d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dacec3e8f2
freebsd-skq/usr.sbin/ypserv/Makefile.yp

584 lines
18 KiB
Makefile
Raw Normal View History

Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
#
# Makefile for the NIS databases
#
Modify yp_mkdb so that it only checks for bogus '+' and '-' characters in source input if the -f flag is used, and modify Makefile.yp to only use -f for the passwd, master.passwd and group maps. These should be the only ones for which the + and - characters have special meaning that make it important for us to avoid letting them into any of the map databases. In some cases (namely the automounter maps) we have to allow at least the - character through in order to create the map properly. This closes PR #8699.
1999-08-22 15:34:47 +00:00
# $Id: Makefile.yp,v 1.26 1999/06/24 17:19:35 n_hibma Exp $
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
#
# This Makefile should only be run on the NIS master server of a domain.
# All updated maps will be pushed to all NIS slave servers listed in the
# /var/yp/ypservers file. Please make sure that the hostnames of all
# NIS servers in your domain are listed in /var/yp/ypservers.
#
# This Makefile can be modified to support more NIS maps if desired.
#
# If this machine is an NIS master, comment out this next line so
# that changes to the NIS maps can be propagated to the slave servers.
# (By default we assume that we are only serving a small domain with
# only one server.)
#
NOPUSH = "True"
# If you want to use a FreeBSD NIS server to serve non-FreeBSD clients
# (i.e. clients who expect the password field in the passwd maps to be
# valid) then uncomment this line. This will cause $YPDIR/passwd to
# be generated with valid password fields. This is insecure: FreeBSD
# normally only serves the master.passwd maps (which have real encrypted
# passwords in them) to the superuser on other FreeBSD machines, but
# non-FreeBSD clients (e.g. SunOS, Solaris (without NIS+), IRIX, HP-UX,
# etc...) will only work properly in 'unsecure' mode.
#
#UNSECURE = "True"
Add support for handling the YP_SECURE and YP_INTERDOMAIN keys from any maps that may have them. If the YP_SECURE key is present, ypserv will only allow access to the map from clients on reserved ports. If the YP_INTERDOMAIN key is present, the server will do DNS lookups for hostnames that it can't find in hosts.byname or hosts.byaddr. This is the same as the -d flag (which is retained for backwards compatibility) but it can be set on a per-map/per-domain basis. Also modified /var/yp/Makefile to add YP_INTERDOMAIN to the hosts.* maps and YP_SECURE to master.passwd.* maps by default.
1996-10-24 18:58:26 +00:00
# The following line encodes the YP_INTERDOMAIN key into the hosts.byname
# and hosts.byaddr maps so that ypserv(8) will do DNS lookups to resolve
# hosts not in the current domain. Commenting this line out will disable
# the DNS lookups.
B=-b
# Normally, the master.passwd.* maps are guarded against access from
# non-privileged users. By commenting out the following line, the YP_SECURE
# key will be removed from these maps, allowing anyone to access them.
S=-s
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
# These are commands which this Makefile needs to properly rebuild the
# NIS databases. Don't change these unless you have a good reason. Also
# be sure not to place an @ in front of /usr/bin/awk: it isn't necessary
# and it'll break everything in sight.
#
AWK = /usr/bin/awk
RM = @/bin/rm -f
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
MV = @/bin/mv -f
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
RMV = /bin/mv -f
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
RCAT = /bin/cat
CAT = @$(RCAT)
'mkaliases' is broken (strips spaces) so don't use it, perhaps it can be removed altogether. corrected typos
1996-07-18 23:48:13 +00:00
MKDB = /usr/sbin/yp_mkdb
DBLOAD = $(MKDB) -m `hostname`
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
MKNETID = /usr/libexec/mknetid
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
NEWALIASES = /usr/bin/newaliases
Update pointer to yppush. (And now, on to rpc.yppasswdd...)
1996-01-12 07:07:18 +00:00
YPPUSH = /usr/sbin/yppush
Makefile.yp: - Improve support for multiple domains. (In preparation for new rpc.yppasswdd.) yp_dblookup.c: - Improve error reporting: be more selective as to what error code we return when a (dbp->get) fails.
1996-02-04 05:39:35 +00:00
.if !defined(UPDATE_DOMAIN)
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
DOMAIN = `/bin/domainname`
Makefile.yp: - Improve support for multiple domains. (In preparation for new rpc.yppasswdd.) yp_dblookup.c: - Improve error reporting: be more selective as to what error code we return when a (dbp->get) fails.
1996-02-04 05:39:35 +00:00
.else
DOMAIN = $(UPDATE_DOMAIN)
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
REVNETGROUP = /usr/libexec/revnetgroup
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
TMP = `echo $@.$$$$`
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
'mkaliases' is broken (strips spaces) so don't use it, perhaps it can be removed altogether. corrected typos
1996-07-18 23:48:13 +00:00
# It is advisable to create a separate directory to contain the
# source files used to generate your NIS maps. If you intend to
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
# support multiple domains, something like /src/dir/$DOMAIN
# would work well.
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
YPSRCDIR = /etc
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if !defined(YP_DIR)
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
YPDIR = /var/yp
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.else
YPDIR = $(YP_DIR)
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
YPMAPDIR = $(YPDIR)/$(DOMAIN)
# These are the files from which the NIS databases are built. You may edit
# these to taste in the event that you wish to keep your NIS source files
# seperate from your NIS server's actual configuration files. Note that the
# NIS passwd and master.passwd files are stored in /var/yp: the server's
# real password database is not used by default. However, you may use
# the real /etc/passwd and /etc/master.passwd files by:
#
#
A comment in /usr/src/usr.sbin/ypserv/Makefile.yp (a.k.a. /var/yp/Makefile.dist) refers to an obsoleted usage of the -m option of rpc.yppasswdd. It is currently taken over by the -t option. -m is used for a different purpose now. PR: 7279 Reviewed by: phk Submitted by: Amakawa Shuhei <amakawa@nebula.sf.t.u-tokyo.ac.jp>
1998-07-22 06:01:13 +00:00
# - invoking yppasswdd with `-t /etc/master.passwd' (yppasswdd will do a
# 'pwd_mkdb' as needed if /etc/master.passwd is thus specified).
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
# - Specifying the location of the master.passwd file using the
# MASTER_PASSWD variable, i.e.:
#
# # make MASTER_PASSWD=/path/to/some/other/master.passwd
#
# - (optionally): editing this Makefile to change the default location.
#
# To add a user, edit $(YPDIR)/master.passwd and type 'make'. The raw
# passwd file will be generated from the master.passwd file automagically.
#
ETHERS = $(YPSRCDIR)/ethers # ethernet addresses (for rarpd)
BOOTPARAMS= $(YPSRCDIR)/bootparams # for booting Sun boxes (bootparamd)
HOSTS = $(YPSRCDIR)/hosts
NETWORKS = $(YPSRCDIR)/networks
PROTOCOLS = $(YPSRCDIR)/protocols
RPC = $(YPSRCDIR)/rpc
SERVICES = $(YPSRCDIR)/services
GROUP = $(YPSRCDIR)/group
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
ALIASES = $(YPSRCDIR)/aliases
NETGROUP = $(YPDIR)/netgroup
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
PASSWD = $(YPDIR)/passwd
.if !defined(MASTER_PASSWD)
MASTER = $(YPDIR)/master.passwd
.else
MASTER = $(MASTER_PASSWD)
.endif
YPSERVERS = $(YPDIR)/ypservers # List of all NIS servers for a domain
PUBLICKEY = $(YPSRCDIR)/publickey
Toss old mknetid script into the attic. Adjust things slightly to support the new mknetid program.
1996-06-25 20:28:07 +00:00
NETID = $(YPSRCDIR)/netid
Add sample rules for amd.host, mostly from the AMD docs, but tweaked to fit the FreeBSD Makefile.yp structure by me. This allows you to have a single amd map for all machines in a cluster. In /etc/sysconfig, it would look something like: amdflags="-p -a /net -c 1800 -l syslog /host amd.host"
1996-07-24 10:48:07 +00:00
AMDHOST = $(YPSRCDIR)/amd.host
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
# List of maps that are always built.
# If you want to omit some of them, feel free to comment
# them out from this list.
TARGETS= servers hosts networks protocols rpc services group
#TARGETS+= aliases
# Sanity checks: filter out targets we can't build
# Note that we don't build the ethers or boorparams maps by default
# since /etc/ethers and /etc/bootparams are not likely to be present
# on all systems.
.if exists($(ETHERS))
TARGETS+= ethers
.else
ETHERS= /dev/null
.endif
.if exists($(BOOTPARAMS))
TARGETS+= bootparams
.else
BOOTPARAMS= /dev/null
.endif
.if exists($(NETGROUP))
TARGETS+= netgrp
.else
NETGROUP= /dev/null
.endif
.if exists($(MASTER))
TARGETS+= passwd master.passwd netid
.else
MASTER= /dev/null
TARGETS+= nopass
.endif
.if exists($(PUBLICKEY))
TARGETS+= publickey
.else
PUBLICKEY= /dev/null
.endif
.if exists($(AMDHOST))
TARGETS+= amd.host
.else
AMDHOST= /dev/null
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
target:
@if [ ! -d $(DOMAIN) ]; then mkdir $(DOMAIN); fi; \
Makefile.yp: - Improve support for multiple domains. (In preparation for new rpc.yppasswdd.) yp_dblookup.c: - Improve error reporting: be more selective as to what error code we return when a (dbp->get) fails.
1996-02-04 05:39:35 +00:00
cd $(DOMAIN) ; echo "NIS Map update started on `date` for domain $(DOMAIN)" ; \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
make -f ../Makefile all; echo "NIS Map update completed."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
all: $(TARGETS)
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
ethers: ethers.byname ethers.byaddr
bootparam: bootparams
hosts: hosts.byname hosts.byaddr
networks: networks.byaddr networks.byname
protocols: protocols.bynumber protocols.byname
rpc: rpc.byname rpc.bynumber
services: services.byname
passwd: passwd.byname passwd.byuid
group: group.byname group.bygid
netgrp: netgroup
netid: netid.byname
servers: ypservers
publickey: publickey.byname
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
aliases: mail.aliases
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
master.passwd: master.passwd.byname master.passwd.byuid
Makefile.yp: - Add a 'pushpw' target that only yppushes the various passwd maps and sends a YPPROC_CLEAR to the local ypserv. This will be used by rpc.yppasswdd once I merge in the in-place update changes. yp_access.c: - Make the yp_access() function print RPC program and procedure numbers that it doesn't know about in literal form. This will allow it to work with other prgrams that it doesn't know about, like rpc.ypxfrd I'm going to import shortly. yp_dblookup.c: - Take out the __inline keywords. They weren't really helping me anyway. - Somehow I broke yp_next() when DB_CACHE wasn't #defined. Fix it. - Also fix potential case where yp_next() might loop forever; make sure it checks the return values of all the (dbp->seq)()/R_NEXT calls that it does as well as comparing keys.
1996-06-05 02:01:31 +00:00
#
# This is a special target used only when doing in-place updates with
# rpc.yppasswdd. In this case, the maps will be updated by the rpc.yppasswdd
# server and won't need to be remade. They will have to be pushed to the
# slaves however. Calling this target implicitly insures that this will
# happen.
#
pushpw:
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) master.passwd.byname ; fi
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) master.passwd.byuid ; fi
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) passwd.byname ; fi
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) passwd.byuid ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
pushmap:
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $(PUSHMAP) ; fi
nopass:
@echo ""
@echo " ********WARNING********"
@echo " Couldn't find the master.passwd source file. This file"
@echo " is needed to generate the master.passwd and passwd maps."
@echo " The default location is /var/yp/master.passwd. You should"
@echo " edit /var/yp/Makefile and set the MASTER variable to point"
@echo " to the source file you wish to use for building the passwd"
@echo " maps, or else invoke make(1) in the following manner:"
Fix typo (missing double quote)
1999-06-24 17:20:54 +00:00
@echo ""
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
@echo " make MASTER_PASSWD=/path/to/master.passwd"
@echo ""
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
mail.aliases: $(ALIASES)
@echo "Updating $@..."
'mkaliases' is broken (strips spaces) so don't use it, perhaps it can be removed altogether. corrected typos
1996-07-18 23:48:13 +00:00
@$(NEWALIASES) -oA$(ALIASES)
was missing @
1996-08-09 17:55:18 +00:00
@$(MKDB) -u $(ALIASES).db \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
| $(DBLOAD) -i $(ALIASES) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Small touch-ups -- no functional changes. Fix some comments to reflect reality (in some cases I made changes to code but not to the comments). Change some instances of 'inline' to '__inline' to pacify gcc -ansi -pedantic. Use rcsid strings more consistently. Make 'oldaddr' static in yp_access(). Use strcpy()/strcat() in yp_open_db_cache() instead of snprintf(). (Seems to be a little faster this way.)
1996-05-31 16:01:51 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
ypservers: $(YPSERVERS)
@echo "Updating $@..."
$(CAT) $(YPSERVERS) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '{ if ($$1 != "" && $$1 !~ "^#.*") print $$0"\t"$$0 }' $^ \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
| $(DBLOAD) -i $(YPSERVERS) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
ethers.byname: $(ETHERS)
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${ETHERS} == "/dev/null"
@echo "Ethers source file not found -- skipping"
.else
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(CAT) $(ETHERS) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '{ if ($$1 != "" && $$1 !~ "^#.*" && $$1 != "+") \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$2"\t"$$0 }' $^ | $(DBLOAD) -i $(ETHERS) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-o $(YPMAPDIR)/$@ - $(TMP); $(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Fix typo in last commit, it seems that a hash comments out a \ at the end of line. Also, fix existing bug in ethers.byname, it was passing an unknown option to yppush. This appears to have been a cut/paste slip intended for a $(DBLOAD) command above it.
1996-07-24 14:04:57 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
ethers.byaddr: $(ETHERS)
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${ETHERS} == "/dev/null"
@echo "Ethers source file not found -- skipping"
.else
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(CAT) $(ETHERS) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '{ if ($$1 != "" && $$1 !~ "^#.*" && $$1 != "+") \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$1"\t"$$0 }' $^ | $(DBLOAD) -i $(ETHERS) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-o $(YPMAPDIR)/$@ - $(TMP); $(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
bootparams: $(BOOTPARAMS)
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${BOOTPARAMS} == "/dev/null"
@echo "Bootparams source file not found -- skipping"
.else
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(CAT) $(BOOTPARAMS) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '{ if ($$1 != "" && $$1 !~ "^#.*" && $$1 != "+") \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$0 }' $^ | $(DBLOAD) -i $(BOOTPARAMS) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-o $(YPMAPDIR)/$@ - $(TMP); $(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
netgroup: $(NETGROUP) netgroup.byhost netgroup.byuser
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${NETGROUP} == "/dev/null"
@echo "Netgroup source file not found -- skipping"
.else
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(CAT) $(NETGROUP) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '{ if ($$1 != "" && $$1 !~ "^#.*" && $$1 != "+") \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$0 }' $^ | $(DBLOAD) -i $(NETGROUP) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-o $(YPMAPDIR)/$@ - $(TMP); $(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
netgroup.byhost: $(NETGROUP)
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${NETGROUP} == "/dev/null"
@echo "Netgroup source file not found -- skipping"
.else
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(CAT) $(NETGROUP) | $(REVNETGROUP) -h -f $(NETGROUP) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '{ if ($$1 != "" && $$1 !~ "^#.*" && $$1 != "+") \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$0 }' $^ | $(DBLOAD) -i $(NETGROUP) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-o $(YPMAPDIR)/$@ - $(TMP); $(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
netgroup.byuser: $(NETGROUP)
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${NETGROUP} == "/dev/null"
@echo "Netgroup source file not found -- skipping"
.else
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(CAT) $(NETGROUP) | $(REVNETGROUP) -u -f $(NETGROUP) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '{ if ($$1 != "" && $$1 !~ "^#.*" && $$1 != "+") \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$0 }' $^ | $(DBLOAD) -i $(NETGROUP) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-o $(YPMAPDIR)/$@ - $(TMP); $(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
hosts.byname: $(HOSTS)
@echo "Updating $@..."
$(CAT) $(HOSTS) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '/^[0-9]/ { for (n=2; n<=NF && $$n !~ "^#.*"; n++) \
Eek! When I added the YP_INTERDOMAIN and YP_SECURE support, I documented and set the B and S variables here, but I forgot to actually add them to the master.passwd and hosts.* targets. In other words, they weren't being passed to yp_mkdb as needed. This needs to go into 2.2; it doesn't break things a lot, but it leaves your master.passwd maps available to unprivileged users without you realizing it.
1996-11-15 18:01:59 +00:00
print $$n"\t"$$0 }' $^ | $(DBLOAD) ${B} -i $(HOSTS) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-o $(YPMAPDIR)/$@ - $(TMP); $(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
hosts.byaddr: $(HOSTS)
@echo "Updating $@..."
$(CAT) $(HOSTS) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '$$1 !~ "^#.*" { print $$1"\t"$$0 }' $^ \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
| $(DBLOAD) ${B} -i $(HOSTS) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
networks.byname: $(NETWORKS)
@echo "Updating $@..."
$(CAT) $(NETWORKS) | \
$(AWK) \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
'$$1 !~ "^#.*" { print $$1"\t"$$0; \
for (n=3; n<=NF && $$n !~ "^#.*"; n++) \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$n"\t"$$0 \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
}' $^ | $(DBLOAD) -i $(NETWORKS) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
networks.byaddr: $(NETWORKS)
@echo "Updating $@..."
$(CAT) $(NETWORKS) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '$$1 !~ "^#.*" { print $$2"\t"$$0 }' $^ \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
| $(DBLOAD) -i $(NETWORKS) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
protocols.byname: $(PROTOCOLS)
@echo "Updating $@..."
$(CAT) $(PROTOCOLS) | \
$(AWK) \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
'$$1 !~ "^#.*" { print $$1"\t"$$0; \
for (n=3; n<=NF && $$n !~ "^#.*"; n++) \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$n"\t"$$0 \
}' $^ | $(DBLOAD) -i $(PROTOCOLS) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-o $(YPMAPDIR)/$@ - $(TMP); $(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
protocols.bynumber: $(PROTOCOLS)
@echo "Updating $@..."
$(CAT) $(PROTOCOLS) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '$$1 !~ "^#.*" { print $$2"\t"$$0 }' $^ \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
| $(DBLOAD) -i $(PROTOCOLS) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
rpc.byname: $(RPC)
@echo "Updating $@..."
$(CAT) $(RPC) | \
$(AWK) \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
'$$1 !~ "^#.*" { print $$1"\t"$$0; \
for (n=3; n<=NF && $$n !~ "^#.*"; n++) \
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
print $$n"\t"$$0 \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
}' $^ | $(DBLOAD) -i $(RPC) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
rpc.bynumber: $(RPC)
@echo "Updating $@..."
$(CAT) $(RPC) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '$$1 !~ "^#.*" { print $$2"\t"$$0 }' $^ \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
| $(DBLOAD) -i $(RPC) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
services.byname: $(SERVICES)
@echo "Updating $@..."
$(CAT) $(SERVICES) | \
$(AWK) \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
'$$1 !~ "^#.*" { for (n=1; n<=NF && $$n !~ "^#.*"; n++) { \
Close PR #2206: fix the services.byname target so that it can handle /etc/services entries with any protocol instead of just udp and tcp. Rather thani having the awk script explicitly search for 'udp' or 'tcp' in the second field using index(), use split() to break up the field at the '/' character if it exists, which extracts the protocol from the field no matter what it is. PR: 2206
1998-02-13 03:38:41 +00:00
if (split($$2, t, "/")) { \
printf("%s/%s", $$n, t[2]) }; \
Doh! Replace backslash that got eaten by gremlins in the last commit.
1998-02-18 04:11:49 +00:00
print "\t"$$0; \
Close PR #2206: fix the services.byname target so that it can handle /etc/services entries with any protocol instead of just udp and tcp. Rather thani having the awk script explicitly search for 'udp' or 'tcp' in the second field using index(), use split() to break up the field at the '/' character if it exists, which extracts the protocol from the field no matter what it is. PR: 2206
1998-02-13 03:38:41 +00:00
if (n == 1) n = 2; \
} ; print $$2"\t"$$0 ; \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
}' $^ | $(DBLOAD) -i $(SERVICES) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
publickey.byname: $(PUBLICKEY)
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${PUBLICKEY} == "/dev/null"
@echo "Publickey source file not found -- skipping"
.else
Two small tweaks: - servers should be the first target listed in 'all:' in order for slave servers to be updated correctly: yppush reads the ypservers map to figure out where all the slaves are, so it needs to be loaded onto the master ASAP. - Fixed small bogon in publickey target which nobody has noticed since we're not using the publickey.byname map yet.
1997-02-09 19:19:14 +00:00
$(CAT) $(PUBLICKEY) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '$$1 !~ "^#.*" { print $$1"\t"$$2 }' $^ \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
| $(DBLOAD) -i $(PUBLICKEY) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(PASSWD): $(MASTER)
@echo "Creating new $@ file from $(MASTER)..."
@if [ ! $(UNSECURE) ]; then \
$(RCAT) $(MASTER) | \
$(AWK) -F: '{if ($$1 != "+") \
print $$1":*:"$$3":"$$4":"$$8":"$$9":"$$10}' $^ \
> $(PASSWD) ; \
else $(RCAT) $(MASTER) | \
$(AWK) -F: '{if ($$1 != "+") \
print $$1":"$$2":"$$3":"$$4":"$$8":"$$9":"$$10}' $^ \
> $(PASSWD) ; fi
passwd.byname: $(PASSWD)
@echo "Updating $@..."
$(CAT) $(PASSWD) | \
$(AWK) -F: '{ if ($$1 != "+") print $$1"\t"$$0 }' $^ \
Modify yp_mkdb so that it only checks for bogus '+' and '-' characters in source input if the -f flag is used, and modify Makefile.yp to only use -f for the passwd, master.passwd and group maps. These should be the only ones for which the + and - characters have special meaning that make it important for us to avoid letting them into any of the map databases. In some cases (namely the automounter maps) we have to allow at least the - character through in order to create the map properly. This closes PR #8699.
1999-08-22 15:34:47 +00:00
| $(DBLOAD) -f -i $(PASSWD) -o $(YPMAPDIR)/$@ - $(TMP); \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
passwd.byuid: $(PASSWD)
@echo "Updating $@..."
$(CAT) $(PASSWD) | \
$(AWK) -F: '{ if ($$1 != "+") print $$3"\t"$$0 }' $^ \
Modify yp_mkdb so that it only checks for bogus '+' and '-' characters in source input if the -f flag is used, and modify Makefile.yp to only use -f for the passwd, master.passwd and group maps. These should be the only ones for which the + and - characters have special meaning that make it important for us to avoid letting them into any of the map databases. In some cases (namely the automounter maps) we have to allow at least the - character through in order to create the map properly. This closes PR #8699.
1999-08-22 15:34:47 +00:00
| $(DBLOAD) -f -i $(PASSWD) -o $(YPMAPDIR)/$@ - $(TMP); \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
group.byname: $(GROUP)
@echo "Updating $@..."
$(CAT) $(GROUP) | \
$(AWK) -F: '{ if ($$1 != "+") print $$1"\t"$$0 }' $^ \
Modify yp_mkdb so that it only checks for bogus '+' and '-' characters in source input if the -f flag is used, and modify Makefile.yp to only use -f for the passwd, master.passwd and group maps. These should be the only ones for which the + and - characters have special meaning that make it important for us to avoid letting them into any of the map databases. In some cases (namely the automounter maps) we have to allow at least the - character through in order to create the map properly. This closes PR #8699.
1999-08-22 15:34:47 +00:00
| $(DBLOAD) -f -i $(GROUP) -o $(YPMAPDIR)/$@ - $(TMP); \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
group.bygid: $(GROUP)
@echo "Updating $@..."
$(CAT) $(GROUP) | \
$(AWK) -F: '{ if ($$1 != "+") print $$3"\t"$$0 }' $^ \
Modify yp_mkdb so that it only checks for bogus '+' and '-' characters in source input if the -f flag is used, and modify Makefile.yp to only use -f for the passwd, master.passwd and group maps. These should be the only ones for which the + and - characters have special meaning that make it important for us to avoid letting them into any of the map databases. In some cases (namely the automounter maps) we have to allow at least the - character through in order to create the map properly. This closes PR #8699.
1999-08-22 15:34:47 +00:00
| $(DBLOAD) -f -i $(GROUP) -o $(YPMAPDIR)/$@ - $(TMP); \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
@$(MAKE) -f ../Makefile netid
netid.byname: $(GROUP) $(PASSWD)
@echo "Updating $@..."
Toss old mknetid script into the attic. Adjust things slightly to support the new mknetid program.
1996-06-25 20:28:07 +00:00
@$(MKNETID) -q -p $(PASSWD) -g $(GROUP) -h $(HOSTS) -n $(NETID) \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
-d $(DOMAIN) | $(DBLOAD) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
master.passwd.byname: $(MASTER)
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${MASTER} == "/dev/null"
@echo "Master.passwd source file not found -- skipping"
.else
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(CAT) $(MASTER) | \
$(AWK) -F: '{ if ($$1 != "+") print $$1"\t"$$0 }' $^ \
Modify yp_mkdb so that it only checks for bogus '+' and '-' characters in source input if the -f flag is used, and modify Makefile.yp to only use -f for the passwd, master.passwd and group maps. These should be the only ones for which the + and - characters have special meaning that make it important for us to avoid letting them into any of the map databases. In some cases (namely the automounter maps) we have to allow at least the - character through in order to create the map properly. This closes PR #8699.
1999-08-22 15:34:47 +00:00
| $(DBLOAD) ${S} -f -i $(MASTER) -o $(YPMAPDIR)/$@ - $(TMP); \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
master.passwd.byuid: $(MASTER)
@echo "Updating $@..."
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.if ${MASTER} == "/dev/null"
@echo "Master.passwd source file not found -- skipping"
.else
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
$(CAT) $(MASTER) | \
$(AWK) -F: '{ if ($$1 != "+") print $$3"\t"$$0 }' $^ \
Modify yp_mkdb so that it only checks for bogus '+' and '-' characters in source input if the -f flag is used, and modify Makefile.yp to only use -f for the passwd, master.passwd and group maps. These should be the only ones for which the + and - characters have special meaning that make it important for us to avoid letting them into any of the map databases. In some cases (namely the automounter maps) we have to allow at least the - character through in order to create the map properly. This closes PR #8699.
1999-08-22 15:34:47 +00:00
| $(DBLOAD) ${S} -f -i $(MASTER) -o $(YPMAPDIR)/$@ - $(TMP); \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
$(RMV) $(TMP) $@
Performance enhancements (I hope) and new stuff: yp_dblookup.c: - Implement database handle caching. What this means is that instead of opening and closing map databases for each request, we open a database and save the handle (and, if requested, the key index) in an array. This saves a bit of overhead on things like repeated YPPROC_NEXT calls, such as you'd get from getpwent(). Normally, each YPPROC_NEXT would require open()ing the database, seeking to the location supplied by the caller (which is time consuming with hash databases as the R_CURSOR flag doesn't work), reading the data, close()ing the database and then shipping the data off to the caller. The system call overhead is prohibitive, especially with very large maps. By caching the handle to an open database, we elimitate at least the open()/close() system calls, as well as the associated DB setup and tear-down operations, for a large percentage of the time. This improves performance substantially at the cost of consuming a little more memory than before. Note that all the caching support is surrounded by #ifdef DB_CACHE so that this same source module can still be used by other programs that don't need it. - Make yp_open_db() call yp_validdomain(). Doing it here saves cycles when caching is enabled since a hit on the map cache list by definition means that the domain being referenced is valid. - Also make yp_open_db() check for exhaustion of file descriptors, just in case. yp_server.c: - Reorganize things a little to take advantage of the database handle caching. Add a call to yp_flush_all() in ypproc_clear_2_svc(). - Remove calls to yp_validdomain() from some of the service procedures. yp_validdomain() is called inside yp_open_db() now, so procedures that call into the database package don't need to use yp_validdomain() themselves. - Fix a bogosity in ypproc_maplist_2_svc(): don't summarily initiallize the result.maps pointer to NULL. This causes yp_maplist_free() to fail and leaks memory. - Make ypproc_master_2_svc() copy the string it gets from the database package into a private static buffer before trying to NUL terminate it. This is necessary with the DB handle caching: stuffing a NUL into the data returned by DB package will goof it up internally. yp_main.c: - Stuff for DB handle caching: call yp_init_dbs() to clear the handle array and add call to yp_flush_all() to the SIGHUP signal handler. Makefile.yp: - Reorganize to deal with database caching. yp_mkdb(8) can now be used to send a YPPROC_CLEAR signal to ypserv(8). Call it after each map is created to refresh ypserv's cache. - Add support for mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). - Make default location for the netgroups source file be /var/yp/netgroup instead of /etc/netgroup. mkaliases: - New file: script to generate mail.alias map. Contributed by Mike Murphy (mrm@sceard.com). Makefile: - Install Makefile.yp as /var/yp/Makefile.dist and link it to /var/yp/Makefile only if /var/yp/Makefile doesn't already exist. Suggested by Peter Wemm. - Install new mkaliases script in /usr/libexec along with mknetid. - Use somewhat saner approach to generating rpcgen-dependent files as suggested by Garrett Wollman.
1996-04-28 04:38:52 +00:00
@$(DBLOAD) -c
Import the new, non-GPL ypserv, written by yours truly. Functionally equivalent to the old ypserv, except that it doesn't support the -p [port] option to force the server to use a particular port. The server stubs and yp.h header file are auto-generated from the yp.x protocol definition file. The auto-generated XDR routines in libc/yp are also used. The database access code has been broken out into a seperate module so that other NIS utilities (ypxfr in particular) can use it. Note that the old mknetid script is being temporarily moved here; it will be replaced by an mknetid program which will eventually have a home under /usr/src/libexec. (The existing script is actually somewhat broken -- it doesn't handle hosts -- but this isn't a big deal at this point since the netid.byname map is really only useful fopr Secure RPC, which we don't have yet.)
1995-12-16 20:54:17 +00:00
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Add a ypinit script and man page (script lifted from OpenBSD and haqued to work on FreeBSD, man page written by me.) Also change Makefile.yp a little to be more tolerane in the face of missing source files. Print a message if we can't find /var/yp/master.passwd telling the user what to do to fix things.
1997-11-10 22:17:13 +00:00
.endif
Add sample rules for amd.host, mostly from the AMD docs, but tweaked to fit the FreeBSD Makefile.yp structure by me. This allows you to have a single amd map for all machines in a cluster. In /etc/sysconfig, it would look something like: amdflags="-p -a /net -c 1800 -l syslog /host amd.host"
1996-07-24 10:48:07 +00:00
amd.host: $(AMDHOST)
@echo "Updating $@..."
$(CAT) $(AMDHOST) | \
Allow comments to begin with multiple '#' characters. PR: 4452 Submitted by: Joao Carlos Mendes Luis <Jonny@mailhost.coppe.ufrj.br>
1998-01-25 17:51:10 +00:00
$(AWK) '$$1 !~ "^#.*" { \
Add sample rules for amd.host, mostly from the AMD docs, but tweaked to fit the FreeBSD Makefile.yp structure by me. This allows you to have a single amd map for all machines in a cluster. In /etc/sysconfig, it would look something like: amdflags="-p -a /net -c 1800 -l syslog /host amd.host"
1996-07-24 10:48:07 +00:00
for (i = 1; i <= NF; i++) \
if (i == NF) { \
if (substr($$i, length($$i), 1) == "\\") \
printf("%s", substr($$i, 1, length($$i) - 1)); \
else \
printf("%s\n", $$i); \
} \
else \
printf("%s ", $$i); \
}' | \
Fix Makefile.yp so that it no longer creates a temporary file called /tmp/ypmake, thereby fixing problems with successive map updates possibly reading stale copies of this file left behind by a previous failed run. PR: 5571
1998-02-04 16:16:58 +00:00
$(DBLOAD) -i $(AMDHOST) -o $(YPMAPDIR)/$@ - $(TMP); \
$(RMV) $(TMP) $@
Add sample rules for amd.host, mostly from the AMD docs, but tweaked to fit the FreeBSD Makefile.yp structure by me. This allows you to have a single amd map for all machines in a cluster. In /etc/sysconfig, it would look something like: amdflags="-p -a /net -c 1800 -l syslog /host amd.host"
1996-07-24 10:48:07 +00:00
@$(DBLOAD) -c
@if [ ! $(NOPUSH) ]; then $(YPPUSH) -d $(DOMAIN) $@; fi
@if [ ! $(NOPUSH) ]; then echo "Pushed $@ map." ; fi
Reference in New Issue Copy Permalink