freebsd-skq/sys/kern/kern_uuid.c

368 lines
9.8 KiB
C
Raw Normal View History

/*-
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
* Copyright (c) 2002 Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
#include <sys/param.h>
#include <sys/endian.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sbuf.h>
#include <sys/socket.h>
#include <sys/sysproto.h>
#include <sys/systm.h>
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
#include <sys/uuid.h>
#include <sys/vimage.h>
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/vnet.h>
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
/*
* See also:
* http://www.opengroup.org/dce/info/draft-leach-uuids-guids-01.txt
* http://www.opengroup.org/onlinepubs/009629399/apdxa.htm
*
* Note that the generator state is itself an UUID, but the time and clock
* sequence fields are written in the native byte order.
*/
CTASSERT(sizeof(struct uuid) == 16);
/* We use an alternative, more convenient representation in the generator. */
struct uuid_private {
union {
uint64_t ll; /* internal. */
struct {
uint32_t low;
uint16_t mid;
uint16_t hi;
} x;
} time;
uint16_t seq; /* Big-endian. */
uint16_t node[UUID_NODE_LEN>>1];
};
CTASSERT(sizeof(struct uuid_private) == 16);
static struct uuid_private uuid_last;
static struct mtx uuid_mutex;
MTX_SYSINIT(uuid_lock, &uuid_mutex, "UUID generator mutex lock", MTX_DEF);
/*
* Return the first MAC address we encounter or, if none was found,
* construct a sufficiently random multicast address. We don't try
* to return the same MAC address as previously returned. We always
* generate a new multicast address if no MAC address exists in the
* system.
* It would be nice to know if 'ifnet' or any of its sub-structures
* has been changed in any way. If not, we could simply skip the
* scan and safely return the MAC address we returned before.
*/
static void
uuid_node(uint16_t *node)
{
INIT_VNET_NET(curvnet);
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
struct ifnet *ifp;
struct ifaddr *ifa;
struct sockaddr_dl *sdl;
int i;
2002-12-22 05:35:03 +00:00
IFNET_RLOCK();
TAILQ_FOREACH(ifp, &V_ifnet, if_link) {
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
/* Walk the address list */
IF_ADDR_LOCK(ifp);
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
TAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
sdl = (struct sockaddr_dl*)ifa->ifa_addr;
if (sdl != NULL && sdl->sdl_family == AF_LINK &&
sdl->sdl_type == IFT_ETHER) {
/* Got a MAC address. */
bcopy(LLADDR(sdl), node, UUID_NODE_LEN);
IF_ADDR_UNLOCK(ifp);
2002-12-22 05:35:03 +00:00
IFNET_RUNLOCK();
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
return;
}
}
IF_ADDR_UNLOCK(ifp);
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
}
2002-12-22 05:35:03 +00:00
IFNET_RUNLOCK();
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
for (i = 0; i < (UUID_NODE_LEN>>1); i++)
node[i] = (uint16_t)arc4random();
Fix generation of random multicast MAC address. In case no real/physical IEEE 802 address is available, both the expired "draft-leach-uuids-guids-01" (section "4. Node IDs when no IEEE 802 network card is available") and RFC 2518 (section "6.4.1 Node Field Generation Without the IEEE 802 Address") recommend (quoted from RFC 2518): "The ideal solution is to obtain a 47 bit cryptographic quality random number, and use it as the low 47 bits of the node ID, with the _most_ significant bit of the first octet of the node ID set to 1. This bit is the unicast/multicast bit, which will never be set in IEEE 802 addresses obtained from network cards; hence, there can never be a conflict between UUIDs generated by machines with and without network cards." Unfortunately, this incorrectly explains how to implement this and the FreeBSD UUID generator code inherited this generation bug from the broken reference code in the standards draft. They should instead specify the "_least_ significant bit of the first octet of the node ID" as the multicast bit in a memory and hexadecimal string representation of a 48-bit IEEE 802 MAC address. This standards bug arised from a false interpretation, as the multicast bit is actually the _most_ significant bit in IEEE 802.3 (Ethernet) _transmission order_ of an IEEE 802 MAC address. The standards authors forgot that the bitwise order of an _octet_ from a MAC address _memory_ and hexadecimal string representation is still always from left (MSB, bit 7) to right (LSB, bit 0). Fortunately, this UUID generation bug could have occurred on systems without any Ethernet NICs only.
2004-01-22 13:34:11 +00:00
*((uint8_t*)node) |= 0x01;
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
}
/*
* Get the current time as a 60 bit count of 100-nanosecond intervals
* since 00:00:00.00, October 15,1582. We apply a magic offset to convert
2007-04-23 12:53:00 +00:00
* the Unix time since 00:00:00.00, January 1, 1970 to the date of the
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
* Gregorian reform to the Christian calendar.
*/
static uint64_t
uuid_time(void)
{
struct bintime bt;
uint64_t time = 0x01B21DD213814000LL;
bintime(&bt);
time += (uint64_t)bt.sec * 10000000LL;
time += (10000000LL * (uint32_t)(bt.frac >> 32)) >> 32;
return (time & ((1LL << 60) - 1LL));
}
struct uuid *
kern_uuidgen(struct uuid *store, size_t count)
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
{
struct uuid_private uuid;
uint64_t time;
size_t n;
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
mtx_lock(&uuid_mutex);
uuid_node(uuid.node);
time = uuid_time();
if (uuid_last.time.ll == 0LL || uuid_last.node[0] != uuid.node[0] ||
uuid_last.node[1] != uuid.node[1] ||
uuid_last.node[2] != uuid.node[2])
uuid.seq = (uint16_t)arc4random() & 0x3fff;
else if (uuid_last.time.ll >= time)
uuid.seq = (uuid_last.seq + 1) & 0x3fff;
else
uuid.seq = uuid_last.seq;
uuid_last = uuid;
uuid_last.time.ll = (time + count - 1) & ((1LL << 60) - 1LL);
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
mtx_unlock(&uuid_mutex);
/* Set sequence and variant and deal with byte order. */
uuid.seq = htobe16(uuid.seq | 0x8000);
for (n = 0; n < count; n++) {
/* Set time and version (=1). */
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
uuid.time.x.low = (uint32_t)time;
uuid.time.x.mid = (uint16_t)(time >> 32);
uuid.time.x.hi = ((uint16_t)(time >> 48) & 0xfff) | (1 << 12);
store[n] = *(struct uuid *)&uuid;
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
time++;
}
return (store);
}
#ifndef _SYS_SYSPROTO_H_
struct uuidgen_args {
struct uuid *store;
int count;
};
#endif
int
uuidgen(struct thread *td, struct uuidgen_args *uap)
{
struct uuid *store;
size_t count;
int error;
/*
* Limit the number of UUIDs that can be created at the same time
* to some arbitrary number. This isn't really necessary, but I
* like to have some sort of upper-bound that's less than 2G :-)
* XXX probably needs to be tunable.
*/
if (uap->count < 1 || uap->count > 2048)
return (EINVAL);
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
count = uap->count;
store = malloc(count * sizeof(struct uuid), M_TEMP, M_WAITOK);
kern_uuidgen(store, count);
error = copyout(store, uap->store, count * sizeof(struct uuid));
free(store, M_TEMP);
Add uuidgen(2) and uuidgen(1). The uuidgen command, by means of the uuidgen syscall, generates one or more Universally Unique Identifiers compatible with OSF/DCE 1.1 version 1 UUIDs. From the Perforce logs (change 11995): Round of cleanups: o Give uuidgen() the correct prototype in syscalls.master o Define struct uuid according to DCE 1.1 in sys/uuid.h o Use struct uuid instead of uuid_t. The latter is defined in sys/uuid.h but should not be used in kernel land. o Add snprintf_uuid(), printf_uuid() and sbuf_printf_uuid() to kern_uuid.c for use in the kernel (currently geom_gpt.c). o Rename the non-standard struct uuid in kern/kern_uuid.c to struct uuid_private and give it a slightly better definition for better byte-order handling. See below. o In sys/gpt.h, fix the broken uuid definitions to match the now compliant struct uuid definition. See below. o In usr.bin/uuidgen/uuidgen.c catch up with struct uuid change. A note about byte-order: The standard failed to provide a non-conflicting and unambiguous definition for the binary representation. My initial implementation always wrote the timestamp as a 64-bit little-endian (2s-complement) integral. The clock sequence was always written as a 16-bit big-endian (2s-complement) integral. After a good nights sleep and couple of Pan Galactic Gargle Blasters (not necessarily in that order :-) I reread the spec and came to the conclusion that the time fields are always written in the native by order, provided the the low, mid and hi chopping still occurs. The spec mentions that you "might need to swap bytes if you talk to a machine that has a different byte-order". The clock sequence is always written in big-endian order (as is the IEEE 802 address) because its division is resulting in bytes, making the ordering unambiguous.
2002-05-28 06:16:08 +00:00
return (error);
}
int
snprintf_uuid(char *buf, size_t sz, struct uuid *uuid)
{
struct uuid_private *id;
int cnt;
id = (struct uuid_private *)uuid;
cnt = snprintf(buf, sz, "%08x-%04x-%04x-%04x-%04x%04x%04x",
id->time.x.low, id->time.x.mid, id->time.x.hi, be16toh(id->seq),
be16toh(id->node[0]), be16toh(id->node[1]), be16toh(id->node[2]));
return (cnt);
}
int
printf_uuid(struct uuid *uuid)
{
char buf[38];
snprintf_uuid(buf, sizeof(buf), uuid);
return (printf("%s", buf));
}
int
sbuf_printf_uuid(struct sbuf *sb, struct uuid *uuid)
{
char buf[38];
snprintf_uuid(buf, sizeof(buf), uuid);
return (sbuf_printf(sb, "%s", buf));
}
/*
* Encode/Decode UUID into byte-stream.
* http://www.opengroup.org/dce/info/draft-leach-uuids-guids-01.txt
*
* 0 1 2 3
* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | time_low |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | time_mid | time_hi_and_version |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |clk_seq_hi_res | clk_seq_low | node (0-1) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | node (2-5) |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
void
le_uuid_enc(void *buf, struct uuid const *uuid)
{
u_char *p;
int i;
p = buf;
le32enc(p, uuid->time_low);
le16enc(p + 4, uuid->time_mid);
le16enc(p + 6, uuid->time_hi_and_version);
p[8] = uuid->clock_seq_hi_and_reserved;
p[9] = uuid->clock_seq_low;
for (i = 0; i < _UUID_NODE_LEN; i++)
p[10 + i] = uuid->node[i];
}
void
le_uuid_dec(void const *buf, struct uuid *uuid)
{
u_char const *p;
int i;
p = buf;
uuid->time_low = le32dec(p);
uuid->time_mid = le16dec(p + 4);
uuid->time_hi_and_version = le16dec(p + 6);
uuid->clock_seq_hi_and_reserved = p[8];
uuid->clock_seq_low = p[9];
for (i = 0; i < _UUID_NODE_LEN; i++)
uuid->node[i] = p[10 + i];
}
2006-07-17 21:00:42 +00:00
void
be_uuid_enc(void *buf, struct uuid const *uuid)
{
u_char *p;
int i;
p = buf;
be32enc(p, uuid->time_low);
be16enc(p + 4, uuid->time_mid);
be16enc(p + 6, uuid->time_hi_and_version);
p[8] = uuid->clock_seq_hi_and_reserved;
p[9] = uuid->clock_seq_low;
for (i = 0; i < _UUID_NODE_LEN; i++)
p[10 + i] = uuid->node[i];
}
void
be_uuid_dec(void const *buf, struct uuid *uuid)
{
u_char const *p;
int i;
p = buf;
uuid->time_low = be32dec(p);
uuid->time_mid = le16dec(p + 4);
uuid->time_hi_and_version = be16dec(p + 6);
uuid->clock_seq_hi_and_reserved = p[8];
uuid->clock_seq_low = p[9];
for (i = 0; i < _UUID_NODE_LEN; i++)
uuid->node[i] = p[10 + i];
}
int
parse_uuid(const char *str, struct uuid *uuid)
{
u_int c[11];
int n;
/* An empty string represents a nil UUID. */
if (*str == '\0') {
bzero(uuid, sizeof(*uuid));
return (0);
}
/* The UUID string representation has a fixed length. */
if (strlen(str) != 36)
return (EINVAL);
/*
* We only work with "new" UUIDs. New UUIDs have the form:
* 01234567-89ab-cdef-0123-456789abcdef
* The so called "old" UUIDs, which we don't support, have the form:
* 0123456789ab.cd.ef.01.23.45.67.89.ab
*/
if (str[8] != '-')
return (EINVAL);
n = sscanf(str, "%8x-%4x-%4x-%2x%2x-%2x%2x%2x%2x%2x%2x", c + 0, c + 1,
c + 2, c + 3, c + 4, c + 5, c + 6, c + 7, c + 8, c + 9, c + 10);
/* Make sure we have all conversions. */
if (n != 11)
return (EINVAL);
/* Successful scan. Build the UUID. */
uuid->time_low = c[0];
uuid->time_mid = c[1];
uuid->time_hi_and_version = c[2];
uuid->clock_seq_hi_and_reserved = c[3];
uuid->clock_seq_low = c[4];
for (n = 0; n < 6; n++)
uuid->node[n] = c[n + 5];
/* Check semantics... */
return (((c[3] & 0x80) != 0x00 && /* variant 0? */
(c[3] & 0xc0) != 0x80 && /* variant 1? */
(c[3] & 0xe0) != 0xc0) ? EINVAL : 0); /* variant 2? */
}