freebsd-skq/contrib/gcc/tree-tailcall.c

1050 lines
28 KiB
C
Raw Normal View History

2007-05-19 01:19:51 +00:00
/* Tail call optimization on trees.
Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to
the Free Software Foundation, 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "tree.h"
#include "rtl.h"
#include "tm_p.h"
#include "hard-reg-set.h"
#include "basic-block.h"
#include "function.h"
#include "tree-flow.h"
#include "tree-dump.h"
#include "diagnostic.h"
#include "except.h"
#include "tree-pass.h"
#include "flags.h"
#include "langhooks.h"
/* The file implements the tail recursion elimination. It is also used to
analyze the tail calls in general, passing the results to the rtl level
where they are used for sibcall optimization.
In addition to the standard tail recursion elimination, we handle the most
trivial cases of making the call tail recursive by creating accumulators.
For example the following function
int sum (int n)
{
if (n > 0)
return n + sum (n - 1);
else
return 0;
}
is transformed into
int sum (int n)
{
int acc = 0;
while (n > 0)
acc += n--;
return acc;
}
To do this, we maintain two accumulators (a_acc and m_acc) that indicate
when we reach the return x statement, we should return a_acc + x * m_acc
instead. They are initially initialized to 0 and 1, respectively,
so the semantics of the function is obviously preserved. If we are
guaranteed that the value of the accumulator never change, we
omit the accumulator.
There are three cases how the function may exit. The first one is
handled in adjust_return_value, the other two in adjust_accumulator_values
(the second case is actually a special case of the third one and we
present it separately just for clarity):
1) Just return x, where x is not in any of the remaining special shapes.
We rewrite this to a gimple equivalent of return m_acc * x + a_acc.
2) return f (...), where f is the current function, is rewritten in a
classical tail-recursion elimination way, into assignment of arguments
and jump to the start of the function. Values of the accumulators
are unchanged.
3) return a + m * f(...), where a and m do not depend on call to f.
To preserve the semantics described before we want this to be rewritten
in such a way that we finally return
a_acc + (a + m * f(...)) * m_acc = (a_acc + a * m_acc) + (m * m_acc) * f(...).
I.e. we increase a_acc by a * m_acc, multiply m_acc by m and
eliminate the tail call to f. Special cases when the value is just
added or just multiplied are obtained by setting a = 0 or m = 1.
TODO -- it is possible to do similar tricks for other operations. */
/* A structure that describes the tailcall. */
struct tailcall
{
/* The block in that the call occur. */
basic_block call_block;
/* The iterator pointing to the call statement. */
block_stmt_iterator call_bsi;
/* True if it is a call to the current function. */
bool tail_recursion;
/* The return value of the caller is mult * f + add, where f is the return
value of the call. */
tree mult, add;
/* Next tailcall in the chain. */
struct tailcall *next;
};
/* The variables holding the value of multiplicative and additive
accumulator. */
static tree m_acc, a_acc;
static bool suitable_for_tail_opt_p (void);
static bool optimize_tail_call (struct tailcall *, bool);
static void eliminate_tail_call (struct tailcall *);
static void find_tail_calls (basic_block, struct tailcall **);
/* Returns false when the function is not suitable for tail call optimization
from some reason (e.g. if it takes variable number of arguments). */
static bool
suitable_for_tail_opt_p (void)
{
referenced_var_iterator rvi;
tree var;
if (current_function_stdarg)
return false;
/* No local variable nor structure field should be call-clobbered. We
ignore any kind of memory tag, as these are not real variables. */
FOR_EACH_REFERENCED_VAR (var, rvi)
{
if (!is_global_var (var)
&& (!MTAG_P (var) || TREE_CODE (var) == STRUCT_FIELD_TAG)
&& is_call_clobbered (var))
return false;
}
return true;
}
/* Returns false when the function is not suitable for tail call optimization
from some reason (e.g. if it takes variable number of arguments).
This test must pass in addition to suitable_for_tail_opt_p in order to make
tail call discovery happen. */
static bool
suitable_for_tail_call_opt_p (void)
{
tree param;
/* alloca (until we have stack slot life analysis) inhibits
sibling call optimizations, but not tail recursion. */
if (current_function_calls_alloca)
return false;
/* If we are using sjlj exceptions, we may need to add a call to
_Unwind_SjLj_Unregister at exit of the function. Which means
that we cannot do any sibcall transformations. */
if (USING_SJLJ_EXCEPTIONS && current_function_has_exception_handlers ())
return false;
/* Any function that calls setjmp might have longjmp called from
any called function. ??? We really should represent this
properly in the CFG so that this needn't be special cased. */
if (current_function_calls_setjmp)
return false;
/* ??? It is OK if the argument of a function is taken in some cases,
but not in all cases. See PR15387 and PR19616. Revisit for 4.1. */
for (param = DECL_ARGUMENTS (current_function_decl);
param;
param = TREE_CHAIN (param))
if (TREE_ADDRESSABLE (param))
return false;
return true;
}
/* Checks whether the expression EXPR in stmt AT is independent of the
statement pointed to by BSI (in a sense that we already know EXPR's value
at BSI). We use the fact that we are only called from the chain of
basic blocks that have only single successor. Returns the expression
containing the value of EXPR at BSI. */
static tree
independent_of_stmt_p (tree expr, tree at, block_stmt_iterator bsi)
{
basic_block bb, call_bb, at_bb;
edge e;
edge_iterator ei;
if (is_gimple_min_invariant (expr))
return expr;
if (TREE_CODE (expr) != SSA_NAME)
return NULL_TREE;
/* Mark the blocks in the chain leading to the end. */
at_bb = bb_for_stmt (at);
call_bb = bb_for_stmt (bsi_stmt (bsi));
for (bb = call_bb; bb != at_bb; bb = single_succ (bb))
bb->aux = &bb->aux;
bb->aux = &bb->aux;
while (1)
{
at = SSA_NAME_DEF_STMT (expr);
bb = bb_for_stmt (at);
/* The default definition or defined before the chain. */
if (!bb || !bb->aux)
break;
if (bb == call_bb)
{
for (; !bsi_end_p (bsi); bsi_next (&bsi))
if (bsi_stmt (bsi) == at)
break;
if (!bsi_end_p (bsi))
expr = NULL_TREE;
break;
}
if (TREE_CODE (at) != PHI_NODE)
{
expr = NULL_TREE;
break;
}
FOR_EACH_EDGE (e, ei, bb->preds)
if (e->src->aux)
break;
gcc_assert (e);
expr = PHI_ARG_DEF_FROM_EDGE (at, e);
if (TREE_CODE (expr) != SSA_NAME)
{
/* The value is a constant. */
break;
}
}
/* Unmark the blocks. */
for (bb = call_bb; bb != at_bb; bb = single_succ (bb))
bb->aux = NULL;
bb->aux = NULL;
return expr;
}
/* Simulates the effect of an assignment of ASS in STMT on the return value
of the tail recursive CALL passed in ASS_VAR. M and A are the
multiplicative and the additive factor for the real return value. */
static bool
process_assignment (tree ass, tree stmt, block_stmt_iterator call, tree *m,
tree *a, tree *ass_var)
{
tree op0, op1, non_ass_var;
tree dest = TREE_OPERAND (ass, 0);
tree src = TREE_OPERAND (ass, 1);
enum tree_code code = TREE_CODE (src);
tree src_var = src;
/* See if this is a simple copy operation of an SSA name to the function
result. In that case we may have a simple tail call. Ignore type
conversions that can never produce extra code between the function
call and the function return. */
STRIP_NOPS (src_var);
if (TREE_CODE (src_var) == SSA_NAME)
{
if (src_var != *ass_var)
return false;
*ass_var = dest;
return true;
}
if (TREE_CODE_CLASS (code) != tcc_binary)
return false;
/* Accumulator optimizations will reverse the order of operations.
We can only do that for floating-point types if we're assuming
that addition and multiplication are associative. */
if (!flag_unsafe_math_optimizations)
if (FLOAT_TYPE_P (TREE_TYPE (DECL_RESULT (current_function_decl))))
return false;
/* We only handle the code like
x = call ();
y = m * x;
z = y + a;
return z;
TODO -- Extend it for cases where the linear transformation of the output
is expressed in a more complicated way. */
op0 = TREE_OPERAND (src, 0);
op1 = TREE_OPERAND (src, 1);
if (op0 == *ass_var
&& (non_ass_var = independent_of_stmt_p (op1, stmt, call)))
;
else if (op1 == *ass_var
&& (non_ass_var = independent_of_stmt_p (op0, stmt, call)))
;
else
return false;
switch (code)
{
case PLUS_EXPR:
/* There should be no previous addition. TODO -- it should be fairly
straightforward to lift this restriction -- just allow storing
more complicated expressions in *A, and gimplify it in
adjust_accumulator_values. */
if (*a)
return false;
*a = non_ass_var;
*ass_var = dest;
return true;
case MULT_EXPR:
/* Similar remark applies here. Handling multiplication after addition
is just slightly more complicated -- we need to multiply both *A and
*M. */
if (*a || *m)
return false;
*m = non_ass_var;
*ass_var = dest;
return true;
/* TODO -- Handle other codes (NEGATE_EXPR, MINUS_EXPR). */
default:
return false;
}
}
/* Propagate VAR through phis on edge E. */
static tree
propagate_through_phis (tree var, edge e)
{
basic_block dest = e->dest;
tree phi;
for (phi = phi_nodes (dest); phi; phi = PHI_CHAIN (phi))
if (PHI_ARG_DEF_FROM_EDGE (phi, e) == var)
return PHI_RESULT (phi);
return var;
}
/* Finds tailcalls falling into basic block BB. The list of found tailcalls is
added to the start of RET. */
static void
find_tail_calls (basic_block bb, struct tailcall **ret)
{
tree ass_var, ret_var, stmt, func, param, args, call = NULL_TREE;
block_stmt_iterator bsi, absi;
bool tail_recursion;
struct tailcall *nw;
edge e;
tree m, a;
basic_block abb;
stmt_ann_t ann;
if (!single_succ_p (bb))
return;
for (bsi = bsi_last (bb); !bsi_end_p (bsi); bsi_prev (&bsi))
{
stmt = bsi_stmt (bsi);
/* Ignore labels. */
if (TREE_CODE (stmt) == LABEL_EXPR)
continue;
/* Check for a call. */
if (TREE_CODE (stmt) == MODIFY_EXPR)
{
ass_var = TREE_OPERAND (stmt, 0);
call = TREE_OPERAND (stmt, 1);
if (TREE_CODE (call) == WITH_SIZE_EXPR)
call = TREE_OPERAND (call, 0);
}
else
{
ass_var = NULL_TREE;
call = stmt;
}
if (TREE_CODE (call) == CALL_EXPR)
break;
/* If the statement has virtual or volatile operands, fail. */
ann = stmt_ann (stmt);
if (!ZERO_SSA_OPERANDS (stmt, (SSA_OP_VUSE | SSA_OP_VIRTUAL_DEFS))
|| ann->has_volatile_ops)
return;
}
if (bsi_end_p (bsi))
{
edge_iterator ei;
/* Recurse to the predecessors. */
FOR_EACH_EDGE (e, ei, bb->preds)
find_tail_calls (e->src, ret);
return;
}
/* We found the call, check whether it is suitable. */
tail_recursion = false;
func = get_callee_fndecl (call);
if (func == current_function_decl)
{
for (param = DECL_ARGUMENTS (func), args = TREE_OPERAND (call, 1);
param && args;
param = TREE_CHAIN (param), args = TREE_CHAIN (args))
{
tree arg = TREE_VALUE (args);
if (param != arg)
{
/* Make sure there are no problems with copying. The parameter
have a copyable type and the two arguments must have reasonably
equivalent types. The latter requirement could be relaxed if
we emitted a suitable type conversion statement. */
if (!is_gimple_reg_type (TREE_TYPE (param))
|| !lang_hooks.types_compatible_p (TREE_TYPE (param),
TREE_TYPE (arg)))
break;
/* The parameter should be a real operand, so that phi node
created for it at the start of the function has the meaning
of copying the value. This test implies is_gimple_reg_type
from the previous condition, however this one could be
relaxed by being more careful with copying the new value
of the parameter (emitting appropriate MODIFY_EXPR and
updating the virtual operands). */
if (!is_gimple_reg (param))
break;
}
}
if (!args && !param)
tail_recursion = true;
}
/* Now check the statements after the call. None of them has virtual
operands, so they may only depend on the call through its return
value. The return value should also be dependent on each of them,
since we are running after dce. */
m = NULL_TREE;
a = NULL_TREE;
abb = bb;
absi = bsi;
while (1)
{
bsi_next (&absi);
while (bsi_end_p (absi))
{
ass_var = propagate_through_phis (ass_var, single_succ_edge (abb));
abb = single_succ (abb);
absi = bsi_start (abb);
}
stmt = bsi_stmt (absi);
if (TREE_CODE (stmt) == LABEL_EXPR)
continue;
if (TREE_CODE (stmt) == RETURN_EXPR)
break;
if (TREE_CODE (stmt) != MODIFY_EXPR)
return;
if (!process_assignment (stmt, stmt, bsi, &m, &a, &ass_var))
return;
}
/* See if this is a tail call we can handle. */
ret_var = TREE_OPERAND (stmt, 0);
if (ret_var
&& TREE_CODE (ret_var) == MODIFY_EXPR)
{
tree ret_op = TREE_OPERAND (ret_var, 1);
STRIP_NOPS (ret_op);
if (!tail_recursion
&& TREE_CODE (ret_op) != SSA_NAME)
return;
if (!process_assignment (ret_var, stmt, bsi, &m, &a, &ass_var))
return;
ret_var = TREE_OPERAND (ret_var, 0);
}
/* We may proceed if there either is no return value, or the return value
is identical to the call's return. */
if (ret_var
&& (ret_var != ass_var))
return;
/* If this is not a tail recursive call, we cannot handle addends or
multiplicands. */
if (!tail_recursion && (m || a))
return;
nw = XNEW (struct tailcall);
nw->call_block = bb;
nw->call_bsi = bsi;
nw->tail_recursion = tail_recursion;
nw->mult = m;
nw->add = a;
nw->next = *ret;
*ret = nw;
}
/* Adjust the accumulator values according to A and M after BSI, and update
the phi nodes on edge BACK. */
static void
adjust_accumulator_values (block_stmt_iterator bsi, tree m, tree a, edge back)
{
tree stmt, var, phi, tmp;
tree ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
tree a_acc_arg = a_acc, m_acc_arg = m_acc;
if (a)
{
if (m_acc)
{
if (integer_onep (a))
var = m_acc;
else
{
stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
build2 (MULT_EXPR, ret_type, m_acc, a));
tmp = create_tmp_var (ret_type, "acc_tmp");
add_referenced_var (tmp);
var = make_ssa_name (tmp, stmt);
TREE_OPERAND (stmt, 0) = var;
bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
}
}
else
var = a;
stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
build2 (PLUS_EXPR, ret_type, a_acc, var));
var = make_ssa_name (SSA_NAME_VAR (a_acc), stmt);
TREE_OPERAND (stmt, 0) = var;
bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
a_acc_arg = var;
}
if (m)
{
stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
build2 (MULT_EXPR, ret_type, m_acc, m));
var = make_ssa_name (SSA_NAME_VAR (m_acc), stmt);
TREE_OPERAND (stmt, 0) = var;
bsi_insert_after (&bsi, stmt, BSI_NEW_STMT);
m_acc_arg = var;
}
if (a_acc)
{
for (phi = phi_nodes (back->dest); phi; phi = PHI_CHAIN (phi))
if (PHI_RESULT (phi) == a_acc)
break;
add_phi_arg (phi, a_acc_arg, back);
}
if (m_acc)
{
for (phi = phi_nodes (back->dest); phi; phi = PHI_CHAIN (phi))
if (PHI_RESULT (phi) == m_acc)
break;
add_phi_arg (phi, m_acc_arg, back);
}
}
/* Adjust value of the return at the end of BB according to M and A
accumulators. */
static void
adjust_return_value (basic_block bb, tree m, tree a)
{
tree ret_stmt = last_stmt (bb), ret_var, var, stmt, tmp;
tree ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
block_stmt_iterator bsi = bsi_last (bb);
gcc_assert (TREE_CODE (ret_stmt) == RETURN_EXPR);
ret_var = TREE_OPERAND (ret_stmt, 0);
if (!ret_var)
return;
if (TREE_CODE (ret_var) == MODIFY_EXPR)
{
ret_var->common.ann = (tree_ann_t) stmt_ann (ret_stmt);
bsi_replace (&bsi, ret_var, true);
SSA_NAME_DEF_STMT (TREE_OPERAND (ret_var, 0)) = ret_var;
ret_var = TREE_OPERAND (ret_var, 0);
ret_stmt = build1 (RETURN_EXPR, TREE_TYPE (ret_stmt), ret_var);
bsi_insert_after (&bsi, ret_stmt, BSI_NEW_STMT);
}
if (m)
{
stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
build2 (MULT_EXPR, ret_type, m_acc, ret_var));
tmp = create_tmp_var (ret_type, "acc_tmp");
add_referenced_var (tmp);
var = make_ssa_name (tmp, stmt);
TREE_OPERAND (stmt, 0) = var;
bsi_insert_before (&bsi, stmt, BSI_SAME_STMT);
}
else
var = ret_var;
if (a)
{
stmt = build2 (MODIFY_EXPR, ret_type, NULL_TREE,
build2 (PLUS_EXPR, ret_type, a_acc, var));
tmp = create_tmp_var (ret_type, "acc_tmp");
add_referenced_var (tmp);
var = make_ssa_name (tmp, stmt);
TREE_OPERAND (stmt, 0) = var;
bsi_insert_before (&bsi, stmt, BSI_SAME_STMT);
}
TREE_OPERAND (ret_stmt, 0) = var;
update_stmt (ret_stmt);
}
/* Subtract COUNT and FREQUENCY from the basic block and it's
outgoing edge. */
static void
decrease_profile (basic_block bb, gcov_type count, int frequency)
{
edge e;
bb->count -= count;
if (bb->count < 0)
bb->count = 0;
bb->frequency -= frequency;
if (bb->frequency < 0)
bb->frequency = 0;
if (!single_succ_p (bb))
{
gcc_assert (!EDGE_COUNT (bb->succs));
return;
}
e = single_succ_edge (bb);
e->count -= count;
if (e->count < 0)
e->count = 0;
}
/* Returns true if argument PARAM of the tail recursive call needs to be copied
when the call is eliminated. */
static bool
arg_needs_copy_p (tree param)
{
tree def;
if (!is_gimple_reg (param) || !var_ann (param))
return false;
/* Parameters that are only defined but never used need not be copied. */
def = default_def (param);
if (!def)
return false;
return true;
}
/* Eliminates tail call described by T. TMP_VARS is a list of
temporary variables used to copy the function arguments. */
static void
eliminate_tail_call (struct tailcall *t)
{
tree param, stmt, args, rslt, call;
basic_block bb, first;
edge e;
tree phi;
block_stmt_iterator bsi;
tree orig_stmt;
stmt = orig_stmt = bsi_stmt (t->call_bsi);
bb = t->call_block;
if (dump_file && (dump_flags & TDF_DETAILS))
{
fprintf (dump_file, "Eliminated tail recursion in bb %d : ",
bb->index);
print_generic_stmt (dump_file, stmt, TDF_SLIM);
fprintf (dump_file, "\n");
}
if (TREE_CODE (stmt) == MODIFY_EXPR)
stmt = TREE_OPERAND (stmt, 1);
first = single_succ (ENTRY_BLOCK_PTR);
/* Remove the code after call_bsi that will become unreachable. The
possibly unreachable code in other blocks is removed later in
cfg cleanup. */
bsi = t->call_bsi;
bsi_next (&bsi);
while (!bsi_end_p (bsi))
{
tree t = bsi_stmt (bsi);
/* Do not remove the return statement, so that redirect_edge_and_branch
sees how the block ends. */
if (TREE_CODE (t) == RETURN_EXPR)
break;
bsi_remove (&bsi, true);
release_defs (t);
}
/* Number of executions of function has reduced by the tailcall. */
e = single_succ_edge (t->call_block);
decrease_profile (EXIT_BLOCK_PTR, e->count, EDGE_FREQUENCY (e));
decrease_profile (ENTRY_BLOCK_PTR, e->count, EDGE_FREQUENCY (e));
if (e->dest != EXIT_BLOCK_PTR)
decrease_profile (e->dest, e->count, EDGE_FREQUENCY (e));
/* Replace the call by a jump to the start of function. */
e = redirect_edge_and_branch (single_succ_edge (t->call_block), first);
gcc_assert (e);
PENDING_STMT (e) = NULL_TREE;
/* Add phi node entries for arguments. The ordering of the phi nodes should
be the same as the ordering of the arguments. */
for (param = DECL_ARGUMENTS (current_function_decl),
args = TREE_OPERAND (stmt, 1),
phi = phi_nodes (first);
param;
param = TREE_CHAIN (param),
args = TREE_CHAIN (args))
{
if (!arg_needs_copy_p (param))
continue;
gcc_assert (param == SSA_NAME_VAR (PHI_RESULT (phi)));
add_phi_arg (phi, TREE_VALUE (args), e);
phi = PHI_CHAIN (phi);
}
/* Update the values of accumulators. */
adjust_accumulator_values (t->call_bsi, t->mult, t->add, e);
call = bsi_stmt (t->call_bsi);
if (TREE_CODE (call) == MODIFY_EXPR)
{
rslt = TREE_OPERAND (call, 0);
/* Result of the call will no longer be defined. So adjust the
SSA_NAME_DEF_STMT accordingly. */
SSA_NAME_DEF_STMT (rslt) = build_empty_stmt ();
}
bsi_remove (&t->call_bsi, true);
release_defs (call);
}
/* Add phi nodes for the virtual operands defined in the function to the
header of the loop created by tail recursion elimination.
Originally, we used to add phi nodes only for call clobbered variables,
as the value of the non-call clobbered ones obviously cannot be used
or changed within the recursive call. However, the local variables
from multiple calls now share the same location, so the virtual ssa form
requires us to say that the location dies on further iterations of the loop,
which requires adding phi nodes.
*/
static void
add_virtual_phis (void)
{
referenced_var_iterator rvi;
tree var;
/* The problematic part is that there is no way how to know what
to put into phi nodes (there in fact does not have to be such
ssa name available). A solution would be to have an artificial
use/kill for all virtual operands in EXIT node. Unless we have
this, we cannot do much better than to rebuild the ssa form for
possibly affected virtual ssa names from scratch. */
FOR_EACH_REFERENCED_VAR (var, rvi)
{
if (!is_gimple_reg (var) && default_def (var) != NULL_TREE)
mark_sym_for_renaming (var);
}
update_ssa (TODO_update_ssa_only_virtuals);
}
/* Optimizes the tailcall described by T. If OPT_TAILCALLS is true, also
mark the tailcalls for the sibcall optimization. */
static bool
optimize_tail_call (struct tailcall *t, bool opt_tailcalls)
{
if (t->tail_recursion)
{
eliminate_tail_call (t);
return true;
}
if (opt_tailcalls)
{
tree stmt = bsi_stmt (t->call_bsi);
stmt = get_call_expr_in (stmt);
CALL_EXPR_TAILCALL (stmt) = 1;
if (dump_file && (dump_flags & TDF_DETAILS))
{
fprintf (dump_file, "Found tail call ");
print_generic_expr (dump_file, stmt, dump_flags);
fprintf (dump_file, " in bb %i\n", t->call_block->index);
}
}
return false;
}
/* Optimizes tail calls in the function, turning the tail recursion
into iteration. */
static void
tree_optimize_tail_calls_1 (bool opt_tailcalls)
{
edge e;
bool phis_constructed = false;
struct tailcall *tailcalls = NULL, *act, *next;
bool changed = false;
basic_block first = single_succ (ENTRY_BLOCK_PTR);
tree stmt, param, ret_type, tmp, phi;
edge_iterator ei;
if (!suitable_for_tail_opt_p ())
return;
if (opt_tailcalls)
opt_tailcalls = suitable_for_tail_call_opt_p ();
FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
{
/* Only traverse the normal exits, i.e. those that end with return
statement. */
stmt = last_stmt (e->src);
if (stmt
&& TREE_CODE (stmt) == RETURN_EXPR)
find_tail_calls (e->src, &tailcalls);
}
/* Construct the phi nodes and accumulators if necessary. */
a_acc = m_acc = NULL_TREE;
for (act = tailcalls; act; act = act->next)
{
if (!act->tail_recursion)
continue;
if (!phis_constructed)
{
/* Ensure that there is only one predecessor of the block. */
if (!single_pred_p (first))
first = split_edge (single_succ_edge (ENTRY_BLOCK_PTR));
/* Copy the args if needed. */
for (param = DECL_ARGUMENTS (current_function_decl);
param;
param = TREE_CHAIN (param))
if (arg_needs_copy_p (param))
{
tree name = default_def (param);
tree new_name = make_ssa_name (param, SSA_NAME_DEF_STMT (name));
tree phi;
set_default_def (param, new_name);
phi = create_phi_node (name, first);
SSA_NAME_DEF_STMT (name) = phi;
add_phi_arg (phi, new_name, single_pred_edge (first));
}
phis_constructed = true;
}
if (act->add && !a_acc)
{
ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
tmp = create_tmp_var (ret_type, "add_acc");
add_referenced_var (tmp);
phi = create_phi_node (tmp, first);
add_phi_arg (phi,
/* RET_TYPE can be a float when -ffast-maths is
enabled. */
fold_convert (ret_type, integer_zero_node),
single_pred_edge (first));
a_acc = PHI_RESULT (phi);
}
if (act->mult && !m_acc)
{
ret_type = TREE_TYPE (DECL_RESULT (current_function_decl));
tmp = create_tmp_var (ret_type, "mult_acc");
add_referenced_var (tmp);
phi = create_phi_node (tmp, first);
add_phi_arg (phi,
/* RET_TYPE can be a float when -ffast-maths is
enabled. */
fold_convert (ret_type, integer_one_node),
single_pred_edge (first));
m_acc = PHI_RESULT (phi);
}
}
if (phis_constructed)
{
/* Reverse the order of the phi nodes, so that it matches the order
of operands of the function, as assumed by eliminate_tail_call. */
set_phi_nodes (first, phi_reverse (phi_nodes (first)));
}
for (; tailcalls; tailcalls = next)
{
next = tailcalls->next;
changed |= optimize_tail_call (tailcalls, opt_tailcalls);
free (tailcalls);
}
if (a_acc || m_acc)
{
/* Modify the remaining return statements. */
FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
{
stmt = last_stmt (e->src);
if (stmt
&& TREE_CODE (stmt) == RETURN_EXPR)
adjust_return_value (e->src, m_acc, a_acc);
}
}
if (changed)
{
free_dominance_info (CDI_DOMINATORS);
cleanup_tree_cfg ();
}
if (phis_constructed)
add_virtual_phis ();
}
static unsigned int
execute_tail_recursion (void)
{
tree_optimize_tail_calls_1 (false);
return 0;
}
static bool
gate_tail_calls (void)
{
return flag_optimize_sibling_calls != 0;
}
static unsigned int
execute_tail_calls (void)
{
tree_optimize_tail_calls_1 (true);
return 0;
}
struct tree_opt_pass pass_tail_recursion =
{
"tailr", /* name */
gate_tail_calls, /* gate */
execute_tail_recursion, /* execute */
NULL, /* sub */
NULL, /* next */
0, /* static_pass_number */
0, /* tv_id */
PROP_cfg | PROP_ssa | PROP_alias, /* properties_required */
0, /* properties_provided */
0, /* properties_destroyed */
0, /* todo_flags_start */
TODO_dump_func | TODO_verify_ssa, /* todo_flags_finish */
0 /* letter */
};
struct tree_opt_pass pass_tail_calls =
{
"tailc", /* name */
gate_tail_calls, /* gate */
execute_tail_calls, /* execute */
NULL, /* sub */
NULL, /* next */
0, /* static_pass_number */
0, /* tv_id */
PROP_cfg | PROP_ssa | PROP_alias, /* properties_required */
0, /* properties_provided */
0, /* properties_destroyed */
0, /* todo_flags_start */
TODO_dump_func | TODO_verify_ssa, /* todo_flags_finish */
0 /* letter */
};