freebsd-skq/contrib/tcpdump/print-rsvp.c

1991 lines
78 KiB
C
Raw Normal View History

/*
2007-10-16 02:20:42 +00:00
* Copyright (c) 1998-2007 The TCPDUMP project
2006-09-04 20:04:42 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that: (1) source code
* distributions retain the above copyright notice and this paragraph
* in its entirety, and (2) distributions including binary code include
* the above copyright notice and this paragraph in its entirety in
* the documentation or other materials provided with the distribution.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND
* WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
* LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Original code by Hannes Gredler (hannes@gredler.at)
*/
2017-01-31 19:17:06 +00:00
/* \summary: Resource ReSerVation Protocol (RSVP) printer */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
2017-01-31 19:17:06 +00:00
#include <netdissect-stdinc.h>
2017-01-31 19:17:06 +00:00
#include "netdissect.h"
#include "extract.h"
#include "addrtoname.h"
#include "ethertype.h"
#include "gmpls.h"
2007-10-16 02:20:42 +00:00
#include "af.h"
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#include "signature.h"
2017-01-31 19:17:06 +00:00
static const char tstr[] = " [|rsvp]";
/*
* RFC 2205 common header
*
* 0 1 2 3
* +-------------+-------------+-------------+-------------+
* | Vers | Flags| Msg Type | RSVP Checksum |
* +-------------+-------------+-------------+-------------+
* | Send_TTL | (Reserved) | RSVP Length |
* +-------------+-------------+-------------+-------------+
*
*/
struct rsvp_common_header {
2015-01-06 19:03:11 +00:00
uint8_t version_flags;
uint8_t msg_type;
uint8_t checksum[2];
uint8_t ttl;
uint8_t reserved;
uint8_t length[2];
};
2015-01-06 19:03:11 +00:00
/*
* RFC2205 object header
*
2015-01-06 19:03:11 +00:00
*
* 0 1 2 3
* +-------------+-------------+-------------+-------------+
* | Length (bytes) | Class-Num | C-Type |
* +-------------+-------------+-------------+-------------+
* | |
* // (Object contents) //
* | |
* +-------------+-------------+-------------+-------------+
*/
struct rsvp_object_header {
2015-01-06 19:03:11 +00:00
uint8_t length[2];
uint8_t class_num;
uint8_t ctype;
};
#define RSVP_VERSION 1
2015-01-06 19:03:11 +00:00
#define RSVP_EXTRACT_VERSION(x) (((x)&0xf0)>>4)
#define RSVP_EXTRACT_FLAGS(x) ((x)&0x0f)
#define RSVP_MSGTYPE_PATH 1
#define RSVP_MSGTYPE_RESV 2
#define RSVP_MSGTYPE_PATHERR 3
#define RSVP_MSGTYPE_RESVERR 4
#define RSVP_MSGTYPE_PATHTEAR 5
#define RSVP_MSGTYPE_RESVTEAR 6
#define RSVP_MSGTYPE_RESVCONF 7
2017-01-31 19:17:06 +00:00
#define RSVP_MSGTYPE_BUNDLE 12
#define RSVP_MSGTYPE_ACK 13
#define RSVP_MSGTYPE_HELLO_OLD 14 /* ancient Hellos */
#define RSVP_MSGTYPE_SREFRESH 15
#define RSVP_MSGTYPE_HELLO 20
static const struct tok rsvp_msg_type_values[] = {
{ RSVP_MSGTYPE_PATH, "Path" },
{ RSVP_MSGTYPE_RESV, "Resv" },
{ RSVP_MSGTYPE_PATHERR, "PathErr" },
{ RSVP_MSGTYPE_RESVERR, "ResvErr" },
{ RSVP_MSGTYPE_PATHTEAR, "PathTear" },
{ RSVP_MSGTYPE_RESVTEAR, "ResvTear" },
{ RSVP_MSGTYPE_RESVCONF, "ResvConf" },
2017-01-31 19:17:06 +00:00
{ RSVP_MSGTYPE_BUNDLE, "Bundle" },
{ RSVP_MSGTYPE_ACK, "Acknowledgement" },
{ RSVP_MSGTYPE_HELLO_OLD, "Hello (Old)" },
{ RSVP_MSGTYPE_SREFRESH, "Refresh" },
{ RSVP_MSGTYPE_HELLO, "Hello" },
{ 0, NULL}
};
static const struct tok rsvp_header_flag_values[] = {
{ 0x01, "Refresh reduction capable" }, /* rfc2961 */
{ 0, NULL}
};
#define RSVP_OBJ_SESSION 1 /* rfc2205 */
#define RSVP_OBJ_RSVP_HOP 3 /* rfc2205, rfc3473 */
2006-09-04 20:04:42 +00:00
#define RSVP_OBJ_INTEGRITY 4 /* rfc2747 */
#define RSVP_OBJ_TIME_VALUES 5 /* rfc2205 */
2015-01-06 19:03:11 +00:00
#define RSVP_OBJ_ERROR_SPEC 6
#define RSVP_OBJ_SCOPE 7
#define RSVP_OBJ_STYLE 8 /* rfc2205 */
#define RSVP_OBJ_FLOWSPEC 9 /* rfc2215 */
#define RSVP_OBJ_FILTERSPEC 10 /* rfc2215 */
#define RSVP_OBJ_SENDER_TEMPLATE 11
#define RSVP_OBJ_SENDER_TSPEC 12 /* rfc2215 */
#define RSVP_OBJ_ADSPEC 13 /* rfc2215 */
#define RSVP_OBJ_POLICY_DATA 14
#define RSVP_OBJ_CONFIRM 15 /* rfc2205 */
#define RSVP_OBJ_LABEL 16 /* rfc3209 */
#define RSVP_OBJ_LABEL_REQ 19 /* rfc3209 */
#define RSVP_OBJ_ERO 20 /* rfc3209 */
#define RSVP_OBJ_RRO 21 /* rfc3209 */
#define RSVP_OBJ_HELLO 22 /* rfc3209 */
2007-10-16 02:20:42 +00:00
#define RSVP_OBJ_MESSAGE_ID 23 /* rfc2961 */
#define RSVP_OBJ_MESSAGE_ID_ACK 24 /* rfc2961 */
#define RSVP_OBJ_MESSAGE_ID_LIST 25 /* rfc2961 */
#define RSVP_OBJ_RECOVERY_LABEL 34 /* rfc3473 */
#define RSVP_OBJ_UPSTREAM_LABEL 35 /* rfc3473 */
#define RSVP_OBJ_LABEL_SET 36 /* rfc3473 */
#define RSVP_OBJ_PROTECTION 37 /* rfc3473 */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#define RSVP_OBJ_S2L 50 /* rfc4875 */
2006-09-04 20:04:42 +00:00
#define RSVP_OBJ_DETOUR 63 /* draft-ietf-mpls-rsvp-lsp-fastreroute-07 */
#define RSVP_OBJ_CLASSTYPE 66 /* rfc4124 */
#define RSVP_OBJ_CLASSTYPE_OLD 125 /* draft-ietf-tewg-diff-te-proto-07 */
#define RSVP_OBJ_SUGGESTED_LABEL 129 /* rfc3473 */
#define RSVP_OBJ_ACCEPT_LABEL_SET 130 /* rfc3473 */
#define RSVP_OBJ_RESTART_CAPABILITY 131 /* rfc3473 */
#define RSVP_OBJ_NOTIFY_REQ 195 /* rfc3473 */
#define RSVP_OBJ_ADMIN_STATUS 196 /* rfc3473 */
#define RSVP_OBJ_PROPERTIES 204 /* juniper proprietary */
2006-09-04 20:04:42 +00:00
#define RSVP_OBJ_FASTREROUTE 205 /* draft-ietf-mpls-rsvp-lsp-fastreroute-07 */
#define RSVP_OBJ_SESSION_ATTRIBUTE 207 /* rfc3209 */
2007-10-16 02:20:42 +00:00
#define RSVP_OBJ_GENERALIZED_UNI 229 /* OIF RSVP extensions UNI 1.0 Signaling, Rel. 2 */
#define RSVP_OBJ_CALL_ID 230 /* rfc3474 */
#define RSVP_OBJ_CALL_OPS 236 /* rfc3474 */
static const struct tok rsvp_obj_values[] = {
{ RSVP_OBJ_SESSION, "Session" },
{ RSVP_OBJ_RSVP_HOP, "RSVP Hop" },
{ RSVP_OBJ_INTEGRITY, "Integrity" },
{ RSVP_OBJ_TIME_VALUES, "Time Values" },
{ RSVP_OBJ_ERROR_SPEC, "Error Spec" },
{ RSVP_OBJ_SCOPE, "Scope" },
{ RSVP_OBJ_STYLE, "Style" },
{ RSVP_OBJ_FLOWSPEC, "Flowspec" },
{ RSVP_OBJ_FILTERSPEC, "FilterSpec" },
{ RSVP_OBJ_SENDER_TEMPLATE, "Sender Template" },
{ RSVP_OBJ_SENDER_TSPEC, "Sender TSpec" },
{ RSVP_OBJ_ADSPEC, "Adspec" },
{ RSVP_OBJ_POLICY_DATA, "Policy Data" },
{ RSVP_OBJ_CONFIRM, "Confirm" },
{ RSVP_OBJ_LABEL, "Label" },
{ RSVP_OBJ_LABEL_REQ, "Label Request" },
{ RSVP_OBJ_ERO, "ERO" },
{ RSVP_OBJ_RRO, "RRO" },
{ RSVP_OBJ_HELLO, "Hello" },
{ RSVP_OBJ_MESSAGE_ID, "Message ID" },
{ RSVP_OBJ_MESSAGE_ID_ACK, "Message ID Ack" },
{ RSVP_OBJ_MESSAGE_ID_LIST, "Message ID List" },
{ RSVP_OBJ_RECOVERY_LABEL, "Recovery Label" },
{ RSVP_OBJ_UPSTREAM_LABEL, "Upstream Label" },
{ RSVP_OBJ_LABEL_SET, "Label Set" },
{ RSVP_OBJ_ACCEPT_LABEL_SET, "Acceptable Label Set" },
{ RSVP_OBJ_DETOUR, "Detour" },
{ RSVP_OBJ_CLASSTYPE, "Class Type" },
2006-09-04 20:04:42 +00:00
{ RSVP_OBJ_CLASSTYPE_OLD, "Class Type (old)" },
{ RSVP_OBJ_SUGGESTED_LABEL, "Suggested Label" },
{ RSVP_OBJ_PROPERTIES, "Properties" },
{ RSVP_OBJ_FASTREROUTE, "Fast Re-Route" },
{ RSVP_OBJ_SESSION_ATTRIBUTE, "Session Attribute" },
2007-10-16 02:20:42 +00:00
{ RSVP_OBJ_GENERALIZED_UNI, "Generalized UNI" },
{ RSVP_OBJ_CALL_ID, "Call-ID" },
{ RSVP_OBJ_CALL_OPS, "Call Capability" },
{ RSVP_OBJ_RESTART_CAPABILITY, "Restart Capability" },
{ RSVP_OBJ_NOTIFY_REQ, "Notify Request" },
{ RSVP_OBJ_PROTECTION, "Protection" },
{ RSVP_OBJ_ADMIN_STATUS, "Administrative Status" },
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{ RSVP_OBJ_S2L, "Sub-LSP to LSP" },
{ 0, NULL}
};
#define RSVP_CTYPE_IPV4 1
#define RSVP_CTYPE_IPV6 2
#define RSVP_CTYPE_TUNNEL_IPV4 7
#define RSVP_CTYPE_TUNNEL_IPV6 8
2007-10-16 02:20:42 +00:00
#define RSVP_CTYPE_UNI_IPV4 11 /* OIF RSVP extensions UNI 1.0 Signaling Rel. 2 */
#define RSVP_CTYPE_1 1
#define RSVP_CTYPE_2 2
#define RSVP_CTYPE_3 3
#define RSVP_CTYPE_4 4
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#define RSVP_CTYPE_12 12
#define RSVP_CTYPE_13 13
#define RSVP_CTYPE_14 14
/*
* the ctypes are not globally unique so for
* translating it to strings we build a table based
* on objects offsetted by the ctype
*/
static const struct tok rsvp_ctype_values[] = {
{ 256*RSVP_OBJ_RSVP_HOP+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_RSVP_HOP+RSVP_CTYPE_IPV6, "IPv6" },
{ 256*RSVP_OBJ_RSVP_HOP+RSVP_CTYPE_3, "IPv4 plus opt. TLVs" },
{ 256*RSVP_OBJ_RSVP_HOP+RSVP_CTYPE_4, "IPv6 plus opt. TLVs" },
{ 256*RSVP_OBJ_NOTIFY_REQ+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_NOTIFY_REQ+RSVP_CTYPE_IPV6, "IPv6" },
{ 256*RSVP_OBJ_CONFIRM+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_CONFIRM+RSVP_CTYPE_IPV6, "IPv6" },
{ 256*RSVP_OBJ_TIME_VALUES+RSVP_CTYPE_1, "1" },
{ 256*RSVP_OBJ_FLOWSPEC+RSVP_CTYPE_1, "obsolete" },
{ 256*RSVP_OBJ_FLOWSPEC+RSVP_CTYPE_2, "IntServ" },
{ 256*RSVP_OBJ_SENDER_TSPEC+RSVP_CTYPE_2, "IntServ" },
{ 256*RSVP_OBJ_ADSPEC+RSVP_CTYPE_2, "IntServ" },
{ 256*RSVP_OBJ_FILTERSPEC+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_FILTERSPEC+RSVP_CTYPE_IPV6, "IPv6" },
{ 256*RSVP_OBJ_FILTERSPEC+RSVP_CTYPE_3, "IPv6 Flow-label" },
{ 256*RSVP_OBJ_FILTERSPEC+RSVP_CTYPE_TUNNEL_IPV4, "Tunnel IPv4" },
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{ 256*RSVP_OBJ_FILTERSPEC+RSVP_CTYPE_12, "IPv4 P2MP LSP Tunnel" },
{ 256*RSVP_OBJ_FILTERSPEC+RSVP_CTYPE_13, "IPv6 P2MP LSP Tunnel" },
{ 256*RSVP_OBJ_SESSION+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_SESSION+RSVP_CTYPE_IPV6, "IPv6" },
{ 256*RSVP_OBJ_SESSION+RSVP_CTYPE_TUNNEL_IPV4, "Tunnel IPv4" },
2007-10-16 02:20:42 +00:00
{ 256*RSVP_OBJ_SESSION+RSVP_CTYPE_UNI_IPV4, "UNI IPv4" },
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{ 256*RSVP_OBJ_SESSION+RSVP_CTYPE_13, "IPv4 P2MP LSP Tunnel" },
{ 256*RSVP_OBJ_SESSION+RSVP_CTYPE_14, "IPv6 P2MP LSP Tunnel" },
{ 256*RSVP_OBJ_SENDER_TEMPLATE+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_SENDER_TEMPLATE+RSVP_CTYPE_IPV6, "IPv6" },
{ 256*RSVP_OBJ_SENDER_TEMPLATE+RSVP_CTYPE_TUNNEL_IPV4, "Tunnel IPv4" },
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{ 256*RSVP_OBJ_SENDER_TEMPLATE+RSVP_CTYPE_12, "IPv4 P2MP LSP Tunnel" },
{ 256*RSVP_OBJ_SENDER_TEMPLATE+RSVP_CTYPE_13, "IPv6 P2MP LSP Tunnel" },
{ 256*RSVP_OBJ_MESSAGE_ID+RSVP_CTYPE_1, "1" },
2007-10-16 02:20:42 +00:00
{ 256*RSVP_OBJ_MESSAGE_ID_ACK+RSVP_CTYPE_1, "Message id ack" },
{ 256*RSVP_OBJ_MESSAGE_ID_ACK+RSVP_CTYPE_2, "Message id nack" },
{ 256*RSVP_OBJ_MESSAGE_ID_LIST+RSVP_CTYPE_1, "1" },
{ 256*RSVP_OBJ_STYLE+RSVP_CTYPE_1, "1" },
{ 256*RSVP_OBJ_HELLO+RSVP_CTYPE_1, "Hello Request" },
{ 256*RSVP_OBJ_HELLO+RSVP_CTYPE_2, "Hello Ack" },
{ 256*RSVP_OBJ_LABEL_REQ+RSVP_CTYPE_1, "without label range" },
{ 256*RSVP_OBJ_LABEL_REQ+RSVP_CTYPE_2, "with ATM label range" },
{ 256*RSVP_OBJ_LABEL_REQ+RSVP_CTYPE_3, "with FR label range" },
{ 256*RSVP_OBJ_LABEL_REQ+RSVP_CTYPE_4, "Generalized Label" },
{ 256*RSVP_OBJ_LABEL+RSVP_CTYPE_1, "Label" },
{ 256*RSVP_OBJ_LABEL+RSVP_CTYPE_2, "Generalized Label" },
{ 256*RSVP_OBJ_LABEL+RSVP_CTYPE_3, "Waveband Switching" },
{ 256*RSVP_OBJ_SUGGESTED_LABEL+RSVP_CTYPE_1, "Label" },
{ 256*RSVP_OBJ_SUGGESTED_LABEL+RSVP_CTYPE_2, "Generalized Label" },
{ 256*RSVP_OBJ_SUGGESTED_LABEL+RSVP_CTYPE_3, "Waveband Switching" },
{ 256*RSVP_OBJ_UPSTREAM_LABEL+RSVP_CTYPE_1, "Label" },
{ 256*RSVP_OBJ_UPSTREAM_LABEL+RSVP_CTYPE_2, "Generalized Label" },
{ 256*RSVP_OBJ_UPSTREAM_LABEL+RSVP_CTYPE_3, "Waveband Switching" },
{ 256*RSVP_OBJ_RECOVERY_LABEL+RSVP_CTYPE_1, "Label" },
{ 256*RSVP_OBJ_RECOVERY_LABEL+RSVP_CTYPE_2, "Generalized Label" },
{ 256*RSVP_OBJ_RECOVERY_LABEL+RSVP_CTYPE_3, "Waveband Switching" },
{ 256*RSVP_OBJ_ERO+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_RRO+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_ERROR_SPEC+RSVP_CTYPE_IPV4, "IPv4" },
{ 256*RSVP_OBJ_ERROR_SPEC+RSVP_CTYPE_IPV6, "IPv6" },
{ 256*RSVP_OBJ_ERROR_SPEC+RSVP_CTYPE_3, "IPv4 plus opt. TLVs" },
{ 256*RSVP_OBJ_ERROR_SPEC+RSVP_CTYPE_4, "IPv6 plus opt. TLVs" },
{ 256*RSVP_OBJ_RESTART_CAPABILITY+RSVP_CTYPE_1, "IPv4" },
{ 256*RSVP_OBJ_SESSION_ATTRIBUTE+RSVP_CTYPE_TUNNEL_IPV4, "Tunnel IPv4" },
2006-09-04 20:04:42 +00:00
{ 256*RSVP_OBJ_FASTREROUTE+RSVP_CTYPE_TUNNEL_IPV4, "Tunnel IPv4" }, /* old style*/
{ 256*RSVP_OBJ_FASTREROUTE+RSVP_CTYPE_1, "1" }, /* new style */
{ 256*RSVP_OBJ_DETOUR+RSVP_CTYPE_TUNNEL_IPV4, "Tunnel IPv4" },
{ 256*RSVP_OBJ_PROPERTIES+RSVP_CTYPE_1, "1" },
2007-10-16 02:20:42 +00:00
{ 256*RSVP_OBJ_ADMIN_STATUS+RSVP_CTYPE_1, "1" },
{ 256*RSVP_OBJ_CLASSTYPE+RSVP_CTYPE_1, "1" },
2006-09-04 20:04:42 +00:00
{ 256*RSVP_OBJ_CLASSTYPE_OLD+RSVP_CTYPE_1, "1" },
2007-10-16 02:20:42 +00:00
{ 256*RSVP_OBJ_LABEL_SET+RSVP_CTYPE_1, "1" },
{ 256*RSVP_OBJ_GENERALIZED_UNI+RSVP_CTYPE_1, "1" },
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{ 256*RSVP_OBJ_S2L+RSVP_CTYPE_IPV4, "IPv4 sub-LSP" },
{ 256*RSVP_OBJ_S2L+RSVP_CTYPE_IPV6, "IPv6 sub-LSP" },
2006-09-04 20:04:42 +00:00
{ 0, NULL}
};
struct rsvp_obj_integrity_t {
2015-01-06 19:03:11 +00:00
uint8_t flags;
uint8_t res;
uint8_t key_id[6];
uint8_t sequence[8];
uint8_t digest[16];
2006-09-04 20:04:42 +00:00
};
static const struct tok rsvp_obj_integrity_flag_values[] = {
{ 0x80, "Handshake" },
{ 0, NULL}
};
2006-09-04 20:04:42 +00:00
struct rsvp_obj_frr_t {
2015-01-06 19:03:11 +00:00
uint8_t setup_prio;
uint8_t hold_prio;
uint8_t hop_limit;
uint8_t flags;
uint8_t bandwidth[4];
uint8_t include_any[4];
uint8_t exclude_any[4];
uint8_t include_all[4];
2006-09-04 20:04:42 +00:00
};
#define RSVP_OBJ_XRO_MASK_SUBOBJ(x) ((x)&0x7f)
#define RSVP_OBJ_XRO_MASK_LOOSE(x) ((x)&0x80)
#define RSVP_OBJ_XRO_RES 0
#define RSVP_OBJ_XRO_IPV4 1
#define RSVP_OBJ_XRO_IPV6 2
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
#define RSVP_OBJ_XRO_LABEL 3
#define RSVP_OBJ_XRO_ASN 32
#define RSVP_OBJ_XRO_MPLS 64
static const struct tok rsvp_obj_xro_values[] = {
{ RSVP_OBJ_XRO_RES, "Reserved" },
{ RSVP_OBJ_XRO_IPV4, "IPv4 prefix" },
{ RSVP_OBJ_XRO_IPV6, "IPv6 prefix" },
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{ RSVP_OBJ_XRO_LABEL, "Label" },
{ RSVP_OBJ_XRO_ASN, "Autonomous system number" },
{ RSVP_OBJ_XRO_MPLS, "MPLS label switched path termination" },
{ 0, NULL}
};
2006-09-04 20:04:42 +00:00
/* draft-ietf-mpls-rsvp-lsp-fastreroute-07.txt */
static const struct tok rsvp_obj_rro_flag_values[] = {
{ 0x01, "Local protection available" },
{ 0x02, "Local protection in use" },
{ 0x04, "Bandwidth protection" },
{ 0x08, "Node protection" },
{ 0, NULL}
};
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
/* RFC3209 */
static const struct tok rsvp_obj_rro_label_flag_values[] = {
{ 0x01, "Global" },
{ 0, NULL}
};
static const struct tok rsvp_resstyle_values[] = {
{ 17, "Wildcard Filter" },
{ 10, "Fixed Filter" },
{ 18, "Shared Explicit" },
{ 0, NULL}
};
#define RSVP_OBJ_INTSERV_GUARANTEED_SERV 2
#define RSVP_OBJ_INTSERV_CONTROLLED_LOAD 5
static const struct tok rsvp_intserv_service_type_values[] = {
{ 1, "Default/Global Information" },
{ RSVP_OBJ_INTSERV_GUARANTEED_SERV, "Guaranteed Service" },
{ RSVP_OBJ_INTSERV_CONTROLLED_LOAD, "Controlled Load" },
{ 0, NULL}
};
static const struct tok rsvp_intserv_parameter_id_values[] = {
{ 4, "IS hop cnt" },
{ 6, "Path b/w estimate" },
{ 8, "Minimum path latency" },
{ 10, "Composed MTU" },
{ 127, "Token Bucket TSpec" },
{ 130, "Guaranteed Service RSpec" },
{ 133, "End-to-end composed value for C" },
{ 134, "End-to-end composed value for D" },
{ 135, "Since-last-reshaping point composed C" },
{ 136, "Since-last-reshaping point composed D" },
{ 0, NULL}
};
2015-01-06 19:03:11 +00:00
static const struct tok rsvp_session_attribute_flag_values[] = {
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
{ 0x01, "Local Protection" },
{ 0x02, "Label Recording" },
{ 0x04, "SE Style" },
{ 0x08, "Bandwidth protection" }, /* RFC4090 */
{ 0x10, "Node protection" }, /* RFC4090 */
{ 0, NULL}
};
2015-01-06 19:03:11 +00:00
static const struct tok rsvp_obj_prop_tlv_values[] = {
{ 0x01, "Cos" },
{ 0x02, "Metric 1" },
{ 0x04, "Metric 2" },
{ 0x08, "CCC Status" },
{ 0x10, "Path Type" },
{ 0, NULL}
};
#define RSVP_OBJ_ERROR_SPEC_CODE_ROUTING 24
#define RSVP_OBJ_ERROR_SPEC_CODE_NOTIFY 25
2006-09-04 20:04:42 +00:00
#define RSVP_OBJ_ERROR_SPEC_CODE_DIFFSERV_TE 28
#define RSVP_OBJ_ERROR_SPEC_CODE_DIFFSERV_TE_OLD 125
2015-01-06 19:03:11 +00:00
static const struct tok rsvp_obj_error_code_values[] = {
{ RSVP_OBJ_ERROR_SPEC_CODE_ROUTING, "Routing Problem" },
{ RSVP_OBJ_ERROR_SPEC_CODE_NOTIFY, "Notify Error" },
{ RSVP_OBJ_ERROR_SPEC_CODE_DIFFSERV_TE, "Diffserv TE Error" },
2006-09-04 20:04:42 +00:00
{ RSVP_OBJ_ERROR_SPEC_CODE_DIFFSERV_TE_OLD, "Diffserv TE Error (Old)" },
{ 0, NULL}
};
2015-01-06 19:03:11 +00:00
static const struct tok rsvp_obj_error_code_routing_values[] = {
{ 1, "Bad EXPLICIT_ROUTE object" },
{ 2, "Bad strict node" },
{ 3, "Bad loose node" },
{ 4, "Bad initial subobject" },
{ 5, "No route available toward destination" },
{ 6, "Unacceptable label value" },
{ 7, "RRO indicated routing loops" },
{ 8, "non-RSVP-capable router in the path" },
{ 9, "MPLS label allocation failure" },
{ 10, "Unsupported L3PID" },
{ 0, NULL}
};
2015-01-06 19:03:11 +00:00
static const struct tok rsvp_obj_error_code_diffserv_te_values[] = {
2006-09-04 20:04:42 +00:00
{ 1, "Unexpected CT object" },
{ 2, "Unsupported CT" },
{ 3, "Invalid CT value" },
{ 4, "CT/setup priority do not form a configured TE-Class" },
{ 5, "CT/holding priority do not form a configured TE-Class" },
{ 6, "CT/setup priority and CT/holding priority do not form a configured TE-Class" },
2015-01-06 19:03:11 +00:00
{ 7, "Inconsistency between signaled PSC and signaled CT" },
2006-09-04 20:04:42 +00:00
{ 8, "Inconsistency between signaled PHBs and signaled CT" },
{ 0, NULL}
};
2007-10-16 02:20:42 +00:00
/* rfc3473 / rfc 3471 */
static const struct tok rsvp_obj_admin_status_flag_values[] = {
{ 0x80000000, "Reflect" },
{ 0x00000004, "Testing" },
{ 0x00000002, "Admin-down" },
{ 0x00000001, "Delete-in-progress" },
{ 0, NULL}
};
/* label set actions - rfc3471 */
#define LABEL_SET_INCLUSIVE_LIST 0
#define LABEL_SET_EXCLUSIVE_LIST 1
#define LABEL_SET_INCLUSIVE_RANGE 2
#define LABEL_SET_EXCLUSIVE_RANGE 3
static const struct tok rsvp_obj_label_set_action_values[] = {
{ LABEL_SET_INCLUSIVE_LIST, "Inclusive list" },
{ LABEL_SET_EXCLUSIVE_LIST, "Exclusive list" },
{ LABEL_SET_INCLUSIVE_RANGE, "Inclusive range" },
{ LABEL_SET_EXCLUSIVE_RANGE, "Exclusive range" },
{ 0, NULL}
};
2007-10-16 02:20:42 +00:00
/* OIF RSVP extensions UNI 1.0 Signaling, release 2 */
#define RSVP_GEN_UNI_SUBOBJ_SOURCE_TNA_ADDRESS 1
#define RSVP_GEN_UNI_SUBOBJ_DESTINATION_TNA_ADDRESS 2
#define RSVP_GEN_UNI_SUBOBJ_DIVERSITY 3
#define RSVP_GEN_UNI_SUBOBJ_EGRESS_LABEL 4
#define RSVP_GEN_UNI_SUBOBJ_SERVICE_LEVEL 5
static const struct tok rsvp_obj_generalized_uni_values[] = {
{ RSVP_GEN_UNI_SUBOBJ_SOURCE_TNA_ADDRESS, "Source TNA address" },
{ RSVP_GEN_UNI_SUBOBJ_DESTINATION_TNA_ADDRESS, "Destination TNA address" },
{ RSVP_GEN_UNI_SUBOBJ_DIVERSITY, "Diversity" },
{ RSVP_GEN_UNI_SUBOBJ_EGRESS_LABEL, "Egress label" },
{ RSVP_GEN_UNI_SUBOBJ_SERVICE_LEVEL, "Service level" },
{ 0, NULL}
};
2015-01-06 19:03:11 +00:00
/*
* this is a dissector for all the intserv defined
* specs as defined per rfc2215
* it is called from various rsvp objects;
* returns the amount of bytes being processed
*/
static int
2015-01-06 19:03:11 +00:00
rsvp_intserv_print(netdissect_options *ndo,
const u_char *tptr, u_short obj_tlen)
{
int parameter_id,parameter_length;
union {
float f;
2015-01-06 19:03:11 +00:00
uint32_t i;
} bw;
if (obj_tlen < 4)
return 0;
parameter_id = *(tptr);
2017-01-31 19:17:06 +00:00
ND_TCHECK2(*(tptr + 2), 2);
parameter_length = EXTRACT_16BITS(tptr+2)<<2; /* convert wordcount to bytecount */
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t Parameter ID: %s (%u), length: %u, Flags: [0x%02x]",
tok2str(rsvp_intserv_parameter_id_values,"unknown",parameter_id),
parameter_id,
parameter_length,
2015-01-06 19:03:11 +00:00
*(tptr + 1)));
if (obj_tlen < parameter_length+4)
return 0;
switch(parameter_id) { /* parameter_id */
case 4:
/*
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | 4 (e) | (f) | 1 (g) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | IS hop cnt (32-bit unsigned integer) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
2017-01-31 19:17:06 +00:00
if (parameter_length == 4) {
ND_TCHECK2(*(tptr + 4), 4);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tIS hop count: %u", EXTRACT_32BITS(tptr + 4)));
2017-01-31 19:17:06 +00:00
}
break;
case 6:
/*
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | 6 (h) | (i) | 1 (j) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Path b/w estimate (32-bit IEEE floating point number) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
if (parameter_length == 4) {
2017-01-31 19:17:06 +00:00
ND_TCHECK2(*(tptr + 4), 4);
bw.i = EXTRACT_32BITS(tptr+4);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tPath b/w estimate: %.10g Mbps", bw.f / 125000));
}
break;
case 8:
/*
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | 8 (k) | (l) | 1 (m) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Minimum path latency (32-bit integer) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
if (parameter_length == 4) {
2017-01-31 19:17:06 +00:00
ND_TCHECK2(*(tptr + 4), 4);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tMinimum path latency: "));
if (EXTRACT_32BITS(tptr+4) == 0xffffffff)
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "don't care"));
else
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%u", EXTRACT_32BITS(tptr + 4)));
}
break;
case 10:
/*
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | 10 (n) | (o) | 1 (p) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Composed MTU (32-bit unsigned integer) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
2017-01-31 19:17:06 +00:00
if (parameter_length == 4) {
ND_TCHECK2(*(tptr + 4), 4);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tComposed MTU: %u bytes", EXTRACT_32BITS(tptr + 4)));
2017-01-31 19:17:06 +00:00
}
break;
case 127:
2015-01-06 19:03:11 +00:00
/*
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | 127 (e) | 0 (f) | 5 (g) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Token Bucket Rate [r] (32-bit IEEE floating point number) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Token Bucket Size [b] (32-bit IEEE floating point number) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Peak Data Rate [p] (32-bit IEEE floating point number) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Minimum Policed Unit [m] (32-bit integer) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Maximum Packet Size [M] (32-bit integer) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
if (parameter_length == 20) {
2017-01-31 19:17:06 +00:00
ND_TCHECK2(*(tptr + 4), 20);
bw.i = EXTRACT_32BITS(tptr+4);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tToken Bucket Rate: %.10g Mbps", bw.f / 125000));
bw.i = EXTRACT_32BITS(tptr+8);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tToken Bucket Size: %.10g bytes", bw.f));
bw.i = EXTRACT_32BITS(tptr+12);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tPeak Data Rate: %.10g Mbps", bw.f / 125000));
ND_PRINT((ndo, "\n\t\tMinimum Policed Unit: %u bytes", EXTRACT_32BITS(tptr + 16)));
ND_PRINT((ndo, "\n\t\tMaximum Packet Size: %u bytes", EXTRACT_32BITS(tptr + 20)));
}
break;
case 130:
2015-01-06 19:03:11 +00:00
/*
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | 130 (h) | 0 (i) | 2 (j) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Rate [R] (32-bit IEEE floating point number) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Slack Term [S] (32-bit integer) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
if (parameter_length == 8) {
2017-01-31 19:17:06 +00:00
ND_TCHECK2(*(tptr + 4), 8);
bw.i = EXTRACT_32BITS(tptr+4);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tRate: %.10g Mbps", bw.f / 125000));
ND_PRINT((ndo, "\n\t\tSlack Term: %u", EXTRACT_32BITS(tptr + 8)));
}
break;
case 133:
case 134:
case 135:
case 136:
2017-01-31 19:17:06 +00:00
if (parameter_length == 4) {
ND_TCHECK2(*(tptr + 4), 4);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t\tValue: %u", EXTRACT_32BITS(tptr + 4)));
2017-01-31 19:17:06 +00:00
}
break;
default:
2015-01-06 19:03:11 +00:00
if (ndo->ndo_vflag <= 1)
print_unknown_data(ndo, tptr + 4, "\n\t\t", parameter_length);
}
return (parameter_length+4); /* header length 4 bytes */
2017-01-31 19:17:06 +00:00
trunc:
ND_PRINT((ndo, "%s", tstr));
return 0;
}
/*
* Clear checksum prior to signature verification.
*/
static void
rsvp_clear_checksum(void *header)
{
struct rsvp_common_header *rsvp_com_header = (struct rsvp_common_header *) header;
rsvp_com_header->checksum[0] = 0;
rsvp_com_header->checksum[1] = 0;
}
static int
2015-01-06 19:03:11 +00:00
rsvp_obj_print(netdissect_options *ndo,
2017-01-31 19:17:06 +00:00
const u_char *pptr, u_int plen, const u_char *tptr,
const char *ident, u_int tlen,
const struct rsvp_common_header *rsvp_com_header)
{
const struct rsvp_object_header *rsvp_obj_header;
const u_char *obj_tptr;
2006-09-04 20:04:42 +00:00
union {
const struct rsvp_obj_integrity_t *rsvp_obj_integrity;
const struct rsvp_obj_frr_t *rsvp_obj_frr;
} obj_ptr;
u_short rsvp_obj_len,rsvp_obj_ctype,obj_tlen,intserv_serv_tlen;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
int hexdump,processed,padbytes,error_code,error_value,i,sigcheck;
union {
float f;
2015-01-06 19:03:11 +00:00
uint32_t i;
} bw;
2015-01-06 19:03:11 +00:00
uint8_t namelen;
2007-10-16 02:20:42 +00:00
u_int action, subchannel;
while(tlen>=sizeof(struct rsvp_object_header)) {
/* did we capture enough for fully decoding the object header ? */
2015-01-06 19:03:11 +00:00
ND_TCHECK2(*tptr, sizeof(struct rsvp_object_header));
rsvp_obj_header = (const struct rsvp_object_header *)tptr;
rsvp_obj_len=EXTRACT_16BITS(rsvp_obj_header->length);
rsvp_obj_ctype=rsvp_obj_header->ctype;
if(rsvp_obj_len % 4) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%sERROR: object header size %u not a multiple of 4", ident, rsvp_obj_len));
return -1;
}
if(rsvp_obj_len < sizeof(struct rsvp_object_header)) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%sERROR: object header too short %u < %lu", ident, rsvp_obj_len,
(unsigned long)sizeof(const struct rsvp_object_header)));
return -1;
}
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s%s Object (%u) Flags: [%s",
ident,
tok2str(rsvp_obj_values,
"Unknown",
rsvp_obj_header->class_num),
rsvp_obj_header->class_num,
2015-01-06 19:03:11 +00:00
((rsvp_obj_header->class_num) & 0x80) ? "ignore" : "reject"));
if (rsvp_obj_header->class_num > 128)
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, " %s",
((rsvp_obj_header->class_num) & 0x40) ? "and forward" : "silently"));
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, " if unknown], Class-Type: %s (%u), length: %u",
tok2str(rsvp_ctype_values,
"Unknown",
((rsvp_obj_header->class_num)<<8)+rsvp_obj_ctype),
rsvp_obj_ctype,
2015-01-06 19:03:11 +00:00
rsvp_obj_len));
if(tlen < rsvp_obj_len) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%sERROR: object goes past end of objects TLV", ident));
return -1;
}
obj_tptr=tptr+sizeof(struct rsvp_object_header);
obj_tlen=rsvp_obj_len-sizeof(struct rsvp_object_header);
/* did we capture enough for fully decoding the object ? */
2015-01-06 19:03:11 +00:00
if (!ND_TTEST2(*tptr, rsvp_obj_len))
return -1;
hexdump=FALSE;
switch(rsvp_obj_header->class_num) {
case RSVP_OBJ_SESSION:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_IPV4:
if (obj_tlen < 8)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv4 DestAddress: %s, Protocol ID: 0x%02x",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
*(obj_tptr + sizeof(struct in_addr))));
ND_PRINT((ndo, "%s Flags: [0x%02x], DestPort %u",
ident,
*(obj_tptr+5),
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(obj_tptr + 6)));
obj_tlen-=8;
2015-01-06 19:03:11 +00:00
obj_tptr+=8;
break;
case RSVP_CTYPE_IPV6:
if (obj_tlen < 20)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv6 DestAddress: %s, Protocol ID: 0x%02x",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
*(obj_tptr + sizeof(struct in6_addr))));
ND_PRINT((ndo, "%s Flags: [0x%02x], DestPort %u",
ident,
2006-09-04 20:04:42 +00:00
*(obj_tptr+sizeof(struct in6_addr)+1),
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(obj_tptr + sizeof(struct in6_addr) + 2)));
obj_tlen-=20;
2015-01-06 19:03:11 +00:00
obj_tptr+=20;
break;
case RSVP_CTYPE_TUNNEL_IPV6:
if (obj_tlen < 36)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv6 Tunnel EndPoint: %s, Tunnel ID: 0x%04x, Extended Tunnel ID: %s",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr+18),
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr + 20)));
obj_tlen-=36;
2015-01-06 19:03:11 +00:00
obj_tptr+=36;
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
case RSVP_CTYPE_14: /* IPv6 p2mp LSP Tunnel */
if (obj_tlen < 26)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv6 P2MP LSP ID: 0x%08x, Tunnel ID: 0x%04x, Extended Tunnel ID: %s",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
ident,
EXTRACT_32BITS(obj_tptr),
EXTRACT_16BITS(obj_tptr+6),
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr + 8)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
obj_tlen-=26;
2015-01-06 19:03:11 +00:00
obj_tptr+=26;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
break;
case RSVP_CTYPE_13: /* IPv4 p2mp LSP Tunnel */
if (obj_tlen < 12)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv4 P2MP LSP ID: %s, Tunnel ID: 0x%04x, Extended Tunnel ID: %s",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
EXTRACT_16BITS(obj_tptr+6),
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr + 8)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
obj_tlen-=12;
2015-01-06 19:03:11 +00:00
obj_tptr+=12;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
break;
case RSVP_CTYPE_TUNNEL_IPV4:
2007-10-16 02:20:42 +00:00
case RSVP_CTYPE_UNI_IPV4:
if (obj_tlen < 12)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv4 Tunnel EndPoint: %s, Tunnel ID: 0x%04x, Extended Tunnel ID: %s",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr+6),
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr + 8)));
obj_tlen-=12;
2015-01-06 19:03:11 +00:00
obj_tptr+=12;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_CONFIRM:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_IPV4:
2006-09-04 20:04:42 +00:00
if (obj_tlen < sizeof(struct in_addr))
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv4 Receiver Address: %s",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr)));
2006-09-04 20:04:42 +00:00
obj_tlen-=sizeof(struct in_addr);
2015-01-06 19:03:11 +00:00
obj_tptr+=sizeof(struct in_addr);
break;
case RSVP_CTYPE_IPV6:
2006-09-04 20:04:42 +00:00
if (obj_tlen < sizeof(struct in6_addr))
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv6 Receiver Address: %s",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr)));
2006-09-04 20:04:42 +00:00
obj_tlen-=sizeof(struct in6_addr);
2015-01-06 19:03:11 +00:00
obj_tptr+=sizeof(struct in6_addr);
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_NOTIFY_REQ:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_IPV4:
2006-09-04 20:04:42 +00:00
if (obj_tlen < sizeof(struct in_addr))
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv4 Notify Node Address: %s",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr)));
2006-09-04 20:04:42 +00:00
obj_tlen-=sizeof(struct in_addr);
2015-01-06 19:03:11 +00:00
obj_tptr+=sizeof(struct in_addr);
break;
case RSVP_CTYPE_IPV6:
2006-09-04 20:04:42 +00:00
if (obj_tlen < sizeof(struct in6_addr))
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv6 Notify Node Address: %s",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr)));
2006-09-04 20:04:42 +00:00
obj_tlen-=sizeof(struct in6_addr);
2015-01-06 19:03:11 +00:00
obj_tptr+=sizeof(struct in6_addr);
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_SUGGESTED_LABEL: /* fall through */
case RSVP_OBJ_UPSTREAM_LABEL: /* fall through */
case RSVP_OBJ_RECOVERY_LABEL: /* fall through */
case RSVP_OBJ_LABEL:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
while(obj_tlen >= 4 ) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Label: %u", ident, EXTRACT_32BITS(obj_tptr)));
obj_tlen-=4;
obj_tptr+=4;
}
break;
case RSVP_CTYPE_2:
if (obj_tlen < 4)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Generalized Label: %u",
ident,
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr)));
obj_tlen-=4;
obj_tptr+=4;
break;
case RSVP_CTYPE_3:
if (obj_tlen < 12)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Waveband ID: %u%s Start Label: %u, Stop Label: %u",
ident,
EXTRACT_32BITS(obj_tptr),
ident,
EXTRACT_32BITS(obj_tptr+4),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr + 8)));
obj_tlen-=12;
obj_tptr+=12;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_STYLE:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
if (obj_tlen < 4)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Reservation Style: %s, Flags: [0x%02x]",
ident,
tok2str(rsvp_resstyle_values,
"Unknown",
EXTRACT_24BITS(obj_tptr+1)),
2015-01-06 19:03:11 +00:00
*(obj_tptr)));
obj_tlen-=4;
obj_tptr+=4;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_SENDER_TEMPLATE:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_IPV4:
if (obj_tlen < 8)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Source Address: %s, Source Port: %u",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr + 6)));
obj_tlen-=8;
obj_tptr+=8;
break;
case RSVP_CTYPE_IPV6:
if (obj_tlen < 20)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Source Address: %s, Source Port: %u",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr + 18)));
obj_tlen-=20;
obj_tptr+=20;
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
case RSVP_CTYPE_13: /* IPv6 p2mp LSP tunnel */
if (obj_tlen < 40)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv6 Tunnel Sender Address: %s, LSP ID: 0x%04x"
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
"%s Sub-Group Originator ID: %s, Sub-Group ID: 0x%04x",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
EXTRACT_16BITS(obj_tptr+18),
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr+20),
EXTRACT_16BITS(obj_tptr + 38)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
obj_tlen-=40;
obj_tptr+=40;
break;
case RSVP_CTYPE_TUNNEL_IPV4:
if (obj_tlen < 8)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv4 Tunnel Sender Address: %s, LSP-ID: 0x%04x",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr + 6)));
obj_tlen-=8;
obj_tptr+=8;
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
case RSVP_CTYPE_12: /* IPv4 p2mp LSP tunnel */
if (obj_tlen < 16)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv4 Tunnel Sender Address: %s, LSP ID: 0x%04x"
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
"%s Sub-Group Originator ID: %s, Sub-Group ID: 0x%04x",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
EXTRACT_16BITS(obj_tptr+6),
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr+8),
EXTRACT_16BITS(obj_tptr + 12)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
obj_tlen-=16;
obj_tptr+=16;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_LABEL_REQ:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
while(obj_tlen >= 4 ) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s L3 Protocol ID: %s",
ident,
tok2str(ethertype_values,
"Unknown Protocol (0x%04x)",
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(obj_tptr + 2))));
obj_tlen-=4;
obj_tptr+=4;
}
break;
case RSVP_CTYPE_2:
if (obj_tlen < 12)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s L3 Protocol ID: %s",
ident,
tok2str(ethertype_values,
"Unknown Protocol (0x%04x)",
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(obj_tptr + 2))));
ND_PRINT((ndo, ",%s merge capability",((*(obj_tptr + 4)) & 0x80) ? "no" : "" ));
ND_PRINT((ndo, "%s Minimum VPI/VCI: %u/%u",
ident,
(EXTRACT_16BITS(obj_tptr+4))&0xfff,
2015-01-06 19:03:11 +00:00
(EXTRACT_16BITS(obj_tptr + 6)) & 0xfff));
ND_PRINT((ndo, "%s Maximum VPI/VCI: %u/%u",
ident,
(EXTRACT_16BITS(obj_tptr+8))&0xfff,
2015-01-06 19:03:11 +00:00
(EXTRACT_16BITS(obj_tptr + 10)) & 0xfff));
obj_tlen-=12;
obj_tptr+=12;
break;
case RSVP_CTYPE_3:
if (obj_tlen < 12)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s L3 Protocol ID: %s",
ident,
tok2str(ethertype_values,
"Unknown Protocol (0x%04x)",
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(obj_tptr + 2))));
ND_PRINT((ndo, "%s Minimum/Maximum DLCI: %u/%u, %s%s bit DLCI",
ident,
(EXTRACT_32BITS(obj_tptr+4))&0x7fffff,
(EXTRACT_32BITS(obj_tptr+8))&0x7fffff,
(((EXTRACT_16BITS(obj_tptr+4)>>7)&3) == 0 ) ? "10" : "",
2015-01-06 19:03:11 +00:00
(((EXTRACT_16BITS(obj_tptr + 4) >> 7) & 3) == 2 ) ? "23" : ""));
obj_tlen-=12;
obj_tptr+=12;
break;
case RSVP_CTYPE_4:
2007-10-16 02:20:42 +00:00
if (obj_tlen < 4)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s LSP Encoding Type: %s (%u)",
ident,
tok2str(gmpls_encoding_values,
"Unknown",
*obj_tptr),
2015-01-06 19:03:11 +00:00
*obj_tptr));
ND_PRINT((ndo, "%s Switching Type: %s (%u), Payload ID: %s (0x%04x)",
ident,
tok2str(gmpls_switch_cap_values,
"Unknown",
*(obj_tptr+1)),
*(obj_tptr+1),
tok2str(gmpls_payload_values,
"Unknown",
EXTRACT_16BITS(obj_tptr+2)),
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(obj_tptr + 2)));
2007-10-16 02:20:42 +00:00
obj_tlen-=4;
obj_tptr+=4;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_RRO:
case RSVP_OBJ_ERO:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_IPV4:
while(obj_tlen >= 4 ) {
2017-01-31 19:17:06 +00:00
u_char length;
ND_TCHECK2(*obj_tptr, 4);
length = *(obj_tptr + 1);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Subobject Type: %s, length %u",
ident,
tok2str(rsvp_obj_xro_values,
"Unknown %u",
RSVP_OBJ_XRO_MASK_SUBOBJ(*obj_tptr)),
2017-01-31 19:17:06 +00:00
length));
2017-01-31 19:17:06 +00:00
if (length == 0) { /* prevent infinite loops */
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s ERROR: zero length ERO subtype", ident));
break;
}
switch(RSVP_OBJ_XRO_MASK_SUBOBJ(*obj_tptr)) {
2017-01-31 19:17:06 +00:00
u_char prefix_length;
case RSVP_OBJ_XRO_IPV4:
2017-01-31 19:17:06 +00:00
if (length != 8) {
ND_PRINT((ndo, " ERROR: length != 8"));
goto invalid;
}
ND_TCHECK2(*obj_tptr, 8);
prefix_length = *(obj_tptr+6);
if (prefix_length != 32) {
ND_PRINT((ndo, " ERROR: Prefix length %u != 32",
prefix_length));
goto invalid;
}
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, ", %s, %s/%u, Flags: [%s]",
RSVP_OBJ_XRO_MASK_LOOSE(*obj_tptr) ? "Loose" : "Strict",
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr+2),
*(obj_tptr+6),
bittok2str(rsvp_obj_rro_flag_values,
"none",
2015-01-06 19:03:11 +00:00
*(obj_tptr + 7)))); /* rfc3209 says that this field is rsvd. */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
break;
case RSVP_OBJ_XRO_LABEL:
2017-01-31 19:17:06 +00:00
if (length != 8) {
ND_PRINT((ndo, " ERROR: length != 8"));
goto invalid;
}
ND_TCHECK2(*obj_tptr, 8);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, ", Flags: [%s] (%#x), Class-Type: %s (%u), %u",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
bittok2str(rsvp_obj_rro_label_flag_values,
"none",
*(obj_tptr+2)),
*(obj_tptr+2),
tok2str(rsvp_ctype_values,
"Unknown",
*(obj_tptr+3) + 256*RSVP_OBJ_RRO),
*(obj_tptr+3),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr + 4)));
}
obj_tlen-=*(obj_tptr+1);
obj_tptr+=*(obj_tptr+1);
}
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_HELLO:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
case RSVP_CTYPE_2:
if (obj_tlen < 8)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Source Instance: 0x%08x, Destination Instance: 0x%08x",
ident,
EXTRACT_32BITS(obj_tptr),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr + 4)));
obj_tlen-=8;
obj_tptr+=8;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_RESTART_CAPABILITY:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
if (obj_tlen < 8)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Restart Time: %ums, Recovery Time: %ums",
ident,
EXTRACT_32BITS(obj_tptr),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr + 4)));
obj_tlen-=8;
obj_tptr+=8;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_SESSION_ATTRIBUTE:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_TUNNEL_IPV4:
if (obj_tlen < 4)
return-1;
namelen = *(obj_tptr+3);
if (obj_tlen < 4+namelen)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Session Name: ", ident));
for (i = 0; i < namelen; i++)
2015-01-06 19:03:11 +00:00
safeputchar(ndo, *(obj_tptr + 4 + i));
ND_PRINT((ndo, "%s Setup Priority: %u, Holding Priority: %u, Flags: [%s] (%#x)",
ident,
(int)*obj_tptr,
(int)*(obj_tptr+1),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
bittok2str(rsvp_session_attribute_flag_values,
"none",
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
*(obj_tptr+2)),
2015-01-06 19:03:11 +00:00
*(obj_tptr + 2)));
obj_tlen-=4+*(obj_tptr+3);
obj_tptr+=4+*(obj_tptr+3);
break;
default:
hexdump=TRUE;
}
break;
2007-10-16 02:20:42 +00:00
case RSVP_OBJ_GENERALIZED_UNI:
switch(rsvp_obj_ctype) {
int subobj_type,af,subobj_len,total_subobj_len;
2015-01-06 19:03:11 +00:00
case RSVP_CTYPE_1:
2007-10-16 02:20:42 +00:00
if (obj_tlen < 4)
return-1;
/* read variable length subobjects */
total_subobj_len = obj_tlen;
while(total_subobj_len > 0) {
/* If RFC 3476 Section 3.1 defined that a sub-object of the
* GENERALIZED_UNI RSVP object must have the Length field as
* a multiple of 4, instead of the check below it would be
* better to test total_subobj_len only once before the loop.
* So long as it does not define it and this while loop does
* not implement such a requirement, let's accept that within
* each iteration subobj_len may happen to be a multiple of 1
* and test it and total_subobj_len respectively.
*/
if (total_subobj_len < 4)
goto invalid;
2007-10-16 02:20:42 +00:00
subobj_len = EXTRACT_16BITS(obj_tptr);
subobj_type = (EXTRACT_16BITS(obj_tptr+2))>>8;
af = (EXTRACT_16BITS(obj_tptr+2))&0x00FF;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Subobject Type: %s (%u), AF: %s (%u), length: %u",
2007-10-16 02:20:42 +00:00
ident,
tok2str(rsvp_obj_generalized_uni_values, "Unknown", subobj_type),
subobj_type,
tok2str(af_values, "Unknown", af), af,
2015-01-06 19:03:11 +00:00
subobj_len));
2007-10-16 02:20:42 +00:00
/* In addition to what is explained above, the same spec does not
* explicitly say that the same Length field includes the 4-octet
* sub-object header, but as long as this while loop implements it
* as it does include, let's keep the check below consistent with
* the rest of the code.
*/
if(subobj_len < 4 || subobj_len > total_subobj_len)
2017-01-31 19:17:06 +00:00
goto invalid;
2007-10-16 02:20:42 +00:00
switch(subobj_type) {
case RSVP_GEN_UNI_SUBOBJ_SOURCE_TNA_ADDRESS:
case RSVP_GEN_UNI_SUBOBJ_DESTINATION_TNA_ADDRESS:
switch(af) {
case AFNUM_INET:
if (subobj_len < 8)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s UNI IPv4 TNA address: %s",
ident, ipaddr_string(ndo, obj_tptr + 4)));
2007-10-16 02:20:42 +00:00
break;
case AFNUM_INET6:
if (subobj_len < 20)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s UNI IPv6 TNA address: %s",
ident, ip6addr_string(ndo, obj_tptr + 4)));
2007-10-16 02:20:42 +00:00
break;
case AFNUM_NSAP:
if (subobj_len) {
/* unless we have a TLV parser lets just hexdump */
hexdump=TRUE;
}
break;
}
break;
case RSVP_GEN_UNI_SUBOBJ_DIVERSITY:
if (subobj_len) {
/* unless we have a TLV parser lets just hexdump */
hexdump=TRUE;
}
break;
case RSVP_GEN_UNI_SUBOBJ_EGRESS_LABEL:
if (subobj_len < 16) {
return -1;
}
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s U-bit: %x, Label type: %u, Logical port id: %u, Label: %u",
2007-10-16 02:20:42 +00:00
ident,
((EXTRACT_32BITS(obj_tptr+4))>>31),
((EXTRACT_32BITS(obj_tptr+4))&0xFF),
EXTRACT_32BITS(obj_tptr+8),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr + 12)));
2007-10-16 02:20:42 +00:00
break;
case RSVP_GEN_UNI_SUBOBJ_SERVICE_LEVEL:
if (subobj_len < 8) {
return -1;
}
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Service level: %u",
ident, (EXTRACT_32BITS(obj_tptr + 4)) >> 24));
2007-10-16 02:20:42 +00:00
break;
default:
hexdump=TRUE;
break;
}
total_subobj_len-=subobj_len;
obj_tptr+=subobj_len;
obj_tlen+=subobj_len;
}
if (total_subobj_len) {
/* unless we have a TLV parser lets just hexdump */
hexdump=TRUE;
}
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_RSVP_HOP:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_3: /* fall through - FIXME add TLV parser */
case RSVP_CTYPE_IPV4:
if (obj_tlen < 8)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Previous/Next Interface: %s, Logical Interface Handle: 0x%08x",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
EXTRACT_32BITS(obj_tptr + 4)));
obj_tlen-=8;
obj_tptr+=8;
2006-09-04 20:04:42 +00:00
if (obj_tlen)
hexdump=TRUE; /* unless we have a TLV parser lets just hexdump */
break;
case RSVP_CTYPE_4: /* fall through - FIXME add TLV parser */
case RSVP_CTYPE_IPV6:
if (obj_tlen < 20)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Previous/Next Interface: %s, Logical Interface Handle: 0x%08x",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
EXTRACT_32BITS(obj_tptr + 16)));
obj_tlen-=20;
obj_tptr+=20;
hexdump=TRUE; /* unless we have a TLV parser lets just hexdump */
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_TIME_VALUES:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
if (obj_tlen < 4)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Refresh Period: %ums",
ident,
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr)));
obj_tlen-=4;
obj_tptr+=4;
break;
default:
hexdump=TRUE;
}
break;
/* those three objects do share the same semantics */
case RSVP_OBJ_SENDER_TSPEC:
case RSVP_OBJ_ADSPEC:
case RSVP_OBJ_FLOWSPEC:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_2:
if (obj_tlen < 4)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Msg-Version: %u, length: %u",
ident,
(*obj_tptr & 0xf0) >> 4,
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(obj_tptr + 2) << 2));
obj_tptr+=4; /* get to the start of the service header */
obj_tlen-=4;
while (obj_tlen >= 4) {
intserv_serv_tlen=EXTRACT_16BITS(obj_tptr+2)<<2;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Service Type: %s (%u), break bit %s set, Service length: %u",
ident,
tok2str(rsvp_intserv_service_type_values,"unknown",*(obj_tptr)),
*(obj_tptr),
(*(obj_tptr+1)&0x80) ? "" : "not",
2015-01-06 19:03:11 +00:00
intserv_serv_tlen));
obj_tptr+=4; /* get to the start of the parameter list */
obj_tlen-=4;
while (intserv_serv_tlen>=4) {
2015-01-06 19:03:11 +00:00
processed = rsvp_intserv_print(ndo, obj_tptr, obj_tlen);
if (processed == 0)
break;
obj_tlen-=processed;
intserv_serv_tlen-=processed;
obj_tptr+=processed;
}
}
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_FILTERSPEC:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_IPV4:
if (obj_tlen < 8)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Source Address: %s, Source Port: %u",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr + 6)));
obj_tlen-=8;
obj_tptr+=8;
break;
case RSVP_CTYPE_IPV6:
if (obj_tlen < 20)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Source Address: %s, Source Port: %u",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr + 18)));
obj_tlen-=20;
obj_tptr+=20;
break;
case RSVP_CTYPE_3:
if (obj_tlen < 20)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Source Address: %s, Flow Label: %u",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
EXTRACT_24BITS(obj_tptr + 17)));
obj_tlen-=20;
obj_tptr+=20;
break;
case RSVP_CTYPE_TUNNEL_IPV6:
if (obj_tlen < 20)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Source Address: %s, LSP-ID: 0x%04x",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr + 18)));
obj_tlen-=20;
obj_tptr+=20;
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
case RSVP_CTYPE_13: /* IPv6 p2mp LSP tunnel */
if (obj_tlen < 40)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv6 Tunnel Sender Address: %s, LSP ID: 0x%04x"
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
"%s Sub-Group Originator ID: %s, Sub-Group ID: 0x%04x",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
EXTRACT_16BITS(obj_tptr+18),
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr+20),
EXTRACT_16BITS(obj_tptr + 38)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
obj_tlen-=40;
obj_tptr+=40;
break;
case RSVP_CTYPE_TUNNEL_IPV4:
if (obj_tlen < 8)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Source Address: %s, LSP-ID: 0x%04x",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
EXTRACT_16BITS(obj_tptr + 6)));
obj_tlen-=8;
obj_tptr+=8;
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
case RSVP_CTYPE_12: /* IPv4 p2mp LSP tunnel */
if (obj_tlen < 16)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s IPv4 Tunnel Sender Address: %s, LSP ID: 0x%04x"
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
"%s Sub-Group Originator ID: %s, Sub-Group ID: 0x%04x",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
EXTRACT_16BITS(obj_tptr+6),
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr+8),
EXTRACT_16BITS(obj_tptr + 12)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
obj_tlen-=16;
obj_tptr+=16;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_FASTREROUTE:
2006-09-04 20:04:42 +00:00
/* the differences between c-type 1 and 7 are minor */
obj_ptr.rsvp_obj_frr = (const struct rsvp_obj_frr_t *)obj_tptr;
switch(rsvp_obj_ctype) {
2006-09-04 20:04:42 +00:00
case RSVP_CTYPE_1: /* new style */
if (obj_tlen < sizeof(struct rsvp_obj_frr_t))
return-1;
bw.i = EXTRACT_32BITS(obj_ptr.rsvp_obj_frr->bandwidth);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Setup Priority: %u, Holding Priority: %u, Hop-limit: %u, Bandwidth: %.10g Mbps",
2006-09-04 20:04:42 +00:00
ident,
(int)obj_ptr.rsvp_obj_frr->setup_prio,
(int)obj_ptr.rsvp_obj_frr->hold_prio,
(int)obj_ptr.rsvp_obj_frr->hop_limit,
2015-01-06 19:03:11 +00:00
bw.f * 8 / 1000000));
ND_PRINT((ndo, "%s Include-any: 0x%08x, Exclude-any: 0x%08x, Include-all: 0x%08x",
2006-09-04 20:04:42 +00:00
ident,
EXTRACT_32BITS(obj_ptr.rsvp_obj_frr->include_any),
EXTRACT_32BITS(obj_ptr.rsvp_obj_frr->exclude_any),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_ptr.rsvp_obj_frr->include_all)));
2006-09-04 20:04:42 +00:00
obj_tlen-=sizeof(struct rsvp_obj_frr_t);
obj_tptr+=sizeof(struct rsvp_obj_frr_t);
break;
case RSVP_CTYPE_TUNNEL_IPV4: /* old style */
if (obj_tlen < 16)
return-1;
bw.i = EXTRACT_32BITS(obj_ptr.rsvp_obj_frr->bandwidth);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Setup Priority: %u, Holding Priority: %u, Hop-limit: %u, Bandwidth: %.10g Mbps",
ident,
2006-09-04 20:04:42 +00:00
(int)obj_ptr.rsvp_obj_frr->setup_prio,
(int)obj_ptr.rsvp_obj_frr->hold_prio,
(int)obj_ptr.rsvp_obj_frr->hop_limit,
2015-01-06 19:03:11 +00:00
bw.f * 8 / 1000000));
ND_PRINT((ndo, "%s Include Colors: 0x%08x, Exclude Colors: 0x%08x",
ident,
2006-09-04 20:04:42 +00:00
EXTRACT_32BITS(obj_ptr.rsvp_obj_frr->include_any),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_ptr.rsvp_obj_frr->exclude_any)));
obj_tlen-=16;
obj_tptr+=16;
break;
2006-09-04 20:04:42 +00:00
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_DETOUR:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_TUNNEL_IPV4:
while(obj_tlen >= 8) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s PLR-ID: %s, Avoid-Node-ID: %s",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
ipaddr_string(ndo, obj_tptr + 4)));
obj_tlen-=8;
obj_tptr+=8;
}
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_CLASSTYPE:
2006-09-04 20:04:42 +00:00
case RSVP_OBJ_CLASSTYPE_OLD: /* fall through */
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s CT: %u",
ident,
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr) & 0x7));
obj_tlen-=4;
obj_tptr+=4;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_ERROR_SPEC:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_3: /* fall through - FIXME add TLV parser */
case RSVP_CTYPE_IPV4:
if (obj_tlen < 8)
return-1;
error_code=*(obj_tptr+5);
error_value=EXTRACT_16BITS(obj_tptr+6);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Error Node Address: %s, Flags: [0x%02x]%s Error Code: %s (%u)",
ident,
2015-01-06 19:03:11 +00:00
ipaddr_string(ndo, obj_tptr),
*(obj_tptr+4),
ident,
tok2str(rsvp_obj_error_code_values,"unknown",error_code),
2015-01-06 19:03:11 +00:00
error_code));
switch (error_code) {
case RSVP_OBJ_ERROR_SPEC_CODE_ROUTING:
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, ", Error Value: %s (%u)",
tok2str(rsvp_obj_error_code_routing_values,"unknown",error_value),
2015-01-06 19:03:11 +00:00
error_value));
break;
2006-09-04 20:04:42 +00:00
case RSVP_OBJ_ERROR_SPEC_CODE_DIFFSERV_TE: /* fall through */
case RSVP_OBJ_ERROR_SPEC_CODE_DIFFSERV_TE_OLD:
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, ", Error Value: %s (%u)",
tok2str(rsvp_obj_error_code_diffserv_te_values,"unknown",error_value),
2015-01-06 19:03:11 +00:00
error_value));
break;
default:
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, ", Unknown Error Value (%u)", error_value));
break;
}
obj_tlen-=8;
obj_tptr+=8;
break;
case RSVP_CTYPE_4: /* fall through - FIXME add TLV parser */
case RSVP_CTYPE_IPV6:
if (obj_tlen < 20)
return-1;
error_code=*(obj_tptr+17);
error_value=EXTRACT_16BITS(obj_tptr+18);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Error Node Address: %s, Flags: [0x%02x]%s Error Code: %s (%u)",
ident,
2015-01-06 19:03:11 +00:00
ip6addr_string(ndo, obj_tptr),
*(obj_tptr+16),
ident,
tok2str(rsvp_obj_error_code_values,"unknown",error_code),
2015-01-06 19:03:11 +00:00
error_code));
switch (error_code) {
case RSVP_OBJ_ERROR_SPEC_CODE_ROUTING:
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, ", Error Value: %s (%u)",
tok2str(rsvp_obj_error_code_routing_values,"unknown",error_value),
2015-01-06 19:03:11 +00:00
error_value));
break;
default:
break;
}
obj_tlen-=20;
obj_tptr+=20;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_PROPERTIES:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
if (obj_tlen < 4)
return-1;
padbytes = EXTRACT_16BITS(obj_tptr+2);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s TLV count: %u, padding bytes: %u",
ident,
EXTRACT_16BITS(obj_tptr),
2015-01-06 19:03:11 +00:00
padbytes));
obj_tlen-=4;
obj_tptr+=4;
/* loop through as long there is anything longer than the TLV header (2) */
while(obj_tlen >= 2 + padbytes) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s %s TLV (0x%02x), length: %u", /* length includes header */
ident,
tok2str(rsvp_obj_prop_tlv_values,"unknown",*obj_tptr),
*obj_tptr,
2015-01-06 19:03:11 +00:00
*(obj_tptr + 1)));
if (obj_tlen < *(obj_tptr+1))
return-1;
if (*(obj_tptr+1) < 2)
return -1;
2015-01-06 19:03:11 +00:00
print_unknown_data(ndo, obj_tptr + 2, "\n\t\t", *(obj_tptr + 1) - 2);
obj_tlen-=*(obj_tptr+1);
obj_tptr+=*(obj_tptr+1);
}
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_MESSAGE_ID: /* fall through */
case RSVP_OBJ_MESSAGE_ID_ACK: /* fall through */
case RSVP_OBJ_MESSAGE_ID_LIST:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
2007-10-16 02:20:42 +00:00
case RSVP_CTYPE_2:
if (obj_tlen < 8)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Flags [0x%02x], epoch: %u",
ident,
*obj_tptr,
2015-01-06 19:03:11 +00:00
EXTRACT_24BITS(obj_tptr + 1)));
obj_tlen-=4;
obj_tptr+=4;
/* loop through as long there are no messages left */
while(obj_tlen >= 4) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Message-ID 0x%08x (%u)",
ident,
EXTRACT_32BITS(obj_tptr),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr)));
obj_tlen-=4;
obj_tptr+=4;
}
break;
default:
hexdump=TRUE;
}
break;
2006-09-04 20:04:42 +00:00
case RSVP_OBJ_INTEGRITY:
switch(rsvp_obj_ctype) {
case RSVP_CTYPE_1:
if (obj_tlen < sizeof(struct rsvp_obj_integrity_t))
return-1;
obj_ptr.rsvp_obj_integrity = (const struct rsvp_obj_integrity_t *)obj_tptr;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Key-ID 0x%04x%08x, Sequence 0x%08x%08x, Flags [%s]",
2006-09-04 20:04:42 +00:00
ident,
EXTRACT_16BITS(obj_ptr.rsvp_obj_integrity->key_id),
EXTRACT_32BITS(obj_ptr.rsvp_obj_integrity->key_id+2),
EXTRACT_32BITS(obj_ptr.rsvp_obj_integrity->sequence),
EXTRACT_32BITS(obj_ptr.rsvp_obj_integrity->sequence+4),
bittok2str(rsvp_obj_integrity_flag_values,
"none",
2015-01-06 19:03:11 +00:00
obj_ptr.rsvp_obj_integrity->flags)));
ND_PRINT((ndo, "%s MD5-sum 0x%08x%08x%08x%08x ",
2006-09-04 20:04:42 +00:00
ident,
EXTRACT_32BITS(obj_ptr.rsvp_obj_integrity->digest),
EXTRACT_32BITS(obj_ptr.rsvp_obj_integrity->digest+4),
EXTRACT_32BITS(obj_ptr.rsvp_obj_integrity->digest+8),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_ptr.rsvp_obj_integrity->digest + 12)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
2017-01-31 19:17:06 +00:00
sigcheck = signature_verify(ndo, pptr, plen,
obj_ptr.rsvp_obj_integrity->digest,
rsvp_clear_checksum,
rsvp_com_header);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, " (%s)", tok2str(signature_check_values, "Unknown", sigcheck)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
2006-09-04 20:04:42 +00:00
obj_tlen+=sizeof(struct rsvp_obj_integrity_t);
obj_tptr+=sizeof(struct rsvp_obj_integrity_t);
break;
default:
hexdump=TRUE;
}
2015-01-06 19:03:11 +00:00
break;
2006-09-04 20:04:42 +00:00
2007-10-16 02:20:42 +00:00
case RSVP_OBJ_ADMIN_STATUS:
switch(rsvp_obj_ctype) {
2015-01-06 19:03:11 +00:00
case RSVP_CTYPE_1:
2007-10-16 02:20:42 +00:00
if (obj_tlen < 4)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Flags [%s]", ident,
2007-10-16 02:20:42 +00:00
bittok2str(rsvp_obj_admin_status_flag_values, "none",
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr))));
2007-10-16 02:20:42 +00:00
obj_tlen-=4;
obj_tptr+=4;
break;
default:
hexdump=TRUE;
}
break;
case RSVP_OBJ_LABEL_SET:
switch(rsvp_obj_ctype) {
2015-01-06 19:03:11 +00:00
case RSVP_CTYPE_1:
2007-10-16 02:20:42 +00:00
if (obj_tlen < 4)
return-1;
action = (EXTRACT_16BITS(obj_tptr)>>8);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Action: %s (%u), Label type: %u", ident,
2007-10-16 02:20:42 +00:00
tok2str(rsvp_obj_label_set_action_values, "Unknown", action),
2015-01-06 19:03:11 +00:00
action, ((EXTRACT_32BITS(obj_tptr) & 0x7F))));
2007-10-16 02:20:42 +00:00
switch (action) {
case LABEL_SET_INCLUSIVE_RANGE:
case LABEL_SET_EXCLUSIVE_RANGE: /* fall through */
/* only a couple of subchannels are expected */
if (obj_tlen < 12)
return -1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Start range: %u, End range: %u", ident,
2007-10-16 02:20:42 +00:00
EXTRACT_32BITS(obj_tptr+4),
2015-01-06 19:03:11 +00:00
EXTRACT_32BITS(obj_tptr + 8)));
2007-10-16 02:20:42 +00:00
obj_tlen-=12;
obj_tptr+=12;
break;
default:
obj_tlen-=4;
obj_tptr+=4;
subchannel = 1;
while(obj_tlen >= 4 ) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Subchannel #%u: %u", ident, subchannel,
EXTRACT_32BITS(obj_tptr)));
2007-10-16 02:20:42 +00:00
obj_tptr+=4;
obj_tlen-=4;
subchannel++;
}
break;
}
break;
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
default:
hexdump=TRUE;
}
2007-10-16 02:20:42 +00:00
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
case RSVP_OBJ_S2L:
switch (rsvp_obj_ctype) {
2015-01-06 19:03:11 +00:00
case RSVP_CTYPE_IPV4:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (obj_tlen < 4)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Sub-LSP destination address: %s",
ident, ipaddr_string(ndo, obj_tptr)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
obj_tlen-=4;
obj_tptr+=4;
break;
2015-01-06 19:03:11 +00:00
case RSVP_CTYPE_IPV6:
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (obj_tlen < 16)
return-1;
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "%s Sub-LSP destination address: %s",
ident, ip6addr_string(ndo, obj_tptr)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
obj_tlen-=16;
obj_tptr+=16;
break;
2007-10-16 02:20:42 +00:00
default:
hexdump=TRUE;
}
/*
* FIXME those are the defined objects that lack a decoder
* you are welcome to contribute code ;-)
*/
case RSVP_OBJ_SCOPE:
case RSVP_OBJ_POLICY_DATA:
case RSVP_OBJ_ACCEPT_LABEL_SET:
case RSVP_OBJ_PROTECTION:
default:
2015-01-06 19:03:11 +00:00
if (ndo->ndo_vflag <= 1)
print_unknown_data(ndo, obj_tptr, "\n\t ", obj_tlen); /* FIXME indentation */
break;
}
/* do we also want to see a hex dump ? */
2015-01-06 19:03:11 +00:00
if (ndo->ndo_vflag > 1 || hexdump == TRUE)
print_unknown_data(ndo, tptr + sizeof(struct rsvp_object_header), "\n\t ", /* FIXME indentation */
rsvp_obj_len - sizeof(struct rsvp_object_header));
tptr+=rsvp_obj_len;
tlen-=rsvp_obj_len;
}
return 0;
2017-01-31 19:17:06 +00:00
invalid:
ND_PRINT((ndo, "%s", istr));
return -1;
trunc:
2017-01-31 19:17:06 +00:00
ND_PRINT((ndo, "\n\t\t"));
ND_PRINT((ndo, "%s", tstr));
return -1;
}
void
2015-01-06 19:03:11 +00:00
rsvp_print(netdissect_options *ndo,
register const u_char *pptr, register u_int len)
{
2017-01-31 19:17:06 +00:00
const struct rsvp_common_header *rsvp_com_header;
const u_char *tptr;
u_short plen, tlen;
tptr=pptr;
2017-01-31 19:17:06 +00:00
rsvp_com_header = (const struct rsvp_common_header *)pptr;
2015-01-06 19:03:11 +00:00
ND_TCHECK(*rsvp_com_header);
/*
* Sanity checking of the header.
*/
if (RSVP_EXTRACT_VERSION(rsvp_com_header->version_flags) != RSVP_VERSION) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "ERROR: RSVP version %u packet not supported",
RSVP_EXTRACT_VERSION(rsvp_com_header->version_flags)));
return;
}
/* in non-verbose mode just lets print the basic Message Type*/
2015-01-06 19:03:11 +00:00
if (ndo->ndo_vflag < 1) {
ND_PRINT((ndo, "RSVPv%u %s Message, length: %u",
RSVP_EXTRACT_VERSION(rsvp_com_header->version_flags),
tok2str(rsvp_msg_type_values, "unknown (%u)",rsvp_com_header->msg_type),
2015-01-06 19:03:11 +00:00
len));
return;
}
/* ok they seem to want to know everything - lets fully decode it */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
plen = tlen = EXTRACT_16BITS(rsvp_com_header->length);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\tRSVPv%u %s Message (%u), Flags: [%s], length: %u, ttl: %u, checksum: 0x%04x",
RSVP_EXTRACT_VERSION(rsvp_com_header->version_flags),
tok2str(rsvp_msg_type_values, "unknown, type: %u",rsvp_com_header->msg_type),
rsvp_com_header->msg_type,
bittok2str(rsvp_header_flag_values,"none",RSVP_EXTRACT_FLAGS(rsvp_com_header->version_flags)),
tlen,
rsvp_com_header->ttl,
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(rsvp_com_header->checksum)));
if (tlen < sizeof(const struct rsvp_common_header)) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "ERROR: common header too short %u < %lu", tlen,
(unsigned long)sizeof(const struct rsvp_common_header)));
return;
}
tptr+=sizeof(const struct rsvp_common_header);
tlen-=sizeof(const struct rsvp_common_header);
switch(rsvp_com_header->msg_type) {
2017-01-31 19:17:06 +00:00
case RSVP_MSGTYPE_BUNDLE:
/*
* Process each submessage in the bundle message.
* Bundle messages may not contain bundle submessages, so we don't
* need to handle bundle submessages specially.
*/
while(tlen > 0) {
2017-01-31 19:17:06 +00:00
const u_char *subpptr=tptr, *subtptr;
u_short subplen, subtlen;
subtptr=subpptr;
rsvp_com_header = (const struct rsvp_common_header *)subpptr;
2015-01-06 19:03:11 +00:00
ND_TCHECK(*rsvp_com_header);
/*
* Sanity checking of the header.
*/
if (RSVP_EXTRACT_VERSION(rsvp_com_header->version_flags) != RSVP_VERSION) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "ERROR: RSVP version %u packet not supported",
RSVP_EXTRACT_VERSION(rsvp_com_header->version_flags)));
return;
}
2017-01-31 19:17:06 +00:00
subplen = subtlen = EXTRACT_16BITS(rsvp_com_header->length);
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "\n\t RSVPv%u %s Message (%u), Flags: [%s], length: %u, ttl: %u, checksum: 0x%04x",
RSVP_EXTRACT_VERSION(rsvp_com_header->version_flags),
tok2str(rsvp_msg_type_values, "unknown, type: %u",rsvp_com_header->msg_type),
rsvp_com_header->msg_type,
bittok2str(rsvp_header_flag_values,"none",RSVP_EXTRACT_FLAGS(rsvp_com_header->version_flags)),
subtlen,
rsvp_com_header->ttl,
2015-01-06 19:03:11 +00:00
EXTRACT_16BITS(rsvp_com_header->checksum)));
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
if (subtlen < sizeof(const struct rsvp_common_header)) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "ERROR: common header too short %u < %lu", subtlen,
(unsigned long)sizeof(const struct rsvp_common_header)));
return;
}
if (tlen < subtlen) {
2015-01-06 19:03:11 +00:00
ND_PRINT((ndo, "ERROR: common header too large %u > %u", subtlen,
tlen));
return;
}
subtptr+=sizeof(const struct rsvp_common_header);
subtlen-=sizeof(const struct rsvp_common_header);
2017-01-31 19:17:06 +00:00
/*
* Print all objects in the submessage.
*/
if (rsvp_obj_print(ndo, subpptr, subplen, subtptr, "\n\t ", subtlen, rsvp_com_header) == -1)
return;
tptr+=subtlen+sizeof(const struct rsvp_common_header);
tlen-=subtlen+sizeof(const struct rsvp_common_header);
}
break;
case RSVP_MSGTYPE_PATH:
case RSVP_MSGTYPE_RESV:
case RSVP_MSGTYPE_PATHERR:
case RSVP_MSGTYPE_RESVERR:
case RSVP_MSGTYPE_PATHTEAR:
case RSVP_MSGTYPE_RESVTEAR:
case RSVP_MSGTYPE_RESVCONF:
case RSVP_MSGTYPE_HELLO_OLD:
case RSVP_MSGTYPE_HELLO:
case RSVP_MSGTYPE_ACK:
case RSVP_MSGTYPE_SREFRESH:
2017-01-31 19:17:06 +00:00
/*
* Print all objects in the message.
*/
if (rsvp_obj_print(ndo, pptr, plen, tptr, "\n\t ", tlen, rsvp_com_header) == -1)
return;
break;
2015-01-06 19:03:11 +00:00
default:
print_unknown_data(ndo, tptr, "\n\t ", tlen);
break;
}
return;
trunc:
2017-01-31 19:17:06 +00:00
ND_PRINT((ndo, "\n\t\t"));
ND_PRINT((ndo, "%s", tstr));
}