d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-skq/sys/powerpc/conf/MPC85XXSPE

125 lines
2.2 KiB
Plaintext
Raw Normal View History

Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
#
# Custom kernel for Freescale MPC85XX development boards like the CDS etc.
#
# $FreeBSD$
#
cpu BOOKE
cpu BOOKE_E500
Make MPC85XXSPE kernel conf ident match the file name
2018-02-24 17:54:12 +00:00
ident MPC85XXSPE
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
machine powerpc powerpcspe
include "dpaa/config.dpaa"
Stop passing -me500 to the assembler for Book-E kernels We already pass -many to the assembler, and -me500 drops 64-bit instruction handling, for some reason only breaking module building for 64-bit kernels. Additionally, build with CTF for dtrace.
2017-11-04 00:47:21 +00:00
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
makeoptions WITH_CTF=1
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
options FPU_EMU
powerpc: Clamp MAXCPU for MPC85XXSPE kernel to 2 SoCs with e500v2 chips only have at most 2 cores, and there are no plans to release any more e500v2-based SoCs. Clamping MAXCPU down to 2 saves 5MB of data, and 1.5MB bss.
2019-02-10 20:21:20 +00:00
options MAXCPU=2
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
options _KPOSIX_PRIORITY_SCHEDULING
options ALT_BREAK_TO_DEBUGGER
options BREAK_TO_DEBUGGER
options BOOTP
options BOOTP_NFSROOT
#options BOOTP_NFSV3
options CD9660
options COMPAT_43
options DDB
#options DEADLKRES
options DEVICE_POLLING
#options DIAGNOSTIC
options FDT
#makeoptions FDT_DTS_FILE=mpc8555cds.dts
options FFS
options GDB
options GEOM_PART_GPT
options INET
options INET6
options TCP_HHOOK # hhook(9) framework for TCP
options INVARIANTS
options INVARIANT_SUPPORT
options KDB
options KTRACE
options MD_ROOT
options MPC85XX
options MSDOSFS
options NFS_ROOT
options NFSCL
options NFSLOCKD
powerpc conf: Add PRINTF_BUFR_SIZE option to Book-E configs Without this, printf is very hard to follow at times on multicore systems.
2018-08-19 19:07:59 +00:00
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
options PROCFS
options PSEUDOFS
options SCHED_ULE
options CAPABILITIES
options CAPABILITY_MODE
options SMP
options SYSVMSG
options SYSVSEM
options SYSVSHM
options WITNESS
options WITNESS_SKIPSPIN
Add a bunch of new default options to MPC85XX* configs These were tested at various points but never merged into the configs at the time.
2016-10-24 04:21:06 +00:00
options COMPAT_FREEBSD10
Add a COMPAT_FREEBSD11 kernel option. Use it wherever COMPAT_FREEBSD10 is currently specified. Reviewed by: glebius, imp, jhb Differential Revision: https://reviews.freebsd.org/D8736
2016-12-09 18:54:12 +00:00
options COMPAT_FREEBSD11
Add a COMPAT_FREEBSD12 kernel option. Use it wherever COMPAT_FREEBSD11 is currently specified, like r309749. Reviewed by: imp, jhb, markj Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D20120
2019-05-02 18:10:23 +00:00
options COMPAT_FREEBSD12
Add a bunch of new default options to MPC85XX* configs These were tested at various points but never merged into the configs at the time.
2016-10-24 04:21:06 +00:00
options HWPMC_HOOKS
options KDTRACE_HOOKS # Kernel DTrace hooks
options DDB_CTF # Kernel ELF linker loads CTF data
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device ata
device bpf
device cfi
Add some more devices to the MPC85XX-based configs These devices bring the configs closer to a desktop-like (GENERIC) kernel config. * The Freescale DIU support was added to the config in r306358. Without keyboard support video support is nearly pointless, so add ukbd and ums. * The AmigaOne X5000, and P1022 devboard, both use a variant of the ds1307 RTC * cpufreq scaling is currently supported by the p1022. More SoCs will be added eventually.
2017-10-19 03:38:53 +00:00
device cpufreq
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device crypto
device cryptodev
device da
Add some more devices to the MPC85XX-based configs These devices bring the configs closer to a desktop-like (GENERIC) kernel config. * The Freescale DIU support was added to the config in r306358. Without keyboard support video support is nearly pointless, so add ukbd and ums. * The AmigaOne X5000, and P1022 devboard, both use a variant of the ds1307 RTC * cpufreq scaling is currently supported by the p1022. More SoCs will be added eventually.
2017-10-19 03:38:53 +00:00
device ds1307
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device ds1553
Make iflib a loadable module. iflib is already a module, but it is unconditionally compiled into the kernel. There are drivers which do not need iflib(4), and there are situations where somebody might not want iflib in kernel because of using the corresponding driver as module. Reviewed by: marius Discussed with: erj Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential revision: https://reviews.freebsd.org/D19041
2019-01-31 19:05:56 +00:00
device iflib
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device em
device alc
device ether
device fxp
device gpio
Add a GPIO poweroff and reset driver. Summary: This implements part of the gpio-poweroff and gpio-restart device tree bindings. Optional properties are not handled currently. It also currently only supports level-triggered reset. Reviewed By: gonzo Differential Revision: https://reviews.freebsd.org/D8521
2016-11-16 02:14:07 +00:00
device gpiopower
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device iic
device iicbus
#device isa
device loop
device md
device miibus
Add sdhci and mmc drivers to MPC85XX/MPC85XXSPE sdhci was missing from MPC85XXSPE, and mmc/mmcsd were missing from both.
2016-11-15 05:05:51 +00:00
device mmc
device mmcsd
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device pass
device pci
device quicc
#device rl
device scbus
device scc
Add sdhci and mmc drivers to MPC85XX/MPC85XXSPE sdhci was missing from MPC85XXSPE, and mmc/mmcsd were missing from both.
2016-11-15 05:05:51 +00:00
device sdhci
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device sec
Add Freescale eSPI driver found on QorIQ SoCs
2017-04-02 01:21:35 +00:00
device spibus
device spigen
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device tsec
Add a bunch of new default options to MPC85XX* configs These were tested at various points but never merged into the configs at the time.
2016-10-24 04:21:06 +00:00
device dpaa
tun/tap: merge and rename to `tuntap` tun(4) and tap(4) share the same general management interface and have a lot in common. Bugs exist in tap(4) that have been fixed in tun(4), and vice-versa. Let's reduce the maintenance requirements by merging them together and using flags to differentiate between the three interface types (tun, tap, vmnet). This fixes a couple of tap(4)/vmnet(4) issues right out of the gate: - tap devices may no longer be destroyed while they're open [0] - VIMAGE issues already addressed in tun by kp [0] emaste had removed an easy-panic-button in r240938 due to devdrn blocking. A naive glance over this leads me to believe that this isn't quite complete -- destroy_devl will only block while executing d_* functions, but doesn't block the device from being destroyed while a process has it open. The latter is the intent of the condvar in tun, so this is "fixed" (for certain definitions of the word -- it wasn't really broken in tap, it just wasn't quite ideal). ifconfig(8) also grew the ability to map an interface name to a kld, so that `ifconfig {tun,tap}0` can continue to autoload the correct module, and `ifconfig vmnet0 create` will now autoload the correct module. This is a low overhead addition. (MFC commentary) This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this, and how critical they are. Changes after this are likely easily MFC'd without taking this merge, but the merge will be easier. I have no plans to do this MFC as of now. Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill) Input also from: melifaro Relnotes: yes Differential Revision: https://reviews.freebsd.org/D20044
2019-05-08 02:32:11 +00:00
device tuntap
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device uart
options USB_DEBUG # enable debug msgs
#device uhci
device ehci
Add some more devices to the MPC85XX-based configs These devices bring the configs closer to a desktop-like (GENERIC) kernel config. * The Freescale DIU support was added to the config in r306358. Without keyboard support video support is nearly pointless, so add ukbd and ums. * The AmigaOne X5000, and P1022 devboard, both use a variant of the ds1307 RTC * cpufreq scaling is currently supported by the p1022. More SoCs will be added eventually.
2017-10-19 03:38:53 +00:00
device ukbd
device ums
Create a new MACHINE_ARCH for Freescale PowerPC e500v2 Summary: The Freescale e500v2 PowerPC core does not use a standard FPU. Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this. Additionaly, the SPE opcodes overlap with Altivec, so these are mutually exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was created with the same function set as in powerpc/powerpc/altivec.c, so it becomes effectively a drop-in replacement. setjmp/longjmp were modified to save the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by the SPE). Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not support double-precision floating point. Also, without a new MACHINE_ARCH it would be impossible to provide binary packages which utilize the SPE. Additionally, no work has been done to support ports, work is needed for this. This also means no newer gcc can yet be used. However, gcc's powerpc support has been refactored which would make adding a powerpcspe-freebsd target very easy. Test Plan: This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222 (P1022-based) board, compiled against the new ABI. Base system utilities (/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot multiuser. Reviewed By: bdrewery, imp Relnotes: yes Differential Revision: https://reviews.freebsd.org/D5683
2016-10-22 01:57:15 +00:00
device umass
device usb
device vlan
# P1022 DIU
device diu
device videomode
Add a bunch of new default options to MPC85XX* configs These were tested at various points but never merged into the configs at the time.
2016-10-24 04:21:06 +00:00
device vt
device fbd
Factor-out hardware-independent part of USB HID support to new module It will be used by the upcoming HID-over-i2C implementation. Should be no-op, except hid.ko module dependency is to be added to affected drivers. Reviewed by: hselasky, manu Differential revision: https://reviews.freebsd.org/D27867
2020-10-05 01:21:08 +03:00
# HID support
hid: Import functions and constants required by new subsystem This does an import of quirk stubs, debugging macros from USB code and numerous usage constants used by dependent drivers. Besides, this change renames some functions to get a better matching with userland library and NetBSD/OpenBSD HID code. Namely: - Old hid_report_size() renamed to hid_report_size_max() - New hid_report_size() calculates size of given report rather than maximum size of all reports. - hid_get_data_unsigned() renamed to hid_get_udata() - hid_put_data_unsigned() renamed to hid_put_udata() Compat shim functions are provided in usbhid.h to make possible compile of legacy code unmodified after this change. Reviewed by: manu, hselasky Differential revision: https://reviews.freebsd.org/D27887
2020-10-05 12:38:11 +03:00
options HID_DEBUG # enable debug msgs
Factor-out hardware-independent part of USB HID support to new module It will be used by the upcoming HID-over-i2C implementation. Should be no-op, except hid.ko module dependency is to be added to affected drivers. Reviewed by: hselasky, manu Differential revision: https://reviews.freebsd.org/D27867
2020-10-05 01:21:08 +03:00
device hid # Generic HID support
Reference in New Issue Copy Permalink