d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c697fb7f7c
freebsd-skq/etc/mtree/BSD.root.dist

129 lines
1.7 KiB
Plaintext
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-27 23:37:10 +00:00
# $FreeBSD$
Fix script in README to actually work, empty lines produce as much a diff as lines with the wrong stuff on it. Add references in mtree data files to the README.
1999-08-23 05:12:43 +00:00
#
Mention the path to the README file in the header comment. Submitted by: Rich Morin <rdm@cfcl.com>
2001-06-26 13:50:33 +00:00
# Please see the file src/etc/mtree/README before making changes to this file.
Initial import of 386BSD 0.1 othersrc/etc
1993-06-20 13:41:45 +00:00
#
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
/set type=dir uname=root gname=wheel mode=0755
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
.
Simplify these now that default owner is root.wheel. Partially reviewed by: bde
1998-09-19 18:50:27 +00:00
bin
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Add /boot, while I happen to be thinking about it.
1998-09-30 22:27:27 +00:00
boot
Gentlemen, I present you /boot/defaults. Just for the sake of symmetry. Reviewed by: jkh (eyebrown raised a little, I concede)
1999-03-10 03:33:17 +00:00
defaults
..
Create a /boot/dtb directory to house DTB blobs. The flattened device tree support includes a device tree source compiler dtc(8) which converts .dts files into .dtb files. /boot/loader will load dtb files from this directory by default, allowing for fewer differences between images for different SoCs. Compiled dts files will wind up here eventually as an alternative to embedding them into the kernel. Document this in hier(7), as well as add missing entries for /boot/firmware and /boot/zfs, though the latter two should only be considered place holders if someone wants to make them better.
2014-09-03 21:59:07 +00:00
dtb
mtree: Add dtb subdir to the mtree file makefs will fails otherwise Reported by: emaste MFC after: 1 week
2019-02-07 18:54:25 +00:00
allwinner tags=package=runtime
..
Move /boot/overlays to /boot/dtb/overlays The former is fairly vague; these are FDT overlays to be applied to the running system, so /boot/dtb is a sensible location to put it without cluttering up /boot/dtb even further if desired.
2018-03-19 16:16:12 +00:00
overlays tags=package=runtime
..
mtree: Add dtb subdir to the mtree file makefs will fails otherwise Reported by: emaste MFC after: 1 week
2019-02-07 18:54:25 +00:00
rockchip tags=package=runtime
..
Create a /boot/dtb directory to house DTB blobs. The flattened device tree support includes a device tree source compiler dtc(8) which converts .dts files into .dtb files. /boot/loader will load dtb files from this directory by default, allowing for fewer differences between images for different SoCs. Compiled dts files will wind up here eventually as an alternative to embedding them into the kernel. Document this in hier(7), as well as add missing entries for /boot/firmware and /boot/zfs, though the latter two should only be considered place holders if someone wants to make them better.
2014-09-03 21:59:07 +00:00
..
Standardize EFI's ESP mount point. Mount the UEFI ESP on /boot/efi. No current system uses this by default, but there are many ad-hoc schemes that do this in /efi or /esp or /uefi and adding a new directory at the top-level would have a much higher likelihood of collision. Document this in /etc/mtree/BSD.root.mtree and create EFIDIR and related variables in bsd.own.mk. Differential Revision: https://reviews.freebsd.org/D21344
2019-11-20 21:06:29 +00:00
efi
..
Add /boot/firmware as iwi(4) now reads its firmware there. Reminded by: flz
2005-12-11 15:21:18 +00:00
firmware
..
Add /boot/lua.
2018-02-13 17:42:10 +00:00
lua
..
Apparently, people do not listen for a plea to look into the README file before making changes here. Fix them once again.
2001-02-15 12:25:48 +00:00
kernel
..
modules
..
powerpc/boot: Move ubldr to /boot/uboot, and make this a separate filesystem Summary: Now that mpc85xx can boot via ubldr, move ubldr to a separate filesystem, mounted on /boot/uboot, so that a fresh install can boot correctly. Reviewed By: nwhitehorn Differential Revision: https://reviews.freebsd.org/D18709
2019-02-18 01:57:47 +00:00
uboot
..
Move zpool.cache from /etc/zfs/ to /boot/zfs/, so we can keep it on dedicated /boot/ file system and use ZFS for the root file system.
2007-04-08 23:59:39 +00:00
zfs
..
Add /boot, while I happen to be thinking about it.
1998-09-30 22:27:27 +00:00
..
No tabs here.
2003-03-11 11:14:34 +00:00
dev mode=0555
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
etc
Change our default XF86Config location from /etc/ to /etc/X11/, following the lead of The XFree86 Project's default. Approved by: Murray
2002-06-10 04:47:26 +00:00
X11
..
Create /etc/authpf, used by authpf(8) and authpf-noip(8). MFC after: 1 week
2018-12-13 12:58:42 +00:00
authpf
..
Bring in the new automounter, similar to what's provided in most other UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format, has proper kernel support, and LDAP integration. There are still a few outstanding problems; they will be fixed shortly. Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions) Phabric: D523 MFC after: 2 weeks Relnotes: yes Sponsored by: The FreeBSD Foundation
2014-08-17 09:44:42 +00:00
autofs
..
Connect /etc/bluetooth and /usr/share/examples/netgraph/bluetooth to the build. Reviewed by: imp, simon Approved by: imp (mentor)
2003-10-26 19:09:12 +00:00
bluetooth
..
cron(8): add support for /etc/cron.d and /usr/local/etc/cron.d For automation tools it is way easier to maintain files in directories rather than modifying /etc/crontab. The files in those directories are in the same format as /etc/crontab Reviewed by: adrian MFC after: 2 weeks Relnotes: yes Sponsored by: Gandi.net Differential Revision: https://reviews.freebsd.org/D8400
2016-10-31 18:20:12 +00:00
cron.d
..
This cleans up all the white space errors so that the next commit is easier to understand.
1999-08-24 03:51:34 +00:00
defaults
..
Add /etc/devd/ and move hardware specific configuration there. This makes it easier to maintain custom rules for non-system things like ACPI hotkeys. /etc/devd.conf is already set up to check this directory, no change needed there.
2008-12-17 19:12:30 +00:00
devd
..
Import Dragonfly Mail Agent into base system It is a small and lightweight Mail Transport Agent. It accepts mails from locally installed Mail User Agents (MUA) and delivers the mails either locally or to a remote destination. Remote delivery includes several features like TLS/SSL support, SMTP authentication and NULLCLIENT. Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL Reviewed by: peter Discussed with: emaste, bz, peter
2014-02-21 07:26:49 +00:00
dma
..
Add a new extensible GSS-API layer which can support GSS-API plugins, similar the the Solaris implementation. Repackage the krb5 GSS mechanism as a plugin library for the new implementation. This also includes a comprehensive set of manpages for the GSS-API functions with text mostly taken from the RFC. Reviewed by: Love Hörnquist Åstrand <lha@it.su.se>, ru (build system), des (openssh parts)
2005-12-29 14:40:22 +00:00
gss
..
This cleans up all the white space errors so that the next commit is easier to understand.
1999-08-24 03:51:34 +00:00
mail
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
mtree
Add /etc/ntp to hold keys for ntpd.
2004-07-21 10:14:10 +00:00
..
- Include /etc/newsyslog.conf.d/* and /usr/local/etc/newsyslog.conf.d/* by default for newsyslog(8). The /usr/local/etc/newsyslog.conf.d will give packages an opportunity to install a default configuration to handle their own log files. MFC after: 2 weeks Relnotes: yes
2014-05-20 03:00:20 +00:00
newsyslog.conf.d
..
Fixed style of previous commit.
2004-07-27 12:31:38 +00:00
ntp mode=0700
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
..
Oops! Previous commit used tabs instead of spaces.
2001-12-05 21:11:24 +00:00
pam.d
..
Apparently, people do not listen for a plea to look into the README file before making changes here. Fix them once again.
2001-02-15 12:25:48 +00:00
periodic
daily
..
monthly
..
Long ago, there was just /etc/daily. Then /etc/security was split out of /etc/daily. Some time later, /etc/daily became a set of periodic(8) scripts. Now, this evolution continues, and /etc/security has been broken into periodic(8) scripts to make local customization easier and more maintainable. Reviewed by: ru Approved by: ru
2001-12-07 23:57:39 +00:00
security
..
Apparently, people do not listen for a plea to look into the README file before making changes here. Fix them once again.
2001-02-15 12:25:48 +00:00
weekly
..
..
Fix indentation Reported by: zont Approved by: bapt (implicit) MFC after: 2 days X-MFC-With: r257145
2013-10-26 16:19:14 +00:00
pkg
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
ppp
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Add support for /etc/rc.conf.d/<service> subdirectories. This is particularly useful for services such as "network" (netif) where each interface can now have its own separate configuration file. Add /etc/rc.conf.d to the mtree file so it is always present. MFC after: 3 days
2014-08-23 10:51:37 +00:00
rc.conf.d
..
Got my r's and t's mixed up. Fix sorting.
2001-06-22 07:26:08 +00:00
rc.d
..
Add /etc/security, into which the BSM audit configuration files will be installed. This is the same directory as found on Solaris. NB: In FreeBSD 4.x and earlier, a script (file) named /etc/security exists. Does mergemaster need to be taught how to replace a file with a directory? Submitted by: wsalamon Obtained from: TrustedBSD Project
2005-05-30 20:51:13 +00:00
security
..
Apparently, people do not listen for a plea to look into the README file before making changes here. Fix them once again.
2001-02-15 12:25:48 +00:00
ssh
..
ssl
..
syslogd(8): add an 'include' keyword All the '.conf' files not beginning with a '.' contained int he directory following the keyword will be included. This keyword can only be used in the first level configuration files. Modify the default syslogd.conf to 'include' /etc/syslog.d and /usr/local/etc/syslog.d It simplify a lot handling of syslog from automation tools. Reviewed by: markj, kib (via irc) Approved by: markj MFC after: 2 weeks Relnotes: yes Differential Revision: https://reviews.freebsd.org/D8402
2016-11-01 01:41:24 +00:00
syslog.d
..
Connect ZFS to the build.
2007-04-06 02:13:30 +00:00
zfs
..
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Add /lib and /libexec directories. These are part of the dynamic root support.
2003-08-17 07:48:09 +00:00
lib
Convert casperd(8) daemon to the libcasper. After calling the cap_init(3) function Casper will fork from it's original process, using pdfork(2). Forking from a process has a lot of advantages: 1. We have the same cwd as the original process. 2. The same uid, gid and groups. 3. The same MAC labels. 4. The same descriptor table. 5. The same routing table. 6. The same umask. 7. The same cpuset(1). From now services are also in form of libraries. We also removed libcapsicum at all and converts existing program using Casper to new architecture. Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste Partially reviewed by: drysdale@google.com, bdrewery Approved by: pjd (mentor) Differential Revision: https://reviews.freebsd.org/D4277
2016-02-25 18:23:40 +00:00
casper
..
- Install includes used by STRIPE and NOP GEOM classes. - Create needed directories. Supported by: Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:29:26 +00:00
geom
..
Dynamically load .so modules to expand functionality o Dynamically load all the .so files found in /libexec/nvmecontrol and /usr/local/libexec/nvmecontrol. o Link nvmecontrol -rdynamic so that its symbols are visible to the libraries we load. o Create concatinated linker sets that we dynamically expand. o Add the linked-in top and logpage linker sets to the mirrors for them and add those sets to the mirrors when we load a new .so. o Add some macros to help hide the names of the linker sets. o Update the man page. Sponsored by: Netflix Differential Revision: https://reviews.freebsd.org/D18455 fold
2018-12-06 22:58:26 +00:00
nvmecontrol
..
Add /lib and /libexec directories. These are part of the dynamic root support.
2003-08-17 07:48:09 +00:00
..
libexec
Add resolvconf(8) which manages resolv.conf.
2011-03-18 12:18:52 +00:00
resolvconf
..
Add /lib and /libexec directories. These are part of the dynamic root support.
2003-08-17 07:48:09 +00:00
..
Add a /media to FreeBSD. /media is a directory designed to contain subdirectories that will be used for removable media mount points (i.e. mount points for CDs, floppy disks, USB drives, etc.). While the primary purpose of /media is to provide a location for HAL (http://www.freedesktop.org/wiki/Software_2fhal) to mount volumes, it could be used by any application that needs to manage removable media volumes. Discussed on: arch@ Approved by: mux MFC after: 1 week
2006-05-10 18:53:15 +00:00
media
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
mnt
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Create /net by default, for autofs. MFC after: 2 weeks
2017-05-25 08:34:24 +00:00
net
..
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
proc mode=0555
..
Add /rescue bits. This basically encompasses all of bin and sbin along with a couple of bits from usr.bin in a crunchgen'd binary. Submitted by: Tim Kientzle <kientzle@acm.org>
2003-06-29 18:35:37 +00:00
rescue
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
root
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Simplify these now that default owner is root.wheel. Partially reviewed by: bde
1998-09-19 18:50:27 +00:00
sbin
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Old stuff laying around: Don't override /tmp to the same uid/gid as the previous /set defaults
1998-12-16 05:45:58 +00:00
tmp mode=01777
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
usr
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
var
These are mtree generated versions of these files using the new mtree options. I will be updating these shortly to remove some old stuff and add some new stuff. These currently produce the exact same trees as they did.
1994-09-19 01:40:40 +00:00
..
Initial import of 386BSD 0.1 othersrc/etc
1993-06-20 13:41:45 +00:00
..
Reference in New Issue Copy Permalink