Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/*-
|
|
|
|
* BSD LICENSE
|
|
|
|
*
|
|
|
|
* Copyright (c) 2015-2017 Amazon.com, Inc. or its affiliates.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
*
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
*
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/bus.h>
|
|
|
|
#include <sys/endian.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/kthread.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/mbuf.h>
|
|
|
|
#include <sys/module.h>
|
|
|
|
#include <sys/rman.h>
|
|
|
|
#include <sys/smp.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/sockio.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <sys/taskqueue.h>
|
|
|
|
#include <sys/time.h>
|
|
|
|
#include <sys/eventhandler.h>
|
|
|
|
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <machine/resource.h>
|
|
|
|
#include <machine/in_cksum.h>
|
|
|
|
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_var.h>
|
|
|
|
#include <net/if_arp.h>
|
|
|
|
#include <net/if_dl.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_types.h>
|
|
|
|
#include <net/if_vlan_var.h>
|
|
|
|
|
|
|
|
#include <netinet/in_systm.h>
|
|
|
|
#include <netinet/in.h>
|
|
|
|
#include <netinet/if_ether.h>
|
|
|
|
#include <netinet/ip.h>
|
|
|
|
#include <netinet/ip6.h>
|
|
|
|
#include <netinet/tcp.h>
|
|
|
|
#include <netinet/udp.h>
|
|
|
|
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
|
|
|
|
|
|
#include "ena.h"
|
|
|
|
#include "ena_sysctl.h"
|
|
|
|
|
|
|
|
/*********************************************************
|
|
|
|
* Function prototypes
|
|
|
|
*********************************************************/
|
|
|
|
static int ena_probe(device_t);
|
|
|
|
static void ena_intr_msix_mgmnt(void *);
|
|
|
|
static int ena_allocate_pci_resources(struct ena_adapter*);
|
|
|
|
static void ena_free_pci_resources(struct ena_adapter *);
|
|
|
|
static int ena_change_mtu(if_t, int);
|
|
|
|
static inline void ena_alloc_counters(counter_u64_t *, int);
|
|
|
|
static inline void ena_free_counters(counter_u64_t *, int);
|
|
|
|
static inline void ena_reset_counters(counter_u64_t *, int);
|
|
|
|
static void ena_init_io_rings_common(struct ena_adapter *,
|
|
|
|
struct ena_ring *, uint16_t);
|
2017-11-07 13:20:41 +00:00
|
|
|
static void ena_init_io_rings(struct ena_adapter *);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
static void ena_free_io_ring_resources(struct ena_adapter *, unsigned int);
|
|
|
|
static void ena_free_all_io_rings_resources(struct ena_adapter *);
|
|
|
|
static int ena_setup_tx_dma_tag(struct ena_adapter *);
|
|
|
|
static int ena_free_tx_dma_tag(struct ena_adapter *);
|
|
|
|
static int ena_setup_rx_dma_tag(struct ena_adapter *);
|
|
|
|
static int ena_free_rx_dma_tag(struct ena_adapter *);
|
|
|
|
static int ena_setup_tx_resources(struct ena_adapter *, int);
|
|
|
|
static void ena_free_tx_resources(struct ena_adapter *, int);
|
|
|
|
static int ena_setup_all_tx_resources(struct ena_adapter *);
|
|
|
|
static void ena_free_all_tx_resources(struct ena_adapter *);
|
2017-11-09 11:45:59 +00:00
|
|
|
static inline int validate_rx_req_id(struct ena_ring *, uint16_t);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
static int ena_setup_rx_resources(struct ena_adapter *, unsigned int);
|
|
|
|
static void ena_free_rx_resources(struct ena_adapter *, unsigned int);
|
|
|
|
static int ena_setup_all_rx_resources(struct ena_adapter *);
|
|
|
|
static void ena_free_all_rx_resources(struct ena_adapter *);
|
|
|
|
static inline int ena_alloc_rx_mbuf(struct ena_adapter *, struct ena_ring *,
|
|
|
|
struct ena_rx_buffer *);
|
|
|
|
static void ena_free_rx_mbuf(struct ena_adapter *, struct ena_ring *,
|
|
|
|
struct ena_rx_buffer *);
|
|
|
|
static int ena_refill_rx_bufs(struct ena_ring *, uint32_t);
|
|
|
|
static void ena_free_rx_bufs(struct ena_adapter *, unsigned int);
|
|
|
|
static void ena_refill_all_rx_bufs(struct ena_adapter *);
|
|
|
|
static void ena_free_all_rx_bufs(struct ena_adapter *);
|
|
|
|
static void ena_free_tx_bufs(struct ena_adapter *, unsigned int);
|
|
|
|
static void ena_free_all_tx_bufs(struct ena_adapter *);
|
|
|
|
static void ena_destroy_all_tx_queues(struct ena_adapter *);
|
|
|
|
static void ena_destroy_all_rx_queues(struct ena_adapter *);
|
|
|
|
static void ena_destroy_all_io_queues(struct ena_adapter *);
|
|
|
|
static int ena_create_io_queues(struct ena_adapter *);
|
|
|
|
static int ena_tx_cleanup(struct ena_ring *);
|
2017-11-09 11:48:22 +00:00
|
|
|
static void ena_deferred_rx_cleanup(void *, int);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
static int ena_rx_cleanup(struct ena_ring *);
|
2017-11-07 13:26:11 +00:00
|
|
|
static inline int validate_tx_req_id(struct ena_ring *, uint16_t);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
static void ena_rx_hash_mbuf(struct ena_ring *, struct ena_com_rx_ctx *,
|
|
|
|
struct mbuf *);
|
|
|
|
static struct mbuf* ena_rx_mbuf(struct ena_ring *, struct ena_com_rx_buf_info *,
|
|
|
|
struct ena_com_rx_ctx *, uint16_t *);
|
|
|
|
static inline void ena_rx_checksum(struct ena_ring *, struct ena_com_rx_ctx *,
|
|
|
|
struct mbuf *);
|
|
|
|
static void ena_handle_msix(void *);
|
|
|
|
static int ena_enable_msix(struct ena_adapter *);
|
|
|
|
static void ena_setup_mgmnt_intr(struct ena_adapter *);
|
|
|
|
static void ena_setup_io_intr(struct ena_adapter *);
|
|
|
|
static int ena_request_mgmnt_irq(struct ena_adapter *);
|
|
|
|
static int ena_request_io_irq(struct ena_adapter *);
|
|
|
|
static void ena_free_mgmnt_irq(struct ena_adapter *);
|
|
|
|
static void ena_free_io_irq(struct ena_adapter *);
|
|
|
|
static void ena_free_irqs(struct ena_adapter*);
|
|
|
|
static void ena_disable_msix(struct ena_adapter *);
|
|
|
|
static void ena_unmask_all_io_irqs(struct ena_adapter *);
|
|
|
|
static int ena_rss_configure(struct ena_adapter *);
|
|
|
|
static int ena_up_complete(struct ena_adapter *);
|
|
|
|
static int ena_up(struct ena_adapter *);
|
|
|
|
static void ena_down(struct ena_adapter *);
|
|
|
|
static uint64_t ena_get_counter(if_t, ift_counter);
|
|
|
|
static int ena_media_change(if_t);
|
|
|
|
static void ena_media_status(if_t, struct ifmediareq *);
|
|
|
|
static void ena_init(void *);
|
|
|
|
static int ena_ioctl(if_t, u_long, caddr_t);
|
|
|
|
static int ena_get_dev_offloads(struct ena_com_dev_get_features_ctx *);
|
|
|
|
static void ena_update_host_info(struct ena_admin_host_info *, if_t);
|
|
|
|
static void ena_update_hwassist(struct ena_adapter *);
|
|
|
|
static int ena_setup_ifnet(device_t, struct ena_adapter *,
|
|
|
|
struct ena_com_dev_get_features_ctx *);
|
|
|
|
static void ena_tx_csum(struct ena_com_tx_ctx *, struct mbuf *);
|
2017-07-04 00:10:29 +00:00
|
|
|
static int ena_check_and_collapse_mbuf(struct ena_ring *tx_ring,
|
|
|
|
struct mbuf **mbuf);
|
2017-05-30 11:53:18 +00:00
|
|
|
static int ena_xmit_mbuf(struct ena_ring *, struct mbuf **);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
static void ena_start_xmit(struct ena_ring *);
|
|
|
|
static int ena_mq_start(if_t, struct mbuf *);
|
|
|
|
static void ena_deferred_mq_start(void *, int);
|
|
|
|
static void ena_qflush(if_t);
|
|
|
|
static int ena_calc_io_queue_num(struct ena_adapter *,
|
|
|
|
struct ena_com_dev_get_features_ctx *);
|
|
|
|
static int ena_calc_queue_size(struct ena_adapter *, uint16_t *,
|
|
|
|
uint16_t *, struct ena_com_dev_get_features_ctx *);
|
|
|
|
static int ena_rss_init_default(struct ena_adapter *);
|
|
|
|
static void ena_rss_init_default_deferred(void *);
|
|
|
|
static void ena_config_host_info(struct ena_com_dev *);
|
|
|
|
static int ena_attach(device_t);
|
|
|
|
static int ena_detach(device_t);
|
|
|
|
static int ena_device_init(struct ena_adapter *, device_t,
|
|
|
|
struct ena_com_dev_get_features_ctx *, int *);
|
|
|
|
static int ena_enable_msix_and_set_admin_interrupts(struct ena_adapter *,
|
|
|
|
int);
|
|
|
|
static void ena_update_on_link_change(void *, struct ena_admin_aenq_entry *);
|
|
|
|
static void unimplemented_aenq_handler(void *,
|
|
|
|
struct ena_admin_aenq_entry *);
|
|
|
|
static void ena_timer_service(void *);
|
|
|
|
|
|
|
|
static char ena_version[] = DEVICE_NAME DRV_MODULE_NAME " v" DRV_MODULE_VERSION;
|
|
|
|
|
|
|
|
static SYSCTL_NODE(_hw, OID_AUTO, ena, CTLFLAG_RD, 0, "ENA driver parameters");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Tuneable number of buffers in the buf-ring (drbr)
|
|
|
|
*/
|
|
|
|
static int ena_buf_ring_size = 4096;
|
|
|
|
SYSCTL_INT(_hw_ena, OID_AUTO, buf_ring_size, CTLFLAG_RWTUN,
|
|
|
|
&ena_buf_ring_size, 0, "Size of the bufring");
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
/*
|
|
|
|
* Logging level for changing verbosity of the output
|
|
|
|
*/
|
|
|
|
int ena_log_level = ENA_ALERT | ENA_WARNING;
|
|
|
|
SYSCTL_INT(_hw_ena, OID_AUTO, log_level, CTLFLAG_RWTUN,
|
|
|
|
&ena_log_level, 0, "Logging level indicating verbosity of the logs");
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
static ena_vendor_info_t ena_vendor_info_array[] = {
|
|
|
|
{ PCI_VENDOR_ID_AMAZON, PCI_DEV_ID_ENA_PF, 0},
|
|
|
|
{ PCI_VENDOR_ID_AMAZON, PCI_DEV_ID_ENA_LLQ_PF, 0},
|
|
|
|
{ PCI_VENDOR_ID_AMAZON, PCI_DEV_ID_ENA_VF, 0},
|
|
|
|
{ PCI_VENDOR_ID_AMAZON, PCI_DEV_ID_ENA_LLQ_VF, 0},
|
|
|
|
/* Last entry */
|
|
|
|
{ 0, 0, 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Contains pointers to event handlers, e.g. link state chage.
|
|
|
|
*/
|
|
|
|
static struct ena_aenq_handlers aenq_handlers;
|
|
|
|
|
|
|
|
void
|
|
|
|
ena_dmamap_callback(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
|
|
{
|
2017-11-09 11:57:02 +00:00
|
|
|
if (error != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
*(bus_addr_t *) arg = segs[0].ds_addr;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
ena_dma_alloc(device_t dmadev, bus_size_t size,
|
|
|
|
ena_mem_handle_t *dma , int mapflags)
|
|
|
|
{
|
|
|
|
struct ena_adapter* adapter = device_get_softc(dmadev);
|
2017-11-09 11:57:02 +00:00
|
|
|
uint32_t maxsize;
|
|
|
|
uint64_t dma_space_addr;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
int error;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
maxsize = ((size - 1) / PAGE_SIZE + 1) * PAGE_SIZE;
|
|
|
|
|
|
|
|
dma_space_addr = ENA_DMA_BIT_MASK(adapter->dma_width);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(dma_space_addr == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
dma_space_addr = BUS_SPACE_MAXADDR;
|
2017-11-09 11:57:02 +00:00
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(dmadev), /* parent */
|
2017-07-04 00:08:47 +00:00
|
|
|
8, 0, /* alignment, bounds */
|
|
|
|
dma_space_addr, /* lowaddr of exclusion window */
|
|
|
|
BUS_SPACE_MAXADDR,/* highaddr of exclusion window */
|
|
|
|
NULL, NULL, /* filter, filterarg */
|
|
|
|
maxsize, /* maxsize */
|
|
|
|
1, /* nsegments */
|
|
|
|
maxsize, /* maxsegsize */
|
|
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
|
|
NULL, /* lockfunc */
|
|
|
|
NULL, /* lockarg */
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
&dma->tag);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(error != 0)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_ALERT, "bus_dma_tag_create failed: %d\n", error);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
goto fail_tag;
|
|
|
|
}
|
|
|
|
|
|
|
|
error = bus_dmamem_alloc(dma->tag, (void**) &dma->vaddr,
|
|
|
|
BUS_DMA_COHERENT | BUS_DMA_ZERO, &dma->map);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(error != 0)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_ALERT, "bus_dmamem_alloc(%ju) failed: %d\n",
|
|
|
|
(uintmax_t)size, error);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
goto fail_map_create;
|
|
|
|
}
|
|
|
|
|
|
|
|
dma->paddr = 0;
|
|
|
|
error = bus_dmamap_load(dma->tag, dma->map, dma->vaddr,
|
|
|
|
size, ena_dmamap_callback, &dma->paddr, mapflags);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((error != 0) || (dma->paddr == 0))) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_ALERT, ": bus_dmamap_load failed: %d\n", error);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
goto fail_map_load;
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
fail_map_load:
|
|
|
|
bus_dmamem_free(dma->tag, dma->vaddr, dma->map);
|
2017-11-09 11:54:32 +00:00
|
|
|
fail_map_create:
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
bus_dma_tag_destroy(dma->tag);
|
|
|
|
fail_tag:
|
|
|
|
dma->tag = NULL;
|
|
|
|
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_allocate_pci_resources(struct ena_adapter* adapter)
|
|
|
|
{
|
|
|
|
device_t pdev = adapter->pdev;
|
|
|
|
int rid;
|
|
|
|
|
|
|
|
rid = PCIR_BAR(ENA_REG_BAR);
|
|
|
|
adapter->memory = NULL;
|
|
|
|
adapter->registers = bus_alloc_resource_any(pdev, SYS_RES_MEMORY,
|
|
|
|
&rid, RF_ACTIVE);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(adapter->registers == NULL)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "Unable to allocate bus resource: "
|
|
|
|
"registers\n");
|
|
|
|
return (ENXIO);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_pci_resources(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
device_t pdev = adapter->pdev;
|
|
|
|
|
|
|
|
if (adapter->memory != NULL) {
|
|
|
|
bus_release_resource(pdev, SYS_RES_MEMORY,
|
|
|
|
PCIR_BAR(ENA_MEM_BAR), adapter->memory);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (adapter->registers != NULL) {
|
|
|
|
bus_release_resource(pdev, SYS_RES_MEMORY,
|
|
|
|
PCIR_BAR(ENA_REG_BAR), adapter->registers);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_probe(device_t dev)
|
|
|
|
{
|
|
|
|
ena_vendor_info_t *ent;
|
|
|
|
char adapter_name[60];
|
|
|
|
uint16_t pci_vendor_id = 0;
|
|
|
|
uint16_t pci_device_id = 0;
|
|
|
|
|
|
|
|
pci_vendor_id = pci_get_vendor(dev);
|
|
|
|
pci_device_id = pci_get_device(dev);
|
|
|
|
|
|
|
|
ent = ena_vendor_info_array;
|
|
|
|
while (ent->vendor_id != 0) {
|
|
|
|
if ((pci_vendor_id == ent->vendor_id) &&
|
|
|
|
(pci_device_id == ent->device_id)) {
|
|
|
|
ena_trace(ENA_DBG, "vendor=%x device=%x ",
|
|
|
|
pci_vendor_id, pci_device_id);
|
|
|
|
|
|
|
|
sprintf(adapter_name, DEVICE_DESC);
|
|
|
|
device_set_desc_copy(dev, adapter_name);
|
|
|
|
return (BUS_PROBE_DEFAULT);
|
|
|
|
}
|
|
|
|
|
|
|
|
ent++;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
return (ENXIO);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_change_mtu(if_t ifp, int new_mtu)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = if_getsoftc(ifp);
|
2017-11-09 13:35:07 +00:00
|
|
|
int rc;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 13:35:07 +00:00
|
|
|
if ((new_mtu > adapter->max_mtu) || (new_mtu < ENA_MIN_MTU)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "Invalid MTU setting. "
|
2017-11-09 13:35:07 +00:00
|
|
|
"new_mtu: %d max mtu: %d min mtu: %d\n",
|
|
|
|
new_mtu, adapter->max_mtu, ENA_MIN_MTU);
|
|
|
|
return (EINVAL);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
rc = ena_com_set_dev_mtu(adapter->ena_dev, new_mtu);
|
2017-11-09 13:35:07 +00:00
|
|
|
if (likely(rc == 0)) {
|
|
|
|
ena_trace(ENA_DBG, "set MTU to %d\n", new_mtu);
|
|
|
|
if_setmtu(ifp, new_mtu);
|
|
|
|
} else {
|
|
|
|
device_printf(adapter->pdev, "Failed to set MTU to %d\n",
|
|
|
|
new_mtu);
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 13:35:07 +00:00
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
ena_alloc_counters(counter_u64_t *begin, int size)
|
|
|
|
{
|
|
|
|
counter_u64_t *end = (counter_u64_t *)((char *)begin + size);
|
|
|
|
|
|
|
|
for (; begin < end; ++begin)
|
|
|
|
*begin = counter_u64_alloc(M_WAITOK);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
ena_free_counters(counter_u64_t *begin, int size)
|
|
|
|
{
|
|
|
|
counter_u64_t *end = (counter_u64_t *)((char *)begin + size);
|
|
|
|
|
|
|
|
for (; begin < end; ++begin)
|
|
|
|
counter_u64_free(*begin);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
ena_reset_counters(counter_u64_t *begin, int size)
|
|
|
|
{
|
|
|
|
counter_u64_t *end = (counter_u64_t *)((char *)begin + size);
|
|
|
|
|
|
|
|
for (; begin < end; ++begin)
|
|
|
|
counter_u64_zero(*begin);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_init_io_rings_common(struct ena_adapter *adapter, struct ena_ring *ring,
|
|
|
|
uint16_t qid)
|
|
|
|
{
|
|
|
|
|
|
|
|
ring->qid = qid;
|
|
|
|
ring->adapter = adapter;
|
|
|
|
ring->ena_dev = adapter->ena_dev;
|
|
|
|
}
|
|
|
|
|
2017-11-07 13:20:41 +00:00
|
|
|
static void
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_init_io_rings(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_com_dev *ena_dev;
|
|
|
|
struct ena_ring *txr, *rxr;
|
|
|
|
struct ena_que *que;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
ena_dev = adapter->ena_dev;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
txr = &adapter->tx_ring[i];
|
|
|
|
rxr = &adapter->rx_ring[i];
|
|
|
|
|
|
|
|
/* TX/RX common ring state */
|
|
|
|
ena_init_io_rings_common(adapter, txr, i);
|
|
|
|
ena_init_io_rings_common(adapter, rxr, i);
|
|
|
|
|
|
|
|
/* TX specific ring state */
|
|
|
|
txr->ring_size = adapter->tx_ring_size;
|
|
|
|
txr->tx_max_header_size = ena_dev->tx_max_header_size;
|
|
|
|
txr->tx_mem_queue_type = ena_dev->tx_mem_queue_type;
|
|
|
|
txr->smoothed_interval =
|
|
|
|
ena_com_get_nonadaptive_moderation_interval_tx(ena_dev);
|
|
|
|
|
|
|
|
/* Allocate a buf ring */
|
|
|
|
txr->br = buf_ring_alloc(ena_buf_ring_size, M_DEVBUF,
|
|
|
|
M_WAITOK, &txr->ring_mtx);
|
|
|
|
|
|
|
|
/* Alloc TX statistics. */
|
|
|
|
ena_alloc_counters((counter_u64_t *)&txr->tx_stats,
|
|
|
|
sizeof(txr->tx_stats));
|
|
|
|
|
|
|
|
/* RX specific ring state */
|
|
|
|
rxr->ring_size = adapter->rx_ring_size;
|
|
|
|
rxr->smoothed_interval =
|
|
|
|
ena_com_get_nonadaptive_moderation_interval_rx(ena_dev);
|
|
|
|
|
|
|
|
/* Alloc RX statistics. */
|
|
|
|
ena_alloc_counters((counter_u64_t *)&rxr->rx_stats,
|
|
|
|
sizeof(rxr->rx_stats));
|
|
|
|
|
|
|
|
/* Initialize locks */
|
|
|
|
snprintf(txr->mtx_name, nitems(txr->mtx_name), "%s:tx(%d)",
|
|
|
|
device_get_nameunit(adapter->pdev), i);
|
|
|
|
snprintf(rxr->mtx_name, nitems(rxr->mtx_name), "%s:rx(%d)",
|
|
|
|
device_get_nameunit(adapter->pdev), i);
|
|
|
|
|
|
|
|
mtx_init(&txr->ring_mtx, txr->mtx_name, NULL, MTX_DEF);
|
2017-11-09 11:48:22 +00:00
|
|
|
mtx_init(&rxr->ring_mtx, rxr->mtx_name, NULL, MTX_DEF);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
que = &adapter->que[i];
|
|
|
|
que->adapter = adapter;
|
|
|
|
que->id = i;
|
|
|
|
que->tx_ring = txr;
|
|
|
|
que->rx_ring = rxr;
|
|
|
|
|
|
|
|
txr->que = que;
|
|
|
|
rxr->que = que;
|
2017-11-09 11:48:22 +00:00
|
|
|
|
|
|
|
rxr->empty_rx_queue = 0;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_io_ring_resources(struct ena_adapter *adapter, unsigned int qid)
|
|
|
|
{
|
|
|
|
struct ena_ring *txr = &adapter->tx_ring[qid];
|
|
|
|
struct ena_ring *rxr = &adapter->rx_ring[qid];
|
|
|
|
|
|
|
|
ena_free_counters((counter_u64_t *)&txr->tx_stats,
|
|
|
|
sizeof(txr->tx_stats));
|
|
|
|
ena_free_counters((counter_u64_t *)&rxr->rx_stats,
|
|
|
|
sizeof(rxr->rx_stats));
|
|
|
|
|
2017-11-09 11:54:32 +00:00
|
|
|
ENA_RING_MTX_LOCK(txr);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
drbr_free(txr->br, M_DEVBUF);
|
2017-11-09 11:54:32 +00:00
|
|
|
ENA_RING_MTX_UNLOCK(txr);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 11:54:32 +00:00
|
|
|
mtx_destroy(&txr->ring_mtx);
|
|
|
|
mtx_destroy(&rxr->ring_mtx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_all_io_rings_resources(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++)
|
|
|
|
ena_free_io_ring_resources(adapter, i);
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_setup_tx_dma_tag(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Create DMA tag for Tx buffers */
|
|
|
|
ret = bus_dma_tag_create(bus_get_dma_tag(adapter->pdev),
|
2017-07-04 00:08:47 +00:00
|
|
|
1, 0, /* alignment, bounds */
|
|
|
|
ENA_DMA_BIT_MASK(adapter->dma_width), /* lowaddr of excl window */
|
|
|
|
BUS_SPACE_MAXADDR, /* highaddr of excl window */
|
|
|
|
NULL, NULL, /* filter, filterarg */
|
|
|
|
ENA_TSO_MAXSIZE, /* maxsize */
|
|
|
|
adapter->max_tx_sgl_size - 1, /* nsegments */
|
|
|
|
ENA_TSO_MAXSIZE, /* maxsegsize */
|
|
|
|
0, /* flags */
|
|
|
|
NULL, /* lockfunc */
|
|
|
|
NULL, /* lockfuncarg */
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
&adapter->tx_buf_tag);
|
|
|
|
|
|
|
|
return (ret);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_free_tx_dma_tag(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = bus_dma_tag_destroy(adapter->tx_buf_tag);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(ret == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->tx_buf_tag = NULL;
|
|
|
|
|
|
|
|
return (ret);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_setup_rx_dma_tag(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Create DMA tag for Rx buffers*/
|
2017-07-04 00:08:47 +00:00
|
|
|
ret = bus_dma_tag_create(bus_get_dma_tag(adapter->pdev), /* parent */
|
|
|
|
1, 0, /* alignment, bounds */
|
|
|
|
ENA_DMA_BIT_MASK(adapter->dma_width), /* lowaddr of excl window */
|
|
|
|
BUS_SPACE_MAXADDR, /* highaddr of excl window */
|
|
|
|
NULL, NULL, /* filter, filterarg */
|
|
|
|
MJUM16BYTES, /* maxsize */
|
2017-11-09 13:36:42 +00:00
|
|
|
adapter->max_rx_sgl_size, /* nsegments */
|
2017-07-04 00:08:47 +00:00
|
|
|
MJUM16BYTES, /* maxsegsize */
|
|
|
|
0, /* flags */
|
|
|
|
NULL, /* lockfunc */
|
|
|
|
NULL, /* lockarg */
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
&adapter->rx_buf_tag);
|
|
|
|
|
|
|
|
return (ret);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_free_rx_dma_tag(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = bus_dma_tag_destroy(adapter->rx_buf_tag);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(ret == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->rx_buf_tag = NULL;
|
|
|
|
|
|
|
|
return (ret);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_setup_tx_resources - allocate Tx resources (Descriptors)
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
* @qid: queue index
|
|
|
|
*
|
|
|
|
* Returns 0 on success, otherwise on failure.
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_setup_tx_resources(struct ena_adapter *adapter, int qid)
|
|
|
|
{
|
|
|
|
struct ena_que *que = &adapter->que[qid];
|
|
|
|
struct ena_ring *tx_ring = que->tx_ring;
|
|
|
|
int size, i, err;
|
|
|
|
|
|
|
|
size = sizeof(struct ena_tx_buffer) * tx_ring->ring_size;
|
|
|
|
|
|
|
|
tx_ring->tx_buffer_info = malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(tx_ring->tx_buffer_info == NULL))
|
2017-11-09 11:54:32 +00:00
|
|
|
return (ENOMEM);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
size = sizeof(uint16_t) * tx_ring->ring_size;
|
|
|
|
tx_ring->free_tx_ids = malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(tx_ring->free_tx_ids == NULL))
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_buf_info_free;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* Req id stack for TX OOO completions */
|
|
|
|
for (i = 0; i < tx_ring->ring_size; i++)
|
|
|
|
tx_ring->free_tx_ids[i] = i;
|
|
|
|
|
|
|
|
/* Reset TX statistics. */
|
|
|
|
ena_reset_counters((counter_u64_t *)&tx_ring->tx_stats,
|
|
|
|
sizeof(tx_ring->tx_stats));
|
|
|
|
|
|
|
|
tx_ring->next_to_use = 0;
|
|
|
|
tx_ring->next_to_clean = 0;
|
|
|
|
|
|
|
|
/* Make sure that drbr is empty */
|
2017-07-04 00:00:42 +00:00
|
|
|
ENA_RING_MTX_LOCK(tx_ring);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
drbr_flush(adapter->ifp, tx_ring->br);
|
2017-07-04 00:00:42 +00:00
|
|
|
ENA_RING_MTX_UNLOCK(tx_ring);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* ... and create the buffer DMA maps */
|
|
|
|
for (i = 0; i < tx_ring->ring_size; i++) {
|
|
|
|
err = bus_dmamap_create(adapter->tx_buf_tag, 0,
|
|
|
|
&tx_ring->tx_buffer_info[i].map);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(err != 0)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_ALERT,
|
|
|
|
"Unable to create Tx DMA map for buffer %d\n", i);
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_buf_info_unmap;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allocate taskqueues */
|
|
|
|
TASK_INIT(&tx_ring->enqueue_task, 0, ena_deferred_mq_start, tx_ring);
|
|
|
|
tx_ring->enqueue_tq = taskqueue_create_fast("ena_tx_enque", M_NOWAIT,
|
|
|
|
taskqueue_thread_enqueue, &tx_ring->enqueue_tq);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(tx_ring->enqueue_tq == NULL)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_ALERT,
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
"Unable to create taskqueue for enqueue task\n");
|
|
|
|
i = tx_ring->ring_size;
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_buf_info_unmap;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
taskqueue_start_threads(&tx_ring->enqueue_tq, 1, PI_NET,
|
|
|
|
"%s txeq %d", device_get_nameunit(adapter->pdev), que->cpu);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
2017-11-09 11:54:32 +00:00
|
|
|
err_buf_info_unmap:
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
while (i--) {
|
|
|
|
bus_dmamap_destroy(adapter->tx_buf_tag,
|
|
|
|
tx_ring->tx_buffer_info[i].map);
|
|
|
|
}
|
2017-11-07 13:20:41 +00:00
|
|
|
free(tx_ring->free_tx_ids, M_DEVBUF);
|
2017-11-09 11:54:32 +00:00
|
|
|
tx_ring->free_tx_ids = NULL;
|
|
|
|
err_buf_info_free:
|
2017-11-07 13:20:41 +00:00
|
|
|
free(tx_ring->tx_buffer_info, M_DEVBUF);
|
2017-11-09 11:54:32 +00:00
|
|
|
tx_ring->tx_buffer_info = NULL;
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_free_tx_resources - Free Tx Resources per Queue
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
* @qid: queue index
|
|
|
|
*
|
|
|
|
* Free all transmit software resources
|
|
|
|
**/
|
|
|
|
static void
|
|
|
|
ena_free_tx_resources(struct ena_adapter *adapter, int qid)
|
|
|
|
{
|
|
|
|
struct ena_ring *tx_ring = &adapter->tx_ring[qid];
|
|
|
|
|
|
|
|
while (taskqueue_cancel(tx_ring->enqueue_tq, &tx_ring->enqueue_task,
|
|
|
|
NULL))
|
|
|
|
taskqueue_drain(tx_ring->enqueue_tq, &tx_ring->enqueue_task);
|
|
|
|
|
|
|
|
taskqueue_free(tx_ring->enqueue_tq);
|
|
|
|
|
2017-07-04 00:00:42 +00:00
|
|
|
ENA_RING_MTX_LOCK(tx_ring);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* Flush buffer ring, */
|
|
|
|
drbr_flush(adapter->ifp, tx_ring->br);
|
|
|
|
|
|
|
|
/* Free buffer DMA maps, */
|
|
|
|
for (int i = 0; i < tx_ring->ring_size; i++) {
|
|
|
|
m_freem(tx_ring->tx_buffer_info[i].mbuf);
|
|
|
|
tx_ring->tx_buffer_info[i].mbuf = NULL;
|
|
|
|
bus_dmamap_unload(adapter->tx_buf_tag,
|
|
|
|
tx_ring->tx_buffer_info[i].map);
|
|
|
|
bus_dmamap_destroy(adapter->tx_buf_tag,
|
|
|
|
tx_ring->tx_buffer_info[i].map);
|
|
|
|
}
|
2017-05-30 12:00:56 +00:00
|
|
|
ENA_RING_MTX_UNLOCK(tx_ring);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* And free allocated memory. */
|
2017-11-07 13:20:41 +00:00
|
|
|
free(tx_ring->tx_buffer_info, M_DEVBUF);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
tx_ring->tx_buffer_info = NULL;
|
|
|
|
|
2017-11-07 13:20:41 +00:00
|
|
|
free(tx_ring->free_tx_ids, M_DEVBUF);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
tx_ring->free_tx_ids = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_setup_all_tx_resources - allocate all queues Tx resources
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
*
|
|
|
|
* Returns 0 on success, otherwise on failure.
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_setup_all_tx_resources(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int i, rc;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
rc = ena_setup_tx_resources(adapter, i);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (rc != 0) {
|
2017-11-09 11:54:32 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Allocation for Tx Queue %u failed\n", i);
|
|
|
|
goto err_setup_tx;
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
err_setup_tx:
|
|
|
|
/* Rewind the index freeing the rings as we go */
|
|
|
|
while (i--)
|
|
|
|
ena_free_tx_resources(adapter, i);
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_free_all_tx_resources - Free Tx Resources for All Queues
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
*
|
|
|
|
* Free all transmit software resources
|
|
|
|
**/
|
|
|
|
static void
|
|
|
|
ena_free_all_tx_resources(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++)
|
|
|
|
ena_free_tx_resources(adapter, i);
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
static inline int
|
|
|
|
validate_rx_req_id(struct ena_ring *rx_ring, uint16_t req_id)
|
|
|
|
{
|
|
|
|
if (likely(req_id < rx_ring->ring_size))
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
device_printf(rx_ring->adapter->pdev, "Invalid rx req_id: %hu\n",
|
|
|
|
req_id);
|
|
|
|
counter_u64_add(rx_ring->rx_stats.bad_req_id, 1);
|
|
|
|
|
|
|
|
/* Trigger device reset */
|
|
|
|
rx_ring->adapter->reset_reason = ENA_REGS_RESET_INV_RX_REQ_ID;
|
|
|
|
rx_ring->adapter->trigger_reset = true;
|
|
|
|
|
|
|
|
return (EFAULT);
|
|
|
|
}
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/**
|
|
|
|
* ena_setup_rx_resources - allocate Rx resources (Descriptors)
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
* @qid: queue index
|
|
|
|
*
|
|
|
|
* Returns 0 on success, otherwise on failure.
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_setup_rx_resources(struct ena_adapter *adapter, unsigned int qid)
|
|
|
|
{
|
|
|
|
struct ena_que *que = &adapter->que[qid];
|
|
|
|
struct ena_ring *rx_ring = que->rx_ring;
|
|
|
|
int size, err, i;
|
|
|
|
|
|
|
|
size = sizeof(struct ena_rx_buffer) * rx_ring->ring_size;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Alloc extra element so in rx path
|
|
|
|
* we can always prefetch rx_info + 1
|
|
|
|
*/
|
|
|
|
size += sizeof(struct ena_rx_buffer);
|
|
|
|
|
2017-11-07 13:20:41 +00:00
|
|
|
rx_ring->rx_buffer_info = malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
size = sizeof(uint16_t) * rx_ring->ring_size;
|
|
|
|
rx_ring->free_rx_ids = malloc(size, M_DEVBUF, M_WAITOK);
|
|
|
|
|
|
|
|
for (i = 0; i < rx_ring->ring_size; i++)
|
|
|
|
rx_ring->free_rx_ids[i] = i;
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* Reset RX statistics. */
|
|
|
|
ena_reset_counters((counter_u64_t *)&rx_ring->rx_stats,
|
|
|
|
sizeof(rx_ring->rx_stats));
|
|
|
|
|
|
|
|
rx_ring->next_to_clean = 0;
|
|
|
|
rx_ring->next_to_use = 0;
|
|
|
|
|
|
|
|
/* ... and create the buffer DMA maps */
|
|
|
|
for (i = 0; i < rx_ring->ring_size; i++) {
|
|
|
|
err = bus_dmamap_create(adapter->rx_buf_tag, 0,
|
|
|
|
&(rx_ring->rx_buffer_info[i].map));
|
|
|
|
if (err != 0) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_ALERT,
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
"Unable to create Rx DMA map for buffer %d\n", i);
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_buf_info_unmap;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Create LRO for the ring */
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((adapter->ifp->if_capenable & IFCAP_LRO) != 0) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
int err = tcp_lro_init(&rx_ring->lro);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (err != 0) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"LRO[%d] Initialization failed!\n", qid);
|
|
|
|
} else {
|
|
|
|
ena_trace(ENA_INFO,
|
|
|
|
"RX Soft LRO[%d] Initialized\n", qid);
|
|
|
|
rx_ring->lro.ifp = adapter->ifp;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:48:22 +00:00
|
|
|
/* Allocate taskqueues */
|
|
|
|
TASK_INIT(&rx_ring->cmpl_task, 0, ena_deferred_rx_cleanup, rx_ring);
|
|
|
|
rx_ring->cmpl_tq = taskqueue_create_fast("ena RX completion", M_WAITOK,
|
|
|
|
taskqueue_thread_enqueue, &rx_ring->cmpl_tq);
|
|
|
|
|
|
|
|
taskqueue_start_threads(&rx_ring->cmpl_tq, 1, PI_NET,
|
|
|
|
"%s rx_ring cmpl %d", device_get_nameunit(adapter->pdev), que->cpu);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (0);
|
|
|
|
|
2017-11-09 11:54:32 +00:00
|
|
|
err_buf_info_unmap:
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
while (i--) {
|
|
|
|
bus_dmamap_destroy(adapter->rx_buf_tag,
|
|
|
|
rx_ring->rx_buffer_info[i].map);
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
free(rx_ring->free_rx_ids, M_DEVBUF);
|
|
|
|
rx_ring->free_rx_ids = NULL;
|
2017-11-07 13:20:41 +00:00
|
|
|
free(rx_ring->rx_buffer_info, M_DEVBUF);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rx_ring->rx_buffer_info = NULL;
|
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_free_rx_resources - Free Rx Resources
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
* @qid: queue index
|
|
|
|
*
|
|
|
|
* Free all receive software resources
|
|
|
|
**/
|
|
|
|
static void
|
|
|
|
ena_free_rx_resources(struct ena_adapter *adapter, unsigned int qid)
|
|
|
|
{
|
|
|
|
struct ena_ring *rx_ring = &adapter->rx_ring[qid];
|
|
|
|
|
2017-11-09 11:48:22 +00:00
|
|
|
while (taskqueue_cancel(rx_ring->cmpl_tq, &rx_ring->cmpl_task, NULL) != 0)
|
|
|
|
taskqueue_drain(rx_ring->cmpl_tq, &rx_ring->cmpl_task);
|
|
|
|
|
|
|
|
taskqueue_free(rx_ring->cmpl_tq);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* Free buffer DMA maps, */
|
|
|
|
for (int i = 0; i < rx_ring->ring_size; i++) {
|
|
|
|
m_freem(rx_ring->rx_buffer_info[i].mbuf);
|
|
|
|
rx_ring->rx_buffer_info[i].mbuf = NULL;
|
|
|
|
bus_dmamap_unload(adapter->rx_buf_tag,
|
|
|
|
rx_ring->rx_buffer_info[i].map);
|
|
|
|
bus_dmamap_destroy(adapter->rx_buf_tag,
|
|
|
|
rx_ring->rx_buffer_info[i].map);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* free LRO resources, */
|
|
|
|
tcp_lro_free(&rx_ring->lro);
|
|
|
|
|
|
|
|
/* free allocated memory */
|
2017-11-07 13:20:41 +00:00
|
|
|
free(rx_ring->rx_buffer_info, M_DEVBUF);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rx_ring->rx_buffer_info = NULL;
|
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
free(rx_ring->free_rx_ids, M_DEVBUF);
|
|
|
|
rx_ring->free_rx_ids = NULL;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_setup_all_rx_resources - allocate all queues Rx resources
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
*
|
|
|
|
* Returns 0 on success, otherwise on failure.
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_setup_all_rx_resources(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int i, rc = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
rc = ena_setup_rx_resources(adapter, i);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (rc != 0) {
|
2017-11-09 11:54:32 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Allocation for Rx Queue %u failed\n", i);
|
|
|
|
goto err_setup_rx;
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
err_setup_rx:
|
|
|
|
/* rewind the index freeing the rings as we go */
|
|
|
|
while (i--)
|
|
|
|
ena_free_rx_resources(adapter, i);
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_free_all_rx_resources - Free Rx resources for all queues
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
*
|
|
|
|
* Free all receive software resources
|
|
|
|
**/
|
|
|
|
static void
|
|
|
|
ena_free_all_rx_resources(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++)
|
|
|
|
ena_free_rx_resources(adapter, i);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int
|
|
|
|
ena_alloc_rx_mbuf(struct ena_adapter *adapter,
|
|
|
|
struct ena_ring *rx_ring, struct ena_rx_buffer *rx_info)
|
|
|
|
{
|
|
|
|
struct ena_com_buf *ena_buf;
|
|
|
|
bus_dma_segment_t segs[1];
|
|
|
|
int nsegs, error;
|
2017-11-09 13:36:42 +00:00
|
|
|
int mlen;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* if previous allocated frag is not used */
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rx_info->mbuf != NULL))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (0);
|
|
|
|
|
|
|
|
/* Get mbuf using UMA allocator */
|
|
|
|
rx_info->mbuf = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUM16BYTES);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rx_info->mbuf == NULL)) {
|
2017-11-09 13:36:42 +00:00
|
|
|
counter_u64_add(rx_ring->rx_stats.mjum_alloc_fail, 1);
|
|
|
|
rx_info->mbuf = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
|
|
if (unlikely(rx_info->mbuf == NULL)) {
|
|
|
|
counter_u64_add(rx_ring->rx_stats.mbuf_alloc_fail, 1);
|
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
mlen = MCLBYTES;
|
|
|
|
} else {
|
|
|
|
mlen = MJUM16BYTES;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
/* Set mbuf length*/
|
2017-11-09 13:36:42 +00:00
|
|
|
rx_info->mbuf->m_pkthdr.len = rx_info->mbuf->m_len = mlen;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* Map packets for DMA */
|
|
|
|
ena_trace(ENA_DBG | ENA_RSC | ENA_RXPTH,
|
|
|
|
"Using tag %p for buffers' DMA mapping, mbuf %p len: %d",
|
|
|
|
adapter->rx_buf_tag,rx_info->mbuf, rx_info->mbuf->m_len);
|
|
|
|
error = bus_dmamap_load_mbuf_sg(adapter->rx_buf_tag, rx_info->map,
|
|
|
|
rx_info->mbuf, segs, &nsegs, BUS_DMA_NOWAIT);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((error != 0) || (nsegs != 1))) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_WARNING, "failed to map mbuf, error: %d, "
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
"nsegs: %d\n", error, nsegs);
|
|
|
|
counter_u64_add(rx_ring->rx_stats.dma_mapping_err, 1);
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
bus_dmamap_sync(adapter->rx_buf_tag, rx_info->map, BUS_DMASYNC_PREREAD);
|
|
|
|
|
|
|
|
ena_buf = &rx_info->ena_buf;
|
|
|
|
ena_buf->paddr = segs[0].ds_addr;
|
2017-11-09 13:36:42 +00:00
|
|
|
ena_buf->len = mlen;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
ena_trace(ENA_DBG | ENA_RSC | ENA_RXPTH,
|
|
|
|
"ALLOC RX BUF: mbuf %p, rx_info %p, len %d, paddr %#jx\n",
|
|
|
|
rx_info->mbuf, rx_info,ena_buf->len, (uintmax_t)ena_buf->paddr);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
exit:
|
|
|
|
m_freem(rx_info->mbuf);
|
|
|
|
rx_info->mbuf = NULL;
|
|
|
|
return (EFAULT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_rx_mbuf(struct ena_adapter *adapter, struct ena_ring *rx_ring,
|
|
|
|
struct ena_rx_buffer *rx_info)
|
|
|
|
{
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
if (rx_info->mbuf == NULL) {
|
|
|
|
ena_trace(ENA_WARNING, "Trying to free unallocated buffer\n");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
2017-11-09 13:30:39 +00:00
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
bus_dmamap_unload(adapter->rx_buf_tag, rx_info->map);
|
|
|
|
m_freem(rx_info->mbuf);
|
|
|
|
rx_info->mbuf = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_refill_rx_bufs - Refills ring with descriptors
|
|
|
|
* @rx_ring: the ring which we want to feed with free descriptors
|
|
|
|
* @num: number of descriptors to refill
|
|
|
|
* Refills the ring with newly allocated DMA-mapped mbufs for receiving
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_refill_rx_bufs(struct ena_ring *rx_ring, uint32_t num)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = rx_ring->adapter;
|
2017-11-09 11:45:59 +00:00
|
|
|
uint16_t next_to_use, req_id;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
uint32_t i;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
ena_trace(ENA_DBG | ENA_RXPTH | ENA_RSC, "refill qid: %d",
|
|
|
|
rx_ring->qid);
|
|
|
|
|
|
|
|
next_to_use = rx_ring->next_to_use;
|
|
|
|
|
|
|
|
for (i = 0; i < num; i++) {
|
2017-11-09 11:45:59 +00:00
|
|
|
struct ena_rx_buffer *rx_info;
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_trace(ENA_DBG | ENA_RXPTH | ENA_RSC,
|
|
|
|
"RX buffer - next to use: %d", next_to_use);
|
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
req_id = rx_ring->free_rx_ids[next_to_use];
|
|
|
|
rx_info = &rx_ring->rx_buffer_info[req_id];
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
rc = ena_alloc_rx_mbuf(adapter, rx_ring, rx_info);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_WARNING,
|
|
|
|
"failed to alloc buffer for rx queue %d\n",
|
|
|
|
rx_ring->qid);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
rc = ena_com_add_single_rx_desc(rx_ring->ena_com_io_sq,
|
2017-11-09 11:45:59 +00:00
|
|
|
&rx_info->ena_buf, req_id);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_WARNING,
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
"failed to add buffer for rx queue %d\n",
|
|
|
|
rx_ring->qid);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
next_to_use = ENA_RX_RING_IDX_NEXT(next_to_use,
|
|
|
|
rx_ring->ring_size);
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(i < num)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
counter_u64_add(rx_ring->rx_stats.refil_partial, 1);
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_WARNING,
|
|
|
|
"refilled rx qid %d with only %d mbufs (from %d)\n",
|
|
|
|
rx_ring->qid, i, num);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(i != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
wmb();
|
|
|
|
ena_com_write_sq_doorbell(rx_ring->ena_com_io_sq);
|
|
|
|
}
|
|
|
|
rx_ring->next_to_use = next_to_use;
|
|
|
|
return (i);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_rx_bufs(struct ena_adapter *adapter, unsigned int qid)
|
|
|
|
{
|
|
|
|
struct ena_ring *rx_ring = &adapter->rx_ring[qid];
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < rx_ring->ring_size; i++) {
|
|
|
|
struct ena_rx_buffer *rx_info = &rx_ring->rx_buffer_info[i];
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if (rx_info->mbuf != NULL)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_free_rx_mbuf(adapter, rx_ring, rx_info);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_refill_all_rx_bufs - allocate all queues Rx buffers
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
ena_refill_all_rx_bufs(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_ring *rx_ring;
|
|
|
|
int i, rc, bufs_num;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
rx_ring = &adapter->rx_ring[i];
|
|
|
|
bufs_num = rx_ring->ring_size - 1;
|
|
|
|
rc = ena_refill_rx_bufs(rx_ring, bufs_num);
|
|
|
|
|
|
|
|
if (unlikely(rc != bufs_num))
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_WARNING, "refilling Queue %d failed. "
|
|
|
|
"Allocated %d buffers from: %d\n", i, rc, bufs_num);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_all_rx_bufs(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++)
|
|
|
|
ena_free_rx_bufs(adapter, i);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_free_tx_bufs - Free Tx Buffers per Queue
|
|
|
|
* @adapter: network interface device structure
|
|
|
|
* @qid: queue index
|
|
|
|
**/
|
|
|
|
static void
|
|
|
|
ena_free_tx_bufs(struct ena_adapter *adapter, unsigned int qid)
|
|
|
|
{
|
2017-11-09 13:30:39 +00:00
|
|
|
bool print_once = true;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
struct ena_ring *tx_ring = &adapter->tx_ring[qid];
|
|
|
|
|
2017-05-30 12:00:56 +00:00
|
|
|
ENA_RING_MTX_LOCK(tx_ring);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
for (int i = 0; i < tx_ring->ring_size; i++) {
|
|
|
|
struct ena_tx_buffer *tx_info = &tx_ring->tx_buffer_info[i];
|
|
|
|
|
|
|
|
if (tx_info->mbuf == NULL)
|
|
|
|
continue;
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
if (print_once) {
|
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"free uncompleted tx mbuf qid %d idx 0x%x",
|
|
|
|
qid, i);
|
|
|
|
print_once = false;
|
|
|
|
} else {
|
|
|
|
ena_trace(ENA_DBG,
|
|
|
|
"free uncompleted tx mbuf qid %d idx 0x%x",
|
|
|
|
qid, i);
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
bus_dmamap_unload(adapter->tx_buf_tag, tx_info->map);
|
|
|
|
m_free(tx_info->mbuf);
|
|
|
|
tx_info->mbuf = NULL;
|
|
|
|
}
|
2017-05-30 12:00:56 +00:00
|
|
|
ENA_RING_MTX_UNLOCK(tx_ring);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_all_tx_bufs(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++)
|
|
|
|
ena_free_tx_bufs(adapter, i);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_destroy_all_tx_queues(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
uint16_t ena_qid;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
ena_qid = ENA_IO_TXQ_IDX(i);
|
|
|
|
ena_com_destroy_io_queue(adapter->ena_dev, ena_qid);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_destroy_all_rx_queues(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
uint16_t ena_qid;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
ena_qid = ENA_IO_RXQ_IDX(i);
|
|
|
|
ena_com_destroy_io_queue(adapter->ena_dev, ena_qid);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_destroy_all_io_queues(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
ena_destroy_all_tx_queues(adapter);
|
|
|
|
ena_destroy_all_rx_queues(adapter);
|
|
|
|
}
|
|
|
|
|
2017-11-07 13:26:11 +00:00
|
|
|
static inline int
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
validate_tx_req_id(struct ena_ring *tx_ring, uint16_t req_id)
|
|
|
|
{
|
2017-11-09 13:30:39 +00:00
|
|
|
struct ena_adapter *adapter = tx_ring->adapter;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
struct ena_tx_buffer *tx_info = NULL;
|
|
|
|
|
|
|
|
if (likely(req_id < tx_ring->ring_size)) {
|
|
|
|
tx_info = &tx_ring->tx_buffer_info[req_id];
|
2017-11-09 11:57:02 +00:00
|
|
|
if (tx_info->mbuf != NULL)
|
|
|
|
return (0);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
if (tx_info->mbuf == NULL)
|
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"tx_info doesn't have valid mbuf\n");
|
|
|
|
else
|
|
|
|
device_printf(adapter->pdev, "Invalid req_id: %hu\n", req_id);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
counter_u64_add(tx_ring->tx_stats.bad_req_id, 1);
|
|
|
|
|
|
|
|
return (EFAULT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_create_io_queues(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_com_dev *ena_dev = adapter->ena_dev;
|
|
|
|
struct ena_com_create_io_ctx ctx;
|
|
|
|
struct ena_ring *ring;
|
|
|
|
uint16_t ena_qid;
|
|
|
|
uint32_t msix_vector;
|
|
|
|
int rc, i;
|
|
|
|
|
|
|
|
/* Create TX queues */
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
msix_vector = ENA_IO_IRQ_IDX(i);
|
|
|
|
ena_qid = ENA_IO_TXQ_IDX(i);
|
|
|
|
ctx.mem_queue_type = ena_dev->tx_mem_queue_type;
|
|
|
|
ctx.direction = ENA_COM_IO_QUEUE_DIRECTION_TX;
|
|
|
|
ctx.queue_size = adapter->tx_ring_size;
|
|
|
|
ctx.msix_vector = msix_vector;
|
|
|
|
ctx.qid = ena_qid;
|
|
|
|
rc = ena_com_create_io_queue(ena_dev, &ctx);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (rc != 0) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Failed to create io TX queue #%d rc: %d\n", i, rc);
|
|
|
|
goto err_tx;
|
|
|
|
}
|
|
|
|
ring = &adapter->tx_ring[i];
|
|
|
|
rc = ena_com_get_io_handlers(ena_dev, ena_qid,
|
|
|
|
&ring->ena_com_io_sq,
|
|
|
|
&ring->ena_com_io_cq);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (rc != 0) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Failed to get TX queue handlers. TX queue num"
|
|
|
|
" %d rc: %d\n", i, rc);
|
|
|
|
ena_com_destroy_io_queue(ena_dev, ena_qid);
|
|
|
|
goto err_tx;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Create RX queues */
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
msix_vector = ENA_IO_IRQ_IDX(i);
|
|
|
|
ena_qid = ENA_IO_RXQ_IDX(i);
|
|
|
|
ctx.mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
|
|
|
|
ctx.direction = ENA_COM_IO_QUEUE_DIRECTION_RX;
|
|
|
|
ctx.queue_size = adapter->rx_ring_size;
|
|
|
|
ctx.msix_vector = msix_vector;
|
|
|
|
ctx.qid = ena_qid;
|
|
|
|
rc = ena_com_create_io_queue(ena_dev, &ctx);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Failed to create io RX queue[%d] rc: %d\n", i, rc);
|
|
|
|
goto err_rx;
|
|
|
|
}
|
|
|
|
|
|
|
|
ring = &adapter->rx_ring[i];
|
|
|
|
rc = ena_com_get_io_handlers(ena_dev, ena_qid,
|
|
|
|
&ring->ena_com_io_sq,
|
|
|
|
&ring->ena_com_io_cq);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Failed to get RX queue handlers. RX queue num"
|
|
|
|
" %d rc: %d\n", i, rc);
|
|
|
|
ena_com_destroy_io_queue(ena_dev, ena_qid);
|
|
|
|
goto err_rx;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
err_rx:
|
|
|
|
while (i--)
|
|
|
|
ena_com_destroy_io_queue(ena_dev, ENA_IO_RXQ_IDX(i));
|
|
|
|
i = adapter->num_queues;
|
|
|
|
err_tx:
|
|
|
|
while (i--)
|
|
|
|
ena_com_destroy_io_queue(ena_dev, ENA_IO_TXQ_IDX(i));
|
|
|
|
|
|
|
|
return (ENXIO);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_tx_cleanup - clear sent packets and corresponding descriptors
|
|
|
|
* @tx_ring: ring for which we want to clean packets
|
|
|
|
*
|
|
|
|
* Once packets are sent, we ask the device in a loop for no longer used
|
|
|
|
* descriptors. We find the related mbuf chain in a map (index in an array)
|
|
|
|
* and free it, then update ring state.
|
|
|
|
* This is performed in "endless" loop, updating ring pointers every
|
|
|
|
* TX_COMMIT. The first check of free descriptor is performed before the actual
|
|
|
|
* loop, then repeated at the loop end.
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_tx_cleanup(struct ena_ring *tx_ring)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter;
|
|
|
|
struct ena_com_io_cq* io_cq;
|
|
|
|
uint16_t next_to_clean;
|
|
|
|
uint16_t req_id;
|
|
|
|
uint16_t ena_qid;
|
|
|
|
unsigned int total_done = 0;
|
|
|
|
int rc;
|
|
|
|
int commit = TX_COMMIT;
|
|
|
|
int budget = TX_BUDGET;
|
|
|
|
int work_done;
|
|
|
|
|
|
|
|
adapter = tx_ring->que->adapter;
|
|
|
|
ena_qid = ENA_IO_TXQ_IDX(tx_ring->que->id);
|
|
|
|
io_cq = &adapter->ena_dev->io_cq_queues[ena_qid];
|
|
|
|
next_to_clean = tx_ring->next_to_clean;
|
|
|
|
|
|
|
|
do {
|
|
|
|
struct ena_tx_buffer *tx_info;
|
|
|
|
struct mbuf *mbuf;
|
|
|
|
|
|
|
|
rc = ena_com_tx_comp_req_id_get(io_cq, &req_id);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
rc = validate_tx_req_id(tx_ring, req_id);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
tx_info = &tx_ring->tx_buffer_info[req_id];
|
|
|
|
|
|
|
|
mbuf = tx_info->mbuf;
|
|
|
|
|
|
|
|
tx_info->mbuf = NULL;
|
|
|
|
bintime_clear(&tx_info->timestamp);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(tx_info->num_of_bufs != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* Map is no longer required */
|
|
|
|
bus_dmamap_unload(adapter->tx_buf_tag, tx_info->map);
|
|
|
|
}
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_DBG | ENA_TXPTH, "tx: q %d mbuf %p completed",
|
|
|
|
tx_ring->qid, mbuf);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
m_freem(mbuf);
|
|
|
|
|
|
|
|
total_done += tx_info->tx_descs;
|
|
|
|
|
|
|
|
tx_ring->free_tx_ids[next_to_clean] = req_id;
|
|
|
|
next_to_clean = ENA_TX_RING_IDX_NEXT(next_to_clean,
|
|
|
|
tx_ring->ring_size);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(--commit == 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
commit = TX_COMMIT;
|
|
|
|
/* update ring state every TX_COMMIT descriptor */
|
|
|
|
tx_ring->next_to_clean = next_to_clean;
|
2017-11-09 11:57:02 +00:00
|
|
|
ena_com_comp_ack(
|
|
|
|
&adapter->ena_dev->io_sq_queues[ena_qid],
|
|
|
|
total_done);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_com_update_dev_comp_head(io_cq);
|
|
|
|
total_done = 0;
|
|
|
|
}
|
2017-11-09 11:59:21 +00:00
|
|
|
} while (likely(--budget));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
work_done = TX_BUDGET - budget;
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_DBG | ENA_TXPTH, "tx: q %d done. total pkts: %d",
|
|
|
|
tx_ring->qid, work_done);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* If there is still something to commit update ring state */
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(commit != TX_COMMIT)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
tx_ring->next_to_clean = next_to_clean;
|
2017-11-09 11:57:02 +00:00
|
|
|
ena_com_comp_ack(&adapter->ena_dev->io_sq_queues[ena_qid],
|
|
|
|
total_done);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_com_update_dev_comp_head(io_cq);
|
|
|
|
}
|
|
|
|
|
|
|
|
taskqueue_enqueue(tx_ring->enqueue_tq, &tx_ring->enqueue_task);
|
|
|
|
|
|
|
|
return (work_done);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_rx_hash_mbuf(struct ena_ring *rx_ring, struct ena_com_rx_ctx *ena_rx_ctx,
|
|
|
|
struct mbuf *mbuf)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = rx_ring->adapter;
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(adapter->rss_support)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
mbuf->m_pkthdr.flowid = ena_rx_ctx->hash;
|
|
|
|
|
|
|
|
if (ena_rx_ctx->frag &&
|
2017-11-09 12:39:26 +00:00
|
|
|
(ena_rx_ctx->l3_proto != ENA_ETH_IO_L3_PROTO_UNKNOWN)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_OPAQUE_HASH);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (ena_rx_ctx->l3_proto) {
|
|
|
|
case ENA_ETH_IO_L3_PROTO_IPV4:
|
|
|
|
switch (ena_rx_ctx->l4_proto) {
|
|
|
|
case ENA_ETH_IO_L4_PROTO_TCP:
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_TCP_IPV4);
|
|
|
|
break;
|
|
|
|
case ENA_ETH_IO_L4_PROTO_UDP:
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_UDP_IPV4);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_IPV4);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case ENA_ETH_IO_L3_PROTO_IPV6:
|
|
|
|
switch (ena_rx_ctx->l4_proto) {
|
|
|
|
case ENA_ETH_IO_L4_PROTO_TCP:
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_TCP_IPV6);
|
|
|
|
break;
|
|
|
|
case ENA_ETH_IO_L4_PROTO_UDP:
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_UDP_IPV6);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_IPV6);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case ENA_ETH_IO_L3_PROTO_UNKNOWN:
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_NONE);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_OPAQUE_HASH);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
mbuf->m_pkthdr.flowid = rx_ring->qid;
|
|
|
|
M_HASHTYPE_SET(mbuf, M_HASHTYPE_NONE);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_rx_mbuf - assemble mbuf from descriptors
|
|
|
|
* @rx_ring: ring for which we want to clean packets
|
|
|
|
* @ena_bufs: buffer info
|
|
|
|
* @ena_rx_ctx: metadata for this packet(s)
|
2017-11-09 11:45:59 +00:00
|
|
|
* @next_to_clean: ring pointer, will be updated only upon success
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
*
|
|
|
|
**/
|
|
|
|
static struct mbuf*
|
|
|
|
ena_rx_mbuf(struct ena_ring *rx_ring, struct ena_com_rx_buf_info *ena_bufs,
|
|
|
|
struct ena_com_rx_ctx *ena_rx_ctx, uint16_t *next_to_clean)
|
|
|
|
{
|
|
|
|
struct mbuf *mbuf;
|
|
|
|
struct ena_rx_buffer *rx_info;
|
|
|
|
struct ena_adapter *adapter;
|
|
|
|
unsigned int descs = ena_rx_ctx->descs;
|
2019-02-15 10:34:27 +00:00
|
|
|
int rc;
|
2017-11-09 11:45:59 +00:00
|
|
|
uint16_t ntc, len, req_id, buf = 0;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
ntc = *next_to_clean;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter = rx_ring->adapter;
|
2017-11-09 11:45:59 +00:00
|
|
|
|
|
|
|
len = ena_bufs[buf].len;
|
|
|
|
req_id = ena_bufs[buf].req_id;
|
2019-02-15 10:34:27 +00:00
|
|
|
rc = validate_rx_req_id(rx_ring, req_id);
|
|
|
|
if (unlikely(rc != 0))
|
|
|
|
return (NULL);
|
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
rx_info = &rx_ring->rx_buffer_info[req_id];
|
2019-02-15 10:40:41 +00:00
|
|
|
if (unlikely(rx_info->mbuf == NULL)) {
|
|
|
|
device_printf(adapter->pdev, "NULL mbuf in rx_info");
|
|
|
|
return (NULL);
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
ena_trace(ENA_DBG | ENA_RXPTH, "rx_info %p, mbuf %p, paddr %jx",
|
|
|
|
rx_info, rx_info->mbuf, (uintmax_t)rx_info->ena_buf.paddr);
|
|
|
|
|
|
|
|
mbuf = rx_info->mbuf;
|
|
|
|
mbuf->m_flags |= M_PKTHDR;
|
|
|
|
mbuf->m_pkthdr.len = len;
|
|
|
|
mbuf->m_len = len;
|
|
|
|
mbuf->m_pkthdr.rcvif = rx_ring->que->adapter->ifp;
|
|
|
|
|
|
|
|
/* Fill mbuf with hash key and it's interpretation for optimization */
|
|
|
|
ena_rx_hash_mbuf(rx_ring, ena_rx_ctx, mbuf);
|
|
|
|
|
|
|
|
ena_trace(ENA_DBG | ENA_RXPTH, "rx mbuf 0x%p, flags=0x%x, len: %d",
|
|
|
|
mbuf, mbuf->m_flags, mbuf->m_pkthdr.len);
|
|
|
|
|
|
|
|
/* DMA address is not needed anymore, unmap it */
|
|
|
|
bus_dmamap_unload(rx_ring->adapter->rx_buf_tag, rx_info->map);
|
|
|
|
|
|
|
|
rx_info->mbuf = NULL;
|
2017-11-09 11:45:59 +00:00
|
|
|
rx_ring->free_rx_ids[ntc] = req_id;
|
|
|
|
ntc = ENA_RX_RING_IDX_NEXT(ntc, rx_ring->ring_size);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* While we have more than 1 descriptors for one rcvd packet, append
|
|
|
|
* other mbufs to the main one
|
|
|
|
*/
|
|
|
|
while (--descs) {
|
2017-11-09 11:45:59 +00:00
|
|
|
++buf;
|
|
|
|
len = ena_bufs[buf].len;
|
|
|
|
req_id = ena_bufs[buf].req_id;
|
2019-02-15 10:34:27 +00:00
|
|
|
rc = validate_rx_req_id(rx_ring, req_id);
|
|
|
|
if (unlikely(rc != 0)) {
|
|
|
|
/*
|
|
|
|
* If the req_id is invalid, then the device will be
|
|
|
|
* reset. In that case we must free all mbufs that
|
|
|
|
* were already gathered.
|
|
|
|
*/
|
|
|
|
m_freem(mbuf);
|
|
|
|
return (NULL);
|
|
|
|
}
|
2017-11-09 11:45:59 +00:00
|
|
|
rx_info = &rx_ring->rx_buffer_info[req_id];
|
|
|
|
|
|
|
|
if (unlikely(rx_info->mbuf == NULL)) {
|
|
|
|
device_printf(adapter->pdev, "NULL mbuf in rx_info");
|
|
|
|
/*
|
|
|
|
* If one of the required mbufs was not allocated yet,
|
|
|
|
* we can break there.
|
|
|
|
* All earlier used descriptors will be reallocated
|
|
|
|
* later and not used mbufs can be reused.
|
|
|
|
* The next_to_clean pointer will not be updated in case
|
|
|
|
* of an error, so caller should advance it manually
|
|
|
|
* in error handling routine to keep it up to date
|
|
|
|
* with hw ring.
|
|
|
|
*/
|
|
|
|
m_freem(mbuf);
|
|
|
|
return (NULL);
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(m_append(mbuf, len, rx_info->mbuf->m_data) == 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
counter_u64_add(rx_ring->rx_stats.mbuf_alloc_fail, 1);
|
|
|
|
ena_trace(ENA_WARNING, "Failed to append Rx mbuf %p",
|
|
|
|
mbuf);
|
|
|
|
}
|
2017-11-09 13:30:39 +00:00
|
|
|
|
|
|
|
ena_trace(ENA_DBG | ENA_RXPTH,
|
|
|
|
"rx mbuf updated. len %d", mbuf->m_pkthdr.len);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* Free already appended mbuf, it won't be useful anymore */
|
|
|
|
bus_dmamap_unload(rx_ring->adapter->rx_buf_tag, rx_info->map);
|
|
|
|
m_freem(rx_info->mbuf);
|
|
|
|
rx_info->mbuf = NULL;
|
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
rx_ring->free_rx_ids[ntc] = req_id;
|
|
|
|
ntc = ENA_RX_RING_IDX_NEXT(ntc, rx_ring->ring_size);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
2017-11-09 11:45:59 +00:00
|
|
|
*next_to_clean = ntc;
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (mbuf);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_rx_checksum - indicate in mbuf if hw indicated a good cksum
|
|
|
|
**/
|
|
|
|
static inline void
|
|
|
|
ena_rx_checksum(struct ena_ring *rx_ring, struct ena_com_rx_ctx *ena_rx_ctx,
|
|
|
|
struct mbuf *mbuf)
|
|
|
|
{
|
|
|
|
|
|
|
|
/* if IP and error */
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((ena_rx_ctx->l3_proto == ENA_ETH_IO_L3_PROTO_IPV4) &&
|
|
|
|
ena_rx_ctx->l3_csum_err)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* ipv4 checksum error */
|
|
|
|
mbuf->m_pkthdr.csum_flags = 0;
|
|
|
|
counter_u64_add(rx_ring->rx_stats.bad_csum, 1);
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_DBG, "RX IPv4 header checksum error");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* if TCP/UDP */
|
|
|
|
if ((ena_rx_ctx->l4_proto == ENA_ETH_IO_L4_PROTO_TCP) ||
|
|
|
|
(ena_rx_ctx->l4_proto == ENA_ETH_IO_L4_PROTO_UDP)) {
|
|
|
|
if (ena_rx_ctx->l4_csum_err) {
|
|
|
|
/* TCP/UDP checksum error */
|
|
|
|
mbuf->m_pkthdr.csum_flags = 0;
|
|
|
|
counter_u64_add(rx_ring->rx_stats.bad_csum, 1);
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_DBG, "RX L4 checksum error");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
} else {
|
|
|
|
mbuf->m_pkthdr.csum_flags = CSUM_IP_CHECKED;
|
|
|
|
mbuf->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:48:22 +00:00
|
|
|
static void
|
|
|
|
ena_deferred_rx_cleanup(void *arg, int pending)
|
|
|
|
{
|
|
|
|
struct ena_ring *rx_ring = arg;
|
|
|
|
int budget = CLEAN_BUDGET;
|
|
|
|
|
|
|
|
ENA_RING_MTX_LOCK(rx_ring);
|
|
|
|
/*
|
|
|
|
* If deferred task was executed, perform cleanup of all awaiting
|
|
|
|
* descs (or until given budget is depleted to avoid infinite loop).
|
|
|
|
*/
|
2017-11-09 11:59:21 +00:00
|
|
|
while (likely(budget--)) {
|
2017-11-09 11:48:22 +00:00
|
|
|
if (ena_rx_cleanup(rx_ring) == 0)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
ENA_RING_MTX_UNLOCK(rx_ring);
|
|
|
|
}
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/**
|
|
|
|
* ena_rx_cleanup - handle rx irq
|
|
|
|
* @arg: ring for which irq is being handled
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_rx_cleanup(struct ena_ring *rx_ring)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter;
|
|
|
|
struct mbuf *mbuf;
|
|
|
|
struct ena_com_rx_ctx ena_rx_ctx;
|
|
|
|
struct ena_com_io_cq* io_cq;
|
|
|
|
struct ena_com_io_sq* io_sq;
|
|
|
|
if_t ifp;
|
|
|
|
uint16_t ena_qid;
|
|
|
|
uint16_t next_to_clean;
|
|
|
|
uint32_t refill_required;
|
|
|
|
uint32_t refill_threshold;
|
|
|
|
uint32_t do_if_input = 0;
|
|
|
|
unsigned int qid;
|
2017-11-09 11:45:59 +00:00
|
|
|
int rc, i;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
int budget = RX_BUDGET;
|
|
|
|
|
|
|
|
adapter = rx_ring->que->adapter;
|
|
|
|
ifp = adapter->ifp;
|
|
|
|
qid = rx_ring->que->id;
|
|
|
|
ena_qid = ENA_IO_RXQ_IDX(qid);
|
|
|
|
io_cq = &adapter->ena_dev->io_cq_queues[ena_qid];
|
|
|
|
io_sq = &adapter->ena_dev->io_sq_queues[ena_qid];
|
|
|
|
next_to_clean = rx_ring->next_to_clean;
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_DBG, "rx: qid %d", qid);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
do {
|
|
|
|
ena_rx_ctx.ena_bufs = rx_ring->ena_bufs;
|
|
|
|
ena_rx_ctx.max_bufs = adapter->max_rx_sgl_size;
|
|
|
|
ena_rx_ctx.descs = 0;
|
|
|
|
rc = ena_com_rx_pkt(io_cq, io_sq, &ena_rx_ctx);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely(rc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
goto error;
|
|
|
|
|
|
|
|
if (unlikely(ena_rx_ctx.descs == 0))
|
|
|
|
break;
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_DBG | ENA_RXPTH, "rx: q %d got packet from ena. "
|
|
|
|
"descs #: %d l3 proto %d l4 proto %d hash: %x",
|
|
|
|
rx_ring->qid, ena_rx_ctx.descs, ena_rx_ctx.l3_proto,
|
|
|
|
ena_rx_ctx.l4_proto, ena_rx_ctx.hash);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* Receive mbuf from the ring */
|
|
|
|
mbuf = ena_rx_mbuf(rx_ring, rx_ring->ena_bufs,
|
|
|
|
&ena_rx_ctx, &next_to_clean);
|
|
|
|
|
|
|
|
/* Exit if we failed to retrieve a buffer */
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely(mbuf == NULL)) {
|
2017-11-09 11:45:59 +00:00
|
|
|
for (i = 0; i < ena_rx_ctx.descs; ++i) {
|
|
|
|
rx_ring->free_rx_ids[next_to_clean] =
|
|
|
|
rx_ring->ena_bufs[i].req_id;
|
|
|
|
next_to_clean =
|
|
|
|
ENA_RX_RING_IDX_NEXT(next_to_clean,
|
|
|
|
rx_ring->ring_size);
|
|
|
|
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if (((ifp->if_capenable & IFCAP_RXCSUM) != 0) ||
|
|
|
|
((ifp->if_capenable & IFCAP_RXCSUM_IPV6) != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_rx_checksum(rx_ring, &ena_rx_ctx, mbuf);
|
|
|
|
}
|
|
|
|
|
2017-10-31 16:31:23 +00:00
|
|
|
counter_enter();
|
|
|
|
counter_u64_add_protected(rx_ring->rx_stats.bytes,
|
|
|
|
mbuf->m_pkthdr.len);
|
|
|
|
counter_u64_add_protected(adapter->hw_stats.rx_bytes,
|
|
|
|
mbuf->m_pkthdr.len);
|
|
|
|
counter_exit();
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/*
|
|
|
|
* LRO is only for IP/TCP packets and TCP checksum of the packet
|
|
|
|
* should be computed by hardware.
|
|
|
|
*/
|
|
|
|
do_if_input = 1;
|
2017-11-09 11:57:02 +00:00
|
|
|
if (((ifp->if_capenable & IFCAP_LRO) != 0) &&
|
|
|
|
((mbuf->m_pkthdr.csum_flags & CSUM_IP_VALID) != 0) &&
|
|
|
|
(ena_rx_ctx.l4_proto == ENA_ETH_IO_L4_PROTO_TCP)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/*
|
|
|
|
* Send to the stack if:
|
|
|
|
* - LRO not enabled, or
|
|
|
|
* - no LRO resources, or
|
|
|
|
* - lro enqueue fails
|
|
|
|
*/
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((rx_ring->lro.lro_cnt != 0) &&
|
|
|
|
(tcp_lro_rx(&rx_ring->lro, mbuf, 0) == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
do_if_input = 0;
|
|
|
|
}
|
2017-11-09 11:57:02 +00:00
|
|
|
if (do_if_input != 0) {
|
|
|
|
ena_trace(ENA_DBG | ENA_RXPTH,
|
|
|
|
"calling if_input() with mbuf %p", mbuf);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
(*ifp->if_input)(ifp, mbuf);
|
|
|
|
}
|
|
|
|
|
2017-10-31 16:31:23 +00:00
|
|
|
counter_enter();
|
|
|
|
counter_u64_add_protected(rx_ring->rx_stats.cnt, 1);
|
|
|
|
counter_u64_add_protected(adapter->hw_stats.rx_packets, 1);
|
|
|
|
counter_exit();
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
} while (--budget);
|
|
|
|
|
|
|
|
rx_ring->next_to_clean = next_to_clean;
|
|
|
|
|
2017-10-31 12:41:07 +00:00
|
|
|
refill_required = ena_com_free_desc(io_sq);
|
2017-11-09 12:07:02 +00:00
|
|
|
refill_threshold = rx_ring->ring_size / ENA_RX_REFILL_THRESH_DIVIDER;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
if (refill_required > refill_threshold) {
|
|
|
|
ena_com_update_dev_comp_head(rx_ring->ena_com_io_cq);
|
|
|
|
ena_refill_rx_bufs(rx_ring, refill_required);
|
|
|
|
}
|
|
|
|
|
|
|
|
tcp_lro_flush_all(&rx_ring->lro);
|
|
|
|
|
|
|
|
return (RX_BUDGET - budget);
|
|
|
|
|
|
|
|
error:
|
|
|
|
counter_u64_add(rx_ring->rx_stats.bad_desc_num, 1);
|
2019-05-30 13:13:15 +00:00
|
|
|
|
|
|
|
/* Too many desc from the device. Trigger reset */
|
|
|
|
adapter->reset_reason = ENA_REGS_RESET_TOO_MANY_RX_DESCS;
|
|
|
|
adapter->trigger_reset = true;
|
|
|
|
|
|
|
|
return (0);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*********************************************************************
|
|
|
|
*
|
|
|
|
* MSIX & Interrupt Service routine
|
|
|
|
*
|
|
|
|
**********************************************************************/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_handle_msix - MSIX Interrupt Handler for admin/async queue
|
|
|
|
* @arg: interrupt number
|
|
|
|
**/
|
|
|
|
static void
|
|
|
|
ena_intr_msix_mgmnt(void *arg)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = (struct ena_adapter *)arg;
|
|
|
|
|
|
|
|
ena_com_admin_q_comp_intr_handler(adapter->ena_dev);
|
|
|
|
if (likely(adapter->running))
|
|
|
|
ena_com_aenq_intr_handler(adapter->ena_dev, arg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_handle_msix - MSIX Interrupt Handler for Tx/Rx
|
|
|
|
* @arg: interrupt number
|
|
|
|
**/
|
|
|
|
static void
|
|
|
|
ena_handle_msix(void *arg)
|
|
|
|
{
|
|
|
|
struct ena_que *que = arg;
|
|
|
|
struct ena_adapter *adapter = que->adapter;
|
|
|
|
if_t ifp = adapter->ifp;
|
|
|
|
struct ena_ring *tx_ring;
|
|
|
|
struct ena_ring *rx_ring;
|
|
|
|
struct ena_com_io_cq* io_cq;
|
|
|
|
struct ena_eth_io_intr_reg intr_reg;
|
|
|
|
int qid, ena_qid;
|
|
|
|
int txc, rxc, i;
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
ena_trace(ENA_DBG, "MSI-X TX/RX routine");
|
|
|
|
|
|
|
|
tx_ring = que->tx_ring;
|
|
|
|
rx_ring = que->rx_ring;
|
|
|
|
qid = que->id;
|
|
|
|
ena_qid = ENA_IO_TXQ_IDX(qid);
|
|
|
|
io_cq = &adapter->ena_dev->io_cq_queues[ena_qid];
|
|
|
|
|
|
|
|
for (i = 0; i < CLEAN_BUDGET; ++i) {
|
2017-11-09 11:48:22 +00:00
|
|
|
/*
|
|
|
|
* If lock cannot be acquired, then deferred cleanup task was
|
|
|
|
* being executed and rx ring is being cleaned up in
|
|
|
|
* another thread.
|
|
|
|
*/
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(ENA_RING_MTX_TRYLOCK(rx_ring) != 0)) {
|
2017-11-09 11:48:22 +00:00
|
|
|
rxc = ena_rx_cleanup(rx_ring);
|
|
|
|
ENA_RING_MTX_UNLOCK(rx_ring);
|
|
|
|
} else {
|
|
|
|
rxc = 0;
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* Protection from calling ena_tx_cleanup from ena_start_xmit */
|
|
|
|
ENA_RING_MTX_LOCK(tx_ring);
|
|
|
|
txc = ena_tx_cleanup(tx_ring);
|
|
|
|
ENA_RING_MTX_UNLOCK(tx_ring);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((txc != TX_BUDGET) && (rxc != RX_BUDGET))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Signal that work is done and unmask interrupt */
|
|
|
|
ena_com_update_intr_reg(&intr_reg,
|
|
|
|
RX_IRQ_INTERVAL,
|
|
|
|
TX_IRQ_INTERVAL,
|
|
|
|
true);
|
|
|
|
ena_com_unmask_intr(io_cq, &intr_reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_enable_msix(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
device_t dev = adapter->pdev;
|
2017-11-09 12:03:06 +00:00
|
|
|
int msix_vecs, msix_req;
|
|
|
|
int i, rc = 0;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* Reserved the max msix vectors we might need */
|
|
|
|
msix_vecs = ENA_MAX_MSIX_VEC(adapter->num_queues);
|
|
|
|
|
2017-11-07 13:20:41 +00:00
|
|
|
adapter->msix_entries = malloc(msix_vecs * sizeof(struct msix_entry),
|
|
|
|
M_DEVBUF, M_WAITOK | M_ZERO);
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_DBG, "trying to enable MSI-X, vectors: %d", msix_vecs);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
for (i = 0; i < msix_vecs; i++) {
|
|
|
|
adapter->msix_entries[i].entry = i;
|
|
|
|
/* Vectors must start from 1 */
|
|
|
|
adapter->msix_entries[i].vector = i + 1;
|
|
|
|
}
|
|
|
|
|
2017-11-09 12:03:06 +00:00
|
|
|
msix_req = msix_vecs;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rc = pci_alloc_msix(dev, &msix_vecs);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(dev,
|
|
|
|
"Failed to enable MSIX, vectors %d rc %d\n", msix_vecs, rc);
|
2017-11-09 11:54:32 +00:00
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rc = ENOSPC;
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_msix_free;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
2017-11-09 12:03:06 +00:00
|
|
|
if (msix_vecs != msix_req) {
|
|
|
|
device_printf(dev, "Enable only %d MSI-x (out of %d), reduce "
|
|
|
|
"the number of queues\n", msix_vecs, msix_req);
|
|
|
|
adapter->num_queues = msix_vecs - ENA_ADMIN_MSIX_VEC;
|
|
|
|
}
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->msix_vecs = msix_vecs;
|
|
|
|
adapter->msix_enabled = true;
|
|
|
|
|
2017-11-09 11:54:32 +00:00
|
|
|
return (0);
|
|
|
|
|
|
|
|
err_msix_free:
|
|
|
|
free(adapter->msix_entries, M_DEVBUF);
|
|
|
|
adapter->msix_entries = NULL;
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_setup_mgmnt_intr(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
|
|
|
|
snprintf(adapter->irq_tbl[ENA_MGMNT_IRQ_IDX].name,
|
|
|
|
ENA_IRQNAME_SIZE, "ena-mgmnt@pci:%s",
|
|
|
|
device_get_nameunit(adapter->pdev));
|
|
|
|
/*
|
|
|
|
* Handler is NULL on purpose, it will be set
|
|
|
|
* when mgmnt interrupt is acquired
|
|
|
|
*/
|
|
|
|
adapter->irq_tbl[ENA_MGMNT_IRQ_IDX].handler = NULL;
|
|
|
|
adapter->irq_tbl[ENA_MGMNT_IRQ_IDX].data = adapter;
|
|
|
|
adapter->irq_tbl[ENA_MGMNT_IRQ_IDX].vector =
|
|
|
|
adapter->msix_entries[ENA_MGMNT_IRQ_IDX].vector;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_setup_io_intr(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
static int last_bind_cpu = -1;
|
|
|
|
int irq_idx;
|
|
|
|
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
|
|
irq_idx = ENA_IO_IRQ_IDX(i);
|
|
|
|
|
|
|
|
snprintf(adapter->irq_tbl[irq_idx].name, ENA_IRQNAME_SIZE,
|
|
|
|
"%s-TxRx-%d", device_get_nameunit(adapter->pdev), i);
|
|
|
|
adapter->irq_tbl[irq_idx].handler = ena_handle_msix;
|
|
|
|
adapter->irq_tbl[irq_idx].data = &adapter->que[i];
|
|
|
|
adapter->irq_tbl[irq_idx].vector =
|
|
|
|
adapter->msix_entries[irq_idx].vector;
|
|
|
|
ena_trace(ENA_INFO | ENA_IOQ, "ena_setup_io_intr vector: %d\n",
|
|
|
|
adapter->msix_entries[irq_idx].vector);
|
2019-05-30 13:12:14 +00:00
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/*
|
2019-05-30 13:12:14 +00:00
|
|
|
* We want to bind rings to the corresponding cpu
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
* using something similar to the RSS round-robin technique.
|
|
|
|
*/
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(last_bind_cpu < 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
last_bind_cpu = CPU_FIRST();
|
|
|
|
adapter->que[i].cpu = adapter->irq_tbl[irq_idx].cpu =
|
|
|
|
last_bind_cpu;
|
|
|
|
last_bind_cpu = CPU_NEXT(last_bind_cpu);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_request_mgmnt_irq(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_irq *irq;
|
|
|
|
unsigned long flags;
|
|
|
|
int rc, rcc;
|
|
|
|
|
|
|
|
flags = RF_ACTIVE | RF_SHAREABLE;
|
|
|
|
|
|
|
|
irq = &adapter->irq_tbl[ENA_MGMNT_IRQ_IDX];
|
|
|
|
irq->res = bus_alloc_resource_any(adapter->pdev, SYS_RES_IRQ,
|
|
|
|
&irq->vector, flags);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(irq->res == NULL)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "could not allocate "
|
|
|
|
"irq vector: %d\n", irq->vector);
|
2017-11-09 11:54:32 +00:00
|
|
|
return (ENXIO);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
rc = bus_setup_intr(adapter->pdev, irq->res,
|
|
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL, ena_intr_msix_mgmnt,
|
|
|
|
irq->data, &irq->cookie);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "failed to register "
|
|
|
|
"interrupt handler for irq %ju: %d\n",
|
|
|
|
rman_get_start(irq->res), rc);
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_res_free;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
irq->requested = true;
|
|
|
|
|
|
|
|
return (rc);
|
|
|
|
|
2017-11-09 11:54:32 +00:00
|
|
|
err_res_free:
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_INFO | ENA_ADMQ, "releasing resource for irq %d\n",
|
2017-11-09 11:54:32 +00:00
|
|
|
irq->vector);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rcc = bus_release_resource(adapter->pdev, SYS_RES_IRQ,
|
|
|
|
irq->vector, irq->res);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rcc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "dev has no parent while "
|
|
|
|
"releasing res for irq: %d\n", irq->vector);
|
|
|
|
irq->res = NULL;
|
|
|
|
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_request_io_irq(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_irq *irq;
|
|
|
|
unsigned long flags = 0;
|
|
|
|
int rc = 0, i, rcc;
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(adapter->msix_enabled == 0)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"failed to request I/O IRQ: MSI-X is not enabled\n");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (EINVAL);
|
|
|
|
} else {
|
|
|
|
flags = RF_ACTIVE | RF_SHAREABLE;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = ENA_IO_IRQ_FIRST_IDX; i < adapter->msix_vecs; i++) {
|
|
|
|
irq = &adapter->irq_tbl[i];
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(irq->requested))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
continue;
|
|
|
|
|
|
|
|
irq->res = bus_alloc_resource_any(adapter->pdev, SYS_RES_IRQ,
|
|
|
|
&irq->vector, flags);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(irq->res == NULL)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "could not allocate "
|
|
|
|
"irq vector: %d\n", irq->vector);
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
rc = bus_setup_intr(adapter->pdev, irq->res,
|
|
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
|
|
irq->handler, irq->data, &irq->cookie);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "failed to register "
|
|
|
|
"interrupt handler for irq %ju: %d\n",
|
|
|
|
rman_get_start(irq->res), rc);
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
irq->requested = true;
|
|
|
|
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_INFO, "queue %d - cpu %d\n",
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
i - ENA_IO_IRQ_FIRST_IDX, irq->cpu);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (rc);
|
|
|
|
|
|
|
|
err:
|
|
|
|
|
|
|
|
for (; i >= ENA_IO_IRQ_FIRST_IDX; i--) {
|
|
|
|
irq = &adapter->irq_tbl[i];
|
|
|
|
rcc = 0;
|
|
|
|
|
|
|
|
/* Once we entered err: section and irq->requested is true we
|
|
|
|
free both intr and resources */
|
2017-11-09 11:57:02 +00:00
|
|
|
if (irq->requested)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rcc = bus_teardown_intr(adapter->pdev, irq->res, irq->cookie);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rcc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "could not release"
|
|
|
|
" irq: %d, error: %d\n", irq->vector, rcc);
|
|
|
|
|
|
|
|
/* If we entred err: section without irq->requested set we know
|
|
|
|
it was bus_alloc_resource_any() that needs cleanup, provided
|
|
|
|
res is not NULL. In case res is NULL no work in needed in
|
|
|
|
this iteration */
|
|
|
|
rcc = 0;
|
|
|
|
if (irq->res != NULL) {
|
|
|
|
rcc = bus_release_resource(adapter->pdev, SYS_RES_IRQ,
|
|
|
|
irq->vector, irq->res);
|
|
|
|
}
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rcc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "dev has no parent while "
|
|
|
|
"releasing res for irq: %d\n", irq->vector);
|
|
|
|
irq->requested = false;
|
|
|
|
irq->res = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_mgmnt_irq(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_irq *irq;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
irq = &adapter->irq_tbl[ENA_MGMNT_IRQ_IDX];
|
|
|
|
if (irq->requested) {
|
|
|
|
ena_trace(ENA_INFO | ENA_ADMQ, "tear down irq: %d\n",
|
|
|
|
irq->vector);
|
|
|
|
rc = bus_teardown_intr(adapter->pdev, irq->res, irq->cookie);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "failed to tear "
|
|
|
|
"down irq: %d\n", irq->vector);
|
|
|
|
irq->requested = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (irq->res != NULL) {
|
|
|
|
ena_trace(ENA_INFO | ENA_ADMQ, "release resource irq: %d\n",
|
|
|
|
irq->vector);
|
|
|
|
rc = bus_release_resource(adapter->pdev, SYS_RES_IRQ,
|
|
|
|
irq->vector, irq->res);
|
|
|
|
irq->res = NULL;
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "dev has no parent while "
|
|
|
|
"releasing res for irq: %d\n", irq->vector);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_io_irq(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_irq *irq;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
for (int i = ENA_IO_IRQ_FIRST_IDX; i < adapter->msix_vecs; i++) {
|
|
|
|
irq = &adapter->irq_tbl[i];
|
|
|
|
if (irq->requested) {
|
|
|
|
ena_trace(ENA_INFO | ENA_IOQ, "tear down irq: %d\n",
|
|
|
|
irq->vector);
|
|
|
|
rc = bus_teardown_intr(adapter->pdev, irq->res,
|
|
|
|
irq->cookie);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "failed to tear "
|
|
|
|
"down irq: %d\n", irq->vector);
|
|
|
|
}
|
|
|
|
irq->requested = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (irq->res != NULL) {
|
|
|
|
ena_trace(ENA_INFO | ENA_IOQ, "release resource irq: %d\n",
|
|
|
|
irq->vector);
|
|
|
|
rc = bus_release_resource(adapter->pdev, SYS_RES_IRQ,
|
|
|
|
irq->vector, irq->res);
|
|
|
|
irq->res = NULL;
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "dev has no parent"
|
|
|
|
" while releasing res for irq: %d\n",
|
|
|
|
irq->vector);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_free_irqs(struct ena_adapter* adapter)
|
|
|
|
{
|
|
|
|
|
|
|
|
ena_free_io_irq(adapter);
|
|
|
|
ena_free_mgmnt_irq(adapter);
|
|
|
|
ena_disable_msix(adapter);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_disable_msix(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
|
|
|
|
pci_release_msi(adapter->pdev);
|
|
|
|
|
|
|
|
adapter->msix_vecs = 0;
|
2017-11-07 13:20:41 +00:00
|
|
|
free(adapter->msix_entries, M_DEVBUF);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->msix_entries = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_unmask_all_io_irqs(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_com_io_cq* io_cq;
|
|
|
|
struct ena_eth_io_intr_reg intr_reg;
|
|
|
|
uint16_t ena_qid;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Unmask interrupts for all queues */
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
ena_qid = ENA_IO_TXQ_IDX(i);
|
|
|
|
io_cq = &adapter->ena_dev->io_cq_queues[ena_qid];
|
|
|
|
ena_com_update_intr_reg(&intr_reg, 0, 0, true);
|
|
|
|
ena_com_unmask_intr(io_cq, &intr_reg);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Configure the Rx forwarding */
|
2017-11-09 11:57:02 +00:00
|
|
|
static int
|
|
|
|
ena_rss_configure(struct ena_adapter *adapter)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
{
|
|
|
|
struct ena_com_dev *ena_dev = adapter->ena_dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* Set indirect table */
|
|
|
|
rc = ena_com_indirect_table_set(ena_dev);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely((rc != 0) && (rc != EOPNOTSUPP)))
|
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* Configure hash function (if supported) */
|
|
|
|
rc = ena_com_set_hash_function(ena_dev);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely((rc != 0) && (rc != EOPNOTSUPP)))
|
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* Configure hash inputs (if supported) */
|
|
|
|
rc = ena_com_set_hash_ctrl(ena_dev);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely((rc != 0) && (rc != EOPNOTSUPP)))
|
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
return (0);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_up_complete(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(adapter->rss_support)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rc = ena_rss_configure(adapter);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (rc != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:54:32 +00:00
|
|
|
rc = ena_change_mtu(adapter->ifp, adapter->ifp->if_mtu);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
2017-11-09 11:54:32 +00:00
|
|
|
return (rc);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_refill_all_rx_bufs(adapter);
|
2017-10-31 16:31:23 +00:00
|
|
|
ena_reset_counters((counter_u64_t *)&adapter->hw_stats,
|
|
|
|
sizeof(adapter->hw_stats));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_up(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
int rc = 0;
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(device_is_attached(adapter->pdev) == 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "device is not attached!\n");
|
|
|
|
return (ENXIO);
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(!adapter->running)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "device is not running!\n");
|
|
|
|
return (ENXIO);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!adapter->up) {
|
|
|
|
device_printf(adapter->pdev, "device is going UP\n");
|
|
|
|
|
|
|
|
/* setup interrupts for IO queues */
|
|
|
|
ena_setup_io_intr(adapter);
|
|
|
|
rc = ena_request_io_irq(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_trace(ENA_ALERT, "err_req_irq");
|
|
|
|
goto err_req_irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* allocate transmit descriptors */
|
|
|
|
rc = ena_setup_all_tx_resources(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_trace(ENA_ALERT, "err_setup_tx");
|
|
|
|
goto err_setup_tx;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* allocate receive descriptors */
|
|
|
|
rc = ena_setup_all_rx_resources(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_trace(ENA_ALERT, "err_setup_rx");
|
|
|
|
goto err_setup_rx;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* create IO queues for Rx & Tx */
|
|
|
|
rc = ena_create_io_queues(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_trace(ENA_ALERT,
|
|
|
|
"create IO queues failed");
|
|
|
|
goto err_io_que;
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(adapter->link_status))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
if_link_state_change(adapter->ifp, LINK_STATE_UP);
|
|
|
|
|
|
|
|
rc = ena_up_complete(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
goto err_up_complete;
|
|
|
|
|
|
|
|
counter_u64_add(adapter->dev_stats.interface_up, 1);
|
|
|
|
|
|
|
|
ena_update_hwassist(adapter);
|
|
|
|
|
|
|
|
if_setdrvflagbits(adapter->ifp, IFF_DRV_RUNNING,
|
|
|
|
IFF_DRV_OACTIVE);
|
|
|
|
|
|
|
|
callout_reset_sbt(&adapter->timer_service, SBT_1S, SBT_1S,
|
|
|
|
ena_timer_service, (void *)adapter, 0);
|
|
|
|
|
|
|
|
adapter->up = true;
|
2017-07-04 00:02:28 +00:00
|
|
|
|
|
|
|
ena_unmask_all_io_irqs(adapter);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
err_up_complete:
|
|
|
|
ena_destroy_all_io_queues(adapter);
|
|
|
|
err_io_que:
|
|
|
|
ena_free_all_rx_resources(adapter);
|
|
|
|
err_setup_rx:
|
|
|
|
ena_free_all_tx_resources(adapter);
|
|
|
|
err_setup_tx:
|
|
|
|
ena_free_io_irq(adapter);
|
|
|
|
err_req_irq:
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint64_t
|
|
|
|
ena_get_counter(if_t ifp, ift_counter cnt)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter;
|
|
|
|
struct ena_hw_stats *stats;
|
|
|
|
|
|
|
|
adapter = if_getsoftc(ifp);
|
|
|
|
stats = &adapter->hw_stats;
|
|
|
|
|
|
|
|
switch (cnt) {
|
|
|
|
case IFCOUNTER_IPACKETS:
|
2017-10-31 16:31:23 +00:00
|
|
|
return (counter_u64_fetch(stats->rx_packets));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
case IFCOUNTER_OPACKETS:
|
2017-10-31 16:31:23 +00:00
|
|
|
return (counter_u64_fetch(stats->tx_packets));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
case IFCOUNTER_IBYTES:
|
2017-10-31 16:31:23 +00:00
|
|
|
return (counter_u64_fetch(stats->rx_bytes));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
case IFCOUNTER_OBYTES:
|
2017-10-31 16:31:23 +00:00
|
|
|
return (counter_u64_fetch(stats->tx_bytes));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
case IFCOUNTER_IQDROPS:
|
2017-10-31 16:31:23 +00:00
|
|
|
return (counter_u64_fetch(stats->rx_drops));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
default:
|
|
|
|
return (if_get_counter_default(ifp, cnt));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_media_change(if_t ifp)
|
|
|
|
{
|
|
|
|
/* Media Change is not supported by firmware */
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_media_status(if_t ifp, struct ifmediareq *ifmr)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = if_getsoftc(ifp);
|
|
|
|
ena_trace(ENA_DBG, "enter");
|
|
|
|
|
2017-11-09 12:07:02 +00:00
|
|
|
mtx_lock(&adapter->global_mtx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
|
|
|
|
if (!adapter->link_status) {
|
2017-11-09 12:07:02 +00:00
|
|
|
mtx_unlock(&adapter->global_mtx);
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_INFO, "link_status = false");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
2019-05-30 13:06:07 +00:00
|
|
|
ifmr->ifm_active |= IFM_UNKNOWN | IFM_FDX;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 12:07:02 +00:00
|
|
|
mtx_unlock(&adapter->global_mtx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_init(void *arg)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = (struct ena_adapter *)arg;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if (!adapter->up) {
|
2017-07-03 23:59:11 +00:00
|
|
|
sx_xlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_up(adapter);
|
2017-07-03 23:59:11 +00:00
|
|
|
sx_unlock(&adapter->ioctl_sx);
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_ioctl(if_t ifp, u_long command, caddr_t data)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter;
|
|
|
|
struct ifreq *ifr;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
adapter = ifp->if_softc;
|
|
|
|
ifr = (struct ifreq *)data;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Acquiring lock to prevent from running up and down routines parallel.
|
|
|
|
*/
|
|
|
|
rc = 0;
|
|
|
|
switch (command) {
|
|
|
|
case SIOCSIFMTU:
|
2018-05-10 09:32:59 +00:00
|
|
|
if (ifp->if_mtu == ifr->ifr_mtu)
|
|
|
|
break;
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_xlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_down(adapter);
|
|
|
|
|
|
|
|
ena_change_mtu(ifp, ifr->ifr_mtu);
|
|
|
|
|
|
|
|
rc = ena_up(adapter);
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_unlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case SIOCSIFFLAGS:
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((ifp->if_flags & IFF_UP) != 0) {
|
|
|
|
if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0) {
|
|
|
|
if ((ifp->if_flags & (IFF_PROMISC |
|
|
|
|
IFF_ALLMULTI)) != 0) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"ioctl promisc/allmulti\n");
|
|
|
|
}
|
|
|
|
} else {
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_xlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rc = ena_up(adapter);
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_unlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
} else {
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0) {
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_xlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_down(adapter);
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_unlock(&adapter->ioctl_sx);
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SIOCADDMULTI:
|
|
|
|
case SIOCDELMULTI:
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SIOCSIFMEDIA:
|
|
|
|
case SIOCGIFMEDIA:
|
|
|
|
rc = ifmedia_ioctl(ifp, ifr, &adapter->media, command);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SIOCSIFCAP:
|
|
|
|
{
|
|
|
|
int reinit = 0;
|
|
|
|
|
|
|
|
if (ifr->ifr_reqcap != ifp->if_capenable) {
|
|
|
|
ifp->if_capenable = ifr->ifr_reqcap;
|
|
|
|
reinit = 1;
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((reinit != 0) &&
|
|
|
|
((if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0)) {
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_xlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_down(adapter);
|
|
|
|
rc = ena_up(adapter);
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_unlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
rc = ether_ioctl(ifp, command, data);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_get_dev_offloads(struct ena_com_dev_get_features_ctx *feat)
|
|
|
|
{
|
|
|
|
int caps = 0;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((feat->offload.tx &
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
(ENA_ADMIN_FEATURE_OFFLOAD_DESC_TX_L4_IPV4_CSUM_FULL_MASK |
|
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_TX_L4_IPV4_CSUM_PART_MASK |
|
2019-05-30 13:01:46 +00:00
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_TX_L3_CSUM_IPV4_MASK)) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
caps |= IFCAP_TXCSUM;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((feat->offload.tx &
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
(ENA_ADMIN_FEATURE_OFFLOAD_DESC_TX_L4_IPV6_CSUM_FULL_MASK |
|
2017-11-09 11:57:02 +00:00
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_TX_L4_IPV6_CSUM_PART_MASK)) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
caps |= IFCAP_TXCSUM_IPV6;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((feat->offload.tx &
|
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_TSO_IPV4_MASK) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
caps |= IFCAP_TSO4;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((feat->offload.tx &
|
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_TSO_IPV6_MASK) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
caps |= IFCAP_TSO6;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((feat->offload.rx_supported &
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
(ENA_ADMIN_FEATURE_OFFLOAD_DESC_RX_L4_IPV4_CSUM_MASK |
|
2017-11-09 11:57:02 +00:00
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_RX_L3_CSUM_IPV4_MASK)) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
caps |= IFCAP_RXCSUM;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((feat->offload.rx_supported &
|
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_RX_L4_IPV6_CSUM_MASK) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
caps |= IFCAP_RXCSUM_IPV6;
|
|
|
|
|
|
|
|
caps |= IFCAP_LRO | IFCAP_JUMBO_MTU;
|
|
|
|
|
|
|
|
return (caps);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_update_host_info(struct ena_admin_host_info *host_info, if_t ifp)
|
|
|
|
{
|
|
|
|
|
|
|
|
host_info->supported_network_features[0] =
|
|
|
|
(uint32_t)if_getcapabilities(ifp);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_update_hwassist(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
if_t ifp = adapter->ifp;
|
|
|
|
uint32_t feat = adapter->tx_offload_cap;
|
|
|
|
int cap = if_getcapenable(ifp);
|
|
|
|
int flags = 0;
|
|
|
|
|
|
|
|
if_clearhwassist(ifp);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((cap & IFCAP_TXCSUM) != 0) {
|
|
|
|
if ((feat &
|
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_TX_L3_CSUM_IPV4_MASK) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
flags |= CSUM_IP;
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((feat &
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
(ENA_ADMIN_FEATURE_OFFLOAD_DESC_TX_L4_IPV4_CSUM_FULL_MASK |
|
2017-11-09 11:57:02 +00:00
|
|
|
ENA_ADMIN_FEATURE_OFFLOAD_DESC_TX_L4_IPV4_CSUM_PART_MASK)) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
flags |= CSUM_IP_UDP | CSUM_IP_TCP;
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((cap & IFCAP_TXCSUM_IPV6) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
flags |= CSUM_IP6_UDP | CSUM_IP6_TCP;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((cap & IFCAP_TSO4) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
flags |= CSUM_IP_TSO;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((cap & IFCAP_TSO6) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
flags |= CSUM_IP6_TSO;
|
|
|
|
|
|
|
|
if_sethwassistbits(ifp, flags, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_setup_ifnet(device_t pdev, struct ena_adapter *adapter,
|
|
|
|
struct ena_com_dev_get_features_ctx *feat)
|
|
|
|
{
|
|
|
|
if_t ifp;
|
|
|
|
int caps = 0;
|
|
|
|
|
|
|
|
ifp = adapter->ifp = if_gethandle(IFT_ETHER);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(ifp == NULL)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_ALERT, "can not allocate ifnet structure\n");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (ENXIO);
|
|
|
|
}
|
|
|
|
if_initname(ifp, device_get_name(pdev), device_get_unit(pdev));
|
|
|
|
if_setdev(ifp, pdev);
|
|
|
|
if_setsoftc(ifp, adapter);
|
|
|
|
|
|
|
|
if_setflags(ifp, IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST);
|
|
|
|
if_setinitfn(ifp, ena_init);
|
|
|
|
if_settransmitfn(ifp, ena_mq_start);
|
|
|
|
if_setqflushfn(ifp, ena_qflush);
|
|
|
|
if_setioctlfn(ifp, ena_ioctl);
|
|
|
|
if_setgetcounterfn(ifp, ena_get_counter);
|
|
|
|
|
|
|
|
if_setsendqlen(ifp, adapter->tx_ring_size);
|
|
|
|
if_setsendqready(ifp);
|
|
|
|
if_setmtu(ifp, ETHERMTU);
|
|
|
|
if_setbaudrate(ifp, 0);
|
|
|
|
/* Zeroize capabilities... */
|
|
|
|
if_setcapabilities(ifp, 0);
|
|
|
|
if_setcapenable(ifp, 0);
|
|
|
|
/* check hardware support */
|
|
|
|
caps = ena_get_dev_offloads(feat);
|
|
|
|
/* ... and set them */
|
|
|
|
if_setcapabilitiesbit(ifp, caps, 0);
|
|
|
|
|
|
|
|
/* TSO parameters */
|
2017-07-04 00:08:47 +00:00
|
|
|
ifp->if_hw_tsomax = ENA_TSO_MAXSIZE -
|
|
|
|
(ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN);
|
|
|
|
ifp->if_hw_tsomaxsegcount = adapter->max_tx_sgl_size - 1;
|
|
|
|
ifp->if_hw_tsomaxsegsize = ENA_TSO_MAXSIZE;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
if_setifheaderlen(ifp, sizeof(struct ether_vlan_header));
|
|
|
|
if_setcapenable(ifp, if_getcapabilities(ifp));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Specify the media types supported by this adapter and register
|
|
|
|
* callbacks to update media and link information
|
|
|
|
*/
|
|
|
|
ifmedia_init(&adapter->media, IFM_IMASK,
|
|
|
|
ena_media_change, ena_media_status);
|
|
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
|
|
ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO);
|
|
|
|
|
|
|
|
ether_ifattach(ifp, adapter->mac_addr);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_down(struct ena_adapter *adapter)
|
|
|
|
{
|
2017-10-31 12:41:07 +00:00
|
|
|
int rc;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
if (adapter->up) {
|
|
|
|
device_printf(adapter->pdev, "device is going DOWN\n");
|
|
|
|
|
|
|
|
callout_drain(&adapter->timer_service);
|
|
|
|
|
|
|
|
adapter->up = false;
|
|
|
|
if_setdrvflagbits(adapter->ifp, IFF_DRV_OACTIVE,
|
|
|
|
IFF_DRV_RUNNING);
|
|
|
|
|
|
|
|
ena_free_io_irq(adapter);
|
|
|
|
|
2017-10-31 12:41:07 +00:00
|
|
|
if (adapter->trigger_reset) {
|
|
|
|
rc = ena_com_dev_reset(adapter->ena_dev,
|
|
|
|
adapter->reset_reason);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
2017-10-31 12:41:07 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Device reset failed\n");
|
|
|
|
}
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_destroy_all_io_queues(adapter);
|
|
|
|
|
|
|
|
ena_free_all_tx_bufs(adapter);
|
|
|
|
ena_free_all_rx_bufs(adapter);
|
|
|
|
ena_free_all_tx_resources(adapter);
|
|
|
|
ena_free_all_rx_resources(adapter);
|
|
|
|
|
|
|
|
counter_u64_add(adapter->dev_stats.interface_down, 1);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_tx_csum(struct ena_com_tx_ctx *ena_tx_ctx, struct mbuf *mbuf)
|
|
|
|
{
|
|
|
|
struct ena_com_tx_meta *ena_meta;
|
|
|
|
struct ether_vlan_header *eh;
|
|
|
|
u32 mss;
|
|
|
|
bool offload;
|
|
|
|
uint16_t etype;
|
|
|
|
int ehdrlen;
|
|
|
|
struct ip *ip;
|
|
|
|
int iphlen;
|
|
|
|
struct tcphdr *th;
|
|
|
|
|
|
|
|
offload = false;
|
|
|
|
ena_meta = &ena_tx_ctx->ena_meta;
|
|
|
|
mss = mbuf->m_pkthdr.tso_segsz;
|
|
|
|
|
|
|
|
if (mss != 0)
|
|
|
|
offload = true;
|
|
|
|
|
|
|
|
if ((mbuf->m_pkthdr.csum_flags & CSUM_TSO) != 0)
|
|
|
|
offload = true;
|
|
|
|
|
|
|
|
if ((mbuf->m_pkthdr.csum_flags & CSUM_OFFLOAD) != 0)
|
|
|
|
offload = true;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if (!offload) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_tx_ctx->meta_valid = 0;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Determine where frame payload starts. */
|
|
|
|
eh = mtod(mbuf, struct ether_vlan_header *);
|
|
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
|
|
etype = ntohs(eh->evl_proto);
|
|
|
|
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
|
|
} else {
|
|
|
|
etype = ntohs(eh->evl_encap_proto);
|
|
|
|
ehdrlen = ETHER_HDR_LEN;
|
|
|
|
}
|
|
|
|
|
|
|
|
ip = (struct ip *)(mbuf->m_data + ehdrlen);
|
|
|
|
iphlen = ip->ip_hl << 2;
|
|
|
|
th = (struct tcphdr *)((caddr_t)ip + iphlen);
|
|
|
|
|
|
|
|
if ((mbuf->m_pkthdr.csum_flags & CSUM_IP) != 0) {
|
|
|
|
ena_tx_ctx->l3_csum_enable = 1;
|
|
|
|
}
|
|
|
|
if ((mbuf->m_pkthdr.csum_flags & CSUM_TSO) != 0) {
|
|
|
|
ena_tx_ctx->tso_enable = 1;
|
|
|
|
ena_meta->l4_hdr_len = (th->th_off);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (etype) {
|
|
|
|
case ETHERTYPE_IP:
|
|
|
|
ena_tx_ctx->l3_proto = ENA_ETH_IO_L3_PROTO_IPV4;
|
2017-11-09 12:32:10 +00:00
|
|
|
if ((ip->ip_off & htons(IP_DF)) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_tx_ctx->df = 1;
|
|
|
|
break;
|
|
|
|
case ETHERTYPE_IPV6:
|
|
|
|
ena_tx_ctx->l3_proto = ENA_ETH_IO_L3_PROTO_IPV6;
|
|
|
|
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ip->ip_p == IPPROTO_TCP) {
|
|
|
|
ena_tx_ctx->l4_proto = ENA_ETH_IO_L4_PROTO_TCP;
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((mbuf->m_pkthdr.csum_flags &
|
|
|
|
(CSUM_IP_TCP | CSUM_IP6_TCP)) != 0)
|
|
|
|
ena_tx_ctx->l4_csum_enable = 1;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
else
|
2017-11-09 11:57:02 +00:00
|
|
|
ena_tx_ctx->l4_csum_enable = 0;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
} else if (ip->ip_p == IPPROTO_UDP) {
|
|
|
|
ena_tx_ctx->l4_proto = ENA_ETH_IO_L4_PROTO_UDP;
|
2017-11-09 11:57:02 +00:00
|
|
|
if ((mbuf->m_pkthdr.csum_flags &
|
|
|
|
(CSUM_IP_UDP | CSUM_IP6_UDP)) != 0)
|
|
|
|
ena_tx_ctx->l4_csum_enable = 1;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
else
|
2017-11-09 11:57:02 +00:00
|
|
|
ena_tx_ctx->l4_csum_enable = 0;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
} else {
|
|
|
|
ena_tx_ctx->l4_proto = ENA_ETH_IO_L4_PROTO_UNKNOWN;
|
|
|
|
ena_tx_ctx->l4_csum_enable = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
ena_meta->mss = mss;
|
|
|
|
ena_meta->l3_hdr_len = iphlen;
|
|
|
|
ena_meta->l3_hdr_offset = ehdrlen;
|
|
|
|
ena_tx_ctx->meta_valid = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2017-07-04 00:10:29 +00:00
|
|
|
ena_check_and_collapse_mbuf(struct ena_ring *tx_ring, struct mbuf **mbuf)
|
2017-05-30 11:53:18 +00:00
|
|
|
{
|
|
|
|
struct ena_adapter *adapter;
|
2017-07-04 00:10:29 +00:00
|
|
|
struct mbuf *collapsed_mbuf;
|
2017-05-30 11:53:18 +00:00
|
|
|
int num_frags;
|
|
|
|
|
|
|
|
adapter = tx_ring->adapter;
|
|
|
|
num_frags = ena_mbuf_count(*mbuf);
|
|
|
|
|
|
|
|
/* One segment must be reserved for configuration descriptor. */
|
|
|
|
if (num_frags < adapter->max_tx_sgl_size)
|
|
|
|
return (0);
|
2017-07-04 00:10:29 +00:00
|
|
|
counter_u64_add(tx_ring->tx_stats.collapse, 1);
|
2017-05-30 11:53:18 +00:00
|
|
|
|
2017-07-04 00:10:29 +00:00
|
|
|
collapsed_mbuf = m_collapse(*mbuf, M_NOWAIT,
|
|
|
|
adapter->max_tx_sgl_size - 1);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(collapsed_mbuf == NULL)) {
|
2017-07-04 00:10:29 +00:00
|
|
|
counter_u64_add(tx_ring->tx_stats.collapse_err, 1);
|
2017-05-30 11:53:18 +00:00
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
|
2017-07-04 00:10:29 +00:00
|
|
|
/* If mbuf was collapsed succesfully, original mbuf is released. */
|
|
|
|
*mbuf = collapsed_mbuf;
|
2017-05-30 11:53:18 +00:00
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_xmit_mbuf(struct ena_ring *tx_ring, struct mbuf **mbuf)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
{
|
|
|
|
struct ena_adapter *adapter;
|
|
|
|
struct ena_tx_buffer *tx_info;
|
|
|
|
struct ena_com_tx_ctx ena_tx_ctx;
|
|
|
|
struct ena_com_dev *ena_dev;
|
|
|
|
struct ena_com_buf *ena_buf;
|
|
|
|
struct ena_com_io_sq* io_sq;
|
|
|
|
bus_dma_segment_t segs[ENA_BUS_DMA_SEGS];
|
|
|
|
void *push_hdr;
|
|
|
|
uint16_t next_to_use;
|
|
|
|
uint16_t req_id;
|
|
|
|
uint16_t push_len;
|
|
|
|
uint16_t ena_qid;
|
2018-05-10 09:37:54 +00:00
|
|
|
uint32_t nsegs, header_len;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
int i, rc;
|
2017-05-30 11:53:18 +00:00
|
|
|
int nb_hw_desc;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
ena_qid = ENA_IO_TXQ_IDX(tx_ring->que->id);
|
|
|
|
adapter = tx_ring->que->adapter;
|
|
|
|
ena_dev = adapter->ena_dev;
|
2017-11-09 12:37:19 +00:00
|
|
|
io_sq = &ena_dev->io_sq_queues[ena_qid];
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-07-04 00:10:29 +00:00
|
|
|
rc = ena_check_and_collapse_mbuf(tx_ring, mbuf);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
2017-05-30 11:53:18 +00:00
|
|
|
ena_trace(ENA_WARNING,
|
2017-07-04 00:10:29 +00:00
|
|
|
"Failed to collapse mbuf! err: %d", rc);
|
2017-05-30 11:53:18 +00:00
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
next_to_use = tx_ring->next_to_use;
|
|
|
|
req_id = tx_ring->free_tx_ids[next_to_use];
|
|
|
|
tx_info = &tx_ring->tx_buffer_info[req_id];
|
|
|
|
|
2017-05-30 11:53:18 +00:00
|
|
|
tx_info->mbuf = *mbuf;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
tx_info->num_of_bufs = 0;
|
|
|
|
|
|
|
|
ena_buf = tx_info->bufs;
|
|
|
|
|
2017-05-30 11:53:18 +00:00
|
|
|
ena_trace(ENA_DBG | ENA_TXPTH, "Tx: %d bytes", (*mbuf)->m_pkthdr.len);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
push_len = 0;
|
2018-05-10 09:37:54 +00:00
|
|
|
/*
|
|
|
|
* header_len is just a hint for the device. Because FreeBSD is not
|
|
|
|
* giving us information about packet header length and it is not
|
|
|
|
* guaranteed that all packet headers will be in the 1st mbuf, setting
|
|
|
|
* header_len to 0 is making the device ignore this value and resolve
|
|
|
|
* header on it's own.
|
|
|
|
*/
|
|
|
|
header_len = 0;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
push_hdr = NULL;
|
|
|
|
|
|
|
|
rc = bus_dmamap_load_mbuf_sg(adapter->tx_buf_tag, tx_info->map,
|
2017-05-30 11:53:18 +00:00
|
|
|
*mbuf, segs, &nsegs, BUS_DMA_NOWAIT);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((rc != 0) || (nsegs == 0))) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_trace(ENA_WARNING,
|
|
|
|
"dmamap load failed! err: %d nsegs: %d", rc, nsegs);
|
|
|
|
counter_u64_add(tx_ring->tx_stats.dma_mapping_err, 1);
|
|
|
|
tx_info->mbuf = NULL;
|
|
|
|
if (rc == ENOMEM)
|
|
|
|
return (ENA_COM_NO_MEM);
|
|
|
|
else
|
|
|
|
return (ENA_COM_INVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < nsegs; i++) {
|
|
|
|
ena_buf->len = segs[i].ds_len;
|
|
|
|
ena_buf->paddr = segs[i].ds_addr;
|
|
|
|
ena_buf++;
|
|
|
|
}
|
|
|
|
tx_info->num_of_bufs = nsegs;
|
|
|
|
|
|
|
|
memset(&ena_tx_ctx, 0x0, sizeof(struct ena_com_tx_ctx));
|
|
|
|
ena_tx_ctx.ena_bufs = tx_info->bufs;
|
|
|
|
ena_tx_ctx.push_header = push_hdr;
|
|
|
|
ena_tx_ctx.num_bufs = tx_info->num_of_bufs;
|
|
|
|
ena_tx_ctx.req_id = req_id;
|
|
|
|
ena_tx_ctx.header_len = header_len;
|
|
|
|
|
|
|
|
/* Set flags and meta data */
|
2017-05-30 11:53:18 +00:00
|
|
|
ena_tx_csum(&ena_tx_ctx, *mbuf);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* Prepare the packet's descriptors and send them to device */
|
|
|
|
rc = ena_com_prepare_tx(io_sq, &ena_tx_ctx, &nb_hw_desc);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
2019-05-30 13:14:58 +00:00
|
|
|
if (likely(rc == ENA_COM_NO_MEM)) {
|
|
|
|
ena_trace(ENA_DBG | ENA_TXPTH,
|
|
|
|
"tx ring[%d] if out of space\n", tx_ring->que->id);
|
|
|
|
} else {
|
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"failed to prepare tx bufs\n");
|
|
|
|
}
|
2017-11-09 12:01:46 +00:00
|
|
|
counter_u64_add(tx_ring->tx_stats.prepare_ctx_err, 1);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
goto dma_error;
|
|
|
|
}
|
|
|
|
|
|
|
|
counter_enter();
|
|
|
|
counter_u64_add_protected(tx_ring->tx_stats.cnt, 1);
|
2017-11-09 11:57:02 +00:00
|
|
|
counter_u64_add_protected(tx_ring->tx_stats.bytes,
|
|
|
|
(*mbuf)->m_pkthdr.len);
|
2017-10-31 16:31:23 +00:00
|
|
|
|
|
|
|
counter_u64_add_protected(adapter->hw_stats.tx_packets, 1);
|
|
|
|
counter_u64_add_protected(adapter->hw_stats.tx_bytes,
|
|
|
|
(*mbuf)->m_pkthdr.len);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
counter_exit();
|
|
|
|
|
|
|
|
tx_info->tx_descs = nb_hw_desc;
|
|
|
|
getbinuptime(&tx_info->timestamp);
|
|
|
|
tx_info->print_once = true;
|
|
|
|
|
|
|
|
tx_ring->next_to_use = ENA_TX_RING_IDX_NEXT(next_to_use,
|
|
|
|
tx_ring->ring_size);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
bus_dmamap_sync(adapter->tx_buf_tag, tx_info->map,
|
|
|
|
BUS_DMASYNC_PREWRITE);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
dma_error:
|
|
|
|
tx_info->mbuf = NULL;
|
|
|
|
bus_dmamap_unload(adapter->tx_buf_tag, tx_info->map);
|
|
|
|
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_start_xmit(struct ena_ring *tx_ring)
|
|
|
|
{
|
|
|
|
struct mbuf *mbuf;
|
|
|
|
struct ena_adapter *adapter = tx_ring->adapter;
|
|
|
|
struct ena_com_io_sq* io_sq;
|
|
|
|
int ena_qid;
|
|
|
|
int acum_pkts = 0;
|
|
|
|
int ret = 0;
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((if_getdrvflags(adapter->ifp) & IFF_DRV_RUNNING) == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(!adapter->link_status))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
ena_qid = ENA_IO_TXQ_IDX(tx_ring->que->id);
|
|
|
|
io_sq = &adapter->ena_dev->io_sq_queues[ena_qid];
|
|
|
|
|
|
|
|
while ((mbuf = drbr_peek(adapter->ifp, tx_ring->br)) != NULL) {
|
|
|
|
ena_trace(ENA_DBG | ENA_TXPTH, "\ndequeued mbuf %p with flags %#x and"
|
|
|
|
" header csum flags %#jx",
|
2017-11-09 13:30:39 +00:00
|
|
|
mbuf, mbuf->m_flags, (uint64_t)mbuf->m_pkthdr.csum_flags);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2019-05-30 13:01:46 +00:00
|
|
|
if (unlikely(ena_com_free_desc(io_sq) <=
|
|
|
|
ENA_TX_CLEANUP_THRESHOLD))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_tx_cleanup(tx_ring);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((ret = ena_xmit_mbuf(tx_ring, &mbuf)) != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
if (ret == ENA_COM_NO_MEM) {
|
|
|
|
drbr_putback(adapter->ifp, tx_ring->br, mbuf);
|
|
|
|
} else if (ret == ENA_COM_NO_SPACE) {
|
|
|
|
drbr_putback(adapter->ifp, tx_ring->br, mbuf);
|
|
|
|
} else {
|
|
|
|
m_freem(mbuf);
|
|
|
|
drbr_advance(adapter->ifp, tx_ring->br);
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2017-07-04 00:04:31 +00:00
|
|
|
drbr_advance(adapter->ifp, tx_ring->br);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((if_getdrvflags(adapter->ifp) &
|
|
|
|
IFF_DRV_RUNNING) == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
acum_pkts++;
|
|
|
|
|
|
|
|
BPF_MTAP(adapter->ifp, mbuf);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(acum_pkts == DB_THRESHOLD)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
acum_pkts = 0;
|
|
|
|
wmb();
|
|
|
|
/* Trigger the dma engine */
|
|
|
|
ena_com_write_sq_doorbell(io_sq);
|
|
|
|
counter_u64_add(tx_ring->tx_stats.doorbells, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(acum_pkts != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
wmb();
|
|
|
|
/* Trigger the dma engine */
|
|
|
|
ena_com_write_sq_doorbell(io_sq);
|
|
|
|
counter_u64_add(tx_ring->tx_stats.doorbells, 1);
|
|
|
|
}
|
|
|
|
|
2019-05-30 13:01:46 +00:00
|
|
|
if (ena_com_free_desc(io_sq) <= ENA_TX_CLEANUP_THRESHOLD)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_tx_cleanup(tx_ring);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_deferred_mq_start(void *arg, int pending)
|
|
|
|
{
|
|
|
|
struct ena_ring *tx_ring = (struct ena_ring *)arg;
|
|
|
|
struct ifnet *ifp = tx_ring->adapter->ifp;
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
while (!drbr_empty(ifp, tx_ring->br) &&
|
|
|
|
(if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ENA_RING_MTX_LOCK(tx_ring);
|
|
|
|
ena_start_xmit(tx_ring);
|
|
|
|
ENA_RING_MTX_UNLOCK(tx_ring);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_mq_start(if_t ifp, struct mbuf *m)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = ifp->if_softc;
|
|
|
|
struct ena_ring *tx_ring;
|
|
|
|
int ret, is_drbr_empty;
|
|
|
|
uint32_t i;
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((if_getdrvflags(adapter->ifp) & IFF_DRV_RUNNING) == 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (ENODEV);
|
|
|
|
|
|
|
|
/* Which queue to use */
|
|
|
|
/*
|
|
|
|
* If everything is setup correctly, it should be the
|
|
|
|
* same bucket that the current CPU we're on is.
|
|
|
|
* It should improve performance.
|
|
|
|
*/
|
|
|
|
if (M_HASHTYPE_GET(m) != M_HASHTYPE_NONE) {
|
2019-05-30 13:12:14 +00:00
|
|
|
i = m->m_pkthdr.flowid % adapter->num_queues;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
} else {
|
|
|
|
i = curcpu % adapter->num_queues;
|
|
|
|
}
|
|
|
|
tx_ring = &adapter->tx_ring[i];
|
|
|
|
|
|
|
|
/* Check if drbr is empty before putting packet */
|
|
|
|
is_drbr_empty = drbr_empty(ifp, tx_ring->br);
|
|
|
|
ret = drbr_enqueue(ifp, tx_ring->br, m);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(ret != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
taskqueue_enqueue(tx_ring->enqueue_tq, &tx_ring->enqueue_task);
|
|
|
|
return (ret);
|
|
|
|
}
|
|
|
|
|
2019-05-30 13:01:46 +00:00
|
|
|
if (is_drbr_empty && (ENA_RING_MTX_TRYLOCK(tx_ring) != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_start_xmit(tx_ring);
|
|
|
|
ENA_RING_MTX_UNLOCK(tx_ring);
|
|
|
|
} else {
|
|
|
|
taskqueue_enqueue(tx_ring->enqueue_tq, &tx_ring->enqueue_task);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_qflush(if_t ifp)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = ifp->if_softc;
|
|
|
|
struct ena_ring *tx_ring = adapter->tx_ring;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for(i = 0; i < adapter->num_queues; ++i, ++tx_ring)
|
2017-11-09 11:57:02 +00:00
|
|
|
if (!drbr_empty(ifp, tx_ring->br)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ENA_RING_MTX_LOCK(tx_ring);
|
|
|
|
drbr_flush(ifp, tx_ring->br);
|
|
|
|
ENA_RING_MTX_UNLOCK(tx_ring);
|
|
|
|
}
|
|
|
|
|
|
|
|
if_qflush(ifp);
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
static int
|
|
|
|
ena_calc_io_queue_num(struct ena_adapter *adapter,
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
struct ena_com_dev_get_features_ctx *get_feat_ctx)
|
|
|
|
{
|
|
|
|
int io_sq_num, io_cq_num, io_queue_num;
|
|
|
|
|
|
|
|
io_sq_num = get_feat_ctx->max_queues.max_sq_num;
|
2017-11-09 13:33:02 +00:00
|
|
|
io_cq_num = get_feat_ctx->max_queues.max_cq_num;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
io_queue_num = min_t(int, mp_ncpus, ENA_MAX_NUM_IO_QUEUES);
|
|
|
|
io_queue_num = min_t(int, io_queue_num, io_sq_num);
|
|
|
|
io_queue_num = min_t(int, io_queue_num, io_cq_num);
|
|
|
|
/* 1 IRQ for for mgmnt and 1 IRQ for each TX/RX pair */
|
|
|
|
io_queue_num = min_t(int, io_queue_num,
|
|
|
|
pci_msix_count(adapter->pdev) - 1);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
return (io_queue_num);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
static int
|
|
|
|
ena_calc_queue_size(struct ena_adapter *adapter, uint16_t *max_tx_sgl_size,
|
|
|
|
uint16_t *max_rx_sgl_size, struct ena_com_dev_get_features_ctx *feat)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
{
|
|
|
|
uint32_t queue_size = ENA_DEFAULT_RING_SIZE;
|
|
|
|
uint32_t v;
|
|
|
|
uint32_t q;
|
|
|
|
|
|
|
|
queue_size = min_t(uint32_t, queue_size,
|
|
|
|
feat->max_queues.max_cq_depth);
|
|
|
|
queue_size = min_t(uint32_t, queue_size,
|
|
|
|
feat->max_queues.max_sq_depth);
|
|
|
|
|
|
|
|
/* round down to the nearest power of 2 */
|
|
|
|
v = queue_size;
|
|
|
|
while (v != 0) {
|
2017-11-09 11:57:02 +00:00
|
|
|
if (powerof2(queue_size) != 0)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
break;
|
|
|
|
v /= 2;
|
|
|
|
q = rounddown2(queue_size, v);
|
|
|
|
if (q != 0) {
|
|
|
|
queue_size = q;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely(queue_size == 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "Invalid queue size\n");
|
2017-11-09 11:57:02 +00:00
|
|
|
return (ENA_COM_FAULT);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
*max_tx_sgl_size = min_t(uint16_t, ENA_PKT_MAX_BUFS,
|
|
|
|
feat->max_queues.max_packet_tx_descs);
|
|
|
|
*max_rx_sgl_size = min_t(uint16_t, ENA_PKT_MAX_BUFS,
|
|
|
|
feat->max_queues.max_packet_rx_descs);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
return (queue_size);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
static int
|
|
|
|
ena_rss_init_default(struct ena_adapter *adapter)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
{
|
|
|
|
struct ena_com_dev *ena_dev = adapter->ena_dev;
|
|
|
|
device_t dev = adapter->pdev;
|
|
|
|
int qid, rc, i;
|
|
|
|
|
|
|
|
rc = ena_com_rss_init(ena_dev, ENA_RX_RSS_TABLE_LOG_SIZE);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
device_printf(dev, "Cannot init indirect table\n");
|
2017-11-09 11:54:32 +00:00
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < ENA_RX_RSS_TABLE_SIZE; i++) {
|
|
|
|
qid = i % adapter->num_queues;
|
|
|
|
rc = ena_com_indirect_table_fill_entry(ena_dev, i,
|
2017-11-09 11:57:02 +00:00
|
|
|
ENA_IO_RXQ_IDX(qid));
|
|
|
|
if (unlikely((rc != 0) && (rc != EOPNOTSUPP))) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(dev, "Cannot fill indirect table\n");
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_rss_destroy;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = ena_com_fill_hash_function(ena_dev, ENA_ADMIN_CRC32, NULL,
|
2017-11-09 11:57:02 +00:00
|
|
|
ENA_HASH_KEY_SIZE, 0xFFFFFFFF);
|
|
|
|
if (unlikely((rc != 0) && (rc != EOPNOTSUPP))) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(dev, "Cannot fill hash function\n");
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_rss_destroy;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
rc = ena_com_set_default_hash_ctrl(ena_dev);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely((rc != 0) && (rc != EOPNOTSUPP))) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(dev, "Cannot fill hash control\n");
|
2017-11-09 11:54:32 +00:00
|
|
|
goto err_rss_destroy;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
2017-11-09 11:54:32 +00:00
|
|
|
err_rss_destroy:
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_com_rss_destroy(ena_dev);
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_rss_init_default_deferred(void *arg)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter;
|
|
|
|
devclass_t dc;
|
|
|
|
int max;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
dc = devclass_find("ena");
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(dc == NULL)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
ena_trace(ENA_ALERT, "No devclass ena\n");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
max = devclass_get_maxunit(dc);
|
|
|
|
while (max-- >= 0) {
|
|
|
|
adapter = devclass_get_softc(dc, max);
|
|
|
|
if (adapter != NULL) {
|
|
|
|
rc = ena_rss_init_default(adapter);
|
|
|
|
adapter->rss_support = true;
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"WARNING: RSS was not properly initialized,"
|
2017-11-09 11:57:02 +00:00
|
|
|
" it will affect bandwidth\n");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->rss_support = false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
SYSINIT(ena_rss_init, SI_SUB_KICK_SCHEDULER, SI_ORDER_SECOND, ena_rss_init_default_deferred, NULL);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
static void
|
|
|
|
ena_config_host_info(struct ena_com_dev *ena_dev)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
{
|
|
|
|
struct ena_admin_host_info *host_info;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* Allocate only the host info */
|
|
|
|
rc = ena_com_allocate_host_info(ena_dev);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_trace(ENA_ALERT, "Cannot allocate host info\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
host_info = ena_dev->host_attr.host_info;
|
|
|
|
|
|
|
|
host_info->os_type = ENA_ADMIN_OS_FREEBSD;
|
|
|
|
host_info->kernel_ver = osreldate;
|
|
|
|
|
|
|
|
sprintf(host_info->kernel_ver_str, "%d", osreldate);
|
|
|
|
host_info->os_dist = 0;
|
|
|
|
strncpy(host_info->os_dist_str, osrelease,
|
|
|
|
sizeof(host_info->os_dist_str) - 1);
|
|
|
|
|
|
|
|
host_info->driver_version =
|
|
|
|
(DRV_MODULE_VER_MAJOR) |
|
|
|
|
(DRV_MODULE_VER_MINOR << ENA_ADMIN_HOST_INFO_MINOR_SHIFT) |
|
|
|
|
(DRV_MODULE_VER_SUBMINOR << ENA_ADMIN_HOST_INFO_SUB_MINOR_SHIFT);
|
|
|
|
|
|
|
|
rc = ena_com_set_host_attributes(ena_dev);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
2017-10-31 12:41:07 +00:00
|
|
|
if (rc == EOPNOTSUPP)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_trace(ENA_WARNING, "Cannot set host attributes\n");
|
|
|
|
else
|
|
|
|
ena_trace(ENA_ALERT, "Cannot set host attributes\n");
|
|
|
|
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
err:
|
|
|
|
ena_com_delete_host_info(ena_dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ena_device_init(struct ena_adapter *adapter, device_t pdev,
|
2017-11-09 11:57:02 +00:00
|
|
|
struct ena_com_dev_get_features_ctx *get_feat_ctx, int *wd_active)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
{
|
|
|
|
struct ena_com_dev* ena_dev = adapter->ena_dev;
|
|
|
|
bool readless_supported;
|
|
|
|
uint32_t aenq_groups;
|
|
|
|
int dma_width;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = ena_com_mmio_reg_read_request_init(ena_dev);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "failed to init mmio read less\n");
|
2017-11-09 11:57:02 +00:00
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The PCIe configuration space revision id indicate if mmio reg
|
|
|
|
* read is disabled
|
|
|
|
*/
|
|
|
|
readless_supported = !(pci_get_revid(pdev) & ENA_MMIO_DISABLE_REG_READ);
|
|
|
|
ena_com_set_mmio_read_mode(ena_dev, readless_supported);
|
|
|
|
|
2017-10-31 12:41:07 +00:00
|
|
|
rc = ena_com_dev_reset(ena_dev, ENA_REGS_RESET_NORMAL);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "Can not reset device\n");
|
|
|
|
goto err_mmio_read_less;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = ena_com_validate_version(ena_dev);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "device version is too low\n");
|
|
|
|
goto err_mmio_read_less;
|
|
|
|
}
|
|
|
|
|
|
|
|
dma_width = ena_com_get_dma_width(ena_dev);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(dma_width < 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "Invalid dma width value %d", dma_width);
|
|
|
|
rc = dma_width;
|
|
|
|
goto err_mmio_read_less;
|
|
|
|
}
|
|
|
|
adapter->dma_width = dma_width;
|
|
|
|
|
|
|
|
/* ENA admin level init */
|
2019-05-30 13:01:46 +00:00
|
|
|
rc = ena_com_admin_init(ena_dev, &aenq_handlers);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev,
|
|
|
|
"Can not initialize ena admin queue with device\n");
|
|
|
|
goto err_mmio_read_less;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* To enable the msix interrupts the driver needs to know the number
|
|
|
|
* of queues. So the driver uses polling mode to retrieve this
|
|
|
|
* information
|
|
|
|
*/
|
|
|
|
ena_com_set_admin_polling_mode(ena_dev, true);
|
|
|
|
|
|
|
|
ena_config_host_info(ena_dev);
|
|
|
|
|
|
|
|
/* Get Device Attributes */
|
|
|
|
rc = ena_com_get_dev_attr_feat(ena_dev, get_feat_ctx);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev,
|
|
|
|
"Cannot get attribute for ena device rc: %d\n", rc);
|
|
|
|
goto err_admin_init;
|
|
|
|
}
|
|
|
|
|
2019-05-30 13:08:00 +00:00
|
|
|
aenq_groups = BIT(ENA_ADMIN_LINK_CHANGE) |
|
|
|
|
BIT(ENA_ADMIN_FATAL_ERROR) |
|
|
|
|
BIT(ENA_ADMIN_WARNING) |
|
2019-05-30 13:09:53 +00:00
|
|
|
BIT(ENA_ADMIN_NOTIFICATION) |
|
2019-05-30 13:08:00 +00:00
|
|
|
BIT(ENA_ADMIN_KEEP_ALIVE);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
aenq_groups &= get_feat_ctx->aenq.supported_groups;
|
|
|
|
rc = ena_com_set_aenq_config(ena_dev, aenq_groups);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "Cannot configure aenq groups rc: %d\n", rc);
|
|
|
|
goto err_admin_init;
|
|
|
|
}
|
|
|
|
|
|
|
|
*wd_active = !!(aenq_groups & BIT(ENA_ADMIN_KEEP_ALIVE));
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
return (0);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
err_admin_init:
|
|
|
|
ena_com_delete_host_info(ena_dev);
|
|
|
|
ena_com_admin_destroy(ena_dev);
|
|
|
|
err_mmio_read_less:
|
|
|
|
ena_com_mmio_reg_read_request_destroy(ena_dev);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ena_enable_msix_and_set_admin_interrupts(struct ena_adapter *adapter,
|
|
|
|
int io_vectors)
|
|
|
|
{
|
|
|
|
struct ena_com_dev *ena_dev = adapter->ena_dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = ena_enable_msix(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "Error with MSI-X enablement\n");
|
2017-11-09 11:57:02 +00:00
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
ena_setup_mgmnt_intr(adapter);
|
|
|
|
|
|
|
|
rc = ena_request_mgmnt_irq(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "Cannot setup mgmnt queue intr\n");
|
|
|
|
goto err_disable_msix;
|
|
|
|
}
|
|
|
|
|
|
|
|
ena_com_set_admin_polling_mode(ena_dev, false);
|
|
|
|
|
|
|
|
ena_com_admin_aenq_enable(ena_dev);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
return (0);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
err_disable_msix:
|
|
|
|
ena_disable_msix(adapter);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Function called on ENA_ADMIN_KEEP_ALIVE event */
|
|
|
|
static void ena_keep_alive_wd(void *adapter_data,
|
|
|
|
struct ena_admin_aenq_entry *aenq_e)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = (struct ena_adapter *)adapter_data;
|
2017-10-31 16:31:23 +00:00
|
|
|
struct ena_admin_aenq_keep_alive_desc *desc;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
sbintime_t stime;
|
2017-10-31 16:31:23 +00:00
|
|
|
uint64_t rx_drops;
|
|
|
|
|
|
|
|
desc = (struct ena_admin_aenq_keep_alive_desc *)aenq_e;
|
|
|
|
|
|
|
|
rx_drops = ((uint64_t)desc->rx_drops_high << 32) | desc->rx_drops_low;
|
|
|
|
counter_u64_zero(adapter->hw_stats.rx_drops);
|
|
|
|
counter_u64_add(adapter->hw_stats.rx_drops, rx_drops);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
stime = getsbinuptime();
|
|
|
|
atomic_store_rel_64(&adapter->keep_alive_timestamp, stime);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Check for keep alive expiration */
|
|
|
|
static void check_for_missing_keep_alive(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
sbintime_t timestamp, time;
|
|
|
|
|
|
|
|
if (adapter->wd_active == 0)
|
|
|
|
return;
|
|
|
|
|
2019-05-30 13:09:53 +00:00
|
|
|
if (adapter->keep_alive_timeout == ENA_HW_HINTS_NO_TIMEOUT)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
timestamp = atomic_load_acq_64(&adapter->keep_alive_timestamp);
|
|
|
|
time = getsbinuptime() - timestamp;
|
|
|
|
if (unlikely(time > adapter->keep_alive_timeout)) {
|
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Keep alive watchdog timeout.\n");
|
|
|
|
counter_u64_add(adapter->dev_stats.wd_expired, 1);
|
2017-10-31 12:41:07 +00:00
|
|
|
adapter->reset_reason = ENA_REGS_RESET_KEEP_ALIVE_TO;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->trigger_reset = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Check if admin queue is enabled */
|
|
|
|
static void check_for_admin_com_state(struct ena_adapter *adapter)
|
|
|
|
{
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely(ena_com_get_admin_running_state(adapter->ena_dev) ==
|
|
|
|
false)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"ENA admin queue is not in running state!\n");
|
|
|
|
counter_u64_add(adapter->dev_stats.admin_q_pause, 1);
|
2017-10-31 12:41:07 +00:00
|
|
|
adapter->reset_reason = ENA_REGS_RESET_ADMIN_TO;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->trigger_reset = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:50:52 +00:00
|
|
|
static int
|
|
|
|
check_missing_comp_in_queue(struct ena_adapter *adapter,
|
|
|
|
struct ena_ring *tx_ring)
|
|
|
|
{
|
|
|
|
struct bintime curtime, time;
|
|
|
|
struct ena_tx_buffer *tx_buf;
|
|
|
|
uint32_t missed_tx = 0;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
getbinuptime(&curtime);
|
|
|
|
|
|
|
|
for (i = 0; i < tx_ring->ring_size; i++) {
|
|
|
|
tx_buf = &tx_ring->tx_buffer_info[i];
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if (bintime_isset(&tx_buf->timestamp) == 0)
|
2017-11-09 11:50:52 +00:00
|
|
|
continue;
|
|
|
|
|
|
|
|
time = curtime;
|
|
|
|
bintime_sub(&time, &tx_buf->timestamp);
|
|
|
|
|
|
|
|
/* Check again if packet is still waiting */
|
|
|
|
if (unlikely(bttosbt(time) > adapter->missing_tx_timeout)) {
|
|
|
|
|
|
|
|
if (!tx_buf->print_once)
|
|
|
|
ena_trace(ENA_WARNING, "Found a Tx that wasn't "
|
|
|
|
"completed on time, qid %d, index %d.\n",
|
|
|
|
tx_ring->qid, i);
|
|
|
|
|
|
|
|
tx_buf->print_once = true;
|
|
|
|
missed_tx++;
|
2017-11-09 12:07:02 +00:00
|
|
|
counter_u64_add(tx_ring->tx_stats.missing_tx_comp, 1);
|
2017-11-09 11:50:52 +00:00
|
|
|
|
|
|
|
if (unlikely(missed_tx >
|
|
|
|
adapter->missing_tx_threshold)) {
|
|
|
|
device_printf(adapter->pdev,
|
2017-11-09 13:30:39 +00:00
|
|
|
"The number of lost tx completion "
|
|
|
|
"is above the threshold (%d > %d). "
|
|
|
|
"Reset the device\n",
|
|
|
|
missed_tx, adapter->missing_tx_threshold);
|
2017-11-09 11:50:52 +00:00
|
|
|
adapter->reset_reason =
|
|
|
|
ENA_REGS_RESET_MISS_TX_CMPL;
|
|
|
|
adapter->trigger_reset = true;
|
|
|
|
return (EIO);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/*
|
|
|
|
* Check for TX which were not completed on time.
|
|
|
|
* Timeout is defined by "missing_tx_timeout".
|
|
|
|
* Reset will be performed if number of incompleted
|
|
|
|
* transactions exceeds "missing_tx_threshold".
|
|
|
|
*/
|
2017-11-09 11:57:02 +00:00
|
|
|
static void
|
|
|
|
check_for_missing_tx_completions(struct ena_adapter *adapter)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
{
|
|
|
|
struct ena_ring *tx_ring;
|
2017-11-09 11:50:52 +00:00
|
|
|
int i, budget, rc;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* Make sure the driver doesn't turn the device in other process */
|
|
|
|
rmb();
|
|
|
|
|
|
|
|
if (!adapter->up)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (adapter->trigger_reset)
|
|
|
|
return;
|
|
|
|
|
2019-05-30 13:09:53 +00:00
|
|
|
if (adapter->missing_tx_timeout == ENA_HW_HINTS_NO_TIMEOUT)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
budget = adapter->missing_tx_max_queues;
|
|
|
|
|
|
|
|
for (i = adapter->next_monitored_tx_qid; i < adapter->num_queues; i++) {
|
|
|
|
tx_ring = &adapter->tx_ring[i];
|
|
|
|
|
2017-11-09 11:50:52 +00:00
|
|
|
rc = check_missing_comp_in_queue(adapter, tx_ring);
|
2017-11-09 11:57:02 +00:00
|
|
|
if (unlikely(rc != 0))
|
2017-11-09 11:50:52 +00:00
|
|
|
return;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
budget--;
|
2017-11-07 13:20:41 +00:00
|
|
|
if (budget == 0) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
i++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
adapter->next_monitored_tx_qid = i % adapter->num_queues;
|
|
|
|
}
|
|
|
|
|
2017-11-09 11:48:22 +00:00
|
|
|
/* trigger deferred rx cleanup after 2 consecutive detections */
|
|
|
|
#define EMPTY_RX_REFILL 2
|
|
|
|
/* For the rare case where the device runs out of Rx descriptors and the
|
|
|
|
* msix handler failed to refill new Rx descriptors (due to a lack of memory
|
|
|
|
* for example).
|
|
|
|
* This case will lead to a deadlock:
|
|
|
|
* The device won't send interrupts since all the new Rx packets will be dropped
|
|
|
|
* The msix handler won't allocate new Rx descriptors so the device won't be
|
|
|
|
* able to send new packets.
|
|
|
|
*
|
|
|
|
* When such a situation is detected - execute rx cleanup task in another thread
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
check_for_empty_rx_ring(struct ena_adapter *adapter)
|
|
|
|
{
|
|
|
|
struct ena_ring *rx_ring;
|
|
|
|
int i, refill_required;
|
|
|
|
|
|
|
|
if (!adapter->up)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (adapter->trigger_reset)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0; i < adapter->num_queues; i++) {
|
|
|
|
rx_ring = &adapter->rx_ring[i];
|
|
|
|
|
|
|
|
refill_required = ena_com_free_desc(rx_ring->ena_com_io_sq);
|
|
|
|
if (unlikely(refill_required == (rx_ring->ring_size - 1))) {
|
|
|
|
rx_ring->empty_rx_queue++;
|
|
|
|
|
|
|
|
if (rx_ring->empty_rx_queue >= EMPTY_RX_REFILL) {
|
|
|
|
counter_u64_add(rx_ring->rx_stats.empty_rx_ring,
|
|
|
|
1);
|
|
|
|
|
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"trigger refill for ring %d\n", i);
|
|
|
|
|
|
|
|
taskqueue_enqueue(rx_ring->cmpl_tq,
|
|
|
|
&rx_ring->cmpl_task);
|
|
|
|
rx_ring->empty_rx_queue = 0;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
rx_ring->empty_rx_queue = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
2019-05-30 13:09:53 +00:00
|
|
|
static void ena_update_hints(struct ena_adapter *adapter,
|
|
|
|
struct ena_admin_ena_hw_hints *hints)
|
|
|
|
{
|
|
|
|
struct ena_com_dev *ena_dev = adapter->ena_dev;
|
|
|
|
|
|
|
|
if (hints->admin_completion_tx_timeout)
|
|
|
|
ena_dev->admin_queue.completion_timeout =
|
|
|
|
hints->admin_completion_tx_timeout * 1000;
|
|
|
|
|
|
|
|
if (hints->mmio_read_timeout)
|
|
|
|
/* convert to usec */
|
|
|
|
ena_dev->mmio_read.reg_read_to =
|
|
|
|
hints->mmio_read_timeout * 1000;
|
|
|
|
|
|
|
|
if (hints->missed_tx_completion_count_threshold_to_reset)
|
|
|
|
adapter->missing_tx_threshold =
|
|
|
|
hints->missed_tx_completion_count_threshold_to_reset;
|
|
|
|
|
|
|
|
if (hints->missing_tx_completion_timeout) {
|
|
|
|
if (hints->missing_tx_completion_timeout ==
|
|
|
|
ENA_HW_HINTS_NO_TIMEOUT)
|
|
|
|
adapter->missing_tx_timeout = ENA_HW_HINTS_NO_TIMEOUT;
|
|
|
|
else
|
|
|
|
adapter->missing_tx_timeout =
|
|
|
|
SBT_1MS * hints->missing_tx_completion_timeout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (hints->driver_watchdog_timeout) {
|
|
|
|
if (hints->driver_watchdog_timeout == ENA_HW_HINTS_NO_TIMEOUT)
|
|
|
|
adapter->keep_alive_timeout = ENA_HW_HINTS_NO_TIMEOUT;
|
|
|
|
else
|
|
|
|
adapter->keep_alive_timeout =
|
|
|
|
SBT_1MS * hints->driver_watchdog_timeout;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
static void
|
|
|
|
ena_timer_service(void *data)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = (struct ena_adapter *)data;
|
|
|
|
struct ena_admin_host_info *host_info =
|
|
|
|
adapter->ena_dev->host_attr.host_info;
|
|
|
|
|
|
|
|
check_for_missing_keep_alive(adapter);
|
|
|
|
|
|
|
|
check_for_admin_com_state(adapter);
|
|
|
|
|
|
|
|
check_for_missing_tx_completions(adapter);
|
|
|
|
|
2017-11-09 11:48:22 +00:00
|
|
|
check_for_empty_rx_ring(adapter);
|
|
|
|
|
2017-11-09 11:57:02 +00:00
|
|
|
if (host_info != NULL)
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_update_host_info(host_info, adapter->ifp);
|
|
|
|
|
|
|
|
if (unlikely(adapter->trigger_reset)) {
|
|
|
|
device_printf(adapter->pdev, "Trigger reset is on\n");
|
|
|
|
taskqueue_enqueue(adapter->reset_tq, &adapter->reset_task);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Schedule another timeout one second from now.
|
|
|
|
*/
|
|
|
|
callout_schedule_sbt(&adapter->timer_service, SBT_1S, SBT_1S, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ena_reset_task(void *arg, int pending)
|
|
|
|
{
|
|
|
|
struct ena_com_dev_get_features_ctx get_feat_ctx;
|
|
|
|
struct ena_adapter *adapter = (struct ena_adapter *)arg;
|
|
|
|
struct ena_com_dev *ena_dev = adapter->ena_dev;
|
|
|
|
bool dev_up;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (unlikely(!adapter->trigger_reset)) {
|
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"device reset scheduled but trigger_reset is off\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
sx_xlock(&adapter->ioctl_sx);
|
|
|
|
|
|
|
|
callout_drain(&adapter->timer_service);
|
|
|
|
|
|
|
|
dev_up = adapter->up;
|
|
|
|
|
|
|
|
ena_com_set_admin_running_state(ena_dev, false);
|
|
|
|
ena_down(adapter);
|
2017-10-31 12:41:07 +00:00
|
|
|
ena_free_mgmnt_irq(adapter);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_disable_msix(adapter);
|
|
|
|
ena_com_abort_admin_commands(ena_dev);
|
|
|
|
ena_com_wait_for_abort_completion(ena_dev);
|
|
|
|
ena_com_admin_destroy(ena_dev);
|
|
|
|
ena_com_mmio_reg_read_request_destroy(ena_dev);
|
|
|
|
|
2017-10-31 12:41:07 +00:00
|
|
|
adapter->reset_reason = ENA_REGS_RESET_NORMAL;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->trigger_reset = false;
|
|
|
|
|
|
|
|
/* Finished destroy part. Restart the device */
|
|
|
|
rc = ena_device_init(adapter, adapter->pdev, &get_feat_ctx,
|
|
|
|
&adapter->wd_active);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"ENA device init failed! (err: %d)\n", rc);
|
|
|
|
goto err_dev_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = ena_enable_msix_and_set_admin_interrupts(adapter,
|
|
|
|
adapter->num_queues);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev, "Enable MSI-X failed\n");
|
|
|
|
goto err_com_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If the interface was up before the reset bring it up */
|
|
|
|
if (dev_up) {
|
|
|
|
rc = ena_up(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Failed to create I/O queues\n");
|
|
|
|
goto err_msix_free;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
callout_reset_sbt(&adapter->timer_service, SBT_1S, SBT_1S,
|
|
|
|
ena_timer_service, (void *)adapter, 0);
|
|
|
|
|
|
|
|
sx_unlock(&adapter->ioctl_sx);
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
err_msix_free:
|
|
|
|
ena_free_mgmnt_irq(adapter);
|
|
|
|
ena_disable_msix(adapter);
|
|
|
|
err_com_free:
|
|
|
|
ena_com_admin_destroy(ena_dev);
|
|
|
|
err_dev_free:
|
|
|
|
device_printf(adapter->pdev, "ENA reset failed!\n");
|
|
|
|
adapter->running = false;
|
|
|
|
sx_unlock(&adapter->ioctl_sx);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_attach - Device Initialization Routine
|
|
|
|
* @pdev: device information struct
|
|
|
|
*
|
|
|
|
* Returns 0 on success, otherwise on failure.
|
|
|
|
*
|
|
|
|
* ena_attach initializes an adapter identified by a device structure.
|
|
|
|
* The OS initialization, configuring of the adapter private structure,
|
|
|
|
* and a hardware reset occur.
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_attach(device_t pdev)
|
|
|
|
{
|
|
|
|
struct ena_com_dev_get_features_ctx get_feat_ctx;
|
|
|
|
static int version_printed;
|
|
|
|
struct ena_adapter *adapter;
|
|
|
|
struct ena_com_dev *ena_dev = NULL;
|
|
|
|
uint16_t tx_sgl_size = 0;
|
|
|
|
uint16_t rx_sgl_size = 0;
|
|
|
|
int io_queue_num;
|
|
|
|
int queue_size;
|
|
|
|
int rc;
|
|
|
|
adapter = device_get_softc(pdev);
|
|
|
|
adapter->pdev = pdev;
|
|
|
|
|
|
|
|
mtx_init(&adapter->global_mtx, "ENA global mtx", NULL, MTX_DEF);
|
|
|
|
sx_init(&adapter->ioctl_sx, "ENA ioctl sx");
|
|
|
|
|
|
|
|
/* Set up the timer service */
|
|
|
|
callout_init_mtx(&adapter->timer_service, &adapter->global_mtx, 0);
|
|
|
|
adapter->keep_alive_timeout = DEFAULT_KEEP_ALIVE_TO;
|
|
|
|
adapter->missing_tx_timeout = DEFAULT_TX_CMP_TO;
|
|
|
|
adapter->missing_tx_max_queues = DEFAULT_TX_MONITORED_QUEUES;
|
|
|
|
adapter->missing_tx_threshold = DEFAULT_TX_CMP_THRESHOLD;
|
|
|
|
|
|
|
|
if (version_printed++ == 0)
|
|
|
|
device_printf(pdev, "%s\n", ena_version);
|
|
|
|
|
|
|
|
rc = ena_allocate_pci_resources(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "PCI resource allocation failed!\n");
|
|
|
|
ena_free_pci_resources(adapter);
|
2017-11-07 13:20:41 +00:00
|
|
|
return (rc);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Allocate memory for ena_dev structure */
|
2017-11-07 13:20:41 +00:00
|
|
|
ena_dev = malloc(sizeof(struct ena_com_dev), M_DEVBUF,
|
|
|
|
M_WAITOK | M_ZERO);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
adapter->ena_dev = ena_dev;
|
|
|
|
ena_dev->dmadev = pdev;
|
|
|
|
ena_dev->bus = malloc(sizeof(struct ena_bus), M_DEVBUF,
|
|
|
|
M_WAITOK | M_ZERO);
|
|
|
|
|
|
|
|
/* Store register resources */
|
|
|
|
((struct ena_bus*)(ena_dev->bus))->reg_bar_t =
|
|
|
|
rman_get_bustag(adapter->registers);
|
|
|
|
((struct ena_bus*)(ena_dev->bus))->reg_bar_h =
|
|
|
|
rman_get_bushandle(adapter->registers);
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(((struct ena_bus*)(ena_dev->bus))->reg_bar_h == 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "failed to pmap registers bar\n");
|
|
|
|
rc = ENXIO;
|
2017-11-07 13:20:41 +00:00
|
|
|
goto err_bus_free;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
|
|
|
|
|
|
|
|
/* Device initialization */
|
|
|
|
rc = ena_device_init(adapter, pdev, &get_feat_ctx, &adapter->wd_active);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev, "ENA device init failed! (err: %d)\n", rc);
|
|
|
|
rc = ENXIO;
|
|
|
|
goto err_bus_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
adapter->keep_alive_timestamp = getsbinuptime();
|
|
|
|
|
|
|
|
adapter->tx_offload_cap = get_feat_ctx.offload.tx;
|
|
|
|
|
|
|
|
/* Set for sure that interface is not up */
|
|
|
|
adapter->up = false;
|
|
|
|
|
|
|
|
memcpy(adapter->mac_addr, get_feat_ctx.dev_attr.mac_addr,
|
|
|
|
ETHER_ADDR_LEN);
|
|
|
|
|
|
|
|
/* calculate IO queue number to create */
|
|
|
|
io_queue_num = ena_calc_io_queue_num(adapter, &get_feat_ctx);
|
|
|
|
|
|
|
|
ENA_ASSERT(io_queue_num > 0, "Invalid queue number: %d\n",
|
|
|
|
io_queue_num);
|
|
|
|
adapter->num_queues = io_queue_num;
|
|
|
|
|
2017-11-09 13:35:07 +00:00
|
|
|
adapter->max_mtu = get_feat_ctx.dev_attr.max_mtu;
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* calculatre ring sizes */
|
|
|
|
queue_size = ena_calc_queue_size(adapter,&tx_sgl_size,
|
|
|
|
&rx_sgl_size, &get_feat_ctx);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely((queue_size <= 0) || (io_queue_num <= 0))) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
rc = ENA_COM_FAULT;
|
|
|
|
goto err_com_free;
|
|
|
|
}
|
|
|
|
|
2017-10-31 12:41:07 +00:00
|
|
|
adapter->reset_reason = ENA_REGS_RESET_NORMAL;
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
adapter->tx_ring_size = queue_size;
|
|
|
|
adapter->rx_ring_size = queue_size;
|
|
|
|
|
|
|
|
adapter->max_tx_sgl_size = tx_sgl_size;
|
|
|
|
adapter->max_rx_sgl_size = rx_sgl_size;
|
|
|
|
|
|
|
|
/* set up dma tags for rx and tx buffers */
|
|
|
|
rc = ena_setup_tx_dma_tag(adapter);
|
2017-11-09 13:30:39 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
|
|
|
device_printf(pdev, "Failed to create TX DMA tag\n");
|
2017-11-07 13:20:41 +00:00
|
|
|
goto err_com_free;
|
2017-11-09 13:30:39 +00:00
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
rc = ena_setup_rx_dma_tag(adapter);
|
2017-11-09 13:30:39 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
|
|
|
device_printf(pdev, "Failed to create RX DMA tag\n");
|
2017-11-07 13:20:41 +00:00
|
|
|
goto err_tx_tag_free;
|
2017-11-09 13:30:39 +00:00
|
|
|
}
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* initialize rings basic information */
|
|
|
|
device_printf(pdev, "initalize %d io queues\n", io_queue_num);
|
2017-11-07 13:20:41 +00:00
|
|
|
ena_init_io_rings(adapter);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
/* setup network interface */
|
|
|
|
rc = ena_setup_ifnet(pdev, adapter, &get_feat_ctx);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
2017-11-09 13:30:39 +00:00
|
|
|
device_printf(pdev, "Error with network interface setup\n");
|
2017-11-07 13:20:41 +00:00
|
|
|
goto err_io_free;
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
rc = ena_enable_msix_and_set_admin_interrupts(adapter, io_queue_num);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0)) {
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(pdev,
|
|
|
|
"Failed to enable and set the admin interrupts\n");
|
|
|
|
goto err_ifp_free;
|
|
|
|
}
|
|
|
|
|
2017-05-30 11:56:54 +00:00
|
|
|
/* Initialize reset task queue */
|
|
|
|
TASK_INIT(&adapter->reset_task, 0, ena_reset_task, adapter);
|
|
|
|
adapter->reset_tq = taskqueue_create("ena_reset_enqueue",
|
|
|
|
M_WAITOK | M_ZERO, taskqueue_thread_enqueue, &adapter->reset_tq);
|
|
|
|
taskqueue_start_threads(&adapter->reset_tq, 1, PI_NET,
|
|
|
|
"%s rstq", device_get_nameunit(adapter->pdev));
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/* Initialize statistics */
|
|
|
|
ena_alloc_counters((counter_u64_t *)&adapter->dev_stats,
|
|
|
|
sizeof(struct ena_stats_dev));
|
2017-10-31 16:31:23 +00:00
|
|
|
ena_alloc_counters((counter_u64_t *)&adapter->hw_stats,
|
|
|
|
sizeof(struct ena_hw_stats));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_sysctl_add_nodes(adapter);
|
|
|
|
|
|
|
|
/* Tell the stack that the interface is not active */
|
|
|
|
if_setdrvflagbits(adapter->ifp, IFF_DRV_OACTIVE, IFF_DRV_RUNNING);
|
|
|
|
|
|
|
|
adapter->running = true;
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
err_ifp_free:
|
|
|
|
if_detach(adapter->ifp);
|
|
|
|
if_free(adapter->ifp);
|
2017-11-07 13:20:41 +00:00
|
|
|
err_io_free:
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_free_all_io_rings_resources(adapter);
|
|
|
|
ena_free_rx_dma_tag(adapter);
|
2017-11-07 13:20:41 +00:00
|
|
|
err_tx_tag_free:
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_free_tx_dma_tag(adapter);
|
2017-11-07 13:20:41 +00:00
|
|
|
err_com_free:
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_com_admin_destroy(ena_dev);
|
|
|
|
ena_com_delete_host_info(ena_dev);
|
2017-11-07 13:20:41 +00:00
|
|
|
ena_com_mmio_reg_read_request_destroy(ena_dev);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
err_bus_free:
|
|
|
|
free(ena_dev->bus, M_DEVBUF);
|
|
|
|
free(ena_dev, M_DEVBUF);
|
|
|
|
ena_free_pci_resources(adapter);
|
2017-11-07 13:20:41 +00:00
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ena_detach - Device Removal Routine
|
|
|
|
* @pdev: device information struct
|
|
|
|
*
|
|
|
|
* ena_detach is called by the device subsystem to alert the driver
|
|
|
|
* that it should release a PCI device.
|
|
|
|
**/
|
|
|
|
static int
|
|
|
|
ena_detach(device_t pdev)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = device_get_softc(pdev);
|
|
|
|
struct ena_com_dev *ena_dev = adapter->ena_dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* Make sure VLANS are not using driver */
|
|
|
|
if (adapter->ifp->if_vlantrunk != NULL) {
|
|
|
|
device_printf(adapter->pdev ,"VLAN is in use, detach first\n");
|
|
|
|
return (EBUSY);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Free reset task and callout */
|
|
|
|
callout_drain(&adapter->timer_service);
|
|
|
|
while (taskqueue_cancel(adapter->reset_tq, &adapter->reset_task, NULL))
|
|
|
|
taskqueue_drain(adapter->reset_tq, &adapter->reset_task);
|
|
|
|
taskqueue_free(adapter->reset_tq);
|
|
|
|
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_xlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_down(adapter);
|
2017-05-30 11:55:02 +00:00
|
|
|
sx_unlock(&adapter->ioctl_sx);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
if (adapter->ifp != NULL) {
|
|
|
|
ether_ifdetach(adapter->ifp);
|
|
|
|
if_free(adapter->ifp);
|
|
|
|
}
|
|
|
|
|
|
|
|
ena_free_all_io_rings_resources(adapter);
|
|
|
|
|
2017-10-31 16:31:23 +00:00
|
|
|
ena_free_counters((counter_u64_t *)&adapter->hw_stats,
|
|
|
|
sizeof(struct ena_hw_stats));
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_free_counters((counter_u64_t *)&adapter->dev_stats,
|
|
|
|
sizeof(struct ena_stats_dev));
|
|
|
|
|
2017-11-09 11:59:21 +00:00
|
|
|
if (likely(adapter->rss_support))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_com_rss_destroy(ena_dev);
|
|
|
|
|
|
|
|
rc = ena_free_rx_dma_tag(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Unmapped RX DMA tag associations\n");
|
|
|
|
|
|
|
|
rc = ena_free_tx_dma_tag(adapter);
|
2017-11-09 11:59:21 +00:00
|
|
|
if (unlikely(rc != 0))
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Unmapped TX DMA tag associations\n");
|
|
|
|
|
|
|
|
/* Reset the device only if the device is running. */
|
|
|
|
if (adapter->running)
|
2017-10-31 12:41:07 +00:00
|
|
|
ena_com_dev_reset(ena_dev, adapter->reset_reason);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
|
|
|
|
ena_com_delete_host_info(ena_dev);
|
|
|
|
|
|
|
|
ena_free_irqs(adapter);
|
|
|
|
|
2017-11-09 11:52:52 +00:00
|
|
|
ena_com_abort_admin_commands(ena_dev);
|
|
|
|
|
|
|
|
ena_com_wait_for_abort_completion(ena_dev);
|
|
|
|
|
|
|
|
ena_com_admin_destroy(ena_dev);
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
ena_com_mmio_reg_read_request_destroy(ena_dev);
|
|
|
|
|
|
|
|
ena_free_pci_resources(adapter);
|
|
|
|
|
|
|
|
mtx_destroy(&adapter->global_mtx);
|
|
|
|
sx_destroy(&adapter->ioctl_sx);
|
|
|
|
|
|
|
|
if (ena_dev->bus != NULL)
|
|
|
|
free(ena_dev->bus, M_DEVBUF);
|
|
|
|
|
|
|
|
if (ena_dev != NULL)
|
|
|
|
free(ena_dev, M_DEVBUF);
|
|
|
|
|
|
|
|
return (bus_generic_detach(pdev));
|
|
|
|
}
|
|
|
|
|
|
|
|
/******************************************************************************
|
|
|
|
******************************** AENQ Handlers *******************************
|
|
|
|
*****************************************************************************/
|
|
|
|
/**
|
|
|
|
* ena_update_on_link_change:
|
|
|
|
* Notify the network interface about the change in link status
|
|
|
|
**/
|
|
|
|
static void
|
|
|
|
ena_update_on_link_change(void *adapter_data,
|
|
|
|
struct ena_admin_aenq_entry *aenq_e)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = (struct ena_adapter *)adapter_data;
|
|
|
|
struct ena_admin_aenq_link_change_desc *aenq_desc;
|
|
|
|
int status;
|
|
|
|
if_t ifp;
|
|
|
|
|
|
|
|
aenq_desc = (struct ena_admin_aenq_link_change_desc *)aenq_e;
|
|
|
|
ifp = adapter->ifp;
|
|
|
|
status = aenq_desc->flags &
|
|
|
|
ENA_ADMIN_AENQ_LINK_CHANGE_DESC_LINK_STATUS_MASK;
|
|
|
|
|
|
|
|
if (status != 0) {
|
|
|
|
device_printf(adapter->pdev, "link is UP\n");
|
|
|
|
if_link_state_change(ifp, LINK_STATE_UP);
|
|
|
|
} else if (status == 0) {
|
|
|
|
device_printf(adapter->pdev, "link is DOWN\n");
|
|
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
|
|
} else {
|
|
|
|
device_printf(adapter->pdev, "invalid value recvd\n");
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
|
|
|
|
adapter->link_status = status;
|
|
|
|
}
|
|
|
|
|
2019-05-30 13:09:53 +00:00
|
|
|
static void ena_notification(void *adapter_data,
|
|
|
|
struct ena_admin_aenq_entry *aenq_e)
|
|
|
|
{
|
|
|
|
struct ena_adapter *adapter = (struct ena_adapter *)adapter_data;
|
|
|
|
struct ena_admin_ena_hw_hints *hints;
|
|
|
|
|
|
|
|
ENA_WARN(aenq_e->aenq_common_desc.group != ENA_ADMIN_NOTIFICATION,
|
|
|
|
"Invalid group(%x) expected %x\n", aenq_e->aenq_common_desc.group,
|
|
|
|
ENA_ADMIN_NOTIFICATION);
|
|
|
|
|
|
|
|
switch (aenq_e->aenq_common_desc.syndrom) {
|
|
|
|
case ENA_ADMIN_UPDATE_HINTS:
|
|
|
|
hints =
|
|
|
|
(struct ena_admin_ena_hw_hints *)(&aenq_e->inline_data_w4);
|
|
|
|
ena_update_hints(adapter, hints);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Invalid aenq notification link state %d\n",
|
|
|
|
aenq_e->aenq_common_desc.syndrom);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
/**
|
|
|
|
* This handler will called for unknown event group or unimplemented handlers
|
|
|
|
**/
|
|
|
|
static void
|
2019-05-30 13:08:00 +00:00
|
|
|
unimplemented_aenq_handler(void *adapter_data,
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
struct ena_admin_aenq_entry *aenq_e)
|
|
|
|
{
|
2019-05-30 13:08:00 +00:00
|
|
|
struct ena_adapter *adapter = (struct ena_adapter *)adapter_data;
|
|
|
|
|
|
|
|
device_printf(adapter->pdev,
|
|
|
|
"Unknown event was received or event with unimplemented handler\n");
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static struct ena_aenq_handlers aenq_handlers = {
|
|
|
|
.handlers = {
|
|
|
|
[ENA_ADMIN_LINK_CHANGE] = ena_update_on_link_change,
|
2019-05-30 13:09:53 +00:00
|
|
|
[ENA_ADMIN_NOTIFICATION] = ena_notification,
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
[ENA_ADMIN_KEEP_ALIVE] = ena_keep_alive_wd,
|
|
|
|
},
|
|
|
|
.unimplemented_handler = unimplemented_aenq_handler
|
|
|
|
};
|
|
|
|
|
|
|
|
/*********************************************************************
|
|
|
|
* FreeBSD Device Interface Entry Points
|
|
|
|
*********************************************************************/
|
|
|
|
|
|
|
|
static device_method_t ena_methods[] = {
|
|
|
|
/* Device interface */
|
|
|
|
DEVMETHOD(device_probe, ena_probe),
|
|
|
|
DEVMETHOD(device_attach, ena_attach),
|
|
|
|
DEVMETHOD(device_detach, ena_detach),
|
|
|
|
DEVMETHOD_END
|
|
|
|
};
|
|
|
|
|
|
|
|
static driver_t ena_driver = {
|
|
|
|
"ena", ena_methods, sizeof(struct ena_adapter),
|
|
|
|
};
|
|
|
|
|
|
|
|
devclass_t ena_devclass;
|
|
|
|
DRIVER_MODULE(ena, pci, ena_driver, ena_devclass, 0, 0);
|
2018-07-08 23:12:27 +00:00
|
|
|
MODULE_PNP_INFO("U16:vendor;U16:device", pci, ena, ena_vendor_info_array,
|
Reapply, with minor tweaks, r338025, from the original commit:
Remove unused and easy to misuse PNP macro parameter
Inspired by r338025, just remove the element size parameter to the
MODULE_PNP_INFO macro entirely. The 'table' parameter is now required to
have correct pointer (or array) type. Since all invocations of the macro
already had this property and the emitted PNP data continues to include the
element size, there is no functional change.
Mostly done with the coccinelle 'spatch' tool:
$ cat modpnpsize0.cocci
@normaltables@
identifier b,c;
expression a,d,e;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,d,
-sizeof(d[0]),
e);
@singletons@
identifier b,c,d;
expression a;
declarer MODULE_PNP_INFO;
@@
MODULE_PNP_INFO(a,b,c,&d,
-sizeof(d),
1);
$ rg -l MODULE_PNP_INFO -- sys | \
xargs spatch --in-place --sp-file modpnpsize0.cocci
(Note that coccinelle invokes diff(1) via a PATH search and expects diff to
tolerate the -B flag, which BSD diff does not. So I had to link gdiff into
PATH as diff to use spatch.)
Tinderbox'd (-DMAKE_JUST_KERNELS).
Approved by: re (glen)
2018-09-26 17:12:14 +00:00
|
|
|
nitems(ena_vendor_info_array) - 1);
|
Add support for Amazon Elastic Network Adapter (ENA) NIC
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
2017-05-22 14:46:13 +00:00
|
|
|
MODULE_DEPEND(ena, pci, 1, 1, 1);
|
|
|
|
MODULE_DEPEND(ena, ether, 1, 1, 1);
|
|
|
|
|
|
|
|
/*********************************************************************/
|