d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d01788d7e5
freebsd-skq/sys/arm/at91/uart_bus_at91usart.c

112 lines
3.2 KiB
C
Raw Normal View History

Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
/*-
* Copyright (c) 2005 Olivier Houchard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
Tweak the disclaimer section of the license to match COPYRIGHT, for better or worse. Ok'd by folks that have additional copyrights to the files in cases where there's joint authorship.
2008-11-25 00:13:26 +00:00
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
*/
#include "opt_uart.h"
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_bus.h>
#include <dev/uart/uart_cpu.h>
Migrate towards using at91_master_clock. Initialize the clocks for the serial port class when we set the devclass since it is now no-longer a compile time constant. Eliminate the pci include, as it isn't relevant or necessary.
2009-01-22 21:56:41 +00:00
#include <arm/at91/at91var.h>
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
#include "uart_if.h"
Move the uart_class definitions and fdt compat data into the individual uart implementations, and export them using the new linker-set mechanism. Differential Revision: https://reviews.freebsd.org/D1993 Submitted by: Michal Meloun
2015-03-07 15:24:15 +00:00
extern struct uart_class at91_usart_class;
There's nothing AT91RM9200 specific about this file at all.
2012-07-10 01:13:00 +00:00
static int usart_at91_probe(device_t dev);
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
There's nothing AT91RM9200 specific about this file at all.
2012-07-10 01:13:00 +00:00
static device_method_t usart_at91_methods[] = {
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
/* Device interface */
There's nothing AT91RM9200 specific about this file at all.
2012-07-10 01:13:00 +00:00
DEVMETHOD(device_probe, usart_at91_probe),
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
DEVMETHOD(device_attach, uart_bus_attach),
DEVMETHOD(device_detach, uart_bus_detach),
{ 0, 0 }
};
There's nothing AT91RM9200 specific about this file at all.
2012-07-10 01:13:00 +00:00
static driver_t usart_at91_driver = {
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
uart_driver_name,
There's nothing AT91RM9200 specific about this file at all.
2012-07-10 01:13:00 +00:00
usart_at91_methods,
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
sizeof(struct uart_softc),
};
extern SLIST_HEAD(uart_devinfo_list, uart_devinfo) uart_sysdevs;
static int
There's nothing AT91RM9200 specific about this file at all.
2012-07-10 01:13:00 +00:00
usart_at91_probe(device_t dev)
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
{
struct uart_softc *sc;
sc = device_get_softc(dev);
switch (device_get_unit(dev))
{
case 0:
device_set_desc(dev, "DBGU");
/*
* Setting sc_sysdev makes this device a 'system device' and
* indirectly makes it the system console.
*/
sc->sc_sysdev = SLIST_FIRST(&uart_sysdevs);
bcopy(&sc->sc_sysdev->bas, &sc->sc_bas, sizeof(sc->sc_bas));
break;
case 1:
device_set_desc(dev, "USART0");
break;
case 2:
device_set_desc(dev, "USART1");
break;
case 3:
device_set_desc(dev, "USART2");
break;
case 4:
device_set_desc(dev, "USART3");
break;
Some models have 6 USARTS + DBGU. Set a consistent name.
2012-07-26 05:46:56 +00:00
case 5:
device_set_desc(dev, "USART4");
break;
case 6:
device_set_desc(dev, "USART5");
break;
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
}
sc->sc_class = &at91_usart_class;
Migrate towards using at91_master_clock. Initialize the clocks for the serial port class when we set the devclass since it is now no-longer a compile time constant. Eliminate the pci include, as it isn't relevant or necessary.
2009-01-22 21:56:41 +00:00
if (sc->sc_class->uc_rclk == 0)
sc->sc_class->uc_rclk = at91_master_clock;
Resurrect Skyeye support : Add a new option, SKYEYE_WORKAROUNDS, which as the name suggests adds workarounds for things skyeye doesn't simulate. Specifically : - Use USART0 instead of DBGU as the console, make it not use DMA, and manually provoke an interrupt when we're done in the transmit function. - Skyeye maintains an internal counter for clock, but apparently there's no way to access it, so hack the timecounter code to return a value which is increased at every clock interrupts. This is gross, but I didn't find a better way to implement timecounters without hacking Skyeye to get the counter value. - Force the write-back of PTEs once we're done writing them, even if they are supposed to be write-through. I don't know why I have to do that.
2006-05-13 23:41:16 +00:00
return (uart_bus_probe(dev, 0, 0, 0, device_get_unit(dev)));
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
}
There's nothing AT91RM9200 specific about this file at all.
2012-07-10 01:13:00 +00:00
DRIVER_MODULE(uart, atmelarm, usart_at91_driver, uart_devclass, 0, 0);
Reference in New Issue Copy Permalink