d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cf790dc236
freebsd-skq/sys/arm/ti/ti_i2c.h

132 lines
4.6 KiB
C
Raw Normal View History

Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
/*-
* Copyright (c) 2011
* Ben Gray <ben.r.gray@gmail.com>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _TI_I2C_H_
#define _TI_I2C_H_
/**
* Header file for the OMAP I2C driver.
*
* Simply contains register bit flags.
*/
/*
* OMAP4 I2C Registers, Summary 1
*/
#define I2C_REG_IE 0x84
#define I2C_IE_XDR (1UL << 14) /* Transmit draining interrupt */
#define I2C_IE_RDR (1UL << 13) /* Receive draining interrupt */
#define I2C_IE_AAS (1UL << 9) /* Addressed as Slave interrupt */
#define I2C_IE_BF (1UL << 8) /* Bus Free interrupt */
#define I2C_IE_AERR (1UL << 7) /* Access Error interrupt */
#define I2C_IE_STC (1UL << 6) /* Start Condition interrupt */
#define I2C_IE_GC (1UL << 5) /* General Call interrupt */
#define I2C_IE_XRDY (1UL << 4) /* Transmit Data Ready interrupt */
#define I2C_IE_RRDY (1UL << 3) /* Receive Data Ready interrupt */
#define I2C_IE_ARDY (1UL << 2) /* Register Access Ready interrupt */
#define I2C_IE_NACK (1UL << 1) /* No Acknowledgment interrupt */
#define I2C_IE_AL (1UL << 0) /* Arbitration Lost interrupt */
#define I2C_REG_STAT 0x88
#define I2C_STAT_XDR (1UL << 14)
#define I2C_STAT_RDR (1UL << 13)
#define I2C_STAT_BB (1UL << 12)
#define I2C_STAT_ROVR (1UL << 11)
#define I2C_STAT_XUDF (1UL << 10)
#define I2C_STAT_AAS (1UL << 9)
#define I2C_STAT_BF (1UL << 8)
#define I2C_STAT_AERR (1UL << 7)
#define I2C_STAT_STC (1UL << 6)
#define I2C_STAT_GC (1UL << 5)
#define I2C_STAT_XRDY (1UL << 4)
#define I2C_STAT_RRDY (1UL << 3)
#define I2C_STAT_ARDY (1UL << 2)
#define I2C_STAT_NACK (1UL << 1)
#define I2C_STAT_AL (1UL << 0)
#define I2C_REG_SYSS 0x90
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: . interrupt storm detected on "intr70:"; throttling interrupt source; . Added access serialization on iicbus_transfer(), previously there was no such protection and a new transfer could easily confuse the controller; . Add error checkings (i.e. stop the transfer when a error is detected and do _not_ overwrite the previous error); . On command done interrupt do not assume that the transfer was finished sucessfully as we will receive the command done interrupt even after errors; . Simplify the FIFO handling; . Reset the FIFO between the transfers as the FIFO may contain data from the last (failed) transfer; . Fix the iicbus speed for AM335x, which in turn will make better use of the I2C noise filter (set to one internal clock cycle); . Move the read and write handler to ithread instead of notifying the requesting thread with wakeup(9); . Fix the comments based on OMAP4 TRM. The above changes allows me to read the EDID from my HDMI monitor on BBB with gonzo's patches to support TDA19988 (which does 128 bytes reads) and repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus. Phabric: D465
2014-08-20 17:02:37 +00:00
#define I2C_SYSS_RDONE (1UL << 0)
Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
#define I2C_REG_BUF 0x94
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: . interrupt storm detected on "intr70:"; throttling interrupt source; . Added access serialization on iicbus_transfer(), previously there was no such protection and a new transfer could easily confuse the controller; . Add error checkings (i.e. stop the transfer when a error is detected and do _not_ overwrite the previous error); . On command done interrupt do not assume that the transfer was finished sucessfully as we will receive the command done interrupt even after errors; . Simplify the FIFO handling; . Reset the FIFO between the transfers as the FIFO may contain data from the last (failed) transfer; . Fix the iicbus speed for AM335x, which in turn will make better use of the I2C noise filter (set to one internal clock cycle); . Move the read and write handler to ithread instead of notifying the requesting thread with wakeup(9); . Fix the comments based on OMAP4 TRM. The above changes allows me to read the EDID from my HDMI monitor on BBB with gonzo's patches to support TDA19988 (which does 128 bytes reads) and repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus. Phabric: D465
2014-08-20 17:02:37 +00:00
#define I2C_BUF_RXFIFO_CLR (1UL << 14)
#define I2C_BUF_TXFIFO_CLR (1UL << 6)
#define I2C_BUF_RXTRSH_SHIFT 8
#define I2C_BUF_TRSH_MASK 0x3f
Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
#define I2C_REG_CNT 0x98
#define I2C_REG_DATA 0x9c
#define I2C_REG_CON 0xa4
#define I2C_CON_I2C_EN (1UL << 15)
#define I2C_CON_OPMODE_STD (0UL << 12)
#define I2C_CON_OPMODE_HS (1UL << 12)
#define I2C_CON_OPMODE_SCCB (2UL << 12)
#define I2C_CON_OPMODE_MASK (3UL << 13)
#define I2C_CON_I2C_STB (1UL << 11)
#define I2C_CON_MST (1UL << 10)
#define I2C_CON_TRX (1UL << 9)
#define I2C_CON_XSA (1UL << 8)
#define I2C_CON_XOA0 (1UL << 7)
#define I2C_CON_XOA1 (1UL << 6)
#define I2C_CON_XOA2 (1UL << 5)
#define I2C_CON_XOA3 (1UL << 4)
#define I2C_CON_STP (1UL << 1)
#define I2C_CON_STT (1UL << 0)
#define I2C_REG_OA0 0xa8
#define I2C_REG_SA 0xac
#define I2C_REG_PSC 0xb0
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: . interrupt storm detected on "intr70:"; throttling interrupt source; . Added access serialization on iicbus_transfer(), previously there was no such protection and a new transfer could easily confuse the controller; . Add error checkings (i.e. stop the transfer when a error is detected and do _not_ overwrite the previous error); . On command done interrupt do not assume that the transfer was finished sucessfully as we will receive the command done interrupt even after errors; . Simplify the FIFO handling; . Reset the FIFO between the transfers as the FIFO may contain data from the last (failed) transfer; . Fix the iicbus speed for AM335x, which in turn will make better use of the I2C noise filter (set to one internal clock cycle); . Move the read and write handler to ithread instead of notifying the requesting thread with wakeup(9); . Fix the comments based on OMAP4 TRM. The above changes allows me to read the EDID from my HDMI monitor on BBB with gonzo's patches to support TDA19988 (which does 128 bytes reads) and repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus. Phabric: D465
2014-08-20 17:02:37 +00:00
#define I2C_PSC_MASK 0xff
Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
#define I2C_REG_SCLL 0xb4
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: . interrupt storm detected on "intr70:"; throttling interrupt source; . Added access serialization on iicbus_transfer(), previously there was no such protection and a new transfer could easily confuse the controller; . Add error checkings (i.e. stop the transfer when a error is detected and do _not_ overwrite the previous error); . On command done interrupt do not assume that the transfer was finished sucessfully as we will receive the command done interrupt even after errors; . Simplify the FIFO handling; . Reset the FIFO between the transfers as the FIFO may contain data from the last (failed) transfer; . Fix the iicbus speed for AM335x, which in turn will make better use of the I2C noise filter (set to one internal clock cycle); . Move the read and write handler to ithread instead of notifying the requesting thread with wakeup(9); . Fix the comments based on OMAP4 TRM. The above changes allows me to read the EDID from my HDMI monitor on BBB with gonzo's patches to support TDA19988 (which does 128 bytes reads) and repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus. Phabric: D465
2014-08-20 17:02:37 +00:00
#define I2C_SCLL_MASK 0xff
#define I2C_HSSCLL_SHIFT 8
Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
#define I2C_REG_SCLH 0xb8
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: . interrupt storm detected on "intr70:"; throttling interrupt source; . Added access serialization on iicbus_transfer(), previously there was no such protection and a new transfer could easily confuse the controller; . Add error checkings (i.e. stop the transfer when a error is detected and do _not_ overwrite the previous error); . On command done interrupt do not assume that the transfer was finished sucessfully as we will receive the command done interrupt even after errors; . Simplify the FIFO handling; . Reset the FIFO between the transfers as the FIFO may contain data from the last (failed) transfer; . Fix the iicbus speed for AM335x, which in turn will make better use of the I2C noise filter (set to one internal clock cycle); . Move the read and write handler to ithread instead of notifying the requesting thread with wakeup(9); . Fix the comments based on OMAP4 TRM. The above changes allows me to read the EDID from my HDMI monitor on BBB with gonzo's patches to support TDA19988 (which does 128 bytes reads) and repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus. Phabric: D465
2014-08-20 17:02:37 +00:00
#define I2C_SCLH_MASK 0xff
#define I2C_HSSCLH_SHIFT 8
Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
#define I2C_REG_SYSTEST 0xbc
#define I2C_REG_BUFSTAT 0xc0
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: . interrupt storm detected on "intr70:"; throttling interrupt source; . Added access serialization on iicbus_transfer(), previously there was no such protection and a new transfer could easily confuse the controller; . Add error checkings (i.e. stop the transfer when a error is detected and do _not_ overwrite the previous error); . On command done interrupt do not assume that the transfer was finished sucessfully as we will receive the command done interrupt even after errors; . Simplify the FIFO handling; . Reset the FIFO between the transfers as the FIFO may contain data from the last (failed) transfer; . Fix the iicbus speed for AM335x, which in turn will make better use of the I2C noise filter (set to one internal clock cycle); . Move the read and write handler to ithread instead of notifying the requesting thread with wakeup(9); . Fix the comments based on OMAP4 TRM. The above changes allows me to read the EDID from my HDMI monitor on BBB with gonzo's patches to support TDA19988 (which does 128 bytes reads) and repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus. Phabric: D465
2014-08-20 17:02:37 +00:00
#define I2C_BUFSTAT_FIFODEPTH_MASK 0x3
#define I2C_BUFSTAT_FIFODEPTH_SHIFT 14
Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
#define I2C_REG_OA1 0xc4
#define I2C_REG_OA2 0xc8
#define I2C_REG_OA3 0xcc
#define I2C_REG_ACTOA 0xd0
#define I2C_REG_SBLOCK 0xd4
/*
* OMAP4 I2C Registers, Summary 2
*/
#define I2C_REG_REVNB_LO 0x00
#define I2C_REG_REVNB_HI 0x04
#define I2C_REG_SYSC 0x10
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: . interrupt storm detected on "intr70:"; throttling interrupt source; . Added access serialization on iicbus_transfer(), previously there was no such protection and a new transfer could easily confuse the controller; . Add error checkings (i.e. stop the transfer when a error is detected and do _not_ overwrite the previous error); . On command done interrupt do not assume that the transfer was finished sucessfully as we will receive the command done interrupt even after errors; . Simplify the FIFO handling; . Reset the FIFO between the transfers as the FIFO may contain data from the last (failed) transfer; . Fix the iicbus speed for AM335x, which in turn will make better use of the I2C noise filter (set to one internal clock cycle); . Move the read and write handler to ithread instead of notifying the requesting thread with wakeup(9); . Fix the comments based on OMAP4 TRM. The above changes allows me to read the EDID from my HDMI monitor on BBB with gonzo's patches to support TDA19988 (which does 128 bytes reads) and repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus. Phabric: D465
2014-08-20 17:02:37 +00:00
#define I2C_REG_SYSC_SRST (1UL << 1)
#define I2C_REG_STATUS_RAW 0x24
#define I2C_REG_STATUS 0x28
Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
#define I2C_REG_IRQENABLE_SET 0x2C
#define I2C_REG_IRQENABLE_CLR 0x30
Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: . interrupt storm detected on "intr70:"; throttling interrupt source; . Added access serialization on iicbus_transfer(), previously there was no such protection and a new transfer could easily confuse the controller; . Add error checkings (i.e. stop the transfer when a error is detected and do _not_ overwrite the previous error); . On command done interrupt do not assume that the transfer was finished sucessfully as we will receive the command done interrupt even after errors; . Simplify the FIFO handling; . Reset the FIFO between the transfers as the FIFO may contain data from the last (failed) transfer; . Fix the iicbus speed for AM335x, which in turn will make better use of the I2C noise filter (set to one internal clock cycle); . Move the read and write handler to ithread instead of notifying the requesting thread with wakeup(9); . Fix the comments based on OMAP4 TRM. The above changes allows me to read the EDID from my HDMI monitor on BBB with gonzo's patches to support TDA19988 (which does 128 bytes reads) and repeatedly scan the iicbus (with a modified i2c(8)) without lock up the bus. Phabric: D465
2014-08-20 17:02:37 +00:00
#define I2C_CLK 96000000UL /* 96MHz */
#define I2C_ICLK 12000000UL /* 12MHz */
Merging of projects/armv6, part 10 - Support for Texas Instruments SoCs: - AM335x - OMAP4 - Kernel configs, DTS for Beaglebone and Pandaboard Submitted by: Ben Gray, Damjan Marion
2012-08-15 06:31:32 +00:00
#endif /* _TI_I2C_H_ */
Reference in New Issue Copy Permalink