freebsd-skq/sys/alpha/linux/linux.h

765 lines
21 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1994-1996 S<EFBFBD>ren Schmidt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
1999-08-28 01:08:13 +00:00
* $FreeBSD$
*/
#ifndef _I386_LINUX_LINUX_H_
#define _I386_LINUX_LINUX_H_
1996-10-15 19:22:46 +00:00
#include <i386/linux/linux_syscall.h>
typedef unsigned short linux_uid_t;
typedef unsigned short linux_gid_t;
typedef unsigned short linux_dev_t;
typedef unsigned long linux_ino_t;
typedef unsigned short linux_mode_t;
typedef unsigned short linux_nlink_t;
typedef long linux_time_t;
typedef long linux_clock_t;
typedef char * linux_caddr_t;
typedef long linux_off_t;
typedef struct {
long val[2];
} linux_fsid_t;
typedef int linux_pid_t;
typedef int linux_key_t;
1999-11-30 15:02:28 +00:00
typedef unsigned int linux_size_t;
/*
* Signal stuff...
*/
typedef void (*linux_handler_t)(int);
typedef unsigned long linux_osigset_t;
typedef struct {
unsigned int __bits[2];
} linux_sigset_t;
typedef struct {
void (*lsa_handler)(int);
linux_osigset_t lsa_mask;
unsigned long lsa_flags;
void (*lsa_restorer)(void);
} linux_osigaction_t;
typedef struct {
void (*lsa_handler)(int);
unsigned long lsa_flags;
void (*lsa_restorer)(void);
linux_sigset_t lsa_mask;
} linux_sigaction_t;
1999-11-30 15:02:28 +00:00
typedef struct
{
void *ss_sp;
int ss_flags;
linux_size_t ss_size;
} linux_stack_t;
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
/*
* The Linux sigcontext, pretty much a standard 386 trapframe.
*/
struct linux_sigcontext {
int sc_gs;
int sc_fs;
int sc_es;
int sc_ds;
int sc_edi;
int sc_esi;
int sc_ebp;
int sc_esp;
int sc_ebx;
int sc_edx;
int sc_ecx;
int sc_eax;
int sc_trapno;
int sc_err;
int sc_eip;
int sc_cs;
int sc_eflags;
int sc_esp_at_signal;
int sc_ss;
int sc_387;
int sc_mask;
int sc_cr2;
};
/*
* We make the stack look like Linux expects it when calling a signal
* handler, but use the BSD way of calling the handler and sigreturn().
* This means that we need to pass the pointer to the handler too.
* It is appended to the frame to not interfere with the rest of it.
*/
struct linux_sigframe {
int sf_sig;
struct linux_sigcontext sf_sc;
void (*sf_handler)(int);
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
};
extern int bsd_to_linux_signal[];
extern int linux_to_bsd_signal[];
/* signal numbers */
#define LINUX_SIGHUP 1
#define LINUX_SIGINT 2
#define LINUX_SIGQUIT 3
#define LINUX_SIGILL 4
#define LINUX_SIGTRAP 5
#define LINUX_SIGABRT 6
#define LINUX_SIGIOT 6
#define LINUX_SIGBUS 7
#define LINUX_SIGFPE 8
#define LINUX_SIGKILL 9
#define LINUX_SIGUSR1 10
#define LINUX_SIGSEGV 11
#define LINUX_SIGUSR2 12
#define LINUX_SIGPIPE 13
#define LINUX_SIGALRM 14
#define LINUX_SIGTERM 15
#define LINUX_SIGSTKFLT 16
#define LINUX_SIGCHLD 17
#define LINUX_SIGCONT 18
#define LINUX_SIGSTOP 19
#define LINUX_SIGTSTP 20
#define LINUX_SIGTTIN 21
#define LINUX_SIGTTOU 22
#define LINUX_SIGURG 23
#define LINUX_SIGXCPU 24
#define LINUX_SIGXFSZ 25
#define LINUX_SIGVTALRM 26
#define LINUX_SIGPROF 27
#define LINUX_SIGWINCH 28
#define LINUX_SIGIO 29
#define LINUX_SIGPOLL LINUX_SIGIO
#define LINUX_SIGPWR 30
#define LINUX_SIGUNUSED 31
#define LINUX_NSIG 64
#define LINUX_SIGTBLSZ 31
/* sigaction flags */
#define LINUX_SA_NOCLDSTOP 0x00000001
#define LINUX_SA_NOCLDWAIT 0x00000002
#define LINUX_SA_SIGINFO 0x00000004
#define LINUX_SA_RESTORER 0x04000000
#define LINUX_SA_ONSTACK 0x08000000
#define LINUX_SA_RESTART 0x10000000
#define LINUX_SA_INTERRUPT 0x20000000
#define LINUX_SA_NOMASK 0x40000000
#define LINUX_SA_ONESHOT 0x80000000
/* sigprocmask actions */
#define LINUX_SIG_BLOCK 0
#define LINUX_SIG_UNBLOCK 1
#define LINUX_SIG_SETMASK 2
#define LINUX_SIGEMPTYSET(set) (set).__bits[0] = (set).__bits[1] = 0
#define LINUX_SIGISMEMBER(set, sig) SIGISMEMBER(set, sig)
#define LINUX_SIGADDSET(set, sig) SIGADDSET(set, sig)
extern char linux_sigcode[];
extern int linux_szsigcode;
extern const char linux_emul_path[];
extern struct sysent linux_sysent[LINUX_SYS_MAXSYSCALL];
extern struct sysentvec linux_sysvec;
extern struct sysentvec elf_linux_sysvec;
/* dummy struct definitions */
struct image_params;
struct trapframe;
#define LINUX_MAX_UTSNAME 65
struct linux_new_utsname {
char sysname[LINUX_MAX_UTSNAME];
char nodename[LINUX_MAX_UTSNAME];
char release[LINUX_MAX_UTSNAME];
char version[LINUX_MAX_UTSNAME];
char machine[LINUX_MAX_UTSNAME];
char domainname[LINUX_MAX_UTSNAME];
};
/* misc defines */
#define LINUX_NAME_MAX 255
/* resource limits */
#define LINUX_RLIMIT_CPU 0
#define LINUX_RLIMIT_FSIZE 1
#define LINUX_RLIMIT_DATA 2
#define LINUX_RLIMIT_STACK 3
#define LINUX_RLIMIT_CORE 4
#define LINUX_RLIMIT_RSS 5
#define LINUX_RLIMIT_NPROC 6
#define LINUX_RLIMIT_NOFILE 7
#define LINUX_RLIMIT_MEMLOCK 8
#define LINUX_RLIMIT_AS 9 /* address space limit */
#define LINUX_RLIM_NLIMITS 10
/* keyboard defines */
#define LINUX_KIOCSOUND 0x4B2F
#define LINUX_KDMKTONE 0x4B30
#define LINUX_KDGETLED 0x4B31
#define LINUX_KDSETLED 0x4B32
#define LINUX_LED_SCR 0x01
#define LINUX_LED_NUM 0x02
#define LINUX_LED_CAP 0x04
#define LINUX_KDGKBMODE 0x4B44
#define LINUX_KDSKBMODE 0x4B45
#define LINUX_KDSETMODE 0x4B3A
#define LINUX_KDGETMODE 0x4B3B
#define LINUX_KD_TEXT 0x0
#define LINUX_KD_GRAPHICS 0x1
#define LINUX_KD_TEXT0 0x2
#define LINUX_KD_TEXT1 0x3
#define LINUX_KBD_RAW 0
#define LINUX_KBD_XLATE 1
#define LINUX_KBD_MEDIUMRAW 2
/* termio commands */
#define LINUX_TCGETS 0x5401
#define LINUX_TCSETS 0x5402
#define LINUX_TCSETSW 0x5403
#define LINUX_TCSETSF 0x5404
#define LINUX_TCGETA 0x5405
#define LINUX_TCSETA 0x5406
#define LINUX_TCSETAW 0x5407
#define LINUX_TCSETAF 0x5408
#define LINUX_TCSBRK 0x5409
#define LINUX_TCXONC 0x540A
#define LINUX_TCFLSH 0x540B
#define LINUX_TIOCEXCL 0x540C
#define LINUX_TIOCNXCL 0x540D
#define LINUX_TIOCSCTTY 0x540E
#define LINUX_TIOCGPGRP 0x540F
#define LINUX_TIOCSPGRP 0x5410
#define LINUX_TIOCOUTQ 0x5411
#define LINUX_TIOCSTI 0x5412
#define LINUX_TIOCGWINSZ 0x5413
#define LINUX_TIOCSWINSZ 0x5414
#define LINUX_TIOCMGET 0x5415
#define LINUX_TIOCMBIS 0x5416
#define LINUX_TIOCMBIC 0x5417
#define LINUX_TIOCMSET 0x5418
#define LINUX_TIOCGSOFTCAR 0x5419
#define LINUX_TIOCSSOFTCAR 0x541A
#define LINUX_FIONREAD 0x541B
#define LINUX_TIOCINQ FIONREAD
#define LINUX_TIOCLINUX 0x541C
#define LINUX_TIOCCONS 0x541D
#define LINUX_TIOCGSERIAL 0x541E
#define LINUX_TIOCSSERIAL 0x541F
#define LINUX_TIOCPKT 0x5420
#define LINUX_FIONBIO 0x5421
#define LINUX_TIOCNOTTY 0x5422
#define LINUX_TIOCSETD 0x5423
#define LINUX_TIOCGETD 0x5424
#define LINUX_TCSBRKP 0x5425
#define LINUX_TIOCTTYGSTRUCT 0x5426
#define LINUX_FIONCLEX 0x5450
#define LINUX_FIOCLEX 0x5451
#define LINUX_FIOASYNC 0x5452
#define LINUX_TIOCSERCONFIG 0x5453
#define LINUX_TIOCSERGWILD 0x5454
#define LINUX_TIOCSERSWILD 0x5455
#define LINUX_TIOCGLCKTRMIOS 0x5456
#define LINUX_TIOCSLCKTRMIOS 0x5457
#define LINUX_VT_OPENQRY 0x5600
#define LINUX_VT_GETMODE 0x5601
#define LINUX_VT_SETMODE 0x5602
#define LINUX_VT_GETSTATE 0x5603
#define LINUX_VT_RELDISP 0x5605
#define LINUX_VT_ACTIVATE 0x5606
#define LINUX_VT_WAITACTIVE 0x5607
/* arguments for tcflow() and LINUX_TCXONC */
#define LINUX_TCOOFF 0
#define LINUX_TCOON 1
#define LINUX_TCIOFF 2
#define LINUX_TCION 3
/* arguments for tcflush() and LINUX_TCFLSH */
#define LINUX_TCIFLUSH 0
#define LINUX_TCOFLUSH 1
#define LINUX_TCIOFLUSH 2
/* line disciplines */
#define LINUX_N_TTY 0
#define LINUX_N_SLIP 1
#define LINUX_N_MOUSE 2
#define LINUX_N_PPP 3
/* Linux termio c_cc values */
#define LINUX_VINTR 0
#define LINUX_VQUIT 1
#define LINUX_VERASE 2
#define LINUX_VKILL 3
#define LINUX_VEOF 4
#define LINUX_VTIME 5
#define LINUX_VMIN 6
#define LINUX_VSWTC 7
#define LINUX_NCC 8
/* Linux termios c_cc values */
#define LINUX_VSTART 8
#define LINUX_VSTOP 9
#define LINUX_VSUSP 10
#define LINUX_VEOL 11
#define LINUX_VREPRINT 12
#define LINUX_VDISCARD 13
#define LINUX_VWERASE 14
#define LINUX_VLNEXT 15
#define LINUX_VEOL2 16
#define LINUX_NCCS 19
#define LINUX_POSIX_VDISABLE '\0'
/* Linux c_iflag masks */
#define LINUX_IGNBRK 0x0000001
#define LINUX_BRKINT 0x0000002
#define LINUX_IGNPAR 0x0000004
#define LINUX_PARMRK 0x0000008
#define LINUX_INPCK 0x0000010
#define LINUX_ISTRIP 0x0000020
#define LINUX_INLCR 0x0000040
#define LINUX_IGNCR 0x0000080
#define LINUX_ICRNL 0x0000100
#define LINUX_IUCLC 0x0000200
#define LINUX_IXON 0x0000400
#define LINUX_IXANY 0x0000800
#define LINUX_IXOFF 0x0001000
#define LINUX_IMAXBEL 0x0002000
/* Linux c_oflag masks */
#define LINUX_OPOST 0x0000001
#define LINUX_OLCUC 0x0000002
#define LINUX_ONLCR 0x0000004
#define LINUX_OCRNL 0x0000008
#define LINUX_ONOCR 0x0000010
#define LINUX_ONLRET 0x0000020
#define LINUX_OFILL 0x0000040
#define LINUX_OFDEL 0x0000080
#define LINUX_NLDLY 0x0000100
#define LINUX_NL0 0x0000000
#define LINUX_NL1 0x0000100
#define LINUX_CRDLY 0x0000600
#define LINUX_CR0 0x0000000
#define LINUX_CR1 0x0000200
#define LINUX_CR2 0x0000400
#define LINUX_CR3 0x0000600
#define LINUX_TABDLY 0x0001800
#define LINUX_TAB0 0x0000000
#define LINUX_TAB1 0x0000800
#define LINUX_TAB2 0x0001000
#define LINUX_TAB3 0x0001800
#define LINUX_XTABS 0x0001800
#define LINUX_BSDLY 0x0002000
#define LINUX_BS0 0x0000000
#define LINUX_BS1 0x0002000
#define LINUX_VTDLY 0x0004000
#define LINUX_VT0 0x0000000
#define LINUX_VT1 0x0004000
#define LINUX_FFDLY 0x0008000
#define LINUX_FF0 0x0000000
#define LINUX_FF1 0x0008000
#define LINUX_CBAUD 0x0000100f
#define LINUX_B0 0x00000000
#define LINUX_B50 0x00000001
#define LINUX_B75 0x00000002
#define LINUX_B110 0x00000003
#define LINUX_B134 0x00000004
#define LINUX_B150 0x00000005
#define LINUX_B200 0x00000006
#define LINUX_B300 0x00000007
#define LINUX_B600 0x00000008
#define LINUX_B1200 0x00000009
#define LINUX_B1800 0x0000000a
#define LINUX_B2400 0x0000000b
#define LINUX_B4800 0x0000000c
#define LINUX_B9600 0x0000000d
#define LINUX_B19200 0x0000000e
#define LINUX_B38400 0x0000000f
#define LINUX_EXTA LINUX_B19200
#define LINUX_EXTB LINUX_B38400
#define LINUX_CBAUDEX 0x00001000
#define LINUX_B57600 0x00001001
#define LINUX_B115200 0x00001002
#define LINUX_CSIZE 0x00000030
#define LINUX_CS5 0x00000000
#define LINUX_CS6 0x00000010
#define LINUX_CS7 0x00000020
#define LINUX_CS8 0x00000030
#define LINUX_CSTOPB 0x00000040
#define LINUX_CREAD 0x00000080
#define LINUX_PARENB 0x00000100
#define LINUX_PARODD 0x00000200
#define LINUX_HUPCL 0x00000400
#define LINUX_CLOCAL 0x00000800
#define LINUX_CRTSCTS 0x80000000
/* Linux c_lflag masks */
#define LINUX_ISIG 0x00000001
#define LINUX_ICANON 0x00000002
#define LINUX_XCASE 0x00000004
#define LINUX_ECHO 0x00000008
#define LINUX_ECHOE 0x00000010
#define LINUX_ECHOK 0x00000020
#define LINUX_ECHONL 0x00000040
#define LINUX_NOFLSH 0x00000080
#define LINUX_TOSTOP 0x00000100
#define LINUX_ECHOCTL 0x00000200
#define LINUX_ECHOPRT 0x00000400
#define LINUX_ECHOKE 0x00000800
#define LINUX_FLUSHO 0x00001000
#define LINUX_PENDIN 0x00002000
#define LINUX_IEXTEN 0x00008000
/* open/fcntl flags */
#define LINUX_O_RDONLY 00
#define LINUX_O_WRONLY 01
#define LINUX_O_RDWR 02
#define LINUX_O_CREAT 0100
#define LINUX_O_EXCL 0200
#define LINUX_O_NOCTTY 0400
#define LINUX_O_TRUNC 01000
#define LINUX_O_APPEND 02000
#define LINUX_O_NONBLOCK 04000
#define LINUX_O_NDELAY LINUX_O_NONBLOCK
#define LINUX_O_SYNC 010000
#define LINUX_FASYNC 020000
/* fcntl flags */
#define LINUX_F_DUPFD 0
#define LINUX_F_GETFD 1
#define LINUX_F_SETFD 2
#define LINUX_F_GETFL 3
#define LINUX_F_SETFL 4
#define LINUX_F_GETLK 5
#define LINUX_F_SETLK 6
#define LINUX_F_SETLKW 7
#define LINUX_F_SETOWN 8
#define LINUX_F_GETOWN 9
#define LINUX_F_RDLCK 0
#define LINUX_F_WRLCK 1
#define LINUX_F_UNLCK 2
/* mmap options */
#define LINUX_MAP_SHARED 0x0001
#define LINUX_MAP_PRIVATE 0x0002
#define LINUX_MAP_FIXED 0x0010
#define LINUX_MAP_ANON 0x0020
#define LINUX_MAP_GROWSDOWN 0x0100
/* SystemV ipc defines */
#define LINUX_SEMOP 1
#define LINUX_SEMGET 2
#define LINUX_SEMCTL 3
#define LINUX_MSGSND 11
#define LINUX_MSGRCV 12
#define LINUX_MSGGET 13
#define LINUX_MSGCTL 14
#define LINUX_SHMAT 21
#define LINUX_SHMDT 22
#define LINUX_SHMGET 23
#define LINUX_SHMCTL 24
#define LINUX_IPC_RMID 0
#define LINUX_IPC_SET 1
#define LINUX_IPC_STAT 2
#define LINUX_IPC_INFO 3
#define LINUX_SHM_LOCK 11
#define LINUX_SHM_UNLOCK 12
#define LINUX_SHM_STAT 13
#define LINUX_SHM_INFO 14
#define LINUX_SHM_RDONLY 0x1000
#define LINUX_SHM_RND 0x2000
#define LINUX_SHM_REMAP 0x4000
/* semctl Command Definitions. */
#define LINUX_GETPID 11
#define LINUX_GETVAL 12
#define LINUX_GETALL 13
#define LINUX_GETNCNT 14
#define LINUX_GETZCNT 15
#define LINUX_SETVAL 16
#define LINUX_SETALL 17
/* Socket defines */
#define LINUX_SOCKET 1
#define LINUX_BIND 2
#define LINUX_CONNECT 3
#define LINUX_LISTEN 4
#define LINUX_ACCEPT 5
#define LINUX_GETSOCKNAME 6
#define LINUX_GETPEERNAME 7
#define LINUX_SOCKETPAIR 8
#define LINUX_SEND 9
#define LINUX_RECV 10
#define LINUX_SENDTO 11
#define LINUX_RECVFROM 12
#define LINUX_SHUTDOWN 13
#define LINUX_SETSOCKOPT 14
#define LINUX_GETSOCKOPT 15
#define LINUX_SENDMSG 16
#define LINUX_RECVMSG 17
#define LINUX_AF_UNSPEC 0
#define LINUX_AF_UNIX 1
#define LINUX_AF_INET 2
#define LINUX_AF_AX25 3
#define LINUX_AF_IPX 4
#define LINUX_AF_APPLETALK 5
#define LINUX_SOL_SOCKET 1
#define LINUX_SOL_IP 0
#define LINUX_SOL_IPX 256
#define LINUX_SOL_AX25 257
#define LINUX_SOL_TCP 6
#define LINUX_SOL_UDP 17
#define LINUX_SO_DEBUG 1
#define LINUX_SO_REUSEADDR 2
#define LINUX_SO_TYPE 3
#define LINUX_SO_ERROR 4
#define LINUX_SO_DONTROUTE 5
#define LINUX_SO_BROADCAST 6
#define LINUX_SO_SNDBUF 7
#define LINUX_SO_RCVBUF 8
#define LINUX_SO_KEEPALIVE 9
#define LINUX_SO_OOBINLINE 10
#define LINUX_SO_NO_CHECK 11
#define LINUX_SO_PRIORITY 12
#define LINUX_SO_LINGER 13
#define LINUX_IP_TOS 1
#define LINUX_IP_TTL 2
#define LINUX_IP_HDRINCL 3
#define LINUX_IP_OPTIONS 4
#define LINUX_IP_MULTICAST_IF 32
#define LINUX_IP_MULTICAST_TTL 33
#define LINUX_IP_MULTICAST_LOOP 34
#define LINUX_IP_ADD_MEMBERSHIP 35
#define LINUX_IP_DROP_MEMBERSHIP 36
/* Sound system defines */
#define LINUX_SNDCTL_SEQ_RESET 0x5100
#define LINUX_SNDCTL_SEQ_SYNC 0x5101
#define LINUX_SNDCTL_SYNTH_INFO 0x5102
#define LINUX_SNDCTL_SEQ_CTRLRATE 0x5103
#define LINUX_SNDCTL_SEQ_GETOUTCOUNT 0x5104
#define LINUX_SNDCTL_SEQ_GETINCOUNT 0x5105
#define LINUX_SNDCTL_SEQ_PERCMODE 0x5106
#define LINUX_SNDCTL_FM_LOAD_INSTR 0x5107
#define LINUX_SNDCTL_SEQ_TESTMIDI 0x5108
#define LINUX_SNDCTL_SEQ_RESETSAMPLES 0x5109
#define LINUX_SNDCTL_SEQ_NRSYNTHS 0x510A
#define LINUX_SNDCTL_SEQ_NRMIDIS 0x510B
#define LINUX_SNDCTL_MIDI_INFO 0x510C
#define LINUX_SNDCTL_SEQ_TRESHOLD 0x510D
#define LINUX_SNDCTL_SYNTH_MEMAVL 0x510E
#define LINUX_SNDCTL_DSP_RESET 0x5000
#define LINUX_SNDCTL_DSP_SYNC 0x5001
#define LINUX_SNDCTL_DSP_SPEED 0x5002
#define LINUX_SNDCTL_DSP_STEREO 0x5003
#define LINUX_SNDCTL_DSP_GETBLKSIZE 0x5004
#define LINUX_SNDCTL_DSP_SETBLKSIZE 0x5004
#define LINUX_SNDCTL_DSP_SETFMT 0x5005
#define LINUX_SOUND_PCM_WRITE_CHANNELS 0x5006
#define LINUX_SOUND_PCM_WRITE_FILTER 0x5007
#define LINUX_SNDCTL_DSP_POST 0x5008
#define LINUX_SNDCTL_DSP_SUBDIVIDE 0x5009
#define LINUX_SNDCTL_DSP_SETFRAGMENT 0x500A
#define LINUX_SNDCTL_DSP_GETFMTS 0x500B
#define LINUX_SNDCTL_DSP_GETOSPACE 0x500C
#define LINUX_SNDCTL_DSP_GETISPACE 0x500D
#define LINUX_SNDCTL_DSP_NONBLOCK 0x500E
#define LINUX_SNDCTL_DSP_GETCAPS 0x500F
#define LINUX_SNDCTL_DSP_GETTRIGGER 0x5010
#define LINUX_SNDCTL_DSP_SETTRIGGER 0x5010
#define LINUX_SNDCTL_DSP_GETIPTR 0x5011
#define LINUX_SNDCTL_DSP_GETOPTR 0x5012
#define LINUX_SNDCTL_DSP_GETODELAY 0x5017
#define LINUX_SOUND_MIXER_WRITE_VOLUME 0x4d00
#define LINUX_SOUND_MIXER_WRITE_BASS 0x4d01
#define LINUX_SOUND_MIXER_WRITE_TREBLE 0x4d02
#define LINUX_SOUND_MIXER_WRITE_SYNTH 0x4d03
#define LINUX_SOUND_MIXER_WRITE_PCM 0x4d04
#define LINUX_SOUND_MIXER_WRITE_SPEAKER 0x4d05
#define LINUX_SOUND_MIXER_WRITE_LINE 0x4d06
#define LINUX_SOUND_MIXER_WRITE_MIC 0x4d07
#define LINUX_SOUND_MIXER_WRITE_CD 0x4d08
#define LINUX_SOUND_MIXER_WRITE_IMIX 0x4d09
#define LINUX_SOUND_MIXER_WRITE_ALTPCM 0x4d0A
#define LINUX_SOUND_MIXER_WRITE_RECLEV 0x4d0B
#define LINUX_SOUND_MIXER_WRITE_IGAIN 0x4d0C
#define LINUX_SOUND_MIXER_WRITE_OGAIN 0x4d0D
#define LINUX_SOUND_MIXER_WRITE_LINE1 0x4d0E
#define LINUX_SOUND_MIXER_WRITE_LINE2 0x4d0F
#define LINUX_SOUND_MIXER_WRITE_LINE3 0x4d10
#define LINUX_SOUND_MIXER_READ_DEVMASK 0x4dfe
#define LINUX_OSS_GETVERSION 0x4d76
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
/* Socket system defines */
#define LINUX_FIOSETOWN 0x8901
#define LINUX_SIOCSPGRP 0x8902
#define LINUX_FIOGETOWN 0x8903
#define LINUX_SIOCGPGRP 0x8904
#define LINUX_SIOCATMARK 0x8905
#define LINUX_SIOCGSTAMP 0x8906
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
#define LINUX_SIOCGIFCONF 0x8912
#define LINUX_SIOCGIFFLAGS 0x8913
#define LINUX_SIOCGIFADDR 0x8915
#define LINUX_SIOCGIFDSTADDR 0x8917
#define LINUX_SIOCGIFBRDADDR 0x8919
#define LINUX_SIOCGIFNETMASK 0x891b
#define LINUX_SIOCGIFHWADDR 0x8927
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
#define LINUX_SIOCADDMULTI 0x8931
#define LINUX_SIOCDELMULTI 0x8932
struct linux_sockaddr
{
unsigned short sa_family;
char sa_data[14];
};
struct linux_ifmap
{
unsigned long mem_start;
unsigned long mem_end;
unsigned short base_addr;
unsigned char irq;
unsigned char dma;
unsigned char port;
};
struct linux_ifreq
{
#define LINUX_IFHWADDRLEN 6
#define LINUX_IFNAMSIZ 16
union
{
char ifrn_name[LINUX_IFNAMSIZ]; /* if name, e.g. "en0" */
} ifr_ifrn;
union {
struct linux_sockaddr ifru_addr;
struct linux_sockaddr ifru_dstaddr;
struct linux_sockaddr ifru_broadaddr;
struct linux_sockaddr ifru_netmask;
struct linux_sockaddr ifru_hwaddr;
short ifru_flags;
int ifru_metric;
int ifru_mtu;
struct linux_ifmap ifru_map;
char ifru_slave[LINUX_IFNAMSIZ]; /* Just fits the size */
caddr_t ifru_data;
} ifr_ifru;
};
#define ifr_name ifr_ifrn.ifrn_name /* interface name */
#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
/* serial_struct values for TIOC[GS]SERIAL ioctls */
#define LINUX_ASYNC_CLOSING_WAIT_INF 0
#define LINUX_ASYNC_CLOSING_WAIT_NONE 65535
#define LINUX_PORT_UNKNOWN 0
#define LINUX_PORT_8250 1
#define LINUX_PORT_16450 2
#define LINUX_PORT_16550 3
#define LINUX_PORT_16550A 4
#define LINUX_PORT_CIRRUS 5
#define LINUX_PORT_16650 6
#define LINUX_PORT_MAX 6
#define LINUX_ASYNC_HUP_NOTIFY 0x0001
#define LINUX_ASYNC_FOURPORT 0x0002
#define LINUX_ASYNC_SAK 0x0004
#define LINUX_ASYNC_SPLIT_TERMIOS 0x0008
#define LINUX_ASYNC_SPD_MASK 0x0030
#define LINUX_ASYNC_SPD_HI 0x0010
#define LINUX_ASYNC_SPD_VHI 0x0020
#define LINUX_ASYNC_SPD_CUST 0x0030
#define LINUX_ASYNC_SKIP_TEST 0x0040
#define LINUX_ASYNC_AUTO_IRQ 0x0080
#define LINUX_ASYNC_SESSION_LOCKOUT 0x0100
#define LINUX_ASYNC_PGRP_LOCKOUT 0x0200
#define LINUX_ASYNC_CALLOUT_NOHUP 0x0400
#define LINUX_ASYNC_FLAGS 0x0FFF
/* cdrom */
#define LINUX_CDROMPAUSE 0x5301
#define LINUX_CDROMRESUME 0x5302
#define LINUX_CDROMPLAYMSF 0x5303
#define LINUX_CDROMPLAYTRKIND 0x5304
#define LINUX_CDROMREADTOCHDR 0x5305
#define LINUX_CDROMREADTOCENTRY 0x5306
#define LINUX_CDROMSTOP 0x5307
#define LINUX_CDROMSTART 0x5308
#define LINUX_CDROMEJECT 0x5309
#define LINUX_CDROMVOLCTRL 0x530a
#define LINUX_CDROMSUBCHNL 0x530b
#define LINUX_CDROMREADMODE2 0x530c
#define LINUX_CDROMREADMODE1 0x530d
#define LINUX_CDROMREADAUDIO 0x530e
#define LINUX_CDROMEJECT_SW 0x530f
#define LINUX_CDROMMULTISESSION 0x5310
#define LINUX_CDROM_GET_UPC 0x5311
#define LINUX_CDROMRESET 0x5312
#define LINUX_CDROMVOLREAD 0x5313
#define LINUX_CDROMREADRAW 0x5314
#define LINUX_CDROMREADCOOKED 0x5315
#define LINUX_CDROMSEEK 0x5316
#define LINUX_CDROMPLAYBLK 0x5317
#define LINUX_CDROMREADALL 0x5318
#define LINUX_CDROMCLOSETRAY 0x5319
#define LINUX_CDROMLOADFROMSLOT 0x531a
#define LINUX_CDROM_LBA 0x01
#define LINUX_CDROM_MSF 0x02
/* Scheduling policies */
#define LINUX_SCHED_OTHER 0
#define LINUX_SCHED_FIFO 1
#define LINUX_SCHED_RR 2
#endif /* !_I386_LINUX_LINUX_H_ */