d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c8bd6b0fed
freebsd-skq/etc/defaults/pccard.conf

2356 lines
63 KiB
Plaintext
Raw Normal View History

PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
#
Add entry for SMC 2632W card. Submitted by: lots of people, most recently by Mike Buchanon Also, Tried to clean up the comments about IRQs to match the new world order.
2001-07-22 18:13:19 +00:00
# Default PCCARD configuration file
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
#
$Id$ -> $FreeBSD$
1999-08-27 23:37:10 +00:00
# $FreeBSD$
Add comment suggesting that people send new entries to me. I've been coordinating things for a while.
2000-03-09 07:30:12 +00:00
#
Add entry for SMC 2632W card. Submitted by: lots of people, most recently by Mike Buchanon Also, Tried to clean up the comments about IRQs to match the new world order.
2001-07-22 18:13:19 +00:00
# Please send new entries for this file to imp@freebsd.org. He likes to
# review them before they are committed to make sure they are correct for
# the style of the file. Please attempt to use "auto" for the config
# number whereever possible. Do not commit IRQs in the "config" lines.
# Make sure that you use tabs rather than multiple spaces for new entires
# like the old ones. <tab>keyword<tab>arguments.
#
# Removing all IRQ conflicts from this file can't be done because of some
# IRQ-selfish PC-cards. So if you want to use some of those cards in
# your machine, you may need to modify the IRQ list below. Please put
# such overrides in /etc/pccard.conf. You can also place override
# card entries in /etc/pccard.conf, since the first match is the one that
# pccardd will use to configure the card.
Add comment suggesting that people send new entries to me. I've been coordinating things for a while.
2000-03-09 07:30:12 +00:00
#
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Generally available IO ports
io 0x240-0x360
List the valid IRQs and the non-sharingness. Submitted by: gshapiro
2001-05-30 05:29:42 +00:00
# on i386 IRQs can be any of 3 4 5 7 9 10 11 12 14 15
# on pc98 IRQs can be any of 3 5 6 9 10 11 12 13
Add entry for SMC 2632W card. Submitted by: lots of people, most recently by Mike Buchanon Also, Tried to clean up the comments about IRQs to match the new world order.
2001-07-22 18:13:19 +00:00
# but *MUST* *NOT* be used by anything else, unless you are using current
# and a PCI cardbus bridge that allows sharing. Even then, the rules
# for interrupt sharing can be tricky.
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Generally available IRQs (Built-in sound-card owners remove 5)
Remove irq 13 from the list of valid IRQs. It is used by the math co and is therefore unavailable. Also, IRQ13 isn't connected to the pcic chip on most laptops.
2000-07-11 17:57:01 +00:00
irq 3 5 10 11 15
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Available memory slots
memory 0xd4000 96k
Add entry for SMC 2632W card. Submitted by: lots of people, most recently by Mike Buchanon Also, Tried to clean up the comments about IRQs to match the new world order.
2001-07-22 18:13:19 +00:00
# Debug level, so you know how to get more info for maintainers. Put it
# in /etc/pccard.conf
#debuglevel 4
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Enable etc/defaults/pccard.conf which is default configuration file for pccardd. Please install /etc/defaults/pccard.conf and update /etc/defaults/rc.conf as well. Note that old pccard.conf.sample still remains for while but no longer to be maintained. Reviewed by: imp, -mobile ML and nomads ML in Japan.
2000-04-03 19:24:25 +00:00
# Include user configration file
# This allow you to override or add configurations.
include /etc/pccard.conf
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
#
# PLEASE KEEP THIS FILE IN ORDER
#
# In order is defined as follows. We sort first by driver type (an, ed, etc)
# and then by CIS strings. Do not commit to this file entries out of
# order.
#
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
########## aic ##########
# Adaptec SlimSCSI (also included with Sony CD-ROM players)
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
card "Adaptec, Inc." "/APA-1460 .*/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x9 "aic" ?
Re-add a call to "camcontrol rescan" after insertion of an aic pccard. We now do it as a "camcontrol rescan all" which is something ken promised to implement; for the time being it's not worse than the old "camcontrol rescan $device" which ended up in something like "camcontrol rescan aic1". Currently, camcontrol misinterprets the third non-numeric arg as number 0, and rescans bus 0, which is about the best we could get at this time. Approved by: imp MFC after: 1 week
2002-01-17 20:38:04 +00:00
insert camcontrol rescan all
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
# NewMedia Bustoaster SCSI
card "New Media" "SCSI"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x22 "aic" ?
Re-add a call to "camcontrol rescan" after insertion of an aic pccard. We now do it as a "camcontrol rescan all" which is something ken promised to implement; for the time being it's not worse than the old "camcontrol rescan $device" which ended up in something like "camcontrol rescan aic1". Currently, camcontrol misinterprets the third non-numeric arg as number 0, and rescans bus 0, which is about the best we could get at this time. Approved by: imp MFC after: 1 week
2002-01-17 20:38:04 +00:00
insert camcontrol rescan all
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## an ##########
Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA adapter (and some workalikes). Also add man pages and a wicontrol utility to manipulate some of the card parameters. This driver was written using information gleaned from the Lucent HCF Light library, though it does not use any of the HCF Light code itself, mainly because it's contaminated by the GPL (but also because it's pretty gross). The HCF Light lacks certain featurs from the full (but proprietary) HCF library, including 802.11 frame encapsulation support, however it has just enough register information about the Hermes chip to allow someone with enough spare time and energy to implement a proper driver. (I would have prefered getting my hands on the Hermes manual, but that's proprietary too. For those who are wondering, the Linux driver uses the proprietary HCF library, but it's provided in object code form only.) Note that I do not have access to a WavePOINT access point, so I have only been able to test ad-hoc mode. The wicontrol utility can turn on BSS mode, but I don't know for certain that the NIC will associate with an access point correctly. Testers are encouraged to send their results to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
Add driver support for the Aironet 4500/4800 series wireless 802.11 NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported, though only the ISA and PCI ones will work on the alpha for now. PCCARD, ISA and PCI attachments are all provided. Also provided an ancontrol(8) utility for configuring the NIC, man pages, and updated pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired mode, although you must configure the kernel explicitly to support the hardwired mode since you have to know the I/O address and port ahead of time. Special thanks to Doug Ambrisko for doing the initial newbus hackery and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00
# Aironet PC4500 2Mbps 802.11 wireless NIC
Fix a typo, so that the Aironet 4500 really does have an entry here. PR: 17028 Submitted by: David Malone <dwmalone@maths.tcd.ie> Approved by: jkh
2000-02-28 01:44:07 +00:00
card "Aironet" "PC4500"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x5 "an" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add driver support for the Aironet 4500/4800 series wireless 802.11 NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported, though only the ISA and PCI ones will work on the alpha for now. PCCARD, ISA and PCI attachments are all provided. Also provided an ancontrol(8) utility for configuring the NIC, man pages, and updated pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired mode, although you must configure the kernel explicitly to support the hardwired mode since you have to know the I/O address and port ahead of time. Special thanks to Doug Ambrisko for doing the initial newbus hackery and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00
# Aironet PC4800 11Mbps 802.11 wireless NIC
card "Aironet" "PC4800"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x5 "an" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add driver support for the Aironet 4500/4800 series wireless 802.11 NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported, though only the ISA and PCI ones will work on the alpha for now. PCCARD, ISA and PCI attachments are all provided. Also provided an ancontrol(8) utility for configuring the NIC, man pages, and updated pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired mode, although you must configure the kernel explicitly to support the hardwired mode since you have to know the I/O address and port ahead of time. Special thanks to Doug Ambrisko for doing the initial newbus hackery and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00
Add support for the Cisco Aironet 350 Series of adaptors. Also, make a minor ocrrection to the Aironet 340 Series comment. Approved by: imp (in principle)
2001-06-25 22:07:19 +00:00
# Aironet 340 Series 11Mbps 802.11 wireless NIC
add Cisco Systems Aironet 340 Series 11Mbps 802.11 wireless NIC PR: 20777
2000-09-26 06:29:40 +00:00
card "Cisco Systems" "340 Series Wireless LAN Adapter"
config auto "an" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add Cisco Systems Aironet 340 Series 11Mbps 802.11 wireless NIC PR: 20777
2000-09-26 06:29:40 +00:00
Add support for the Cisco Aironet 350 Series of adaptors. Also, make a minor ocrrection to the Aironet 340 Series comment. Approved by: imp (in principle)
2001-06-25 22:07:19 +00:00
# Aironet 350 Series 11Mbps 802.11 wireless NIC
card "Cisco Systems" "350 Series Wireless LAN Adapter"
config auto "an" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Xircom wireless card from pir@pir.net
2001-11-18 06:01:09 +00:00
# Xircom sells a rebaded unit
card "Xircom" "Wireless Ethernet Adapter"
config 0x5 "an" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## ata ##########
More new/corrected devices: o Correct Entry for Intel EtherExpress (jkoshy) o Add Option International 56K modem (markm) o Socket LP-E low power WinCE ethernet card (imp) Correction approved by: jkh Adding devices approved in principle by: jkh
2000-03-09 00:35:38 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Sony VAIO cdrom, Ninja-ATA CD-ROM Drive, MELCO CDN-D12EX
Sony VAIO cdrom
2000-05-16 05:24:26 +00:00
card " " "NinjaATA-"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ata" ?
logstr "NinjaATA"
Sony VAIO cdrom
2000-05-16 05:24:26 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Non-brand Compact Flash Card(32MB)
card " " "KCF 32M"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config 0x1 "ata" ? iosize 16
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
logstr "Compact Flash Card 32M"
Add two more cards: CNET CN40BC Ethernet adapter (ne2000 clone) Megahertz XJ32288 Submitted by: Juriy Goloveshkin <juriy@avias.com>
2000-03-07 08:51:39 +00:00
Add pc-card from ARCHOS CD-224E cdrom. MFC after: 1 week
2003-03-28 11:12:52 +00:00
# pc-card from ARCHOS CD-224E cdrom
card "ARC" "ATAPI"
config auto "ata" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Caravelle PSC-IDE 6x ATAPI CD-ROM
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "Caravelle" "/PSC-IDE */"
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
config 0x2a "ata" ? # 0x1 (flags for wd, not sure for ata)
# <Vendor Unknown> MCD-601p 6x CD-ROM drive.
card "CDROM" "IDE"
config auto "ata" ?
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
logstr "MCD-601p"
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
# Lexar Media compact flash
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/CL ATA FLASH CARD LEXAR */" "TIDALWV"
Move auto doesn't work comment closer to config line
2000-10-18 03:14:37 +00:00
# auto does not work
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
config 0x1 "ata" ?
Some new cards: o uncommnent joy stuff (me) o Add BONDWELL B236 joystick card (me) o Add Buffalo WLI-CF-S11G wi card (me) o CNF CD-m (submitted by gda) Submitted by: Dmitry A Goncharov <gda@sani.ru>
2001-12-27 02:12:32 +00:00
# CNF CD-M
card "CNF CD-M" "CD-ROM"
config auto "ata" ?
logstr "CNF CD-M"
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# DATAFAB PCMMD2
card "DATAFAB" "PCMCIA-TO-IDE"
config 0x1 "ata" ?
# DHU Mobile Media CD-ROM
# (no hotplug support)
card "Digital Equipment Corporation." "Digital Mobile Media CD-ROM"
use ``config auto "ata" ?'' for DHU Mobile Media CD-ROM Submitted by: Motonobu KOBAYASHI <kobayashimo@nttdocomo.co.jp> [bsd-nomads:14777]
2000-11-04 08:10:12 +00:00
config auto "ata" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
# EXP DVD-780 DVD-ROM drive
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/EXP */" "PnPIDE"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config auto "ata" ?
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
Added Toshiba CD-ROM from Mikael Hybsh
2000-05-16 07:37:35 +00:00
# Toshiba mobile CD-ROM (Bundled with Portege 3110CT)
card "FREECOM" "PCCARD-IDE"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config auto "ata" ? iosize 16
Added Toshiba CD-ROM from Mikael Hybsh
2000-05-16 07:37:35 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# FUJITSU FlashDiskCard ZEBO-ATA40
card "FUJITSU" "ZEBO-ATA"
config 0x03 "ata" ?
# Greystone Diskdock
card "GREYSTONE PERIPHERAL DISKDOCK" "/.*/"
config default "ata" ?
# HAGIWARA FLASH
card "HAGIWARA" "FLASH"
config default "ata" ?
# Hitachi Flash ATA
card "HITACHI" "/.*FLASH.*/"
config 0x01 "ata" ? iosize 16
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# IBM Flash ATA (Ricoh Flash ATA 10MB)
card "IBM" "IBM17JSSFP10"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config auto "ata" ? iosize 16
Minor nits and extra devices: o use ata2 consistanty, even though it doesn't matter too much o SunDisk (aka SanDisk) SDP's need a different config to actualy work (tested on the 10M part) by me. o Non-name ata card. o WIT IDE controller o IBM FLASH card o Megahert 28.8 cellular modem that I thought I'd added before. o LinkMake LM 336 combo modem/fax. Submitted by various people and gleaned from the nomads and mobile mailing lists, but I've lost the names. I'm sorry.
2000-03-07 04:52:49 +00:00
o Belkin wireless card PR: 38919 Submitted by: Tommy Johnson o IBM IDE CDROM PR: 39537 Submitted by: Kevin Van Maren o T-Sunus 130 card PR: 41802 Submitted by: Oliver Schneider
2002-09-29 23:13:08 +00:00
# IBM IDE PC-CARD CDROM (ThinkPad 240 and others)
card "PCMCIA" "IDE CARD"
config auto "ata" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# IBM Portable 4X Speed CD-ROM Drive CD-400
#card "IBM" "PCMCIA CD-ROM Drive CD-400"
# config 0x1 "ata" ? iosize 0x20 # 0x10000 (flags for wd, not sure for ata)
# IBM CD-20XSeries(IDE PC Card)
card "IBM" "PCMCIA Portable CD-ROM Drive"
config auto "ata" ? iosize 0x1
# IBM Microdrive (CF+ Type II)
card "IBM" "microdrive"
# config 0x03 "ata" ?
config 0x01 "ata" ? iosize 16
# Integral Peripherals Viper HDD Series
card "INTEGRAL PERIPHERALS" "ATA CARD"
# config default "ata" ?
config 0x01 "ata" ? iosize 16
# IO DATA PCMF144/20 (as Flash ATA only)
card "IO DATA" "ATA&MODEM"
config 0x7 "ata" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# IO DATA CBIDE2 in 16 bit mode
# (bundled with IO DATA CDP-AX24T, Panasonic DVD-ROM LK-RV8171D)
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "IO DATA" "/CBIDE2 */"
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
config default "ata" ?
Two more entries from the highly productive PRs of mihira-san yoshiro <sanpei@sanpei.org>. PR: 17622,18126
2000-05-16 07:17:24 +00:00
# IO Data PCIDE-II (bundled with CDP-TX6, etc.)
card "IO DATA" "PCIDEII"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config auto "ata" ?
Two more entries from the highly productive PRs of mihira-san yoshiro <sanpei@sanpei.org>. PR: 17622,18126
2000-05-16 07:17:24 +00:00
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
# Iomega Zip Drive
card "Iomega" "PCMCIA to 16 bit ATAPI Adapter"
config 0x2 "ata" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# KODAK Picture Card
card "KODAK Picture Card" "KODAK"
config default "ata" ?
Add entries for NETGEAR MA401RA, IO DATA PCET10CL and Panasonic KXL-CB10AN. Appologies to: those that submitted these to me.
2003-08-07 04:38:01 +00:00
# Panasonic KXL-CB10AN (CD-R/RW/DVD)
card "KME" "KXLC006"
config auto "ata" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# TOSHIBA Portable 24X Speed CD-ROM Drive PA2673UJ
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "LOOKMEET" "/CBIDE2 */"
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
config default "ata" ?
# Maxtor ATA HDD
card "Maxtor" "/MXL.*/"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config 0x03 "ata" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Add Planex geowave (hosokawa in nomads) Added two ata devices (Kazuya Kodama <kodama@rd.nacsis.ac.jp> in nomads) Added CyQ've ELA-110E (mihira-san <sanpei@sanpei.org>) The CyQ card doesn't have a PR number (yet).
2000-05-29 08:21:19 +00:00
# Microtech XpressDock
card "Microtech International Inc." "IDE PCCARD"
config auto "ata" ? 0x20000 iosize 16
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Midori Elec. Flash ATA
card "Midori Elec." "/.*FLASH.*/"
config 0x03 "ata" ?
add PC-Card entry, Panasonic Flash ATA BN-040ABP3 pccardd[358]: Card "Panasonic"("ATA") [BN-040AB-M 1.00 ] [(null)] matched "Panasonic" ("ATA") [BN-040AB-M ] [(null)] ata2 at port 0x240-0x24f irq 10 slot 0 on pccard0 ad4: 39MB <BN-040AB-M 1.00 > [625/8/16] at ata2-master BIOSPIO Submitted by: [bsd-nomads:15261] <m-kawata@cd.jp.nec.com>
2001-03-07 13:23:08 +00:00
# Panasonic Flash ATA BN-040ABP3
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "Panasonic" "ATA" "/BN-040AB-M */"
add PC-Card entry, Panasonic Flash ATA BN-040ABP3 pccardd[358]: Card "Panasonic"("ATA") [BN-040AB-M 1.00 ] [(null)] matched "Panasonic" ("ATA") [BN-040AB-M ] [(null)] ata2 at port 0x240-0x24f irq 10 slot 0 on pccard0 ad4: 39MB <BN-040AB-M 1.00 > [625/8/16] at ata2-master BIOSPIO Submitted by: [bsd-nomads:15261] <m-kawata@cd.jp.nec.com>
2001-03-07 13:23:08 +00:00
# auto does not work
config 0x1 "ata" ?
logstr "Panasonic Flash ATA BN-040ABP3"
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# LK-RM120
card "Panasonic" "LMEK0406"
config 0x22 "ata" ? 0x1
Add Billionton 10 Base-TX ETHERNET PC CARD. This entry has a high likelyhood of conflicting with others since the CIS identifies this as "PCMCIA" "PCMCIA-ETHERNET-CARD".
2000-01-24 05:35:32 +00:00
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
# Another boring, generic ata atapter
card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config auto "ata" ?
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# pc-card from PSCD-740 cdrom
card "PCMCIA" "CD-ROM"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config 0x1 "ata" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
# Novac DVD/CD Station
Novac DVD/CD Station(Portable DVD/CD-ROM player Submitted by: moment@pluto.dti.ne.jp
2001-12-28 03:42:41 +00:00
card "PCMCIA" "PnPIDE"
config auto "ata" ?
Merge latest cards from my laptop: o The Shining PMIDE-ASC card is also used in Road Warrior's Bullet Drive, so add that to the comments. o Eiger Lab's fujitsu based ethernet card: EPX-10BT (thanks to Ryan Losh for donating the card to the cause). o Add place holder entry for the 3Com Megahertz 3CXEM556. It doesn't work yet, but that will change in time.
2000-07-11 17:52:41 +00:00
# Shining PMIDE-ASC CDROM / Road Warrior Bullet Disk
add Shining PMIDE-ASC CDROM PR: 19236
2000-07-09 12:51:05 +00:00
card "Shining" "PMIDE-ASC"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ata" ? 0x20000
add Shining PMIDE-ASC CDROM PR: 19236
2000-07-09 12:51:05 +00:00
Add Planex geowave (hosokawa in nomads) Added two ata devices (Kazuya Kodama <kodama@rd.nacsis.ac.jp> in nomads) Added CyQ've ELA-110E (mihira-san <sanpei@sanpei.org>) The CyQ card doesn't have a PR number (yet).
2000-05-29 08:21:19 +00:00
# Microtech PortableDRIVE25/PCMCIA
card "SHUTTLE TECHNOLOGY LTD." "PCCARD-IDE/ATAPI Adapter"
config auto "ata" ? 0x20000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# XXX NOT SURE SUPPORTED
# CitiDISK & Addonics PocketZIP
#card "Shining" "PMIDE-ASC"
# config default "ata" ? # 0x20000 (flags for wd, not sure for ata)
# Sicon Peripheral PCMCIA ATA/ATAPI Adapter
card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter"
config default "ata" ?
# SiliconTech,Inc. Compact PC Card
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
card "SiliconTech,Inc." "/[0-9]+MB Compact PC Card/"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config 0x1 "ata" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Simple Technology ata flash
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/Simple Technology */" "STI-ATA"
Fix Simple Tech STI-ATA Submitted by: dwhite@paypal.com PR: 34243
2002-03-05 05:48:32 +00:00
config auto "ata" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# SONY Memory Stick PC Card Adaptor
card "SONY" "/MEMORYSTICK.*/"
config 0x01 "ata" ?
iosize 16
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# SunDisk Flash ATA
# (OEM: Epson Flash Packer)
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
card "SunDisk" "/.*/"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config 0x1 "ata" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
o Add T-POWER flash Submitted by: Michael Johansson <micke@nevermind.net> o Sony PCWA-C100 WaveLAN card Submitted by: "Jeremiah Gowdy" <jgowdy@home.com> o Corega KK Wireless LAN PCCA-11 (version b?) Submitted by: Masahide *MAC* Noda <mac@clave.gr.jp>
2002-01-10 18:53:00 +00:00
# T-POWER Flash ATA
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/T-POWER */" "/.*/"
o Add T-POWER flash Submitted by: Michael Johansson <micke@nevermind.net> o Sony PCWA-C100 WaveLAN card Submitted by: "Jeremiah Gowdy" <jgowdy@home.com> o Corega KK Wireless LAN PCCA-11 (version b?) Submitted by: Masahide *MAC* Noda <mac@clave.gr.jp>
2002-01-10 18:53:00 +00:00
config 0x1 "ata" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# TDK Flash ATA
card "TDK TC_H." "/.*/"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config 0x1 "ata" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# IO Data CBIDE (bundled with CDP-FX24, etc.)
card "WIT" "IDE16"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config auto "ata" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# LIP-32B attached to Logitec LCW-PD648PI
card "WORKBIT" "ATA-32Bi(16)"
config default "ata" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Viking ATA Flash card
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/VIKING ATA/CF FLASH CARD */" "/TOR/AM */"
Add Iomega IDE card for their 250M drives. Also remove the N in all ataN entries while I'm here. They aren't generally needed. Submitted by: "Sean O'Connell" <sean@stat.Duke.EDU>
2000-05-16 20:43:32 +00:00
config 0x2 "ata" ?
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
########## awi ##########
# Generic AMD Am79c930 based card
add Melco WLI-PCM
2000-11-10 13:02:38 +00:00
# Melco WLI-PCM
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
card "AMD" "Am79C930"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x1 "awi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
Add comments just before each config for the awi cards. Add ZoomAir card. Change a couple default to auto. Also change a couple awi entires to auto from 0x1.
2000-12-11 19:16:21 +00:00
# Bay Networks Baystack 650 Wireless LAN
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
card "Bay Networks" "BayStack 650 Wireless LAN"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x1 "awi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
Add an apparently working entry for the BayStack 660, 2mbps direct sequence wireless card. Approved by: imp (in principle)
2001-09-27 21:38:02 +00:00
# Bay Networks Baystack 660 Wireless LAN
card "Bay Networks" "BayStack 660 Wireless LAN"
config auto "awi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add comments just before each config for the awi cards. Add ZoomAir card. Change a couple default to auto. Also change a couple awi entires to auto from 0x1.
2000-12-11 19:16:21 +00:00
# Farallon SkyLINE Wireless
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
card "Farallon" "SkyLINE Wireless"
Add comments just before each config for the awi cards. Add ZoomAir card. Change a couple default to auto. Also change a couple awi entires to auto from 0x1.
2000-12-11 19:16:21 +00:00
config auto "awi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
Add comments just before each config for the awi cards. Add ZoomAir card. Change a couple default to auto. Also change a couple awi entires to auto from 0x1.
2000-12-11 19:16:21 +00:00
# ICom SL-200
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
card "Icom" "SL-200"
Add comments just before each config for the awi cards. Add ZoomAir card. Change a couple default to auto. Also change a couple awi entires to auto from 0x1.
2000-12-11 19:16:21 +00:00
config auto "awi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
2Mbps card from Teletronics. Looks like a generic OEM card for the awi driver, but the MAC address isn't recognized, so maybe this is wrong.
2001-09-10 03:30:47 +00:00
# Teletronics WL2000D 2Mbps wireless card
# Might not be right, reports are that it reports ether of 0:0:0:0:0:0
card "OEM" "WLAN/WPMCIA"
config auto "awi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add comments just before each config for the awi cards. Add ZoomAir card. Change a couple default to auto. Also change a couple awi entires to auto from 0x1.
2000-12-11 19:16:21 +00:00
# ZoomAir 4000
card "Zoom" "Air-4000"
config auto "awi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Two changes: 1) Move an cards to after aic, since an sorts after aic. 2) Add awi cards for the new awi drivers. This is a wireless pcmcia card.
2000-04-06 02:54:35 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
########## cnw ##########
# NetWave AirSurfer
# NOTE: For some machines, wait cycle for memory access is required.
# you should change "0x40" on the last part of "cardmem" line to "0x44",
# like:
# cardmem 0xd4000 0x20000 0x9000 0x44
# IBM ThinkPads are known to require this change.
Add comments just before each config for the awi cards. Add ZoomAir card. Change a couple default to auto. Also change a couple awi entires to auto from 0x1.
2000-12-11 19:16:21 +00:00
# Xircom CreditCard Netwave
Add some devices: Xircom CreditCard Netwave cnw Intel PRO/Wireless 2011 (PRISM II) wi 3COM 3CRWE737A (PRISM II) wi Note: I've had some reports that the latter two cards work, but I've not been able to get them to work for me.
2001-03-16 07:36:54 +00:00
card "Xircom" "CreditCard Netwave"
config 0x01 "cnw" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add cs driver for IBM EtherJet card. Doesn't completely work yet, but it won't work without it.
2001-09-10 04:08:28 +00:00
########## cs ##########
# NOTE: This likely doesn't work, but might.
# IBM EtherJet PC Card 16bit version
card "IBM" "EtherJet PC Card"
config auto "cs" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## ed ##########
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# No-brand NE2000 compatible card (FCC ID: LXLC1LANTB)
card " " "Ethernet Combo card"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
logstr "NE2000 compatible card"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Map Japan MPL-972
card "2408LAN" "Ethernet"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# Accton EN2212
# Very slow! (PIO mode)
card "ACCTON" "EN2212"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ? 0x30
ether 0xff0 # 00:00:e8
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Accton EN2216
- Added entry for Accton 2216 ethernet card. Submitted by: Patrick Gardella <patrick@cre8tivegroup.com>
1997-11-14 18:48:59 +00:00
card "ACCTON" "EN2216-PCMCIA-ETHERNET"
use ``config auto'' for ACCTON EN2216-PCMCIA-ETHERNET Submitted by: taguchi@tohoku.iij.ad.jp
2000-12-23 16:11:50 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
- Added entry for Accton 2216 ethernet card. Submitted by: Patrick Gardella <patrick@cre8tivegroup.com>
1997-11-14 18:48:59 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Allied Telesis CentreCOM LA-PCM
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "Allied Telesis,K.K" "Ethernet LAN Card"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config default "ed" ? 0x10
ether 0xff0 # 00:00:f4
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add COREGA EtherII PCC-T entry. Submitted by: KANAZAWA makoto <mako@tcn-catv.ne.jp> PR: conf/12650
1999-10-07 15:50:44 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Allied Telesis CentreCOM LA-PCM_V2 ethernet card
# NTT-DATA ASTROWINK-M/MMOIL(IrLAN) ethernet card
card "Allied Telesis, K.K." "CentreCOM LA-PCM_V2"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add I-O DATA PCLATE entry. Submitted by: sanpei@sanpei.org PR: conf/13038 URL: http://www.iodata.co.jp/products/pccard/pclate.htm
1999-10-11 05:01:08 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Allied Telesis CentreCOM LA100-PCM-T V2
card "Allied Telesis, K.K." "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Allied Telesis CentreCOM LA-PCM V3
card "Allied Telesis K.K." "LA-PCM V3"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# AmbiCom 10BaseT card
card "AmbiCom Inc" "AMB8002T"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Belkin F5D5020 pccard. Submitted by: Philip Pereira
2002-09-30 00:51:49 +00:00
# Belkin F5D5020
card "Belkin" "F5D5020-PCMCIA-Network-Card"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
"10/100Base FastEthernet PC CARD" (LNA-100) from Billionton Systems Inc. Submitted by: "Torfinn Ingolfsen" <torfinn.ingolfsen@oslo.online.no>
2001-12-29 02:15:46 +00:00
# Billionton LNA-100B
card "Billionton" "LNA-100B"
config auto "ed" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Billionton LNT-10TB
card "Billionton" "LNT-10TB"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add Billionton LNT-10TN Submitted by: Miklos Niedermayer <mico@bsd.hu> PR: conf/27726
2001-05-30 21:30:40 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
# Billionton LNT-10TN
card "Billionton" "LNT-10TN"
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
add new PC-Card entry, Melco/Buffalo LPC2-CLT ed1 at port 0x300-0x31f irq 3 slot 0 on pccard0 ed1: address 00:40:26:xx:xx:xx, type NE2000 (16 bit) Submitted by: [FreeBSD-users-jp 58182] YANAGAWA Kazuhisa <kjana@os.xaxon.ne.jp>
2001-01-14 08:40:20 +00:00
remove /etc/pccard_ether $device stop
Add BUFFALO LPC-CF-CLT(10Base-T Compact Flash Ether Card).
2003-01-18 02:14:23 +00:00
# BUFFALO LPC-CF-CLT
card "BUFFALO" "LPC-CF-CLT"
config auto "ed" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add new PC-Card entry, Melco/Buffalo LPC2-CLT ed1 at port 0x300-0x31f irq 3 slot 0 on pccard0 ed1: address 00:40:26:xx:xx:xx, type NE2000 (16 bit) Submitted by: [FreeBSD-users-jp 58182] YANAGAWA Kazuhisa <kjana@os.xaxon.ne.jp>
2001-01-14 08:40:20 +00:00
# BUFFALO LPC2-CLT
card "BUFFALO" "LPC2-CLT"
config auto "ed" ?
insert /etc/pccard_ether $device start
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Buffalo LPC3-CLT Submitted by: TANAKA Tomohiko <tomo@oso.to> PR: 34954
2002-03-05 05:51:30 +00:00
# BUFFALO LPC3-CLT
card "BUFFALO" "LPC3-CLT"
config auto "ed" ? 0x30000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add BUFFALO LPC3-CLX Submitted by: Takashi Ikeda <ccikeda@moon.aichi-u.ac.jp> Add TOSHIBA Ethernet Card LABCTA00A. Submitted by: "minoru kurata" <minoru.kurata@toshiba.co.jp> Obtained from: PAO3
2000-11-01 10:30:53 +00:00
# BUFFALO LPC3-CLX
card "BUFFALO" "LPC3-CLX"
fix MELCO LPC3-TX config use ``config auto'' add ether line Submitted by: bsd-nomads mailing list 14954: Seigo Tanimura <tanimura@r.dl.itc.u-tokyo.ac.jp> 14967: Yoichi Nakayama <yoichi@eken.phys.nagoya-u.ac.jp> 14971: WAKABAYAI Susumu <susumu@wakabaya.net>
2000-12-23 15:27:54 +00:00
config auto "ed" ? 0x30000
ether 0x1c8
Add BUFFALO LPC3-CLX Submitted by: Takashi Ikeda <ccikeda@moon.aichi-u.ac.jp> Add TOSHIBA Ethernet Card LABCTA00A. Submitted by: "minoru kurata" <minoru.kurata@toshiba.co.jp> Obtained from: PAO3
2000-11-01 10:30:53 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# CNet BC40 adapter
card "CNet" "CN40BC Ethernet"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
add COREGA FEther PCC-TXF (MITA Yoshio <mita@ee.t.u-tokyo.ac.jp> in [bsd-nomads:14572])
2000-10-08 07:42:52 +00:00
# COREGA FEther PCC-TXF
card "corega" "FEther PCC-TXF"
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add COREGA FEther PCC-TXF (MITA Yoshio <mita@ee.t.u-tokyo.ac.jp> in [bsd-nomads:14572])
2000-10-08 07:42:52 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# COREGA Ether PCC-T and COREGA EtherII PCC-T
card "corega K.K." "/corega Ether(II)? PCC-T/"
use ``config auto'' for COREGA EtherII PCC-T.
2000-10-01 05:50:18 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add support for explicit 3C589D varients and XJ1336 modems
1997-12-16 02:43:26 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# COREGA FastEther PCC-TX
card "corega K.K." "corega FastEther PCC-TX"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
add new PC-Card entry, COREGA FEther PCC-TXD ed1 at port 0x300-0x31f iomem 0xd0000-0xd0fff irq 3 slot 0 on pccard0 ed1: address 00:90:99:xx:xx:xx, type NE2000 (16 bit)
2001-01-03 08:42:08 +00:00
remove /etc/pccard_ether $device stop
Someone (sanpei-san?) sent me this entry some time ago. Add COREGA FEtherII PCC-TXD to the FEther PCC-TXD entry (since they appear to be handled the same).
2004-11-08 16:59:01 +00:00
# COREGA FEther PCC-TXD and COREGA FEtherII PCC-TXD
card "corega K.K." "corega FEther(II)? PCC-TXD"
add new PC-Card entry, COREGA FEther PCC-TXD ed1 at port 0x300-0x31f iomem 0xd0000-0xd0fff irq 3 slot 0 on pccard0 ed1: address 00:90:99:xx:xx:xx, type NE2000 (16 bit)
2001-01-03 08:42:08 +00:00
config auto "ed" ? 0x30000
insert /etc/pccard_ether $device start
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Two more entries from the highly productive PRs of mihira-san yoshiro <sanpei@sanpei.org>. PR: 17622,18126
2000-05-16 07:17:24 +00:00
# Corega PCM-T
card "Corega,K.K." "Ethernet LAN Card"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
ether 0xff0 # 00:00:f4
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Two more entries from the highly productive PRs of mihira-san yoshiro <sanpei@sanpei.org>. PR: 17622,18126
2000-05-16 07:17:24 +00:00
Speculatively commit fix for Surecom EP-427TX PCMCIA adapter. This appears to be another OEM version of the Netgear FA411. This is a guess, since the original didn't include the flags, but this is too similar to my netgear card... Submitted by: neal@nelsonnet.org
2001-09-09 23:28:09 +00:00
# Surecome EP-427X PCMCIA ethernet
card "CouplerlessPCMCIA" "100BASE"
config auto "ed" ? 0x30000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# CyQ've ELA-010
card "CyQ've" "ELA-010"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Added CyQ've ELA-110 Obtained from: [FreeBSD-users-jp 52722] cory@cory.to (CORY/ISAKA_Yoji)
2000-06-20 12:02:12 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# CyQ've ELA-110 and ELA-110E
card "CyQ've" "/ELA-110E? 10/100M LAN Card/"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Planex geowave (hosokawa in nomads) Added two ata devices (Kazuya Kodama <kodama@rd.nacsis.ac.jp> in nomads) Added CyQ've ELA-110E (mihira-san <sanpei@sanpei.org>) The CyQ card doesn't have a PR number (yet).
2000-05-29 08:21:19 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# D-Link DE-650 and DE-660
card "D-Link" "/DE-6[56]0/"
config auto "ed" ? 0x10
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# D-Link DFE-650 Fast Ethernet Card
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "D-Link" "DFE-650"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ? 0x80010
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
3C574TX Fast Etherlink PC-card support.
1999-07-25 01:21:44 +00:00
Add support for DFE-670TXD to OLDCARD Submitted by: David Wolfskill PR: 53356
2003-07-19 05:40:06 +00:00
# D-Link DFE-670 Fast Ethernet Card
card "D-Link" "DFE-670TXD"
config auto "ed" ? 0x80010
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# D-Link DME-560T LAN/FAX/MODEM Card (as Ethernet)
card "D-Link" "DME560T"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config default "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Danpex (Alloy, etc.) EN-6200P2
card "DANPEX" "EN-6200P2"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add example entry for the 3Com Megahertz 574B
2000-01-15 05:44:14 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Dayna Communications CommuniCard E
card "Dayna Communications, Inc." "CommuniCard E"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0x110 # 00:80:19
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Digital DEPCM-BA Ethernet
card "DIGITAL" "DEPCM-XX"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:00:e8
Add a commented-out alternative for the ether line of a DIGITIAL DEPCM-BA card, as found on my rev. C01 card. MFC after: 1 week
2002-01-08 22:32:00 +00:00
# ether 0x1c0 # 00:00:e8 -- seen on a rev. C01 card
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Planex FNW-3600-T and FNW-3600-TX DirectDock (second model)
card "Dual Speed" "/10/100( Port Attached)? PC Card/"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add Planex FNW-3600-TX 16bit FastEthernet DirectDock Obtained from: [bsd-nomads:13991] reported by Akihiro IIJIMA <aki@jp.FreeBSD.org>
2000-07-11 14:22:19 +00:00
o FreeSPirit ISDN/56K modem card o No-name OEM Prism card o ActionTec Prism card o ZoomAir 11Mbps High Rate wireless networking PR: 41929, 41928 Submitted by: Bruce M Simpson o Dynalink L100C16 PR: 41938 Submitted by: Marco van de Voort
2002-09-29 22:51:31 +00:00
# Dynalink L100C16
card "Dynalink" "L100C16"
config auto "ed" ?
insert /etc/pccard_ether $device
remove /etc/pccard_ether $device stop
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Linksys Combo PCMCIA Ethernet Card
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
card "E-CARD" "E-CARD"
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
logstr "Linksys Combo Ethernet Card"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
- Added entries for LinkSys ethernet card and Apex Data Modem. Submitted by: Ken Key <key@cs.utk.edu>
1997-12-05 04:33:58 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Eiger Labs Ethernet COMBO
card "EIGER Labs Inc." "Ethernet COMBO Card"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# XXX Compex Net-A adapter, Telecom SuperSocket RE450T,
# Apollo PCMCIA Ethernet Adapter, PLANEX ENW-3503-T and
# Fiber line 10M Ethernet COMBO have same manufacturer and
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
# card version string. They should be distinguished by
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# other info. (such as additional information or OEM-ID/product-ID).
Added entry for Billionton LM5LT-10N Fixed small typo Reviewed by: imp Approved by: imp
2003-07-22 21:23:01 +00:00
# Note: There are several revisions of the card on the market.
added "Telecom Device SuperSocket RE450T" (PCMCIA NE2000 variant).
1998-02-24 13:56:38 +00:00
# Type A needs no "ether" line.
# Type B needs "ether 0x110" line.
# Type C needs "ether 0xff0" line.
# Yet more revisions exist, reportedly.
# If you see strange MAC address shown by ifconfig command,
# try other config.
card "Ethernet" "Adapter"
MFS: cosmetic changes use /etc/pccard_ether for Xircom CreditCard Netwave and 3Com Corporation" "3C562" (BUT NOT SUPPORTED). fix `card line' of RATOC REX-5572 (as SCSI only) use `config auto' for RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
2000-10-30 14:26:52 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# ether 0x110 # 00:e0:98
ether 0xff0 # 00:e0:98
MFS: cosmetic changes use /etc/pccard_ether for Xircom CreditCard Netwave and 3Com Corporation" "3C562" (BUT NOT SUPPORTED). fix `card line' of RATOC REX-5572 (as SCSI only) use `config auto' for RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
2000-10-30 14:26:52 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
# pci Ethernet Adapter Card
card "Ethernet" "CF Size PC Card"
MFS: cosmetic changes use /etc/pccard_ether for Xircom CreditCard Netwave and 3Com Corporation" "3C562" (BUT NOT SUPPORTED). fix `card line' of RATOC REX-5572 (as SCSI only) use `config auto' for RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
2000-10-30 14:26:52 +00:00
config auto "ed" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# "Ethernet Adapter" "E2000 PCMCIA Ethernet"
card "Ethernet Adapter" "E2000 PCMCIA Ethernet"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# ADDTRON EP-210A
card "EP-210 PCMCIA LAN CARD." "/.*/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0x110 # 00:40:33
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Planex FNW-3700-T Fast Ethernet
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
card "Fast Ethernet" "16-bit PC Card"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x30000
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
logstr "Planex FNW-3700-T"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Planex FNW-3600-T 16bit Fast Ethernet (old model)
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "Fast Ethernet" "Adapter"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
logstr "Planex FNW-3600-T"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add TDK Grey Cell GCS2000 Ethernet Card PR: 22184
2000-10-21 15:09:27 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# TDK Grey Cell GCS2000 and GCS2220
card "Grey Cell" "/GCS2(00|22)0/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# GVC NIC-2000P Ethernet Card
card "GVC" "NIC-2000p"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
added "Telecom Device SuperSocket RE450T" (PCMCIA NE2000 variant).
1998-02-24 13:56:38 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# IBM PCMCIA Ethernet I/II, RIOS PC CARD II ETHERNET
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "IBM Corp." "Ethernet"
use ``config auto'' for IBM PCMCIA Ethernet I/II Submitted by: WAKABAYAI Susumu <susumu@wakabaya.net>
2000-12-23 16:01:16 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 08:00:5a 00:04:ac 00:06:29
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add entry for NDC Ethernet Instant-Link Credit Card Adapter, a NE2000 clone. This was tested on a ND5100 rev.A2 card.
1999-09-06 18:29:09 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# AR-P500 ethernet card, Planet Communications Smart COM 3500 same as
# model ENW-3500 and ENW-3501-T, IC-CARD Ethernet, SYSCOM SC100 Ethernet Card
# ELECOM Laneed LD-CDY, IC-CARD+ Ethernet card
Fixed my mistake (rev: 1.169). Submitted by: sanpei
2000-12-29 09:57:17 +00:00
card "/^IC-CARD\+?$/" "/^IC-CARD\+?$/"
use ``config auto'' - Melco LPC-T (PIO mode) - AR-P500 ethernet card - Accton EN2226/Fast EtherCard (16-bit verison)
2000-10-02 14:41:09 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
More cards from posts to -mobile.
2000-02-14 08:02:27 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# I/O DATA PCLA/T
card "I-O DATA" "PCLA"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# ether 0x1c0 # 00:a0:b0
ether 0xff0 # 00:a0:b0
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add entries for NETGEAR MA401RA, IO DATA PCET10CL and Panasonic KXL-CB10AN. Appologies to: those that submitted these to me.
2003-08-07 04:38:01 +00:00
# I/O DATA PCET10-CL
card "IO DATA" "PCET10CL"
any -> ? for new entry (to allow time for people to upgrade their pccardd)
2003-10-04 18:44:29 +00:00
config auto "ed0" ? 0x10
Add entries for NETGEAR MA401RA, IO DATA PCET10CL and Panasonic KXL-CB10AN. Appologies to: those that submitted these to me.
2003-08-07 04:38:01 +00:00
insert /etc/pccard_ether $device
remove /etc/pccard_ether_remove $device
Entry for I-O Data PCET/100-CL Submitted by: MATSUO Masahiko-san
2002-09-30 00:40:23 +00:00
# I-O DATA PCET/100-CL
card "IO DATA" "PCET100CL"
config auto "ed" ? 0x80000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# I-O DATA PCET/TX
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "IO DATA" "PCETTX"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Allied Telesis CentreCOM LA-PCM_V2 entry. Submitted by: sanpei@sanpei.org PR: conf/14301
1999-10-16 13:52:43 +00:00
Add PC-Card entry, I-O DATA PCET/TX-R This card was DL10022 based card. Submitted by: [bsd-nomads:15287] Yoshihiko SARUMARU <mistral@imasy.or.jp>
2001-03-12 13:11:17 +00:00
# I-O DATA PCET/TX-R
card "IO DATA" "PCETTXR"
config auto "ed" ? 0x80000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Stick the I-O DATA PCLA/TE PC Card adapter entry in the right sort order.
2001-03-09 00:30:48 +00:00
# I-O DATA PCLA/TE
card "IO DATA" "PCLATE"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# KANSAI ELECTRIC KLA-PCM/T
card "KANSAI ELECTRIC CO.,LTD" "KLA-PCM/T"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Kingston KNE-PC2
Add Kingston KNE ed0 clone. Submitted by: Nick Sayer
2000-05-16 05:49:29 +00:00
card "Kingston" "KNE-PC2"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Kingston KNE-PCM/x Ethernet
card "Kingston Technology Corp." "/EtheRx PC Card Ethernet.*/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:c0:f0
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# ELECOM Laneed LD-10/100CD
card "Laneed" "LD-10/100CD"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Kingston KNE ed0 clone. Submitted by: Nick Sayer
2000-05-16 05:49:29 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# ELECOM Laneed LD-CDF, LD-CDS
card "Laneed" "/LD-CD[FS]/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
add PC-Card entry, ELECOM Laneed LD-CDL/TX ed1 at port 0x240-0x25f irq 3 slot 0 on pccard0 ed1: address 00:90:fe:xx:xx:xx, type Linksys (16 bit) Submitted by: taguchi@tohoku.iij.ad.jp
2000-12-26 00:59:34 +00:00
# ELECOM Laneed LD-CDL/TX
card "Laneed" "LD-CDL/TX"
config auto "ed" ? 0x80000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
# Linksys Combo PCMCIA EthernetCard (model EC2T on box)
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "Linksys" "Combo PCMCIA EthernetCard (EC2T)"
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Linksys Combo PCMCIA Ethernet Card
card "LINKSYS" "E-CARD"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
logstr "Linksys Combo Ethernet Card"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
clarify PCMLM56 status
2001-09-10 08:07:46 +00:00
# Linksys PCMLM56
# Not currently working for me, but others say it does.
Mihira-san says that this works for him. Linksys EtherFast 10/100 + 56k modem with the fat connector. Submitted by: sanpei@sanpei.org (MIHIRA yoshiro) Ignored since Jan 2001 by: imp
2001-09-09 23:58:09 +00:00
card "Linksys" "EtherFast 10&100 + 56K PC Card (PCMLM56)"
config auto "ed" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add IBM 56K Modem (PR 17992, Jeroen C. van Gelderen) Fix D-Link 660 entry (PR 1340, Annelise Anderson) Add more comments to very generic pcmcia ethernet card entry (PR 17006, Georg Graf) Add Linksys EtherFast 10/100 Intergrated PC Card (PCM100) (private mail from Sean O'Connell) PRs: 17006, 13402, 17992
2000-05-27 04:48:30 +00:00
# Linksys EtherFast 10/100 Intergrated PC Card (PCM100)
card "Linksys" "EtherFast 10/100 Integrated PC Card (PCM100)"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add IBM 56K Modem (PR 17992, Jeroen C. van Gelderen) Fix D-Link 660 entry (PR 1340, Annelise Anderson) Add more comments to very generic pcmcia ethernet card entry (PR 17006, Georg Graf) Add Linksys EtherFast 10/100 Intergrated PC Card (PCM100) (private mail from Sean O'Connell) PRs: 17006, 13402, 17992
2000-05-27 04:48:30 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Linksys EtherFast 10/100 PC Card (PCMPC100), model V2 and V3
Join tree entries for Linksys PCMPC100 series as follows: "Linksys" "EtherFast 10/100 PC Card (PCMPC100)" "Linksys" "Etherfast 10/100 PC Card (PCMPC100 V2)" "Linksys" "EtherFast 10/100 PC Card (PCMPC100 V3)"
2000-12-20 17:13:09 +00:00
card "Linksys" "/Ether[Ff]ast 10/100 PC Card \(PCMPC100.*\)/"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
add Linksts EtherFast 10/100 PC Card (PCMPC100 V2) Submitted by: Ben Lutgens <blutgens@usinternet.com>
2000-11-21 07:01:24 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Logitec LPM-LN100TX 100BASE-TX Ethernet LAN CARD
card "Logitec" "LPM-LN100TX"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Logitec LPM-LN20T
card "Logitec" "LPM-LN20T"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Kingston KNE-PC2 (Nick Sayer)
2000-05-30 01:41:01 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Socket LP-E (WinCE Low Power Ethernet)
card "Low Power Ethernet LAN Adapter" "Socket Communications, Inc"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# ELECOM Laneed LD-CDWA (DP83902A), MACNICA Ethernet ME1 for JEIDA
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
card "MACNICA" "ME1-JEIDA"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xb8 # 08:00:42
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Matsushita Electric Industrial Co.,LTD. CF-VEL211P-B
card "Matsushita Electric Industrial Co.,LTD." "CF-VEL211"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:80:45
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# MELCO LPC2-T
card "MELCO" "LPC2-T"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# MELCO LPC2-TX
card "MELCO" "LPC2-TX"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add BUFFALO LPC3-CLX Submitted by: Takashi Ikeda <ccikeda@moon.aichi-u.ac.jp> Add TOSHIBA Ethernet Card LABCTA00A. Submitted by: "minoru kurata" <minoru.kurata@toshiba.co.jp> Obtained from: PAO3
2000-11-01 10:30:53 +00:00
# MELCO LPC3-TX
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
card "MELCO" "LPC3-TX"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ? 0x30000
fix MELCO LPC3-TX entry. I mistaked at 1.166. Submitted by: SARUMARU Yoshihiko <mistral@imasy.or.jp> Pointed out by: MORIYASU Hirano <m-hirano@konsei.co.jp> FreeBSD-users-jp 79808 FreeBSD-users-jp 79816
2004-06-05 06:11:54 +00:00
ether 0x1c8
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# National Semiconductor InfoMover 4100 and NE4100
card "National Semiconductor" "/InfoMover (NE)?4100/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 08:00:17
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add entry for BayNetworks NETGEAR FA410TXC Fast Ethernet. Poster had this in PAO format, so there might be a buglet in my conversion. Submitted by: Robert Withrow <bwithrow@nortelnetworks.com>
1999-11-05 11:17:23 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# NDC Ethernet Instant-Link NE2000 clone
card "NDC" "Ethernet"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ? 0x30
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add NE-2000 compatible card sold by addron. Submitted by: johs@copyleft.no
2001-09-09 23:10:38 +00:00
# Addtron NE-2000 compatible NIC
card "NE2000 Compatible PC Card" "PCMCIA"
config auto "ed" ? 0x10
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# NEC PC-9801N-J12
card "NEC" "PC-9801N-J12"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:00:4c
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Fix the entry for the NetGear FA410TX, which appears to have been committed untested (invalid syntax, and config index 0x1 does not appear to exist in the card as it currently ships).
1999-11-21 09:48:15 +00:00
# BayNetworks NETGEAR FA410TXC Fast Ethernet
card "NETGEAR" "FA410TX"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add the entry for my Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison). Add additional entries (might need a little tweaking) for the Xircom adapters. Xircom entries obtained from: http://www.lovett.com/lists/freebsd-xircom/
1999-05-14 03:52:07 +00:00
Add NetGEAR FA411 card. This appears to be based on the AX88190 chipset and works with those flags.
2001-09-09 20:31:26 +00:00
# BayNetworks NETGEAR FA411 Fast Ethernet
card "NETGEAR" "FA411"
config auto "ed" ? 0x30000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entry for Network Everywhere Ethernet 10BaseT PC Card. Submitted by: alfred
1999-11-05 11:21:19 +00:00
# Network Everywhere Ethernet 10BaseT PC Card
card "Network Everywhere" "Ethernet 10BaseT PC Card"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entry for Network Everywhere Ethernet 10BaseT PC Card. Submitted by: alfred
1999-11-05 11:21:19 +00:00
Kingston KNE-PC2 (Nick Sayer)
2000-05-30 01:41:01 +00:00
# Network Everywhere Ethernet Fast Ethernet 10/100 PC Card
card "Network Everywhere" "Fast Ethernet 10/100 PC Card"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Kingston KNE-PC2 (Nick Sayer)
2000-05-30 01:41:01 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# New Media Corporation LiveWire 10/100
card "New Media Corporation" "LiveWire 10/100"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# NextCom Next Hawk Etherneet Adapter
card "NextCom K.K." "Next Hawk"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Nihon Unisys, Ltd. JPF0400-ETH and JPF0400-LAN
card "Nihon Unisys, Ltd." "/JPF0400-(ETH|LAN)/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:80:45
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
o FreeSPirit ISDN/56K modem card o No-name OEM Prism card o ActionTec Prism card o ZoomAir 11Mbps High Rate wireless networking PR: 41929, 41928 Submitted by: Bruce M Simpson o Dynalink L100C16 PR: 41938 Submitted by: Marco van de Voort
2002-09-29 22:51:31 +00:00
# Nortel Networks BayStack 22 Ethernet 10/100 PC Card
card "Nortel" "BAYSTACK22-PCMCIA-ETHERNET"
config auto "ed" ? 0x30000
ether 0x1c8
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Longshire LCS-8634TB Submitted by: "Frank W. Josellis" <josellis@dynamics.claranet.de>
2001-12-27 03:59:21 +00:00
# Longshine LCS-8534TB
card "PCMCIA" "/^Ethernet$/"
config auto "ed" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# No-brand NE-2000 compatible card
card "PCMCIA" "ETHERNET V1.0"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
ether 0xff0
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Telecom Device SuperSocket HPC100
card "PCMCIA" "FastEthernet"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x30000
logstr "Telecom Device SuperSocket HPC100"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entry for Network Everywhere Ethernet 10BaseT PC Card. Submitted by: alfred
1999-11-05 11:21:19 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Billionton 10Base-TX ETHERNET PCCARD (aka UE2216)
Add IBM 56K Modem (PR 17992, Jeroen C. van Gelderen) Fix D-Link 660 entry (PR 1340, Annelise Anderson) Add more comments to very generic pcmcia ethernet card entry (PR 17006, Georg Graf) Add Linksys EtherFast 10/100 Intergrated PC Card (PCM100) (private mail from Sean O'Connell) PRs: 17006, 13402, 17992
2000-05-27 04:48:30 +00:00
# Also Genuius "Ethernet ME3000II SE"
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "PCMCIA" "PCMCIA-ETHERNET-CARD"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ? 0x10
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
logstr "UE2216"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Planet Smart COM 2000, Melco LPC-T
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "PCMCIA" "UE2212"
use ``config auto'' - Melco LPC-T (PIO mode) - AR-P500 ethernet card - Accton EN2226/Fast EtherCard (16-bit verison)
2000-10-02 14:41:09 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:00:e8
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
- Added entries for LinkSys ethernet card and Apex Data Modem. Submitted by: Ken Key <key@cs.utk.edu>
1997-12-05 04:33:58 +00:00
GVC 10Mbps Ethernet Card PR: 30329 Submitted by: David Xu <davidx@viasoft.com.cn>
2001-11-15 05:54:25 +00:00
# GVC 10Mbps Ethernet Card
card "PCMCIA" "Ethernet Card"
config auto "ed" ?
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
logstr "Generic PCMCIA Ethernet Card"
GVC 10Mbps Ethernet Card PR: 30329 Submitted by: David Xu <davidx@viasoft.com.cn>
2001-11-15 05:54:25 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Added entry for Billionton LM5LT-10N Fixed small typo Reviewed by: imp Approved by: imp
2003-07-22 21:23:01 +00:00
# Billionton LM5LT-10N
# Works as an Ethernet card
card "PCMCIA 10+56Combo" "LM5LT-10N"
config auto "ed" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# EXPsys PCMCIA Ethernet Combo, Relia PCMCIA Ethernet
card "PCMCIA LAN" "Ethernet"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
logstr "EXPsys Ethernet"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# LinkMates LM 336 LAN Fax/Modem PC Card (as Ethernet only)
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "PCMCIAs" "ComboCard"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x24 "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
logstr "LinkMates LM 336"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Telecom Device SuperSocket LM336 (as Ethernet only)
card "PCMCIAs" "LanModem"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config default "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
logstr "SuperSocket LM336"
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# PreMax PE-200 Ethernet Card
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/PMX */" "PE-200"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0x7f0 # 00:20:e0
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Psion Dacom Gold Card Ethernet Submitted by: Rick Hoppe
2002-09-30 01:07:28 +00:00
# Psion Dacom Gold Card Ethernet
card "Psion Dacom" "Gold Card Ethernet"
config auto "ed" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Psion Dacom Gold Card V34 Ethernet GSM
# as ethernet
card "Psion Dacom" "Gold Card V34 Ethernet GSM"
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# RIOS PC CARD3 ETHERNET
card "RIOS Systems Co." "PC CARD3 ETHERNET"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:00:48
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# RPTI EP401 Ethernet card
card "RPTI" "EP401 Ethernet NE2000 Compatible"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# SCM Ethernet Combo (*Not SMC :-)*)
card "SCM" "Ethernet Combo card"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:20:cb
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Epson EEN10B Ethernet Card
card "Seiko Epson Corp." "Ethernet"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0xff0 # 00:00:48
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
SMC EZ Card 10 PCMCIA Submitted by: Goncharov D <gda@sani.ru>
2001-09-09 23:13:59 +00:00
remove /etc/pccard_ether $device stop
EZCard, not EXCard
2001-09-09 23:40:28 +00:00
# SMC EXCard-10-PCMCIA
card "SMC" "EZCard-10-PCMCIA"
The EXCard-10-PCMCIA entry was slightly bogus.
2001-09-10 08:05:29 +00:00
config 0x20 "ed" ?
SMC EZ Card 10 PCMCIA Submitted by: Goncharov D <gda@sani.ru>
2001-09-09 23:13:59 +00:00
insert /etc/pccard_ether $device start
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# 3way 3WL-847-TX
card "SUN WAY" "3WL-847-TX 100BASE-TX"
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
config auto "ed" ? 0x80000
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Surecom EtherPerfect EP-427
card "TAMARACK" "Ethernet"
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Add TDK LAK-CD031. Submitted by: Tsuyoshi Hatakenaka <tsuyoshi@wni.co.jp>
2000-10-05 19:20:35 +00:00
# TDK LAK-CD031
card "TDK" "/LAK-CD031.*/"
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add TDK LAK-CD031. Submitted by: Tsuyoshi Hatakenaka <tsuyoshi@wni.co.jp>
2000-10-05 19:20:35 +00:00
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
# Telecom Device SuperSocket RE450T
card "Telecom Device K.K." "SuperSocket RE450T"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Linksys Fast Ethernet PCCARD cards supported by the ed driver now require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
2000-12-18 15:28:53 +00:00
# Telecom Device SuperSocket RE550T
card "Telecom Device K.K." "SuperSocket RE550T"
config auto "ed" ? 0x80000
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Toshiba Joho System PTJ-LAN/T
card "TJ" "Ethernet"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ? 0x10
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add BUFFALO LPC3-CLX Submitted by: Takashi Ikeda <ccikeda@moon.aichi-u.ac.jp> Add TOSHIBA Ethernet Card LABCTA00A. Submitted by: "minoru kurata" <minoru.kurata@toshiba.co.jp> Obtained from: PAO3
2000-11-01 10:30:53 +00:00
# XXX NOT SUPPORTED YET
# TOSHIBA LABCTA00A (Add `option TOSH_ETHER' line to your kernel
# configuration file and rebuilding kernel.)
#card "TOSHIBA" "LANCT00A"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config default "ed" ? 0x10
Add BUFFALO LPC3-CLX Submitted by: Takashi Ikeda <ccikeda@moon.aichi-u.ac.jp> Add TOSHIBA Ethernet Card LABCTA00A. Submitted by: "minoru kurata" <minoru.kurata@toshiba.co.jp> Obtained from: PAO3
2000-11-01 10:30:53 +00:00
# cardmem 0xd0000 0x0000 32k
## cardmem 0xd8000 0x0000 32k
# insert /etc/pccard_ether $device start
# remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Xircom CompactCard Ethernet 10 (CFE-10)
Add Xircom CompactCard Ethernet CFE-10 1.00. Seems to work great in the type II cf<->pccard adapter that came with the card. Others have reported with different chipsets for the pccard bridge that additional support is needed to make this card work with the 3.3 volts it needs.
2000-07-12 01:20:55 +00:00
card "Xircom" "CompactCard Ethernet"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "ed" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Xircom CompactCard Ethernet CFE-10 1.00. Seems to work great in the type II cf<->pccard adapter that came with the card. Others have reported with different chipsets for the pccard bridge that additional support is needed to make this card work with the 3.3 volts it needs.
2000-07-12 01:20:55 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## ep ##########
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# 3Com Fast Etherlink 3C574TX
card "3Com" "3C574-TX Fast EtherLink PC Card"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ep" ? 0x1
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# 3Com Megahertz 3CCFEM556BI, 3CXEM556 and model B
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# as ethernet
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
card "3Com" "/Megahertz 3C(CF|X)EM556/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config default "ep" ? 0x1
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# 3Com Megahertz 574B same as 3Com Fast Etherlink 3C574B
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "3Com" "Megahertz 574B"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ep" ? 0x1
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add two more cards: CNET CN40BC Ethernet adapter (ne2000 clone) Megahertz XJ32288 Submitted by: Juriy Goloveshkin <juriy@avias.com>
2000-03-07 08:51:39 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# 3Com Etherlink III 3CXE589EC and 3CXE589ET
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "3Com" "Megahertz 589E"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ep" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Minor nits and extra devices: o use ata2 consistanty, even though it doesn't matter too much o SunDisk (aka SanDisk) SDP's need a different config to actualy work (tested on the 10M part) by me. o Non-name ata card. o WIT IDE controller o IBM FLASH card o Megahert 28.8 cellular modem that I thought I'd added before. o LinkMake LM 336 combo modem/fax. Submitted by various people and gleaned from the nomads and mobile mailing lists, but I've lost the names. I'm sorry.
2000-03-07 04:52:49 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# 3Com OfficeConnect 3CXSH572BT
card "3Com" "OfficeConnect 572B"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ep" ? 0x1
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add entries for the Danpex EN-6200P2 and Megahertz XJ4336
1997-10-23 14:00:40 +00:00
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# 3Com Etherlink III 3C562 (as Network)
# Don't think this will work.
#card "3Com Corporation" "3C562"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config 0x9 "ep" ?
ep(4) does not have link0 and link1 options. PR: conf/46651 Submitted by: Eugene Grosbein <eugen@grosbein.pp.ru> Reviewed by: imp, mdodd MFC after: 1 week
2003-02-04 14:10:55 +00:00
# insert /etc/pccard_ether $device start
MFS: cosmetic changes use /etc/pccard_ether for Xircom CreditCard Netwave and 3Com Corporation" "3C562" (BUT NOT SUPPORTED). fix `card line' of RATOC REX-5572 (as SCSI only) use `config auto' for RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
2000-10-30 14:26:52 +00:00
# remove /etc/pccard_ether $device stop
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D
card "3Com Corporation" "/3C589/"
config auto "ep" ?
ep(4) does not have link0 and link1 options. PR: conf/46651 Submitted by: Eugene Grosbein <eugen@grosbein.pp.ru> Reviewed by: imp, mdodd MFC after: 1 week
2003-02-04 14:10:55 +00:00
insert /etc/pccard_ether $device start
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
remove /etc/pccard_ether $device stop
Add 'config auto' confirmed entries. Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>, YAMAMOTO Shigeru <shigeru@iij.ad.jp>, Masahide -mac- NODA <mac@clave.gr.jp>
2000-01-27 23:09:13 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Farallon EtherMac
card "Farallon" "ENet"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "ep" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Nokia Cellular Data Card DTP2 and DTP-2 ver II
1999-11-16 17:44:31 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## ex ##########
Add Nokia Cellular Data Card DTP2 and DTP-2 ver II
1999-11-16 17:44:31 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Olicom OC2220
card "Olicom" "Ethernet"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x1 "ex" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## fe ##########
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# CONTEC C-NET(PC)C Ethernet
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "CONTEC Co.,Ltd." "/C-NET\(PC\)C.*/"
config auto "fe" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0x58 # 00:80:4c
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Fujitsu MBH10303 Ethernet PCMCIA
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "EAGLE Technology" "/NE200 ETHERNET LAN MBH10303 */"
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
config auto "fe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
Merge latest cards from my laptop: o The Shining PMIDE-ASC card is also used in Road Warrior's Bullet Drive, so add that to the comments. o Eiger Lab's fujitsu based ethernet card: EPX-10BT (thanks to Ryan Losh for donating the card to the cause). o Add place holder entry for the 3Com Megahertz 3CXEM556. It doesn't work yet, but that will change in time.
2000-07-11 17:52:41 +00:00
# Eiger Labs EPX-10BT
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "Eiger labs,Inc." "EPX-10BT PC Card Ethernet 10BT"
config auto "fe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Fujitsu FMV-J182, FMV-J182A
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "FUJITSU" "LAN Card(FMV-J182)"
config auto "fe" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# These cards have same ID strings, and different MAC address
# locations.
# ether 0xf2c # 00:00:0e #FMV-J182
ether 0x1cc # 00:00:0e #FMV-J182A
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Fujitsu Towa LA501 Ethernet
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "FUJITSU TOWA" "LA501"
config auto "fe" ? 0x10
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0x332 # 00:00:0e
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Merge latest cards from my laptop: o The Shining PMIDE-ASC card is also used in Road Warrior's Bullet Drive, so add that to the comments. o Eiger Lab's fujitsu based ethernet card: EPX-10BT (thanks to Ryan Losh for donating the card to the cause). o Add place holder entry for the 3Com Megahertz 3CXEM556. It doesn't work yet, but that will change in time.
2000-07-11 17:52:41 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# HITACHI HT-4840-11
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "HITACHI" "HT-4840-11"
config auto "fe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# NextCom J Link NC5310
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "NextComK.K." "/NC5310 Ver1\.0.*/"
config auto "fe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# RATOC REX-5588, REX-9822, REX-4886
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "PCMCIA LAN MBH10304 ES" " 01"
config auto "fe" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# ether 0x32c # 00:c0:d0 # many minor revs....
# ether 0x328 # 00:c0:d0
ether 0x200 # 00:c0:d0
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Fujitsu MBH10302
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "PCMCIA MBH10302" "01"
config auto "fe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# RATOC REX-R280
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "RATOC System Inc." "10BASE_T CARD R280"
config auto "fe" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0x1fc # 00:c0:d0
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# TDK LAK-CD021, LAK-CD021A, LAK-CD021BX
"fe" driver was newbus'ify and bus_space'ify by nyan. comment-in "XXX NOT SUPPORTED YET" cards which was supported by "fe" driver.
2000-09-14 16:20:52 +00:00
card "TDK" "LAC-CD02x"
config auto "fe" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# These cards have same ID strings, and different MAC address
# locations.
# ether 0x92 # 00:80:98 # LAC-CD021, LAC-021A
# ether 0x96 # 00:80:98 # LAC-CD021BX
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## fdc ##########
# Libretto Floppy disk
card "Y-E DATA" "External FDD"
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
config 0x4 "fdc" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
########## gp ##########
# XXX NOT SUPPORTED YET
# National Instruments PCMCIA-GPIB Cards
#card "National Instruments" "PCMCIA-GPIB"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config default "gp" pio
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
########## hss ##########
# XXX NOT SUPPORTED YET
# Hitachi microcomputer speech synthesizer card
#card "/HITACHI MICROCOMPUTER SYSTEM LTD.*/" "MSSHVPC02"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config default "hss" pio
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
########## joy ##########
# IO DATA PCJOY
Some new cards: o uncommnent joy stuff (me) o Add BONDWELL B236 joystick card (me) o Add Buffalo WLI-CF-S11G wi card (me) o CNF CD-m (submitted by gda) Submitted by: Dmitry A Goncharov <gda@sani.ru>
2001-12-27 02:12:32 +00:00
card "IO DATA" "PCJOY"
config auto "joy" ?
# config 0x1 "joy" pio
# config 0x2 "joy" pio
# Game Card B236 by BONDWELL
card "BONDWELL" "B236"
config auto "joy" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
########## ncv ##########
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# New Media Corporation BASICS SCSI
# (Do not put this entry under Bustoaster)
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "BASICS by New Media Corporation" "SCSI Sym53C500"
config auto "ncv" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Media Intelligent SCSI-2 PC Card MSC-200
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "EPSON" "SCSI-2 PC Card SC200"
config auto "ncv" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
# KME (TAXAN ICD-400PN, etc.)
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "KME" "KXLC002"
config auto "ncv" ? 0xb4d00000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# KME KXLC004
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "KME" "KXLC004"
Change flags of ncv and nsp driver. Both were conflicted with the flags used in lower layer (scsi_low.c). The flag of ncv for KME KXLC004 was chaged from 0x1 to 0x100. The flag of nsp for PIO mode was chaged from 0x1 to 0x100.
2000-10-29 06:54:32 +00:00
config auto "ncv" ? 0xb4d00100
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# IO DATA PCSC-DV
# Macnica Miracle SCSI mPS100
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0"
config auto "ncv" ? 0xb6250000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Macnica Miracle SCSI-II mPS110
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "MACNICA" "MIRACLE SCSI-II mPS110"
config auto "ncv" ? 0
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# NEC PC-9801N-J03R
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "NEC" "PC-9801N-J03R"
config auto "ncv" ? 0
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Qlogic Fast SCSI
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "QLOGIC CORPORATION" "pc05"
config auto "ncv" ? 0x84d00000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# RATOC REX-9530
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "RATOC System Inc." "/SCSI2 CARD.*/"
config auto "ncv" ? 0x84d00000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# RATOC REX-5572 (as SCSI only)
MFS: cosmetic changes use /etc/pccard_ether for Xircom CreditCard Netwave and 3Com Corporation" "3C562" (BUT NOT SUPPORTED). fix `card line' of RATOC REX-5572 (as SCSI only) use `config auto' for RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
2000-10-30 14:26:52 +00:00
card "RATOC System Inc." "/SOUND/SCSI2 CARD.*/"
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
config auto "ncv" ? 0x84d00000
# cardio 0x640 0x10
iosize 16
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
########## nsp ##########
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# WORKBIT Ninja SCSI series
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "IO DATA" "/CBSC16 */"
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
config auto "nsp" ?
Added the KME SCSI-CARD-001 of a SCSI card (accessory of Hewlett Packard M820e CD-writer). Pointed out by: mitchy@er.ams.eng.osaka-u.ac.jp Submitted by: Stacy Millions <stacy@millions.ca>
2001-02-12 07:32:04 +00:00
# Hewlett Packard M820e (CD-writer)
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/KME */" "SCSI-CARD-001"
Added the KME SCSI-CARD-001 of a SCSI card (accessory of Hewlett Packard M820e CD-writer). Pointed out by: mitchy@er.ams.eng.osaka-u.ac.jp Submitted by: Stacy Millions <stacy@millions.ca>
2001-02-12 07:32:04 +00:00
config auto "nsp" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
# WORKBIT Ninja SCSI series
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "WBT" "NinjaSCSI-3"
config auto "nsp" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# WORKBIT Ninja SCSI series (PIO mode)
Comment out the entry for Workbit Ninja SCSI series in PIO mode. This confilcted with the entry of non PIO mode. If you want to use them in PIO mode comment out entry of the non PIO mode and uncommnet the PIO mode entry.
2000-10-27 13:59:16 +00:00
# (If you want to use them in PIO mode comment out above and uncommnet below.)
#card "WBT" "NinjaSCSI-3"
Change flags of ncv and nsp driver. Both were conflicted with the flags used in lower layer (scsi_low.c). The flag of ncv for KME KXLC004 was chaged from 0x1 to 0x100. The flag of nsp for PIO mode was chaged from 0x1 to 0x100.
2000-10-29 06:54:32 +00:00
# config auto "nsp" ? 0x100
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
########## opl ##########
# XXX NOT SUPPORTED YET
# RATOC REX-5570 Sound Card
#card "1195 RATOC System Inc." "REX5570 SOUND CARD"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config default "opl" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add webgear aviator card
2000-11-12 22:14:22 +00:00
########## ray ##########
# WebGEAR Aviator 2.4
card "WebGear" "PC Card WLAN Adapter"
config auto "ray" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add an entry for RAYLINK pccard using the ray driver. MFC after: 3 days
2001-05-17 19:55:11 +00:00
# Raytheon Raylink 802.11 Wireless LAN
card "RAYTHEON" "RayLink PC Card WLAN Adapter"
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
config auto "ray" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add an entry for RAYLINK pccard using the ray driver. MFC after: 3 days
2001-05-17 19:55:11 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
########## scc ##########
# XXX NOT SUPPORTED YET
# IBM Smart Capture Card
#card "IBM Corp." "Video Capture"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config default "scc" pio
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# cardmem 0xd4000 0x0 0x8000
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## sio ##########
# 3Com/USR/MegaHertz 3CCM156
card "3COM" "3CCM156"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# 3com/USR/Megahertz 3CCM556
card "3Com" "3CXM/3CCM556"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# 3Com Etherlink III 3C562 and 3C563 (as Modem)
card "3Com Corporation" "/3C56[23]/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x09 "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
# ADVANTECH COMpad-32/85 (dual port, but only one works)
card "ADVANTECH" "COMpad-32/85"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ? 0x330
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
# Apex Data 28.8 PC Card "MOBILE PLUS Cellular" modem.
card "AD PC_CARD" "RC288ACL"
config auto "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# AIWA PV-JF288
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "AIWA CO.,LTD." "/PV-JF288 */"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# AIWA PV-JF3356
card "AIWA CO.,LTD. MODEM" "PV-JF3356"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ? 0x40000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# APEX DATA MultiCard (as Modem only)
card "APEX DATA" "MULTICARD"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0xb "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Eiger 33.6 modem
card "AT&T" "V34+ Fax Modem"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# AT&T Paradyne KeepInTouch 14.4 modem
card "AT&T Paradyne" "KeepInTouch Card"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
reset 1000
# BUG Linkboy D64K (ISDN)
card "BUG Inc." "Linkboy D64K"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
o FreeSPirit ISDN/56K modem card o No-name OEM Prism card o ActionTec Prism card o ZoomAir 11Mbps High Rate wireless networking PR: 41929, 41928 Submitted by: Bruce M Simpson o Dynalink L100C16 PR: 41938 Submitted by: Marco van de Voort
2002-09-29 22:51:31 +00:00
# Portable Add Ons FreeSpirit 56K/ISDN Card
card "Portable Add Ons" "FreeSpirit Global 56K"
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
# NewMedia 14.4K FAX/Data Modem
card "CIRRUS LOGIC" "FAX MODEM"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# COM1 SA
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
card "COM1 SA" "/MC2(18|20) CARD/"
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# Digiteam Expresso 14.4 Modem
card "Digiteam GmbH" "Expresso Modem"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
# Eicon DIVA T/A
# at@menu Config menu
# at>vc View current profile
# at>vd View troubleshooting information
card "Eicon Technology" "DIVA T/A"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Woof. Had lots more of these than I thought when I started. Time to batch the rest: Add EXP DVD-780 DVD rom drive (brian reichert) Generic cdrom (???) Two modems eicon DIVA and com1 mc218 from oliver breuninger Farallon SkyLINE (Dirk-Willem van Gulik) Nits to the xe cards for xe driver!
2000-05-16 06:37:59 +00:00
add Ericsson DC23 GSM modem card PR: 18962
2000-07-10 08:21:54 +00:00
# Ericsson DC23 GSM modem card
card "ERICSSON" "Modem, DC23"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
add Ericsson DC23 GSM modem card PR: 18962
2000-07-10 08:21:54 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# GATEWAY 2000 FAX/Data Modem (14.4K)
card "GATEWAY2000" "CC3144"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Add an entry for the HAYES OPTIMA 28.8k
1998-09-25 22:08:53 +00:00
# This one does work though
card "HAYES" "OPT288"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Add an entry for the HAYES OPTIMA 28.8k
1998-09-25 22:08:53 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Hayes OPTIMA 288 FAX/Data Modem
# currently does not work on my machine
card "Hayes" "OPTIMA 288 + FAX fo"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
reset 10000
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# IBM Push/Pop Modem (14.4K)
card "IBM" "Push/Pop Modem(14.4K)"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Add IBM 56K Modem (PR 17992, Jeroen C. van Gelderen) Fix D-Link 660 entry (PR 1340, Annelise Anderson) Add more comments to very generic pcmcia ethernet card entry (PR 17006, Georg Graf) Add Linksys EtherFast 10/100 Intergrated PC Card (PCM100) (private mail from Sean O'Connell) PRs: 17006, 13402, 17992
2000-05-27 04:48:30 +00:00
# IBM 56k PCCCARD modem
card "IBM" "56K PC Card Modem"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Add IBM 56K Modem (PR 17992, Jeroen C. van Gelderen) Fix D-Link 660 entry (PR 1340, Annelise Anderson) Add more comments to very generic pcmcia ethernet card entry (PR 17006, Georg Graf) Add Linksys EtherFast 10/100 Intergrated PC Card (PCM100) (private mail from Sean O'Connell) PRs: 17006, 13402, 17992
2000-05-27 04:48:30 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem)
card "Intel" "EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x1f "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# US Robotics Worldport 14400
card "Intel" "MODEM 2400+"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# Intelligent SurfCard
card "Intelligent" "PCMCIA FAX+MODEM"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
reset 1000
# Megahertz XJEM3288 (as modem)
card "MEGAHERTZ" "CC/XJEM3288"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Megahertz XJEM1336 (as modem)
card "MEGAHERTZ" "CC/XJEM3336"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ?
- Added entry for Xircon CreditCard Modem. Submitted by: "Mike Del" <repenting@hotmail.com>
1998-06-08 21:10:41 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Megahertz XJ1144, XJ2144 (US and JP), XJ2288, XJ3288
card "MEGAHERTZ" "/XJ[0-9]+/"
config auto "sio" ?
Add network entry for Xircom Realport (Ethernet + modem). Submitted by: Nick Slager <nicks@albury.net.au>
1999-11-05 11:11:09 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Megahertz XJ-CC4288
card "Megahertz" "XJ-CC4288"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Megahertz XJ4336
card "Megahertz" "XJ4336-CC4336"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# XXX generic serial?
# Megahertz X-Jack Ethernet/Modem 14.4K (as Modem only)
card "Megahertz" "XJEM1144/CCEM1144"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x27 "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
# Motorola Montana
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "Motorola" "MONTANA 33.6 FAX/MODEM"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# XXX generic serial?
# Motorola Marine multifunction card (as modem)
card "Motorola, Inc." "MARINER MODEM/FAX/LAN"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x35 "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Added NTT ThunderCard Modem... (because I'm using it :-))
1998-02-24 13:32:36 +00:00
# NTT ThunderCard Modem
card "NTT-IT CO., LTD" "ThunderCard AVF288, V.34"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Added NTT ThunderCard Modem... (because I'm using it :-))
1998-02-24 13:32:36 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# NTT DoCoMo Mobile D Card 96P1
card "NTT DoCoMo" "Mobile D Card 96P1"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ? 0x82
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
# NTT DoCoMo (formerly NTT Personal) Paldio 611S
card "NTT DoCoMo" "PALDIO 611S PC CARD"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ? 0x40000
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
Add 'config auto' confirmed entries. Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>, YAMAMOTO Shigeru <shigeru@iij.ad.jp>, Masahide -mac- NODA <mac@clave.gr.jp>
2000-01-27 23:09:13 +00:00
# NTT DoCoMo DATA/FAX Adapter
card "NTT DoCoMo" "PCMCIA DATA/FAX ADAPTER 9600 Mark2"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# NTT DoCoMo DATA/FAX Adapter
card "NTT DoCoMo" "/PCMCIA DATA/FAX.*/"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ? 0x82
Add 'config auto' confirmed entries. Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>, YAMAMOTO Shigeru <shigeru@iij.ad.jp>, Masahide -mac- NODA <mac@clave.gr.jp>
2000-01-27 23:09:13 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# NTT-IT ThunderCard
card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ? 0x80
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
reset 1000
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio 321S
card "NTT Personal" "32K Paldio 321S PC CARD"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
# config auto "sio" ? 0x40000
Two PCCard Modem entries. o Fix entry for Megahertz XJ4336-CC4336. Old config (sio1) seems conflict with IrDA port or COM port on some laptop and sometimes totally hang up after insertion. o Add 'NTT DoCoMo Mobile D Card 96P1' which is used by many people in Japan. Reviewed by: imp
2000-01-24 12:12:37 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# NTT DoCoMo (formerly NTT Personal) FAX/Data 32K PHS Card Paldio 341S
card "NTT Personal" "32K Paldio 341S PC CARD"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# NTT Personal Paldio Data Card DC-1S
card "NTT Personal" "/Paldio Data.*/" "DC-1S"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ? 0x40000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Nokia Cellular Data Card DTP-2 and DTP-2 ver II
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# This Nokia example allows either 1 or 2 Nokia cards to be fitted.
# With 2 Mobile Phones and Multilink PPP you can get a 19200 data channel.
# Nokia Cellular Data Card
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
card "Nokia Mobile Phones" "/DTP-2( ver II)?/"
# config 0x23 "sio" ?
# config 0x24 "sio" ?
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Novalink NovaModem 144
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "NovaLink Tech." "/NovaModem 144 */"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# Novatel Merlin CDPD card (wireless modem)
card "Novatel Wireless" "Merlin Type II Wireless IP Modem"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Omron ME2814 FAX/DATA MODEM
card "OMRON" "ME2814 FAX/DATA MOD"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Omron MD24XCA FAX/Data Modem
card "OMRON Corp." "MD24XCA"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
# config auto "sio" pio
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
reset 10000
# Option International PCMCIA55K06
card "Option International" "GSM Data/Fax/SMS Modem"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Banksia CardModem 56
card "PCCardModem" "CardModem 56"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
# Eiger PCCARD modem
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Apparently this modem does not work unless the recommended
# init string (AT&F&C1&D2) is supplied.
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/PCMCIA */" "/33\.6K Fax/Modem */"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Add another modem (Psion Dacom) Submitted by: "Gary Palmer" <gpalmer@FreeBSD.ORG>
1998-12-15 02:57:30 +00:00
Add bits useful to getting laptops going (my Libretto in particular) Add ActionTec v.90 modem and Libretto Floppy to pccard database; Autoload pcic device.
1999-02-04 10:06:44 +00:00
# Actiontec Datalink with v.90 upgrade
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/PCMCIA */" "/56K V\.90 Fax Modem (LK) */"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Add bits useful to getting laptops going (my Libretto in particular) Add ActionTec v.90 modem and Libretto Floppy to pccard database; Autoload pcic device.
1999-02-04 10:06:44 +00:00
add Billionton 56Kbps Fax Modem PR: 18866
2000-07-10 08:31:14 +00:00
# Billionton 56Kbps Fax Modem
card "PCMCIA CARD 56KFaxModem" "FM56C-NFS"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
add Billionton 56Kbps Fax Modem PR: 18866
2000-07-10 08:31:14 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# PREMAX FM288 FAX/Data Modem
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "PREMAX" "/FM288 */"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Minor nits and extra devices: o use ata2 consistanty, even though it doesn't matter too much o SunDisk (aka SanDisk) SDP's need a different config to actualy work (tested on the 10M part) by me. o Non-name ata card. o WIT IDE controller o IBM FLASH card o Megahert 28.8 cellular modem that I thought I'd added before. o LinkMake LM 336 combo modem/fax. Submitted by various people and gleaned from the nomads and mobile mailing lists, but I've lost the names. I'm sorry.
2000-03-07 04:52:49 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Panasonic FM-RADIO card
card "Panasonic" "CF-JVR101"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
# config auto "sio" pio
Minor nits and extra devices: o use ata2 consistanty, even though it doesn't matter too much o SunDisk (aka SanDisk) SDP's need a different config to actualy work (tested on the 10M part) by me. o Non-name ata card. o WIT IDE controller o IBM FLASH card o Megahert 28.8 cellular modem that I thought I'd added before. o LinkMake LM 336 combo modem/fax. Submitted by various people and gleaned from the nomads and mobile mailing lists, but I've lost the names. I'm sorry.
2000-03-07 04:52:49 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Panasonic KX-PH402D
card "Panasonic" "KX-PH402D"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Minor nits and extra devices: o use ata2 consistanty, even though it doesn't matter too much o SunDisk (aka SanDisk) SDP's need a different config to actualy work (tested on the 10M part) by me. o Non-name ata card. o WIT IDE controller o IBM FLASH card o Megahert 28.8 cellular modem that I thought I'd added before. o LinkMake LM 336 combo modem/fax. Submitted by various people and gleaned from the nomads and mobile mailing lists, but I've lost the names. I'm sorry.
2000-03-07 04:52:49 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Panasonic Modem Card TO-706C
card "Panasonic" "TO-706C"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Panasonic Modem Card TO-706C
card "Panasonic" "TO-CAF288"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
# Panasonic TO-CAF56K FAX/Data Modem
card "Panasonic Co." "TO-CAF56K"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config auto "sio" pio
config auto "sio" ?
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
reset 10000
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Random modem bundled with Dell systems
card "Psion Dacom" "Gold Card Global 56K+Fax"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# RFI HotLine serial card
card "RFI" "RS-232 ComCard Rev.II"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# SII MC-6530, MC-6550 and MC-P200
card "SII" "/PHS (DATA|LINK) (32S|64)/"
add SII MC-P200 Submitted by: Shigeru Ishida <ishida@isl.intec.co.jp> bsd-nomads:14801
2000-11-13 03:16:58 +00:00
config auto "sio" ? 0x40000
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# TDK 14.4 FAX/Data Modem
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
card "TDK" "/DF1414(EX)? DATA/FAX MODEM/"
config auto "sio" ?
More cards from posts to -mobile.
2000-02-14 08:02:27 +00:00
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
# TDK DN1280R
card "TDK" "DN1280R"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ?
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
reset 1000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# TDK DP9600
card "TDK" "DP9600"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sio" ? 0x40000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# TDK Multifunctioon Card (as Modem)
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
card "TDK" "GlobalNetworker 3410/3412"
config auto "sio" ? 0x40000
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
I tested Toshiba Modem/LAN card IPC5001B (as Modem) and enable it. This card has `Network/LAN adapter' function ID(06 00), not Serial port/modem.
2000-08-10 13:24:12 +00:00
# Toshiba Modem/LAN card IPC5001B (as Modem)
card "TOSHIBA" "Modem/LAN Card"
config 0x25 "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
# 3Com/USR/Toshiba SLIMV90
card "TOSHIBA" "SLIMV90"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks)
card "Toshiba America" "3CXM056-BNW"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
PC-CARD hooks. Someday it will actually enable working code. :) Reviewed by: phk Submitted by: Tatsumi Hosokawa <hosokawa@mt.cs.keio.ac.jp> & BSD Nomads I re-wrote alot of this, but the ideas are based on the code from the most recent pccard-snapshot.
1996-03-12 15:39:26 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# U.S. Robotics XJ1560 and XJ1560J, Megahertz XJ1336
card "U.S. Robotics" "/XJ/CC1(336|560)J?/"
config auto "sio" ?
Add bits useful to getting laptops going (my Libretto in particular) Add ActionTec v.90 modem and Libretto Floppy to pccard database; Autoload pcic device.
1999-02-04 10:06:44 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# US Robotics Sportster PCMCIA V.34
# US Robotics COURIER PCMCIA V.34
card "USRobotics" "PCMCIA 28800 Data/F"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
# Viking V.90/K56Flex modem
card "Viking" "V.90 K56flex"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Xircom CreditCard Ethernet 10/100 + modem (modem part)
card "Xircom" "CreditCard Ethernet+Modem 33.6"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x23 "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Xircom GlobalACCESS modem
Comb through my mailboxes, trying to merge all the entries that others have set me. This goes from now back to sometime in January 2000. Last years' entries might result in more. But it will need to wait for another time. o XJEM3288 entry (Ron Rosson <insane@lunatic.oneinsane.net>) o Fix Xircom CreditCard Modem 56 entry ("Juriy Goloveshkin <juriy@avias.com> ") o Add pcmcia cd-rom entry from juriy as well, even though it doesn't work o Add Intellegent Modem (sos) o 3C562 entries (Marat Fayzullin <fms@cs.umd.edu>) o Digiteam expresso modem (joerg_wunsch) o RFI Hotline serial card (joerg_wunsch) o EP401 Ethernet (jkoshy) o Novatel wireless modem (nsayer) o Intel modem 2400+ (aka US Roboitcs Worldport 14400) (sos) o Option I18n GSM fax modem (markm) o Toshiba SLIMV90 (roberto)
2000-03-26 05:30:51 +00:00
card "Xircom" "CreditCard Modem 56 - GlobalACCESS"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Xircom CreditCard Modem
card "Xircom" "CreditCard Modem CM-56T"
use ``config auto "sio" ?'' for Xircom CreditCard Modem CM-56T PR: conf/23068 Submitted by: Matt <kienow@infinet.com>
2000-12-23 13:07:48 +00:00
config auto "sio" ?
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
reset 100
This is two new entries for Taiwanese 16bit PCMCIA cards. The Blue Concentric CF 802.11b card is a compactflash form-factored card that does 802.11b, including 128bit encryption. The Zonet modem pccard is a simple FAX/Modem card. Both are sold in Guang-Hua Market in Taipei, and functions perfectly with -current and -stable.
2002-05-07 16:50:15 +00:00
# Zonet 56Kbps FAX/Modem PC Card
card "PC CARD" "56Kbps Fax Modem PC Card"
config auto "sio" ?
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
# Zoom 56K modem
Reset the Zoom 56K modem when starting to use it. Failing to do so freezes your system. Submitted by:Sean O'Connell <sean@stat.Duke.EDU> (my hero)
1999-12-27 08:39:29 +00:00
# Freezes your system entirely if you don't have the reset..
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
card "Zoom Telephonics, Inc." "PCMCIA 56K LT DataFax"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sio" ?
Whitespace/TAB cleanups only.
2000-01-23 22:02:36 +00:00
reset 1000
Add entries for the following cards: Viking V.90/K56Flex modem Zoom 56K modem 3CCE589E* network card 3CCM156 modem Latter submitted by: Patrick Seal <patseal@hyperhost.net>
1999-02-22 03:06:28 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## sn ##########
Added Megahertz X-Jack Ethernet Card. (sorry, Warner, please merge it!) Obtained from: PAO
2000-01-21 09:26:13 +00:00
# Megahertz X-Jack Ethernet
card "Megahertz" "CC10BT/2"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sn" ?
Added Megahertz X-Jack Ethernet Card. (sorry, Warner, please merge it!) Obtained from: PAO
2000-01-21 09:26:13 +00:00
ether attr2
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Megahertz Ethernet Adapter
card "Megahertz" "ETHERNET ADAPTOR"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sn" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
ether attr2
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Added Corega Ether PCC-T. PR: conf/14297 Submitted by: sanpei@sanpei.org
2000-01-22 15:58:04 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# MELCO LPC-TX
card "MELCO/SMC" "LPC-TX"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "sn" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
ether 0x4a # 00:a0:dc
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# SMC EtherEZ Combo(SMC8020BT)
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
card "SMC" "EtherEZ Ethernet 8020"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sn" ?
# ether 0x9a # 00:00:c0
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Victor M-MOIL CARD
card "JVC" "MiniMoil Ethernet Card"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "sn" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Lots of entries culled from nomads (some of them may need additional patches to work properly). These are the ones I managed to save since the first of the year. While I tried to make sure all the entries would work, some of them were converted by hand from the PAO entries. MELCO LPC3-TX (Hiroshi Yamashita-san <bluemoon@msj.biglobe.ne.jp>) Allied Telesis CentreCOM LA100-PCM-T V2 (hideaki yoshimura-san <Hideaki_Yoshimura@YAM-YAMASYS5.ccgw.nec.co.jp>) Planex FNW-3600-T (Satoru Sawada-san <sawada@angel.ne.jp>) Planex FNW-3700-T (Shigeru Ishida-san <ishida@isl.intec.co.jp>) ADVANTECH COMpad-32/85 (Kuo Chun Fan-san) (one of two ports) TDK DN1280R (Toshihisa Eto-san <eto@clave.gr.jp> and <masahiro@inet.isogo.yokohama.jp> Masahiro Higuchi-san) Panasonic TO-CAF56K FAX/Data Modem (katsutoshi ito <itokatsu@mns.lsi.melco.co.jp>) NTT DoCoMo (formerly NTT Personal) Paldio 611S (Yoshihiko SARUMARU-san <mistral@imasy.or.jp>) KME (TAXAN ICD-400PN, etc.) (ncv not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) WORKBIT Ninja SCSI series (nsp not in tree yet) (HASEGAWA-san Tomoki <thasegawa@mta.biglobe.ne.jp>) SMC EtherEZ Combo (Masanori Takeishi-san <marina@yaya.forks.co.jp>) KANSAI ELECTRIC KLA-PCM/T (Hideaki FUKUI-san <hideman@infosakyu.ne.jp>) Plus Two cards from Kazuya Kodama-san <kodama@rd.nacsis.ac.jp> which were in the last commit.
2000-05-30 05:28:14 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## spc ##########
More cards from posts to -mobile.
2000-02-14 08:02:27 +00:00
-Change manufacture ID for REX-5535AC, REX-5535X, REX-9835X, and REX-9835Z from "PCMCIA SCSI MBH1040" to "PCMCIA SCSI MBH10401" "01". They are based on the spc driver. This will fix the conflicts of entry with REX-5536AM, REX-9836A, and ICM PSC-2401 ("MBH10404" ones) which are based on stg driver. The problem was pointed out in bsd-nomads several times since PAO2 days. -Comment out the entry for "MBH10401" ones. The spc driver is not supported yet. -Add more comment about cards which has broken CIS (some cards which has tuple of "PCMCIA SCSI MBH10404" "01"). Reported by: takachan@running-dog.net, y-nakaga@nwsl.mesh.ad.jp, yuki@dayo.ne.jp Obtained from: discussion in bsd-nomads mailing list
2000-12-13 13:29:16 +00:00
# XXX NOT SUPPORTED YET
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# REX5535AC, REX5535X SCSI
-Change manufacture ID for REX-5535AC, REX-5535X, REX-9835X, and REX-9835Z from "PCMCIA SCSI MBH1040" to "PCMCIA SCSI MBH10401" "01". They are based on the spc driver. This will fix the conflicts of entry with REX-5536AM, REX-9836A, and ICM PSC-2401 ("MBH10404" ones) which are based on stg driver. The problem was pointed out in bsd-nomads several times since PAO2 days. -Comment out the entry for "MBH10401" ones. The spc driver is not supported yet. -Add more comment about cards which has broken CIS (some cards which has tuple of "PCMCIA SCSI MBH10404" "01"). Reported by: takachan@running-dog.net, y-nakaga@nwsl.mesh.ad.jp, yuki@dayo.ne.jp Obtained from: discussion in bsd-nomads mailing list
2000-12-13 13:29:16 +00:00
#card "PCMCIA SCSI MBH10401" "01"
# config 0x3a "spc" ?
Added Planex FNW-3600-T 16bit FastEthernet.
2000-01-22 19:02:47 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
########## stg ##########
# RATOC REX-5536, Melco IFC-SC
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "1195 RATOC System Inc." "REX5536 SCSI2 CARD"
config auto "stg" ? 0
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# Future Domain SCSI2GO
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "Future Domain Corporation" "SCSI PCMCIA Credit Card Controller"
config auto "stg" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# IBM SCSI PCMCIA Card
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "IBM Corp." "SCSI PCMCIA Card"
config auto "stg" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
# There's a buggy revision of this card which has broken CIS tupples.
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
# If you can't use this card, change config entry from `auto' to
-Change manufacture ID for REX-5535AC, REX-5535X, REX-9835X, and REX-9835Z from "PCMCIA SCSI MBH1040" to "PCMCIA SCSI MBH10401" "01". They are based on the spc driver. This will fix the conflicts of entry with REX-5536AM, REX-9836A, and ICM PSC-2401 ("MBH10404" ones) which are based on stg driver. The problem was pointed out in bsd-nomads several times since PAO2 days. -Comment out the entry for "MBH10401" ones. The spc driver is not supported yet. -Add more comment about cards which has broken CIS (some cards which has tuple of "PCMCIA SCSI MBH10404" "01"). Reported by: takachan@running-dog.net, y-nakaga@nwsl.mesh.ad.jp, yuki@dayo.ne.jp Obtained from: discussion in bsd-nomads mailing list
2000-12-13 13:29:16 +00:00
# `default' and try the point enabler. (for example,
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# type "pccardc enabler 0 stg0 -a 0x4140 -i 5" from root command prompt)
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "PCMCIA SCSI MBH10404" "01"
-Change manufacture ID for REX-5535AC, REX-5535X, REX-9835X, and REX-9835Z from "PCMCIA SCSI MBH1040" to "PCMCIA SCSI MBH10401" "01". They are based on the spc driver. This will fix the conflicts of entry with REX-5536AM, REX-9836A, and ICM PSC-2401 ("MBH10404" ones) which are based on stg driver. The problem was pointed out in bsd-nomads several times since PAO2 days. -Comment out the entry for "MBH10401" ones. The spc driver is not supported yet. -Add more comment about cards which has broken CIS (some cards which has tuple of "PCMCIA SCSI MBH10404" "01"). Reported by: takachan@running-dog.net, y-nakaga@nwsl.mesh.ad.jp, yuki@dayo.ne.jp Obtained from: discussion in bsd-nomads mailing list
2000-12-13 13:29:16 +00:00
# config default "stg" ?
MFS: cosmetic changes use /etc/pccard_ether for Xircom CreditCard Netwave and 3Com Corporation" "3C562" (BUT NOT SUPPORTED). fix `card line' of RATOC REX-5572 (as SCSI only) use `config auto' for RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
2000-10-30 14:26:52 +00:00
config auto "stg" ?
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
logstr "RATOC REX-5536AM SCSI"
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# RATOC REX-5536M
Uncommnet entries for PC-Cards which are supposed work with ncv, nsp, and stg drivers. Also all config indexes for these cards are changed to auto. Note, still if you would like to use cards which has a comment; # (Do not put this entry under Bustoaster) you need some quick hack. Uncomment the entry above. Reviewed by: sanpei@FreeBSD.org
2000-10-26 11:25:10 +00:00
card "PCMCIA SCSI2 CARD" "01"
config auto "stg" ? 0
logstr "RATOC REX-5536M SCSI"
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add Digital Roamabout. This is for the wlp driver, not yet ported from PAO, but I don't want to lose this entry. Submitted by: Randy Bush
2000-05-30 06:05:10 +00:00
########## wlp ##########
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# XXX NOT SUPPORTED YET
# AT&T GIS Wavelan PCMCIA
# If you want to use Japanese version, uncomment the second config
# line and comment-out the first line.
#card "AT&T" "WaveLAN/PCMCIA"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config default "wlp" ? # US version (915MHz)
## config default "wlp" ? 0x01 # Japanese version (2.4GHz)
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
## ether wavelan
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
# insert /etc/pccard_ether $device start
# remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# XXX NOT SUPPORTED YET
Add Digital Roamabout. This is for the wlp driver, not yet ported from PAO, but I don't want to lose this entry. Submitted by: Randy Bush
2000-05-30 06:05:10 +00:00
# Digital RoamAbout
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
#card "Digital" "RoamAbout/DS"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config auto "wlp" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
## ether wavelan
# insert /usr/sbin/wlpconfig -i wlp0 -w 0xaaaa
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
# insert /etc/pccard_ether $device start
# remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# XXX NOT SUPPORTED YET
# Lucent Wavelan
#card "Lucent Technologies" "WaveLAN/PCMCIA"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config default "wlp" ?
Add Digital Roamabout. This is for the wlp driver, not yet ported from PAO, but I don't want to lose this entry. Submitted by: Randy Bush
2000-05-30 06:05:10 +00:00
# ether wavelan
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
# insert /etc/pccard_ether $device start
# remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# XXX NOT SUPPORTED YET
# NCR Wavelan PCMCIA
# If you want to use Japanese version, uncomment the second config
# line and comment-out the first line.
#card "NCR" "WaveLAN/PCMCIA"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config default "wlp" ? # US version (915MHz)
## config default "wlp" ? 0x01 # Japanese version (2.4GHz)
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# ether wavelan
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
# insert /etc/pccard_ether $device start
# remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add Digital Roamabout. This is for the wlp driver, not yet ported from PAO, but I don't want to lose this entry. Submitted by: Randy Bush
2000-05-30 06:05:10 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## wi ##########
Added IC-CARD+ Ethernet card.
2000-01-23 03:00:04 +00:00
o FreeSPirit ISDN/56K modem card o No-name OEM Prism card o ActionTec Prism card o ZoomAir 11Mbps High Rate wireless networking PR: 41929, 41928 Submitted by: Bruce M Simpson o Dynalink L100C16 PR: 41938 Submitted by: Marco van de Voort
2002-09-29 22:51:31 +00:00
# OEM ID 0x5 unlabelled PRISM2.5 card
card " " "IEEE 802.11 Wireless LAN/PC Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add some devices: Xircom CreditCard Netwave cnw Intel PRO/Wireless 2011 (PRISM II) wi 3COM 3CRWE737A (PRISM II) wi Note: I've had some reports that the latter two cards work, but I've not been able to get them to work for me.
2001-03-16 07:36:54 +00:00
# 3com 3crwe737A AirConnect Wireless LAN PC Card
card "3Com" "3CRWE737A AirConnect Wireless LAN PC Card"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Add some devices: Xircom CreditCard Netwave cnw Intel PRO/Wireless 2011 (PRISM II) wi 3COM 3CRWE737A (PRISM II) wi Note: I've had some reports that the latter two cards work, but I've not been able to get them to work for me.
2001-03-16 07:36:54 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add: Accton airDirect WN3301 Melco WLI-CF-S11G GeoWave GW-NS11S Submitted by: Shigeru Ishida-san on bsd-nomads (16142,16143,16144)
2002-01-18 03:49:03 +00:00
# Accton airDirect WN3301
card "Accton" "IEEE802.11 PC Card Adapter"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
o FreeSPirit ISDN/56K modem card o No-name OEM Prism card o ActionTec Prism card o ZoomAir 11Mbps High Rate wireless networking PR: 41929, 41928 Submitted by: Bruce M Simpson o Dynalink L100C16 PR: 41938 Submitted by: Marco van de Voort
2002-09-29 22:51:31 +00:00
# Actiontec PRISM wireless
card "ACTIONTEC" "PRISM Wireless LAN PC Card"
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
config auto "wi" ?
o FreeSPirit ISDN/56K modem card o No-name OEM Prism card o ActionTec Prism card o ZoomAir 11Mbps High Rate wireless networking PR: 41929, 41928 Submitted by: Bruce M Simpson o Dynalink L100C16 PR: 41938 Submitted by: Marco van de Voort
2002-09-29 22:51:31 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Addtron AWP-100 wireless card. Submitted by: Alfred Perlstein <bright@mu.org>
2001-09-09 23:42:26 +00:00
# Addtron AWP-100
card "Addtron" "AWP-100 Wireless PCMCIA"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Addtron AWP-100 wireless card. Submitted by: Alfred Perlstein <bright@mu.org>
2001-09-09 23:42:26 +00:00
insert /etc/pccard_ether $device start
Avaya Wireless PCCARD Submitted by: Ants Aader <ants@kernel.ee>
2001-11-19 01:51:40 +00:00
remove /etc/pccard_ether $device stop
Add ADLINK340C wireless card mentioned in nomads. # This card has the same PCMCIA and OEM id as ELSA XI300 wireless card, which # appears to be listed elsewhere in this file. Submitted by: Abe Toshiaki-san <ans@sun-tec.co.jp> MFC After: 5 days
2002-01-28 04:46:20 +00:00
# ADLINK340APC
card "ADTEC" "ADLINK/340C"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Home Wireless Network Airway wireless card
2002-03-18 04:51:01 +00:00
# Home Wireless Networks
card "AirWay" "802.11 Adapter (PCMCIA)"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Allied Telesis WR211PCM.
2003-01-17 18:50:00 +00:00
# Allied Telesis WR211PCM
card "Allied Telesis K.K." "WR211PCM"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Avaya Wireless PCCARD Submitted by: Ants Aader <ants@kernel.ee>
2001-11-19 01:51:40 +00:00
# Avaya Wireless PC Card
card "Avaya Communication" "Avaya Wireless PC Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
Addtron AWP-100 wireless card. Submitted by: Alfred Perlstein <bright@mu.org>
2001-09-09 23:42:26 +00:00
remove /etc/pccard_ether $device stop
o Belkin wireless card PR: 38919 Submitted by: Tommy Johnson o IBM IDE CDROM PR: 39537 Submitted by: Kevin Van Maren o T-Sunus 130 card PR: 41802 Submitted by: Oliver Schneider
2002-09-29 23:13:08 +00:00
# Belkin wireless card
card "Belkin" "11Mbps Wireless Notebook Network Adapter"
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
config auto "wi" ?
o Belkin wireless card PR: 38919 Submitted by: Tommy Johnson o IBM IDE CDROM PR: 39537 Submitted by: Kevin Van Maren o T-Sunus 130 card PR: 41802 Submitted by: Oliver Schneider
2002-09-29 23:13:08 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add ELSA Vianect WLAN (Marco Wertejuk) benq awl100 (David Leemans) ObTerminalRoomCommit: done!
2003-09-10 01:14:07 +00:00
# Benq AWL100 wireless 11 Mbps pcmcia card
card "BENQ" "AWL100 PCMCIA ADAPTER"
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
config auto "wi" ?
add ELSA Vianect WLAN (Marco Wertejuk) benq awl100 (David Leemans) ObTerminalRoomCommit: done!
2003-09-10 01:14:07 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add BreezeNET PC-DS.11. It is yet another wireless card. Submitted by: Danny Braniss <danny@cs.huji.ac.il>
2001-06-22 03:17:25 +00:00
# BreezeNET
card "BreezeNET" "PC-DS.11"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Some new cards: o uncommnent joy stuff (me) o Add BONDWELL B236 joystick card (me) o Add Buffalo WLI-CF-S11G wi card (me) o CNF CD-m (submitted by gda) Submitted by: Dmitry A Goncharov <gda@sani.ru>
2001-12-27 02:12:32 +00:00
# Buffalo WLI-CF-S11G
card "BUFFALO" "WLI-CF-S11G"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Add: Accton airDirect WN3301 Melco WLI-CF-S11G GeoWave GW-NS11S Submitted by: Shigeru Ishida-san on bsd-nomads (16142,16143,16144)
2002-01-18 03:49:03 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
# Melco Airconnect 3.3V version
card "BUFFALO" "WLI-PCM-S11"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Some new cards: o uncommnent joy stuff (me) o Add BONDWELL B236 joystick card (me) o Add Buffalo WLI-CF-S11G wi card (me) o CNF CD-m (submitted by gda) Submitted by: Dmitry A Goncharov <gda@sani.ru>
2001-12-27 02:12:32 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add BreezeNET PC-DS.11. It is yet another wireless card. Submitted by: Danny Braniss <danny@cs.huji.ac.il>
2001-06-22 03:17:25 +00:00
Add Proxim Harmony card (from Bob) Also fix a minor disordering of a wi card while I'm here. Submitted by: bob bobing <this_is_my_act@yahoo.com>
2001-12-28 03:34:05 +00:00
# Melco Airconnect (128bit WEP)
card "BUFFALO" "WLI-PCM-L11G"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Cabletron RoamAbout, WaveLAN/IEEE clone
card "Cabletron" "RoamAbout 802.11 DS"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x1 "wi" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add three entries: # Apollo PCMCIA Ethernet Adapter # Olicom OC2220 # National Semiconductor InfoMover NE4100 I forgot who submitted the first two, but the third one was submitted by Jim Bloom.
2000-01-29 02:04:16 +00:00
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
# Compaq WL100
card "Compaq" "WL100_11Mbps_Wireless_PC_Card"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "wi" ?
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Compaq WL110 PC Card to the list. PR: 31023 Submitted by: wilko
2001-11-15 05:49:18 +00:00
# Compaq WL110
card "Compaq" "Compaq WL110 PC Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
The Compaq WL200 is a CL-PD6729 based pci card with a prism 2 pcmcia card behind it (without the pcmcia form factor). This entry gets to the point of attaching, but there's something wrong with the '29 support, so it doesn't quite work yet.
2002-07-18 06:01:35 +00:00
# Compaq WL200
Either compaq has two variants of the WL200, or the old entry is wrong. Go ahead and include a second entry for the WL200 until I can sort this out. Submitted by: Matt Pearce
2003-01-10 18:35:20 +00:00
card "Compaq" "WL200_11Mbps_Wireless_PCI_Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
# Compaq WL200 (might be wrong)
The Compaq WL200 is a CL-PD6729 based pci card with a prism 2 pcmcia card behind it (without the pcmcia form factor). This entry gets to the point of attaching, but there's something wrong with the '29 support, so it doesn't quite work yet.
2002-07-18 06:01:35 +00:00
card "Compaq" "Compaq WL200_11Mbps_Wireless_PCI_Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
# Corega KK Wireless LAN PCC-11
card "corega K.K." "Wireless LAN PCC-11"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "wi" ?
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add PC-Card entry Corega KK Wireless LAN PCCA-11 NEC WL11C (PC-WL/11C) NEC Corporation PK-WL001 Submitted by: [bsd-nomads:15128] [bsd-nomads:15159] [bsd-nomads:15176] [bsd-nomads:15283] YAMAMOTO Shigeru <shigeru@iij.ad.jp> NAKAGAWA Yoshihisa <y-nakaga@nwsl.mesh.ad.jp>
2001-03-07 13:30:44 +00:00
# Corega KK Wireless LAN PCCA-11
card "corega K.K." "Wireless LAN PCCA-11"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
add PC-Card entry Corega KK Wireless LAN PCCA-11 NEC WL11C (PC-WL/11C) NEC Corporation PK-WL001 Submitted by: [bsd-nomads:15128] [bsd-nomads:15159] [bsd-nomads:15176] [bsd-nomads:15283] YAMAMOTO Shigeru <shigeru@iij.ad.jp> NAKAGAWA Yoshihisa <y-nakaga@nwsl.mesh.ad.jp>
2001-03-07 13:30:44 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Correct Corega KK Wireless entry
2002-01-12 07:01:51 +00:00
# Corega KK Wireless LAN PCCB-11
o Add T-POWER flash Submitted by: Michael Johansson <micke@nevermind.net> o Sony PCWA-C100 WaveLAN card Submitted by: "Jeremiah Gowdy" <jgowdy@home.com> o Corega KK Wireless LAN PCCA-11 (version b?) Submitted by: Masahide *MAC* Noda <mac@clave.gr.jp>
2002-01-10 18:53:00 +00:00
card "corega_K.K." "Wireless_LAN_PCCB-11"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
o Add T-POWER flash Submitted by: Michael Johansson <micke@nevermind.net> o Sony PCWA-C100 WaveLAN card Submitted by: "Jeremiah Gowdy" <jgowdy@home.com> o Corega KK Wireless LAN PCCA-11 (version b?) Submitted by: Masahide *MAC* Noda <mac@clave.gr.jp>
2002-01-10 18:53:00 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add an entry for corega WL PCCL-11. PR: conf/42481 Submitted by: NINOMIYA Hideyuki <nin@jp.FreeBSD.org> Approved by: imp MFC after: 1 week
2002-09-06 17:45:36 +00:00
# Corega KK Wireless LAN PCCL-11
card "corega" "WL PCCL-11"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add support for card "D" "Link DWL-650 11Mbps WLAN Card" which is the most amusing CIS mistake I've seen in some time. # I'm using this card to make this commit!
2001-05-25 02:24:15 +00:00
# D Link DWL-650 11Mbps WLAN Card
card "D" "Link DWL-650 11Mbps WLAN Card"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Add support for card "D" "Link DWL-650 11Mbps WLAN Card" which is the most amusing CIS mistake I've seen in some time. # I'm using this card to make this commit!
2001-05-25 02:24:15 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add an entry for the Dlink Air 660 Wireless PC Card. PR: 46977 Submitted by: gioria Approved by: imp
2003-01-14 00:50:30 +00:00
# DLink Air DWL-660 Wireless PC Card
card "D-Link" "D-Link Air DWL-660 Wireless PC Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add dell wireless card Submitted by: keichi
2001-06-26 20:44:27 +00:00
# Dell TrueMobile (OEMed Lucent WaveLAN/IEEE)
card "Dell" "TrueMobile 1150 Series PC Card"
config 0x1 "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add new version of ELECOM Air@Hawk/LD-WL11/PCC (Yasuhiro Magara <gama@rose.zero.ad.jp> in [bsd-nomads:14588]) add "wi" cards into HARDWARE.TXT and RELNOTES.TXT
2000-10-10 14:27:30 +00:00
# ELECOM Air@Hawk/LD-WL11/PCC (0.7.5)
add ELECOM Air@Hark/LD-WL11/PCC card add NEC Wireless Card CMZ-RT-WP card Obtained from: [bsd-nomads:13988] by YAMAMOTO Shigeru <shigeru@iij.ad.jp> sort Farallon Skyline 11Mbps Wireless entory
2000-08-28 14:15:24 +00:00
card "ELECOM" "Air@Hark/LD-WL11/PCC"
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add ELECOM Air@Hark/LD-WL11/PCC card add NEC Wireless Card CMZ-RT-WP card Obtained from: [bsd-nomads:13988] by YAMAMOTO Shigeru <shigeru@iij.ad.jp> sort Farallon Skyline 11Mbps Wireless entory
2000-08-28 14:15:24 +00:00
add new version of ELECOM Air@Hawk/LD-WL11/PCC (Yasuhiro Magara <gama@rose.zero.ad.jp> in [bsd-nomads:14588]) add "wi" cards into HARDWARE.TXT and RELNOTES.TXT
2000-10-10 14:27:30 +00:00
# ELECOM Air@Hawk/LD-WL11/PCC (0.7.6 and later)
card "ELECOM" "Air@Hawk/LD-WL11/PCC"
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add some devices: Xircom CreditCard Netwave cnw Intel PRO/Wireless 2011 (PRISM II) wi 3COM 3CRWE737A (PRISM II) wi Note: I've had some reports that the latter two cards work, but I've not been able to get them to work for me.
2001-03-16 07:36:54 +00:00
Typo s/AirLAncer/AirLancer/g
2001-09-10 08:14:00 +00:00
# ELSA Air Lancer
card "ELSA" "AirLancer MC-11"
ELSA Air Lancer wireless card. Appears to be a Lucent OEM. Submitted by: Eric Masson <e-masson@kisoft-services.com>
2001-09-10 03:18:21 +00:00
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add ELSA Vianect WLAN (Marco Wertejuk) benq awl100 (David Leemans) ObTerminalRoomCommit: done!
2003-09-10 01:14:07 +00:00
# ELSA Vianect
card "ELSA" "Vianect WLAN MC-11"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Another prism2 card (not sure what, if anything, is needed for >=5) Pr: 43805
2005-01-11 00:40:00 +00:00
# FriendlyNet AeroLAN 802.11b
card "FriendlyNET AeroLAN Wireless PCMCIA Adapter " " "
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add: Accton airDirect WN3301 Melco WLI-CF-S11G GeoWave GW-NS11S Submitted by: Shigeru Ishida-san on bsd-nomads (16142,16143,16144)
2002-01-18 03:49:03 +00:00
# PLANEX GeoWave/GW-NS11S
card "Geowave" "GW-NS11S"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add support for linksys instant wireless. Approved by: imp
2001-06-26 18:22:12 +00:00
# Linksys Instant Wireless WPC11
Use the regular expression form to solve the ambiguous card parameters which have tailing spaces. Some card entries had problem because of incorrect number of spaces. Approved by: imp MFC after: 1 week
2002-02-23 16:38:45 +00:00
card "/Instant Wireless */" " Network PC CARD"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Add support for linksys instant wireless. Approved by: imp
2001-06-26 18:22:12 +00:00
insert /etc/pccard_ether $device start
stpo --> stop (typo).
2001-06-26 23:19:45 +00:00
remove /etc/pccard_ether $device stop
Add support for linksys instant wireless. Approved by: imp
2001-06-26 18:22:12 +00:00
Add some devices: Xircom CreditCard Netwave cnw Intel PRO/Wireless 2011 (PRISM II) wi 3COM 3CRWE737A (PRISM II) wi Note: I've had some reports that the latter two cards work, but I've not been able to get them to work for me.
2001-03-16 07:36:54 +00:00
# Intel PRO/Wireless 2011 LAN PC Card
card "Intel" "PRO/Wireless 2011 LAN PC Card"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Add some devices: Xircom CreditCard Netwave cnw Intel PRO/Wireless 2011 (PRISM II) wi 3COM 3CRWE737A (PRISM II) wi Note: I've had some reports that the latter two cards work, but I've not been able to get them to work for me.
2001-03-16 07:36:54 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add new version of ELECOM Air@Hawk/LD-WL11/PCC (Yasuhiro Magara <gama@rose.zero.ad.jp> in [bsd-nomads:14588]) add "wi" cards into HARDWARE.TXT and RELNOTES.TXT
2000-10-10 14:27:30 +00:00
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
# ICOM SL-1100
card "ICOM" "SL-1100"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "wi" ?
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add ELECOM Air@Hark/LD-WL11/PCC card add NEC Wireless Card CMZ-RT-WP card Obtained from: [bsd-nomads:13988] by YAMAMOTO Shigeru <shigeru@iij.ad.jp> sort Farallon Skyline 11Mbps Wireless entory
2000-08-28 14:15:24 +00:00
# Farallon Skyline 11Mbps Wireless
card "INTERSIL" "HFA384x/IEEE"
config 0x1 "wi" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add ELECOM Air@Hark/LD-WL11/PCC card add NEC Wireless Card CMZ-RT-WP card Obtained from: [bsd-nomads:13988] by YAMAMOTO Shigeru <shigeru@iij.ad.jp> sort Farallon Skyline 11Mbps Wireless entory
2000-08-28 14:15:24 +00:00
add new PC-Card entry, IO Data WN-B11/PCM Submitted by: [FreeBSD-users-jp 59373] "Masatake E. Hori" <eddie@luft.geo.tsukuba.ac.jp>
2001-03-07 00:58:52 +00:00
# IO Data WN-B11/PCM
card "IO DATA" "WNB11PCM"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
add new PC-Card entry, IO Data WN-B11/PCM Submitted by: [FreeBSD-users-jp 59373] "Masatake E. Hori" <eddie@luft.geo.tsukuba.ac.jp>
2001-03-07 00:58:52 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add IBM "High Rate Wireless LAN PC Card", a rebadged Lucent WaveLAN/IEEE. MFC after: 2 weeks
2001-06-19 01:21:22 +00:00
# IBM's rebadged Lucent WaveLAN/IEEE. The FCC IDs are identical to
# those for the Lucent card, so presumably everything else is as well.
card "IBM Corporation" "IBM High Rate Wireless LAN PC Card"
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
config 0x1 "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add IBM "High Rate Wireless LAN PC Card", a rebadged Lucent WaveLAN/IEEE. MFC after: 2 weeks
2001-06-19 01:21:22 +00:00
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# Lucent WaveLAN/IEEE
card "Lucent Technologies" "WaveLAN/IEEE"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x1 "wi" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add three entries: # Apollo PCMCIA Ethernet Adapter # Olicom OC2220 # National Semiconductor InfoMover NE4100 I forgot who submitted the first two, but the third one was submitted by Jim Bloom.
2000-01-29 02:04:16 +00:00
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
# Melco Airconnect
card "MELCO" "WLI-PCM-L11"
use ``config auto "wi" ?'' for MELCO/WLI-PCM-L11 Submitted by: susumu.wakabayashi@ntt.com
2000-11-28 14:11:49 +00:00
config auto "wi" ?
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
# nanospeed card of some flavor.
card "NANOSPEED" "HFA384x/IEEE"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
# NCR WaveLAN/IEEE
card "NCR" "WaveLAN/IEEE"
use ``config auto'' for NCR WaveLAN/IEEE
2000-10-17 06:20:21 +00:00
config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add three entries: # Apollo PCMCIA Ethernet Adapter # Olicom OC2220 # National Semiconductor InfoMover NE4100 I forgot who submitted the first two, but the third one was submitted by Jim Bloom.
2000-01-29 02:04:16 +00:00
add ELECOM Air@Hark/LD-WL11/PCC card add NEC Wireless Card CMZ-RT-WP card Obtained from: [bsd-nomads:13988] by YAMAMOTO Shigeru <shigeru@iij.ad.jp> sort Farallon Skyline 11Mbps Wireless entory
2000-08-28 14:15:24 +00:00
# NEC Wireless Card CMZ-RT-WP
card "NEC" "Wireless Card CMZ-RT-WP"
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add ELECOM Air@Hark/LD-WL11/PCC card add NEC Wireless Card CMZ-RT-WP card Obtained from: [bsd-nomads:13988] by YAMAMOTO Shigeru <shigeru@iij.ad.jp> sort Farallon Skyline 11Mbps Wireless entory
2000-08-28 14:15:24 +00:00
add PC-Card entry Corega KK Wireless LAN PCCA-11 NEC WL11C (PC-WL/11C) NEC Corporation PK-WL001 Submitted by: [bsd-nomads:15128] [bsd-nomads:15159] [bsd-nomads:15176] [bsd-nomads:15283] YAMAMOTO Shigeru <shigeru@iij.ad.jp> NAKAGAWA Yoshihisa <y-nakaga@nwsl.mesh.ad.jp>
2001-03-07 13:30:44 +00:00
# NEC WL11C (PC-WL/11C)
card "NEC Aterm" "WL11C (PC-WL/11C)"
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
config auto "wi" ?
add PC-Card entry Corega KK Wireless LAN PCCA-11 NEC WL11C (PC-WL/11C) NEC Corporation PK-WL001 Submitted by: [bsd-nomads:15128] [bsd-nomads:15159] [bsd-nomads:15176] [bsd-nomads:15283] YAMAMOTO Shigeru <shigeru@iij.ad.jp> NAKAGAWA Yoshihisa <y-nakaga@nwsl.mesh.ad.jp>
2001-03-07 13:30:44 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
# NEC Corporation PK-WL001
card "NEC Corporation" "Wireless PC Card"
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
config auto "wi" ?
add PC-Card entry Corega KK Wireless LAN PCCA-11 NEC WL11C (PC-WL/11C) NEC Corporation PK-WL001 Submitted by: [bsd-nomads:15128] [bsd-nomads:15159] [bsd-nomads:15176] [bsd-nomads:15283] YAMAMOTO Shigeru <shigeru@iij.ad.jp> NAKAGAWA Yoshihisa <y-nakaga@nwsl.mesh.ad.jp>
2001-03-07 13:30:44 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
The Netgear card works for me under 'wi'.
2001-07-07 20:38:44 +00:00
# Netgear MA401
card "NETGEAR MA401 Wireless PC" "Card"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
The Netgear card works for me under 'wi'.
2001-07-07 20:38:44 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Newer Netgear MA401RA entry. Submitted by: Michael Ranner
2002-09-28 17:36:52 +00:00
# Netgear MA401RA
card "NETGEAR MA401RA Wireless PC" "Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add entries for NETGEAR MA401RA, IO DATA PCET10CL and Panasonic KXL-CB10AN. Appologies to: those that submitted these to me.
2003-08-07 04:38:01 +00:00
# Netgear MA701
card "NETGEAR" "MA701 Wireless CF Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Two fixes: 1) Add new card entry for nortel eMobility wi card (from email that I've lost the sender on :-( 2) put ata devices at config 0x1 rather than auto. This should be better for nearly all cases. MFC after: 3 days
2002-09-27 06:14:29 +00:00
# Nortel eMobility
card "Nortel Networks" "emobility 802.11 Wireless LAN PC Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add NTT-ME SS-LAN CARD MN128. This card entry has been committed into NEWCARD.
2003-04-10 17:16:01 +00:00
# NTT-ME SS-LAN CARD MN128
card "NTT-ME" "11Mbps Wireless LAN PC Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Generic Prism2.5 card Submitted by: Matt Peterson
2002-09-30 00:59:05 +00:00
# Generic PRISM2.5 card
card "PCMCIA" "11M WLAN Card v2.5"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
# PLANEX GeoWave/GW-NS110
card "PLANEX" "GeoWave/GW-NS110"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x1 "wi" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
Add new entry PLANEX GW-NS11H(PRISM3.0). Submitted by [bsd-nomads:16322] Yasufumi Susuki <yasu@triaez.kaisei.org>
2002-05-29 21:16:51 +00:00
# PLANEX GW-NS11H
card "PLANEX" "GW-NS11H Wireless LAN PC Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Proxim Harmony card (from Bob) Also fix a minor disordering of a wi card while I'm here. Submitted by: bob bobing <this_is_my_act@yahoo.com>
2001-12-28 03:34:05 +00:00
# Proxim Harmony
card "PROXIM" "Harmony 802.11b/LAN PC CARD"
config 0x1 "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
A new proxim harmony oem card spotted in the field. Submitted by: Jeremy Bingham
2003-09-20 05:21:58 +00:00
# Proxim Harmony OEM card
card "PROXIM" "LAN PC CARD HARMONY 80211B"
config 0x1 "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Proxim RangeLAN-DS. Submitted by: Matt Peterson <matt@peterson.org> PR: 35057 Also update my note for the 3crwe737A after talking to Alan Clegg at BSDcon.
2002-02-17 20:05:39 +00:00
# Proxim RangeLAN-DS (OEM of Zcommax - Prism2 card)
card "PROXIM" "RangeLAN-DS/LAN PC CARD"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Add Proxim RangeLAN-DS. Submitted by: Matt Peterson <matt@peterson.org> PR: 35057 Also update my note for the 3crwe737A after talking to Alan Clegg at BSDcon.
2002-02-17 20:05:39 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
SAMSUNG SWL-2000P PCI Card Submitted by: Robert Dezorzo
2002-09-30 01:19:52 +00:00
# SAMSUNG SWL-2000P PCI Card
card "SAMSUNG" "11Mbps WLAN PCI Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
o Add T-POWER flash Submitted by: Michael Johansson <micke@nevermind.net> o Sony PCWA-C100 WaveLAN card Submitted by: "Jeremiah Gowdy" <jgowdy@home.com> o Corega KK Wireless LAN PCCA-11 (version b?) Submitted by: Masahide *MAC* Noda <mac@clave.gr.jp>
2002-01-10 18:53:00 +00:00
# SMC's SMC2632W (also matches the 3.3V SMC2602W)
Add entry for SMC 2632W card. Submitted by: lots of people, most recently by Mike Buchanon Also, Tried to clean up the comments about IRQs to match the new world order.
2001-07-22 18:13:19 +00:00
card "SMC" "SMC2632W"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Add entry for SMC 2632W card. Submitted by: lots of people, most recently by Mike Buchanon Also, Tried to clean up the comments about IRQs to match the new world order.
2001-07-22 18:13:19 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
o Add T-POWER flash Submitted by: Michael Johansson <micke@nevermind.net> o Sony PCWA-C100 WaveLAN card Submitted by: "Jeremiah Gowdy" <jgowdy@home.com> o Corega KK Wireless LAN PCCA-11 (version b?) Submitted by: Masahide *MAC* Noda <mac@clave.gr.jp>
2002-01-10 18:53:00 +00:00
# Sony PCWA-C100 WaveLAN
card "Sony Corporation" "PCWA-C100"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
o Belkin wireless card PR: 38919 Submitted by: Tommy Johnson o IBM IDE CDROM PR: 39537 Submitted by: Kevin Van Maren o T-Sunus 130 card PR: 41802 Submitted by: Oliver Schneider
2002-09-29 23:13:08 +00:00
# German Telekom T-Sinus 130card, unknown original manufactor
card "T-Sinus" "130card"
oops, last second botch: fix extra 'i'
2002-09-29 23:16:08 +00:00
config auto "wi" ?
insert /etc/pccard_ether $device start
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
remove /etc/pccard_ether $device stop
o Belkin wireless card PR: 38919 Submitted by: Tommy Johnson o IBM IDE CDROM PR: 39537 Submitted by: Kevin Van Maren o T-Sunus 130 card PR: 41802 Submitted by: Oliver Schneider
2002-09-29 23:13:08 +00:00
Add a bunch of wireless cards from Japan. Shigeru YAMAMOTO-san brought them to BSDcon and gratiously allowed me to test each one with the wireless setup here. In addition, support another CF card which YAMAMOTO-san also brought. Also add a Lexar CF card which didn't work with auto on many laptops.
2000-10-17 22:31:27 +00:00
# TDK LAK-CD011WL
card "TDK" "LAK-CD011WL for Wireless LAN"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "wi" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add entry for the Farallon Skyline 11Mbps wireless NIC (WaveLAN/IEEE compatible)
2000-08-23 20:10:44 +00:00
Add Linksys Instant Wireless WPC11 v2.5 Submitted by: eliedtke@apogeetelecom.com
2002-01-29 05:15:56 +00:00
# Linksys Instant Wireless WPC11 v2.5
card "The Linksys Group, Inc." "Instant Wireless Network PC Card"
Add a generic NANOSPEED wi card. Submitted by: matt peterson While I'm here, kill the flags 0x10000 on all the prism based cards. Both stable and current figure this out on their own and we've had at least one releases where this is the case.
2002-07-26 06:12:14 +00:00
config auto "wi" ?
Add Linksys Instant Wireless WPC11 v2.5 Submitted by: eliedtke@apogeetelecom.com
2002-01-29 05:15:56 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Toshiba wireless LAN card Submitted by: "Mark Sergeant" <msergeant@snsonline.net>
2001-11-21 06:24:44 +00:00
# Toshibas wireless lan card
card "TOSHIBA" "Wireless LAN Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Planex geowave (hosokawa in nomads) Added two ata devices (Kazuya Kodama <kodama@rd.nacsis.ac.jp> in nomads) Added CyQ've ELA-110E (mihira-san <sanpei@sanpei.org>) The CyQ card doesn't have a PR number (yet).
2000-05-29 08:21:19 +00:00
US Robotics Wireless Card 2410 Submitted by: Jerry A! <jerry@thehutt.org> PR: 33858
2002-03-05 05:44:28 +00:00
# U.S. Robotics Wireless Card 2410
Correct US Robotics Wireless Card 2410 entry
2002-05-24 15:28:38 +00:00
card "U.S. Robotics" "IEEE 802.11b PC-CARD"
US Robotics Wireless Card 2410 Submitted by: Jerry A! <jerry@thehutt.org> PR: 33858
2002-03-05 05:44:28 +00:00
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
o Belkin wireless card PR: 38919 Submitted by: Tommy Johnson o IBM IDE CDROM PR: 39537 Submitted by: Kevin Van Maren o T-Sunus 130 card PR: 41802 Submitted by: Oliver Schneider
2002-09-29 23:13:08 +00:00
# Taiwanese Blue Concentric Circle CF Wireless LAN Model WL-379F
# This is a card sold in Taiwan.
card "Wireless LAN" "11Mbps PC Card"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add YIS YWL-11B.
2003-02-15 14:04:05 +00:00
# YIS YWL-11B
card "YIS Corp." "YWL-11b"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
o FreeSPirit ISDN/56K modem card o No-name OEM Prism card o ActionTec Prism card o ZoomAir 11Mbps High Rate wireless networking PR: 41929, 41928 Submitted by: Bruce M Simpson o Dynalink L100C16 PR: 41938 Submitted by: Marco van de Voort
2002-09-29 22:51:31 +00:00
# ZoomAir 802.11
card "ZoomAir 11Mbps High" "Rate wireless Networking"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
########## xe ##########
Use tabs where tabs are supposed to go!
2001-06-26 20:50:34 +00:00
# Accton EN2226/Fast EtherCard (16-bit verison)
Add Accton EN2226/Faster EtherCard-16. Submitted by: Mihira-san Yoshiro <sanpei@sanpei.org> PR: 18545
2000-05-16 05:51:38 +00:00
card "Accton" "Fast EtherCard-16"
use ``config auto'' - Melco LPC-T (PIO mode) - AR-P500 ethernet card - Accton EN2226/Fast EtherCard (16-bit verison)
2000-10-02 14:41:09 +00:00
config auto "xe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Accton EN2226/Faster EtherCard-16. Submitted by: Mihira-san Yoshiro <sanpei@sanpei.org> PR: 18545
2000-05-16 05:51:38 +00:00
add Compaq Netelligent 10/100 PC Card PR: 19007
2000-07-10 08:05:47 +00:00
# Compaq Netelligent 10/100 PC Card
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
card "Compaq" "Netelligent 10/100 PC Card"
config auto "xe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
add Compaq Netelligent 10/100 PC Card PR: 19007
2000-07-10 08:05:47 +00:00
Add Ethernet part of Intel EtherExpress PRO/100 LAN/Modem card. This is a rebadged Xircom REM56 RealPort card. Short MFC timeout to beat the 4.11 code freeze. PR: 53027 Submitted by: John Merryweather Cooper <coop9211 at uidaho dot edu> Approved by: imp (mentor) MFC after: 2 days
2004-12-09 22:27:11 +00:00
# Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (Ethernet part)
card "Intel" "EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter"
config 0x27 "xe" ?
# config auto "sio" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
# Intel EtherExpress PRO/100 Mobile Adapter (16-bit version)
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "Intel" "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "xe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Added Melco Airconnect wireless Ethernet. Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> OK'ed by: jkh@FreeBSD.org
2000-02-12 01:49:29 +00:00
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
# XXX NOT SURE SUPPORTED
# Toshiba 10/100 Ethernet PC Card IPC5008A
#card "Toshiba" "10/100 Ethernet PC Card"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
# config auto "xe" ?
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
## cardio 0x300 0x10
# iosize 16
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
# insert /etc/pccard_ether $device start
# remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add Xircom XEM5600 card (appears to be a renamed REM56). Observe that Xircom CEM28 and CEM33 are known to work in Ethernet mode. Reviewed by: imp (mentor)
2004-04-09 17:15:18 +00:00
# Xircom Realport 10/100 Ethernet + modem (Ethernet part) (XEM5600)
card "Xircom" "10/100 Network + 56K Modem PC Card"
config 0x27 "xe" ?
# config auto "sio" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Stick the Xircom 10/100 Network PC Card adapter entry in the right sort order. Requested by: sanpei
2000-11-03 01:54:11 +00:00
# Xircom 10/100 Network PC Card
card "Xircom" "10/100 Network PC Card"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "xe" ?
Stick the Xircom 10/100 Network PC Card adapter entry in the right sort order. Requested by: sanpei
2000-11-03 01:54:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add Xircom XEM5600 card (appears to be a renamed REM56). Observe that Xircom CEM28 and CEM33 are known to work in Ethernet mode. Reviewed by: imp (mentor)
2004-04-09 17:15:18 +00:00
# Xircom Realport 10/100 Ethernet + modem (Ethernet part) (REM56)
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "Xircom" "16-bit Ethernet + Modem 56"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config 0x27 "xe" ?
# config auto "sio" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Add IO DATA card built around the linksys parts. Submitted by: takawata@shidahara1.planet.sci.kobe-u.ac.jp PR: 16922
2000-03-13 09:45:12 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Xircom CreditCard Ethernet CE3-10/100
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "Xircom" "CreditCard 10/100"
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
config auto "xe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Correct socket ethernet card entry. Remove ^M that snuck into the last commit by mistake.
2000-03-11 20:23:34 +00:00
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Xircom CreditCard Ethernet Adaptor IIps (PS-CE2-10)
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
card "Xircom" "CreditCard 10Base-T"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config auto "xe" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[Merge from PAO] add about 67 entry and rewrite 18 entry change Xircom CompactCard Ethernet 10 entry config 0x20 -> auto Reviewed by: iwasaki Obtained from: PAO3
2000-07-16 14:33:47 +00:00
Add Xircom XEM5600 card (appears to be a renamed REM56). Observe that Xircom CEM28 and CEM33 are known to work in Ethernet mode. Reviewed by: imp (mentor)
2004-04-09 17:15:18 +00:00
# Xircom CreditCard Ethernet + modem (Ethernet part) (CEM28)
card "Xircom" "CreditCard Ethernet+Modem 28.8"
config auto "xe" ?
# config auto "sio" ?
# ether 0x98
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
# Xircom CreditCard Ethernet + modem (Ethernet part) (CEM33)
card "Xircom" "CreditCard Ethernet+Modem 33.6"
config auto "xe" ?
# config auto "sio" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# Xircom CreditCard Ethernet 10/100 + modem (Ethernet part) (CEM56)
Entries are now SORTED in this file. They are sorted first by the driver that they use, followed by the MFG CIS string, followed by the model CIS. Future entries *WILL* follow this convention, or I'll be grumpy. Please let me know if this messes anybody up. There were one or two pentries that were duplicated. Some were removed since they were identical, others were left in place. Approved, in principle, by the nomads mailing list.
2000-03-16 07:56:40 +00:00
card "Xircom" "CreditCard Ethernet 10/100 + Modem 56"
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
config 0x27 "xe" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# config auto "sio" ?
Add an optional start/stop argument to pccard_ether, and migrate the 'ifconfig ifN delete' into pccard_ether under the 'stop' function. In addition start dhclient with a pid file based on the interface name, e.g. /var/run/dhclient.ep0.pid, and kill the correct dhclient (or dhcpc) process when the card is removed.
2000-10-16 19:11:11 +00:00
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
MFPAO: support wildcard entry for generic serial and fixed disk as fallthrough entry. Submitted by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>, iwasaki Reviewed by: imp, -mobile ML and nomads ML in Japan Obtained from: http://www.freebsd.org/~iwasaki/pccard/pccardd-generic.diff http://home.jp.freebsd.org/~sanpei/4-current/usr.sbin-pccard-pccardd.diff
2000-04-05 18:39:21 +00:00
Xircom RealPort RE-10 Submitted by: Willem van Engen <wvengen@stack.nl>
2001-12-28 03:39:13 +00:00
# Xircom RE-10
card "Xircom" "Ethernet Adapter"
config auto "xe" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
MFPAO: support wildcard entry for generic serial and fixed disk as fallthrough entry. Submitted by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>, iwasaki Reviewed by: imp, -mobile ML and nomads ML in Japan Obtained from: http://www.freebsd.org/~iwasaki/pccard/pccardd-generic.diff http://home.jp.freebsd.org/~sanpei/4-current/usr.sbin-pccard-pccardd.diff
2000-04-05 18:39:21 +00:00
# -------------------------------------------------------------------
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
#
MFPAO: support wildcard entry for generic serial and fixed disk as fallthrough entry. Submitted by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>, iwasaki Reviewed by: imp, -mobile ML and nomads ML in Japan Obtained from: http://www.freebsd.org/~iwasaki/pccard/pccardd-generic.diff http://home.jp.freebsd.org/~sanpei/4-current/usr.sbin-pccard-pccardd.diff
2000-04-05 18:39:21 +00:00
# "Wildcard" entries
Removed whitespace at BOF, EOL & EOF.
2004-06-06 11:46:29 +00:00
#
MFPAO: support wildcard entry for generic serial and fixed disk as fallthrough entry. Submitted by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>, iwasaki Reviewed by: imp, -mobile ML and nomads ML in Japan Obtained from: http://www.freebsd.org/~iwasaki/pccard/pccardd-generic.diff http://home.jp.freebsd.org/~sanpei/4-current/usr.sbin-pccard-pccardd.diff
2000-04-05 18:39:21 +00:00
# -------------------------------------------------------------------
# GENERIC PCMCIA modem
generic serial
config auto "sio" ?
o Almost all the config line changed to `auto', except for multifunction cards and I recieved reports that the card does not workd by `config auto'. (MFPAO) o Remove static assign of the IRQ number. o Remove two duplicated entries. o Join some entries using regex and fixed matching order problem. These changes for boot.flp. Suggested by: sanpei
2000-12-24 15:38:38 +00:00
# reset 100 # default
# reset 1000 # safety reset time
MFPAO: support wildcard entry for generic serial and fixed disk as fallthrough entry. Submitted by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>, iwasaki Reviewed by: imp, -mobile ML and nomads ML in Japan Obtained from: http://www.freebsd.org/~iwasaki/pccard/pccardd-generic.diff http://home.jp.freebsd.org/~sanpei/4-current/usr.sbin-pccard-pccardd.diff
2000-04-05 18:39:21 +00:00
reset 10000 # for unstable cards
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
logstr "GENERIC PCMCIA modem"
MFPAO: support wildcard entry for generic serial and fixed disk as fallthrough entry. Submitted by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>, iwasaki Reviewed by: imp, -mobile ML and nomads ML in Japan Obtained from: http://www.freebsd.org/~iwasaki/pccard/pccardd-generic.diff http://home.jp.freebsd.org/~sanpei/4-current/usr.sbin-pccard-pccardd.diff
2000-04-05 18:39:21 +00:00
# GENERIC Flash ATA / ATA HDD
generic fixed_disk
Two fixes: 1) Add new card entry for nortel eMobility wi card (from email that I've lost the sender on :-( 2) put ata devices at config 0x1 rather than auto. This should be better for nearly all cases. MFC after: 3 days
2002-09-27 06:14:29 +00:00
config 0x1 "ata" ?
PCCard entry cleanup: - Remove unit numbers in config lines. - Remove all of logger lines and add logstr lines for some cards. This changes reduced file size from 84k to 45k. - Use '/sbin/ifconfig $device delete' instead of /etc/pccard_ether_remove which haven't merge from PAO yet. - Cosmetic changes.
2000-07-16 17:33:54 +00:00
logstr "GENERIC Flash ATA / ATA HDD"
Reference in New Issue Copy Permalink