freebsd-skq/lib/libpthread/thread/thr_sigmask.c

114 lines
3.3 KiB
C
Raw Normal View History

/*
* Copyright (c) 1997 John Birrell <jb@cimlogic.com.au>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY JOHN BIRRELL AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1999-08-28 00:22:10 +00:00
* $FreeBSD$
*/
sigset_t change (part 5 of 5) ----------------------------- Most of the userland changes are in libc. For both the alpha and the i386 setjmp has been changed to accomodate for the new sigset_t. Internally, libc is mostly rewritten to use the new syscalls. The exception is in compat-43/sigcompat.c The POSIX thread library has also been rewritten to use the new sigset_t. Except, that it currently only handles NSIG signals instead of the maximum _SIG_MAXSIG. This should not be a problem because current applications don't use any signals higher than NSIG. There are version bumps for the following libraries: libdialog libreadline libc libc_r libedit libftpio libss These libraries either a) have one of the modified structures visible in the interface, or b) use sigset_t internally and may cause breakage if new binaries are used against libraries that don't have the sigset_t change. This not an immediate issue, but will be as soon as applications start using the new range to its fullest. NOTE: libncurses already had an version bump and has not been given one now. NOTE: doscmd is a real casualty and has been disconnected for the moment. Reconnection will eventually happen after doscmd has been fixed. I'm aware that being the last one to touch it, I'm automaticly promoted to being maintainer. According to good taste this means that I will receive a badge which either will be glued or mechanically stapled, drilled or otherwise violently forced onto me :-) NOTE: pcvt/vttest cannot be compiled with -traditional. The change cause sys/types to be included along the way which contains the const and volatile modifiers. I don't consider this a solution, but more a workaround.
1999-09-29 15:18:46 +00:00
#include <sys/param.h>
#include <sys/types.h>
#include <sys/signalvar.h>
#include <errno.h>
#include <signal.h>
#include <string.h>
#include <pthread.h>
#include "thr_private.h"
LT10_COMPAT_PRIVATE(_pthread_sigmask);
LT10_COMPAT_DEFAULT(pthread_sigmask);
__weak_reference(_pthread_sigmask, pthread_sigmask);
int
_pthread_sigmask(int how, const sigset_t *set, sigset_t *oset)
{
struct pthread *curthread = _get_curthread();
sigset_t oldset, newset;
int ret;
if (curthread->attr.flags & PTHREAD_SCOPE_SYSTEM) {
ret = __sys_sigprocmask(how, set, oset);
if (ret != 0)
ret = errno;
/* Get a fresh copy */
__sys_sigprocmask(SIG_SETMASK, NULL, &curthread->sigmask);
return (ret);
}
if (set)
newset = *set;
o Use a daemon thread to monitor signal events in kernel, if pending signals were changed in kernel, it will retrieve the pending set and try to find a thread to dispatch the signal. The dispatching process can be rolled back if the signal is no longer in kernel. o Create two functions _thr_signal_init() and _thr_signal_deinit(), all signal action settings are retrieved from kernel when threading mode is turned on, after a fork(), child process will reset them to user settings by calling _thr_signal_deinit(). when threading mode is not turned on, all signal operations are direct past to kernel. o When a thread generated a synchoronous signals and its context returned from completed list, UTS will retrieve the signal from its mailbox and try to deliver the signal to thread. o Context signal mask is now only used when delivering signals, thread's current signal mask is always the one in pthread structure. o Remove have_signals field in pthread structure, replace it with psf_valid in pthread_signal_frame. when psf_valid is true, in context switch time, thread will backout itself from some mutex/condition internal queues, then begin to process signals. when a thread is not at blocked state and running, check_pending indicates there are signals for the thread, after preempted and then resumed time, UTS will try to deliver signals to the thread. o At signal delivering time, not only pending signals in thread will be scanned, process's pending signals will be scanned too. o Change sigwait code a bit, remove field sigwait in pthread_wait_data, replace it with oldsigmask in pthread structure, when a thread calls sigwait(), its current signal mask is backuped to oldsigmask, and waitset is copied to its signal mask and when the thread gets a signal in the waitset range, its current signal mask is restored from oldsigmask, these are done in atomic fashion. o Two additional POSIX APIs are implemented, sigwaitinfo() and sigtimedwait(). o Signal code locking is better than previous, there is fewer race conditions. o Temporary disable most of code in _kse_single_thread as it is not safe after fork().
2003-06-28 09:55:02 +00:00
THR_SCHED_LOCK(curthread, curthread);
ret = 0;
if (oset != NULL)
/* Return the current mask: */
oldset = curthread->sigmask;
/* Check if a new signal set was provided by the caller: */
if (set != NULL) {
/* Process according to what to do: */
switch (how) {
/* Block signals: */
case SIG_BLOCK:
/* Add signals to the existing mask: */
SIGSETOR(curthread->sigmask, newset);
break;
/* Unblock signals: */
case SIG_UNBLOCK:
/* Clear signals from the existing mask: */
SIGSETNAND(curthread->sigmask, newset);
break;
/* Set the signal process mask: */
case SIG_SETMASK:
/* Set the new mask: */
curthread->sigmask = newset;
break;
/* Trap invalid actions: */
default:
/* Return an invalid argument: */
ret = EINVAL;
break;
}
o Use a daemon thread to monitor signal events in kernel, if pending signals were changed in kernel, it will retrieve the pending set and try to find a thread to dispatch the signal. The dispatching process can be rolled back if the signal is no longer in kernel. o Create two functions _thr_signal_init() and _thr_signal_deinit(), all signal action settings are retrieved from kernel when threading mode is turned on, after a fork(), child process will reset them to user settings by calling _thr_signal_deinit(). when threading mode is not turned on, all signal operations are direct past to kernel. o When a thread generated a synchoronous signals and its context returned from completed list, UTS will retrieve the signal from its mailbox and try to deliver the signal to thread. o Context signal mask is now only used when delivering signals, thread's current signal mask is always the one in pthread structure. o Remove have_signals field in pthread structure, replace it with psf_valid in pthread_signal_frame. when psf_valid is true, in context switch time, thread will backout itself from some mutex/condition internal queues, then begin to process signals. when a thread is not at blocked state and running, check_pending indicates there are signals for the thread, after preempted and then resumed time, UTS will try to deliver signals to the thread. o At signal delivering time, not only pending signals in thread will be scanned, process's pending signals will be scanned too. o Change sigwait code a bit, remove field sigwait in pthread_wait_data, replace it with oldsigmask in pthread structure, when a thread calls sigwait(), its current signal mask is backuped to oldsigmask, and waitset is copied to its signal mask and when the thread gets a signal in the waitset range, its current signal mask is restored from oldsigmask, these are done in atomic fashion. o Two additional POSIX APIs are implemented, sigwaitinfo() and sigtimedwait(). o Signal code locking is better than previous, there is fewer race conditions. o Temporary disable most of code in _kse_single_thread as it is not safe after fork().
2003-06-28 09:55:02 +00:00
SIG_CANTMASK(curthread->sigmask);
THR_SCHED_UNLOCK(curthread, curthread);
/*
* Run down any pending signals:
*/
if (ret == 0)
_thr_sig_check_pending(curthread);
o Use a daemon thread to monitor signal events in kernel, if pending signals were changed in kernel, it will retrieve the pending set and try to find a thread to dispatch the signal. The dispatching process can be rolled back if the signal is no longer in kernel. o Create two functions _thr_signal_init() and _thr_signal_deinit(), all signal action settings are retrieved from kernel when threading mode is turned on, after a fork(), child process will reset them to user settings by calling _thr_signal_deinit(). when threading mode is not turned on, all signal operations are direct past to kernel. o When a thread generated a synchoronous signals and its context returned from completed list, UTS will retrieve the signal from its mailbox and try to deliver the signal to thread. o Context signal mask is now only used when delivering signals, thread's current signal mask is always the one in pthread structure. o Remove have_signals field in pthread structure, replace it with psf_valid in pthread_signal_frame. when psf_valid is true, in context switch time, thread will backout itself from some mutex/condition internal queues, then begin to process signals. when a thread is not at blocked state and running, check_pending indicates there are signals for the thread, after preempted and then resumed time, UTS will try to deliver signals to the thread. o At signal delivering time, not only pending signals in thread will be scanned, process's pending signals will be scanned too. o Change sigwait code a bit, remove field sigwait in pthread_wait_data, replace it with oldsigmask in pthread structure, when a thread calls sigwait(), its current signal mask is backuped to oldsigmask, and waitset is copied to its signal mask and when the thread gets a signal in the waitset range, its current signal mask is restored from oldsigmask, these are done in atomic fashion. o Two additional POSIX APIs are implemented, sigwaitinfo() and sigtimedwait(). o Signal code locking is better than previous, there is fewer race conditions. o Temporary disable most of code in _kse_single_thread as it is not safe after fork().
2003-06-28 09:55:02 +00:00
} else
THR_SCHED_UNLOCK(curthread, curthread);
if (ret == 0 && oset != NULL)
*oset = oldset;
return (ret);
}