freebsd-skq/usr.sbin/moused/moused.c

3306 lines
94 KiB
C
Raw Normal View History

/**
** Copyright (c) 1995 Michael Smith, All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer as
** the first lines of this file unmodified.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. All advertising materials mentioning features or use of this software
** must display the following acknowledgment:
** This product includes software developed by Michael Smith.
** 4. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY Michael Smith ``AS IS'' AND ANY
** EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
** PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL Michael Smith BE LIABLE FOR
** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
** CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
** SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
** BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
** WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
** OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
** EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
**/
/**
** MOUSED.C
**
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
** Mouse daemon : listens to a serial port, the bus mouse interface, or
2003-11-13 08:26:29 +00:00
** the PS/2 mouse port for mouse data stream, interprets data and passes
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
** ioctls off to the console driver.
**
** The mouse interface functions are derived closely from the mouse
** handler in the XFree86 X server. Many thanks to the XFree86 people
** for their great work!
2003-11-13 08:26:29 +00:00
**
**/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/consio.h>
#include <sys/linker.h>
#include <sys/module.h>
#include <sys/mouse.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/un.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
2005-08-24 17:27:06 +00:00
#include <libutil.h>
#include <limits.h>
#include <setjmp.h>
#include <signal.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#include <syslog.h>
#include <termios.h>
#include <unistd.h>
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define MAX_CLICKTHRESHOLD 2000 /* 2 seconds */
#define MAX_BUTTON2TIMEOUT 2000 /* 2 seconds */
#define DFLT_CLICKTHRESHOLD 500 /* 0.5 second */
#define DFLT_BUTTON2TIMEOUT 100 /* 0.1 second */
#define DFLT_SCROLLTHRESHOLD 3 /* 3 pixels */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* Abort 3-button emulation delay after this many movement events. */
#define BUTTON2_MAXMOVE 3
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define TRUE 1
#define FALSE 0
#define MOUSE_XAXIS (-1)
#define MOUSE_YAXIS (-2)
/* Logitech PS2++ protocol */
#define MOUSE_PS2PLUS_CHECKBITS(b) \
((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
#define MOUSE_PS2PLUS_PACKET_TYPE(b) \
(((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define ChordMiddle 0x0001
#define Emulate3Button 0x0002
#define ClearDTR 0x0004
#define ClearRTS 0x0008
#define NoPnP 0x0010
#define VirtualScroll 0x0020
#define HVirtualScroll 0x0040
2003-11-13 08:26:29 +00:00
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define ID_NONE 0
#define ID_PORT 1
#define ID_IF 2
#define ID_TYPE 4
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define ID_MODEL 8
#define ID_ALL (ID_PORT | ID_IF | ID_TYPE | ID_MODEL)
#define debug(fmt, args...) do { \
if (debug && nodaemon) \
warnx(fmt, ##args); \
} while (0)
#define logerr(e, fmt, args...) do { \
log_or_warn(LOG_DAEMON | LOG_ERR, errno, fmt, ##args); \
exit(e); \
} while (0)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define logerrx(e, fmt, args...) do { \
log_or_warn(LOG_DAEMON | LOG_ERR, 0, fmt, ##args); \
exit(e); \
} while (0)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define logwarn(fmt, args...) \
log_or_warn(LOG_DAEMON | LOG_WARNING, errno, fmt, ##args)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define logwarnx(fmt, args...) \
log_or_warn(LOG_DAEMON | LOG_WARNING, 0, fmt, ##args)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* structures */
/* symbol table entry */
typedef struct {
char *name;
int val;
int val2;
} symtab_t;
/* serial PnP ID string */
typedef struct {
int revision; /* PnP revision, 100 for 1.00 */
char *eisaid; /* EISA ID including mfr ID and product ID */
char *serial; /* serial No, optional */
char *class; /* device class, optional */
char *compat; /* list of compatible drivers, optional */
char *description; /* product description, optional */
int neisaid; /* length of the above fields... */
int nserial;
int nclass;
int ncompat;
int ndescription;
} pnpid_t;
/* global variables */
int debug = 0;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
int nodaemon = FALSE;
int background = FALSE;
int identify = ID_NONE;
int extioctl = FALSE;
char *pidfile = "/var/run/moused.pid";
2005-08-24 17:27:06 +00:00
struct pidfh *pfh;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#define SCROLL_NOTSCROLLING 0
#define SCROLL_PREPARE 1
#define SCROLL_SCROLLING 2
static int scroll_state;
static int scroll_movement;
static int hscroll_movement;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* local variables */
/* interface (the table must be ordered by MOUSE_IF_XXX in mouse.h) */
static symtab_t rifs[] = {
{ "serial", MOUSE_IF_SERIAL },
{ "bus", MOUSE_IF_BUS },
{ "inport", MOUSE_IF_INPORT },
{ "ps/2", MOUSE_IF_PS2 },
{ "sysmouse", MOUSE_IF_SYSMOUSE },
{ "usb", MOUSE_IF_USB },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
{ NULL, MOUSE_IF_UNKNOWN },
};
/* types (the table must be ordered by MOUSE_PROTO_XXX in mouse.h) */
static char *rnames[] = {
"microsoft",
"mousesystems",
"logitech",
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
"mmseries",
"mouseman",
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
"busmouse",
"inportmouse",
"ps/2",
"mmhitab",
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
"glidepoint",
"intellimouse",
"thinkingmouse",
"sysmouse",
"x10mouseremote",
"kidspad",
"versapad",
"jogdial",
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#if notyet
"mariqua",
#endif
2005-04-13 07:25:45 +00:00
"gtco_digipad",
NULL
};
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* models */
static symtab_t rmodels[] = {
{ "NetScroll", MOUSE_MODEL_NETSCROLL },
{ "NetMouse/NetScroll Optical", MOUSE_MODEL_NET },
{ "GlidePoint", MOUSE_MODEL_GLIDEPOINT },
{ "ThinkingMouse", MOUSE_MODEL_THINK },
{ "IntelliMouse", MOUSE_MODEL_INTELLI },
{ "EasyScroll/SmartScroll", MOUSE_MODEL_EASYSCROLL },
{ "MouseMan+", MOUSE_MODEL_MOUSEMANPLUS },
{ "Kidspad", MOUSE_MODEL_KIDSPAD },
{ "VersaPad", MOUSE_MODEL_VERSAPAD },
{ "IntelliMouse Explorer", MOUSE_MODEL_EXPLORER },
{ "4D Mouse", MOUSE_MODEL_4D },
{ "4D+ Mouse", MOUSE_MODEL_4DPLUS },
{ "Synaptics Touchpad", MOUSE_MODEL_SYNAPTICS },
{ "generic", MOUSE_MODEL_GENERIC },
2003-11-13 08:26:29 +00:00
{ NULL, MOUSE_MODEL_UNKNOWN },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
};
/* PnP EISA/product IDs */
static symtab_t pnpprod[] = {
/* Kensignton ThinkingMouse */
{ "KML0001", MOUSE_PROTO_THINK, MOUSE_MODEL_THINK },
/* MS IntelliMouse */
{ "MSH0001", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
/* MS IntelliMouse TrackBall */
{ "MSH0004", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
2000-03-15 16:46:12 +00:00
/* Tremon Wheel Mouse MUSD */
{ "HTK0001", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
1998-02-04 06:46:33 +00:00
/* Genius PnP Mouse */
{ "KYE0001", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
/* MouseSystems SmartScroll Mouse (OEM from Genius?) */
{ "KYE0002", MOUSE_PROTO_MS, MOUSE_MODEL_EASYSCROLL },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* Genius NetMouse */
{ "KYE0003", MOUSE_PROTO_INTELLI, MOUSE_MODEL_NET },
/* Genius Kidspad, Easypad and other tablets */
{ "KYE0005", MOUSE_PROTO_KIDSPAD, MOUSE_MODEL_KIDSPAD },
1998-02-04 06:46:33 +00:00
/* Genius EZScroll */
2003-11-13 08:26:29 +00:00
{ "KYEEZ00", MOUSE_PROTO_MS, MOUSE_MODEL_EASYSCROLL },
/* Logitech Cordless MouseMan Wheel */
{ "LGI8033", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
/* Logitech MouseMan (new 4 button model) */
{ "LGI800C", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* Logitech MouseMan+ */
{ "LGI8050", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
/* Logitech FirstMouse+ */
{ "LGI8051", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
/* Logitech serial */
{ "LGI8001", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
/* A4 Tech 4D/4D+ Mouse */
{ "A4W0005", MOUSE_PROTO_INTELLI, MOUSE_MODEL_4D },
/* 8D Scroll Mouse */
{ "PEC9802", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
/* Mitsumi Wireless Scroll Mouse */
{ "MTM6401", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS bus */
{ "PNP0F00", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
/* MS serial */
2003-11-13 08:26:29 +00:00
{ "PNP0F01", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS InPort */
2003-11-13 08:26:29 +00:00
{ "PNP0F02", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS PS/2 */
2003-11-13 08:26:29 +00:00
{ "PNP0F03", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/*
* EzScroll returns PNP0F04 in the compatible device field; but it
* doesn't look compatible... XXX
*/
2003-11-13 08:26:29 +00:00
/* MouseSystems */
{ "PNP0F04", MOUSE_PROTO_MSC, MOUSE_MODEL_GENERIC },
/* MouseSystems */
{ "PNP0F05", MOUSE_PROTO_MSC, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#if notyet
2003-11-13 08:26:29 +00:00
/* Genius Mouse */
{ "PNP0F06", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
2003-11-13 08:26:29 +00:00
/* Genius Mouse */
{ "PNP0F07", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#endif
/* Logitech serial */
{ "PNP0F08", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
/* MS BallPoint serial */
2003-11-13 08:26:29 +00:00
{ "PNP0F09", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS PnP serial */
2003-11-13 08:26:29 +00:00
{ "PNP0F0A", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS PnP BallPoint serial */
2003-11-13 08:26:29 +00:00
{ "PNP0F0B", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS serial comatible */
2003-11-13 08:26:29 +00:00
{ "PNP0F0C", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS InPort comatible */
2003-11-13 08:26:29 +00:00
{ "PNP0F0D", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS PS/2 comatible */
2003-11-13 08:26:29 +00:00
{ "PNP0F0E", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS BallPoint comatible */
2003-11-13 08:26:29 +00:00
{ "PNP0F0F", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#if notyet
/* TI QuickPort */
{ "PNP0F10", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#endif
/* MS bus comatible */
2003-11-13 08:26:29 +00:00
{ "PNP0F11", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* Logitech PS/2 */
{ "PNP0F12", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
/* PS/2 */
{ "PNP0F13", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
#if notyet
/* MS Kids Mouse */
{ "PNP0F14", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#endif
2003-11-13 08:26:29 +00:00
/* Logitech bus */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
{ "PNP0F15", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
#if notyet
/* Logitech SWIFT */
{ "PNP0F16", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#endif
/* Logitech serial compat */
{ "PNP0F17", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
/* Logitech bus compatible */
{ "PNP0F18", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
/* Logitech PS/2 compatible */
{ "PNP0F19", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
#if notyet
/* Logitech SWIFT compatible */
{ "PNP0F1A", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* HP Omnibook */
{ "PNP0F1B", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* Compaq LTE TrackBall PS/2 */
{ "PNP0F1C", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* Compaq LTE TrackBall serial */
{ "PNP0F1D", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MS Kidts Trackball */
{ "PNP0F1E", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#endif
/* Interlink VersaPad */
{ "LNK0001", MOUSE_PROTO_VERSAPAD, MOUSE_MODEL_VERSAPAD },
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
{ NULL, MOUSE_PROTO_UNKNOWN, MOUSE_MODEL_GENERIC },
};
/* the table must be ordered by MOUSE_PROTO_XXX in mouse.h */
static unsigned short rodentcflags[] =
{
(CS7 | CREAD | CLOCAL | HUPCL), /* MicroSoft */
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* MouseSystems */
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* Logitech */
(CS8 | PARENB | PARODD | CREAD | CLOCAL | HUPCL), /* MMSeries */
(CS7 | CREAD | CLOCAL | HUPCL), /* MouseMan */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
0, /* Bus */
0, /* InPort */
0, /* PS/2 */
(CS8 | CREAD | CLOCAL | HUPCL), /* MM HitTablet */
(CS7 | CREAD | CLOCAL | HUPCL), /* GlidePoint */
(CS7 | CREAD | CLOCAL | HUPCL), /* IntelliMouse */
(CS7 | CREAD | CLOCAL | HUPCL), /* Thinking Mouse */
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* sysmouse */
(CS7 | CREAD | CLOCAL | HUPCL), /* X10 MouseRemote */
(CS8 | PARENB | PARODD | CREAD | CLOCAL | HUPCL), /* kidspad etc. */
(CS8 | CREAD | CLOCAL | HUPCL), /* VersaPad */
0, /* JogDial */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#if notyet
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* Mariqua */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#endif
2005-04-13 07:25:45 +00:00
(CS8 | CREAD | HUPCL ), /* GTCO Digi-Pad */
};
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static struct rodentparam {
int flags;
char *portname; /* /dev/XXX */
int rtype; /* MOUSE_PROTO_XXX */
int level; /* operation level: 0 or greater */
int baudrate;
int rate; /* report rate */
int resolution; /* MOUSE_RES_XXX or a positive number */
int zmap[4]; /* MOUSE_{X|Y}AXIS or a button number */
int wmode; /* wheel mode button number */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
int mfd; /* mouse file descriptor */
int cfd; /* /dev/consolectl file descriptor */
int mremsfd; /* mouse remote server file descriptor */
int mremcfd; /* mouse remote client file descriptor */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
long clickthreshold; /* double click speed in msec */
long button2timeout; /* 3 button emulation timeout */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
mousehw_t hw; /* mouse device hardware information */
mousemode_t mode; /* protocol information */
float accelx; /* Acceleration in the X axis */
float accely; /* Acceleration in the Y axis */
int scrollthreshold; /* Movement distance before virtual scrolling */
2003-11-13 08:26:29 +00:00
} rodent = {
.flags = 0,
.portname = NULL,
.rtype = MOUSE_PROTO_UNKNOWN,
.level = -1,
.baudrate = 1200,
.rate = 0,
.resolution = MOUSE_RES_UNKNOWN,
.zmap = { 0, 0, 0, 0 },
.wmode = 0,
.mfd = -1,
.cfd = -1,
.mremsfd = -1,
.mremcfd = -1,
.clickthreshold = DFLT_CLICKTHRESHOLD,
.button2timeout = DFLT_BUTTON2TIMEOUT,
.accelx = 1.0,
.accely = 1.0,
.scrollthreshold = DFLT_SCROLLTHRESHOLD,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
};
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* button status */
struct button_state {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
int count; /* 0: up, 1: single click, 2: double click,... */
struct timeval tv; /* timestamp on the last button event */
};
static struct button_state bstate[MOUSE_MAXBUTTON]; /* button state */
static struct button_state *mstate[MOUSE_MAXBUTTON];/* mapped button st.*/
static struct button_state zstate[4]; /* Z/W axis state */
/* state machine for 3 button emulation */
#define S0 0 /* start */
#define S1 1 /* button 1 delayed down */
#define S2 2 /* button 3 delayed down */
#define S3 3 /* both buttons down -> button 2 down */
#define S4 4 /* button 1 delayed up */
#define S5 5 /* button 1 down */
#define S6 6 /* button 3 down */
#define S7 7 /* both buttons down */
#define S8 8 /* button 3 delayed up */
#define S9 9 /* button 1 or 3 up after S3 */
#define A(b1, b3) (((b1) ? 2 : 0) | ((b3) ? 1 : 0))
#define A_TIMEOUT 4
#define S_DELAYED(st) (states[st].s[A_TIMEOUT] != (st))
static struct {
int s[A_TIMEOUT + 1];
int buttons;
int mask;
int timeout;
} states[10] = {
/* S0 */
{ { S0, S2, S1, S3, S0 }, 0, ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN), FALSE },
/* S1 */
{ { S4, S2, S1, S3, S5 }, 0, ~MOUSE_BUTTON1DOWN, FALSE },
/* S2 */
{ { S8, S2, S1, S3, S6 }, 0, ~MOUSE_BUTTON3DOWN, FALSE },
/* S3 */
{ { S0, S9, S9, S3, S3 }, MOUSE_BUTTON2DOWN, ~0, FALSE },
/* S4 */
{ { S0, S2, S1, S3, S0 }, MOUSE_BUTTON1DOWN, ~0, TRUE },
/* S5 */
{ { S0, S2, S5, S7, S5 }, MOUSE_BUTTON1DOWN, ~0, FALSE },
/* S6 */
{ { S0, S6, S1, S7, S6 }, MOUSE_BUTTON3DOWN, ~0, FALSE },
/* S7 */
{ { S0, S6, S5, S7, S7 }, MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, ~0, FALSE },
/* S8 */
{ { S0, S2, S1, S3, S0 }, MOUSE_BUTTON3DOWN, ~0, TRUE },
/* S9 */
{ { S0, S9, S9, S3, S9 }, 0, ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN), FALSE },
};
static int mouse_button_state;
static struct timeval mouse_button_state_tv;
static int mouse_move_delayed;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static jmp_buf env;
static int drift_distance = 4; /* max steps X+Y */
static int drift_time = 500; /* in 0.5 sec */
static struct timeval drift_time_tv;
static struct timeval drift_2time_tv; /* 2*drift_time */
static int drift_after = 4000; /* 4 sec */
static struct timeval drift_after_tv;
static int drift_terminate = FALSE;
static struct timeval drift_current_tv;
static struct timeval drift_tmp;
static struct timeval drift_last_activity = {0,0};
static struct drift_xy {
int x; int y; } drift_last = {0,0}; /* steps in last drift_time */
static struct timeval drift_since = {0,0};
static struct drift_xy drift_previous={0,0}; /* steps in previous drift_time */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* function prototypes */
static void moused(void);
static void hup(int sig);
static void cleanup(int sig);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static void usage(void);
static void log_or_warn(int log_pri, int errnum, const char *fmt, ...)
__printflike(3, 4);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static int r_identify(void);
static char *r_if(int type);
static char *r_name(int type);
static char *r_model(int model);
static void r_init(void);
static int r_protocol(u_char b, mousestatus_t *act);
static int r_statetrans(mousestatus_t *a1, mousestatus_t *a2, int trans);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static int r_installmap(char *arg);
static void r_map(mousestatus_t *act1, mousestatus_t *act2);
static void r_timestamp(mousestatus_t *act);
static int r_timeout(void);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static void r_click(mousestatus_t *act);
static void setmousespeed(int old, int new, unsigned cflag);
static int pnpwakeup1(void);
static int pnpwakeup2(void);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static int pnpgets(char *buf);
static int pnpparse(pnpid_t *id, char *buf, int len);
static symtab_t *pnpproto(pnpid_t *id);
static symtab_t *gettoken(symtab_t *tab, char *s, int len);
static char *gettokenname(symtab_t *tab, int val);
static void mremote_serversetup();
static void mremote_clientchg(int add);
static int kidspad(u_char rxc, mousestatus_t *act);
2005-04-13 07:25:45 +00:00
static int gtco_digipad(u_char, mousestatus_t *);
static int usbmodule(void);
int
main(int argc, char *argv[])
{
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
int c;
int i;
int j;
int retry;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
for (i = 0; i < MOUSE_MAXBUTTON; ++i)
mstate[i] = &bstate[i];
while ((c = getopt(argc, argv, "3C:DE:F:HI:PRS:T:VU:a:cdfhi:l:m:p:r:st:w:z:")) != -1)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
switch(c) {
case '3':
rodent.flags |= Emulate3Button;
break;
case 'E':
rodent.button2timeout = atoi(optarg);
2003-11-13 08:26:29 +00:00
if ((rodent.button2timeout < 0) ||
(rodent.button2timeout > MAX_BUTTON2TIMEOUT)) {
warnx("invalid argument `%s'", optarg);
usage();
}
break;
case 'a':
i = sscanf(optarg, "%f,%f", &rodent.accelx, &rodent.accely);
if (i == 0) {
warnx("invalid acceleration argument '%s'", optarg);
usage();
}
2003-11-13 08:26:29 +00:00
if (i == 1)
rodent.accely = rodent.accelx;
2003-11-13 08:26:29 +00:00
break;
2003-11-13 08:26:29 +00:00
case 'c':
rodent.flags |= ChordMiddle;
break;
case 'd':
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
++debug;
break;
case 'f':
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
nodaemon = TRUE;
break;
case 'i':
if (strcmp(optarg, "all") == 0)
2003-11-13 08:26:29 +00:00
identify = ID_ALL;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "port") == 0)
2003-11-13 08:26:29 +00:00
identify = ID_PORT;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "if") == 0)
2003-11-13 08:26:29 +00:00
identify = ID_IF;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "type") == 0)
2003-11-13 08:26:29 +00:00
identify = ID_TYPE;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "model") == 0)
2003-11-13 08:26:29 +00:00
identify = ID_MODEL;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else {
2003-11-13 08:26:29 +00:00
warnx("invalid argument `%s'", optarg);
usage();
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
nodaemon = TRUE;
break;
case 'l':
rodent.level = atoi(optarg);
if ((rodent.level < 0) || (rodent.level > 4)) {
2003-11-13 08:26:29 +00:00
warnx("invalid argument `%s'", optarg);
usage();
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
break;
case 'm':
if (!r_installmap(optarg)) {
2003-11-13 08:26:29 +00:00
warnx("invalid argument `%s'", optarg);
usage();
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
break;
case 'p':
rodent.portname = optarg;
break;
case 'r':
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (strcmp(optarg, "high") == 0)
2003-11-13 08:26:29 +00:00
rodent.resolution = MOUSE_RES_HIGH;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "medium-high") == 0)
2003-11-13 08:26:29 +00:00
rodent.resolution = MOUSE_RES_HIGH;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "medium-low") == 0)
2003-11-13 08:26:29 +00:00
rodent.resolution = MOUSE_RES_MEDIUMLOW;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "low") == 0)
2003-11-13 08:26:29 +00:00
rodent.resolution = MOUSE_RES_LOW;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "default") == 0)
2003-11-13 08:26:29 +00:00
rodent.resolution = MOUSE_RES_DEFAULT;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else {
2003-11-13 08:26:29 +00:00
rodent.resolution = atoi(optarg);
if (rodent.resolution <= 0) {
warnx("invalid argument `%s'", optarg);
usage();
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
break;
case 's':
rodent.baudrate = 9600;
break;
case 'w':
i = atoi(optarg);
if ((i <= 0) || (i > MOUSE_MAXBUTTON)) {
warnx("invalid argument `%s'", optarg);
usage();
}
rodent.wmode = 1 << (i - 1);
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case 'z':
if (strcmp(optarg, "x") == 0)
rodent.zmap[0] = MOUSE_XAXIS;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (strcmp(optarg, "y") == 0)
rodent.zmap[0] = MOUSE_YAXIS;
2003-11-13 08:26:29 +00:00
else {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
i = atoi(optarg);
2003-11-13 08:26:29 +00:00
/*
* Use button i for negative Z axis movement and
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* button (i + 1) for positive Z axis movement.
*/
if ((i <= 0) || (i > MOUSE_MAXBUTTON - 1)) {
2003-11-13 08:26:29 +00:00
warnx("invalid argument `%s'", optarg);
usage();
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
rodent.zmap[0] = i;
rodent.zmap[1] = i + 1;
debug("optind: %d, optarg: '%s'", optind, optarg);
for (j = 1; j < 4; ++j) {
if ((optind >= argc) || !isdigit(*argv[optind]))
break;
i = atoi(argv[optind]);
if ((i <= 0) || (i > MOUSE_MAXBUTTON - 1)) {
warnx("invalid argument `%s'", argv[optind]);
usage();
}
rodent.zmap[j] = i;
++optind;
}
if ((rodent.zmap[2] != 0) && (rodent.zmap[3] == 0))
rodent.zmap[3] = rodent.zmap[2] + 1;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
break;
case 'C':
rodent.clickthreshold = atoi(optarg);
2003-11-13 08:26:29 +00:00
if ((rodent.clickthreshold < 0) ||
(rodent.clickthreshold > MAX_CLICKTHRESHOLD)) {
warnx("invalid argument `%s'", optarg);
usage();
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
break;
case 'D':
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
rodent.flags |= ClearDTR;
break;
case 'F':
rodent.rate = atoi(optarg);
if (rodent.rate <= 0) {
2003-11-13 08:26:29 +00:00
warnx("invalid argument `%s'", optarg);
usage();
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
break;
case 'H':
rodent.flags |= HVirtualScroll;
break;
case 'I':
pidfile = optarg;
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case 'P':
rodent.flags |= NoPnP;
break;
case 'R':
rodent.flags |= ClearRTS;
break;
case 'S':
rodent.baudrate = atoi(optarg);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.baudrate <= 0) {
2003-11-13 08:26:29 +00:00
warnx("invalid argument `%s'", optarg);
usage();
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
debug("rodent baudrate %d", rodent.baudrate);
break;
case 'T':
drift_terminate = TRUE;
sscanf(optarg, "%d,%d,%d", &drift_distance, &drift_time,
&drift_after);
if (drift_distance <= 0 || drift_time <= 0 || drift_after <= 0) {
warnx("invalid argument `%s'", optarg);
usage();
}
debug("terminate drift: distance %d, time %d, after %d",
drift_distance, drift_time, drift_after);
drift_time_tv.tv_sec = drift_time/1000;
drift_time_tv.tv_usec = (drift_time%1000)*1000;
drift_2time_tv.tv_sec = (drift_time*=2)/1000;
drift_2time_tv.tv_usec = (drift_time%1000)*1000;
drift_after_tv.tv_sec = drift_after/1000;
drift_after_tv.tv_usec = (drift_after%1000)*1000;
break;
case 't':
if (strcmp(optarg, "auto") == 0) {
rodent.rtype = MOUSE_PROTO_UNKNOWN;
rodent.flags &= ~NoPnP;
rodent.level = -1;
break;
}
for (i = 0; rnames[i]; i++)
if (strcmp(optarg, rnames[i]) == 0) {
rodent.rtype = i;
rodent.flags |= NoPnP;
rodent.level = (i == MOUSE_PROTO_SYSMOUSE) ? 1 : 0;
break;
}
if (rnames[i])
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
warnx("no such mouse type `%s'", optarg);
usage();
case 'V':
rodent.flags |= VirtualScroll;
break;
case 'U':
rodent.scrollthreshold = atoi(optarg);
if (rodent.scrollthreshold < 0) {
warnx("invalid argument `%s'", optarg);
usage();
}
break;
case 'h':
case '?':
default:
usage();
}
/* fix Z axis mapping */
for (i = 0; i < 4; ++i) {
if (rodent.zmap[i] > 0) {
for (j = 0; j < MOUSE_MAXBUTTON; ++j) {
if (mstate[j] == &bstate[rodent.zmap[i] - 1])
mstate[j] = &zstate[i];
}
rodent.zmap[i] = 1 << (rodent.zmap[i] - 1);
}
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* the default port name */
switch(rodent.rtype) {
case MOUSE_PROTO_INPORT:
2003-11-13 08:26:29 +00:00
/* INPORT and BUS are the same... */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
rodent.rtype = MOUSE_PROTO_BUS;
/* FALLTHROUGH */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_BUS:
if (!rodent.portname)
rodent.portname = "/dev/mse0";
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_PS2:
if (!rodent.portname)
rodent.portname = "/dev/psm0";
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
default:
if (rodent.portname)
break;
warnx("no port name specified");
usage();
}
retry = 1;
if (strncmp(rodent.portname, "/dev/ums", 8) == 0) {
if (usbmodule() != 0)
retry = 5;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
for (;;) {
if (setjmp(env) == 0) {
signal(SIGHUP, hup);
signal(SIGINT , cleanup);
signal(SIGQUIT, cleanup);
signal(SIGTERM, cleanup);
for (i = 0; i < retry; ++i) {
if (i > 0)
sleep(2);
rodent.mfd = open(rodent.portname, O_RDWR | O_NONBLOCK);
if (rodent.mfd != -1 || errno != ENOENT)
break;
}
if (rodent.mfd == -1)
2003-11-13 08:26:29 +00:00
logerr(1, "unable to open %s", rodent.portname);
if (r_identify() == MOUSE_PROTO_UNKNOWN) {
logwarnx("cannot determine mouse type on %s", rodent.portname);
close(rodent.mfd);
rodent.mfd = -1;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* print some information */
2003-11-13 08:26:29 +00:00
if (identify != ID_NONE) {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (identify == ID_ALL)
2003-11-13 08:26:29 +00:00
printf("%s %s %s %s\n",
rodent.portname, r_if(rodent.hw.iftype),
r_name(rodent.rtype), r_model(rodent.hw.model));
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (identify & ID_PORT)
printf("%s\n", rodent.portname);
else if (identify & ID_IF)
printf("%s\n", r_if(rodent.hw.iftype));
else if (identify & ID_TYPE)
printf("%s\n", r_name(rodent.rtype));
else if (identify & ID_MODEL)
printf("%s\n", r_model(rodent.hw.model));
exit(0);
} else {
2003-11-13 08:26:29 +00:00
debug("port: %s interface: %s type: %s model: %s",
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
rodent.portname, r_if(rodent.hw.iftype),
r_name(rodent.rtype), r_model(rodent.hw.model));
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.mfd == -1) {
2003-11-13 08:26:29 +00:00
/*
* We cannot continue because of error. Exit if the
* program has not become a daemon. Otherwise, block
* until the the user corrects the problem and issues SIGHUP.
*/
if (!background)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
exit(1);
2003-11-13 08:26:29 +00:00
sigpause(0);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
2003-11-13 08:26:29 +00:00
r_init(); /* call init function */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
moused();
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.mfd != -1)
close(rodent.mfd);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.cfd != -1)
close(rodent.cfd);
rodent.mfd = rodent.cfd = -1;
}
/* NOT REACHED */
exit(0);
}
static int
usbmodule(void)
{
struct kld_file_stat fstat;
struct module_stat mstat;
int fileid, modid;
int loaded;
for (loaded = 0, fileid = kldnext(0); !loaded && fileid > 0;
fileid = kldnext(fileid)) {
fstat.version = sizeof(fstat);
if (kldstat(fileid, &fstat) < 0)
continue;
if (strncmp(fstat.name, "uhub/ums", 8) == 0) {
loaded = 1;
break;
}
for (modid = kldfirstmod(fileid); modid > 0;
modid = modfnext(modid)) {
mstat.version = sizeof(mstat);
if (modstat(modid, &mstat) < 0)
continue;
if (strncmp(mstat.name, "uhub/ums", 8) == 0) {
loaded = 1;
break;
}
}
}
if (!loaded) {
if (kldload("ums") != -1)
return 1;
if (errno != EEXIST)
logerr(1, "unable to load USB mouse driver");
}
return 0;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static void
moused(void)
{
struct mouse_info mouse;
mousestatus_t action0; /* original mouse action */
mousestatus_t action; /* interrim buffer */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
mousestatus_t action2; /* mapped action */
struct timeval timeout;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
fd_set fds;
u_char b;
2005-08-24 17:27:06 +00:00
pid_t mpid;
int flags;
int c;
int i;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if ((rodent.cfd = open("/dev/consolectl", O_RDWR, 0)) == -1)
logerr(1, "cannot open /dev/consolectl");
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (!nodaemon && !background) {
pfh = pidfile_open(pidfile, 0600, &mpid);
2005-08-24 17:27:06 +00:00
if (pfh == NULL) {
if (errno == EEXIST)
logerrx(1, "moused already running, pid: %d", mpid);
logwarn("cannot open pid file");
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (daemon(0, 0)) {
2005-08-24 17:27:06 +00:00
int saved_errno = errno;
pidfile_remove(pfh);
errno = saved_errno;
logerr(1, "failed to become a daemon");
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
} else {
background = TRUE;
2005-08-24 17:27:06 +00:00
pidfile_write(pfh);
}
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* clear mouse data */
bzero(&action0, sizeof(action0));
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
bzero(&action, sizeof(action));
bzero(&action2, sizeof(action2));
bzero(&mouse, sizeof(mouse));
mouse_button_state = S0;
gettimeofday(&mouse_button_state_tv, NULL);
mouse_move_delayed = 0;
for (i = 0; i < MOUSE_MAXBUTTON; ++i) {
bstate[i].count = 0;
bstate[i].tv = mouse_button_state_tv;
}
for (i = 0; i < sizeof(zstate)/sizeof(zstate[0]); ++i) {
zstate[i].count = 0;
zstate[i].tv = mouse_button_state_tv;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* choose which ioctl command to use */
mouse.operation = MOUSE_MOTION_EVENT;
extioctl = (ioctl(rodent.cfd, CONS_MOUSECTL, &mouse) == 0);
/* process mouse data */
timeout.tv_sec = 0;
timeout.tv_usec = 20000; /* 20 msec */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
for (;;) {
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
if (rodent.mremsfd >= 0)
FD_SET(rodent.mremsfd, &fds);
if (rodent.mremcfd >= 0)
FD_SET(rodent.mremcfd, &fds);
c = select(FD_SETSIZE, &fds, NULL, NULL,
(rodent.flags & Emulate3Button) ? &timeout : NULL);
if (c < 0) { /* error */
logwarn("failed to read from mouse");
continue;
} else if (c == 0) { /* timeout */
/* assert(rodent.flags & Emulate3Button) */
action0.button = action0.obutton;
action0.dx = action0.dy = action0.dz = 0;
action0.flags = flags = 0;
if (r_timeout() && r_statetrans(&action0, &action, A_TIMEOUT)) {
if (debug > 2)
debug("flags:%08x buttons:%08x obuttons:%08x",
action.flags, action.button, action.obutton);
} else {
action0.obutton = action0.button;
continue;
}
} else {
/* MouseRemote client connect/disconnect */
if ((rodent.mremsfd >= 0) && FD_ISSET(rodent.mremsfd, &fds)) {
mremote_clientchg(TRUE);
continue;
}
if ((rodent.mremcfd >= 0) && FD_ISSET(rodent.mremcfd, &fds)) {
mremote_clientchg(FALSE);
continue;
}
/* mouse movement */
if (read(rodent.mfd, &b, 1) == -1) {
if (errno == EWOULDBLOCK)
continue;
else
return;
}
if ((flags = r_protocol(b, &action0)) == 0)
continue;
if ((rodent.flags & VirtualScroll) || (rodent.flags & HVirtualScroll)) {
/* Allow middle button drags to scroll up and down */
if (action0.button == MOUSE_BUTTON2DOWN) {
if (scroll_state == SCROLL_NOTSCROLLING) {
scroll_state = SCROLL_PREPARE;
debug("PREPARING TO SCROLL");
}
debug("[BUTTON2] flags:%08x buttons:%08x obuttons:%08x",
action.flags, action.button, action.obutton);
} else {
debug("[NOTBUTTON2] flags:%08x buttons:%08x obuttons:%08x",
action.flags, action.button, action.obutton);
/* This isn't a middle button down... move along... */
if (scroll_state == SCROLL_SCROLLING) {
/*
* We were scrolling, someone let go of button 2.
* Now turn autoscroll off.
*/
scroll_state = SCROLL_NOTSCROLLING;
debug("DONE WITH SCROLLING / %d", scroll_state);
} else if (scroll_state == SCROLL_PREPARE) {
mousestatus_t newaction = action0;
/* We were preparing to scroll, but we never moved... */
r_timestamp(&action0);
r_statetrans(&action0, &newaction,
A(newaction.button & MOUSE_BUTTON1DOWN,
action0.button & MOUSE_BUTTON3DOWN));
/* Send middle down */
newaction.button = MOUSE_BUTTON2DOWN;
r_click(&newaction);
/* Send middle up */
r_timestamp(&newaction);
newaction.obutton = newaction.button;
newaction.button = action0.button;
r_click(&newaction);
}
}
}
r_timestamp(&action0);
2003-11-13 08:26:29 +00:00
r_statetrans(&action0, &action,
A(action0.button & MOUSE_BUTTON1DOWN,
action0.button & MOUSE_BUTTON3DOWN));
debug("flags:%08x buttons:%08x obuttons:%08x", action.flags,
action.button, action.obutton);
}
action0.obutton = action0.button;
flags &= MOUSE_POSCHANGED;
flags |= action.obutton ^ action.button;
action.flags = flags;
if (flags) { /* handler detected action */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
r_map(&action, &action2);
debug("activity : buttons 0x%08x dx %d dy %d dz %d",
action2.button, action2.dx, action2.dy, action2.dz);
if ((rodent.flags & VirtualScroll) || (rodent.flags & HVirtualScroll)) {
/*
* If *only* the middle button is pressed AND we are moving
* the stick/trackpoint/nipple, scroll!
*/
if (scroll_state == SCROLL_PREPARE) {
/* Ok, Set we're really scrolling now.... */
if (action2.dy || action2.dx)
scroll_state = SCROLL_SCROLLING;
}
if (scroll_state == SCROLL_SCROLLING) {
if (rodent.flags & VirtualScroll) {
scroll_movement += action2.dy;
debug("SCROLL: %d", scroll_movement);
if (scroll_movement < -rodent.scrollthreshold) {
/* Scroll down */
action2.dz = -1;
scroll_movement = 0;
}
else if (scroll_movement > rodent.scrollthreshold) {
/* Scroll up */
action2.dz = 1;
scroll_movement = 0;
}
}
if (rodent.flags & HVirtualScroll) {
hscroll_movement += action2.dx;
debug("HORIZONTAL SCROLL: %d", hscroll_movement);
if (hscroll_movement < -rodent.scrollthreshold) {
action2.dz = -2;
hscroll_movement = 0;
}
else if (hscroll_movement > rodent.scrollthreshold) {
action2.dz = 2;
hscroll_movement = 0;
}
}
/* Don't move while scrolling */
action2.dx = action2.dy = 0;
}
}
if (drift_terminate) {
if (flags != MOUSE_POSCHANGED || action.dz || action2.dz)
drift_last_activity = drift_current_tv;
else {
/* X or/and Y movement only - possibly drift */
timersub(&drift_current_tv,&drift_last_activity,&drift_tmp);
if (timercmp(&drift_tmp, &drift_after_tv, >)) {
timersub(&drift_current_tv, &drift_since, &drift_tmp);
if (timercmp(&drift_tmp, &drift_time_tv, <)) {
drift_last.x += action2.dx;
drift_last.y += action2.dy;
} else {
/* discard old accumulated steps (drift) */
if (timercmp(&drift_tmp, &drift_2time_tv, >))
drift_previous.x = drift_previous.y = 0;
else
drift_previous = drift_last;
drift_last.x = action2.dx;
drift_last.y = action2.dy;
drift_since = drift_current_tv;
}
if (abs(drift_last.x) + abs(drift_last.y)
> drift_distance) {
/* real movement, pass all accumulated steps */
action2.dx = drift_previous.x + drift_last.x;
action2.dy = drift_previous.y + drift_last.y;
/* and reset accumulators */
timerclear(&drift_since);
drift_last.x = drift_last.y = 0;
/* drift_previous will be cleared at next movement*/
drift_last_activity = drift_current_tv;
} else {
continue; /* don't pass current movement to
* console driver */
}
}
}
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (extioctl) {
/* Defer clicks until we aren't VirtualScroll'ing. */
if (scroll_state == SCROLL_NOTSCROLLING)
r_click(&action2);
2003-11-13 08:26:29 +00:00
if (action2.flags & MOUSE_POSCHANGED) {
mouse.operation = MOUSE_MOTION_EVENT;
mouse.u.data.buttons = action2.button;
mouse.u.data.x = action2.dx * rodent.accelx;
mouse.u.data.y = action2.dy * rodent.accely;
mouse.u.data.z = action2.dz;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (debug < 2)
2003-11-13 08:26:29 +00:00
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
} else {
2003-11-13 08:26:29 +00:00
mouse.operation = MOUSE_ACTION;
mouse.u.data.buttons = action2.button;
mouse.u.data.x = action2.dx * rodent.accelx;
mouse.u.data.y = action2.dy * rodent.accely;
mouse.u.data.z = action2.dz;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (debug < 2)
2003-11-13 08:26:29 +00:00
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
/*
* If the Z axis movement is mapped to an imaginary physical
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* button, we need to cook up a corresponding button `up' event
* after sending a button `down' event.
*/
2003-11-13 08:26:29 +00:00
if ((rodent.zmap[0] > 0) && (action.dz != 0)) {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
action.obutton = action.button;
action.dx = action.dy = action.dz = 0;
2003-11-13 08:26:29 +00:00
r_map(&action, &action2);
debug("activity : buttons 0x%08x dx %d dy %d dz %d",
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
action2.button, action2.dx, action2.dy, action2.dz);
2003-11-13 08:26:29 +00:00
if (extioctl) {
r_click(&action2);
} else {
mouse.operation = MOUSE_ACTION;
mouse.u.data.buttons = action2.button;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
mouse.u.data.x = mouse.u.data.y = mouse.u.data.z = 0;
if (debug < 2)
2003-11-13 08:26:29 +00:00
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
}
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* NOT REACHED */
2003-11-13 08:26:29 +00:00
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static void
hup(int sig)
{
longjmp(env, 1);
}
2003-11-13 08:26:29 +00:00
static void
cleanup(int sig)
{
if (rodent.rtype == MOUSE_PROTO_X10MOUSEREM)
unlink(_PATH_MOUSEREMOTE);
exit(0);
}
/**
** usage
**
** Complain, and free the CPU for more worthy tasks
**/
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static void
usage(void)
{
fprintf(stderr, "%s\n%s\n%s\n%s\n%s\n",
"usage: moused [-DRcdfs] [-I file] [-F rate] [-r resolution] [-S baudrate]",
" [-VH [-U threshold]] [-a X[,Y]] [-C threshold] [-m N=M] [-w N]",
" [-z N] [-t <mousetype>] [-l level] [-3 [-E timeout]]",
" [-T distance[,time[,after]]] -p <port>",
" moused [-d] -i <port|if|type|model|all> -p <port>");
exit(1);
}
/*
* Output an error message to syslog or stderr as appropriate. If
* `errnum' is non-zero, append its string form to the message.
*/
static void
log_or_warn(int log_pri, int errnum, const char *fmt, ...)
{
va_list ap;
char buf[256];
va_start(ap, fmt);
vsnprintf(buf, sizeof(buf), fmt, ap);
va_end(ap);
if (errnum) {
strlcat(buf, ": ", sizeof(buf));
strlcat(buf, strerror(errnum), sizeof(buf));
}
if (background)
syslog(log_pri, "%s", buf);
else
warnx("%s", buf);
}
/**
** Mouse interface code, courtesy of XFree86 3.1.2.
**
** Note: Various bits have been trimmed, and in my shortsighted enthusiasm
** to clean, reformat and rationalise naming, it's quite possible that
** some things in here have been broken.
**
** I hope not 8)
**
** The following code is derived from a module marked :
**/
/* $XConsortium: xf86_Mouse.c,v 1.2 94/10/12 20:33:21 kaleb Exp $ */
/* $XFree86: xc/programs/Xserver/hw/xfree86/common/xf86_Mouse.c,v 3.2 1995/01/28
17:03:40 dawes Exp $ */
/*
*
* Copyright 1990,91 by Thomas Roell, Dinkelscherben, Germany.
* Copyright 1993 by David Dawes <dawes@physics.su.oz.au>
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation, and that the names of Thomas Roell and David Dawes not be
* used in advertising or publicity pertaining to distribution of the
* software without specific, written prior permission. Thomas Roell
* and David Dawes makes no representations about the suitability of this
* software for any purpose. It is provided "as is" without express or
* implied warranty.
*
* THOMAS ROELL AND DAVID DAWES DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
* SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS, IN NO EVENT SHALL THOMAS ROELL OR DAVID DAWES BE LIABLE FOR ANY
* SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
* CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/**
** GlidePoint support from XFree86 3.2.
** Derived from the module:
**/
/* $XFree86: xc/programs/Xserver/hw/xfree86/common/xf86_Mouse.c,v 3.19 1996/10/16 14:40:51 dawes Exp $ */
/* $XConsortium: xf86_Mouse.c /main/10 1996/01/30 15:16:12 kaleb $ */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* the following table must be ordered by MOUSE_PROTO_XXX in mouse.h */
static unsigned char proto[][7] = {
/* hd_mask hd_id dp_mask dp_id bytes b4_mask b4_id */
2003-11-13 08:26:29 +00:00
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x23, 0x00 }, /* MicroSoft */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* MouseSystems */
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* Logitech */
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* MMSeries */
2003-11-13 08:26:29 +00:00
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* MouseMan */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* Bus */
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* InPort */
{ 0xc0, 0x00, 0x00, 0x00, 3, 0x00, 0xff }, /* PS/2 mouse */
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* MM HitTablet */
2003-11-13 08:26:29 +00:00
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* GlidePoint */
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x3f, 0x00 }, /* IntelliMouse */
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* ThinkingMouse */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* sysmouse */
2003-11-13 08:26:29 +00:00
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x23, 0x00 }, /* X10 MouseRem */
{ 0x80, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* KIDSPAD */
{ 0xc3, 0xc0, 0x00, 0x00, 6, 0x00, 0xff }, /* VersaPad */
{ 0x00, 0x00, 0x00, 0x00, 1, 0x00, 0xff }, /* JogDial */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#if notyet
{ 0xf8, 0x80, 0x00, 0x00, 5, ~0x2f, 0x10 }, /* Mariqua */
#endif
};
static unsigned char cur_proto[7];
static int
r_identify(void)
{
char pnpbuf[256]; /* PnP identifier string may be up to 256 bytes long */
pnpid_t pnpid;
symtab_t *t;
int level;
int len;
/* set the driver operation level, if applicable */
if (rodent.level < 0)
rodent.level = 1;
ioctl(rodent.mfd, MOUSE_SETLEVEL, &rodent.level);
rodent.level = (ioctl(rodent.mfd, MOUSE_GETLEVEL, &level) == 0) ? level : 0;
/*
2003-11-13 08:26:29 +00:00
* Interrogate the driver and get some intelligence on the device...
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* The following ioctl functions are not always supported by device
* drivers. When the driver doesn't support them, we just trust the
* user to supply valid information.
*/
rodent.hw.iftype = MOUSE_IF_UNKNOWN;
rodent.hw.model = MOUSE_MODEL_GENERIC;
ioctl(rodent.mfd, MOUSE_GETHWINFO, &rodent.hw);
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
2003-11-13 08:26:29 +00:00
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
rodent.mode.protocol = MOUSE_PROTO_UNKNOWN;
rodent.mode.rate = -1;
rodent.mode.resolution = MOUSE_RES_UNKNOWN;
rodent.mode.accelfactor = 0;
rodent.mode.level = 0;
if (ioctl(rodent.mfd, MOUSE_GETMODE, &rodent.mode) == 0) {
2003-11-13 08:26:29 +00:00
if ((rodent.mode.protocol == MOUSE_PROTO_UNKNOWN)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
|| (rodent.mode.protocol >= sizeof(proto)/sizeof(proto[0]))) {
logwarnx("unknown mouse protocol (%d)", rodent.mode.protocol);
return MOUSE_PROTO_UNKNOWN;
2003-11-13 08:26:29 +00:00
} else {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* INPORT and BUS are the same... */
if (rodent.mode.protocol == MOUSE_PROTO_INPORT)
2003-11-13 08:26:29 +00:00
rodent.mode.protocol = MOUSE_PROTO_BUS;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.mode.protocol != rodent.rtype) {
/* Hmm, the driver doesn't agree with the user... */
2003-11-13 08:26:29 +00:00
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
logwarnx("mouse type mismatch (%s != %s), %s is assumed",
r_name(rodent.mode.protocol), r_name(rodent.rtype),
r_name(rodent.mode.protocol));
rodent.rtype = rodent.mode.protocol;
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
2003-11-13 08:26:29 +00:00
}
cur_proto[4] = rodent.mode.packetsize;
cur_proto[0] = rodent.mode.syncmask[0]; /* header byte bit mask */
cur_proto[1] = rodent.mode.syncmask[1]; /* header bit pattern */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
/* maybe this is a PnP mouse... */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.mode.protocol == MOUSE_PROTO_UNKNOWN) {
2003-11-13 08:26:29 +00:00
if (rodent.flags & NoPnP)
return rodent.rtype;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (((len = pnpgets(pnpbuf)) <= 0) || !pnpparse(&pnpid, pnpbuf, len))
2003-11-13 08:26:29 +00:00
return rodent.rtype;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
2003-11-13 08:26:29 +00:00
debug("PnP serial mouse: '%*.*s' '%*.*s' '%*.*s'",
pnpid.neisaid, pnpid.neisaid, pnpid.eisaid,
pnpid.ncompat, pnpid.ncompat, pnpid.compat,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
pnpid.ndescription, pnpid.ndescription, pnpid.description);
/* we have a valid PnP serial device ID */
2003-11-13 08:26:29 +00:00
rodent.hw.iftype = MOUSE_IF_SERIAL;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
t = pnpproto(&pnpid);
if (t != NULL) {
2003-11-13 08:26:29 +00:00
rodent.mode.protocol = t->val;
rodent.hw.model = t->val2;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
} else {
2003-11-13 08:26:29 +00:00
rodent.mode.protocol = MOUSE_PROTO_UNKNOWN;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
if (rodent.mode.protocol == MOUSE_PROTO_INPORT)
rodent.mode.protocol = MOUSE_PROTO_BUS;
2003-11-13 08:26:29 +00:00
/* make final adjustment */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.mode.protocol != MOUSE_PROTO_UNKNOWN) {
if (rodent.mode.protocol != rodent.rtype) {
/* Hmm, the device doesn't agree with the user... */
2003-11-13 08:26:29 +00:00
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
logwarnx("mouse type mismatch (%s != %s), %s is assumed",
r_name(rodent.mode.protocol), r_name(rodent.rtype),
r_name(rodent.mode.protocol));
rodent.rtype = rodent.mode.protocol;
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
}
}
debug("proto params: %02x %02x %02x %02x %d %02x %02x",
2003-11-13 08:26:29 +00:00
cur_proto[0], cur_proto[1], cur_proto[2], cur_proto[3],
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
cur_proto[4], cur_proto[5], cur_proto[6]);
return rodent.rtype;
}
static char *
r_if(int iftype)
{
char *s;
s = gettokenname(rifs, iftype);
return (s == NULL) ? "unknown" : s;
}
static char *
r_name(int type)
{
2003-11-13 08:26:29 +00:00
return ((type == MOUSE_PROTO_UNKNOWN)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
|| (type > sizeof(rnames)/sizeof(rnames[0]) - 1))
? "unknown" : rnames[type];
}
static char *
r_model(int model)
{
char *s;
s = gettokenname(rmodels, model);
return (s == NULL) ? "unknown" : s;
}
static void
r_init(void)
{
unsigned char buf[16]; /* scrach buffer */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
fd_set fds;
char *s;
char c;
int i;
/**
2003-11-13 08:26:29 +00:00
** This comment is a little out of context here, but it contains
** some useful information...
********************************************************************
**
** The following lines take care of the Logitech MouseMan protocols.
**
** NOTE: There are different versions of both MouseMan and TrackMan!
** Hence I add another protocol P_LOGIMAN, which the user can
** specify as MouseMan in his XF86Config file. This entry was
** formerly handled as a special case of P_MS. However, people
** who don't have the middle button problem, can still specify
** Microsoft and use P_MS.
**
** By default, these mice should use a 3 byte Microsoft protocol
** plus a 4th byte for the middle button. However, the mouse might
** have switched to a different protocol before we use it, so I send
** the proper sequence just in case.
**
** NOTE: - all commands to (at least the European) MouseMan have to
** be sent at 1200 Baud.
** - each command starts with a '*'.
** - whenever the MouseMan receives a '*', it will switch back
** to 1200 Baud. Hence I have to select the desired protocol
** first, then select the baud rate.
**
** The protocols supported by the (European) MouseMan are:
** - 5 byte packed binary protocol, as with the Mouse Systems
** mouse. Selected by sequence "*U".
** - 2 button 3 byte MicroSoft compatible protocol. Selected
** by sequence "*V".
** - 3 button 3+1 byte MicroSoft compatible protocol (default).
** Selected by sequence "*X".
**
** The following baud rates are supported:
** - 1200 Baud (default). Selected by sequence "*n".
** - 9600 Baud. Selected by sequence "*q".
**
** Selecting a sample rate is no longer supported with the MouseMan!
** Some additional lines in xf86Config.c take care of ill configured
** baud rates and sample rates. (The user will get an error.)
*/
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
switch (rodent.rtype) {
case MOUSE_PROTO_LOGI:
2003-11-13 08:26:29 +00:00
/*
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* The baud rate selection command must be sent at the current
2003-11-13 08:26:29 +00:00
* baud rate; try all likely settings
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
*/
setmousespeed(9600, rodent.baudrate, rodentcflags[rodent.rtype]);
setmousespeed(4800, rodent.baudrate, rodentcflags[rodent.rtype]);
setmousespeed(2400, rodent.baudrate, rodentcflags[rodent.rtype]);
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
/* select MM series data format */
write(rodent.mfd, "S", 1);
setmousespeed(rodent.baudrate, rodent.baudrate,
rodentcflags[MOUSE_PROTO_MM]);
/* select report rate/frequency */
if (rodent.rate <= 0) write(rodent.mfd, "O", 1);
else if (rodent.rate <= 15) write(rodent.mfd, "J", 1);
else if (rodent.rate <= 27) write(rodent.mfd, "K", 1);
else if (rodent.rate <= 42) write(rodent.mfd, "L", 1);
else if (rodent.rate <= 60) write(rodent.mfd, "R", 1);
else if (rodent.rate <= 85) write(rodent.mfd, "M", 1);
else if (rodent.rate <= 125) write(rodent.mfd, "Q", 1);
else write(rodent.mfd, "N", 1);
break;
case MOUSE_PROTO_LOGIMOUSEMAN:
/* The command must always be sent at 1200 baud */
setmousespeed(1200, 1200, rodentcflags[rodent.rtype]);
write(rodent.mfd, "*X", 2);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_HITTAB:
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
/*
* Initialize Hitachi PUMA Plus - Model 1212E to desired settings.
* The tablet must be configured to be in MM mode, NO parity,
* Binary Format. xf86Info.sampleRate controls the sensativity
* of the tablet. We only use this tablet for it's 4-button puck
* so we don't run in "Absolute Mode"
*/
write(rodent.mfd, "z8", 2); /* Set Parity = "NONE" */
usleep(50000);
write(rodent.mfd, "zb", 2); /* Set Format = "Binary" */
usleep(50000);
write(rodent.mfd, "@", 1); /* Set Report Mode = "Stream" */
usleep(50000);
write(rodent.mfd, "R", 1); /* Set Output Rate = "45 rps" */
usleep(50000);
write(rodent.mfd, "I\x20", 2); /* Set Incrememtal Mode "20" */
usleep(50000);
write(rodent.mfd, "E", 1); /* Set Data Type = "Relative */
usleep(50000);
/* Resolution is in 'lines per inch' on the Hitachi tablet */
2003-11-13 08:26:29 +00:00
if (rodent.resolution == MOUSE_RES_LOW) c = 'g';
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
else if (rodent.resolution == MOUSE_RES_MEDIUMLOW) c = 'e';
else if (rodent.resolution == MOUSE_RES_MEDIUMHIGH) c = 'h';
else if (rodent.resolution == MOUSE_RES_HIGH) c = 'd';
2003-11-13 08:26:29 +00:00
else if (rodent.resolution <= 40) c = 'g';
else if (rodent.resolution <= 100) c = 'd';
else if (rodent.resolution <= 200) c = 'e';
else if (rodent.resolution <= 500) c = 'h';
else if (rodent.resolution <= 1000) c = 'j';
else c = 'd';
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
write(rodent.mfd, &c, 1);
usleep(50000);
write(rodent.mfd, "\021", 1); /* Resume DATA output */
break;
case MOUSE_PROTO_THINK:
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
/* the PnP ID string may be sent again, discard it */
usleep(200000);
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
/* send the command to initialize the beast */
for (s = "E5E5"; *s; ++s) {
write(rodent.mfd, s, 1);
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
break;
read(rodent.mfd, &c, 1);
debug("%c", c);
if (c != *s)
2003-11-13 08:26:29 +00:00
break;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
case MOUSE_PROTO_JOGDIAL:
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_MSC:
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
if (rodent.flags & ClearDTR) {
i = TIOCM_DTR;
ioctl(rodent.mfd, TIOCMBIC, &i);
2003-11-13 08:26:29 +00:00
}
if (rodent.flags & ClearRTS) {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
i = TIOCM_RTS;
ioctl(rodent.mfd, TIOCMBIC, &i);
2003-11-13 08:26:29 +00:00
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
case MOUSE_PROTO_SYSMOUSE:
if (rodent.hw.iftype == MOUSE_IF_SYSMOUSE)
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
/* FALLTHROUGH */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_BUS:
case MOUSE_PROTO_INPORT:
case MOUSE_PROTO_PS2:
if (rodent.rate >= 0)
rodent.mode.rate = rodent.rate;
if (rodent.resolution != MOUSE_RES_UNKNOWN)
rodent.mode.resolution = rodent.resolution;
ioctl(rodent.mfd, MOUSE_SETMODE, &rodent.mode);
break;
case MOUSE_PROTO_X10MOUSEREM:
mremote_serversetup();
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
break;
case MOUSE_PROTO_VERSAPAD:
tcsendbreak(rodent.mfd, 0); /* send break for 400 msec */
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
for (i = 0; i < 7; ++i) {
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
break;
read(rodent.mfd, &c, 1);
buf[i] = c;
}
debug("%s\n", buf);
if ((buf[0] != 'V') || (buf[1] != 'P')|| (buf[7] != '\r'))
break;
setmousespeed(9600, rodent.baudrate, rodentcflags[rodent.rtype]);
tcsendbreak(rodent.mfd, 0); /* send break for 400 msec again */
for (i = 0; i < 7; ++i) {
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
break;
read(rodent.mfd, &c, 1);
debug("%c", c);
if (c != buf[i])
break;
}
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
default:
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
break;
}
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static int
r_protocol(u_char rBuf, mousestatus_t *act)
{
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* MOUSE_MSS_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
2003-11-13 08:26:29 +00:00
static int butmapmss[4] = { /* Microsoft, MouseMan, GlidePoint,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
IntelliMouse, Thinking Mouse */
2003-11-13 08:26:29 +00:00
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
};
2003-11-13 08:26:29 +00:00
static int butmapmss2[4] = { /* Microsoft, MouseMan, GlidePoint,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
Thinking Mouse */
2003-11-13 08:26:29 +00:00
0,
MOUSE_BUTTON4DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
};
/* MOUSE_INTELLI_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
static int butmapintelli[4] = { /* IntelliMouse, NetMouse, Mie Mouse,
MouseMan+ */
2003-11-13 08:26:29 +00:00
0,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON4DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
};
/* MOUSE_MSC_BUTTON?UP -> MOUSE_BUTTON?DOWN */
2003-11-13 08:26:29 +00:00
static int butmapmsc[8] = { /* MouseSystems, MMSeries, Logitech,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
Bus, sysmouse */
2003-11-13 08:26:29 +00:00
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
};
/* MOUSE_PS2_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
static int butmapps2[8] = { /* PS/2 */
2003-11-13 08:26:29 +00:00
0,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
};
/* for Hitachi tablet */
static int butmaphit[8] = { /* MM HitTablet */
2003-11-13 08:26:29 +00:00
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON4DOWN,
MOUSE_BUTTON5DOWN,
MOUSE_BUTTON6DOWN,
MOUSE_BUTTON7DOWN,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
};
/* for serial VersaPad */
static int butmapversa[8] = { /* VersaPad */
2003-11-13 08:26:29 +00:00
0,
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
};
/* for PS/2 VersaPad */
static int butmapversaps2[8] = { /* VersaPad */
2003-11-13 08:26:29 +00:00
0,
MOUSE_BUTTON3DOWN,
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
};
static int pBufP = 0;
static unsigned char pBuf[8];
static int prev_x, prev_y;
static int on = FALSE;
int x, y;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
debug("received char 0x%x",(int)rBuf);
if (rodent.rtype == MOUSE_PROTO_KIDSPAD)
return kidspad(rBuf, act) ;
2005-04-13 07:25:45 +00:00
if (rodent.rtype == MOUSE_PROTO_GTCO_DIGIPAD)
return gtco_digipad(rBuf, act);
/*
* Hack for resyncing: We check here for a package that is:
* a) illegal (detected by wrong data-package header)
* b) invalid (0x80 == -128 and that might be wrong for MouseSystems)
* c) bad header-package
*
* NOTE: b) is a voilation of the MouseSystems-Protocol, since values of
* -128 are allowed, but since they are very seldom we can easily
* use them as package-header with no button pressed.
* NOTE/2: On a PS/2 mouse any byte is valid as a data byte. Furthermore,
* 0x80 is not valid as a header byte. For a PS/2 mouse we skip
* checking data bytes.
* For resyncing a PS/2 mouse we require the two most significant
* bits in the header byte to be 0. These are the overflow bits,
* and in case of an overflow we actually lose sync. Overflows
* are very rare, however, and we quickly gain sync again after
* an overflow condition. This is the best we can do. (Actually,
* we could use bit 0x08 in the header byte for resyncing, since
* that bit is supposed to be always on, but nobody told
* Microsoft...)
*/
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (pBufP != 0 && rodent.rtype != MOUSE_PROTO_PS2 &&
((rBuf & cur_proto[2]) != cur_proto[3] || rBuf == 0x80))
{
pBufP = 0; /* skip package */
}
2003-11-13 08:26:29 +00:00
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (pBufP == 0 && (rBuf & cur_proto[0]) != cur_proto[1])
return 0;
/* is there an extra data byte? */
if (pBufP >= cur_proto[4] && (rBuf & cur_proto[0]) != cur_proto[1])
{
/*
* Hack for Logitech MouseMan Mouse - Middle button
*
* Unfortunately this mouse has variable length packets: the standard
* Microsoft 3 byte packet plus an optional 4th byte whenever the
* middle button status changes.
*
* We have already processed the standard packet with the movement
* and button info. Now post an event message with the old status
* of the left and right buttons and the updated middle button.
*/
/*
* Even worse, different MouseMen and TrackMen differ in the 4th
* byte: some will send 0x00/0x20, others 0x01/0x21, or even
* 0x02/0x22, so I have to strip off the lower bits.
2003-11-13 08:26:29 +00:00
*
* [JCH-96/01/21]
* HACK for ALPS "fourth button". (It's bit 0x10 of the "fourth byte"
* and it is activated by tapping the glidepad with the finger! 8^)
* We map it to bit bit3, and the reverse map in xf86Events just has
* to be extended so that it is identified as Button 4. The lower
* half of the reverse-map may remain unchanged.
*/
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
2003-11-13 08:26:29 +00:00
/*
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* [KY-97/08/03]
* Receive the fourth byte only when preceding three bytes have
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* been detected (pBufP >= cur_proto[4]). In the previous
* versions, the test was pBufP == 0; thus, we may have mistakingly
2003-11-13 08:26:29 +00:00
* received a byte even if we didn't see anything preceding
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* the byte.
*/
if ((rBuf & cur_proto[5]) != cur_proto[6]) {
2003-11-13 08:26:29 +00:00
pBufP = 0;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
return 0;
}
switch (rodent.rtype) {
#if notyet
case MOUSE_PROTO_MARIQUA:
2003-11-13 08:26:29 +00:00
/*
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* This mouse has 16! buttons in addition to the standard
* three of them. They return 0x10 though 0x1f in the
* so-called `ten key' mode and 0x30 though 0x3f in the
2003-11-13 08:26:29 +00:00
* `function key' mode. As there are only 31 bits for
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* button state (including the standard three), we ignore
* the bit 0x20 and don't distinguish the two modes.
*/
act->dx = act->dy = act->dz = 0;
act->obutton = act->button;
rBuf &= 0x1f;
act->button = (1 << (rBuf - 13))
2003-11-13 08:26:29 +00:00
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
/*
* FIXME: this is a button "down" event. There needs to be
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* a corresponding button "up" event... XXX
*/
break;
#endif /* notyet */
case MOUSE_PROTO_JOGDIAL:
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/*
* IntelliMouse, NetMouse (including NetMouse Pro) and Mie Mouse
* always send the fourth byte, whereas the fourth byte is
2003-11-13 08:26:29 +00:00
* optional for GlidePoint and ThinkingMouse. The fourth byte
* is also optional for MouseMan+ and FirstMouse+ in their
* native mode. It is always sent if they are in the IntelliMouse
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* compatible mode.
2003-11-13 08:26:29 +00:00
*/
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_INTELLI: /* IntelliMouse, NetMouse, Mie Mouse,
MouseMan+ */
act->dx = act->dy = 0;
act->dz = (rBuf & 0x08) ? (rBuf & 0x0f) - 16 : (rBuf & 0x0f);
if ((act->dz >= 7) || (act->dz <= -7))
act->dz = 0;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
act->obutton = act->button;
act->button = butmapintelli[(rBuf & MOUSE_MSS_BUTTONS) >> 4]
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
break;
default:
act->dx = act->dy = act->dz = 0;
act->obutton = act->button;
act->button = butmapmss2[(rBuf & MOUSE_MSS_BUTTONS) >> 4]
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
break;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
act->flags = ((act->dx || act->dy || act->dz) ? MOUSE_POSCHANGED : 0)
| (act->obutton ^ act->button);
2003-11-13 08:26:29 +00:00
pBufP = 0;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
return act->flags;
}
2003-11-13 08:26:29 +00:00
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (pBufP >= cur_proto[4])
pBufP = 0;
pBuf[pBufP++] = rBuf;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (pBufP != cur_proto[4])
return 0;
2003-11-13 08:26:29 +00:00
/*
* assembly full package
*/
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
debug("assembled full packet (len %d) %x,%x,%x,%x,%x,%x,%x,%x",
2003-11-13 08:26:29 +00:00
cur_proto[4],
pBuf[0], pBuf[1], pBuf[2], pBuf[3],
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
pBuf[4], pBuf[5], pBuf[6], pBuf[7]);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
act->dz = 0;
act->obutton = act->button;
2003-11-13 08:26:29 +00:00
switch (rodent.rtype)
{
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_MS: /* Microsoft */
case MOUSE_PROTO_LOGIMOUSEMAN: /* MouseMan/TrackMan */
case MOUSE_PROTO_X10MOUSEREM: /* X10 MouseRemote */
act->button = act->obutton & MOUSE_BUTTON4DOWN;
if (rodent.flags & ChordMiddle)
act->button |= ((pBuf[0] & MOUSE_MSS_BUTTONS) == MOUSE_MSS_BUTTONS)
2003-11-13 08:26:29 +00:00
? MOUSE_BUTTON2DOWN
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
: butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
else
act->button |= (act->obutton & MOUSE_BUTTON2DOWN)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
| butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
2003-11-13 08:26:29 +00:00
/* Send X10 btn events to remote client (ensure -128-+127 range) */
2003-11-13 08:26:29 +00:00
if ((rodent.rtype == MOUSE_PROTO_X10MOUSEREM) &&
((pBuf[0] & 0xFC) == 0x44) && (pBuf[2] == 0x3F)) {
if (rodent.mremcfd >= 0) {
2003-11-13 08:26:29 +00:00
unsigned char key = (signed char)(((pBuf[0] & 0x03) << 6) |
(pBuf[1] & 0x3F));
write(rodent.mremcfd, &key, 1);
}
return 0;
}
act->dx = (signed char)(((pBuf[0] & 0x03) << 6) | (pBuf[1] & 0x3F));
act->dy = (signed char)(((pBuf[0] & 0x0C) << 4) | (pBuf[2] & 0x3F));
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
case MOUSE_PROTO_GLIDEPOINT: /* GlidePoint */
case MOUSE_PROTO_THINK: /* ThinkingMouse */
case MOUSE_PROTO_INTELLI: /* IntelliMouse, NetMouse, Mie Mouse,
MouseMan+ */
act->button = (act->obutton & (MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN))
2003-11-13 08:26:29 +00:00
| butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
act->dx = (signed char)(((pBuf[0] & 0x03) << 6) | (pBuf[1] & 0x3F));
act->dy = (signed char)(((pBuf[0] & 0x0C) << 4) | (pBuf[2] & 0x3F));
break;
2003-11-13 08:26:29 +00:00
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_MSC: /* MouseSystems Corp */
#if notyet
case MOUSE_PROTO_MARIQUA: /* Mariqua */
#endif
act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS];
act->dx = (signed char)(pBuf[1]) + (signed char)(pBuf[3]);
act->dy = - ((signed char)(pBuf[2]) + (signed char)(pBuf[4]));
break;
case MOUSE_PROTO_JOGDIAL: /* JogDial */
if (rBuf == 0x6c)
act->dz = -1;
if (rBuf == 0x72)
act->dz = 1;
if (rBuf == 0x64)
act->button = MOUSE_BUTTON1DOWN;
if (rBuf == 0x75)
act->button = 0;
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_HITTAB: /* MM HitTablet */
act->button = butmaphit[pBuf[0] & 0x07];
act->dx = (pBuf[0] & MOUSE_MM_XPOSITIVE) ? pBuf[1] : - pBuf[1];
act->dy = (pBuf[0] & MOUSE_MM_YPOSITIVE) ? - pBuf[2] : pBuf[2];
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_MM: /* MM Series */
case MOUSE_PROTO_LOGI: /* Logitech Mice */
act->button = butmapmsc[pBuf[0] & MOUSE_MSC_BUTTONS];
act->dx = (pBuf[0] & MOUSE_MM_XPOSITIVE) ? pBuf[1] : - pBuf[1];
act->dy = (pBuf[0] & MOUSE_MM_YPOSITIVE) ? - pBuf[2] : pBuf[2];
break;
2003-11-13 08:26:29 +00:00
case MOUSE_PROTO_VERSAPAD: /* VersaPad */
act->button = butmapversa[(pBuf[0] & MOUSE_VERSA_BUTTONS) >> 3];
act->button |= (pBuf[0] & MOUSE_VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
act->dx = act->dy = 0;
if (!(pBuf[0] & MOUSE_VERSA_IN_USE)) {
on = FALSE;
break;
}
x = (pBuf[2] << 6) | pBuf[1];
if (x & 0x800)
x -= 0x1000;
y = (pBuf[4] << 6) | pBuf[3];
if (y & 0x800)
y -= 0x1000;
if (on) {
act->dx = prev_x - x;
act->dy = prev_y - y;
} else {
on = TRUE;
}
prev_x = x;
prev_y = y;
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_BUS: /* Bus */
case MOUSE_PROTO_INPORT: /* InPort */
act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS];
act->dx = (signed char)pBuf[1];
act->dy = - (signed char)pBuf[2];
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_PROTO_PS2: /* PS/2 */
act->button = butmapps2[pBuf[0] & MOUSE_PS2_BUTTONS];
act->dx = (pBuf[0] & MOUSE_PS2_XNEG) ? pBuf[1] - 256 : pBuf[1];
act->dy = (pBuf[0] & MOUSE_PS2_YNEG) ? -(pBuf[2] - 256) : -pBuf[2];
/*
* Moused usually operates the psm driver at the operation level 1
* which sends mouse data in MOUSE_PROTO_SYSMOUSE protocol.
2003-11-13 08:26:29 +00:00
* The following code takes effect only when the user explicitly
* requets the level 2 at which wheel movement and additional button
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* actions are encoded in model-dependent formats. At the level 0
* the following code is no-op because the psm driver says the model
* is MOUSE_MODEL_GENERIC.
*/
switch (rodent.hw.model) {
case MOUSE_MODEL_EXPLORER:
/* wheel and additional button data is in the fourth byte */
act->dz = (pBuf[3] & MOUSE_EXPLORER_ZNEG)
? (pBuf[3] & 0x0f) - 16 : (pBuf[3] & 0x0f);
act->button |= (pBuf[3] & MOUSE_EXPLORER_BUTTON4DOWN)
? MOUSE_BUTTON4DOWN : 0;
act->button |= (pBuf[3] & MOUSE_EXPLORER_BUTTON5DOWN)
? MOUSE_BUTTON5DOWN : 0;
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_MODEL_INTELLI:
case MOUSE_MODEL_NET:
/* wheel data is in the fourth byte */
act->dz = (signed char)pBuf[3];
if ((act->dz >= 7) || (act->dz <= -7))
act->dz = 0;
/* some compatible mice may have additional buttons */
act->button |= (pBuf[0] & MOUSE_PS2INTELLI_BUTTON4DOWN)
? MOUSE_BUTTON4DOWN : 0;
act->button |= (pBuf[0] & MOUSE_PS2INTELLI_BUTTON5DOWN)
? MOUSE_BUTTON5DOWN : 0;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
case MOUSE_MODEL_MOUSEMANPLUS:
if (((pBuf[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC)
&& (abs(act->dx) > 191)
&& MOUSE_PS2PLUS_CHECKBITS(pBuf)) {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* the extended data packet encodes button and wheel events */
switch (MOUSE_PS2PLUS_PACKET_TYPE(pBuf)) {
case 1:
/* wheel data packet */
act->dx = act->dy = 0;
if (pBuf[2] & 0x80) {
/* horizontal roller count - ignore it XXX*/
} else {
/* vertical roller count */
act->dz = (pBuf[2] & MOUSE_PS2PLUS_ZNEG)
? (pBuf[2] & 0x0f) - 16 : (pBuf[2] & 0x0f);
}
act->button |= (pBuf[2] & MOUSE_PS2PLUS_BUTTON4DOWN)
? MOUSE_BUTTON4DOWN : 0;
act->button |= (pBuf[2] & MOUSE_PS2PLUS_BUTTON5DOWN)
? MOUSE_BUTTON5DOWN : 0;
break;
case 2:
/* this packet type is reserved by Logitech */
/*
* IBM ScrollPoint Mouse uses this packet type to
* encode both vertical and horizontal scroll movement.
*/
act->dx = act->dy = 0;
/* horizontal roller count */
if (pBuf[2] & 0x0f)
act->dz = (pBuf[2] & MOUSE_SPOINT_WNEG) ? -2 : 2;
/* vertical roller count */
if (pBuf[2] & 0xf0)
act->dz = (pBuf[2] & MOUSE_SPOINT_ZNEG) ? -1 : 1;
#if 0
/* vertical roller count */
act->dz = (pBuf[2] & MOUSE_SPOINT_ZNEG)
? ((pBuf[2] >> 4) & 0x0f) - 16
: ((pBuf[2] >> 4) & 0x0f);
/* horizontal roller count */
act->dw = (pBuf[2] & MOUSE_SPOINT_WNEG)
? (pBuf[2] & 0x0f) - 16 : (pBuf[2] & 0x0f);
#endif
break;
case 0:
/* device type packet - shouldn't happen */
/* FALLTHROUGH */
default:
act->dx = act->dy = 0;
act->button = act->obutton;
2003-11-13 08:26:29 +00:00
debug("unknown PS2++ packet type %d: 0x%02x 0x%02x 0x%02x\n",
MOUSE_PS2PLUS_PACKET_TYPE(pBuf),
pBuf[0], pBuf[1], pBuf[2]);
break;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
} else {
/* preserve button states */
act->button |= act->obutton & MOUSE_EXTBUTTONS;
}
break;
case MOUSE_MODEL_GLIDEPOINT:
/* `tapping' action */
act->button |= ((pBuf[0] & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN;
break;
case MOUSE_MODEL_NETSCROLL:
/* three addtional bytes encode buttons and wheel events */
act->button |= (pBuf[3] & MOUSE_PS2_BUTTON3DOWN)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
? MOUSE_BUTTON4DOWN : 0;
act->button |= (pBuf[3] & MOUSE_PS2_BUTTON1DOWN)
? MOUSE_BUTTON5DOWN : 0;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
act->dz = (pBuf[3] & MOUSE_PS2_XNEG) ? pBuf[4] - 256 : pBuf[4];
break;
case MOUSE_MODEL_THINK:
/* the fourth button state in the first byte */
act->button |= (pBuf[0] & MOUSE_PS2_TAP) ? MOUSE_BUTTON4DOWN : 0;
break;
case MOUSE_MODEL_VERSAPAD:
act->button = butmapversaps2[pBuf[0] & MOUSE_PS2VERSA_BUTTONS];
act->button |=
(pBuf[0] & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
act->dx = act->dy = 0;
if (!(pBuf[0] & MOUSE_PS2VERSA_IN_USE)) {
on = FALSE;
break;
}
x = ((pBuf[4] << 8) & 0xf00) | pBuf[1];
if (x & 0x800)
x -= 0x1000;
y = ((pBuf[4] << 4) & 0xf00) | pBuf[2];
if (y & 0x800)
y -= 0x1000;
if (on) {
act->dx = prev_x - x;
act->dy = prev_y - y;
} else {
on = TRUE;
}
prev_x = x;
prev_y = y;
break;
case MOUSE_MODEL_4D:
act->dx = (pBuf[1] & 0x80) ? pBuf[1] - 256 : pBuf[1];
act->dy = (pBuf[2] & 0x80) ? -(pBuf[2] - 256) : -pBuf[2];
switch (pBuf[0] & MOUSE_4D_WHEELBITS) {
case 0x10:
act->dz = 1;
break;
case 0x30:
act->dz = -1;
break;
case 0x40: /* 2nd wheel rolling right XXX */
act->dz = 2;
break;
case 0xc0: /* 2nd wheel rolling left XXX */
act->dz = -2;
break;
}
break;
case MOUSE_MODEL_4DPLUS:
if ((act->dx < 16 - 256) && (act->dy > 256 - 16)) {
act->dx = act->dy = 0;
if (pBuf[2] & MOUSE_4DPLUS_BUTTON4DOWN)
act->button |= MOUSE_BUTTON4DOWN;
act->dz = (pBuf[2] & MOUSE_4DPLUS_ZNEG)
? ((pBuf[2] & 0x07) - 8) : (pBuf[2] & 0x07);
} else {
/* preserve previous button states */
act->button |= act->obutton & MOUSE_EXTBUTTONS;
}
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case MOUSE_MODEL_GENERIC:
default:
break;
}
break;
case MOUSE_PROTO_SYSMOUSE: /* sysmouse */
act->button = butmapmsc[(~pBuf[0]) & MOUSE_SYS_STDBUTTONS];
act->dx = (signed char)(pBuf[1]) + (signed char)(pBuf[3]);
act->dy = - ((signed char)(pBuf[2]) + (signed char)(pBuf[4]));
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.level == 1) {
act->dz = ((signed char)(pBuf[5] << 1) + (signed char)(pBuf[6] << 1)) >> 1;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
act->button |= ((~pBuf[7] & MOUSE_SYS_EXTBUTTONS) << 3);
}
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
default:
return 0;
}
2003-11-13 08:26:29 +00:00
/*
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* We don't reset pBufP here yet, as there may be an additional data
* byte in some protocols. See above.
*/
/* has something changed? */
act->flags = ((act->dx || act->dy || act->dz) ? MOUSE_POSCHANGED : 0)
| (act->obutton ^ act->button);
return act->flags;
}
static int
r_statetrans(mousestatus_t *a1, mousestatus_t *a2, int trans)
{
int changed;
int flags;
a2->dx = a1->dx;
a2->dy = a1->dy;
a2->dz = a1->dz;
a2->obutton = a2->button;
a2->button = a1->button;
a2->flags = a1->flags;
changed = FALSE;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (rodent.flags & Emulate3Button) {
if (debug > 2)
2003-11-13 08:26:29 +00:00
debug("state:%d, trans:%d -> state:%d",
mouse_button_state, trans,
states[mouse_button_state].s[trans]);
/*
* Avoid re-ordering button and movement events. While a button
* event is deferred, throw away up to BUTTON2_MAXMOVE movement
* events to allow for mouse jitter. If more movement events
* occur, then complete the deferred button events immediately.
*/
if ((a2->dx != 0 || a2->dy != 0) &&
S_DELAYED(states[mouse_button_state].s[trans])) {
if (++mouse_move_delayed > BUTTON2_MAXMOVE) {
mouse_move_delayed = 0;
mouse_button_state =
states[mouse_button_state].s[A_TIMEOUT];
changed = TRUE;
} else
a2->dx = a2->dy = 0;
} else
mouse_move_delayed = 0;
if (mouse_button_state != states[mouse_button_state].s[trans])
changed = TRUE;
if (changed)
gettimeofday(&mouse_button_state_tv, NULL);
mouse_button_state = states[mouse_button_state].s[trans];
a2->button &=
~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN);
a2->button &= states[mouse_button_state].mask;
a2->button |= states[mouse_button_state].buttons;
flags = a2->flags & MOUSE_POSCHANGED;
flags |= a2->obutton ^ a2->button;
if (flags & MOUSE_BUTTON2DOWN) {
a2->flags = flags & MOUSE_BUTTON2DOWN;
r_timestamp(a2);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
a2->flags = flags;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
return changed;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
/* phisical to logical button mapping */
static int p2l[MOUSE_MAXBUTTON] = {
2003-11-13 08:26:29 +00:00
MOUSE_BUTTON1DOWN, MOUSE_BUTTON2DOWN, MOUSE_BUTTON3DOWN, MOUSE_BUTTON4DOWN,
MOUSE_BUTTON5DOWN, MOUSE_BUTTON6DOWN, MOUSE_BUTTON7DOWN, MOUSE_BUTTON8DOWN,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
0x00000100, 0x00000200, 0x00000400, 0x00000800,
0x00001000, 0x00002000, 0x00004000, 0x00008000,
0x00010000, 0x00020000, 0x00040000, 0x00080000,
0x00100000, 0x00200000, 0x00400000, 0x00800000,
0x01000000, 0x02000000, 0x04000000, 0x08000000,
0x10000000, 0x20000000, 0x40000000,
};
static char *
skipspace(char *s)
{
while(isspace(*s))
++s;
return s;
}
static int
r_installmap(char *arg)
{
int pbutton;
int lbutton;
char *s;
while (*arg) {
arg = skipspace(arg);
s = arg;
while (isdigit(*arg))
++arg;
arg = skipspace(arg);
if ((arg <= s) || (*arg != '='))
return FALSE;
lbutton = atoi(s);
arg = skipspace(++arg);
s = arg;
while (isdigit(*arg))
++arg;
if ((arg <= s) || (!isspace(*arg) && (*arg != '\0')))
return FALSE;
pbutton = atoi(s);
if ((lbutton <= 0) || (lbutton > MOUSE_MAXBUTTON))
return FALSE;
if ((pbutton <= 0) || (pbutton > MOUSE_MAXBUTTON))
return FALSE;
p2l[pbutton - 1] = 1 << (lbutton - 1);
mstate[lbutton - 1] = &bstate[pbutton - 1];
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
return TRUE;
}
static void
r_map(mousestatus_t *act1, mousestatus_t *act2)
{
register int pb;
register int pbuttons;
int lbuttons;
pbuttons = act1->button;
lbuttons = 0;
act2->obutton = act2->button;
if (pbuttons & rodent.wmode) {
pbuttons &= ~rodent.wmode;
act1->dz = act1->dy;
act1->dx = 0;
act1->dy = 0;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
act2->dx = act1->dx;
act2->dy = act1->dy;
act2->dz = act1->dz;
switch (rodent.zmap[0]) {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
case 0: /* do nothing */
break;
case MOUSE_XAXIS:
if (act1->dz != 0) {
act2->dx = act1->dz;
act2->dz = 0;
}
break;
case MOUSE_YAXIS:
if (act1->dz != 0) {
act2->dy = act1->dz;
act2->dz = 0;
}
break;
default: /* buttons */
pbuttons &= ~(rodent.zmap[0] | rodent.zmap[1]
| rodent.zmap[2] | rodent.zmap[3]);
if ((act1->dz < -1) && rodent.zmap[2]) {
pbuttons |= rodent.zmap[2];
zstate[2].count = 1;
} else if (act1->dz < 0) {
pbuttons |= rodent.zmap[0];
zstate[0].count = 1;
} else if ((act1->dz > 1) && rodent.zmap[3]) {
pbuttons |= rodent.zmap[3];
zstate[3].count = 1;
} else if (act1->dz > 0) {
pbuttons |= rodent.zmap[1];
zstate[1].count = 1;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
act2->dz = 0;
break;
}
for (pb = 0; (pb < MOUSE_MAXBUTTON) && (pbuttons != 0); ++pb) {
lbuttons |= (pbuttons & 1) ? p2l[pb] : 0;
pbuttons >>= 1;
}
act2->button = lbuttons;
act2->flags = ((act2->dx || act2->dy || act2->dz) ? MOUSE_POSCHANGED : 0)
| (act2->obutton ^ act2->button);
}
static void
r_timestamp(mousestatus_t *act)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
{
struct timeval tv;
struct timeval tv1;
struct timeval tv2;
struct timeval tv3;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
int button;
int mask;
int i;
mask = act->flags & MOUSE_BUTTONS;
#if 0
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (mask == 0)
return;
#endif
gettimeofday(&tv1, NULL);
drift_current_tv = tv1;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* double click threshold */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
tv2.tv_sec = rodent.clickthreshold/1000;
tv2.tv_usec = (rodent.clickthreshold%1000)*1000;
2003-11-13 08:26:29 +00:00
timersub(&tv1, &tv2, &tv);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
debug("tv: %ld %ld", tv.tv_sec, tv.tv_usec);
/* 3 button emulation timeout */
tv2.tv_sec = rodent.button2timeout/1000;
tv2.tv_usec = (rodent.button2timeout%1000)*1000;
2003-11-13 08:26:29 +00:00
timersub(&tv1, &tv2, &tv3);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
button = MOUSE_BUTTON1DOWN;
for (i = 0; (i < MOUSE_MAXBUTTON) && (mask != 0); ++i) {
2003-11-13 08:26:29 +00:00
if (mask & 1) {
if (act->button & button) {
/* the button is down */
debug(" : %ld %ld",
bstate[i].tv.tv_sec, bstate[i].tv.tv_usec);
if (timercmp(&tv, &bstate[i].tv, >)) {
2003-11-13 08:26:29 +00:00
bstate[i].count = 1;
} else {
++bstate[i].count;
}
bstate[i].tv = tv1;
2003-11-13 08:26:29 +00:00
} else {
/* the button is up */
bstate[i].tv = tv1;
}
} else {
if (act->button & button) {
/* the button has been down */
if (timercmp(&tv3, &bstate[i].tv, >)) {
bstate[i].count = 1;
bstate[i].tv = tv1;
act->flags |= button;
debug("button %d timeout", i + 1);
}
} else {
/* the button has been up */
}
}
button <<= 1;
mask >>= 1;
}
}
static int
r_timeout(void)
{
struct timeval tv;
struct timeval tv1;
struct timeval tv2;
if (states[mouse_button_state].timeout)
return TRUE;
gettimeofday(&tv1, NULL);
tv2.tv_sec = rodent.button2timeout/1000;
tv2.tv_usec = (rodent.button2timeout%1000)*1000;
2003-11-13 08:26:29 +00:00
timersub(&tv1, &tv2, &tv);
return timercmp(&tv, &mouse_button_state_tv, >);
}
static void
r_click(mousestatus_t *act)
{
struct mouse_info mouse;
int button;
int mask;
int i;
mask = act->flags & MOUSE_BUTTONS;
if (mask == 0)
return;
button = MOUSE_BUTTON1DOWN;
for (i = 0; (i < MOUSE_MAXBUTTON) && (mask != 0); ++i) {
2003-11-13 08:26:29 +00:00
if (mask & 1) {
debug("mstate[%d]->count:%d", i, mstate[i]->count);
2003-11-13 08:26:29 +00:00
if (act->button & button) {
/* the button is down */
mouse.u.event.value = mstate[i]->count;
} else {
/* the button is up */
mouse.u.event.value = 0;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
mouse.operation = MOUSE_BUTTON_EVENT;
mouse.u.event.id = button;
if (debug < 2)
2003-11-13 08:26:29 +00:00
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
debug("button %d count %d", i + 1, mouse.u.event.value);
2003-11-13 08:26:29 +00:00
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
button <<= 1;
mask >>= 1;
}
}
/* $XConsortium: posix_tty.c,v 1.3 95/01/05 20:42:55 kaleb Exp $ */
/* $XFree86: xc/programs/Xserver/hw/xfree86/os-support/shared/posix_tty.c,v 3.4 1995/01/28 17:05:03 dawes Exp $ */
/*
* Copyright 1993 by David Dawes <dawes@physics.su.oz.au>
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
2003-11-13 08:26:29 +00:00
* documentation, and that the name of David Dawes
* not be used in advertising or publicity pertaining to distribution of
* the software without specific, written prior permission.
2003-11-13 08:26:29 +00:00
* David Dawes makes no representations about the suitability of this
* software for any purpose. It is provided "as is" without express or
* implied warranty.
*
2003-11-13 08:26:29 +00:00
* DAVID DAWES DISCLAIMS ALL WARRANTIES WITH REGARD TO
* THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS, IN NO EVENT SHALL DAVID DAWES BE LIABLE FOR
* ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
* CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
static void
setmousespeed(int old, int new, unsigned cflag)
{
struct termios tty;
char *c;
if (tcgetattr(rodent.mfd, &tty) < 0)
{
logwarn("unable to get status of mouse fd");
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
return;
}
tty.c_iflag = IGNBRK | IGNPAR;
tty.c_oflag = 0;
tty.c_lflag = 0;
tty.c_cflag = (tcflag_t)cflag;
tty.c_cc[VTIME] = 0;
tty.c_cc[VMIN] = 1;
switch (old)
{
case 9600:
cfsetispeed(&tty, B9600);
cfsetospeed(&tty, B9600);
break;
case 4800:
cfsetispeed(&tty, B4800);
cfsetospeed(&tty, B4800);
break;
case 2400:
cfsetispeed(&tty, B2400);
cfsetospeed(&tty, B2400);
break;
case 1200:
default:
cfsetispeed(&tty, B1200);
cfsetospeed(&tty, B1200);
}
if (tcsetattr(rodent.mfd, TCSADRAIN, &tty) < 0)
{
logwarn("unable to set status of mouse fd");
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
return;
}
switch (new)
{
case 9600:
c = "*q";
cfsetispeed(&tty, B9600);
cfsetospeed(&tty, B9600);
break;
case 4800:
c = "*p";
cfsetispeed(&tty, B4800);
cfsetospeed(&tty, B4800);
break;
case 2400:
c = "*o";
cfsetispeed(&tty, B2400);
cfsetospeed(&tty, B2400);
break;
case 1200:
default:
c = "*n";
cfsetispeed(&tty, B1200);
cfsetospeed(&tty, B1200);
}
2003-11-13 08:26:29 +00:00
if (rodent.rtype == MOUSE_PROTO_LOGIMOUSEMAN
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
|| rodent.rtype == MOUSE_PROTO_LOGI)
{
if (write(rodent.mfd, c, 2) != 2)
{
logwarn("unable to write to mouse fd");
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
return;
}
}
usleep(100000);
if (tcsetattr(rodent.mfd, TCSADRAIN, &tty) < 0)
logwarn("unable to set status of mouse fd");
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
2003-11-13 08:26:29 +00:00
/*
* PnP COM device support
*
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* It's a simplistic implementation, but it works :-)
* KY, 31/7/97.
*/
/*
2003-11-13 08:26:29 +00:00
* Try to elicit a PnP ID as described in
* Microsoft, Hayes: "Plug and Play External COM Device Specification,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* rev 1.00", 1995.
*
* The routine does not fully implement the COM Enumerator as par Section
* 2.1 of the document. In particular, we don't have idle state in which
2003-11-13 08:26:29 +00:00
* the driver software monitors the com port for dynamic connection or
* removal of a device at the port, because `moused' simply quits if no
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* device is found.
*
2003-11-13 08:26:29 +00:00
* In addition, as PnP COM device enumeration procedure slightly has
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* changed since its first publication, devices which follow earlier
2003-11-13 08:26:29 +00:00
* revisions of the above spec. may fail to respond if the rev 1.0
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* procedure is used. XXX
*/
static int
pnpwakeup1(void)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
{
struct timeval timeout;
fd_set fds;
int i;
2003-11-13 08:26:29 +00:00
/*
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* This is the procedure described in rev 1.0 of PnP COM device spec.
* Unfortunately, some devices which comform to earlier revisions of
* the spec gets confused and do not return the ID string...
*/
debug("PnP COM device rev 1.0 probe...");
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* port initialization (2.1.2) */
ioctl(rodent.mfd, TIOCMGET, &i);
i |= TIOCM_DTR; /* DTR = 1 */
i &= ~TIOCM_RTS; /* RTS = 0 */
ioctl(rodent.mfd, TIOCMSET, &i);
usleep(240000);
/*
2003-11-13 08:26:29 +00:00
* The PnP COM device spec. dictates that the mouse must set DSR
* in response to DTR (by hardware or by software) and that if DSR is
* not asserted, the host computer should think that there is no device
* at this serial port. But some mice just don't do that...
*/
ioctl(rodent.mfd, TIOCMGET, &i);
debug("modem status 0%o", i);
if ((i & TIOCM_DSR) == 0)
return FALSE;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* port setup, 1st phase (2.1.3) */
setmousespeed(1200, 1200, (CS7 | CREAD | CLOCAL | HUPCL));
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 0, RTS = 0 */
ioctl(rodent.mfd, TIOCMBIC, &i);
usleep(240000);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
i = TIOCM_DTR; /* DTR = 1, RTS = 0 */
ioctl(rodent.mfd, TIOCMBIS, &i);
usleep(240000);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* wait for response, 1st phase (2.1.4) */
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
i = TIOCM_RTS; /* DTR = 1, RTS = 1 */
ioctl(rodent.mfd, TIOCMBIS, &i);
/* try to read something */
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
timeout.tv_sec = 0;
timeout.tv_usec = 240000;
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
debug("pnpwakeup1(): valid response in first phase.");
return TRUE;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
/* port setup, 2nd phase (2.1.5) */
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 0, RTS = 0 */
ioctl(rodent.mfd, TIOCMBIC, &i);
usleep(240000);
/* wait for respose, 2nd phase (2.1.6) */
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
ioctl(rodent.mfd, TIOCMBIS, &i);
/* try to read something */
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
timeout.tv_sec = 0;
timeout.tv_usec = 240000;
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
debug("pnpwakeup1(): valid response in second phase.");
return TRUE;
}
return FALSE;
}
static int
pnpwakeup2(void)
{
struct timeval timeout;
fd_set fds;
int i;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/*
* This is a simplified procedure; it simply toggles RTS.
*/
debug("alternate probe...");
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
ioctl(rodent.mfd, TIOCMGET, &i);
i |= TIOCM_DTR; /* DTR = 1 */
i &= ~TIOCM_RTS; /* RTS = 0 */
ioctl(rodent.mfd, TIOCMSET, &i);
usleep(240000);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
setmousespeed(1200, 1200, (CS7 | CREAD | CLOCAL | HUPCL));
/* wait for respose */
i = FREAD;
ioctl(rodent.mfd, TIOCFLUSH, &i);
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
ioctl(rodent.mfd, TIOCMBIS, &i);
/* try to read something */
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
timeout.tv_sec = 0;
timeout.tv_usec = 240000;
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
debug("pnpwakeup2(): valid response.");
return TRUE;
}
return FALSE;
}
static int
pnpgets(char *buf)
{
struct timeval timeout;
fd_set fds;
int begin;
int i;
char c;
if (!pnpwakeup1() && !pnpwakeup2()) {
/*
2003-11-13 08:26:29 +00:00
* According to PnP spec, we should set DTR = 1 and RTS = 0 while
* in idle state. But, `moused' shall set DTR = RTS = 1 and proceed,
* assuming there is something at the port even if it didn't
* respond to the PnP enumeration procedure.
*/
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
ioctl(rodent.mfd, TIOCMBIS, &i);
return 0;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* collect PnP COM device ID (2.1.7) */
begin = -1;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
i = 0;
usleep(240000); /* the mouse must send `Begin ID' within 200msec */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
while (read(rodent.mfd, &c, 1) == 1) {
/* we may see "M", or "M3..." before `Begin ID' */
buf[i++] = c;
2003-11-13 08:26:29 +00:00
if ((c == 0x08) || (c == 0x28)) { /* Begin ID */
debug("begin-id %02x", c);
begin = i - 1;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
2003-11-13 08:26:29 +00:00
}
debug("%c %02x", c, c);
if (i >= 256)
break;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
if (begin < 0) {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* we haven't seen `Begin ID' in time... */
goto connect_idle;
}
++c; /* make it `End ID' */
for (;;) {
2003-11-13 08:26:29 +00:00
FD_ZERO(&fds);
FD_SET(rodent.mfd, &fds);
timeout.tv_sec = 0;
timeout.tv_usec = 240000;
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) <= 0)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
read(rodent.mfd, &buf[i], 1);
2003-11-13 08:26:29 +00:00
if (buf[i++] == c) /* End ID */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
if (i >= 256)
break;
}
if (begin > 0) {
i -= begin;
bcopy(&buf[begin], &buf[0], i);
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* string may not be human readable... */
debug("len:%d, '%-*.*s'", i, i, i, buf);
if (buf[i - 1] == c)
return i; /* a valid PnP string */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/*
2003-11-13 08:26:29 +00:00
* According to PnP spec, we should set DTR = 1 and RTS = 0 while
* in idle state. But, `moused' shall leave the modem control lines
* as they are. See above.
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
*/
connect_idle:
/* we may still have something in the buffer */
return ((i > 0) ? i : 0);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
static int
pnpparse(pnpid_t *id, char *buf, int len)
{
char s[3];
int offset;
int sum = 0;
int i, j;
id->revision = 0;
id->eisaid = NULL;
id->serial = NULL;
id->class = NULL;
id->compat = NULL;
id->description = NULL;
id->neisaid = 0;
id->nserial = 0;
id->nclass = 0;
id->ncompat = 0;
id->ndescription = 0;
if ((buf[0] != 0x28) && (buf[0] != 0x08)) {
/* non-PnP mice */
switch(buf[0]) {
default:
return FALSE;
case 'M': /* Microsoft */
id->eisaid = "PNP0F01";
break;
case 'H': /* MouseSystems */
id->eisaid = "PNP0F04";
break;
}
id->neisaid = strlen(id->eisaid);
id->class = "MOUSE";
id->nclass = strlen(id->class);
debug("non-PnP mouse '%c'", buf[0]);
return TRUE;
}
/* PnP mice */
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
offset = 0x28 - buf[0];
/* calculate checksum */
for (i = 0; i < len - 3; ++i) {
sum += buf[i];
buf[i] += offset;
}
sum += buf[len - 1];
for (; i < len; ++i)
buf[i] += offset;
debug("PnP ID string: '%*.*s'", len, len, buf);
/* revision */
buf[1] -= offset;
buf[2] -= offset;
id->revision = ((buf[1] & 0x3f) << 6) | (buf[2] & 0x3f);
debug("PnP rev %d.%02d", id->revision / 100, id->revision % 100);
/* EISA vender and product ID */
id->eisaid = &buf[3];
id->neisaid = 7;
/* option strings */
i = 10;
if (buf[i] == '\\') {
2003-11-13 08:26:29 +00:00
/* device serial # */
for (j = ++i; i < len; ++i) {
if (buf[i] == '\\')
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
2003-11-13 08:26:29 +00:00
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (i >= len)
i -= 3;
if (i - j == 8) {
2003-11-13 08:26:29 +00:00
id->serial = &buf[j];
id->nserial = 8;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
if (buf[i] == '\\') {
2003-11-13 08:26:29 +00:00
/* PnP class */
for (j = ++i; i < len; ++i) {
if (buf[i] == '\\')
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
2003-11-13 08:26:29 +00:00
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (i >= len)
i -= 3;
if (i > j + 1) {
2003-11-13 08:26:29 +00:00
id->class = &buf[j];
id->nclass = i - j;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
if (buf[i] == '\\') {
/* compatible driver */
2003-11-13 08:26:29 +00:00
for (j = ++i; i < len; ++i) {
if (buf[i] == '\\')
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
2003-11-13 08:26:29 +00:00
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/*
2003-11-13 08:26:29 +00:00
* PnP COM spec prior to v0.96 allowed '*' in this field,
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* it's not allowed now; just igore it.
*/
if (buf[j] == '*')
++j;
if (i >= len)
i -= 3;
if (i > j + 1) {
2003-11-13 08:26:29 +00:00
id->compat = &buf[j];
id->ncompat = i - j;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
if (buf[i] == '\\') {
/* product description */
2003-11-13 08:26:29 +00:00
for (j = ++i; i < len; ++i) {
if (buf[i] == ';')
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
2003-11-13 08:26:29 +00:00
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (i >= len)
i -= 3;
if (i > j + 1) {
2003-11-13 08:26:29 +00:00
id->description = &buf[j];
id->ndescription = i - j;
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
/* checksum exists if there are any optional fields */
if ((id->nserial > 0) || (id->nclass > 0)
|| (id->ncompat > 0) || (id->ndescription > 0)) {
2003-11-13 08:26:29 +00:00
debug("PnP checksum: 0x%X", sum);
sprintf(s, "%02X", sum & 0x0ff);
if (strncmp(s, &buf[len - 3], 2) != 0) {
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
#if 0
2003-11-13 08:26:29 +00:00
/*
* I found some mice do not comply with the PnP COM device
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
* spec regarding checksum... XXX
*/
2003-11-13 08:26:29 +00:00
logwarnx("PnP checksum error", 0);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
return FALSE;
#endif
2003-11-13 08:26:29 +00:00
}
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
return TRUE;
}
static symtab_t *
pnpproto(pnpid_t *id)
{
symtab_t *t;
int i, j;
if (id->nclass > 0)
if (strncmp(id->class, "MOUSE", id->nclass) != 0 &&
strncmp(id->class, "TABLET", id->nclass) != 0)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
/* this is not a mouse! */
return NULL;
if (id->neisaid > 0) {
2003-11-13 08:26:29 +00:00
t = gettoken(pnpprod, id->eisaid, id->neisaid);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (t->val != MOUSE_PROTO_UNKNOWN)
2003-11-13 08:26:29 +00:00
return t;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
/*
* The 'Compatible drivers' field may contain more than one
* ID separated by ','.
*/
if (id->ncompat <= 0)
return NULL;
for (i = 0; i < id->ncompat; ++i) {
2003-11-13 08:26:29 +00:00
for (j = i; id->compat[i] != ','; ++i)
if (i >= id->ncompat)
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
break;
2003-11-13 08:26:29 +00:00
if (i > j) {
t = gettoken(pnpprod, id->compat + j, i - j);
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
if (t->val != MOUSE_PROTO_UNKNOWN)
2003-11-13 08:26:29 +00:00
return t;
The `moused' daemon is made to support various serial mouse protocols to recognized extra buttons and wheel/roller. It now has PnP COM device support code, thus, some recent mouse products are automatically detected and an appropriate protocol is selected. The `-i' option will print the result of auto-detection. - Added support for the following SERIAL mice: ALPS GlidePoint, MS IntelliMouse, Kensington Thinking Mouse (Genius NetMouse, NetMouse Pro, ASCII MieMouse, Logitech MouseMan+, FirstMouse+ are compatible with MS IntelliMouse, when connected to a serial port, thus requires no explicit support) - Added PnP serial mouse identification capability as defined by Microsoft and Hayes in "Plug and Play External COM Device Specification, rev 1.00". This support will enable us to identify the correct protocol to use, or choose a compatible protocol for the given mouse. - Utilize new ioctls defined in `mouse.h' to get hardware and protocol information on PS/2 and bus mouse devices. Try to guess the correct protocol and port combination based on the obtained info. - Use MOUSE_SETLEVEL ioctl. - Use constants defined in `mouse.h' rather than using own definitions. - A New command line option. The -i option prints the information collected though the PnP code and psm/mse ioctls mentioned above, and just quits. This is to test `moused's ability, or inability, to detect the correct protocol for the given mouse automatically. - A new command line option. The -m option maps a physical button to a logical button. - A new command line option. The -z option maps the Z axis movement to another axis or a pair of buttons. - Add other options: -3, -C -F -P. - Added a handler for SIGHUP. This has been suggested by somebody in the past (I don't remember who). He wanted this because he wants to attach or detach a mouse while his laptop is suspended. Now `moused' will reopens and reinitialize the specified port whenever a SIGHUP is received. I don't know how useful this can be...
1997-12-07 08:11:16 +00:00
}
}
return NULL;
}
/* name/val mapping */
static symtab_t *
gettoken(symtab_t *tab, char *s, int len)
{
int i;
for (i = 0; tab[i].name != NULL; ++i) {
if (strncmp(tab[i].name, s, len) == 0)
break;
}
return &tab[i];
}
static char *
gettokenname(symtab_t *tab, int val)
{
int i;
for (i = 0; tab[i].name != NULL; ++i) {
if (tab[i].val == val)
return tab[i].name;
}
return NULL;
}
/*
* code to read from the Genius Kidspad tablet.
The tablet responds to the COM PnP protocol 1.0 with EISA-ID KYE0005,
and to pre-pnp probes (RTS toggle) with 'T' (tablet ?)
9600, 8 bit, parity odd.
The tablet puts out 5 bytes. b0 (mask 0xb8, value 0xb8) contains
the proximity, tip and button info:
(byte0 & 0x1) true = tip pressed
(byte0 & 0x2) true = button pressed
(byte0 & 0x40) false = pen in proximity of tablet.
The next 4 bytes are used for coordinates xl, xh, yl, yh (7 bits valid).
Only absolute coordinates are returned, so we use the following approach:
we store the last coordinates sent when the pen went out of the tablet,
*
*/
typedef enum {
S_IDLE, S_PROXY, S_FIRST, S_DOWN, S_UP
} k_status ;
static int
kidspad(u_char rxc, mousestatus_t *act)
{
static int buf[5];
static int buflen = 0, b_prev = 0 , x_prev = -1, y_prev = -1 ;
static k_status status = S_IDLE ;
static struct timeval old, now ;
2001-06-24 23:41:57 +00:00
int x, y ;
if (buflen > 0 && (rxc & 0x80)) {
fprintf(stderr, "invalid code %d 0x%x\n", buflen, rxc);
buflen = 0 ;
}
if (buflen == 0 && (rxc & 0xb8) != 0xb8) {
fprintf(stderr, "invalid code 0 0x%x\n", rxc);
return 0 ; /* invalid code, no action */
}
buf[buflen++] = rxc ;
if (buflen < 5)
return 0 ;
buflen = 0 ; /* for next time... */
x = buf[1]+128*(buf[2] - 7) ;
if (x < 0) x = 0 ;
y = 28*128 - (buf[3] + 128* (buf[4] - 7)) ;
if (y < 0) y = 0 ;
x /= 8 ;
y /= 8 ;
act->flags = 0 ;
act->obutton = act->button ;
act->dx = act->dy = act->dz = 0 ;
gettimeofday(&now, NULL);
if (buf[0] & 0x40) /* pen went out of reach */
status = S_IDLE ;
else if (status == S_IDLE) { /* pen is newly near the tablet */
act->flags |= MOUSE_POSCHANGED ; /* force update */
status = S_PROXY ;
x_prev = x ;
y_prev = y ;
}
old = now ;
act->dx = x - x_prev ;
act->dy = y - y_prev ;
if (act->dx || act->dy)
act->flags |= MOUSE_POSCHANGED ;
x_prev = x ;
y_prev = y ;
if (b_prev != 0 && b_prev != buf[0]) { /* possibly record button change */
act->button = 0 ;
if (buf[0] & 0x01) /* tip pressed */
act->button |= MOUSE_BUTTON1DOWN ;
if (buf[0] & 0x02) /* button pressed */
act->button |= MOUSE_BUTTON2DOWN ;
act->flags |= MOUSE_BUTTONSCHANGED ;
}
b_prev = buf[0] ;
return act->flags ;
}
2005-04-13 07:25:45 +00:00
static int
gtco_digipad (u_char rxc, mousestatus_t *act)
{
static u_char buf[5];
static int buflen = 0, b_prev = 0 , x_prev = -1, y_prev = -1 ;
static k_status status = S_IDLE ;
int x, y;
#define GTCO_HEADER 0x80
#define GTCO_PROXIMITY 0x40
#define GTCO_START (GTCO_HEADER|GTCO_PROXIMITY)
#define GTCO_BUTTONMASK 0x3c
if (buflen > 0 && ((rxc & GTCO_HEADER) != GTCO_HEADER)) {
fprintf(stderr, "invalid code %d 0x%x\n", buflen, rxc);
buflen = 0 ;
}
if (buflen == 0 && (rxc & GTCO_START) != GTCO_START) {
fprintf(stderr, "invalid code 0 0x%x\n", rxc);
return 0 ; /* invalid code, no action */
}
buf[buflen++] = rxc ;
if (buflen < 5)
return 0 ;
buflen = 0 ; /* for next time... */
x = ((buf[2] & ~GTCO_START) << 6 | (buf[1] & ~GTCO_START));
y = 4768 - ((buf[4] & ~GTCO_START) << 6 | (buf[3] & ~GTCO_START));
x /= 2.5;
y /= 2.5;
act->flags = 0 ;
act->obutton = act->button ;
act->dx = act->dy = act->dz = 0 ;
if ((buf[0] & 0x40) == 0) /* pen went out of reach */
status = S_IDLE ;
else if (status == S_IDLE) { /* pen is newly near the tablet */
act->flags |= MOUSE_POSCHANGED ; /* force update */
status = S_PROXY ;
x_prev = x ;
y_prev = y ;
}
act->dx = x - x_prev ;
act->dy = y - y_prev ;
if (act->dx || act->dy)
act->flags |= MOUSE_POSCHANGED ;
x_prev = x ;
y_prev = y ;
/* possibly record button change */
if (b_prev != 0 && b_prev != buf[0]) {
act->button = 0 ;
if (buf[0] & 0x04) /* tip pressed/yellow */
act->button |= MOUSE_BUTTON1DOWN ;
if (buf[0] & 0x08) /* grey/white */
act->button |= MOUSE_BUTTON2DOWN ;
if (buf[0] & 0x10) /* black/green */
act->button |= MOUSE_BUTTON3DOWN ;
if (buf[0] & 0x20) /* tip+grey/blue */
act->button |= MOUSE_BUTTON4DOWN ;
act->flags |= MOUSE_BUTTONSCHANGED ;
}
b_prev = buf[0] ;
return act->flags ;
}
2003-11-13 08:26:29 +00:00
static void
mremote_serversetup()
{
struct sockaddr_un ad;
/* Open a UNIX domain stream socket to listen for mouse remote clients */
2003-11-13 08:26:29 +00:00
unlink(_PATH_MOUSEREMOTE);
if ((rodent.mremsfd = socket(AF_UNIX, SOCK_STREAM, 0)) < 0)
logerrx(1, "unable to create unix domain socket %s",_PATH_MOUSEREMOTE);
umask(0111);
2003-11-13 08:26:29 +00:00
bzero(&ad, sizeof(ad));
ad.sun_family = AF_UNIX;
strcpy(ad.sun_path, _PATH_MOUSEREMOTE);
#ifndef SUN_LEN
#define SUN_LEN(unp) (((char *)(unp)->sun_path - (char *)(unp)) + \
strlen((unp)->path))
#endif
2003-11-13 08:26:29 +00:00
if (bind(rodent.mremsfd, (struct sockaddr *) &ad, SUN_LEN(&ad)) < 0)
logerrx(1, "unable to bind unix domain socket %s", _PATH_MOUSEREMOTE);
listen(rodent.mremsfd, 1);
}
2003-11-13 08:26:29 +00:00
static void
mremote_clientchg(int add)
{
struct sockaddr_un ad;
int ad_len, fd;
if (rodent.rtype != MOUSE_PROTO_X10MOUSEREM)
return;
if (add) {
/* Accept client connection, if we don't already have one */
ad_len = sizeof(ad);
fd = accept(rodent.mremsfd, (struct sockaddr *) &ad, &ad_len);
if (fd < 0)
logwarnx("failed accept on mouse remote socket");
if (rodent.mremcfd < 0) {
rodent.mremcfd = fd;
debug("remote client connect...accepted");
}
else {
close(fd);
debug("another remote client connect...disconnected");
}
}
else {
/* Client disconnected */
debug("remote client disconnected");
close(rodent.mremcfd);
rodent.mremcfd = -1;
}
}