d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dd31125d72
freebsd-skq/sys/pci/pci.c

956 lines
24 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
* $Id: pci.c,v 1.89 1998/09/16 08:28:11 dfr Exp $
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completed function declarations and/or added prototypes and/or added #includes to get prototypes. pci now uses a different interrupt handler type for interrupts that it dispatches and the isa interrupt handler type for the interrupts that it handles.
1995-12-16 00:27:59 +00:00
#include "pci.h"
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
#if NPCI > 0
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
#include "opt_devfs.h"
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
#include "opt_simos.h"
Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style. This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Added a bit of missing functionality to make this work correctly on a wider variety of systems. Include the deivers from pci_intel.c in pci_config.c (I hope this is what was intended; my system works ok). Use pmap_mapdev(). Automatically map any large linear frame buffers or whatnot in VGA-style devices which ordinarily would not have their own drivers, and don't call not_supported() for them. (This shuts up complaints about my Matrox card.) Include the beginnings of what could eventually become dynamically-loadable PCI devices. Allow for the possibility of PCI devices simply providing a PCI veneer over an existing ISA device, and shut up about them, too. Make autoconfiguration text conform more to the style of other supported buses.
1994-09-14 01:34:51 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> Bug fixed, that caused system hang on first interrupt on some motherboards. New version of PCI bus configuration code, now supports dynamic interrupt configuration (using BIOS supplied values). NCR SCSI and DEC Ethernet driver patched to use this feature. *** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
#include <sys/malloc.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <sys/fcntl.h>
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
#include <sys/conf.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <sys/kernel.h>
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/buf.h>
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
#ifdef DEVFS
#include <sys/devfsext.h>
#endif /* DEVFS */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
#include <vm/vm.h>
Untangled the vm.h include file spaghetti.
1995-12-07 12:48:31 +00:00
#include <vm/pmap.h>
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
#include <vm/vm_extern.h>
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
#include <pci/pcireg.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <pci/pcivar.h>
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
#include <pci/pci_ioctl.h>
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Modified to use renamed get_pci_apic_irq() -> pci_apic_pin() function.
1997-06-25 20:56:29 +00:00
#ifdef APIC_IO
#include <machine/smp.h>
#endif /* APIC_IO */
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
STAILQ_HEAD(devlist, pci_devinfo) pci_devq;
u_int32_t pci_numdevs = 0;
u_int32_t pci_generation = 0;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return highest PCI bus number known to be used, or -1 if none */
Added a new field to the pci_device struct called pd_shutdown to specify a device specific shutdown routine for devconf. Assign the value of this to the kern_devconf struct. Implement a device shutdown routine for if_de that disables the device. This will stop the device from corrupting memory after a reboot.
1995-03-17 04:27:21 +00:00
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_bushigh(void)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (pci_cfgopen() == 0)
return (-1);
return (0);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> Bug fixed, that caused system hang on first interrupt on some motherboards. New version of PCI bus configuration code, now supports dynamic interrupt configuration (using BIOS supplied values). NCR SCSI and DEC Ethernet driver patched to use this feature. *** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return base address of memory or port map */
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> Bug fixed, that caused system hang on first interrupt on some motherboards. New version of PCI bus configuration code, now supports dynamic interrupt configuration (using BIOS supplied values). NCR SCSI and DEC Ethernet driver patched to use this feature. *** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static int
pci_mapbase(unsigned mapreg)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int mask = 0x03;
if ((mapreg & 0x01) == 0)
mask = 0x0f;
return (mapreg & ~mask);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return map type of memory or port map */
Update PCI bus code from my current sources: - always use pci_conf_read() and pci_conf_write(). (This is required to simulate non-existant devices in my system for PCI bridge code tests.) - reorder some functions (put the main functions at the end). - correct off by one bug in the code dealing with unitialized PCI to PCI bridge chips. (Bug found by ASAMI Satoshi.) - print function number for multi-function devices.
1996-04-14 20:14:36 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_maptype(unsigned mapreg)
{
static u_int8_t maptype[0x10] = {
PCI_MAPMEM, PCI_MAPPORT,
PCI_MAPMEM, 0,
PCI_MAPMEM, PCI_MAPPORT,
0, 0,
PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT,
PCI_MAPMEM|PCI_MAPMEMP, 0,
PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT,
0, 0,
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
};
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return maptype[mapreg & 0x0f];
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return log2 of map size decoded for memory or port map */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
static int
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_mapsize(unsigned testval)
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int ln2size;
Add heuristic to detect multi-function devices that don't announce this feature in the header type register, though it is required by the PCI spec. This should correctly probe both functions of the Intel 82371FB chip, without the need for a special case based on the device ID.
1996-01-30 01:14:29 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
testval = pci_mapbase(testval);
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
ln2size = 0;
if (testval != 0) {
while ((testval & 1) == 0)
{
ln2size++;
testval >>= 1;
}
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (ln2size);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return log2 of address range supported by map register */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static int
pci_maprange(unsigned mapreg)
{
int ln2range = 0;
switch (mapreg & 0x07) {
case 0x00:
case 0x01:
case 0x05:
ln2range = 32;
break;
case 0x02:
ln2range = 20;
break;
case 0x04:
ln2range = 64;
break;
Update PCI bus code from my current sources: - always use pci_conf_read() and pci_conf_write(). (This is required to simulate non-existant devices in my system for PCI bridge code tests.) - reorder some functions (put the main functions at the end). - correct off by one bug in the code dealing with unitialized PCI to PCI bridge chips. (Bug found by ASAMI Satoshi.) - print function number for multi-function devices.
1996-04-14 20:14:36 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (ln2range);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* extract map parameters into newly allocated array of pcimap structures */
static pcimap *
pci_readmaps(pcicfgregs *cfg, int maxmaps)
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
{
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
int i, j = 0;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcimap *map;
int map64 = 0;
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
int reg = PCIR_MAPS;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
for (i = 0; i < maxmaps; i++) {
int reg = PCIR_MAPS + i*4;
u_int32_t base;
u_int32_t ln2range;
base = pci_cfgread(cfg, reg, 4);
ln2range = pci_maprange(base);
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
if (base == 0 || ln2range == 0 || base == 0xffffffff)
continue; /* skip invalid entry */
else {
j++;
if (ln2range > 32) {
i++;
j++;
}
}
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
map = malloc(j * sizeof (pcimap), M_DEVBUF, M_WAITOK);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (map != NULL) {
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
bzero(map, sizeof(pcimap) * j);
cfg->nummaps = j;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
for (i = 0, j = 0; i < maxmaps; i++, reg += 4) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
u_int32_t base;
u_int32_t testval;
base = pci_cfgread(cfg, reg, 4);
if (map64 == 0) {
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
if (base == 0 || base == 0xffffffff)
continue; /* skip invalid entry */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_cfgwrite(cfg, reg, 0xffffffff, 4);
testval = pci_cfgread(cfg, reg, 4);
pci_cfgwrite(cfg, reg, base, 4);
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
map[j].base = pci_mapbase(base);
map[j].type = pci_maptype(base);
map[j].ln2size = pci_mapsize(testval);
map[j].ln2range = pci_maprange(testval);
map64 = map[j].ln2range == 64;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
} else {
/* only fill in base, other fields are 0 */
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
map[j].base = base;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
map64 = 0;
}
In the cyrix Cx5530, there are null (empty) Base address registers before the base register that controls Ultra-DMA, so we need to examine all possible base registers instead of just giving up at the first empty one. Also, looking at the source code to the BIOS, I see that they are also checking for 0xffffffff as an invalid value so do the same. Stefan may like to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
j++;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (map);
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* adjust some values from PCI 1.0 devices to match 2.0 standards ... */
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static void
pci_fixancient(pcicfgregs *cfg)
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (cfg->hdrtype != 0)
return;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* PCI to PCI bridges use header type 1 */
Use "baseclass" instead of "class" for storing the contents of PCI register 0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
if (cfg->baseclass == PCIC_BRIDGE && cfg->subclass == PCIS_BRIDGE_PCI)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->hdrtype = 1;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* read config data specific to header type 1 device (PCI to PCI bridge) */
static void *
pci_readppb(pcicfgregs *cfg)
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcih1cfgregs *p;
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p = malloc(sizeof (pcih1cfgregs), M_DEVBUF, M_WAITOK);
if (p == NULL)
return (NULL);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
bzero(p, sizeof *p);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->secstat = pci_cfgread(cfg, PCIR_SECSTAT_1, 2);
p->bridgectl = pci_cfgread(cfg, PCIR_BRIDGECTL_1, 2);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->seclat = pci_cfgread(cfg, PCIR_SECLAT_1, 1);
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->iobase = PCI_PPBIOBASE (pci_cfgread(cfg, PCIR_IOBASEH_1, 2),
pci_cfgread(cfg, PCIR_IOBASEL_1, 1));
p->iolimit = PCI_PPBIOLIMIT (pci_cfgread(cfg, PCIR_IOLIMITH_1, 2),
pci_cfgread(cfg, PCIR_IOLIMITL_1, 1));
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->membase = PCI_PPBMEMBASE (0,
pci_cfgread(cfg, PCIR_MEMBASE_1, 2));
p->memlimit = PCI_PPBMEMLIMIT (0,
pci_cfgread(cfg, PCIR_MEMLIMIT_1, 2));
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->pmembase = PCI_PPBMEMBASE (
(pci_addr_t)pci_cfgread(cfg, PCIR_PMBASEH_1, 4),
pci_cfgread(cfg, PCIR_PMBASEL_1, 2));
Reapplied all of Stefan's changes. What a mess - the files were modified and moved at the same time. This made it *very* difficult to fix the revision log lossage that happend when the files were moved. SIGH.
1995-02-02 13:12:18 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->pmemlimit = PCI_PPBMEMLIMIT (
(pci_addr_t)pci_cfgread(cfg, PCIR_PMLIMITH_1, 4),
pci_cfgread(cfg, PCIR_PMLIMITL_1, 2));
return (p);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* read config data specific to header type 2 device (PCI to CardBus bridge) */
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static void *
pci_readpcb(pcicfgregs *cfg)
{
pcih2cfgregs *p;
New PCI attach code: PCI BIOS mappings are retained, except if option PCI_REMAP is specified in the kernel config file. There is now a list of attach addresses, and the first address that seems to make some device registers appear is chosen. Reviewed by: se Submitted by: wolf
1995-02-22 14:17:15 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p = malloc(sizeof (pcih2cfgregs), M_DEVBUF, M_WAITOK);
if (p == NULL)
return (NULL);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + <se> Improved bus probing, symbolic names for registers.. Chip set parameters get dumped for intel PCI chip sets (82424+82434 only, for now).
1994-09-16 00:33:29 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
bzero(p, sizeof *p);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->secstat = pci_cfgread(cfg, PCIR_SECSTAT_2, 2);
p->bridgectl = pci_cfgread(cfg, PCIR_BRIDGECTL_2, 2);
p->seclat = pci_cfgread(cfg, PCIR_SECLAT_2, 1);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->membase0 = pci_cfgread(cfg, PCIR_MEMBASE0_2, 4);
p->memlimit0 = pci_cfgread(cfg, PCIR_MEMLIMIT0_2, 4);
p->membase1 = pci_cfgread(cfg, PCIR_MEMBASE1_2, 4);
p->memlimit1 = pci_cfgread(cfg, PCIR_MEMLIMIT1_2, 4);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->iobase0 = pci_cfgread(cfg, PCIR_IOBASE0_2, 4);
p->iolimit0 = pci_cfgread(cfg, PCIR_IOLIMIT0_2, 4);
p->iobase1 = pci_cfgread(cfg, PCIR_IOBASE1_2, 4);
p->iolimit1 = pci_cfgread(cfg, PCIR_IOLIMIT1_2, 4);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + <se> Improved bus probing, symbolic names for registers.. Chip set parameters get dumped for intel PCI chip sets (82424+82434 only, for now).
1994-09-16 00:33:29 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
p->pccardif = pci_cfgread(cfg, PCIR_PCCARDIF_2, 4);
return p;
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
}
First try to add support for PCI-PCI bridge chips (written for the DEC 21050 chip in particular, don't have specs of other such chips). This should add support for Multiple-Ethernet PCI cards (e.g. Znyx 314). Reviewed by: se Submitted by: <wolf@kintaro.cologne.de> Wolfgang Stanglmeier
1995-02-27 17:17:14 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* extract header type specific config data */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
static void
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_hdrtypedata(pcicfgregs *cfg)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
switch (cfg->hdrtype) {
case 0:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_0, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_0, 2);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_0);
break;
case 1:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_1, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_1, 2);
cfg->secondarybus = pci_cfgread(cfg, PCIR_SECBUS_1, 1);
cfg->subordinatebus = pci_cfgread(cfg, PCIR_SUBBUS_1, 1);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_1);
cfg->hdrspec = pci_readppb(cfg);
break;
case 2:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_2, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_2, 2);
cfg->secondarybus = pci_cfgread(cfg, PCIR_SECBUS_2, 1);
cfg->subordinatebus = pci_cfgread(cfg, PCIR_SUBBUS_2, 1);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_2);
cfg->hdrspec = pci_readpcb(cfg);
break;
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* read configuration header into pcicfgrect structure */
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
static struct pci_devinfo *
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pci_readcfg(pcicfgregs *probe)
{
pcicfgregs *cfg = NULL;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
struct pci_devinfo *devlist_entry;
struct devlist *devlist_head;
devlist_head = &pci_devq;
devlist_entry = NULL;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (pci_cfgread(probe, PCIR_DEVVENDOR, 4) != -1) {
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
devlist_entry = malloc(sizeof(struct pci_devinfo),
M_DEVBUF, M_WAITOK);
if (devlist_entry == NULL)
return (NULL);
cfg = &devlist_entry->cfg;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
bzero(cfg, sizeof *cfg);
cfg->bus = probe->bus;
cfg->slot = probe->slot;
cfg->func = probe->func;
cfg->vendor = pci_cfgread(cfg, PCIR_VENDOR, 2);
cfg->device = pci_cfgread(cfg, PCIR_DEVICE, 2);
cfg->cmdreg = pci_cfgread(cfg, PCIR_COMMAND, 2);
cfg->statreg = pci_cfgread(cfg, PCIR_STATUS, 2);
Use "baseclass" instead of "class" for storing the contents of PCI register 0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
cfg->baseclass = pci_cfgread(cfg, PCIR_CLASS, 1);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->subclass = pci_cfgread(cfg, PCIR_SUBCLASS, 1);
cfg->progif = pci_cfgread(cfg, PCIR_PROGIF, 1);
cfg->revid = pci_cfgread(cfg, PCIR_REVID, 1);
cfg->hdrtype = pci_cfgread(cfg, PCIR_HEADERTYPE, 1);
cfg->cachelnsz = pci_cfgread(cfg, PCIR_CACHELNSZ, 1);
cfg->lattimer = pci_cfgread(cfg, PCIR_LATTIMER, 1);
cfg->intpin = pci_cfgread(cfg, PCIR_INTPIN, 1);
cfg->intline = pci_cfgread(cfg, PCIR_INTLINE, 1);
Add a call to a platform-specific irq remapping function for alpha platforms which don't record the correct irqs in PCI config space. Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-07-22 08:40:46 +00:00
#ifdef __alpha__
alpha_platform_assign_pciintr(cfg);
#endif
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
#ifdef APIC_IO
Minor cleanup of APIC_IO code. Submitted by: Stefan Esser <se@freebsd.org>
1997-05-27 19:24:36 +00:00
if (cfg->intpin != 0) {
int airq;
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
airq = pci_apic_irq(cfg->bus, cfg->slot, cfg->intpin);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
if (airq >= 0) {
/* PCI specific entry found in MP table */
if (airq != cfg->intline) {
undirect_pci_irq(cfg->intline);
cfg->intline = airq;
}
} else {
/*
* PCI interrupts might be redirected to the
* ISA bus according to some MP tables. Use the
* same methods as used by the ISA devices
* devices to find the proper IOAPIC int pin.
*/
Maintain a mapping from irq number to (ioapic number, int pin) tuple, and use this when masking/unmasking interrupts. Maintain a mapping from (iopaic number, int pin) tuple to irq number, and use this when configuring devices and programming the ioapics. Previous code assumed that irq number was equal to int pin number, and that the ioapic number was 0. Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
airq = isa_apic_irq(cfg->intline);
Add two workarounds for broken MP tables: - Attempt to handle PCI devices where the interrupt is an ISA/EISA interrupt according to the mp table. - Attempt to handle multiple IO APIC pins connected to the same PCI or ISA/EISA interrupt source. Print a warning if this happens, since performance is suboptimal. This workaround is only used for PCI devices. With these two workarounds, the -SMP kernel is capable of running on my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
if ((airq >= 0) && (airq != cfg->intline)) {
/* XXX: undirect_pci_irq() ? */
undirect_isa_irq(cfg->intline);
cfg->intline = airq;
}
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
}
}
Modified to use renamed get_pci_apic_irq() -> pci_apic_pin() function.
1997-06-25 20:56:29 +00:00
#endif /* APIC_IO */
Add support for APIC_IO to pci IRQ configuration. The support for APIC_IO was lost in the new set of pci modules. This patch restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->mingnt = pci_cfgread(cfg, PCIR_MINGNT, 1);
cfg->maxlat = pci_cfgread(cfg, PCIR_MAXLAT, 1);
cfg->mfdev = (cfg->hdrtype & PCIM_MFDEV) != 0;
cfg->hdrtype &= ~PCIM_MFDEV;
pci_fixancient(cfg);
pci_hdrtypedata(cfg);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
STAILQ_INSERT_TAIL(devlist_head, devlist_entry, pci_links);
devlist_entry->conf.pc_sel.pc_bus = cfg->bus;
devlist_entry->conf.pc_sel.pc_dev = cfg->slot;
devlist_entry->conf.pc_sel.pc_func = cfg->func;
devlist_entry->conf.pc_hdr = cfg->hdrtype;
devlist_entry->conf.pc_subvendor = cfg->subvendor;
devlist_entry->conf.pc_subdevice = cfg->subdevice;
devlist_entry->conf.pc_vendor = cfg->vendor;
devlist_entry->conf.pc_device = cfg->device;
devlist_entry->conf.pc_class = cfg->baseclass;
devlist_entry->conf.pc_subclass = cfg->subclass;
devlist_entry->conf.pc_progif = cfg->progif;
devlist_entry->conf.pc_revid = cfg->revid;
pci_numdevs++;
pci_generation++;
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
return (devlist_entry);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Remove a bunch of variables which were unused both in GENERIC and LINT. Found by: -Wunused
1997-11-07 08:53:44 +00:00
#if 0
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* free pcicfgregs structure and all depending data structures */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static int
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
pci_freecfg(struct pci_devinfo *dinfo)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
struct devlist *devlist_head;
devlist_head = &pci_devq;
if (dinfo->cfg.hdrspec != NULL)
free(dinfo->cfg.hdrspec, M_DEVBUF);
if (dinfo->cfg.map != NULL)
free(dinfo->cfg.map, M_DEVBUF);
/* XXX this hasn't been tested */
STAILQ_REMOVE(devlist_head, dinfo, pci_devinfo, pci_links);
free(dinfo, M_DEVBUF);
/* increment the generation count */
pci_generation++;
/* we're losing one device */
pci_numdevs--;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (0);
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Remove a bunch of variables which were unused both in GENERIC and LINT. Found by: -Wunused
1997-11-07 08:53:44 +00:00
#endif
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static void
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
pci_addcfg(struct pci_devinfo *dinfo)
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + <se> Improved bus probing, symbolic names for registers.. Chip set parameters get dumped for intel PCI chip sets (82424+82434 only, for now).
1994-09-16 00:33:29 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (bootverbose) {
int i;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
pcicfgregs *cfg = &dinfo->cfg;
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
printf("found->\tvendor=0x%04x, dev=0x%04x, revid=0x%02x\n",
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->vendor, cfg->device, cfg->revid);
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
printf("\tclass=%02x-%02x-%02x, hdrtype=0x%02x, mfdev=%d\n",
Use "baseclass" instead of "class" for storing the contents of PCI register 0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
cfg->baseclass, cfg->subclass, cfg->progif,
cfg->hdrtype, cfg->mfdev);
Some workarounds for a common DEC pci-pci bridge found on alphas. Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
printf("\tsubordinatebus=%x \tsecondarybus=%x\n",
cfg->subordinatebus, cfg->secondarybus);
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
#ifdef PCI_DEBUG
printf("\tcmdreg=0x%04x, statreg=0x%04x, cachelnsz=%d (dwords)\n",
cfg->cmdreg, cfg->statreg, cfg->cachelnsz);
printf("\tlattimer=0x%02x (%d ns), mingnt=0x%02x (%d ns), maxlat=0x%02x (%d ns)\n",
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
cfg->lattimer, cfg->lattimer * 30,
cfg->mingnt, cfg->mingnt * 250, cfg->maxlat, cfg->maxlat * 250);
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
#endif /* PCI_DEBUG */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (cfg->intpin > 0)
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
printf("\tintpin=%c, irq=%d\n", cfg->intpin +'a' -1, cfg->intline);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
for (i = 0; i < cfg->nummaps; i++) {
pcimap *m = &cfg->map[i];
Two minor changes to the code that builds the pci map array: 1) Stop at the first map register that contains a zero value. 2) When testing for the map size work up from low values, since this works around a bug in some BusLogic SCSI card, which has the 16 upper port base address bits hardwired to zero. The config register dump printed in the bootverbose case has been slightly rearranged.
1997-05-28 10:01:03 +00:00
printf("\tmap[%d]: type %x, range %2d, base %08x, size %2d\n",
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
i, m->type, m->ln2range, m->base, m->ln2size);
}
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
pci_drvattach(dinfo); /* XXX currently defined in pci_compat.c */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* return pointer to device that is a bridge to this bus */
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static pcicfgregs *
pci_bridgeto(int bus)
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
{
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (NULL); /* XXX not yet implemented */
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> Bug fixed, that caused system hang on first interrupt on some motherboards. New version of PCI bus configuration code, now supports dynamic interrupt configuration (using BIOS supplied values). NCR SCSI and DEC Ethernet driver patched to use this feature. *** Remove PCI IRQ specifications from your kernel config file ! ***
1994-10-12 02:33:23 +00:00
}
Completely new PCI code: 1) Supports PCI to PCI bridge devices (and tries to initialise them, even if the BIOS is brain dead). 2) Supports shared PCI interrupts. Interrupt handlers now MUST return '0' if they found nothing to do, '1' otherwise. New features tested with i486 systems based on the Intel Saturn and a DEC 4channel Ethernet card only, but expected to work on most systems. The option PCI_REMAP has been removed ! Submitted by: Wolfgang Stanglmeier <wolf@kintaro.cologne.de>
1995-03-21 23:01:06 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* scan one PCI bus for devices */
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
static int
pci_probebus(int bus)
{
pcicfgregs probe;
int bushigh = bus;
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
#ifdef SIMOS
#undef PCI_SLOTMAX
#define PCI_SLOTMAX 0
#endif
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
bzero(&probe, sizeof probe);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
/* XXX KDM */
/* probe.parent = pci_bridgeto(bus); */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
probe.bus = bus;
for (probe.slot = 0; probe.slot <= PCI_SLOTMAX; probe.slot++) {
int pcifunchigh = 0;
for (probe.func = 0; probe.func <= pcifunchigh; probe.func++) {
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
struct pci_devinfo *dinfo = pci_readcfg(&probe);
if (dinfo != NULL) {
if (dinfo->cfg.mfdev)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcifunchigh = 7;
Move call of pci_addcfg() before test of cfg->subordinatebus, since the device probe of a host to PCI bridge may modify that value, based on its knowledge of device specific registers. This makes the Intel XXpress work, as verified by: Terje Marthinussen <terjem@cc.uit.no>.
1997-06-02 19:59:01 +00:00
/*
* XXX: Temporarily move pci_addcfg() up before
* the use of cfg->subordinatebus. This is
* necessary, since pci_addcfg() calls the
* device's probe(), which may read the bus#
* from some device dependent register of
* some host to PCI bridges. The probe will
* eventually be moved to pci_readcfg(), and
* pci_addcfg() will then be moved back down
* below the conditional statement ...
*/
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
pci_addcfg(dinfo);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
if (bushigh < dinfo->cfg.subordinatebus)
bushigh = dinfo->cfg.subordinatebus;
Some workarounds for a common DEC pci-pci bridge found on alphas. Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
if (bushigh < dinfo->cfg.secondarybus)
bushigh = dinfo->cfg.secondarybus;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
/* XXX KDM */
/* cfg = NULL; we don't own this anymore ... */
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
Make mapping messages depend on bootverbose flag. Add PCI subclass to unknown device message.
1995-09-07 15:20:53 +00:00
}
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (bushigh);
}
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/* scan a PCI bus tree reached through one PCI attachment point */
Add generic PCI to PCI bridge support. Improve verbose boot messages for unidentified chips.
1996-02-17 23:57:04 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int
pci_probe(pciattach *parent)
{
int bushigh;
int bus = 0;
Add generic PCI to PCI bridge support. Improve verbose boot messages for unidentified chips.
1996-02-17 23:57:04 +00:00
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
STAILQ_INIT(&pci_devq);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
bushigh = pci_bushigh();
while (bus <= bushigh) {
int newbushigh;
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
printf("Probing for devices on PCI bus %d:\n", bus);
newbushigh = pci_probebus(bus);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (bushigh < newbushigh)
bushigh = newbushigh;
bus++;
Added a bit of missing functionality to make this work correctly on a wider variety of systems. Include the deivers from pci_intel.c in pci_config.c (I hope this is what was intended; my system works ok). Use pmap_mapdev(). Automatically map any large linear frame buffers or whatnot in VGA-style devices which ordinarily would not have their own drivers, and don't call not_supported() for them. (This shuts up complaints about my Matrox card.) Include the beginnings of what could eventually become dynamically-loadable PCI devices. Allow for the possibility of PCI devices simply providing a PCI veneer over an existing ISA device, and shut up about them, too. Make autoconfiguration text conform more to the style of other supported buses.
1994-09-14 01:34:51 +00:00
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
return (bushigh);
Submitted by: Wolfgang Stanglmeier <wolf@dentaro.GUN.de> + Stefan Esser <se> Directory for PCI autoconfigure and device driver code.
1994-09-01 01:45:19 +00:00
}
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
/*
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
* This is the user interface to PCI configuration space.
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
*/
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
static int
pci_open(dev_t dev, int oflags, int devtype, struct proc *p)
{
if ((oflags & FWRITE) && securelevel > 0) {
return EPERM;
}
return 0;
}
static int
pci_close(dev_t dev, int flag, int devtype, struct proc *p)
{
return 0;
}
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
/*
* Match a single pci_conf structure against an array of pci_match_conf
* structures. The first argument, 'matches', is an array of num_matches
* pci_match_conf structures. match_buf is a pointer to the pci_conf
* structure that will be compared to every entry in the matches array.
* This function returns 1 on failure, 0 on success.
*/
static int
pci_conf_match(struct pci_match_conf *matches, int num_matches,
struct pci_conf *match_buf)
{
int i;
if ((matches == NULL) || (match_buf == NULL) || (num_matches <= 0))
return(1);
for (i = 0; i < num_matches; i++) {
/*
* I'm not sure why someone would do this...but...
*/
if (matches[i].flags == PCI_GETCONF_NO_MATCH)
continue;
/*
* Look at each of the match flags. If it's set, do the
* comparison. If the comparison fails, we don't have a
* match, go on to the next item if there is one.
*/
if (((matches[i].flags & PCI_GETCONF_MATCH_BUS) != 0)
&& (match_buf->pc_sel.pc_bus != matches[i].pc_sel.pc_bus))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_DEV) != 0)
&& (match_buf->pc_sel.pc_dev != matches[i].pc_sel.pc_dev))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_FUNC) != 0)
&& (match_buf->pc_sel.pc_func != matches[i].pc_sel.pc_func))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_VENDOR) != 0)
&& (match_buf->pc_vendor != matches[i].pc_vendor))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_DEVICE) != 0)
&& (match_buf->pc_device != matches[i].pc_device))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_CLASS) != 0)
&& (match_buf->pc_class != matches[i].pc_class))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_UNIT) != 0)
&& (match_buf->pd_unit != matches[i].pd_unit))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_NAME) != 0)
&& (strncmp(matches[i].pd_name, match_buf->pd_name,
sizeof(match_buf->pd_name)) != 0))
continue;
return(0);
}
return(1);
}
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
static int
This commit fixes various 64bit portability problems required for FreeBSD/alpha. The most significant item is to change the command argument to ioctl functions from int to u_long. This change brings us inline with various other BSD versions. Driver writers may like to use (__FreeBSD_version == 300003) to detect this change. The prototype FreeBSD/alpha machdep will follow in a couple of days time.
1998-06-07 17:13:14 +00:00
pci_ioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
{
struct pci_io *io;
int error;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
if (!(flag & FWRITE))
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
return EPERM;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
switch(cmd) {
case PCIOCGETCONF:
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
{
struct pci_devinfo *dinfo;
struct pci_conf_io *cio;
struct devlist *devlist_head;
struct pci_match_conf *pattern_buf;
int num_patterns;
size_t iolen;
int ionum, i;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
cio = (struct pci_conf_io *)data;
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
num_patterns = 0;
dinfo = NULL;
/*
* Hopefully the user won't pass in a null pointer, but it
* can't hurt to check.
*/
if (cio == NULL) {
error = EINVAL;
break;
}
/*
* If the user specified an offset into the device list,
* but the list has changed since they last called this
* ioctl, tell them that the list has changed. They will
* have to get the list from the beginning.
*/
if ((cio->offset != 0)
&& (cio->generation != pci_generation)){
cio->num_matches = 0;
cio->status = PCI_GETCONF_LIST_CHANGED;
error = 0;
break;
}
/*
* Check to see whether the user has asked for an offset
* past the end of our list.
*/
if (cio->offset >= pci_numdevs) {
cio->num_matches = 0;
cio->status = PCI_GETCONF_LAST_DEVICE;
error = 0;
break;
}
/* get the head of the device queue */
devlist_head = &pci_devq;
/*
* Determine how much room we have for pci_conf structures.
* Round the user's buffer size down to the nearest
* multiple of sizeof(struct pci_conf) in case the user
* didn't specify a multiple of that size.
*/
iolen = min(cio->match_buf_len -
(cio->match_buf_len % sizeof(struct pci_conf)),
pci_numdevs * sizeof(struct pci_conf));
/*
* Since we know that iolen is a multiple of the size of
* the pciconf union, it's okay to do this.
*/
ionum = iolen / sizeof(struct pci_conf);
/*
* If this test is true, the user wants the pci_conf
* structures returned to match the supplied entries.
*/
if ((cio->num_patterns > 0)
&& (cio->pat_buf_len > 0)) {
/*
* pat_buf_len needs to be:
* num_patterns * sizeof(struct pci_match_conf)
* While it is certainly possible the user just
* allocated a large buffer, but set the number of
* matches correctly, it is far more likely that
* their kernel doesn't match the userland utility
* they're using. It's also possible that the user
* forgot to initialize some variables. Yes, this
* may be overly picky, but I hazard to guess that
* it's far more likely to just catch folks that
* updated their kernel but not their userland.
*/
if ((cio->num_patterns *
sizeof(struct pci_match_conf)) != cio->pat_buf_len){
/* The user made a mistake, return an error*/
cio->status = PCI_GETCONF_ERROR;
printf("pci_ioctl: pat_buf_len %d != "
"num_patterns (%d) * sizeof(struct "
"pci_match_conf) (%d)\npci_ioctl: "
"pat_buf_len should be = %d\n",
cio->pat_buf_len, cio->num_patterns,
sizeof(struct pci_match_conf),
sizeof(struct pci_match_conf) *
cio->num_patterns);
printf("pci_ioctl: do your headers match your "
"kernel?\n");
cio->num_matches = 0;
error = EINVAL;
break;
}
/*
* Check the user's buffer to make sure it's readable.
*/
if ((error = useracc((caddr_t)cio->patterns,
cio->pat_buf_len, B_READ)) != 1){
Some workarounds for a common DEC pci-pci bridge found on alphas. Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
printf("pci_ioctl: pattern buffer %#p, "
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
"length %u isn't user accessible for"
Some workarounds for a common DEC pci-pci bridge found on alphas. Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
" READ\n", cio->patterns,
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
cio->pat_buf_len);
error = EACCES;
break;
}
/*
* Allocate a buffer to hold the patterns.
*/
pattern_buf = malloc(cio->pat_buf_len, M_TEMP,
M_WAITOK);
error = copyin(cio->patterns, pattern_buf,
cio->pat_buf_len);
if (error != 0)
break;
num_patterns = cio->num_patterns;
} else if ((cio->num_patterns > 0)
|| (cio->pat_buf_len > 0)) {
/*
* The user made a mistake, spit out an error.
*/
cio->status = PCI_GETCONF_ERROR;
cio->num_matches = 0;
printf("pci_ioctl: invalid GETCONF arguments\n");
error = EINVAL;
break;
} else
pattern_buf = NULL;
/*
* Make sure we can write to the match buffer.
*/
if ((error = useracc((caddr_t)cio->matches, cio->match_buf_len,
B_WRITE)) != 1) {
Some workarounds for a common DEC pci-pci bridge found on alphas. Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
printf("pci_ioctl: match buffer %#p, length %u "
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
"isn't user accessible for WRITE\n",
Some workarounds for a common DEC pci-pci bridge found on alphas. Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
cio->matches, cio->match_buf_len);
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
error = EACCES;
break;
}
/*
* Go through the list of devices and copy out the devices
* that match the user's criteria.
*/
for (cio->num_matches = 0, error = 0, i = 0,
dinfo = STAILQ_FIRST(devlist_head);
(dinfo != NULL) && (cio->num_matches < ionum)
&& (error == 0) && (i < pci_numdevs);
dinfo = STAILQ_NEXT(dinfo, pci_links), i++) {
if (i < cio->offset)
continue;
if ((pattern_buf == NULL) ||
(pci_conf_match(pattern_buf, num_patterns,
&dinfo->conf) == 0)) {
/*
* If we've filled up the user's buffer,
* break out at this point. Since we've
* got a match here, we'll pick right back
* up at the matching entry. We can also
* tell the user that there are more matches
* left.
*/
if (cio->num_matches >= ionum)
break;
error = copyout(&dinfo->conf,
&cio->matches[cio->num_matches],
sizeof(struct pci_conf));
cio->num_matches++;
}
}
/*
* Set the pointer into the list, so if the user is getting
* n records at a time, where n < pci_numdevs,
*/
cio->offset = i;
/*
* Set the generation, the user will need this if they make
* another ioctl call with offset != 0.
*/
cio->generation = pci_generation;
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
Revive PCIConf. Submitted by: "Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
/*
* If this is the last device, inform the user so he won't
* bother asking for more devices. If dinfo isn't NULL, we
* know that there are more matches in the list because of
* the way the traversal is done.
*/
if (dinfo == NULL)
cio->status = PCI_GETCONF_LAST_DEVICE;
else
cio->status = PCI_GETCONF_MORE_DEVS;
if (pattern_buf != NULL)
free(pattern_buf, M_TEMP);
break;
}
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
case PCIOCREAD:
io = (struct pci_io *)data;
switch(io->pi_width) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcicfgregs probe;
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
case 4:
case 2:
case 1:
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
probe.bus = io->pi_sel.pc_bus;
probe.slot = io->pi_sel.pc_dev;
probe.func = io->pi_sel.pc_func;
io->pi_data = pci_cfgread(&probe,
io->pi_reg, io->pi_width);
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
error = 0;
break;
default:
error = ENODEV;
break;
}
break;
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
case PCIOCWRITE:
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
io = (struct pci_io *)data;
switch(io->pi_width) {
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
pcicfgregs probe;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
case 4:
case 2:
case 1:
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
probe.bus = io->pi_sel.pc_bus;
probe.slot = io->pi_sel.pc_dev;
probe.func = io->pi_sel.pc_func;
pci_cfgwrite(&probe,
io->pi_reg, io->pi_data, io->pi_width);
error = 0;
break;
Add PCI LKM support.
1997-01-21 23:23:40 +00:00
default:
error = ENODEV;
break;
}
break;
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
default:
error = ENOTTY;
break;
}
return (error);
}
#define PCI_CDEV 78
static struct cdevsw pcicdev = {
pci_open, pci_close, noread, nowrite, pci_ioctl, nostop, noreset,
Update select -> poll in drivers.
1997-09-14 03:19:42 +00:00
nodevtotty, seltrue, nommap, nostrategy, "pci", 0, PCI_CDEV
Add support for ioctl() accesses to PCI config space registers. Garrett Wollman sent me this code a few weeks ago for review, and I made some significant changes, which he in turn accepted ... In order to make use of these changes, a device entry has to added to /dev. Submitted by: wollman
1996-10-22 20:20:14 +00:00
};
#ifdef DEVFS
static void *pci_devfs_token;
#endif
static void
pci_cdevinit(void *dummy)
{
dev_t dev;
dev = makedev(PCI_CDEV, 0);
cdevsw_add(&dev, &pcicdev, NULL);
#ifdef DEVFS
pci_devfs_token = devfs_add_devswf(&pcicdev, 0, DV_CHR,
UID_ROOT, GID_WHEEL, 0644, "pci");
#endif
}
SYSINIT(pcidev, SI_SUB_DRIVERS, SI_ORDER_MIDDLE+PCI_CDEV, pci_cdevinit, NULL);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#endif /* NPCI > 0 */
Reference in New Issue Copy Permalink