freebsd-skq/sys/dev/mps/mps_sas.h

176 lines
5.2 KiB
C
Raw Normal View History

/*-
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2015 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
struct mps_fw_event_work;
struct mpssas_lun {
SLIST_ENTRY(mpssas_lun) lun_link;
lun_id_t lun_id;
uint8_t eedp_formatted;
uint32_t eedp_block_size;
};
struct mpssas_target {
uint16_t handle;
uint8_t linkrate;
uint64_t devname;
uint32_t devinfo;
uint16_t encl_handle;
uint16_t encl_slot;
uint8_t flags;
#define MPSSAS_TARGET_INABORT (1 << 0)
#define MPSSAS_TARGET_INRESET (1 << 1)
#define MPSSAS_TARGET_INDIAGRESET (1 << 2)
#define MPSSAS_TARGET_INREMOVAL (1 << 3)
Bring in a number of mps(4) driver fixes from LSI: 1. Fixed timeout specification for the msleep in mps_wait_command(). Added 30 second timeout for mps_wait_command() calls in mps_user.c. 2. Make sure we call mps_detach_user() from the kldunload path. 3. Raid Hotplug behavior change. The driver now removes a volume when it goes to a failed state, so we also need to add volume back to the OS when it goes to opitimal/degraded/online from failed/missing. Handle raid volume add and remove from the IR_Volume event. 4. Added some more debugging information. 5. Replace xpt_async(AC_LOST_DEVICE, path, NULL) with mpssas_rescan_target(). This is to work around a panic in CAM that shows up when adding a drive with a rescan and removing another device from the driver thread with an AC_LOST_DEVICE async notification. This problem was encountered in testing with the LSI sas2ircu utility, which was used to create a RAID volume from physical disks. The driver has to create the RAID volume target and remove the physical disk targets, and triggered a panic in the process. The CAM issue needs to be fully diagnosed and fixed, but this works around the issue for now. 6. Fix some memory initialization issues in mps_free_command(). 7. Resolve the "devq freeze forever" issue. This was caused by the internal read capacity command issued in the non-head version of the driver. When the command completed with an error, the driver wasn't unfreezing thd device queue. The version in head uses the CAM infrastructure for getting the read capacity information, and therefore doesn't have the same issue. 8. Bump the version to 13.00.00.00-fbsd. (this is very close to LSI's internal stable driver 13.00.00.00) Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com> MFC after: 3 days
2012-02-09 00:16:12 +00:00
#define MPS_TARGET_FLAGS_RAID_COMPONENT (1 << 4)
#define MPS_TARGET_FLAGS_VOLUME (1 << 5)
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
#define MPS_TARGET_IS_SATA_SSD (1 << 6)
#define MPSSAS_TARGET_INRECOVERY (MPSSAS_TARGET_INABORT | \
MPSSAS_TARGET_INRESET | MPSSAS_TARGET_INCHIPRESET)
Bring in a number of mps(4) driver fixes from LSI: 1. Fixed timeout specification for the msleep in mps_wait_command(). Added 30 second timeout for mps_wait_command() calls in mps_user.c. 2. Make sure we call mps_detach_user() from the kldunload path. 3. Raid Hotplug behavior change. The driver now removes a volume when it goes to a failed state, so we also need to add volume back to the OS when it goes to opitimal/degraded/online from failed/missing. Handle raid volume add and remove from the IR_Volume event. 4. Added some more debugging information. 5. Replace xpt_async(AC_LOST_DEVICE, path, NULL) with mpssas_rescan_target(). This is to work around a panic in CAM that shows up when adding a drive with a rescan and removing another device from the driver thread with an AC_LOST_DEVICE async notification. This problem was encountered in testing with the LSI sas2ircu utility, which was used to create a RAID volume from physical disks. The driver has to create the RAID volume target and remove the physical disk targets, and triggered a panic in the process. The CAM issue needs to be fully diagnosed and fixed, but this works around the issue for now. 6. Fix some memory initialization issues in mps_free_command(). 7. Resolve the "devq freeze forever" issue. This was caused by the internal read capacity command issued in the non-head version of the driver. When the command completed with an error, the driver wasn't unfreezing thd device queue. The version in head uses the CAM infrastructure for getting the read capacity information, and therefore doesn't have the same issue. 8. Bump the version to 13.00.00.00-fbsd. (this is very close to LSI's internal stable driver 13.00.00.00) Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com> MFC after: 3 days
2012-02-09 00:16:12 +00:00
uint16_t tid;
SLIST_HEAD(, mpssas_lun) luns;
TAILQ_HEAD(, mps_command) commands;
struct mps_command *tm;
TAILQ_HEAD(, mps_command) timedout_commands;
uint16_t exp_dev_handle;
uint16_t phy_num;
uint64_t sasaddr;
uint16_t parent_handle;
uint64_t parent_sasaddr;
uint32_t parent_devinfo;
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
TAILQ_ENTRY(mpssas_target) sysctl_link;
uint64_t issued;
uint64_t completed;
unsigned int outstanding;
unsigned int timeouts;
unsigned int aborts;
unsigned int logical_unit_resets;
unsigned int target_resets;
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
uint8_t stop_at_shutdown;
uint8_t supports_SSU;
};
struct mpssas_softc {
struct mps_softc *sc;
u_int flags;
#define MPSSAS_IN_DISCOVERY (1 << 0)
#define MPSSAS_IN_STARTUP (1 << 1)
#define MPSSAS_DISCOVERY_TIMEOUT_PENDING (1 << 2)
#define MPSSAS_QUEUE_FROZEN (1 << 3)
#define MPSSAS_SHUTDOWN (1 << 4)
u_int maxtargets;
struct mpssas_target *targets;
struct cam_devq *devq;
struct cam_sim *sim;
struct cam_path *path;
struct intr_config_hook sas_ich;
struct callout discovery_callout;
struct mps_event_handle *mpssas_eh;
u_int startup_refcount;
struct proc *sysctl_proc;
struct taskqueue *ev_tq;
struct task ev_task;
TAILQ_HEAD(, mps_fw_event_work) ev_queue;
};
MALLOC_DECLARE(M_MPSSAS);
/*
* Abstracted so that the driver can be backwards and forwards compatible
* with future versions of CAM that will provide this functionality.
*/
#define MPS_SET_LUN(lun, ccblun) \
mpssas_set_lun(lun, ccblun)
static __inline int
mpssas_set_lun(uint8_t *lun, u_int ccblun)
{
uint64_t *newlun;
newlun = (uint64_t *)lun;
*newlun = 0;
if (ccblun <= 0xff) {
/* Peripheral device address method, LUN is 0 to 255 */
lun[1] = ccblun;
} else if (ccblun <= 0x3fff) {
/* Flat space address method, LUN is <= 16383 */
scsi_ulto2b(ccblun, lun);
lun[0] |= 0x40;
} else if (ccblun <= 0xffffff) {
/* Extended flat space address method, LUN is <= 16777215 */
scsi_ulto3b(ccblun, &lun[1]);
/* Extended Flat space address method */
lun[0] = 0xc0;
/* Length = 1, i.e. LUN is 3 bytes long */
lun[0] |= 0x10;
/* Extended Address Method */
lun[0] |= 0x02;
} else {
return (EINVAL);
}
return (0);
}
static __inline void
mpssas_set_ccbstatus(union ccb *ccb, int status)
{
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= status;
}
static __inline int
mpssas_get_ccbstatus(union ccb *ccb)
{
return (ccb->ccb_h.status & CAM_STATUS_MASK);
}
#define MPS_SET_SINGLE_LUN(req, lun) \
do { \
bzero((req)->LUN, 8); \
(req)->LUN[1] = lun; \
} while(0)
void mpssas_rescan_target(struct mps_softc *sc, struct mpssas_target *targ);
void mpssas_discovery_end(struct mpssas_softc *sassc);
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
void mpssas_prepare_for_tm(struct mps_softc *sc, struct mps_command *tm,
struct mpssas_target *target, lun_id_t lun_id);
void mpssas_startup_increment(struct mpssas_softc *sassc);
void mpssas_startup_decrement(struct mpssas_softc *sassc);
void mpssas_firmware_event_work(void *arg, int pending);
int mpssas_check_id(struct mpssas_softc *sassc, int id);