freebsd-skq/sys/modules/siis/Makefile

# $FreeBSD$

.PATH: ${SRCTOP}/sys/dev/siis

KMOD=	siis
SRCS=	siis.c siis.h device_if.h bus_if.h pci_if.h opt_cam.h

.include <bsd.kmod.mk>
Add `siis` CAM driver for SiliconImage SiI3124/3132/3531 SATA2 controllers. Driver supports Serial ATA and ATAPI devices, Port Multipliers (including FIS-based switching), hardware command queues (31 command per port) and Native Command Queuing. This is probably the second on popularity, after AHCI, type of SATA2 controllers, that benefits from using CAM, because of hardware command queuing support. Approved by: re (kib) 2009-07-21 12:32:46 +00:00			`# $FreeBSD$`

sys/modules: normalize .CURDIR-relative paths to SRCTOP This simplifies make output/logic Tested with: `cd sys/modules; make ALL_MODULES=` on amd64 MFC after: 1 month Sponsored by: Dell EMC Isilon 2017-03-04 10:10:17 +00:00			`.PATH: ${SRCTOP}/sys/dev/siis`
Add `siis` CAM driver for SiliconImage SiI3124/3132/3531 SATA2 controllers. Driver supports Serial ATA and ATAPI devices, Port Multipliers (including FIS-based switching), hardware command queues (31 command per port) and Native Command Queuing. This is probably the second on popularity, after AHCI, type of SATA2 controllers, that benefits from using CAM, because of hardware command queuing support. Approved by: re (kib) 2009-07-21 12:32:46 +00:00
			`KMOD= siis`
			`SRCS= siis.c siis.h device_if.h bus_if.h pci_if.h opt_cam.h`

			`.include <bsd.kmod.mk>`