freebsd-skq/sys/kern/kern_switch.c

508 lines
13 KiB
C
Raw Normal View History

/*-
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* Copyright (c) 2001 Jake Burkholder <jake@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_sched.h"
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kdb.h>
#include <sys/kernel.h>
#include <sys/ktr.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/queue.h>
#include <sys/sched.h>
Commit a partial lazy thread switch mechanism for i386. it isn't as lazy as it could be and can do with some more cleanup. Currently its under options LAZY_SWITCH. What this does is avoid %cr3 reloads for short context switches that do not involve another user process. ie: we can take an interrupt, switch to a kthread and return to the user without explicitly flushing the tlb. However, this isn't as exciting as it could be, the interrupt overhead is still high and too much blocks on Giant still. There are some debug sysctls, for stats and for an on/off switch. The main problem with doing this has been "what if the process that you're running on exits while we're borrowing its address space?" - in this case we use an IPI to give it a kick when we're about to reclaim the pmap. Its not compiled in unless you add the LAZY_SWITCH option. I want to fix a few more things and get some more feedback before turning it on by default. This is NOT a replacement for Bosko's lazy interrupt stuff. This was more meant for the kthread case, while his was for interrupts. Mine helps a little for interrupts, but his helps a lot more. The stats are enabled with options SWTCH_OPTIM_STATS - this has been a pseudo-option for years, I just added a bunch of stuff to it. One non-trivial change was to select a new thread before calling cpu_switch() in the first place. This allows us to catch the silly case of doing a cpu_switch() to the current process. This happens uncomfortably often. This simplifies a bit of the asm code in cpu_switch (no longer have to call choosethread() in the middle). This has been implemented on i386 and (thanks to jake) sparc64. The others will come soon. This is actually seperate to the lazy switch stuff. Glanced at by: jake, jhb
2003-04-02 23:53:30 +00:00
#include <sys/smp.h>
#include <sys/sysctl.h>
#include <machine/cpu.h>
/* Uncomment this to enable logging of critical_enter/exit. */
#if 0
#define KTR_CRITICAL KTR_SCHED
#else
#define KTR_CRITICAL 0
#endif
#ifdef FULL_PREEMPTION
#ifndef PREEMPTION
#error "The FULL_PREEMPTION option requires the PREEMPTION option"
#endif
#endif
CTASSERT((RQB_BPW * RQB_LEN) == RQ_NQS);
/*
* kern.sched.preemption allows user space to determine if preemption support
* is compiled in or not. It is not currently a boot or runtime flag that
* can be changed.
*/
#ifdef PREEMPTION
static int kern_sched_preemption = 1;
#else
static int kern_sched_preemption = 0;
#endif
SYSCTL_INT(_kern_sched, OID_AUTO, preemption, CTLFLAG_RD,
&kern_sched_preemption, 0, "Kernel preemption enabled");
/*
* Support for scheduler stats exported via kern.sched.stats. All stats may
* be reset with kern.sched.stats.reset = 1. Stats may be defined elsewhere
* with SCHED_STAT_DEFINE().
*/
#ifdef SCHED_STATS
SYSCTL_NODE(_kern_sched, OID_AUTO, stats, CTLFLAG_RW, 0, "switch stats");
/* Switch reasons from mi_switch(). */
DPCPU_DEFINE(long, sched_switch_stats[SWT_COUNT]);
SCHED_STAT_DEFINE_VAR(uncategorized,
&DPCPU_NAME(sched_switch_stats[SWT_NONE]), "");
SCHED_STAT_DEFINE_VAR(preempt,
&DPCPU_NAME(sched_switch_stats[SWT_PREEMPT]), "");
SCHED_STAT_DEFINE_VAR(owepreempt,
&DPCPU_NAME(sched_switch_stats[SWT_OWEPREEMPT]), "");
SCHED_STAT_DEFINE_VAR(turnstile,
&DPCPU_NAME(sched_switch_stats[SWT_TURNSTILE]), "");
SCHED_STAT_DEFINE_VAR(sleepq,
&DPCPU_NAME(sched_switch_stats[SWT_SLEEPQ]), "");
SCHED_STAT_DEFINE_VAR(sleepqtimo,
&DPCPU_NAME(sched_switch_stats[SWT_SLEEPQTIMO]), "");
SCHED_STAT_DEFINE_VAR(relinquish,
&DPCPU_NAME(sched_switch_stats[SWT_RELINQUISH]), "");
SCHED_STAT_DEFINE_VAR(needresched,
&DPCPU_NAME(sched_switch_stats[SWT_NEEDRESCHED]), "");
SCHED_STAT_DEFINE_VAR(idle,
&DPCPU_NAME(sched_switch_stats[SWT_IDLE]), "");
SCHED_STAT_DEFINE_VAR(iwait,
&DPCPU_NAME(sched_switch_stats[SWT_IWAIT]), "");
SCHED_STAT_DEFINE_VAR(suspend,
&DPCPU_NAME(sched_switch_stats[SWT_SUSPEND]), "");
SCHED_STAT_DEFINE_VAR(remotepreempt,
&DPCPU_NAME(sched_switch_stats[SWT_REMOTEPREEMPT]), "");
SCHED_STAT_DEFINE_VAR(remotewakeidle,
&DPCPU_NAME(sched_switch_stats[SWT_REMOTEWAKEIDLE]), "");
static int
sysctl_stats_reset(SYSCTL_HANDLER_ARGS)
{
struct sysctl_oid *p;
uintptr_t counter;
int error;
int val;
int i;
val = 0;
error = sysctl_handle_int(oidp, &val, 0, req);
if (error != 0 || req->newptr == NULL)
return (error);
if (val == 0)
return (0);
/*
* Traverse the list of children of _kern_sched_stats and reset each
* to 0. Skip the reset entry.
*/
SLIST_FOREACH(p, oidp->oid_parent, oid_link) {
if (p == oidp || p->oid_arg1 == NULL)
continue;
counter = (uintptr_t)p->oid_arg1;
CPU_FOREACH(i) {
*(long *)(dpcpu_off[i] + counter) = 0;
}
}
return (0);
}
SYSCTL_PROC(_kern_sched_stats, OID_AUTO, reset, CTLTYPE_INT | CTLFLAG_WR, NULL,
0, sysctl_stats_reset, "I", "Reset scheduler statistics");
#endif
/************************************************************************
* Functions that manipulate runnability from a thread perspective. *
************************************************************************/
/*
* Select the thread that will be run next.
*/
struct thread *
choosethread(void)
{
struct thread *td;
retry:
td = sched_choose();
/*
* If we are in panic, only allow system threads,
* plus the one we are running in, to be run.
*/
if (panicstr && ((td->td_proc->p_flag & P_SYSTEM) == 0 &&
(td->td_flags & TDF_INPANIC) == 0)) {
/* note that it is no longer on the run queue */
TD_SET_CAN_RUN(td);
goto retry;
}
TD_SET_RUNNING(td);
return (td);
}
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
/*
* Kernel thread preemption implementation. Critical sections mark
* regions of code in which preemptions are not allowed.
*/
void
critical_enter(void)
{
struct thread *td;
td = curthread;
td->td_critnest++;
CTR4(KTR_CRITICAL, "critical_enter by thread %p (%ld, %s) to %d", td,
(long)td->td_proc->p_pid, td->td_name, td->td_critnest);
}
void
critical_exit(void)
{
struct thread *td;
int flags;
td = curthread;
KASSERT(td->td_critnest != 0,
("critical_exit: td_critnest == 0"));
if (td->td_critnest == 1) {
td->td_critnest = 0;
if (td->td_owepreempt) {
td->td_critnest = 1;
thread_lock(td);
td->td_critnest--;
flags = SW_INVOL | SW_PREEMPT;
if (TD_IS_IDLETHREAD(td))
flags |= SWT_IDLE;
else
flags |= SWT_OWEPREEMPT;
mi_switch(flags, NULL);
thread_unlock(td);
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
}
2005-12-28 17:13:31 +00:00
} else
td->td_critnest--;
2005-12-28 17:13:31 +00:00
CTR4(KTR_CRITICAL, "critical_exit by thread %p (%ld, %s) to %d", td,
(long)td->td_proc->p_pid, td->td_name, td->td_critnest);
}
/************************************************************************
* SYSTEM RUN QUEUE manipulations and tests *
************************************************************************/
/*
* Initialize a run structure.
*/
void
runq_init(struct runq *rq)
{
int i;
bzero(rq, sizeof *rq);
for (i = 0; i < RQ_NQS; i++)
TAILQ_INIT(&rq->rq_queues[i]);
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
/*
* Clear the status bit of the queue corresponding to priority level pri,
* indicating that it is empty.
*/
static __inline void
runq_clrbit(struct runq *rq, int pri)
{
struct rqbits *rqb;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
rqb = &rq->rq_status;
CTR4(KTR_RUNQ, "runq_clrbit: bits=%#x %#x bit=%#x word=%d",
rqb->rqb_bits[RQB_WORD(pri)],
rqb->rqb_bits[RQB_WORD(pri)] & ~RQB_BIT(pri),
RQB_BIT(pri), RQB_WORD(pri));
rqb->rqb_bits[RQB_WORD(pri)] &= ~RQB_BIT(pri);
}
/*
* Find the index of the first non-empty run queue. This is done by
* scanning the status bits, a set bit indicates a non-empty queue.
*/
static __inline int
runq_findbit(struct runq *rq)
{
struct rqbits *rqb;
int pri;
int i;
rqb = &rq->rq_status;
for (i = 0; i < RQB_LEN; i++)
if (rqb->rqb_bits[i]) {
pri = RQB_FFS(rqb->rqb_bits[i]) + (i << RQB_L2BPW);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
CTR3(KTR_RUNQ, "runq_findbit: bits=%#x i=%d pri=%d",
rqb->rqb_bits[i], i, pri);
return (pri);
}
return (-1);
}
static __inline int
runq_findbit_from(struct runq *rq, u_char pri)
{
struct rqbits *rqb;
rqb_word_t mask;
int i;
/*
* Set the mask for the first word so we ignore priorities before 'pri'.
*/
mask = (rqb_word_t)-1 << (pri & (RQB_BPW - 1));
rqb = &rq->rq_status;
again:
for (i = RQB_WORD(pri); i < RQB_LEN; mask = -1, i++) {
mask = rqb->rqb_bits[i] & mask;
if (mask == 0)
continue;
pri = RQB_FFS(mask) + (i << RQB_L2BPW);
CTR3(KTR_RUNQ, "runq_findbit_from: bits=%#x i=%d pri=%d",
mask, i, pri);
return (pri);
}
if (pri == 0)
return (-1);
/*
* Wrap back around to the beginning of the list just once so we
* scan the whole thing.
*/
pri = 0;
goto again;
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
/*
* Set the status bit of the queue corresponding to priority level pri,
* indicating that it is non-empty.
*/
static __inline void
runq_setbit(struct runq *rq, int pri)
{
struct rqbits *rqb;
rqb = &rq->rq_status;
CTR4(KTR_RUNQ, "runq_setbit: bits=%#x %#x bit=%#x word=%d",
rqb->rqb_bits[RQB_WORD(pri)],
rqb->rqb_bits[RQB_WORD(pri)] | RQB_BIT(pri),
RQB_BIT(pri), RQB_WORD(pri));
rqb->rqb_bits[RQB_WORD(pri)] |= RQB_BIT(pri);
}
/*
* Add the thread to the queue specified by its priority, and set the
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* corresponding status bit.
*/
void
runq_add(struct runq *rq, struct thread *td, int flags)
{
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
struct rqhead *rqh;
int pri;
pri = td->td_priority / RQ_PPQ;
td->td_rqindex = pri;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
runq_setbit(rq, pri);
rqh = &rq->rq_queues[pri];
CTR4(KTR_RUNQ, "runq_add: td=%p pri=%d %d rqh=%p",
td, td->td_priority, pri, rqh);
if (flags & SRQ_PREEMPTED) {
TAILQ_INSERT_HEAD(rqh, td, td_runq);
} else {
TAILQ_INSERT_TAIL(rqh, td, td_runq);
}
}
void
runq_add_pri(struct runq *rq, struct thread *td, u_char pri, int flags)
{
struct rqhead *rqh;
KASSERT(pri < RQ_NQS, ("runq_add_pri: %d out of range", pri));
td->td_rqindex = pri;
runq_setbit(rq, pri);
rqh = &rq->rq_queues[pri];
CTR4(KTR_RUNQ, "runq_add_pri: td=%p pri=%d idx=%d rqh=%p",
td, td->td_priority, pri, rqh);
if (flags & SRQ_PREEMPTED) {
TAILQ_INSERT_HEAD(rqh, td, td_runq);
} else {
TAILQ_INSERT_TAIL(rqh, td, td_runq);
}
}
/*
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* Return true if there are runnable processes of any priority on the run
* queue, false otherwise. Has no side effects, does not modify the run
* queue structure.
*/
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
int
runq_check(struct runq *rq)
{
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
struct rqbits *rqb;
int i;
rqb = &rq->rq_status;
for (i = 0; i < RQB_LEN; i++)
if (rqb->rqb_bits[i]) {
CTR2(KTR_RUNQ, "runq_check: bits=%#x i=%d",
rqb->rqb_bits[i], i);
return (1);
}
CTR0(KTR_RUNQ, "runq_check: empty");
return (0);
}
/*
* Find the highest priority process on the run queue.
*/
struct thread *
runq_choose_fuzz(struct runq *rq, int fuzz)
{
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
struct rqhead *rqh;
struct thread *td;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
int pri;
while ((pri = runq_findbit(rq)) != -1) {
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
rqh = &rq->rq_queues[pri];
/* fuzz == 1 is normal.. 0 or less are ignored */
if (fuzz > 1) {
/*
* In the first couple of entries, check if
* there is one for our CPU as a preference.
*/
int count = fuzz;
int cpu = PCPU_GET(cpuid);
struct thread *td2;
td2 = td = TAILQ_FIRST(rqh);
while (count-- && td2) {
if (td2->td_lastcpu == cpu) {
td = td2;
break;
}
td2 = TAILQ_NEXT(td2, td_runq);
}
2005-12-28 17:13:31 +00:00
} else
td = TAILQ_FIRST(rqh);
KASSERT(td != NULL, ("runq_choose_fuzz: no proc on busy queue"));
CTR3(KTR_RUNQ,
"runq_choose_fuzz: pri=%d thread=%p rqh=%p", pri, td, rqh);
return (td);
}
CTR1(KTR_RUNQ, "runq_choose_fuzz: idleproc pri=%d", pri);
return (NULL);
}
/*
* Find the highest priority process on the run queue.
*/
struct thread *
runq_choose(struct runq *rq)
{
struct rqhead *rqh;
struct thread *td;
int pri;
while ((pri = runq_findbit(rq)) != -1) {
rqh = &rq->rq_queues[pri];
td = TAILQ_FIRST(rqh);
KASSERT(td != NULL, ("runq_choose: no thread on busy queue"));
CTR3(KTR_RUNQ,
"runq_choose: pri=%d thread=%p rqh=%p", pri, td, rqh);
return (td);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
}
CTR1(KTR_RUNQ, "runq_choose: idlethread pri=%d", pri);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
return (NULL);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
}
struct thread *
runq_choose_from(struct runq *rq, u_char idx)
{
struct rqhead *rqh;
struct thread *td;
int pri;
if ((pri = runq_findbit_from(rq, idx)) != -1) {
rqh = &rq->rq_queues[pri];
td = TAILQ_FIRST(rqh);
KASSERT(td != NULL, ("runq_choose: no thread on busy queue"));
CTR4(KTR_RUNQ,
"runq_choose_from: pri=%d thread=%p idx=%d rqh=%p",
pri, td, td->td_rqindex, rqh);
return (td);
}
CTR1(KTR_RUNQ, "runq_choose_from: idlethread pri=%d", pri);
return (NULL);
}
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
/*
* Remove the thread from the queue specified by its priority, and clear the
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
* corresponding status bit if the queue becomes empty.
* Caller must set state afterwards.
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
*/
void
runq_remove(struct runq *rq, struct thread *td)
{
runq_remove_idx(rq, td, NULL);
}
void
runq_remove_idx(struct runq *rq, struct thread *td, u_char *idx)
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
{
struct rqhead *rqh;
u_char pri;
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
KASSERT(td->td_flags & TDF_INMEM,
("runq_remove_idx: thread swapped out"));
pri = td->td_rqindex;
KASSERT(pri < RQ_NQS, ("runq_remove_idx: Invalid index %d\n", pri));
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
rqh = &rq->rq_queues[pri];
CTR4(KTR_RUNQ, "runq_remove_idx: td=%p, pri=%d %d rqh=%p",
td, td->td_priority, pri, rqh);
TAILQ_REMOVE(rqh, td, td_runq);
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
if (TAILQ_EMPTY(rqh)) {
CTR0(KTR_RUNQ, "runq_remove_idx: empty");
Implement a unified run queue and adjust priority levels accordingly. - All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
2001-02-12 00:20:08 +00:00
runq_clrbit(rq, pri);
if (idx != NULL && *idx == pri)
*idx = (pri + 1) % RQ_NQS;
}
}