d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d5290e16a1
freebsd-skq/sys/ddb/ddb.h

296 lines
10 KiB
C
Raw Normal View History

Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
/*-
* Copyright (c) 1993, Garrett A. Wollman.
* Copyright (c) 1993, University of Vermont and State Agricultural College.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
* $FreeBSD$
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
*/
/*
* Necessary declarations for the `ddb' kernel debugger.
*/
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
#ifndef _DDB_DDB_H_
#define _DDB_DDB_H_
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Add a new DDB(4) facility, output capture. Input and output from DDB may be captured to a memory buffer for later inspection using sysctl(8), or in the future, to a textdump. A new DDB command, "capture", is added, which accepts arguments "on", "off", "reset", and "status". A new DDB sysctl tree, debug.ddb.capture, is added, which can be used to resize the capture buffer and extract buffer contents. MFC after: 3 months
2007-12-25 23:06:51 +00:00
#ifdef SYSCTL_DECL
SYSCTL_DECL(_debug_ddb);
#endif
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
#include <machine/db_machdep.h> /* type definitions */
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
#include <sys/queue.h> /* LIST_* */
#include <sys/kernel.h> /* SYSINIT */
Implement functions calls from within DDB on ia64. On ia64 a function pointer doesn't point to the first instruction of that function, but rather to a descriptor. The descriptor has the address of the first instruction, as well as the value of the global pointer. The symbol table doesn't know anything about descriptors, so if you lookup the name of a function you get the address of the first instruction. The cast from the address, which is the result of the symbol lookup, to a function pointer as is done in db_fncall is therefore invalid. Abstract this detail behind the DB_CALL macro. By default DB_CALL is defined as db_fncall_generic, which yields the old behaviour. On ia64 the macro is defined as db_fncall_ia64, in which a descriptor is constructed to yield a valid function pointer. While here, introduce DB_MAXARGS. DB_MAXARGS replaces the existing (local) MAXARGS. The DB_MAXARGS macro can be defined by platforms to create a convenient maximum. By default this will be the legacy 10. On ia64 we define this macro to be 8, for 8 is the maximum number of arguments that can be passed in registers. This avoids having to implement spilling of arguments on the memory stack. Approved by: re (dwhite)
2005-07-02 23:52:37 +00:00
#ifndef DB_MAXARGS
#define DB_MAXARGS 10
#endif
Add a simple scripting facility to DDB(4), allowing the user to define a set of named scripts. Each script consists of a list of DDB commands separated by ";"s that will be executed verbatim. No higher level language constructs, such as branching, are provided for: scripts are executed by sequentially injecting commands into the DDB input buffer. Four new commands are present in DDB: "run" to run a specific script, "script" to define or print a script, "scripts" to list currently defined scripts, and "unscript" to delete a script, modeled on shell alias commands. Scripts may also be manipulated using sysctls in the debug.ddb.scripting MIB space, although users will prefer to use the soon-to-be-added ddb(8) tool for usability reasons. Scripts with certain names are automatically executed on various DDB events, such as entering the debugger via a panic, a witness error, watchdog, breakpoint, sysctl, serial break, etc, allowing customized handling. MFC after: 3 months
2007-12-26 09:33:19 +00:00
#ifndef DB_MAXLINE
#define DB_MAXLINE 120
#endif
#ifndef DB_MAXSCRIPTS
#define DB_MAXSCRIPTS 8
#endif
#ifndef DB_MAXSCRIPTNAME
#define DB_MAXSCRIPTNAME 32
#endif
#ifndef DB_MAXSCRIPTLEN
#define DB_MAXSCRIPTLEN 128
#endif
#ifndef DB_MAXSCRIPTRECURSION
#define DB_MAXSCRIPTRECURSION 3
#endif
Implement functions calls from within DDB on ia64. On ia64 a function pointer doesn't point to the first instruction of that function, but rather to a descriptor. The descriptor has the address of the first instruction, as well as the value of the global pointer. The symbol table doesn't know anything about descriptors, so if you lookup the name of a function you get the address of the first instruction. The cast from the address, which is the result of the symbol lookup, to a function pointer as is done in db_fncall is therefore invalid. Abstract this detail behind the DB_CALL macro. By default DB_CALL is defined as db_fncall_generic, which yields the old behaviour. On ia64 the macro is defined as db_fncall_ia64, in which a descriptor is constructed to yield a valid function pointer. While here, introduce DB_MAXARGS. DB_MAXARGS replaces the existing (local) MAXARGS. The DB_MAXARGS macro can be defined by platforms to create a convenient maximum. By default this will be the legacy 10. On ia64 we define this macro to be 8, for 8 is the maximum number of arguments that can be passed in registers. This avoids having to implement spilling of arguments on the memory stack. Approved by: re (dwhite)
2005-07-02 23:52:37 +00:00
#ifndef DB_CALL
#define DB_CALL db_fncall_generic
#else
int DB_CALL(db_expr_t, db_expr_t *, int, db_expr_t[]);
#endif
ddb: allow specifying the exact address of the symtab and strtab When the FreeBSD kernel is loaded from Xen the symtab and strtab are not loaded the same way as the native boot loader. This patch adds three new global variables to ddb that can be used to specify the exact position and size of those tables, so they can be directly used as parameters to db_add_symbol_table. A new helper is introduced, so callers that used to set ksym_start and ksym_end can use this helper to set the new variables. It also adds support for loading them from the Xen PVH port, that was previously missing those tables. Sponsored by: Citrix Systems R&D Reviewed by: kib ddb/db_main.c: - Add three new global variables: ksymtab, kstrtab, ksymtab_size that can be used to specify the position and size of the symtab and strtab. - Use those new variables in db_init in order to call db_add_symbol_table. - Move the logic in db_init to db_fetch_symtab in order to set ksymtab, kstrtab, ksymtab_size from ksym_start and ksym_end. ddb/ddb.h: - Add prototype for db_fetch_ksymtab. - Declate the extern variables ksymtab, kstrtab and ksymtab_size. x86/xen/pv.c: - Add support for finding the symtab and strtab when booted as a Xen PVH guest. Since Xen loads the symtab and strtab as NetBSD expects to find them we have to adapt and use the same method. amd64/amd64/machdep.c: arm/arm/machdep.c: i386/i386/machdep.c: mips/mips/machdep.c: pc98/pc98/machdep.c: powerpc/aim/machdep.c: powerpc/booke/machdep.c: sparc64/sparc64/machdep.c: - Use the newly introduced db_fetch_ksymtab in order to set ksymtab, kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
/*
* Extern variables to set the address and size of the symtab and strtab.
* Most users should use db_fetch_symtab in order to set them from the
* boot loader provided values.
*/
extern vm_offset_t ksymtab, kstrtab, ksymtab_size;
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
/*
* There are three "command tables":
* - One for simple commands; a list of these is displayed
* by typing 'help' at the debugger prompt.
* - One for sub-commands of 'show'; to see this type 'show'
* without any arguments.
* - The last one for sub-commands of 'show all'; type 'show all'
* without any argument to get a list.
*/
struct command;
LIST_HEAD(command_table, command);
extern struct command_table db_cmd_table;
extern struct command_table db_show_table;
extern struct command_table db_show_all_table;
/*
* Type signature for a function implementing a ddb command.
*/
Fixed some style bugs in the removal of __P(()). Continuation lines were not outdented to preserve non-KNF lining up of code with parentheses. Switch to KNF formatting.
2002-03-23 11:53:03 +00:00
typedef void db_cmdfcn_t(db_expr_t addr, boolean_t have_addr, db_expr_t count,
char *modif);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
/*
* Command table entry.
*/
struct command {
char * name; /* command name */
db_cmdfcn_t *fcn; /* function to call */
int flag; /* extra info: */
#define CS_OWN 0x1 /* non-standard syntax */
#define CS_MORE 0x2 /* standard syntax, but may have other words
* at end */
#define CS_SET_DOT 0x100 /* set dot after command */
struct command_table *more; /* another level of command */
LIST_ENTRY(command) next; /* next entry in the command table */
};
/*
* Arrange for the specified ddb command to be defined and
* bound to the specified function. Commands can be defined
* in modules in which case they will be available only when
* the module is loaded.
*/
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define _DB_SET(_suffix, _name, _func, list, _flag, _more) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
static struct command __CONCAT(_name,_suffix) = { \
.name = __STRING(_name), \
.fcn = _func, \
.flag = _flag, \
.more = _more \
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
}; \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
static void __CONCAT(__CONCAT(_name,_suffix),_add)(void *arg __unused) \
{ db_command_register(&list, &__CONCAT(_name,_suffix)); } \
SYSINIT(__CONCAT(_name,_suffix), SI_SUB_KLD, SI_ORDER_ANY, \
__CONCAT(__CONCAT(_name,_suffix),_add), NULL); \
static void __CONCAT(__CONCAT(_name,_suffix),_del)(void *arg __unused) \
{ db_command_unregister(&list, &__CONCAT(_name,_suffix)); } \
SYSUNINIT(__CONCAT(_name,_suffix), SI_SUB_KLD, SI_ORDER_ANY, \
__CONCAT(__CONCAT(_name,_suffix),_del), NULL);
Clean up the way we handle auxiliary commands for a given ddb command table. Previously, the ddb code knew of each linker set of auxiliary commands and which explicit command list they were tied to. These changes add a simple command_table struct that contains both the static list of commands and the pointers for any auxiliary linker set of additional commands. This also makes it possible for other arbitrary command tables to be defined in other parts of the kernel w/o having to edit ddb itself. The DB_SET macro has also been trimmed down to just creating an entry in a linker set. A new DB_FUNC macro does what the old DB_SET did which is to not only add an entry to the linker set but also to include a function prototype for the function being added. With these changes, it's now also possible to create aliases for ddb functions using DB_SET() directly if desired.
2006-03-07 22:17:06 +00:00
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
/*
* Like _DB_SET but also create the function declaration which
* must be followed immediately by the body; e.g.
* _DB_FUNC(_cmd, panic, db_panic, db_cmd_table, 0, NULL)
* {
* ...panic implementation...
* }
*
* This macro is mostly used to define commands placed in one of
* the ddb command tables; see DB_COMMAND, etc. below.
*/
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define _DB_FUNC(_suffix, _name, _func, list, _flag, _more) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
static db_cmdfcn_t _func; \
_DB_SET(_suffix, _name, _func, list, _flag, _more); \
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
static void \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
_func(db_expr_t addr, boolean_t have_addr, db_expr_t count, char *modif)
/* common idom provided for backwards compatibility */
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define DB_FUNC(_name, _func, list, _flag, _more) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
_DB_FUNC(_cmd, _name, _func, list, _flag, _more)
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define DB_COMMAND(cmd_name, func_name) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
_DB_FUNC(_cmd, cmd_name, func_name, db_cmd_table, 0, NULL)
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define DB_ALIAS(alias_name, func_name) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
_DB_SET(_cmd, alias_name, func_name, db_cmd_table, 0, NULL)
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define DB_SHOW_COMMAND(cmd_name, func_name) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
_DB_FUNC(_show, cmd_name, func_name, db_show_table, 0, NULL)
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define DB_SHOW_ALIAS(alias_name, func_name) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
_DB_SET(_show, alias_name, func_name, db_show_table, 0, NULL)
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define DB_SHOW_ALL_COMMAND(cmd_name, func_name) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
_DB_FUNC(_show_all, cmd_name, func_name, db_show_all_table, 0, NULL)
ddb: Minor style cleanups. #define should be followed by tab. MFC after: 1 week
2014-03-31 16:37:41 +00:00
#define DB_SHOW_ALL_ALIAS(alias_name, func_name) \
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
_DB_SET(_show_all, alias_name, func_name, db_show_all_table, 0, NULL)
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
Fixed bogus type of valuep in struct db_variable. It was `int *' and became `long *' for alpha, but should always have been `db_expr_t *'. Fixed variable types to match.
1998-07-08 09:11:43 +00:00
extern db_expr_t db_maxoff;
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
extern int db_indent;
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
extern int db_inst_count;
extern int db_load_count;
extern int db_store_count;
Simplify the pager support in DDB. Allowing different db commands to install custom pager functions didn't actually happen in practice (they all just used the simple pager and passed in a local quit pointer). So, just hardcode the simple pager as the only pager and make it set a global db_pager_quit flag that db commands can check when the user hits 'q' (or a suitable variant) at the pager prompt. Also, now that it's easy to do so, enable paging by default for all ddb commands. Any command that wishes to honor the quit flag can do so by checking db_pager_quit. Note that the pager can also be effectively disabled by setting $lines to 0. Other fixes: - 'show idt' on i386 and pc98 now actually checks the quit flag and terminates early. - 'show intr' now actually checks the quit flag and terminates early.
2006-07-12 21:22:44 +00:00
extern volatile int db_pager_quit;
Fixed bogus type of valuep in struct db_variable. It was `int *' and became `long *' for alpha, but should always have been `db_expr_t *'. Fixed variable types to match.
1998-07-08 09:11:43 +00:00
extern db_expr_t db_radix;
extern db_expr_t db_max_width;
extern db_expr_t db_tab_stop_width;
- Change the ddb paging "support" to use a variable (db_lines_per_page) to control the number of lines per page rather than a constant. The variable can be examined and changed in ddb as '$lines'. Setting the variable to 0 will effectively turn off paging. - Change db_putchar() to force out pending whitespace before outputting newlines and carriage returns so that one can rub out content on the current line via '\r \r' type strings. - Change the simple pager to rub out the --More-- prompt explicitly when the routine exits. - Add some aliases to the simple pager to make it more compatible with more(1): 'e' and 'j' do a single line. 'd' does half a page, and 'f' does a full page. MFC after: 1 month Inspired by: kris
2004-11-01 22:15:15 +00:00
extern db_expr_t db_lines_per_page;
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
struct thread;
Support statically attaching of ddb commands in non-ddb modules. The details are hidden in the DB_COMMAND(cmd_name, func_name) and DB_SHOW_COMMAND(cmd_name, func_name) macros. DB_COMMAND() adds to the top-level ddb command table and DB_SHOW_COMMAND adds to the `show' subtable. Most external commands will probably be `show' commands with no side effects. They should check their pointer args more carefully than `show map' :-), or ddb should trap internal faults better (like it does for memory accesses). The vm ddb commands are temporarily unattached. ddb.h: Also declare `db_indent' and db_iprintf() which will replace vm's `indent' and iprintf().
1996-09-14 09:13:15 +00:00
struct vm_map;
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Remove __P.
2002-03-20 05:14:42 +00:00
void db_check_interrupt(void);
void db_clear_watchpoints(void);
db_addr_t db_disasm(db_addr_t loc, boolean_t altfmt);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
/* instruction disassembler */
Constify to kill some warnings.
2002-09-21 17:29:36 +00:00
void db_error(const char *s);
Remove __P.
2002-03-20 05:14:42 +00:00
int db_expression(db_expr_t *valuep);
int db_get_variable(db_expr_t *valuep);
void db_iprintf(const char *,...) __printflike(1, 2);
Add two helper functions: db_lookup_thread() and db_lookup_proc(). They take the addr value passed to a ddb command and attempt to use it to lookup a struct thread * or struct proc *, respectively. Each function first reparses the passed in value as if it was an ID entered in base 10. For threads the ID is treated as a thread ID, for proceses the ID is treated as a PID. If a thread or proc matching the ID is found, it is returned. For db_lookup_thread(), if the check_pid argument is true and it didn't find a thread with a matching thread ID, it will treat the ID as a PID and look for a matching process. If it finds one it returns the first thread in the process. If none of the ID lookups succeeded, then the functions assume that the passed in address is a thread or proc pointer, respectively. This allows one to use tids, pids, or structure pointers interchangeably in ddb functions that want to lookup threads or processes if desired.
2006-04-25 20:22:48 +00:00
struct proc *db_lookup_proc(db_expr_t addr);
struct thread *db_lookup_thread(db_expr_t addr, boolean_t check_pid);
Remove __P.
2002-03-20 05:14:42 +00:00
struct vm_map *db_map_addr(vm_offset_t);
boolean_t db_map_current(struct vm_map *);
boolean_t db_map_equal(struct vm_map *, struct vm_map *);
Move the prototypes of db_md_set_watchpoint(), db_md_clr_watchpoint() and db_md_list_watchpoints() to ddb/ddb.h.
2005-09-10 03:01:25 +00:00
int db_md_set_watchpoint(db_expr_t addr, db_expr_t size);
int db_md_clr_watchpoint(db_expr_t addr, db_expr_t size);
void db_md_list_watchpoints(void);
Remove __P.
2002-03-20 05:14:42 +00:00
void db_print_loc_and_inst(db_addr_t loc);
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
void db_print_thread(void);
There is not a good reason to have a different prototype for db_printf() when compared to printf(). Unify it by returning the number of characters displayed for db_printf() as well. MFC after: 7 days
2010-05-11 17:01:14 +00:00
int db_printf(const char *fmt, ...) __printflike(1, 2);
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
int db_read_bytes(vm_offset_t addr, size_t size, char *data);
Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
/* machine-dependent */
Remove __P.
2002-03-20 05:14:42 +00:00
int db_readline(char *lstart, int lsize);
void db_restart_at_pc(boolean_t watchpt);
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
int db_set_variable(db_expr_t value);
Remove __P.
2002-03-20 05:14:42 +00:00
void db_set_watchpoints(void);
void db_skip_to_eol(void);
boolean_t db_stop_at_pc(boolean_t *is_breakpoint);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
#define db_strcpy strcpy
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
void db_trace_self(void);
int db_trace_thread(struct thread *, int);
Remove __P.
2002-03-20 05:14:42 +00:00
int db_value_of_name(const char *name, db_expr_t *valuep);
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
int db_value_of_name_pcpu(const char *name, db_expr_t *valuep);
int db_value_of_name_vnet(const char *name, db_expr_t *valuep);
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
int db_write_bytes(vm_offset_t addr, size_t size, char *data);
Make ddb command registration dynamic so modules can extend the command set (only so long as the module is present): o add db_command_register and db_command_unregister to add and remove commands, respectively o replace linker sets with SYSINIT's (and SYSUINIT's) that register commands o expose 3 list heads: db_cmd_table, db_show_table, and db_show_all_table for registering top-level commands, show operands, and show all operands, respectively While here also: o sort command lists o add DB_ALIAS, DB_SHOW_ALIAS, and DB_SHOW_ALL_ALIAS to add aliases for existing commands o add "show all trace" as an alias for "show alltrace" o add "show all locks" as an alias for "show alllocks" Submitted by: Guillaume Ballet <gballet@gmail.com> (original version) Reviewed by: jhb MFC after: 1 month
2008-09-15 22:45:14 +00:00
void db_command_register(struct command_table *, struct command *);
void db_command_unregister(struct command_table *, struct command *);
ddb: allow specifying the exact address of the symtab and strtab When the FreeBSD kernel is loaded from Xen the symtab and strtab are not loaded the same way as the native boot loader. This patch adds three new global variables to ddb that can be used to specify the exact position and size of those tables, so they can be directly used as parameters to db_add_symbol_table. A new helper is introduced, so callers that used to set ksym_start and ksym_end can use this helper to set the new variables. It also adds support for loading them from the Xen PVH port, that was previously missing those tables. Sponsored by: Citrix Systems R&D Reviewed by: kib ddb/db_main.c: - Add three new global variables: ksymtab, kstrtab, ksymtab_size that can be used to specify the position and size of the symtab and strtab. - Use those new variables in db_init in order to call db_add_symbol_table. - Move the logic in db_init to db_fetch_symtab in order to set ksymtab, kstrtab, ksymtab_size from ksym_start and ksym_end. ddb/ddb.h: - Add prototype for db_fetch_ksymtab. - Declate the extern variables ksymtab, kstrtab and ksymtab_size. x86/xen/pv.c: - Add support for finding the symtab and strtab when booted as a Xen PVH guest. Since Xen loads the symtab and strtab as NetBSD expects to find them we have to adapt and use the same method. amd64/amd64/machdep.c: arm/arm/machdep.c: i386/i386/machdep.c: mips/mips/machdep.c: pc98/pc98/machdep.c: powerpc/aim/machdep.c: powerpc/booke/machdep.c: sparc64/sparc64/machdep.c: - Use the newly introduced db_fetch_ksymtab in order to set ksymtab, kstrtab and ksymtab_size.
2014-09-25 08:28:10 +00:00
int db_fetch_ksymtab(vm_offset_t ksym_start, vm_offset_t ksym_end);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_breakpoint_cmd;
Add a new DDB(4) facility, output capture. Input and output from DDB may be captured to a memory buffer for later inspection using sysctl(8), or in the future, to a textdump. A new DDB command, "capture", is added, which accepts arguments "on", "off", "reset", and "status". A new DDB sysctl tree, debug.ddb.capture, is added, which can be used to resize the capture buffer and extract buffer contents. MFC after: 3 months
2007-12-25 23:06:51 +00:00
db_cmdfcn_t db_capture_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_continue_cmd;
db_cmdfcn_t db_delete_cmd;
Add 'hwatch' and 'dhwatch' ddb commands analogous to 'watch' and 'dwatch'. The new commands install hardware watchpoints if supported by the architecture and if there are enough registers to cover the desired memory area. No objection by: audit@, hackers@ MFC after: 2 weeks
2001-07-11 03:15:25 +00:00
db_cmdfcn_t db_deletehwatch_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_deletewatch_cmd;
db_cmdfcn_t db_examine_cmd;
Add 'findstack' ddb command to search either the thread kernel stack or cached stack containing the specified kernel virtual address. Discussed with: pho MFC after: 1 week
2011-12-16 11:44:20 +00:00
db_cmdfcn_t db_findstack_cmd;
Add 'hwatch' and 'dhwatch' ddb commands analogous to 'watch' and 'dwatch'. The new commands install hardware watchpoints if supported by the architecture and if there are enough registers to cover the desired memory area. No objection by: audit@, hackers@ MFC after: 2 weeks
2001-07-11 03:15:25 +00:00
db_cmdfcn_t db_hwatchpoint_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_listbreak_cmd;
Add a simple scripting facility to DDB(4), allowing the user to define a set of named scripts. Each script consists of a list of DDB commands separated by ";"s that will be executed verbatim. No higher level language constructs, such as branching, are provided for: scripts are executed by sequentially injecting commands into the DDB input buffer. Four new commands are present in DDB: "run" to run a specific script, "script" to define or print a script, "scripts" to list currently defined scripts, and "unscript" to delete a script, modeled on shell alias commands. Scripts may also be manipulated using sysctls in the debug.ddb.scripting MIB space, although users will prefer to use the soon-to-be-added ddb(8) tool for usability reasons. Scripts with certain names are automatically executed on various DDB events, such as entering the debugger via a panic, a witness error, watchdog, breakpoint, sysctl, serial break, etc, allowing customized handling. MFC after: 3 months
2007-12-26 09:33:19 +00:00
db_cmdfcn_t db_scripts_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_print_cmd;
db_cmdfcn_t db_ps;
Add a simple scripting facility to DDB(4), allowing the user to define a set of named scripts. Each script consists of a list of DDB commands separated by ";"s that will be executed verbatim. No higher level language constructs, such as branching, are provided for: scripts are executed by sequentially injecting commands into the DDB input buffer. Four new commands are present in DDB: "run" to run a specific script, "script" to define or print a script, "scripts" to list currently defined scripts, and "unscript" to delete a script, modeled on shell alias commands. Scripts may also be manipulated using sysctls in the debug.ddb.scripting MIB space, although users will prefer to use the soon-to-be-added ddb(8) tool for usability reasons. Scripts with certain names are automatically executed on various DDB events, such as entering the debugger via a panic, a witness error, watchdog, breakpoint, sysctl, serial break, etc, allowing customized handling. MFC after: 3 months
2007-12-26 09:33:19 +00:00
db_cmdfcn_t db_run_cmd;
db_cmdfcn_t db_script_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_search_cmd;
db_cmdfcn_t db_set_cmd;
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
db_cmdfcn_t db_set_thread;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_show_regs;
Mega update for the KDB framework: turn DDB into a KDB backend. Most of the changes are a direct result of adding thread awareness. Typically, DDB_REGS is gone. All registers are taken from the trapframe and backtraces use the PCB based contexts. DDB_REGS was defined to be a trapframe on all platforms anyway. Thread awareness introduces the following new commands: thread X switch to thread X (where X is the TID), show threads list all threads. The backtrace code has been made more flexible so that one can create backtraces for any thread by giving the thread ID as an argument to trace. With this change, ia64 has support for breakpoints.
2004-07-10 23:47:20 +00:00
db_cmdfcn_t db_show_threads;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_single_step_cmd;
Add textdump(4) facility, which provides an alternative form of kernel dump using mechanically generated/extracted debugging output rather than a simple memory dump. Current sources of debugging output are: - DDB output capture buffer, if there is captured output to save - Kernel message buffer - Kernel configuration, if included in kernel - Kernel version string - Panic message Textdumps are stored in swap/dump partitions as with regular dumps, but are laid out as ustar files in order to allow multiple parts to be stored as a stream of sequentially written blocks. Blocks are written out in reverse order, as the size of a textdump isn't known a priori. As with regular dumps, they will be extracted using savecore(8). One new DDB(4) command is added, "textdump", which accepts "set", "unset", and "status" arguments. By default, normal kernel dumps are generated unless "textdump set" is run in order to schedule a textdump. It can be canceled using "textdump unset" to restore generation of a normal kernel dump. Several sysctls exist to configure aspects of textdumps; debug.ddb.textdump.pending can be set to check whether a textdump is pending, or set/unset in order to control whether the next kernel dump will be a textdump from userspace. While textdumps don't have to be generated as a result of a DDB script run automatically as part of a kernel panic, this is a particular useful way to use them, as instead of generating a complete memory dump, a simple transcript of an automated DDB session can be captured using the DDB output capture and textdump facilities. This can be used to generate quite brief kernel bug reports rich in debugging information but not dependent on kernel symbol tables or precisely synchronized source code. Most textdumps I generate are less than 100k including the full message buffer. Using textdumps with an interactive debugging session is also useful, with capture being enabled/disabled in order to record some but not all of the DDB session. MFC after: 3 months
2007-12-26 11:32:33 +00:00
db_cmdfcn_t db_textdump_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_trace_until_call_cmd;
db_cmdfcn_t db_trace_until_matching_cmd;
Add a simple scripting facility to DDB(4), allowing the user to define a set of named scripts. Each script consists of a list of DDB commands separated by ";"s that will be executed verbatim. No higher level language constructs, such as branching, are provided for: scripts are executed by sequentially injecting commands into the DDB input buffer. Four new commands are present in DDB: "run" to run a specific script, "script" to define or print a script, "scripts" to list currently defined scripts, and "unscript" to delete a script, modeled on shell alias commands. Scripts may also be manipulated using sysctls in the debug.ddb.scripting MIB space, although users will prefer to use the soon-to-be-added ddb(8) tool for usability reasons. Scripts with certain names are automatically executed on various DDB events, such as entering the debugger via a panic, a witness error, watchdog, breakpoint, sysctl, serial break, etc, allowing customized handling. MFC after: 3 months
2007-12-26 09:33:19 +00:00
db_cmdfcn_t db_unscript_cmd;
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
db_cmdfcn_t db_watchpoint_cmd;
db_cmdfcn_t db_write_cmd;
Add a new DDB(4) facility, output capture. Input and output from DDB may be captured to a memory buffer for later inspection using sysctl(8), or in the future, to a textdump. A new DDB command, "capture", is added, which accepts arguments "on", "off", "reset", and "status". A new DDB sysctl tree, debug.ddb.capture, is added, which can be used to resize the capture buffer and extract buffer contents. MFC after: 3 months
2007-12-25 23:06:51 +00:00
/*
* Interface between DDB and the DDB output capture facility.
*/
struct dumperinfo;
void db_capture_dump(struct dumperinfo *di);
void db_capture_enterpager(void);
void db_capture_exitpager(void);
void db_capture_write(char *buffer, u_int buflen);
void db_capture_writech(char ch);
Add a simple scripting facility to DDB(4), allowing the user to define a set of named scripts. Each script consists of a list of DDB commands separated by ";"s that will be executed verbatim. No higher level language constructs, such as branching, are provided for: scripts are executed by sequentially injecting commands into the DDB input buffer. Four new commands are present in DDB: "run" to run a specific script, "script" to define or print a script, "scripts" to list currently defined scripts, and "unscript" to delete a script, modeled on shell alias commands. Scripts may also be manipulated using sysctls in the debug.ddb.scripting MIB space, although users will prefer to use the soon-to-be-added ddb(8) tool for usability reasons. Scripts with certain names are automatically executed on various DDB events, such as entering the debugger via a panic, a witness error, watchdog, breakpoint, sysctl, serial break, etc, allowing customized handling. MFC after: 3 months
2007-12-26 09:33:19 +00:00
/*
* Interface between DDB and the script facility.
*/
void db_script_kdbenter(const char *eventname); /* KDB enter event. */
Add textdump(4) facility, which provides an alternative form of kernel dump using mechanically generated/extracted debugging output rather than a simple memory dump. Current sources of debugging output are: - DDB output capture buffer, if there is captured output to save - Kernel message buffer - Kernel configuration, if included in kernel - Kernel version string - Panic message Textdumps are stored in swap/dump partitions as with regular dumps, but are laid out as ustar files in order to allow multiple parts to be stored as a stream of sequentially written blocks. Blocks are written out in reverse order, as the size of a textdump isn't known a priori. As with regular dumps, they will be extracted using savecore(8). One new DDB(4) command is added, "textdump", which accepts "set", "unset", and "status" arguments. By default, normal kernel dumps are generated unless "textdump set" is run in order to schedule a textdump. It can be canceled using "textdump unset" to restore generation of a normal kernel dump. Several sysctls exist to configure aspects of textdumps; debug.ddb.textdump.pending can be set to check whether a textdump is pending, or set/unset in order to control whether the next kernel dump will be a textdump from userspace. While textdumps don't have to be generated as a result of a DDB script run automatically as part of a kernel panic, this is a particular useful way to use them, as instead of generating a complete memory dump, a simple transcript of an automated DDB session can be captured using the DDB output capture and textdump facilities. This can be used to generate quite brief kernel bug reports rich in debugging information but not dependent on kernel symbol tables or precisely synchronized source code. Most textdumps I generate are less than 100k including the full message buffer. Using textdumps with an interactive debugging session is also useful, with capture being enabled/disabled in order to record some but not all of the DDB session. MFC after: 3 months
2007-12-26 11:32:33 +00:00
/*
* Interface between DDB and the textdump facility.
*
* Text dump blocks are of a fixed size; textdump_block_buffer is a
* statically allocated buffer that code interacting with textdumps can use
* to prepare and hold a pending block in when calling writenextblock().
*/
#define TEXTDUMP_BLOCKSIZE 512
extern char textdump_block_buffer[TEXTDUMP_BLOCKSIZE];
void textdump_mkustar(char *block_buffer, const char *filename,
u_int size);
void textdump_restoreoff(off_t offset);
void textdump_saveoff(off_t *offsetp);
int textdump_writenextblock(struct dumperinfo *di, char *buffer);
/*
* Interface between the kernel and textdumps.
*/
extern int textdump_pending; /* Call textdump_dumpsys() instead. */
void textdump_dumpsys(struct dumperinfo *di);
Completed function declarations and/or added prototypes. Removed `extern' from prototypes. Sorted prototypes. Uniformized idempotency ifdefs.
1995-11-24 13:53:05 +00:00
#endif /* !_DDB_DDB_H_ */
Reference in New Issue Copy Permalink