freebsd-skq/share/man/man4/ahd.4

143 lines
4.4 KiB
Groff
Raw Normal View History

2002-09-01 07:34:47 +00:00
.\"
.\" Copyright (c) 1995, 1996, 1997, 1998, 2000
.\" Justin T. Gibbs. All rights reserved.
.\" Copyright (c) 2002
.\" Scott Long. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. The name of the author may not be used to endorse or promote products
.\" derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd September 1, 2002
.Dt AHD 4
.Os
.Sh NAME
.Nm ahd
.Nd Adaptec PCI/PCI-X Ultra320 SCSI host adapter driver
.Sh SYNOPSIS
For one or more PCI/PCI-X cards:
.Cd device pci
.Cd device ahc
.Pp
To compile in debugging code.
.Cd options AHD_DEBUG
.Cd options AHD_DEBUG_OPTS <bitmask of options>
.Cd options AHD_REG_PRETTY_PRINT
.Pp
To configure one or more controllers to assume the target role:
.Cd options AHC_TMODE_ENABLE <bitmask of units>
.Pp
For one or more SCSI busses:
.Cd device scbus
.Sh DESCRIPTION
This driver provides access to the
.Tn SCSI
bus(es) connected to Adaptec
.Tn AIC7901
and
.Tn AIC7902
host adapter chips.
These chips are found on many motherboards as well as the
.Tn 29320
and
.Tn 39320
Adaptec SCSI controller cards.
.Pp
Driver features include support for narrow and wide busses,
fast, ultra, ultra2, ultra160, and ultra320 synchronous transfers,
packetized transfers, tagged queueing, 512 SCB's, and target mode.
.Pp
The
.Dq Dv AHD_DEBUG_OPTS
option is used to control which diagnostic messages are printed to the
console when
.Dq Dv AHD_DEBUG
is enabled. Logically 'or' the following bits together:
.Pp
.Bd -ragged -offset indent
.Bl -column "Value " Function
.Em "Value Function"
0x0001 Show miscellanious information
0x0002 Show sense data
0x0004 Show Serial EEPROM contents
0x0008 Show bus termination settings
0x0010 Show host memory usage
0x0020 Show SCSI protocol messages
0x0040 Show mode pointer of the chip register window
0x0080 Show selection timeouts
0x0100 Show FIFO usage messages
0x0200 Show Queue Full status
0x0400 Show SCB queue status
0x0800 Show inbound packet information
0x1000 Show S/G list information
0x2000 Enable extra diagnostic code in the firmware
.El
.Ed
.Pp
The
.Dq Dv AHD_REG_PRETTY_PRINT
option compiles in support for human-readable bit definitions for each register
that is printed by the debugging code. However, it also bloats the compiled
size of the driver by approximately 215KB.
.Pp
Individual controllers may be configured to operate in the target role
through the
.Dq Dv AHC_TMODE_ENABLE
configuration option. The value assigned to this option should be a bitmap
of all units where target mode is desired.
For example, a value of 0x25, would enable target mode on units 0, 2, and 5.
Note that target mode is only supoprted for ultra160 speeds and below.
.Pp
Per target configuration performed in the
.Tn SCSI-Select
menu, accessible at boot,
is honored by this driver.
This includes synchronous/asynchronous transfers,
maximum synchronous negotiation rate,
wide transfers,
disconnection,
and the host adapter's SCSI ID.
.Pp
.Sh SEE ALSO
.Xr ahc 4 ,
.Xr cd 4 ,
.Xr da 4 ,
.Xr sa 4 ,
.Xr scsi 4
.Sh AUTHORS
The
.Nm
driver, the
.Tn AIC7xxx
sequencer-code assembler,
and the firmware running on the aic79xx chips was written by
.An Justin T. Gibbs .
This manual page is based on the
.Xr ahc 4
manual page.
.Sh HISTORY
The
.Nm
driver first appeared in
.Fx 4.7 .