d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e476ebf3d5
freebsd-skq/sys/dev/vx/if_vxvar.h

80 lines
2.9 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
Start to minimize diffs between vx and ep. These latter is based on a more advanced version of the chips supported by the former. Matt Dodd and I are working towards merging them, and this a step on that path.
2003-10-25 04:05:33 +00:00
* Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer. 2. The name
* of the author may not be used to endorse or promote products derived from
* this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
October 2, 1994
Modified by: Andres Vega Garcia
INRIA - Sophia Antipolis, France
e-mail: avega@sophia.inria.fr
finger: avega@pax.inria.fr
*/
/*
* Ethernet software status per interface.
*/
struct vx_softc {
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
struct ifnet *vx_ifp;
bus_space_tag_t vx_bst;
bus_space_handle_t vx_bsh;
ss if_vx through indent, and use ANSI function definitions, prior to adding if_media and DMA support to the driver. The previous style was inconsistent making it difficult to emulate existing style.
2004-08-18 16:56:54 +00:00
void *vx_intrhand;
struct resource *vx_irq;
struct resource *vx_res;
#define MAX_MBS 8 /* # of mbufs we keep around */
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
struct mbuf *vx_mb[MAX_MBS]; /* spare mbuf storage. */
int vx_next_mb; /* Which mbuf to use next. */
int vx_last_mb; /* Last mbuf. */
ss if_vx through indent, and use ANSI function definitions, prior to adding if_media and DMA support to the driver. The previous style was inconsistent making it difficult to emulate existing style.
2004-08-18 16:56:54 +00:00
char vx_connectors; /* Connectors on this card. */
char vx_connector; /* Connector to use. */
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
short vx_tx_start_thresh; /* Current TX_start_thresh. */
int vx_tx_succ_ok; /* # packets sent in sequence */
ss if_vx through indent, and use ANSI function definitions, prior to adding if_media and DMA support to the driver. The previous style was inconsistent making it difficult to emulate existing style.
2004-08-18 16:56:54 +00:00
/* w/o underrun */
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
struct callout vx_callout; /* Callout for timeouts */
struct mtx vx_mtx;
int vx_buffill_pending;
Start to minimize diffs between vx and ep. These latter is based on a more advanced version of the chips supported by the former. Matt Dodd and I are working towards merging them, and this a step on that path.
2003-10-25 04:05:33 +00:00
};
#define CSR_WRITE_4(sc, reg, val) \
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
bus_space_write_4(sc->vx_bst, sc->vx_bsh, reg, val)
Start to minimize diffs between vx and ep. These latter is based on a more advanced version of the chips supported by the former. Matt Dodd and I are working towards merging them, and this a step on that path.
2003-10-25 04:05:33 +00:00
#define CSR_WRITE_2(sc, reg, val) \
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
bus_space_write_2(sc->vx_bst, sc->vx_bsh, reg, val)
Start to minimize diffs between vx and ep. These latter is based on a more advanced version of the chips supported by the former. Matt Dodd and I are working towards merging them, and this a step on that path.
2003-10-25 04:05:33 +00:00
#define CSR_WRITE_1(sc, reg, val) \
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
bus_space_write_1(sc->vx_bst, sc->vx_bsh, reg, val)
Start to minimize diffs between vx and ep. These latter is based on a more advanced version of the chips supported by the former. Matt Dodd and I are working towards merging them, and this a step on that path.
2003-10-25 04:05:33 +00:00
#define CSR_READ_4(sc, reg) \
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
bus_space_read_4(sc->vx_bst, sc->vx_bsh, reg)
Start to minimize diffs between vx and ep. These latter is based on a more advanced version of the chips supported by the former. Matt Dodd and I are working towards merging them, and this a step on that path.
2003-10-25 04:05:33 +00:00
#define CSR_READ_2(sc, reg) \
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
bus_space_read_2(sc->vx_bst, sc->vx_bsh, reg)
Start to minimize diffs between vx and ep. These latter is based on a more advanced version of the chips supported by the former. Matt Dodd and I are working towards merging them, and this a step on that path.
2003-10-25 04:05:33 +00:00
#define CSR_READ_1(sc, reg) \
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
bus_space_read_1(sc->vx_bst, sc->vx_bsh, reg)
Start to minimize diffs between vx and ep. These latter is based on a more advanced version of the chips supported by the former. Matt Dodd and I are working towards merging them, and this a step on that path.
2003-10-25 04:05:33 +00:00
Rototill vx(4), add locking, and mark MPSAFE: - Rename vxfoo() functions to vx_foo() to improve readability and consistency with other drivers. - Prefix most the softc members with 'vx_' (the other members already had the prefix). - Switch to using callout_init_mtx() and callout_*() rather than timeout() and untimeout(). - Add some missing calls to if_free() in some failure cases in vx_attach(). - Use if_printf() and remove the unit number from the softc. - Remove uses of the 'register' keyword and spls. - Add locked variants of vx_init() and vx_start(). - Add a mutex to the softc and lock it in various appropriate places. - Setup the interrupt handler last during attach. Tested by: imp MFC after: 1 week
2005-10-06 18:27:59 +00:00
#define VX_LOCK(sc) mtx_lock(&(sc)->vx_mtx)
#define VX_UNLOCK(sc) mtx_unlock(&(sc)->vx_mtx)
#define VX_LOCK_ASSERT(sc) mtx_assert(&(sc)->vx_mtx, MA_OWNED)
int vx_attach(device_t);
void vx_stop(struct vx_softc *);
void vx_intr(void *);
int vx_busy_eeprom(struct vx_softc *);
Reference in New Issue Copy Permalink