freebsd-skq/sys/conf/Makefile.i386

# Makefile.i386 -- with config changes.
# Copyright 1990 W. Jolitz
#	from: @(#)Makefile.i386	7.1 5/10/91
# $FreeBSD$
#
# Makefile for FreeBSD
#
# This makefile is constructed from a machine description:
#	config machineid
# Most changes should be made in the machine description
#	/sys/i386/conf/``machineid''
# after which you should do
#	 config machineid
# Generic makefile changes should be made in
#	/sys/conf/Makefile.i386
# after which config should be rerun for all machines.
#

# Which version of config(8) is required.
%VERSREQ=	600006

STD8X16FONT?=	iso

.if !defined(S)
.if exists(./@/.)
S=	./@
.else
S=	../../..
.endif
.endif
.include "$S/conf/kern.pre.mk"

MACHINE=i386

MKMODULESENV+=	MACHINE=${MACHINE}

%BEFORE_DEPEND

%OBJS

%FILES.c

%FILES.s

%FILES.m

%CLEAN

%RULES

.include "$S/conf/kern.post.mk"
Bring back the `config file in the kernel' feature from the 1.x days. This is conditionalized by the INCLUDE_CONFIG_FILE option in your kernel config file and is not turned on by default. Submitted-By: Bill Pechter <pechter@shell.monmouth.com> 1996-06-08 23:27:16 +00:00			`# Makefile.i386 -- with config changes.`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`# Copyright 1990 W. Jolitz`
This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$. Added STRIP=, DBSYM=, and LOAD_ADDRESS?= Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to cut kernel size. Added machde.o: dependency, this will be needed in the future, and for now it does not hurt anyone. Cleaned out conf.o: dependency, mkdep does the right things. Same for param.c: This is really a Merge in of NetBSD's Makefile.i386, here is the relevant rlog info: ---------------------------- revision 1.27 date: 1993/08/27 23:58:20; author: brezak; state: Exp; lines: +2 -2 Need LOAD_ADDRESS for depend pass. ---------------------------- revision 1.25 date: 1993/07/19 16:52:16; author: mycroft; state: Exp; lines: +3 -3 Add ${DEBUG} to CFLAGS and -f to dbsym. ---------------------------- revision 1.22 date: 1993/07/18 10:08:22; author: mycroft; state: Exp; lines: +5 -6 Change to work with new config stuff for specifying load address. ---------------------------- revision 1.20 date: 1993/07/18 09:47:40; author: mycroft; state: Exp; lines: +6 -5 Use new -T option to dbsym. ---------------------------- revision 1.17 date: 1993/07/11 08:42:22; author: cgd; state: Exp; lines: +2 -2 don't ignore errors from dbsym... it might say that, e.g. there's not enough symbol space! ---------------------------- revision 1.14 date: 1993/06/06 23:29:03; author: cgd; state: Exp; lines: +2 -2 make conf.o actually depend on conf.c... ---------------------------- revision 1.8 date: 1993/04/29 03:27:39; author: cgd; state: Exp; lines: +5 -10 use ed instead of ex. the script to use is identical, and we might want to switch back to using ex when our ex supports -. ---------------------------- revision 1.5 date: 1993/03/24 18:48:57; author: cgd; state: Exp; lines: +1 -1 now use absolute path for dbsym ---------------------------- 1993-09-26 19:44:33 +00:00			`# from: @(#)Makefile.i386 7.1 5/10/91`
$Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00			`# $FreeBSD$`
This Makefile is for FreeBSD, not 4.3 BSD-Reno. Moved $Id$. Added STRIP=, DBSYM=, and LOAD_ADDRESS?= Now use LOAD_ADDRESS for linking kernel and for dbsym, added strip -x to cut kernel size. Added machde.o: dependency, this will be needed in the future, and for now it does not hurt anyone. Cleaned out conf.o: dependency, mkdep does the right things. Same for param.c: This is really a Merge in of NetBSD's Makefile.i386, here is the relevant rlog info: ---------------------------- revision 1.27 date: 1993/08/27 23:58:20; author: brezak; state: Exp; lines: +2 -2 Need LOAD_ADDRESS for depend pass. ---------------------------- revision 1.25 date: 1993/07/19 16:52:16; author: mycroft; state: Exp; lines: +3 -3 Add ${DEBUG} to CFLAGS and -f to dbsym. ---------------------------- revision 1.22 date: 1993/07/18 10:08:22; author: mycroft; state: Exp; lines: +5 -6 Change to work with new config stuff for specifying load address. ---------------------------- revision 1.20 date: 1993/07/18 09:47:40; author: mycroft; state: Exp; lines: +6 -5 Use new -T option to dbsym. ---------------------------- revision 1.17 date: 1993/07/11 08:42:22; author: cgd; state: Exp; lines: +2 -2 don't ignore errors from dbsym... it might say that, e.g. there's not enough symbol space! ---------------------------- revision 1.14 date: 1993/06/06 23:29:03; author: cgd; state: Exp; lines: +2 -2 make conf.o actually depend on conf.c... ---------------------------- revision 1.8 date: 1993/04/29 03:27:39; author: cgd; state: Exp; lines: +5 -10 use ed instead of ex. the script to use is identical, and we might want to switch back to using ex when our ex supports -. ---------------------------- revision 1.5 date: 1993/03/24 18:48:57; author: cgd; state: Exp; lines: +1 -1 now use absolute path for dbsym ---------------------------- 1993-09-26 19:44:33 +00:00			`#`
			`# Makefile for FreeBSD`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`#`
			`# This makefile is constructed from a machine description:`
			`# config machineid`
			`# Most changes should be made in the machine description`
			# /sys/i386/conf/``machineid''
			`# after which you should do`
			`# config machineid`
			`# Generic makefile changes should be made in`
Finish the asbestos suited move of $mach/conf/.$mach to conf/.$mach. Fix some more typos. 2001-10-26 10:33:45 +00:00			`# /sys/conf/Makefile.i386`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`# after which config should be rerun for all machines.`
			`#`
Make the necessary changes so that an ELF kernel can be built. I have successfully built, booted, and run a number of different ELF kernel configurations, including GENERIC. LINT also builds and links cleanly, though I have not tried to boot it. The impact on developers is virtually nil, except for two things. All linker sets that might possibly be present in the kernel must be listed in "sys/i386/i386/setdefs.h". And all C symbols that are also referenced from assembly language code must be listed in "sys/i386/include/asnames.h". It so happens that failure to do these things will have no impact on the a.out kernel. But it will break the build of the ELF kernel. The ELF bootloader works, but it is not ready to commit quite yet. 1997-04-22 06:55:47 +00:00
Put in an initial %VERSREQ field. This will cause existing config(8)'s to give a non-fatal warning about unknown directives, so there is no hurry to rebuild config(8) yet, apart from shutting up the warning. 1997-10-22 00:48:36 +00:00			`# Which version of config(8) is required.`
Bump config(8) version and build requirement for config(8) to 600006. This is caused by my latest changes to config(8). You're supposed to install new config(8) in order to prevent yourself from seeing a warning about old version of that tool. You should configure the kernel with a new config(8) then. Oked by: rwatson, cognet (mentor) 2007-05-13 02:36:41 +00:00			`%VERSREQ= 600006`
Put in an initial %VERSREQ field. This will cause existing config(8)'s to give a non-fatal warning about unknown directives, so there is no hurry to rebuild config(8) yet, apart from shutting up the warning. 1997-10-22 00:48:36 +00:00
Add option for compiling in a 8x16 font. 1997-07-25 11:53:30 +00:00			`STD8X16FONT?= iso`

Allow the source root `S' to be overridden by defining it only when it isn't already defined. It enables config(8) to create the kernel build directory where it wants. 1999-10-30 09:28:27 +00:00			`.if !defined(S)`
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make 1994-08-13 03:50:34 +00:00			`.if exists(./@/.)`
			`S= ./@`
			`.else`
Move kernel compile directory from sys/compile/FOO to sys/compile/${MACHINE}/FOO. Reviewed by: arch, obrien, peter and the USENIX terminal room secret kernel cabal 2001-06-30 06:29:47 +00:00			`S= ../../..`
Change all #includes to follow the current Berkeley style. Some of these ``changes'' are actually not changes at all, but CVS sometimes has trouble telling the difference. This also includes support for second-directory compiles. This is not quite complete yet, as `config' doesn't yet do the right thing. You can still make it work trivially, however, by doing the following: rm /sys/compile mkdir /usr/obj/sys/compile ln -s M-. /sys/compile cd /sys/i386/conf config MYKERNEL cd ../../compile/MYKERNEL ln -s /sys @ rm machine ln -s @/i386/include machine make depend make 1994-08-13 03:50:34 +00:00			`.endif`
Allow the source root `S' to be overridden by defining it only when it isn't already defined. It enables config(8) to create the kernel build directory where it wants. 1999-10-30 09:28:27 +00:00			`.endif`
Factor the common parts of the Makefile.foo files. This introduces two new files: kern.pre.mk, which contains most of the definitions, and kern.post.mk, which contains most of the rules. I've tested this on i386 and pc98. I have had feedback on the sparc64 port, but no reports from anybody on alpha, ia64 or powerpc. I appologize in advance if I've broken you. Reviewed by: jake, jhb, arch@ 2001-11-02 21:34:20 +00:00			`.include "$S/conf/kern.pre.mk"`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
Set MACHINE to i386(pc98). This fixes cross-building. 2006-01-29 03:32:19 +00:00			`MACHINE=i386`

			`MKMODULESENV+= MACHINE=${MACHINE}`
Added 'MACHINE=i386' to MKMODULESENV variable. This enables to make modules for PC/AT on PC-98 boxes. MFC after: 3 weeks 2002-01-14 12:48:18 +00:00
Handle the aic7770 driver's dependancies correctly. YOU MUST REBUILD CONFIG. 1994-12-31 19:27:29 +00:00			`%BEFORE_DEPEND`

Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`%OBJS`

Make the xxxFILES= list generation generic. This makes it easier to add things like MFILES= or CONFFILES= without having to modify config code. 2000-11-25 03:25:34 +00:00			`%FILES.c`
Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00
Make the xxxFILES= list generation generic. This makes it easier to add things like MFILES= or CONFFILES= without having to modify config code. 2000-11-25 03:25:34 +00:00			`%FILES.s`
Use the new config(8) %SFILES token to auto-generate the SFILES list. Note: THIS REQUIRES THAT YOU REBUILD CONFIG(8)!!! 1995-10-29 11:10:53 +00:00
Make the xxxFILES= list generation generic. This makes it easier to add things like MFILES= or CONFFILES= without having to modify config code. 2000-11-25 03:25:34 +00:00			`%FILES.m`
Reviewed by: Doug Rabson Submitted by: nsouch Adding I2C and SMB entries to LINT, CONFIGVERS modified in Makefile.i386 1998-09-03 20:58:34 +00:00
Fix "dependency" spelling error. Implement "clean" entries for device config entries. Add clean rules to aic7xxx and aic7xxx_seq.h. Submitted by: Pointed out by Bruce Evans <bde@zeta.org.au> 1995-03-01 10:08:07 +00:00			`%CLEAN`

Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00			`%RULES`
s/PCCARD_/PCMCIA_/g in NEWCARD device tables to enable easier NetBSD sharing 2001-11-11 20:17:10 +00:00
			`.include "$S/conf/kern.post.mk"`