freebsd-skq/sys/kern/uipc_usrreq.c

2597 lines
65 KiB
C
Raw Normal View History

/*-
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1989, 1991, 1993
* The Regents of the University of California.
* Copyright (c) 2004-2009 Robert N. M. Watson
* All rights reserved.
1994-05-24 10:09:53 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-24 10:09:53 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* From: @(#)uipc_usrreq.c 8.3 (Berkeley) 1/4/94
1994-05-24 10:09:53 +00:00
*/
/*
* UNIX Domain (Local) Sockets
*
* This is an implementation of UNIX (local) domain sockets. Each socket has
* an associated struct unpcb (UNIX protocol control block). Stream sockets
* may be connected to 0 or 1 other socket. Datagram sockets may be
* connected to 0, 1, or many other sockets. Sockets may be created and
* connected in pairs (socketpair(2)), or bound/connected to using the file
* system name space. For most purposes, only the receive socket buffer is
* used, as sending on one socket delivers directly to the receive socket
* buffer of a second socket.
*
* The implementation is substantially complicated by the fact that
* "ancillary data", such as file descriptors or credentials, may be passed
* across UNIX domain sockets. The potential for passing UNIX domain sockets
* over other UNIX domain sockets requires the implementation of a simple
* garbage collector to find and tear down cycles of disconnected sockets.
*
* TODO:
* RDM
* rethink name space problems
* need a proper out-of-band
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/capsicum.h>
#include <sys/domain.h>
#include <sys/fcntl.h>
#include <sys/malloc.h> /* XXX must be before <sys/file.h> */
#include <sys/eventhandler.h>
#include <sys/file.h>
#include <sys/filedesc.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mbuf.h>
#include <sys/mount.h>
#include <sys/mutex.h>
#include <sys/namei.h>
#include <sys/proc.h>
1994-05-24 10:09:53 +00:00
#include <sys/protosw.h>
#include <sys/queue.h>
#include <sys/resourcevar.h>
#include <sys/rwlock.h>
1994-05-24 10:09:53 +00:00
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/signalvar.h>
#include <sys/stat.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
Correct a number of serious and closely related bugs in the UNIX domain socket file descriptor garbage collection code, which is intended to detect and clear cycles of orphaned file descriptors that are "in-flight" in a socket when that socket is closed before they are received. The algorithm present was both run at poor times (resulting in recursion and reentrance), and also buggy in the presence of parallelism. In order to fix these problems, make the following changes: - When there are in-flight sockets and a UNIX domain socket is destroyed, asynchronously schedule the garbage collector, rather than running it synchronously in the current context. This avoids lock order issues when the garbage collection code reenters the UNIX domain socket code, avoiding lock order reversals, deadlocks, etc. Run the code asynchronously in a task queue. - In the garbage collector, when skipping file descriptors that have entered a closing state (i.e., have f_count == 0), re-test the FDEFER flag, and decrement unp_defer. As file descriptors can now transition to a closed state, while the garbage collector is running, it is no longer the case that unp_defer will remain an accurate count of deferred sockets in the mark portion of the GC algorithm. Otherwise, the garbage collector will loop waiting waiting for unp_defer to reach zero, which it will never do as it is skipping file descriptors that were marked in an earlier pass, but now closed. - Acquire the UNIX domain socket subsystem lock in unp_discard() when modifying the unp_rights counter, or a read/write race is risked with other threads also manipulating the counter. While here: - Remove #if 0'd code regarding acquiring the socket buffer sleep lock in the garbage collector, this is not required as we are able to use the socket buffer receive lock to protect scanning the receive buffer for in-flight file descriptors on the socket buffer. - Annotate that the description of the garbage collector implementation is increasingly inaccurate and needs to be updated. - Add counters of the number of deferred garbage collections and recycled file descriptors. This will be removed and is here temporarily for debugging purposes. With these changes in place, the unp_passfd regression test now appears to be passed consistently on UP and SMP systems for extended runs, whereas before it hung quickly or panicked, depending on which bug was triggered. Reported by: Philip Kizer <pckizer at nostrum dot com> MFC after: 2 weeks
2005-11-10 16:06:04 +00:00
#include <sys/taskqueue.h>
1994-05-24 10:09:53 +00:00
#include <sys/un.h>
#include <sys/unpcb.h>
1994-05-24 10:09:53 +00:00
#include <sys/vnode.h>
#include <net/vnet.h>
1994-05-24 10:09:53 +00:00
#ifdef DDB
#include <ddb/ddb.h>
#endif
#include <security/mac/mac_framework.h>
#include <vm/uma.h>
MALLOC_DECLARE(M_FILECAPS);
/*
* Locking key:
* (l) Locked using list lock
* (g) Locked using linkage lock
*/
static uma_zone_t unp_zone;
static unp_gen_t unp_gencnt; /* (l) */
static u_int unp_count; /* (l) Count of local sockets. */
static ino_t unp_ino; /* Prototype for fake inode numbers. */
static int unp_rights; /* (g) File descriptors in flight. */
static struct unp_head unp_shead; /* (l) List of stream sockets. */
static struct unp_head unp_dhead; /* (l) List of datagram sockets. */
static struct unp_head unp_sphead; /* (l) List of seqpacket sockets. */
struct unp_defer {
SLIST_ENTRY(unp_defer) ud_link;
struct file *ud_fp;
};
static SLIST_HEAD(, unp_defer) unp_defers;
static int unp_defers_count;
static const struct sockaddr sun_noname = { sizeof(sun_noname), AF_LOCAL };
1994-05-24 10:09:53 +00:00
/*
* Garbage collection of cyclic file descriptor/socket references occurs
* asynchronously in a taskqueue context in order to avoid recursion and
* reentrance in the UNIX domain socket, file descriptor, and socket layer
* code. See unp_gc() for a full description.
1994-05-24 10:09:53 +00:00
*/
static struct timeout_task unp_gc_task;
/*
* The close of unix domain sockets attached as SCM_RIGHTS is
* postponed to the taskqueue, to avoid arbitrary recursion depth.
* The attached sockets might have another sockets attached.
*/
static struct task unp_defer_task;
/*
* Both send and receive buffers are allocated PIPSIZ bytes of buffering for
* stream sockets, although the total for sender and receiver is actually
* only PIPSIZ.
*
* Datagram sockets really use the sendspace as the maximum datagram size,
* and don't really want to reserve the sendspace. Their recvspace should be
* large enough for at least one max-size datagram plus address.
*/
#ifndef PIPSIZ
#define PIPSIZ 8192
#endif
static u_long unpst_sendspace = PIPSIZ;
static u_long unpst_recvspace = PIPSIZ;
static u_long unpdg_sendspace = 2*1024; /* really max datagram size */
static u_long unpdg_recvspace = 4*1024;
static u_long unpsp_sendspace = PIPSIZ; /* really max datagram size */
static u_long unpsp_recvspace = PIPSIZ;
static SYSCTL_NODE(_net, PF_LOCAL, local, CTLFLAG_RW, 0, "Local domain");
static SYSCTL_NODE(_net_local, SOCK_STREAM, stream, CTLFLAG_RW, 0,
"SOCK_STREAM");
static SYSCTL_NODE(_net_local, SOCK_DGRAM, dgram, CTLFLAG_RW, 0, "SOCK_DGRAM");
static SYSCTL_NODE(_net_local, SOCK_SEQPACKET, seqpacket, CTLFLAG_RW, 0,
"SOCK_SEQPACKET");
SYSCTL_ULONG(_net_local_stream, OID_AUTO, sendspace, CTLFLAG_RW,
&unpst_sendspace, 0, "Default stream send space.");
SYSCTL_ULONG(_net_local_stream, OID_AUTO, recvspace, CTLFLAG_RW,
&unpst_recvspace, 0, "Default stream receive space.");
SYSCTL_ULONG(_net_local_dgram, OID_AUTO, maxdgram, CTLFLAG_RW,
&unpdg_sendspace, 0, "Default datagram send space.");
SYSCTL_ULONG(_net_local_dgram, OID_AUTO, recvspace, CTLFLAG_RW,
&unpdg_recvspace, 0, "Default datagram receive space.");
SYSCTL_ULONG(_net_local_seqpacket, OID_AUTO, maxseqpacket, CTLFLAG_RW,
&unpsp_sendspace, 0, "Default seqpacket send space.");
SYSCTL_ULONG(_net_local_seqpacket, OID_AUTO, recvspace, CTLFLAG_RW,
&unpsp_recvspace, 0, "Default seqpacket receive space.");
SYSCTL_INT(_net_local, OID_AUTO, inflight, CTLFLAG_RD, &unp_rights, 0,
"File descriptors in flight.");
SYSCTL_INT(_net_local, OID_AUTO, deferred, CTLFLAG_RD,
&unp_defers_count, 0,
"File descriptors deferred to taskqueue for close.");
/*
* Locking and synchronization:
*
* Three types of locks exit in the local domain socket implementation: a
* global list mutex, a global linkage rwlock, and per-unpcb mutexes. Of the
* global locks, the list lock protects the socket count, global generation
* number, and stream/datagram global lists. The linkage lock protects the
* interconnection of unpcbs, the v_socket and unp_vnode pointers, and can be
* held exclusively over the acquisition of multiple unpcb locks to prevent
* deadlock.
*
* UNIX domain sockets each have an unpcb hung off of their so_pcb pointer,
* allocated in pru_attach() and freed in pru_detach(). The validity of that
* pointer is an invariant, so no lock is required to dereference the so_pcb
* pointer if a valid socket reference is held by the caller. In practice,
* this is always true during operations performed on a socket. Each unpcb
* has a back-pointer to its socket, unp_socket, which will be stable under
* the same circumstances.
*
* This pointer may only be safely dereferenced as long as a valid reference
* to the unpcb is held. Typically, this reference will be from the socket,
* or from another unpcb when the referring unpcb's lock is held (in order
* that the reference not be invalidated during use). For example, to follow
* unp->unp_conn->unp_socket, you need unlock the lock on unp, not unp_conn,
* as unp_socket remains valid as long as the reference to unp_conn is valid.
*
* Fields of unpcbss are locked using a per-unpcb lock, unp_mtx. Individual
* atomic reads without the lock may be performed "lockless", but more
* complex reads and read-modify-writes require the mutex to be held. No
* lock order is defined between unpcb locks -- multiple unpcb locks may be
* acquired at the same time only when holding the linkage rwlock
* exclusively, which prevents deadlocks.
*
* Blocking with UNIX domain sockets is a tricky issue: unlike most network
* protocols, bind() is a non-atomic operation, and connect() requires
* potential sleeping in the protocol, due to potentially waiting on local or
* distributed file systems. We try to separate "lookup" operations, which
* may sleep, and the IPC operations themselves, which typically can occur
* with relative atomicity as locks can be held over the entire operation.
*
* Another tricky issue is simultaneous multi-threaded or multi-process
* access to a single UNIX domain socket. These are handled by the flags
* UNP_CONNECTING and UNP_BINDING, which prevent concurrent connecting or
* binding, both of which involve dropping UNIX domain socket locks in order
* to perform namei() and other file system operations.
*/
static struct rwlock unp_link_rwlock;
static struct mtx unp_list_lock;
static struct mtx unp_defers_lock;
#define UNP_LINK_LOCK_INIT() rw_init(&unp_link_rwlock, \
"unp_link_rwlock")
#define UNP_LINK_LOCK_ASSERT() rw_assert(&unp_link_rwlock, \
RA_LOCKED)
#define UNP_LINK_UNLOCK_ASSERT() rw_assert(&unp_link_rwlock, \
RA_UNLOCKED)
#define UNP_LINK_RLOCK() rw_rlock(&unp_link_rwlock)
#define UNP_LINK_RUNLOCK() rw_runlock(&unp_link_rwlock)
#define UNP_LINK_WLOCK() rw_wlock(&unp_link_rwlock)
#define UNP_LINK_WUNLOCK() rw_wunlock(&unp_link_rwlock)
#define UNP_LINK_WLOCK_ASSERT() rw_assert(&unp_link_rwlock, \
RA_WLOCKED)
#define UNP_LIST_LOCK_INIT() mtx_init(&unp_list_lock, \
"unp_list_lock", NULL, MTX_DEF)
#define UNP_LIST_LOCK() mtx_lock(&unp_list_lock)
#define UNP_LIST_UNLOCK() mtx_unlock(&unp_list_lock)
#define UNP_DEFERRED_LOCK_INIT() mtx_init(&unp_defers_lock, \
"unp_defer", NULL, MTX_DEF)
#define UNP_DEFERRED_LOCK() mtx_lock(&unp_defers_lock)
#define UNP_DEFERRED_UNLOCK() mtx_unlock(&unp_defers_lock)
#define UNP_PCB_LOCK_INIT(unp) mtx_init(&(unp)->unp_mtx, \
"unp_mtx", "unp_mtx", \
MTX_DUPOK|MTX_DEF|MTX_RECURSE)
#define UNP_PCB_LOCK_DESTROY(unp) mtx_destroy(&(unp)->unp_mtx)
#define UNP_PCB_LOCK(unp) mtx_lock(&(unp)->unp_mtx)
#define UNP_PCB_UNLOCK(unp) mtx_unlock(&(unp)->unp_mtx)
#define UNP_PCB_LOCK_ASSERT(unp) mtx_assert(&(unp)->unp_mtx, MA_OWNED)
static int uipc_connect2(struct socket *, struct socket *);
static int uipc_ctloutput(struct socket *, struct sockopt *);
static int unp_connect(struct socket *, struct sockaddr *,
struct thread *);
static int unp_connectat(int, struct socket *, struct sockaddr *,
struct thread *);
static int unp_connect2(struct socket *so, struct socket *so2, int);
static void unp_disconnect(struct unpcb *unp, struct unpcb *unp2);
static void unp_dispose(struct socket *so);
static void unp_dispose_mbuf(struct mbuf *);
static void unp_shutdown(struct unpcb *);
static void unp_drop(struct unpcb *);
static void unp_gc(__unused void *, int);
static void unp_scan(struct mbuf *, void (*)(struct filedescent **, int));
static void unp_discard(struct file *);
static void unp_freerights(struct filedescent **, int);
static void unp_init(void);
static int unp_internalize(struct mbuf **, struct thread *);
static void unp_internalize_fp(struct file *);
static int unp_externalize(struct mbuf *, struct mbuf **, int);
static int unp_externalize_fp(struct file *);
static struct mbuf *unp_addsockcred(struct thread *, struct mbuf *);
static void unp_process_defers(void * __unused, int);
/*
* Definitions of protocols supported in the LOCAL domain.
*/
static struct domain localdomain;
static struct pr_usrreqs uipc_usrreqs_dgram, uipc_usrreqs_stream;
static struct pr_usrreqs uipc_usrreqs_seqpacket;
static struct protosw localsw[] = {
{
.pr_type = SOCK_STREAM,
.pr_domain = &localdomain,
.pr_flags = PR_CONNREQUIRED|PR_WANTRCVD|PR_RIGHTS,
.pr_ctloutput = &uipc_ctloutput,
.pr_usrreqs = &uipc_usrreqs_stream
},
{
.pr_type = SOCK_DGRAM,
.pr_domain = &localdomain,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_RIGHTS,
.pr_ctloutput = &uipc_ctloutput,
.pr_usrreqs = &uipc_usrreqs_dgram
},
{
.pr_type = SOCK_SEQPACKET,
.pr_domain = &localdomain,
/*
* XXXRW: For now, PR_ADDR because soreceive will bump into them
* due to our use of sbappendaddr. A new sbappend variants is needed
* that supports both atomic record writes and control data.
*/
.pr_flags = PR_ADDR|PR_ATOMIC|PR_CONNREQUIRED|PR_WANTRCVD|
PR_RIGHTS,
.pr_ctloutput = &uipc_ctloutput,
.pr_usrreqs = &uipc_usrreqs_seqpacket,
},
};
static struct domain localdomain = {
.dom_family = AF_LOCAL,
.dom_name = "local",
.dom_init = unp_init,
.dom_externalize = unp_externalize,
.dom_dispose = unp_dispose,
.dom_protosw = localsw,
.dom_protoswNPROTOSW = &localsw[nitems(localsw)]
};
DOMAIN_SET(local);
static void
uipc_abort(struct socket *so)
{
struct unpcb *unp, *unp2;
1994-05-24 10:09:53 +00:00
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_abort: unp == NULL"));
UNP_LINK_WLOCK();
UNP_PCB_LOCK(unp);
unp2 = unp->unp_conn;
if (unp2 != NULL) {
UNP_PCB_LOCK(unp2);
unp_drop(unp2);
UNP_PCB_UNLOCK(unp2);
}
UNP_PCB_UNLOCK(unp);
UNP_LINK_WUNLOCK();
}
static int
uipc_accept(struct socket *so, struct sockaddr **nam)
1994-05-24 10:09:53 +00:00
{
struct unpcb *unp, *unp2;
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
const struct sockaddr *sa;
1994-05-24 10:09:53 +00:00
/*
* Pass back name of connected socket, if it was bound and we are
* still connected (our peer may have closed already!).
*/
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_accept: unp == NULL"));
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
*nam = malloc(sizeof(struct sockaddr_un), M_SONAME, M_WAITOK);
UNP_LINK_RLOCK();
unp2 = unp->unp_conn;
if (unp2 != NULL && unp2->unp_addr != NULL) {
UNP_PCB_LOCK(unp2);
sa = (struct sockaddr *) unp2->unp_addr;
bcopy(sa, *nam, sa->sa_len);
UNP_PCB_UNLOCK(unp2);
} else {
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
sa = &sun_noname;
bcopy(sa, *nam, sa->sa_len);
}
UNP_LINK_RUNLOCK();
return (0);
}
1994-05-24 10:09:53 +00:00
static int
uipc_attach(struct socket *so, int proto, struct thread *td)
{
u_long sendspace, recvspace;
struct unpcb *unp;
int error;
KASSERT(so->so_pcb == NULL, ("uipc_attach: so_pcb != NULL"));
if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
switch (so->so_type) {
case SOCK_STREAM:
sendspace = unpst_sendspace;
recvspace = unpst_recvspace;
break;
case SOCK_DGRAM:
sendspace = unpdg_sendspace;
recvspace = unpdg_recvspace;
break;
case SOCK_SEQPACKET:
sendspace = unpsp_sendspace;
recvspace = unpsp_recvspace;
break;
default:
panic("uipc_attach");
}
error = soreserve(so, sendspace, recvspace);
if (error)
return (error);
}
unp = uma_zalloc(unp_zone, M_NOWAIT | M_ZERO);
if (unp == NULL)
return (ENOBUFS);
LIST_INIT(&unp->unp_refs);
UNP_PCB_LOCK_INIT(unp);
unp->unp_socket = so;
so->so_pcb = unp;
unp->unp_refcount = 1;
if (so->so_head != NULL)
unp->unp_flags |= UNP_NASCENT;
UNP_LIST_LOCK();
unp->unp_gencnt = ++unp_gencnt;
unp_count++;
switch (so->so_type) {
case SOCK_STREAM:
LIST_INSERT_HEAD(&unp_shead, unp, unp_link);
break;
case SOCK_DGRAM:
LIST_INSERT_HEAD(&unp_dhead, unp, unp_link);
break;
case SOCK_SEQPACKET:
LIST_INSERT_HEAD(&unp_sphead, unp, unp_link);
break;
default:
panic("uipc_attach");
}
UNP_LIST_UNLOCK();
return (0);
}
1994-05-24 10:09:53 +00:00
static int
uipc_bindat(int fd, struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct sockaddr_un *soun = (struct sockaddr_un *)nam;
struct vattr vattr;
int error, namelen;
struct nameidata nd;
struct unpcb *unp;
struct vnode *vp;
struct mount *mp;
Change the cap_rights_t type from uint64_t to a structure that we can extend in the future in a backward compatible (API and ABI) way. The cap_rights_t represents capability rights. We used to use one bit to represent one right, but we are running out of spare bits. Currently the new structure provides place for 114 rights (so 50 more than the previous cap_rights_t), but it is possible to grow the structure to hold at least 285 rights, although we can make it even larger if 285 rights won't be enough. The structure definition looks like this: struct cap_rights { uint64_t cr_rights[CAP_RIGHTS_VERSION + 2]; }; The initial CAP_RIGHTS_VERSION is 0. The top two bits in the first element of the cr_rights[] array contain total number of elements in the array - 2. This means if those two bits are equal to 0, we have 2 array elements. The top two bits in all remaining array elements should be 0. The next five bits in all array elements contain array index. Only one bit is used and bit position in this five-bits range defines array index. This means there can be at most five array elements in the future. To define new right the CAPRIGHT() macro must be used. The macro takes two arguments - an array index and a bit to set, eg. #define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL) We still support aliases that combine few rights, but the rights have to belong to the same array element, eg: #define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL) #define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL) #define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP) There is new API to manage the new cap_rights_t structure: cap_rights_t *cap_rights_init(cap_rights_t *rights, ...); void cap_rights_set(cap_rights_t *rights, ...); void cap_rights_clear(cap_rights_t *rights, ...); bool cap_rights_is_set(const cap_rights_t *rights, ...); bool cap_rights_is_valid(const cap_rights_t *rights); void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src); void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src); bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little); Capability rights to the cap_rights_init(), cap_rights_set(), cap_rights_clear() and cap_rights_is_set() functions are provided by separating them with commas, eg: cap_rights_t rights; cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT); There is no need to terminate the list of rights, as those functions are actually macros that take care of the termination, eg: #define cap_rights_set(rights, ...) \ __cap_rights_set((rights), __VA_ARGS__, 0ULL) void __cap_rights_set(cap_rights_t *rights, ...); Thanks to using one bit as an array index we can assert in those functions that there are no two rights belonging to different array elements provided together. For example this is illegal and will be detected, because CAP_LOOKUP belongs to element 0 and CAP_PDKILL to element 1: cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL); Providing several rights that belongs to the same array's element this way is correct, but is not advised. It should only be used for aliases definition. This commit also breaks compatibility with some existing Capsicum system calls, but I see no other way to do that. This should be fine as Capsicum is still experimental and this change is not going to 9.x. Sponsored by: The FreeBSD Foundation
2013-09-05 00:09:56 +00:00
cap_rights_t rights;
char *buf;
1994-05-24 10:09:53 +00:00
if (nam->sa_family != AF_UNIX)
return (EAFNOSUPPORT);
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_bind: unp == NULL"));
if (soun->sun_len > sizeof(struct sockaddr_un))
return (EINVAL);
namelen = soun->sun_len - offsetof(struct sockaddr_un, sun_path);
if (namelen <= 0)
return (EINVAL);
/*
* We don't allow simultaneous bind() calls on a single UNIX domain
* socket, so flag in-progress operations, and return an error if an
* operation is already in progress.
*
* Historically, we have not allowed a socket to be rebound, so this
* also returns an error. Not allowing re-binding simplifies the
* implementation and avoids a great many possible failure modes.
*/
UNP_PCB_LOCK(unp);
if (unp->unp_vnode != NULL) {
UNP_PCB_UNLOCK(unp);
return (EINVAL);
}
if (unp->unp_flags & UNP_BINDING) {
UNP_PCB_UNLOCK(unp);
return (EALREADY);
}
unp->unp_flags |= UNP_BINDING;
UNP_PCB_UNLOCK(unp);
buf = malloc(namelen + 1, M_TEMP, M_WAITOK);
bcopy(soun->sun_path, buf, namelen);
buf[namelen] = 0;
restart:
NDINIT_ATRIGHTS(&nd, CREATE, NOFOLLOW | LOCKPARENT | SAVENAME | NOCACHE,
Change the cap_rights_t type from uint64_t to a structure that we can extend in the future in a backward compatible (API and ABI) way. The cap_rights_t represents capability rights. We used to use one bit to represent one right, but we are running out of spare bits. Currently the new structure provides place for 114 rights (so 50 more than the previous cap_rights_t), but it is possible to grow the structure to hold at least 285 rights, although we can make it even larger if 285 rights won't be enough. The structure definition looks like this: struct cap_rights { uint64_t cr_rights[CAP_RIGHTS_VERSION + 2]; }; The initial CAP_RIGHTS_VERSION is 0. The top two bits in the first element of the cr_rights[] array contain total number of elements in the array - 2. This means if those two bits are equal to 0, we have 2 array elements. The top two bits in all remaining array elements should be 0. The next five bits in all array elements contain array index. Only one bit is used and bit position in this five-bits range defines array index. This means there can be at most five array elements in the future. To define new right the CAPRIGHT() macro must be used. The macro takes two arguments - an array index and a bit to set, eg. #define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL) We still support aliases that combine few rights, but the rights have to belong to the same array element, eg: #define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL) #define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL) #define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP) There is new API to manage the new cap_rights_t structure: cap_rights_t *cap_rights_init(cap_rights_t *rights, ...); void cap_rights_set(cap_rights_t *rights, ...); void cap_rights_clear(cap_rights_t *rights, ...); bool cap_rights_is_set(const cap_rights_t *rights, ...); bool cap_rights_is_valid(const cap_rights_t *rights); void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src); void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src); bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little); Capability rights to the cap_rights_init(), cap_rights_set(), cap_rights_clear() and cap_rights_is_set() functions are provided by separating them with commas, eg: cap_rights_t rights; cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT); There is no need to terminate the list of rights, as those functions are actually macros that take care of the termination, eg: #define cap_rights_set(rights, ...) \ __cap_rights_set((rights), __VA_ARGS__, 0ULL) void __cap_rights_set(cap_rights_t *rights, ...); Thanks to using one bit as an array index we can assert in those functions that there are no two rights belonging to different array elements provided together. For example this is illegal and will be detected, because CAP_LOOKUP belongs to element 0 and CAP_PDKILL to element 1: cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL); Providing several rights that belongs to the same array's element this way is correct, but is not advised. It should only be used for aliases definition. This commit also breaks compatibility with some existing Capsicum system calls, but I see no other way to do that. This should be fine as Capsicum is still experimental and this change is not going to 9.x. Sponsored by: The FreeBSD Foundation
2013-09-05 00:09:56 +00:00
UIO_SYSSPACE, buf, fd, cap_rights_init(&rights, CAP_BINDAT), td);
/* SHOULD BE ABLE TO ADOPT EXISTING AND wakeup() ALA FIFO's */
error = namei(&nd);
if (error)
goto error;
vp = nd.ni_vp;
if (vp != NULL || vn_start_write(nd.ni_dvp, &mp, V_NOWAIT) != 0) {
NDFREE(&nd, NDF_ONLY_PNBUF);
if (nd.ni_dvp == vp)
vrele(nd.ni_dvp);
else
vput(nd.ni_dvp);
if (vp != NULL) {
vrele(vp);
error = EADDRINUSE;
goto error;
}
error = vn_start_write(NULL, &mp, V_XSLEEP | PCATCH);
if (error)
goto error;
goto restart;
}
VATTR_NULL(&vattr);
vattr.va_type = VSOCK;
vattr.va_mode = (ACCESSPERMS & ~td->td_proc->p_fd->fd_cmask);
#ifdef MAC
error = mac_vnode_check_create(td->td_ucred, nd.ni_dvp, &nd.ni_cnd,
&vattr);
#endif
if (error == 0)
error = VOP_CREATE(nd.ni_dvp, &nd.ni_vp, &nd.ni_cnd, &vattr);
NDFREE(&nd, NDF_ONLY_PNBUF);
vput(nd.ni_dvp);
if (error) {
vn_finished_write(mp);
goto error;
}
vp = nd.ni_vp;
ASSERT_VOP_ELOCKED(vp, "uipc_bind");
soun = (struct sockaddr_un *)sodupsockaddr(nam, M_WAITOK);
UNP_LINK_WLOCK();
UNP_PCB_LOCK(unp);
VOP_UNP_BIND(vp, unp->unp_socket);
unp->unp_vnode = vp;
unp->unp_addr = soun;
unp->unp_flags &= ~UNP_BINDING;
UNP_PCB_UNLOCK(unp);
UNP_LINK_WUNLOCK();
VOP_UNLOCK(vp, 0);
vn_finished_write(mp);
free(buf, M_TEMP);
return (0);
error:
UNP_PCB_LOCK(unp);
unp->unp_flags &= ~UNP_BINDING;
UNP_PCB_UNLOCK(unp);
free(buf, M_TEMP);
return (error);
}
1994-05-24 10:09:53 +00:00
static int
uipc_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
return (uipc_bindat(AT_FDCWD, so, nam, td));
}
static int
uipc_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
{
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
int error;
1994-05-24 10:09:53 +00:00
KASSERT(td == curthread, ("uipc_connect: td != curthread"));
UNP_LINK_WLOCK();
error = unp_connect(so, nam, td);
UNP_LINK_WUNLOCK();
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
return (error);
}
1994-05-24 10:09:53 +00:00
static int
uipc_connectat(int fd, struct socket *so, struct sockaddr *nam,
struct thread *td)
{
int error;
KASSERT(td == curthread, ("uipc_connectat: td != curthread"));
UNP_LINK_WLOCK();
error = unp_connectat(fd, so, nam, td);
UNP_LINK_WUNLOCK();
return (error);
}
static void
uipc_close(struct socket *so)
{
struct unpcb *unp, *unp2;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_close: unp == NULL"));
UNP_LINK_WLOCK();
UNP_PCB_LOCK(unp);
unp2 = unp->unp_conn;
if (unp2 != NULL) {
UNP_PCB_LOCK(unp2);
unp_disconnect(unp, unp2);
UNP_PCB_UNLOCK(unp2);
}
UNP_PCB_UNLOCK(unp);
UNP_LINK_WUNLOCK();
}
static int
uipc_connect2(struct socket *so1, struct socket *so2)
{
struct unpcb *unp, *unp2;
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
int error;
1994-05-24 10:09:53 +00:00
UNP_LINK_WLOCK();
unp = so1->so_pcb;
KASSERT(unp != NULL, ("uipc_connect2: unp == NULL"));
UNP_PCB_LOCK(unp);
unp2 = so2->so_pcb;
KASSERT(unp2 != NULL, ("uipc_connect2: unp2 == NULL"));
UNP_PCB_LOCK(unp2);
error = unp_connect2(so1, so2, PRU_CONNECT2);
UNP_PCB_UNLOCK(unp2);
UNP_PCB_UNLOCK(unp);
UNP_LINK_WUNLOCK();
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
return (error);
}
1994-05-24 10:09:53 +00:00
static void
uipc_detach(struct socket *so)
{
struct unpcb *unp, *unp2;
struct sockaddr_un *saved_unp_addr;
struct vnode *vp;
int freeunp, local_unp_rights;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_detach: unp == NULL"));
vp = NULL;
local_unp_rights = 0;
UNP_LIST_LOCK();
LIST_REMOVE(unp, unp_link);
unp->unp_gencnt = ++unp_gencnt;
--unp_count;
UNP_LIST_UNLOCK();
if ((unp->unp_flags & UNP_NASCENT) != 0) {
UNP_PCB_LOCK(unp);
goto teardown;
}
UNP_LINK_WLOCK();
UNP_PCB_LOCK(unp);
/*
* XXXRW: Should assert vp->v_socket == so.
*/
if ((vp = unp->unp_vnode) != NULL) {
VOP_UNP_DETACH(vp);
unp->unp_vnode = NULL;
}
unp2 = unp->unp_conn;
if (unp2 != NULL) {
UNP_PCB_LOCK(unp2);
unp_disconnect(unp, unp2);
UNP_PCB_UNLOCK(unp2);
}
/*
* We hold the linkage lock exclusively, so it's OK to acquire
* multiple pcb locks at a time.
*/
while (!LIST_EMPTY(&unp->unp_refs)) {
struct unpcb *ref = LIST_FIRST(&unp->unp_refs);
UNP_PCB_LOCK(ref);
unp_drop(ref);
UNP_PCB_UNLOCK(ref);
}
local_unp_rights = unp_rights;
UNP_LINK_WUNLOCK();
teardown:
unp->unp_socket->so_pcb = NULL;
saved_unp_addr = unp->unp_addr;
unp->unp_addr = NULL;
unp->unp_refcount--;
freeunp = (unp->unp_refcount == 0);
if (saved_unp_addr != NULL)
free(saved_unp_addr, M_SONAME);
if (freeunp) {
UNP_PCB_LOCK_DESTROY(unp);
uma_zfree(unp_zone, unp);
} else
UNP_PCB_UNLOCK(unp);
if (vp)
vrele(vp);
if (local_unp_rights)
taskqueue_enqueue_timeout(taskqueue_thread, &unp_gc_task, -1);
}
static int
uipc_disconnect(struct socket *so)
{
struct unpcb *unp, *unp2;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_disconnect: unp == NULL"));
UNP_LINK_WLOCK();
UNP_PCB_LOCK(unp);
unp2 = unp->unp_conn;
if (unp2 != NULL) {
UNP_PCB_LOCK(unp2);
unp_disconnect(unp, unp2);
UNP_PCB_UNLOCK(unp2);
}
UNP_PCB_UNLOCK(unp);
UNP_LINK_WUNLOCK();
return (0);
}
static int
uipc_listen(struct socket *so, int backlog, struct thread *td)
{
struct unpcb *unp;
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
int error;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_listen: unp == NULL"));
UNP_PCB_LOCK(unp);
if (unp->unp_vnode == NULL) {
/* Already connected or not bound to an address. */
error = unp->unp_conn != NULL ? EINVAL : EDESTADDRREQ;
UNP_PCB_UNLOCK(unp);
return (error);
}
SOCK_LOCK(so);
error = solisten_proto_check(so);
if (error == 0) {
cru2x(td->td_ucred, &unp->unp_peercred);
unp->unp_flags |= UNP_HAVEPCCACHED;
solisten_proto(so, backlog);
}
SOCK_UNLOCK(so);
UNP_PCB_UNLOCK(unp);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
return (error);
}
static int
uipc_peeraddr(struct socket *so, struct sockaddr **nam)
{
struct unpcb *unp, *unp2;
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
const struct sockaddr *sa;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_peeraddr: unp == NULL"));
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
*nam = malloc(sizeof(struct sockaddr_un), M_SONAME, M_WAITOK);
UNP_LINK_RLOCK();
/*
* XXX: It seems that this test always fails even when connection is
* established. So, this else clause is added as workaround to
* return PF_LOCAL sockaddr.
*/
unp2 = unp->unp_conn;
if (unp2 != NULL) {
UNP_PCB_LOCK(unp2);
if (unp2->unp_addr != NULL)
sa = (struct sockaddr *) unp2->unp_addr;
else
sa = &sun_noname;
bcopy(sa, *nam, sa->sa_len);
UNP_PCB_UNLOCK(unp2);
} else {
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
sa = &sun_noname;
bcopy(sa, *nam, sa->sa_len);
}
UNP_LINK_RUNLOCK();
return (0);
}
static int
uipc_rcvd(struct socket *so, int flags)
{
struct unpcb *unp, *unp2;
struct socket *so2;
u_int mbcnt, sbcc;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("%s: unp == NULL", __func__));
KASSERT(so->so_type == SOCK_STREAM || so->so_type == SOCK_SEQPACKET,
("%s: socktype %d", __func__, so->so_type));
/*
* Adjust backpressure on sender and wakeup any waiting to write.
*
* The unp lock is acquired to maintain the validity of the unp_conn
* pointer; no lock on unp2 is required as unp2->unp_socket will be
* static as long as we don't permit unp2 to disconnect from unp,
* which is prevented by the lock on unp. We cache values from
* so_rcv to avoid holding the so_rcv lock over the entire
* transaction on the remote so_snd.
*/
SOCKBUF_LOCK(&so->so_rcv);
mbcnt = so->so_rcv.sb_mbcnt;
sbcc = sbavail(&so->so_rcv);
SOCKBUF_UNLOCK(&so->so_rcv);
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically changed the sending sockbuf's high water mark whenever adding or removing data from the receiving sockbuf. It worked for stream sockets, but it never worked for SOCK_SEQPACKET sockets because of their atomic nature. If the sockbuf was partially full, it might return EMSGSIZE instead of blocking. The new solution is based on DragonFlyBSD's fix from commit 3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that sockbuf, causing sosend_generic and friends to block. uipc_rcvd will likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no longer need to call chgsbsize() on every send and receive because they don't change the sockbuf's high water mark. Also, uipc_sense no longer needs to acquire the UIPC linkage lock, because it's simpler to compute the st_blksizes. There is one drawback: since sbspace() will only ever return 0 or the maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum size by at most one packet of size less than the max. I don't think that's a serious problem. In fact, I'm not even positive that FreeBSD guarantees a socket will always stay within its nominal size limit. sys/sys/sockbuf.h Add the SB_STOP flag and adjust sbspace() sys/sys/unpcb.h Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb. sys/kern/uipc_usrreq.c Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP backpressure mechanism. Removing obsolete unpcb fields from db_show_unpcb. tests/sys/kern/unix_seqpacket_test.c Clear expected failures from ATF. Obtained from: DragonFly BSD PR: kern/185812 Reviewed by: silence from freebsd-net@ and rwatson@ MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
2014-03-13 18:42:12 +00:00
/*
* There is a benign race condition at this point. If we're planning to
* clear SB_STOP, but uipc_send is called on the connected socket at
* this instant, it might add data to the sockbuf and set SB_STOP. Then
* we would erroneously clear SB_STOP below, even though the sockbuf is
* full. The race is benign because the only ill effect is to allow the
* sockbuf to exceed its size limit, and the size limits are not
* strictly guaranteed anyway.
*/
UNP_PCB_LOCK(unp);
unp2 = unp->unp_conn;
if (unp2 == NULL) {
UNP_PCB_UNLOCK(unp);
return (0);
}
so2 = unp2->unp_socket;
SOCKBUF_LOCK(&so2->so_snd);
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically changed the sending sockbuf's high water mark whenever adding or removing data from the receiving sockbuf. It worked for stream sockets, but it never worked for SOCK_SEQPACKET sockets because of their atomic nature. If the sockbuf was partially full, it might return EMSGSIZE instead of blocking. The new solution is based on DragonFlyBSD's fix from commit 3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that sockbuf, causing sosend_generic and friends to block. uipc_rcvd will likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no longer need to call chgsbsize() on every send and receive because they don't change the sockbuf's high water mark. Also, uipc_sense no longer needs to acquire the UIPC linkage lock, because it's simpler to compute the st_blksizes. There is one drawback: since sbspace() will only ever return 0 or the maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum size by at most one packet of size less than the max. I don't think that's a serious problem. In fact, I'm not even positive that FreeBSD guarantees a socket will always stay within its nominal size limit. sys/sys/sockbuf.h Add the SB_STOP flag and adjust sbspace() sys/sys/unpcb.h Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb. sys/kern/uipc_usrreq.c Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP backpressure mechanism. Removing obsolete unpcb fields from db_show_unpcb. tests/sys/kern/unix_seqpacket_test.c Clear expected failures from ATF. Obtained from: DragonFly BSD PR: kern/185812 Reviewed by: silence from freebsd-net@ and rwatson@ MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
2014-03-13 18:42:12 +00:00
if (sbcc < so2->so_snd.sb_hiwat && mbcnt < so2->so_snd.sb_mbmax)
so2->so_snd.sb_flags &= ~SB_STOP;
sowwakeup_locked(so2);
UNP_PCB_UNLOCK(unp);
return (0);
}
1994-05-24 10:09:53 +00:00
static int
uipc_send(struct socket *so, int flags, struct mbuf *m, struct sockaddr *nam,
struct mbuf *control, struct thread *td)
{
struct unpcb *unp, *unp2;
struct socket *so2;
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically changed the sending sockbuf's high water mark whenever adding or removing data from the receiving sockbuf. It worked for stream sockets, but it never worked for SOCK_SEQPACKET sockets because of their atomic nature. If the sockbuf was partially full, it might return EMSGSIZE instead of blocking. The new solution is based on DragonFlyBSD's fix from commit 3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that sockbuf, causing sosend_generic and friends to block. uipc_rcvd will likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no longer need to call chgsbsize() on every send and receive because they don't change the sockbuf's high water mark. Also, uipc_sense no longer needs to acquire the UIPC linkage lock, because it's simpler to compute the st_blksizes. There is one drawback: since sbspace() will only ever return 0 or the maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum size by at most one packet of size less than the max. I don't think that's a serious problem. In fact, I'm not even positive that FreeBSD guarantees a socket will always stay within its nominal size limit. sys/sys/sockbuf.h Add the SB_STOP flag and adjust sbspace() sys/sys/unpcb.h Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb. sys/kern/uipc_usrreq.c Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP backpressure mechanism. Removing obsolete unpcb fields from db_show_unpcb. tests/sys/kern/unix_seqpacket_test.c Clear expected failures from ATF. Obtained from: DragonFly BSD PR: kern/185812 Reviewed by: silence from freebsd-net@ and rwatson@ MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
2014-03-13 18:42:12 +00:00
u_int mbcnt, sbcc;
int error = 0;
1994-05-24 10:09:53 +00:00
unp = sotounpcb(so);
KASSERT(unp != NULL, ("%s: unp == NULL", __func__));
KASSERT(so->so_type == SOCK_STREAM || so->so_type == SOCK_DGRAM ||
so->so_type == SOCK_SEQPACKET,
("%s: socktype %d", __func__, so->so_type));
if (flags & PRUS_OOB) {
error = EOPNOTSUPP;
goto release;
}
if (control != NULL && (error = unp_internalize(&control, td)))
goto release;
if ((nam != NULL) || (flags & PRUS_EOF))
UNP_LINK_WLOCK();
else
UNP_LINK_RLOCK();
switch (so->so_type) {
case SOCK_DGRAM:
{
const struct sockaddr *from;
1995-05-30 08:16:23 +00:00
unp2 = unp->unp_conn;
if (nam != NULL) {
UNP_LINK_WLOCK_ASSERT();
if (unp2 != NULL) {
error = EISCONN;
break;
}
error = unp_connect(so, nam, td);
if (error)
break;
unp2 = unp->unp_conn;
}
/*
* Because connect() and send() are non-atomic in a sendto()
* with a target address, it's possible that the socket will
* have disconnected before the send() can run. In that case
* return the slightly counter-intuitive but otherwise
* correct error that the socket is not connected.
*/
if (unp2 == NULL) {
error = ENOTCONN;
break;
}
/* Lockless read. */
if (unp2->unp_flags & UNP_WANTCRED)
control = unp_addsockcred(td, control);
UNP_PCB_LOCK(unp);
if (unp->unp_addr != NULL)
from = (struct sockaddr *)unp->unp_addr;
else
from = &sun_noname;
so2 = unp2->unp_socket;
Merge next step in socket buffer locking: - sowakeup() now asserts the socket buffer lock on entry. Move the call to KNOTE higher in sowakeup() so that it is made with the socket buffer lock held for consistency with other calls. Release the socket buffer lock prior to calling into pgsigio(), so_upcall(), or aio_swake(). Locking for this event management will need revisiting in the future, but this model avoids lock order reversals when upcalls into other subsystems result in socket/socket buffer operations. Assert that the socket buffer lock is not held at the end of the function. - Wrapper macros for sowakeup(), sorwakeup() and sowwakeup(), now have _locked versions which assert the socket buffer lock on entry. If a wakeup is required by sb_notify(), invoke sowakeup(); otherwise, unconditionally release the socket buffer lock. This results in the socket buffer lock being released whether a wakeup is required or not. - Break out socantsendmore() into socantsendmore_locked() that asserts the socket buffer lock. socantsendmore() unconditionally locks the socket buffer before calling socantsendmore_locked(). Note that both functions return with the socket buffer unlocked as socantsendmore_locked() calls sowwakeup_locked() which has the same properties. Assert that the socket buffer is unlocked on return. - Break out socantrcvmore() into socantrcvmore_locked() that asserts the socket buffer lock. socantrcvmore() unconditionally locks the socket buffer before calling socantrcvmore_locked(). Note that both functions return with the socket buffer unlocked as socantrcvmore_locked() calls sorwakeup_locked() which has similar properties. Assert that the socket buffer is unlocked on return. - Break out sbrelease() into a sbrelease_locked() that asserts the socket buffer lock. sbrelease() unconditionally locks the socket buffer before calling sbrelease_locked(). sbrelease_locked() now invokes sbflush_locked() instead of sbflush(). - Assert the socket buffer lock in socket buffer sanity check functions sblastrecordchk(), sblastmbufchk(). - Assert the socket buffer lock in SBLINKRECORD(). - Break out various sbappend() functions into sbappend_locked() (and variations on that name) that assert the socket buffer lock. The !_locked() variations unconditionally lock the socket buffer before calling their _locked counterparts. Internally, make sure to call _locked() support routines, etc, if already holding the socket buffer lock. - Break out sbinsertoob() into sbinsertoob_locked() that asserts the socket buffer lock. sbinsertoob() unconditionally locks the socket buffer before calling sbinsertoob_locked(). - Break out sbflush() into sbflush_locked() that asserts the socket buffer lock. sbflush() unconditionally locks the socket buffer before calling sbflush_locked(). Update panic strings for new function names. - Break out sbdrop() into sbdrop_locked() that asserts the socket buffer lock. sbdrop() unconditionally locks the socket buffer before calling sbdrop_locked(). - Break out sbdroprecord() into sbdroprecord_locked() that asserts the socket buffer lock. sbdroprecord() unconditionally locks the socket buffer before calling sbdroprecord_locked(). - sofree() now calls socantsendmore_locked() and re-acquires the socket buffer lock on return. It also now calls sbrelease_locked(). - sorflush() now calls socantrcvmore_locked() and re-acquires the socket buffer lock on return. Clean up/mess up other behavior in sorflush() relating to the temporary stack copy of the socket buffer used with dom_dispose by more properly initializing the temporary copy, and selectively bzeroing/copying more carefully to prevent WITNESS from getting confused by improperly initialized mutexes. Annotate why that's necessary, or at least, needed. - soisconnected() now calls sbdrop_locked() before unlocking the socket buffer to avoid locking overhead. Some parts of this change were: Submitted by: sam Sponsored by: FreeBSD Foundation Obtained from: BSD/OS
2004-06-21 00:20:43 +00:00
SOCKBUF_LOCK(&so2->so_rcv);
if (sbappendaddr_locked(&so2->so_rcv, from, m,
control)) {
sorwakeup_locked(so2);
m = NULL;
control = NULL;
} else {
Merge next step in socket buffer locking: - sowakeup() now asserts the socket buffer lock on entry. Move the call to KNOTE higher in sowakeup() so that it is made with the socket buffer lock held for consistency with other calls. Release the socket buffer lock prior to calling into pgsigio(), so_upcall(), or aio_swake(). Locking for this event management will need revisiting in the future, but this model avoids lock order reversals when upcalls into other subsystems result in socket/socket buffer operations. Assert that the socket buffer lock is not held at the end of the function. - Wrapper macros for sowakeup(), sorwakeup() and sowwakeup(), now have _locked versions which assert the socket buffer lock on entry. If a wakeup is required by sb_notify(), invoke sowakeup(); otherwise, unconditionally release the socket buffer lock. This results in the socket buffer lock being released whether a wakeup is required or not. - Break out socantsendmore() into socantsendmore_locked() that asserts the socket buffer lock. socantsendmore() unconditionally locks the socket buffer before calling socantsendmore_locked(). Note that both functions return with the socket buffer unlocked as socantsendmore_locked() calls sowwakeup_locked() which has the same properties. Assert that the socket buffer is unlocked on return. - Break out socantrcvmore() into socantrcvmore_locked() that asserts the socket buffer lock. socantrcvmore() unconditionally locks the socket buffer before calling socantrcvmore_locked(). Note that both functions return with the socket buffer unlocked as socantrcvmore_locked() calls sorwakeup_locked() which has similar properties. Assert that the socket buffer is unlocked on return. - Break out sbrelease() into a sbrelease_locked() that asserts the socket buffer lock. sbrelease() unconditionally locks the socket buffer before calling sbrelease_locked(). sbrelease_locked() now invokes sbflush_locked() instead of sbflush(). - Assert the socket buffer lock in socket buffer sanity check functions sblastrecordchk(), sblastmbufchk(). - Assert the socket buffer lock in SBLINKRECORD(). - Break out various sbappend() functions into sbappend_locked() (and variations on that name) that assert the socket buffer lock. The !_locked() variations unconditionally lock the socket buffer before calling their _locked counterparts. Internally, make sure to call _locked() support routines, etc, if already holding the socket buffer lock. - Break out sbinsertoob() into sbinsertoob_locked() that asserts the socket buffer lock. sbinsertoob() unconditionally locks the socket buffer before calling sbinsertoob_locked(). - Break out sbflush() into sbflush_locked() that asserts the socket buffer lock. sbflush() unconditionally locks the socket buffer before calling sbflush_locked(). Update panic strings for new function names. - Break out sbdrop() into sbdrop_locked() that asserts the socket buffer lock. sbdrop() unconditionally locks the socket buffer before calling sbdrop_locked(). - Break out sbdroprecord() into sbdroprecord_locked() that asserts the socket buffer lock. sbdroprecord() unconditionally locks the socket buffer before calling sbdroprecord_locked(). - sofree() now calls socantsendmore_locked() and re-acquires the socket buffer lock on return. It also now calls sbrelease_locked(). - sorflush() now calls socantrcvmore_locked() and re-acquires the socket buffer lock on return. Clean up/mess up other behavior in sorflush() relating to the temporary stack copy of the socket buffer used with dom_dispose by more properly initializing the temporary copy, and selectively bzeroing/copying more carefully to prevent WITNESS from getting confused by improperly initialized mutexes. Annotate why that's necessary, or at least, needed. - soisconnected() now calls sbdrop_locked() before unlocking the socket buffer to avoid locking overhead. Some parts of this change were: Submitted by: sam Sponsored by: FreeBSD Foundation Obtained from: BSD/OS
2004-06-21 00:20:43 +00:00
SOCKBUF_UNLOCK(&so2->so_rcv);
error = ENOBUFS;
}
if (nam != NULL) {
UNP_LINK_WLOCK_ASSERT();
UNP_PCB_LOCK(unp2);
unp_disconnect(unp, unp2);
UNP_PCB_UNLOCK(unp2);
}
UNP_PCB_UNLOCK(unp);
break;
}
1994-05-24 10:09:53 +00:00
case SOCK_SEQPACKET:
case SOCK_STREAM:
if ((so->so_state & SS_ISCONNECTED) == 0) {
if (nam != NULL) {
UNP_LINK_WLOCK_ASSERT();
error = unp_connect(so, nam, td);
if (error)
break; /* XXX */
} else {
error = ENOTCONN;
break;
}
}
1994-05-24 10:09:53 +00:00
/* Lockless read. */
if (so->so_snd.sb_state & SBS_CANTSENDMORE) {
error = EPIPE;
break;
1994-05-24 10:09:53 +00:00
}
/*
* Because connect() and send() are non-atomic in a sendto()
* with a target address, it's possible that the socket will
* have disconnected before the send() can run. In that case
* return the slightly counter-intuitive but otherwise
* correct error that the socket is not connected.
*
* Locking here must be done carefully: the linkage lock
* prevents interconnections between unpcbs from changing, so
* we can traverse from unp to unp2 without acquiring unp's
* lock. Socket buffer locks follow unpcb locks, so we can
* acquire both remote and lock socket buffer locks.
*/
unp2 = unp->unp_conn;
if (unp2 == NULL) {
error = ENOTCONN;
break;
}
so2 = unp2->unp_socket;
UNP_PCB_LOCK(unp2);
Merge next step in socket buffer locking: - sowakeup() now asserts the socket buffer lock on entry. Move the call to KNOTE higher in sowakeup() so that it is made with the socket buffer lock held for consistency with other calls. Release the socket buffer lock prior to calling into pgsigio(), so_upcall(), or aio_swake(). Locking for this event management will need revisiting in the future, but this model avoids lock order reversals when upcalls into other subsystems result in socket/socket buffer operations. Assert that the socket buffer lock is not held at the end of the function. - Wrapper macros for sowakeup(), sorwakeup() and sowwakeup(), now have _locked versions which assert the socket buffer lock on entry. If a wakeup is required by sb_notify(), invoke sowakeup(); otherwise, unconditionally release the socket buffer lock. This results in the socket buffer lock being released whether a wakeup is required or not. - Break out socantsendmore() into socantsendmore_locked() that asserts the socket buffer lock. socantsendmore() unconditionally locks the socket buffer before calling socantsendmore_locked(). Note that both functions return with the socket buffer unlocked as socantsendmore_locked() calls sowwakeup_locked() which has the same properties. Assert that the socket buffer is unlocked on return. - Break out socantrcvmore() into socantrcvmore_locked() that asserts the socket buffer lock. socantrcvmore() unconditionally locks the socket buffer before calling socantrcvmore_locked(). Note that both functions return with the socket buffer unlocked as socantrcvmore_locked() calls sorwakeup_locked() which has similar properties. Assert that the socket buffer is unlocked on return. - Break out sbrelease() into a sbrelease_locked() that asserts the socket buffer lock. sbrelease() unconditionally locks the socket buffer before calling sbrelease_locked(). sbrelease_locked() now invokes sbflush_locked() instead of sbflush(). - Assert the socket buffer lock in socket buffer sanity check functions sblastrecordchk(), sblastmbufchk(). - Assert the socket buffer lock in SBLINKRECORD(). - Break out various sbappend() functions into sbappend_locked() (and variations on that name) that assert the socket buffer lock. The !_locked() variations unconditionally lock the socket buffer before calling their _locked counterparts. Internally, make sure to call _locked() support routines, etc, if already holding the socket buffer lock. - Break out sbinsertoob() into sbinsertoob_locked() that asserts the socket buffer lock. sbinsertoob() unconditionally locks the socket buffer before calling sbinsertoob_locked(). - Break out sbflush() into sbflush_locked() that asserts the socket buffer lock. sbflush() unconditionally locks the socket buffer before calling sbflush_locked(). Update panic strings for new function names. - Break out sbdrop() into sbdrop_locked() that asserts the socket buffer lock. sbdrop() unconditionally locks the socket buffer before calling sbdrop_locked(). - Break out sbdroprecord() into sbdroprecord_locked() that asserts the socket buffer lock. sbdroprecord() unconditionally locks the socket buffer before calling sbdroprecord_locked(). - sofree() now calls socantsendmore_locked() and re-acquires the socket buffer lock on return. It also now calls sbrelease_locked(). - sorflush() now calls socantrcvmore_locked() and re-acquires the socket buffer lock on return. Clean up/mess up other behavior in sorflush() relating to the temporary stack copy of the socket buffer used with dom_dispose by more properly initializing the temporary copy, and selectively bzeroing/copying more carefully to prevent WITNESS from getting confused by improperly initialized mutexes. Annotate why that's necessary, or at least, needed. - soisconnected() now calls sbdrop_locked() before unlocking the socket buffer to avoid locking overhead. Some parts of this change were: Submitted by: sam Sponsored by: FreeBSD Foundation Obtained from: BSD/OS
2004-06-21 00:20:43 +00:00
SOCKBUF_LOCK(&so2->so_rcv);
if (unp2->unp_flags & UNP_WANTCRED) {
/*
2012-11-16 14:00:54 +00:00
* Credentials are passed only once on SOCK_STREAM
* and SOCK_SEQPACKET.
*/
unp2->unp_flags &= ~UNP_WANTCRED;
control = unp_addsockcred(td, control);
}
/*
* Send to paired receive port, and then reduce send buffer
* hiwater marks to maintain backpressure. Wake up readers.
*/
switch (so->so_type) {
case SOCK_STREAM:
if (control != NULL) {
if (sbappendcontrol_locked(&so2->so_rcv, m,
control))
control = NULL;
} else
sbappend_locked(&so2->so_rcv, m, flags);
break;
case SOCK_SEQPACKET: {
const struct sockaddr *from;
from = &sun_noname;
/*
* Don't check for space available in so2->so_rcv.
* Unix domain sockets only check for space in the
* sending sockbuf, and that check is performed one
* level up the stack.
*/
if (sbappendaddr_nospacecheck_locked(&so2->so_rcv,
from, m, control))
control = NULL;
break;
}
}
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically changed the sending sockbuf's high water mark whenever adding or removing data from the receiving sockbuf. It worked for stream sockets, but it never worked for SOCK_SEQPACKET sockets because of their atomic nature. If the sockbuf was partially full, it might return EMSGSIZE instead of blocking. The new solution is based on DragonFlyBSD's fix from commit 3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that sockbuf, causing sosend_generic and friends to block. uipc_rcvd will likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no longer need to call chgsbsize() on every send and receive because they don't change the sockbuf's high water mark. Also, uipc_sense no longer needs to acquire the UIPC linkage lock, because it's simpler to compute the st_blksizes. There is one drawback: since sbspace() will only ever return 0 or the maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum size by at most one packet of size less than the max. I don't think that's a serious problem. In fact, I'm not even positive that FreeBSD guarantees a socket will always stay within its nominal size limit. sys/sys/sockbuf.h Add the SB_STOP flag and adjust sbspace() sys/sys/unpcb.h Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb. sys/kern/uipc_usrreq.c Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP backpressure mechanism. Removing obsolete unpcb fields from db_show_unpcb. tests/sys/kern/unix_seqpacket_test.c Clear expected failures from ATF. Obtained from: DragonFly BSD PR: kern/185812 Reviewed by: silence from freebsd-net@ and rwatson@ MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
2014-03-13 18:42:12 +00:00
mbcnt = so2->so_rcv.sb_mbcnt;
sbcc = sbavail(&so2->so_rcv);
if (sbcc)
sorwakeup_locked(so2);
else
SOCKBUF_UNLOCK(&so2->so_rcv);
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically changed the sending sockbuf's high water mark whenever adding or removing data from the receiving sockbuf. It worked for stream sockets, but it never worked for SOCK_SEQPACKET sockets because of their atomic nature. If the sockbuf was partially full, it might return EMSGSIZE instead of blocking. The new solution is based on DragonFlyBSD's fix from commit 3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that sockbuf, causing sosend_generic and friends to block. uipc_rcvd will likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no longer need to call chgsbsize() on every send and receive because they don't change the sockbuf's high water mark. Also, uipc_sense no longer needs to acquire the UIPC linkage lock, because it's simpler to compute the st_blksizes. There is one drawback: since sbspace() will only ever return 0 or the maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum size by at most one packet of size less than the max. I don't think that's a serious problem. In fact, I'm not even positive that FreeBSD guarantees a socket will always stay within its nominal size limit. sys/sys/sockbuf.h Add the SB_STOP flag and adjust sbspace() sys/sys/unpcb.h Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb. sys/kern/uipc_usrreq.c Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP backpressure mechanism. Removing obsolete unpcb fields from db_show_unpcb. tests/sys/kern/unix_seqpacket_test.c Clear expected failures from ATF. Obtained from: DragonFly BSD PR: kern/185812 Reviewed by: silence from freebsd-net@ and rwatson@ MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
2014-03-13 18:42:12 +00:00
/*
* The PCB lock on unp2 protects the SB_STOP flag. Without it,
* it would be possible for uipc_rcvd to be called at this
* point, drain the receiving sockbuf, clear SB_STOP, and then
* we would set SB_STOP below. That could lead to an empty
* sockbuf having SB_STOP set
*/
SOCKBUF_LOCK(&so->so_snd);
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically changed the sending sockbuf's high water mark whenever adding or removing data from the receiving sockbuf. It worked for stream sockets, but it never worked for SOCK_SEQPACKET sockets because of their atomic nature. If the sockbuf was partially full, it might return EMSGSIZE instead of blocking. The new solution is based on DragonFlyBSD's fix from commit 3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that sockbuf, causing sosend_generic and friends to block. uipc_rcvd will likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no longer need to call chgsbsize() on every send and receive because they don't change the sockbuf's high water mark. Also, uipc_sense no longer needs to acquire the UIPC linkage lock, because it's simpler to compute the st_blksizes. There is one drawback: since sbspace() will only ever return 0 or the maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum size by at most one packet of size less than the max. I don't think that's a serious problem. In fact, I'm not even positive that FreeBSD guarantees a socket will always stay within its nominal size limit. sys/sys/sockbuf.h Add the SB_STOP flag and adjust sbspace() sys/sys/unpcb.h Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb. sys/kern/uipc_usrreq.c Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP backpressure mechanism. Removing obsolete unpcb fields from db_show_unpcb. tests/sys/kern/unix_seqpacket_test.c Clear expected failures from ATF. Obtained from: DragonFly BSD PR: kern/185812 Reviewed by: silence from freebsd-net@ and rwatson@ MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
2014-03-13 18:42:12 +00:00
if (sbcc >= so->so_snd.sb_hiwat || mbcnt >= so->so_snd.sb_mbmax)
so->so_snd.sb_flags |= SB_STOP;
SOCKBUF_UNLOCK(&so->so_snd);
UNP_PCB_UNLOCK(unp2);
m = NULL;
1994-05-24 10:09:53 +00:00
break;
}
/*
* PRUS_EOF is equivalent to pru_send followed by pru_shutdown.
*/
if (flags & PRUS_EOF) {
UNP_PCB_LOCK(unp);
socantsendmore(so);
unp_shutdown(unp);
UNP_PCB_UNLOCK(unp);
}
if ((nam != NULL) || (flags & PRUS_EOF))
UNP_LINK_WUNLOCK();
else
UNP_LINK_RUNLOCK();
if (control != NULL && error != 0)
unp_dispose_mbuf(control);
1994-05-24 10:09:53 +00:00
release:
if (control != NULL)
1994-05-24 10:09:53 +00:00
m_freem(control);
if (m != NULL)
1994-05-24 10:09:53 +00:00
m_freem(m);
return (error);
}
static int
uipc_ready(struct socket *so, struct mbuf *m, int count)
{
struct unpcb *unp, *unp2;
struct socket *so2;
int error;
unp = sotounpcb(so);
UNP_LINK_RLOCK();
unp2 = unp->unp_conn;
UNP_PCB_LOCK(unp2);
so2 = unp2->unp_socket;
SOCKBUF_LOCK(&so2->so_rcv);
if ((error = sbready(&so2->so_rcv, m, count)) == 0)
sorwakeup_locked(so2);
else
SOCKBUF_UNLOCK(&so2->so_rcv);
UNP_PCB_UNLOCK(unp2);
UNP_LINK_RUNLOCK();
return (error);
}
static int
uipc_sense(struct socket *so, struct stat *sb)
{
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically changed the sending sockbuf's high water mark whenever adding or removing data from the receiving sockbuf. It worked for stream sockets, but it never worked for SOCK_SEQPACKET sockets because of their atomic nature. If the sockbuf was partially full, it might return EMSGSIZE instead of blocking. The new solution is based on DragonFlyBSD's fix from commit 3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that sockbuf, causing sosend_generic and friends to block. uipc_rcvd will likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no longer need to call chgsbsize() on every send and receive because they don't change the sockbuf's high water mark. Also, uipc_sense no longer needs to acquire the UIPC linkage lock, because it's simpler to compute the st_blksizes. There is one drawback: since sbspace() will only ever return 0 or the maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum size by at most one packet of size less than the max. I don't think that's a serious problem. In fact, I'm not even positive that FreeBSD guarantees a socket will always stay within its nominal size limit. sys/sys/sockbuf.h Add the SB_STOP flag and adjust sbspace() sys/sys/unpcb.h Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb. sys/kern/uipc_usrreq.c Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP backpressure mechanism. Removing obsolete unpcb fields from db_show_unpcb. tests/sys/kern/unix_seqpacket_test.c Clear expected failures from ATF. Obtained from: DragonFly BSD PR: kern/185812 Reviewed by: silence from freebsd-net@ and rwatson@ MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
2014-03-13 18:42:12 +00:00
struct unpcb *unp;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_sense: unp == NULL"));
sb->st_blksize = so->so_snd.sb_hiwat;
UNP_PCB_LOCK(unp);
sb->st_dev = NODEV;
if (unp->unp_ino == 0)
unp->unp_ino = (++unp_ino == 0) ? ++unp_ino : unp_ino;
sb->st_ino = unp->unp_ino;
UNP_PCB_UNLOCK(unp);
return (0);
}
static int
uipc_shutdown(struct socket *so)
{
struct unpcb *unp;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_shutdown: unp == NULL"));
UNP_LINK_WLOCK();
UNP_PCB_LOCK(unp);
socantsendmore(so);
unp_shutdown(unp);
UNP_PCB_UNLOCK(unp);
UNP_LINK_WUNLOCK();
return (0);
}
static int
uipc_sockaddr(struct socket *so, struct sockaddr **nam)
{
struct unpcb *unp;
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
const struct sockaddr *sa;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_sockaddr: unp == NULL"));
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
*nam = malloc(sizeof(struct sockaddr_un), M_SONAME, M_WAITOK);
UNP_PCB_LOCK(unp);
if (unp->unp_addr != NULL)
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
sa = (struct sockaddr *) unp->unp_addr;
else
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
sa = &sun_noname;
bcopy(sa, *nam, sa->sa_len);
UNP_PCB_UNLOCK(unp);
return (0);
1994-05-24 10:09:53 +00:00
}
static struct pr_usrreqs uipc_usrreqs_dgram = {
.pru_abort = uipc_abort,
.pru_accept = uipc_accept,
.pru_attach = uipc_attach,
.pru_bind = uipc_bind,
.pru_bindat = uipc_bindat,
.pru_connect = uipc_connect,
.pru_connectat = uipc_connectat,
.pru_connect2 = uipc_connect2,
.pru_detach = uipc_detach,
.pru_disconnect = uipc_disconnect,
.pru_listen = uipc_listen,
.pru_peeraddr = uipc_peeraddr,
.pru_rcvd = uipc_rcvd,
.pru_send = uipc_send,
.pru_sense = uipc_sense,
.pru_shutdown = uipc_shutdown,
.pru_sockaddr = uipc_sockaddr,
.pru_soreceive = soreceive_dgram,
.pru_close = uipc_close,
};
static struct pr_usrreqs uipc_usrreqs_seqpacket = {
.pru_abort = uipc_abort,
.pru_accept = uipc_accept,
.pru_attach = uipc_attach,
.pru_bind = uipc_bind,
.pru_bindat = uipc_bindat,
.pru_connect = uipc_connect,
.pru_connectat = uipc_connectat,
.pru_connect2 = uipc_connect2,
.pru_detach = uipc_detach,
.pru_disconnect = uipc_disconnect,
.pru_listen = uipc_listen,
.pru_peeraddr = uipc_peeraddr,
.pru_rcvd = uipc_rcvd,
.pru_send = uipc_send,
.pru_sense = uipc_sense,
.pru_shutdown = uipc_shutdown,
.pru_sockaddr = uipc_sockaddr,
.pru_soreceive = soreceive_generic, /* XXX: or...? */
.pru_close = uipc_close,
};
static struct pr_usrreqs uipc_usrreqs_stream = {
.pru_abort = uipc_abort,
.pru_accept = uipc_accept,
.pru_attach = uipc_attach,
.pru_bind = uipc_bind,
.pru_bindat = uipc_bindat,
.pru_connect = uipc_connect,
.pru_connectat = uipc_connectat,
.pru_connect2 = uipc_connect2,
.pru_detach = uipc_detach,
.pru_disconnect = uipc_disconnect,
.pru_listen = uipc_listen,
.pru_peeraddr = uipc_peeraddr,
.pru_rcvd = uipc_rcvd,
.pru_send = uipc_send,
.pru_ready = uipc_ready,
.pru_sense = uipc_sense,
.pru_shutdown = uipc_shutdown,
.pru_sockaddr = uipc_sockaddr,
.pru_soreceive = soreceive_generic,
.pru_close = uipc_close,
};
static int
uipc_ctloutput(struct socket *so, struct sockopt *sopt)
{
struct unpcb *unp;
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
struct xucred xu;
int error, optval;
if (sopt->sopt_level != 0)
return (EINVAL);
unp = sotounpcb(so);
KASSERT(unp != NULL, ("uipc_ctloutput: unp == NULL"));
error = 0;
switch (sopt->sopt_dir) {
case SOPT_GET:
switch (sopt->sopt_name) {
case LOCAL_PEERCRED:
UNP_PCB_LOCK(unp);
if (unp->unp_flags & UNP_HAVEPC)
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
xu = unp->unp_peercred;
else {
if (so->so_type == SOCK_STREAM)
error = ENOTCONN;
else
error = EINVAL;
}
UNP_PCB_UNLOCK(unp);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
if (error == 0)
error = sooptcopyout(sopt, &xu, sizeof(xu));
break;
case LOCAL_CREDS:
/* Unlocked read. */
optval = unp->unp_flags & UNP_WANTCRED ? 1 : 0;
error = sooptcopyout(sopt, &optval, sizeof(optval));
break;
case LOCAL_CONNWAIT:
/* Unlocked read. */
optval = unp->unp_flags & UNP_CONNWAIT ? 1 : 0;
error = sooptcopyout(sopt, &optval, sizeof(optval));
break;
default:
error = EOPNOTSUPP;
break;
}
break;
case SOPT_SET:
switch (sopt->sopt_name) {
case LOCAL_CREDS:
case LOCAL_CONNWAIT:
error = sooptcopyin(sopt, &optval, sizeof(optval),
sizeof(optval));
if (error)
break;
#define OPTSET(bit) do { \
UNP_PCB_LOCK(unp); \
if (optval) \
unp->unp_flags |= bit; \
else \
unp->unp_flags &= ~bit; \
UNP_PCB_UNLOCK(unp); \
} while (0)
switch (sopt->sopt_name) {
case LOCAL_CREDS:
OPTSET(UNP_WANTCRED);
break;
case LOCAL_CONNWAIT:
OPTSET(UNP_CONNWAIT);
break;
default:
break;
}
break;
#undef OPTSET
default:
error = ENOPROTOOPT;
break;
}
2005-04-25 00:48:04 +00:00
break;
default:
error = EOPNOTSUPP;
break;
}
return (error);
}
static int
unp_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
{
return (unp_connectat(AT_FDCWD, so, nam, td));
}
static int
unp_connectat(int fd, struct socket *so, struct sockaddr *nam,
struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct sockaddr_un *soun = (struct sockaddr_un *)nam;
struct vnode *vp;
struct socket *so2, *so3;
struct unpcb *unp, *unp2, *unp3;
1994-05-24 10:09:53 +00:00
struct nameidata nd;
char buf[SOCK_MAXADDRLEN];
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
struct sockaddr *sa;
Change the cap_rights_t type from uint64_t to a structure that we can extend in the future in a backward compatible (API and ABI) way. The cap_rights_t represents capability rights. We used to use one bit to represent one right, but we are running out of spare bits. Currently the new structure provides place for 114 rights (so 50 more than the previous cap_rights_t), but it is possible to grow the structure to hold at least 285 rights, although we can make it even larger if 285 rights won't be enough. The structure definition looks like this: struct cap_rights { uint64_t cr_rights[CAP_RIGHTS_VERSION + 2]; }; The initial CAP_RIGHTS_VERSION is 0. The top two bits in the first element of the cr_rights[] array contain total number of elements in the array - 2. This means if those two bits are equal to 0, we have 2 array elements. The top two bits in all remaining array elements should be 0. The next five bits in all array elements contain array index. Only one bit is used and bit position in this five-bits range defines array index. This means there can be at most five array elements in the future. To define new right the CAPRIGHT() macro must be used. The macro takes two arguments - an array index and a bit to set, eg. #define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL) We still support aliases that combine few rights, but the rights have to belong to the same array element, eg: #define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL) #define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL) #define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP) There is new API to manage the new cap_rights_t structure: cap_rights_t *cap_rights_init(cap_rights_t *rights, ...); void cap_rights_set(cap_rights_t *rights, ...); void cap_rights_clear(cap_rights_t *rights, ...); bool cap_rights_is_set(const cap_rights_t *rights, ...); bool cap_rights_is_valid(const cap_rights_t *rights); void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src); void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src); bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little); Capability rights to the cap_rights_init(), cap_rights_set(), cap_rights_clear() and cap_rights_is_set() functions are provided by separating them with commas, eg: cap_rights_t rights; cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT); There is no need to terminate the list of rights, as those functions are actually macros that take care of the termination, eg: #define cap_rights_set(rights, ...) \ __cap_rights_set((rights), __VA_ARGS__, 0ULL) void __cap_rights_set(cap_rights_t *rights, ...); Thanks to using one bit as an array index we can assert in those functions that there are no two rights belonging to different array elements provided together. For example this is illegal and will be detected, because CAP_LOOKUP belongs to element 0 and CAP_PDKILL to element 1: cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL); Providing several rights that belongs to the same array's element this way is correct, but is not advised. It should only be used for aliases definition. This commit also breaks compatibility with some existing Capsicum system calls, but I see no other way to do that. This should be fine as Capsicum is still experimental and this change is not going to 9.x. Sponsored by: The FreeBSD Foundation
2013-09-05 00:09:56 +00:00
cap_rights_t rights;
int error, len;
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
if (nam->sa_family != AF_UNIX)
return (EAFNOSUPPORT);
UNP_LINK_WLOCK_ASSERT();
1994-05-24 10:09:53 +00:00
unp = sotounpcb(so);
KASSERT(unp != NULL, ("unp_connect: unp == NULL"));
if (nam->sa_len > sizeof(struct sockaddr_un))
return (EINVAL);
len = nam->sa_len - offsetof(struct sockaddr_un, sun_path);
if (len <= 0)
return (EINVAL);
bcopy(soun->sun_path, buf, len);
buf[len] = 0;
UNP_PCB_LOCK(unp);
if (unp->unp_flags & UNP_CONNECTING) {
UNP_PCB_UNLOCK(unp);
return (EALREADY);
}
UNP_LINK_WUNLOCK();
unp->unp_flags |= UNP_CONNECTING;
UNP_PCB_UNLOCK(unp);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
sa = malloc(sizeof(struct sockaddr_un), M_SONAME, M_WAITOK);
NDINIT_ATRIGHTS(&nd, LOOKUP, FOLLOW | LOCKSHARED | LOCKLEAF,
Change the cap_rights_t type from uint64_t to a structure that we can extend in the future in a backward compatible (API and ABI) way. The cap_rights_t represents capability rights. We used to use one bit to represent one right, but we are running out of spare bits. Currently the new structure provides place for 114 rights (so 50 more than the previous cap_rights_t), but it is possible to grow the structure to hold at least 285 rights, although we can make it even larger if 285 rights won't be enough. The structure definition looks like this: struct cap_rights { uint64_t cr_rights[CAP_RIGHTS_VERSION + 2]; }; The initial CAP_RIGHTS_VERSION is 0. The top two bits in the first element of the cr_rights[] array contain total number of elements in the array - 2. This means if those two bits are equal to 0, we have 2 array elements. The top two bits in all remaining array elements should be 0. The next five bits in all array elements contain array index. Only one bit is used and bit position in this five-bits range defines array index. This means there can be at most five array elements in the future. To define new right the CAPRIGHT() macro must be used. The macro takes two arguments - an array index and a bit to set, eg. #define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL) We still support aliases that combine few rights, but the rights have to belong to the same array element, eg: #define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL) #define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL) #define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP) There is new API to manage the new cap_rights_t structure: cap_rights_t *cap_rights_init(cap_rights_t *rights, ...); void cap_rights_set(cap_rights_t *rights, ...); void cap_rights_clear(cap_rights_t *rights, ...); bool cap_rights_is_set(const cap_rights_t *rights, ...); bool cap_rights_is_valid(const cap_rights_t *rights); void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src); void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src); bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little); Capability rights to the cap_rights_init(), cap_rights_set(), cap_rights_clear() and cap_rights_is_set() functions are provided by separating them with commas, eg: cap_rights_t rights; cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT); There is no need to terminate the list of rights, as those functions are actually macros that take care of the termination, eg: #define cap_rights_set(rights, ...) \ __cap_rights_set((rights), __VA_ARGS__, 0ULL) void __cap_rights_set(cap_rights_t *rights, ...); Thanks to using one bit as an array index we can assert in those functions that there are no two rights belonging to different array elements provided together. For example this is illegal and will be detected, because CAP_LOOKUP belongs to element 0 and CAP_PDKILL to element 1: cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL); Providing several rights that belongs to the same array's element this way is correct, but is not advised. It should only be used for aliases definition. This commit also breaks compatibility with some existing Capsicum system calls, but I see no other way to do that. This should be fine as Capsicum is still experimental and this change is not going to 9.x. Sponsored by: The FreeBSD Foundation
2013-09-05 00:09:56 +00:00
UIO_SYSSPACE, buf, fd, cap_rights_init(&rights, CAP_CONNECTAT), td);
error = namei(&nd);
if (error)
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
vp = NULL;
else
vp = nd.ni_vp;
ASSERT_VOP_LOCKED(vp, "unp_connect");
NDFREE(&nd, NDF_ONLY_PNBUF);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
if (error)
goto bad;
1994-05-24 10:09:53 +00:00
if (vp->v_type != VSOCK) {
error = ENOTSOCK;
goto bad;
}
#ifdef MAC
error = mac_vnode_check_open(td->td_ucred, vp, VWRITE | VREAD);
if (error)
goto bad;
#endif
error = VOP_ACCESS(vp, VWRITE, td->td_ucred, td);
if (error)
1994-05-24 10:09:53 +00:00
goto bad;
unp = sotounpcb(so);
KASSERT(unp != NULL, ("unp_connect: unp == NULL"));
/*
* Lock linkage lock for two reasons: make sure v_socket is stable,
* and to protect simultaneous locking of multiple pcbs.
*/
UNP_LINK_WLOCK();
VOP_UNP_CONNECT(vp, &so2);
if (so2 == NULL) {
1994-05-24 10:09:53 +00:00
error = ECONNREFUSED;
goto bad2;
1994-05-24 10:09:53 +00:00
}
if (so->so_type != so2->so_type) {
error = EPROTOTYPE;
goto bad2;
1994-05-24 10:09:53 +00:00
}
if (so->so_proto->pr_flags & PR_CONNREQUIRED) {
if (so2->so_options & SO_ACCEPTCONN) {
CURVNET_SET(so2->so_vnet);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
so3 = sonewconn(so2, 0);
CURVNET_RESTORE();
} else
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
so3 = NULL;
if (so3 == NULL) {
1994-05-24 10:09:53 +00:00
error = ECONNREFUSED;
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
goto bad2;
1994-05-24 10:09:53 +00:00
}
unp = sotounpcb(so);
1994-05-24 10:09:53 +00:00
unp2 = sotounpcb(so2);
unp3 = sotounpcb(so3);
UNP_PCB_LOCK(unp);
UNP_PCB_LOCK(unp2);
UNP_PCB_LOCK(unp3);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
if (unp2->unp_addr != NULL) {
bcopy(unp2->unp_addr, sa, unp2->unp_addr->sun_len);
unp3->unp_addr = (struct sockaddr_un *) sa;
sa = NULL;
}
/*
* The connector's (client's) credentials are copied from its
* process structure at the time of connect() (which is now).
*/
cru2x(td->td_ucred, &unp3->unp_peercred);
unp3->unp_flags |= UNP_HAVEPC;
/*
* The receiver's (server's) credentials are copied from the
* unp_peercred member of socket on which the former called
* listen(); uipc_listen() cached that process's credentials
* at that time so we can use them now.
*/
KASSERT(unp2->unp_flags & UNP_HAVEPCCACHED,
("unp_connect: listener without cached peercred"));
memcpy(&unp->unp_peercred, &unp2->unp_peercred,
sizeof(unp->unp_peercred));
unp->unp_flags |= UNP_HAVEPC;
if (unp2->unp_flags & UNP_WANTCRED)
unp3->unp_flags |= UNP_WANTCRED;
UNP_PCB_UNLOCK(unp3);
UNP_PCB_UNLOCK(unp2);
UNP_PCB_UNLOCK(unp);
#ifdef MAC
mac_socketpeer_set_from_socket(so, so3);
mac_socketpeer_set_from_socket(so3, so);
#endif
1994-05-24 10:09:53 +00:00
so2 = so3;
}
unp = sotounpcb(so);
KASSERT(unp != NULL, ("unp_connect: unp == NULL"));
unp2 = sotounpcb(so2);
KASSERT(unp2 != NULL, ("unp_connect: unp2 == NULL"));
UNP_PCB_LOCK(unp);
UNP_PCB_LOCK(unp2);
error = unp_connect2(so, so2, PRU_CONNECT);
UNP_PCB_UNLOCK(unp2);
UNP_PCB_UNLOCK(unp);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
bad2:
UNP_LINK_WUNLOCK();
1994-05-24 10:09:53 +00:00
bad:
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
if (vp != NULL)
vput(vp);
free(sa, M_SONAME);
UNP_LINK_WLOCK();
UNP_PCB_LOCK(unp);
unp->unp_flags &= ~UNP_CONNECTING;
UNP_PCB_UNLOCK(unp);
1994-05-24 10:09:53 +00:00
return (error);
}
static int
unp_connect2(struct socket *so, struct socket *so2, int req)
1994-05-24 10:09:53 +00:00
{
struct unpcb *unp;
struct unpcb *unp2;
1994-05-24 10:09:53 +00:00
unp = sotounpcb(so);
KASSERT(unp != NULL, ("unp_connect2: unp == NULL"));
unp2 = sotounpcb(so2);
KASSERT(unp2 != NULL, ("unp_connect2: unp2 == NULL"));
UNP_LINK_WLOCK_ASSERT();
UNP_PCB_LOCK_ASSERT(unp);
UNP_PCB_LOCK_ASSERT(unp2);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
1994-05-24 10:09:53 +00:00
if (so2->so_type != so->so_type)
return (EPROTOTYPE);
unp2->unp_flags &= ~UNP_NASCENT;
1994-05-24 10:09:53 +00:00
unp->unp_conn = unp2;
1994-05-24 10:09:53 +00:00
switch (so->so_type) {
case SOCK_DGRAM:
LIST_INSERT_HEAD(&unp2->unp_refs, unp, unp_reflink);
1994-05-24 10:09:53 +00:00
soisconnected(so);
break;
case SOCK_STREAM:
case SOCK_SEQPACKET:
1994-05-24 10:09:53 +00:00
unp2->unp_conn = unp;
if (req == PRU_CONNECT &&
((unp->unp_flags | unp2->unp_flags) & UNP_CONNWAIT))
soisconnecting(so);
else
soisconnected(so);
1994-05-24 10:09:53 +00:00
soisconnected(so2);
break;
default:
panic("unp_connect2");
}
return (0);
}
static void
unp_disconnect(struct unpcb *unp, struct unpcb *unp2)
1994-05-24 10:09:53 +00:00
{
struct socket *so;
1994-05-24 10:09:53 +00:00
KASSERT(unp2 != NULL, ("unp_disconnect: unp2 == NULL"));
UNP_LINK_WLOCK_ASSERT();
UNP_PCB_LOCK_ASSERT(unp);
UNP_PCB_LOCK_ASSERT(unp2);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
unp->unp_conn = NULL;
1994-05-24 10:09:53 +00:00
switch (unp->unp_socket->so_type) {
case SOCK_DGRAM:
LIST_REMOVE(unp, unp_reflink);
so = unp->unp_socket;
SOCK_LOCK(so);
so->so_state &= ~SS_ISCONNECTED;
SOCK_UNLOCK(so);
1994-05-24 10:09:53 +00:00
break;
case SOCK_STREAM:
case SOCK_SEQPACKET:
1994-05-24 10:09:53 +00:00
soisdisconnected(unp->unp_socket);
unp2->unp_conn = NULL;
1994-05-24 10:09:53 +00:00
soisdisconnected(unp2->unp_socket);
break;
}
}
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
/*
* unp_pcblist() walks the global list of struct unpcb's to generate a
* pointer list, bumping the refcount on each unpcb. It then copies them out
* sequentially, validating the generation number on each to see if it has
* been detached. All of this is necessary because copyout() may sleep on
* disk I/O.
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
*/
static int
unp_pcblist(SYSCTL_HANDLER_ARGS)
{
int error, i, n;
int freeunp;
struct unpcb *unp, **unp_list;
unp_gen_t gencnt;
struct xunpgen *xug;
struct unp_head *head;
struct xunpcb *xu;
switch ((intptr_t)arg1) {
case SOCK_STREAM:
head = &unp_shead;
break;
case SOCK_DGRAM:
head = &unp_dhead;
break;
case SOCK_SEQPACKET:
head = &unp_sphead;
break;
default:
panic("unp_pcblist: arg1 %d", (int)(intptr_t)arg1);
}
/*
* The process of preparing the PCB list is too time-consuming and
* resource-intensive to repeat twice on every request.
*/
if (req->oldptr == NULL) {
n = unp_count;
req->oldidx = 2 * (sizeof *xug)
+ (n + n/8) * sizeof(struct xunpcb);
return (0);
}
if (req->newptr != NULL)
return (EPERM);
/*
* OK, now we're committed to doing something.
*/
xug = malloc(sizeof(*xug), M_TEMP, M_WAITOK);
UNP_LIST_LOCK();
gencnt = unp_gencnt;
n = unp_count;
UNP_LIST_UNLOCK();
xug->xug_len = sizeof *xug;
xug->xug_count = n;
xug->xug_gen = gencnt;
xug->xug_sogen = so_gencnt;
error = SYSCTL_OUT(req, xug, sizeof *xug);
if (error) {
free(xug, M_TEMP);
return (error);
}
unp_list = malloc(n * sizeof *unp_list, M_TEMP, M_WAITOK);
UNP_LIST_LOCK();
for (unp = LIST_FIRST(head), i = 0; unp && i < n;
unp = LIST_NEXT(unp, unp_link)) {
UNP_PCB_LOCK(unp);
if (unp->unp_gencnt <= gencnt) {
if (cr_cansee(req->td->td_ucred,
unp->unp_socket->so_cred)) {
UNP_PCB_UNLOCK(unp);
continue;
}
unp_list[i++] = unp;
unp->unp_refcount++;
}
UNP_PCB_UNLOCK(unp);
}
UNP_LIST_UNLOCK();
n = i; /* In case we lost some during malloc. */
error = 0;
xu = malloc(sizeof(*xu), M_TEMP, M_WAITOK | M_ZERO);
for (i = 0; i < n; i++) {
unp = unp_list[i];
UNP_PCB_LOCK(unp);
unp->unp_refcount--;
if (unp->unp_refcount != 0 && unp->unp_gencnt <= gencnt) {
xu->xu_len = sizeof *xu;
xu->xu_unpp = unp;
/*
* XXX - need more locking here to protect against
* connect/disconnect races for SMP.
*/
if (unp->unp_addr != NULL)
bcopy(unp->unp_addr, &xu->xu_addr,
unp->unp_addr->sun_len);
if (unp->unp_conn != NULL &&
unp->unp_conn->unp_addr != NULL)
bcopy(unp->unp_conn->unp_addr,
&xu->xu_caddr,
unp->unp_conn->unp_addr->sun_len);
bcopy(unp, &xu->xu_unp, sizeof *unp);
sotoxsocket(unp->unp_socket, &xu->xu_socket);
UNP_PCB_UNLOCK(unp);
error = SYSCTL_OUT(req, xu, sizeof *xu);
} else {
freeunp = (unp->unp_refcount == 0);
UNP_PCB_UNLOCK(unp);
if (freeunp) {
UNP_PCB_LOCK_DESTROY(unp);
uma_zfree(unp_zone, unp);
}
}
}
free(xu, M_TEMP);
if (!error) {
/*
* Give the user an updated idea of our state. If the
* generation differs from what we told her before, she knows
* that something happened while we were processing this
* request, and it might be necessary to retry.
*/
xug->xug_gen = unp_gencnt;
xug->xug_sogen = so_gencnt;
xug->xug_count = unp_count;
error = SYSCTL_OUT(req, xug, sizeof *xug);
}
free(unp_list, M_TEMP);
free(xug, M_TEMP);
return (error);
}
SYSCTL_PROC(_net_local_dgram, OID_AUTO, pcblist, CTLTYPE_OPAQUE | CTLFLAG_RD,
(void *)(intptr_t)SOCK_DGRAM, 0, unp_pcblist, "S,xunpcb",
"List of active local datagram sockets");
SYSCTL_PROC(_net_local_stream, OID_AUTO, pcblist, CTLTYPE_OPAQUE | CTLFLAG_RD,
(void *)(intptr_t)SOCK_STREAM, 0, unp_pcblist, "S,xunpcb",
"List of active local stream sockets");
SYSCTL_PROC(_net_local_seqpacket, OID_AUTO, pcblist,
CTLTYPE_OPAQUE | CTLFLAG_RD,
(void *)(intptr_t)SOCK_SEQPACKET, 0, unp_pcblist, "S,xunpcb",
"List of active local seqpacket sockets");
static void
unp_shutdown(struct unpcb *unp)
1994-05-24 10:09:53 +00:00
{
struct unpcb *unp2;
1994-05-24 10:09:53 +00:00
struct socket *so;
UNP_LINK_WLOCK_ASSERT();
UNP_PCB_LOCK_ASSERT(unp);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
unp2 = unp->unp_conn;
if ((unp->unp_socket->so_type == SOCK_STREAM ||
(unp->unp_socket->so_type == SOCK_SEQPACKET)) && unp2 != NULL) {
so = unp2->unp_socket;
if (so != NULL)
socantrcvmore(so);
}
1994-05-24 10:09:53 +00:00
}
static void
unp_drop(struct unpcb *unp)
1994-05-24 10:09:53 +00:00
{
struct socket *so = unp->unp_socket;
struct unpcb *unp2;
1994-05-24 10:09:53 +00:00
UNP_LINK_WLOCK_ASSERT();
UNP_PCB_LOCK_ASSERT(unp);
Introduce a subsystem lock around UNIX domain sockets in order to protect global and allocated variables. This strategy is derived from work originally developed by BSDi for BSD/OS, and applied to FreeBSD by Sam Leffler: - Add unp_mtx, a global mutex which will protect all UNIX domain socket related variables, structures, etc. - Add UNP_LOCK(), UNP_UNLOCK(), UNP_LOCK_ASSERT() macros. - Acquire unp_mtx on entering most UNIX domain socket code, drop/re-acquire around calls into VFS, and release it on return. - Avoid performing sodupsockaddr() while holding the mutex, so in general move to allocating storage before acquiring the mutex to copy the data. - Make a stack copy of the xucred rather than copying out while holding unp_mtx. Copy the peer credential out after releasing the mutex. - Add additional assertions of vnode locks following VOP_CREATE(). A few notes: - Use of an sx lock for the file list mutex may cause problems with regard to unp_mtx when garbage collection passed file descriptors. - The locking in unp_pcblist() for sysctl monitoring is correct subject to the unpcb zone not returning memory for reuse by other subsystems (consistent with similar existing concerns). - Sam's version of this change, as with the BSD/OS version, made use of both a global lock and per-unpcb locks. However, in practice, the global lock covered all accesses, so I have simplified out the unpcb locks in the interest of getting this merged faster (reducing the overhead but not sacrificing granularity in most cases). We will want to explore possibilities for improving lock granularity in this code in the future. Submitted by: sam Sponsored by: FreeBSD Foundatiuon Obtained from: BSD/OS 5 snapshot provided by BSDi
2004-06-10 21:34:38 +00:00
/*
* Regardless of whether the socket's peer dropped the connection
* with this socket by aborting or disconnecting, POSIX requires
* that ECONNRESET is returned.
*/
so->so_error = ECONNRESET;
unp2 = unp->unp_conn;
if (unp2 == NULL)
return;
UNP_PCB_LOCK(unp2);
unp_disconnect(unp, unp2);
UNP_PCB_UNLOCK(unp2);
1994-05-24 10:09:53 +00:00
}
static void
unp_freerights(struct filedescent **fdep, int fdcount)
{
struct file *fp;
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
int i;
KASSERT(fdcount > 0, ("%s: fdcount %d", __func__, fdcount));
for (i = 0; i < fdcount; i++) {
fp = fdep[i]->fde_file;
filecaps_free(&fdep[i]->fde_caps);
unp_discard(fp);
}
free(fdep[0], M_FILECAPS);
}
static int
unp_externalize(struct mbuf *control, struct mbuf **controlp, int flags)
1994-05-24 10:09:53 +00:00
{
struct thread *td = curthread; /* XXX */
struct cmsghdr *cm = mtod(control, struct cmsghdr *);
int i;
int *fdp;
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
struct filedesc *fdesc = td->td_proc->p_fd;
struct filedescent **fdep;
void *data;
socklen_t clen = control->m_len, datalen;
int error, newfds;
u_int newlen;
1994-05-24 10:09:53 +00:00
UNP_LINK_UNLOCK_ASSERT();
error = 0;
if (controlp != NULL) /* controlp == NULL => free control messages */
*controlp = NULL;
while (cm != NULL) {
if (sizeof(*cm) > clen || cm->cmsg_len > clen) {
error = EINVAL;
break;
}
data = CMSG_DATA(cm);
datalen = (caddr_t)cm + cm->cmsg_len - (caddr_t)data;
if (cm->cmsg_level == SOL_SOCKET
&& cm->cmsg_type == SCM_RIGHTS) {
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
newfds = datalen / sizeof(*fdep);
if (newfds == 0)
goto next;
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
fdep = data;
2003-03-23 19:41:34 +00:00
/* If we're not outputting the descriptors free them. */
if (error || controlp == NULL) {
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
unp_freerights(fdep, newfds);
goto next;
}
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
FILEDESC_XLOCK(fdesc);
/*
* Now change each pointer to an fd in the global
* table to an integer that is the index to the local
* fd table entry that we set up to point to the
* global one we are transferring.
*/
newlen = newfds * sizeof(int);
*controlp = sbcreatecontrol(NULL, newlen,
SCM_RIGHTS, SOL_SOCKET);
if (*controlp == NULL) {
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
FILEDESC_XUNLOCK(fdesc);
error = E2BIG;
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
unp_freerights(fdep, newfds);
goto next;
}
fdp = (int *)
CMSG_DATA(mtod(*controlp, struct cmsghdr *));
if (fdallocn(td, 0, fdp, newfds) != 0) {
FILEDESC_XUNLOCK(fdesc);
error = EMSGSIZE;
unp_freerights(fdep, newfds);
m_freem(*controlp);
*controlp = NULL;
goto next;
}
for (i = 0; i < newfds; i++, fdp++) {
_finstall(fdesc, fdep[i]->fde_file, *fdp,
(flags & MSG_CMSG_CLOEXEC) != 0 ? UF_EXCLOSE : 0,
&fdep[i]->fde_caps);
unp_externalize_fp(fdep[i]->fde_file);
}
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
FILEDESC_XUNLOCK(fdesc);
free(fdep[0], M_FILECAPS);
} else {
/* We can just copy anything else across. */
if (error || controlp == NULL)
goto next;
*controlp = sbcreatecontrol(NULL, datalen,
cm->cmsg_type, cm->cmsg_level);
if (*controlp == NULL) {
error = ENOBUFS;
goto next;
}
bcopy(data,
CMSG_DATA(mtod(*controlp, struct cmsghdr *)),
datalen);
}
controlp = &(*controlp)->m_next;
next:
if (CMSG_SPACE(datalen) < clen) {
clen -= CMSG_SPACE(datalen);
cm = (struct cmsghdr *)
((caddr_t)cm + CMSG_SPACE(datalen));
} else {
clen = 0;
cm = NULL;
}
1994-05-24 10:09:53 +00:00
}
m_freem(control);
return (error);
1994-05-24 10:09:53 +00:00
}
static void
unp_zone_change(void *tag)
{
uma_zone_set_max(unp_zone, maxsockets);
}
static void
unp_init(void)
{
Change the curvnet variable from a global const struct vnet *, previously always pointing to the default vnet context, to a dynamically changing thread-local one. The currvnet context should be set on entry to networking code via CURVNET_SET() macros, and reverted to previous state via CURVNET_RESTORE(). Recursions on curvnet are permitted, though strongly discuouraged. This change should have no functional impact on nooptions VIMAGE kernel builds, where CURVNET_* macros expand to whitespace. The curthread->td_vnet (aka curvnet) variable's purpose is to be an indicator of the vnet context in which the current network-related operation takes place, in case we cannot deduce the current vnet context from any other source, such as by looking at mbuf's m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so far curvnet has turned out to be an invaluable consistency checking aid: it helps to catch cases when sockets, ifnets or any other vnet-aware structures may have leaked from one vnet to another. The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros was a result of an empirical iterative process, whith an aim to reduce recursions on CURVNET_SET() to a minimum, while still reducing the scope of CURVNET_SET() to networking only operations - the alternative would be calling CURVNET_SET() on each system call entry. In general, curvnet has to be set in three typicall cases: when processing socket-related requests from userspace or from within the kernel; when processing inbound traffic flowing from device drivers to upper layers of the networking stack, and when executing timer-driven networking functions. This change also introduces a DDB subcommand to show the list of all vnet instances. Approved by: julian (mentor)
2009-05-05 10:56:12 +00:00
#ifdef VIMAGE
if (!IS_DEFAULT_VNET(curvnet))
return;
#endif
unp_zone = uma_zcreate("unpcb", sizeof(struct unpcb), NULL, NULL,
NULL, NULL, UMA_ALIGN_PTR, 0);
if (unp_zone == NULL)
panic("unp_init");
uma_zone_set_max(unp_zone, maxsockets);
uma_zone_set_warning(unp_zone, "kern.ipc.maxsockets limit reached");
EVENTHANDLER_REGISTER(maxsockets_change, unp_zone_change,
NULL, EVENTHANDLER_PRI_ANY);
LIST_INIT(&unp_dhead);
LIST_INIT(&unp_shead);
LIST_INIT(&unp_sphead);
SLIST_INIT(&unp_defers);
TIMEOUT_TASK_INIT(taskqueue_thread, &unp_gc_task, 0, unp_gc, NULL);
TASK_INIT(&unp_defer_task, 0, unp_process_defers, NULL);
UNP_LINK_LOCK_INIT();
UNP_LIST_LOCK_INIT();
UNP_DEFERRED_LOCK_INIT();
}
static int
unp_internalize(struct mbuf **controlp, struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct mbuf *control = *controlp;
struct proc *p = td->td_proc;
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
struct filedesc *fdesc = p->p_fd;
struct bintime *bt;
struct cmsghdr *cm = mtod(control, struct cmsghdr *);
struct cmsgcred *cmcred;
struct filedescent *fde, **fdep, *fdev;
struct file *fp;
struct timeval *tv;
struct timespec *ts;
int i, *fdp;
void *data;
socklen_t clen = control->m_len, datalen;
int error, oldfds;
u_int newlen;
1994-05-24 10:09:53 +00:00
UNP_LINK_UNLOCK_ASSERT();
error = 0;
*controlp = NULL;
while (cm != NULL) {
if (sizeof(*cm) > clen || cm->cmsg_level != SOL_SOCKET
|| cm->cmsg_len > clen || cm->cmsg_len < sizeof(*cm)) {
error = EINVAL;
goto out;
}
data = CMSG_DATA(cm);
datalen = (caddr_t)cm + cm->cmsg_len - (caddr_t)data;
switch (cm->cmsg_type) {
/*
* Fill in credential information.
*/
case SCM_CREDS:
*controlp = sbcreatecontrol(NULL, sizeof(*cmcred),
SCM_CREDS, SOL_SOCKET);
if (*controlp == NULL) {
error = ENOBUFS;
goto out;
}
cmcred = (struct cmsgcred *)
CMSG_DATA(mtod(*controlp, struct cmsghdr *));
cmcred->cmcred_pid = p->p_pid;
cmcred->cmcred_uid = td->td_ucred->cr_ruid;
cmcred->cmcred_gid = td->td_ucred->cr_rgid;
cmcred->cmcred_euid = td->td_ucred->cr_uid;
cmcred->cmcred_ngroups = MIN(td->td_ucred->cr_ngroups,
CMGROUP_MAX);
for (i = 0; i < cmcred->cmcred_ngroups; i++)
cmcred->cmcred_groups[i] =
td->td_ucred->cr_groups[i];
break;
case SCM_RIGHTS:
oldfds = datalen / sizeof (int);
if (oldfds == 0)
break;
/*
* Check that all the FDs passed in refer to legal
* files. If not, reject the entire operation.
*/
fdp = data;
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
FILEDESC_SLOCK(fdesc);
for (i = 0; i < oldfds; i++, fdp++) {
fp = fget_locked(fdesc, *fdp);
if (fp == NULL) {
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
FILEDESC_SUNLOCK(fdesc);
error = EBADF;
goto out;
}
if (!(fp->f_ops->fo_flags & DFLAG_PASSABLE)) {
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
FILEDESC_SUNLOCK(fdesc);
error = EOPNOTSUPP;
goto out;
}
}
Replace custom file descriptor array sleep lock constructed using a mutex and flags with an sxlock. This leads to a significant and measurable performance improvement as a result of access to shared locking for frequent lookup operations, reduced general overhead, and reduced overhead in the event of contention. All of these are imported for threaded applications where simultaneous access to a shared file descriptor array occurs frequently. Kris has reported 2x-4x transaction rate improvements on 8-core MySQL benchmarks; smaller improvements can be expected for many workloads as a result of reduced overhead. - Generally eliminate the distinction between "fast" and regular acquisisition of the filedesc lock; the plan is that they will now all be fast. Change all locking instances to either shared or exclusive locks. - Correct a bug (pointed out by kib) in fdfree() where previously msleep() was called without the mutex held; sx_sleep() is now always called with the sxlock held exclusively. - Universally hold the struct file lock over changes to struct file, rather than the filedesc lock or no lock. Always update the f_ops field last. A further memory barrier is required here in the future (discussed with jhb). - Improve locking and reference management in linux_at(), which fails to properly acquire vnode references before using vnode pointers. Annotate improper use of vn_fullpath(), which will be replaced at a future date. In fcntl(), we conservatively acquire an exclusive lock, even though in some cases a shared lock may be sufficient, which should be revisited. The dropping of the filedesc lock in fdgrowtable() is no longer required as the sxlock can be held over the sleep operation; we should consider removing that (pointed out by attilio). Tested by: kris Discussed with: jhb, kris, attilio, jeff
2007-04-04 09:11:34 +00:00
/*
* Now replace the integer FDs with pointers to the
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
* file structure and capability rights.
*/
newlen = oldfds * sizeof(fdep[0]);
*controlp = sbcreatecontrol(NULL, newlen,
SCM_RIGHTS, SOL_SOCKET);
if (*controlp == NULL) {
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
FILEDESC_SUNLOCK(fdesc);
error = E2BIG;
goto out;
}
fdp = data;
fdep = (struct filedescent **)
CMSG_DATA(mtod(*controlp, struct cmsghdr *));
fdev = malloc(sizeof(*fdev) * oldfds, M_FILECAPS,
M_WAITOK);
for (i = 0; i < oldfds; i++, fdev++, fdp++) {
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
fde = &fdesc->fd_ofiles[*fdp];
fdep[i] = fdev;
fdep[i]->fde_file = fde->fde_file;
filecaps_copy(&fde->fde_caps,
&fdep[i]->fde_caps, true);
unp_internalize_fp(fdep[i]->fde_file);
}
Merge Capsicum overhaul: - Capability is no longer separate descriptor type. Now every descriptor has set of its own capability rights. - The cap_new(2) system call is left, but it is no longer documented and should not be used in new code. - The new syscall cap_rights_limit(2) should be used instead of cap_new(2), which limits capability rights of the given descriptor without creating a new one. - The cap_getrights(2) syscall is renamed to cap_rights_get(2). - If CAP_IOCTL capability right is present we can further reduce allowed ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed ioctls can be retrived with cap_ioctls_get(2) syscall. - If CAP_FCNTL capability right is present we can further reduce fcntls that can be used with the new cap_fcntls_limit(2) syscall and retrive them with cap_fcntls_get(2). - To support ioctl and fcntl white-listing the filedesc structure was heavly modified. - The audit subsystem, kdump and procstat tools were updated to recognize new syscalls. - Capability rights were revised and eventhough I tried hard to provide backward API and ABI compatibility there are some incompatible changes that are described in detail below: CAP_CREATE old behaviour: - Allow for openat(2)+O_CREAT. - Allow for linkat(2). - Allow for symlinkat(2). CAP_CREATE new behaviour: - Allow for openat(2)+O_CREAT. Added CAP_LINKAT: - Allow for linkat(2). ABI: Reuses CAP_RMDIR bit. - Allow to be target for renameat(2). Added CAP_SYMLINKAT: - Allow for symlinkat(2). Removed CAP_DELETE. Old behaviour: - Allow for unlinkat(2) when removing non-directory object. - Allow to be source for renameat(2). Removed CAP_RMDIR. Old behaviour: - Allow for unlinkat(2) when removing directory. Added CAP_RENAMEAT: - Required for source directory for the renameat(2) syscall. Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR): - Allow for unlinkat(2) on any object. - Required if target of renameat(2) exists and will be removed by this call. Removed CAP_MAPEXEC. CAP_MMAP old behaviour: - Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and PROT_WRITE. CAP_MMAP new behaviour: - Allow for mmap(2)+PROT_NONE. Added CAP_MMAP_R: - Allow for mmap(PROT_READ). Added CAP_MMAP_W: - Allow for mmap(PROT_WRITE). Added CAP_MMAP_X: - Allow for mmap(PROT_EXEC). Added CAP_MMAP_RW: - Allow for mmap(PROT_READ | PROT_WRITE). Added CAP_MMAP_RX: - Allow for mmap(PROT_READ | PROT_EXEC). Added CAP_MMAP_WX: - Allow for mmap(PROT_WRITE | PROT_EXEC). Added CAP_MMAP_RWX: - Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC). Renamed CAP_MKDIR to CAP_MKDIRAT. Renamed CAP_MKFIFO to CAP_MKFIFOAT. Renamed CAP_MKNODE to CAP_MKNODEAT. CAP_READ old behaviour: - Allow pread(2). - Disallow read(2), readv(2) (if there is no CAP_SEEK). CAP_READ new behaviour: - Allow read(2), readv(2). - Disallow pread(2) (CAP_SEEK was also required). CAP_WRITE old behaviour: - Allow pwrite(2). - Disallow write(2), writev(2) (if there is no CAP_SEEK). CAP_WRITE new behaviour: - Allow write(2), writev(2). - Disallow pwrite(2) (CAP_SEEK was also required). Added convinient defines: #define CAP_PREAD (CAP_SEEK | CAP_READ) #define CAP_PWRITE (CAP_SEEK | CAP_WRITE) #define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ) #define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE) #define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL) #define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W) #define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X) #define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X) #define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X) #define CAP_RECV CAP_READ #define CAP_SEND CAP_WRITE #define CAP_SOCK_CLIENT \ (CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \ CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN) #define CAP_SOCK_SERVER \ (CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \ CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \ CAP_SETSOCKOPT | CAP_SHUTDOWN) Added defines for backward API compatibility: #define CAP_MAPEXEC CAP_MMAP_X #define CAP_DELETE CAP_UNLINKAT #define CAP_MKDIR CAP_MKDIRAT #define CAP_RMDIR CAP_UNLINKAT #define CAP_MKFIFO CAP_MKFIFOAT #define CAP_MKNOD CAP_MKNODAT #define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER) Sponsored by: The FreeBSD Foundation Reviewed by: Christoph Mallon <christoph.mallon@gmx.de> Many aspects discussed with: rwatson, benl, jonathan ABI compatibility discussed with: kib
2013-03-02 00:53:12 +00:00
FILEDESC_SUNLOCK(fdesc);
break;
case SCM_TIMESTAMP:
*controlp = sbcreatecontrol(NULL, sizeof(*tv),
SCM_TIMESTAMP, SOL_SOCKET);
if (*controlp == NULL) {
error = ENOBUFS;
goto out;
}
tv = (struct timeval *)
CMSG_DATA(mtod(*controlp, struct cmsghdr *));
microtime(tv);
break;
case SCM_BINTIME:
*controlp = sbcreatecontrol(NULL, sizeof(*bt),
SCM_BINTIME, SOL_SOCKET);
if (*controlp == NULL) {
error = ENOBUFS;
goto out;
}
bt = (struct bintime *)
CMSG_DATA(mtod(*controlp, struct cmsghdr *));
bintime(bt);
break;
case SCM_REALTIME:
*controlp = sbcreatecontrol(NULL, sizeof(*ts),
SCM_REALTIME, SOL_SOCKET);
if (*controlp == NULL) {
error = ENOBUFS;
goto out;
}
ts = (struct timespec *)
CMSG_DATA(mtod(*controlp, struct cmsghdr *));
nanotime(ts);
break;
case SCM_MONOTONIC:
*controlp = sbcreatecontrol(NULL, sizeof(*ts),
SCM_MONOTONIC, SOL_SOCKET);
if (*controlp == NULL) {
error = ENOBUFS;
goto out;
}
ts = (struct timespec *)
CMSG_DATA(mtod(*controlp, struct cmsghdr *));
nanouptime(ts);
break;
default:
error = EINVAL;
goto out;
}
controlp = &(*controlp)->m_next;
if (CMSG_SPACE(datalen) < clen) {
clen -= CMSG_SPACE(datalen);
cm = (struct cmsghdr *)
((caddr_t)cm + CMSG_SPACE(datalen));
} else {
clen = 0;
cm = NULL;
}
1994-05-24 10:09:53 +00:00
}
out:
m_freem(control);
return (error);
1994-05-24 10:09:53 +00:00
}
static struct mbuf *
unp_addsockcred(struct thread *td, struct mbuf *control)
{
struct mbuf *m, *n, *n_prev;
struct sockcred *sc;
const struct cmsghdr *cm;
int ngroups;
int i;
ngroups = MIN(td->td_ucred->cr_ngroups, CMGROUP_MAX);
m = sbcreatecontrol(NULL, SOCKCREDSIZE(ngroups), SCM_CREDS, SOL_SOCKET);
if (m == NULL)
return (control);
sc = (struct sockcred *) CMSG_DATA(mtod(m, struct cmsghdr *));
sc->sc_uid = td->td_ucred->cr_ruid;
sc->sc_euid = td->td_ucred->cr_uid;
sc->sc_gid = td->td_ucred->cr_rgid;
sc->sc_egid = td->td_ucred->cr_gid;
sc->sc_ngroups = ngroups;
for (i = 0; i < sc->sc_ngroups; i++)
sc->sc_groups[i] = td->td_ucred->cr_groups[i];
/*
* Unlink SCM_CREDS control messages (struct cmsgcred), since just
* created SCM_CREDS control message (struct sockcred) has another
* format.
*/
if (control != NULL)
for (n = control, n_prev = NULL; n != NULL;) {
cm = mtod(n, struct cmsghdr *);
if (cm->cmsg_level == SOL_SOCKET &&
cm->cmsg_type == SCM_CREDS) {
if (n_prev == NULL)
control = n->m_next;
else
n_prev->m_next = n->m_next;
n = m_free(n);
} else {
n_prev = n;
n = n->m_next;
}
}
/* Prepend it to the head. */
m->m_next = control;
return (m);
}
static struct unpcb *
fptounp(struct file *fp)
{
struct socket *so;
if (fp->f_type != DTYPE_SOCKET)
return (NULL);
if ((so = fp->f_data) == NULL)
return (NULL);
if (so->so_proto->pr_domain != &localdomain)
return (NULL);
return sotounpcb(so);
}
static void
unp_discard(struct file *fp)
{
struct unp_defer *dr;
if (unp_externalize_fp(fp)) {
dr = malloc(sizeof(*dr), M_TEMP, M_WAITOK);
dr->ud_fp = fp;
UNP_DEFERRED_LOCK();
SLIST_INSERT_HEAD(&unp_defers, dr, ud_link);
UNP_DEFERRED_UNLOCK();
atomic_add_int(&unp_defers_count, 1);
taskqueue_enqueue(taskqueue_thread, &unp_defer_task);
} else
(void) closef(fp, (struct thread *)NULL);
}
static void
unp_process_defers(void *arg __unused, int pending)
{
struct unp_defer *dr;
SLIST_HEAD(, unp_defer) drl;
int count;
SLIST_INIT(&drl);
for (;;) {
UNP_DEFERRED_LOCK();
if (SLIST_FIRST(&unp_defers) == NULL) {
UNP_DEFERRED_UNLOCK();
break;
}
SLIST_SWAP(&unp_defers, &drl, unp_defer);
UNP_DEFERRED_UNLOCK();
count = 0;
while ((dr = SLIST_FIRST(&drl)) != NULL) {
SLIST_REMOVE_HEAD(&drl, ud_link);
closef(dr->ud_fp, NULL);
free(dr, M_TEMP);
count++;
}
atomic_add_int(&unp_defers_count, -count);
}
}
static void
unp_internalize_fp(struct file *fp)
{
struct unpcb *unp;
UNP_LINK_WLOCK();
if ((unp = fptounp(fp)) != NULL) {
unp->unp_file = fp;
unp->unp_msgcount++;
}
fhold(fp);
unp_rights++;
UNP_LINK_WUNLOCK();
}
static int
unp_externalize_fp(struct file *fp)
{
struct unpcb *unp;
int ret;
UNP_LINK_WLOCK();
if ((unp = fptounp(fp)) != NULL) {
unp->unp_msgcount--;
ret = 1;
} else
ret = 0;
unp_rights--;
UNP_LINK_WUNLOCK();
return (ret);
}
/*
Correct a number of serious and closely related bugs in the UNIX domain socket file descriptor garbage collection code, which is intended to detect and clear cycles of orphaned file descriptors that are "in-flight" in a socket when that socket is closed before they are received. The algorithm present was both run at poor times (resulting in recursion and reentrance), and also buggy in the presence of parallelism. In order to fix these problems, make the following changes: - When there are in-flight sockets and a UNIX domain socket is destroyed, asynchronously schedule the garbage collector, rather than running it synchronously in the current context. This avoids lock order issues when the garbage collection code reenters the UNIX domain socket code, avoiding lock order reversals, deadlocks, etc. Run the code asynchronously in a task queue. - In the garbage collector, when skipping file descriptors that have entered a closing state (i.e., have f_count == 0), re-test the FDEFER flag, and decrement unp_defer. As file descriptors can now transition to a closed state, while the garbage collector is running, it is no longer the case that unp_defer will remain an accurate count of deferred sockets in the mark portion of the GC algorithm. Otherwise, the garbage collector will loop waiting waiting for unp_defer to reach zero, which it will never do as it is skipping file descriptors that were marked in an earlier pass, but now closed. - Acquire the UNIX domain socket subsystem lock in unp_discard() when modifying the unp_rights counter, or a read/write race is risked with other threads also manipulating the counter. While here: - Remove #if 0'd code regarding acquiring the socket buffer sleep lock in the garbage collector, this is not required as we are able to use the socket buffer receive lock to protect scanning the receive buffer for in-flight file descriptors on the socket buffer. - Annotate that the description of the garbage collector implementation is increasingly inaccurate and needs to be updated. - Add counters of the number of deferred garbage collections and recycled file descriptors. This will be removed and is here temporarily for debugging purposes. With these changes in place, the unp_passfd regression test now appears to be passed consistently on UP and SMP systems for extended runs, whereas before it hung quickly or panicked, depending on which bug was triggered. Reported by: Philip Kizer <pckizer at nostrum dot com> MFC after: 2 weeks
2005-11-10 16:06:04 +00:00
* unp_defer indicates whether additional work has been defered for a future
* pass through unp_gc(). It is thread local and does not require explicit
* synchronization.
*/
static int unp_marked;
static int unp_unreachable;
Correct a number of serious and closely related bugs in the UNIX domain socket file descriptor garbage collection code, which is intended to detect and clear cycles of orphaned file descriptors that are "in-flight" in a socket when that socket is closed before they are received. The algorithm present was both run at poor times (resulting in recursion and reentrance), and also buggy in the presence of parallelism. In order to fix these problems, make the following changes: - When there are in-flight sockets and a UNIX domain socket is destroyed, asynchronously schedule the garbage collector, rather than running it synchronously in the current context. This avoids lock order issues when the garbage collection code reenters the UNIX domain socket code, avoiding lock order reversals, deadlocks, etc. Run the code asynchronously in a task queue. - In the garbage collector, when skipping file descriptors that have entered a closing state (i.e., have f_count == 0), re-test the FDEFER flag, and decrement unp_defer. As file descriptors can now transition to a closed state, while the garbage collector is running, it is no longer the case that unp_defer will remain an accurate count of deferred sockets in the mark portion of the GC algorithm. Otherwise, the garbage collector will loop waiting waiting for unp_defer to reach zero, which it will never do as it is skipping file descriptors that were marked in an earlier pass, but now closed. - Acquire the UNIX domain socket subsystem lock in unp_discard() when modifying the unp_rights counter, or a read/write race is risked with other threads also manipulating the counter. While here: - Remove #if 0'd code regarding acquiring the socket buffer sleep lock in the garbage collector, this is not required as we are able to use the socket buffer receive lock to protect scanning the receive buffer for in-flight file descriptors on the socket buffer. - Annotate that the description of the garbage collector implementation is increasingly inaccurate and needs to be updated. - Add counters of the number of deferred garbage collections and recycled file descriptors. This will be removed and is here temporarily for debugging purposes. With these changes in place, the unp_passfd regression test now appears to be passed consistently on UP and SMP systems for extended runs, whereas before it hung quickly or panicked, depending on which bug was triggered. Reported by: Philip Kizer <pckizer at nostrum dot com> MFC after: 2 weeks
2005-11-10 16:06:04 +00:00
static void
unp_accessable(struct filedescent **fdep, int fdcount)
{
struct unpcb *unp;
struct file *fp;
int i;
for (i = 0; i < fdcount; i++) {
fp = fdep[i]->fde_file;
if ((unp = fptounp(fp)) == NULL)
continue;
if (unp->unp_gcflag & UNPGC_REF)
continue;
unp->unp_gcflag &= ~UNPGC_DEAD;
unp->unp_gcflag |= UNPGC_REF;
unp_marked++;
}
}
static void
unp_gc_process(struct unpcb *unp)
{
struct socket *soa;
struct socket *so;
struct file *fp;
/* Already processed. */
if (unp->unp_gcflag & UNPGC_SCANNED)
return;
fp = unp->unp_file;
/*
* Check for a socket potentially in a cycle. It must be in a
* queue as indicated by msgcount, and this must equal the file
* reference count. Note that when msgcount is 0 the file is NULL.
*/
if ((unp->unp_gcflag & UNPGC_REF) == 0 && fp &&
unp->unp_msgcount != 0 && fp->f_count == unp->unp_msgcount) {
unp->unp_gcflag |= UNPGC_DEAD;
unp_unreachable++;
return;
}
/*
* Mark all sockets we reference with RIGHTS.
*/
so = unp->unp_socket;
if ((unp->unp_gcflag & UNPGC_IGNORE_RIGHTS) == 0) {
SOCKBUF_LOCK(&so->so_rcv);
unp_scan(so->so_rcv.sb_mb, unp_accessable);
SOCKBUF_UNLOCK(&so->so_rcv);
}
/*
* Mark all sockets in our accept queue.
*/
ACCEPT_LOCK();
TAILQ_FOREACH(soa, &so->so_comp, so_list) {
if ((sotounpcb(soa)->unp_gcflag & UNPGC_IGNORE_RIGHTS) != 0)
continue;
SOCKBUF_LOCK(&soa->so_rcv);
unp_scan(soa->so_rcv.sb_mb, unp_accessable);
SOCKBUF_UNLOCK(&soa->so_rcv);
}
ACCEPT_UNLOCK();
unp->unp_gcflag |= UNPGC_SCANNED;
}
Correct a number of serious and closely related bugs in the UNIX domain socket file descriptor garbage collection code, which is intended to detect and clear cycles of orphaned file descriptors that are "in-flight" in a socket when that socket is closed before they are received. The algorithm present was both run at poor times (resulting in recursion and reentrance), and also buggy in the presence of parallelism. In order to fix these problems, make the following changes: - When there are in-flight sockets and a UNIX domain socket is destroyed, asynchronously schedule the garbage collector, rather than running it synchronously in the current context. This avoids lock order issues when the garbage collection code reenters the UNIX domain socket code, avoiding lock order reversals, deadlocks, etc. Run the code asynchronously in a task queue. - In the garbage collector, when skipping file descriptors that have entered a closing state (i.e., have f_count == 0), re-test the FDEFER flag, and decrement unp_defer. As file descriptors can now transition to a closed state, while the garbage collector is running, it is no longer the case that unp_defer will remain an accurate count of deferred sockets in the mark portion of the GC algorithm. Otherwise, the garbage collector will loop waiting waiting for unp_defer to reach zero, which it will never do as it is skipping file descriptors that were marked in an earlier pass, but now closed. - Acquire the UNIX domain socket subsystem lock in unp_discard() when modifying the unp_rights counter, or a read/write race is risked with other threads also manipulating the counter. While here: - Remove #if 0'd code regarding acquiring the socket buffer sleep lock in the garbage collector, this is not required as we are able to use the socket buffer receive lock to protect scanning the receive buffer for in-flight file descriptors on the socket buffer. - Annotate that the description of the garbage collector implementation is increasingly inaccurate and needs to be updated. - Add counters of the number of deferred garbage collections and recycled file descriptors. This will be removed and is here temporarily for debugging purposes. With these changes in place, the unp_passfd regression test now appears to be passed consistently on UP and SMP systems for extended runs, whereas before it hung quickly or panicked, depending on which bug was triggered. Reported by: Philip Kizer <pckizer at nostrum dot com> MFC after: 2 weeks
2005-11-10 16:06:04 +00:00
static int unp_recycled;
SYSCTL_INT(_net_local, OID_AUTO, recycled, CTLFLAG_RD, &unp_recycled, 0,
"Number of unreachable sockets claimed by the garbage collector.");
1994-05-24 10:09:53 +00:00
static int unp_taskcount;
SYSCTL_INT(_net_local, OID_AUTO, taskcount, CTLFLAG_RD, &unp_taskcount, 0,
"Number of times the garbage collector has run.");
static void
Correct a number of serious and closely related bugs in the UNIX domain socket file descriptor garbage collection code, which is intended to detect and clear cycles of orphaned file descriptors that are "in-flight" in a socket when that socket is closed before they are received. The algorithm present was both run at poor times (resulting in recursion and reentrance), and also buggy in the presence of parallelism. In order to fix these problems, make the following changes: - When there are in-flight sockets and a UNIX domain socket is destroyed, asynchronously schedule the garbage collector, rather than running it synchronously in the current context. This avoids lock order issues when the garbage collection code reenters the UNIX domain socket code, avoiding lock order reversals, deadlocks, etc. Run the code asynchronously in a task queue. - In the garbage collector, when skipping file descriptors that have entered a closing state (i.e., have f_count == 0), re-test the FDEFER flag, and decrement unp_defer. As file descriptors can now transition to a closed state, while the garbage collector is running, it is no longer the case that unp_defer will remain an accurate count of deferred sockets in the mark portion of the GC algorithm. Otherwise, the garbage collector will loop waiting waiting for unp_defer to reach zero, which it will never do as it is skipping file descriptors that were marked in an earlier pass, but now closed. - Acquire the UNIX domain socket subsystem lock in unp_discard() when modifying the unp_rights counter, or a read/write race is risked with other threads also manipulating the counter. While here: - Remove #if 0'd code regarding acquiring the socket buffer sleep lock in the garbage collector, this is not required as we are able to use the socket buffer receive lock to protect scanning the receive buffer for in-flight file descriptors on the socket buffer. - Annotate that the description of the garbage collector implementation is increasingly inaccurate and needs to be updated. - Add counters of the number of deferred garbage collections and recycled file descriptors. This will be removed and is here temporarily for debugging purposes. With these changes in place, the unp_passfd regression test now appears to be passed consistently on UP and SMP systems for extended runs, whereas before it hung quickly or panicked, depending on which bug was triggered. Reported by: Philip Kizer <pckizer at nostrum dot com> MFC after: 2 weeks
2005-11-10 16:06:04 +00:00
unp_gc(__unused void *arg, int pending)
1994-05-24 10:09:53 +00:00
{
struct unp_head *heads[] = { &unp_dhead, &unp_shead, &unp_sphead,
NULL };
struct unp_head **head;
struct file *f, **unref;
struct unpcb *unp;
int i, total;
1994-05-24 10:09:53 +00:00
Correct a number of serious and closely related bugs in the UNIX domain socket file descriptor garbage collection code, which is intended to detect and clear cycles of orphaned file descriptors that are "in-flight" in a socket when that socket is closed before they are received. The algorithm present was both run at poor times (resulting in recursion and reentrance), and also buggy in the presence of parallelism. In order to fix these problems, make the following changes: - When there are in-flight sockets and a UNIX domain socket is destroyed, asynchronously schedule the garbage collector, rather than running it synchronously in the current context. This avoids lock order issues when the garbage collection code reenters the UNIX domain socket code, avoiding lock order reversals, deadlocks, etc. Run the code asynchronously in a task queue. - In the garbage collector, when skipping file descriptors that have entered a closing state (i.e., have f_count == 0), re-test the FDEFER flag, and decrement unp_defer. As file descriptors can now transition to a closed state, while the garbage collector is running, it is no longer the case that unp_defer will remain an accurate count of deferred sockets in the mark portion of the GC algorithm. Otherwise, the garbage collector will loop waiting waiting for unp_defer to reach zero, which it will never do as it is skipping file descriptors that were marked in an earlier pass, but now closed. - Acquire the UNIX domain socket subsystem lock in unp_discard() when modifying the unp_rights counter, or a read/write race is risked with other threads also manipulating the counter. While here: - Remove #if 0'd code regarding acquiring the socket buffer sleep lock in the garbage collector, this is not required as we are able to use the socket buffer receive lock to protect scanning the receive buffer for in-flight file descriptors on the socket buffer. - Annotate that the description of the garbage collector implementation is increasingly inaccurate and needs to be updated. - Add counters of the number of deferred garbage collections and recycled file descriptors. This will be removed and is here temporarily for debugging purposes. With these changes in place, the unp_passfd regression test now appears to be passed consistently on UP and SMP systems for extended runs, whereas before it hung quickly or panicked, depending on which bug was triggered. Reported by: Philip Kizer <pckizer at nostrum dot com> MFC after: 2 weeks
2005-11-10 16:06:04 +00:00
unp_taskcount++;
UNP_LIST_LOCK();
/*
* First clear all gc flags from previous runs, apart from
* UNPGC_IGNORE_RIGHTS.
*/
for (head = heads; *head != NULL; head++)
LIST_FOREACH(unp, *head, unp_link)
unp->unp_gcflag =
(unp->unp_gcflag & UNPGC_IGNORE_RIGHTS);
/*
* Scan marking all reachable sockets with UNPGC_REF. Once a socket
* is reachable all of the sockets it references are reachable.
* Stop the scan once we do a complete loop without discovering
* a new reachable socket.
*/
1994-05-24 10:09:53 +00:00
do {
unp_unreachable = 0;
unp_marked = 0;
for (head = heads; *head != NULL; head++)
LIST_FOREACH(unp, *head, unp_link)
unp_gc_process(unp);
} while (unp_marked);
UNP_LIST_UNLOCK();
if (unp_unreachable == 0)
return;
/*
* Allocate space for a local list of dead unpcbs.
*/
unref = malloc(unp_unreachable * sizeof(struct file *),
M_TEMP, M_WAITOK);
/*
* Iterate looking for sockets which have been specifically marked
* as as unreachable and store them locally.
*/
UNP_LINK_RLOCK();
UNP_LIST_LOCK();
for (total = 0, head = heads; *head != NULL; head++)
LIST_FOREACH(unp, *head, unp_link)
if ((unp->unp_gcflag & UNPGC_DEAD) != 0) {
f = unp->unp_file;
if (unp->unp_msgcount == 0 || f == NULL ||
f->f_count != unp->unp_msgcount)
continue;
unref[total++] = f;
fhold(f);
KASSERT(total <= unp_unreachable,
("unp_gc: incorrect unreachable count."));
}
UNP_LIST_UNLOCK();
UNP_LINK_RUNLOCK();
/*
* Now flush all sockets, free'ing rights. This will free the
* struct files associated with these sockets but leave each socket
* with one remaining ref.
*/
for (i = 0; i < total; i++) {
struct socket *so;
so = unref[i]->f_data;
CURVNET_SET(so->so_vnet);
sorflush(so);
CURVNET_RESTORE();
}
/*
* And finally release the sockets so they can be reclaimed.
*/
for (i = 0; i < total; i++)
fdrop(unref[i], NULL);
unp_recycled += total;
free(unref, M_TEMP);
1994-05-24 10:09:53 +00:00
}
static void
unp_dispose_mbuf(struct mbuf *m)
1994-05-24 10:09:53 +00:00
{
1994-05-24 10:09:53 +00:00
if (m)
unp_scan(m, unp_freerights);
1994-05-24 10:09:53 +00:00
}
/*
* Synchronize against unp_gc, which can trip over data as we are freeing it.
*/
static void
unp_dispose(struct socket *so)
{
struct unpcb *unp;
unp = sotounpcb(so);
UNP_LIST_LOCK();
unp->unp_gcflag |= UNPGC_IGNORE_RIGHTS;
UNP_LIST_UNLOCK();
unp_dispose_mbuf(so->so_rcv.sb_mb);
}
static void
unp_scan(struct mbuf *m0, void (*op)(struct filedescent **, int))
1994-05-24 10:09:53 +00:00
{
struct mbuf *m;
struct cmsghdr *cm;
void *data;
socklen_t clen, datalen;
1994-05-24 10:09:53 +00:00
while (m0 != NULL) {
for (m = m0; m; m = m->m_next) {
if (m->m_type != MT_CONTROL)
continue;
cm = mtod(m, struct cmsghdr *);
clen = m->m_len;
while (cm != NULL) {
if (sizeof(*cm) > clen || cm->cmsg_len > clen)
break;
data = CMSG_DATA(cm);
datalen = (caddr_t)cm + cm->cmsg_len
- (caddr_t)data;
if (cm->cmsg_level == SOL_SOCKET &&
cm->cmsg_type == SCM_RIGHTS) {
(*op)(data, datalen /
sizeof(struct filedescent *));
}
if (CMSG_SPACE(datalen) < clen) {
clen -= CMSG_SPACE(datalen);
cm = (struct cmsghdr *)
((caddr_t)cm + CMSG_SPACE(datalen));
} else {
clen = 0;
cm = NULL;
}
1994-05-24 10:09:53 +00:00
}
}
2014-07-17 05:21:16 +00:00
m0 = m0->m_nextpkt;
1994-05-24 10:09:53 +00:00
}
}
/*
* A helper function called by VFS before socket-type vnode reclamation.
* For an active vnode it clears unp_vnode pointer and decrements unp_vnode
* use count.
*/
void
vfs_unp_reclaim(struct vnode *vp)
{
struct socket *so;
struct unpcb *unp;
int active;
ASSERT_VOP_ELOCKED(vp, "vfs_unp_reclaim");
KASSERT(vp->v_type == VSOCK,
("vfs_unp_reclaim: vp->v_type != VSOCK"));
active = 0;
UNP_LINK_WLOCK();
VOP_UNP_CONNECT(vp, &so);
if (so == NULL)
goto done;
unp = sotounpcb(so);
if (unp == NULL)
goto done;
UNP_PCB_LOCK(unp);
if (unp->unp_vnode == vp) {
VOP_UNP_DETACH(vp);
unp->unp_vnode = NULL;
active = 1;
}
UNP_PCB_UNLOCK(unp);
done:
UNP_LINK_WUNLOCK();
if (active)
vunref(vp);
}
#ifdef DDB
static void
db_print_indent(int indent)
{
int i;
for (i = 0; i < indent; i++)
db_printf(" ");
}
static void
db_print_unpflags(int unp_flags)
{
int comma;
comma = 0;
if (unp_flags & UNP_HAVEPC) {
db_printf("%sUNP_HAVEPC", comma ? ", " : "");
comma = 1;
}
if (unp_flags & UNP_HAVEPCCACHED) {
db_printf("%sUNP_HAVEPCCACHED", comma ? ", " : "");
comma = 1;
}
if (unp_flags & UNP_WANTCRED) {
db_printf("%sUNP_WANTCRED", comma ? ", " : "");
comma = 1;
}
if (unp_flags & UNP_CONNWAIT) {
db_printf("%sUNP_CONNWAIT", comma ? ", " : "");
comma = 1;
}
if (unp_flags & UNP_CONNECTING) {
db_printf("%sUNP_CONNECTING", comma ? ", " : "");
comma = 1;
}
if (unp_flags & UNP_BINDING) {
db_printf("%sUNP_BINDING", comma ? ", " : "");
comma = 1;
}
}
static void
db_print_xucred(int indent, struct xucred *xu)
{
int comma, i;
db_print_indent(indent);
db_printf("cr_version: %u cr_uid: %u cr_ngroups: %d\n",
xu->cr_version, xu->cr_uid, xu->cr_ngroups);
db_print_indent(indent);
db_printf("cr_groups: ");
comma = 0;
for (i = 0; i < xu->cr_ngroups; i++) {
db_printf("%s%u", comma ? ", " : "", xu->cr_groups[i]);
comma = 1;
}
db_printf("\n");
}
static void
db_print_unprefs(int indent, struct unp_head *uh)
{
struct unpcb *unp;
int counter;
counter = 0;
LIST_FOREACH(unp, uh, unp_reflink) {
if (counter % 4 == 0)
db_print_indent(indent);
db_printf("%p ", unp);
if (counter % 4 == 3)
db_printf("\n");
counter++;
}
if (counter != 0 && counter % 4 != 0)
db_printf("\n");
}
DB_SHOW_COMMAND(unpcb, db_show_unpcb)
{
struct unpcb *unp;
if (!have_addr) {
db_printf("usage: show unpcb <addr>\n");
return;
}
unp = (struct unpcb *)addr;
db_printf("unp_socket: %p unp_vnode: %p\n", unp->unp_socket,
unp->unp_vnode);
db_printf("unp_ino: %ju unp_conn: %p\n", (uintmax_t)unp->unp_ino,
unp->unp_conn);
db_printf("unp_refs:\n");
db_print_unprefs(2, &unp->unp_refs);
/* XXXRW: Would be nice to print the full address, if any. */
db_printf("unp_addr: %p\n", unp->unp_addr);
Replace 4.4BSD Lite's unix domain socket backpressure hack with a cleaner mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically changed the sending sockbuf's high water mark whenever adding or removing data from the receiving sockbuf. It worked for stream sockets, but it never worked for SOCK_SEQPACKET sockets because of their atomic nature. If the sockbuf was partially full, it might return EMSGSIZE instead of blocking. The new solution is based on DragonFlyBSD's fix from commit 3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that sockbuf, causing sosend_generic and friends to block. uipc_rcvd will likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no longer need to call chgsbsize() on every send and receive because they don't change the sockbuf's high water mark. Also, uipc_sense no longer needs to acquire the UIPC linkage lock, because it's simpler to compute the st_blksizes. There is one drawback: since sbspace() will only ever return 0 or the maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum size by at most one packet of size less than the max. I don't think that's a serious problem. In fact, I'm not even positive that FreeBSD guarantees a socket will always stay within its nominal size limit. sys/sys/sockbuf.h Add the SB_STOP flag and adjust sbspace() sys/sys/unpcb.h Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb. sys/kern/uipc_usrreq.c Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP backpressure mechanism. Removing obsolete unpcb fields from db_show_unpcb. tests/sys/kern/unix_seqpacket_test.c Clear expected failures from ATF. Obtained from: DragonFly BSD PR: kern/185812 Reviewed by: silence from freebsd-net@ and rwatson@ MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
2014-03-13 18:42:12 +00:00
db_printf("unp_gencnt: %llu\n",
(unsigned long long)unp->unp_gencnt);
db_printf("unp_flags: %x (", unp->unp_flags);
db_print_unpflags(unp->unp_flags);
db_printf(")\n");
db_printf("unp_peercred:\n");
db_print_xucred(2, &unp->unp_peercred);
db_printf("unp_refcount: %u\n", unp->unp_refcount);
}
#endif