d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d2a34caedb
freebsd-skq/sys/conf/kmod.mk

349 lines
8.6 KiB
Makefile
Raw Normal View History

A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
# From: @(#)bsd.prog.mk 5.26 (Berkeley) 6/25/91
$Id$ -> $FreeBSD$
1999-08-28 00:22:10 +00:00
# $FreeBSD$
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# The include file <bsd.kmod.mk> handles installing Kernel Loadable Device
# drivers (KLD's).
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
#
# +++ variables +++
#
# CLEANFILES Additional files to remove for the clean and cleandir targets.
#
# DISTRIBUTION Name of distribution. [bin]
#
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# KMOD The name of the kernel module to build.
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
The kernel is now known as `kernel.ko' and it and its matching modules live in ``/boot/kernel/''.
2000-09-05 22:37:46 +00:00
# KMODDIR Base path for kernel modules (see kld(4)). [/boot/kernel]
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# KMODOWN KLD owner. [${BINOWN}]
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# KMODGRP KLD group. [${BINGRP}]
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# KMODMODE KLD mode. [${BINMODE}]
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# LINKS The list of KLD links; should be full pathnames, the
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
# linked-to file coming first, followed by the linked
# file. The files are hard-linked. For example, to link
Clean out most of the LKM stuff, the build support left a little while ago.
1999-04-20 14:33:24 +00:00
# /modules/master and /modules/meister, use:
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
Clean out most of the LKM stuff, the build support left a little while ago.
1999-04-20 14:33:24 +00:00
# LINKS= /modules/master /modules/meister
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# KMODLOAD Command to load a kernel module [/sbin/kldload]
add variables MODLOAD and MODUNLOAD for modlad/modunload commands
1996-10-06 22:10:35 +00:00
#
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# KMODUNLOAD Command to unload a kernel module [/sbin/kldunload]
add variables MODLOAD and MODUNLOAD for modlad/modunload commands
1996-10-06 22:10:35 +00:00
#
kobjify. this gives us several benefits, including: * easier extensibility- new optional methods can be added to ac97/mixer/channel classes without having to fixup every driver. * forward compatibility for drivers, provided no new mandatory methods are added.
2000-12-18 01:36:41 +00:00
# PROG The name of the kernel module to build.
add variables MODLOAD and MODUNLOAD for modlad/modunload commands
1996-10-06 22:10:35 +00:00
# If not supplied, ${KMOD}.o is used.
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
kobjify. this gives us several benefits, including: * easier extensibility- new optional methods can be added to ac97/mixer/channel classes without having to fixup every driver. * forward compatibility for drivers, provided no new mandatory methods are added.
2000-12-18 01:36:41 +00:00
# SRCS List of source files
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
# SUBDIR A list of subdirectories that should be built as well.
# Each of the targets will execute the same target in the
# subdirectories.
#
Removed all traces of LN_FLAGS. It was only used to produce a link /usr/sbin/sysctl -> ${DESTDIR}/sbin/sysctl in some versions of 2.2, and this link was broken if DESTDIR was set. Added a SYMLINKS macro. This works the same as LINKS, except it creates symlinks and the linked-to pathname may be relative. This is more flexible than LN_FLAGS, since it supports installing symlinks independently of hard links. Use `ln -f[s] ...' instead of `rm -f ...; ln [-s] ...' for LINKS and SYMLINKS. This is equivalent if the target is neither a directory nor a symlink to a directory. PR: 8279
1999-03-23 03:06:25 +00:00
# SYMLINKS Same as LINKS, except it creates symlinks and the
# linked-to pathname may be relative.
#
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
# DESTDIR, DISTDIR are set by other Makefiles (e.g. bsd.own.mk)
#
Allow the calling Makefile to specify a list of device interfaces instead of relying on the default list provided here.
2000-04-05 10:13:05 +00:00
# MFILES Optionally a list of interfaces used by the module.
# This file contains a default list of interfaces.
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
Eliminate the use of commons in the kernel and modules, simplifying the module linking process and eliminating the risks associated with doubly-defined variables. Cases where commons were legitimately used (detection of compiled-in subsystems) have been converted to use sysinits, and any new code should use this or an equivalent practice as a matter of course. Modules can override this behaviour by substituting -fno-common out of ${CFLAGS} in cases where commons are necessary (eg. third-party object modules). Commons will be resolved and allocated space when the kld is linked as part of the module build process, so they will not pose a risk to the kernel or other modules. Provide a mechanism for controlling the export of symbols from the module namespace. The EXPORT_SYMS variable may be set in the Makefile to NO (export no symbols), a list of symbols to export, or the name of a file containing a newline-seperated list of symbols to be exported. Non-exported symbols are converted to local symbols. If EXPORT_SYMS is not set, all global symbols are currently exported. This behaviour is expected to change (to exporting no symbols) once modules have been converted. Reviewed by: peter (in principle) Obtained from: green (kmod_syms.awk)
2002-01-10 03:52:01 +00:00
# EXPORT_SYMS A list of symbols that should be exported from the module,
Reverse the sense of EXPORT_SYMS. If EXPORT_SYMS is not defined, no symbols are exported from the module. This is the typical configuration for most device drivers and standalone modules; only infrastructure modules or those with special requirements typically need to export symbols. Don't print the objcopy commands as they are run when converting symbols; they're bulky and annoying in many cases.
2002-01-11 01:11:44 +00:00
# or the name of a file containing a list of symbols, or YES
# to export all symbols. If not defined, no symbols are
Eliminate the use of commons in the kernel and modules, simplifying the module linking process and eliminating the risks associated with doubly-defined variables. Cases where commons were legitimately used (detection of compiled-in subsystems) have been converted to use sysinits, and any new code should use this or an equivalent practice as a matter of course. Modules can override this behaviour by substituting -fno-common out of ${CFLAGS} in cases where commons are necessary (eg. third-party object modules). Commons will be resolved and allocated space when the kld is linked as part of the module build process, so they will not pose a risk to the kernel or other modules. Provide a mechanism for controlling the export of symbols from the module namespace. The EXPORT_SYMS variable may be set in the Makefile to NO (export no symbols), a list of symbols to export, or the name of a file containing a newline-seperated list of symbols to be exported. Non-exported symbols are converted to local symbols. If EXPORT_SYMS is not set, all global symbols are currently exported. This behaviour is expected to change (to exporting no symbols) once modules have been converted. Reviewed by: peter (in principle) Obtained from: green (kmod_syms.awk)
2002-01-10 03:52:01 +00:00
# exported.
#
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
# +++ targets +++
#
# distribute:
# This is a variant of install, which will
# put the stuff into the right "distribution".
#
# install:
Drop <bsd.man.mk> support from <bsd.kmod.mk>. Not objected to by: -current
2002-01-11 15:49:02 +00:00
# install the kernel module; if the Makefile
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
# does not itself define the target install, the targets
# beforeinstall and afterinstall may also be used to cause
# actions immediately before and after the install target
# is executed.
#
kobjify. this gives us several benefits, including: * easier extensibility- new optional methods can be added to ac97/mixer/channel classes without having to fixup every driver. * forward compatibility for drivers, provided no new mandatory methods are added.
2000-12-18 01:36:41 +00:00
# load:
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# Load KLD.
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
# unload:
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# Unload KLD.
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
# bsd.obj.mk: clean, cleandir and obj
Removed default tags target. PROG is always defined here, so ifdefing it was bogus, and without the ifdef the default is identical to the central one in bsd.dep.mk.
1998-02-20 15:52:49 +00:00
# bsd.dep.mk: cleandepend, depend and tags
Add some comments for variables and targets.
1996-05-25 23:09:49 +00:00
#
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
Use vnode_if.awk rather than vnode_if.pl
2002-03-01 01:21:29 +00:00
AWK?= awk
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
KMODLOAD?= /sbin/kldload
KMODUNLOAD?= /sbin/kldunload
When building a debugging kernel with modules, build modules with debugging support as well. Debugging module support is handled identically to kernel debugging support, right down to poor choice of make variable names.
2001-08-02 09:22:18 +00:00
OBJCOPY?= objcopy
add variables MODLOAD and MODUNLOAD for modlad/modunload commands
1996-10-06 22:10:35 +00:00
Catch any stray KMODDEPS entries to make sure they do not keep turning up.
2002-05-01 01:32:28 +00:00
.if defined(KMODDEPS)
.error "Do not use KMODDEPS on 5.0+, use MODULE_VERSION/MODULE_DEPEND"
.endif
Use standard bsd.init.mk prologue.
2002-04-22 15:47:11 +00:00
.include <bsd.init.mk>
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
.SUFFIXES: .out .o .c .cc .cxx .C .y .l .s .S
Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" is an application space macro and the applications are supposed to be free to use it as they please (but cannot). This is consistant with the other BSD's who made this change quite some time ago. More commits to come.
1999-12-29 05:07:58 +00:00
CFLAGS+= ${COPTS} -D_KERNEL ${CWARNFLAGS}
Define KLD_MODULE if building a KLD module. Forgot to mention that the previous commit was Submitted by: Doug Rabson <dfr@freebsd.org>
1998-10-02 05:08:09 +00:00
CFLAGS+= -DKLD_MODULE
Generate symlinks to the "sys" and <machine> directories and put them in the include path. This fixes recent breakage of the syscons LKMs and general brokenness of the include paths (headers under /usr/include were used in many cases).
1998-01-26 20:36:38 +00:00
Restrict the include search path using -nostdinc -I- in $(CFLAGS} as in kernel Makefiles. Nothing in /usr/include is used (provided relative paths for sys/* and <machine> can be found), so there is no need for the -I/usr/include kludge as in kernel Makefiles.
1998-02-01 17:19:54 +00:00
# Don't use any standard or source-relative include directories.
# Since -nostdinc will annull any previous -I paths, we repeat all
# such paths after -nostdinc. It doesn't seem to be possible to
# add to the front of `make' variable.
_ICFLAGS:= ${CFLAGS:M-I*}
Add a hook for doing #include magic (for src/tools/tools/kerninclude).
2000-10-29 09:47:50 +00:00
CFLAGS+= -nostdinc -I- ${INCLMAGIC} ${_ICFLAGS}
Restrict the include search path using -nostdinc -I- in $(CFLAGS} as in kernel Makefiles. Nothing in /usr/include is used (provided relative paths for sys/* and <machine> can be found), so there is no need for the -I/usr/include kludge as in kernel Makefiles.
1998-02-01 17:19:54 +00:00
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
# Add -I paths for system headers. Individual KLD makefiles don't
Restrict the include search path using -nostdinc -I- in $(CFLAGS} as in kernel Makefiles. Nothing in /usr/include is used (provided relative paths for sys/* and <machine> can be found), so there is no need for the -I/usr/include kludge as in kernel Makefiles.
1998-02-01 17:19:54 +00:00
# need any -I paths for this. Similar defaults for .PATH can't be
# set because there are no standard paths for non-headers.
Next-phase PCI system update; move PCI core code to sys/dev and update header include path to include sys/dev to avoid massive #include updates.
2000-12-08 22:26:48 +00:00
CFLAGS+= -I. -I@ -I@/dev
Generate symlinks to the "sys" and <machine> directories and put them in the include path. This fixes recent breakage of the syscons LKMs and general brokenness of the include paths (headers under /usr/include were used in many cases).
1998-01-26 20:36:38 +00:00
Add "-I@/../include" and/or "-I${DESTDIR}/usr/include" to CFLAGS, essentially as in kernel makefiles, so that module sources can include <stddef.h> and other standard headers. Only add the second path when the first path can't be found, instead of when DESTDIR is defined. Adding it used to be just an obfuscation. Use "${.OBJDIR}" instyead of "." in -I paths. Using "${.OBJDIR}" just gave more verbose command lines and depend files.
2000-01-08 18:48:57 +00:00
# Add a -I path to standard headers like <stddef.h>. Use a relative
# path to src/include if possible. If the @ symlink hasn't been built
# yet, then we can't tell if the relative path exists. Add both the
# potential relative path and an absolute path in that case.
.if exists(@)
.if exists(@/../include)
CFLAGS+= -I@/../include
.else
Add "-I${DESTDIR}/usr/include" to CFLAGS if DESTDIR is defined, just like bsd.lib.mk and bsd.prog.mk. It doesn't add it to CXXINCLUDES, I don't think anybody has written a kernel module with C++. (Not that I think DavidG will allow it anyway. :) Reviewed by: bde
1997-06-18 03:10:31 +00:00
CFLAGS+= -I${DESTDIR}/usr/include
.endif
Add "-I@/../include" and/or "-I${DESTDIR}/usr/include" to CFLAGS, essentially as in kernel makefiles, so that module sources can include <stddef.h> and other standard headers. Only add the second path when the first path can't be found, instead of when DESTDIR is defined. Adding it used to be just an obfuscation. Use "${.OBJDIR}" instyead of "." in -I paths. Using "${.OBJDIR}" just gave more verbose command lines and depend files.
2000-01-08 18:48:57 +00:00
.else # !@
CFLAGS+= -I@/../include -I${DESTDIR}/usr/include
.endif # @
Pick up CWARNFLAGS from /etc/make.conf if defined.
1996-04-03 12:08:52 +00:00
Eliminate the use of commons in the kernel and modules, simplifying the module linking process and eliminating the risks associated with doubly-defined variables. Cases where commons were legitimately used (detection of compiled-in subsystems) have been converted to use sysinits, and any new code should use this or an equivalent practice as a matter of course. Modules can override this behaviour by substituting -fno-common out of ${CFLAGS} in cases where commons are necessary (eg. third-party object modules). Commons will be resolved and allocated space when the kld is linked as part of the module build process, so they will not pose a risk to the kernel or other modules. Provide a mechanism for controlling the export of symbols from the module namespace. The EXPORT_SYMS variable may be set in the Makefile to NO (export no symbols), a list of symbols to export, or the name of a file containing a newline-seperated list of symbols to be exported. Non-exported symbols are converted to local symbols. If EXPORT_SYMS is not set, all global symbols are currently exported. This behaviour is expected to change (to exporting no symbols) once modules have been converted. Reviewed by: peter (in principle) Obtained from: green (kmod_syms.awk)
2002-01-10 03:52:01 +00:00
# Disallow common variables, and if we end up with commons from
# somewhere unexpected, allocate storage for them in the module itself.
CFLAGS+= -fno-common
LDFLAGS+= -d -warn-common
Add ${DEBUG_FLAGS} to CFLAGS in bsd.kmod.mk, not in scattered module makefiles. Bad examples in fxp/Makefile keep getting copied to new makefiles.
2000-01-28 11:26:46 +00:00
CFLAGS+= ${DEBUG_FLAGS}
Clean out most of the LKM stuff, the build support left a little while ago.
1999-04-20 14:33:24 +00:00
.if ${OBJFORMAT} == elf
Support encapsulating ELF linker sets for KLD modules via gensetdefs. Support name based dependencies at build time. This is a hack. These only affect KLD modules.
1998-10-14 04:04:22 +00:00
CLEANFILES+= setdef0.c setdef1.c setdefs.h
CLEANFILES+= setdef0.o setdef1.o
.endif
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
OBJS+= ${SRCS:N*.h:R:S/$/.o/g}
.if !defined(PROG)
Changes to support building of KLD modules. This includes the possibly to be removed KMODDEPS define.
1998-10-02 04:51:10 +00:00
PROG= ${KMOD}.ko
.endif
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
When building a debugging kernel with modules, build modules with debugging support as well. Debugging module support is handled identically to kernel debugging support, right down to poor choice of make variable names.
2001-08-02 09:22:18 +00:00
.if !defined(DEBUG)
FULLPROG= ${PROG}
.else
FULLPROG= ${PROG}.debug
${PROG}: ${FULLPROG}
${OBJCOPY} --strip-debug ${FULLPROG} ${PROG}
.endif
${FULLPROG}: ${KMOD}.kld
Remove KMODDEPS support. All our existing dependencies are specified via the MODULE_VERSION() and MODULE_DEPEND() macros that both the loader and kld system know how to deal with. The old DT_NEEDED tag is still supported by the loader (and will remain supported for a while) - but the kernel side presently doesn't know how to deal with DT_NEEDED.
2000-05-01 18:06:49 +00:00
${LD} -Bshareable ${LDFLAGS} -o ${.TARGET} ${KMOD}.kld
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
Reverse the sense of EXPORT_SYMS. If EXPORT_SYMS is not defined, no symbols are exported from the module. This is the typical configuration for most device drivers and standalone modules; only infrastructure modules or those with special requirements typically need to export symbols. Don't print the objcopy commands as they are run when converting symbols; they're bulky and annoying in many cases.
2002-01-11 01:11:44 +00:00
EXPORT_SYMS?= NO
.if ${EXPORT_SYMS} != YES
Eliminate the use of commons in the kernel and modules, simplifying the module linking process and eliminating the risks associated with doubly-defined variables. Cases where commons were legitimately used (detection of compiled-in subsystems) have been converted to use sysinits, and any new code should use this or an equivalent practice as a matter of course. Modules can override this behaviour by substituting -fno-common out of ${CFLAGS} in cases where commons are necessary (eg. third-party object modules). Commons will be resolved and allocated space when the kld is linked as part of the module build process, so they will not pose a risk to the kernel or other modules. Provide a mechanism for controlling the export of symbols from the module namespace. The EXPORT_SYMS variable may be set in the Makefile to NO (export no symbols), a list of symbols to export, or the name of a file containing a newline-seperated list of symbols to be exported. Non-exported symbols are converted to local symbols. If EXPORT_SYMS is not set, all global symbols are currently exported. This behaviour is expected to change (to exporting no symbols) once modules have been converted. Reviewed by: peter (in principle) Obtained from: green (kmod_syms.awk)
2002-01-10 03:52:01 +00:00
CLEANFILES+= ${.OBJDIR}/export_syms
.endif
Remove KMODDEPS support. All our existing dependencies are specified via the MODULE_VERSION() and MODULE_DEPEND() macros that both the loader and kld system know how to deal with. The old DT_NEEDED tag is still supported by the loader (and will remain supported for a while) - but the kernel side presently doesn't know how to deal with DT_NEEDED.
2000-05-01 18:06:49 +00:00
${KMOD}.kld: ${OBJS}
Eliminate the use of commons in the kernel and modules, simplifying the module linking process and eliminating the risks associated with doubly-defined variables. Cases where commons were legitimately used (detection of compiled-in subsystems) have been converted to use sysinits, and any new code should use this or an equivalent practice as a matter of course. Modules can override this behaviour by substituting -fno-common out of ${CFLAGS} in cases where commons are necessary (eg. third-party object modules). Commons will be resolved and allocated space when the kld is linked as part of the module build process, so they will not pose a risk to the kernel or other modules. Provide a mechanism for controlling the export of symbols from the module namespace. The EXPORT_SYMS variable may be set in the Makefile to NO (export no symbols), a list of symbols to export, or the name of a file containing a newline-seperated list of symbols to be exported. Non-exported symbols are converted to local symbols. If EXPORT_SYMS is not set, all global symbols are currently exported. This behaviour is expected to change (to exporting no symbols) once modules have been converted. Reviewed by: peter (in principle) Obtained from: green (kmod_syms.awk)
2002-01-10 03:52:01 +00:00
${LD} ${LDFLAGS} -r -d -o ${.TARGET} ${OBJS}
.if defined(EXPORT_SYMS)
Reverse the sense of EXPORT_SYMS. If EXPORT_SYMS is not defined, no symbols are exported from the module. This is the typical configuration for most device drivers and standalone modules; only infrastructure modules or those with special requirements typically need to export symbols. Don't print the objcopy commands as they are run when converting symbols; they're bulky and annoying in many cases.
2002-01-11 01:11:44 +00:00
.if ${EXPORT_SYMS} != YES
Eliminate the use of commons in the kernel and modules, simplifying the module linking process and eliminating the risks associated with doubly-defined variables. Cases where commons were legitimately used (detection of compiled-in subsystems) have been converted to use sysinits, and any new code should use this or an equivalent practice as a matter of course. Modules can override this behaviour by substituting -fno-common out of ${CFLAGS} in cases where commons are necessary (eg. third-party object modules). Commons will be resolved and allocated space when the kld is linked as part of the module build process, so they will not pose a risk to the kernel or other modules. Provide a mechanism for controlling the export of symbols from the module namespace. The EXPORT_SYMS variable may be set in the Makefile to NO (export no symbols), a list of symbols to export, or the name of a file containing a newline-seperated list of symbols to be exported. Non-exported symbols are converted to local symbols. If EXPORT_SYMS is not set, all global symbols are currently exported. This behaviour is expected to change (to exporting no symbols) once modules have been converted. Reviewed by: peter (in principle) Obtained from: green (kmod_syms.awk)
2002-01-10 03:52:01 +00:00
.if ${EXPORT_SYMS} == NO
touch ${.OBJDIR}/export_syms
.elif !exists(${.CURDIR}/${EXPORT_SYMS})
echo ${EXPORT_SYMS} > ${.OBJDIR}/export_syms
.else
grep -v '^#' < ${EXPORT_SYMS} > ${.OBJDIR}/export_syms
.endif
awk -f ${SYSDIR}/conf/kmod_syms.awk ${.TARGET} \
${.OBJDIR}/export_syms | \
Reverse the sense of EXPORT_SYMS. If EXPORT_SYMS is not defined, no symbols are exported from the module. This is the typical configuration for most device drivers and standalone modules; only infrastructure modules or those with special requirements typically need to export symbols. Don't print the objcopy commands as they are run when converting symbols; they're bulky and annoying in many cases.
2002-01-11 01:11:44 +00:00
xargs -J% ${OBJCOPY} % ${.TARGET}
.endif
Eliminate the use of commons in the kernel and modules, simplifying the module linking process and eliminating the risks associated with doubly-defined variables. Cases where commons were legitimately used (detection of compiled-in subsystems) have been converted to use sysinits, and any new code should use this or an equivalent practice as a matter of course. Modules can override this behaviour by substituting -fno-common out of ${CFLAGS} in cases where commons are necessary (eg. third-party object modules). Commons will be resolved and allocated space when the kld is linked as part of the module build process, so they will not pose a risk to the kernel or other modules. Provide a mechanism for controlling the export of symbols from the module namespace. The EXPORT_SYMS variable may be set in the Makefile to NO (export no symbols), a list of symbols to export, or the name of a file containing a newline-seperated list of symbols to be exported. Non-exported symbols are converted to local symbols. If EXPORT_SYMS is not set, all global symbols are currently exported. This behaviour is expected to change (to exporting no symbols) once modules have been converted. Reviewed by: peter (in principle) Obtained from: green (kmod_syms.awk)
2002-01-10 03:52:01 +00:00
.endif
Generate symlinks to the "sys" and <machine> directories and put them in the include path. This fixes recent breakage of the syscons LKMs and general brokenness of the include paths (headers under /usr/include were used in many cases).
1998-01-26 20:36:38 +00:00
_ILINKS=@ machine
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
Merge bsd.obj.mk's version of the _SUBDIR target with bsd.subdir.mk. Ensure all standard targets honor SUBDIR. Now `make obj' descends into SUBDIRs even if NOOBJ is set (some descendants may still need an object directory, but we do not have such precedents). Now `make install' in non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install' in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong order anyway. Fixed `distribute' targets (except for the bsd.subdir.mk version) so that they do not depend on _SUBDIR; `distribute' calls `install' which already depends on _SUBDIR. De-standardize `maninstall', otherwise manpages would be installed twice. (To be revised later.)
2002-04-23 09:03:56 +00:00
all: objwarn ${PROG}
Generate symlinks to the "sys" and <machine> directories and put them in the include path. This fixes recent breakage of the syscons LKMs and general brokenness of the include paths (headers under /usr/include were used in many cases).
1998-01-26 20:36:38 +00:00
Move beforedepend: outside of the loop. # Note: we should remove the rm kludge soon. It fails in many cases. Submitted by: bde
2001-03-05 06:19:29 +00:00
beforedepend: ${_ILINKS}
@rm -f .depend
If the symbolic links @ or machine exist, do not depend on them. This fixes the problem where if src/sys or src/sys/$MACHINE_ARCH/include changed at all, all the modules would be rebuilt. Reviewed by: bde
2001-02-23 04:49:31 +00:00
# Ensure that the links exist without depending on it when it exists which
# causes all the modules to be rebuilt when the directory pointed to changes.
.for _link in ${_ILINKS}
.if !exists(${.OBJDIR}/${_link})
${OBJS}: ${_link}
.endif
.endfor
Generate symlinks to the "sys" and <machine> directories and put them in the include path. This fixes recent breakage of the syscons LKMs and general brokenness of the include paths (headers under /usr/include were used in many cases).
1998-01-26 20:36:38 +00:00
Add support for compiling kernel modules outside of the tree. If you do not have the kernel you wish to compile against in either /usr/src/sys or /sys, then you will need to set SYSDIR to point to the sys directory of the source tree that contians the source. Also, minor tweaks to the load/unload targets from Bruce. I've had this through several make worlds, as well as using it on a daily basis for the past couple of weeks to build modules needed for testing at Timing Solutions. Reviewed and revised by: bde Work sponsored by: Timing Solutions
2000-04-08 17:20:00 +00:00
# Search for kernel source tree in standard places.
.for _dir in ${.CURDIR}/../.. ${.CURDIR}/../../.. /sys /usr/src/sys
.if !defined(SYSDIR) && exists(${_dir}/kern/)
SYSDIR= ${_dir}
.endif
.endfor
Do not check for existence of ${_dir}/kern/ , because for modules that set .PATH to ${.CURDIR}/[...]/kern , the "exists" expression will fail for the form exists(${.CURDIR}/[...]/kern/). This appears to be happening because make is searching for the argument to "exists" by using .PATH rather than a relative search, because .PATH and the argument match at the beginning. Additionally, make appears to consider a path that starts with ${.CURDIR} as relative, even though it expands to an absolute path. The reason that most people aren't seeing this problem is that the absolute paths of /usr/src/sys and /sys are also searched, so as long as the kernel source can be found in at least one of those places, no problems surface. This problem was inadvertently introduced on 1 December 2000, with the addition of the sysvipc modules.
2000-12-08 20:36:32 +00:00
.if !defined(SYSDIR) || !exists(${SYSDIR}/kern)
Add support for compiling kernel modules outside of the tree. If you do not have the kernel you wish to compile against in either /usr/src/sys or /sys, then you will need to set SYSDIR to point to the sys directory of the source tree that contians the source. Also, minor tweaks to the load/unload targets from Bruce. I've had this through several make worlds, as well as using it on a daily basis for the past couple of weeks to build modules needed for testing at Timing Solutions. Reviewed and revised by: bde Work sponsored by: Timing Solutions
2000-04-08 17:20:00 +00:00
.error "can't find kernel source tree"
.endif
Update the kld glue Pre-Approved by: jkh
1998-10-16 03:32:03 +00:00
${_ILINKS}:
Add support for compiling kernel modules outside of the tree. If you do not have the kernel you wish to compile against in either /usr/src/sys or /sys, then you will need to set SYSDIR to point to the sys directory of the source tree that contians the source. Also, minor tweaks to the load/unload targets from Bruce. I've had this through several make worlds, as well as using it on a daily basis for the past couple of weeks to build modules needed for testing at Timing Solutions. Reviewed and revised by: bde Work sponsored by: Timing Solutions
2000-04-08 17:20:00 +00:00
@case ${.TARGET} in \
machine) \
path=${SYSDIR}/${MACHINE_ARCH}/include ;; \
@) \
path=${SYSDIR} ;; \
esac ; \
Update the kld glue Pre-Approved by: jkh
1998-10-16 03:32:03 +00:00
path=`(cd $$path && /bin/pwd)` ; \
${ECHO} ${.TARGET} "->" $$path ; \
ln -s $$path ${.TARGET}
Generate symlinks to the "sys" and <machine> directories and put them in the include path. This fixes recent breakage of the syscons LKMs and general brokenness of the include paths (headers under /usr/include were used in many cases).
1998-01-26 20:36:38 +00:00
When building a debugging kernel with modules, build modules with debugging support as well. Debugging module support is handled identically to kernel debugging support, right down to poor choice of make variable names.
2001-08-02 09:22:18 +00:00
CLEANFILES+= ${PROG} ${FULLPROG} ${KMOD}.kld ${OBJS} ${_ILINKS} symb.tmp tmp.o
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
.if !target(install)
.if !target(beforeinstall)
beforeinstall:
.endif
.if !target(afterinstall)
afterinstall:
.endif
Don't install KO's with the "schg" flag. We are way too inconsistent with our setting of the "schg" flag, and in our default install, it doesn't really offer any additional security. Reviewed by: arch@
2001-04-25 20:56:15 +00:00
_INSTALLFLAGS:= ${INSTALLFLAGS}
Add variable INSTALLFLAGS_EDIT used to remove arbitrary INSTALLFLAGS. Specifically intended for removing -fschg ("INSTALLFLAGS_EDIT=:S/schg/uchg/") this makes the NOFSCHG flag redundant. NOFSCHG will still be honoured by bsd.lib.mk but is valid for buildworld only. NOFSCHG is still implemented in the old way (ie. _not_ ".if NOFSCHG then { INSTALLFLAGS_EDIT+=:S/schg/,/ }" to emphasize the fact that NOFSCHG is only supported in a limited fashion and for buildworld. The interface and implementation are such that future use of flags such as sappnd can also be easily removed or altered (perhaps to uappnd). This commit brought to you by the letters B, D, and E, and the numbers six, one, thirteen, and three.
1999-07-31 20:27:33 +00:00
.for ie in ${INSTALLFLAGS_EDIT}
_INSTALLFLAGS:= ${_INSTALLFLAGS${ie}}
.endfor
The install.debug and reinstall.debug targets are needed solely to build kernel and kernel modules so stop supporting them in bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk as special versions of the install and reinstall targets, and only define them if DEBUG is also defined (when debug versions are really built). Prompted by: bde
2002-04-24 11:26:19 +00:00
.if defined(DEBUG)
Merge bsd.obj.mk's version of the _SUBDIR target with bsd.subdir.mk. Ensure all standard targets honor SUBDIR. Now `make obj' descends into SUBDIRs even if NOOBJ is set (some descendants may still need an object directory, but we do not have such precedents). Now `make install' in non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install' in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong order anyway. Fixed `distribute' targets (except for the bsd.subdir.mk version) so that they do not depend on _SUBDIR; `distribute' calls `install' which already depends on _SUBDIR. De-standardize `maninstall', otherwise manpages would be installed twice. (To be revised later.)
2002-04-23 09:03:56 +00:00
install.debug:
The install.debug and reinstall.debug targets are needed solely to build kernel and kernel modules so stop supporting them in bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk as special versions of the install and reinstall targets, and only define them if DEBUG is also defined (when debug versions are really built). Prompted by: bde
2002-04-24 11:26:19 +00:00
cd ${.CURDIR}; ${MAKE} -DINSTALL_DEBUG install
.endif
Support the "install.debug" and "reinstall.debug" targets for kernel modules. Small tweaks to kldxref may be necessary to avoid the surprising (but harm- less) behaviour of 'kldload foo' loading foo.ko.debug instead of foo.ko if it is present in the kernel directory. Approved by: a week of silence on -arch MFC after: 2 weeks
2001-10-27 00:52:50 +00:00
Merge bsd.obj.mk's version of the _SUBDIR target with bsd.subdir.mk. Ensure all standard targets honor SUBDIR. Now `make obj' descends into SUBDIRs even if NOOBJ is set (some descendants may still need an object directory, but we do not have such precedents). Now `make install' in non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install' in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong order anyway. Fixed `distribute' targets (except for the bsd.subdir.mk version) so that they do not depend on _SUBDIR; `distribute' calls `install' which already depends on _SUBDIR. De-standardize `maninstall', otherwise manpages would be installed twice. (To be revised later.)
2002-04-23 09:03:56 +00:00
realinstall:
The install.debug and reinstall.debug targets are needed solely to build kernel and kernel modules so stop supporting them in bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk as special versions of the install and reinstall targets, and only define them if DEBUG is also defined (when debug versions are really built). Prompted by: bde
2002-04-24 11:26:19 +00:00
.if defined(DEBUG) && defined(INSTALL_DEBUG)
${INSTALL} ${COPY} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
${_INSTALLFLAGS} ${FULLPROG} ${DESTDIR}${KMODDIR}/
.else
remove variables KMODGRP?=, KMODOWN?=, KMODMODE?= replace ${BIN*} variables with ${KMOD*} variables cleanup manpage code include bsd.obj.mk remove targets clean, cleandir, obj (included by bsd.obj.mk)
1996-04-11 23:03:10 +00:00
${INSTALL} ${COPY} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \
Make sure that installing a module complains if the target modules directory does not exist, instead of creating/overwriting a file with the name of the (expected) directory. Yes, this deviates a bit from nearly all other install targets in the tree, but let's face it, removing a modules directory is not all that uncommon a mistake, and finding a file with the contents of the last module installed is a baaad surprise at boot time.. PR: 26317 Submitted by: "T. William Wells" <bill@twwells.com> (the PR) Gregory Bond <gnb@itga.com.au> (the actual patch) Reviewed by: silence on -arch and -audit for the last 10 days MFC after: 2 weeks
2001-07-18 09:59:55 +00:00
${_INSTALLFLAGS} ${PROG} ${DESTDIR}${KMODDIR}/
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
.if defined(LINKS) && !empty(LINKS)
@set ${LINKS}; \
while test $$# -ge 2; do \
l=${DESTDIR}$$1; \
shift; \
t=${DESTDIR}$$1; \
shift; \
${ECHO} $$t -\> $$l; \
Removed all traces of LN_FLAGS. It was only used to produce a link /usr/sbin/sysctl -> ${DESTDIR}/sbin/sysctl in some versions of 2.2, and this link was broken if DESTDIR was set. Added a SYMLINKS macro. This works the same as LINKS, except it creates symlinks and the linked-to pathname may be relative. This is more flexible than LN_FLAGS, since it supports installing symlinks independently of hard links. Use `ln -f[s] ...' instead of `rm -f ...; ln [-s] ...' for LINKS and SYMLINKS. This is equivalent if the target is neither a directory nor a symlink to a directory. PR: 8279
1999-03-23 03:06:25 +00:00
ln -f $$l $$t; \
done; true
.endif
.if defined(SYMLINKS) && !empty(SYMLINKS)
@set ${SYMLINKS}; \
while test $$# -ge 2; do \
l=$$1; \
shift; \
t=${DESTDIR}$$1; \
shift; \
${ECHO} $$t -\> $$l; \
ln -fs $$l $$t; \
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
done; true
.endif
Implement the long-awaited module->file cache database. A userland tool (kldxref(8)) keeps a cache of what modules and versions are inside what .ko files. I have tested this on both Alpha and i386. Submitted by: bp
2001-09-11 01:09:24 +00:00
.if !defined(NO_XREF)
Check that kldxref(8) exists before running it.
2002-05-14 07:49:12 +00:00
@if type kldxref >/dev/null 2>&1; then \
${ECHO} kldxref ${DESTDIR}${KMODDIR}; \
kldxref ${DESTDIR}${KMODDIR}; \
fi
Implement the long-awaited module->file cache database. A userland tool (kldxref(8)) keeps a cache of what modules and versions are inside what .ko files. I have tested this on both Alpha and i386. Submitted by: bp
2001-09-11 01:09:24 +00:00
.endif
The install.debug and reinstall.debug targets are needed solely to build kernel and kernel modules so stop supporting them in bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk as special versions of the install and reinstall targets, and only define them if DEBUG is also defined (when debug versions are really built). Prompted by: bde
2002-04-24 11:26:19 +00:00
.endif
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
Merge bsd.obj.mk's version of the _SUBDIR target with bsd.subdir.mk. Ensure all standard targets honor SUBDIR. Now `make obj' descends into SUBDIRs even if NOOBJ is set (some descendants may still need an object directory, but we do not have such precedents). Now `make install' in non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install' in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong order anyway. Fixed `distribute' targets (except for the bsd.subdir.mk version) so that they do not depend on _SUBDIR; `distribute' calls `install' which already depends on _SUBDIR. De-standardize `maninstall', otherwise manpages would be installed twice. (To be revised later.)
2002-04-23 09:03:56 +00:00
install: afterinstall
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
afterinstall: realinstall
realinstall: beforeinstall
.endif
Change DISTRIBUTION names. Also make bsd.doc.mk go to doc distribution, not bin. Hmmm.
1995-01-14 07:51:10 +00:00
DISTRIBUTION?= bin
Add a new "distribute" target. This is a variant of install, which will put the stuff into the right "distribution". As default things end up in "bindist". Normal (ie: most) makefiles know naught of this. More commits will follow, which will direct various parts of the tree into the distribution we want them in. Some of the grief of being release-engineer is supposed to go away with this.
1994-11-13 21:05:28 +00:00
.if !target(distribute)
Merge bsd.obj.mk's version of the _SUBDIR target with bsd.subdir.mk. Ensure all standard targets honor SUBDIR. Now `make obj' descends into SUBDIRs even if NOOBJ is set (some descendants may still need an object directory, but we do not have such precedents). Now `make install' in non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install' in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong order anyway. Fixed `distribute' targets (except for the bsd.subdir.mk version) so that they do not depend on _SUBDIR; `distribute' calls `install' which already depends on _SUBDIR. De-standardize `maninstall', otherwise manpages would be installed twice. (To be revised later.)
2002-04-23 09:03:56 +00:00
distribute:
Change the distribute targets so that a given item in our source tree can place itself into n distributions, where n >= 1.
1997-06-21 15:40:34 +00:00
.for dist in ${DISTRIBUTION}
cd ${.CURDIR} ; $(MAKE) install DESTDIR=${DISTDIR}/${dist} SHARED=copies
.endfor
Add a new "distribute" target. This is a variant of install, which will put the stuff into the right "distribution". As default things end up in "bindist". Normal (ie: most) makefiles know naught of this. More commits will follow, which will direct various parts of the tree into the distribution we want them in. Some of the grief of being release-engineer is supposed to go away with this.
1994-11-13 21:05:28 +00:00
.endif
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
.if !target(load)
Add support for compiling kernel modules outside of the tree. If you do not have the kernel you wish to compile against in either /usr/src/sys or /sys, then you will need to set SYSDIR to point to the sys directory of the source tree that contians the source. Also, minor tweaks to the load/unload targets from Bruce. I've had this through several make worlds, as well as using it on a daily basis for the past couple of weeks to build modules needed for testing at Timing Solutions. Reviewed and revised by: bde Work sponsored by: Timing Solutions
2000-04-08 17:20:00 +00:00
load: ${PROG}
Use OBJDIR instead of CURDIR. This unbreaks loading modules through 'make load' if an object dir was, like it is used in /sys/modules. I.e. cd /sys/modules/umass make obj make make load works again without having to install the module. If no objdir was used the module in the current directory is used.
2002-06-17 20:01:06 +00:00
${KMODLOAD} -v ${.OBJDIR}/${KMOD}.ko
A make system file for building LKMs, derived from bsd.prog.mk.
1994-09-14 21:59:28 +00:00
.endif
.if !target(unload)
1) s/mod(un)?load/kld$1load/ 2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables (KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the Makefile of the ATAPI module 3) textual fixups
1999-09-06 20:11:59 +00:00
unload:
Add support for compiling kernel modules outside of the tree. If you do not have the kernel you wish to compile against in either /usr/src/sys or /sys, then you will need to set SYSDIR to point to the sys directory of the source tree that contians the source. Also, minor tweaks to the load/unload targets from Bruce. I've had this through several make worlds, as well as using it on a daily basis for the past couple of weeks to build modules needed for testing at Timing Solutions. Reviewed and revised by: bde Work sponsored by: Timing Solutions
2000-04-08 17:20:00 +00:00
${KMODUNLOAD} -v ${KMOD}
Update the kld glue Pre-Approved by: jkh
1998-10-16 03:32:03 +00:00
.endif
Make it easier to create filesystem LKMs by doing most of the work in the Makefile. Just define VFS_LKM and you're off!
1994-09-21 03:49:59 +00:00
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
.for _src in ${SRCS:Mopt_*.h}
CLEANFILES+= ${_src}
.if !target(${_src})
${_src}:
touch ${.TARGET}
.endif
.endfor
Allow the calling Makefile to specify a list of device interfaces instead of relying on the default list provided here.
2000-04-05 10:13:05 +00:00
MFILES?= kern/bus_if.m kern/device_if.m dev/iicbus/iicbb_if.m \
Add function prototypes and base module for kernel side iconv library. Add simple "xlat" converter which performs 8to8 table based conversion. Unicode converter will be added in the near future. Reviewed by: silence on arch@ Files placement reviewed by: bde Obtained from: smbfs
2001-04-09 09:39:29 +00:00
dev/iicbus/iicbus_if.m isa/isa_if.m \
libkern/iconv_converter_if.m \
dev/mii/miibus_if.m \
Next-phase PCI system update; move PCI core code to sys/dev and update header include path to include sys/dev to avoid massive #include updates.
2000-12-08 22:26:48 +00:00
dev/pccard/card_if.m dev/pccard/power_if.m dev/pci/pci_if.m \
dev/pci/pcib_if.m dev/ppbus/ppbus_if.m dev/smbus/smbus_if.m \
kobjify. this gives us several benefits, including: * easier extensibility- new optional methods can be added to ac97/mixer/channel classes without having to fixup every driver. * forward compatibility for drivers, provided no new mandatory methods are added.
2000-12-18 01:36:41 +00:00
dev/usb/usb_if.m dev/sound/pcm/ac97_if.m dev/sound/pcm/channel_if.m \
Add pci/agp_if.m to the MFILES list so that we can auto depend on agp_if.h
2001-02-27 01:23:34 +00:00
dev/sound/pcm/feeder_if.m dev/sound/pcm/mixer_if.m pci/agp_if.m
Allow the calling Makefile to specify a list of device interfaces instead of relying on the default list provided here.
2000-04-05 10:13:05 +00:00
.for _srcsrc in ${MFILES}
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
.for _ext in c h
.for _src in ${SRCS:M${_srcsrc:T:R}.${_ext}}
CLEANFILES+= ${_src}
.if !target(${_src})
If the symbolic links @ or machine exist, do not depend on them. This fixes the problem where if src/sys or src/sys/$MACHINE_ARCH/include changed at all, all the modules would be rebuilt. Reviewed by: bde
2001-02-23 04:49:31 +00:00
.if !exists(@)
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
${_src}: @
If the symbolic links @ or machine exist, do not depend on them. This fixes the problem where if src/sys or src/sys/$MACHINE_ARCH/include changed at all, all the modules would be rebuilt. Reviewed by: bde
2001-02-23 04:49:31 +00:00
.endif
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
.if exists(@)
Use makeobjops.awk rather than makeobjops.pl. (with big thanks to Oliver Fromme <olli@fromme.com>)
2002-05-01 03:28:14 +00:00
${_src}: @/tools/makeobjops.awk @/${_srcsrc}
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
.endif
Use makeobjops.awk rather than makeobjops.pl. (with big thanks to Oliver Fromme <olli@fromme.com>)
2002-05-01 03:28:14 +00:00
${AWK} -f @/tools/makeobjops.awk @/${_srcsrc} -${_ext}
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
.endif
.endfor # _src
.endfor # _ext
.endfor # _srcsrc
Use the -c and -h args of vnode_if.sh to generate only the .h file that we use. The .c half is statically compiled into the kernel. It's kinda silly to generate a .h file on the fly that has inlines to call the .c stuff when the .c code is fixed. Also, zap the special treatment for VFS_KLD modules. This treatment applies to lots of things, not just VFS's.
1999-12-12 16:45:58 +00:00
.for _ext in c h
.if ${SRCS:Mvnode_if.${_ext}} != ""
CLEANFILES+= vnode_if.${_ext}
If the symbolic links @ or machine exist, do not depend on them. This fixes the problem where if src/sys or src/sys/$MACHINE_ARCH/include changed at all, all the modules would be rebuilt. Reviewed by: bde
2001-02-23 04:49:31 +00:00
.if !exists(@)
Use the -c and -h args of vnode_if.sh to generate only the .h file that we use. The .c half is statically compiled into the kernel. It's kinda silly to generate a .h file on the fly that has inlines to call the .c stuff when the .c code is fixed. Also, zap the special treatment for VFS_KLD modules. This treatment applies to lots of things, not just VFS's.
1999-12-12 16:45:58 +00:00
vnode_if.${_ext}: @
If the symbolic links @ or machine exist, do not depend on them. This fixes the problem where if src/sys or src/sys/$MACHINE_ARCH/include changed at all, all the modules would be rebuilt. Reviewed by: bde
2001-02-23 04:49:31 +00:00
.endif
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
.if exists(@)
Use vnode_if.awk rather than vnode_if.pl
2002-03-01 01:21:29 +00:00
vnode_if.${_ext}: @/tools/vnode_if.awk @/kern/vnode_if.src
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
.endif
Use vnode_if.awk rather than vnode_if.pl
2002-03-01 01:21:29 +00:00
${AWK} -f @/tools/vnode_if.awk @/kern/vnode_if.src -${_ext}
Build and clean device interface files (foo_if.[ch]) and empty options files (opt_*.h) automatically (if they are in ${SRCS}). Clean vnode_if.[ch] automatically (if one of them is in ${SRCS}, not just if VFS_KLD is defined). There are some complications to avoid using the "@" symlink before it is built.
1999-11-28 17:52:40 +00:00
.endif
Use the -c and -h args of vnode_if.sh to generate only the .h file that we use. The .c half is statically compiled into the kernel. It's kinda silly to generate a .h file on the fly that has inlines to call the .c stuff when the .c code is fixed. Also, zap the special treatment for VFS_KLD modules. This treatment applies to lots of things, not just VFS's.
1999-12-12 16:45:58 +00:00
.endfor
Make it easier to create filesystem LKMs by doing most of the work in the Makefile. Just define VFS_LKM and you're off!
1994-09-21 03:49:59 +00:00
Clean out most of the LKM stuff, the build support left a little while ago.
1999-04-20 14:33:24 +00:00
regress:
Introduce the 'regress' target. Silently approved by: -hackers, -current
1998-03-12 20:02:17 +00:00
Allow "make lint" to mostly work. Our sources are very unclean WRT lint, so this is turned off by default. Setting WANT_LINT will turn on generation of lint libraries for /usr/libdata/lint/*.ln. Reviewd by: silence in -audit.
2002-03-17 10:05:57 +00:00
lint: ${SRCS}
lint the previous lint commit. Reviewed by: markm
2002-03-18 09:35:45 +00:00
${LINT} ${LINTKERNFLAGS} ${CFLAGS:M-[DILU]*} ${.ALLSRC:M*.c}
Allow "make lint" to mostly work. Our sources are very unclean WRT lint, so this is turned off by default. Setting WANT_LINT will turn on generation of lint libraries for /usr/libdata/lint/*.ln. Reviewd by: silence in -audit.
2002-03-17 10:05:57 +00:00
Fix the ordering dependency I broke.
1996-06-30 22:16:19 +00:00
.include <bsd.dep.mk>
Fixed dependencies of ${PROG} on ${DPSRCS} and `all' on ${_ILINKS}. There were various races for `make -j'. Half-built versions of vnode_if.h were sometimes #included... Removed a null dependency.
1998-03-06 05:43:46 +00:00
.if !exists(${DEPENDFILE})
Removed support for now-unused FreeBSD misfeature DPSRCS.
1998-03-06 07:28:01 +00:00
${OBJS}: ${SRCS:M*.h}
Fixed dependencies of ${PROG} on ${DPSRCS} and `all' on ${_ILINKS}. There were various races for `make -j'. Half-built versions of vnode_if.h were sometimes #included... Removed a null dependency.
1998-03-06 05:43:46 +00:00
.endif
Fixed `make depend', which I broke here about a month ago by moving the null default for `depend' from bsd.dep.mk to bsd.obj.mk. bsd.kmod.mk included these files in a bad order, so it picked up the null default.
1998-06-09 02:55:40 +00:00
.include <bsd.obj.mk>
Centralized the definition of CWARNFLAGS into bsd.kern.mk.
1996-10-08 22:09:03 +00:00
.include <bsd.kern.mk>
Reference in New Issue Copy Permalink