d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d78994fa55
freebsd-skq/sys/netinet/sctp_auth.h

231 lines
8.5 KiB
C
Raw Normal View History

Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*-
sys: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 3-Clause license. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Special thanks to Wind River for providing access to "The Duke of Highlander" tool: an older (2014) run over FreeBSD tree was useful as a starting point.
2017-11-20 19:43:44 +00:00
* SPDX-License-Identifier: BSD-3-Clause
*
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
* Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved.
Use consistent text at the begining of the files. MFC after: 3 days
2012-05-23 11:26:28 +00:00
* Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
* Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
* this list of conditions and the following disclaimer.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
Fix unused parameter warnings. While there, fix some whitespace issues. MFC after: 3 months.
2011-12-17 19:21:40 +00:00
* the documentation and/or other materials provided with the distribution.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Use consistent text at the begining of the files. MFC after: 3 days
2012-05-23 11:26:28 +00:00
#ifndef _NETINET_SCTP_AUTH_H_
#define _NETINET_SCTP_AUTH_H_
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
All changes affect only SCTP-AUTH: * Remove non working code related to SHA224. * Remove support for non-standardised HMAC-IDs using SHA384 and SHA512. * Prefer SHA256 over SHA1. * Minor cleanup. MFC after: 2 weeks
2013-09-02 22:48:41 +00:00
#include <netinet/sctp_os.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* digest lengths */
#define SCTP_AUTH_DIGEST_LEN_SHA1 20
#define SCTP_AUTH_DIGEST_LEN_SHA256 32
All changes affect only SCTP-AUTH: * Remove non working code related to SHA224. * Remove support for non-standardised HMAC-IDs using SHA384 and SHA512. * Prefer SHA256 over SHA1. * Minor cleanup. MFC after: 2 weeks
2013-09-02 22:48:41 +00:00
#define SCTP_AUTH_DIGEST_LEN_MAX SCTP_AUTH_DIGEST_LEN_SHA256
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* random sizes */
#define SCTP_AUTH_RANDOM_SIZE_DEFAULT 32
#define SCTP_AUTH_RANDOM_SIZE_REQUIRED 32
/* union of all supported HMAC algorithm contexts */
typedef union sctp_hash_context {
All changes affect only SCTP-AUTH: * Remove non working code related to SHA224. * Remove support for non-standardised HMAC-IDs using SHA384 and SHA512. * Prefer SHA256 over SHA1. * Minor cleanup. MFC after: 2 weeks
2013-09-02 22:48:41 +00:00
SCTP_SHA1_CTX sha1;
SCTP_SHA256_CTX sha256;
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
} sctp_hash_context_t;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
typedef struct sctp_key {
uint32_t keylen;
Use [] instead of [0] for flexible arrays. Obtained from: Bruce Cran MFC after: 1 week
2010-01-22 07:53:41 +00:00
uint8_t key[];
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
} sctp_key_t;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
typedef struct sctp_shared_key {
LIST_ENTRY(sctp_shared_key) next;
sctp_key_t *key; /* key text */
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
uint32_t refcount; /* reference count */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint16_t keyid; /* shared key ID */
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
uint8_t deactivated; /* key is deactivated */
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
} sctp_sharedkey_t;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
LIST_HEAD(sctp_keyhead, sctp_shared_key);
/* authentication chunks list */
typedef struct sctp_auth_chklist {
uint8_t chunks[256];
uint8_t num_chunks;
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
} sctp_auth_chklist_t;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* hmac algos supported list */
typedef struct sctp_hmaclist {
uint16_t max_algo; /* max algorithms allocated */
uint16_t num_algo; /* num algorithms used */
Use [] instead of [0] for flexible arrays. Obtained from: Bruce Cran MFC after: 1 week
2010-01-22 07:53:41 +00:00
uint16_t hmac[];
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
} sctp_hmaclist_t;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* authentication info */
Change the name of an internal structure, since the name is used by a structure of the (new) SCTP API. MFC after: 1 week.
2011-05-06 20:40:33 +00:00
typedef struct sctp_authinformation {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_key_t *random; /* local random key (concatenated) */
uint32_t random_len; /* local random number length for param */
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
sctp_key_t *peer_random; /* peer's random key (concatenated) */
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_key_t *assoc_key; /* cached concatenated send key */
sctp_key_t *recv_key; /* cached concatenated recv key */
uint16_t active_keyid; /* active send keyid */
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint16_t assoc_keyid; /* current send keyid (cached) */
uint16_t recv_keyid; /* last recv keyid (cached) */
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
} sctp_authinfo_t;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* Macros
*/
#define sctp_auth_is_required_chunk(chunk, list) ((list == NULL) ? (0) : (list->chunks[chunk] != 0))
/*
* function prototypes
*/
/* socket option api functions */
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
extern sctp_auth_chklist_t *sctp_alloc_chunklist(void);
extern void sctp_free_chunklist(sctp_auth_chklist_t *chklist);
extern void sctp_clear_chunklist(sctp_auth_chklist_t *chklist);
extern sctp_auth_chklist_t *sctp_copy_chunklist(sctp_auth_chklist_t *chklist);
extern int sctp_auth_add_chunk(uint8_t chunk, sctp_auth_chklist_t *list);
extern int sctp_auth_delete_chunk(uint8_t chunk, sctp_auth_chklist_t *list);
extern size_t sctp_auth_get_chklist_size(const sctp_auth_chklist_t *list);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern int
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_serialize_auth_chunks(const sctp_auth_chklist_t *list,
uint8_t *ptr);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern int
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_pack_auth_chunks(const sctp_auth_chklist_t *list,
uint8_t *ptr);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern int
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_unpack_auth_chunks(const uint8_t *ptr, uint8_t num_chunks,
sctp_auth_chklist_t *list);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* key handling */
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
extern sctp_key_t *sctp_alloc_key(uint32_t keylen);
extern void sctp_free_key(sctp_key_t *key);
extern void sctp_print_key(sctp_key_t *key, const char *str);
extern void sctp_show_key(sctp_key_t *key, const char *str);
extern sctp_key_t *sctp_generate_random_key(uint32_t keylen);
extern sctp_key_t *sctp_set_key(uint8_t *key, uint32_t keylen);
extern sctp_key_t *
sctp_compute_hashkey(sctp_key_t *key1, sctp_key_t *key2,
sctp_key_t *shared);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* shared key handling */
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
extern sctp_sharedkey_t *sctp_alloc_sharedkey(void);
extern void sctp_free_sharedkey(sctp_sharedkey_t *skey);
extern sctp_sharedkey_t *
sctp_find_sharedkey(struct sctp_keyhead *shared_keys,
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
uint16_t key_id);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern int
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_insert_sharedkey(struct sctp_keyhead *shared_keys,
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_sharedkey_t *new_skey);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern int
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_copy_skeylist(const struct sctp_keyhead *src,
struct sctp_keyhead *dest);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
/* ref counts on shared keys, by key id */
extern void sctp_auth_key_acquire(struct sctp_tcb *stcb, uint16_t keyid);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern void
Fix a locking issue showing up on Mac OS X when subscribing to authentication events. DTLS/SCTP renegotiations trigger the bug. MFC after: 2 weeks.
2011-05-08 09:11:59 +00:00
sctp_auth_key_release(struct sctp_tcb *stcb, uint16_t keyid,
int so_locked);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* hmac list handling */
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
extern sctp_hmaclist_t *sctp_alloc_hmaclist(uint16_t num_hmacs);
extern void sctp_free_hmaclist(sctp_hmaclist_t *list);
extern int sctp_auth_add_hmacid(sctp_hmaclist_t *list, uint16_t hmac_id);
extern sctp_hmaclist_t *sctp_copy_hmaclist(sctp_hmaclist_t *list);
extern sctp_hmaclist_t *sctp_default_supported_hmaclist(void);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern uint16_t
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_negotiate_hmacid(sctp_hmaclist_t *peer,
sctp_hmaclist_t *local);
extern int sctp_serialize_hmaclist(sctp_hmaclist_t *list, uint8_t *ptr);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern int
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_verify_hmac_param(struct sctp_auth_hmac_algo *hmacs,
uint32_t num_hmacs);
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
extern sctp_authinfo_t *sctp_alloc_authinfo(void);
extern void sctp_free_authinfo(sctp_authinfo_t *authinfo);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* keyed-HMAC functions */
extern uint32_t sctp_get_auth_chunk_len(uint16_t hmac_algo);
extern uint32_t sctp_get_hmac_digest_len(uint16_t hmac_algo);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern uint32_t
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_hmac(uint16_t hmac_algo, uint8_t *key, uint32_t keylen,
uint8_t *text, uint32_t textlen, uint8_t *digest);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern uint32_t
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_compute_hmac(uint16_t hmac_algo, sctp_key_t *key,
uint8_t *text, uint32_t textlen, uint8_t *digest);
extern int sctp_auth_is_supported_hmac(sctp_hmaclist_t *list, uint16_t id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* mbuf versions */
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern uint32_t
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_hmac_m(uint16_t hmac_algo, uint8_t *key, uint32_t keylen,
struct mbuf *m, uint32_t m_offset, uint8_t *digest, uint32_t trailer);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern uint32_t
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
sctp_compute_hmac_m(uint16_t hmac_algo, sctp_key_t *key,
struct mbuf *m, uint32_t m_offset, uint8_t *digest);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* authentication routines
*/
extern void sctp_clear_cachedkeys(struct sctp_tcb *stcb, uint16_t keyid);
extern void sctp_clear_cachedkeys_ep(struct sctp_inpcb *inp, uint16_t keyid);
extern int sctp_delete_sharedkey(struct sctp_tcb *stcb, uint16_t keyid);
extern int sctp_delete_sharedkey_ep(struct sctp_inpcb *inp, uint16_t keyid);
extern int sctp_auth_setactivekey(struct sctp_tcb *stcb, uint16_t keyid);
extern int sctp_auth_setactivekey_ep(struct sctp_inpcb *inp, uint16_t keyid);
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
extern int sctp_deact_sharedkey(struct sctp_tcb *stcb, uint16_t keyid);
extern int sctp_deact_sharedkey_ep(struct sctp_inpcb *inp, uint16_t keyid);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern void
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_auth_get_cookie_params(struct sctp_tcb *stcb, struct mbuf *m,
uint32_t offset, uint32_t length);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern void
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_fill_hmac_digest_m(struct mbuf *m, uint32_t auth_offset,
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctp_auth_chunk *auth, struct sctp_tcb *stcb, uint16_t key_id);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
extern struct mbuf *
sctp_add_auth_chunk(struct mbuf *m, struct mbuf **m_end,
Revert https://svnweb.freebsd.org/changeset/base/336503 since I also ran the export script with different parameters.
2018-07-19 20:11:14 +00:00
struct sctp_auth_chunk **auth_ret, uint32_t *offset,
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
struct sctp_tcb *stcb, uint8_t chunk);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern int
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_handle_auth(struct sctp_tcb *stcb, struct sctp_auth_chunk *ch,
struct mbuf *m, uint32_t offset);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern void
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_notify_authentication(struct sctp_tcb *stcb,
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
uint32_t indication, uint16_t keyid, uint16_t alt_keyid, int so_locked);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern int
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_validate_init_auth_params(struct mbuf *m, int offset,
int limit);
Whitespace changes due to changes in ident.
2018-07-19 20:16:33 +00:00
extern void
Code from the hack-session known as the IETF (and a bit of debugging afterwards): - Fix protection code for notification generation. - Decouple associd from vtag - Allow vtags to have less strigent requirements in non-uniqueness. o don't pre-hash them when you issue one in a cookie. o Allow duplicates and use addresses and ports to discriminate amongst the duplicates during lookup. - Add support for the NAT draft draft-ietf-behave-sctpnat-00, this is still experimental and needs more extensive testing with the Jason Butt ipfw changes. - Support for the SENDER_DRY event to get DTLS in OpenSSL working with a set of patches from Michael Tuexen (hopefully heading to OpenSSL soon). - Update the support of SCTP-AUTH by Peter Lei. - Use macros for refcounting. - Fix MTU for UDP encapsulation. - Fix reporting back of unsent data. - Update assoc send counter handling to be consistent with endpoint sent counter. - Fix a bug in PR-SCTP. - Fix so we only send another FWD-TSN when a SACK arrives IF and only if the adv-peer-ack point progressed. However we still make sure a timer is running if we do have an adv_peer_ack point. - Fix PR-SCTP bug where chunks were retransmitted if they are sent unreliable but not abandoned yet. With the help of: Michael Teuxen and Peter Lei :-) MFC after: 4 weeks
2008-12-06 13:19:54 +00:00
sctp_initialize_auth_params(struct sctp_inpcb *inp,
struct sctp_tcb *stcb);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* test functions */
#endif /* __SCTP_AUTH_H__ */
Reference in New Issue Copy Permalink