freebsd-skq/sys/amd64/conf/GENERIC

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration -> 
# Configuring the FreeBSD Kernel -> The Configuration File. 
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server 
# <URL:http://www.FreeBSD.ORG/>
#
# An exhaustive list of options and more detailed explanations of the 
# device lines is present in the ./LINT configuration file. If you are 
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#	$Id: GENERIC,v 1.146 1999/02/04 22:34:23 adam Exp $

machine		"i386"
cpu		"I386_CPU"
cpu		"I486_CPU"
cpu		"I586_CPU"
cpu		"I686_CPU"
ident		GENERIC
maxusers	32

options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		MFS			#Memory Filesystem
options		MFS_ROOT		#MFS usable as root device, "MFS" req'ed
options		NFS			#Network Filesystem
options		NFS_ROOT		#NFS usable as root device, "NFS" req'ed
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		"CD9660_ROOT"		#CD-ROM usable as root. "CD9660" req'ed
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
options		UCONSOLE		#Allow users to grab the console
options		FAILSAFE		#Be conservative
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor

config		kernel	root on wd0

# To make an SMP kernel, the next two are needed
#options	SMP			# Symmetric MultiProcessor Kernel
#options	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options	NCPU=2			# number of CPUs
#options	NBUS=4			# number of busses
#options	NAPIC=1			# number of IO APICs
#options	NINTR=24		# number of INTs

controller	isa0
controller	pnp0			# PnP support for ISA
controller	eisa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1

options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		acd0		#IDE CD-ROM
device		wfd0		#IDE Floppy (e.g. LS-120)

# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
controller	ncr0
controller	ahb0
controller	ahc0
controller	isp0

# This controller offers a number of configuration options, too many to
# document here  - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
controller      dpt0

controller	adv0	at isa? port ? cam irq ?
controller	adw0
controller	bt0	at isa? port ? cam irq ?
controller	aha0	at isa? port ? cam irq ?
#controller	aic0	at isa? port 0x340 bio irq 11

controller	scbus0

device		da0

device		sa0

device		pass0

device		cd0	#Only need one of these, the code dynamically grows

device		wt0	at isa? port 0x300 bio irq 5 drq 1
device		mcd0	at isa? port 0x300 bio irq 10

controller	matcd0	at isa? port 0x230 bio

device		scd0	at isa? port 0x230 bio

# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD tty
device		atkbd0	at isa? tty irq 1
device		psm0	at isa? tty irq 12

device		vga0	at isa? port ? conflicts

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? tty
#options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

device		npx0	at isa? port IO_NPX irq 13

#
# Laptop support (see LINT for more options)
#
device		apm0    at isa?	disable	flags 0x31 # Advanced Power Management

# PCCARD (PCMCIA) support
#controller	card0
#device		pcic0	at card?
#device		pcic1	at card?

device		sio0	at isa? port "IO_COM1" flags 0x10 tty irq 4
device		sio1	at isa? port "IO_COM2" tty irq 3
device		sio2	at isa? disable port "IO_COM3" tty irq 5
device		sio3	at isa? disable port "IO_COM4" tty irq 9

# Parallell port
device		ppc0	at isa? port? net irq 7
constroller	ppbus0
device		nlpt0	at ppbus?
device		plip0	at ppbus?
device		ppi0	at ppbus?
#controller	vpo0	at ppbus?

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device ax0
device de0
device fxp0
device mx0
device pn0
device rl0
device tl0
device tx0
device vr0
device vx0
device wb0
device xl0

device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
device ep0 at isa? port 0x300 net irq 10
device ex0 at isa? port? net irq?
device fe0 at isa? port 0x300 net irq ?
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
device lnc0 at isa? port 0x280 net irq 10 drq 0
device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
device cs0 at isa? port 0x300 net irq ?

pseudo-device	loop
pseudo-device	ether
pseudo-device	sl	1
pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

# This provides support for System V shared memory.
#
options		SYSVSHM

#  The `bpfilter' pseudo-device enables the Berkeley Packet Filter.  Be
#  aware of the legal and administrative consequences of enabling this
#  option.  The number of devices determines the maximum number of
#  simultaneous BPF clients programs runnable.
#pseudo-device	bpfilter 4	#Berkeley packet filter


# USB support
#controller    uhci0
#controller    ohci0
#controller    usb0
#
# for the moment we have to specify the priorities of the device
# drivers explicitly by the ordering in the list below. This will
# be changed in the future.
#
#device        ums0
#device        ukbd0
#device        ulpt0
#device        uhub0
#device        ucom0
#device        umodem0
#device        hid0
#device        ugen0

#
#options       USB_DEBUG
#options       USBVERBOSE