freebsd-skq/etc/rc.conf

#!/bin/sh
#

# This is rc.conf - a file full of useful variables that you can set 
# to change the default startup behavior of your system.
#
# All arguments must be in double or single quotes.
#
#	$Id: rc.conf,v 1.77 1999/01/25 18:24:46 dillon Exp $

##############################################################
### Important initial Boot-time options  #####################
##############################################################

swapfile="NO"		# Set to name of swapfile if aux swapfile desired.
apm_enable="NO"		# Set to YES if you want APM enabled.
pccard_enable="NO"	# Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT"	# If pccard_enable=YES, this is card memory address.
pccard_ifconfig="NO"	# Specialized pccard ethernet configuration (or NO).
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"	# startup script dirs.
local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs


##############################################################
###  Network configuration sub-section  ######################
##############################################################

### Basic network options: ###
hostname="myname.my.domain"	# Set this!
nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
firewall_enable="NO"		# Set to YES to enable firewall functionality
firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
firewall_quiet="NO"		# Set to YES to suppress rule display
natd_enable="NO"                # Enable natd (if firewall_enable == YES).
natd_interface="fxp0"           # Public interface to use with natd.
natd_flags=""                   # Additional flags for natd.
tcp_extensions="NO"		# Disallow RFC1323 extensions (or YES).
network_interfaces="lo0"	# List of network interfaces (lo0 is loopback).
ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
#
# If you have any sppp(4) interfaces above, you might also want to set
# the following parameters.  Refer to spppcontrol(8) for their meaning.
sppp_interfaces=""		# List of sppp interfaces.
#sppp_interfaces="isp0"		# example: sppp over ISDN
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"

### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES"		# Run syslog daemon (or NO).
syslogd_flags=""		# Flags to syslogd (if enabled).
inetd_enable="YES"		# Run the network daemon dispatcher (or NO).
inetd_flags=""			# Optional flags to inetd.
#
# named.  It may be possible to run named in a sandbox, man security for
# details.
#
named_enable="NO"		# Run named, the DNS server (or NO).
named_program="named"		# path to named, if you want a different one.
named_flags=""			# Flags for named
#named_flags="-u bind -g bind"	# Flags for named

kerberos_server_enable="NO"	# Run a kerberos master server (or NO).
kadmind_server_enable="NO"	# Run kadmind (or NO) -- do not run on
				# a slave kerberos server
kerberos_stash=""		# Is the kerberos master key stashed?
rwhod_enable="NO"		# Run the rwho daemon (or NO).
rwhod_flags=""			# Flags for rwhod
amd_enable="NO"			# Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
amd_map_program="NO"		# Can be set to "ypcat -k amd.master"
nfs_client_enable="NO"		# This host is an NFS client (or NO).
nfs_client_flags="-n 4"		# Flags to nfsiod (if enabled).
nfs_access_cache="2"		# Client cache timeout in seconds
nfs_server_enable="NO"		# This host is an NFS server (or NO).
nfs_server_flags="-u -t -n 4"	# Flags to nfsd (if enabled).
mountd_flags="-r"		# Flags to mountd (if NFS server enabled).
nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO"		# Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES"		# Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES"		# Run the portmapper service (or NO).
portmap_flags=""		# Flags to portmap (if enabled).
rpc_ypupdated_enable="NO"	# Run if NIS master and SecureRPC (or NO).
keyserv_enable="NO"		# Run the SecureRPC keyserver (or NO).
keyserv_flags=""		# Flags to keyserv (if enabled).
rarpd_enable="NO"		# Run rarpd (or NO).
rarpd_flags=""			# Flags to rarpd.
xtend_enable="NO"		# Run the X-10 power controller daemon.
xtend_flags=""			# Flags to xtend (if enabled).

### Network Time Services options: ###
timed_enable="NO"		# Run the time daemon (or NO).
timed_flags=""			# Flags to timed (if enabled).
ntpdate_enable="NO"		# Run the ntpdate to sync time (or NO).
ntpdate_program="ntpdate"	# path to ntpdate, if you want a different one.
ntpdate_flags=""		# Flags to ntpdate (if enabled).
xntpd_enable="NO"		# Run xntpd Network Time Protocol (or NO).
xntpd_program="xntpd"		# path to xntpd, if you want a different one.
xntpd_flags="-p /var/run/xntpd.pid"	# Flags to xntpd (if enabled).

# Network Information Services (NIS) options: ###
nis_client_enable="NO"		# We're an NIS client (or NO).
nis_client_flags=""		# Flags to ypbind (if enabled).
nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
nis_ypset_flags=""		# Flags to ypset (if enabled).
nis_server_enable="NO"		# We're an NIS server (or NO).
nis_server_flags=""		# Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO"	# Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags=""		# Flags to rpc.yppasswdd (if enabled).

### Network routing options: ###
defaultrouter="NO"		# Set to default gateway (or NO).
static_routes=""		# Set to static route list (or leave empty).
gateway_enable="NO"		# Set to YES if this host will be a gateway.
router_enable="NO"		# Set to YES to enable a routing daemon.
router="routed"			# Name of routing daemon to use if enabled.
router_flags="-q"		# Flags for routing daemon.
mrouted_enable="NO"		# Do multicast routing (see /etc/mrouted.conf).
mrouted_flags=""		# Flags for multicast routing daemon.
ipxgateway_enable="NO"		# Set to YES to enable IPX routing.
ipxrouted_enable="NO"		# Set to YES to run the IPX routing daemon.
ipxrouted_flags=""		# Flags for IPX routing daemon.
arpproxy_all=""			# replaces obsolete kernel option ARP_PROXYALL.
forward_sourceroute="NO"	# do source routing (only if gateway_enable is set to "YES")
accept_sourceroute="NO"		# accept source routed packets to us

### ATM interface options: ###
atm_enable="NO"			# Configure ATM interfaces (or NO).
#atm_netif_hea0="atm 1"		# Network interfaces for physical interface.
#atm_sigmgr_hea0="uni31"	# Signalling manager for physical interface.
#atm_prefix_hea0="ILMI"		# NSAP prefix (UNI interfaces only) (or ILMI).
#atm_macaddr_hea0="NO"		# Override physical MAC address (or NO).
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
#atm_scsparp_atm0="NO"		# Run SCSP/ATMARP on network interface (or NO).
atm_pvcs=""			# Set to PVC list (or leave empty).
atm_arps=""			# Set to permanent ARP list (or leave empty).

### ISDN interface options: ###
isdn_enable="NO"		# Enable the ISDN subsystem (or NO).
isdn_fsdev="/dev/ttyv4"		# Output device for fullscreen mode (or NO for daemon mode).
isdn_flags="-dn -d0x1f9"	# Flags for isdnd
isdn_trace="NO"			# Enable the ISDN trace subsystem (or NO).
isdn_traceflags="-f /var/tmp/isdntrace0"	# Flags for isdntrace

### Miscellaneous network options: ###
icmp_bmcastecho="NO"	# respond to broadcast ping packets


##############################################################
###  System console options  #################################
##############################################################

keymap="NO"		# keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
keybell="NO"		# bell to duration.pitch or normal or visual (or NO).
keychange="NO"		# function keys default values (or NO).
cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO"		# font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO"		# font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO"		# font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="300"		# blank time (in seconds) or "NO" to turn it off.
saver="NO"		# screen saver: Uses /modules/${saver}_saver.ko
moused_enable="NO"	# Run the mouse daemon.
moused_type="auto"	# See man page for rc.conf(5) for available settings.
moused_port="/dev/cuaa0" # Set to your mouse port.
moused_flags=""		# Any additional flags to moused.
allscreens_flags=""	# Set this vidcontrol mode for all virtual screens


##############################################################
###  Miscellaneous administrative options  ###################
##############################################################

cron_enable="YES"	# Run the periodic job daemon.
lpd_enable="NO"		# Run the line printer daemon.
lpd_flags=""		# Flags to lpd (if enabled).
usbd_enable="NO"	# Run the usbd daemon.
usbd_flags=""		# Flags to usbd (if enabled).
sendmail_enable="YES"	# Run the sendmail daemon (or NO).
sendmail_flags="-bd -q30m" # -bd is pretty mandatory.
dumpdev="NO"		# Device name to crashdump to (if enabled).
check_quotas="NO"	# Check quotas (or NO).
accounting_enable="NO"	# Turn on process accounting (or NO).
ibcs2_enable="NO"	# Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_enable="NO"	# Linux emulation loaded at startup (or NO).
rand_irqs="NO"		# Stir the entropy pool (like "5 11" or NO).
clear_tmp_enable="NO"	# Clear /tmp at startup.
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
			# shared library search paths
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
			# a.out shared library search paths
kern_securelevel_enable="NO"	# kernel security level (see init(8)), 
kern_securelevel="-1"	# range: -1..3 ; `-1' is the most insecure
update_motd="YES"	# update version info in /etc/motd (or NO)
vinum_slices=""		# put in names of vinum slices to enable vinum

##############################################################
### Allow local configuration override at the very end here ##
##############################################################
#
# This is typically only useful when run from /etc/rc, where
# rc.diskless may set conf_dir.  When run standalone, conf_dir
# is not set and thus /etc/rc.local is used.

if [ "X$conf_dir" = "X" ]; then
        conf_dir=/etc   
fi

if [ -f $conf_dir/rc.conf.local ]; then
        . $conf_dir/rc.conf.local
fi