freebsd-skq/usr.sbin/bhyve/bhyverun.c

1012 lines
22 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2011 NetApp, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#ifndef WITHOUT_CAPSICUM
#include <sys/capsicum.h>
#endif
#include <sys/mman.h>
#include <sys/time.h>
#include <machine/atomic.h>
#include <machine/segments.h>
#ifndef WITHOUT_CAPSICUM
#include <capsicum_helpers.h>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <err.h>
#include <errno.h>
#include <libgen.h>
#include <unistd.h>
#include <assert.h>
#include <errno.h>
#include <pthread.h>
#include <pthread_np.h>
#include <sysexits.h>
#include <stdbool.h>
#include <machine/vmm.h>
#ifndef WITHOUT_CAPSICUM
#include <machine/vmm_dev.h>
#endif
#include <vmmapi.h>
#include "bhyverun.h"
#include "acpi.h"
#include "atkbdc.h"
#include "inout.h"
#include "dbgport.h"
#include "fwctl.h"
#include "ioapic.h"
#include "mem.h"
#include "mevent.h"
#include "mptbl.h"
#include "pci_emul.h"
2014-05-15 14:16:55 +00:00
#include "pci_irq.h"
Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached to a virtual machine then we implicitly create COM1 and COM2 ISA devices. Prior to this change the only way of attaching a COM port to the virtual machine was by presenting it as a PCI device that is mapped at the legacy I/O address 0x3F8 or 0x2F8. There were some issues with the original approach: - It did not work at all with UEFI because UEFI will reprogram the PCI device BARs and remap the COM1/COM2 ports at non-legacy addresses. - OpenBSD GENERIC kernel does not create a /dev/console because it expects the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device. - It was functional with a FreeBSD guest but caused the console to appear on /dev/ttyu2 which was not intuitive. The uart emulation is now independent of the bus on which it resides. Thus it is possible to have uart devices on the PCI bus in addition to the legacy COM1/COM2 devices behind the LPC bus. The command line option to attach ISA COM1/COM2 ports to a virtual machine is "-s <bus>,lpc -l com1,stdio". The command line option to create a PCI-attached uart device is: "-s <bus>,uart[,stdio]" The command line option to create PCI-attached COM1/COM2 device is: "-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated. Discussed with: grehan Reviewed by: grehan Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com) M share/examples/bhyve/vmrun.sh AM usr.sbin/bhyve/legacy_irq.c AM usr.sbin/bhyve/legacy_irq.h M usr.sbin/bhyve/Makefile AM usr.sbin/bhyve/uart_emul.c M usr.sbin/bhyve/bhyverun.c AM usr.sbin/bhyve/uart_emul.h M usr.sbin/bhyve/pci_uart.c M usr.sbin/bhyve/pci_emul.c M usr.sbin/bhyve/inout.c M usr.sbin/bhyve/pci_emul.h M usr.sbin/bhyve/inout.h AM usr.sbin/bhyve/pci_lpc.c AM usr.sbin/bhyve/pci_lpc.h
2013-10-29 00:18:11 +00:00
#include "pci_lpc.h"
#include "smbiostbl.h"
#include "xmsr.h"
#include "spinup_ap.h"
#include "rtc.h"
#define GUEST_NIO_PORT 0x488 /* guest upcalls via i/o port */
#define MB (1024UL * 1024)
#define GB (1024UL * MB)
typedef int (*vmexit_handler_t)(struct vmctx *, struct vm_exit *, int *vcpu);
extern int vmexit_task_switch(struct vmctx *, struct vm_exit *, int *vcpu);
char *vmname;
int guest_ncpus;
char *guest_uuid_str;
static int guest_vmexit_on_hlt, guest_vmexit_on_pause;
static int virtio_msix = 1;
static int x2apic_mode = 0; /* default is xAPIC */
static int strictio;
static int strictmsr = 1;
static int acpi;
static char *progname;
static const int BSP = 0;
static cpuset_t cpumask;
static void vm_loop(struct vmctx *ctx, int vcpu, uint64_t rip);
static struct vm_exit vmexit[VM_MAXCPU];
struct bhyvestats {
uint64_t vmexit_bogus;
uint64_t vmexit_reqidle;
uint64_t vmexit_hlt;
uint64_t vmexit_pause;
uint64_t vmexit_mtrap;
Merge projects/bhyve_npt_pmap into head. Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory. Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT. pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT. The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest. Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'. An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR) The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@). The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap. TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB. Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose. PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them. Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable. Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement. Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions. Special thanks to Peter Holm for testing the patch on short notice. Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
2013-10-05 21:22:35 +00:00
uint64_t vmexit_inst_emul;
uint64_t cpu_switch_rotate;
uint64_t cpu_switch_direct;
} stats;
struct mt_vmm_info {
pthread_t mt_thr;
struct vmctx *mt_ctx;
int mt_vcpu;
} mt_vmm_info[VM_MAXCPU];
static cpuset_t *vcpumap[VM_MAXCPU] = { NULL };
static void
usage(int code)
{
fprintf(stderr,
"Usage: %s [-abehuwxACHPSWY] [-c vcpus] [-g <gdb port>] [-l <lpc>]\n"
" %*s [-m mem] [-p vcpu:hostcpu] [-s <pci>] [-U uuid] <vm>\n"
" -a: local apic is in xAPIC mode (deprecated)\n"
" -A: create ACPI tables\n"
" -c: # cpus (default 1)\n"
" -C: include guest memory in core file\n"
" -e: exit on unhandled I/O access\n"
" -g: gdb port\n"
" -h: help\n"
" -H: vmexit from the guest on hlt\n"
Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached to a virtual machine then we implicitly create COM1 and COM2 ISA devices. Prior to this change the only way of attaching a COM port to the virtual machine was by presenting it as a PCI device that is mapped at the legacy I/O address 0x3F8 or 0x2F8. There were some issues with the original approach: - It did not work at all with UEFI because UEFI will reprogram the PCI device BARs and remap the COM1/COM2 ports at non-legacy addresses. - OpenBSD GENERIC kernel does not create a /dev/console because it expects the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device. - It was functional with a FreeBSD guest but caused the console to appear on /dev/ttyu2 which was not intuitive. The uart emulation is now independent of the bus on which it resides. Thus it is possible to have uart devices on the PCI bus in addition to the legacy COM1/COM2 devices behind the LPC bus. The command line option to attach ISA COM1/COM2 ports to a virtual machine is "-s <bus>,lpc -l com1,stdio". The command line option to create a PCI-attached uart device is: "-s <bus>,uart[,stdio]" The command line option to create PCI-attached COM1/COM2 device is: "-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated. Discussed with: grehan Reviewed by: grehan Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com) M share/examples/bhyve/vmrun.sh AM usr.sbin/bhyve/legacy_irq.c AM usr.sbin/bhyve/legacy_irq.h M usr.sbin/bhyve/Makefile AM usr.sbin/bhyve/uart_emul.c M usr.sbin/bhyve/bhyverun.c AM usr.sbin/bhyve/uart_emul.h M usr.sbin/bhyve/pci_uart.c M usr.sbin/bhyve/pci_emul.c M usr.sbin/bhyve/inout.c M usr.sbin/bhyve/pci_emul.h M usr.sbin/bhyve/inout.h AM usr.sbin/bhyve/pci_lpc.c AM usr.sbin/bhyve/pci_lpc.h
2013-10-29 00:18:11 +00:00
" -l: LPC device configuration\n"
" -m: memory size in MB\n"
" -p: pin 'vcpu' to 'hostcpu'\n"
" -P: vmexit from the guest on pause\n"
" -s: <slot,driver,configinfo> PCI slot config\n"
" -S: guest memory cannot be swapped\n"
" -u: RTC keeps UTC time\n"
" -U: uuid\n"
" -w: ignore unimplemented MSRs\n"
" -W: force virtio to use single-vector MSI\n"
" -x: local apic is in x2APIC mode\n"
" -Y: disable MPtable generation\n",
progname, (int)strlen(progname), "");
exit(code);
}
static int
pincpu_parse(const char *opt)
{
int vcpu, pcpu;
if (sscanf(opt, "%d:%d", &vcpu, &pcpu) != 2) {
fprintf(stderr, "invalid format: %s\n", opt);
return (-1);
}
if (vcpu < 0 || vcpu >= VM_MAXCPU) {
fprintf(stderr, "vcpu '%d' outside valid range from 0 to %d\n",
vcpu, VM_MAXCPU - 1);
return (-1);
}
if (pcpu < 0 || pcpu >= CPU_SETSIZE) {
fprintf(stderr, "hostcpu '%d' outside valid range from "
"0 to %d\n", pcpu, CPU_SETSIZE - 1);
return (-1);
}
if (vcpumap[vcpu] == NULL) {
if ((vcpumap[vcpu] = malloc(sizeof(cpuset_t))) == NULL) {
perror("malloc");
return (-1);
}
CPU_ZERO(vcpumap[vcpu]);
}
CPU_SET(pcpu, vcpumap[vcpu]);
return (0);
}
void
vm_inject_fault(void *arg, int vcpu, int vector, int errcode_valid,
int errcode)
{
struct vmctx *ctx;
int error, restart_instruction;
ctx = arg;
restart_instruction = 1;
error = vm_inject_exception(ctx, vcpu, vector, errcode_valid, errcode,
restart_instruction);
assert(error == 0);
}
void *
paddr_guest2host(struct vmctx *ctx, uintptr_t gaddr, size_t len)
{
return (vm_map_gpa(ctx, gaddr, len));
}
int
fbsdrun_vmexit_on_pause(void)
{
return (guest_vmexit_on_pause);
}
int
fbsdrun_vmexit_on_hlt(void)
{
return (guest_vmexit_on_hlt);
}
int
fbsdrun_virtio_msix(void)
{
return (virtio_msix);
}
static void *
fbsdrun_start_thread(void *param)
{
char tname[MAXCOMLEN + 1];
struct mt_vmm_info *mtp;
int vcpu;
mtp = param;
vcpu = mtp->mt_vcpu;
snprintf(tname, sizeof(tname), "vcpu %d", vcpu);
pthread_set_name_np(mtp->mt_thr, tname);
vm_loop(mtp->mt_ctx, vcpu, vmexit[vcpu].rip);
/* not reached */
exit(1);
return (NULL);
}
void
fbsdrun_addcpu(struct vmctx *ctx, int fromcpu, int newcpu, uint64_t rip)
{
int error;
assert(fromcpu == BSP);
/*
* The 'newcpu' must be activated in the context of 'fromcpu'. If
* vm_activate_cpu() is delayed until newcpu's pthread starts running
* then vmm.ko is out-of-sync with bhyve and this can create a race
* with vm_suspend().
*/
error = vm_activate_cpu(ctx, newcpu);
if (error != 0)
err(EX_OSERR, "could not activate CPU %d", newcpu);
CPU_SET_ATOMIC(newcpu, &cpumask);
/*
* Set up the vmexit struct to allow execution to start
* at the given RIP
*/
vmexit[newcpu].rip = rip;
vmexit[newcpu].inst_length = 0;
mt_vmm_info[newcpu].mt_ctx = ctx;
mt_vmm_info[newcpu].mt_vcpu = newcpu;
Merge projects/bhyve_npt_pmap into head. Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory. Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT. pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT. The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest. Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'. An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR) The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@). The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap. TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB. Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose. PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them. Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable. Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement. Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions. Special thanks to Peter Holm for testing the patch on short notice. Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
2013-10-05 21:22:35 +00:00
error = pthread_create(&mt_vmm_info[newcpu].mt_thr, NULL,
fbsdrun_start_thread, &mt_vmm_info[newcpu]);
Merge projects/bhyve_npt_pmap into head. Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory. Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT. pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT. The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest. Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'. An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR) The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@). The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap. TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB. Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose. PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them. Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable. Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement. Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions. Special thanks to Peter Holm for testing the patch on short notice. Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
2013-10-05 21:22:35 +00:00
assert(error == 0);
}
static int
fbsdrun_deletecpu(struct vmctx *ctx, int vcpu)
{
if (!CPU_ISSET(vcpu, &cpumask)) {
fprintf(stderr, "Attempting to delete unknown cpu %d\n", vcpu);
exit(1);
}
CPU_CLR_ATOMIC(vcpu, &cpumask);
return (CPU_EMPTY(&cpumask));
}
static int
vmexit_handle_notify(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu,
uint32_t eax)
{
#if BHYVE_DEBUG
/*
* put guest-driven debug here
*/
#endif
return (VMEXIT_CONTINUE);
}
static int
vmexit_inout(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu)
{
int error;
int bytes, port, in, out;
int vcpu;
vcpu = *pvcpu;
port = vme->u.inout.port;
bytes = vme->u.inout.bytes;
in = vme->u.inout.in;
out = !in;
/* Extra-special case of host notifications */
if (out && port == GUEST_NIO_PORT) {
error = vmexit_handle_notify(ctx, vme, pvcpu, vme->u.inout.eax);
return (error);
}
error = emulate_inout(ctx, vcpu, vme, strictio);
if (error) {
fprintf(stderr, "Unhandled %s%c 0x%04x at 0x%lx\n",
in ? "in" : "out",
bytes == 1 ? 'b' : (bytes == 2 ? 'w' : 'l'),
port, vmexit->rip);
return (VMEXIT_ABORT);
} else {
return (VMEXIT_CONTINUE);
}
}
static int
vmexit_rdmsr(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu)
{
uint64_t val;
uint32_t eax, edx;
int error;
val = 0;
error = emulate_rdmsr(ctx, *pvcpu, vme->u.msr.code, &val);
if (error != 0) {
fprintf(stderr, "rdmsr to register %#x on vcpu %d\n",
vme->u.msr.code, *pvcpu);
if (strictmsr) {
vm_inject_gp(ctx, *pvcpu);
return (VMEXIT_CONTINUE);
}
}
eax = val;
error = vm_set_register(ctx, *pvcpu, VM_REG_GUEST_RAX, eax);
assert(error == 0);
edx = val >> 32;
error = vm_set_register(ctx, *pvcpu, VM_REG_GUEST_RDX, edx);
assert(error == 0);
return (VMEXIT_CONTINUE);
}
static int
vmexit_wrmsr(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu)
{
int error;
error = emulate_wrmsr(ctx, *pvcpu, vme->u.msr.code, vme->u.msr.wval);
if (error != 0) {
fprintf(stderr, "wrmsr to register %#x(%#lx) on vcpu %d\n",
vme->u.msr.code, vme->u.msr.wval, *pvcpu);
if (strictmsr) {
vm_inject_gp(ctx, *pvcpu);
return (VMEXIT_CONTINUE);
}
}
return (VMEXIT_CONTINUE);
}
static int
vmexit_spinup_ap(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu)
{
(void)spinup_ap(ctx, *pvcpu,
vme->u.spinup_ap.vcpu, vme->u.spinup_ap.rip);
return (VMEXIT_CONTINUE);
}
#define DEBUG_EPT_MISCONFIG
#ifdef DEBUG_EPT_MISCONFIG
#define EXIT_REASON_EPT_MISCONFIG 49
#define VMCS_GUEST_PHYSICAL_ADDRESS 0x00002400
#define VMCS_IDENT(x) ((x) | 0x80000000)
static uint64_t ept_misconfig_gpa, ept_misconfig_pte[4];
static int ept_misconfig_ptenum;
#endif
static int
vmexit_vmx(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
fprintf(stderr, "vm exit[%d]\n", *pvcpu);
fprintf(stderr, "\treason\t\tVMX\n");
fprintf(stderr, "\trip\t\t0x%016lx\n", vmexit->rip);
fprintf(stderr, "\tinst_length\t%d\n", vmexit->inst_length);
fprintf(stderr, "\tstatus\t\t%d\n", vmexit->u.vmx.status);
fprintf(stderr, "\texit_reason\t%u\n", vmexit->u.vmx.exit_reason);
fprintf(stderr, "\tqualification\t0x%016lx\n",
vmexit->u.vmx.exit_qualification);
fprintf(stderr, "\tinst_type\t\t%d\n", vmexit->u.vmx.inst_type);
fprintf(stderr, "\tinst_error\t\t%d\n", vmexit->u.vmx.inst_error);
#ifdef DEBUG_EPT_MISCONFIG
if (vmexit->u.vmx.exit_reason == EXIT_REASON_EPT_MISCONFIG) {
vm_get_register(ctx, *pvcpu,
VMCS_IDENT(VMCS_GUEST_PHYSICAL_ADDRESS),
&ept_misconfig_gpa);
vm_get_gpa_pmap(ctx, ept_misconfig_gpa, ept_misconfig_pte,
&ept_misconfig_ptenum);
fprintf(stderr, "\tEPT misconfiguration:\n");
fprintf(stderr, "\t\tGPA: %#lx\n", ept_misconfig_gpa);
fprintf(stderr, "\t\tPTE(%d): %#lx %#lx %#lx %#lx\n",
ept_misconfig_ptenum, ept_misconfig_pte[0],
ept_misconfig_pte[1], ept_misconfig_pte[2],
ept_misconfig_pte[3]);
}
#endif /* DEBUG_EPT_MISCONFIG */
return (VMEXIT_ABORT);
}
static int
vmexit_svm(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
fprintf(stderr, "vm exit[%d]\n", *pvcpu);
fprintf(stderr, "\treason\t\tSVM\n");
fprintf(stderr, "\trip\t\t0x%016lx\n", vmexit->rip);
fprintf(stderr, "\tinst_length\t%d\n", vmexit->inst_length);
fprintf(stderr, "\texitcode\t%#lx\n", vmexit->u.svm.exitcode);
fprintf(stderr, "\texitinfo1\t%#lx\n", vmexit->u.svm.exitinfo1);
fprintf(stderr, "\texitinfo2\t%#lx\n", vmexit->u.svm.exitinfo2);
return (VMEXIT_ABORT);
}
static int
vmexit_bogus(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
assert(vmexit->inst_length == 0);
stats.vmexit_bogus++;
return (VMEXIT_CONTINUE);
}
static int
vmexit_reqidle(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
assert(vmexit->inst_length == 0);
stats.vmexit_reqidle++;
return (VMEXIT_CONTINUE);
}
static int
vmexit_hlt(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
stats.vmexit_hlt++;
/*
* Just continue execution with the next instruction. We use
* the HLT VM exit as a way to be friendly with the host
* scheduler.
*/
return (VMEXIT_CONTINUE);
}
static int
vmexit_pause(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
stats.vmexit_pause++;
return (VMEXIT_CONTINUE);
}
static int
vmexit_mtrap(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
assert(vmexit->inst_length == 0);
stats.vmexit_mtrap++;
return (VMEXIT_CONTINUE);
}
static int
Merge projects/bhyve_npt_pmap into head. Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory. Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT. pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT. The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest. Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'. An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR) The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@). The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap. TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB. Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose. PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them. Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable. Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement. Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions. Special thanks to Peter Holm for testing the patch on short notice. Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
2013-10-05 21:22:35 +00:00
vmexit_inst_emul(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
int err, i;
struct vie *vie;
Merge projects/bhyve_npt_pmap into head. Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory. Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT. pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT. The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest. Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'. An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR) The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@). The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap. TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB. Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose. PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them. Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable. Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement. Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions. Special thanks to Peter Holm for testing the patch on short notice. Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
2013-10-05 21:22:35 +00:00
stats.vmexit_inst_emul++;
vie = &vmexit->u.inst_emul.vie;
Merge projects/bhyve_npt_pmap into head. Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory. Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT. pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT. The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest. Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'. An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR) The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@). The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap. TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB. Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose. PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them. Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable. Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement. Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions. Special thanks to Peter Holm for testing the patch on short notice. Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
2013-10-05 21:22:35 +00:00
err = emulate_mem(ctx, *pvcpu, vmexit->u.inst_emul.gpa,
vie, &vmexit->u.inst_emul.paging);
if (err) {
if (err == ESRCH) {
fprintf(stderr, "Unhandled memory access to 0x%lx\n",
Merge projects/bhyve_npt_pmap into head. Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory. Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT. pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT. The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest. Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'. An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR) The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@). The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap. TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB. Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose. PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them. Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable. Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement. Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions. Special thanks to Peter Holm for testing the patch on short notice. Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
2013-10-05 21:22:35 +00:00
vmexit->u.inst_emul.gpa);
}
fprintf(stderr, "Failed to emulate instruction [");
for (i = 0; i < vie->num_valid; i++) {
fprintf(stderr, "0x%02x%s", vie->inst[i],
i != (vie->num_valid - 1) ? " " : "");
}
fprintf(stderr, "] at 0x%lx\n", vmexit->rip);
return (VMEXIT_ABORT);
}
return (VMEXIT_CONTINUE);
}
static pthread_mutex_t resetcpu_mtx = PTHREAD_MUTEX_INITIALIZER;
static pthread_cond_t resetcpu_cond = PTHREAD_COND_INITIALIZER;
static int
vmexit_suspend(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
enum vm_suspend_how how;
how = vmexit->u.suspended.how;
fbsdrun_deletecpu(ctx, *pvcpu);
if (*pvcpu != BSP) {
pthread_mutex_lock(&resetcpu_mtx);
pthread_cond_signal(&resetcpu_cond);
pthread_mutex_unlock(&resetcpu_mtx);
pthread_exit(NULL);
}
pthread_mutex_lock(&resetcpu_mtx);
while (!CPU_EMPTY(&cpumask)) {
pthread_cond_wait(&resetcpu_cond, &resetcpu_mtx);
}
pthread_mutex_unlock(&resetcpu_mtx);
switch (how) {
case VM_SUSPEND_RESET:
exit(0);
case VM_SUSPEND_POWEROFF:
exit(1);
case VM_SUSPEND_HALT:
exit(2);
case VM_SUSPEND_TRIPLEFAULT:
exit(3);
default:
fprintf(stderr, "vmexit_suspend: invalid reason %d\n", how);
exit(100);
}
return (0); /* NOTREACHED */
}
static vmexit_handler_t handler[VM_EXITCODE_MAX] = {
[VM_EXITCODE_INOUT] = vmexit_inout,
[VM_EXITCODE_INOUT_STR] = vmexit_inout,
[VM_EXITCODE_VMX] = vmexit_vmx,
[VM_EXITCODE_SVM] = vmexit_svm,
[VM_EXITCODE_BOGUS] = vmexit_bogus,
[VM_EXITCODE_REQIDLE] = vmexit_reqidle,
[VM_EXITCODE_RDMSR] = vmexit_rdmsr,
[VM_EXITCODE_WRMSR] = vmexit_wrmsr,
[VM_EXITCODE_MTRAP] = vmexit_mtrap,
Merge projects/bhyve_npt_pmap into head. Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory. Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT. pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT. The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest. Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'. An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR) The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@). The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap. TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB. Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose. PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them. Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable. Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement. Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions. Special thanks to Peter Holm for testing the patch on short notice. Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
2013-10-05 21:22:35 +00:00
[VM_EXITCODE_INST_EMUL] = vmexit_inst_emul,
[VM_EXITCODE_SPINUP_AP] = vmexit_spinup_ap,
[VM_EXITCODE_SUSPENDED] = vmexit_suspend,
[VM_EXITCODE_TASK_SWITCH] = vmexit_task_switch,
};
static void
vm_loop(struct vmctx *ctx, int vcpu, uint64_t startrip)
{
int error, rc;
enum vm_exitcode exitcode;
cpuset_t active_cpus;
if (vcpumap[vcpu] != NULL) {
error = pthread_setaffinity_np(pthread_self(),
sizeof(cpuset_t), vcpumap[vcpu]);
assert(error == 0);
}
error = vm_active_cpus(ctx, &active_cpus);
assert(CPU_ISSET(vcpu, &active_cpus));
error = vm_set_register(ctx, vcpu, VM_REG_GUEST_RIP, startrip);
assert(error == 0);
while (1) {
error = vm_run(ctx, vcpu, &vmexit[vcpu]);
if (error != 0)
break;
exitcode = vmexit[vcpu].exitcode;
if (exitcode >= VM_EXITCODE_MAX || handler[exitcode] == NULL) {
fprintf(stderr, "vm_loop: unexpected exitcode 0x%x\n",
exitcode);
exit(1);
}
rc = (*handler[exitcode])(ctx, &vmexit[vcpu], &vcpu);
switch (rc) {
case VMEXIT_CONTINUE:
break;
case VMEXIT_ABORT:
abort();
default:
exit(1);
}
}
fprintf(stderr, "vm_run error %d, errno %d\n", error, errno);
}
static int
num_vcpus_allowed(struct vmctx *ctx)
{
int tmp, error;
error = vm_get_capability(ctx, BSP, VM_CAP_UNRESTRICTED_GUEST, &tmp);
/*
* The guest is allowed to spinup more than one processor only if the
* UNRESTRICTED_GUEST capability is available.
*/
if (error == 0)
return (VM_MAXCPU);
else
return (1);
}
void
fbsdrun_set_capabilities(struct vmctx *ctx, int cpu)
{
int err, tmp;
if (fbsdrun_vmexit_on_hlt()) {
err = vm_get_capability(ctx, cpu, VM_CAP_HALT_EXIT, &tmp);
if (err < 0) {
fprintf(stderr, "VM exit on HLT not supported\n");
exit(1);
}
vm_set_capability(ctx, cpu, VM_CAP_HALT_EXIT, 1);
if (cpu == BSP)
handler[VM_EXITCODE_HLT] = vmexit_hlt;
}
if (fbsdrun_vmexit_on_pause()) {
/*
* pause exit support required for this mode
*/
err = vm_get_capability(ctx, cpu, VM_CAP_PAUSE_EXIT, &tmp);
if (err < 0) {
fprintf(stderr,
"SMP mux requested, no pause support\n");
exit(1);
}
vm_set_capability(ctx, cpu, VM_CAP_PAUSE_EXIT, 1);
if (cpu == BSP)
handler[VM_EXITCODE_PAUSE] = vmexit_pause;
}
if (x2apic_mode)
err = vm_set_x2apic_state(ctx, cpu, X2APIC_ENABLED);
else
err = vm_set_x2apic_state(ctx, cpu, X2APIC_DISABLED);
if (err) {
fprintf(stderr, "Unable to set x2apic state (%d)\n", err);
exit(1);
}
vm_set_capability(ctx, cpu, VM_CAP_ENABLE_INVPCID, 1);
}
static struct vmctx *
do_open(const char *vmname)
{
struct vmctx *ctx;
int error;
bool reinit, romboot;
#ifndef WITHOUT_CAPSICUM
cap_rights_t rights;
const cap_ioctl_t *cmds;
size_t ncmds;
#endif
reinit = romboot = false;
if (lpc_bootrom())
romboot = true;
error = vm_create(vmname);
if (error) {
if (errno == EEXIST) {
if (romboot) {
reinit = true;
} else {
/*
* The virtual machine has been setup by the
* userspace bootloader.
*/
}
} else {
perror("vm_create");
exit(1);
}
} else {
if (!romboot) {
/*
* If the virtual machine was just created then a
* bootrom must be configured to boot it.
*/
fprintf(stderr, "virtual machine cannot be booted\n");
exit(1);
}
}
ctx = vm_open(vmname);
if (ctx == NULL) {
perror("vm_open");
exit(1);
}
#ifndef WITHOUT_CAPSICUM
cap_rights_init(&rights, CAP_IOCTL, CAP_MMAP_RW);
if (cap_rights_limit(vm_get_device_fd(ctx), &rights) == -1 &&
errno != ENOSYS)
errx(EX_OSERR, "Unable to apply rights for sandbox");
vm_get_ioctls(&ncmds);
cmds = vm_get_ioctls(NULL);
if (cmds == NULL)
errx(EX_OSERR, "out of memory");
if (cap_ioctls_limit(vm_get_device_fd(ctx), cmds, ncmds) == -1 &&
errno != ENOSYS)
errx(EX_OSERR, "Unable to apply rights for sandbox");
free((cap_ioctl_t *)cmds);
#endif
if (reinit) {
error = vm_reinit(ctx);
if (error) {
perror("vm_reinit");
exit(1);
}
}
return (ctx);
}
int
main(int argc, char *argv[])
{
int c, error, gdb_port, err, bvmcons;
int max_vcpus, mptgen, memflags;
int rtc_localtime;
struct vmctx *ctx;
uint64_t rip;
size_t memsize;
char *optstr;
bvmcons = 0;
progname = basename(argv[0]);
gdb_port = 0;
guest_ncpus = 1;
memsize = 256 * MB;
mptgen = 1;
rtc_localtime = 1;
memflags = 0;
optstr = "abehuwxACHIPSWYp:g:c:s:m:l:U:";
while ((c = getopt(argc, argv, optstr)) != -1) {
switch (c) {
case 'a':
x2apic_mode = 0;
break;
case 'A':
acpi = 1;
break;
case 'b':
bvmcons = 1;
break;
case 'p':
if (pincpu_parse(optarg) != 0) {
errx(EX_USAGE, "invalid vcpu pinning "
"configuration '%s'", optarg);
}
break;
case 'c':
guest_ncpus = atoi(optarg);
break;
case 'C':
memflags |= VM_MEM_F_INCORE;
break;
case 'g':
gdb_port = atoi(optarg);
break;
Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached to a virtual machine then we implicitly create COM1 and COM2 ISA devices. Prior to this change the only way of attaching a COM port to the virtual machine was by presenting it as a PCI device that is mapped at the legacy I/O address 0x3F8 or 0x2F8. There were some issues with the original approach: - It did not work at all with UEFI because UEFI will reprogram the PCI device BARs and remap the COM1/COM2 ports at non-legacy addresses. - OpenBSD GENERIC kernel does not create a /dev/console because it expects the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device. - It was functional with a FreeBSD guest but caused the console to appear on /dev/ttyu2 which was not intuitive. The uart emulation is now independent of the bus on which it resides. Thus it is possible to have uart devices on the PCI bus in addition to the legacy COM1/COM2 devices behind the LPC bus. The command line option to attach ISA COM1/COM2 ports to a virtual machine is "-s <bus>,lpc -l com1,stdio". The command line option to create a PCI-attached uart device is: "-s <bus>,uart[,stdio]" The command line option to create PCI-attached COM1/COM2 device is: "-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated. Discussed with: grehan Reviewed by: grehan Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com) M share/examples/bhyve/vmrun.sh AM usr.sbin/bhyve/legacy_irq.c AM usr.sbin/bhyve/legacy_irq.h M usr.sbin/bhyve/Makefile AM usr.sbin/bhyve/uart_emul.c M usr.sbin/bhyve/bhyverun.c AM usr.sbin/bhyve/uart_emul.h M usr.sbin/bhyve/pci_uart.c M usr.sbin/bhyve/pci_emul.c M usr.sbin/bhyve/inout.c M usr.sbin/bhyve/pci_emul.h M usr.sbin/bhyve/inout.h AM usr.sbin/bhyve/pci_lpc.c AM usr.sbin/bhyve/pci_lpc.h
2013-10-29 00:18:11 +00:00
case 'l':
if (lpc_device_parse(optarg) != 0) {
errx(EX_USAGE, "invalid lpc device "
"configuration '%s'", optarg);
}
break;
case 's':
if (pci_parse_slot(optarg) != 0)
exit(1);
else
break;
case 'S':
memflags |= VM_MEM_F_WIRED;
break;
case 'm':
error = vm_parse_memsize(optarg, &memsize);
if (error)
errx(EX_USAGE, "invalid memsize '%s'", optarg);
break;
case 'H':
guest_vmexit_on_hlt = 1;
break;
case 'I':
/*
* The "-I" option was used to add an ioapic to the
* virtual machine.
*
* An ioapic is now provided unconditionally for each
* virtual machine and this option is now deprecated.
*/
break;
case 'P':
guest_vmexit_on_pause = 1;
break;
case 'e':
strictio = 1;
break;
case 'u':
rtc_localtime = 0;
break;
case 'U':
guest_uuid_str = optarg;
break;
case 'w':
strictmsr = 0;
break;
case 'W':
virtio_msix = 0;
break;
case 'x':
x2apic_mode = 1;
break;
case 'Y':
mptgen = 0;
break;
case 'h':
usage(0);
default:
usage(1);
}
}
argc -= optind;
argv += optind;
if (argc != 1)
usage(1);
vmname = argv[0];
ctx = do_open(vmname);
if (guest_ncpus < 1) {
fprintf(stderr, "Invalid guest vCPUs (%d)\n", guest_ncpus);
exit(1);
}
max_vcpus = num_vcpus_allowed(ctx);
if (guest_ncpus > max_vcpus) {
fprintf(stderr, "%d vCPUs requested but only %d available\n",
guest_ncpus, max_vcpus);
exit(1);
}
fbsdrun_set_capabilities(ctx, BSP);
vm_set_memflags(ctx, memflags);
err = vm_setup_memory(ctx, memsize, VM_MMAP_ALL);
if (err) {
fprintf(stderr, "Unable to setup memory (%d)\n", errno);
exit(1);
}
error = init_msr();
if (error) {
fprintf(stderr, "init_msr error %d", error);
exit(1);
}
init_mem();
init_inout();
atkbdc_init(ctx);
2014-05-15 14:16:55 +00:00
pci_irq_init(ctx);
ioapic_init(ctx);
rtc_init(ctx, rtc_localtime);
2014-05-15 14:16:55 +00:00
sci_init(ctx);
/*
* Exit if a device emulation finds an error in its initilization
*/
if (init_pci(ctx) != 0)
exit(1);
if (gdb_port != 0)
init_dbgport(gdb_port);
if (bvmcons)
init_bvmcons();
if (lpc_bootrom()) {
if (vm_set_capability(ctx, BSP, VM_CAP_UNRESTRICTED_GUEST, 1)) {
fprintf(stderr, "ROM boot failed: unrestricted guest "
"capability not available\n");
exit(1);
}
error = vcpu_reset(ctx, BSP);
assert(error == 0);
}
error = vm_get_register(ctx, BSP, VM_REG_GUEST_RIP, &rip);
assert(error == 0);
/*
* build the guest tables, MP etc.
*/
if (mptgen) {
error = mptable_build(ctx, guest_ncpus);
if (error)
exit(1);
}
error = smbios_build(ctx);
assert(error == 0);
if (acpi) {
error = acpi_build(ctx, guest_ncpus);
assert(error == 0);
}
if (lpc_bootrom())
fwctl_init();
#ifndef WITHOUT_CAPSICUM
caph_cache_catpages();
if (caph_limit_stdout() == -1 || caph_limit_stderr() == -1)
errx(EX_OSERR, "Unable to apply rights for sandbox");
if (cap_enter() == -1 && errno != ENOSYS)
errx(EX_OSERR, "cap_enter() failed");
#endif
/*
* Change the proc title to include the VM name.
*/
setproctitle("%s", vmname);
/*
* Add CPU 0
*/
fbsdrun_addcpu(ctx, BSP, BSP, rip);
/*
* Head off to the main event dispatch loop
*/
mevent_dispatch();
exit(1);
}