freebsd-skq/sys/kern/subr_clock.c

387 lines
11 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1982, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: clock.c 1.18 91/01/21$
* from: @(#)clock.c 8.2 (Berkeley) 1/12/94
* from: NetBSD: clock_subr.c,v 1.6 2001/07/07 17:04:02 thorpej Exp
* and
* from: src/sys/i386/isa/clock.c,v 1.176 2001/09/04
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/clock.h>
#include <sys/limits.h>
#include <sys/sysctl.h>
#include <sys/timetc.h>
/*
* The adjkerntz and wall_cmos_clock sysctls are in the "machdep" sysctl
* namespace because they were misplaced there originally.
*/
static int adjkerntz;
static int
sysctl_machdep_adjkerntz(SYSCTL_HANDLER_ARGS)
{
int error;
error = sysctl_handle_int(oidp, oidp->oid_arg1, oidp->oid_arg2, req);
if (!error && req->newptr)
resettodr();
return (error);
}
SYSCTL_PROC(_machdep, OID_AUTO, adjkerntz, CTLTYPE_INT | CTLFLAG_RW |
CTLFLAG_MPSAFE, &adjkerntz, 0, sysctl_machdep_adjkerntz, "I",
2010-11-14 16:10:15 +00:00
"Local offset from UTC in seconds");
static int ct_debug;
SYSCTL_INT(_debug, OID_AUTO, clocktime, CTLFLAG_RWTUN,
&ct_debug, 0, "Enable printing of clocktime debugging");
static int wall_cmos_clock;
SYSCTL_INT(_machdep, OID_AUTO, wall_cmos_clock, CTLFLAG_RW,
&wall_cmos_clock, 0, "Enables application of machdep.adjkerntz");
/*--------------------------------------------------------------------*
* Generic routines to convert between a POSIX date
* (seconds since 1/1/1970) and yr/mo/day/hr/min/sec
* Derived from NetBSD arch/hp300/hp300/clock.c
*/
#define FEBRUARY 2
#define days_in_year(y) (leapyear(y) ? 366 : 365)
#define days_in_month(y, m) \
(month_days[(m) - 1] + (m == FEBRUARY ? leapyear(y) : 0))
/* Day of week. Days are counted from 1/1/1970, which was a Thursday */
#define day_of_week(days) (((days) + 4) % 7)
static const int month_days[12] = {
31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
};
/*
* Optimization: using a precomputed count of days between POSIX_BASE_YEAR and
* some recent year avoids lots of unnecessary loop iterations in conversion.
* recent_base_days is the number of days before the start of recent_base_year.
*/
static const int recent_base_year = 2017;
static const int recent_base_days = 17167;
/*
* Table to 'calculate' pow(10, 9 - nsdigits) via lookup of nsdigits.
* Before doing the lookup, the code asserts 0 <= nsdigits <= 9.
*/
static u_int nsdivisors[] = {
1000000000, 100000000, 10000000, 1000000, 100000, 10000, 1000, 100, 10, 1
};
/*
* This inline avoids some unnecessary modulo operations
* as compared with the usual macro:
* ( ((year % 4) == 0 &&
* (year % 100) != 0) ||
* ((year % 400) == 0) )
* It is otherwise equivalent.
*/
static int
leapyear(int year)
{
int rv = 0;
if ((year & 3) == 0) {
rv = 1;
if ((year % 100) == 0) {
rv = 0;
if ((year % 400) == 0)
rv = 1;
}
}
return (rv);
}
int
clock_ct_to_ts(const struct clocktime *ct, struct timespec *ts)
{
int i, year, days;
if (ct_debug) {
printf("ct_to_ts([");
clock_print_ct(ct, 9);
printf("])");
}
/*
* Many realtime clocks store the year as 2-digit BCD; pivot on 70 to
* determine century. Some clocks have a "century bit" and drivers do
* year += 100, so interpret values between 70-199 as relative to 1900.
*/
year = ct->year;
if (year < 70)
year += 2000;
else if (year < 200)
year += 1900;
/* Sanity checks. */
if (ct->mon < 1 || ct->mon > 12 || ct->day < 1 ||
ct->day > days_in_month(year, ct->mon) ||
ct->hour > 23 || ct->min > 59 || ct->sec > 59 || year < 1970 ||
(sizeof(time_t) == 4 && year > 2037)) { /* time_t overflow */
if (ct_debug)
printf(" = EINVAL\n");
return (EINVAL);
}
/*
* Compute days since start of time
* First from years, then from months.
*/
if (year >= recent_base_year) {
i = recent_base_year;
days = recent_base_days;
} else {
i = POSIX_BASE_YEAR;
days = 0;
}
for (; i < year; i++)
days += days_in_year(i);
/* Months */
for (i = 1; i < ct->mon; i++)
days += days_in_month(year, i);
days += (ct->day - 1);
ts->tv_sec = (((time_t)days * 24 + ct->hour) * 60 + ct->min) * 60 +
ct->sec;
ts->tv_nsec = ct->nsec;
if (ct_debug)
printf(" = %jd.%09ld\n", (intmax_t)ts->tv_sec, ts->tv_nsec);
return (0);
}
int
clock_bcd_to_ts(const struct bcd_clocktime *bct, struct timespec *ts, bool ampm)
{
struct clocktime ct;
int bcent, byear;
/*
* Year may come in as 2-digit or 4-digit BCD. Split the value into
* separate BCD century and year values for validation and conversion.
*/
bcent = bct->year >> 8;
byear = bct->year & 0xff;
/*
* Ensure that all values are valid BCD numbers, to avoid assertions in
* the BCD-to-binary conversion routines. clock_ct_to_ts() will further
* validate the field ranges (such as 0 <= min <= 59) during conversion.
*/
if (!validbcd(bcent) || !validbcd(byear) || !validbcd(bct->mon) ||
!validbcd(bct->day) || !validbcd(bct->hour) ||
!validbcd(bct->min) || !validbcd(bct->sec)) {
if (ct_debug)
printf("clock_bcd_to_ts: bad BCD: "
"[%04x-%02x-%02x %02x:%02x:%02x]\n",
bct->year, bct->mon, bct->day,
bct->hour, bct->min, bct->sec);
return (EINVAL);
}
ct.year = FROMBCD(byear) + FROMBCD(bcent) * 100;
ct.mon = FROMBCD(bct->mon);
ct.day = FROMBCD(bct->day);
ct.hour = FROMBCD(bct->hour);
ct.min = FROMBCD(bct->min);
ct.sec = FROMBCD(bct->sec);
ct.dow = bct->dow;
ct.nsec = bct->nsec;
/* If asked to handle am/pm, convert from 12hr+pmflag to 24hr. */
if (ampm) {
if (ct.hour == 12)
ct.hour = 0;
if (bct->ispm)
ct.hour += 12;
}
return (clock_ct_to_ts(&ct, ts));
}
void
clock_ts_to_ct(const struct timespec *ts, struct clocktime *ct)
{
time_t i, year, days;
time_t rsec; /* remainder seconds */
time_t secs;
secs = ts->tv_sec;
days = secs / SECDAY;
rsec = secs % SECDAY;
ct->dow = day_of_week(days);
/* Subtract out whole years. */
if (days >= recent_base_days) {
year = recent_base_year;
days -= recent_base_days;
} else {
year = POSIX_BASE_YEAR;
}
for (; days >= days_in_year(year); year++)
days -= days_in_year(year);
ct->year = year;
/* Subtract out whole months, counting them in i. */
for (i = 1; days >= days_in_month(year, i); i++)
days -= days_in_month(year, i);
ct->mon = i;
/* Days are what is left over (+1) from all that. */
ct->day = days + 1;
/* Hours, minutes, seconds are easy */
ct->hour = rsec / 3600;
rsec = rsec % 3600;
ct->min = rsec / 60;
rsec = rsec % 60;
ct->sec = rsec;
ct->nsec = ts->tv_nsec;
if (ct_debug) {
printf("ts_to_ct(%jd.%09ld) = [",
(intmax_t)ts->tv_sec, ts->tv_nsec);
clock_print_ct(ct, 9);
printf("]\n");
}
KASSERT(ct->year >= 0 && ct->year < 10000,
("year %d isn't a 4 digit year", ct->year));
KASSERT(ct->mon >= 1 && ct->mon <= 12,
("month %d not in 1-12", ct->mon));
KASSERT(ct->day >= 1 && ct->day <= 31,
("day %d not in 1-31", ct->day));
KASSERT(ct->hour >= 0 && ct->hour <= 23,
("hour %d not in 0-23", ct->hour));
KASSERT(ct->min >= 0 && ct->min <= 59,
("minute %d not in 0-59", ct->min));
/* Not sure if this interface needs to handle leapseconds or not. */
KASSERT(ct->sec >= 0 && ct->sec <= 60,
("seconds %d not in 0-60", ct->sec));
}
void
clock_ts_to_bcd(const struct timespec *ts, struct bcd_clocktime *bct, bool ampm)
{
struct clocktime ct;
clock_ts_to_ct(ts, &ct);
/* If asked to handle am/pm, convert from 24hr to 12hr+pmflag. */
bct->ispm = false;
if (ampm) {
if (ct.hour >= 12) {
ct.hour -= 12;
bct->ispm = true;
}
if (ct.hour == 0)
ct.hour = 12;
}
bct->year = TOBCD(ct.year % 100) | (TOBCD(ct.year / 100) << 8);
bct->mon = TOBCD(ct.mon);
bct->day = TOBCD(ct.day);
bct->hour = TOBCD(ct.hour);
bct->min = TOBCD(ct.min);
bct->sec = TOBCD(ct.sec);
bct->dow = ct.dow;
bct->nsec = ct.nsec;
}
void
clock_print_bcd(const struct bcd_clocktime *bct, int nsdigits)
{
KASSERT(nsdigits >= 0 && nsdigits <= 9, ("bad nsdigits %d", nsdigits));
if (nsdigits > 0) {
printf("%4.4x-%2.2x-%2.2x %2.2x:%2.2x:%2.2x.%*.*ld",
bct->year, bct->mon, bct->day,
bct->hour, bct->min, bct->sec,
nsdigits, nsdigits, bct->nsec / nsdivisors[nsdigits]);
} else {
printf("%4.4x-%2.2x-%2.2x %2.2x:%2.2x:%2.2x",
bct->year, bct->mon, bct->day,
bct->hour, bct->min, bct->sec);
}
}
void
clock_print_ct(const struct clocktime *ct, int nsdigits)
{
KASSERT(nsdigits >= 0 && nsdigits <= 9, ("bad nsdigits %d", nsdigits));
if (nsdigits > 0) {
printf("%04d-%02d-%02d %02d:%02d:%02d.%*.*ld",
ct->year, ct->mon, ct->day,
ct->hour, ct->min, ct->sec,
nsdigits, nsdigits, ct->nsec / nsdivisors[nsdigits]);
} else {
printf("%04d-%02d-%02d %02d:%02d:%02d",
ct->year, ct->mon, ct->day,
ct->hour, ct->min, ct->sec);
}
}
void
clock_print_ts(const struct timespec *ts, int nsdigits)
{
struct clocktime ct;
clock_ts_to_ct(ts, &ct);
clock_print_ct(&ct, nsdigits);
}
int
utc_offset(void)
{
Kill tz_minuteswest and tz_dsttime. Research Unix, 7th Edition introduced TIMEZONE and DSTFLAG compile-time constants in sys/param.h to communicate these values for the machine. 4.2BSD moved from the compile-time to run-time and introduced these variables and used for localtime() to return the right offset from UTC (sometimes referred to as GMT, for this purpose is the same). 4.4BSD migrated to using the tzdata code/database and these variables were basically unused. FreeBSD removed the real need for these with adjkerntz in 1995. However, some RTC clocks continued to use these variables, though they were largely unused otherwise. Later, phk centeralized most of the uses in utc_offset, but left it using both tz_minuteswest and adjkerntz. POSIX (IEEE Std 1003.1-2017) states in the gettimeofday specification "If tzp is not a null pointer, the behavior is unspecified" so there's no standards reason to retain it anymore. In fact, gettimeofday has been marked as obsolecent, meaning it could be removed from a future release of the standard. It is the only interface defined in POSIX that references these two values. All other references come from the tzdata database via tzset(). These were used to more faithfully implement early unix ABIs which have been removed from FreeBSD. NetBSD has completely eliminated these variables years ago. Linux has migrated to tzdata as well, though these variables technically still exist for compatibility with unspecified older programs. So, there's no real reason to have them these days. They are a historical vestige that's no longer used in any meaningful way. Reviewed By: jhb@, brooks@ Differential Revision: https://reviews.freebsd.org/D19550
2019-03-12 04:49:47 +00:00
return (wall_cmos_clock ? adjkerntz : 0);
}