d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c86f0c7a71
freebsd-skq/release/sysinstall/menus.c

834 lines
38 KiB
C
Raw Normal View History

Here is my first "framework" commit of the new sysinstall. There is a LOT more to come in the next 24 hours, this is just the first stable result of 8 hours of hacking so far. The specification format for menus is pretty much hammered out and the beginnings (very humble) of the doc hierarchy are present for an example. It should be quite easy to add a lot more menus quickly to this since I did go somewhat out of my way to make the framework easy to work with. This is NOT the glorious semi-graphical sysinstall (or whatever its name will be) that the install-geeks are working on, this is simply the "son of sysinstall" I've been promising to write in the interim for 2.0.5 and 2.1R (super install doesn't come until 2.2R).
1995-04-27 12:50:35 +00:00
/*
* The new sysinstall program.
*
* This is probably the last program in the `sysinstall' line - the next
* generation being essentially a complete rewrite.
*
NFS installation was broken - try to fix it.
1995-05-30 05:13:24 +00:00
* $Id: menus.c,v 1.39 1995/05/29 11:58:16 jkh Exp $
Here is my first "framework" commit of the new sysinstall. There is a LOT more to come in the next 24 hours, this is just the first stable result of 8 hours of hacking so far. The specification format for menus is pretty much hammered out and the beginnings (very humble) of the doc hierarchy are present for an example. It should be quite easy to add a lot more menus quickly to this since I did go somewhat out of my way to make the framework easy to work with. This is NOT the glorious semi-graphical sysinstall (or whatever its name will be) that the install-geeks are working on, this is simply the "son of sysinstall" I've been promising to write in the interim for 2.0.5 and 2.1R (super install doesn't come until 2.2R).
1995-04-27 12:50:35 +00:00
*
* Copyright (c) 1995
* Jordan Hubbard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* verbatim and that no modifications are made prior to this
* point in the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Jordan Hubbard
* for the FreeBSD Project.
* 4. The name of Jordan Hubbard or the FreeBSD project may not be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY JORDAN HUBBARD ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL JORDAN HUBBARD OR HIS PETS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, LIFE OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include "sysinstall.h"
/* All the system menus go here.
*
* Hardcoded things like version number strings will disappear from
* these menus just as soon as I add the code for doing inline variable
* expansion.
*/
o Add extra menu types (radio implemented, multiple choice shortly). o Make the framework generally more robust. o Figured out how to nest the menu descriptions - no more grotty initialization of menus. o Fix bug with helpline and helpfile not being reset. o Add stubs for the media selection code. Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
1995-04-29 19:33:06 +00:00
/* The initial installation menu */
Here is my first "framework" commit of the new sysinstall. There is a LOT more to come in the next 24 hours, this is just the first stable result of 8 hours of hacking so far. The specification format for menus is pretty much hammered out and the beginnings (very humble) of the doc hierarchy are present for an example. It should be quite easy to add a lot more menus quickly to this since I did go somewhat out of my way to make the framework easy to work with. This is NOT the glorious semi-graphical sysinstall (or whatever its name will be) that the install-geeks are working on, this is simply the "son of sysinstall" I've been promising to write in the interim for 2.0.5 and 2.1R (super install doesn't come until 2.2R).
1995-04-27 12:50:35 +00:00
DMenu MenuInitial = {
o Add extra menu types (radio implemented, multiple choice shortly). o Make the framework generally more robust. o Figured out how to nest the menu descriptions - no more grotty initialization of menus. o Fix bug with helpline and helpfile not being reset. o Add stubs for the media selection code. Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
1995-04-29 19:33:06 +00:00
DMENU_NORMAL_TYPE,
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
"Welcome to FreeBSD 2.0.5!", /* title */
"This is the main menu of the FreeBSD installation system. Please\n\
Here is my first "framework" commit of the new sysinstall. There is a LOT more to come in the next 24 hours, this is just the first stable result of 8 hours of hacking so far. The specification format for menus is pretty much hammered out and the beginnings (very humble) of the doc hierarchy are present for an example. It should be quite easy to add a lot more menus quickly to this since I did go somewhat out of my way to make the framework easy to work with. This is NOT the glorious semi-graphical sysinstall (or whatever its name will be) that the install-geeks are working on, this is simply the "son of sysinstall" I've been promising to write in the interim for 2.0.5 and 2.1R (super install doesn't come until 2.2R).
1995-04-27 12:50:35 +00:00
select one of the options below by using the arrow keys or typing the\n\
first character of the option name you're interested in. Invoke an\n\
Everything but the partition editor is done. This commit is for MBR testing.
1995-05-04 23:36:23 +00:00
option by pressing enter. If you'd like a shell, press ESC", /* prompt */
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
"Press F1 for usage instructions", /* help line */
"usage.hlp", /* help file */
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ { "Usage", "Quick start - How to use this menu system.", /* U */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_DISPLAY_FILE, "usage.hlp", 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Doc", "More detailed documentation on FreeBSD.", /* D */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SUBMENU, &MenuDocumentation, 0, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "Language", "Set your preferred language.", /* L */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SUBMENU, &MenuOptionsLanguage, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Options", "Select various options for this utility.", /* O */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SUBMENU, &MenuOptions, 0, 0 },
Commit my latest so that Gary can sync up - this version should also be the grounds for our first round of testing in the release I'm rolling. It doesn't load the distributions yet, but it should do everything else.
1995-05-17 14:40:00 +00:00
{ "Proceed", "Go to the installation menu", /* P */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SUBMENU, &MenuInstall, 0, 0 },
This doesn't work - the extract code is half-baked. I commit it only so that Gary can sync to it before I go to bed.. :)
1995-05-20 00:13:14 +00:00
{ "Quit", "Exit this installation utility", /* Q */
DMENU_CANCEL, NULL, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
};
o Add extra menu types (radio implemented, multiple choice shortly). o Make the framework generally more robust. o Figured out how to nest the menu descriptions - no more grotty initialization of menus. o Fix bug with helpline and helpfile not being reset. o Add stubs for the media selection code. Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
1995-04-29 19:33:06 +00:00
/* The main documentation menu */
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
DMenu MenuDocumentation = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_NORMAL_TYPE,
"Documentation for FreeBSD 2.0.5", /* Title */
"If you are at all unsure about the configuration of your hardware\n\
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
or are looking to build a system specifically for FreeBSD, read the\n\
Hardware guide! New users should also read the Install document for\n\
a step-by-step tutorial on installing FreeBSD. For general information,\n\
consult the README file. If you're having other problems, you may find\n\
answers in the FAQ.",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
"Confused? Press F1 for help.",
"usage.hlp", /* help file */
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ { "README", "Read this for a general description of FreeBSD", /* R */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_DISPLAY_FILE, "README", 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Hardware", "The FreeBSD survival guide for PC hardware.", /* H */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_DISPLAY_FILE, "hardware.hlp", 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Install", "A step-by-step guide to installing FreeBSD.", /* I */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_DISPLAY_FILE, "install.hlp", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Copyright", "The FreeBSD Copyright notices.", /* C */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_DISPLAY_FILE, "COPYRIGHT", 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Release", "The release notes for this version of FreeBSD.", /* R */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_DISPLAY_FILE, "RELNOTES", 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "FAQ", "Frequently Asked Questions about FreeBSD.", /* F */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_DISPLAY_FILE, "faq.hlp", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
};
o Add extra menu types (radio implemented, multiple choice shortly). o Make the framework generally more robust. o Figured out how to nest the menu descriptions - no more grotty initialization of menus. o Fix bug with helpline and helpfile not being reset. o Add stubs for the media selection code. Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
1995-04-29 19:33:06 +00:00
/*
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
* The language selection menu.
*
o Add extra menu types (radio implemented, multiple choice shortly). o Make the framework generally more robust. o Figured out how to nest the menu descriptions - no more grotty initialization of menus. o Fix bug with helpline and helpfile not being reset. o Add stubs for the media selection code. Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
1995-04-29 19:33:06 +00:00
* Note: The RADIO menus use a slightly different syntax. If an item
* name starts with `*', it's considered to be "ON" by default,
* otherwise off.
*/
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMenu MenuOptionsLanguage = {
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Natural language selection", /* title */
"Please specify the language you'd like to use by default.\n\n\
Commit my latest changes before having a nap. Still not close to done, nor is it in sync with my working sources, but it leaves me less CVS hassles to bring in the new files at this time. Still no documentation to translate quite yet, but soon. This stuff is actually very close now.
1995-05-01 21:56:32 +00:00
While almost all of the system's documentation is still written\n\
in english (and may never be translated), there are a few guides\n\
and types of system documentation that may be written in your\n\
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
preferred language. When such are found, they will be used instead\n\
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
of the english versions. This feature is nonetheless considered\n\
to be in experimental status at this time.", /* prompt */
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
"Press F1 for more information", /* help line */
"language.hlp", /* help file */
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ { "Danish", "Danish language and character set (ISO-8859-1)", /* D */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_Danish, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Dutch", "Dutch language and character set (ISO-8859-1)", /* D */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_Dutch, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "English", "English language (system default)", /* E */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_English, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "French", "French language and character set (ISO-8859-1)", /* F */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_French, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "German", "German language and character set (ISO-8859-1)", /* G */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_German, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Italian", "Italian language and character set (ISO-8859-1)", /* I */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_Italian, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Japanese", "Japanese language and default character set (romaji)", /* J */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_Japanese, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Norwegian", "Norwegian language and character set (ISO-8859-1)", /* N */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_Norwegian, 0, 0},
1. Add MBR type menu to take it off of Poul's "gripe sheet". 2. Syntax correction from Andrey. Good night! :-)
1995-05-20 20:30:12 +00:00
{ "Russian", "Russian language and character set (KOI8-R)", /* R */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_Russian, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Spanish", "Spanish language and character set (ISO-8859-1)", /* S */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_Spanish, 0, 0 },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
{ "Swedish", "Swedish language and character set (ISO-8859-1)", /* S */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, lang_set_Swedish, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Perform a much needed tidying-up pass over this code. Sleep for now, more tomorrow.
1995-05-08 10:20:56 +00:00
};
DMenu MenuMediaCDROM = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Choose a CDROM type",
"FreeBSD can be installed directly from a CDROM containing a valid\n\
This doesn't work - the extract code is half-baked. I commit it only so that Gary can sync to it before I go to bed.. :)
1995-05-20 00:13:14 +00:00
FreeBSD 2.0.5 distribution. If you are seeing this menu it's because\n\
more than one CDROM drive on your system was found. Please select one\n\
of the following CDROM drives as your installation drive.",
"Press F1 to read the installation guide",
"install.hlp",
{ { NULL } },
Perform a much needed tidying-up pass over this code. Sleep for now, more tomorrow.
1995-05-08 10:20:56 +00:00
};
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
DMenu MenuMediaFloppy = {
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Choose a Floppy drive",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
"You have more than one floppy drive. Please chose the floppy\n\
drive you'd like to use for this operation",
NULL,
NULL,
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ { NULL } },
};
DMenu MenuMediaDOS = {
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Choose a DOS partition",
"FreeBSD can be installed directly from a DOS partition,\n\
assuming of course that you've copied the relevant distributions\n\
into your DOS partition before starting this installation. If\n\
such is not the case, then you should reboot DOS at this time\n\
and copy the distributions you want to install into a subdirectory\n\
on one of your DOS partitions. Otherwise, please select the\n\
DOS partition containing the FreeBSD distribution files.",
"Press F1 to read the installation guide",
"install.hlp",
1. Fix a pathological bug I introduced in msgInfo(). Right idea, wrong implementation. 2. Totally rework device registration. It's about half the size and more powerful now. 3. Add DOS discovery. 4. Start filling in some of the strategy routines. 5. Another clean-up pass over the menus. 6. Make wizard code use Disk typedef. If I can get the first strategy routine finished tonite, we should have a working install (from ftp, at least) this weekend.
1995-05-20 10:33:14 +00:00
{ { NULL } },
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
};
Perform a much needed tidying-up pass over this code. Sleep for now, more tomorrow.
1995-05-08 10:20:56 +00:00
DMenu MenuMediaFTP = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Please specify an FTP site",
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
"FreeBSD is distributed from a number of sites on the Internet. Please\n\
select the site closest to you or \"other\" if you'd like to specify another\n\
choice. Also note that not all sites carry every possible distribution!\n\
Commit my latest so that Gary can sync up - this version should also be the grounds for our first round of testing in the release I'm rolling. It doesn't load the distributions yet, but it should do everything else.
1995-05-17 14:40:00 +00:00
Distributions other than the basic user set are only guaranteed to be\n\
available from the Primary site.\n\n\
If the first site selected doesn't respond, try one of the alternates.\n\
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
You may also wish to investigate the Ftp options menu in case of trouble.\n\
To specify a URL not in this list, chose \"other\".",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
"Select a site that's close!",
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
"install.hlp",
{ { "Primary Site", "ftp.freebsd.org",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.freebsd.org/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "Secondary Site", "freefall.cdrom.com",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://freefall.cdrom.com/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
Add a final configuration menu and the beginnings of the backing code for it. The ftp installation method is working well enough to test. Many more bug fixes, says Gary.
1995-05-24 01:27:15 +00:00
{ "Other", "Specify some other ftp site by URL",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=other", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Australia", "ftp.physics.usyd.edu.au",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.physics.usyd.edu.au/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Finland", "nic.funet.fi",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://nic.funet.fi/pub/unix/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "France", "ftp.ibp.fr",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.ibp.fr/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Germany", "ftp.uni-duisburg.de",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.uni-duisburg.de/pub/unix/FreeBSD/2.0.5-ALPHA", 0, },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Israel", "orgchem.weizmann.ac.il",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://orgchem.weizmann.ac.il/pub/FreeBSD-2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Japan", "ftp.sra.co.jp",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.sra.co.jp/pub/os/FreeBSD/distribution/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "Japan #2", "ftp.mei.co.jp",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.mei.co.jp/free/PC-UNIX/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "Japan #3", "ftp.waseda.ac.jp",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.waseda.ac.jp/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "Japan #4", "ftp.pu-toyama.ac.jp",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.pu-toyama.ac.jp/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "Japan #5", "ftpsv1.u-aizu.ac.jp",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftpsv1.u-aizu.ac.jp/pub/os/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "Japan #6", "tutserver.tutcc.tut.ac.jp",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://tutserver.tutcc.tut.ac.jp/FreeBSD/FreeBSD-2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "Japan #7", "ftp.ee.uec.ac.jp",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.ee.uec.ac.jp/pub/os/FreeBSD.other/FreeBSD-2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Korea", "ftp.cau.ac.kr",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.cau.ac.kr/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Netherlands", "ftp.nl.net",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.nl.net/pub/os/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Russia", "ftp.kiae.su",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.kiae.su/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Sweden", "ftp.luth.se",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.luth.se/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Taiwan", "netbsd.csie.nctu.edu.tw",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://netbsd.csie.nctu.edu.tw/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Thailand", "ftp.nectec.or.th",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.nectec.or.th/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "UK", "ftp.demon.co.uk",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.demon.co.uk/pub/BSD/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "UK #2", "src.doc.ic.ac.uk",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://src.doc.ic.ac.uk/packages/unix/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "UK #3", "unix.hensa.ac.uk",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://unix.hensa.ac.uk/pub/walnut.creek/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "USA", "ref.tfs.com",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ref.tfs.com/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "USA #2", "ftp.dataplex.net",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.dataplex.net/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "USA #3", "kryten.atinc.com",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://kryten.atinc.com/pub/FreeBSD/2.0.5-ALPHA", 0, 0 },
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ "USA #4", "ftp.neosoft.com",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftp=ftp://ftp.neosoft.com/systems/FreeBSD/2.0.5-ALPHA", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } }
Here is my first "framework" commit of the new sysinstall. There is a LOT more to come in the next 24 hours, this is just the first stable result of 8 hours of hacking so far. The specification format for menus is pretty much hammered out and the beginnings (very humble) of the doc hierarchy are present for an example. It should be quite easy to add a lot more menus quickly to this since I did go somewhat out of my way to make the framework easy to work with. This is NOT the glorious semi-graphical sysinstall (or whatever its name will be) that the install-geeks are working on, this is simply the "son of sysinstall" I've been promising to write in the interim for 2.0.5 and 2.1R (super install doesn't come until 2.2R).
1995-04-27 12:50:35 +00:00
};
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
DMenu MenuMediaTape = {
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Choose a tape drive type",
"FreeBSD can be installed from tape drive, though this installation\n\
method requires a certain amount of temporary storage in addition\n\
to the space required by the distribution itself (tape drives make\n\
poor random-access devices, so we extract _everything_ on the tape\n\
in one pass). If you have sufficient space for this, then you should\n\
select one of the following tape devices detected on your system.",
"Press F1 to read the installation guide",
"install.hlp",
{ { NULL } },
};
DMenu MenuNetworkDevice = {
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Choose a network interface type",
Try AGAIN to get the disklabel editor to do the right thing. This is getting ridiculous. I may have to put the clear() back and take the performance penalty, Poul. Tweak the TCP/IP setup menu to look a little nicer. Add lp0 to the list of available network devices (it was found before but simply not described properly).
1995-05-21 18:24:34 +00:00
"FreeBSD can be installed directly over a network, using NFS or FTP.\n
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
If you are using PPP over a serial device (cuaa0 or cuaa1) as opposed\n\
to a direct ethernet connection, then you may need to first dial your\n\
service provider using a special utility we provide for that purpose.\n\
You can also install over a parallel port using a special \"laplink\"\n\
cable, though this only works if you have another FreeBSD machine running\n\
a fairly recent (2.0R or later) release to talk to.\n\n\
Put back some changes that were smashed in yesterday's release tree shoot-down.
1995-05-25 01:22:20 +00:00
To use PPP select one of the serial devices, otherwise select lp0 for\n\
Try AGAIN to get the disklabel editor to do the right thing. This is getting ridiculous. I may have to put the clear() back and take the performance penalty, Poul. Tweak the TCP/IP setup menu to look a little nicer. Add lp0 to the list of available network devices (it was found before but simply not described properly).
1995-05-21 18:24:34 +00:00
the parallel port or one of the ethernet controllers (if you have one)\n\
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
for an ethernet installation.",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
"Press F1 to read network configuration manual",
"network_device.hlp",
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
{ { NULL } },
};
o Add extra menu types (radio implemented, multiple choice shortly). o Make the framework generally more robust. o Figured out how to nest the menu descriptions - no more grotty initialization of menus. o Fix bug with helpline and helpfile not being reset. o Add stubs for the media selection code. Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
1995-04-29 19:33:06 +00:00
/* The media selection menu */
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
DMenu MenuMedia = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Choose Installation Media",
"FreeBSD can be installed from a variety of different installation\n\
Commit my latest changes before having a nap. Still not close to done, nor is it in sync with my working sources, but it leaves me less CVS hassles to bring in the new files at this time. Still no documentation to translate quite yet, but soon. This stuff is actually very close now.
1995-05-01 21:56:32 +00:00
media, ranging from floppies to the Internet. If you're installing\n\
FreeBSD from a supported CDROM drive then this is generally the best\n\
method to use unless you have some overriding reason for using another\n\
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
method.",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
"Press F1 for more information on the various media types",
"media.hlp",
{ { "CDROM", "Install from a FreeBSD CDROM",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, mediaSetCDROM, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "DOS", "Install from a DOS partition",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, mediaSetDOS, 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "File System", "Install from a mounted filesystem",
DMENU_CALL, mediaSetUFS, 0, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "Floppy", "Install from a floppy disk set",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, mediaSetFloppy, 0, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "FTP", "Install from an Internet FTP server",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, mediaSetFTP, 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "NFS", "Install over NFS",
DMENU_CALL, mediaSetNFS, 0, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "Tape", "Install from SCSI or QIC tape",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, mediaSetTape, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
};
o Add extra menu types (radio implemented, multiple choice shortly). o Make the framework generally more robust. o Figured out how to nest the menu descriptions - no more grotty initialization of menus. o Fix bug with helpline and helpfile not being reset. o Add stubs for the media selection code. Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
1995-04-29 19:33:06 +00:00
/* The installation type menu */
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
DMenu MenuInstallType = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Choose Installation Type",
Commit my latest so that Gary can sync up - this version should also be the grounds for our first round of testing in the release I'm rolling. It doesn't load the distributions yet, but it should do everything else.
1995-05-17 14:40:00 +00:00
"As a convenience, we provide several \"canned\" installation types.\n\
These select what we consider to be the most reasonable defaults for the\n\
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
type of system in question. If you would prefer to pick and choose\n\
Commit my latest so that Gary can sync up - this version should also be the grounds for our first round of testing in the release I'm rolling. It doesn't load the distributions yet, but it should do everything else.
1995-05-17 14:40:00 +00:00
the list of distributions yourself, simply select \"custom\".",
Add a bunch of missing help files.
1995-05-29 11:58:16 +00:00
NULL,
NULL,
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
{ { "Developer", "Full sources, binaries and doc but no games [171MB]",
DMENU_CALL, distSetDeveloper, 0, 0 },
{ "X-Developer", "Same as above, but includes XFree86 [196MB]",
DMENU_CALL, distSetXDeveloper, 0, 0 },
{ "User", "Average user - binaries and doc but no sources [19MB]",
DMENU_CALL, distSetUser, 0, 0 },
{ "X-User", "Same as above, but includes XFree86 [45MB]",
DMENU_CALL, distSetXUser, 0, 0 },
{ "Minimal", "The smallest configuration possible [15MB]",
DMENU_CALL, distSetMinimum, 0, 0 },
{ "Everything", "All sources, binaries and XFree86 binaries [203MB]",
DMENU_CALL, distSetEverything, 0, 0 },
{ "Custom", "Specify your own distribution set [?]",
DMENU_SUBMENU, &MenuDistributions, 0, 0 },
Bring in all my fixes to Poul's gripe list as of last night.
1995-05-25 18:48:33 +00:00
{ "Reset", "Reset selected distribution list to None",
DMENU_CALL, distReset, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Commit my latest changes before having a nap. Still not close to done, nor is it in sync with my working sources, but it leaves me less CVS hassles to bring in the new files at this time. Still no documentation to translate quite yet, but soon. This stuff is actually very close now.
1995-05-01 21:56:32 +00:00
};
DMenu MenuDistributions = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_MULTIPLE_TYPE | DMENU_SELECTION_RETURNS,
"Select the distributions you wish to install.",
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
"Please check off the distributions you wish to install. Some\n
of the most generally useful distributions are already checked, and\n\
selecting OK at this stage will chose them as defaults.",
Add a bunch of missing help files.
1995-05-29 11:58:16 +00:00
NULL,
NULL,
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
{ { "*bin", "Binary base distribution (required) [36MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_BIN, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "commercial", "Commercial demos and shareware [10MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_COMMERCIAL, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "compat1x", "FreeBSD 1.x binary compatability package [2MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_COMPAT1X, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "compat20", "FreeBSD 2.0 binary compatability package [2MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_COMPAT20, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "DES", "DES encryption code and sources [.3MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_DES, 0 },
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
{ "dict", "Spelling checker disctionary files [4.2MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_DICT, 0 },
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
{ "games", "Games and other amusements (non-commercial) [6.4MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_GAMES, 0 },
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
{ "info", "GNU info files [4.1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_INFO, 0 },
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
{ "*man", "System manual pages - strongly recommended [3.3MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_MANPAGES, 0 },
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
{ "proflibs", "Profiled versions of the libraries [3.3MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &Dists, DIST_PROFLIBS, 0 },
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
{ "src", "Sources for everything but DES [120MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, distSetSrc, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "XFree86", "The XFree86 3.1.1L distribution [?]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SUBMENU, &MenuXF86Select, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
};
DMenu MenuSrcDistributions = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_MULTIPLE_TYPE | DMENU_SELECTION_RETURNS,
"Select the sub-components of src you wish to install.",
"Please check off those portions of the FreeBSD source tree\n\
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
you wish to install.",
Add a bunch of missing help files.
1995-05-29 11:58:16 +00:00
NULL,
NULL,
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ { "base", "top-level files in /usr/src [300K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_BASE, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "gnu", "/usr/src/gnu (software from the GNU Project) [42MB]]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_GNU, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "etc", "/usr/src/etc (miscellaneous system files) [460K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_ETC, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "games", "/usr/src/games (diversions) [7.8MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_GAMES, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "include", "/usr/src/include (header files) [467K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_INCLUDE, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "lib", "/usr/src/lib (system libraries) [9.2MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_LIB, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "libexec", "/usr/src/libexec (system programs) [1.2MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_LIBEXEC, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "lkm", "/usr/src/lkm (Loadable Kernel Modules) [193K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_LKM, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "release", "/usr/src/release (release-generation tools) [533K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_RELEASE, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "sbin", "/usr/src/sbin (system binaries) [1.3MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_SBIN, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "share", "/usr/src/share (documents and shared files) [10MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_SHARE, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "sys", "/usr/src/sys (FreeBSD kernel) [13MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_SYS, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "ubin", "/usr/src/usr.bin (user binaries) [13MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_UBIN, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "usbin", "/usr/src/usr.sbin (aux system binaries) [14MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_USBIN, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "XFree86", "XFree86 3.1.1L source + contrib distribution [200MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &SrcDists, DIST_SRC_XF86, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
};
DMenu MenuXF86Select = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_NORMAL_TYPE,
"XFree86 3.1.1u1 Distribution",
"Please select the components you need from the XFree86 3.1.1u1\n\
Commit my latest so that Gary can sync up - this version should also be the grounds for our first round of testing in the release I'm rolling. It doesn't load the distributions yet, but it should do everything else.
1995-05-17 14:40:00 +00:00
distribution. We recommend that you select what you need from the basic\n\
components set and at least one entry from the Server and Font set menus.\n\n\
When you're finished, select Cancel.",
"Press F1 to read the XFree86 release notes for FreeBSD",
Add a bunch of missing help files.
1995-05-29 11:58:16 +00:00
"XF86.hlp",
Commit my latest so that Gary can sync up - this version should also be the grounds for our first round of testing in the release I'm rolling. It doesn't load the distributions yet, but it should do everything else.
1995-05-17 14:40:00 +00:00
{ { "Basic", "Basic component menu (required)",
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
DMENU_SUBMENU, &MenuXF86SelectCore, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Server", "X server menu",
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
DMENU_SUBMENU, &MenuXF86SelectServer, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Fonts", "Font set menu",
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
DMENU_SUBMENU, &MenuXF86SelectFonts, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
};
DMenu MenuXF86SelectCore = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_MULTIPLE_TYPE | DMENU_SELECTION_RETURNS,
"XFree86 3.1.1 base distribution types",
"Please check off the basic XFree86 components you wish to install.\n\
First round of changes after testing this on actual systems. Clean up some of the badly displayed menus, use the proper notification box for messages, make proceed work.
1995-05-11 06:10:56 +00:00
Those deemed most generally useful are already checked off for you.",
Add a bunch of missing help files.
1995-05-29 11:58:16 +00:00
"Press F1 to read the XFree86 release notes for FreeBSD",
"XF86.hlp",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ { "*bin", "X client applications and shared libs [4MB].",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_BIN, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "*lib", "Data files needed at runtime [600K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_LIB, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "xicf", "Customizable xinit runtime configuration file [100K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_XINIT, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "xdcf", "Customizable xdm runtime configuration file [100K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_XDMCF, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "doc", "READMEs and XFree86 specific man pages [500K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_DOC, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "*man", "Man pages (except XFree86 specific ones) [1.2MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_MAN, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "prog", "Programmer's header and library files [4MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_PROG, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "link", "X Server reconfiguration kit [7.8MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_LINK, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "pex", "PEX fonts and libs needed by PEX apps [500K]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86Dists, DIST_XF86_PEX, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
};
DMenu MenuXF86SelectFonts = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_MULTIPLE_TYPE | DMENU_SELECTION_RETURNS,
"Font distribution selection.",
"Please check off the individual font distributions you wish to\n\
Correct a few wording bogons in the menus. Make notify NOT wipe the dialog off right after putting it up. Whoops. Kinda defeated the purpose! :-)
1995-05-20 07:50:20 +00:00
install. At the minimum, you should install the standard\n\
75 DPI and misc fonts if you're also installing a server\n\
(these are selected by default).",
Add a bunch of missing help files.
1995-05-29 11:58:16 +00:00
"Press F1 to read the XFree86 release notes for FreeBSD",
"XF86.hlp",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ { "*fnts", "Standard 75 DPI and miscellaneous fonts [3.6MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86FontDists, DIST_XF86_FONTS_MISC, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "f100", "100 DPI fonts [1.8MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86FontDists, DIST_XF86_FONTS_100, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "fscl", "Speedo and Type scalable fonts [1.6MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86FontDists, DIST_XF86_FONTS_SCALE, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "non", "Japanese, Chinese and other non-english fonts [3.3MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86FontDists, DIST_XF86_FONTS_NON, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "server", "Font server [0.3MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86FontDists, DIST_XF86_FONTS_SERVER, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
};
DMenu MenuXF86SelectServer = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_MULTIPLE_TYPE | DMENU_SELECTION_RETURNS,
"X Server selection.",
"Please check off the types of X servers you wish to install.\n\
Correct a few wording bogons in the menus. Make notify NOT wipe the dialog off right after putting it up. Whoops. Kinda defeated the purpose! :-)
1995-05-20 07:50:20 +00:00
If you are unsure as to which server will work for your graphics card,\n\
First round of changes after testing this on actual systems. Clean up some of the badly displayed menus, use the proper notification box for messages, make proceed work.
1995-05-11 06:10:56 +00:00
it is recommended that try the SVGA or VGA16 servers (the VGA16 and\n\
Correct a few wording bogons in the menus. Make notify NOT wipe the dialog off right after putting it up. Whoops. Kinda defeated the purpose! :-)
1995-05-20 07:50:20 +00:00
Mono servers are particularly well-suited to most LCD displays).",
Add a bunch of missing help files.
1995-05-29 11:58:16 +00:00
"Press F1 to read the XFree86 release notes for FreeBSD",
"XF86.hlp",
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ { "*SVGA", "Standard VGA or Super VGA display [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_SVGA, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "VGA16", "Standard 16 color VGA display [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_VGA16, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "Mono", "Standard Monochrome display [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_MONO, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "8514", "8-bit (256 color) IBM 8514 or compatible card [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_8514, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "AGX", "8-bit AGX card [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_AGX, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "Mch3", "8 and 16-bit (65K color) for ATI Mach32 card [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_MACH32, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "Mch8", "8-bit ATI Mach8 card [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_MACH8, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "P9K", "8, 16, and 24-bit color for Weitek P9000 based boards [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_P9000, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "S3", "8, 16 and 24-bit color for S3 based boards [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_S3, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "W32", "8-bit Color for ET4000/W32, /W32i and /W32p cards [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_W32, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "nest", "A nested server for testing purposes [1MB]",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_FLAG, &XF86ServerDists, DIST_XF86_SERVER_NEST, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
};
Commit my latest changes before having a nap. Still not close to done, nor is it in sync with my working sources, but it leaves me less CVS hassles to bring in the new files at this time. Still no documentation to translate quite yet, but soon. This stuff is actually very close now.
1995-05-01 21:56:32 +00:00
DMenu MenuDiskDevices = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_MULTIPLE_TYPE | DMENU_SELECTION_RETURNS,
"Select Drive(s)",
"Please select the drive, or drives, on which you wish to install\n\
Commit my latest changes before having a nap. Still not close to done, nor is it in sync with my working sources, but it leaves me less CVS hassles to bring in the new files at this time. Still no documentation to translate quite yet, but soon. This stuff is actually very close now.
1995-05-01 21:56:32 +00:00
FreeBSD. You need to select at least one drive containing some free\n\
space, though FreeBSD can be installed across several drives if you do\n\
not have the required space on a single drive. If you wish to boot\n\
My latest round of changes - make the "slices" editor work.
1995-05-04 03:51:22 +00:00
off a drive that's not a `zero drive', or have multiple operating\n\
systems on your machine, you will have the option to install a boot\n\
manager later.",
Add a bunch of missing help files.
1995-05-29 11:58:16 +00:00
"Press F1 for important information regarding geometry!",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
"drives.hlp",
{ { NULL } },
Perform a much needed tidying-up pass over this code. Sleep for now, more tomorrow.
1995-05-08 10:20:56 +00:00
};
/* The installation options menu */
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMenu MenuOptions = {
DMENU_NORMAL_TYPE,
"Choose Installation Options",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
"The following options control how this utility will deal\n\
with various possible error conditions and how verbose it will\n\
be at various stages.\n\n\
When you're done setting options, select Cancel",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
NULL,
NULL,
{ { "Ftp Options", "Ftp options menu",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SUBMENU, &MenuOptionsFTP, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "NFS Secure", "NFS server talks only on a secure port",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "nfsServerSecure=yes", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "NFS Slow", "User is using a slow PC or ethernet card",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "nfsSlowPC=yes", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "Extra Debugging", "Toggle the extra debugging flag",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "debug=yes", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ "No Debugging", "Turn the extra debugging flag off",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "debug=no", 0, 0 },
Commit parts of reorg that were diffs. Substantially re-engineer the extraction and mediaGetFTP() handshaking to solve some unexpected complexities.
1995-05-27 10:47:44 +00:00
{ "Yes To All", "Assume \"Yes\" answers to all non-critical dialogs",
DMENU_SET_VARIABLE, "noConfirmation=Yes", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Fold in all my recent changes. Do another clean-up pass over this, making the generic menu handler much more powerful (now handles multiple dispatch). A few more menus fleshed out and the beginnings of the distribution handler committed. Should be transfering full distributions over in the next commit.
1995-05-10 07:45:00 +00:00
};
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
DMenu MenuOptionsFTP = {
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"Choose FTP Options",
1. Start syncing up the network strategy code so that folks like Poul and Justin can see it. 2. Attempt to fix the redisplay problems in label.c some more. Not clearing the screen each time is certainly faster, but it's causing all sorts of problems.
1995-05-21 15:40:54 +00:00
"Please indicate how you would like FTP to deal with potential error\n\
conditions, the default behavior being to Abort on transfer errors. If you\n\
are behind an IP firewall, you will also probably wish to select passive\n\
mode transfers (it's generally OK to set this in any case as almost all\n\
servers support it, firewall or no).",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
NULL,
NULL,
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ { "FTP Retry", "On transfer failure, retry same host",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftpRetryType=loop", 0, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "FTP Reselect", "On transfer failure, ask for another host",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftpRetryType=reselect", 0, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "FTP Abort", "On transfer failure, abort installation",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftpRetryType=abort", 0, 0 },
1. Incorporate Nickolay's ammended patches for Russian screenmap support as per Andrey's letter. Make a few modifications for correctness. 2. Add Language menu back to first menu - it was too buried in the Options menu. 3. Add size information to all distributions. 4. Add a compat20 distribution (we need to make one of these!! Any takers? Please?) Submitted by: Nickolay N. Dudorov <nnd@gw.itfs.nsk.su> & jkh
1995-05-19 16:58:58 +00:00
{ "FTP passive", "Use \"passive mode\" for firewalled FTP",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "ftpPassive=yes", 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Commit my latest changes before having a nap. Still not close to done, nor is it in sync with my working sources, but it leaves me less CVS hassles to bring in the new files at this time. Still no documentation to translate quite yet, but soon. This stuff is actually very close now.
1995-05-01 21:56:32 +00:00
};
o Add extra menu types (radio implemented, multiple choice shortly). o Make the framework generally more robust. o Figured out how to nest the menu descriptions - no more grotty initialization of menus. o Fix bug with helpline and helpfile not being reset. o Add stubs for the media selection code. Coming next: Fdisk and disklabel screens using Phk's new libdisk stuff.
1995-04-29 19:33:06 +00:00
/* The main installation menu */
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
DMenu MenuInstall = {
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
DMENU_NORMAL_TYPE,
"Choose Installation Options", /* title */
Commit my latest so that Gary can sync up - this version should also be the grounds for our first round of testing in the release I'm rolling. It doesn't load the distributions yet, but it should do everything else.
1995-05-17 14:40:00 +00:00
"Before installation can continue, you need to specify a few\n\
details on the type of distribution you wish to have, where you wish\n\
Bring in all my fixes to Poul's gripe list as of last night.
1995-05-25 18:48:33 +00:00
to install it from and how you wish to allocate disk storage to FreeBSD.\n\n\
Commit my latest so that Gary can sync up - this version should also be the grounds for our first round of testing in the release I'm rolling. It doesn't load the distributions yet, but it should do everything else.
1995-05-17 14:40:00 +00:00
None of the items in this menu will actually modify the contents of\n\
Totally revamp the TCP/IP dialog; now network selection makes a bit more sense. Root floppy (which actually may be able to go completely away at some point soon!) is now loadable from ftp/nfs/dos as well as CDROM and (of course) floppy. Fix more problems on Poul's Gripe List.
1995-05-26 08:41:52 +00:00
your disk until you select the \"Install\" menu item (and even then, only\n\
Bring in all my fixes to Poul's gripe list as of last night.
1995-05-25 18:48:33 +00:00
after a final confirmation). Select Cancel to leave this menu.",
This will now compile and even scribble helpfully on your disks. It remains to be seen how successfully. The distribution loading code is still not here yet, but the partition/newfs/mount/cpio-extract cycle is as complete as it's ever going to get, modulo possible bug fixes. The TCP/IP setup screen is also sort of here, albeit in a highly-changing state due to the fact that per-interface information isn't being kept right now but is being added (thanks, Gary!).
1995-05-16 11:37:27 +00:00
"Press F1 to read the installation guide",
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
"install.hlp",
This should fix the last of the ftp path problems. It was all a bit more complex than it first looked.
1995-05-26 11:21:53 +00:00
{ { "Partition", "Allocate disk space for FreeBSD", /* P */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, diskPartitionEditor, 0, 0 },
1. Primitive bad144 support (I believe an additional command is needed, but won't know until Poul wakes up again). 2. Make vsystem() put its output on the debugging fd. 3. DTRT with root filesystem placement - now I see how this has to work (thanks, Poul). 4. Many miscellaneous spelling errors fixed and general cleanup.
1995-05-18 09:02:06 +00:00
{ "Label", "Label allocated disk partitions", /* L */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, diskLabelEditor, 0, 0 },
This should fix the last of the ftp path problems. It was all a bit more complex than it first looked.
1995-05-26 11:21:53 +00:00
{ "Distributions", "Choose the type of installation you want", /* T */
DMENU_SUBMENU, &MenuInstallType, 0, 0 },
{ "Media", "Choose the installation media type", /* M */
DMENU_SUBMENU, &MenuMedia, 0, 0 },
Totally revamp the TCP/IP dialog; now network selection makes a bit more sense. Root floppy (which actually may be able to go completely away at some point soon!) is now loadable from ftp/nfs/dos as well as CDROM and (of course) floppy. Fix more problems on Poul's Gripe List.
1995-05-26 08:41:52 +00:00
{ "Install", "Install FreeBSD onto your hard disk(s)", /* I */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_CALL, installCommit, 0, 0 },
{ "Configure", "Do post-install configuration of FreeBSD", /* C */
DMENU_SUBMENU, &MenuConfigure, 0, 0 },
This does _not yet compile_; I'm simply bringing in my changes from this weekend in order to more easily sync with my CVS tree at home. Another commit relative to these changes will follow shortly.
1995-05-16 02:53:31 +00:00
{ NULL } },
Latest raft of changes. Added another couple of menu item types. Reshuffled the menus and added a few more. Sure wish I could figure out how to initialize a menu with _one_ initializer rather than two! :(
1995-04-27 18:03:55 +00:00
};
1. Add MBR type menu to take it off of Poul's "gripe sheet". 2. Syntax correction from Andrey. Good night! :-)
1995-05-20 20:30:12 +00:00
/* MBR type menu */
DMenu MenuMBRType = {
DMENU_RADIO_TYPE | DMENU_SELECTION_RETURNS,
"Chose boot manager type", /* title */
"FreeBSD comes with a boot selector that allows you to easily\n\
select between FreeBSD and other operating systems on your machine\n\
at boot time. If you have more than one drive and wish to boot\n\
from other than the first, the boot selector will also allow you\n\
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
to do so (limitations in the PC BIOS usually prevent this otherwise).\n\
If you do not want a boot selector, or wish to replace an existing\n\
one, select \"standard\". If you would prefer your Master Boot\n\
Record to remain untouched, then select \"none\".",
1. Add MBR type menu to take it off of Poul's "gripe sheet". 2. Syntax correction from Andrey. Good night! :-)
1995-05-20 20:30:12 +00:00
"Press F1 to read the installation guide",
"install.hlp",
1. Bring in the first cut of Poul's ftp routines. We still don't use them yet, but it's close (we're working on the last wrinkles in the CD install for now). 2. Complete the CDROM installation strategy code. 3. Simplify the distribtuion loading code. 4. General error message cleanup. 5. Write the /etc/fstab file now and split those routines into config.c 6. Clean up the menus a little more.
1995-05-23 02:41:18 +00:00
{ { "*BootMgr", "Install the FreeBSD Boot Manager (\"Booteasy\")", /* B */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "bootManager=bteasy", 0, 0 },
1. Add MBR type menu to take it off of Poul's "gripe sheet". 2. Syntax correction from Andrey. Good night! :-)
1995-05-20 20:30:12 +00:00
{ "Standard", "Use a standard MBR (no boot manager)", /* S */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
DMENU_SET_VARIABLE, "bootManager=mbr", 0, 0 },
1. Add MBR type menu to take it off of Poul's "gripe sheet". 2. Syntax correction from Andrey. Good night! :-)
1995-05-20 20:30:12 +00:00
{ "None", "Leave the Master Boot Record untouched", /* N */
Totally revamp the TCP/IP dialog; now network selection makes a bit more sense. Root floppy (which actually may be able to go completely away at some point soon!) is now loadable from ftp/nfs/dos as well as CDROM and (of course) floppy. Fix more problems on Poul's Gripe List.
1995-05-26 08:41:52 +00:00
DMENU_SET_VARIABLE, "bootManager=none", 0, 0 },
1. Add MBR type menu to take it off of Poul's "gripe sheet". 2. Syntax correction from Andrey. Good night! :-)
1995-05-20 20:30:12 +00:00
{ NULL } },
};
Add a final configuration menu and the beginnings of the backing code for it. The ftp installation method is working well enough to test. Many more bug fixes, says Gary.
1995-05-24 01:27:15 +00:00
/* Final configuration menu */
DMenu MenuConfigure = {
DMENU_NORMAL_TYPE,
"FreeBSD Configuration Menu", /* title */
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
"If you've already installed FreeBSD, you may use this menu to\n\
customize it somewhat to suit your particular configuration. Most\n\
importantly, you can use the Packages utility to load extra \"3rd party\"\n\
software not provided in the base distributions.\n\n\
When you're done, select Cancel",
Add a final configuration menu and the beginnings of the backing code for it. The ftp installation method is working well enough to test. Many more bug fixes, says Gary.
1995-05-24 01:27:15 +00:00
"Press F1 for more information on these options",
"configure.hlp",
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
{ { "Add User", "Add users to the system",
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
DMENU_SYSTEM_COMMAND, "adduser -silent", 0, 0 },
Sync up with Poul.
1995-05-28 09:31:44 +00:00
{ "Console", "Customize system console behavior",
DMENU_SUBMENU, &MenuSyscons, 0, 0 },
{ "Networking", "Configure additional network services",
DMENU_SUBMENU, &MenuNetworking, 0, 0 },
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
{ "Time Zone", "Set which time zone you're in",
Clean up the configuration stuff a bit more - we should now populate /etc with good things(tm). Fire off ppp with all the proper initial options set.
1995-05-26 19:28:06 +00:00
DMENU_SYSTEM_COMMAND, "tzsetup", 0, 0 },
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
{ "Packages", "Install extra FreeBSD packaged software",
Clean up the configuration stuff a bit more - we should now populate /etc with good things(tm). Fire off ppp with all the proper initial options set.
1995-05-26 19:28:06 +00:00
DMENU_CALL, configPackages, 0, 0 },
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
{ "Ports", "Enable the FreeBSD Ports Collection from CD",
DMENU_CALL, configPorts, 0, 1 },
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
{ "Root Password", "Set the system manager's password",
Clean up the configuration stuff a bit more - we should now populate /etc with good things(tm). Fire off ppp with all the proper initial options set.
1995-05-26 19:28:06 +00:00
DMENU_SYSTEM_COMMAND, "passwd root", 0, 0 },
Bring everybody up to date on my morning's work. 1. Fix a few bugs in the ftp installation code and implement proper ftp and network shutdown routines. 2. Clean up the menus a fair bit - add a FreeBSD configuration menu. 3. Eliminate the last of the "chaining" - the installation now does the most obvious thing in the most obvious cases and doesn't present you with more menus than you were expecting. This makes it necessary to be a little more explicit in places, but it's still less confusing. 4. Add a few more safety nets for the user. Change a few hard-and-fast limits to warnings (it now runs as non-root, Bruce). 5. Add descriptions for all the supported ethernet cards. 6. Make the cpio floppy extract put up a menu requesting the drive you wish to use if you have more than one; don't just always assume drive A.
1995-05-24 17:49:20 +00:00
{ "XFree86", "Configure XFree86 (if installed)",
Add a final configuration menu and the beginnings of the backing code for it. The ftp installation method is working well enough to test. Many more bug fixes, says Gary.
1995-05-24 01:27:15 +00:00
DMENU_SYSTEM_COMMAND, "PATH=/usr/bin:/bin:/usr/X11R6/bin xf86config", 0, 0 },
{ NULL } },
};
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
Sync up with Poul.
1995-05-28 09:31:44 +00:00
DMenu MenuNetworking = {
NFS installation was broken - try to fix it.
1995-05-30 05:13:24 +00:00
DMENU_NORMAL_TYPE,
Sync up with Poul.
1995-05-28 09:31:44 +00:00
"Network Services Menu",
"You may have already configured one network device (and the\n\
other various hostname/gateway/name server parameters) in the process\n\
of installing FreeBSD. This menu allows you to configure other\n\
NFS installation was broken - try to fix it.
1995-05-30 05:13:24 +00:00
aspects of your system's network configuration.\n\n\
When you are done, select Cancel.",
Sync up with Poul.
1995-05-28 09:31:44 +00:00
NULL,
NULL,
{ { "NFS client", "This machine will be an NFS client",
DMENU_SET_VARIABLE, "nfs_client=YES", 0, 0 },
{ "NFS server", "This machine will be an NFS server",
DMENU_SET_VARIABLE, "nfs_server=YES", 0, 0 },
{ "interfaces", "Configure additional interfaces",
DMENU_CALL, tcpDeviceSelect, 0, 0 },
{ "ntpdate", "Select a clock-syncronization server",
DMENU_SUBMENU, &MenuNTP, 0, 0 },
{ "routed", "Set flags for routed (default: -q)",
DMENU_CALL, configRoutedFlags, 0, 0 },
{ "rwhod", "This machine wants to run the rwho daemon",
DMENU_SET_VARIABLE, "rwhod=YES", 0, 0 },
{ NULL } },
};
DMenu MenuNTP = {
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"NTPDATE Server Selection",
"There are a number of time syncronization servers available\n\
for public use around the Internet. Please select one reasonably\n\
close to you to have your system time syncronized accordingly.",
"These are the primary open-access NTP servers",
NULL,
{ { "Australia", "ntp.syd.dms.csiro.au (HP 5061 Cesium Beam)",
DMENU_SET_VARIABLE, "ntpdate=ntp.syd.dms.csiro.au", 0, 0 },
{ "Canada", "tick.usask.ca (GOES clock)",
DMENU_SET_VARIABLE, "ntpdate=tick.usask.ca", 0, 0 },
{ "France", "canon.inria.fr (TDF clock)",
DMENU_SET_VARIABLE, "ntpdate=canon.inria.fr", 0, 0 },
{ "Germany", "ntps1-{0,1,2}.uni-erlangen.de (GPS)",
DMENU_SET_VARIABLE, "ntpdate=ntps1-0.uni-erlangen.de", 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "Germany #2", "ntps1-0.cs.tu-berlin.de (GPS)",
Sync up with Poul.
1995-05-28 09:31:44 +00:00
DMENU_SET_VARIABLE, "ntpdate=ntps1-0.cs.tu-berlin.de", 0, 0 },
{ "Japan", "clock.nc.fukuoka-u.ac.jp (GPS clock)",
DMENU_SET_VARIABLE, "ntpdate=clock.nc.fukuoka-u.ac.jp", 0, 0},
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "Japan #2", "clock.tl.fukuoka-u.ac.jp (GPS clock)",
Sync up with Poul.
1995-05-28 09:31:44 +00:00
DMENU_SET_VARIABLE, "ntpdate=clock.tl.fukuoka-u.ac.jp", 0, 0},
{ "Netherlands", "ntp0.nl.net (GPS clock)",
DMENU_SET_VARIABLE, "ntpdate=ntp0.nl.net", 0, 0 },
{ "Norway", "timer.unik.no (NTP clock)",
DMENU_SET_VARIABLE, "ntpdate=timer.unik.no", 0, 0 },
{ "Sweden", "Time1.Stupi.SE (Cesium/GPS)",
DMENU_SET_VARIABLE, "ntpdate=Time1.Stupi.SE", 0, 0 },
{ "Switzerland", "swisstime.ethz.ch (DCF77 clock)",
DMENU_SET_VARIABLE, "ntpdate=swisstime.ethz.ch", 0, 0 },
{ "U.S. East Coast", "bitsy.mit.edu (WWV clock)",
DMENU_SET_VARIABLE, "ntpdate=bitsy.mit.edu", 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "U.S. East Coast #2", "otc1.psu.edu (WWV clock)",
Sync up with Poul.
1995-05-28 09:31:44 +00:00
DMENU_SET_VARIABLE, "ntpdate=otc1.psu.edu", 0, 0 },
{ "U.S. West Coast", "apple.com (WWV clock)",
DMENU_SET_VARIABLE, "ntpdate=apple.com", 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "U.S. West Coast #2", "clepsydra.dec.com (GOES clock)",
Sync up with Poul.
1995-05-28 09:31:44 +00:00
DMENU_SET_VARIABLE, "ntpdate=clepsydra.dec.com", 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "U.S. West Coast #3", "clock.llnl.gov (WWVB clock)",
DMENU_SET_VARIABLE, "ntpdate=clock.llnl.gov", 0, 0 },
Sync up with Poul.
1995-05-28 09:31:44 +00:00
{ "U.S. Midwest", "ncar.ucar.edu (WWVB clock)",
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
DMENU_SET_VARIABLE, "ntpdate=ncar.ucar.edu", 0, 0 },
Sync up with Poul.
1995-05-28 09:31:44 +00:00
{ "U.S. Pacific", "chantry.hawaii.net (WWV/H clock)",
DMENU_SET_VARIABLE, "ntpdate=chantry.hawaii.net", 0, 0 },
{ "U.S. Southwest", "shorty.chpc.utexas.edu (WWV clock)",
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
DMENU_SET_VARIABLE, "ntpdate=shorty.chpc.utexas.edu", 0, 0 },
Sync up with Poul.
1995-05-28 09:31:44 +00:00
{ NULL } },
};
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
DMenu MenuSyscons = {
DMENU_NORMAL_TYPE,
"System Console Configuration",
"The default system console driver for FreeBSD (syscons) has a\n\
number of configuration options which may be set according to\n\
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
your preference.\n\n\
When you are done setting configuration options, select Cancel.",
"Configure your system console settings",
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
NULL,
Sync up with Poul.
1995-05-28 09:31:44 +00:00
{ { "Keymap", "Choose an alternate keyboard map",
DMENU_SUBMENU, &MenuSysconsKeymap, 0, 0 },
{ "Repeat", "Set the rate at which keys repeat",
DMENU_SUBMENU, &MenuSysconsKeyrate, 0, 0 },
Add various missing seat belts.
1995-05-28 23:12:09 +00:00
{ "Saver", "Configure the screen saver",
Sync up with Poul.
1995-05-28 09:31:44 +00:00
DMENU_SUBMENU, &MenuSysconsSaver, 0, 0 },
{ NULL } },
};
DMenu MenuSysconsKeymap = {
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
"System Console Keymap",
"The default system console driver for FreeBSD (syscons) defaults\n\
to a standard \"American\" keyboard map. Users in other countries\n\
(or with different keyboard preferences) may wish to choose one of\n\
the other keymaps below.",
"Choose a keyboard map",
NULL,
{ { "Danish CP865", "Danish Code Page 865 keymap",
DMENU_SET_VARIABLE, "keymap=danish.cp865", 0, 0 },
{ "Danish ISO", "Danish ISO keymap",
DMENU_SET_VARIABLE, "keymap=danish.iso", 0, 0 },
{ "French ISO", "French ISO keymap",
DMENU_SET_VARIABLE, "keymap=fr.iso", 0, 0 },
{ "German CP850", "German Code Page 850 keymap",
DMENU_SET_VARIABLE, "keymap=german.cp850", 0, 0 },
{ "German ISO", "German ISO keymap",
DMENU_SET_VARIABLE, "keymap=german.iso", 0, 0 },
{ "Russian CP866", "Russian Code Page 866 keymap",
DMENU_SET_VARIABLE, "keymap=ru.cp866", 0, 0 },
{ "Russian KOI8", "Russian koi8 keymap",
DMENU_SET_VARIABLE, "keymap=ru.koi8-r", 0, 0 },
{ "Russian s-KOI8", "Russian shifted koi8 keymap",
DMENU_SET_VARIABLE, "keymap=ru.koi8-r.shift", 0, 0 },
{ "Swedish CP850", "Swedish Code Page 850 keymap",
DMENU_SET_VARIABLE, "keymap=swedish.cp850", 0, 0 },
{ "Swedish ISO", "Swedish ISO keymap",
DMENU_SET_VARIABLE, "keymap=swedish.iso", 0, 0 },
{ "U.K. CP850", "United Kingdom Code Page 850 keymap",
DMENU_SET_VARIABLE, "keymap=uk.cp850.iso", 0, 0 },
{ "U.K. ISO", "United Kingdom ISO keymap",
DMENU_SET_VARIABLE, "keymap=uk.iso", 0, 0 },
{ "U.S. ISO", "United States ISO keymap",
DMENU_SET_VARIABLE, "keymap=us.iso", 0, 0 },
{ NULL } },
};
DMenu MenuSysconsKeyrate = {
Add various missing seat belts.
1995-05-28 23:12:09 +00:00
DMENU_NORMAL_TYPE | DMENU_SELECTION_RETURNS,
Sync up with Poul.
1995-05-28 09:31:44 +00:00
"System Console Keyboard Repeat Rate",
"This menu allows you to set the speed at which keys repeat\n\
when held down.",
"Choose a keyboard repeat rate",
NULL,
{ { "Slow", "Slow keyboard repeat rate",
DMENU_SET_VARIABLE, "keyrate=slow", 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "Normal", "\"Normal\" keyboard repeat rate",
Sync up with Poul.
1995-05-28 09:31:44 +00:00
DMENU_SET_VARIABLE, "keyrate=normal", 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "Fast", "Fast keyboard repeat rate",
Sync up with Poul.
1995-05-28 09:31:44 +00:00
DMENU_SET_VARIABLE, "keyrate=fast", 0, 0 },
{ "Default", "Use default keyboard repeat rate",
DMENU_SET_VARIABLE, "keyrate=NO", 0, 0 },
{ NULL } },
};
DMenu MenuSysconsSaver = {
Add various missing seat belts.
1995-05-28 23:12:09 +00:00
DMENU_NORMAL_TYPE,
Sync up with Poul.
1995-05-28 09:31:44 +00:00
"System Console Screen Saver",
"By default, the console driver will not attempt to do anything\n\
special with your screen when it's idle. If you expect to leave your\n\
monitor switched on and idle for long periods of time then you should\n\
probably enable one of these screen savers to prevent phosphor burn-in.",
"Choose a nifty-looking screen saver",
NULL,
{ { "blank", "Simply blank the screen",
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
DMENU_SET_VARIABLE, "saver=star", 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "Green", "\"Green\" power saving mode (if supported by monitor)",
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
DMENU_SET_VARIABLE, "saver=snake", 0, 0 },
Sync up with Poul.
1995-05-28 09:31:44 +00:00
{ "Snake", "Draw a FreeBSD \"snake\" on your screen",
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
DMENU_SET_VARIABLE, "saver=snake", 0, 0 },
Sync up my work for the night. This should implement ALL possible installation methods and provide a fairly robust set of menu options. This should also fix a few more bugs on Poul-Henning's latest gripe list.
1995-05-29 11:01:42 +00:00
{ "Star", "A \"twinkling stars\" effect",
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
DMENU_SET_VARIABLE, "saver=star", 0, 0 },
Sync up with Poul.
1995-05-28 09:31:44 +00:00
{ "Timeout", "Set the screen saver timeout interval",
Sync to latest ftp-capable sysinstall. We're getting there!
1995-05-24 09:00:58 +00:00
DMENU_CALL, configSaverTimeout, 0, 0 },
{ NULL } },
};
Reference in New Issue Copy Permalink