freebsd-skq/sys/conf/Makefile.powerpc

202 lines
5.8 KiB
Makefile
Raw Normal View History

1993-06-12 14:58:17 +00:00
# Copyright 1990 W. Jolitz
This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$. Added STRIP=, DBSYM=, and LOAD_ADDRESS?= Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to cut kernel size. Added machde.o: dependency, this will be needed in the future, and for now it does not hurt anyone. Cleaned out conf.o: dependency, mkdep does the right things. Same for param.c: This is really a Merge in of NetBSD's Makefile.i386, here is the relevant rlog info: ---------------------------- revision 1.27 date: 1993/08/27 23:58:20; author: brezak; state: Exp; lines: +2 -2 Need LOAD_ADDRESS for depend pass. ---------------------------- revision 1.25 date: 1993/07/19 16:52:16; author: mycroft; state: Exp; lines: +3 -3 Add ${DEBUG} to CFLAGS and -f to dbsym. ---------------------------- revision 1.22 date: 1993/07/18 10:08:22; author: mycroft; state: Exp; lines: +5 -6 Change to work with new config stuff for specifying load address. ---------------------------- revision 1.20 date: 1993/07/18 09:47:40; author: mycroft; state: Exp; lines: +6 -5 Use new -T option to dbsym. ---------------------------- revision 1.17 date: 1993/07/11 08:42:22; author: cgd; state: Exp; lines: +2 -2 don't ignore errors from dbsym... it might say that, e.g. there's not enough symbol space! ---------------------------- revision 1.14 date: 1993/06/06 23:29:03; author: cgd; state: Exp; lines: +2 -2 make conf.o actually depend on conf.c... ---------------------------- revision 1.8 date: 1993/04/29 03:27:39; author: cgd; state: Exp; lines: +5 -10 use ed instead of ex. the script to use is identical, and we might want to switch back to using ex when our ex supports -. ---------------------------- revision 1.5 date: 1993/03/24 18:48:57; author: cgd; state: Exp; lines: +1 -1 now use absolute path for dbsym ----------------------------
1993-09-26 19:44:33 +00:00
# from: @(#)Makefile.i386 7.1 5/10/91
1995-05-30 08:16:23 +00:00
# $Id: Makefile.i386,v 1.63 1995/05/11 19:48:45 wollman Exp $
This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$. Added STRIP=, DBSYM=, and LOAD_ADDRESS?= Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to cut kernel size. Added machde.o: dependency, this will be needed in the future, and for now it does not hurt anyone. Cleaned out conf.o: dependency, mkdep does the right things. Same for param.c: This is really a Merge in of NetBSD's Makefile.i386, here is the relevant rlog info: ---------------------------- revision 1.27 date: 1993/08/27 23:58:20; author: brezak; state: Exp; lines: +2 -2 Need LOAD_ADDRESS for depend pass. ---------------------------- revision 1.25 date: 1993/07/19 16:52:16; author: mycroft; state: Exp; lines: +3 -3 Add ${DEBUG} to CFLAGS and -f to dbsym. ---------------------------- revision 1.22 date: 1993/07/18 10:08:22; author: mycroft; state: Exp; lines: +5 -6 Change to work with new config stuff for specifying load address. ---------------------------- revision 1.20 date: 1993/07/18 09:47:40; author: mycroft; state: Exp; lines: +6 -5 Use new -T option to dbsym. ---------------------------- revision 1.17 date: 1993/07/11 08:42:22; author: cgd; state: Exp; lines: +2 -2 don't ignore errors from dbsym... it might say that, e.g. there's not enough symbol space! ---------------------------- revision 1.14 date: 1993/06/06 23:29:03; author: cgd; state: Exp; lines: +2 -2 make conf.o actually depend on conf.c... ---------------------------- revision 1.8 date: 1993/04/29 03:27:39; author: cgd; state: Exp; lines: +5 -10 use ed instead of ex. the script to use is identical, and we might want to switch back to using ex when our ex supports -. ---------------------------- revision 1.5 date: 1993/03/24 18:48:57; author: cgd; state: Exp; lines: +1 -1 now use absolute path for dbsym ----------------------------
1993-09-26 19:44:33 +00:00
#
# Makefile for FreeBSD
1993-06-12 14:58:17 +00:00
#
# This makefile is constructed from a machine description:
# config machineid
# Most changes should be made in the machine description
# /sys/i386/conf/``machineid''
# after which you should do
# config machineid
# Generic makefile changes should be made in
# /sys/i386/conf/Makefile.i386
# after which config should be rerun for all machines.
#
1995-05-30 08:16:23 +00:00
CC?= cc
CPP?= cpp
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
LD?= /usr/bin/ld
1993-06-12 14:58:17 +00:00
.if exists(./@/.)
S= ./@
.else
1993-06-12 14:58:17 +00:00
S= ../..
.endif
I386= ${S}/i386
1993-06-12 14:58:17 +00:00
CWARNFLAGS?=-W -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit
#
# The following flags are next up for working on:
# -Wnested-externs (almost works)
# -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations
#
# When working on removing warnings from code, the `-Werror' flag should be
# of material assistance.
#
COPTFLAGS?=-O
# Not ready for -I- yet. #include "foo.h" where foo.h is in the srcdir fails.
INCLUDES= -nostdinc -I. -I$S -I$S/sys
# This hack is to allow kernel compiles to succeed on machines w/out srcdist
.if exists($S/../include)
INCLUDES+= -I$S/../include
.else
INCLUDES+= -I/usr/include
.endif
COPTS= ${INCLUDES} ${IDENT} -DKERNEL -Di386 -DLOAD_ADDRESS=0x${LOAD_ADDRESS}
1993-06-12 14:58:17 +00:00
ASFLAGS=
CFLAGS= ${COPTFLAGS} ${CWARNFLAGS} ${DEBUG} ${COPTS}
LOAD_ADDRESS?= F0100000
1993-06-12 14:58:17 +00:00
NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<
# XXX errors leak out of all the pipes. Should use cc *.S.
# XXX LOCORE means "don't declare C stuff" not "for locore.s".
NORMAL_S= ${CPP} -DLOCORE ${COPTS} $< | ${AS} ${ASFLAGS} -o $*.o
1993-06-12 14:58:17 +00:00
DRIVER_C= ${CC} -c ${CFLAGS} ${PROF} $<
DRIVER_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<
PROFILE_C= ${CC} -c ${CFLAGS} ${PARAM} $<
SFILES= ${I386}/i386/exception.s ${I386}/i386/microtime.s \
${I386}/i386/support.s ${I386}/i386/swtch.s ${I386}/apm/apm_setup.s
SYSTEM_CFILES= ioconf.c param.c vnode_if.c
SYSTEM_SFILES= ${I386}/i386/locore.s
1995-05-30 08:16:23 +00:00
SYSTEM_OBJS= locore.o vnode_if.o ${OBJS} ioconf.o param.o
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
SYSTEM_DEP= Makefile symbols.exclude symbols.sort ${SYSTEM_OBJS} libkern.a
SYSTEM_LD_HEAD= @echo loading $@; rm -f $@
SYSTEM_LD= @${LD} -Bstatic -Z -T ${LOAD_ADDRESS} -o $@ -X ${SYSTEM_OBJS} vers.o libkern.a
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
.if ${CFLAGS:M-g} == ""
SYMORDER_EXCLUDE=-x symbols.exclude
.endif
SYSTEM_LD_TAIL= @echo rearranging symbols; \
symorder -m ${SYMORDER_EXCLUDE} symbols.sort $@; \
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
size $@; chmod 755 $@
1993-06-12 14:58:17 +00:00
%BEFORE_DEPEND
1993-06-12 14:58:17 +00:00
%OBJS
%CFILES
%LOAD
%CLEAN
# This is slightly different from before in that if you define PROF
# to anything, it will assume profiling. Don't do "PROF=" to turn
# profiling off!
.if exists($S/libkern/obj)
LIBKERNP=$S/libkern/obj
.else
LIBKERNP=$S/libkern
.endif
.if defined(PROF)
LIBKERN=${LIBKERNP}/libkern_p.a
.else
LIBKERN=${LIBKERNP}/libkern.a
.endif
libkern.a: ${LIBKERN}
@rm -f libkern.a
ln -s ${LIBKERN} libkern.a
${LIBKERN}:
@(cd $S/libkern; make)
1993-06-12 14:58:17 +00:00
clean:
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
rm -f eddep kernel tags *.o *.s errs linterrs makelinks genassym \
symbols.exclude symbols.sort ${CLEAN}
1993-06-12 14:58:17 +00:00
#lint: /tmp param.c
# @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} \
# ${I386}/i386/Locore.c ${CFILES} ioconf.c param.c | \
# grep -v 'struct/union .* never defined' | \
# grep -v 'possible pointer alignment problem'
1993-06-12 14:58:17 +00:00
Load the kernel symbol table in the boot loader and not at compile time. (Boot with the -D flag if you want symbols.) Make it easier to extend `struct bootinfo' without losing either forwards or backwards compatibility. ddb_aout.c: Get the symbol table from wherever the loader put it. Nuke db_symtab[SYMTAB_SPACE]. boot.c: Enable loading of symbols. Align them on a page boundary. Add printfs about the symbol table sizes. Pass the memory sizes to the kernel. Fix initialization of `unit' (it got moved out of the loop). Fix adding the bss size (it got moved inside an ifdef). Initialize serial port when RB_SERIAL is toggled on. Fix comments. Clean up formatting of recently added code. io.c: Clean up formatting of recently added code. netboot/main.c, machdep.c, wd.c: Change names of bootinfo fields. LINT: Nuke SYMTAB_SPACE. Fix comment about DODUMP. Makefile.i386: Nuke use of dbsym. Exclude gcc symbols from kernel unless compiling with -g. Remove unused macro. Fix comments and formatting. genassym.c: Generate defines for some new bootinfo fields. Change names of old ones. locore.s: Copy only the valid part of the `struct bootinfo' passed by the loader. Reserve space for symbol table, if any. machdep.c: Check the memory sizes passed by the loader, if any. Don't use them yet. bootinfo.h: Add a size field so that we can resolve some mismatches between the loader bootinfo and the kernel boot info. The version number is not so good for this because of historical botches and because it's harder to maintain. Add memory size and symbol table fields. Change the names of everything. Hacks to save a few bytes: asm.S, boot.c, boot2.S: Replace `ouraddr' by `(BOOTSEG << 4)'. boot.c: Don't statically initialize `loadflags' to 0. Disable the "REDUNDANT" code that skips the BIOS variables. Eliminate `total'. Combine some more printfs. boot.h, disk.c, io.c, table.c: Move all statically initialzed data to table.c. io.c: Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
symbols.exclude: Makefile
echo "gcc2_compiled." >symbols.exclude
echo "___gnu_compiled_c" >>symbols.exclude
1993-06-12 14:58:17 +00:00
symbols.sort: ${I386}/i386/symbols.raw
grep -v '^#' ${I386}/i386/symbols.raw \
| sed 's/^ //' | sort -u > symbols.sort
locore.o: ${I386}/i386/locore.s assym.s
${NORMAL_S}
# everything potentially depends on the Makefile since everything potentially
# depends on the options. Some things are more dependent on the Makefile for
# historical reasons.
machdep.o: Makefile
This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$. Added STRIP=, DBSYM=, and LOAD_ADDRESS?= Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to cut kernel size. Added machde.o: dependency, this will be needed in the future, and for now it does not hurt anyone. Cleaned out conf.o: dependency, mkdep does the right things. Same for param.c: This is really a Merge in of NetBSD's Makefile.i386, here is the relevant rlog info: ---------------------------- revision 1.27 date: 1993/08/27 23:58:20; author: brezak; state: Exp; lines: +2 -2 Need LOAD_ADDRESS for depend pass. ---------------------------- revision 1.25 date: 1993/07/19 16:52:16; author: mycroft; state: Exp; lines: +3 -3 Add ${DEBUG} to CFLAGS and -f to dbsym. ---------------------------- revision 1.22 date: 1993/07/18 10:08:22; author: mycroft; state: Exp; lines: +5 -6 Change to work with new config stuff for specifying load address. ---------------------------- revision 1.20 date: 1993/07/18 09:47:40; author: mycroft; state: Exp; lines: +6 -5 Use new -T option to dbsym. ---------------------------- revision 1.17 date: 1993/07/11 08:42:22; author: cgd; state: Exp; lines: +2 -2 don't ignore errors from dbsym... it might say that, e.g. there's not enough symbol space! ---------------------------- revision 1.14 date: 1993/06/06 23:29:03; author: cgd; state: Exp; lines: +2 -2 make conf.o actually depend on conf.c... ---------------------------- revision 1.8 date: 1993/04/29 03:27:39; author: cgd; state: Exp; lines: +5 -10 use ed instead of ex. the script to use is identical, and we might want to switch back to using ex when our ex supports -. ---------------------------- revision 1.5 date: 1993/03/24 18:48:57; author: cgd; state: Exp; lines: +1 -1 now use absolute path for dbsym ----------------------------
1993-09-26 19:44:33 +00:00
1993-06-12 14:58:17 +00:00
# the following is necessary because autoconf.o depends on #if GENERIC
autoconf.o: Makefile
# depend on network configuration
af.o uipc_proto.o locore.o: Makefile
# depends on KDB (cons.o also depends on GENERIC)
trap.o cons.o: Makefile
# this rule stops ./assym.s in .depend from causing problems
./assym.s: assym.s
assym.s: genassym
./genassym >assym.s
1995-05-30 08:16:23 +00:00
# Some of the defines that genassym outputs may well depend on the
# value of kernel options.
genassym.o: ${I386}/i386/genassym.c Makefile
${CC} -c ${CFLAGS} ${PARAM} -UKERNEL ${I386}/i386/genassym.c
genassym: genassym.o
${CC} -static ${CFLAGS} ${PARAM} genassym.o -o $@
1993-06-12 14:58:17 +00:00
# XXX this assumes that the options for NORMAL_C* and DRIVER_C* are identical.
depend: assym.s param.c vnode_if.h ${BEFORE_DEPEND}
mkdep ${COPTS} ${CFILES} ${SYSTEM_CFILES}
mkdep -a ${COPTS} ${PARAM} -UKERNEL ${I386}/i386/genassym.c
MKDEP_CPP=${CPP} ; export MKDEP_CPP ; \
mkdep -a -DLOCORE ${COPTS} ${SFILES} ${SYSTEM_SFILES}
1993-06-12 14:58:17 +00:00
links:
egrep '#if' ${CFILES:Nswapkernel.c} | sed -f $S/conf/defines | \
1993-06-12 14:58:17 +00:00
sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
echo ${CFILES:Nswapkernel.c} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
1993-06-12 14:58:17 +00:00
sort -u | comm -23 - dontlink | \
sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
sh makelinks && rm -f dontlink
tags:
@echo "see $S/kern/Makefile for tags"
install:
chflags noschg /kernel
mv /kernel /kernel.old
install -c -m 555 -o root -g wheel -fschg kernel /
1993-06-12 14:58:17 +00:00
ioconf.o: ioconf.c $S/sys/param.h machine/pte.h $S/sys/buf.h \
${I386}/isa/isa_device.h ${I386}/isa/isa.h ${I386}/isa/icu.h
${CC} -c ${CFLAGS} ioconf.c
This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$. Added STRIP=, DBSYM=, and LOAD_ADDRESS?= Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to cut kernel size. Added machde.o: dependency, this will be needed in the future, and for now it does not hurt anyone. Cleaned out conf.o: dependency, mkdep does the right things. Same for param.c: This is really a Merge in of NetBSD's Makefile.i386, here is the relevant rlog info: ---------------------------- revision 1.27 date: 1993/08/27 23:58:20; author: brezak; state: Exp; lines: +2 -2 Need LOAD_ADDRESS for depend pass. ---------------------------- revision 1.25 date: 1993/07/19 16:52:16; author: mycroft; state: Exp; lines: +3 -3 Add ${DEBUG} to CFLAGS and -f to dbsym. ---------------------------- revision 1.22 date: 1993/07/18 10:08:22; author: mycroft; state: Exp; lines: +5 -6 Change to work with new config stuff for specifying load address. ---------------------------- revision 1.20 date: 1993/07/18 09:47:40; author: mycroft; state: Exp; lines: +6 -5 Use new -T option to dbsym. ---------------------------- revision 1.17 date: 1993/07/11 08:42:22; author: cgd; state: Exp; lines: +2 -2 don't ignore errors from dbsym... it might say that, e.g. there's not enough symbol space! ---------------------------- revision 1.14 date: 1993/06/06 23:29:03; author: cgd; state: Exp; lines: +2 -2 make conf.o actually depend on conf.c... ---------------------------- revision 1.8 date: 1993/04/29 03:27:39; author: cgd; state: Exp; lines: +5 -10 use ed instead of ex. the script to use is identical, and we might want to switch back to using ex when our ex supports -. ---------------------------- revision 1.5 date: 1993/03/24 18:48:57; author: cgd; state: Exp; lines: +1 -1 now use absolute path for dbsym ----------------------------
1993-09-26 19:44:33 +00:00
param.c: $S/conf/param.c
1993-06-12 14:58:17 +00:00
-rm -f param.c
cp $S/conf/param.c .
param.o: param.c Makefile
${CC} -c ${CFLAGS} ${PARAM} param.c
This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$. Added STRIP=, DBSYM=, and LOAD_ADDRESS?= Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to cut kernel size. Added machde.o: dependency, this will be needed in the future, and for now it does not hurt anyone. Cleaned out conf.o: dependency, mkdep does the right things. Same for param.c: This is really a Merge in of NetBSD's Makefile.i386, here is the relevant rlog info: ---------------------------- revision 1.27 date: 1993/08/27 23:58:20; author: brezak; state: Exp; lines: +2 -2 Need LOAD_ADDRESS for depend pass. ---------------------------- revision 1.25 date: 1993/07/19 16:52:16; author: mycroft; state: Exp; lines: +3 -3 Add ${DEBUG} to CFLAGS and -f to dbsym. ---------------------------- revision 1.22 date: 1993/07/18 10:08:22; author: mycroft; state: Exp; lines: +5 -6 Change to work with new config stuff for specifying load address. ---------------------------- revision 1.20 date: 1993/07/18 09:47:40; author: mycroft; state: Exp; lines: +6 -5 Use new -T option to dbsym. ---------------------------- revision 1.17 date: 1993/07/11 08:42:22; author: cgd; state: Exp; lines: +2 -2 don't ignore errors from dbsym... it might say that, e.g. there's not enough symbol space! ---------------------------- revision 1.14 date: 1993/06/06 23:29:03; author: cgd; state: Exp; lines: +2 -2 make conf.o actually depend on conf.c... ---------------------------- revision 1.8 date: 1993/04/29 03:27:39; author: cgd; state: Exp; lines: +5 -10 use ed instead of ex. the script to use is identical, and we might want to switch back to using ex when our ex supports -. ---------------------------- revision 1.5 date: 1993/03/24 18:48:57; author: cgd; state: Exp; lines: +1 -1 now use absolute path for dbsym ----------------------------
1993-09-26 19:44:33 +00:00
vers.o: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP}
1993-06-12 14:58:17 +00:00
sh $S/conf/newvers.sh ${KERN_IDENT} ${IDENT}
${CC} ${CFLAGS} -c vers.c
vnode_if.c: $S/kern/vnode_if.sh $S/kern/vnode_if.src
sh $S/kern/vnode_if.sh $S/kern/vnode_if.src
vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src
sh $S/kern/vnode_if.sh $S/kern/vnode_if.src
1993-06-12 14:58:17 +00:00
%RULES
# DO NOT DELETE THIS LINE -- make depend uses it