently lots of code implies and/or hardcodes a font width of 8 pixels). This will be required on sparc64 which uses a default font size of 12x22 in order to add font loading and saving support as well as to use a syscons(4)-supplied mouse pointer image. This API breakage is committed now so it can be MFC'ed in time for 6.0 and later on upcoming framebuffer drivers destined for use on sparc64 and which are expected to rely on using font loading internally and on a syscons(4)-supplied mouse pointer image can be easily MFC'ed to RELENG_6 rather than requiring a backport. Tested on: i386, sparc64, make universe MFC after: 1 week
2005-09-28 14:54:07 +00:00
sc_save_font(scr_stat *scp, int page, int size, int width, u_char *buf,
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
int base, int count)
Optimized the way physical screen updates are done. Now only update what has actually been touched. This should speed up screen access on slow hardware. Introduced setting of "destructive" cursor size, much like the old hardware cursor.
1995-03-29 20:55:03 +00:00
{
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_softc_t *sc;
sc = scp->sc;
sc->font_loading_in_progress = TRUE;
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_save_font(sc->adp, page, size, width, buf, base, count);
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc->font_loading_in_progress = FALSE;
}
void
sc_show_font(scr_stat *scp, int page)
{
Replace explicit calls to video methods with their respective variants implemented with macros. This patch improves code readability. Reasoning behind vidd_* is a sort of "video discipline". List of macros is supposed to be complete--all methods of video_switch ought to have their respective macros from now on. Functionally, this code should be no-op. My intention is to leave current behaviour of touched code as is. No objections: rwatson Silence on: freebsd-current@ Approved by: cognet
2007-12-29 23:26:59 +00:00
vidd_show_font(scp->sc->adp, page);
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
}
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
#endif /* !SC_NO_FONT_LOADING */
Add VESA support to syscons. Kazu writes: The VESA support code requires vm86 support. Make sure your kernel configuration file has the following line. options "VM86" If you want to statically link the VESA support code to the kernel, add the following option to the kernel configuration file. options "VESA" The vidcontrol command now accepts the following video mode names: VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600 The VESA_800x600 mode is a raster display mode. The 80x25 text will be displayed on the 800x600 screen. Useful for some laptop computers. vidcontrol accepts the new `-i <info>' option, where <info> must be either `adapter' or `mode'. When the `-i adapter' option is given, vidcontrol will print basic information (not much) on the video adapter. When the `-i mode' option is specified, vidcontrol will list video modes which are actually supported by the video adapter. Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
void
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
sc_paste(scr_stat *scp, const u_char *p, int count)
- Add support for the following mice to psm/moused/sysmouse: MS IntelliMouse, Kensington Thinking Mouse, Genius NetScroll, Genius NetMouse, Genius NetMouse Pro, ALPS GlidePoint, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ - The `psm' driver is made to recognize various models of PS/2 mice and enable their extra features so that their additional buttons and wheel/roller are recognized. The name of the detected model will be printed at boot time. - A set of new ioctl functions are added to the `psm', `mse' and `sysmouse' drivers so that the userland program (such as the X server) can query device information and change driver settings. - The wheel/roller movement is handled as the `Z' axis movement by the mouse drivers and the moused daemon. The Z axis movement may be mapped to another axis movement or buttons. - The mouse drivers support a new, standard mouse data format, MOUSE_PROTO_SYSMOUSE format which can encode x, y, and x axis movement and up to 10 buttons. /sys/i386/include/mouse.h - Added some fields to `mousestatus_t' to store Z axis movement and flag bits. - Added the field `model' to `mousehw_t' to store mouse model code. Defined model codes. - Extended `mousemode_t'. - Added new protocols and some constants for them. - Added new ioctl functions and structures. - Removed obsolete ioctl definitions. /sys/i386/include/console.h - Added `dz' field to the structure `mouse_data' to pass Z axis movement to `syscons/sysmouse'. - Removed LEFT_BUTTON, MIDDLE_BUTTON and RIGHT_BUTTON. Use button bits defined in `mouse.h' instead. /sys/i386/isa/psm.c - Added a set of functions to detect various mice which have additional features (wheel and buttons) unavailable in the standard PS/2 mouse. - Refined existing ioctl functions and added new ones. Most important of all is MOUSE_SETLEVEL which manipulates the output level of the driver. While the output level remains zero, the output from the `psm' driver is in the standard PS/2 mouse format (three bytes long). When the level is set to one, the `psm' driver will send data in the extended format. At the level two the driver uses the format which is native to the connected mouse is used. (Meaning that the output from the device is passed to the caller as is, unmodified.) The `psm' driver will pass such extended data format as is to the caller if the output level is two, but emulates the standard format if the output level is zero. - Added kernel configuration flags to set initial resolution (PSM_CONFIG_RESOLUTION) and acceleration (PSM_CONFIG_ACCEL). - Removed the compile options PSM_ACCEL, PSM_CHECKSYNC and PSM_EMULATION. Acceleration ratio is now specified by the kernel configuration flags stated above. Sync check logic is refined and now standard. The sync check can be turned off by the new kernel configuration flags PSM_CONFIG_NOCHECKSYNC (0x100). PSM_EMULATION has been of little use. - Summer clean up :-) Removed unused code and obsolete comments. /sys/i386/isa/mse.c - Created mseioctl() to deal with ioctl functions MOUSE_XXXX. Most importantly, the MOUSE_SETLEVEL ioctl will change the output format from the 5 byte format to the new, extended format so that the caller can take advantage of Z axis movement and additional buttons. - Use constants defined in `mouse.h' rather than magic numbers. /sys/i386/isa/syscons.c - Changed scioctl() to reflect the new `console.h' and some of the new ioctls defined in `mouse.h'. Most importantly, the MOUSE_SETLEVEL ioctl will change the `sysmouse' output format from the MouseSystems 5 byte format to the new, extended format so that the caller can take advantage of Z axis movement and additional buttons. - Added support for double/triple click actions of the left button and single click action of the right button in the virtual console. The left button double click will select a word under the mouse pointer. The triple click will select a line and the single click of the right button will extend the selected region to the current position of the mouse pointer. This will make the cut/paste support more compatible with xterm. /sys/i386/isa/kbdio.h - Added PSM_INTELLI_ID.
1997-12-07 08:09:19 +00:00
{
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
struct tty *tp;
u_char *rmap;
- Add support for the following mice to psm/moused/sysmouse: MS IntelliMouse, Kensington Thinking Mouse, Genius NetScroll, Genius NetMouse, Genius NetMouse Pro, ALPS GlidePoint, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ - The `psm' driver is made to recognize various models of PS/2 mice and enable their extra features so that their additional buttons and wheel/roller are recognized. The name of the detected model will be printed at boot time. - A set of new ioctl functions are added to the `psm', `mse' and `sysmouse' drivers so that the userland program (such as the X server) can query device information and change driver settings. - The wheel/roller movement is handled as the `Z' axis movement by the mouse drivers and the moused daemon. The Z axis movement may be mapped to another axis movement or buttons. - The mouse drivers support a new, standard mouse data format, MOUSE_PROTO_SYSMOUSE format which can encode x, y, and x axis movement and up to 10 buttons. /sys/i386/include/mouse.h - Added some fields to `mousestatus_t' to store Z axis movement and flag bits. - Added the field `model' to `mousehw_t' to store mouse model code. Defined model codes. - Extended `mousemode_t'. - Added new protocols and some constants for them. - Added new ioctl functions and structures. - Removed obsolete ioctl definitions. /sys/i386/include/console.h - Added `dz' field to the structure `mouse_data' to pass Z axis movement to `syscons/sysmouse'. - Removed LEFT_BUTTON, MIDDLE_BUTTON and RIGHT_BUTTON. Use button bits defined in `mouse.h' instead. /sys/i386/isa/psm.c - Added a set of functions to detect various mice which have additional features (wheel and buttons) unavailable in the standard PS/2 mouse. - Refined existing ioctl functions and added new ones. Most important of all is MOUSE_SETLEVEL which manipulates the output level of the driver. While the output level remains zero, the output from the `psm' driver is in the standard PS/2 mouse format (three bytes long). When the level is set to one, the `psm' driver will send data in the extended format. At the level two the driver uses the format which is native to the connected mouse is used. (Meaning that the output from the device is passed to the caller as is, unmodified.) The `psm' driver will pass such extended data format as is to the caller if the output level is two, but emulates the standard format if the output level is zero. - Added kernel configuration flags to set initial resolution (PSM_CONFIG_RESOLUTION) and acceleration (PSM_CONFIG_ACCEL). - Removed the compile options PSM_ACCEL, PSM_CHECKSYNC and PSM_EMULATION. Acceleration ratio is now specified by the kernel configuration flags stated above. Sync check logic is refined and now standard. The sync check can be turned off by the new kernel configuration flags PSM_CONFIG_NOCHECKSYNC (0x100). PSM_EMULATION has been of little use. - Summer clean up :-) Removed unused code and obsolete comments. /sys/i386/isa/mse.c - Created mseioctl() to deal with ioctl functions MOUSE_XXXX. Most importantly, the MOUSE_SETLEVEL ioctl will change the output format from the 5 byte format to the new, extended format so that the caller can take advantage of Z axis movement and additional buttons. - Use constants defined in `mouse.h' rather than magic numbers. /sys/i386/isa/syscons.c - Changed scioctl() to reflect the new `console.h' and some of the new ioctls defined in `mouse.h'. Most importantly, the MOUSE_SETLEVEL ioctl will change the `sysmouse' output format from the MouseSystems 5 byte format to the new, extended format so that the caller can take advantage of Z axis movement and additional buttons. - Added support for double/triple click actions of the left button and single click action of the right button in the virtual console. The left button double click will select a word under the mouse pointer. The triple click will select a line and the single click of the right button will extend the selected region to the current position of the mouse pointer. This will make the cut/paste support more compatible with xterm. /sys/i386/isa/kbdio.h - Added PSM_INTELLI_ID.
1997-12-07 08:09:19 +00:00
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tp = SC_DEV(scp->sc, scp->sc->cur_scp->index);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (!tty_opened_ns(tp))
Don't require that mouse cursor must be visible before mouse paste. Paste always happens to current _text_ cursor position independently of mouse cursor position in any case and old variant force user to press mouse paste button _two_ times if mouse cursor is invisible.
2001-03-12 01:15:11 +00:00
return;
rmap = scp->sc->scr_rmap;
for (; count > 0; --count)
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
ttydisc_rint(tp, rmap[*p++], 0);
ttydisc_rint_done(tp);
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
void
Add support for VT200-style mouse input. Right now if applications want to use the mouse on the command line, they use sysmouse(4) and install a signal handler in the kernel to deliver signals when mouse events arrive. This conflicts with my plan to change to TERM=xterm, so implement proper VT200-style mouse input. Because mouse input is now streamed through the TTY, it means you can now SSH to another system on the console and use the mouse there as well. The disadvantage of the VT200 mouse protocol, is that it doesn't seem to generate events when moving the cursor. Only when pressing and releasing mouse buttons. There are different protocols as well, but this one seems to be most commonly supported. Reported by: Paul B. Mahol <onemda gmail com> Tested with: vim(1)
2009-09-27 18:19:41 +00:00
sc_respond(scr_stat *scp, const u_char *p, int count, int wakeup)
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
{
struct tty *tp;
tp = SC_DEV(scp->sc, scp->sc->cur_scp->index);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (!tty_opened_ns(tp))
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
return;
Add support for VT200-style mouse input. Right now if applications want to use the mouse on the command line, they use sysmouse(4) and install a signal handler in the kernel to deliver signals when mouse events arrive. This conflicts with my plan to change to TERM=xterm, so implement proper VT200-style mouse input. Because mouse input is now streamed through the TTY, it means you can now SSH to another system on the console and use the mouse there as well. The disadvantage of the VT200 mouse protocol, is that it doesn't seem to generate events when moving the cursor. Only when pressing and releasing mouse buttons. There are different protocols as well, but this one seems to be most commonly supported. Reported by: Paul B. Mahol <onemda gmail com> Tested with: vim(1)
2009-09-27 18:19:41 +00:00
ttydisc_rint_simple(tp, p, count);
if (wakeup) {
/* XXX: we can't always call ttydisc_rint_done() here! */
ttydisc_rint_done(tp);
}
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
}
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
void
sc_bell(scr_stat *scp, int pitch, int duration)
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
{
Add a "hw.syscons.bell" sysctl, which can disable the bell at syscons level.
2003-02-20 03:27:09 +00:00
if (cold || shutdown_in_progress || !enable_bell)
- Ignore KBD_RAW_MODE and KBD_CODE_MODE in scgetc() when it's called from the low-level console routines sccngetc() and sccncheckc(). Submitted by: bde (a long time ago) - Don't try to ring bell and immediately return from do_bell() while device probe is in progress at boot time; the timeout queue is not functional yet. PR: kern/2424 - Stop running the screen saver after panic() is called: check if `panicstr' is non-NULL during scrn_timer(). PR: kern/5314 - A new option: SC_DISABLE_REBOOT The reboot key (usually Ctl-Alt-Del) will be ignored if this option is defined. You may still have the reboot key defined in the keymap and it won't cause error when the keymap is loaded, but it will be quietly treated as nop. OKed by: sos
1998-02-11 14:56:02 +00:00
return;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp != scp->sc->cur_scp && (scp->sc->flags & SC_QUIET_BELL))
- Add new bell types: "quiet.normal" and "quiet.visual". When bell is of "quiet" types, the console won't ring (or flush) if the ringing process is in a background vty. PR: i386/2853 - Modify the escape sequence 'ESC[=%d;%dB' so that bell pitch and duration are set in hertz and msecs by kbdcontrol(1). There will be a corresponding kbdcontrol patch. PR: bin/6037 Submitted by: Kouichi Hirabayashi (kh@eve.mogami-wire.co.jp)
1998-08-03 09:09:35 +00:00
return;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->sc->flags & SC_VISUAL_BELL) {
if (scp->sc->blink_in_progress)
Deliver all bells to current console, use different pitch for non-originating bells.
1996-02-05 14:08:39 +00:00
return;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
scp->sc->blink_in_progress = 3;
if (scp != scp->sc->cur_scp)
scp->sc->blink_in_progress += 2;
blink_screen(scp->sc->cur_scp);
Don't call sysbeep() in sc_bell() if either duration or pitch is zero. Otherwise sysbeep() makes an annoying clicking sound on some systems. 'kbdcontrol -b off' just sets the duration and pitch to zero, it doesn't set the QUIET_BELL flag. Tested by: SorAlx <soralx@cydem.zp.ua> PR: misc/41772 MFC after: 1 week
2003-03-24 15:56:00 +00:00
} else if (duration != 0 && pitch != 0) {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp != scp->sc->cur_scp)
Deliver all bells to current console, use different pitch for non-originating bells.
1996-02-05 14:08:39 +00:00
pitch *= 2;
The "free-lance" timer in the i8254 is only used for the speaker these days, so de-generalize the acquire_timer/release_timer api to just deal with speakers. The new (optional) MD functions are: timer_spkr_acquire() timer_spkr_release() and timer_spkr_setfreq() the last of which configures the timer to generate a tone of a given frequency, in Hz instead of 1/1193182th of seconds. Drop entirely timer2 on pc98, it is not used anywhere at all. Move sysbeep() to kern/tty_cons.c and use the timer_spkr*() if they exist, and do nothing otherwise. Remove prototypes and empty acquire-/release-timer() and sysbeep() functions from the non-beeping archs. This eliminate the need for the speaker driver to know about i8254frequency at all. In theory this makes the speaker driver MI, contingent on the timer_spkr_*() functions existing but the driver does not know this yet and still attaches to the ISA bus. Syscons is more tricky, in one function, sc_tone(), it knows the hz and things are just fine. In the other function, sc_bell() it seems to get the period from the KDMKTONE ioctl in terms if 1/1193182th second, so we hardcode the 1193182 and leave it at that. It's probably not important. Change a few other sysbeep() uses which obviously knew that the argument was in terms of i8254 frequency, and leave alone those that look like people thought sysbeep() took frequency in hertz. This eliminates the knowledge of i8254_freq from all but the actual clock.c code and the prof_machdep.c on amd64 and i386, where I think it would be smart to ask for help from the timecounters anyway [TBD].
2008-03-26 20:09:21 +00:00
sysbeep(1193182 / pitch, duration);
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
First round in syscons update. Several new features has been added: No kernel config options anymore besides keyboard language layout. Virtual consoles are now dynamically allocated, no NCONS anymore. Software cursor blinking/nonblinking. Visual bell for laptops (don't beep at meetings :-). Cursor/bell default type setable via config "flags" instead of as defines. Cursor/bell type setable via ioctl's. New video modes 80x30 80x60 for some laptops, and those with multisync monitors. Scroll-lock history (length currently fixed at 100 lines). Lots of cleanups, some only commented out for now (will goaway soon). Support for new features in vidcontrol/kbdcontrol. Updated manpages.
1995-01-12 11:47:05 +00:00
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
First round in syscons update. Several new features has been added: No kernel config options anymore besides keyboard language layout. Virtual consoles are now dynamically allocated, no NCONS anymore. Software cursor blinking/nonblinking. Visual bell for laptops (don't beep at meetings :-). Cursor/bell default type setable via config "flags" instead of as defines. Cursor/bell type setable via ioctl's. New video modes 80x30 80x60 for some laptops, and those with multisync monitors. Scroll-lock history (length currently fixed at 100 lines). Lots of cleanups, some only commented out for now (will goaway soon). Support for new features in vidcontrol/kbdcontrol. Updated manpages.
1995-01-12 11:47:05 +00:00
static void
Fixed the type of timeout functions and removed casts that hid the type mismatches. Not taking an arg in scrn_timer() broke `cc -mrtd'.
1997-04-20 16:05:33 +00:00
blink_screen(void *arg)
First round in syscons update. Several new features has been added: No kernel config options anymore besides keyboard language layout. Virtual consoles are now dynamically allocated, no NCONS anymore. Software cursor blinking/nonblinking. Visual bell for laptops (don't beep at meetings :-). Cursor/bell default type setable via config "flags" instead of as defines. Cursor/bell type setable via ioctl's. New video modes 80x30 80x60 for some laptops, and those with multisync monitors. Scroll-lock history (length currently fixed at 100 lines). Lots of cleanups, some only commented out for now (will goaway soon). Support for new features in vidcontrol/kbdcontrol. Updated manpages.
1995-01-12 11:47:05 +00:00
{
Fixed the type of timeout functions and removed casts that hid the type mismatches. Not taking an arg in scrn_timer() broke `cc -mrtd'.
1997-04-20 16:05:33 +00:00
scr_stat *scp = arg;
- Clear relevant variables when the keyboard is not available. - Do not touch the `tty' struct when it's not yet available. - Initialize correct bits in `fonts_loaded'.
1999-07-18 06:16:53 +00:00
struct tty *tp;
Fixed the type of timeout functions and removed casts that hid the type mismatches. Not taking an arg in scrn_timer() broke `cc -mrtd'.
1997-04-20 16:05:33 +00:00
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (ISGRAPHSC(scp) || (scp->sc->blink_in_progress <= 1)) {
scp->sc->blink_in_progress = 0;
1) font loading (two fixes) When an ioctl command SW_XXXX is issued, scioctl() checks if the font appropriate for the specified mode is already loaded. The check was correctly done for 8 line and 16 line fonts, but not for 14 line font. The symbols FONT_8, FONT_14 and FONT_16 were defined as numbers but were sometimes treated as bit flags. They are now defined as bit flags. 2) screen blinking (two fixes) Removed a redundant call to timeout() in do_bell(). Don't let blink_screen() write to the video buffer if the screen is in the graphics (UNKNOWN) mode. 3) screen saver timeout The ioctl command CONS_BLANKTIME sets the screen saver's timeout. The value of zero will disable the screen saver. If the screen saver is currently running it should be stopped. 4) border color and destructive cursor (two fixes) The border color and the cursor type can be changed via escape sequences. But only VGA can change the border color and set the cursor type to destructive (CHAR_CURSOR) in the current syscons. scan_esc() failed to check this. Reviewed by: sos
1997-05-15 05:43:59 +00:00
mark_all(scp);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
tp = SC_DEV(scp->sc, scp->index);
Fix for NULL-pointer panic during boot, if keys are pressed too early. MFC after: 1 week
2012-03-29 14:53:14 +00:00
if (tty_opened_ns(tp))
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
sctty_outwakeup(tp);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (scp->sc->delayed_next_scr)
This is the 3rd stage of syscons code reorganization. - Split terminal emulation code from the main part of the driver so that we can have alternative terminal emulator modules if we like in the future. (We are not quite there yet, though.) - Put sysmouse related code in a separate file, thus, simplifying the main part of the driver. As some files are added to the source tree, you need to run config(8) before you compile a new kernel next time. You shouldn't see any functional change by this commit; this is only internal code reorganization.
2000-01-15 15:25:43 +00:00
sc_switch_scr(scp->sc, scp->sc->delayed_next_scr - 1);
1) font loading (two fixes) When an ioctl command SW_XXXX is issued, scioctl() checks if the font appropriate for the specified mode is already loaded. The check was correctly done for 8 line and 16 line fonts, but not for 14 line font. The symbols FONT_8, FONT_14 and FONT_16 were defined as numbers but were sometimes treated as bit flags. They are now defined as bit flags. 2) screen blinking (two fixes) Removed a redundant call to timeout() in do_bell(). Don't let blink_screen() write to the video buffer if the screen is in the graphics (UNKNOWN) mode. 3) screen saver timeout The ioctl command CONS_BLANKTIME sets the screen saver's timeout. The value of zero will disable the screen saver. If the screen saver is currently running it should be stopped. 4) border color and destructive cursor (two fixes) The border color and the cursor type can be changed via escape sequences. But only VGA can change the border color and set the cursor type to destructive (CHAR_CURSOR) in the current syscons. scan_esc() failed to check this. Reviewed by: sos
1997-05-15 05:43:59 +00:00
}
else {
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
(*scp->rndr->draw)(scp, 0, scp->xsize*scp->ysize,
scp->sc->blink_in_progress & 1);
scp->sc->blink_in_progress--;
MFcalloutng (r244249, r244306 by mav): - Switch syscons from timeout() to callout_reset_flags() and specify that precision is not important there -- anything from 20 to 30Hz will be fine. - Reduce syscons "refresh" rate to 1-2Hz when console is in graphics mode and there is nothing to do except some polling for keyboard. Text mode refresh would also be nice to have adaptive, but this change at least should help laptop users who running X. Sponsored by: Google Summer of Code 2012, iXsystems inc. Tested by: flo, marius, ian, markj, Fabian Keil
2013-03-04 14:00:58 +00:00
callout_reset_sbt(&scp->sc->cblink, SBT_1S / 15, 0,
blink_screen, scp, C_PREL(0));
Next syscons update (given up on numbering :) Removed screensavers from syscons, they are now LKM's. This makes it possible to do some really "interesting" screensavers... Fixed bug that sometimes caused garbage to appear when leaving "scroll-lock" history. Reformattet indentation, it got too deep for a normal 80 pos screen. Split up in syscons.c & syscons.h for use with the saver-lkm's. Temporarily removed -s option from vidcontrol, savers should now be loaded with modload.
1995-02-22 13:48:07 +00:00
}
Added necessary files for syscons (may move font include later, but for now it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
}
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
/*
* Until sc_attach_unit() gets called no dev structures will be available
* to store the per-screen current status. This is the case when the
* kernel is initially booting and needs access to its console. During
* this early phase of booting the console's current status is kept in
* one statically defined scr_stat structure, and any pointers to the
* dev structures will be NULL.
*/
static scr_stat *
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
sc_get_stat(struct tty *tp)
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
{
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
if (tp == NULL)
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
return (&main_console);
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
return (SC_STAT(tp));
Rearrangements needed for syscons(4) to be used as a console device on architectures that need to call cninit() before the machine is ready to support mutexes (required by make_dev()). - Remove make_dev() call from scinit() when flags indicate unit is the system console, rely on sc_attach_unit() to handle it. - When trying to access current screen's status (scr_stat structure) use the static one provided for the initial system console if no dev_t is available. - When calling make_dev() in sc_attach_unit() catch special case of system's initial console and set up dev_t structure to include pointer to console's scr_stat struct. Reviewed by: marcel Tested by: marcel, grehan (ppc), others on current@ Approved by: rwatson (mentor)
2004-04-02 15:02:44 +00:00
}
Integrate kbdmux(4) into syscons(4) and kbd code. By default syscons(4) will look for the kbdmux(4) keyboard first, and then, if not found, look for any keyboard. Current kbd code is modified so if kbdmux(4) is the current keyboard, all new keyboards are automatically added to the kbdmux(4). Switch to kbdmux(4) can be done at boot time, by loading kbdmux module at the loader prompt, or at runtime, by kldload'ing the kbdmux module and releasing current active keyboard. If, for whatever reason, kbdmux(4) is not required/desired then just do not load it and everything should work as before. It is also possible to kldunload kbdmux at runtime and syscons(4) will automatically switch to the first available keyboard. No response from: freebsd-current@ MFC after: 1 day
2006-02-28 23:46:23 +00:00
/*
* Allocate active keyboard. Try to allocate "kbdmux" keyboard first, and,
* if found, add all non-busy keyboards to "kbdmux". Otherwise look for
* any keyboard.
*/
static int
sc_allocate_keyboard(sc_softc_t *sc, int unit)
{
int idx0, idx;
keyboard_t *k0, *k;
keyboard_info_t ki;
idx0 = kbd_allocate("kbdmux", -1, (void *)&sc->keyboard, sckbdevent, sc);
if (idx0 != -1) {
k0 = kbd_get_keyboard(idx0);
for (idx = kbd_find_keyboard2("*", -1, 0);
idx != -1;
idx = kbd_find_keyboard2("*", -1, idx + 1)) {
k = kbd_get_keyboard(idx);
if (idx == idx0 || KBD_IS_BUSY(k))
continue;
bzero(&ki, sizeof(ki));
strcpy(ki.kb_name, k->kb_name);
ki.kb_unit = k->kb_unit;
Explicitly tell the compiler that we don't care about the return value of kbdd_ioctl().
2010-10-13 11:37:12 +00:00
(void)kbdd_ioctl(k0, KBADDKBD, (caddr_t) &ki);
Integrate kbdmux(4) into syscons(4) and kbd code. By default syscons(4) will look for the kbdmux(4) keyboard first, and then, if not found, look for any keyboard. Current kbd code is modified so if kbdmux(4) is the current keyboard, all new keyboards are automatically added to the kbdmux(4). Switch to kbdmux(4) can be done at boot time, by loading kbdmux module at the loader prompt, or at runtime, by kldload'ing the kbdmux module and releasing current active keyboard. If, for whatever reason, kbdmux(4) is not required/desired then just do not load it and everything should work as before. It is also possible to kldunload kbdmux at runtime and syscons(4) will automatically switch to the first available keyboard. No response from: freebsd-current@ MFC after: 1 day
2006-02-28 23:46:23 +00:00
}
} else
idx0 = kbd_allocate("*", unit, (void *)&sc->keyboard, sckbdevent, sc);
return (idx0);
}
Reference in New Issue Copy Permalink