2003-08-24 01:15:40 +00:00
|
|
|
/*-
|
|
|
|
|
* Copyright (c) 2003 Jake Burkholder.
|
Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
|
|
|
* Copyright (c) 2005 - 2006 Marius Strobl <marius@FreeBSD.org>
|
2003-08-24 01:15:40 +00:00
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
#include <sys/cdefs.h>
|
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
2003-08-24 01:15:40 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
|
#include <sys/systm.h>
|
|
|
|
|
#include <sys/bus.h>
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
#include <sys/conf.h>
|
2003-08-24 01:15:40 +00:00
|
|
|
#include <sys/consio.h>
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
#include <sys/fbio.h>
|
2004-07-09 23:12:22 +00:00
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
#include <sys/module.h>
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
#include <sys/resource.h>
|
|
|
|
|
|
Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
|
|
|
#include <dev/ofw/ofw_bus.h>
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
#include <dev/ofw/openfirm.h>
|
2003-08-24 01:15:40 +00:00
|
|
|
|
|
|
|
|
#include <machine/bus.h>
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
#include <machine/bus_private.h>
|
|
|
|
|
#include <machine/ofw_machdep.h>
|
|
|
|
|
#include <machine/resource.h>
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
#include <machine/sc_machdep.h>
|
2003-08-24 01:15:40 +00:00
|
|
|
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
#include <sys/rman.h>
|
|
|
|
|
|
2003-08-24 01:15:40 +00:00
|
|
|
#include <dev/fb/fbreg.h>
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
#include <dev/fb/creatorreg.h>
|
2007-06-16 21:48:50 +00:00
|
|
|
#include <dev/fb/gfb.h>
|
2003-08-24 01:15:40 +00:00
|
|
|
#include <dev/syscons/syscons.h>
|
|
|
|
|
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
#define CREATOR_DRIVER_NAME "creator"
|
|
|
|
|
|
|
|
|
|
struct creator_softc {
|
|
|
|
|
video_adapter_t sc_va; /* XXX must be first */
|
|
|
|
|
|
|
|
|
|
phandle_t sc_node;
|
|
|
|
|
|
|
|
|
|
struct cdev *sc_si;
|
|
|
|
|
|
|
|
|
|
struct resource *sc_reg[FFB_NREG];
|
|
|
|
|
bus_space_tag_t sc_bt[FFB_NREG];
|
|
|
|
|
bus_space_handle_t sc_bh[FFB_NREG];
|
2009-04-28 20:49:47 +00:00
|
|
|
u_long sc_reg_size;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
|
2009-04-28 20:49:47 +00:00
|
|
|
u_int sc_height;
|
|
|
|
|
u_int sc_width;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
|
2009-04-28 20:49:47 +00:00
|
|
|
u_int sc_xmargin;
|
|
|
|
|
u_int sc_ymargin;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
|
2007-06-16 21:48:50 +00:00
|
|
|
const u_char *sc_font;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
|
|
|
|
|
int sc_bg_cache;
|
|
|
|
|
int sc_fg_cache;
|
|
|
|
|
int sc_fifo_cache;
|
|
|
|
|
int sc_fontinc_cache;
|
|
|
|
|
int sc_fontw_cache;
|
|
|
|
|
int sc_pmask_cache;
|
|
|
|
|
|
2009-04-28 20:49:47 +00:00
|
|
|
u_int sc_flags;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
#define CREATOR_AFB (1 << 0)
|
|
|
|
|
#define CREATOR_CONSOLE (1 << 1)
|
|
|
|
|
#define CREATOR_CUREN (1 << 2)
|
|
|
|
|
#define CREATOR_CURINV (1 << 3)
|
|
|
|
|
#define CREATOR_PAC1 (1 << 4)
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define FFB_READ(sc, reg, off) \
|
|
|
|
|
bus_space_read_4((sc)->sc_bt[(reg)], (sc)->sc_bh[(reg)], (off))
|
|
|
|
|
#define FFB_WRITE(sc, reg, off, val) \
|
|
|
|
|
bus_space_write_4((sc)->sc_bt[(reg)], (sc)->sc_bh[(reg)], (off), (val))
|
|
|
|
|
|
|
|
|
|
#define C(r, g, b) ((b << 16) | (g << 8) | (r))
|
2009-04-28 20:49:47 +00:00
|
|
|
static const uint32_t const creator_cmap[] = {
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
C(0x00, 0x00, 0x00), /* black */
|
|
|
|
|
C(0x00, 0x00, 0xff), /* blue */
|
|
|
|
|
C(0x00, 0xff, 0x00), /* green */
|
|
|
|
|
C(0x00, 0xc0, 0xc0), /* cyan */
|
|
|
|
|
C(0xff, 0x00, 0x00), /* red */
|
|
|
|
|
C(0xc0, 0x00, 0xc0), /* magenta */
|
|
|
|
|
C(0xc0, 0xc0, 0x00), /* brown */
|
|
|
|
|
C(0xc0, 0xc0, 0xc0), /* light grey */
|
|
|
|
|
C(0x80, 0x80, 0x80), /* dark grey */
|
|
|
|
|
C(0x80, 0x80, 0xff), /* light blue */
|
|
|
|
|
C(0x80, 0xff, 0x80), /* light green */
|
|
|
|
|
C(0x80, 0xff, 0xff), /* light cyan */
|
|
|
|
|
C(0xff, 0x80, 0x80), /* light red */
|
|
|
|
|
C(0xff, 0x80, 0xff), /* light magenta */
|
|
|
|
|
C(0xff, 0xff, 0x80), /* yellow */
|
|
|
|
|
C(0xff, 0xff, 0xff), /* white */
|
|
|
|
|
};
|
|
|
|
|
#undef C
|
|
|
|
|
|
|
|
|
|
static const struct {
|
|
|
|
|
vm_offset_t virt;
|
|
|
|
|
vm_paddr_t phys;
|
|
|
|
|
vm_size_t size;
|
2009-04-28 20:49:47 +00:00
|
|
|
} const creator_fb_map[] = {
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
{ FFB_VIRT_SFB8R, FFB_PHYS_SFB8R, FFB_SIZE_SFB8R },
|
|
|
|
|
{ FFB_VIRT_SFB8G, FFB_PHYS_SFB8G, FFB_SIZE_SFB8G },
|
|
|
|
|
{ FFB_VIRT_SFB8B, FFB_PHYS_SFB8B, FFB_SIZE_SFB8B },
|
|
|
|
|
{ FFB_VIRT_SFB8X, FFB_PHYS_SFB8X, FFB_SIZE_SFB8X },
|
|
|
|
|
{ FFB_VIRT_SFB32, FFB_PHYS_SFB32, FFB_SIZE_SFB32 },
|
|
|
|
|
{ FFB_VIRT_SFB64, FFB_PHYS_SFB64, FFB_SIZE_SFB64 },
|
|
|
|
|
{ FFB_VIRT_FBC, FFB_PHYS_FBC, FFB_SIZE_FBC },
|
|
|
|
|
{ FFB_VIRT_FBC_BM, FFB_PHYS_FBC_BM, FFB_SIZE_FBC_BM },
|
|
|
|
|
{ FFB_VIRT_DFB8R, FFB_PHYS_DFB8R, FFB_SIZE_DFB8R },
|
|
|
|
|
{ FFB_VIRT_DFB8G, FFB_PHYS_DFB8G, FFB_SIZE_DFB8G },
|
|
|
|
|
{ FFB_VIRT_DFB8B, FFB_PHYS_DFB8B, FFB_SIZE_DFB8B },
|
|
|
|
|
{ FFB_VIRT_DFB8X, FFB_PHYS_DFB8X, FFB_SIZE_DFB8X },
|
|
|
|
|
{ FFB_VIRT_DFB24, FFB_PHYS_DFB24, FFB_SIZE_DFB24 },
|
|
|
|
|
{ FFB_VIRT_DFB32, FFB_PHYS_DFB32, FFB_SIZE_DFB32 },
|
|
|
|
|
{ FFB_VIRT_DFB422A, FFB_PHYS_DFB422A, FFB_SIZE_DFB422A },
|
|
|
|
|
{ FFB_VIRT_DFB422AD, FFB_PHYS_DFB422AD, FFB_SIZE_DFB422AD },
|
|
|
|
|
{ FFB_VIRT_DFB24B, FFB_PHYS_DFB24B, FFB_SIZE_DFB24B },
|
|
|
|
|
{ FFB_VIRT_DFB422B, FFB_PHYS_DFB422B, FFB_SIZE_DFB422B },
|
|
|
|
|
{ FFB_VIRT_DFB422BD, FFB_PHYS_DFB422BD, FFB_SIZE_DFB422BD },
|
|
|
|
|
{ FFB_VIRT_SFB16Z, FFB_PHYS_SFB16Z, FFB_SIZE_SFB16Z },
|
|
|
|
|
{ FFB_VIRT_SFB8Z, FFB_PHYS_SFB8Z, FFB_SIZE_SFB8Z },
|
|
|
|
|
{ FFB_VIRT_SFB422, FFB_PHYS_SFB422, FFB_SIZE_SFB422 },
|
|
|
|
|
{ FFB_VIRT_SFB422D, FFB_PHYS_SFB422D, FFB_SIZE_SFB422D },
|
|
|
|
|
{ FFB_VIRT_FBC_KREG, FFB_PHYS_FBC_KREG, FFB_SIZE_FBC_KREG },
|
|
|
|
|
{ FFB_VIRT_DAC, FFB_PHYS_DAC, FFB_SIZE_DAC },
|
|
|
|
|
{ FFB_VIRT_PROM, FFB_PHYS_PROM, FFB_SIZE_PROM },
|
|
|
|
|
{ FFB_VIRT_EXP, FFB_PHYS_EXP, FFB_SIZE_EXP },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define CREATOR_FB_MAP_SIZE \
|
|
|
|
|
(sizeof(creator_fb_map) / sizeof(creator_fb_map[0]))
|
|
|
|
|
|
2007-06-16 21:48:50 +00:00
|
|
|
extern const struct gfb_font gallant12x22;
|
|
|
|
|
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
static struct creator_softc creator_softc;
|
|
|
|
|
static struct bus_space_tag creator_bst_store[FFB_FBC];
|
|
|
|
|
|
|
|
|
|
static device_probe_t creator_bus_probe;
|
|
|
|
|
static device_attach_t creator_bus_attach;
|
2003-08-24 01:15:40 +00:00
|
|
|
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
static device_method_t creator_bus_methods[] = {
|
|
|
|
|
DEVMETHOD(device_probe, creator_bus_probe),
|
|
|
|
|
DEVMETHOD(device_attach, creator_bus_attach),
|
|
|
|
|
|
|
|
|
|
{ 0, 0 }
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static devclass_t creator_devclass;
|
|
|
|
|
|
|
|
|
|
DEFINE_CLASS_0(creator, creator_bus_driver, creator_bus_methods,
|
|
|
|
|
sizeof(struct creator_softc));
|
|
|
|
|
DRIVER_MODULE(creator, nexus, creator_bus_driver, creator_devclass, 0, 0);
|
|
|
|
|
DRIVER_MODULE(creator, upa, creator_bus_driver, creator_devclass, 0, 0);
|
|
|
|
|
|
|
|
|
|
static d_open_t creator_fb_open;
|
|
|
|
|
static d_close_t creator_fb_close;
|
|
|
|
|
static d_ioctl_t creator_fb_ioctl;
|
|
|
|
|
static d_mmap_t creator_fb_mmap;
|
|
|
|
|
|
|
|
|
|
static struct cdevsw creator_fb_devsw = {
|
|
|
|
|
.d_version = D_VERSION,
|
|
|
|
|
.d_flags = D_NEEDGIANT,
|
|
|
|
|
.d_open = creator_fb_open,
|
|
|
|
|
.d_close = creator_fb_close,
|
|
|
|
|
.d_ioctl = creator_fb_ioctl,
|
|
|
|
|
.d_mmap = creator_fb_mmap,
|
|
|
|
|
.d_name = "fb",
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static void creator_cursor_enable(struct creator_softc *sc, int onoff);
|
|
|
|
|
static void creator_cursor_install(struct creator_softc *sc);
|
|
|
|
|
static void creator_shutdown(void *xsc);
|
2003-08-24 01:15:40 +00:00
|
|
|
|
|
|
|
|
static int creator_configure(int flags);
|
|
|
|
|
|
|
|
|
|
static vi_probe_t creator_probe;
|
|
|
|
|
static vi_init_t creator_init;
|
|
|
|
|
static vi_get_info_t creator_get_info;
|
|
|
|
|
static vi_query_mode_t creator_query_mode;
|
|
|
|
|
static vi_set_mode_t creator_set_mode;
|
|
|
|
|
static vi_save_font_t creator_save_font;
|
|
|
|
|
static vi_load_font_t creator_load_font;
|
|
|
|
|
static vi_show_font_t creator_show_font;
|
|
|
|
|
static vi_save_palette_t creator_save_palette;
|
|
|
|
|
static vi_load_palette_t creator_load_palette;
|
|
|
|
|
static vi_set_border_t creator_set_border;
|
|
|
|
|
static vi_save_state_t creator_save_state;
|
|
|
|
|
static vi_load_state_t creator_load_state;
|
|
|
|
|
static vi_set_win_org_t creator_set_win_org;
|
|
|
|
|
static vi_read_hw_cursor_t creator_read_hw_cursor;
|
|
|
|
|
static vi_set_hw_cursor_t creator_set_hw_cursor;
|
|
|
|
|
static vi_set_hw_cursor_shape_t creator_set_hw_cursor_shape;
|
|
|
|
|
static vi_blank_display_t creator_blank_display;
|
|
|
|
|
static vi_mmap_t creator_mmap;
|
|
|
|
|
static vi_ioctl_t creator_ioctl;
|
|
|
|
|
static vi_clear_t creator_clear;
|
|
|
|
|
static vi_fill_rect_t creator_fill_rect;
|
|
|
|
|
static vi_bitblt_t creator_bitblt;
|
|
|
|
|
static vi_diag_t creator_diag;
|
|
|
|
|
static vi_save_cursor_palette_t creator_save_cursor_palette;
|
|
|
|
|
static vi_load_cursor_palette_t creator_load_cursor_palette;
|
|
|
|
|
static vi_copy_t creator_copy;
|
|
|
|
|
static vi_putp_t creator_putp;
|
|
|
|
|
static vi_putc_t creator_putc;
|
|
|
|
|
static vi_puts_t creator_puts;
|
|
|
|
|
static vi_putm_t creator_putm;
|
|
|
|
|
|
|
|
|
|
static video_switch_t creatorvidsw = {
|
|
|
|
|
.probe = creator_probe,
|
|
|
|
|
.init = creator_init,
|
|
|
|
|
.get_info = creator_get_info,
|
|
|
|
|
.query_mode = creator_query_mode,
|
|
|
|
|
.set_mode = creator_set_mode,
|
|
|
|
|
.save_font = creator_save_font,
|
|
|
|
|
.load_font = creator_load_font,
|
|
|
|
|
.show_font = creator_show_font,
|
|
|
|
|
.save_palette = creator_save_palette,
|
|
|
|
|
.load_palette = creator_load_palette,
|
|
|
|
|
.set_border = creator_set_border,
|
|
|
|
|
.save_state = creator_save_state,
|
|
|
|
|
.load_state = creator_load_state,
|
|
|
|
|
.set_win_org = creator_set_win_org,
|
|
|
|
|
.read_hw_cursor = creator_read_hw_cursor,
|
|
|
|
|
.set_hw_cursor = creator_set_hw_cursor,
|
|
|
|
|
.set_hw_cursor_shape = creator_set_hw_cursor_shape,
|
|
|
|
|
.blank_display = creator_blank_display,
|
|
|
|
|
.mmap = creator_mmap,
|
|
|
|
|
.ioctl = creator_ioctl,
|
|
|
|
|
.clear = creator_clear,
|
|
|
|
|
.fill_rect = creator_fill_rect,
|
|
|
|
|
.bitblt = creator_bitblt,
|
|
|
|
|
.diag = creator_diag,
|
|
|
|
|
.save_cursor_palette = creator_save_cursor_palette,
|
|
|
|
|
.load_cursor_palette = creator_load_cursor_palette,
|
|
|
|
|
.copy = creator_copy,
|
|
|
|
|
.putp = creator_putp,
|
|
|
|
|
.putc = creator_putc,
|
|
|
|
|
.puts = creator_puts,
|
|
|
|
|
.putm = creator_putm
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
VIDEO_DRIVER(creator, creatorvidsw, creator_configure);
|
|
|
|
|
|
|
|
|
|
extern sc_rndr_sw_t txtrndrsw;
|
|
|
|
|
RENDERER(creator, 0, txtrndrsw, gfb_set);
|
|
|
|
|
|
|
|
|
|
RENDERER_MODULE(creator, gfb_set);
|
|
|
|
|
|
2009-04-28 20:49:47 +00:00
|
|
|
static const u_char const creator_mouse_pointer[64][8] __aligned(8) = {
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
{ 0x00, 0x00, }, /* ............ */
|
|
|
|
|
{ 0x80, 0x00, }, /* *........... */
|
|
|
|
|
{ 0xc0, 0x00, }, /* **.......... */
|
|
|
|
|
{ 0xe0, 0x00, }, /* ***......... */
|
|
|
|
|
{ 0xf0, 0x00, }, /* ****........ */
|
|
|
|
|
{ 0xf8, 0x00, }, /* *****....... */
|
|
|
|
|
{ 0xfc, 0x00, }, /* ******...... */
|
|
|
|
|
{ 0xfe, 0x00, }, /* *******..... */
|
|
|
|
|
{ 0xff, 0x00, }, /* ********.... */
|
|
|
|
|
{ 0xff, 0x80, }, /* *********... */
|
|
|
|
|
{ 0xfc, 0xc0, }, /* ******..**.. */
|
|
|
|
|
{ 0xdc, 0x00, }, /* **.***...... */
|
|
|
|
|
{ 0x8e, 0x00, }, /* *...***..... */
|
|
|
|
|
{ 0x0e, 0x00, }, /* ....***..... */
|
|
|
|
|
{ 0x07, 0x00, }, /* .....***.... */
|
|
|
|
|
{ 0x04, 0x00, }, /* .....*...... */
|
|
|
|
|
{ 0x00, 0x00, }, /* ............ */
|
|
|
|
|
{ 0x00, 0x00, }, /* ............ */
|
|
|
|
|
{ 0x00, 0x00, }, /* ............ */
|
|
|
|
|
{ 0x00, 0x00, }, /* ............ */
|
|
|
|
|
{ 0x00, 0x00, }, /* ............ */
|
|
|
|
|
{ 0x00, 0x00, }, /* ............ */
|
|
|
|
|
};
|
2003-08-24 01:15:40 +00:00
|
|
|
|
2005-07-10 11:16:34 +00:00
|
|
|
static inline void creator_ras_fifo_wait(struct creator_softc *sc, int n);
|
|
|
|
|
static inline void creator_ras_setfontinc(struct creator_softc *sc, int fontinc);
|
|
|
|
|
static inline void creator_ras_setfontw(struct creator_softc *sc, int fontw);
|
|
|
|
|
static inline void creator_ras_setbg(struct creator_softc *sc, int bg);
|
|
|
|
|
static inline void creator_ras_setfg(struct creator_softc *sc, int fg);
|
|
|
|
|
static inline void creator_ras_setpmask(struct creator_softc *sc, int pmask);
|
|
|
|
|
static inline void creator_ras_wait(struct creator_softc *sc);
|
|
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
|
creator_ras_wait(struct creator_softc *sc)
|
|
|
|
|
{
|
|
|
|
|
int ucsr;
|
|
|
|
|
int r;
|
|
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
|
ucsr = FFB_READ(sc, FFB_FBC, FFB_FBC_UCSR);
|
|
|
|
|
if ((ucsr & (FBC_UCSR_FB_BUSY | FBC_UCSR_RP_BUSY)) == 0)
|
|
|
|
|
break;
|
|
|
|
|
r = ucsr & (FBC_UCSR_READ_ERR | FBC_UCSR_FIFO_OVFL);
|
|
|
|
|
if (r != 0)
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_UCSR, r);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
|
creator_ras_fifo_wait(struct creator_softc *sc, int n)
|
|
|
|
|
{
|
|
|
|
|
int cache;
|
|
|
|
|
|
|
|
|
|
cache = sc->sc_fifo_cache;
|
|
|
|
|
while (cache < n)
|
|
|
|
|
cache = (FFB_READ(sc, FFB_FBC, FFB_FBC_UCSR) &
|
|
|
|
|
FBC_UCSR_FIFO_MASK) - 8;
|
|
|
|
|
sc->sc_fifo_cache = cache - n;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
|
creator_ras_setfontinc(struct creator_softc *sc, int fontinc)
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
if (fontinc == sc->sc_fontinc_cache)
|
|
|
|
|
return;
|
|
|
|
|
sc->sc_fontinc_cache = fontinc;
|
|
|
|
|
creator_ras_fifo_wait(sc, 1);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_FONTINC, fontinc);
|
|
|
|
|
creator_ras_wait(sc);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
|
creator_ras_setfontw(struct creator_softc *sc, int fontw)
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
if (fontw == sc->sc_fontw_cache)
|
|
|
|
|
return;
|
|
|
|
|
sc->sc_fontw_cache = fontw;
|
|
|
|
|
creator_ras_fifo_wait(sc, 1);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_FONTW, fontw);
|
|
|
|
|
creator_ras_wait(sc);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
|
creator_ras_setbg(struct creator_softc *sc, int bg)
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
if (bg == sc->sc_bg_cache)
|
|
|
|
|
return;
|
|
|
|
|
sc->sc_bg_cache = bg;
|
|
|
|
|
creator_ras_fifo_wait(sc, 1);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_BG, bg);
|
|
|
|
|
creator_ras_wait(sc);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
|
creator_ras_setfg(struct creator_softc *sc, int fg)
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
if (fg == sc->sc_fg_cache)
|
|
|
|
|
return;
|
|
|
|
|
sc->sc_fg_cache = fg;
|
|
|
|
|
creator_ras_fifo_wait(sc, 1);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_FG, fg);
|
|
|
|
|
creator_ras_wait(sc);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
|
creator_ras_setpmask(struct creator_softc *sc, int pmask)
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
if (pmask == sc->sc_pmask_cache)
|
|
|
|
|
return;
|
|
|
|
|
sc->sc_pmask_cache = pmask;
|
|
|
|
|
creator_ras_fifo_wait(sc, 1);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_PMASK, pmask);
|
|
|
|
|
creator_ras_wait(sc);
|
|
|
|
|
}
|
|
|
|
|
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
/*
|
|
|
|
|
* video driver interface
|
|
|
|
|
*/
|
2003-08-24 01:15:40 +00:00
|
|
|
static int
|
|
|
|
|
creator_configure(int flags)
|
|
|
|
|
{
|
|
|
|
|
struct creator_softc *sc;
|
|
|
|
|
phandle_t chosen;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
phandle_t output;
|
2004-04-04 12:52:22 +00:00
|
|
|
ihandle_t stdout;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
bus_addr_t addr;
|
|
|
|
|
char buf[sizeof("SUNW,ffb")];
|
2003-08-24 01:15:40 +00:00
|
|
|
int i;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
int space;
|
2003-08-24 01:15:40 +00:00
|
|
|
|
2005-06-04 21:15:27 +00:00
|
|
|
/*
|
|
|
|
|
* For the high-level console probing return the number of
|
|
|
|
|
* registered adapters.
|
|
|
|
|
*/
|
|
|
|
|
if (!(flags & VIO_PROBE_ONLY)) {
|
|
|
|
|
for (i = 0; vid_find_adapter(CREATOR_DRIVER_NAME, i) >= 0; i++)
|
|
|
|
|
;
|
|
|
|
|
return (i);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Low-level console probing and initialization. */
|
|
|
|
|
|
2003-11-11 07:34:08 +00:00
|
|
|
sc = &creator_softc;
|
2005-06-04 21:15:27 +00:00
|
|
|
if (sc->sc_va.va_flags & V_ADP_REGISTERED)
|
|
|
|
|
goto found;
|
|
|
|
|
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
if ((chosen = OF_finddevice("/chosen")) == -1)
|
|
|
|
|
return (0);
|
|
|
|
|
if (OF_getprop(chosen, "stdout", &stdout, sizeof(stdout)) == -1)
|
|
|
|
|
return (0);
|
|
|
|
|
if ((output = OF_instance_to_package(stdout)) == -1)
|
|
|
|
|
return (0);
|
|
|
|
|
if (OF_getprop(output, "name", buf, sizeof(buf)) == -1)
|
|
|
|
|
return (0);
|
|
|
|
|
if (strcmp(buf, "SUNW,ffb") == 0 || strcmp(buf, "SUNW,afb") == 0) {
|
2005-06-04 21:15:27 +00:00
|
|
|
sc->sc_flags = CREATOR_CONSOLE;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
if (strcmp(buf, "SUNW,afb") == 0)
|
|
|
|
|
sc->sc_flags |= CREATOR_AFB;
|
|
|
|
|
sc->sc_node = output;
|
|
|
|
|
} else
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
for (i = FFB_DAC; i <= FFB_FBC; i++) {
|
|
|
|
|
if (OF_decode_addr(output, i, &space, &addr) != 0)
|
|
|
|
|
return (0);
|
|
|
|
|
sc->sc_bt[i] = &creator_bst_store[i - FFB_DAC];
|
|
|
|
|
sc->sc_bh[i] = sparc64_fake_bustag(space, addr, sc->sc_bt[i]);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
if (creator_init(0, &sc->sc_va, 0) < 0)
|
|
|
|
|
return (0);
|
2003-08-24 01:15:40 +00:00
|
|
|
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
found:
|
|
|
|
|
/* Return number of found adapters. */
|
|
|
|
|
return (1);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
creator_probe(int unit, video_adapter_t **adpp, void *arg, int flags)
|
2003-08-24 01:15:40 +00:00
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_init(int unit, video_adapter_t *adp, int flags)
|
|
|
|
|
{
|
|
|
|
|
struct creator_softc *sc;
|
|
|
|
|
phandle_t options;
|
|
|
|
|
video_info_t *vi;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
char buf[sizeof("screen-#columns")];
|
2003-08-24 01:15:40 +00:00
|
|
|
|
|
|
|
|
sc = (struct creator_softc *)adp;
|
|
|
|
|
vi = &adp->va_info;
|
|
|
|
|
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
vid_init_struct(adp, CREATOR_DRIVER_NAME, -1, unit);
|
|
|
|
|
|
2009-04-14 20:51:58 +00:00
|
|
|
if (OF_getprop(sc->sc_node, "height", &sc->sc_height,
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
sizeof(sc->sc_height)) == -1)
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
if (OF_getprop(sc->sc_node, "width", &sc->sc_width,
|
|
|
|
|
sizeof(sc->sc_width)) == -1)
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
if ((options = OF_finddevice("/options")) == -1)
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
if (OF_getprop(options, "screen-#rows", buf, sizeof(buf)) == -1)
|
|
|
|
|
return (ENXIO);
|
2003-08-24 01:15:40 +00:00
|
|
|
vi->vi_height = strtol(buf, NULL, 10);
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
if (OF_getprop(options, "screen-#columns", buf, sizeof(buf)) == -1)
|
|
|
|
|
return (ENXIO);
|
2003-08-24 01:15:40 +00:00
|
|
|
vi->vi_width = strtol(buf, NULL, 10);
|
2007-06-16 21:48:50 +00:00
|
|
|
vi->vi_cwidth = gallant12x22.width;
|
|
|
|
|
vi->vi_cheight = gallant12x22.height;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
vi->vi_flags = V_INFO_COLOR;
|
|
|
|
|
vi->vi_mem_model = V_INFO_MM_OTHER;
|
2003-08-24 01:15:40 +00:00
|
|
|
|
2007-06-16 21:48:50 +00:00
|
|
|
sc->sc_font = gallant12x22.data;
|
2003-08-24 01:15:40 +00:00
|
|
|
sc->sc_xmargin = (sc->sc_width - (vi->vi_width * vi->vi_cwidth)) / 2;
|
|
|
|
|
sc->sc_ymargin = (sc->sc_height - (vi->vi_height * vi->vi_cheight)) / 2;
|
|
|
|
|
|
2005-07-10 11:16:34 +00:00
|
|
|
creator_set_mode(adp, 0);
|
2003-08-24 01:15:40 +00:00
|
|
|
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
if (!(sc->sc_flags & CREATOR_AFB)) {
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE, FFB_DAC_CFG_DID);
|
|
|
|
|
if (((FFB_READ(sc, FFB_DAC, FFB_DAC_VALUE) &
|
|
|
|
|
FFB_DAC_CFG_DID_PNUM) >> 12) != 0x236e) {
|
2009-04-14 20:51:58 +00:00
|
|
|
sc->sc_flags |= CREATOR_PAC1;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE, FFB_DAC_CFG_UCTRL);
|
|
|
|
|
if (((FFB_READ(sc, FFB_DAC, FFB_DAC_VALUE) &
|
|
|
|
|
FFB_DAC_UCTRL_MANREV) >> 8) <= 2)
|
|
|
|
|
sc->sc_flags |= CREATOR_CURINV;
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2005-07-10 11:16:34 +00:00
|
|
|
creator_blank_display(adp, V_DISPLAY_ON);
|
|
|
|
|
creator_clear(adp);
|
2003-08-24 01:15:40 +00:00
|
|
|
|
2005-07-10 11:16:34 +00:00
|
|
|
/*
|
|
|
|
|
* Setting V_ADP_MODECHANGE serves as hack so creator_set_mode()
|
|
|
|
|
* (which will invalidate our caches and restore our settings) is
|
2009-04-14 20:51:58 +00:00
|
|
|
* called when the X server shuts down. Otherwise screen corruption
|
2005-07-10 11:16:34 +00:00
|
|
|
* happens most of the time.
|
|
|
|
|
*/
|
|
|
|
|
adp->va_flags |= V_ADP_COLOR | V_ADP_MODECHANGE | V_ADP_BORDER |
|
|
|
|
|
V_ADP_INITIALIZED;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
if (vid_register(adp) < 0)
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
adp->va_flags |= V_ADP_REGISTERED;
|
2003-08-24 01:15:40 +00:00
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_get_info(video_adapter_t *adp, int mode, video_info_t *info)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
2003-08-24 01:15:40 +00:00
|
|
|
bcopy(&adp->va_info, info, sizeof(*info));
|
|
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_query_mode(video_adapter_t *adp, video_info_t *info)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_set_mode(video_adapter_t *adp, int mode)
|
|
|
|
|
{
|
2005-07-10 11:16:34 +00:00
|
|
|
struct creator_softc *sc;
|
2003-08-24 01:15:40 +00:00
|
|
|
|
2005-07-10 11:16:34 +00:00
|
|
|
sc = (struct creator_softc *)adp;
|
|
|
|
|
sc->sc_bg_cache = -1;
|
|
|
|
|
sc->sc_fg_cache = -1;
|
|
|
|
|
sc->sc_fontinc_cache = -1;
|
|
|
|
|
sc->sc_fontw_cache = -1;
|
|
|
|
|
sc->sc_pmask_cache = -1;
|
|
|
|
|
|
|
|
|
|
creator_ras_wait(sc);
|
|
|
|
|
sc->sc_fifo_cache = 0;
|
|
|
|
|
creator_ras_fifo_wait(sc, 2);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_PPC, FBC_PPC_VCE_DIS |
|
|
|
|
|
FBC_PPC_TBE_OPAQUE | FBC_PPC_APE_DIS | FBC_PPC_CS_CONST);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_FBC, FFB_FBC_WB_A | FFB_FBC_RB_A |
|
|
|
|
|
FFB_FBC_SB_BOTH | FFB_FBC_XE_OFF | FFB_FBC_RGBE_MASK);
|
|
|
|
|
return (0);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
2005-09-28 14:54:07 +00:00
|
|
|
creator_save_font(video_adapter_t *adp, int page, int size, int width,
|
|
|
|
|
u_char *data, int c, int count)
|
2003-08-24 01:15:40 +00:00
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
2005-09-28 14:54:07 +00:00
|
|
|
creator_load_font(video_adapter_t *adp, int page, int size, int width,
|
|
|
|
|
u_char *data, int c, int count)
|
2003-08-24 01:15:40 +00:00
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_show_font(video_adapter_t *adp, int page)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_save_palette(video_adapter_t *adp, u_char *palette)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_load_palette(video_adapter_t *adp, u_char *palette)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_set_border(video_adapter_t *adp, int border)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
struct creator_softc *sc;
|
|
|
|
|
|
|
|
|
|
sc = (struct creator_softc *)adp;
|
|
|
|
|
creator_fill_rect(adp, border, 0, 0, sc->sc_width, sc->sc_ymargin);
|
|
|
|
|
creator_fill_rect(adp, border, 0, sc->sc_height - sc->sc_ymargin,
|
|
|
|
|
sc->sc_width, sc->sc_ymargin);
|
|
|
|
|
creator_fill_rect(adp, border, 0, 0, sc->sc_xmargin, sc->sc_height);
|
|
|
|
|
creator_fill_rect(adp, border, sc->sc_width - sc->sc_xmargin, 0,
|
|
|
|
|
sc->sc_xmargin, sc->sc_height);
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_save_state(video_adapter_t *adp, void *p, size_t size)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_load_state(video_adapter_t *adp, void *p)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_set_win_org(video_adapter_t *adp, off_t offset)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_read_hw_cursor(video_adapter_t *adp, int *col, int *row)
|
|
|
|
|
{
|
|
|
|
|
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
*col = 0;
|
|
|
|
|
*row = 0;
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_set_hw_cursor(video_adapter_t *adp, int col, int row)
|
|
|
|
|
{
|
|
|
|
|
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_set_hw_cursor_shape(video_adapter_t *adp, int base, int height,
|
|
|
|
|
int celsize, int blink)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_blank_display(video_adapter_t *adp, int mode)
|
|
|
|
|
{
|
|
|
|
|
struct creator_softc *sc;
|
2005-07-10 11:16:34 +00:00
|
|
|
uint32_t v;
|
|
|
|
|
int i;
|
2003-08-24 01:15:40 +00:00
|
|
|
|
|
|
|
|
sc = (struct creator_softc *)adp;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE, FFB_DAC_CFG_TGEN);
|
2003-08-24 01:15:40 +00:00
|
|
|
v = FFB_READ(sc, FFB_DAC, FFB_DAC_VALUE);
|
2005-07-10 11:16:34 +00:00
|
|
|
switch (mode) {
|
|
|
|
|
case V_DISPLAY_ON:
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
v |= FFB_DAC_CFG_TGEN_VIDE;
|
2005-07-10 11:16:34 +00:00
|
|
|
break;
|
|
|
|
|
case V_DISPLAY_BLANK:
|
|
|
|
|
case V_DISPLAY_STAND_BY:
|
|
|
|
|
case V_DISPLAY_SUSPEND:
|
|
|
|
|
v &= ~FFB_DAC_CFG_TGEN_VIDE;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE, FFB_DAC_CFG_TGEN);
|
2003-08-24 01:15:40 +00:00
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_VALUE, v);
|
2005-07-10 11:16:34 +00:00
|
|
|
for (i = 0; i < 10; i++) {
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE, FFB_DAC_CFG_TGEN);
|
|
|
|
|
(void)FFB_READ(sc, FFB_DAC, FFB_DAC_VALUE);
|
|
|
|
|
}
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_mmap(video_adapter_t *adp, vm_offset_t offset, vm_paddr_t *paddr,
|
|
|
|
|
int prot)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (EINVAL);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_ioctl(video_adapter_t *adp, u_long cmd, caddr_t data)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
struct creator_softc *sc;
|
|
|
|
|
struct fbcursor *fbc;
|
|
|
|
|
struct fbtype *fb;
|
|
|
|
|
|
|
|
|
|
sc = (struct creator_softc *)adp;
|
|
|
|
|
switch (cmd) {
|
|
|
|
|
case FBIOGTYPE:
|
|
|
|
|
fb = (struct fbtype *)data;
|
|
|
|
|
fb->fb_type = FBTYPE_CREATOR;
|
|
|
|
|
fb->fb_height = sc->sc_height;
|
|
|
|
|
fb->fb_width = sc->sc_width;
|
|
|
|
|
fb->fb_depth = fb->fb_cmsize = fb->fb_size = 0;
|
|
|
|
|
break;
|
|
|
|
|
case FBIOSCURSOR:
|
|
|
|
|
fbc = (struct fbcursor *)data;
|
2005-06-04 21:15:27 +00:00
|
|
|
if (fbc->set & FB_CUR_SETCUR && fbc->enable == 0) {
|
|
|
|
|
creator_cursor_enable(sc, 0);
|
|
|
|
|
sc->sc_flags &= ~CREATOR_CUREN;
|
|
|
|
|
} else
|
|
|
|
|
return (ENODEV);
|
|
|
|
|
break;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
return (fb_commonioctl(adp, cmd, data));
|
|
|
|
|
}
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_clear(video_adapter_t *adp)
|
|
|
|
|
{
|
2005-07-10 11:16:34 +00:00
|
|
|
struct creator_softc *sc;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
2005-07-10 11:16:34 +00:00
|
|
|
sc = (struct creator_softc *)adp;
|
|
|
|
|
creator_fill_rect(adp, (SC_NORM_ATTR >> 4) & 0xf, 0, 0, sc->sc_width,
|
|
|
|
|
sc->sc_height);
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_fill_rect(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
struct creator_softc *sc;
|
|
|
|
|
|
|
|
|
|
sc = (struct creator_softc *)adp;
|
2005-07-10 11:16:34 +00:00
|
|
|
creator_ras_setpmask(sc, 0xffffffff);
|
|
|
|
|
creator_ras_fifo_wait(sc, 2);
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_ROP, FBC_ROP_NEW);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_DRAWOP, FBC_DRAWOP_RECTANGLE);
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
creator_ras_setfg(sc, creator_cmap[val & 0xf]);
|
2005-07-10 11:16:34 +00:00
|
|
|
/*
|
|
|
|
|
* Note that at least the Elite3D cards are sensitive to the order
|
|
|
|
|
* of operations here.
|
|
|
|
|
*/
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
creator_ras_fifo_wait(sc, 4);
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_BY, y);
|
2005-07-10 11:16:34 +00:00
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_BX, x);
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_BH, cy);
|
2005-07-10 11:16:34 +00:00
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_BW, cx);
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
creator_ras_wait(sc);
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_bitblt(video_adapter_t *adp, ...)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
2005-07-10 11:16:34 +00:00
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_diag(video_adapter_t *adp, int level)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
video_info_t info;
|
|
|
|
|
|
|
|
|
|
fb_dump_adp_info(adp->va_name, adp, level);
|
|
|
|
|
creator_get_info(adp, 0, &info);
|
|
|
|
|
fb_dump_mode_info(adp->va_name, adp, &info, level);
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_save_cursor_palette(video_adapter_t *adp, u_char *palette)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_load_cursor_palette(video_adapter_t *adp, u_char *palette)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_copy(video_adapter_t *adp, vm_offset_t src, vm_offset_t dst, int n)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_putp(video_adapter_t *adp, vm_offset_t off, u_int32_t p, u_int32_t a,
|
|
|
|
|
int size, int bpp, int bit_ltor, int byte_ltor)
|
|
|
|
|
{
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
|
|
|
|
|
return (ENODEV);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_putc(video_adapter_t *adp, vm_offset_t off, u_int8_t c, u_int8_t a)
|
|
|
|
|
{
|
|
|
|
|
struct creator_softc *sc;
|
2007-06-16 21:48:50 +00:00
|
|
|
const uint16_t *p;
|
2003-08-24 01:15:40 +00:00
|
|
|
int row;
|
|
|
|
|
int col;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
sc = (struct creator_softc *)adp;
|
|
|
|
|
row = (off / adp->va_info.vi_width) * adp->va_info.vi_cheight;
|
|
|
|
|
col = (off % adp->va_info.vi_width) * adp->va_info.vi_cwidth;
|
2007-06-16 21:48:50 +00:00
|
|
|
p = (const uint16_t *)sc->sc_font + (c * adp->va_info.vi_cheight);
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
creator_ras_setfg(sc, creator_cmap[a & 0xf]);
|
|
|
|
|
creator_ras_setbg(sc, creator_cmap[(a >> 4) & 0xf]);
|
2005-07-10 11:16:34 +00:00
|
|
|
creator_ras_fifo_wait(sc, 1 + adp->va_info.vi_cheight);
|
2003-08-24 01:15:40 +00:00
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_FONTXY,
|
|
|
|
|
((row + sc->sc_ymargin) << 16) | (col + sc->sc_xmargin));
|
2005-07-10 11:16:34 +00:00
|
|
|
creator_ras_setfontw(sc, adp->va_info.vi_cwidth);
|
|
|
|
|
creator_ras_setfontinc(sc, 0x10000);
|
2003-08-24 01:15:40 +00:00
|
|
|
for (i = 0; i < adp->va_info.vi_cheight; i++) {
|
|
|
|
|
FFB_WRITE(sc, FFB_FBC, FFB_FBC_FONT, *p++ << 16);
|
|
|
|
|
}
|
|
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_puts(video_adapter_t *adp, vm_offset_t off, u_int16_t *s, int len)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < len; i++) {
|
2007-12-29 23:26:59 +00:00
|
|
|
vidd_putc(adp, off + i, s[i] & 0xff, (s[i] & 0xff00) >> 8);
|
2003-08-24 01:15:40 +00:00
|
|
|
}
|
2007-12-29 23:26:59 +00:00
|
|
|
|
2003-08-24 01:15:40 +00:00
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_putm(video_adapter_t *adp, int x, int y, u_int8_t *pixel_image,
|
2005-09-28 14:54:07 +00:00
|
|
|
u_int32_t pixel_mask, int size, int width)
|
2003-08-24 01:15:40 +00:00
|
|
|
{
|
|
|
|
|
struct creator_softc *sc;
|
|
|
|
|
|
|
|
|
|
sc = (struct creator_softc *)adp;
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
if (!(sc->sc_flags & CREATOR_CUREN)) {
|
|
|
|
|
creator_cursor_install(sc);
|
|
|
|
|
creator_cursor_enable(sc, 1);
|
|
|
|
|
sc->sc_flags |= CREATOR_CUREN;
|
|
|
|
|
}
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE2, FFB_DAC_CUR_POS);
|
2003-08-24 01:15:40 +00:00
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_VALUE2,
|
|
|
|
|
((y + sc->sc_ymargin) << 16) | (x + sc->sc_xmargin));
|
|
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
/*
|
|
|
|
|
* bus interface
|
|
|
|
|
*/
|
|
|
|
|
static int
|
|
|
|
|
creator_bus_probe(device_t dev)
|
|
|
|
|
{
|
|
|
|
|
const char *name;
|
|
|
|
|
phandle_t node;
|
|
|
|
|
int type;
|
|
|
|
|
|
Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
|
|
|
name = ofw_bus_get_name(dev);
|
|
|
|
|
node = ofw_bus_get_node(dev);
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
if (strcmp(name, "SUNW,ffb") == 0) {
|
|
|
|
|
if (OF_getprop(node, "board_type", &type, sizeof(type)) == -1)
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
switch (type & 7) {
|
|
|
|
|
case 0x0:
|
|
|
|
|
device_set_desc(dev, "Creator");
|
|
|
|
|
break;
|
|
|
|
|
case 0x3:
|
|
|
|
|
device_set_desc(dev, "Creator3D");
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
}
|
|
|
|
|
} else if (strcmp(name, "SUNW,afb") == 0)
|
|
|
|
|
device_set_desc(dev, "Elite3D");
|
|
|
|
|
else
|
|
|
|
|
return (ENXIO);
|
|
|
|
|
return (BUS_PROBE_DEFAULT);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_bus_attach(device_t dev)
|
|
|
|
|
{
|
|
|
|
|
struct creator_softc *sc;
|
|
|
|
|
video_adapter_t *adp;
|
|
|
|
|
video_switch_t *sw;
|
|
|
|
|
phandle_t node;
|
|
|
|
|
int error;
|
Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
|
|
|
int rid;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
int unit;
|
|
|
|
|
int i;
|
|
|
|
|
|
Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
|
|
|
node = ofw_bus_get_node(dev);
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
if ((sc = (struct creator_softc *)vid_get_adapter(vid_find_adapter(
|
|
|
|
|
CREATOR_DRIVER_NAME, 0))) != NULL && sc->sc_node == node) {
|
2009-04-14 20:51:58 +00:00
|
|
|
device_printf(dev, "console\n");
|
|
|
|
|
device_set_softc(dev, sc);
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
} else {
|
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
|
sc->sc_node = node;
|
|
|
|
|
}
|
|
|
|
|
adp = &sc->sc_va;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Allocate resources regardless of whether we are the console
|
|
|
|
|
* and already obtained the bus tags and handles for the FFB_DAC
|
|
|
|
|
* and FFB_FBC register banks in creator_configure() or not so
|
|
|
|
|
* the resources are marked as taken in the respective RMAN.
|
|
|
|
|
* The supported cards use either 15 (Creator, Elite3D?) or 24
|
2009-04-14 20:51:58 +00:00
|
|
|
* (Creator3D?) register banks. We make sure that we can also
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
* allocate the resources for at least the FFB_DAC and FFB_FBC
|
2009-04-14 20:51:58 +00:00
|
|
|
* banks here. We try but don't actually care whether we can
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
* allocate more than these two resources and just limit the
|
|
|
|
|
* range accessible via creator_fb_mmap() accordingly.
|
|
|
|
|
*/
|
Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
|
|
|
for (i = 0; i < FFB_NREG; i++) {
|
|
|
|
|
rid = i;
|
|
|
|
|
sc->sc_reg[i] = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
|
|
|
&rid, RF_ACTIVE);
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
if (sc->sc_reg[i] == NULL) {
|
|
|
|
|
if (i <= FFB_FBC) {
|
|
|
|
|
device_printf(dev,
|
|
|
|
|
"cannot allocate resources\n");
|
|
|
|
|
error = ENXIO;
|
|
|
|
|
goto fail;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
sc->sc_bt[i] = rman_get_bustag(sc->sc_reg[i]);
|
|
|
|
|
sc->sc_bh[i] = rman_get_bushandle(sc->sc_reg[i]);
|
|
|
|
|
}
|
|
|
|
|
/*
|
2009-04-28 20:49:47 +00:00
|
|
|
* The XFree86/X.Org sunffb(4) expects to be able to access the
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
* memory spanned by the first and the last resource as one chunk
|
|
|
|
|
* via creator_fb_mmap(), using offsets from the first resource,
|
|
|
|
|
* even though the backing resources are actually non-continuous.
|
|
|
|
|
* So make sure that the memory we provide is at least backed by
|
|
|
|
|
* increasing resources.
|
|
|
|
|
*/
|
|
|
|
|
for (i = 1; i < FFB_NREG && sc->sc_reg[i] != NULL &&
|
|
|
|
|
rman_get_start(sc->sc_reg[i]) > rman_get_start(sc->sc_reg[i - 1]);
|
|
|
|
|
i++)
|
|
|
|
|
;
|
2009-04-28 20:49:47 +00:00
|
|
|
sc->sc_reg_size = rman_get_end(sc->sc_reg[i - 1]) -
|
|
|
|
|
rman_get_start(sc->sc_reg[0]) + 1;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
|
|
|
|
|
if (!(sc->sc_flags & CREATOR_CONSOLE)) {
|
|
|
|
|
if ((sw = vid_get_switch(CREATOR_DRIVER_NAME)) == NULL) {
|
|
|
|
|
device_printf(dev, "cannot get video switch\n");
|
|
|
|
|
error = ENODEV;
|
|
|
|
|
goto fail;
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
* During device configuration we don't necessarily probe
|
|
|
|
|
* the adapter which is the console first so we can't use
|
2009-04-14 20:51:58 +00:00
|
|
|
* the device unit number for the video adapter unit. The
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
* worst case would be that we use the video adapter unit
|
2009-04-14 20:51:58 +00:00
|
|
|
* 0 twice. As it doesn't really matter which unit number
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
* the corresponding video adapter has just use the next
|
|
|
|
|
* unused one.
|
|
|
|
|
*/
|
|
|
|
|
for (i = 0; i < devclass_get_maxunit(creator_devclass); i++)
|
|
|
|
|
if (vid_find_adapter(CREATOR_DRIVER_NAME, i) < 0)
|
|
|
|
|
break;
|
Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
|
|
|
if (strcmp(ofw_bus_get_name(dev), "SUNW,afb") == 0)
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
sc->sc_flags |= CREATOR_AFB;
|
|
|
|
|
if ((error = sw->init(i, adp, 0)) != 0) {
|
|
|
|
|
device_printf(dev, "cannot initialize adapter\n");
|
2009-04-14 20:51:58 +00:00
|
|
|
goto fail;
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (bootverbose) {
|
|
|
|
|
if (sc->sc_flags & CREATOR_PAC1)
|
|
|
|
|
device_printf(dev,
|
|
|
|
|
"BT9068/PAC1 RAMDAC (%s cursor control)\n",
|
|
|
|
|
sc->sc_flags & CREATOR_CURINV ? "inverted" :
|
|
|
|
|
"normal");
|
|
|
|
|
else
|
|
|
|
|
device_printf(dev, "BT498/PAC2 RAMDAC\n");
|
|
|
|
|
}
|
|
|
|
|
device_printf(dev, "resolution %dx%d\n", sc->sc_width, sc->sc_height);
|
|
|
|
|
|
|
|
|
|
unit = device_get_unit(dev);
|
|
|
|
|
sc->sc_si = make_dev(&creator_fb_devsw, unit, UID_ROOT, GID_WHEEL,
|
|
|
|
|
0600, "fb%d", unit);
|
|
|
|
|
sc->sc_si->si_drv1 = sc;
|
|
|
|
|
|
|
|
|
|
EVENTHANDLER_REGISTER(shutdown_final, creator_shutdown, sc,
|
|
|
|
|
SHUTDOWN_PRI_DEFAULT);
|
|
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
|
|
fail:
|
|
|
|
|
for (i = 0; i < FFB_NREG && sc->sc_reg[i] != NULL; i++)
|
Rototill the sparc64 nexus(4) (actually this brings in the code the
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
2007-03-07 21:13:51 +00:00
|
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
|
|
|
rman_get_rid(sc->sc_reg[i]), sc->sc_reg[i]);
|
2009-04-14 20:51:58 +00:00
|
|
|
return (error);
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* /dev/fb interface
|
|
|
|
|
*/
|
|
|
|
|
static int
|
|
|
|
|
creator_fb_open(struct cdev *dev, int flags, int mode, struct thread *td)
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_fb_close(struct cdev *dev, int flags, int mode, struct thread *td)
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_fb_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int flags,
|
|
|
|
|
struct thread *td)
|
|
|
|
|
{
|
|
|
|
|
struct creator_softc *sc;
|
|
|
|
|
|
|
|
|
|
sc = dev->si_drv1;
|
|
|
|
|
return (creator_ioctl(&sc->sc_va, cmd, data));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
creator_fb_mmap(struct cdev *dev, vm_offset_t offset, vm_paddr_t *paddr,
|
|
|
|
|
int prot)
|
|
|
|
|
{
|
|
|
|
|
struct creator_softc *sc;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NB: This is a special implementation based on the /dev/fb
|
2009-04-28 20:49:47 +00:00
|
|
|
* requirements of the XFree86/X.Org sunffb(4).
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
*/
|
|
|
|
|
sc = dev->si_drv1;
|
|
|
|
|
for (i = 0; i < CREATOR_FB_MAP_SIZE; i++) {
|
|
|
|
|
if (offset >= creator_fb_map[i].virt &&
|
|
|
|
|
offset < creator_fb_map[i].virt + creator_fb_map[i].size) {
|
2009-04-14 20:51:58 +00:00
|
|
|
offset += creator_fb_map[i].phys -
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
creator_fb_map[i].virt;
|
2009-04-28 20:49:47 +00:00
|
|
|
if (offset >= sc->sc_reg_size)
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
return (EINVAL);
|
|
|
|
|
*paddr = sc->sc_bh[0] + offset;
|
|
|
|
|
return (0);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
return (EINVAL);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* internal functions
|
|
|
|
|
*/
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
static void
|
|
|
|
|
creator_cursor_enable(struct creator_softc *sc, int onoff)
|
|
|
|
|
{
|
|
|
|
|
int v;
|
|
|
|
|
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE2, FFB_DAC_CUR_CTRL);
|
|
|
|
|
if (sc->sc_flags & CREATOR_CURINV)
|
|
|
|
|
v = onoff ? FFB_DAC_CUR_CTRL_P0 | FFB_DAC_CUR_CTRL_P1 : 0;
|
|
|
|
|
else
|
|
|
|
|
v = onoff ? 0 : FFB_DAC_CUR_CTRL_P0 | FFB_DAC_CUR_CTRL_P1;
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_VALUE2, v);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
creator_cursor_install(struct creator_softc *sc)
|
|
|
|
|
{
|
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
|
|
creator_cursor_enable(sc, 0);
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE2, FFB_DAC_CUR_COLOR1);
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_VALUE2, 0xffffff);
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_VALUE2, 0x0);
|
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_TYPE2,
|
|
|
|
|
i ? FFB_DAC_CUR_BITMAP_P0 : FFB_DAC_CUR_BITMAP_P1);
|
|
|
|
|
for (j = 0; j < 64; j++) {
|
|
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_VALUE2,
|
2005-07-10 11:16:34 +00:00
|
|
|
*(const uint32_t *)(&creator_mouse_pointer[j][0]));
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
FFB_WRITE(sc, FFB_DAC, FFB_DAC_VALUE2,
|
2005-07-10 11:16:34 +00:00
|
|
|
*(const uint32_t *)(&creator_mouse_pointer[j][4]));
|
o creator(4):
- Use register macros instead of magic values in the code. [1]
- Check the return values of OF_getprop() and other stuff that actually
can fail.
- Let the unimplemented video driver methods return ENODEV rather
than 0 so other code isn't tricked into thinking a certain operation
was successfull. In case of e.g. the video driver creator_ioctl()
this caused vidcontrol(1) to return random garbage information.
Remove the TODO macros in the unimplemented video driver methods
which did a printf("%s: unimplemented\n", __func__). Under certain
circumstances these managed to invoke a printf() when a low-level
console device wasn't attached, yet, causing a Fast Data Access MMU
Miss. These macros were only really usefull for development anyway.
- Set the struct video_adapter and struct video_info va_flags and
vi_flags etc. as appropriate.
- In creator_configure() don't rely on hitting the node which is the
chosen console device first when searching the OFW tree for adapters
compatible with this driver. Instead just check whether the chosen
console device is a viable target for this driver. Targets that are
not the console (including additional cards in multi-head configs)
will be attached through creator_upa_attach(). I think this how the
code in creator_configure() was actually meant to work.
Honour the VIO_PROBE_ONLY flag and don't initialise and register the
console device twice when creator_configure() is called a second time
during sc_probe_unit().
Let creator_configure() return the number of the found adapters,
i.e. 1 in case probing succeeds, as it's expected. The return values
of video adapter configure functions however currently aren't checked
so this doesn't make a difference at the moment.
- In creator_upa_attach() don't rely on probing and attaching the
adapter which is the console first, in case there are multiple
adpaters and one of them is the console this could lead into using
the video adapter unit 0 twice.
- Make the check for DACs with inverted cursor control a bit more
precise and actually honour that information when turning the cursor
on or off. Add a helper function creator_cursor_enable() for this
in order to keep code duplication low. [1]
- Don't bother with faking a hardware cursor in case a device is the
console. Apparently this was meant to start kernel output right after
where the firmware left. In general this isn't worth the fuzz and
also had no real effect as creator_set_mode() did clear the screen
in any case, not just in case a device was not the console.
- Implement creator_fill_rect() and use it to actually blank the
display in creator_blank_display() when the mode is V_DISPLAY_BLANK,
moving blanking the display out of creator_set_mode(). Use it also
to implement creator_set_border() so the border can be re-drawn
when switching to a VTY from X, exiting X, etc. (which leaves us
with a black border most of the time).
- Implement the video driver creator_ioctl(), moving the implementation
of the IOCTL interface from the fbN CDEV version of creator_ioctl()
into the video driver version and use the latter to implement the
former. Use fb_commonioctl() to handle most of the FBIO IOCTLs.
This gives programs like vidcontrol(1) which use the video driver
creator_ioctl() a chance of working.
Implement turning off the cursor via the FBIOSCURSOR IOCTL, which
Xorg uses to in order to inform the OS that it's taking over the
cursor. In creator_putm() check whether the cursor is enabled and
(re-)install it if necessary, moving installing the cursor out of
creator_init() and into a helper function creator_cursor_install().
This fixes the missing mouse pointer when switching to a VTY from X,
exiting X, etc.
- Some clean-up (remove unused/useless code, etc.).
o sparc64/creator/creator_upa.c / sparc64/sparc64/sc_machdep.c:
- Attach syscons(4) as an own pseudo-device on the nexus rather than
directly in creator_upa_attach(), similiar to attaching syscons(4)
as a pseudo-device on isa(4) on other archs. This makes it a whole
lot easier to do the right thing in multi-head configs, especially
with different types of graphics adapters. [2]
- Set SC_AUTODETECT_KBD by default so USB keyboards work out of the
box. [2]
Based on/obtained from: Xorg 'ffb' driver [1]
Based on/obtained from: FreeBSD/powerpc [2]
2005-05-21 20:38:26 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
- Merge sys/sparc64/creator/creator_upa.c into sys/dev/fb/creator.c.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
2007-01-16 21:08:22 +00:00
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
creator_shutdown(void *xsc)
|
|
|
|
|
{
|
|
|
|
|
struct creator_softc *sc = xsc;
|
|
|
|
|
|
|
|
|
|
creator_cursor_enable(sc, 0);
|
|
|
|
|
/*
|
|
|
|
|
* In case this is the console set the cursor of the stdout
|
|
|
|
|
* instance to the start of the last line so OFW output ends
|
|
|
|
|
* up beneath what FreeBSD left on the screen.
|
|
|
|
|
*/
|
|
|
|
|
if (sc->sc_flags & CREATOR_CONSOLE) {
|
|
|
|
|
OF_interpret("stdout @ is my-self 0 to column#", 0);
|
|
|
|
|
OF_interpret("stdout @ is my-self #lines 1 - to line#", 0);
|
|
|
|
|
}
|
|
|
|
|
}
|
