2001-03-06 21:43:46 +00:00
|
|
|
|
/*-
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
* Copyright (c) 1998,1999,2000,2001,2002 S<EFBFBD>ren Schmidt <sos@FreeBSD.org>
|
2001-03-06 21:43:46 +00:00
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer,
|
|
|
|
|
* without modification, immediately at the beginning of the file.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
|
|
|
|
* $FreeBSD$
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
|
#include <sys/systm.h>
|
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
#include <sys/disk.h>
|
|
|
|
|
#include <sys/module.h>
|
|
|
|
|
#include <sys/bus.h>
|
|
|
|
|
#include <sys/bio.h>
|
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
|
#include <sys/devicestat.h>
|
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
|
#include <machine/stdarg.h>
|
|
|
|
|
#include <machine/resource.h>
|
|
|
|
|
#include <machine/bus.h>
|
|
|
|
|
#include <sys/rman.h>
|
|
|
|
|
#include <isa/isavar.h>
|
|
|
|
|
#include <dev/ata/ata-all.h>
|
|
|
|
|
|
|
|
|
|
/* local vars */
|
|
|
|
|
static struct isa_pnp_id ata_ids[] = {
|
|
|
|
|
{0x0006d041, "Generic ESDI/IDE/ATA controller"}, /* PNP0600 */
|
|
|
|
|
{0x0106d041, "Plus Hardcard II"}, /* PNP0601 */
|
|
|
|
|
{0x0206d041, "Plus Hardcard IIXL/EZ"}, /* PNP0602 */
|
|
|
|
|
{0x0306d041, "Generic ATA"}, /* PNP0603 */
|
|
|
|
|
{0}
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
ata_isa_probe(device_t dev)
|
|
|
|
|
{
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
struct ata_channel *ch = device_get_softc(dev);
|
2001-03-06 21:43:46 +00:00
|
|
|
|
struct resource *io;
|
|
|
|
|
u_long tmp;
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
int rid;
|
2001-03-06 21:43:46 +00:00
|
|
|
|
|
|
|
|
|
/* check isapnp ids */
|
|
|
|
|
if (ISA_PNP_PROBE(device_get_parent(dev), dev, ata_ids) == ENXIO)
|
|
|
|
|
return ENXIO;
|
|
|
|
|
|
|
|
|
|
/* allocate the io port range to get the start address */
|
|
|
|
|
rid = ATA_IOADDR_RID;
|
|
|
|
|
io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
|
|
|
|
|
ATA_IOSIZE, RF_ACTIVE);
|
|
|
|
|
if (!io)
|
|
|
|
|
return ENOMEM;
|
|
|
|
|
|
|
|
|
|
/* set the altport range */
|
|
|
|
|
if (bus_get_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID, &tmp, &tmp)) {
|
|
|
|
|
bus_set_resource(dev, SYS_RES_IOPORT, ATA_ALTADDR_RID,
|
|
|
|
|
rman_get_start(io) + ATA_ALTOFFSET, ATA_ALTIOSIZE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
bus_release_resource(dev, SYS_RES_IOPORT, rid, io);
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
ch->unit = 0;
|
|
|
|
|
ch->flags |= ATA_USE_16BIT;
|
2001-03-06 21:43:46 +00:00
|
|
|
|
return ata_probe(dev);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static device_method_t ata_isa_methods[] = {
|
|
|
|
|
/* device interface */
|
|
|
|
|
DEVMETHOD(device_probe, ata_isa_probe),
|
|
|
|
|
DEVMETHOD(device_attach, ata_attach),
|
|
|
|
|
DEVMETHOD(device_resume, ata_resume),
|
|
|
|
|
{ 0, 0 }
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static driver_t ata_isa_driver = {
|
|
|
|
|
"ata",
|
|
|
|
|
ata_isa_methods,
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
sizeof(struct ata_channel),
|
2001-03-06 21:43:46 +00:00
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
DRIVER_MODULE(ata, isa, ata_isa_driver, ata_devclass, 0, 0);
|
2001-03-24 16:19:07 +00:00
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* the following is a bandaid to get ISA only setups to link,
|
|
|
|
|
* since these are getting rare the ugliness is kept here
|
|
|
|
|
*/
|
|
|
|
|
#include "pci.h"
|
|
|
|
|
#if NPCI == 0
|
2002-04-05 13:13:56 +00:00
|
|
|
|
int
|
|
|
|
|
ata_dmaalloc(struct ata_device *atadev)
|
|
|
|
|
{
|
|
|
|
|
return ENXIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
ata_dmafree(struct ata_device *atadev)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
ata_dmafreetags(struct ata_channel *ch)
|
2001-03-24 16:19:07 +00:00
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
2002-04-05 13:13:56 +00:00
|
|
|
|
ata_dmainit(struct ata_device *atadev, int piomode, int wdmamode, int udmamode)
|
2001-03-24 16:19:07 +00:00
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
2002-04-05 13:13:56 +00:00
|
|
|
|
ata_dmasetup(struct ata_device *atadev, caddr_t data, int32_t count)
|
2001-03-24 16:19:07 +00:00
|
|
|
|
{
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
2002-04-18 19:11:45 +00:00
|
|
|
|
ata_dmastart(struct ata_device *atadev, caddr_t data, int32_t count, int dir)
|
2001-03-24 16:19:07 +00:00
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
2002-04-05 13:13:56 +00:00
|
|
|
|
ata_dmadone(struct ata_device *atadev)
|
2001-03-24 16:19:07 +00:00
|
|
|
|
{
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
ata_dmastatus(struct ata_channel *ch)
|
2001-03-24 16:19:07 +00:00
|
|
|
|
{
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
#endif
|