freebsd-skq/contrib/tcpdump/configure.in

1053 lines
26 KiB
Plaintext
Raw Normal View History

Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
dnl @(#) $Header: /tcpdump/master/tcpdump/configure.in,v 1.204 2008-11-18 07:39:20 guy Exp $ (LBL)
dnl
1998-09-15 19:36:32 +00:00
dnl Copyright (c) 1994, 1995, 1996, 1997
dnl The Regents of the University of California. All rights reserved.
dnl
dnl Process this file with autoconf to produce a configure script.
dnl
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#
# See
#
# http://ftp.gnu.org/gnu/config/README
#
# for the URLs to use to fetch new versions of config.guess and
# config.sub.
#
AC_REVISION($Revision: 1.204 $)
AC_PREREQ(2.50)
AC_INIT(tcpdump.c)
AC_CANONICAL_HOST
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
AC_LBL_C_INIT_BEFORE_CC(V_CCOPT, V_INCLS)
AC_PROG_CC
AC_LBL_C_INIT(V_CCOPT, V_INCLS)
AC_LBL_C_INLINE
AC_C___ATTRIBUTE__
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if test "$ac_cv___attribute__" = "yes"; then
AC_C___ATTRIBUTE___FORMAT_FUNCTION_POINTER
fi
2012-05-14 08:01:48 +00:00
AC_CHECK_HEADERS(fcntl.h rpc/rpc.h rpc/rpcent.h netdnet/dnetdb.h)
2007-10-16 02:20:42 +00:00
AC_CHECK_HEADERS(net/pfvar.h, , , [#include <sys/types.h>
#include <sys/socket.h>
#include <net/if.h>])
2009-03-21 16:23:46 +00:00
if test "$ac_cv_header_net_pfvar_h" = yes; then
2007-10-16 02:20:42 +00:00
LOCALSRC="print-pflog.c $LOCALSRC"
fi
AC_CHECK_HEADERS(netinet/if_ether.h, , , [#include <sys/types.h>
#include <sys/socket.h>])
if test "$ac_cv_header_netinet_if_ether_h" != yes; then
#
# The simple test didn't work.
# Do we need to include <net/if.h> first?
# Unset ac_cv_header_netinet_if_ether_h so we don't
# treat the previous failure as a cached value and
# suppress the next test.
#
AC_MSG_NOTICE([Rechecking with some additional includes])
unset ac_cv_header_netinet_if_ether_h
AC_CHECK_HEADERS(netinet/if_ether.h, , , [#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
struct mbuf;
struct rtentry;
#include <net/if.h>])
fi
AC_HEADER_TIME
case "$host_os" in
1998-09-15 19:36:32 +00:00
2012-05-14 08:01:48 +00:00
darwin*)
AC_ARG_ENABLE(universal,
AC_HELP_STRING([--disable-universal],[don't build universal on OS X]))
if test "$enable_universal" != "no"; then
case "$host_os" in
darwin9.*)
#
# Leopard. Build for x86 and 32-bit PowerPC, with
# x86 first. (That's what Apple does.)
#
V_CCOPT="$V_CCOPT -arch i386 -arch ppc"
LDFLAGS="$LDFLAGS -arch i386 -arch ppc"
;;
darwin10.*)
#
# Snow Leopard. Build for x86-64 and x86, with
# x86-64 first. (That's what Apple does.)
#
V_CCOPT="$V_CCOPT -arch x86_64 -arch i386"
LDFLAGS="$LDFLAGS -arch x86_64 -arch i386"
;;
esac
fi
;;
1998-09-15 19:36:32 +00:00
linux*)
AC_MSG_CHECKING(Linux kernel version)
if test "$cross_compiling" = yes; then
AC_CACHE_VAL(ac_cv_linux_vers,
ac_cv_linux_vers=unknown)
else
AC_CACHE_VAL(ac_cv_linux_vers,
ac_cv_linux_vers=`uname -r 2>&1 | \
sed -n -e '$s/.* //' -e '$s/\..*//p'`)
fi
1998-09-15 19:36:32 +00:00
AC_MSG_RESULT($ac_cv_linux_vers)
if test $ac_cv_linux_vers = unknown ; then
AC_MSG_ERROR(cannot determine linux version when cross-compiling)
fi
1998-09-15 19:36:32 +00:00
if test $ac_cv_linux_vers -lt 2 ; then
AC_MSG_ERROR(version 2 or higher required; see the INSTALL doc for more info)
fi
;;
*)
;;
esac
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
AC_ARG_WITH(smi,
[ --with-smi link with libsmi (allows to load MIBs on the fly to decode SNMP packets. [default=yes]
--without-smi don't link with libsmi],,
with_smi=yes)
if test "x$with_smi" != "xno" ; then
AC_CHECK_HEADERS(smi.h)
AC_CHECK_LIB(smi, smiInit)
if test "$ac_cv_header_smi_h" = yes -a "$ac_cv_lib_smi_smiInit" = yes
then
AC_MSG_CHECKING([whether to enable libsmi])
AC_TRY_RUN([ /* libsmi available check */
#include <smi.h>
main()
{
int current, revision, age, n;
const int required = 2;
if (smiInit(""))
exit(1);
if (strcmp(SMI_LIBRARY_VERSION, smi_library_version))
exit(2);
n = sscanf(smi_library_version, "%d:%d:%d", &current, &revision, &age);
if (n != 3)
exit(3);
if (required < current - age || required > current)
exit(4);
exit(0);
}
],
[ AC_MSG_RESULT(yes)
AC_DEFINE(LIBSMI)
libsmi=yes],
dnl autoconf documentation says that $? contains the exit value.
dnl reality is that it does not. We leave this in just in case
dnl autoconf ever comes back to match the documentation.
[ case $? in
1) AC_MSG_RESULT(no - smiInit failed) ;;
2) AC_MSG_RESULT(no - header/library version mismatch) ;;
3) AC_MSG_RESULT(no - can't determine library version) ;;
4) AC_MSG_RESULT(no - too old) ;;
*) AC_MSG_RESULT(no) ;;
esac
libsmi=no],
[ AC_MSG_RESULT(not when cross-compiling)
libsmi=no]
)
fi
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
fi
AC_MSG_CHECKING([whether to enable the possibly-buggy SMB printer])
AC_ARG_ENABLE(smb,
[ --enable-smb enable possibly-buggy SMB printer [default=yes]
--disable-smb disable possibly-buggy SMB printer],,
enableval=yes)
case "$enableval" in
yes) AC_MSG_RESULT(yes)
AC_WARN([The SMB printer may have exploitable buffer overflows!!!])
AC_DEFINE(TCPDUMP_DO_SMB)
LOCALSRC="print-smb.c smbutil.c $LOCALSRC"
;;
*) AC_MSG_RESULT(no)
;;
esac
AC_ARG_WITH(user, [ --with-user=USERNAME drop privileges by default to USERNAME])
AC_MSG_CHECKING([whether to drop root privileges by default])
if test ! -z "$with_user" ; then
AC_DEFINE_UNQUOTED(WITH_USER, "$withval")
AC_MSG_RESULT(to \"$withval\")
else
AC_MSG_RESULT(no)
fi
AC_ARG_WITH(chroot, [ --with-chroot=DIRECTORY when dropping privileges, chroot to DIRECTORY])
AC_MSG_CHECKING([whether to chroot])
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if test ! -z "$with_chroot" && test "$with_chroot" != "no" ; then
AC_DEFINE_UNQUOTED(WITH_CHROOT, "$withval")
AC_MSG_RESULT(to \"$withval\")
else
AC_MSG_RESULT(no)
fi
AC_MSG_CHECKING([whether to enable ipv6])
AC_ARG_ENABLE(ipv6,
[ --enable-ipv6 enable ipv6 (with ipv4) support
--disable-ipv6 disable ipv6 support],
[ case "$enableval" in
yes) AC_MSG_RESULT(yes)
2012-05-14 08:01:48 +00:00
LOCALSRC="print-ip6.c print-ip6opts.c print-mobility.c print-ripng.c print-icmp6.c print-frag6.c print-rt6.c print-ospf6.c print-dhcp6.c print-babel.c $LOCALSRC"
AC_DEFINE(INET6)
ipv6=yes
;;
*)
AC_MSG_RESULT(no)
ipv6=no
;;
esac ],
AC_TRY_RUN([ /* AF_INET6 available check */
#include <sys/types.h>
#include <sys/socket.h>
main()
{
if (socket(AF_INET6, SOCK_STREAM, 0) < 0)
exit(1);
else
exit(0);
}
],
[ AC_MSG_RESULT(yes)
2012-05-14 08:01:48 +00:00
LOCALSRC="print-ip6.c print-ip6opts.c print-mobility.c print-ripng.c print-icmp6.c print-frag6.c print-rt6.c print-ospf6.c print-dhcp6.c print-babel.c $LOCALSRC"
AC_DEFINE(INET6)
ipv6=yes],
[ AC_MSG_RESULT(no)
ipv6=no],
[ AC_MSG_RESULT(no)
ipv6=no]
))
ipv6type=unknown
ipv6lib=none
ipv6trylibc=no
if test "$ipv6" = "yes"; then
AC_MSG_CHECKING([ipv6 stack type])
for i in inria kame linux-glibc linux-libinet6 toshiba v6d zeta; do
case $i in
inria)
dnl http://www.kame.net/
AC_EGREP_CPP(yes,
[#include <netinet/in.h>
#ifdef IPV6_INRIA_VERSION
yes
#endif],
[ipv6type=$i;
CFLAGS="-DINET6 $CFLAGS"])
;;
kame)
dnl http://www.kame.net/
AC_EGREP_CPP(yes,
[#include <netinet/in.h>
#ifdef __KAME__
yes
#endif],
[ipv6type=$i;
ipv6lib=inet6;
ipv6libdir=/usr/local/v6/lib;
ipv6trylibc=yes;
CFLAGS="-DINET6 $CFLAGS"])
;;
linux-glibc)
dnl http://www.v6.linux.or.jp/
AC_EGREP_CPP(yes,
[#include <features.h>
#if defined(__GLIBC__) && __GLIBC__ >= 2 && __GLIBC_MINOR__ >= 1
yes
#endif],
[ipv6type=$i;
CFLAGS="-DINET6 $CFLAGS"])
;;
linux-libinet6)
dnl http://www.v6.linux.or.jp/
dnl
dnl This also matches Solaris 8 and Tru64 UNIX 5.1,
dnl and possibly other versions of those OSes
dnl
if test -d /usr/inet6 -o -f /usr/include/netinet/ip6.h; then
ipv6type=$i
ipv6lib=inet6
ipv6libdir=/usr/inet6/lib
ipv6trylibc=yes;
CFLAGS="-DINET6 -I/usr/inet6/include $CFLAGS"
fi
;;
toshiba)
AC_EGREP_CPP(yes,
[#include <sys/param.h>
#ifdef _TOSHIBA_INET6
yes
#endif],
[ipv6type=$i;
ipv6lib=inet6;
ipv6libdir=/usr/local/v6/lib;
CFLAGS="-DINET6 $CFLAGS"])
;;
v6d)
AC_EGREP_CPP(yes,
[#include </usr/local/v6/include/sys/v6config.h>
#ifdef __V6D__
yes
#endif],
[ipv6type=$i;
ipv6lib=v6;
ipv6libdir=/usr/local/v6/lib;
CFLAGS="-I/usr/local/v6/include $CFLAGS"])
;;
zeta)
AC_EGREP_CPP(yes,
[#include <sys/param.h>
#ifdef _ZETA_MINAMI_INET6
yes
#endif],
[ipv6type=$i;
ipv6lib=inet6;
ipv6libdir=/usr/local/v6/lib;
CFLAGS="-DINET6 $CFLAGS"])
;;
esac
if test "$ipv6type" != "unknown"; then
break
fi
done
AC_MSG_RESULT($ipv6type)
fi
if test "$ipv6" = "yes" -a "$ipv6lib" != "none"; then
if test -d $ipv6libdir -a -f $ipv6libdir/lib$ipv6lib.a; then
LIBS="-L$ipv6libdir -l$ipv6lib $LIBS"
echo "You have $ipv6lib library, using it"
else
if test "$ipv6trylibc" = "yes"; then
echo "You do not have $ipv6lib library, using libc"
else
echo 'Fatal: no $ipv6lib library found. cannot continue.'
echo "You need to fetch lib$ipv6lib.a from appropriate"
echo 'ipv6 kit and compile beforehand.'
exit 1
fi
fi
fi
if test "$ipv6" = "yes"; then
#
# XXX - on Tru64 UNIX 5.1, there is no "getaddrinfo()"
# function in libc; there are "ngetaddrinfo()" and
# "ogetaddrinfo()" functions, and <netdb.h> #defines
# "getaddrinfo" to be either "ngetaddrinfo" or
# "ogetaddrinfo", depending on whether _SOCKADDR_LEN
# or _XOPEN_SOURCE_EXTENDED are defined or not.
#
# So this test doesn't work on Tru64 5.1, and possibly
# on other 5.x releases. This causes the configure
# script to become confused, and results in libpcap
# being unbuildable.
#
AC_SEARCH_LIBS(getaddrinfo, socket, [dnl
AC_MSG_CHECKING(getaddrinfo bug)
AC_CACHE_VAL(td_cv_buggygetaddrinfo, [AC_TRY_RUN([
#include <sys/types.h>
#include <netdb.h>
#include <string.h>
#include <sys/socket.h>
#include <netinet/in.h>
main()
{
int passive, gaierr, inet4 = 0, inet6 = 0;
struct addrinfo hints, *ai, *aitop;
char straddr[INET6_ADDRSTRLEN], strport[16];
for (passive = 0; passive <= 1; passive++) {
memset(&hints, 0, sizeof(hints));
hints.ai_family = AF_UNSPEC;
hints.ai_flags = passive ? AI_PASSIVE : 0;
hints.ai_socktype = SOCK_STREAM;
hints.ai_protocol = IPPROTO_TCP;
if ((gaierr = getaddrinfo(NULL, "54321", &hints, &aitop)) != 0) {
(void)gai_strerror(gaierr);
goto bad;
}
for (ai = aitop; ai; ai = ai->ai_next) {
if (ai->ai_addr == NULL ||
ai->ai_addrlen == 0 ||
getnameinfo(ai->ai_addr, ai->ai_addrlen,
straddr, sizeof(straddr), strport, sizeof(strport),
NI_NUMERICHOST|NI_NUMERICSERV) != 0) {
goto bad;
}
switch (ai->ai_family) {
case AF_INET:
if (strcmp(strport, "54321") != 0) {
goto bad;
}
if (passive) {
if (strcmp(straddr, "0.0.0.0") != 0) {
goto bad;
}
} else {
if (strcmp(straddr, "127.0.0.1") != 0) {
goto bad;
}
}
inet4++;
break;
case AF_INET6:
if (strcmp(strport, "54321") != 0) {
goto bad;
}
if (passive) {
if (strcmp(straddr, "::") != 0) {
goto bad;
}
} else {
if (strcmp(straddr, "::1") != 0) {
goto bad;
}
}
inet6++;
break;
case AF_UNSPEC:
goto bad;
break;
#ifdef AF_UNIX
case AF_UNIX:
#else
#ifdef AF_LOCAL
case AF_LOCAL:
#endif
#endif
default:
/* another family support? */
break;
}
}
}
/* supported family should be 2, unsupported family should be 0 */
if (!(inet4 == 0 || inet4 == 2))
goto bad;
if (!(inet6 == 0 || inet6 == 2))
goto bad;
if (aitop)
freeaddrinfo(aitop);
exit(0);
bad:
if (aitop)
freeaddrinfo(aitop);
exit(1);
}
],
td_cv_buggygetaddrinfo=no,
td_cv_buggygetaddrinfo=yes,
td_cv_buggygetaddrinfo=yes)])
if test "$td_cv_buggygetaddrinfo" = no; then
AC_MSG_RESULT(good)
else
AC_MSG_RESULT(buggy)
fi
if test "$td_cv_buggygetaddrinfo" = "yes"; then
#
# XXX - it doesn't appear that "ipv6type" can ever be
# set to "linux". Should this be testing for
# "linux-glibc", or for that *or* "linux-libinet6"?
# If the latter, note that "linux-libinet6" is also
# the type given to some non-Linux OSes.
#
if test "$ipv6type" != "linux"; then
echo 'Fatal: You must get working getaddrinfo() function.'
echo ' or you can specify "--disable-ipv6"'.
exit 1
else
echo 'Warning: getaddrinfo() implementation on your system seems be buggy.'
echo ' Better upgrade your system library to newest version'
echo ' of GNU C library (aka glibc).'
fi
fi
])
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
AC_REPLACE_FUNCS(getnameinfo)
fi
AC_CACHE_CHECK([for dnet_htoa declaration in netdnet/dnetdb.h],
[td_cv_decl_netdnet_dnetdb_h_dnet_htoa],
[AC_EGREP_HEADER(dnet_htoa, netdnet/dnetdb.h,
td_cv_decl_netdnet_dnetdb_h_dnet_htoa=yes,
td_cv_decl_netdnet_dnetdb_h_dnet_htoa=no)])
if test "$td_cv_decl_netdnet_dnetdb_h_dnet_htoa" = yes; then
AC_DEFINE(HAVE_NETDNET_DNETDB_H_DNET_HTOA)
fi
dnl
dnl Checks for addrinfo structure
AC_STRUCT_ADDRINFO(ac_cv_addrinfo)
if test "$ac_cv_addrinfo" = no; then
missing_includes=yes
fi
dnl
dnl Checks for NI_MAXSERV
AC_NI_MAXSERV(ac_cv_maxserv)
if test "$ac_cv_maxserv" = no; then
missing_includes=yes
fi
dnl
dnl Checks for NI_NAMEREQD
AC_NI_NAMEREQD(ac_cv_namereqd)
if test "$ac_cv_namereqd" = no; then
missing_includes=yes
fi
dnl
dnl Checks for sockaddr_storage structure
AC_STRUCT_SA_STORAGE(ac_cv_sa_storage)
if test "$ac_cv_sa_storage" = no; then
missing_includes=yes
fi
AC_REPLACE_FUNCS(vfprintf strcasecmp strlcat strlcpy strdup strsep)
2012-05-14 08:01:48 +00:00
AC_CHECK_FUNCS(fork vfork strftime)
AC_CHECK_FUNCS(setlinebuf alarm)
needsnprintf=no
AC_CHECK_FUNCS(vsnprintf snprintf,,
[needsnprintf=yes])
if test $needsnprintf = yes; then
AC_LIBOBJ(snprintf)
fi
AC_LBL_TYPE_SIGNAL
AC_SEARCH_LIBS(dnet_htoa, dnet, AC_DEFINE(HAVE_DNET_HTOA))
AC_CHECK_LIB(rpc, main) dnl It's unclear why we might need -lrpc
dnl Some platforms may need -lnsl for getrpcbynumber.
AC_SEARCH_LIBS(getrpcbynumber, nsl, AC_DEFINE(HAVE_GETRPCBYNUMBER))
1997-05-27 02:11:31 +00:00
dnl AC_CHECK_LIB(z, uncompress)
dnl AC_CHECK_HEADERS(zlib.h)
AC_LBL_LIBPCAP(V_PCAPDEP, V_INCLS)
#
# Check for these after AC_LBL_LIBPCAP, so we link with the appropriate
# libraries (e.g., "-lsocket -lnsl" on Solaris).
#
# We don't use AC_REPLACE_FUNCS because that uses AC_CHECK_FUNCS which
# use AC_CHECK_FUNC which doesn't let us specify the right #includes
# to make this work on BSD/OS 4.x. BSD/OS 4.x ships with the BIND8
# resolver, and the way it defines inet_{ntop,pton} is rather strange;
# it does not ship with a libc symbol "inet_ntop()", it ships with
# "_inet_ntop()", and has a #define macro in one of the system headers
# to rename it.
#
dnl AC_TRY_COMPILE(inet_ntop inet_pton inet_aton)
AC_MSG_CHECKING(for inet_ntop)
AC_TRY_LINK([#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>], [char src[4], dst[128];
inet_ntop(AF_INET, src, dst, sizeof(dst));],
[AC_MSG_RESULT(yes)], [AC_MSG_RESULT(no)
AC_LIBOBJ(inet_ntop)])
AC_MSG_CHECKING(for inet_pton)
AC_TRY_LINK([#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>], [char src[128], dst[4];
inet_pton(AF_INET, src, dst);],
[AC_MSG_RESULT(yes)], [AC_MSG_RESULT(no)
AC_LIBOBJ(inet_pton)])
AC_MSG_CHECKING(for inet_aton)
AC_TRY_LINK([#include <sys/types.h>
#include <netinet/in.h>
#include <arpa/inet.h>], [char src[128];
struct in_addr dst;
inet_aton(src, &dst);],
[AC_MSG_RESULT(yes)], [AC_MSG_RESULT(no)
AC_LIBOBJ(inet_aton)])
#
# Check for these after AC_LBL_LIBPCAP, for the same reason.
#
# You are in a twisty little maze of UN*Xes, all different.
# Some might not have ether_ntohost().
# Some might have it, but not declare it in any header file.
# Some might have it, but declare it in <netinet/if_ether.h>.
# Some might have it, but declare it in <netinet/ether.h>
# (And some might have it but document it as something declared in
# <netinet/ethernet.h>, although <netinet/if_ether.h> appears to work.)
#
# Before you is a C compiler.
#
AC_CHECK_FUNCS(ether_ntohost, [
AC_CACHE_CHECK(for buggy ether_ntohost, ac_cv_buggy_ether_ntohost, [
AC_TRY_RUN([
#include <netdb.h>
#include <sys/types.h>
#include <sys/param.h>
#include <sys/socket.h>
int
main(int argc, char **argv)
{
u_char ea[6] = { 0xff, 0xff, 0xff, 0xff, 0xff };
char name[MAXHOSTNAMELEN];
ether_ntohost(name, (struct ether_addr *)ea);
exit(0);
}
], [ac_cv_buggy_ether_ntohost=no],
[ac_cv_buggy_ether_ntohost=yes],
[ac_cv_buggy_ether_ntohost="not while cross-compiling"])])
if test "$ac_cv_buggy_ether_ntohost" = "no"; then
AC_DEFINE(USE_ETHER_NTOHOST)
fi
])
if test "$ac_cv_func_ether_ntohost" = yes -a \
"$ac_cv_buggy_ether_ntohost" = "no"; then
#
# OK, we have ether_ntohost(). Do we have <netinet/if_ether.h>?
#
if test "$ac_cv_header_netinet_if_ether_h" = yes; then
#
# Yes. Does it declare ether_ntohost()?
#
AC_CHECK_DECL(ether_ntohost,
[
AC_DEFINE(NETINET_IF_ETHER_H_DECLARES_ETHER_NTOHOST,,
[Define to 1 if netinet/if_ether.h declares `ether_ntohost'])
],,
[
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
struct mbuf;
struct rtentry;
#include <net/if.h>
#include <netinet/if_ether.h>
])
fi
#
# Did that succeed?
#
if test "$ac_cv_have_decl_ether_ntohost" != yes; then
#
# No, how about <netinet/ether.h>, as on Linux?
#
AC_CHECK_HEADERS(netinet/ether.h)
if test "$ac_cv_header_netinet_ether_h" = yes; then
#
# We have it - does it declare ether_ntohost()?
# Unset ac_cv_have_decl_ether_ntohost so we don't
# treat the previous failure as a cached value and
# suppress the next test.
#
unset ac_cv_have_decl_ether_ntohost
AC_CHECK_DECL(ether_ntohost,
[
AC_DEFINE(NETINET_ETHER_H_DECLARES_ETHER_NTOHOST,,
[Define to 1 if netinet/ether.h declares `ether_ntohost'])
],,
[
#include <netinet/ether.h>
])
fi
fi
#
# Is ether_ntohost() declared?
#
if test "$ac_cv_have_decl_ether_ntohost" != yes; then
#
# No, we'll have to declare it ourselves.
# Do we have "struct ether_addr"?
#
AC_CHECK_TYPES(struct ether_addr,,,
[
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
struct mbuf;
struct rtentry;
#include <net/if.h>
#include <netinet/if_ether.h>
])
AC_DEFINE(HAVE_DECL_ETHER_NTOHOST, 0,
[Define to 1 if you have the declaration of `ether_ntohost', and to 0 if you
don't.])
else
AC_DEFINE(HAVE_DECL_ETHER_NTOHOST, 1,
[Define to 1 if you have the declaration of `ether_ntohost', and to 0 if you
don't.])
fi
fi
2009-03-21 16:23:46 +00:00
# libdlpi is needed for Solaris 11 and later.
AC_CHECK_LIB(dlpi, dlpi_walk, LIBS="$LIBS -ldlpi" LDFLAGS="-L/lib $LDFLAGS", ,-L/lib)
dnl portability macros for getaddrinfo/getnameinfo
dnl
dnl Check for sa_len
AC_CHECK_SA_LEN(ac_cv_sockaddr_has_sa_len)
if test "$ac_cv_sockaddr_has_sa_len" = no; then
missing_includes=yes
fi
2009-03-21 16:23:46 +00:00
#
# Do we have the new open API? Check for pcap_create, and assume that,
2012-05-14 08:01:48 +00:00
# if we do, we also have pcap_activate() and the other new routines
# introduced in libpcap 1.0.0.
#
2009-03-21 16:23:46 +00:00
AC_CHECK_FUNCS(pcap_create)
2012-05-14 08:01:48 +00:00
if test $ac_cv_func_pcap_create = "yes" ; then
#
# OK, do we have pcap_set_tstamp_type? If so, assume we have
# pcap_list_tstamp_types and pcap_free_tstamp_types as well.
#
AC_CHECK_FUNCS(pcap_set_tstamp_type)
fi
2009-03-21 16:23:46 +00:00
AC_CHECK_FUNCS(pcap_findalldevs pcap_dump_flush pcap_lib_version)
if test $ac_cv_func_pcap_findalldevs = "yes" ; then
dnl Check for Mac OS X, which may ship pcap.h from 0.6 but libpcap may
dnl be 0.8; this means that lib has pcap_findalldevs but header doesn't
dnl have pcap_if_t.
2012-10-04 22:40:22 +00:00
savedcppflags="$CPPFLAGS"
2009-03-21 16:23:46 +00:00
CPPFLAGS="$CPPFLAGS $V_INCLS"
AC_CHECK_TYPES(pcap_if_t, , , [#include <pcap.h>])
2009-03-21 16:23:46 +00:00
CPPFLAGS="$savedcppflags"
fi
if test $ac_cv_func_pcap_lib_version = "no" ; then
AC_MSG_CHECKING(whether pcap_version is defined by libpcap)
AC_TRY_LINK([],
[
extern char pcap_version[];
return (int)pcap_version;
],
ac_lbl_cv_pcap_version_defined=yes,
ac_lbl_cv_pcap_version_defined=no)
if test "$ac_lbl_cv_pcap_version_defined" = yes ; then
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_PCAP_VERSION)
else
AC_MSG_RESULT(no)
fi
fi
AC_MSG_CHECKING(whether pcap_debug is defined by libpcap)
AC_TRY_LINK([],
[
extern int pcap_debug;
return pcap_debug;
],
ac_lbl_cv_pcap_debug_defined=yes,
ac_lbl_cv_pcap_debug_defined=no)
if test "$ac_lbl_cv_pcap_debug_defined" = yes ; then
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_PCAP_DEBUG)
else
AC_MSG_RESULT(no)
#
# OK, what about "yydebug"?
#
AC_MSG_CHECKING(whether yydebug is defined by libpcap)
AC_TRY_LINK([],
[
extern int yydebug;
return yydebug;
],
ac_lbl_cv_yydebug_defined=yes,
ac_lbl_cv_yydebug_defined=no)
if test "$ac_lbl_cv_yydebug_defined" = yes ; then
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_YYDEBUG)
else
AC_MSG_RESULT(no)
fi
fi
AC_REPLACE_FUNCS(bpf_dump) dnl moved to libpcap in 0.6
V_GROUP=0
1998-09-15 19:36:32 +00:00
if test -f /etc/group -a ! -z "`grep '^wheel:' /etc/group`" ; then
V_GROUP=wheel
fi
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#
# Assume V7/BSD convention for man pages (file formats in section 5,
# miscellaneous info in section 7).
#
MAN_FILE_FORMATS=5
MAN_MISC_INFO=7
case "$host_os" in
aix*)
dnl Workaround to enable certain features
2012-05-14 08:01:48 +00:00
AC_DEFINE(_SUN,1,[define on AIX to get certain functions])
;;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
hpux*)
#
# Use System V conventions for man pages.
#
MAN_FILE_FORMATS=4
MAN_MISC_INFO=5
;;
irix*)
V_GROUP=sys
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#
# Use System V conventions for man pages.
#
MAN_FILE_FORMATS=4
MAN_MISC_INFO=5
;;
osf*)
V_GROUP=system
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#
# Use System V conventions for man pages.
#
MAN_FILE_FORMATS=4
MAN_MISC_INFO=5
;;
solaris*)
V_GROUP=sys
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#
# Use System V conventions for man pages.
#
MAN_FILE_FORMATS=4
MAN_MISC_INFO=5
;;
esac
if test -f /dev/bpf0 ; then
V_GROUP=bpf
fi
AC_CHECK_HEADERS(sys/bitypes.h)
AC_CHECK_TYPE([int8_t], ,
[AC_DEFINE([int8_t], [signed char],
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
[Define to `signed char' if int8_t not defined.])],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif])
AC_CHECK_TYPE([u_int8_t], ,
[AC_DEFINE([u_int8_t], [unsigned char],
[Define to `unsigned char' if u_int8_t not defined.])],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif])
AC_CHECK_TYPE([int16_t], ,
[AC_DEFINE([int16_t], [short],
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
[Define to `short' if int16_t not defined.])]
[AC_INCLUDES_DEFAULT
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif])
AC_CHECK_TYPE([u_int16_t], ,
[AC_DEFINE([u_int16_t], [unsigned short],
[Define to `unsigned short' if u_int16_t not defined.])],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif])
AC_CHECK_TYPE([int32_t], ,
[AC_DEFINE([int32_t], [int],
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
[Define to `int' if int32_t not defined.])],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif])
AC_CHECK_TYPE([u_int32_t], ,
[AC_DEFINE([u_int32_t], [unsigned int],
[Define to `unsigned int' if u_int32_t not defined.])],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif])
AC_CHECK_TYPE([int64_t], ,
[AC_DEFINE([int64_t], [long long],
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
[Define to `long long' if int64_t not defined.])],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif])
AC_CHECK_TYPE([u_int64_t], ,
[AC_DEFINE([u_int64_t], [unsigned long long],
[Define to `unsigned long long' if u_int64_t not defined.])],
[AC_INCLUDES_DEFAULT
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif])
#
# We can't just check for <inttypes.h> - some systems have one that
# doesn't define all the PRI[doxu]64 macros.
#
AC_CHECK_HEADERS(inttypes.h,
[
#
# OK, we have inttypes.h, but does it define those macros?
#
AC_MSG_CHECKING([[whether inttypes.h defines the PRI[doxu]64 macros]])
AC_COMPILE_IFELSE(
[
AC_LANG_SOURCE(
[[
#include <inttypes.h>
#include <stdio.h>
#include <sys/types.h>
#ifdef HAVE_SYS_BITYPES_H
#include <sys/bitypes.h>
#endif
main()
{
printf("%" PRId64 "\n", (u_int64_t)1);
printf("%" PRIo64 "\n", (u_int64_t)1);
printf("%" PRIx64 "\n", (u_int64_t)1);
printf("%" PRIu64 "\n", (u_int64_t)1);
}
]])
],
[
AC_MSG_RESULT(yes)
ac_lbl_inttypes_h_defines_formats=yes
],
[
AC_MSG_RESULT(no)
ac_lbl_inttypes_h_defines_formats=no
])
],
[
#
# We don't have inttypes.h, so it obviously can't define those
# macros.
#
ac_lbl_inttypes_h_defines_formats=no
])
if test "$ac_lbl_inttypes_h_defines_formats" = no; then
AC_LBL_CHECK_64BIT_FORMAT(l,
[
AC_LBL_CHECK_64BIT_FORMAT(ll,
[
AC_LBL_CHECK_64BIT_FORMAT(L,
[
AC_LBL_CHECK_64BIT_FORMAT(q,
[
AC_MSG_ERROR([neither %llx nor %Lx nor %qx worked on a 64-bit integer])
])
])
])
])
fi
2012-05-14 08:01:48 +00:00
#
# Check for some headers introduced in later versions of libpcap
# and used by some printers.
#
# Those headers use the {u_}intN_t types, so we must do this after
# we check for what's needed to get them defined.
#
savedcppflags="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS $V_INCLS"
AC_CHECK_HEADERS(pcap/bluetooth.h,,,[#include <tcpdump-stdinc.h>])
AC_CHECK_HEADERS(pcap/usb.h,,,[#include <tcpdump-stdinc.h>])
CPPFLAGS="$savedcppflags"
2009-03-21 16:23:46 +00:00
AC_PROG_RANLIB
AC_LBL_DEVEL(V_CCOPT)
AC_LBL_SOCKADDR_SA_LEN
AC_LBL_UNALIGNED_ACCESS
AC_VAR_H_ERRNO
2013-05-30 06:46:26 +00:00
# Check for OpenSSL libcrypto
AC_MSG_CHECKING(whether to use OpenSSL libcrypto)
2009-03-21 16:23:46 +00:00
# Specify location for both includes and libraries.
2013-05-30 06:46:26 +00:00
want_libcrypto=ifavailable
2009-03-21 16:23:46 +00:00
AC_ARG_WITH(crypto,
2013-05-30 06:46:26 +00:00
AS_HELP_STRING([--with-crypto],
[use OpenSSL libcrypto @<:@default=yes, if available@:>@]),
2009-03-21 16:23:46 +00:00
[
if test $withval = no
then
want_libcrypto=no
AC_MSG_RESULT(no)
elif test $withval = yes
then
want_libcrypto=yes
AC_MSG_RESULT(yes)
fi
],[
#
2009-03-21 16:23:46 +00:00
# Use libcrypto if it's present, otherwise don't.
#
2009-03-21 16:23:46 +00:00
want_libcrypto=ifavailable
AC_MSG_RESULT([yes, if available])
])
if test "$want_libcrypto" != "no"; then
2013-05-30 06:46:26 +00:00
AC_CHECK_LIB(crypto, DES_cbc_encrypt)
AC_CHECK_HEADERS(openssl/evp.h)
1998-09-15 19:36:32 +00:00
fi
dnl
dnl set additional include path if necessary
if test "$missing_includes" = "yes"; then
2012-05-14 08:01:48 +00:00
CPPFLAGS="$CPPFLAGS -I$srcdir/missing"
V_INCLS="$V_INCLS -I$srcdir/missing"
fi
AC_SUBST(V_CCOPT)
AC_SUBST(V_DEFS)
AC_SUBST(V_GROUP)
AC_SUBST(V_INCLS)
AC_SUBST(V_PCAPDEP)
AC_SUBST(LOCALSRC)
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
AC_SUBST(MAN_FILE_FORMATS)
AC_SUBST(MAN_MISC_INFO)
AC_PROG_INSTALL
AC_CONFIG_HEADER(config.h)
AC_OUTPUT_COMMANDS([if test -f .devel; then
echo timestamp > stamp-h
cat Makefile-devel-adds >> Makefile
make depend
fi])
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
AC_OUTPUT(Makefile tcpdump.1)
exit 0