freebsd-skq/lib/libvgl/mouse.c

427 lines
12 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1991-1997 Søren Schmidt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
2001-09-16 21:35:07 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <stdio.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/signal.h>
#include <sys/consio.h>
#include <sys/fbio.h>
#include "vgl.h"
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
static void VGLMouseAction(int dummy);
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
#define BORDER 0xff /* default border -- light white in rgb 3:3:2 */
#define INTERIOR 0xa0 /* default interior -- red in rgb 3:3:2 */
#define LARGE_MOUSE_IMG_XSIZE 19
#define LARGE_MOUSE_IMG_YSIZE 32
#define SMALL_MOUSE_IMG_XSIZE 10
#define SMALL_MOUSE_IMG_YSIZE 16
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
#define X 0xff /* any nonzero in And mask means part of cursor */
#define B BORDER
#define I INTERIOR
static byte LargeAndMask[] = {
X,X,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
X,X,X,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
X,X,X,X,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
X,X,X,X,X,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
X,X,X,X,X,X,0,0,0,0,0,0,0,0,0,0,0,0,0,
X,X,X,X,X,X,X,0,0,0,0,0,0,0,0,0,0,0,0,
X,X,X,X,X,X,X,X,0,0,0,0,0,0,0,0,0,0,0,
X,X,X,X,X,X,X,X,X,0,0,0,0,0,0,0,0,0,0,
X,X,X,X,X,X,X,X,X,X,0,0,0,0,0,0,0,0,0,
X,X,X,X,X,X,X,X,X,X,X,0,0,0,0,0,0,0,0,
X,X,X,X,X,X,X,X,X,X,X,X,0,0,0,0,0,0,0,
X,X,X,X,X,X,X,X,X,X,X,X,X,0,0,0,0,0,0,
X,X,X,X,X,X,X,X,X,X,X,X,X,X,0,0,0,0,0,
X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,0,0,0,0,
X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,0,0,0,
X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,0,0,
X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,0,
X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,X,
X,X,X,X,X,X,X,X,X,X,X,X,0,0,0,0,0,0,0,
X,X,X,X,X,X,X,X,X,X,X,X,0,0,0,0,0,0,0,
X,X,X,X,X,X,0,X,X,X,X,X,X,0,0,0,0,0,0,
X,X,X,X,X,0,0,X,X,X,X,X,X,0,0,0,0,0,0,
X,X,X,X,0,0,0,0,X,X,X,X,X,X,0,0,0,0,0,
X,X,X,0,0,0,0,0,X,X,X,X,X,X,0,0,0,0,0,
X,X,0,0,0,0,0,0,0,X,X,X,X,X,X,0,0,0,0,
0,0,0,0,0,0,0,0,0,X,X,X,X,X,X,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,X,X,X,X,X,X,0,0,0,
0,0,0,0,0,0,0,0,0,0,X,X,X,X,X,X,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,X,X,X,X,X,X,0,0,
0,0,0,0,0,0,0,0,0,0,0,X,X,X,X,X,X,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,X,X,X,X,0,0,0,
};
static byte LargeOrMask[] = {
B,B,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
B,I,B,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
B,I,I,B,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
B,I,I,I,B,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
B,I,I,I,I,B,0,0,0,0,0,0,0,0,0,0,0,0,0,
B,I,I,I,I,I,B,0,0,0,0,0,0,0,0,0,0,0,0,
B,I,I,I,I,I,I,B,0,0,0,0,0,0,0,0,0,0,0,
B,I,I,I,I,I,I,I,B,0,0,0,0,0,0,0,0,0,0,
B,I,I,I,I,I,I,I,I,B,0,0,0,0,0,0,0,0,0,
B,I,I,I,I,I,I,I,I,I,B,0,0,0,0,0,0,0,0,
B,I,I,I,I,I,I,I,I,I,I,B,0,0,0,0,0,0,0,
B,I,I,I,I,I,I,I,I,I,I,I,B,0,0,0,0,0,0,
B,I,I,I,I,I,I,I,I,I,I,I,I,B,0,0,0,0,0,
B,I,I,I,I,I,I,I,I,I,I,I,I,I,B,0,0,0,0,
B,I,I,I,I,I,I,I,I,I,I,I,I,I,I,B,0,0,0,
B,I,I,I,I,I,I,I,I,I,I,I,I,I,I,I,B,0,0,
B,I,I,I,I,I,I,I,I,I,I,I,I,I,I,I,I,B,0,
B,I,I,I,I,I,I,I,I,I,I,I,I,I,I,I,I,I,B,
B,I,I,I,I,I,I,I,I,I,I,B,B,B,B,B,B,B,B,
B,I,I,I,I,I,I,I,I,I,I,B,0,0,0,0,0,0,0,
B,I,I,I,I,I,B,I,I,I,I,B,0,0,0,0,0,0,0,
B,I,I,I,I,B,0,B,I,I,I,I,B,0,0,0,0,0,0,
B,I,I,I,B,0,0,B,I,I,I,I,B,0,0,0,0,0,0,
B,I,I,B,0,0,0,0,B,I,I,I,I,B,0,0,0,0,0,
B,I,B,0,0,0,0,0,B,I,I,I,I,B,0,0,0,0,0,
B,B,0,0,0,0,0,0,0,B,I,I,I,I,B,0,0,0,0,
0,0,0,0,0,0,0,0,0,B,I,I,I,I,B,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,B,I,I,I,I,B,0,0,0,
0,0,0,0,0,0,0,0,0,0,B,I,I,I,I,B,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,B,I,I,I,I,B,0,0,
0,0,0,0,0,0,0,0,0,0,0,B,I,I,I,I,B,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,B,B,B,B,0,0,0,
};
static byte SmallAndMask[] = {
X,X,0,0,0,0,0,0,0,0,
X,X,X,0,0,0,0,0,0,0,
X,X,X,X,0,0,0,0,0,0,
X,X,X,X,X,0,0,0,0,0,
X,X,X,X,X,X,0,0,0,0,
X,X,X,X,X,X,X,0,0,0,
X,X,X,X,X,X,X,X,0,0,
X,X,X,X,X,X,X,X,X,0,
X,X,X,X,X,X,X,X,X,X,
X,X,X,X,X,X,X,X,X,X,
X,X,X,X,X,X,X,0,0,0,
X,X,X,0,X,X,X,X,0,0,
X,X,0,0,X,X,X,X,0,0,
0,0,0,0,0,X,X,X,X,0,
0,0,0,0,0,X,X,X,X,0,
0,0,0,0,0,0,X,X,0,0,
};
static byte SmallOrMask[] = {
B,B,0,0,0,0,0,0,0,0,
B,I,B,0,0,0,0,0,0,0,
B,I,I,B,0,0,0,0,0,0,
B,I,I,I,B,0,0,0,0,0,
B,I,I,I,I,B,0,0,0,0,
B,I,I,I,I,I,B,0,0,0,
B,I,I,I,I,I,I,B,0,0,
B,I,I,I,I,I,I,I,B,0,
B,I,I,I,I,I,I,I,I,B,
B,I,I,I,I,I,B,B,B,B,
B,I,I,B,I,I,B,0,0,0,
B,I,B,0,B,I,I,B,0,0,
B,B,0,0,B,I,I,B,0,0,
0,0,0,0,0,B,I,I,B,0,
0,0,0,0,0,B,I,I,B,0,
0,0,0,0,0,0,B,B,0,0,
};
#undef X
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
#undef B
#undef I
static VGLBitmap VGLMouseLargeAndMask =
VGLBITMAP_INITIALIZER(MEMBUF, LARGE_MOUSE_IMG_XSIZE, LARGE_MOUSE_IMG_YSIZE,
LargeAndMask);
static VGLBitmap VGLMouseLargeOrMask =
VGLBITMAP_INITIALIZER(MEMBUF, LARGE_MOUSE_IMG_XSIZE, LARGE_MOUSE_IMG_YSIZE,
LargeOrMask);
static VGLBitmap VGLMouseSmallAndMask =
VGLBITMAP_INITIALIZER(MEMBUF, SMALL_MOUSE_IMG_XSIZE, SMALL_MOUSE_IMG_YSIZE,
SmallAndMask);
static VGLBitmap VGLMouseSmallOrMask =
VGLBITMAP_INITIALIZER(MEMBUF, SMALL_MOUSE_IMG_XSIZE, SMALL_MOUSE_IMG_YSIZE,
SmallOrMask);
static VGLBitmap *VGLMouseAndMask, *VGLMouseOrMask;
static int VGLMouseShown = VGL_MOUSEHIDE;
static int VGLMouseXpos = 0;
static int VGLMouseYpos = 0;
static int VGLMouseButtons = 0;
static volatile sig_atomic_t VGLMintpending;
static volatile sig_atomic_t VGLMsuppressint;
#define INTOFF() (VGLMsuppressint++)
#define INTON() do { \
if (--VGLMsuppressint == 0 && VGLMintpending) \
VGLMouseAction(0); \
} while (0)
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
int
__VGLMouseMode(int mode)
{
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
int oldmode;
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
INTOFF();
oldmode = VGLMouseShown;
if (mode == VGL_MOUSESHOW) {
if (VGLMouseShown == VGL_MOUSEHIDE) {
VGLMouseShown = VGL_MOUSESHOW;
__VGLBitmapCopy(&VGLVDisplay, VGLMouseXpos, VGLMouseYpos,
VGLDisplay, VGLMouseXpos, VGLMouseYpos,
VGLMouseAndMask->VXsize, -VGLMouseAndMask->VYsize);
}
}
else {
if (VGLMouseShown == VGL_MOUSESHOW) {
VGLMouseShown = VGL_MOUSEHIDE;
__VGLBitmapCopy(&VGLVDisplay, VGLMouseXpos, VGLMouseYpos,
VGLDisplay, VGLMouseXpos, VGLMouseYpos,
VGLMouseAndMask->VXsize, VGLMouseAndMask->VYsize);
}
}
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
INTON();
return oldmode;
}
void
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
VGLMouseMode(int mode)
{
__VGLMouseMode(mode);
}
static void
VGLMouseAction(int dummy)
{
struct mouse_info mouseinfo;
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
int mousemode;
if (VGLMsuppressint) {
VGLMintpending = 1;
return;
}
again:
INTOFF();
VGLMintpending = 0;
mouseinfo.operation = MOUSE_GETINFO;
ioctl(0, CONS_MOUSECTL, &mouseinfo);
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
if (VGLMouseXpos != mouseinfo.u.data.x ||
VGLMouseYpos != mouseinfo.u.data.y) {
mousemode = __VGLMouseMode(VGL_MOUSEHIDE);
VGLMouseXpos = mouseinfo.u.data.x;
VGLMouseYpos = mouseinfo.u.data.y;
__VGLMouseMode(mousemode);
}
VGLMouseButtons = mouseinfo.u.data.buttons;
/*
* Loop to handle any new (suppressed) signals. This is INTON() without
* recursion. !SA_RESTART prevents recursion in signal handling. So the
* maximum recursion is 2 levels.
*/
VGLMsuppressint = 0;
if (VGLMintpending)
goto again;
}
void
VGLMouseSetImage(VGLBitmap *AndMask, VGLBitmap *OrMask)
{
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
int mousemode;
mousemode = __VGLMouseMode(VGL_MOUSEHIDE);
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
VGLMouseAndMask = AndMask;
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
if (VGLMouseOrMask != NULL) {
free(VGLMouseOrMask->Bitmap);
free(VGLMouseOrMask);
}
VGLMouseOrMask = VGLBitmapCreate(MEMBUF, OrMask->VXsize, OrMask->VYsize, 0);
VGLBitmapAllocateBits(VGLMouseOrMask);
VGLBitmapCvt(OrMask, VGLMouseOrMask);
Refactor and simplify hiding the mouse cursor and fix bugs caused by complications in the previous methods. r346761 broke showing the mouse cursor after changing its state from off to on (including initially), since showing the cursor uses the state to decide whether to actually show and the state variable was not changed until after null showing. Moving the mouse or copying under the cursor fixed the problem. Fix this and similar problems for the on to off transition by changing the state variable before drawing the cursor. r346641 failed to turn off the mouse cursor on exit from vgl. It hid the cursor only temporarily for clearing. This doesn't change the state variable, so unhiding the cursor after clearing restored the cursor if its state was on. Fix this by changing its state to VGL_MOUSEHIDE using the application API for changing the state. Remove the VGLMouseVisible state variable and the extra states given by it. This was an optimization that was just an obfuscation in at least the previous version. Staticize VGLMouseAction(). Remove VGLMousePointerShow/Hide() except as internals in __VGLMouseMode(). __VGLMouseMouseMode() is the same as the application API VGLMouseMouseMode() except it returns the previous mode which callers need to know to restore it after hiding the cursor. Use the refactoring to make minor improvements in a simpler way than was possible: - in VGLMouseAction(), only hide and and unhide the mouse cursor if the mouse moved - in VGLClear(), only hide and and unhide the mouse cursor if the clearing method would otherwise clear the cursor.
2019-04-29 14:13:53 +00:00
__VGLMouseMode(mousemode);
}
void
VGLMouseSetStdImage()
{
if (VGLDisplay->VXsize > 800)
VGLMouseSetImage(&VGLMouseLargeAndMask, &VGLMouseLargeOrMask);
else
VGLMouseSetImage(&VGLMouseSmallAndMask, &VGLMouseSmallOrMask);
}
int
VGLMouseInit(int mode)
{
struct mouse_info mouseinfo;
VGLBitmap *ormask;
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
int andmask, border, error, i, interior;
Fix copying of bitmaps in depths > 8. This fix is complete, except different depths for the source and target are not supported. The bits for higher numbered planes (mostly for red) were either not copied or were copied to lower numbered planes for nearby pixels. Quick fix for creation of mouse cursor bitmaps in all depths. This fix is only complete for the default lightwhite cursor with a black frame. Even the lightwhite and black colors are hard to find. The templates use 0xff for lightwhite, but that means brightblue in the simplest mode (Truecolor depth 24). Other modes are even more complicated -- they are singly or doubly indirect throught palette(s) and changing of the palettes by applications is supported. Details: Replicate the template value for Truecolor modes to fill out the target depth (and more for depths not a multiple of 8). Do this for every drawing of the cursor so that it sort of works for mouse cursor bitmaps set by applications. Use 0xf for lightwhite in most other modes. Only do this for the default cursor so that it doesn't affect mouse cursor bitmaps set by applications. 0xf mostly works because it was originally for CGA lightwhite and is emulated using 1 or 2 indirections on EGA and VGA. 0x3f (EGA white) and 0xff (VGA black) direct palette indexes mostly don't work since backwards compatibility inhibits or prevents them representing lightwhite. But 0x3f (EGA white) must be used for mode 37 (VGA_MODEX) (320x240x8 V) since this mode is closer to EGA than VGA.
2019-03-27 08:02:55 +00:00
switch (VGLModeInfo.vi_mem_model) {
case V_INFO_MM_PACKED:
case V_INFO_MM_PLANAR:
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
andmask = 0x0f;
border = 0x0f;
interior = 0x04;
Fix copying of bitmaps in depths > 8. This fix is complete, except different depths for the source and target are not supported. The bits for higher numbered planes (mostly for red) were either not copied or were copied to lower numbered planes for nearby pixels. Quick fix for creation of mouse cursor bitmaps in all depths. This fix is only complete for the default lightwhite cursor with a black frame. Even the lightwhite and black colors are hard to find. The templates use 0xff for lightwhite, but that means brightblue in the simplest mode (Truecolor depth 24). Other modes are even more complicated -- they are singly or doubly indirect throught palette(s) and changing of the palettes by applications is supported. Details: Replicate the template value for Truecolor modes to fill out the target depth (and more for depths not a multiple of 8). Do this for every drawing of the cursor so that it sort of works for mouse cursor bitmaps set by applications. Use 0xf for lightwhite in most other modes. Only do this for the default cursor so that it doesn't affect mouse cursor bitmaps set by applications. 0xf mostly works because it was originally for CGA lightwhite and is emulated using 1 or 2 indirections on EGA and VGA. 0x3f (EGA white) and 0xff (VGA black) direct palette indexes mostly don't work since backwards compatibility inhibits or prevents them representing lightwhite. But 0x3f (EGA white) must be used for mode 37 (VGA_MODEX) (320x240x8 V) since this mode is closer to EGA than VGA.
2019-03-27 08:02:55 +00:00
break;
case V_INFO_MM_VGAX:
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
andmask = 0x3f;
border = 0x3f;
interior = 0x24;
Fix copying of bitmaps in depths > 8. This fix is complete, except different depths for the source and target are not supported. The bits for higher numbered planes (mostly for red) were either not copied or were copied to lower numbered planes for nearby pixels. Quick fix for creation of mouse cursor bitmaps in all depths. This fix is only complete for the default lightwhite cursor with a black frame. Even the lightwhite and black colors are hard to find. The templates use 0xff for lightwhite, but that means brightblue in the simplest mode (Truecolor depth 24). Other modes are even more complicated -- they are singly or doubly indirect throught palette(s) and changing of the palettes by applications is supported. Details: Replicate the template value for Truecolor modes to fill out the target depth (and more for depths not a multiple of 8). Do this for every drawing of the cursor so that it sort of works for mouse cursor bitmaps set by applications. Use 0xf for lightwhite in most other modes. Only do this for the default cursor so that it doesn't affect mouse cursor bitmaps set by applications. 0xf mostly works because it was originally for CGA lightwhite and is emulated using 1 or 2 indirections on EGA and VGA. 0x3f (EGA white) and 0xff (VGA black) direct palette indexes mostly don't work since backwards compatibility inhibits or prevents them representing lightwhite. But 0x3f (EGA white) must be used for mode 37 (VGA_MODEX) (320x240x8 V) since this mode is closer to EGA than VGA.
2019-03-27 08:02:55 +00:00
break;
default:
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
andmask = 0xff;
border = BORDER;
interior = INTERIOR;
Fix copying of bitmaps in depths > 8. This fix is complete, except different depths for the source and target are not supported. The bits for higher numbered planes (mostly for red) were either not copied or were copied to lower numbered planes for nearby pixels. Quick fix for creation of mouse cursor bitmaps in all depths. This fix is only complete for the default lightwhite cursor with a black frame. Even the lightwhite and black colors are hard to find. The templates use 0xff for lightwhite, but that means brightblue in the simplest mode (Truecolor depth 24). Other modes are even more complicated -- they are singly or doubly indirect throught palette(s) and changing of the palettes by applications is supported. Details: Replicate the template value for Truecolor modes to fill out the target depth (and more for depths not a multiple of 8). Do this for every drawing of the cursor so that it sort of works for mouse cursor bitmaps set by applications. Use 0xf for lightwhite in most other modes. Only do this for the default cursor so that it doesn't affect mouse cursor bitmaps set by applications. 0xf mostly works because it was originally for CGA lightwhite and is emulated using 1 or 2 indirections on EGA and VGA. 0x3f (EGA white) and 0xff (VGA black) direct palette indexes mostly don't work since backwards compatibility inhibits or prevents them representing lightwhite. But 0x3f (EGA white) must be used for mode 37 (VGA_MODEX) (320x240x8 V) since this mode is closer to EGA than VGA.
2019-03-27 08:02:55 +00:00
break;
}
Fix mouse cursor coloring in depths > 8 (previously, a hack that only worked right for white interiors and black borders was used). Advertise this by changing the default colors to a red interior and a white border (the same as the kernel default). Add undocumented env variables for changing these colors. Also change to the larger and better-shaped 16x10 cursor sometimes used in the kernel. The kernel choice is fancier, but libvgl is closer to supporting the larger cursors needed in newer modes. The (n)and-or logic for the cursor doesn't work right for more than 2 colors. The (n)and part only masks out all color bits for the pixel under the cursor when all bits are set in the And mask. With more complicated logic, the non-masked bits could be used to implement translucent cursors, but they actually just gave strange colors (especially in packed and planar modes where the bits are indirect through 1 or 2 palettes so it is hard to predict the final color). They also gave a bug for writing pixels under the cursor. The non-masked bits under the cursor were not combined in this case. Drop support for combining with bits under the cursor by making any nonzero value in the And mask mean all bits set. Convert the Or mask (which is represented as a half-initialized 256-color bitmap) to a fully initialized bitmap with the correct number of colors. The 256-color representation must be as in 3:3:2 direct mode iff the final bitmap has more than 256 colors. The conversion of colors is not very efficient, so convert at initialization time.
2019-04-22 19:31:16 +00:00
if (VGLModeInfo.vi_mode == M_BG640x480)
border = 0; /* XXX (palette makes 0x04 look like 0x0f) */
if (getenv("VGLMOUSEBORDERCOLOR") != NULL)
border = strtoul(getenv("VGLMOUSEBORDERCOLOR"), NULL, 0);
if (getenv("VGLMOUSEINTERIORCOLOR") != NULL)
interior = strtoul(getenv("VGLMOUSEINTERIORCOLOR"), NULL, 0);
ormask = &VGLMouseLargeOrMask;
for (i = 0; i < ormask->VXsize * ormask->VYsize; i++)
ormask->Bitmap[i] = ormask->Bitmap[i] == BORDER ? border :
ormask->Bitmap[i] == INTERIOR ? interior : 0;
ormask = &VGLMouseSmallOrMask;
for (i = 0; i < ormask->VXsize * ormask->VYsize; i++)
ormask->Bitmap[i] = ormask->Bitmap[i] == BORDER ? border :
ormask->Bitmap[i] == INTERIOR ? interior : 0;
VGLMouseSetStdImage();
mouseinfo.operation = MOUSE_MODE;
mouseinfo.u.mode.signal = SIGUSR2;
if ((error = ioctl(0, CONS_MOUSECTL, &mouseinfo)))
return error;
signal(SIGUSR2, VGLMouseAction);
mouseinfo.operation = MOUSE_GETINFO;
ioctl(0, CONS_MOUSECTL, &mouseinfo);
VGLMouseXpos = mouseinfo.u.data.x;
VGLMouseYpos = mouseinfo.u.data.y;
VGLMouseButtons = mouseinfo.u.data.buttons;
VGLMouseMode(mode);
return 0;
}
void
VGLMouseRestore(void)
{
struct mouse_info mouseinfo;
INTOFF();
mouseinfo.operation = MOUSE_GETINFO;
if (ioctl(0, CONS_MOUSECTL, &mouseinfo) == 0) {
mouseinfo.operation = MOUSE_MOVEABS;
mouseinfo.u.data.x = VGLMouseXpos;
mouseinfo.u.data.y = VGLMouseYpos;
ioctl(0, CONS_MOUSECTL, &mouseinfo);
}
INTON();
}
int
VGLMouseStatus(int *x, int *y, char *buttons)
{
INTOFF();
*x = VGLMouseXpos;
*y = VGLMouseYpos;
*buttons = VGLMouseButtons;
INTON();
return VGLMouseShown;
}
void
VGLMouseFreeze(void)
{
INTOFF();
}
int
VGLMouseFreezeXY(int x, int y)
{
INTOFF();
if (VGLMouseShown != VGL_MOUSESHOW)
return 0;
if (x >= VGLMouseXpos && x < VGLMouseXpos + VGLMouseAndMask->VXsize &&
y >= VGLMouseYpos && y < VGLMouseYpos + VGLMouseAndMask->VYsize &&
VGLMouseAndMask->Bitmap[(y-VGLMouseYpos)*VGLMouseAndMask->VXsize+
(x-VGLMouseXpos)])
return 1;
return 0;
}
int
VGLMouseOverlap(int x, int y, int width, int hight)
{
int overlap;
if (VGLMouseShown != VGL_MOUSESHOW)
return 0;
if (x > VGLMouseXpos)
overlap = (VGLMouseXpos + VGLMouseAndMask->VXsize) - x;
else
overlap = (x + width) - VGLMouseXpos;
if (overlap <= 0)
return 0;
if (y > VGLMouseYpos)
overlap = (VGLMouseYpos + VGLMouseAndMask->VYsize) - y;
else
overlap = (y + hight) - VGLMouseYpos;
return overlap > 0;
}
void
VGLMouseMerge(int x, int y, int width, byte *line)
{
int pos, x1, xend, xstart;
xstart = x;
if (xstart < VGLMouseXpos)
xstart = VGLMouseXpos;
xend = x + width;
if (xend > VGLMouseXpos + VGLMouseAndMask->VXsize)
xend = VGLMouseXpos + VGLMouseAndMask->VXsize;
for (x1 = xstart; x1 < xend; x1++) {
pos = (y - VGLMouseYpos) * VGLMouseAndMask->VXsize + x1 - VGLMouseXpos;
if (VGLMouseAndMask->Bitmap[pos])
bcopy(&VGLMouseOrMask->Bitmap[pos * VGLDisplay->PixelBytes],
&line[(x1 - x) * VGLDisplay->PixelBytes], VGLDisplay->PixelBytes);
}
}
void
VGLMouseUnFreeze()
{
INTON();
}