Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*-
|
|
|
|
* Copyright (c) 2009 The FreeBSD Foundation
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This software was developed by Rui Paulo under sponsorship from the
|
|
|
|
* FreeBSD Foundation.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IEEE 802.11s Mesh Point (MBSS) support.
|
|
|
|
*
|
|
|
|
* Based on March 2009, D3.0 802.11s draft spec.
|
|
|
|
*/
|
|
|
|
#include "opt_inet.h"
|
|
|
|
#include "opt_wlan.h"
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/mbuf.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/sockio.h>
|
|
|
|
#include <sys/endian.h>
|
|
|
|
#include <sys/errno.h>
|
|
|
|
#include <sys/proc.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_llc.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
#include <net80211/ieee80211_action.h>
|
|
|
|
#include <net80211/ieee80211_input.h>
|
|
|
|
#include <net80211/ieee80211_mesh.h>
|
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
static void mesh_rt_flush_invalid(struct ieee80211vap *);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static int mesh_select_proto_path(struct ieee80211vap *, const char *);
|
|
|
|
static int mesh_select_proto_metric(struct ieee80211vap *, const char *);
|
|
|
|
static void mesh_vattach(struct ieee80211vap *);
|
|
|
|
static int mesh_newstate(struct ieee80211vap *, enum ieee80211_state, int);
|
2009-07-20 19:12:08 +00:00
|
|
|
static void mesh_rt_cleanup_cb(void *);
|
2009-07-13 18:23:58 +00:00
|
|
|
static void mesh_linkchange(struct ieee80211_node *,
|
|
|
|
enum ieee80211_mesh_mlstate);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void mesh_checkid(void *, struct ieee80211_node *);
|
|
|
|
static uint32_t mesh_generateid(struct ieee80211vap *);
|
|
|
|
static int mesh_checkpseq(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN], uint32_t);
|
|
|
|
static struct ieee80211_node *
|
|
|
|
mesh_find_txnode(struct ieee80211vap *,
|
|
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
|
|
static void mesh_forward(struct ieee80211vap *, struct mbuf *,
|
|
|
|
const struct ieee80211_meshcntl *);
|
|
|
|
static int mesh_input(struct ieee80211_node *, struct mbuf *, int, int);
|
|
|
|
static void mesh_recv_mgmt(struct ieee80211_node *, struct mbuf *, int,
|
|
|
|
int, int);
|
2010-03-18 11:06:38 +00:00
|
|
|
static void mesh_recv_ctl(struct ieee80211_node *, struct mbuf *, int);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static void mesh_peer_timeout_setup(struct ieee80211_node *);
|
|
|
|
static void mesh_peer_timeout_backoff(struct ieee80211_node *);
|
|
|
|
static void mesh_peer_timeout_cb(void *);
|
|
|
|
static __inline void
|
|
|
|
mesh_peer_timeout_stop(struct ieee80211_node *);
|
|
|
|
static int mesh_verify_meshid(struct ieee80211vap *, const uint8_t *);
|
|
|
|
static int mesh_verify_meshconf(struct ieee80211vap *, const uint8_t *);
|
2009-09-22 18:18:14 +00:00
|
|
|
static int mesh_verify_meshpeer(struct ieee80211vap *, uint8_t,
|
|
|
|
const uint8_t *);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint32_t mesh_airtime_calc(struct ieee80211_node *);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Timeout values come from the specification and are in milliseconds.
|
|
|
|
*/
|
2011-11-07 15:43:11 +00:00
|
|
|
static SYSCTL_NODE(_net_wlan, OID_AUTO, mesh, CTLFLAG_RD, 0,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
"IEEE 802.11s parameters");
|
|
|
|
static int ieee80211_mesh_retrytimeout = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_mesh, OID_AUTO, retrytimeout, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_mesh_retrytimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"Retry timeout (msec)");
|
|
|
|
static int ieee80211_mesh_holdingtimeout = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_mesh, OID_AUTO, holdingtimeout, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_mesh_holdingtimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"Holding state timeout (msec)");
|
|
|
|
static int ieee80211_mesh_confirmtimeout = -1;
|
|
|
|
SYSCTL_PROC(_net_wlan_mesh, OID_AUTO, confirmtimeout, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_mesh_confirmtimeout, 0, ieee80211_sysctl_msecs_ticks, "I",
|
|
|
|
"Confirm state timeout (msec)");
|
|
|
|
static int ieee80211_mesh_maxretries = 2;
|
|
|
|
SYSCTL_INT(_net_wlan_mesh, OID_AUTO, maxretries, CTLTYPE_INT | CTLFLAG_RW,
|
|
|
|
&ieee80211_mesh_maxretries, 0,
|
|
|
|
"Maximum retries during peer link establishment");
|
|
|
|
|
|
|
|
static const uint8_t broadcastaddr[IEEE80211_ADDR_LEN] =
|
|
|
|
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
|
|
|
|
|
|
|
|
static ieee80211_recv_action_func mesh_recv_action_meshpeering_open;
|
|
|
|
static ieee80211_recv_action_func mesh_recv_action_meshpeering_confirm;
|
|
|
|
static ieee80211_recv_action_func mesh_recv_action_meshpeering_close;
|
|
|
|
static ieee80211_recv_action_func mesh_recv_action_meshlmetric_req;
|
|
|
|
static ieee80211_recv_action_func mesh_recv_action_meshlmetric_rep;
|
|
|
|
|
|
|
|
static ieee80211_send_action_func mesh_send_action_meshpeering_open;
|
|
|
|
static ieee80211_send_action_func mesh_send_action_meshpeering_confirm;
|
|
|
|
static ieee80211_send_action_func mesh_send_action_meshpeering_close;
|
|
|
|
static ieee80211_send_action_func mesh_send_action_meshlink_request;
|
|
|
|
static ieee80211_send_action_func mesh_send_action_meshlink_reply;
|
|
|
|
|
|
|
|
static const struct ieee80211_mesh_proto_metric mesh_metric_airtime = {
|
|
|
|
.mpm_descr = "AIRTIME",
|
2009-10-12 10:08:58 +00:00
|
|
|
.mpm_ie = IEEE80211_MESHCONF_METRIC_AIRTIME,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
.mpm_metric = mesh_airtime_calc,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ieee80211_mesh_proto_path mesh_proto_paths[4];
|
|
|
|
static struct ieee80211_mesh_proto_metric mesh_proto_metrics[4];
|
|
|
|
|
|
|
|
#define MESH_RT_LOCK(ms) mtx_lock(&(ms)->ms_rt_lock)
|
2009-07-20 19:12:08 +00:00
|
|
|
#define MESH_RT_LOCK_ASSERT(ms) mtx_assert(&(ms)->ms_rt_lock, MA_OWNED)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
#define MESH_RT_UNLOCK(ms) mtx_unlock(&(ms)->ms_rt_lock)
|
|
|
|
|
|
|
|
MALLOC_DEFINE(M_80211_MESH_RT, "80211mesh", "802.11s routing table");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Helper functions to manipulate the Mesh routing table.
|
|
|
|
*/
|
2009-07-20 19:12:08 +00:00
|
|
|
|
|
|
|
static struct ieee80211_mesh_route *
|
|
|
|
mesh_rt_find_locked(struct ieee80211_mesh_state *ms,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN])
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
|
|
|
|
MESH_RT_LOCK_ASSERT(ms);
|
|
|
|
|
|
|
|
TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) {
|
|
|
|
if (IEEE80211_ADDR_EQ(dest, rt->rt_dest))
|
|
|
|
return rt;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct ieee80211_mesh_route *
|
|
|
|
mesh_rt_add_locked(struct ieee80211_mesh_state *ms,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN])
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
|
|
|
|
KASSERT(!IEEE80211_ADDR_EQ(broadcastaddr, dest),
|
|
|
|
("%s: adding broadcast to the routing table", __func__));
|
|
|
|
|
|
|
|
MESH_RT_LOCK_ASSERT(ms);
|
|
|
|
|
|
|
|
rt = malloc(ALIGN(sizeof(struct ieee80211_mesh_route)) +
|
|
|
|
ms->ms_ppath->mpp_privlen, M_80211_MESH_RT, M_NOWAIT | M_ZERO);
|
|
|
|
if (rt != NULL) {
|
|
|
|
IEEE80211_ADDR_COPY(rt->rt_dest, dest);
|
|
|
|
rt->rt_priv = (void *)ALIGN(&rt[1]);
|
2009-07-21 19:38:22 +00:00
|
|
|
rt->rt_crtime = ticks;
|
2009-07-20 19:12:08 +00:00
|
|
|
TAILQ_INSERT_TAIL(&ms->ms_routes, rt, rt_next);
|
|
|
|
}
|
|
|
|
return rt;
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
struct ieee80211_mesh_route *
|
|
|
|
ieee80211_mesh_rt_find(struct ieee80211vap *vap,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN])
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
|
|
|
|
MESH_RT_LOCK(ms);
|
2009-07-20 19:12:08 +00:00
|
|
|
rt = mesh_rt_find_locked(ms, dest);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
MESH_RT_UNLOCK(ms);
|
2009-07-20 19:12:08 +00:00
|
|
|
return rt;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
struct ieee80211_mesh_route *
|
|
|
|
ieee80211_mesh_rt_add(struct ieee80211vap *vap,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN])
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
|
|
|
|
KASSERT(ieee80211_mesh_rt_find(vap, dest) == NULL,
|
|
|
|
("%s: duplicate entry in the routing table", __func__));
|
|
|
|
KASSERT(!IEEE80211_ADDR_EQ(vap->iv_myaddr, dest),
|
|
|
|
("%s: adding self to the routing table", __func__));
|
|
|
|
|
|
|
|
MESH_RT_LOCK(ms);
|
2009-07-20 19:12:08 +00:00
|
|
|
rt = mesh_rt_add_locked(ms, dest);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
return rt;
|
|
|
|
}
|
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
/*
|
|
|
|
* Add a proxy route (as needed) for the specified destination.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
ieee80211_mesh_proxy_check(struct ieee80211vap *vap,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN])
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
|
|
|
|
MESH_RT_LOCK(ms);
|
|
|
|
rt = mesh_rt_find_locked(ms, dest);
|
|
|
|
if (rt == NULL) {
|
|
|
|
rt = mesh_rt_add_locked(ms, dest);
|
|
|
|
if (rt == NULL) {
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
|
|
|
|
"%s", "unable to add proxy entry");
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
} else {
|
2009-07-27 14:22:09 +00:00
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
|
|
|
|
"%s", "add proxy entry");
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_ADDR_COPY(rt->rt_nexthop, vap->iv_myaddr);
|
|
|
|
rt->rt_flags |= IEEE80211_MESHRT_FLAGS_VALID
|
|
|
|
| IEEE80211_MESHRT_FLAGS_PROXY;
|
|
|
|
}
|
|
|
|
/* XXX assert PROXY? */
|
|
|
|
} else if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0) {
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
/*
|
|
|
|
* Fix existing entry created by received frames from
|
|
|
|
* stations that have some memory of dest. We also
|
|
|
|
* flush any frames held on the staging queue; delivering
|
|
|
|
* them is too much trouble right now.
|
|
|
|
*/
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
|
|
|
|
"%s", "fix proxy entry");
|
|
|
|
IEEE80211_ADDR_COPY(rt->rt_nexthop, vap->iv_myaddr);
|
|
|
|
rt->rt_flags |= IEEE80211_MESHRT_FLAGS_VALID
|
|
|
|
| IEEE80211_MESHRT_FLAGS_PROXY;
|
|
|
|
/* XXX belongs in hwmp */
|
|
|
|
ieee80211_ageq_drain_node(&ic->ic_stageq,
|
|
|
|
(void *)(uintptr_t) ieee80211_mac_hash(ic, dest));
|
|
|
|
/* XXX stat? */
|
|
|
|
}
|
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline void
|
|
|
|
mesh_rt_del(struct ieee80211_mesh_state *ms, struct ieee80211_mesh_route *rt)
|
|
|
|
{
|
|
|
|
TAILQ_REMOVE(&ms->ms_routes, rt, rt_next);
|
|
|
|
free(rt, M_80211_MESH_RT);
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
void
|
|
|
|
ieee80211_mesh_rt_del(struct ieee80211vap *vap,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN])
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt, *next;
|
|
|
|
|
|
|
|
MESH_RT_LOCK(ms);
|
|
|
|
TAILQ_FOREACH_SAFE(rt, &ms->ms_routes, rt_next, next) {
|
|
|
|
if (IEEE80211_ADDR_EQ(rt->rt_dest, dest)) {
|
2009-07-20 19:12:08 +00:00
|
|
|
mesh_rt_del(ms, rt);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
ieee80211_mesh_rt_flush(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt, *next;
|
|
|
|
|
|
|
|
if (ms == NULL)
|
|
|
|
return;
|
|
|
|
MESH_RT_LOCK(ms);
|
2009-07-20 19:12:08 +00:00
|
|
|
TAILQ_FOREACH_SAFE(rt, &ms->ms_routes, rt_next, next)
|
|
|
|
mesh_rt_del(ms, rt);
|
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
}
|
|
|
|
|
2009-07-27 14:22:09 +00:00
|
|
|
void
|
|
|
|
ieee80211_mesh_rt_flush_peer(struct ieee80211vap *vap,
|
|
|
|
const uint8_t peer[IEEE80211_ADDR_LEN])
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt, *next;
|
|
|
|
|
|
|
|
MESH_RT_LOCK(ms);
|
|
|
|
TAILQ_FOREACH_SAFE(rt, &ms->ms_routes, rt_next, next) {
|
|
|
|
if (IEEE80211_ADDR_EQ(rt->rt_nexthop, peer))
|
|
|
|
mesh_rt_del(ms, rt);
|
|
|
|
}
|
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
}
|
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
/*
|
|
|
|
* Flush expired routing entries, i.e. those in invalid state for
|
|
|
|
* some time.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mesh_rt_flush_invalid(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211_mesh_route *rt, *next;
|
|
|
|
|
|
|
|
if (ms == NULL)
|
|
|
|
return;
|
|
|
|
MESH_RT_LOCK(ms);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
TAILQ_FOREACH_SAFE(rt, &ms->ms_routes, rt_next, next) {
|
2009-07-20 19:12:08 +00:00
|
|
|
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0 &&
|
2009-07-21 19:38:22 +00:00
|
|
|
ticks - rt->rt_crtime >= ms->ms_ppath->mpp_inact)
|
2009-07-20 19:12:08 +00:00
|
|
|
mesh_rt_del(ms, rt);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define N(a) (sizeof(a) / sizeof(a[0]))
|
|
|
|
int
|
|
|
|
ieee80211_mesh_register_proto_path(const struct ieee80211_mesh_proto_path *mpp)
|
|
|
|
{
|
|
|
|
int i, firstempty = -1;
|
|
|
|
|
|
|
|
for (i = 0; i < N(mesh_proto_paths); i++) {
|
2009-10-12 10:08:58 +00:00
|
|
|
if (strncmp(mpp->mpp_descr, mesh_proto_paths[i].mpp_descr,
|
|
|
|
IEEE80211_MESH_PROTO_DSZ) == 0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return EEXIST;
|
2009-10-12 10:08:58 +00:00
|
|
|
if (!mesh_proto_paths[i].mpp_active && firstempty == -1)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
firstempty = i;
|
|
|
|
}
|
|
|
|
if (firstempty < 0)
|
|
|
|
return ENOSPC;
|
|
|
|
memcpy(&mesh_proto_paths[firstempty], mpp, sizeof(*mpp));
|
2009-10-12 10:08:58 +00:00
|
|
|
mesh_proto_paths[firstempty].mpp_active = 1;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
ieee80211_mesh_register_proto_metric(const struct
|
|
|
|
ieee80211_mesh_proto_metric *mpm)
|
|
|
|
{
|
|
|
|
int i, firstempty = -1;
|
|
|
|
|
|
|
|
for (i = 0; i < N(mesh_proto_metrics); i++) {
|
2009-10-12 10:08:58 +00:00
|
|
|
if (strncmp(mpm->mpm_descr, mesh_proto_metrics[i].mpm_descr,
|
|
|
|
IEEE80211_MESH_PROTO_DSZ) == 0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return EEXIST;
|
2009-10-12 10:08:58 +00:00
|
|
|
if (!mesh_proto_metrics[i].mpm_active && firstempty == -1)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
firstempty = i;
|
|
|
|
}
|
|
|
|
if (firstempty < 0)
|
|
|
|
return ENOSPC;
|
|
|
|
memcpy(&mesh_proto_metrics[firstempty], mpm, sizeof(*mpm));
|
2009-10-12 10:08:58 +00:00
|
|
|
mesh_proto_metrics[firstempty].mpm_active = 1;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_select_proto_path(struct ieee80211vap *vap, const char *name)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < N(mesh_proto_paths); i++) {
|
|
|
|
if (strcasecmp(mesh_proto_paths[i].mpp_descr, name) == 0) {
|
|
|
|
ms->ms_ppath = &mesh_proto_paths[i];
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_select_proto_metric(struct ieee80211vap *vap, const char *name)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < N(mesh_proto_metrics); i++) {
|
|
|
|
if (strcasecmp(mesh_proto_metrics[i].mpm_descr, name) == 0) {
|
|
|
|
ms->ms_pmetric = &mesh_proto_metrics[i];
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ENOENT;
|
|
|
|
}
|
|
|
|
#undef N
|
|
|
|
|
|
|
|
static void
|
|
|
|
ieee80211_mesh_init(void)
|
|
|
|
{
|
|
|
|
|
|
|
|
memset(mesh_proto_paths, 0, sizeof(mesh_proto_paths));
|
|
|
|
memset(mesh_proto_metrics, 0, sizeof(mesh_proto_metrics));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Setup mesh parameters that depends on the clock frequency.
|
|
|
|
*/
|
|
|
|
ieee80211_mesh_retrytimeout = msecs_to_ticks(40);
|
|
|
|
ieee80211_mesh_holdingtimeout = msecs_to_ticks(40);
|
|
|
|
ieee80211_mesh_confirmtimeout = msecs_to_ticks(40);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Register action frame handlers.
|
|
|
|
*/
|
|
|
|
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_OPEN,
|
|
|
|
mesh_recv_action_meshpeering_open);
|
|
|
|
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM,
|
|
|
|
mesh_recv_action_meshpeering_confirm);
|
|
|
|
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
mesh_recv_action_meshpeering_close);
|
|
|
|
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESHLMETRIC,
|
|
|
|
IEEE80211_ACTION_MESHLMETRIC_REQ, mesh_recv_action_meshlmetric_req);
|
|
|
|
ieee80211_recv_action_register(IEEE80211_ACTION_CAT_MESHLMETRIC,
|
|
|
|
IEEE80211_ACTION_MESHLMETRIC_REP, mesh_recv_action_meshlmetric_rep);
|
|
|
|
|
|
|
|
ieee80211_send_action_register(IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_OPEN,
|
|
|
|
mesh_send_action_meshpeering_open);
|
|
|
|
ieee80211_send_action_register(IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM,
|
|
|
|
mesh_send_action_meshpeering_confirm);
|
|
|
|
ieee80211_send_action_register(IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
mesh_send_action_meshpeering_close);
|
|
|
|
ieee80211_send_action_register(IEEE80211_ACTION_CAT_MESHLMETRIC,
|
|
|
|
IEEE80211_ACTION_MESHLMETRIC_REQ,
|
|
|
|
mesh_send_action_meshlink_request);
|
|
|
|
ieee80211_send_action_register(IEEE80211_ACTION_CAT_MESHLMETRIC,
|
|
|
|
IEEE80211_ACTION_MESHLMETRIC_REP,
|
|
|
|
mesh_send_action_meshlink_reply);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Register Airtime Link Metric.
|
|
|
|
*/
|
|
|
|
ieee80211_mesh_register_proto_metric(&mesh_metric_airtime);
|
|
|
|
|
|
|
|
}
|
|
|
|
SYSINIT(wlan_mesh, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_mesh_init, NULL);
|
|
|
|
|
|
|
|
void
|
|
|
|
ieee80211_mesh_attach(struct ieee80211com *ic)
|
|
|
|
{
|
|
|
|
ic->ic_vattach[IEEE80211_M_MBSS] = mesh_vattach;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
ieee80211_mesh_detach(struct ieee80211com *ic)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mesh_vdetach_peers(void *arg, struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
uint16_t args[3];
|
|
|
|
|
|
|
|
if (ni->ni_mlstate == IEEE80211_NODE_MESH_ESTABLISHED) {
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
}
|
2009-07-20 19:12:08 +00:00
|
|
|
callout_drain(&ni->ni_mltimer);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/* XXX belongs in hwmp */
|
|
|
|
ieee80211_ageq_drain_node(&ic->ic_stageq,
|
|
|
|
(void *)(uintptr_t) ieee80211_mac_hash(ic, ni->ni_macaddr));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mesh_vdetach(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
callout_drain(&ms->ms_cleantimer);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ieee80211_iterate_nodes(&vap->iv_ic->ic_sta, mesh_vdetach_peers,
|
|
|
|
NULL);
|
|
|
|
ieee80211_mesh_rt_flush(vap);
|
|
|
|
mtx_destroy(&ms->ms_rt_lock);
|
|
|
|
ms->ms_ppath->mpp_vdetach(vap);
|
|
|
|
free(vap->iv_mesh, M_80211_VAP);
|
|
|
|
vap->iv_mesh = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mesh_vattach(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms;
|
|
|
|
vap->iv_newstate = mesh_newstate;
|
|
|
|
vap->iv_input = mesh_input;
|
|
|
|
vap->iv_opdetach = mesh_vdetach;
|
|
|
|
vap->iv_recv_mgmt = mesh_recv_mgmt;
|
2010-03-18 11:06:38 +00:00
|
|
|
vap->iv_recv_ctl = mesh_recv_ctl;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ms = malloc(sizeof(struct ieee80211_mesh_state), M_80211_VAP,
|
|
|
|
M_NOWAIT | M_ZERO);
|
|
|
|
if (ms == NULL) {
|
|
|
|
printf("%s: couldn't alloc MBSS state\n", __func__);
|
2009-07-20 19:12:08 +00:00
|
|
|
return;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
vap->iv_mesh = ms;
|
|
|
|
ms->ms_seq = 0;
|
|
|
|
ms->ms_flags = (IEEE80211_MESHFLAGS_AP | IEEE80211_MESHFLAGS_FWD);
|
|
|
|
ms->ms_ttl = IEEE80211_MESH_DEFAULT_TTL;
|
|
|
|
TAILQ_INIT(&ms->ms_routes);
|
|
|
|
mtx_init(&ms->ms_rt_lock, "MBSS", "802.11s routing table", MTX_DEF);
|
2009-07-20 19:12:08 +00:00
|
|
|
callout_init(&ms->ms_cleantimer, CALLOUT_MPSAFE);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
mesh_select_proto_metric(vap, "AIRTIME");
|
|
|
|
KASSERT(ms->ms_pmetric, ("ms_pmetric == NULL"));
|
|
|
|
mesh_select_proto_path(vap, "HWMP");
|
|
|
|
KASSERT(ms->ms_ppath, ("ms_ppath == NULL"));
|
|
|
|
ms->ms_ppath->mpp_vattach(vap);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* IEEE80211_M_MBSS vap state machine handler.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
mesh_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
struct ieee80211_node *ni;
|
|
|
|
enum ieee80211_state ostate;
|
|
|
|
|
|
|
|
IEEE80211_LOCK_ASSERT(ic);
|
|
|
|
|
|
|
|
ostate = vap->iv_state;
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
|
|
|
|
__func__, ieee80211_state_name[ostate],
|
|
|
|
ieee80211_state_name[nstate], arg);
|
|
|
|
vap->iv_state = nstate; /* state transition */
|
|
|
|
if (ostate != IEEE80211_S_SCAN)
|
|
|
|
ieee80211_cancel_scan(vap); /* background scan */
|
|
|
|
ni = vap->iv_bss; /* NB: no reference held */
|
2009-07-20 19:12:08 +00:00
|
|
|
if (nstate != IEEE80211_S_RUN && ostate == IEEE80211_S_RUN)
|
|
|
|
callout_drain(&ms->ms_cleantimer);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
switch (nstate) {
|
|
|
|
case IEEE80211_S_INIT:
|
|
|
|
switch (ostate) {
|
|
|
|
case IEEE80211_S_SCAN:
|
|
|
|
ieee80211_cancel_scan(vap);
|
|
|
|
break;
|
|
|
|
case IEEE80211_S_CAC:
|
|
|
|
ieee80211_dfs_cac_stop(vap);
|
|
|
|
break;
|
|
|
|
case IEEE80211_S_RUN:
|
|
|
|
ieee80211_iterate_nodes(&ic->ic_sta,
|
|
|
|
mesh_vdetach_peers, NULL);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (ostate != IEEE80211_S_INIT) {
|
|
|
|
/* NB: optimize INIT -> INIT case */
|
|
|
|
ieee80211_reset_bss(vap);
|
2009-07-20 19:12:08 +00:00
|
|
|
ieee80211_mesh_rt_flush(vap);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case IEEE80211_S_SCAN:
|
|
|
|
switch (ostate) {
|
|
|
|
case IEEE80211_S_INIT:
|
|
|
|
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC &&
|
|
|
|
!IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan) &&
|
|
|
|
ms->ms_idlen != 0) {
|
|
|
|
/*
|
|
|
|
* Already have a channel and a mesh ID; bypass
|
|
|
|
* the scan and startup immediately.
|
|
|
|
*/
|
|
|
|
ieee80211_create_ibss(vap, vap->iv_des_chan);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Initiate a scan. We can come here as a result
|
|
|
|
* of an IEEE80211_IOC_SCAN_REQ too in which case
|
|
|
|
* the vap will be marked with IEEE80211_FEXT_SCANREQ
|
|
|
|
* and the scan request parameters will be present
|
|
|
|
* in iv_scanreq. Otherwise we do the default.
|
|
|
|
*/
|
|
|
|
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
|
|
|
|
ieee80211_check_scan(vap,
|
|
|
|
vap->iv_scanreq_flags,
|
|
|
|
vap->iv_scanreq_duration,
|
|
|
|
vap->iv_scanreq_mindwell,
|
|
|
|
vap->iv_scanreq_maxdwell,
|
|
|
|
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
|
|
|
|
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
|
|
|
|
} else
|
|
|
|
ieee80211_check_scan_current(vap);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case IEEE80211_S_CAC:
|
|
|
|
/*
|
|
|
|
* Start CAC on a DFS channel. We come here when starting
|
|
|
|
* a bss on a DFS channel (see ieee80211_create_ibss).
|
|
|
|
*/
|
|
|
|
ieee80211_dfs_cac_start(vap);
|
|
|
|
break;
|
|
|
|
case IEEE80211_S_RUN:
|
|
|
|
switch (ostate) {
|
|
|
|
case IEEE80211_S_INIT:
|
|
|
|
/*
|
|
|
|
* Already have a channel; bypass the
|
|
|
|
* scan and startup immediately.
|
|
|
|
* Note that ieee80211_create_ibss will call
|
|
|
|
* back to do a RUN->RUN state change.
|
|
|
|
*/
|
|
|
|
ieee80211_create_ibss(vap,
|
|
|
|
ieee80211_ht_adjust_channel(ic,
|
|
|
|
ic->ic_curchan, vap->iv_flags_ht));
|
|
|
|
/* NB: iv_bss is changed on return */
|
|
|
|
break;
|
|
|
|
case IEEE80211_S_CAC:
|
|
|
|
/*
|
|
|
|
* NB: This is the normal state change when CAC
|
|
|
|
* expires and no radar was detected; no need to
|
|
|
|
* clear the CAC timer as it's already expired.
|
|
|
|
*/
|
|
|
|
/* fall thru... */
|
|
|
|
case IEEE80211_S_CSA:
|
|
|
|
#if 0
|
|
|
|
/*
|
|
|
|
* Shorten inactivity timer of associated stations
|
|
|
|
* to weed out sta's that don't follow a CSA.
|
|
|
|
*/
|
|
|
|
ieee80211_iterate_nodes(&ic->ic_sta, sta_csa, vap);
|
|
|
|
#endif
|
|
|
|
/*
|
|
|
|
* Update bss node channel to reflect where
|
|
|
|
* we landed after CSA.
|
|
|
|
*/
|
|
|
|
ieee80211_node_set_chan(vap->iv_bss,
|
|
|
|
ieee80211_ht_adjust_channel(ic, ic->ic_curchan,
|
|
|
|
ieee80211_htchanflags(vap->iv_bss->ni_chan)));
|
|
|
|
/* XXX bypass debug msgs */
|
|
|
|
break;
|
|
|
|
case IEEE80211_S_SCAN:
|
|
|
|
case IEEE80211_S_RUN:
|
|
|
|
#ifdef IEEE80211_DEBUG
|
|
|
|
if (ieee80211_msg_debug(vap)) {
|
|
|
|
struct ieee80211_node *ni = vap->iv_bss;
|
|
|
|
ieee80211_note(vap,
|
|
|
|
"synchronized with %s meshid ",
|
|
|
|
ether_sprintf(ni->ni_meshid));
|
|
|
|
ieee80211_print_essid(ni->ni_meshid,
|
|
|
|
ni->ni_meshidlen);
|
|
|
|
/* XXX MCS/HT */
|
|
|
|
printf(" channel %d\n",
|
|
|
|
ieee80211_chan2ieee(ic, ic->ic_curchan));
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
ieee80211_node_authorize(vap->iv_bss);
|
2009-07-21 19:38:22 +00:00
|
|
|
callout_reset(&ms->ms_cleantimer, ms->ms_ppath->mpp_inact,
|
2009-07-20 19:12:08 +00:00
|
|
|
mesh_rt_cleanup_cb, vap);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/* NB: ostate not nstate */
|
|
|
|
ms->ms_ppath->mpp_newstate(vap, ostate, arg);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
static void
|
|
|
|
mesh_rt_cleanup_cb(void *arg)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = arg;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
|
|
|
|
mesh_rt_flush_invalid(vap);
|
2009-07-21 19:38:22 +00:00
|
|
|
callout_reset(&ms->ms_cleantimer, ms->ms_ppath->mpp_inact,
|
2009-07-20 19:12:08 +00:00
|
|
|
mesh_rt_cleanup_cb, vap);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Helper function to note the Mesh Peer Link FSM change.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mesh_linkchange(struct ieee80211_node *ni, enum ieee80211_mesh_mlstate state)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
#ifdef IEEE80211_DEBUG
|
|
|
|
static const char *meshlinkstates[] = {
|
|
|
|
[IEEE80211_NODE_MESH_IDLE] = "IDLE",
|
|
|
|
[IEEE80211_NODE_MESH_OPENSNT] = "OPEN SENT",
|
|
|
|
[IEEE80211_NODE_MESH_OPENRCV] = "OPEN RECEIVED",
|
|
|
|
[IEEE80211_NODE_MESH_CONFIRMRCV] = "CONFIRM RECEIVED",
|
|
|
|
[IEEE80211_NODE_MESH_ESTABLISHED] = "ESTABLISHED",
|
|
|
|
[IEEE80211_NODE_MESH_HOLDING] = "HOLDING"
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_MESH,
|
|
|
|
ni, "peer link: %s -> %s",
|
|
|
|
meshlinkstates[ni->ni_mlstate], meshlinkstates[state]);
|
|
|
|
|
|
|
|
/* track neighbor count */
|
|
|
|
if (state == IEEE80211_NODE_MESH_ESTABLISHED &&
|
|
|
|
ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED) {
|
|
|
|
KASSERT(ms->ms_neighbors < 65535, ("neighbor count overflow"));
|
|
|
|
ms->ms_neighbors++;
|
2009-10-19 18:46:22 +00:00
|
|
|
ieee80211_beacon_notify(vap, IEEE80211_BEACON_MESHCONF);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
} else if (ni->ni_mlstate == IEEE80211_NODE_MESH_ESTABLISHED &&
|
|
|
|
state != IEEE80211_NODE_MESH_ESTABLISHED) {
|
|
|
|
KASSERT(ms->ms_neighbors > 0, ("neighbor count 0"));
|
|
|
|
ms->ms_neighbors--;
|
2009-10-19 18:46:22 +00:00
|
|
|
ieee80211_beacon_notify(vap, IEEE80211_BEACON_MESHCONF);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
ni->ni_mlstate = state;
|
2009-07-20 19:12:08 +00:00
|
|
|
switch (state) {
|
|
|
|
case IEEE80211_NODE_MESH_HOLDING:
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ms->ms_ppath->mpp_peerdown(ni);
|
2009-07-20 19:12:08 +00:00
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_ESTABLISHED:
|
|
|
|
ieee80211_mesh_discover(vap, ni->ni_macaddr, NULL);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Helper function to generate a unique local ID required for mesh
|
|
|
|
* peer establishment.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mesh_checkid(void *arg, struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
uint16_t *r = arg;
|
|
|
|
|
|
|
|
if (*r == ni->ni_mllid)
|
|
|
|
*(uint16_t *)arg = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint32_t
|
|
|
|
mesh_generateid(struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
int maxiter = 4;
|
|
|
|
uint16_t r;
|
|
|
|
|
|
|
|
do {
|
|
|
|
get_random_bytes(&r, 2);
|
|
|
|
ieee80211_iterate_nodes(&vap->iv_ic->ic_sta, mesh_checkid, &r);
|
|
|
|
maxiter--;
|
|
|
|
} while (r == 0 && maxiter > 0);
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Verifies if we already received this packet by checking its
|
|
|
|
* sequence number.
|
2009-07-27 14:22:09 +00:00
|
|
|
* Returns 0 if the frame is to be accepted, 1 otherwise.
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
*/
|
|
|
|
static int
|
|
|
|
mesh_checkpseq(struct ieee80211vap *vap,
|
|
|
|
const uint8_t source[IEEE80211_ADDR_LEN], uint32_t seq)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, source);
|
|
|
|
if (rt == NULL) {
|
2009-07-27 14:22:09 +00:00
|
|
|
rt = ieee80211_mesh_rt_add(vap, source);
|
|
|
|
if (rt == NULL) {
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, source,
|
|
|
|
"%s", "add mcast route failed");
|
|
|
|
vap->iv_stats.is_mesh_rtaddfailed++;
|
|
|
|
return 1;
|
|
|
|
}
|
2009-07-20 19:12:08 +00:00
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, source,
|
|
|
|
"add mcast route, mesh seqno %d", seq);
|
2009-07-27 14:22:09 +00:00
|
|
|
rt->rt_lastmseq = seq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
if (IEEE80211_MESH_SEQ_GEQ(rt->rt_lastmseq, seq)) {
|
|
|
|
return 1;
|
|
|
|
} else {
|
|
|
|
rt->rt_lastmseq = seq;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Iterate the routing table and locate the next hop.
|
|
|
|
*/
|
|
|
|
static struct ieee80211_node *
|
|
|
|
mesh_find_txnode(struct ieee80211vap *vap,
|
|
|
|
const uint8_t dest[IEEE80211_ADDR_LEN])
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
|
|
|
|
rt = ieee80211_mesh_rt_find(vap, dest);
|
|
|
|
if (rt == NULL)
|
|
|
|
return NULL;
|
2009-07-20 19:12:08 +00:00
|
|
|
if ((rt->rt_flags & IEEE80211_MESHRT_FLAGS_VALID) == 0 ||
|
|
|
|
(rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY)) {
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, dest,
|
|
|
|
"%s: !valid or proxy, flags 0x%x", __func__, rt->rt_flags);
|
|
|
|
/* XXX stat */
|
|
|
|
return NULL;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return ieee80211_find_txnode(vap, rt->rt_nexthop);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Forward the specified frame.
|
|
|
|
* Decrement the TTL and set TA to our MAC address.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mesh_forward(struct ieee80211vap *vap, struct mbuf *m,
|
|
|
|
const struct ieee80211_meshcntl *mc)
|
|
|
|
{
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ifnet *ifp = vap->iv_ifp;
|
|
|
|
struct ifnet *parent = ic->ic_ifp;
|
|
|
|
const struct ieee80211_frame *wh =
|
|
|
|
mtod(m, const struct ieee80211_frame *);
|
|
|
|
struct mbuf *mcopy;
|
|
|
|
struct ieee80211_meshcntl *mccopy;
|
|
|
|
struct ieee80211_frame *whcopy;
|
|
|
|
struct ieee80211_node *ni;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (mc->mc_ttl == 0) {
|
|
|
|
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
|
|
|
|
"%s", "frame not fwd'd, ttl 0");
|
|
|
|
vap->iv_stats.is_mesh_fwd_ttl++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
if (!(ms->ms_flags & IEEE80211_MESHFLAGS_FWD)) {
|
|
|
|
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
|
|
|
|
"%s", "frame not fwd'd, fwding disabled");
|
|
|
|
vap->iv_stats.is_mesh_fwd_disabled++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
mcopy = m_dup(m, M_DONTWAIT);
|
|
|
|
if (mcopy == NULL) {
|
|
|
|
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
|
|
|
|
"%s", "frame not fwd'd, cannot dup");
|
|
|
|
vap->iv_stats.is_mesh_fwd_nobuf++;
|
|
|
|
ifp->if_oerrors++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
mcopy = m_pullup(mcopy, ieee80211_hdrspace(ic, wh) +
|
|
|
|
sizeof(struct ieee80211_meshcntl));
|
|
|
|
if (mcopy == NULL) {
|
|
|
|
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
|
|
|
|
"%s", "frame not fwd'd, too short");
|
|
|
|
vap->iv_stats.is_mesh_fwd_tooshort++;
|
|
|
|
ifp->if_oerrors++;
|
|
|
|
m_freem(mcopy);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
whcopy = mtod(mcopy, struct ieee80211_frame *);
|
|
|
|
mccopy = (struct ieee80211_meshcntl *)
|
|
|
|
(mtod(mcopy, uint8_t *) + ieee80211_hdrspace(ic, wh));
|
|
|
|
/* XXX clear other bits? */
|
|
|
|
whcopy->i_fc[1] &= ~IEEE80211_FC1_RETRY;
|
|
|
|
IEEE80211_ADDR_COPY(whcopy->i_addr2, vap->iv_myaddr);
|
|
|
|
if (IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
|
|
mcopy->m_flags |= M_MCAST;
|
|
|
|
} else {
|
|
|
|
ni = mesh_find_txnode(vap, whcopy->i_addr3);
|
|
|
|
if (ni == NULL) {
|
|
|
|
IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_MESH, wh,
|
|
|
|
"%s", "frame not fwd'd, no path");
|
|
|
|
vap->iv_stats.is_mesh_fwd_nopath++;
|
|
|
|
m_freem(mcopy);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
IEEE80211_ADDR_COPY(whcopy->i_addr1, ni->ni_macaddr);
|
|
|
|
}
|
|
|
|
KASSERT(mccopy->mc_ttl > 0, ("%s called with wrong ttl", __func__));
|
|
|
|
mccopy->mc_ttl--;
|
|
|
|
|
|
|
|
/* XXX calculate priority so drivers can find the tx queue */
|
|
|
|
M_WME_SETAC(mcopy, WME_AC_BE);
|
|
|
|
|
|
|
|
/* XXX do we know m_nextpkt is NULL? */
|
|
|
|
mcopy->m_pkthdr.rcvif = (void *) ni;
|
|
|
|
err = parent->if_transmit(parent, mcopy);
|
|
|
|
if (err != 0) {
|
|
|
|
/* NB: IFQ_HANDOFF reclaims mbuf */
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
} else {
|
|
|
|
ifp->if_opackets++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-07-20 19:12:08 +00:00
|
|
|
static struct mbuf *
|
|
|
|
mesh_decap(struct ieee80211vap *vap, struct mbuf *m, int hdrlen, int meshdrlen)
|
|
|
|
{
|
|
|
|
#define WHDIR(wh) ((wh)->i_fc[1] & IEEE80211_FC1_DIR_MASK)
|
|
|
|
uint8_t b[sizeof(struct ieee80211_qosframe_addr4) +
|
|
|
|
sizeof(struct ieee80211_meshcntl_ae11)];
|
|
|
|
const struct ieee80211_qosframe_addr4 *wh;
|
|
|
|
const struct ieee80211_meshcntl_ae10 *mc;
|
|
|
|
struct ether_header *eh;
|
|
|
|
struct llc *llc;
|
|
|
|
int ae;
|
|
|
|
|
|
|
|
if (m->m_len < hdrlen + sizeof(*llc) &&
|
|
|
|
(m = m_pullup(m, hdrlen + sizeof(*llc))) == NULL) {
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ANY,
|
|
|
|
"discard data frame: %s", "m_pullup failed");
|
|
|
|
vap->iv_stats.is_rx_tooshort++;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
memcpy(b, mtod(m, caddr_t), hdrlen);
|
|
|
|
wh = (const struct ieee80211_qosframe_addr4 *)&b[0];
|
|
|
|
mc = (const struct ieee80211_meshcntl_ae10 *)&b[hdrlen - meshdrlen];
|
|
|
|
KASSERT(WHDIR(wh) == IEEE80211_FC1_DIR_FROMDS ||
|
|
|
|
WHDIR(wh) == IEEE80211_FC1_DIR_DSTODS,
|
|
|
|
("bogus dir, fc 0x%x:0x%x", wh->i_fc[0], wh->i_fc[1]));
|
|
|
|
|
|
|
|
llc = (struct llc *)(mtod(m, caddr_t) + hdrlen);
|
|
|
|
if (llc->llc_dsap == LLC_SNAP_LSAP && llc->llc_ssap == LLC_SNAP_LSAP &&
|
|
|
|
llc->llc_control == LLC_UI && llc->llc_snap.org_code[0] == 0 &&
|
|
|
|
llc->llc_snap.org_code[1] == 0 && llc->llc_snap.org_code[2] == 0 &&
|
|
|
|
/* NB: preserve AppleTalk frames that have a native SNAP hdr */
|
|
|
|
!(llc->llc_snap.ether_type == htons(ETHERTYPE_AARP) ||
|
|
|
|
llc->llc_snap.ether_type == htons(ETHERTYPE_IPX))) {
|
|
|
|
m_adj(m, hdrlen + sizeof(struct llc) - sizeof(*eh));
|
|
|
|
llc = NULL;
|
|
|
|
} else {
|
|
|
|
m_adj(m, hdrlen - sizeof(*eh));
|
|
|
|
}
|
|
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
ae = mc->mc_flags & 3;
|
|
|
|
if (WHDIR(wh) == IEEE80211_FC1_DIR_FROMDS) {
|
|
|
|
IEEE80211_ADDR_COPY(eh->ether_dhost, wh->i_addr1);
|
|
|
|
if (ae == 0) {
|
|
|
|
IEEE80211_ADDR_COPY(eh->ether_shost, wh->i_addr3);
|
|
|
|
} else if (ae == 1) {
|
|
|
|
IEEE80211_ADDR_COPY(eh->ether_shost, mc->mc_addr4);
|
|
|
|
} else {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
|
|
|
|
(const struct ieee80211_frame *)wh, NULL,
|
|
|
|
"bad AE %d", ae);
|
|
|
|
vap->iv_stats.is_mesh_badae++;
|
|
|
|
m_freem(m);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (ae == 0) {
|
|
|
|
IEEE80211_ADDR_COPY(eh->ether_dhost, wh->i_addr3);
|
|
|
|
IEEE80211_ADDR_COPY(eh->ether_shost, wh->i_addr4);
|
|
|
|
} else if (ae == 2) {
|
|
|
|
IEEE80211_ADDR_COPY(eh->ether_dhost, mc->mc_addr4);
|
|
|
|
IEEE80211_ADDR_COPY(eh->ether_shost, mc->mc_addr5);
|
|
|
|
} else {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
|
|
|
|
(const struct ieee80211_frame *)wh, NULL,
|
|
|
|
"bad AE %d", ae);
|
|
|
|
vap->iv_stats.is_mesh_badae++;
|
|
|
|
m_freem(m);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#ifdef ALIGNED_POINTER
|
|
|
|
if (!ALIGNED_POINTER(mtod(m, caddr_t) + sizeof(*eh), uint32_t)) {
|
|
|
|
m = ieee80211_realign(vap, m, sizeof(*eh));
|
|
|
|
if (m == NULL)
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
#endif /* ALIGNED_POINTER */
|
|
|
|
if (llc != NULL) {
|
|
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
eh->ether_type = htons(m->m_pkthdr.len - sizeof(*eh));
|
|
|
|
}
|
|
|
|
return m;
|
|
|
|
#undef WDIR
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Return non-zero if the unicast mesh data frame should be processed
|
|
|
|
* locally. Frames that are not proxy'd have our address, otherwise
|
|
|
|
* we need to consult the routing table to look for a proxy entry.
|
|
|
|
*/
|
|
|
|
static __inline int
|
|
|
|
mesh_isucastforme(struct ieee80211vap *vap, const struct ieee80211_frame *wh,
|
|
|
|
const struct ieee80211_meshcntl *mc)
|
|
|
|
{
|
|
|
|
int ae = mc->mc_flags & 3;
|
|
|
|
|
|
|
|
KASSERT((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS,
|
|
|
|
("bad dir 0x%x:0x%x", wh->i_fc[0], wh->i_fc[1]));
|
|
|
|
KASSERT(ae == 0 || ae == 2, ("bad AE %d", ae));
|
|
|
|
if (ae == 2) { /* ucast w/ proxy */
|
|
|
|
const struct ieee80211_meshcntl_ae10 *mc10 =
|
|
|
|
(const struct ieee80211_meshcntl_ae10 *) mc;
|
|
|
|
struct ieee80211_mesh_route *rt =
|
|
|
|
ieee80211_mesh_rt_find(vap, mc10->mc_addr4);
|
|
|
|
/* check for proxy route to ourself */
|
|
|
|
return (rt != NULL &&
|
|
|
|
(rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY));
|
|
|
|
} else /* ucast w/o proxy */
|
|
|
|
return IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_myaddr);
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static int
|
|
|
|
mesh_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf)
|
|
|
|
{
|
|
|
|
#define HAS_SEQ(type) ((type & 0x4) == 0)
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
struct ifnet *ifp = vap->iv_ifp;
|
|
|
|
struct ieee80211_frame *wh;
|
|
|
|
const struct ieee80211_meshcntl *mc;
|
2009-07-20 19:12:08 +00:00
|
|
|
int hdrspace, meshdrlen, need_tap;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
uint8_t dir, type, subtype, qos;
|
|
|
|
uint32_t seq;
|
|
|
|
uint8_t *addr;
|
|
|
|
ieee80211_seq rxseq;
|
|
|
|
|
|
|
|
KASSERT(ni != NULL, ("null node"));
|
|
|
|
ni->ni_inact = ni->ni_inact_reload;
|
|
|
|
|
|
|
|
need_tap = 1; /* mbuf need to be tapped. */
|
|
|
|
type = -1; /* undefined */
|
|
|
|
|
|
|
|
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
|
|
ni->ni_macaddr, NULL,
|
|
|
|
"too short (1): len %u", m->m_pkthdr.len);
|
|
|
|
vap->iv_stats.is_rx_tooshort++;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Bit of a cheat here, we use a pointer for a 3-address
|
|
|
|
* frame format but don't reference fields past outside
|
|
|
|
* ieee80211_frame_min w/o first validating the data is
|
|
|
|
* present.
|
|
|
|
*/
|
|
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
|
|
|
|
|
|
if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) !=
|
|
|
|
IEEE80211_FC0_VERSION_0) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
|
|
ni->ni_macaddr, NULL, "wrong version %x", wh->i_fc[0]);
|
|
|
|
vap->iv_stats.is_rx_badversion++;
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
|
|
|
|
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
|
|
|
|
subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
|
|
|
|
if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) {
|
|
|
|
IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi);
|
|
|
|
ni->ni_noise = nf;
|
|
|
|
if (HAS_SEQ(type)) {
|
|
|
|
uint8_t tid = ieee80211_gettid(wh);
|
|
|
|
|
|
|
|
if (IEEE80211_QOS_HAS_SEQ(wh) &&
|
|
|
|
TID_TO_WME_AC(tid) >= WME_AC_VI)
|
|
|
|
ic->ic_wme.wme_hipri_traffic++;
|
|
|
|
rxseq = le16toh(*(uint16_t *)wh->i_seq);
|
2011-05-04 02:23:59 +00:00
|
|
|
if (! ieee80211_check_rxseq(ni, wh)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/* duplicate, discard */
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh->i_addr1, "duplicate",
|
|
|
|
"seqno <%u,%u> fragno <%u,%u> tid %u",
|
|
|
|
rxseq >> IEEE80211_SEQ_SEQ_SHIFT,
|
|
|
|
ni->ni_rxseqs[tid] >>
|
|
|
|
IEEE80211_SEQ_SEQ_SHIFT,
|
|
|
|
rxseq & IEEE80211_SEQ_FRAG_MASK,
|
|
|
|
ni->ni_rxseqs[tid] &
|
|
|
|
IEEE80211_SEQ_FRAG_MASK,
|
|
|
|
tid);
|
|
|
|
vap->iv_stats.is_rx_dup++;
|
|
|
|
IEEE80211_NODE_STAT(ni, rx_dup);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
ni->ni_rxseqs[tid] = rxseq;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#ifdef IEEE80211_DEBUG
|
|
|
|
/*
|
|
|
|
* It's easier, but too expensive, to simulate different mesh
|
|
|
|
* topologies by consulting the ACL policy very early, so do this
|
|
|
|
* only under DEBUG.
|
|
|
|
*
|
|
|
|
* NB: this check is also done upon peering link initiation.
|
|
|
|
*/
|
|
|
|
if (vap->iv_acl != NULL && !vap->iv_acl->iac_check(vap, wh->i_addr2)) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ACL,
|
|
|
|
wh, NULL, "%s", "disallowed by ACL");
|
|
|
|
vap->iv_stats.is_rx_acl++;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
switch (type) {
|
|
|
|
case IEEE80211_FC0_TYPE_DATA:
|
|
|
|
if (ni == vap->iv_bss)
|
|
|
|
goto out;
|
|
|
|
if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_MESH,
|
|
|
|
ni->ni_macaddr, NULL,
|
|
|
|
"peer link not yet established (%d)",
|
|
|
|
ni->ni_mlstate);
|
|
|
|
vap->iv_stats.is_mesh_nolink++;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
if (dir != IEEE80211_FC1_DIR_FROMDS &&
|
|
|
|
dir != IEEE80211_FC1_DIR_DSTODS) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, "data", "incorrect dir 0x%x", dir);
|
|
|
|
vap->iv_stats.is_rx_wrongdir++;
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
/* pull up enough to get to the mesh control */
|
|
|
|
hdrspace = ieee80211_hdrspace(ic, wh);
|
|
|
|
if (m->m_len < hdrspace + sizeof(struct ieee80211_meshcntl) &&
|
|
|
|
(m = m_pullup(m, hdrspace +
|
|
|
|
sizeof(struct ieee80211_meshcntl))) == NULL) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
|
|
ni->ni_macaddr, NULL,
|
|
|
|
"data too short: expecting %u", hdrspace);
|
|
|
|
vap->iv_stats.is_rx_tooshort++;
|
|
|
|
goto out; /* XXX */
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Now calculate the full extent of the headers. Note
|
2009-07-20 19:12:08 +00:00
|
|
|
* mesh_decap will pull up anything we didn't get
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
* above when it strips the 802.11 headers.
|
|
|
|
*/
|
|
|
|
mc = (const struct ieee80211_meshcntl *)
|
|
|
|
(mtod(m, const uint8_t *) + hdrspace);
|
2009-07-20 19:12:08 +00:00
|
|
|
meshdrlen = sizeof(struct ieee80211_meshcntl) +
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
(mc->mc_flags & 3) * IEEE80211_ADDR_LEN;
|
2009-07-20 19:12:08 +00:00
|
|
|
hdrspace += meshdrlen;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
seq = LE_READ_4(mc->mc_seq);
|
|
|
|
if (IEEE80211_IS_MULTICAST(wh->i_addr1))
|
|
|
|
addr = wh->i_addr3;
|
|
|
|
else
|
|
|
|
addr = ((struct ieee80211_qosframe_addr4 *)wh)->i_addr4;
|
|
|
|
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, addr)) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
|
|
|
|
addr, "data", "%s", "not to me");
|
|
|
|
vap->iv_stats.is_rx_wrongbss++; /* XXX kinda */
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
if (mesh_checkpseq(vap, addr, seq) != 0) {
|
|
|
|
vap->iv_stats.is_rx_dup++;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Potentially forward packet. See table s36 (p140)
|
|
|
|
* for the rules. XXX tap fwd'd packets not for us?
|
|
|
|
*/
|
|
|
|
if (dir == IEEE80211_FC1_DIR_FROMDS ||
|
2009-07-20 19:12:08 +00:00
|
|
|
!mesh_isucastforme(vap, wh, mc)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
mesh_forward(vap, m, mc);
|
|
|
|
if (dir == IEEE80211_FC1_DIR_DSTODS)
|
|
|
|
goto out;
|
|
|
|
/* NB: fall thru to deliver mcast frames locally */
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Save QoS bits for use below--before we strip the header.
|
|
|
|
*/
|
|
|
|
if (subtype == IEEE80211_FC0_SUBTYPE_QOS) {
|
|
|
|
qos = (dir == IEEE80211_FC1_DIR_DSTODS) ?
|
|
|
|
((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0] :
|
|
|
|
((struct ieee80211_qosframe *)wh)->i_qos[0];
|
|
|
|
} else
|
|
|
|
qos = 0;
|
|
|
|
/*
|
|
|
|
* Next up, any fragmentation.
|
|
|
|
*/
|
|
|
|
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
|
|
m = ieee80211_defrag(ni, m, hdrspace);
|
|
|
|
if (m == NULL) {
|
|
|
|
/* Fragment dropped or frame not complete yet */
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
wh = NULL; /* no longer valid, catch any uses */
|
|
|
|
|
|
|
|
if (ieee80211_radiotap_active_vap(vap))
|
|
|
|
ieee80211_radiotap_rx(vap, m);
|
|
|
|
need_tap = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Finally, strip the 802.11 header.
|
|
|
|
*/
|
2009-07-20 19:12:08 +00:00
|
|
|
m = mesh_decap(vap, m, hdrspace, meshdrlen);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (m == NULL) {
|
|
|
|
/* XXX mask bit to check for both */
|
|
|
|
/* don't count Null data frames as errors */
|
|
|
|
if (subtype == IEEE80211_FC0_SUBTYPE_NODATA ||
|
|
|
|
subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL)
|
|
|
|
goto out;
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
|
|
|
|
ni->ni_macaddr, "data", "%s", "decap error");
|
|
|
|
vap->iv_stats.is_rx_decap++;
|
|
|
|
IEEE80211_NODE_STAT(ni, rx_decap);
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
if (qos & IEEE80211_QOS_AMSDU) {
|
|
|
|
m = ieee80211_decap_amsdu(ni, m);
|
|
|
|
if (m == NULL)
|
|
|
|
return IEEE80211_FC0_TYPE_DATA;
|
2009-07-20 19:12:08 +00:00
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ieee80211_deliver_data(vap, ni, m);
|
|
|
|
return type;
|
|
|
|
case IEEE80211_FC0_TYPE_MGT:
|
|
|
|
vap->iv_stats.is_rx_mgmt++;
|
|
|
|
IEEE80211_NODE_STAT(ni, rx_mgmt);
|
|
|
|
if (dir != IEEE80211_FC1_DIR_NODS) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, "mgt", "incorrect dir 0x%x", dir);
|
|
|
|
vap->iv_stats.is_rx_wrongdir++;
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) {
|
|
|
|
IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY,
|
|
|
|
ni->ni_macaddr, "mgt", "too short: len %u",
|
|
|
|
m->m_pkthdr.len);
|
|
|
|
vap->iv_stats.is_rx_tooshort++;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
#ifdef IEEE80211_DEBUG
|
|
|
|
if ((ieee80211_msg_debug(vap) &&
|
|
|
|
(vap->iv_ic->ic_flags & IEEE80211_F_SCAN)) ||
|
|
|
|
ieee80211_msg_dumppkts(vap)) {
|
|
|
|
if_printf(ifp, "received %s from %s rssi %d\n",
|
|
|
|
ieee80211_mgt_subtype_name[subtype >>
|
|
|
|
IEEE80211_FC0_SUBTYPE_SHIFT],
|
|
|
|
ether_sprintf(wh->i_addr2), rssi);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, NULL, "%s", "WEP set but not permitted");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++; /* XXX */
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
vap->iv_recv_mgmt(ni, m, subtype, rssi, nf);
|
|
|
|
goto out;
|
|
|
|
case IEEE80211_FC0_TYPE_CTL:
|
|
|
|
vap->iv_stats.is_rx_ctl++;
|
|
|
|
IEEE80211_NODE_STAT(ni, rx_ctrl);
|
|
|
|
goto out;
|
|
|
|
default:
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
|
|
|
|
wh, "bad", "frame type 0x%x", type);
|
|
|
|
/* should not come here */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
err:
|
|
|
|
ifp->if_ierrors++;
|
|
|
|
out:
|
|
|
|
if (m != NULL) {
|
|
|
|
if (need_tap && ieee80211_radiotap_active_vap(vap))
|
|
|
|
ieee80211_radiotap_rx(vap, m);
|
|
|
|
m_freem(m);
|
|
|
|
}
|
|
|
|
return type;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mesh_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0, int subtype,
|
|
|
|
int rssi, int nf)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
struct ieee80211_frame *wh;
|
|
|
|
uint8_t *frm, *efrm;
|
|
|
|
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
|
|
frm = (uint8_t *)&wh[1];
|
|
|
|
efrm = mtod(m0, uint8_t *) + m0->m_len;
|
|
|
|
switch (subtype) {
|
|
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
|
|
|
|
case IEEE80211_FC0_SUBTYPE_BEACON:
|
|
|
|
{
|
|
|
|
struct ieee80211_scanparams scan;
|
|
|
|
/*
|
|
|
|
* We process beacon/probe response
|
|
|
|
* frames to discover neighbors.
|
|
|
|
*/
|
|
|
|
if (ieee80211_parse_beacon(ni, m0, &scan) != 0)
|
|
|
|
return;
|
|
|
|
/*
|
|
|
|
* Count frame now that we know it's to be processed.
|
|
|
|
*/
|
|
|
|
if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) {
|
|
|
|
vap->iv_stats.is_rx_beacon++; /* XXX remove */
|
|
|
|
IEEE80211_NODE_STAT(ni, rx_beacons);
|
|
|
|
} else
|
|
|
|
IEEE80211_NODE_STAT(ni, rx_proberesp);
|
|
|
|
/*
|
|
|
|
* If scanning, just pass information to the scan module.
|
|
|
|
*/
|
|
|
|
if (ic->ic_flags & IEEE80211_F_SCAN) {
|
|
|
|
if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) {
|
|
|
|
/*
|
|
|
|
* Actively scanning a channel marked passive;
|
|
|
|
* send a probe request now that we know there
|
|
|
|
* is 802.11 traffic present.
|
|
|
|
*
|
|
|
|
* XXX check if the beacon we recv'd gives
|
|
|
|
* us what we need and suppress the probe req
|
|
|
|
*/
|
|
|
|
ieee80211_probe_curchan(vap, 1);
|
|
|
|
ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN;
|
|
|
|
}
|
|
|
|
ieee80211_add_scan(vap, &scan, wh,
|
|
|
|
subtype, rssi, nf);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* The rest of this code assumes we are running */
|
|
|
|
if (vap->iv_state != IEEE80211_S_RUN)
|
|
|
|
return;
|
|
|
|
/*
|
|
|
|
* Ignore non-mesh STAs.
|
|
|
|
*/
|
|
|
|
if ((scan.capinfo &
|
|
|
|
(IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) ||
|
|
|
|
scan.meshid == NULL || scan.meshconf == NULL) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, "beacon", "%s", "not a mesh sta");
|
|
|
|
vap->iv_stats.is_mesh_wrongmesh++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Ignore STAs for other mesh networks.
|
|
|
|
*/
|
|
|
|
if (memcmp(scan.meshid+2, ms->ms_id, ms->ms_idlen) != 0 ||
|
|
|
|
mesh_verify_meshconf(vap, scan.meshconf)) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, "beacon", "%s", "not for our mesh");
|
|
|
|
vap->iv_stats.is_mesh_wrongmesh++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Peer only based on the current ACL policy.
|
|
|
|
*/
|
|
|
|
if (vap->iv_acl != NULL &&
|
|
|
|
!vap->iv_acl->iac_check(vap, wh->i_addr2)) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ACL,
|
|
|
|
wh, NULL, "%s", "disallowed by ACL");
|
|
|
|
vap->iv_stats.is_rx_acl++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Do neighbor discovery.
|
|
|
|
*/
|
|
|
|
if (!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) {
|
|
|
|
/*
|
|
|
|
* Create a new entry in the neighbor table.
|
|
|
|
*/
|
|
|
|
ni = ieee80211_add_neighbor(vap, wh, &scan);
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Automatically peer with discovered nodes if possible.
|
|
|
|
* XXX backoff on repeated failure
|
|
|
|
*/
|
|
|
|
if (ni != vap->iv_bss &&
|
|
|
|
(ms->ms_flags & IEEE80211_MESHFLAGS_AP) &&
|
|
|
|
ni->ni_mlstate == IEEE80211_NODE_MESH_IDLE) {
|
|
|
|
uint16_t args[1];
|
|
|
|
|
|
|
|
ni->ni_mlpid = mesh_generateid(vap);
|
|
|
|
if (ni->ni_mlpid == 0)
|
|
|
|
return;
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_OPENSNT);
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_OPEN, args);
|
|
|
|
ni->ni_mlrcnt = 0;
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
|
|
|
|
{
|
|
|
|
uint8_t *ssid, *meshid, *rates, *xrates;
|
|
|
|
uint8_t *sfrm;
|
|
|
|
|
|
|
|
if (vap->iv_state != IEEE80211_S_RUN) {
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, NULL, "wrong state %s",
|
|
|
|
ieee80211_state_name[vap->iv_state]);
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
if (IEEE80211_IS_MULTICAST(wh->i_addr2)) {
|
|
|
|
/* frame must be directed */
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, NULL, "%s", "not unicast");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++; /* XXX stat */
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* prreq frame format
|
|
|
|
* [tlv] ssid
|
|
|
|
* [tlv] supported rates
|
|
|
|
* [tlv] extended supported rates
|
|
|
|
* [tlv] mesh id
|
|
|
|
*/
|
|
|
|
ssid = meshid = rates = xrates = NULL;
|
|
|
|
sfrm = frm;
|
|
|
|
while (efrm - frm > 1) {
|
|
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return);
|
|
|
|
switch (*frm) {
|
|
|
|
case IEEE80211_ELEMID_SSID:
|
|
|
|
ssid = frm;
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_RATES:
|
|
|
|
rates = frm;
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_XRATES:
|
|
|
|
xrates = frm;
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHID:
|
|
|
|
meshid = frm;
|
|
|
|
break;
|
|
|
|
}
|
2011-01-19 17:40:58 +00:00
|
|
|
frm += frm[1] + 2;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return);
|
|
|
|
IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return);
|
|
|
|
if (xrates != NULL)
|
|
|
|
IEEE80211_VERIFY_ELEMENT(xrates,
|
|
|
|
IEEE80211_RATE_MAXSIZE - rates[1], return);
|
2010-02-03 10:12:49 +00:00
|
|
|
if (meshid != NULL) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_VERIFY_ELEMENT(meshid,
|
|
|
|
IEEE80211_MESHID_LEN, return);
|
2010-02-03 10:12:49 +00:00
|
|
|
/* NB: meshid, not ssid */
|
|
|
|
IEEE80211_VERIFY_SSID(vap->iv_bss, meshid, return);
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
/* XXX find a better class or define it's own */
|
|
|
|
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr2,
|
|
|
|
"%s", "recv probe req");
|
|
|
|
/*
|
|
|
|
* Some legacy 11b clients cannot hack a complete
|
|
|
|
* probe response frame. When the request includes
|
|
|
|
* only a bare-bones rate set, communicate this to
|
|
|
|
* the transmit side.
|
|
|
|
*/
|
|
|
|
ieee80211_send_proberesp(vap, wh->i_addr2, 0);
|
|
|
|
break;
|
|
|
|
}
|
2011-02-21 19:59:43 +00:00
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
case IEEE80211_FC0_SUBTYPE_ACTION:
|
2011-02-21 19:59:43 +00:00
|
|
|
case IEEE80211_FC0_SUBTYPE_ACTION_NOACK:
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (ni == vap->iv_bss) {
|
2011-02-22 19:05:42 +00:00
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
wh, NULL, "%s", "unknown node");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2011-02-22 19:05:42 +00:00
|
|
|
} else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) &&
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
2011-02-22 19:05:42 +00:00
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, NULL, "%s", "not for us");
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2011-02-22 19:05:42 +00:00
|
|
|
} else if (vap->iv_state != IEEE80211_S_RUN) {
|
2011-02-21 19:59:43 +00:00
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, NULL, "wrong state %s",
|
|
|
|
ieee80211_state_name[vap->iv_state]);
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2011-02-22 19:05:42 +00:00
|
|
|
} else {
|
|
|
|
if (ieee80211_parse_action(ni, m0) == 0)
|
|
|
|
(void)ic->ic_recv_action(ni, wh, frm, efrm);
|
2011-02-21 19:59:43 +00:00
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
2011-02-21 19:59:43 +00:00
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
|
|
|
|
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
|
2011-02-21 19:59:43 +00:00
|
|
|
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
|
2011-02-21 19:59:43 +00:00
|
|
|
case IEEE80211_FC0_SUBTYPE_ATIM:
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
case IEEE80211_FC0_SUBTYPE_DISASSOC:
|
2011-02-21 19:59:43 +00:00
|
|
|
case IEEE80211_FC0_SUBTYPE_AUTH:
|
|
|
|
case IEEE80211_FC0_SUBTYPE_DEAUTH:
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT,
|
|
|
|
wh, NULL, "%s", "not handled");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
2011-02-21 19:59:43 +00:00
|
|
|
break;
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
default:
|
|
|
|
IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY,
|
|
|
|
wh, "mgt", "subtype 0x%x not handled", subtype);
|
|
|
|
vap->iv_stats.is_rx_badsubtype++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2010-03-18 11:06:38 +00:00
|
|
|
static void
|
|
|
|
mesh_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype)
|
|
|
|
{
|
|
|
|
|
|
|
|
switch (subtype) {
|
|
|
|
case IEEE80211_FC0_SUBTYPE_BAR:
|
|
|
|
ieee80211_recv_bar(ni, m);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/*
|
|
|
|
* Parse meshpeering action ie's for open+confirm frames; the
|
|
|
|
* important bits are returned in the supplied structure.
|
|
|
|
*/
|
|
|
|
static const struct ieee80211_meshpeer_ie *
|
|
|
|
mesh_parse_meshpeering_action(struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh, /* XXX for VERIFY_LENGTH */
|
|
|
|
const uint8_t *frm, const uint8_t *efrm,
|
2009-09-22 18:18:14 +00:00
|
|
|
struct ieee80211_meshpeer_ie *mp, uint8_t subtype)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
const struct ieee80211_meshpeer_ie *mpie;
|
2009-09-22 18:18:14 +00:00
|
|
|
const uint8_t *meshid, *meshconf, *meshpeer;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
meshid = meshconf = meshpeer = NULL;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
while (efrm - frm > 1) {
|
|
|
|
IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return NULL);
|
|
|
|
switch (*frm) {
|
|
|
|
case IEEE80211_ELEMID_MESHID:
|
|
|
|
meshid = frm;
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHCONF:
|
|
|
|
meshconf = frm;
|
|
|
|
break;
|
|
|
|
case IEEE80211_ELEMID_MESHPEER:
|
|
|
|
meshpeer = frm;
|
|
|
|
mpie = (const struct ieee80211_meshpeer_ie *) frm;
|
|
|
|
memset(mp, 0, sizeof(*mp));
|
|
|
|
mp->peer_llinkid = LE_READ_2(&mpie->peer_llinkid);
|
|
|
|
/* NB: peer link ID is optional on these frames */
|
2009-09-22 18:18:14 +00:00
|
|
|
if (subtype == IEEE80211_MESH_PEER_LINK_CLOSE &&
|
|
|
|
mpie->peer_len == 8) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
mp->peer_linkid = 0;
|
|
|
|
mp->peer_rcode = LE_READ_2(&mpie->peer_linkid);
|
|
|
|
} else {
|
|
|
|
mp->peer_linkid = LE_READ_2(&mpie->peer_linkid);
|
|
|
|
mp->peer_rcode = LE_READ_2(&mpie->peer_rcode);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
frm += frm[1] + 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Verify the contents of the frame. Action frames with
|
|
|
|
* close subtype don't have a Mesh Configuration IE.
|
|
|
|
* If if fails validation, close the peer link.
|
|
|
|
*/
|
2009-09-22 18:18:14 +00:00
|
|
|
KASSERT(meshpeer != NULL &&
|
|
|
|
subtype != IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
("parsing close action"));
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
if (mesh_verify_meshid(vap, meshid) ||
|
|
|
|
mesh_verify_meshpeer(vap, subtype, meshpeer) ||
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
mesh_verify_meshconf(vap, meshconf)) {
|
|
|
|
uint16_t args[3];
|
|
|
|
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
|
|
|
|
wh, NULL, "%s", "not for our mesh");
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
|
|
switch (ni->ni_mlstate) {
|
|
|
|
case IEEE80211_NODE_MESH_IDLE:
|
|
|
|
case IEEE80211_NODE_MESH_ESTABLISHED:
|
|
|
|
case IEEE80211_NODE_MESH_HOLDING:
|
|
|
|
/* ignore */
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_OPENSNT:
|
|
|
|
case IEEE80211_NODE_MESH_OPENRCV:
|
|
|
|
case IEEE80211_NODE_MESH_CONFIRMRCV:
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
return (const struct ieee80211_meshpeer_ie *) mp;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_recv_action_meshpeering_open(struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh,
|
|
|
|
const uint8_t *frm, const uint8_t *efrm)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211_meshpeer_ie ie;
|
|
|
|
const struct ieee80211_meshpeer_ie *meshpeer;
|
|
|
|
uint16_t args[3];
|
|
|
|
|
|
|
|
/* +2+2 for action + code + capabilites */
|
2009-09-22 18:18:14 +00:00
|
|
|
meshpeer = mesh_parse_meshpeering_action(ni, wh, frm+2+2, efrm, &ie,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_OPEN);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (meshpeer == NULL) {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* XXX move up */
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
|
|
|
|
"recv PEER OPEN, lid 0x%x", meshpeer->peer_llinkid);
|
|
|
|
|
|
|
|
switch (ni->ni_mlstate) {
|
|
|
|
case IEEE80211_NODE_MESH_IDLE:
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_OPENRCV);
|
|
|
|
ni->ni_mllid = meshpeer->peer_llinkid;
|
|
|
|
ni->ni_mlpid = mesh_generateid(vap);
|
|
|
|
if (ni->ni_mlpid == 0)
|
|
|
|
return 0; /* XXX */
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
/* Announce we're open too... */
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_OPEN, args);
|
|
|
|
/* ...and confirm the link. */
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM,
|
|
|
|
args);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_OPENRCV:
|
|
|
|
/* Wrong Link ID */
|
|
|
|
if (ni->ni_mllid != meshpeer->peer_llinkid) {
|
|
|
|
args[0] = ni->ni_mllid;
|
|
|
|
args[1] = ni->ni_mlpid;
|
|
|
|
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/* Duplicate open, confirm again. */
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM,
|
|
|
|
args);
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_OPENSNT:
|
|
|
|
ni->ni_mllid = meshpeer->peer_llinkid;
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_OPENRCV);
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM,
|
|
|
|
args);
|
|
|
|
/* NB: don't setup/clear any timeout */
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_CONFIRMRCV:
|
|
|
|
if (ni->ni_mlpid != meshpeer->peer_linkid ||
|
|
|
|
ni->ni_mllid != meshpeer->peer_llinkid) {
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
mesh_linkchange(ni,
|
|
|
|
IEEE80211_NODE_MESH_HOLDING);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_ESTABLISHED);
|
|
|
|
ni->ni_mllid = meshpeer->peer_llinkid;
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM,
|
|
|
|
args);
|
|
|
|
mesh_peer_timeout_stop(ni);
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_ESTABLISHED:
|
|
|
|
if (ni->ni_mllid != meshpeer->peer_llinkid) {
|
|
|
|
args[0] = ni->ni_mllid;
|
|
|
|
args[1] = ni->ni_mlpid;
|
|
|
|
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM,
|
|
|
|
args);
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_HOLDING:
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = meshpeer->peer_llinkid;
|
|
|
|
args[2] = IEEE80211_REASON_MESH_MAX_RETRIES;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_recv_action_meshpeering_confirm(struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh,
|
|
|
|
const uint8_t *frm, const uint8_t *efrm)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211_meshpeer_ie ie;
|
|
|
|
const struct ieee80211_meshpeer_ie *meshpeer;
|
|
|
|
uint16_t args[3];
|
|
|
|
|
|
|
|
/* +2+2+2+2 for action + code + capabilites + status code + AID */
|
2009-09-22 18:18:14 +00:00
|
|
|
meshpeer = mesh_parse_meshpeering_action(ni, wh, frm+2+2+2+2, efrm, &ie,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CONFIRM);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (meshpeer == NULL) {
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
|
|
|
|
"recv PEER CONFIRM, local id 0x%x, peer id 0x%x",
|
|
|
|
meshpeer->peer_llinkid, meshpeer->peer_linkid);
|
|
|
|
|
|
|
|
switch (ni->ni_mlstate) {
|
|
|
|
case IEEE80211_NODE_MESH_OPENRCV:
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_ESTABLISHED);
|
|
|
|
mesh_peer_timeout_stop(ni);
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_OPENSNT:
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_CONFIRMRCV);
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_HOLDING:
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = meshpeer->peer_llinkid;
|
|
|
|
args[2] = IEEE80211_REASON_MESH_MAX_RETRIES;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_CONFIRMRCV:
|
|
|
|
if (ni->ni_mllid != meshpeer->peer_llinkid) {
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
args[2] = IEEE80211_REASON_PEER_LINK_CANCELED;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
IEEE80211_DISCARD(vap,
|
|
|
|
IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
|
|
|
|
wh, NULL, "received confirm in invalid state %d",
|
|
|
|
ni->ni_mlstate);
|
|
|
|
vap->iv_stats.is_rx_mgtdiscard++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_recv_action_meshpeering_close(struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh,
|
|
|
|
const uint8_t *frm, const uint8_t *efrm)
|
|
|
|
{
|
|
|
|
uint16_t args[3];
|
|
|
|
|
|
|
|
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH,
|
|
|
|
ni, "%s", "recv PEER CLOSE");
|
|
|
|
|
|
|
|
switch (ni->ni_mlstate) {
|
|
|
|
case IEEE80211_NODE_MESH_IDLE:
|
|
|
|
/* ignore */
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_OPENRCV:
|
|
|
|
case IEEE80211_NODE_MESH_OPENSNT:
|
|
|
|
case IEEE80211_NODE_MESH_CONFIRMRCV:
|
|
|
|
case IEEE80211_NODE_MESH_ESTABLISHED:
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[1] = ni->ni_mllid;
|
|
|
|
args[2] = IEEE80211_REASON_MESH_CLOSE_RCVD;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE,
|
|
|
|
args);
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_HOLDING:
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_IDLE);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Link Metric handling.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
mesh_recv_action_meshlmetric_req(struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh,
|
|
|
|
const uint8_t *frm, const uint8_t *efrm)
|
|
|
|
{
|
|
|
|
uint32_t metric;
|
|
|
|
|
|
|
|
metric = mesh_airtime_calc(ni);
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHLMETRIC,
|
|
|
|
IEEE80211_ACTION_MESHLMETRIC_REP,
|
|
|
|
&metric);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_recv_action_meshlmetric_rep(struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh,
|
|
|
|
const uint8_t *frm, const uint8_t *efrm)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_send_action(struct ieee80211_node *ni, struct mbuf *m)
|
|
|
|
{
|
|
|
|
struct ieee80211_bpf_params params;
|
|
|
|
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
|
|
params.ibp_pri = WME_AC_VO;
|
|
|
|
params.ibp_rate0 = ni->ni_txparms->mgmtrate;
|
|
|
|
/* XXX ucast/mcast */
|
|
|
|
params.ibp_try0 = ni->ni_txparms->maxretry;
|
|
|
|
params.ibp_power = ni->ni_txpower;
|
|
|
|
return ieee80211_mgmt_output(ni, m, IEEE80211_FC0_SUBTYPE_ACTION,
|
|
|
|
¶ms);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define ADDSHORT(frm, v) do { \
|
|
|
|
frm[0] = (v) & 0xff; \
|
|
|
|
frm[1] = (v) >> 8; \
|
|
|
|
frm += 2; \
|
|
|
|
} while (0)
|
|
|
|
#define ADDWORD(frm, v) do { \
|
|
|
|
frm[0] = (v) & 0xff; \
|
|
|
|
frm[1] = ((v) >> 8) & 0xff; \
|
|
|
|
frm[2] = ((v) >> 16) & 0xff; \
|
|
|
|
frm[3] = ((v) >> 24) & 0xff; \
|
|
|
|
frm += 4; \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_send_action_meshpeering_open(struct ieee80211_node *ni,
|
|
|
|
int category, int action, void *args0)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
uint16_t *args = args0;
|
|
|
|
const struct ieee80211_rateset *rs;
|
|
|
|
struct mbuf *m;
|
|
|
|
uint8_t *frm;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
|
|
|
|
"send PEER OPEN action: localid 0x%x", args[0]);
|
|
|
|
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
|
|
|
|
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
|
|
|
|
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
|
|
|
|
ieee80211_ref_node(ni);
|
|
|
|
|
|
|
|
m = ieee80211_getmgtframe(&frm,
|
|
|
|
ic->ic_headroom + sizeof(struct ieee80211_frame),
|
|
|
|
sizeof(uint16_t) /* action+category */
|
|
|
|
+ sizeof(uint16_t) /* capabilites */
|
|
|
|
+ 2 + IEEE80211_RATE_SIZE
|
|
|
|
+ 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE)
|
|
|
|
+ 2 + IEEE80211_MESHID_LEN
|
|
|
|
+ sizeof(struct ieee80211_meshconf_ie)
|
|
|
|
+ sizeof(struct ieee80211_meshpeer_ie)
|
|
|
|
);
|
|
|
|
if (m != NULL) {
|
|
|
|
/*
|
|
|
|
* mesh peer open action frame format:
|
|
|
|
* [1] category
|
|
|
|
* [1] action
|
|
|
|
* [2] capabilities
|
|
|
|
* [tlv] rates
|
|
|
|
* [tlv] xrates
|
|
|
|
* [tlv] mesh id
|
|
|
|
* [tlv] mesh conf
|
|
|
|
* [tlv] mesh peer link mgmt
|
|
|
|
*/
|
|
|
|
*frm++ = category;
|
|
|
|
*frm++ = action;
|
|
|
|
ADDSHORT(frm, ieee80211_getcapinfo(vap, ni->ni_chan));
|
|
|
|
rs = ieee80211_get_suprates(ic, ic->ic_curchan);
|
|
|
|
frm = ieee80211_add_rates(frm, rs);
|
|
|
|
frm = ieee80211_add_xrates(frm, rs);
|
|
|
|
frm = ieee80211_add_meshid(frm, vap);
|
|
|
|
frm = ieee80211_add_meshconf(frm, vap);
|
|
|
|
frm = ieee80211_add_meshpeer(frm, IEEE80211_MESH_PEER_LINK_OPEN,
|
|
|
|
args[0], 0, 0);
|
|
|
|
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
|
|
|
|
return mesh_send_action(ni, m);
|
|
|
|
} else {
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_send_action_meshpeering_confirm(struct ieee80211_node *ni,
|
|
|
|
int category, int action, void *args0)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
uint16_t *args = args0;
|
|
|
|
const struct ieee80211_rateset *rs;
|
|
|
|
struct mbuf *m;
|
|
|
|
uint8_t *frm;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
|
|
|
|
"send PEER CONFIRM action: localid 0x%x, peerid 0x%x",
|
|
|
|
args[0], args[1]);
|
|
|
|
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
|
|
|
|
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
|
|
|
|
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
|
|
|
|
ieee80211_ref_node(ni);
|
|
|
|
|
|
|
|
m = ieee80211_getmgtframe(&frm,
|
|
|
|
ic->ic_headroom + sizeof(struct ieee80211_frame),
|
|
|
|
sizeof(uint16_t) /* action+category */
|
|
|
|
+ sizeof(uint16_t) /* capabilites */
|
|
|
|
+ sizeof(uint16_t) /* status code */
|
|
|
|
+ sizeof(uint16_t) /* AID */
|
|
|
|
+ 2 + IEEE80211_RATE_SIZE
|
|
|
|
+ 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE)
|
|
|
|
+ 2 + IEEE80211_MESHID_LEN
|
|
|
|
+ sizeof(struct ieee80211_meshconf_ie)
|
|
|
|
+ sizeof(struct ieee80211_meshpeer_ie)
|
|
|
|
);
|
|
|
|
if (m != NULL) {
|
|
|
|
/*
|
|
|
|
* mesh peer confirm action frame format:
|
|
|
|
* [1] category
|
|
|
|
* [1] action
|
|
|
|
* [2] capabilities
|
|
|
|
* [2] status code
|
|
|
|
* [2] association id (peer ID)
|
|
|
|
* [tlv] rates
|
|
|
|
* [tlv] xrates
|
|
|
|
* [tlv] mesh id
|
|
|
|
* [tlv] mesh conf
|
|
|
|
* [tlv] mesh peer link mgmt
|
|
|
|
*/
|
|
|
|
*frm++ = category;
|
|
|
|
*frm++ = action;
|
|
|
|
ADDSHORT(frm, ieee80211_getcapinfo(vap, ni->ni_chan));
|
|
|
|
ADDSHORT(frm, 0); /* status code */
|
|
|
|
ADDSHORT(frm, args[1]); /* AID */
|
|
|
|
rs = ieee80211_get_suprates(ic, ic->ic_curchan);
|
|
|
|
frm = ieee80211_add_rates(frm, rs);
|
|
|
|
frm = ieee80211_add_xrates(frm, rs);
|
|
|
|
frm = ieee80211_add_meshid(frm, vap);
|
|
|
|
frm = ieee80211_add_meshconf(frm, vap);
|
|
|
|
frm = ieee80211_add_meshpeer(frm,
|
|
|
|
IEEE80211_MESH_PEER_LINK_CONFIRM,
|
|
|
|
args[0], args[1], 0);
|
|
|
|
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
|
|
|
|
return mesh_send_action(ni, m);
|
|
|
|
} else {
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_send_action_meshpeering_close(struct ieee80211_node *ni,
|
|
|
|
int category, int action, void *args0)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
uint16_t *args = args0;
|
|
|
|
struct mbuf *m;
|
|
|
|
uint8_t *frm;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
|
|
|
|
"send PEER CLOSE action: localid 0x%x, peerid 0x%x reason %d",
|
|
|
|
args[0], args[1], args[2]);
|
|
|
|
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
|
|
|
|
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
|
|
|
|
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
|
|
|
|
ieee80211_ref_node(ni);
|
|
|
|
|
|
|
|
m = ieee80211_getmgtframe(&frm,
|
|
|
|
ic->ic_headroom + sizeof(struct ieee80211_frame),
|
|
|
|
sizeof(uint16_t) /* action+category */
|
|
|
|
+ sizeof(uint16_t) /* reason code */
|
|
|
|
+ 2 + IEEE80211_MESHID_LEN
|
|
|
|
+ sizeof(struct ieee80211_meshpeer_ie)
|
|
|
|
);
|
|
|
|
if (m != NULL) {
|
|
|
|
/*
|
|
|
|
* mesh peer close action frame format:
|
|
|
|
* [1] category
|
|
|
|
* [1] action
|
|
|
|
* [2] reason code
|
|
|
|
* [tlv] mesh id
|
|
|
|
* [tlv] mesh peer link mgmt
|
|
|
|
*/
|
|
|
|
*frm++ = category;
|
|
|
|
*frm++ = action;
|
|
|
|
ADDSHORT(frm, args[2]); /* reason code */
|
|
|
|
frm = ieee80211_add_meshid(frm, vap);
|
|
|
|
frm = ieee80211_add_meshpeer(frm,
|
|
|
|
IEEE80211_MESH_PEER_LINK_CLOSE,
|
|
|
|
args[0], args[1], args[2]);
|
|
|
|
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
|
|
|
|
return mesh_send_action(ni, m);
|
|
|
|
} else {
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_send_action_meshlink_request(struct ieee80211_node *ni,
|
|
|
|
int category, int action, void *arg0)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
struct mbuf *m;
|
|
|
|
uint8_t *frm;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
|
|
|
|
"%s", "send LINK METRIC REQUEST action");
|
|
|
|
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
|
|
|
|
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
|
|
|
|
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
|
|
|
|
ieee80211_ref_node(ni);
|
|
|
|
|
|
|
|
m = ieee80211_getmgtframe(&frm,
|
|
|
|
ic->ic_headroom + sizeof(struct ieee80211_frame),
|
|
|
|
sizeof(uint16_t) /* action+category */
|
|
|
|
);
|
|
|
|
if (m != NULL) {
|
|
|
|
/*
|
|
|
|
* mesh link metric request
|
|
|
|
* [1] category
|
|
|
|
* [1] action
|
|
|
|
*/
|
|
|
|
*frm++ = category;
|
|
|
|
*frm++ = action;
|
|
|
|
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
|
|
|
|
return mesh_send_action(ni, m);
|
|
|
|
} else {
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_send_action_meshlink_reply(struct ieee80211_node *ni,
|
|
|
|
int category, int action, void *args0)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
uint32_t *metric = args0;
|
|
|
|
struct mbuf *m;
|
|
|
|
uint8_t *frm;
|
|
|
|
|
|
|
|
IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_MESH, ni,
|
|
|
|
"send LINK METRIC REPLY action: metric 0x%x", *metric);
|
|
|
|
|
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
|
|
|
|
"ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__,
|
|
|
|
ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1);
|
|
|
|
ieee80211_ref_node(ni);
|
|
|
|
|
|
|
|
m = ieee80211_getmgtframe(&frm,
|
|
|
|
ic->ic_headroom + sizeof(struct ieee80211_frame),
|
|
|
|
sizeof(uint16_t) /* action+category */
|
|
|
|
+ sizeof(struct ieee80211_meshlmetric_ie)
|
|
|
|
);
|
|
|
|
if (m != NULL) {
|
|
|
|
/*
|
|
|
|
* mesh link metric reply
|
|
|
|
* [1] category
|
|
|
|
* [1] action
|
|
|
|
* [tlv] mesh link metric
|
|
|
|
*/
|
|
|
|
*frm++ = category;
|
|
|
|
*frm++ = action;
|
|
|
|
frm = ieee80211_add_meshlmetric(frm, *metric);
|
|
|
|
m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *);
|
|
|
|
return mesh_send_action(ni, m);
|
|
|
|
} else {
|
|
|
|
vap->iv_stats.is_tx_nobuf++;
|
|
|
|
ieee80211_free_node(ni);
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
mesh_peer_timeout_setup(struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
switch (ni->ni_mlstate) {
|
|
|
|
case IEEE80211_NODE_MESH_HOLDING:
|
|
|
|
ni->ni_mltval = ieee80211_mesh_holdingtimeout;
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_CONFIRMRCV:
|
|
|
|
ni->ni_mltval = ieee80211_mesh_confirmtimeout;
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_IDLE:
|
|
|
|
ni->ni_mltval = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ni->ni_mltval = ieee80211_mesh_retrytimeout;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (ni->ni_mltval)
|
|
|
|
callout_reset(&ni->ni_mltimer, ni->ni_mltval,
|
|
|
|
mesh_peer_timeout_cb, ni);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Same as above but backoffs timer statisically 50%.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mesh_peer_timeout_backoff(struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
uint32_t r;
|
|
|
|
|
|
|
|
r = arc4random();
|
|
|
|
ni->ni_mltval += r % ni->ni_mltval;
|
|
|
|
callout_reset(&ni->ni_mltimer, ni->ni_mltval, mesh_peer_timeout_cb,
|
|
|
|
ni);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline void
|
|
|
|
mesh_peer_timeout_stop(struct ieee80211_node *ni)
|
|
|
|
{
|
2009-07-20 19:12:08 +00:00
|
|
|
callout_drain(&ni->ni_mltimer);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Mesh Peer Link Management FSM timeout handling.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
mesh_peer_timeout_cb(void *arg)
|
|
|
|
{
|
|
|
|
struct ieee80211_node *ni = (struct ieee80211_node *)arg;
|
|
|
|
uint16_t args[3];
|
|
|
|
|
|
|
|
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_MESH,
|
|
|
|
ni, "mesh link timeout, state %d, retry counter %d",
|
|
|
|
ni->ni_mlstate, ni->ni_mlrcnt);
|
|
|
|
|
|
|
|
switch (ni->ni_mlstate) {
|
|
|
|
case IEEE80211_NODE_MESH_IDLE:
|
|
|
|
case IEEE80211_NODE_MESH_ESTABLISHED:
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_OPENSNT:
|
|
|
|
case IEEE80211_NODE_MESH_OPENRCV:
|
|
|
|
if (ni->ni_mlrcnt == ieee80211_mesh_maxretries) {
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[2] = IEEE80211_REASON_MESH_MAX_RETRIES;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE, args);
|
|
|
|
ni->ni_mlrcnt = 0;
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
} else {
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_OPEN, args);
|
|
|
|
ni->ni_mlrcnt++;
|
|
|
|
mesh_peer_timeout_backoff(ni);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_CONFIRMRCV:
|
|
|
|
if (ni->ni_mlrcnt == ieee80211_mesh_maxretries) {
|
|
|
|
args[0] = ni->ni_mlpid;
|
|
|
|
args[2] = IEEE80211_REASON_MESH_CONFIRM_TIMEOUT;
|
|
|
|
ieee80211_send_action(ni,
|
|
|
|
IEEE80211_ACTION_CAT_MESHPEERING,
|
|
|
|
IEEE80211_ACTION_MESHPEERING_CLOSE, args);
|
|
|
|
ni->ni_mlrcnt = 0;
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_HOLDING);
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
} else {
|
|
|
|
ni->ni_mlrcnt++;
|
|
|
|
mesh_peer_timeout_setup(ni);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case IEEE80211_NODE_MESH_HOLDING:
|
|
|
|
mesh_linkchange(ni, IEEE80211_NODE_MESH_IDLE);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-07-13 18:23:58 +00:00
|
|
|
static int
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
mesh_verify_meshid(struct ieee80211vap *vap, const uint8_t *ie)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
|
|
|
|
if (ie == NULL || ie[1] != ms->ms_idlen)
|
|
|
|
return 1;
|
|
|
|
return memcmp(ms->ms_id, ie + 2, ms->ms_idlen);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if we are using the same algorithms for this mesh.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
mesh_verify_meshconf(struct ieee80211vap *vap, const uint8_t *ie)
|
|
|
|
{
|
|
|
|
const struct ieee80211_meshconf_ie *meshconf =
|
|
|
|
(const struct ieee80211_meshconf_ie *) ie;
|
|
|
|
const struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
2010-01-14 19:23:41 +00:00
|
|
|
uint16_t cap;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
if (meshconf == NULL)
|
|
|
|
return 1;
|
2009-10-12 10:08:58 +00:00
|
|
|
if (meshconf->conf_pselid != ms->ms_ppath->mpp_ie) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
|
2009-10-12 10:08:58 +00:00
|
|
|
"unknown path selection algorithm: 0x%x\n",
|
|
|
|
meshconf->conf_pselid);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2009-10-12 10:08:58 +00:00
|
|
|
if (meshconf->conf_pmetid != ms->ms_pmetric->mpm_ie) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
|
2009-10-12 10:08:58 +00:00
|
|
|
"unknown path metric algorithm: 0x%x\n",
|
|
|
|
meshconf->conf_pmetid);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2009-10-12 10:08:58 +00:00
|
|
|
if (meshconf->conf_ccid != 0) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
|
2009-10-12 10:08:58 +00:00
|
|
|
"unknown congestion control algorithm: 0x%x\n",
|
|
|
|
meshconf->conf_ccid);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2009-10-12 10:08:58 +00:00
|
|
|
if (meshconf->conf_syncid != IEEE80211_MESHCONF_SYNC_NEIGHOFF) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
|
2009-10-12 10:08:58 +00:00
|
|
|
"unknown sync algorithm: 0x%x\n",
|
|
|
|
meshconf->conf_syncid);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2009-10-12 10:08:58 +00:00
|
|
|
if (meshconf->conf_authid != 0) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
|
2009-10-12 10:08:58 +00:00
|
|
|
"unknown auth auth algorithm: 0x%x\n",
|
|
|
|
meshconf->conf_pselid);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2010-01-14 19:23:41 +00:00
|
|
|
/* NB: conf_cap is only read correctly here */
|
|
|
|
cap = LE_READ_2(&meshconf->conf_cap);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/* Not accepting peers */
|
2010-01-14 19:23:41 +00:00
|
|
|
if (!(cap & IEEE80211_MESHCONF_CAP_AP)) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_DPRINTF(vap, IEEE80211_MSG_MESH,
|
|
|
|
"not accepting peers: 0x%x\n", meshconf->conf_cap);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2009-09-22 18:18:14 +00:00
|
|
|
mesh_verify_meshpeer(struct ieee80211vap *vap, uint8_t subtype,
|
|
|
|
const uint8_t *ie)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
{
|
|
|
|
const struct ieee80211_meshpeer_ie *meshpeer =
|
|
|
|
(const struct ieee80211_meshpeer_ie *) ie;
|
|
|
|
|
2009-09-22 18:18:14 +00:00
|
|
|
if (meshpeer == NULL || meshpeer->peer_len < 6 ||
|
|
|
|
meshpeer->peer_len > 10)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
2009-09-22 18:18:14 +00:00
|
|
|
switch (subtype) {
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
case IEEE80211_MESH_PEER_LINK_OPEN:
|
2009-09-22 18:18:14 +00:00
|
|
|
if (meshpeer->peer_len != 6)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
break;
|
|
|
|
case IEEE80211_MESH_PEER_LINK_CONFIRM:
|
2009-09-22 18:18:14 +00:00
|
|
|
if (meshpeer->peer_len != 8)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
break;
|
|
|
|
case IEEE80211_MESH_PEER_LINK_CLOSE:
|
2009-09-22 18:18:14 +00:00
|
|
|
if (meshpeer->peer_len < 8)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
2009-09-22 18:18:14 +00:00
|
|
|
if (meshpeer->peer_len == 8 && meshpeer->peer_linkid != 0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return 1;
|
|
|
|
if (meshpeer->peer_rcode == 0)
|
|
|
|
return 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Mesh ID IE to a frame.
|
|
|
|
*/
|
|
|
|
uint8_t *
|
|
|
|
ieee80211_add_meshid(uint8_t *frm, struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
|
|
|
|
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS, ("not a mbss vap"));
|
|
|
|
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHID;
|
|
|
|
*frm++ = ms->ms_idlen;
|
|
|
|
memcpy(frm, ms->ms_id, ms->ms_idlen);
|
|
|
|
return frm + ms->ms_idlen;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Mesh Configuration IE to a frame.
|
|
|
|
* For now just use HWMP routing, Airtime link metric, Null Congestion
|
|
|
|
* Signaling, Null Sync Protocol and Null Authentication.
|
|
|
|
*/
|
|
|
|
uint8_t *
|
|
|
|
ieee80211_add_meshconf(uint8_t *frm, struct ieee80211vap *vap)
|
|
|
|
{
|
|
|
|
const struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
2010-01-12 22:22:27 +00:00
|
|
|
uint16_t caps;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
|
|
|
|
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS, ("not a MBSS vap"));
|
|
|
|
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHCONF;
|
|
|
|
*frm++ = sizeof(struct ieee80211_meshconf_ie) - 2;
|
2009-10-12 10:08:58 +00:00
|
|
|
*frm++ = ms->ms_ppath->mpp_ie; /* path selection */
|
|
|
|
*frm++ = ms->ms_pmetric->mpm_ie; /* link metric */
|
|
|
|
*frm++ = IEEE80211_MESHCONF_CC_DISABLED;
|
|
|
|
*frm++ = IEEE80211_MESHCONF_SYNC_NEIGHOFF;
|
|
|
|
*frm++ = IEEE80211_MESHCONF_AUTH_DISABLED;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
/* NB: set the number of neighbors before the rest */
|
|
|
|
*frm = (ms->ms_neighbors > 15 ? 15 : ms->ms_neighbors) << 1;
|
|
|
|
if (ms->ms_flags & IEEE80211_MESHFLAGS_PORTAL)
|
|
|
|
*frm |= IEEE80211_MESHCONF_FORM_MP;
|
|
|
|
frm += 1;
|
2010-01-12 22:22:27 +00:00
|
|
|
caps = 0;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (ms->ms_flags & IEEE80211_MESHFLAGS_AP)
|
2010-01-12 22:22:27 +00:00
|
|
|
caps |= IEEE80211_MESHCONF_CAP_AP;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
if (ms->ms_flags & IEEE80211_MESHFLAGS_FWD)
|
2010-01-12 22:22:27 +00:00
|
|
|
caps |= IEEE80211_MESHCONF_CAP_FWRD;
|
|
|
|
ADDSHORT(frm, caps);
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Mesh Peer Management IE to a frame.
|
|
|
|
*/
|
|
|
|
uint8_t *
|
|
|
|
ieee80211_add_meshpeer(uint8_t *frm, uint8_t subtype, uint16_t localid,
|
|
|
|
uint16_t peerid, uint16_t reason)
|
|
|
|
{
|
2009-09-22 18:18:14 +00:00
|
|
|
/* XXX change for AH */
|
|
|
|
static const uint8_t meshpeerproto[4] = IEEE80211_MESH_PEER_PROTO;
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
KASSERT(localid != 0, ("localid == 0"));
|
|
|
|
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHPEER;
|
|
|
|
switch (subtype) {
|
|
|
|
case IEEE80211_MESH_PEER_LINK_OPEN:
|
2009-10-12 10:30:15 +00:00
|
|
|
*frm++ = 6; /* length */
|
2009-09-22 18:18:14 +00:00
|
|
|
memcpy(frm, meshpeerproto, 4);
|
|
|
|
frm += 4;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ADDSHORT(frm, localid); /* local ID */
|
|
|
|
break;
|
|
|
|
case IEEE80211_MESH_PEER_LINK_CONFIRM:
|
|
|
|
KASSERT(peerid != 0, ("sending peer confirm without peer id"));
|
2009-09-22 18:18:14 +00:00
|
|
|
*frm++ = 8; /* length */
|
|
|
|
memcpy(frm, meshpeerproto, 4);
|
|
|
|
frm += 4;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ADDSHORT(frm, localid); /* local ID */
|
|
|
|
ADDSHORT(frm, peerid); /* peer ID */
|
|
|
|
break;
|
|
|
|
case IEEE80211_MESH_PEER_LINK_CLOSE:
|
|
|
|
if (peerid)
|
2009-09-22 18:18:14 +00:00
|
|
|
*frm++ = 10; /* length */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
else
|
2009-09-22 18:18:14 +00:00
|
|
|
*frm++ = 8; /* length */
|
|
|
|
memcpy(frm, meshpeerproto, 4);
|
|
|
|
frm += 4;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ADDSHORT(frm, localid); /* local ID */
|
|
|
|
if (peerid)
|
|
|
|
ADDSHORT(frm, peerid); /* peer ID */
|
|
|
|
ADDSHORT(frm, reason);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Compute an Airtime Link Metric for the link with this node.
|
|
|
|
*
|
|
|
|
* Based on Draft 3.0 spec (11B.10, p.149).
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* Max 802.11s overhead.
|
|
|
|
*/
|
|
|
|
#define IEEE80211_MESH_MAXOVERHEAD \
|
|
|
|
(sizeof(struct ieee80211_qosframe_addr4) \
|
|
|
|
+ sizeof(struct ieee80211_meshcntl_ae11) \
|
|
|
|
+ sizeof(struct llc) \
|
|
|
|
+ IEEE80211_ADDR_LEN \
|
|
|
|
+ IEEE80211_WEP_IVLEN \
|
|
|
|
+ IEEE80211_WEP_KIDLEN \
|
|
|
|
+ IEEE80211_WEP_CRCLEN \
|
|
|
|
+ IEEE80211_WEP_MICLEN \
|
|
|
|
+ IEEE80211_CRC_LEN)
|
|
|
|
uint32_t
|
|
|
|
mesh_airtime_calc(struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
#define M_BITS 8
|
|
|
|
#define S_FACTOR (2 * M_BITS)
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
struct ifnet *ifp = ni->ni_vap->iv_ifp;
|
|
|
|
const static int nbits = 8192 << M_BITS;
|
|
|
|
uint32_t overhead, rate, errrate;
|
|
|
|
uint64_t res;
|
|
|
|
|
|
|
|
/* Time to transmit a frame */
|
|
|
|
rate = ni->ni_txrate;
|
|
|
|
overhead = ieee80211_compute_duration(ic->ic_rt,
|
|
|
|
ifp->if_mtu + IEEE80211_MESH_MAXOVERHEAD, rate, 0) << M_BITS;
|
|
|
|
/* Error rate in percentage */
|
|
|
|
/* XXX assuming small failures are ok */
|
|
|
|
errrate = (((ifp->if_oerrors +
|
|
|
|
ifp->if_ierrors) / 100) << M_BITS) / 100;
|
|
|
|
res = (overhead + (nbits / rate)) *
|
|
|
|
((1 << S_FACTOR) / ((1 << M_BITS) - errrate));
|
|
|
|
|
|
|
|
return (uint32_t)(res >> S_FACTOR);
|
|
|
|
#undef M_BITS
|
|
|
|
#undef S_FACTOR
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add a Mesh Link Metric report IE to a frame.
|
|
|
|
*/
|
|
|
|
uint8_t *
|
|
|
|
ieee80211_add_meshlmetric(uint8_t *frm, uint32_t metric)
|
|
|
|
{
|
|
|
|
*frm++ = IEEE80211_ELEMID_MESHLINK;
|
|
|
|
*frm++ = 4;
|
|
|
|
ADDWORD(frm, metric);
|
|
|
|
return frm;
|
|
|
|
}
|
|
|
|
#undef ADDSHORT
|
|
|
|
#undef ADDWORD
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize any mesh-specific node state.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
ieee80211_mesh_node_init(struct ieee80211vap *vap, struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
ni->ni_flags |= IEEE80211_NODE_QOS;
|
|
|
|
callout_init(&ni->ni_mltimer, CALLOUT_MPSAFE);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Cleanup any mesh-specific node state.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
ieee80211_mesh_node_cleanup(struct ieee80211_node *ni)
|
|
|
|
{
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
|
|
|
|
callout_drain(&ni->ni_mltimer);
|
|
|
|
/* NB: short-circuit callbacks after mesh_vdetach */
|
|
|
|
if (vap->iv_mesh != NULL)
|
|
|
|
ms->ms_ppath->mpp_peerdown(ni);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
ieee80211_parse_meshid(struct ieee80211_node *ni, const uint8_t *ie)
|
|
|
|
{
|
|
|
|
ni->ni_meshidlen = ie[1];
|
|
|
|
memcpy(ni->ni_meshid, ie + 2, ie[1]);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Setup mesh-specific node state on neighbor discovery.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
ieee80211_mesh_init_neighbor(struct ieee80211_node *ni,
|
|
|
|
const struct ieee80211_frame *wh,
|
|
|
|
const struct ieee80211_scanparams *sp)
|
|
|
|
{
|
|
|
|
ieee80211_parse_meshid(ni, sp->meshid);
|
|
|
|
}
|
|
|
|
|
2009-10-19 18:46:22 +00:00
|
|
|
void
|
|
|
|
ieee80211_mesh_update_beacon(struct ieee80211vap *vap,
|
|
|
|
struct ieee80211_beacon_offsets *bo)
|
|
|
|
{
|
|
|
|
KASSERT(vap->iv_opmode == IEEE80211_M_MBSS, ("not a MBSS vap"));
|
|
|
|
|
|
|
|
if (isset(bo->bo_flags, IEEE80211_BEACON_MESHCONF)) {
|
|
|
|
(void)ieee80211_add_meshconf(bo->bo_meshconf, vap);
|
|
|
|
clrbit(bo->bo_flags, IEEE80211_BEACON_MESHCONF);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
static int
|
|
|
|
mesh_ioctl_get80211(struct ieee80211vap *vap, struct ieee80211req *ireq)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
uint8_t tmpmeshid[IEEE80211_NWID_LEN];
|
|
|
|
struct ieee80211_mesh_route *rt;
|
|
|
|
struct ieee80211req_mesh_route *imr;
|
|
|
|
size_t len, off;
|
|
|
|
uint8_t *p;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
if (vap->iv_opmode != IEEE80211_M_MBSS)
|
|
|
|
return ENOSYS;
|
|
|
|
|
|
|
|
error = 0;
|
|
|
|
switch (ireq->i_type) {
|
|
|
|
case IEEE80211_IOC_MESH_ID:
|
|
|
|
ireq->i_len = ms->ms_idlen;
|
|
|
|
memcpy(tmpmeshid, ms->ms_id, ireq->i_len);
|
|
|
|
error = copyout(tmpmeshid, ireq->i_data, ireq->i_len);
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_AP:
|
|
|
|
ireq->i_val = (ms->ms_flags & IEEE80211_MESHFLAGS_AP) != 0;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_FWRD:
|
|
|
|
ireq->i_val = (ms->ms_flags & IEEE80211_MESHFLAGS_FWD) != 0;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_TTL:
|
|
|
|
ireq->i_val = ms->ms_ttl;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_RTCMD:
|
|
|
|
switch (ireq->i_val) {
|
|
|
|
case IEEE80211_MESH_RTCMD_LIST:
|
|
|
|
len = 0;
|
|
|
|
MESH_RT_LOCK(ms);
|
|
|
|
TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) {
|
|
|
|
len += sizeof(*imr);
|
|
|
|
}
|
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
if (len > ireq->i_len || ireq->i_len < sizeof(*imr)) {
|
|
|
|
ireq->i_len = len;
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
ireq->i_len = len;
|
2009-07-20 19:12:08 +00:00
|
|
|
/* XXX M_WAIT? */
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
p = malloc(len, M_TEMP, M_NOWAIT | M_ZERO);
|
|
|
|
if (p == NULL)
|
|
|
|
return ENOMEM;
|
|
|
|
off = 0;
|
|
|
|
MESH_RT_LOCK(ms);
|
|
|
|
TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) {
|
|
|
|
if (off >= len)
|
|
|
|
break;
|
|
|
|
imr = (struct ieee80211req_mesh_route *)
|
|
|
|
(p + off);
|
2009-07-27 14:22:09 +00:00
|
|
|
imr->imr_flags = rt->rt_flags;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
IEEE80211_ADDR_COPY(imr->imr_dest,
|
|
|
|
rt->rt_dest);
|
|
|
|
IEEE80211_ADDR_COPY(imr->imr_nexthop,
|
|
|
|
rt->rt_nexthop);
|
|
|
|
imr->imr_metric = rt->rt_metric;
|
|
|
|
imr->imr_nhops = rt->rt_nhops;
|
|
|
|
imr->imr_lifetime = rt->rt_lifetime;
|
2009-07-20 19:12:08 +00:00
|
|
|
imr->imr_lastmseq = rt->rt_lastmseq;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
off += sizeof(*imr);
|
|
|
|
}
|
|
|
|
MESH_RT_UNLOCK(ms);
|
|
|
|
error = copyout(p, (uint8_t *)ireq->i_data,
|
|
|
|
ireq->i_len);
|
|
|
|
free(p, M_TEMP);
|
|
|
|
break;
|
|
|
|
case IEEE80211_MESH_RTCMD_FLUSH:
|
|
|
|
case IEEE80211_MESH_RTCMD_ADD:
|
|
|
|
case IEEE80211_MESH_RTCMD_DELETE:
|
|
|
|
return EINVAL;
|
|
|
|
default:
|
|
|
|
return ENOSYS;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_PR_METRIC:
|
|
|
|
len = strlen(ms->ms_pmetric->mpm_descr);
|
|
|
|
if (ireq->i_len < len)
|
|
|
|
return EINVAL;
|
|
|
|
ireq->i_len = len;
|
|
|
|
error = copyout(ms->ms_pmetric->mpm_descr,
|
|
|
|
(uint8_t *)ireq->i_data, len);
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_PR_PATH:
|
|
|
|
len = strlen(ms->ms_ppath->mpp_descr);
|
|
|
|
if (ireq->i_len < len)
|
|
|
|
return EINVAL;
|
|
|
|
ireq->i_len = len;
|
|
|
|
error = copyout(ms->ms_ppath->mpp_descr,
|
|
|
|
(uint8_t *)ireq->i_data, len);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ENOSYS;
|
|
|
|
}
|
|
|
|
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
IEEE80211_IOCTL_GET(mesh, mesh_ioctl_get80211);
|
|
|
|
|
|
|
|
static int
|
|
|
|
mesh_ioctl_set80211(struct ieee80211vap *vap, struct ieee80211req *ireq)
|
|
|
|
{
|
|
|
|
struct ieee80211_mesh_state *ms = vap->iv_mesh;
|
|
|
|
uint8_t tmpmeshid[IEEE80211_NWID_LEN];
|
|
|
|
uint8_t tmpaddr[IEEE80211_ADDR_LEN];
|
|
|
|
char tmpproto[IEEE80211_MESH_PROTO_DSZ];
|
|
|
|
int error;
|
|
|
|
|
|
|
|
if (vap->iv_opmode != IEEE80211_M_MBSS)
|
|
|
|
return ENOSYS;
|
|
|
|
|
|
|
|
error = 0;
|
|
|
|
switch (ireq->i_type) {
|
|
|
|
case IEEE80211_IOC_MESH_ID:
|
|
|
|
if (ireq->i_val != 0 || ireq->i_len > IEEE80211_MESHID_LEN)
|
|
|
|
return EINVAL;
|
|
|
|
error = copyin(ireq->i_data, tmpmeshid, ireq->i_len);
|
2009-07-20 19:12:08 +00:00
|
|
|
if (error != 0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
memset(ms->ms_id, 0, IEEE80211_NWID_LEN);
|
|
|
|
ms->ms_idlen = ireq->i_len;
|
|
|
|
memcpy(ms->ms_id, tmpmeshid, ireq->i_len);
|
2009-07-20 19:12:08 +00:00
|
|
|
error = ENETRESET;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_AP:
|
|
|
|
if (ireq->i_val)
|
|
|
|
ms->ms_flags |= IEEE80211_MESHFLAGS_AP;
|
|
|
|
else
|
|
|
|
ms->ms_flags &= ~IEEE80211_MESHFLAGS_AP;
|
2009-07-20 19:12:08 +00:00
|
|
|
error = ENETRESET;
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_FWRD:
|
|
|
|
if (ireq->i_val)
|
|
|
|
ms->ms_flags |= IEEE80211_MESHFLAGS_FWD;
|
|
|
|
else
|
|
|
|
ms->ms_flags &= ~IEEE80211_MESHFLAGS_FWD;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_TTL:
|
|
|
|
ms->ms_ttl = (uint8_t) ireq->i_val;
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_RTCMD:
|
|
|
|
switch (ireq->i_val) {
|
|
|
|
case IEEE80211_MESH_RTCMD_LIST:
|
|
|
|
return EINVAL;
|
|
|
|
case IEEE80211_MESH_RTCMD_FLUSH:
|
|
|
|
ieee80211_mesh_rt_flush(vap);
|
|
|
|
break;
|
|
|
|
case IEEE80211_MESH_RTCMD_ADD:
|
|
|
|
if (IEEE80211_ADDR_EQ(vap->iv_myaddr, ireq->i_data) ||
|
|
|
|
IEEE80211_ADDR_EQ(broadcastaddr, ireq->i_data))
|
|
|
|
return EINVAL;
|
|
|
|
error = copyin(ireq->i_data, &tmpaddr,
|
|
|
|
IEEE80211_ADDR_LEN);
|
2009-07-20 19:12:08 +00:00
|
|
|
if (error == 0)
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
ieee80211_mesh_discover(vap, tmpaddr, NULL);
|
|
|
|
break;
|
|
|
|
case IEEE80211_MESH_RTCMD_DELETE:
|
|
|
|
ieee80211_mesh_rt_del(vap, ireq->i_data);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ENOSYS;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_PR_METRIC:
|
|
|
|
error = copyin(ireq->i_data, tmpproto, sizeof(tmpproto));
|
2009-07-20 19:12:08 +00:00
|
|
|
if (error == 0) {
|
|
|
|
error = mesh_select_proto_metric(vap, tmpproto);
|
|
|
|
if (error == 0)
|
|
|
|
error = ENETRESET;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
case IEEE80211_IOC_MESH_PR_PATH:
|
|
|
|
error = copyin(ireq->i_data, tmpproto, sizeof(tmpproto));
|
2009-07-20 19:12:08 +00:00
|
|
|
if (error == 0) {
|
|
|
|
error = mesh_select_proto_path(vap, tmpproto);
|
|
|
|
if (error == 0)
|
|
|
|
error = ENETRESET;
|
|
|
|
}
|
Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
2009-07-11 15:02:45 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return ENOSYS;
|
|
|
|
}
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
IEEE80211_IOCTL_SET(mesh, mesh_ioctl_set80211);
|