d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dc00c828e3
freebsd-skq/sys/dev/usb/usbdevs

1134 lines
39 KiB
Plaintext
Raw Normal View History

Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
$FreeBSD$
/*
Add Freecom + product; Update NetBSD's copyright
2000-04-03 14:47:43 +00:00
* Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
Sync with NetBSD
2000-05-07 19:44:16 +00:00
* by Lennart Augustsson (lennart@augustsson.net) at
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* List of known USB vendors
Add a comment about the fact that adding an ID doesn't actually do anything.
2001-02-06 14:59:03 +00:00
*
Update the header of the file with a comment on how to regenerate the usbdevs* file correctly. Suggested by: phantom
2001-09-18 22:27:41 +00:00
* Adding an ID and its string description for a device to the usbdevs file,
* enables the USB stack to print a useful description of the device that was
* connected.
*
* The ID should be added in usbdevs and then the files usbdevs.h and
* usbdevs_data.h need to be regenerated.
*
* # edit usbdevs
* make -f Makefile.usbdevs
* # test your change
* cd ../../modules/usb
* make
* # commit, if appropriate
* cvs -m "ID for device XYZ" commit usbdevs
* # commit the derived files after the $ FreeBSD $ has been updated.
* cvs commit usbdevs.h usbdevs_data.h
*
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
* Please note that these IDs do not do anything. Adding an ID here and
Add a comment about the fact that adding an ID doesn't actually do anything.
2001-02-06 14:59:03 +00:00
* regenerating the usbdevs.h and usbdevs_data.h only makes a symbolic name
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
* available to the source code and does not change any functionality, nor
* does it make your device available to a specific driver.
* It will however make the descriptive string available if a device does not
* provide the string itself.
Add a comment about the fact that adding an ID doesn't actually do anything.
2001-02-06 14:59:03 +00:00
*
* After adding a vendor ID VNDR and a product ID PRDCT you will have the
* following extra defines:
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
* #define USB_VENDOR_VNDR 0x????
* #define USB_PRODUCT_VNDR_PRDCT 0x????
Add a comment about the fact that adding an ID doesn't actually do anything.
2001-02-06 14:59:03 +00:00
*
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
* You may have to add these defines to the respective probe routines to
* make the device recognised by the appropriate device driver.
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
*/
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AOX 0x03e8 AOX
vendor ATMEL 0x03eb Atmel
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
vendor MITSUMI 0x03ee Mitsumi
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor HP 0x03f0 Hewlett Packard
vendor ADAPTEC 0x03f3 Adaptec
Sync with NetBSD
2000-10-25 10:13:47 +00:00
vendor NATIONAL 0x0400 National Semiconductor
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACERLABS 0x0402 Acer Labs
Sync with NetBSD
2000-05-07 19:44:16 +00:00
vendor FTDI 0x0403 Future Technology Devices
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor NEC 0x0409 NEC
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor KODAK 0x040a Eastman Kodak
vendor MELCO 0x0411 Melco
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
vendor CREATIVE 0x041e Creative
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ADI 0x0422 ADI Systems
vendor CATC 0x0423 Computer Access Technology
Add another SMC device ID and the hub ID that it went with.
2002-03-19 10:54:40 +00:00
vendor SMC2 0x0424 Standard Microsystems
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor GRAVIS 0x0428 Advanced Gravis Computer Tech.
Add Sun keyboard and NetChip
2000-01-10 22:31:01 +00:00
vendor SUN 0x0430 Sun Microsystems
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
vendor TAUGA 0x0436 Taugagreining HF
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor AMD 0x0438 Advanced Micro Devices
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor LEXMARK 0x043d Lexmark International
vendor NANAO 0x0440 NANAO
vendor ALPS 0x044e Alps Electric
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor THRUST 0x044f Thrustmaster
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor TI 0x0451 Texas Instruments
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ANALOGDEVICES 0x0456 Analog Devices
vendor KYE 0x0458 KYE Systems
Add vendor ID for Kingston Technology and add device ID for KNU101TX USB ethernet adapter. (Yes, another one.)
2000-10-10 23:23:54 +00:00
vendor DIAMOND2 0x045a Diamond (Supra)
Some new ids, from NetBSD
2000-08-06 23:22:13 +00:00
vendor MICROSOFT 0x045e Microsoft
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor PRIMAX 0x0461 Primax Electronics
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AMP 0x0464 AMP
vendor CHERRY 0x046a Cherry Mikroschalter
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor MEGATRENDS 0x046b American Megatrends
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor LOGITECH 0x046d Logitech
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
vendor BTC 0x046e Behavior Tech. Computer
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor PHILIPS 0x0471 Philips
Add Sanyo SCP-4900 phone. It needs quirks.
2003-01-01 20:18:15 +00:00
vendor SANYO 0x0474 Sanyo Electric
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor CONNECTIX 0x0478 Connectix
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
vendor KENSINGTON 0x047d Kensington
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor LUCENT 0x047e Lucent
vendor STMICRO 0x0483 STMicroelectronics
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor YAMAHA 0x0499 YAMAHA
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
vendor COMPAQ 0x049f Compaq Computers
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACERP 0x04a5 Acer Peripherals
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor VISIONEER 0x04a7 Visioneer
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor CANON 0x04a9 Canon
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
vendor NIKON 0x04b0 Nikon
Add vendor IBM product USB CD-ROM Drive
2000-08-26 05:06:40 +00:00
vendor IBM 0x04b3 IBM Corporation
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor CYPRESS 0x04b4 Cypress Semiconductor
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor EPSON 0x04b8 Seiko Epson
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor RAINBOW 0x04b9 Rainbow Technologies
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
vendor IODATA 0x04bb I/O Data
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor TDK 0x04bf TDK
Add device driver support for USB ethernet adapters based on the Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com 3c19250 and the ADS Technologies USB-10BT. This device is 10mbs half-duplex only, so there's miibus or ifmedia support. This device also requires firmware to be loaded into it, however KLSI allows redistribution of the firmware images (I specifically asked about this; they said it was ok). Special thanks to Annelise Anderson for getting me in touch with KLSI (eventually) and thanks to KLSI for providing the necessary programming info. Highlights: - Add driver files to /sys/dev/usb - update usbdevs and regenerate attendate files - update usb_quirks.c - Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha - Update LINT, GENERIC and others for i386, alpha and pc98 - Add man page - Add module - Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
vendor 3COMUSR 0x04c1 U.S. Robotics
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor METHODE 0x04c2 Methode Electronics Far East
vendor MAXISWITCH 0x04c3 Maxi Switch
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor LOCKHEEDMER 0x04c4 Lockheed Martin Energy Research
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor FUJITSU 0x04c5 Fujitsu
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor TOSHIBAAM 0x04c6 Toshiba America Electronic Components
vendor MICROMACRO 0x04c7 Micro Macro Technologies
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor KONICA 0x04c8 Konica
vendor LITEON 0x04ca Lite-On Technology
vendor FUJIPHOTO 0x04cb Fuji Photo Film
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor PHILIPSSEMI 0x04cc Philips Semiconductors
vendor TATUNG 0x04cd Tatung Co. Of America
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor SCANLOGIC 0x04ce ScanLogic
vendor MYSON 0x04cf Myson Technology
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor DIGI2 0x04d0 Digi International
vendor ITTCANON 0x04d1 ITT Canon
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ALTEC 0x04d2 Altec Lansing Technologies
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor PANASONIC 0x04da Panasonic (Matsushita)
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor IIYAMA 0x04e1 Iiyama
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor SHUTTLE 0x04e6 Shuttle Technology
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ANNABOOKS 0x04ed Annabooks
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor CHICONY 0x04f2 Chicony Electronics
vendor BROTHER 0x04f9 Brother Industries
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor DALLAS 0x04fa Dallas Semiconductor
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACER 0x0502 Acer
vendor 3COM 0x0506 3Com
vendor AZTECH 0x0509 Aztech Systems
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor BELKIN 0x050d Belkin Components
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor KAWATSU 0x050f Kawatsu Semiconductor
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor APC 0x051d American Power Conversion
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor CONNECTEK 0x0522 Advanced Connectek USA
Add Sun keyboard and NetChip
2000-01-10 22:31:01 +00:00
vendor NETCHIP 0x0525 NetChip Technology
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ALTRA 0x0527 ALTRA
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ATI 0x0528 ATI Technologies
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor AKS 0x0529 Aladdin Knowledge Systems
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor UNIACCESS 0x0540 Universal Access
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor XIRLINK 0x0545 Xirlink
vendor ANCHOR 0x0547 Anchor Chips
vendor SONY 0x054c Sony
vendor VISION 0x0553 VLSI Vision
vendor ASAHIKASEI 0x0556 Asahi Kasei Microsystems
vendor ATEN 0x0557 ATEN International
vendor MUSTEK 0x055f Mustek Systems
vendor TELEX 0x0562 Telex Communications
vendor PERACOM 0x0565 Peracom Networks
vendor ALCOR2 0x0566 Alcor Micro
vendor WACOM 0x056a WACOM
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor ETEK 0x056c e-TEK Labs
vendor EIZO 0x056d EIZO
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ELECOM 0x056e Elecom
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor HAUPPAUGE 0x0573 Hauppauge Computer Works
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor BAFO 0x0576 BAFO/Quality Computer Accessories
Add Y-E Data floppy drive.
2000-03-15 21:53:09 +00:00
vendor YEDATA 0x057b Y-E Data
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor AVM 0x057c AVM GmbH
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
vendor QUICKSHOT 0x057f Quickshot
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ROLAND 0x0582 Roland
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor ROCKFIRE 0x0583 Rockfire
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
vendor RATOC 0x0584 RATOC Systems, Inc.
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ZYXEL 0x0586 ZyXEL Communication
vendor ALCOR 0x058f Alcor Micro
vendor IOMEGA 0x059b Iomega
vendor ATREND 0x059c A-Trend Technology
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor AID 0x059d Advanced Input Devices
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor LACIE 0x059f LaCie
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor OMNIVISION 0x05a9 OmniVision
vendor INSYSTEM 0x05ab In-System Design
vendor APPLE 0x05ac Apple Computer
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
vendor DIGI 0x05c5 Digi International
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor QTRONIX 0x05c7 Qtronix
vendor ELSA 0x05cc ELSA
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor BRAINBOXES 0x05d1 Brainboxes Limited
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
vendor ULTIMA 0x05d8 Ultima
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor AXIOHM 0x05d9 Axiohm Transaction Solutions
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor MICROTEK 0x05da Microtek
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
vendor SUNTAC 0x05db SUN Corporation
Lexar jumpSHOT Id. Submitted by: gshapiro
2001-04-17 15:34:22 +00:00
vendor LEXAR 0x05dc Lexar Media
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor SYMBOL 0x05e0 Symbol Technologies
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor GENESYS 0x05e3 Genesys Logic
vendor FUJI 0x05e5 Fuji Electric
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor KEITHLEY 0x05e6 Keithley Instruments
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor EIZONANAO 0x05e7 EIZO Nanao
Correct the vendor ID for KLSI: it's actually 0x5e9. 0x3e8 is the vendor ID for Aox Inc, which makes the controller engine and/or firmware for the KLSI chip.
2000-01-05 18:25:53 +00:00
vendor KLSI 0x05e9 Kawasaki LSI
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor FFC 0x05eb FFC
vendor ANKO 0x05ef Anko Electronic
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor PIENGINEERING 0x05f3 P.I. Engineering
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor AOC 0x05f6 AOC International
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor CHIC 0x05fe Chic Technology
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor BARCO 0x0600 Barco Display Systems
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BRIDGE 0x0607 Bridge Information
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor SOLIDYEAR 0x060b Solid Year
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor BIORAD 0x0614 Bio-Rad Laboratories
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor MACALLY 0x0618 Macally
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACTLABS 0x061c Act Labs
vendor ALARIS 0x0620 Alaris
vendor APEX 0x0624 Apex
vendor AVISION 0x0638 Avision
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
vendor TEAC 0x0644 TEAC
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor LINKSYS 0x066b Linksys
vendor ACERSA 0x066e Acer Semiconductor America
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor SIGMATEL 0x066f Sigmatel
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AIWA 0x0677 Aiwa
vendor ACARD 0x0678 ACARD Technology
vendor PROLIFIC 0x067b Prolific Technology
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
vendor SIEMENS 0x067c Siemens
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ADVANCELOGIC 0x0680 Avance Logic
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
vendor HAGIWARA 0x0693 Hagiwara Sys-Com
Add a new vendor: MINOLTA, and some products by them. Partially submitted by: asmodai
2002-04-06 12:27:23 +00:00
vendor MINOLTA 0x0686 Minolta
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
vendor CTX 0x0698 Chuntex
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ASKEY 0x069a Askey Computer
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor SAITEK 0x06a3 Saitek
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ALCATELT 0x06b9 Alcatel Telecom
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AGFA 0x06bd AGFA-Gevaert
vendor ASIAMD 0x06be Asia Microelectronic Development
vendor BIZLINK 0x06c4 Bizlink International
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor KEYSPAN 0x06cd Keyspan
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AASHIMA 0x06d6 Aashima Technology
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor MULTITECH 0x06e0 MultiTech
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ADS 0x06e1 ADS Technologies
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ALCATELM 0x06e4 Alcatel Microelectronics
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor SIRIUS 0x06ea Sirius Technologies
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor BOSTON 0x06fd Boston Acoustics
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor SMC 0x0707 Standard Microsystems
vendor PUTERCOM 0x0708 Putercom
vendor MCT 0x0711 MCT
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor DIGITALSTREAM 0x074e Digital Stream
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor AUREAL 0x0755 Aureal Semiconductor
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor MIDIMAN 0x0763 Midiman
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor GRIFFIN 0x077d Griffin Technology
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor SANDISK 0x0781 SanDisk Corp
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BRIMAX 0x078e Brimax
vendor AXIS 0x0792 Axis Communications
vendor ABL 0x0794 ABL Electronics
vendor ALFADATA 0x079d Alfadata Computer
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor NATIONALTECH 0x07a2 National Technical Systems
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ONNTO 0x07a3 Onnto
vendor BE 0x07a4 Be
vendor ADMTEK 0x07a6 ADMtek
Bunch of updates: - Add vendor/device ID for Corega USB-T ethernet adapter to necessary places so that it will work with the kue driver. - Add vendor/device ID for CATC Netmate devices for driver to be added soon. - Get really crazy about netisr stuff: avoid doing any mbuf allocations or deallocations at splbio/splusb. - Fix if_aue driver so that it works with LinkSys USB100TX: you need to flip the GPIO bits just the right way to put the PHY in the right mode.
2000-01-13 20:13:58 +00:00
vendor COREGA 0x07aa Corega
Add Freecom + product; Update NetBSD's copyright
2000-04-03 14:47:43 +00:00
vendor FREECOM 0x07ab Freecom
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor MICROTECH 0x07af Microtech
Add Olympus C-700
2001-10-23 22:44:03 +00:00
vendor OLYMPUS 0x07b4 Olympus
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ABOCOM 0x07b8 AboCom Systems
vendor KEISOKUGIKEN 0x07c1 Keisokugiken
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor APG 0x07c5 APG Cash Drawer
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BUG 0x07c8 B.U.G.
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ALLIEDTELESYN 0x07c9 Allied Telesyn International
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AVERMEDIA 0x07ca AVerMedia Technologies
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor SIIG 0x07cc SIIG
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor CASIO 0x07cf CASIO
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor APTIO 0x07d2 Aptio Products
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ARASAN 0x07da Arasan Chip Systems
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ALLIEDCABLE 0x07e6 Allied Cable
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
vendor STSN 0x07ef STSN
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ZOOM 0x0803 Zoom Telephonics
vendor BROADLOGIC 0x0827 BroadLogic
vendor HANDSPRING 0x082d Handspring
vendor ACTIONSTAR 0x0835 Action Star Enterprise
vendor PALM 0x0830 Palm Computing
vendor ACCTON 0x083a Accton Technology
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
vendor DIAMOND 0x0841 Diamond
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor NETGEAR 0x0846 BayNETGEAR
vendor ACTIVEWIRE 0x0854 ActiveWire
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor PORTGEAR 0x085a PortGear
Sync with NetBSD
2000-10-25 10:13:47 +00:00
vendor METRICOM 0x0870 Metricom
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ADESSOKBTEK 0x087c ADESSO/Kbtek America
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor JATON 0x087d Jaton
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor APT 0x0880 APT Technologies
vendor BOCARESEARCH 0x0885 Boca Research
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ANDREA 0x08a8 Andrea Electronics
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BURRBROWN 0x08bb Burr-Brown Japan
vendor 2WIRE 0x08c8 2Wire
vendor AIPTEK 0x08ca AIPTEK International
vendor SMARTBRIDGES 0x08d1 SmartBridges
vendor BILLIONTON 0x08dd Billionton Systems
vendor EXTENDED 0x08e9 Extended Systems
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
vendor MSYSTEMS 0x08ec M-Systems
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor AUTHENTEC 0x08ff AuthenTec
vendor ALATION 0x0910 Alation Systems
Add entries for: Belkin F5U103 Belkin F5U120-PC Hub GoHubs GoCOM232 Peracom single port USB-to-serial adapters. Reviewed by: n_hibma Approved by: obrien
2002-10-08 03:00:37 +00:00
vendor GOHUBS 0x0921 GoHubs
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor BIOMETRIC 0x0929 American Biometric Company
Additional Ids
2000-10-05 23:09:48 +00:00
vendor YANO 0x094f Yano
Add vendor ID for Kingston Technology and add device ID for KNU101TX USB ethernet adapter. (Yes, another one.)
2000-10-10 23:23:54 +00:00
vendor KINGSTON 0x0951 Kingston Technology
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BLUEWATER 0x0956 BlueWater Systems
vendor AGILENT 0x0957 Agilent Technologies
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor PORTSMITH 0x095a Portsmith
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ADIRONDACK 0x0976 Adirondack Wire & Cable
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BECKHOFF 0x0978 Beckhoff
vendor ALTIUS 0x09b3 Altius Solutions
vendor ARRIS 0x09c1 Arris Interactive
vendor ACTIVCARD 0x09c3 ACTIVCARD
vendor ACTISYS 0x09c4 ACTiSYS
vendor AFOURTECH 0x09da A-FOUR TECH
vendor AIMEX 0x09dc AIMEX
vendor ADDONICS 0x09df Addonics Technologies
vendor AKAI 0x09e8 AKAI professional M.I.
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ARESCOM 0x09f5 ARESCOM
Add 22 vendor IDs.
2000-03-20 19:49:20 +00:00
vendor BAY 0x09f9 Bay Associates
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
vendor ALTERA 0x09fb Altera
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
vendor TREK 0x0a16 Trek Technology
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ASAHIOPTICAL 0x0a17 Asahi Optical
vendor BOCASYSTEMS 0x0a43 Boca Systems
vendor BROADCOM 0x0a5c Broadcom
vendor GREENHOUSE 0x0a6b GREENHOUSE
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
vendor GEOCAST 0x0a79 Geocast Network Systems
Add NEODIO TURBOCONNECT (from NetBSD)
2003-01-02 04:21:04 +00:00
vendor NEODIO 0x0aec Neodio
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor TODOS 0x0b0c Todos Data System
vendor NEC2 0x0b62 NEC
vendor ATI2 0x0b6f ATI
Add Agate Q-Drive. Submitted by: Ian Cartwright <ian351c@home.com>
2001-04-02 13:11:59 +00:00
vendor AGATE 0x0c08 Agate Technologies
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor DMI 0x0c0b DMI
Add ID for Luwen EasyDisk USB flash memory drive. PR: 41081 Submitted by: demon MFC after: 5 days
2002-07-30 11:02:35 +00:00
vendor LUWEN 0x0c76 Luwen
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor MOTOROLA 0x1063 Motorola
vendor PLX 0x10b5 PLX
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor ASANTE 0x10bd Asante
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor BELKIN2 0x1293 Belkin Components
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor MOBILITY 0x1342 Mobility
vendor SHARK 0x13d2 Shark
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor SILICONPORTALS 0x1527 Silicon Portals
Add some missing usb vendors (from NetBSD).
2002-02-02 21:02:13 +00:00
vendor SOHOWARE 0x15e8 SOHOware
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor UMAX 0x1606 UMAX Data Systems
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor INSIDEOUT 0x1608 Inside Out Networks
vendor ENTREGA 0x1645 Entrega
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor ACTIONTEC 0x1668 Actiontec Electronics
vendor DLINK 0x2001 D-Link
Add support of PhotoClip USB Camera (http://www.myphotoclip.com): - Vendor&Device IDs for USB product, - quirk for SCSI CAM. PR: 34481 Submitted by: Olexander Kunytsa <kunia@x-telecom.net> MFC in: 3 days
2002-01-31 11:39:17 +00:00
vendor DAISY 0x3579 Daisy Technology
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
vendor INTEL 0x8086 Intel
Sync with NetBSD's version, dropping all the 'ltd', 'corp', etc. It's more important to keep this file easily syncable across the BSDs, and NetBSD have stated a preference for not adding them to theirs.
2002-02-02 20:59:43 +00:00
vendor HP2 0xf003 Hewlett Packard
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/*
* List of known products. Grouped by vendor.
*/
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* 3Com products */
product 3COM HOMECONN 0x009d HomeConnect USB Camera
product 3COM 3C19250 0x03E8 3C19250 Ethernet adapter
Add 4300C Id Submitted by: Ernst de Haan <ernst@heinz.jollem.com>
2001-04-30 17:37:11 +00:00
product 3COM USR56K 0x3021 U.S.Robotics 56000 Voice Faxmodem Pro
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product 3COM 3C460 0x11f8 HomeConnect 3C460
product 3COM 3C460B 0x4601 HomeConnect 3C460B
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product 3COMUSR OFFICECONN 0x0082 3Com OfficeConnect Analog Modem
product 3COMUSR USRISDN 0x008f 3Com U.S. Robotics Pro ISDN TA
product 3COMUSR HOMECONN 0x009d 3Com HomeConnect camera
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product 3COMUSR USR56K 0x3021 U.S.Robotics 56000 Voice Faxmodem Pro
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
/* AboCom products */
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product ABOCOM XX1 0x110c XX1
product ABOCOM XX2 0x200c XX2
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
product ABOCOM URE450 0x4000 URE450 Ethernet Adapter
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product ABOCOM UFE1000 0x4002 UFE1000 Fast Ethernet Adapter
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product ABOCOM DSB650TX_PNA 0x4003 1/10/100 ethernet adapter
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product ABOCOM XX4 0x4004 XX4
product ABOCOM XX5 0x4007 XX5
product ABOCOM XX6 0x400b XX6
product ABOCOM XX7 0x400c XX7
product ABOCOM XX8 0x4102 XX8
product ABOCOM XX9 0x4104 XX9
product ABOCOM XX10 0xabc1 XX10
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
/* Accton products */
Add entry for Accton USB320-EC Ethernet adapter. MFC after: 14
2001-09-09 03:07:15 +00:00
product ACCTON USB320_EC 0x1046 USB320-EC Ethernet Adapter
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product ACCTON SS1001 0x5046 SpeedStream Ethernet Adapter
Add entry for Accton USB320-EC Ethernet adapter. MFC after: 14
2001-09-09 03:07:15 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Acer Peripherals, Inc. products */
Add 80 vendor IDs.
2000-03-20 18:30:04 +00:00
product ACERP ACERSCAN_C310U 0x12a6 Acerscan C310U
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product ACERP ACERSCAN_320U 0x2022 Acerscan 320U
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product ACERP ACERSCAN_640U 0x2040 Acerscan 640U
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product ACERP ACERSCAN_620U 0x2060 Acerscan 620U
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* ActiveWire, Inc. products */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product ACTIVEWIRE IOBOARD 0x0100 I/O Board
product ACTIVEWIRE IOBOARD_FW1 0x0101 I/O Board, rev. 1 firmware
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* ADMtek products */
product ADMTEK PEGASUS 0x0986 AN986 USB Ethernet adapter
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product ADMTEK PEGASUSII 0x8511 AN8511 USB Ethernet adapter
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* ADS products */
product ADS UBS10BT 0x0008 UBS-10BT Ethernet adapter
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add Agate Q-Drive. Submitted by: Ian Cartwright <ian351c@home.com>
2001-04-02 13:11:59 +00:00
/* Agate Technologies products */
product AGATE QDRIVE 0x0378 Q-Drive
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
/* AGFA products */
product AGFA SNAPSCAN1212U 0x0001 SnapScan 1212U
Add some AGFA scanners: SnapScan 1236U SnapScan e20 SnapScan e25 SnapScan e26 SnapScan e40 SnapScan e50 SnapScan e52 PR: kern/32649 Submitted by: "Erik H. Bakke" <ebakke@trolltech.com>
2001-12-10 11:40:38 +00:00
product AGFA SNAPSCAN1236U 0x0002 SnapScan 1236U
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product AGFA SNAPSCANTOUCH 0x0100 SnapScan Touch
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product AGFA SNAPSCAN1212U2 0x2061 SnapScan 1212U
Add some AGFA scanners: SnapScan 1236U SnapScan e20 SnapScan e25 SnapScan e26 SnapScan e40 SnapScan e50 SnapScan e52 PR: kern/32649 Submitted by: "Erik H. Bakke" <ebakke@trolltech.com>
2001-12-10 11:40:38 +00:00
product AGFA SNAPSCANE40 0x208d SnapScan e40
product AGFA SNAPSCANE50 0x208f SnapScan e50
product AGFA SNAPSCANE20 0x2091 SnapScan e20
product AGFA SNAPSCANE25 0x2095 SnapScan e25
product AGFA SNAPSCANE26 0x2097 SnapScan e26
product AGFA SNAPSCANE52 0x20fd SnapScan e52
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* AKS products */
product AKS USBHASP 0x0001 USB-HASP 0.06
Add Sun keyboard and NetChip
2000-01-10 22:31:01 +00:00
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* Alcor Micro, Inc. products */
product ALCOR2 KBD_HUB 0x2802 Kbd Hub
product ALCOR MA_KBD_HUB 0x9213 MacAlly Kbd Hub
product ALCOR AU9814 0x9215 AU9814 Hub
product ALCOR SM_KBD 0x9410 MicroConnectors/StrongMan Keyboard
product ALCOR NEC_KBD_HUB 0x9472 NEC Kbd Hub
Add Alcor Keyboard with built-in hub and its keyboard.
2000-05-09 20:43:37 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Altec Lansing products */
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product ALTEC ADA70 0x0070 ADA70 Speakers
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product ALTEC ASC495 0xff05 ASC495 Speakers
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* American Power Conversion products */
product APC UPSPRO500 0x0002 Back-UPS Pro 500
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Anchor products */
product ANCHOR EZUSB 0x2131 EZUSB
Add the EzLink adapter Id
2000-05-01 20:26:12 +00:00
product ANCHOR EZLINK 0x2720 EZLINK
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* AOX, Inc. products */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product AOX USB101 0x0008 USB ethernet controller engine
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Apple Computer products */
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product APPLE OPTMOUSE 0x0302 Optical mouse
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product APPLE SPEAKERS 0x1101 Speakers
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* ATen products */
product ATEN UC1284 0x2001 Parallel printer adapter
product ATEN UC10T 0x2002 10Mbps ethernet adapter
Some new ids, from NetBSD
2000-08-06 23:22:13 +00:00
product ATEN UC232A 0x2008 Serial adapter
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
/* Atmel Comp. products */
product ATMEL UHB124 0x3301 UHB124 hub
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product ATMEL DWL120 0x7602 DWL-120 Wireless adapter
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
/* Avision products */
product AVISION 1200U 0x0268 1200U scanner
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Belkin products */
/*product BELKIN F5U111 0x???? F5U111 Ethernet adapter*/
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product BELKIN2 F5U002 0x0002 F5U002 Parallel printer adapter
Add support for a couple of network adapters; the 3Com 3C460B and the Belkin USB2LAN. Obtained from: NetBSD
2002-07-30 23:30:15 +00:00
product BELKIN USB2LAN 0x0121 USB to LAN Converter
Add entries for: Belkin F5U103 Belkin F5U120-PC Hub GoHubs GoCOM232 Peracom single port USB-to-serial adapters. Reviewed by: n_hibma Approved by: obrien
2002-10-08 03:00:37 +00:00
product BELKIN F5U103 0x0103 F5U103 Serial adapter
product BELKIN F5U120 0x1203 F5U120-PC Hub
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Billionton products */
product BILLIONTON USB100 0x0986 USB100N 10/100 FastEthernet Adapter
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product BILLIONTON USBLP100 0x0987 USB100LP
product BILLIONTON USBEL100 0x0988 USB100EL
product BILLIONTON USBE100 0x8511 USBE100
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Brother Industries products */
product BROTHER HL1050 0x0002 HL-1050 laser printer
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Behavior Technology Computer products */
product BTC BTC7932 0x6782 Keyboard with mouse port
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Canon, Inc. products */
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product CANON N656U 0x2206 CANOSCAN N656U
From NetBSD
2001-04-12 10:59:30 +00:00
product CANON S10 0x3041 PowerShot S10
product CANON S100 0x3045 PowerShot S100
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* CATC products */
product CATC NETMATE 0x000a Netmate ethernet adapter
product CATC NETMATE2 0x000c Netmate2 ethernet adapter
product CATC CHIEF 0x000d USB Chief Bus & Protocol Analyzer
product CATC ANDROMEDA 0x1237 Andromeda hub
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* CASIO products */
product CASIO NAMELAND 0x4001 CASIO Nameland EZ-USB
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Cherry products */
product CHERRY MY3000KBD 0x0001 My3000 keyboard
product CHERRY MY3000HUB 0x0003 My3000 hub
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Chic Technology products */
product CHIC MOUSE1 0x0001 mouse
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product CHIC CYPRESS 0x0003 Cypress USB Mouse
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Chicony products */
product CHICONY KB8933 0x0001 KB-8933 keyboard
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* Compaq products */
product COMPAQ PJB100 0x504a Personal Jukebox PJB100
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Connectix products */
product CONNECTIX QUICKCAM 0x0001 QuickCam
Add device driver support for USB ethernet adapters based on the Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com 3c19250 and the ADS Technologies USB-10BT. This device is 10mbs half-duplex only, so there's miibus or ifmedia support. This device also requires firmware to be loaded into it, however KLSI allows redistribution of the firmware images (I specifically asked about this; they said it was ok). Special thanks to Annelise Anderson for getting me in touch with KLSI (eventually) and thanks to KLSI for providing the necessary programming info. Highlights: - Add driver files to /sys/dev/usb - update usbdevs and regenerate attendate files - update usb_quirks.c - Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha - Update LINT, GENERIC and others for i386, alpha and pc98 - Add man page - Add module - Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Corega products */
product COREGA ETHER_USB_T 0x0001 Ether USB-T
Add Corega FEther USB-TX. Submitted by: iwasaki Approved by: jkh
2000-03-09 16:28:58 +00:00
product COREGA FETHER_USB_TX 0x0004 FEther USB-TX
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product COREGA FETHER_USB_TXS 0x000d FEther USB-TXS
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
/* Creative products */
* Correct a broken entry * Add the id for the Rio 800 USB. Submitted by: Wesley Morgan <morganw@chemikals.org>
2001-02-05 11:00:13 +00:00
product CREATIVE NOMAD_II 0x1002 Nomad II MP3 player
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* CTX products */
product CTX EX1300 0x9999 Ex1300 hub
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Cypress Semiconductor products */
product CYPRESS MOUSE 0x0001 mouse
product CYPRESS THERMO 0x0002 thermometer
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product CYPRESS FMRADIO 0x1002 FM Radio
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add support of PhotoClip USB Camera (http://www.myphotoclip.com): - Vendor&Device IDs for USB product, - quirk for SCSI CAM. PR: 34481 Submitted by: Olexander Kunytsa <kunia@x-telecom.net> MFC in: 3 days
2002-01-31 11:39:17 +00:00
/* Daisy Technology products */
Change Device ID string for DaisyTech devices. Submitted by: Olexander Kunytsa <kunia@istc.kiev.ua> MFC after: 1 week
2002-05-20 12:01:58 +00:00
product DAISY DMC 0x6901 USB MultiMedia Reader
Add support of PhotoClip USB Camera (http://www.myphotoclip.com): - Vendor&Device IDs for USB product, - quirk for SCSI CAM. PR: 34481 Submitted by: Olexander Kunytsa <kunia@x-telecom.net> MFC in: 3 days
2002-01-31 11:39:17 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Dallas Semiconductor products */
product DALLAS J6502 0x4201 J-6502 speakers
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Diamond products */
product DIAMOND RIO500USB 0x0001 Rio 500 USB
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Digi International products */
product DIGI ACCELEPORT2 0x0002 AccelePort USB 2
product DIGI ACCELEPORT4 0x0004 AccelePort USB 4
product DIGI ACCELEPORT8 0x0008 AccelePort USB 8
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* D-Link products */
/*product DLINK DSBS25 0x0100 DSB-S25 serial adapter*/
product DLINK DSB650TX4 0x200c 10/100 ethernet adapter
product DLINK DSB650C 0x4000 10Mbps ethernet adapter
product DLINK DSB650TX1 0x4001 10/100 ethernet adapter
product DLINK DSB650TX 0x4002 10/100 ethernet adapter
product DLINK DSB650TX_PNA 0x4003 1/10/100 ethernet adapter
product DLINK DSB650TX3 0x400b 10/100 ethernet adapter
product DLINK DSB650TX2 0x4102 10/100 ethernet adapter
product DLINK DSB650 0xabc1 10/100 ethernet adapter
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* EIZO products */
product EIZO HUB 0x0000 hub
product EIZO MONITOR 0x0001 monitor
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* Elecom products */
product ELECOM MOUSE29UO 0x0002 mouse 29UO
product ELECOM LDUSBTX0 0x200c LD-USB/TX
product ELECOM LDUSBTX1 0x4002 LD-USB/TX
Add a couple of new aue ethernet adapters from NetBSD: ELECOM LDUSBLTX IODATA USBETTXS
2002-05-27 00:00:48 +00:00
product ELECOM LDUSBLTX 0x4005 LD-USBL/TX
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product ELECOM LDUSBTX2 0x400b LD-USB/TX
Add another ucom device (ELECOM UC-SGT). Submitted by: akiyama
2002-07-10 00:43:10 +00:00
product ELECOM UCSGT 0x5003 UC-SGT
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product ELECOM LDUSBTX3 0xabc1 LD-USB/TX
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Elsa products */
product ELSA MODEM1 0x2265 ELSA Modem Board
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product ELSA USB2ETHERNET 0x3000 Microlink USB2Ethernet
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Entrega products */
product ENTREGA 1S 0x0001 1S serial connector
product ENTREGA 2S 0x0002 2S serial connector
product ENTREGA 1S25 0x0003 1S25 serial connector
product ENTREGA 4S 0x0004 4S serial connector
product ENTREGA E45 0x0005 E45 Ethernet adapter
product ENTREGA CENTRONICS 0x0006 Centronics connector
product ENTREGA 1S9 0x0093 1S9 serial connector
product ENTREGA EZUSB 0x8000 EZ-USB
/*product ENTREGA SERIAL 0x8001 DB25 Serial connector*/
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product ENTREGA 2U4S 0x8004 2U4S serial connector/usb hub
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/*product ENTREGA SERIAL_DB9 0x8093 DB9 Serial connector*/
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Epson products */
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product EPSON PRINTER1 0x0001 USB Printer
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product EPSON PRINTER2 0x0002 ISD USB Smart Cable for Mac
product EPSON PRINTER3 0x0003 ISD USB Smart Cable
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product EPSON PRINTER5 0x0005 USB Printer
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product EPSON 636 0x0101 Perfection 636U / 636Photo scanner
product EPSON 610 0x0103 Perfection 610 scanner
product EPSON 1200 0x0104 Perfection 1200U / 1200Photo scanner
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product EPSON 1600 0x0107 Expression 1600 scanner
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product EPSON 1640 0x010a Perfection 1640SU scanner
product EPSON 1240 0x010b Perfection 1240U / 1240Photo scanner
Merge from NetBSD. Add lots of new scanner devices: AGFA SNAPSCAN1236U AGFA SNAPSCANE40 AGFA SNAPSCANE50 AGFA SNAPSCANE20 AGFA SNAPSCANE25 AGFA SNAPSCANE26 AGFA SNAPSCANE52 CANON N656U HP 3400CSE SCANLOGIC 336CX MUSTEK BEARPAW1200F MUSTEK 600USB MUSTEK 1200USBPLUS NATIONAL BEARPAW2400 EPSON 640U EPSON 1650 EPSON GT9700F UMAX ASTRA3400 ULTIMA 1200UBPLUS
2002-02-11 03:35:53 +00:00
product EPSON 640U 0x010c Perfection 640U scanner
product EPSON 1650 0x0110 Perfection 1650 scanner
product EPSON GT9700F 0x0112 GT-9700F scanner
Support for the "Seiko Epson Perfection 1260 scanner". Submitted by: Michael Lestinsky <michael@lestinsky.de> MFC After: 3 days
2003-01-20 00:41:30 +00:00
product EPSON 1260 0x011d Perfection 1260 scanner
Put the Perfection 1660 scanner entry in the right place. (Entries are sorted by product id).
2003-01-27 09:43:24 +00:00
product EPSON 1660 0x011e Perfection 1660 scanner
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* e-TEK Labs products */
product ETEK 1COM 0x8007 Serial port
/* Extended Systems products */
product EXTENDED XTNDACCESS 0x0100 XTNDAccess IrDA
Add entries for: Belkin F5U103 Belkin F5U120-PC Hub GoHubs GoCOM232 Peracom single port USB-to-serial adapters. Reviewed by: n_hibma Approved by: obrien
2002-10-08 03:00:37 +00:00
/* GoHubs products */
product GOHUBS GOCOM232 0x1001 GoCOM232 Serial converter
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Gravis products */
product GRAVIS GAMEPADPRO 0x4001 GamePad Pro
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* GREENHOUSE products */
product GREENHOUSE KANA21 0x0001 CF-writer with Portable MP3 Player
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Griffin Technology */
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
product GRIFFIN IMATE 0x0405 iMate, ADB adapter
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
Add Freecom + product; Update NetBSD's copyright
2000-04-03 14:47:43 +00:00
/* Freecom products */
product FREECOM DVD 0xfc01 Connector for DVD drive
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Future Technology Devices products */
MFNetBSD: FTDI USB-serial converter chips description.
2002-07-25 14:15:49 +00:00
product FTDI SERIAL_8U100AX 0x8372 8U100AX Serial converter
product FTDI SERIAL_8U232AM 0x6001 8U232AM Serial converter
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Sync with NetBSD
2000-10-25 10:13:47 +00:00
/* Fuji photo products */
product FUJIPHOTO MASS0100 0x0100 Mass Storage
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
/* Hagiwara products */
product HAGIWARA FGSM 0x0002 FlashGate SmartMedia Card Reader
product HAGIWARA FGCF 0x0003 FlashGate CompactFlash Card Reader
product HAGIWARA FG 0x0005 FlashGate
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Handspring, Inc. */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product HANDSPRING VISOR 0x0100 Handspring Visor
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Hauppauge Computer Works */
product HAUPPAUGE WINTV_USB_FM 0x4d12 WinTV USB FM
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* HP products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 895C 0x0004 DeskJet 895C
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product HP 4100C 0x0101 Scanjet 4100C
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product HP S20 0x0102 Photosmart S20
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 880C 0x0104 DeskJet 880C
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product HP 4200C 0x0105 ScanJet 4200C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP CDWRITERPLUS 0x0107 CD-Writer Plus
product HP KBDHUB 0x010c Multimedia Keyboard Hub
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product HP 6200C 0x0201 ScanJet 6200C
product HP S20b 0x0202 PhotoSmart S20
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 815C 0x0204 DeskJet 815C
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product HP 3300C 0x0205 ScanJet 3300C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP CDW8200 0x0207 CD-Writer Plus 8200e
Fix a typo in the definition of HP1220C and add a quick entry for broken bidir mode for at as well.
2002-04-06 13:28:02 +00:00
product HP 1220C 0x0212 DeskJet 1220C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 810C 0x0304 DeskJet 810C/812C
product HP 4300C 0x0305 Scanjet 4300C
product HP G85XI 0x0311 OfficeJet G85xi
Add an entry for HP LaserJet 1200.
2002-04-08 10:16:19 +00:00
product HP 1200 0x0317 LaserJet 1200
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product HP 5200C 0x0401 Scanjet 5200C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 830C 0x0404 DeskJet 830C
product HP 3400CSE 0x0405 ScanJet 3400cse
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product HP 6300C 0x0601 Scanjet 6300C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 840C 0x0604 DeskJet 840c
Add the HP ScanJet 2200C.
2002-07-31 09:07:56 +00:00
product HP 2200C 0x0605 ScanJet 2200C
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product HP 5300C 0x0701 Scanjet 5300C
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product HP 970CSE 0x1004 Deskjet 970Cse
Add some more printer devices: DeskJet 1220C from phk Scanjet 5400C from NetBSD Inkjet P-2000U from NetBSD
2002-04-06 13:06:07 +00:00
product HP 5400C 0x1005 Scanjet 5400C
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 930C 0x1204 DeskJet 930c
Add some more printer devices: DeskJet 1220C from phk Scanjet 5400C from NetBSD Inkjet P-2000U from NetBSD
2002-04-06 13:06:07 +00:00
product HP P2000U 0x1801 Inkjet P-2000U
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product HP 640C 0x2004 DeskJet 640c
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product HP P1100 0x3102 Photosmart P1100
Add HP PhotoSmart C500 id. PR: kern/21841 Submitted by: josh@zipperup.org
2000-10-08 21:31:39 +00:00
Sync with NetBSD
2000-10-25 10:13:47 +00:00
/* HP products */
Add HP PhotoSmart C500 id. PR: kern/21841 Submitted by: josh@zipperup.org
2000-10-08 21:31:39 +00:00
product HP2 C500 0x6002 PhotoSmart C500
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add vendor IBM product USB CD-ROM Drive
2000-08-26 05:06:40 +00:00
/* IBM Corporation */
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product IBM USBCDROMDRIVE 0x4427 USB CD-ROM Drive
Add vendor IBM product USB CD-ROM Drive
2000-08-26 05:06:40 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Inside Out Networks products */
product INSIDEOUT EDGEPORT4 0x0001 EdgePort/4 serial ports
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* In-System products */
product INSYSTEM F5U002 0x0002 Parallel printer adapter
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product INSYSTEM ATAPI 0x0031 ATAPI adapter
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product INSYSTEM ISD110 0x0200 IDE adapter ISD110
product INSYSTEM ISD105 0x0202 IDE adapter ISD105
InSystem USB Cable (IDE adapter) Submitted by: "Sean O'Connell" <sean@stat.duke.edu>
2000-06-08 19:26:16 +00:00
product INSYSTEM USBCABLE 0x081a USB cable
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Intel products */
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product INTEL EASYPC_CAMERA 0x0110 Easy PC Camera
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product INTEL TESTBOARD 0x9890 82930 test board
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* I/O DATA products */
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product IODATA USBETT 0x0901 USB ETT
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product IODATA USBETTX 0x0904 USB ETTX
Add a couple of new aue ethernet adapters from NetBSD: ELECOM LDUSBLTX IODATA USBETTXS
2002-05-27 00:00:48 +00:00
product IODATA USBETTXS 0x0913 USB ETTX
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
product IODATA USBRSAQ 0x0a03 USB serial adapter USB-RSAQ1
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Iomega products */
product IOMEGA ZIP100 0x0001 Zip 100
Add Zip 250
2000-04-06 10:16:24 +00:00
product IOMEGA ZIP250 0x0030 Zip 250
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Kawasaki products */
product KLSI DUH3E10BT 0x0008 USB ethernet controller engine
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Kawatsu products */
product KAWATSU MH4000P 0x0003 MiniHub 4000P
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add ID (Keisokugiken Corp. HKS-0200 USBDAQ)
2000-03-29 15:07:20 +00:00
/* Keisokugiken Corp. products */
product KEISOKUGIKEN USBDAQ 0x0068 HKS-0200 USBDAQ
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
/* Kawasaki products */
Add vendor/product ID for two more KLSI-based devices, including a USB ethernet adapter being handed out by @Home.
2000-03-29 19:44:48 +00:00
product KLSI DUH3E10BT 0x0008 10BT Ethernet adapter, in the DU-H3E
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Kensington products */
product KENSINGTON ORBIT 0x1003 Orbit USB/PS2 trackball
product KENSINGTON TURBOBALL 0x1005 TurboBall
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Keyspan products */
product KEYSPAN USA28 0x0101 USA-28 serial adapter
product KEYSPAN USA28X 0x0102 USA-28X serial adapter
product KEYSPAN USA19 0x0103 USA-19 serial adapter
product KEYSPAN USA18X 0x0105 USA-18X serial adapter
product KEYSPAN USA19W 0x0106 USA-19W serial adapter
product KEYSPAN USA49W 0x0109 USA-49W serial adapter
Add vendor ID for Kingston Technology and add device ID for KNU101TX USB ethernet adapter. (Yes, another one.)
2000-10-10 23:23:54 +00:00
/* Kingston products */
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product KINGSTON KNU101TX 0x000a KNU101TX USB Ethernet
Add vendor ID for Kingston Technology and add device ID for KNU101TX USB ethernet adapter. (Yes, another one.)
2000-10-10 23:23:54 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Kodak products */
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product KODAK DC220 0x0100 Digital Science DC220
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product KODAK DC260 0x0110 Digital Science DC260
product KODAK DC265 0x0111 Digital Science DC265
Correct the entry for the Kodak DC290. Submitted By: Oliver Fromme <olli@dorifer.heim3.tu-clausthal.de>
2000-01-28 10:26:29 +00:00
product KODAK DC290 0x0112 Digital Science DC290
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product KODAK DC240 0x0120 Digital Science DC240
product KODAK DC280 0x0130 Digital Science DC280
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Konica Corp. Products */
product KONICA CAMERA 0x0720 Digital Color Camera
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* KYE products */
product KYE NICHE 0x0001 Niche mouse
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product KYE NETSCROLL 0x0003 Genius NetScroll mouse
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product KYE FLIGHT2000 0x1004 Flight 2000 joystick
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product KYE VIVIDPRO 0x2001 ColorPage Vivid-Pro scanner
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* LaCie products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product LACIE HD 0xa601 Hard Disk
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product LACIE CDRW 0xa602 CD R/W
Lexar jumpSHOT Id. Submitted by: gshapiro
2001-04-17 15:34:22 +00:00
/* Lexar products */
product LEXAR JUMPSHOT 0x0001 jumpSHOT CompactFlash Reader
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Lexmark products */
product LEXMARK S2450 0x0009 Optra S 2450
/* Linksys products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product LINKSYS MAUSB2 0x0105 Camedia MAUSB-2
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product LINKSYS USB10TX1 0x200c USB10TX
Add device ID for LinkSys USB10T ethernet adapter (0x2202).
2000-03-21 15:18:51 +00:00
product LINKSYS USB10T 0x2202 USB10T Ethernet
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product LINKSYS USB100TX 0x2203 USB100TX Ethernet
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product LINKSYS USB100H1 0x2204 USB100H1 Ethernet/HPNA
Add support for the LinkSys USB10T network adapter that contains the ADMtek Pegasus AN986 USB chipset. The adapter supports both 10BaseT and 100BaseT (including full-duplex). The product code for these adapters is 0x2206.
2000-04-02 12:43:34 +00:00
product LINKSYS USB10TA 0x2206 USB10TA Ethernet
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product LINKSYS USB10TX2 0x400b USB10TX
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Logitech products */
product LOGITECH M2452 0x0203 M2452 keyboard
product LOGITECH M4848 0x0301 M4848 mouse
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product LOGITECH PAGESCAN 0x040f PageScan
product LOGITECH QUICKCAMWEB 0x0801 QuickCam Web
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
product LOGITECH QUICKCAMPRO 0x0810 QuickCam Pro
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product LOGITECH QUICKCAMEXP 0x0840 QuickCam Express
product LOGITECH QUICKCAM 0x0850 QuickCam
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product LOGITECH N43 0xc000 N43
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
product LOGITECH N48 0xc001 N48 mouse
product LOGITECH MBA47 0xc002 M-BA47 mouse
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product LOGITECH WMMOUSE 0xc004 WingMan Gaming Mouse
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product LOGITECH BD58 0xc00c BD58 mouse
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product LOGITECH UN58A 0xc030 iFeel Mouse
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product LOGITECH BB13 0xc401 USB-PS/2 Trackball
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product LOGITECH WMPAD 0xc208 WingMan GamePad Extreme
product LOGITECH WMJOY 0xc281 WingMan Force joystick
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product LOGITECH RK53 0xc501 Cordless mouse
product LOGITECH RB6 0xc503 Cordless keyboard
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product LOGITECH QUICKCAMPRO2 0xd001 QuickCam Pro
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Lucent products */
product LUCENT EVALKIT 0x1001 USS-720 evaluation kit
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add ID for Luwen EasyDisk USB flash memory drive. PR: 41081 Submitted by: demon MFC after: 5 days
2002-07-30 11:02:35 +00:00
/* Luwen products */
product LUWEN EASYDISK 0x0005 EasyDisc
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* Macally products */
product MACALLY MOUSE1 0x0101 mouse
Sync with NetBSD
2000-05-07 19:44:16 +00:00
/* MCT Corp. */
product MCT HUB0100 0x0100 Hub
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
product MCT DU_H3SP_USB232 0x0200 D-Link DU-H3SP USB BAY Hub
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product MCT USB232 0x0210 USB-232 Interface
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product MCT SITECOM_USB232 0x0230 Sitecom USB-232 Products
Sync with NetBSD
2000-05-07 19:44:16 +00:00
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Melco, Inc products */
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product MELCO LUATX1 0x0001 LUA-TX Ethernet
product MELCO LUATX5 0x0005 LUA-TX Ethernet
Add Melco LUA2-TX5.
2001-11-19 18:40:17 +00:00
product MELCO LUA2TX5 0x0009 LUA2-TX Ethernet
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Sync with NetBSD
2000-10-25 10:13:47 +00:00
/* Metricom products */
product METRICOM RICOCHET_GS 0x0001 Ricochet GS
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Microsoft products */
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product MICROSOFT SIDEPREC 0x0008 SideWinder Precision Pro
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product MICROSOFT INTELLIMOUSE 0x0009 IntelliMouse
product MICROSOFT NATURALKBD 0x000b Natural Keyboard Elite
product MICROSOFT DDS80 0x0014 Digital Sound System 80
product MICROSOFT SIDEWINDER 0x001a Sidewinder Precision Racing Wheel
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product MICROSOFT INTELLIEYE 0x0025 IntelliEye mouse
product MICROSOFT INETPRO 0x002b Internet Keyboard Pro
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Microtech products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product MICROTECH SCSIDB25 0x0004 USB-SCSI-DB25
product MICROTECH SCSIHD50 0x0005 USB-SCSI-HD50
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product MICROTECH DPCM 0x0006 USB CameraMate
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product MICROTECH FREECOM 0xfc01 Freecom USB-IDE
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
/* Microtek products */
product MICROTEK 336CX 0x0094 Phantom 336CX - C3 scanner
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product MICROTEK X6U 0x0099 ScanMaker X6 - X6U
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product MICROTEK C6 0x009a Phantom C6 scanner
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product MICROTEK 336CX2 0x00a0 Phantom 336CX - C3 scanner
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product MICROTEK V6USL 0x00a3 ScanMaker V6USL
Fix typo's
2000-09-05 12:26:37 +00:00
product MICROTEK V6USL2 0x80a3 ScanMaker V6USL
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product MICROTEK V6UL 0x80ac ScanMaker V6UL
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Midiman products */
product MIDIMAN MIDISPORT2X2 0x1001 Midisport 2x2
Add a new vendor: MINOLTA, and some products by them. Partially submitted by: asmodai
2002-04-06 12:27:23 +00:00
/* Minolta Co., Ltd. */
product MINOLTA 2300 0x4001 Dimage 2300
product MINOLTA S304 0x4007 Dimage S304
product MINOLTA X 0x4009 Dimage X
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* Mitsumi products */
product MITSUMI CDRRW 0x0000 CD-R/RW Drive
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Motorola products */
product MOTOROLA MC141555 0x1555 MC141555 hub controller
Add the vendor/device IDs for the LinkSys USB100TX. Note: the .INF file for LinkSys's driver says the vendor ID is 0x66b, however this does not agree with the vendor ID listed for LinkSys in the company list from www.usb.org. In fact, 0x66b doesn't seem to appear in the company list at all. Furthermore, this same vendor ID crops up in some of the D-Link .INF files. Frankly I don't know what the heck is going on here, but I need to add 0x66b to usbdevs and call it something, so here we are.
2000-01-08 07:32:48 +00:00
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* MultiTech products */
product MULTITECH ATLAS 0xf101 MT5634ZBA-USB modem
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Mustek products */
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product MUSTEK 1200CU 0x0001 1200 CU scanner
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product MUSTEK 600CU 0x0002 600 CU scanner
product MUSTEK 1200USB 0x0003 1200 USB scanner
product MUSTEK 1200UB 0x0006 1200 UB scanner
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
product MUSTEK 1200USBPLUS 0x0007 1200 USB Plus scanner
Add Mustek 1200 CU Plus scanner. Submitted by: "Ilmar S. Habibulin" <ilmar@watson.org>
2001-11-28 12:37:04 +00:00
product MUSTEK 1200CUPLUS 0x0008 1200 CU Plus scanner
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
product MUSTEK BEARPAW1200F 0x0010 BearPaw 1200F scanner
product MUSTEK 600USB 0x0873 600 USB scanner
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product MUSTEK MDC800 0xa800 MDC-800 digital camera
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* M-Systems products */
product MSYSTEMS DISKONKEY 0x0010 DiskOnKey
Sync with NetBSD
2000-10-25 10:13:47 +00:00
/* National Semiconductor */
Update comments and product identifiers so that they're the same as NetBSD's definitions.
2002-02-02 21:09:54 +00:00
product NATIONAL BEARPAW1200 0x1000 BearPaw 1200
product NATIONAL BEARPAW2400 0x1001 BearPaw 2400
Sync with NetBSD
2000-10-25 10:13:47 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* NEC products */
product NEC HUB 0x55aa hub
product NEC HUB_B 0x55ab hub
Add the vendor and device IDs for a whole bunch of additional USB ethernet adapters that are supported by the aue and kue drivers. There are actually a couple more out there from Accton, Asante and EXP Computer, however I was not able to find any Windows device drivers for these on their servers, and hence could not harvest their vendor/device ID info. If somebody has one of these things and can look in the .inf file that comes with the Windows driver, I'd appreciate knowing what it says for 'VID' and 'PID.' Additional adapters include: the D-Link DSB-650 and DSB-650TX, the SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101. These are all mentioned in the man pages, relnotes and LINT. Also correct the date in the kue(4) man page. I wrote this thing on Jan, 4 2000, not 1999.
2000-01-07 22:18:49 +00:00
Add NEODIO TURBOCONNECT (from NetBSD)
2003-01-02 04:21:04 +00:00
/* NEODIO products */
product NEODIO ND5010 0x5010 Multi-format Flash Controller
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* NetChip Technology Products */
product NETCHIP TURBOCONNECT 0x1080 Turbo-Connect
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Netgear products */
product NETGEAR EA101 0x1001 Ethernet adapter
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Nikon E990 and Nomad MP3 player Ids. Submitted by: pete@altadena.net
2001-01-18 00:15:49 +00:00
/* Nikon products */
product NIKON E990 0x0102 Digital Camera E990
Add Olympus C-700
2001-10-23 22:44:03 +00:00
/* Olympus products */
Add Olympus C-1.
2001-11-23 16:35:40 +00:00
product OLYMPUS C1 0x0102 C-1 Digital Camera
Add Olympus C-700
2001-10-23 22:44:03 +00:00
product OLYMPUS C700 0x0105 C-700 Ultra Zoom
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* OmniVision Technologies, Inc. products */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product OMNIVISION OV511 0x0511 OV511 Camera
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product OMNIVISION OV511PLUS 0xa511 OV511+ Camera
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Palm Computing, Inc. product */
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product PALM SERIAL 0x0080 USB Serial Adaptor
MFNetBSD: uvisor.c (1.14, 1.15) Add support for Palm (M500, M505, M125) and Sony devices (Clie 4.0 and 4.1).
2002-07-31 10:05:26 +00:00
product PALM M500 0x0001 Palm m500
product PALM M505 0x0002 Palm m505
Add Palm M515. Submitted by: Luiz Eduardo Roncato Cordeiro <cordeiro@nic.br>
2002-08-11 21:11:14 +00:00
product PALM M515 0x0003 Palm m515
MFNetBSD: uvisor.c (1.14, 1.15) Add support for Palm (M500, M505, M125) and Sony devices (Clie 4.0 and 4.1).
2002-07-31 10:05:26 +00:00
product PALM M125 0x0040 Palm m125
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
/* Panasonic products */
product PANASONIC SDCAAE 0x1b00 MultiMediaCard Adapter
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Peracom products */
product PERACOM SERIAL1 0x0001 Serial Converter
product PERACOM ENET 0x0002 Ethernet adapter
Add vendor/product ID for two more KLSI-based devices, including a USB ethernet adapter being handed out by @Home.
2000-03-29 19:44:48 +00:00
product PERACOM ENET3 0x0003 At Home Ethernet Adapter
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product PERACOM ENET2 0x0005 Ethernet adapter
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Philips products */
product PHILIPS DSS350 0x0101 DSS 350 Digital Speaker System
product PHILIPS DSS 0x0104 DSS XXX Digital Speaker System
product PHILIPS HUB 0x0201 hub
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product PHILIPS PCA646VC 0x0303 PCA646VC PC Camera
Sync with NetBSD
2000-05-07 19:44:16 +00:00
product PHILIPS PCVC680K 0x0308 PCVC680K Vesta Pro PC Camera
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product PHILIPS DSS150 0x0471 DSS 150 Digital Speaker System
Add DIVA USB mp3 player. Submitted by: Olexander Kunytsa <kunia@x-telecom.net> MFC after: 3 days
2001-12-12 15:58:23 +00:00
product PHILIPS DIVAUSB 0x1801 DIVA USB mp3 player
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
/* Philips Semiconductor products */
product PHILIPSSEMI HUB1122 0x1122 hub
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* P.I. Engineering products */
product PIENGINEERING PS2USB 0x020b PS2 to Mac USB Adapter
/* PLX products */
product PLX TESTBOARD 0x9060 test board
/* Primax products */
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product PRIMAX G2X300 0x0300 G2-200 scanner
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product PRIMAX G2E300 0x0301 G2E-300 scanner
product PRIMAX G2300 0x0302 G2-300 scanner
product PRIMAX G2E3002 0x0303 G2E-300 scanner
product PRIMAX 9600 0x0340 Colorado USB 9600 scanner
product PRIMAX 600U 0x0341 Colorado 600u scanner
Add the Primax (Visioneer) 6200 scanner. Obtained from: OpenBSD (via NetBSD)
2002-07-31 08:51:32 +00:00
product PRIMAX 6200 0x0345 Visioneer 6200 scanner
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product PRIMAX 19200 0x0360 Colorado USB 19200 scanner
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product PRIMAX 1200U 0x0361 Colorado 1200u scanner
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product PRIMAX G600 0x0380 G2-600 scanner
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product PRIMAX 636I 0x0381 ReadyScan 636i
product PRIMAX G2600 0x0382 G2-600 scanner
product PRIMAX G2E600 0x0383 G2E-600 scanner
product PRIMAX COMFORT 0x4d01 Comfort
product PRIMAX MOUSEINABOX 0x4d02 Mouse-in-a-Box
product PRIMAX PCGAUMS1 0x4d04 Sony PCGA-UMS1
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
Sync with NetBSD
2000-05-07 19:44:16 +00:00
/* Prolific products */
product PROLIFIC PL2301 0x0000 PL2301 Host-Host interface
product PROLIFIC PL2302 0x0001 PL2302 Host-Host interface
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product PROLIFIC RSAQ2 0x04bb PL2303 Serial adapter (IODATA USB-RSAQ2)
product PROLIFIC PL2303 0x2303 PL2303 Serial adapter (ATEN/IOGEAR UC232A)
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product PROLIFIC PL2305 0x2305 Parallel printer adapter
Add product ID (Prolific ATAPI-4 Bridge Controller). Reported by: "K.Sumitani" <sumitani@bd2.hnes.nec.co.jp>
2000-09-05 16:00:55 +00:00
product PROLIFIC ATAPI4 0x2307 ATAPI-4 Bridge Controller
Sync with NetBSD
2000-05-07 19:44:16 +00:00
From NetBSD
2001-04-12 10:59:30 +00:00
/* Putercom products */
product PUTERCOM UPA100 0x047e USB-1284 BRIDGE
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Qtronix products */
product QTRONIX 980N 0x2011 Scorpion-980N keyboard
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Quickshot products */
product QUICKSHOT STRIKEPAD 0x6238 USB StrikePad
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Rainbow Technologies products */
product RAINBOW IKEY2000 0x1200 i-Key 2000
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
/* Roland products */
product ROLAND UM1 0x0009 UM-1 MIDI I/F
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product ROLAND UM880N 0x0014 EDIROL UM-880 MIDI I/F (native)
product ROLAND UM880G 0x0015 EDIROL UM-880 MIDI I/F (generic)
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Rockfire products */
product ROCKFIRE GAMEPAD 0x2033 gamepad 203USB
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* RATOC Systems products */
Add a USB comm driver. Ported from NetBSD by: akiyama
2002-03-18 18:23:42 +00:00
product RATOC REXUSB60 0xb000 USB serial adapter REX-USB60
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* SanDisk products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SANDISK SDDR05A 0x0001 ImageMate SDDR-05a
product SANDISK SDDR31 0x0002 ImageMate SDDR-31
product SANDISK SDDR12 0x0100 ImageMate SDDR-12
product SANDISK SDDR09 0x0200 ImageMate SDDR-09
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Add Sanyo SCP-4900 phone. It needs quirks.
2003-01-01 20:18:15 +00:00
/* Sanyo Electric products */
product SANYO SCP4900 0x0701 Sanyo SCP-4900 USB Phone
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
/* ScanLogic products */
Add Scanlogic SL11R IDE Adapter.
2002-04-07 13:45:24 +00:00
product SCANLOGIC SL11R 0x0002 SL11R IDE Adapter
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product SCANLOGIC 336CX 0x0300 Phantom 336CX - C3 scanner
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Shuttle Technology products */
product SHUTTLE EUSB 0x0001 E-USB Bridge
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SHUTTLE EUSCSI 0x0002 eUSCSI Bridge
product SHUTTLE SDDR09 0x0003 ImageMate SDDR09
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
product SHUTTLE ZIOMMC 0x0006 eUSB MultiMediaCard Adapter
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SHUTTLE HIFD 0x0007 Sony Hifd
product SHUTTLE EUSBATAPI 0x0009 eUSB ATA/ATAPI Adapter
product SHUTTLE CF 0x000a eUSB CompactFlash Adapter
product SHUTTLE EUSCSI_B 0x000b eUSCSI Bridge
product SHUTTLE EUSCSI_C 0x000c eUSCSI Bridge
product SHUTTLE CDRW 0x0101 CD-RW Device
Bunch of updates: - Add vendor/device ID for Corega USB-T ethernet adapter to necessary places so that it will work with the kue driver. - Add vendor/device ID for CATC Netmate devices for driver to be added soon. - Get really crazy about netisr stuff: avoid doing any mbuf allocations or deallocations at splbio/splusb. - Fix if_aue driver so that it works with LinkSys USB100TX: you need to flip the GPIO bits just the right way to put the PHY in the right mode.
2000-01-13 20:13:58 +00:00
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
/* Siemens products */
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
product SIEMENS SPEEDSTREAM 0x1001 SpeedStream USB
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
/* SIIG products */
product SIIG DIGIFILMREADER 0x0004 DigiFilm-Combo Reader
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
/* Silicon Portals Inc. */
product SILICONPORTALS YAPPH_NF 0x0200 YAP Phone (no firmware)
product SILICONPORTALS YAPPHONE 0x0201 YAP Phone
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Sirius Technologies products */
product SIRIUS ROADSTER 0x0001 NetComm Roadster II 56 USB
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
Add entry for SmartBridges SmartLink USB ethernet adapter.
2000-04-14 14:43:34 +00:00
/* SmartBridges products */
product SMARTBRIDGES SMARTLINK 0x0001 SmartLink USB ethernet adapter
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
product SMARTBRIDGES SMARTNIC 0x0003 smartNIC 2 PnP Adapter
Add entry for SmartBridges SmartLink USB ethernet adapter.
2000-04-14 14:43:34 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* SMC products */
product SMC 2102USB 0x0100 10Mbps ethernet adapter
product SMC 2202USB 0x0200 10/100 ethernet adapter
MFNetBSD: Add support for the SMC 2206USB/ETH EZ Connect adapter (Pegasus II)
2002-07-09 16:45:03 +00:00
product SMC 2206USB 0x0201 EZ Connect USB Ethernet Adapter
Add another SMC device ID and the hub ID that it went with.
2002-03-19 10:54:40 +00:00
product SMC2 2020HUB 0x2020 USB Hub
Add more usb adapters, from NetBSD.
2002-03-31 21:38:05 +00:00
/* SOHOware products */
product SOHOWARE NUB100 0x9100 10/100 USB Ethernet
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* SOLID YEAR products */
product SOLIDYEAR KEYBOARD 0x2101 Solid Year USB keyboard
Add the vendor and device IDs for a whole bunch of additional USB ethernet adapters that are supported by the aue and kue drivers. There are actually a couple more out there from Accton, Asante and EXP Computer, however I was not able to find any Windows device drivers for these on their servers, and hence could not harvest their vendor/device ID info. If somebody has one of these things and can look in the .inf file that comes with the Windows driver, I'd appreciate knowing what it says for 'VID' and 'PID.' Additional adapters include: the D-Link DSB-650 and DSB-650TX, the SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101. These are all mentioned in the man pages, relnotes and LINT. Also correct the date in the kue(4) man page. I wrote this thing on Jan, 4 2000, not 1999.
2000-01-07 22:18:49 +00:00
Add the id for the Sony memory sticks.
2000-09-04 15:29:42 +00:00
/* SONY products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product SONY DSC 0x0010 DSC cameras
product SONY MSACUS1 0x002d Memorystick MSAC-US1
product SONY MSC 0x0032 MSC memory stick slot
MFNetBSD: uvisor.c (1.14, 1.15) Add support for Palm (M500, M505, M125) and Sony devices (Clie 4.0 and 4.1).
2002-07-31 10:05:26 +00:00
product SONY CLIE_40 0x0066 Sony Clie v4.0
product SONY CLIE_41 0x009a Sony Clie v4.1
Add the id for the Sony memory sticks.
2000-09-04 15:29:42 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* STMicroelectronics products */
product STMICRO COMMUNICATOR 0x7554 USB Communicator
This commit adds device driver support for the ADMtek AN986 Pegasus USB ethernet chip. Adapters that use this chip include the LinkSys USB100TX. There are a few others, but I'm not certain of their availability in the U.S. I used an ADMtek eval board for development. Note that while the ADMtek chip is a 100Mbps device, you can't really get 100Mbps speeds over USB. Regardless, this driver uses miibus to allow speed and duplex mode selection as well as autonegotiation. Building and kldloading the driver as a module is also supported. Note that in order to make this driver work, I had to make what some may consider an ugly hack to sys/dev/usb/usbdi.c. The usbd_transfer() function will use tsleep() for synchronous transfers that don't complete right away. This is a problem since there are times when we need to do sync transfers from an interrupt context (i.e. when reading registers from the MAC via the control endpoint), where tsleep() us a no-no. My hack allows the driver to have the code poll for transfer completion subject to the xfer->timeout timeout rather that calling tsleep(). This hack is controlled by a quirk entry and is only enabled for the ADMtek device. Now, I'm sure there are a few of you out there ready to jump on me and suggest some other approach that doesn't involve a busy wait. The only solution that might work is to handle the interrupts in a kernel thread, where you may have something resembling a process context that makes it okay to tsleep(). This is lovely, except we don't have any mechanism like that now, and I'm not about to implement such a thing myself since it's beyond the scope of driver development. (Translation: I'll be damned if I know how to do it.) If FreeBSD ever aquires such a mechanism, I'll be glad to revisit the driver to take advantage of it. In the meantime, I settled for what I perceived to be the solution that involved the least amount of code changes. In general, the hit is pretty light. Also note that my only USB test box has a UHCI controller: I haven't I don't have a machine with an OHCI controller available. Highlights: - Updated usb_quirks.* to add UQ_NO_TSLEEP quirk for ADMtek part. - Updated usbdevs and regenerated generated files - Updated HARDWARE.TXT and RELNOTES.TXT files - Updated sysinstall/device.c and userconfig.c - Updated kernel configs -- device aue0 is commented out by default - Updated /sys/conf/files - Added new kld module directory
1999-12-28 02:01:18 +00:00
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
/* STSN products */
product STSN STSN0001 0x0001 Internet Access Device
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* SUN Corporation products */
product SUNTAC PS64P1 0x0005 SUNTAC U-Cable type P1
product SUNTAC VS10U 0x0009 SUNTAC Slipper U
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Sun Microsystems products */
From NetBSD
2001-04-12 10:59:30 +00:00
product SUN KEYBOARD 0x0005 Type 6 USB keyboard
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* XXX The above is a North American PC style keyboard possibly */
From NetBSD
2001-04-12 10:59:30 +00:00
product SUN MOUSE 0x0100 Type 6 USB mouse
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
New entries (Mike Meyer)
2000-05-25 22:27:55 +00:00
/* Supra products */
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
product DIAMOND2 SUPRAEXPRESS56K 0x07da Supra Express 56K modem
product DIAMOND2 SUPRA2890 0x0b4a SupraMax 2890 56K Modem
product DIAMOND2 RIO600USB 0x5001 Rio 600 USB
* Correct a broken entry * Add the id for the Rio 800 USB. Submitted by: Wesley Morgan <morganw@chemikals.org>
2001-02-05 11:00:13 +00:00
product DIAMOND2 RIO800USB 0x5002 Rio 800 USB
TDK ids Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
2001-04-12 11:04:08 +00:00
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
/* Taugagreining products */
product TAUGA CAMERAMATE 0x0005 CameraMate (DPCM_USB)
TDK ids Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
2001-04-12 11:04:08 +00:00
/* TDK products */
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product TDK UPA9664 0x0115 USB-PDC Adapter UPA9664
product TDK UCA1464 0x0116 USB-cdmaOne Adapter UCA1464
product TDK UHA6400 0x0117 USB-PHS Adapter UHA6400
product TDK UPA6400 0x0118 USB-PHS Adapter UPA6400
TDK ids Submitted by: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
2001-04-12 11:04:08 +00:00
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
/* TEAC products */
product TEAC FD05PUB 0x0000 FD-05PUB floppy
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Telex Communications products */
product TELEX MIC1 0x0001 Enhanced USB Microphone
Add support for the Trek Thumbdrive 8MB USB Drive. PR: 46004 Submitted by: Brian J. McGovern <mcgovern@tick.beta.com> (original version)
2003-01-30 18:33:01 +00:00
product TREK THUMBDRIVE_8MB 0x9988 ThumbDrive_8MB
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Texas Intel products */
product TI UTUSB41 0x1446 UT-USB41 hub
Add a few Ids. From NetBSD.
2001-01-03 11:45:03 +00:00
product TI TUSB2046 0x2046 TUSB2046 hub
Add usbdevs and friends.
1999-11-18 18:02:44 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Thrustmaster products */
product THRUST FUSION_PAD 0xa0a3 Fusion Digital Gamepad
Add the vendor and device IDs for a whole bunch of additional USB ethernet adapters that are supported by the aue and kue drivers. There are actually a couple more out there from Accton, Asante and EXP Computer, however I was not able to find any Windows device drivers for these on their servers, and hence could not harvest their vendor/device ID info. If somebody has one of these things and can look in the .inf file that comes with the Windows driver, I'd appreciate knowing what it says for 'VID' and 'PID.' Additional adapters include: the D-Link DSB-650 and DSB-650TX, the SMC 2102USB, 2104USB and 2202USB, the ATen UC10T, and the Netgear EA101. These are all mentioned in the man pages, relnotes and LINT. Also correct the date in the kue(4) man page. I wrote this thing on Jan, 4 2000, not 1999.
2000-01-07 22:18:49 +00:00
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
/* Trek Technology products */
product TREK THUMBDRIVE 0x1111 ThumbDrive
Add support for the Trek Thumbdrive 8MB USB Drive. PR: 46004 Submitted by: Brian J. McGovern <mcgovern@tick.beta.com> (original version)
2003-01-30 18:33:01 +00:00
product TREK THUMBDRIVE 0x9988 ThumbDrive
Sync with NetBSD. More ids, more!
2000-10-07 11:10:53 +00:00
Add Mustek, National and Ultima scanners. Submitted by: Henning Meier-Geinitz <hmg@gmx.de> PR: 29777 MFC after: 1 week
2001-08-21 21:35:40 +00:00
/* Ultima products */
product ULTIMA 1200UBPLUS 0x4002 1200 UB Plus scanner
New ids Submitted by: Scott Long PR: 18897
2000-08-06 23:26:58 +00:00
/* UMAX products */
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product UMAX ASTRA1236U 0x0002 Astra 1236U Scanner
product UMAX ASTRA1220U 0x0010 Astra 1220U Scanner
product UMAX ASTRA2000U 0x0030 Astra 2000U Scanner
product UMAX ASTRA2100U 0x0130 Astra 2100U Scanner
product UMAX ASTRA2200U 0x0230 Astra 2200U Scanner
Merge from NetBSD. Add lots of new scanner devices: AGFA SNAPSCAN1236U AGFA SNAPSCANE40 AGFA SNAPSCANE50 AGFA SNAPSCANE20 AGFA SNAPSCANE25 AGFA SNAPSCANE26 AGFA SNAPSCANE52 CANON N656U HP 3400CSE SCANLOGIC 336CX MUSTEK BEARPAW1200F MUSTEK 600USB MUSTEK 1200USBPLUS NATIONAL BEARPAW2400 EPSON 640U EPSON 1650 EPSON GT9700F UMAX ASTRA3400 ULTIMA 1200UBPLUS
2002-02-11 03:35:53 +00:00
product UMAX ASTRA3400 0x0060 Astra 3400 Scanner
New ids Submitted by: Scott Long PR: 18897
2000-08-06 23:26:58 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Universal Access products */
product UNIACCESS PANACHE 0x0101 Panache Surf USB ISDN Adapter
/* Vision products */
Lots of new device Ids. From NetBSD.
2000-07-17 09:55:34 +00:00
product VISION VC6452V002 0x0002 CPiA Camera
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
/* Visioneer products */
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product VISIONEER 7600 0x0211 OneTouch 7600
product VISIONEER 5300 0x0221 OneTouch 5300
Enable the HP 2200C and Visioneer Scanport 3000 scanners, and remove some trailing spaces whilst I'm here. Obtained from: NetBSD.
2002-07-31 09:05:52 +00:00
product VISIONEER 3000 0x0224 Scanport 3000
Loads of scanner Ids.
2000-09-05 12:24:05 +00:00
product VISIONEER 6100 0x0231 OneTouch 6100
Sync with NetBSD
2000-10-25 10:13:47 +00:00
product VISIONEER 6200 0x0311 OneTouch 6200
product VISIONEER 8100 0x0321 OneTouch 8100
product VISIONEER 8600 0x0331 OneTouch 8600
Sync with NetBSD usbdevs
2001-04-02 13:02:17 +00:00
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
/* Wacom products */
product WACOM CT0405U 0x0000 CT-0405-U Tablet
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
product WACOM GRAPHIRE 0x0010 Graphire
product WACOM INTUOSA5 0x0021 Intuos A5
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
/* Xirlink products */
product XIRLINK PCCAM 0x8080 IBM PC Camera
Add Y-E Data floppy drive.
2000-03-15 21:53:09 +00:00
/* Y-E Data products */
product YEDATA FLASHBUSTERU 0x0000 Flashbuster-U
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
/* Yamaha products */
product YAMAHA UX256 0x1000 UX256 MIDI I/F
Update with NetBSD version Remove duplicates NOTE: USB_PRODUCT_SANDISK_IMAGEMATE has changed to USB_PRODUCT_SANDISK_SDDR05A
2001-07-05 09:35:46 +00:00
product YAMAHA UX96 0x1008 UX96 MIDI I/F
Add some ids from NetBSD.
2001-02-05 11:02:50 +00:00
Synchronise with NetBSD for order and formatting; no functional changes.
2002-04-06 13:01:39 +00:00
/* Yano products */
product YANO U640MO 0x0101 U640MO-03
Sync with NetBSD: Add a few id's and correct numerous typo's
2000-04-03 00:07:43 +00:00
/* Zoom Telephonics, Inc. products */
More USB ethernet tweaks: - Sync ohci, uhci and usbdi modules with NetBSD in order to obtain the following improvements: o New USBD_NO_TSLEEP flag can be used in place of UQ_NO_TSLEEP quirk. This allows drivers to specify busy waiting only for certain transfers (namely control transfers for reading/writing registers and stuff). o New USBD_FORCE_SHORT_XFER flag can be used to deal with devices like the ADMtek Pegasus that sense the end of bulk OUT transfers in a special way (if a transfer is exactly a multiple of 64 bytes in size, you need to send an extra empty packet to terminate the transfer). o usbd_open_pipe_intr() now accepts an interval argument which can be used to change the rate at which the interrupt callback routine is invoked. Specifying USBD_DEFAULT_INTERVAL uses the value specified in the device's config data, but drivers can override it if needed. - Change if_aue to use USBD_FORCE_SHORT_XFER for packet transmissions. - Change if_aue, if_kue and if_cue to use USBD_NO_TSLEEP for all control transfers. We no longer force the non-tsleep hack for bulk transfers since these are done asynchronously anyway. - Removed quirk entry fiddling from if_aue and if_kue since we don't need it anymore now that we have the USBD_NO_TSLEEP flag. - Tweak ulpt, uhid, ums and ukbd drivers to use the new arg to usbd_open_pipe_intr(). - Add a flag to the softc struct in the ethernet drivers to indicate when a device has been detached, and use this flag to perform tests to prevent the drivers from trying to do control transfers if this is the case. This is necessary because calling if_detach() with INET6 enabled will eventually result in a call to the driver's ioctl() routine to delete the multicast groups on the interface, which will result in attempts to perform control transfers. (It's possible this also happens even without INET6 support enabled.) This is pointless since we know that if the detach method has been called, the hardware has been unplugged. - Changed watchdog timeout routines to just call the driver init routines to initialize the device states without trying to close and re-open the pipes. This is partly because we don't want to frob things at interrupt context, but also because this doesn't seem to work right and I don't want to panic the system just because a USB device may have stopped responding. - Fix aue_rxeof() to be a little smarter about detecting when a double transfer is needed. Unfortunately, the design of the chip makes it hard to get this exactly right. Hopefully, this will go away once either Nick or Lennart finds the bug in the uhci driver that makes this ugly hack necessary. - Also sync usbdevs with NetBSD.
2000-01-20 07:38:33 +00:00
product ZOOM 2986L 0x9700 2986L Fax modem
Zyxel keyboard Id
2000-10-07 11:01:54 +00:00
/* ZyXEL Communication Co. products */
Add the Omni 56K Plus modem Submitted by: kazarov@izmiran.rssi.ru
2001-04-09 18:19:20 +00:00
product ZYXEL OMNI56K 0x1500 Omni 56K Plus
Zyxel keyboard Id
2000-10-07 11:01:54 +00:00
product ZYXEL 980N 0x2011 Scorpion-980N keyboard
Reference in New Issue Copy Permalink