d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e70cbcb5ba
freebsd-skq/sys/dev/bce/if_bce.c

6867 lines
214 KiB
C
Raw Normal View History

Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
/*-
* Copyright (c) 2006 Broadcom Corporation
* David Christensen <davidch@broadcom.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Broadcom Corporation nor the name of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written consent.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* The following controllers are supported by this driver:
* BCM5706C A2, A3
* BCM5708C B1
*
* The following controllers are not supported by this driver:
* (These are not "Production" versions of the controller.)
*
* BCM5706C A0, A1
* BCM5706S A0, A1, A2, A3
* BCM5708C A0, B0
* BCM5708S A0, B0, B1
*/
Hook bce up to the build
2006-04-10 20:04:22 +00:00
#include "opt_bce.h"
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
#include <dev/bce/if_bcereg.h>
#include <dev/bce/if_bcefw.h>
/****************************************************************************/
/* BCE Driver Version */
/****************************************************************************/
Log: - Removed updates to if_ibytes, if_obytes, if_imcasts, and if_omcasts. These should not be handled by the driver. - Add code to handle excessively fragmented mbufs when mapping TX frames. Reviewed by: ps Approved by: ps (mentor) MFC after: 1 week
2006-06-08 18:31:21 +00:00
char bce_driver_version[] = "v0.9.6";
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
/****************************************************************************/
/* BCE Debug Options */
/****************************************************************************/
#ifdef BCE_DEBUG
u32 bce_debug = BCE_WARN;
/* 0 = Never */
/* 1 = 1 in 2,147,483,648 */
/* 256 = 1 in 8,388,608 */
/* 2048 = 1 in 1,048,576 */
/* 65536 = 1 in 32,768 */
/* 1048576 = 1 in 2,048 */
/* 268435456 = 1 in 8 */
/* 536870912 = 1 in 4 */
/* 1073741824 = 1 in 2 */
/* Controls how often the l2_fhdr frame error check will fail. */
int bce_debug_l2fhdr_status_check = 0;
/* Controls how often the unexpected attention check will fail. */
int bce_debug_unexpected_attention = 0;
/* Controls how often to simulate an mbuf allocation failure. */
int bce_debug_mbuf_allocation_failure = 0;
/* Controls how often to simulate a DMA mapping failure. */
int bce_debug_dma_map_addr_failure = 0;
/* Controls how often to simulate a bootcode failure. */
int bce_debug_bootcode_running_failure = 0;
#endif
/****************************************************************************/
/* PCI Device ID Table */
/* */
/* Used by bce_probe() to identify the devices supported by this driver. */
/****************************************************************************/
#define BCE_DEVDESC_MAX 64
static struct bce_type bce_devs[] = {
/* BCM5706C Controllers and OEM boards. */
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3101,
"HP NC370T Multifunction Gigabit Server Adapter" },
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3106,
"HP NC370i Multifunction Gigabit Server Adapter" },
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, PCI_ANY_ID, PCI_ANY_ID,
"Broadcom NetXtreme II BCM5706 1000Base-T" },
/* BCM5706S controllers and OEM boards. */
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706S, HP_VENDORID, 0x3102,
"HP NC370F Multifunction Gigabit Server Adapter" },
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706S, PCI_ANY_ID, PCI_ANY_ID,
"Broadcom NetXtreme II BCM5706 1000Base-SX" },
/* BCM5708C controllers and OEM boards. */
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708, PCI_ANY_ID, PCI_ANY_ID,
"Broadcom NetXtreme II BCM5708 1000Base-T" },
/* BCM5708S controllers and OEM boards. */
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708, PCI_ANY_ID, PCI_ANY_ID,
"Broadcom NetXtreme II BCM5708 1000Base-T" },
{ 0, 0, 0, 0, NULL }
};
/****************************************************************************/
/* Supported Flash NVRAM device data. */
/****************************************************************************/
static struct flash_spec flash_table[] =
{
/* Slow EEPROM */
{0x00000000, 0x40830380, 0x009f0081, 0xa184a053, 0xaf000400,
1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
"EEPROM - slow"},
/* Expansion entry 0001 */
{0x08000002, 0x4b808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 0001"},
/* Saifun SA25F010 (non-buffered flash) */
/* strap, cfg1, & write1 need updates */
{0x04000001, 0x47808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2,
"Non-buffered flash (128kB)"},
/* Saifun SA25F020 (non-buffered flash) */
/* strap, cfg1, & write1 need updates */
{0x0c000003, 0x4f808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4,
"Non-buffered flash (256kB)"},
/* Expansion entry 0100 */
{0x11000000, 0x53808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 0100"},
/* Entry 0101: ST M45PE10 (non-buffered flash, TetonII B0) */
{0x19000002, 0x5b808201, 0x000500db, 0x03840253, 0xaf020406,
0, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE,
ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*2,
"Entry 0101: ST M45PE10 (128kB non-bufferred)"},
/* Entry 0110: ST M45PE20 (non-buffered flash)*/
{0x15000001, 0x57808201, 0x000500db, 0x03840253, 0xaf020406,
0, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE,
ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*4,
"Entry 0110: ST M45PE20 (256kB non-bufferred)"},
/* Saifun SA25F005 (non-buffered flash) */
/* strap, cfg1, & write1 need updates */
{0x1d000003, 0x5f808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE,
"Non-buffered flash (64kB)"},
/* Fast EEPROM */
{0x22000000, 0x62808380, 0x009f0081, 0xa184a053, 0xaf000400,
1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
"EEPROM - fast"},
/* Expansion entry 1001 */
{0x2a000002, 0x6b808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1001"},
/* Expansion entry 1010 */
{0x26000001, 0x67808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1010"},
/* ATMEL AT45DB011B (buffered flash) */
{0x2e000003, 0x6e808273, 0x00570081, 0x68848353, 0xaf000400,
1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE,
"Buffered flash (128kB)"},
/* Expansion entry 1100 */
{0x33000000, 0x73808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1100"},
/* Expansion entry 1101 */
{0x3b000002, 0x7b808201, 0x00050081, 0x03840253, 0xaf020406,
0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1101"},
/* Ateml Expansion entry 1110 */
{0x37000001, 0x76808273, 0x00570081, 0x68848353, 0xaf000400,
1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
BUFFERED_FLASH_BYTE_ADDR_MASK, 0,
"Entry 1110 (Atmel)"},
/* ATMEL AT45DB021B (buffered flash) */
{0x3f000003, 0x7e808273, 0x00570081, 0x68848353, 0xaf000400,
1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE*2,
"Buffered flash (256kB)"},
};
/****************************************************************************/
/* FreeBSD device entry points. */
/****************************************************************************/
static int bce_probe (device_t);
static int bce_attach (device_t);
static int bce_detach (device_t);
static void bce_shutdown (device_t);
/****************************************************************************/
/* BCE Debug Data Structure Dump Routines */
/****************************************************************************/
#ifdef BCE_DEBUG
static void bce_dump_mbuf (struct bce_softc *, struct mbuf *);
static void bce_dump_tx_mbuf_chain (struct bce_softc *, int, int);
static void bce_dump_rx_mbuf_chain (struct bce_softc *, int, int);
static void bce_dump_txbd (struct bce_softc *, int, struct tx_bd *);
static void bce_dump_rxbd (struct bce_softc *, int, struct rx_bd *);
static void bce_dump_l2fhdr (struct bce_softc *, int, struct l2_fhdr *);
static void bce_dump_tx_chain (struct bce_softc *, int, int);
static void bce_dump_rx_chain (struct bce_softc *, int, int);
static void bce_dump_status_block (struct bce_softc *);
static void bce_dump_stats_block (struct bce_softc *);
static void bce_dump_driver_state (struct bce_softc *);
static void bce_dump_hw_state (struct bce_softc *);
static void bce_breakpoint (struct bce_softc *);
#endif
/****************************************************************************/
/* BCE Register/Memory Access Routines */
/****************************************************************************/
static u32 bce_reg_rd_ind (struct bce_softc *, u32);
static void bce_reg_wr_ind (struct bce_softc *, u32, u32);
static void bce_ctx_wr (struct bce_softc *, u32, u32, u32);
static int bce_miibus_read_reg (device_t, int, int);
static int bce_miibus_write_reg (device_t, int, int, int);
static void bce_miibus_statchg (device_t);
/****************************************************************************/
/* BCE NVRAM Access Routines */
/****************************************************************************/
static int bce_acquire_nvram_lock (struct bce_softc *);
static int bce_release_nvram_lock (struct bce_softc *);
static void bce_enable_nvram_access (struct bce_softc *);
static void bce_disable_nvram_access(struct bce_softc *);
static int bce_nvram_read_dword (struct bce_softc *, u32, u8 *, u32);
static int bce_init_nvram (struct bce_softc *);
static int bce_nvram_read (struct bce_softc *, u32, u8 *, int);
static int bce_nvram_test (struct bce_softc *);
#ifdef BCE_NVRAM_WRITE_SUPPORT
static int bce_enable_nvram_write (struct bce_softc *);
static void bce_disable_nvram_write (struct bce_softc *);
static int bce_nvram_erase_page (struct bce_softc *, u32);
static int bce_nvram_write_dword (struct bce_softc *, u32, u8 *, u32);
static int bce_nvram_write (struct bce_softc *, u32, u8 *, int);
#endif
/****************************************************************************/
/* */
/****************************************************************************/
static void bce_dma_map_addr (void *, bus_dma_segment_t *, int, int);
static void bce_dma_map_tx_desc (void *, bus_dma_segment_t *, int, bus_size_t, int);
static int bce_dma_alloc (device_t);
static void bce_dma_free (struct bce_softc *);
static void bce_release_resources (struct bce_softc *);
/****************************************************************************/
/* BCE Firmware Synchronization and Load */
/****************************************************************************/
static int bce_fw_sync (struct bce_softc *, u32);
static void bce_load_rv2p_fw (struct bce_softc *, u32 *, u32, u32);
static void bce_load_cpu_fw (struct bce_softc *, struct cpu_reg *, struct fw_info *);
static void bce_init_cpus (struct bce_softc *);
static void bce_stop (struct bce_softc *);
static int bce_reset (struct bce_softc *, u32);
static int bce_chipinit (struct bce_softc *);
static int bce_blockinit (struct bce_softc *);
static int bce_get_buf (struct bce_softc *, struct mbuf *, u16 *, u16 *, u32 *);
static int bce_init_tx_chain (struct bce_softc *);
static int bce_init_rx_chain (struct bce_softc *);
static void bce_free_rx_chain (struct bce_softc *);
static void bce_free_tx_chain (struct bce_softc *);
static int bce_tx_encap (struct bce_softc *, struct mbuf *, u16 *, u16 *, u32 *);
static void bce_start_locked (struct ifnet *);
static void bce_start (struct ifnet *);
static int bce_ioctl (struct ifnet *, u_long, caddr_t);
static void bce_watchdog (struct ifnet *);
static int bce_ifmedia_upd (struct ifnet *);
static void bce_ifmedia_sts (struct ifnet *, struct ifmediareq *);
static void bce_init_locked (struct bce_softc *);
static void bce_init (void *);
Add a new 'bce_mgmt_init_locked' function to enable the minimal parts of the chip to let ASF/IPMI firmware to respond to IPMI after attaching and when the chip is down. David looked at it but could really say what they right minimal config. stuff would be. It's not documented. I figured this out via trial and error. Reviewed by: davidch
2006-09-20 18:55:16 +00:00
static void bce_mgmt_init_locked(struct bce_softc *sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
static void bce_init_context (struct bce_softc *);
static void bce_get_mac_addr (struct bce_softc *);
static void bce_set_mac_addr (struct bce_softc *);
static void bce_phy_intr (struct bce_softc *);
static void bce_rx_intr (struct bce_softc *);
static void bce_tx_intr (struct bce_softc *);
static void bce_disable_intr (struct bce_softc *);
static void bce_enable_intr (struct bce_softc *);
#ifdef DEVICE_POLLING
static void bce_poll_locked (struct ifnet *, enum poll_cmd, int);
static void bce_poll (struct ifnet *, enum poll_cmd, int);
#endif
static void bce_intr (void *);
static void bce_set_rx_mode (struct bce_softc *);
static void bce_stats_update (struct bce_softc *);
static void bce_tick_locked (struct bce_softc *);
static void bce_tick (void *);
static void bce_add_sysctls (struct bce_softc *);
/****************************************************************************/
/* FreeBSD device dispatch table. */
/****************************************************************************/
static device_method_t bce_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, bce_probe),
DEVMETHOD(device_attach, bce_attach),
DEVMETHOD(device_detach, bce_detach),
DEVMETHOD(device_shutdown, bce_shutdown),
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, bce_miibus_read_reg),
DEVMETHOD(miibus_writereg, bce_miibus_write_reg),
DEVMETHOD(miibus_statchg, bce_miibus_statchg),
{ 0, 0 }
};
static driver_t bce_driver = {
"bce",
bce_methods,
sizeof(struct bce_softc)
};
static devclass_t bce_devclass;
MODULE_DEPEND(bce, pci, 1, 1, 1);
MODULE_DEPEND(bce, ether, 1, 1, 1);
MODULE_DEPEND(bce, miibus, 1, 1, 1);
DRIVER_MODULE(bce, pci, bce_driver, bce_devclass, 0, 0);
DRIVER_MODULE(miibus, bce, miibus_driver, miibus_devclass, 0, 0);
/****************************************************************************/
/* Device probe function. */
/* */
/* Compares the device to the driver's list of supported devices and */
/* reports back to the OS whether this is the right driver for the device. */
/* */
/* Returns: */
/* BUS_PROBE_DEFAULT on success, positive value on failure. */
/****************************************************************************/
static int
bce_probe(device_t dev)
{
struct bce_type *t;
struct bce_softc *sc;
char *descbuf;
u16 vid = 0, did = 0, svid = 0, sdid = 0;
t = bce_devs;
sc = device_get_softc(dev);
bzero(sc, sizeof(struct bce_softc));
sc->bce_unit = device_get_unit(dev);
sc->bce_dev = dev;
/* Get the data for the device to be probed. */
vid = pci_get_vendor(dev);
did = pci_get_device(dev);
svid = pci_get_subvendor(dev);
sdid = pci_get_subdevice(dev);
DBPRINT(sc, BCE_VERBOSE_LOAD,
"%s(); VID = 0x%04X, DID = 0x%04X, SVID = 0x%04X, "
"SDID = 0x%04X\n", __FUNCTION__, vid, did, svid, sdid);
/* Look through the list of known devices for a match. */
while(t->bce_name != NULL) {
if ((vid == t->bce_vid) && (did == t->bce_did) &&
((svid == t->bce_svid) || (t->bce_svid == PCI_ANY_ID)) &&
((sdid == t->bce_sdid) || (t->bce_sdid == PCI_ANY_ID))) {
descbuf = malloc(BCE_DEVDESC_MAX, M_TEMP, M_NOWAIT);
if (descbuf == NULL)
return(ENOMEM);
/* Print out the device identity. */
snprintf(descbuf, BCE_DEVDESC_MAX, "%s (%c%d), %s",
t->bce_name,
(((pci_read_config(dev, PCIR_REVID, 4) & 0xf0) >> 4) + 'A'),
(pci_read_config(dev, PCIR_REVID, 4) & 0xf),
bce_driver_version);
device_set_desc_copy(dev, descbuf);
free(descbuf, M_TEMP);
return(BUS_PROBE_DEFAULT);
}
t++;
}
DBPRINT(sc, BCE_VERBOSE_LOAD, "%s(%d): No IOCTL match found!\n",
__FILE__, __LINE__);
return(ENXIO);
}
/****************************************************************************/
/* Device attach function. */
/* */
/* Allocates device resources, performs secondary chip identification, */
/* resets and initializes the hardware, and initializes driver instance */
/* variables. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_attach(device_t dev)
{
struct bce_softc *sc;
struct ifnet *ifp;
u32 val;
int mbuf, rid, rc = 0;
sc = device_get_softc(dev);
sc->bce_dev = dev;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
mbuf = device_get_unit(dev);
sc->bce_unit = mbuf;
pci_enable_busmaster(dev);
/* Allocate PCI memory resources. */
rid = PCIR_BAR(0);
sc->bce_res = bus_alloc_resource_any(
dev, /* dev */
SYS_RES_MEMORY, /* type */
&rid, /* rid */
RF_ACTIVE | PCI_RF_DENSE); /* flags */
if (sc->bce_res == NULL) {
BCE_PRINTF(sc, "%s(%d): PCI memory allocation failed\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bce_attach_fail;
}
/* Get various resource handles. */
sc->bce_btag = rman_get_bustag(sc->bce_res);
sc->bce_bhandle = rman_get_bushandle(sc->bce_res);
sc->bce_vhandle = (vm_offset_t) rman_get_virtual(sc->bce_res);
/* Allocate PCI IRQ resources. */
rid = 0;
sc->bce_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->bce_irq == NULL) {
BCE_PRINTF(sc, "%s(%d): PCI map interrupt failed\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bce_attach_fail;
}
/* Initialize mutex for the current device instance. */
BCE_LOCK_INIT(sc, device_get_nameunit(dev));
/*
* Configure byte swap and enable indirect register access.
* Rely on CPU to do target byte swapping on big endian systems.
* Access to registers outside of PCI configurtion space are not
* valid until this is done.
*/
pci_write_config(dev, BCE_PCICFG_MISC_CONFIG,
BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP, 4);
/* Save ASIC revsion info. */
sc->bce_chipid = REG_RD(sc, BCE_MISC_ID);
/* Weed out any non-production controller revisions. */
switch(BCE_CHIP_ID(sc)) {
case BCE_CHIP_ID_5706_A0:
case BCE_CHIP_ID_5706_A1:
case BCE_CHIP_ID_5708_A0:
case BCE_CHIP_ID_5708_B0:
BCE_PRINTF(sc, "%s(%d): Unsupported controller revision (%c%d)!\n",
__FILE__, __LINE__,
(((pci_read_config(dev, PCIR_REVID, 4) & 0xf0) >> 4) + 'A'),
(pci_read_config(dev, PCIR_REVID, 4) & 0xf));
rc = ENODEV;
goto bce_attach_fail;
}
if (BCE_CHIP_BOND_ID(sc) & BCE_CHIP_BOND_ID_SERDES_BIT) {
BCE_PRINTF(sc, "%s(%d): SerDes controllers are not supported!\n",
__FILE__, __LINE__);
rc = ENODEV;
goto bce_attach_fail;
}
/*
* The embedded PCIe to PCI-X bridge (EPB)
* in the 5708 cannot address memory above
* 40 bits (E7_5708CB1_23043 & E6_5708SB1_23043).
*/
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5708)
sc->max_bus_addr = BCE_BUS_SPACE_MAXADDR;
else
sc->max_bus_addr = BUS_SPACE_MAXADDR;
/*
* Find the base address for shared memory access.
* Newer versions of bootcode use a signature and offset
* while older versions use a fixed address.
*/
val = REG_RD_IND(sc, BCE_SHM_HDR_SIGNATURE);
if ((val & BCE_SHM_HDR_SIGNATURE_SIG_MASK) == BCE_SHM_HDR_SIGNATURE_SIG)
sc->bce_shmem_base = REG_RD_IND(sc, BCE_SHM_HDR_ADDR_0);
else
sc->bce_shmem_base = HOST_VIEW_SHMEM_BASE;
DBPRINT(sc, BCE_INFO, "bce_shmem_base = 0x%08X\n", sc->bce_shmem_base);
/* Set initial device and PHY flags */
sc->bce_flags = 0;
sc->bce_phy_flags = 0;
/* Get PCI bus information (speed and type). */
val = REG_RD(sc, BCE_PCICFG_MISC_STATUS);
if (val & BCE_PCICFG_MISC_STATUS_PCIX_DET) {
u32 clkreg;
sc->bce_flags |= BCE_PCIX_FLAG;
clkreg = REG_RD(sc, BCE_PCICFG_PCI_CLOCK_CONTROL_BITS);
clkreg &= BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET;
switch (clkreg) {
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ:
sc->bus_speed_mhz = 133;
break;
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ:
sc->bus_speed_mhz = 100;
break;
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ:
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ:
sc->bus_speed_mhz = 66;
break;
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ:
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ:
sc->bus_speed_mhz = 50;
break;
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW:
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ:
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ:
sc->bus_speed_mhz = 33;
break;
}
} else {
if (val & BCE_PCICFG_MISC_STATUS_M66EN)
sc->bus_speed_mhz = 66;
else
sc->bus_speed_mhz = 33;
}
if (val & BCE_PCICFG_MISC_STATUS_32BIT_DET)
sc->bce_flags |= BCE_PCI_32BIT_FLAG;
BCE_PRINTF(sc, "ASIC ID 0x%08X; Revision (%c%d); PCI%s %s %dMHz\n",
sc->bce_chipid,
((BCE_CHIP_ID(sc) & 0xf000) >> 12) + 'A',
((BCE_CHIP_ID(sc) & 0x0ff0) >> 4),
((sc->bce_flags & BCE_PCIX_FLAG) ? "-X" : ""),
((sc->bce_flags & BCE_PCI_32BIT_FLAG) ? "32-bit" : "64-bit"),
sc->bus_speed_mhz);
/* Reset the controller. */
if (bce_reset(sc, BCE_DRV_MSG_CODE_RESET)) {
rc = ENXIO;
goto bce_attach_fail;
}
/* Initialize the controller. */
if (bce_chipinit(sc)) {
BCE_PRINTF(sc, "%s(%d): Controller initialization failed!\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bce_attach_fail;
}
/* Perform NVRAM test. */
if (bce_nvram_test(sc)) {
BCE_PRINTF(sc, "%s(%d): NVRAM test failed!\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bce_attach_fail;
}
/* Fetch the permanent Ethernet MAC address. */
bce_get_mac_addr(sc);
/*
* Trip points control how many BDs
* should be ready before generating an
* interrupt while ticks control how long
* a BD can sit in the chain before
* generating an interrupt. Set the default
* values for the RX and TX rings.
*/
#ifdef BCE_DRBUG
/* Force more frequent interrupts. */
sc->bce_tx_quick_cons_trip_int = 1;
sc->bce_tx_quick_cons_trip = 1;
sc->bce_tx_ticks_int = 0;
sc->bce_tx_ticks = 0;
sc->bce_rx_quick_cons_trip_int = 1;
sc->bce_rx_quick_cons_trip = 1;
sc->bce_rx_ticks_int = 0;
sc->bce_rx_ticks = 0;
#else
sc->bce_tx_quick_cons_trip_int = 20;
sc->bce_tx_quick_cons_trip = 20;
sc->bce_tx_ticks_int = 80;
sc->bce_tx_ticks = 80;
sc->bce_rx_quick_cons_trip_int = 6;
sc->bce_rx_quick_cons_trip = 6;
sc->bce_rx_ticks_int = 18;
sc->bce_rx_ticks = 18;
#endif
/* Update statistics once every second. */
sc->bce_stats_ticks = 1000000 & 0xffff00;
/*
* The copper based NetXtreme II controllers
* use an integrated PHY at address 1 while
* the SerDes controllers use a PHY at
* address 2.
*/
sc->bce_phy_addr = 1;
if (BCE_CHIP_BOND_ID(sc) & BCE_CHIP_BOND_ID_SERDES_BIT) {
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
sc->bce_flags |= BCE_NO_WOL_FLAG;
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5708) {
sc->bce_phy_addr = 2;
val = REG_RD_IND(sc, sc->bce_shmem_base +
BCE_SHARED_HW_CFG_CONFIG);
if (val & BCE_SHARED_HW_CFG_PHY_2_5G)
sc->bce_phy_flags |= BCE_PHY_2_5G_CAPABLE_FLAG;
}
}
/* Allocate DMA memory resources. */
if (bce_dma_alloc(dev)) {
BCE_PRINTF(sc, "%s(%d): DMA resource allocation failed!\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bce_attach_fail;
}
/* Allocate an ifnet structure. */
ifp = sc->bce_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
BCE_PRINTF(sc, "%s(%d): Interface allocation failed!\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bce_attach_fail;
}
/* Initialize the ifnet interface. */
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = bce_ioctl;
ifp->if_start = bce_start;
ifp->if_timer = 0;
ifp->if_watchdog = bce_watchdog;
ifp->if_init = bce_init;
ifp->if_mtu = ETHERMTU;
ifp->if_hwassist = BCE_IF_HWASSIST;
ifp->if_capabilities = BCE_IF_CAPABILITIES;
ifp->if_capenable = ifp->if_capabilities;
/* Assume a standard 1500 byte MTU size for mbuf allocations. */
sc->mbuf_alloc_size = MCLBYTES;
#ifdef DEVICE_POLLING
ifp->if_capabilities |= IFCAP_POLLING;
#endif
ifp->if_snd.ifq_drv_maxlen = USABLE_TX_BD;
if (sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)
ifp->if_baudrate = IF_Gbps(2.5);
else
ifp->if_baudrate = IF_Gbps(1);
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
IFQ_SET_READY(&ifp->if_snd);
if (sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) {
BCE_PRINTF(sc, "%s(%d): SerDes is not supported by this driver!\n",
__FILE__, __LINE__);
rc = ENODEV;
goto bce_attach_fail;
} else {
/* Look for our PHY. */
if (mii_phy_probe(dev, &sc->bce_miibus, bce_ifmedia_upd,
bce_ifmedia_sts)) {
BCE_PRINTF(sc, "%s(%d): PHY probe failed!\n",
__FILE__, __LINE__);
rc = ENXIO;
goto bce_attach_fail;
}
}
/* Attach to the Ethernet interface list. */
ether_ifattach(ifp, sc->eaddr);
#if __FreeBSD_version < 500000
callout_init(&sc->bce_stat_ch);
#else
callout_init(&sc->bce_stat_ch, CALLOUT_MPSAFE);
#endif
/* Hookup IRQ last. */
rc = bus_setup_intr(dev, sc->bce_irq, INTR_TYPE_NET | INTR_MPSAFE,
bce_intr, sc, &sc->bce_intrhand);
if (rc) {
BCE_PRINTF(sc, "%s(%d): Failed to setup IRQ!\n",
__FILE__, __LINE__);
bce_detach(dev);
goto bce_attach_exit;
}
/* Print some important debugging info. */
DBRUN(BCE_INFO, bce_dump_driver_state(sc));
/* Add the supported sysctls to the kernel. */
bce_add_sysctls(sc);
Add a new 'bce_mgmt_init_locked' function to enable the minimal parts of the chip to let ASF/IPMI firmware to respond to IPMI after attaching and when the chip is down. David looked at it but could really say what they right minimal config. stuff would be. It's not documented. I figured this out via trial and error. Reviewed by: davidch
2006-09-20 18:55:16 +00:00
/* Get the firmware running so IPMI still works */
BCE_LOCK(sc);
bce_mgmt_init_locked(sc);
BCE_UNLOCK(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
goto bce_attach_exit;
bce_attach_fail:
bce_release_resources(sc);
bce_attach_exit:
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Device detach function. */
/* */
/* Stops the controller, resets the controller, and releases resources. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_detach(device_t dev)
{
struct bce_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
ifp = sc->bce_ifp;
#ifdef DEVICE_POLLING
if (ifp->if_capenable & IFCAP_POLLING)
ether_poll_deregister(ifp);
#endif
/* Stop and reset the controller. */
BCE_LOCK(sc);
bce_stop(sc);
bce_reset(sc, BCE_DRV_MSG_CODE_RESET);
BCE_UNLOCK(sc);
ether_ifdetach(ifp);
/* If we have a child device on the MII bus remove it too. */
if (sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) {
ifmedia_removeall(&sc->bce_ifmedia);
} else {
bus_generic_detach(dev);
device_delete_child(dev, sc->bce_miibus);
}
/* Release all remaining resources. */
bce_release_resources(sc);
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(0);
}
/****************************************************************************/
/* Device shutdown function. */
/* */
/* Stops and resets the controller. */
/* */
/* Returns: */
/* Nothing */
/****************************************************************************/
static void
bce_shutdown(device_t dev)
{
struct bce_softc *sc = device_get_softc(dev);
BCE_LOCK(sc);
bce_stop(sc);
bce_reset(sc, BCE_DRV_MSG_CODE_RESET);
BCE_UNLOCK(sc);
}
/****************************************************************************/
/* Indirect register read. */
/* */
/* Reads NetXtreme II registers using an index/data register pair in PCI */
/* configuration space. Using this mechanism avoids issues with posted */
/* reads but is much slower than memory-mapped I/O. */
/* */
/* Returns: */
/* The value of the register. */
/****************************************************************************/
static u32
bce_reg_rd_ind(struct bce_softc *sc, u32 offset)
{
device_t dev;
dev = sc->bce_dev;
pci_write_config(dev, BCE_PCICFG_REG_WINDOW_ADDRESS, offset, 4);
#ifdef BCE_DEBUG
{
u32 val;
val = pci_read_config(dev, BCE_PCICFG_REG_WINDOW, 4);
DBPRINT(sc, BCE_EXCESSIVE, "%s(); offset = 0x%08X, val = 0x%08X\n",
__FUNCTION__, offset, val);
return val;
}
#else
return pci_read_config(dev, BCE_PCICFG_REG_WINDOW, 4);
#endif
}
/****************************************************************************/
/* Indirect register write. */
/* */
/* Writes NetXtreme II registers using an index/data register pair in PCI */
/* configuration space. Using this mechanism avoids issues with posted */
/* writes but is muchh slower than memory-mapped I/O. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_reg_wr_ind(struct bce_softc *sc, u32 offset, u32 val)
{
device_t dev;
dev = sc->bce_dev;
DBPRINT(sc, BCE_EXCESSIVE, "%s(); offset = 0x%08X, val = 0x%08X\n",
__FUNCTION__, offset, val);
pci_write_config(dev, BCE_PCICFG_REG_WINDOW_ADDRESS, offset, 4);
pci_write_config(dev, BCE_PCICFG_REG_WINDOW, val, 4);
}
/****************************************************************************/
/* Context memory write. */
/* */
/* The NetXtreme II controller uses context memory to track connection */
/* information for L2 and higher network protocols. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_ctx_wr(struct bce_softc *sc, u32 cid_addr, u32 offset, u32 val)
{
DBPRINT(sc, BCE_EXCESSIVE, "%s(); cid_addr = 0x%08X, offset = 0x%08X, "
"val = 0x%08X\n", __FUNCTION__, cid_addr, offset, val);
offset += cid_addr;
REG_WR(sc, BCE_CTX_DATA_ADR, offset);
REG_WR(sc, BCE_CTX_DATA, val);
}
/****************************************************************************/
/* PHY register read. */
/* */
/* Implements register reads on the MII bus. */
/* */
/* Returns: */
/* The value of the register. */
/****************************************************************************/
static int
bce_miibus_read_reg(device_t dev, int phy, int reg)
{
struct bce_softc *sc;
u32 val;
int i;
sc = device_get_softc(dev);
/* Make sure we are accessing the correct PHY address. */
if (phy != sc->bce_phy_addr) {
DBPRINT(sc, BCE_VERBOSE, "Invalid PHY address %d for PHY read!\n", phy);
return(0);
}
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
val = REG_RD(sc, BCE_EMAC_MDIO_MODE);
val &= ~BCE_EMAC_MDIO_MODE_AUTO_POLL;
REG_WR(sc, BCE_EMAC_MDIO_MODE, val);
REG_RD(sc, BCE_EMAC_MDIO_MODE);
DELAY(40);
}
val = BCE_MIPHY(phy) | BCE_MIREG(reg) |
BCE_EMAC_MDIO_COMM_COMMAND_READ | BCE_EMAC_MDIO_COMM_DISEXT |
BCE_EMAC_MDIO_COMM_START_BUSY;
REG_WR(sc, BCE_EMAC_MDIO_COMM, val);
for (i = 0; i < BCE_PHY_TIMEOUT; i++) {
DELAY(10);
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
if (!(val & BCE_EMAC_MDIO_COMM_START_BUSY)) {
DELAY(5);
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
val &= BCE_EMAC_MDIO_COMM_DATA;
break;
}
}
if (val & BCE_EMAC_MDIO_COMM_START_BUSY) {
BCE_PRINTF(sc, "%s(%d): Error: PHY read timeout! phy = %d, reg = 0x%04X\n",
__FILE__, __LINE__, phy, reg);
val = 0x0;
} else {
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
}
DBPRINT(sc, BCE_EXCESSIVE, "%s(): phy = %d, reg = 0x%04X, val = 0x%04X\n",
__FUNCTION__, phy, (u16) reg & 0xffff, (u16) val & 0xffff);
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
val = REG_RD(sc, BCE_EMAC_MDIO_MODE);
val |= BCE_EMAC_MDIO_MODE_AUTO_POLL;
REG_WR(sc, BCE_EMAC_MDIO_MODE, val);
REG_RD(sc, BCE_EMAC_MDIO_MODE);
DELAY(40);
}
return (val & 0xffff);
}
/****************************************************************************/
/* PHY register write. */
/* */
/* Implements register writes on the MII bus. */
/* */
/* Returns: */
/* The value of the register. */
/****************************************************************************/
static int
bce_miibus_write_reg(device_t dev, int phy, int reg, int val)
{
struct bce_softc *sc;
u32 val1;
int i;
sc = device_get_softc(dev);
/* Make sure we are accessing the correct PHY address. */
if (phy != sc->bce_phy_addr) {
DBPRINT(sc, BCE_WARN, "Invalid PHY address %d for PHY write!\n", phy);
return(0);
}
DBPRINT(sc, BCE_EXCESSIVE, "%s(): phy = %d, reg = 0x%04X, val = 0x%04X\n",
__FUNCTION__, phy, (u16) reg & 0xffff, (u16) val & 0xffff);
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
val1 = REG_RD(sc, BCE_EMAC_MDIO_MODE);
val1 &= ~BCE_EMAC_MDIO_MODE_AUTO_POLL;
REG_WR(sc, BCE_EMAC_MDIO_MODE, val1);
REG_RD(sc, BCE_EMAC_MDIO_MODE);
DELAY(40);
}
val1 = BCE_MIPHY(phy) | BCE_MIREG(reg) | val |
BCE_EMAC_MDIO_COMM_COMMAND_WRITE |
BCE_EMAC_MDIO_COMM_START_BUSY | BCE_EMAC_MDIO_COMM_DISEXT;
REG_WR(sc, BCE_EMAC_MDIO_COMM, val1);
for (i = 0; i < BCE_PHY_TIMEOUT; i++) {
DELAY(10);
val1 = REG_RD(sc, BCE_EMAC_MDIO_COMM);
if (!(val1 & BCE_EMAC_MDIO_COMM_START_BUSY)) {
DELAY(5);
break;
}
}
if (val1 & BCE_EMAC_MDIO_COMM_START_BUSY)
BCE_PRINTF(sc, "%s(%d): PHY write timeout!\n",
__FILE__, __LINE__);
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
val1 = REG_RD(sc, BCE_EMAC_MDIO_MODE);
val1 |= BCE_EMAC_MDIO_MODE_AUTO_POLL;
REG_WR(sc, BCE_EMAC_MDIO_MODE, val1);
REG_RD(sc, BCE_EMAC_MDIO_MODE);
DELAY(40);
}
return 0;
}
/****************************************************************************/
/* MII bus status change. */
/* */
/* Called by the MII bus driver when the PHY establishes link to set the */
/* MAC interface registers. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_miibus_statchg(device_t dev)
{
struct bce_softc *sc;
struct mii_data *mii;
sc = device_get_softc(dev);
mii = device_get_softc(sc->bce_miibus);
BCE_CLRBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_PORT);
/* Set MII or GMII inerface based on the speed negotiated by the PHY. */
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) {
DBPRINT(sc, BCE_INFO, "Setting GMII interface.\n");
BCE_SETBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_PORT_GMII);
} else {
DBPRINT(sc, BCE_INFO, "Setting MII interface.\n");
BCE_SETBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_PORT_MII);
}
/* Set half or full duplex based on the duplicity negotiated by the PHY. */
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
DBPRINT(sc, BCE_INFO, "Setting Full-Duplex interface.\n");
BCE_CLRBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_HALF_DUPLEX);
} else {
DBPRINT(sc, BCE_INFO, "Setting Half-Duplex interface.\n");
BCE_SETBIT(sc, BCE_EMAC_MODE, BCE_EMAC_MODE_HALF_DUPLEX);
}
}
/****************************************************************************/
/* Acquire NVRAM lock. */
/* */
/* Before the NVRAM can be accessed the caller must acquire an NVRAM lock. */
/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */
/* for use by the driver. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_acquire_nvram_lock(struct bce_softc *sc)
{
u32 val;
int j;
DBPRINT(sc, BCE_VERBOSE, "Acquiring NVRAM lock.\n");
/* Request access to the flash interface. */
REG_WR(sc, BCE_NVM_SW_ARB, BCE_NVM_SW_ARB_ARB_REQ_SET2);
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
val = REG_RD(sc, BCE_NVM_SW_ARB);
if (val & BCE_NVM_SW_ARB_ARB_ARB2)
break;
DELAY(5);
}
if (j >= NVRAM_TIMEOUT_COUNT) {
DBPRINT(sc, BCE_WARN, "Timeout acquiring NVRAM lock!\n");
return EBUSY;
}
return 0;
}
/****************************************************************************/
/* Release NVRAM lock. */
/* */
/* When the caller is finished accessing NVRAM the lock must be released. */
/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */
/* for use by the driver. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_release_nvram_lock(struct bce_softc *sc)
{
int j;
u32 val;
DBPRINT(sc, BCE_VERBOSE, "Releasing NVRAM lock.\n");
/*
* Relinquish nvram interface.
*/
REG_WR(sc, BCE_NVM_SW_ARB, BCE_NVM_SW_ARB_ARB_REQ_CLR2);
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
val = REG_RD(sc, BCE_NVM_SW_ARB);
if (!(val & BCE_NVM_SW_ARB_ARB_ARB2))
break;
DELAY(5);
}
if (j >= NVRAM_TIMEOUT_COUNT) {
DBPRINT(sc, BCE_WARN, "Timeout reeasing NVRAM lock!\n");
return EBUSY;
}
return 0;
}
#ifdef BCE_NVRAM_WRITE_SUPPORT
/****************************************************************************/
/* Enable NVRAM write access. */
/* */
/* Before writing to NVRAM the caller must enable NVRAM writes. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_enable_nvram_write(struct bce_softc *sc)
{
u32 val;
DBPRINT(sc, BCE_VERBOSE, "Enabling NVRAM write.\n");
val = REG_RD(sc, BCE_MISC_CFG);
REG_WR(sc, BCE_MISC_CFG, val | BCE_MISC_CFG_NVM_WR_EN_PCI);
if (!sc->bce_flash_info->buffered) {
int j;
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_WREN | BCE_NVM_COMMAND_DOIT);
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
DELAY(5);
val = REG_RD(sc, BCE_NVM_COMMAND);
if (val & BCE_NVM_COMMAND_DONE)
break;
}
if (j >= NVRAM_TIMEOUT_COUNT) {
DBPRINT(sc, BCE_WARN, "Timeout writing NVRAM!\n");
return EBUSY;
}
}
return 0;
}
/****************************************************************************/
/* Disable NVRAM write access. */
/* */
/* When the caller is finished writing to NVRAM write access must be */
/* disabled. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_disable_nvram_write(struct bce_softc *sc)
{
u32 val;
DBPRINT(sc, BCE_VERBOSE, "Disabling NVRAM write.\n");
val = REG_RD(sc, BCE_MISC_CFG);
REG_WR(sc, BCE_MISC_CFG, val & ~BCE_MISC_CFG_NVM_WR_EN);
}
#endif
/****************************************************************************/
/* Enable NVRAM access. */
/* */
/* Before accessing NVRAM for read or write operations the caller must */
/* enabled NVRAM access. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_enable_nvram_access(struct bce_softc *sc)
{
u32 val;
DBPRINT(sc, BCE_VERBOSE, "Enabling NVRAM access.\n");
val = REG_RD(sc, BCE_NVM_ACCESS_ENABLE);
/* Enable both bits, even on read. */
REG_WR(sc, BCE_NVM_ACCESS_ENABLE,
val | BCE_NVM_ACCESS_ENABLE_EN | BCE_NVM_ACCESS_ENABLE_WR_EN);
}
/****************************************************************************/
/* Disable NVRAM access. */
/* */
/* When the caller is finished accessing NVRAM access must be disabled. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_disable_nvram_access(struct bce_softc *sc)
{
u32 val;
DBPRINT(sc, BCE_VERBOSE, "Disabling NVRAM access.\n");
val = REG_RD(sc, BCE_NVM_ACCESS_ENABLE);
/* Disable both bits, even after read. */
REG_WR(sc, BCE_NVM_ACCESS_ENABLE,
val & ~(BCE_NVM_ACCESS_ENABLE_EN |
BCE_NVM_ACCESS_ENABLE_WR_EN));
}
#ifdef BCE_NVRAM_WRITE_SUPPORT
/****************************************************************************/
/* Erase NVRAM page before writing. */
/* */
/* Non-buffered flash parts require that a page be erased before it is */
/* written. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_nvram_erase_page(struct bce_softc *sc, u32 offset)
{
u32 cmd;
int j;
/* Buffered flash doesn't require an erase. */
if (sc->bce_flash_info->buffered)
return 0;
DBPRINT(sc, BCE_VERBOSE, "Erasing NVRAM page.\n");
/* Build an erase command. */
cmd = BCE_NVM_COMMAND_ERASE | BCE_NVM_COMMAND_WR |
BCE_NVM_COMMAND_DOIT;
/*
* Clear the DONE bit separately, set the NVRAM adress to erase,
* and issue the erase command.
*/
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
REG_WR(sc, BCE_NVM_COMMAND, cmd);
/* Wait for completion. */
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
u32 val;
DELAY(5);
val = REG_RD(sc, BCE_NVM_COMMAND);
if (val & BCE_NVM_COMMAND_DONE)
break;
}
if (j >= NVRAM_TIMEOUT_COUNT) {
DBPRINT(sc, BCE_WARN, "Timeout erasing NVRAM.\n");
return EBUSY;
}
return 0;
}
#endif /* BCE_NVRAM_WRITE_SUPPORT */
/****************************************************************************/
/* Read a dword (32 bits) from NVRAM. */
/* */
/* Read a 32 bit word from NVRAM. The caller is assumed to have already */
/* obtained the NVRAM lock and enabled the controller for NVRAM access. */
/* */
/* Returns: */
/* 0 on success and the 32 bit value read, positive value on failure. */
/****************************************************************************/
static int
bce_nvram_read_dword(struct bce_softc *sc, u32 offset, u8 *ret_val,
u32 cmd_flags)
{
u32 cmd;
int i, rc = 0;
/* Build the command word. */
cmd = BCE_NVM_COMMAND_DOIT | cmd_flags;
/* Calculate the offset for buffered flash. */
if (sc->bce_flash_info->buffered) {
offset = ((offset / sc->bce_flash_info->page_size) <<
sc->bce_flash_info->page_bits) +
(offset % sc->bce_flash_info->page_size);
}
/*
* Clear the DONE bit separately, set the address to read,
* and issue the read.
*/
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
REG_WR(sc, BCE_NVM_COMMAND, cmd);
/* Wait for completion. */
for (i = 0; i < NVRAM_TIMEOUT_COUNT; i++) {
u32 val;
DELAY(5);
val = REG_RD(sc, BCE_NVM_COMMAND);
if (val & BCE_NVM_COMMAND_DONE) {
val = REG_RD(sc, BCE_NVM_READ);
val = bce_be32toh(val);
memcpy(ret_val, &val, 4);
break;
}
}
/* Check for errors. */
if (i >= NVRAM_TIMEOUT_COUNT) {
BCE_PRINTF(sc, "%s(%d): Timeout error reading NVRAM at offset 0x%08X!\n",
__FILE__, __LINE__, offset);
rc = EBUSY;
}
return(rc);
}
#ifdef BCE_NVRAM_WRITE_SUPPORT
/****************************************************************************/
/* Write a dword (32 bits) to NVRAM. */
/* */
/* Write a 32 bit word to NVRAM. The caller is assumed to have already */
/* obtained the NVRAM lock, enabled the controller for NVRAM access, and */
/* enabled NVRAM write access. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_nvram_write_dword(struct bce_softc *sc, u32 offset, u8 *val,
u32 cmd_flags)
{
u32 cmd, val32;
int j;
/* Build the command word. */
cmd = BCE_NVM_COMMAND_DOIT | BCE_NVM_COMMAND_WR | cmd_flags;
/* Calculate the offset for buffered flash. */
if (sc->bce_flash_info->buffered) {
offset = ((offset / sc->bce_flash_info->page_size) <<
sc->bce_flash_info->page_bits) +
(offset % sc->bce_flash_info->page_size);
}
/*
* Clear the DONE bit separately, convert NVRAM data to big-endian,
* set the NVRAM address to write, and issue the write command
*/
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
memcpy(&val32, val, 4);
val32 = htobe32(val32);
REG_WR(sc, BCE_NVM_WRITE, val32);
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
REG_WR(sc, BCE_NVM_COMMAND, cmd);
/* Wait for completion. */
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
DELAY(5);
if (REG_RD(sc, BCE_NVM_COMMAND) & BCE_NVM_COMMAND_DONE)
break;
}
if (j >= NVRAM_TIMEOUT_COUNT) {
BCE_PRINTF(sc, "%s(%d): Timeout error writing NVRAM at offset 0x%08X\n",
__FILE__, __LINE__, offset);
return EBUSY;
}
return 0;
}
#endif /* BCE_NVRAM_WRITE_SUPPORT */
/****************************************************************************/
/* Initialize NVRAM access. */
/* */
/* Identify the NVRAM device in use and prepare the NVRAM interface to */
/* access that device. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_init_nvram(struct bce_softc *sc)
{
u32 val;
int j, entry_count, rc;
struct flash_spec *flash;
DBPRINT(sc,BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Determine the selected interface. */
val = REG_RD(sc, BCE_NVM_CFG1);
entry_count = sizeof(flash_table) / sizeof(struct flash_spec);
rc = 0;
/*
* Flash reconfiguration is required to support additional
* NVRAM devices not directly supported in hardware.
* Check if the flash interface was reconfigured
* by the bootcode.
*/
if (val & 0x40000000) {
/* Flash interface reconfigured by bootcode. */
DBPRINT(sc,BCE_INFO_LOAD,
"bce_init_nvram(): Flash WAS reconfigured.\n");
for (j = 0, flash = &flash_table[0]; j < entry_count;
j++, flash++) {
if ((val & FLASH_BACKUP_STRAP_MASK) ==
(flash->config1 & FLASH_BACKUP_STRAP_MASK)) {
sc->bce_flash_info = flash;
break;
}
}
} else {
/* Flash interface not yet reconfigured. */
u32 mask;
DBPRINT(sc,BCE_INFO_LOAD,
"bce_init_nvram(): Flash was NOT reconfigured.\n");
if (val & (1 << 23))
mask = FLASH_BACKUP_STRAP_MASK;
else
mask = FLASH_STRAP_MASK;
/* Look for the matching NVRAM device configuration data. */
for (j = 0, flash = &flash_table[0]; j < entry_count; j++, flash++) {
/* Check if the device matches any of the known devices. */
if ((val & mask) == (flash->strapping & mask)) {
/* Found a device match. */
sc->bce_flash_info = flash;
/* Request access to the flash interface. */
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
return rc;
/* Reconfigure the flash interface. */
bce_enable_nvram_access(sc);
REG_WR(sc, BCE_NVM_CFG1, flash->config1);
REG_WR(sc, BCE_NVM_CFG2, flash->config2);
REG_WR(sc, BCE_NVM_CFG3, flash->config3);
REG_WR(sc, BCE_NVM_WRITE1, flash->write1);
bce_disable_nvram_access(sc);
bce_release_nvram_lock(sc);
break;
}
}
}
/* Check if a matching device was found. */
if (j == entry_count) {
sc->bce_flash_info = NULL;
BCE_PRINTF(sc, "%s(%d): Unknown Flash NVRAM found!\n",
__FILE__, __LINE__);
rc = ENODEV;
}
/* Write the flash config data to the shared memory interface. */
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_SHARED_HW_CFG_CONFIG2);
val &= BCE_SHARED_HW_CFG2_NVM_SIZE_MASK;
if (val)
sc->bce_flash_size = val;
else
sc->bce_flash_size = sc->bce_flash_info->total_size;
DBPRINT(sc, BCE_INFO_LOAD, "bce_init_nvram() flash->total_size = 0x%08X\n",
sc->bce_flash_info->total_size);
DBPRINT(sc,BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return rc;
}
/****************************************************************************/
/* Read an arbitrary range of data from NVRAM. */
/* */
/* Prepares the NVRAM interface for access and reads the requested data */
/* into the supplied buffer. */
/* */
/* Returns: */
/* 0 on success and the data read, positive value on failure. */
/****************************************************************************/
static int
bce_nvram_read(struct bce_softc *sc, u32 offset, u8 *ret_buf,
int buf_size)
{
int rc = 0;
u32 cmd_flags, offset32, len32, extra;
if (buf_size == 0)
return 0;
/* Request access to the flash interface. */
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
return rc;
/* Enable access to flash interface */
bce_enable_nvram_access(sc);
len32 = buf_size;
offset32 = offset;
extra = 0;
cmd_flags = 0;
if (offset32 & 3) {
u8 buf[4];
u32 pre_len;
offset32 &= ~3;
pre_len = 4 - (offset & 3);
if (pre_len >= len32) {
pre_len = len32;
cmd_flags = BCE_NVM_COMMAND_FIRST | BCE_NVM_COMMAND_LAST;
}
else {
cmd_flags = BCE_NVM_COMMAND_FIRST;
}
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
if (rc)
return rc;
memcpy(ret_buf, buf + (offset & 3), pre_len);
offset32 += 4;
ret_buf += pre_len;
len32 -= pre_len;
}
if (len32 & 3) {
extra = 4 - (len32 & 3);
len32 = (len32 + 4) & ~3;
}
if (len32 == 4) {
u8 buf[4];
if (cmd_flags)
cmd_flags = BCE_NVM_COMMAND_LAST;
else
cmd_flags = BCE_NVM_COMMAND_FIRST |
BCE_NVM_COMMAND_LAST;
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
memcpy(ret_buf, buf, 4 - extra);
}
else if (len32 > 0) {
u8 buf[4];
/* Read the first word. */
if (cmd_flags)
cmd_flags = 0;
else
cmd_flags = BCE_NVM_COMMAND_FIRST;
rc = bce_nvram_read_dword(sc, offset32, ret_buf, cmd_flags);
/* Advance to the next dword. */
offset32 += 4;
ret_buf += 4;
len32 -= 4;
while (len32 > 4 && rc == 0) {
rc = bce_nvram_read_dword(sc, offset32, ret_buf, 0);
/* Advance to the next dword. */
offset32 += 4;
ret_buf += 4;
len32 -= 4;
}
if (rc)
return rc;
cmd_flags = BCE_NVM_COMMAND_LAST;
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
memcpy(ret_buf, buf, 4 - extra);
}
/* Disable access to flash interface and release the lock. */
bce_disable_nvram_access(sc);
bce_release_nvram_lock(sc);
return rc;
}
#ifdef BCE_NVRAM_WRITE_SUPPORT
/****************************************************************************/
/* Write an arbitrary range of data from NVRAM. */
/* */
/* Prepares the NVRAM interface for write access and writes the requested */
/* data from the supplied buffer. The caller is responsible for */
/* calculating any appropriate CRCs. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_nvram_write(struct bce_softc *sc, u32 offset, u8 *data_buf,
int buf_size)
{
u32 written, offset32, len32;
u8 *buf, start[4], end[4];
int rc = 0;
int align_start, align_end;
buf = data_buf;
offset32 = offset;
len32 = buf_size;
align_start = align_end = 0;
if ((align_start = (offset32 & 3))) {
offset32 &= ~3;
len32 += align_start;
if ((rc = bce_nvram_read(sc, offset32, start, 4)))
return rc;
}
if (len32 & 3) {
if ((len32 > 4) || !align_start) {
align_end = 4 - (len32 & 3);
len32 += align_end;
if ((rc = bce_nvram_read(sc, offset32 + len32 - 4,
end, 4))) {
return rc;
}
}
}
if (align_start || align_end) {
buf = malloc(len32, M_DEVBUF, M_NOWAIT);
if (buf == 0)
return ENOMEM;
if (align_start) {
memcpy(buf, start, 4);
}
if (align_end) {
memcpy(buf + len32 - 4, end, 4);
}
memcpy(buf + align_start, data_buf, buf_size);
}
written = 0;
while ((written < len32) && (rc == 0)) {
u32 page_start, page_end, data_start, data_end;
u32 addr, cmd_flags;
int i;
u8 flash_buffer[264];
/* Find the page_start addr */
page_start = offset32 + written;
page_start -= (page_start % sc->bce_flash_info->page_size);
/* Find the page_end addr */
page_end = page_start + sc->bce_flash_info->page_size;
/* Find the data_start addr */
data_start = (written == 0) ? offset32 : page_start;
/* Find the data_end addr */
data_end = (page_end > offset32 + len32) ?
(offset32 + len32) : page_end;
/* Request access to the flash interface. */
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
goto nvram_write_end;
/* Enable access to flash interface */
bce_enable_nvram_access(sc);
cmd_flags = BCE_NVM_COMMAND_FIRST;
if (sc->bce_flash_info->buffered == 0) {
int j;
/* Read the whole page into the buffer
* (non-buffer flash only) */
for (j = 0; j < sc->bce_flash_info->page_size; j += 4) {
if (j == (sc->bce_flash_info->page_size - 4)) {
cmd_flags |= BCE_NVM_COMMAND_LAST;
}
rc = bce_nvram_read_dword(sc,
page_start + j,
&flash_buffer[j],
cmd_flags);
if (rc)
goto nvram_write_end;
cmd_flags = 0;
}
}
/* Enable writes to flash interface (unlock write-protect) */
if ((rc = bce_enable_nvram_write(sc)) != 0)
goto nvram_write_end;
/* Erase the page */
if ((rc = bce_nvram_erase_page(sc, page_start)) != 0)
goto nvram_write_end;
/* Re-enable the write again for the actual write */
bce_enable_nvram_write(sc);
/* Loop to write back the buffer data from page_start to
* data_start */
i = 0;
if (sc->bce_flash_info->buffered == 0) {
for (addr = page_start; addr < data_start;
addr += 4, i += 4) {
rc = bce_nvram_write_dword(sc, addr,
&flash_buffer[i], cmd_flags);
if (rc != 0)
goto nvram_write_end;
cmd_flags = 0;
}
}
/* Loop to write the new data from data_start to data_end */
for (addr = data_start; addr < data_end; addr += 4, i++) {
if ((addr == page_end - 4) ||
((sc->bce_flash_info->buffered) &&
(addr == data_end - 4))) {
cmd_flags |= BCE_NVM_COMMAND_LAST;
}
rc = bce_nvram_write_dword(sc, addr, buf,
cmd_flags);
if (rc != 0)
goto nvram_write_end;
cmd_flags = 0;
buf += 4;
}
/* Loop to write back the buffer data from data_end
* to page_end */
if (sc->bce_flash_info->buffered == 0) {
for (addr = data_end; addr < page_end;
addr += 4, i += 4) {
if (addr == page_end-4) {
cmd_flags = BCE_NVM_COMMAND_LAST;
}
rc = bce_nvram_write_dword(sc, addr,
&flash_buffer[i], cmd_flags);
if (rc != 0)
goto nvram_write_end;
cmd_flags = 0;
}
}
/* Disable writes to flash interface (lock write-protect) */
bce_disable_nvram_write(sc);
/* Disable access to flash interface */
bce_disable_nvram_access(sc);
bce_release_nvram_lock(sc);
/* Increment written */
written += data_end - data_start;
}
nvram_write_end:
if (align_start || align_end)
free(buf, M_DEVBUF);
return rc;
}
#endif /* BCE_NVRAM_WRITE_SUPPORT */
/****************************************************************************/
/* Verifies that NVRAM is accessible and contains valid data. */
/* */
/* Reads the configuration data from NVRAM and verifies that the CRC is */
/* correct. */
/* */
/* Returns: */
/* 0 on success, positive value on failure. */
/****************************************************************************/
static int
bce_nvram_test(struct bce_softc *sc)
{
u32 buf[BCE_NVRAM_SIZE / 4];
u8 *data = (u8 *) buf;
int rc = 0;
u32 magic, csum;
/*
* Check that the device NVRAM is valid by reading
* the magic value at offset 0.
*/
if ((rc = bce_nvram_read(sc, 0, data, 4)) != 0)
goto bce_nvram_test_done;
magic = bce_be32toh(buf[0]);
if (magic != BCE_NVRAM_MAGIC) {
rc = ENODEV;
BCE_PRINTF(sc, "%s(%d): Invalid NVRAM magic value! Expected: 0x%08X, "
"Found: 0x%08X\n",
__FILE__, __LINE__, BCE_NVRAM_MAGIC, magic);
goto bce_nvram_test_done;
}
/*
* Verify that the device NVRAM includes valid
* configuration data.
*/
if ((rc = bce_nvram_read(sc, 0x100, data, BCE_NVRAM_SIZE)) != 0)
goto bce_nvram_test_done;
csum = ether_crc32_le(data, 0x100);
if (csum != BCE_CRC32_RESIDUAL) {
rc = ENODEV;
BCE_PRINTF(sc, "%s(%d): Invalid Manufacturing Information NVRAM CRC! "
"Expected: 0x%08X, Found: 0x%08X\n",
__FILE__, __LINE__, BCE_CRC32_RESIDUAL, csum);
goto bce_nvram_test_done;
}
csum = ether_crc32_le(data + 0x100, 0x100);
if (csum != BCE_CRC32_RESIDUAL) {
BCE_PRINTF(sc, "%s(%d): Invalid Feature Configuration Information "
"NVRAM CRC! Expected: 0x%08X, Found: 08%08X\n",
__FILE__, __LINE__, BCE_CRC32_RESIDUAL, csum);
rc = ENODEV;
}
bce_nvram_test_done:
return rc;
}
/****************************************************************************/
/* Free any DMA memory owned by the driver. */
/* */
/* Scans through each data structre that requires DMA memory and frees */
/* the memory if allocated. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_dma_free(struct bce_softc *sc)
{
int i;
DBPRINT(sc,BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Destroy the status block. */
if (sc->status_block != NULL)
bus_dmamem_free(
sc->status_tag,
sc->status_block,
sc->status_map);
if (sc->status_map != NULL) {
bus_dmamap_unload(
sc->status_tag,
sc->status_map);
bus_dmamap_destroy(sc->status_tag,
sc->status_map);
}
if (sc->status_tag != NULL)
bus_dma_tag_destroy(sc->status_tag);
/* Destroy the statistics block. */
if (sc->stats_block != NULL)
bus_dmamem_free(
sc->stats_tag,
sc->stats_block,
sc->stats_map);
if (sc->stats_map != NULL) {
bus_dmamap_unload(
sc->stats_tag,
sc->stats_map);
bus_dmamap_destroy(sc->stats_tag,
sc->stats_map);
}
if (sc->stats_tag != NULL)
bus_dma_tag_destroy(sc->stats_tag);
/* Free, unmap and destroy all TX buffer descriptor chain pages. */
for (i = 0; i < TX_PAGES; i++ ) {
if (sc->tx_bd_chain[i] != NULL)
bus_dmamem_free(
sc->tx_bd_chain_tag,
sc->tx_bd_chain[i],
sc->tx_bd_chain_map[i]);
if (sc->tx_bd_chain_map[i] != NULL) {
bus_dmamap_unload(
sc->tx_bd_chain_tag,
sc->tx_bd_chain_map[i]);
bus_dmamap_destroy(
sc->tx_bd_chain_tag,
sc->tx_bd_chain_map[i]);
}
}
/* Destroy the TX buffer descriptor tag. */
if (sc->tx_bd_chain_tag != NULL)
bus_dma_tag_destroy(sc->tx_bd_chain_tag);
/* Free, unmap and destroy all RX buffer descriptor chain pages. */
for (i = 0; i < RX_PAGES; i++ ) {
if (sc->rx_bd_chain[i] != NULL)
bus_dmamem_free(
sc->rx_bd_chain_tag,
sc->rx_bd_chain[i],
sc->rx_bd_chain_map[i]);
if (sc->rx_bd_chain_map[i] != NULL) {
bus_dmamap_unload(
sc->rx_bd_chain_tag,
sc->rx_bd_chain_map[i]);
bus_dmamap_destroy(
sc->rx_bd_chain_tag,
sc->rx_bd_chain_map[i]);
}
}
/* Destroy the RX buffer descriptor tag. */
if (sc->rx_bd_chain_tag != NULL)
bus_dma_tag_destroy(sc->rx_bd_chain_tag);
/* Unload and destroy the TX mbuf maps. */
for (i = 0; i < TOTAL_TX_BD; i++) {
if (sc->tx_mbuf_map[i] != NULL) {
bus_dmamap_unload(sc->tx_mbuf_tag,
sc->tx_mbuf_map[i]);
bus_dmamap_destroy(sc->tx_mbuf_tag,
sc->tx_mbuf_map[i]);
}
}
/* Destroy the TX mbuf tag. */
if (sc->tx_mbuf_tag != NULL)
bus_dma_tag_destroy(sc->tx_mbuf_tag);
/* Unload and destroy the RX mbuf maps. */
for (i = 0; i < TOTAL_RX_BD; i++) {
if (sc->rx_mbuf_map[i] != NULL) {
bus_dmamap_unload(sc->rx_mbuf_tag,
sc->rx_mbuf_map[i]);
bus_dmamap_destroy(sc->rx_mbuf_tag,
sc->rx_mbuf_map[i]);
}
}
/* Destroy the RX mbuf tag. */
if (sc->rx_mbuf_tag != NULL)
bus_dma_tag_destroy(sc->rx_mbuf_tag);
/* Destroy the parent tag */
if (sc->parent_tag != NULL)
bus_dma_tag_destroy(sc->parent_tag);
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Get DMA memory from the OS. */
/* */
/* Validates that the OS has provided DMA buffers in response to a */
/* bus_dmamap_load() call and saves the physical address of those buffers. */
/* When the callback is used the OS will return 0 for the mapping function */
/* (bus_dmamap_load()) so we use the value of map_arg->maxsegs to pass any */
/* failures back to the caller. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct bce_dmamap_arg *map_arg = arg;
struct bce_softc *sc = map_arg->sc;
/* Simulate a mapping failure. */
DBRUNIF(DB_RANDOMTRUE(bce_debug_dma_map_addr_failure),
BCE_PRINTF(sc, "%s(%d): Simulating DMA mapping error.\n",
__FILE__, __LINE__);
error = ENOMEM);
/* Check for an error and signal the caller that an error occurred. */
if (error || (nseg > map_arg->maxsegs)) {
BCE_PRINTF(sc, "%s(%d): DMA mapping error! error = %d, "
"nseg = %d, maxsegs = %d\n",
__FILE__, __LINE__, error, nseg, map_arg->maxsegs);
map_arg->maxsegs = 0;
goto bce_dma_map_addr_exit;
}
map_arg->busaddr = segs->ds_addr;
bce_dma_map_addr_exit:
return;
}
/****************************************************************************/
/* Map TX buffers into TX buffer descriptors. */
/* */
/* Given a series of DMA memory containting an outgoing frame, map the */
/* segments into the tx_bd structure used by the hardware. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_dma_map_tx_desc(void *arg, bus_dma_segment_t *segs,
int nseg, bus_size_t mapsize, int error)
{
struct bce_dmamap_arg *map_arg;
struct bce_softc *sc;
struct tx_bd *txbd = NULL;
int i = 0;
u16 prod, chain_prod;
u32 prod_bseq;
#ifdef BCE_DEBUG
u16 debug_prod;
#endif
map_arg = arg;
sc = map_arg->sc;
if (error) {
DBPRINT(sc, BCE_WARN, "%s(): Called with error = %d\n",
__FUNCTION__, error);
return;
}
/* Signal error to caller if there's too many segments */
if (nseg > map_arg->maxsegs) {
DBPRINT(sc, BCE_WARN,
"%s(): Mapped TX descriptors: max segs = %d, "
"actual segs = %d\n",
__FUNCTION__, map_arg->maxsegs, nseg);
map_arg->maxsegs = 0;
return;
}
/* prod points to an empty tx_bd at this point. */
prod = map_arg->prod;
chain_prod = map_arg->chain_prod;
prod_bseq = map_arg->prod_bseq;
#ifdef BCE_DEBUG
debug_prod = chain_prod;
#endif
DBPRINT(sc, BCE_INFO_SEND,
"%s(): Start: prod = 0x%04X, chain_prod = %04X, "
"prod_bseq = 0x%08X\n",
__FUNCTION__, prod, chain_prod, prod_bseq);
/*
* Cycle through each mbuf segment that makes up
* the outgoing frame, gathering the mapping info
* for that segment and creating a tx_bd to for
* the mbuf.
*/
txbd = &map_arg->tx_chain[TX_PAGE(chain_prod)][TX_IDX(chain_prod)];
/* Setup the first tx_bd for the first segment. */
txbd->tx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[i].ds_addr));
txbd->tx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[i].ds_addr));
txbd->tx_bd_mss_nbytes = htole16(segs[i].ds_len);
txbd->tx_bd_vlan_tag_flags = htole16(map_arg->tx_flags |
TX_BD_FLAGS_START);
prod_bseq += segs[i].ds_len;
/* Setup any remaing segments. */
for (i = 1; i < nseg; i++) {
prod = NEXT_TX_BD(prod);
chain_prod = TX_CHAIN_IDX(prod);
txbd = &map_arg->tx_chain[TX_PAGE(chain_prod)][TX_IDX(chain_prod)];
txbd->tx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[i].ds_addr));
txbd->tx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[i].ds_addr));
txbd->tx_bd_mss_nbytes = htole16(segs[i].ds_len);
txbd->tx_bd_vlan_tag_flags = htole16(map_arg->tx_flags);
prod_bseq += segs[i].ds_len;
}
/* Set the END flag on the last TX buffer descriptor. */
txbd->tx_bd_vlan_tag_flags |= htole16(TX_BD_FLAGS_END);
DBRUN(BCE_INFO_SEND, bce_dump_tx_chain(sc, debug_prod, nseg));
DBPRINT(sc, BCE_INFO_SEND,
"%s(): End: prod = 0x%04X, chain_prod = %04X, "
"prod_bseq = 0x%08X\n",
__FUNCTION__, prod, chain_prod, prod_bseq);
/* prod points to the last tx_bd at this point. */
map_arg->maxsegs = nseg;
map_arg->prod = prod;
map_arg->chain_prod = chain_prod;
map_arg->prod_bseq = prod_bseq;
}
/****************************************************************************/
/* Allocate any DMA memory needed by the driver. */
/* */
/* Allocates DMA memory needed for the various global structures needed by */
/* hardware. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_dma_alloc(device_t dev)
{
struct bce_softc *sc;
int i, error, rc = 0;
struct bce_dmamap_arg map_arg;
sc = device_get_softc(dev);
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/*
* Allocate the parent bus DMA tag appropriate for PCI.
*/
if (bus_dma_tag_create(NULL, /* parent */
BCE_DMA_ALIGN, /* alignment */
BCE_DMA_BOUNDARY, /* boundary */
sc->max_bus_addr, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, /* filterfunc */
NULL, /* filterarg */
MAXBSIZE, /* maxsize */
BUS_SPACE_UNRESTRICTED, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
NULL, /* locfunc */
NULL, /* lockarg */
&sc->parent_tag)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate parent DMA tag!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
/*
* Create a DMA tag for the status block, allocate and clear the
* memory, map the memory into DMA space, and fetch the physical
* address of the block.
*/
if (bus_dma_tag_create(
sc->parent_tag, /* parent */
BCE_DMA_ALIGN, /* alignment */
BCE_DMA_BOUNDARY, /* boundary */
sc->max_bus_addr, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, /* filterfunc */
NULL, /* filterarg */
BCE_STATUS_BLK_SZ, /* maxsize */
1, /* nsegments */
BCE_STATUS_BLK_SZ, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
&sc->status_tag)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate status block DMA tag!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
if(bus_dmamem_alloc(
sc->status_tag, /* dmat */
(void **)&sc->status_block, /* vaddr */
BUS_DMA_NOWAIT, /* flags */
&sc->status_map)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate status block DMA memory!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
bzero((char *)sc->status_block, BCE_STATUS_BLK_SZ);
map_arg.sc = sc;
map_arg.maxsegs = 1;
error = bus_dmamap_load(
sc->status_tag, /* dmat */
sc->status_map, /* map */
sc->status_block, /* buf */
BCE_STATUS_BLK_SZ, /* buflen */
bce_dma_map_addr, /* callback */
&map_arg, /* callbackarg */
BUS_DMA_NOWAIT); /* flags */
if(error || (map_arg.maxsegs == 0)) {
BCE_PRINTF(sc, "%s(%d): Could not map status block DMA memory!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
sc->status_block_paddr = map_arg.busaddr;
/* DRC - Fix for 64 bit addresses. */
DBPRINT(sc, BCE_INFO, "status_block_paddr = 0x%08X\n",
(u32) sc->status_block_paddr);
/*
* Create a DMA tag for the statistics block, allocate and clear the
* memory, map the memory into DMA space, and fetch the physical
* address of the block.
*/
if (bus_dma_tag_create(
sc->parent_tag, /* parent */
BCE_DMA_ALIGN, /* alignment */
BCE_DMA_BOUNDARY, /* boundary */
sc->max_bus_addr, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, /* filterfunc */
NULL, /* filterarg */
BCE_STATS_BLK_SZ, /* maxsize */
1, /* nsegments */
BCE_STATS_BLK_SZ, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
&sc->stats_tag)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate statistics block DMA tag!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
if (bus_dmamem_alloc(
sc->stats_tag, /* dmat */
(void **)&sc->stats_block, /* vaddr */
BUS_DMA_NOWAIT, /* flags */
&sc->stats_map)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate statistics block DMA memory!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
bzero((char *)sc->stats_block, BCE_STATS_BLK_SZ);
map_arg.sc = sc;
map_arg.maxsegs = 1;
error = bus_dmamap_load(
sc->stats_tag, /* dmat */
sc->stats_map, /* map */
sc->stats_block, /* buf */
BCE_STATS_BLK_SZ, /* buflen */
bce_dma_map_addr, /* callback */
&map_arg, /* callbackarg */
BUS_DMA_NOWAIT); /* flags */
if(error || (map_arg.maxsegs == 0)) {
BCE_PRINTF(sc, "%s(%d): Could not map statistics block DMA memory!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
sc->stats_block_paddr = map_arg.busaddr;
/* DRC - Fix for 64 bit address. */
DBPRINT(sc,BCE_INFO, "stats_block_paddr = 0x%08X\n",
(u32) sc->stats_block_paddr);
/*
* Create a DMA tag for the TX buffer descriptor chain,
* allocate and clear the memory, and fetch the
* physical address of the block.
*/
if(bus_dma_tag_create(
sc->parent_tag, /* parent */
BCM_PAGE_SIZE, /* alignment */
BCE_DMA_BOUNDARY, /* boundary */
sc->max_bus_addr, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, /* filterfunc */
NULL, /* filterarg */
BCE_TX_CHAIN_PAGE_SZ, /* maxsize */
1, /* nsegments */
BCE_TX_CHAIN_PAGE_SZ, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
&sc->tx_bd_chain_tag)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate TX descriptor chain DMA tag!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
for (i = 0; i < TX_PAGES; i++) {
if(bus_dmamem_alloc(
sc->tx_bd_chain_tag, /* tag */
(void **)&sc->tx_bd_chain[i], /* vaddr */
BUS_DMA_NOWAIT, /* flags */
&sc->tx_bd_chain_map[i])) {
BCE_PRINTF(sc, "%s(%d): Could not allocate TX descriptor "
"chain DMA memory!\n", __FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
map_arg.maxsegs = 1;
map_arg.sc = sc;
error = bus_dmamap_load(
sc->tx_bd_chain_tag, /* dmat */
sc->tx_bd_chain_map[i], /* map */
sc->tx_bd_chain[i], /* buf */
BCE_TX_CHAIN_PAGE_SZ, /* buflen */
bce_dma_map_addr, /* callback */
&map_arg, /* callbackarg */
BUS_DMA_NOWAIT); /* flags */
if(error || (map_arg.maxsegs == 0)) {
BCE_PRINTF(sc, "%s(%d): Could not map TX descriptor chain DMA memory!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
sc->tx_bd_chain_paddr[i] = map_arg.busaddr;
/* DRC - Fix for 64 bit systems. */
DBPRINT(sc, BCE_INFO, "tx_bd_chain_paddr[%d] = 0x%08X\n",
i, (u32) sc->tx_bd_chain_paddr[i]);
}
/* Create a DMA tag for TX mbufs. */
if (bus_dma_tag_create(
sc->parent_tag, /* parent */
BCE_DMA_ALIGN, /* alignment */
BCE_DMA_BOUNDARY, /* boundary */
sc->max_bus_addr, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, /* filterfunc */
NULL, /* filterarg */
MCLBYTES * BCE_MAX_SEGMENTS, /* maxsize */
BCE_MAX_SEGMENTS, /* nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
&sc->tx_mbuf_tag)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate TX mbuf DMA tag!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
/* Create DMA maps for the TX mbufs clusters. */
for (i = 0; i < TOTAL_TX_BD; i++) {
if (bus_dmamap_create(sc->tx_mbuf_tag, BUS_DMA_NOWAIT,
&sc->tx_mbuf_map[i])) {
BCE_PRINTF(sc, "%s(%d): Unable to create TX mbuf DMA map!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
}
/*
* Create a DMA tag for the RX buffer descriptor chain,
* allocate and clear the memory, and fetch the physical
* address of the blocks.
*/
if (bus_dma_tag_create(
sc->parent_tag, /* parent */
BCM_PAGE_SIZE, /* alignment */
BCE_DMA_BOUNDARY, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
sc->max_bus_addr, /* lowaddr */
NULL, /* filter */
NULL, /* filterarg */
BCE_RX_CHAIN_PAGE_SZ, /* maxsize */
1, /* nsegments */
BCE_RX_CHAIN_PAGE_SZ, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
&sc->rx_bd_chain_tag)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate RX descriptor chain DMA tag!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
for (i = 0; i < RX_PAGES; i++) {
if (bus_dmamem_alloc(
sc->rx_bd_chain_tag, /* tag */
(void **)&sc->rx_bd_chain[i], /* vaddr */
BUS_DMA_NOWAIT, /* flags */
&sc->rx_bd_chain_map[i])) {
BCE_PRINTF(sc, "%s(%d): Could not allocate RX descriptor chain "
"DMA memory!\n", __FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
bzero((char *)sc->rx_bd_chain[i], BCE_RX_CHAIN_PAGE_SZ);
map_arg.maxsegs = 1;
map_arg.sc = sc;
error = bus_dmamap_load(
sc->rx_bd_chain_tag, /* dmat */
sc->rx_bd_chain_map[i], /* map */
sc->rx_bd_chain[i], /* buf */
BCE_RX_CHAIN_PAGE_SZ, /* buflen */
bce_dma_map_addr, /* callback */
&map_arg, /* callbackarg */
BUS_DMA_NOWAIT); /* flags */
if(error || (map_arg.maxsegs == 0)) {
BCE_PRINTF(sc, "%s(%d): Could not map RX descriptor chain DMA memory!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
sc->rx_bd_chain_paddr[i] = map_arg.busaddr;
/* DRC - Fix for 64 bit systems. */
DBPRINT(sc, BCE_INFO, "rx_bd_chain_paddr[%d] = 0x%08X\n",
i, (u32) sc->rx_bd_chain_paddr[i]);
}
/*
* Create a DMA tag for RX mbufs.
*/
if (bus_dma_tag_create(
sc->parent_tag, /* parent */
BCE_DMA_ALIGN, /* alignment */
BCE_DMA_BOUNDARY, /* boundary */
sc->max_bus_addr, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, /* filterfunc */
NULL, /* filterarg */
MJUM9BYTES, /* maxsize */
BCE_MAX_SEGMENTS, /* nsegments */
MJUM9BYTES, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
&sc->rx_mbuf_tag)) {
BCE_PRINTF(sc, "%s(%d): Could not allocate RX mbuf DMA tag!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
/* Create DMA maps for the RX mbuf clusters. */
for (i = 0; i < TOTAL_RX_BD; i++) {
if (bus_dmamap_create(sc->rx_mbuf_tag, BUS_DMA_NOWAIT,
&sc->rx_mbuf_map[i])) {
BCE_PRINTF(sc, "%s(%d): Unable to create RX mbuf DMA map!\n",
__FILE__, __LINE__);
rc = ENOMEM;
goto bce_dma_alloc_exit;
}
}
bce_dma_alloc_exit:
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Release all resources used by the driver. */
/* */
/* Releases all resources acquired by the driver including interrupts, */
/* interrupt handler, interfaces, mutexes, and DMA memory. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_release_resources(struct bce_softc *sc)
{
device_t dev;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
dev = sc->bce_dev;
bce_dma_free(sc);
if (sc->bce_intrhand != NULL)
bus_teardown_intr(dev, sc->bce_irq, sc->bce_intrhand);
if (sc->bce_irq != NULL)
bus_release_resource(dev,
SYS_RES_IRQ,
0,
sc->bce_irq);
if (sc->bce_res != NULL)
bus_release_resource(dev,
SYS_RES_MEMORY,
PCIR_BAR(0),
sc->bce_res);
if (sc->bce_ifp != NULL)
if_free(sc->bce_ifp);
if (mtx_initialized(&sc->bce_mtx))
BCE_LOCK_DESTROY(sc);
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Firmware synchronization. */
/* */
/* Before performing certain events such as a chip reset, synchronize with */
/* the firmware first. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_fw_sync(struct bce_softc *sc, u32 msg_data)
{
int i, rc = 0;
u32 val;
/* Don't waste any time if we've timed out before. */
if (sc->bce_fw_timed_out) {
rc = EBUSY;
goto bce_fw_sync_exit;
}
/* Increment the message sequence number. */
sc->bce_fw_wr_seq++;
msg_data |= sc->bce_fw_wr_seq;
DBPRINT(sc, BCE_VERBOSE, "bce_fw_sync(): msg_data = 0x%08X\n", msg_data);
/* Send the message to the bootcode driver mailbox. */
REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_MB, msg_data);
/* Wait for the bootcode to acknowledge the message. */
for (i = 0; i < FW_ACK_TIME_OUT_MS; i++) {
/* Check for a response in the bootcode firmware mailbox. */
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_FW_MB);
if ((val & BCE_FW_MSG_ACK) == (msg_data & BCE_DRV_MSG_SEQ))
break;
DELAY(1000);
}
/* If we've timed out, tell the bootcode that we've stopped waiting. */
if (((val & BCE_FW_MSG_ACK) != (msg_data & BCE_DRV_MSG_SEQ)) &&
((msg_data & BCE_DRV_MSG_DATA) != BCE_DRV_MSG_DATA_WAIT0)) {
BCE_PRINTF(sc, "%s(%d): Firmware synchronization timeout! "
"msg_data = 0x%08X\n",
__FILE__, __LINE__, msg_data);
msg_data &= ~BCE_DRV_MSG_CODE;
msg_data |= BCE_DRV_MSG_CODE_FW_TIMEOUT;
REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_MB, msg_data);
sc->bce_fw_timed_out = 1;
rc = EBUSY;
}
bce_fw_sync_exit:
return (rc);
}
/****************************************************************************/
/* Load Receive Virtual 2 Physical (RV2P) processor firmware. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_load_rv2p_fw(struct bce_softc *sc, u32 *rv2p_code,
u32 rv2p_code_len, u32 rv2p_proc)
{
int i;
u32 val;
for (i = 0; i < rv2p_code_len; i += 8) {
REG_WR(sc, BCE_RV2P_INSTR_HIGH, *rv2p_code);
rv2p_code++;
REG_WR(sc, BCE_RV2P_INSTR_LOW, *rv2p_code);
rv2p_code++;
if (rv2p_proc == RV2P_PROC1) {
val = (i / 8) | BCE_RV2P_PROC1_ADDR_CMD_RDWR;
REG_WR(sc, BCE_RV2P_PROC1_ADDR_CMD, val);
}
else {
val = (i / 8) | BCE_RV2P_PROC2_ADDR_CMD_RDWR;
REG_WR(sc, BCE_RV2P_PROC2_ADDR_CMD, val);
}
}
/* Reset the processor, un-stall is done later. */
if (rv2p_proc == RV2P_PROC1) {
REG_WR(sc, BCE_RV2P_COMMAND, BCE_RV2P_COMMAND_PROC1_RESET);
}
else {
REG_WR(sc, BCE_RV2P_COMMAND, BCE_RV2P_COMMAND_PROC2_RESET);
}
}
/****************************************************************************/
/* Load RISC processor firmware. */
/* */
/* Loads firmware from the file if_bcefw.h into the scratchpad memory */
/* associated with a particular processor. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_load_cpu_fw(struct bce_softc *sc, struct cpu_reg *cpu_reg,
struct fw_info *fw)
{
u32 offset;
u32 val;
/* Halt the CPU. */
val = REG_RD_IND(sc, cpu_reg->mode);
val |= cpu_reg->mode_value_halt;
REG_WR_IND(sc, cpu_reg->mode, val);
REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear);
/* Load the Text area. */
offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base);
if (fw->text) {
int j;
for (j = 0; j < (fw->text_len / 4); j++, offset += 4) {
REG_WR_IND(sc, offset, fw->text[j]);
}
}
/* Load the Data area. */
offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base);
if (fw->data) {
int j;
for (j = 0; j < (fw->data_len / 4); j++, offset += 4) {
REG_WR_IND(sc, offset, fw->data[j]);
}
}
/* Load the SBSS area. */
offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base);
if (fw->sbss) {
int j;
for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) {
REG_WR_IND(sc, offset, fw->sbss[j]);
}
}
/* Load the BSS area. */
offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base);
if (fw->bss) {
int j;
for (j = 0; j < (fw->bss_len/4); j++, offset += 4) {
REG_WR_IND(sc, offset, fw->bss[j]);
}
}
/* Load the Read-Only area. */
offset = cpu_reg->spad_base +
(fw->rodata_addr - cpu_reg->mips_view_base);
if (fw->rodata) {
int j;
for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) {
REG_WR_IND(sc, offset, fw->rodata[j]);
}
}
/* Clear the pre-fetch instruction. */
REG_WR_IND(sc, cpu_reg->inst, 0);
REG_WR_IND(sc, cpu_reg->pc, fw->start_addr);
/* Start the CPU. */
val = REG_RD_IND(sc, cpu_reg->mode);
val &= ~cpu_reg->mode_value_halt;
REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear);
REG_WR_IND(sc, cpu_reg->mode, val);
}
/****************************************************************************/
/* Initialize the RV2P, RX, TX, TPAT, and COM CPUs. */
/* */
/* Loads the firmware for each CPU and starts the CPU. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_init_cpus(struct bce_softc *sc)
{
struct cpu_reg cpu_reg;
struct fw_info fw;
/* Initialize the RV2P processor. */
bce_load_rv2p_fw(sc, bce_rv2p_proc1, sizeof(bce_rv2p_proc1), RV2P_PROC1);
bce_load_rv2p_fw(sc, bce_rv2p_proc2, sizeof(bce_rv2p_proc2), RV2P_PROC2);
/* Initialize the RX Processor. */
cpu_reg.mode = BCE_RXP_CPU_MODE;
cpu_reg.mode_value_halt = BCE_RXP_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BCE_RXP_CPU_MODE_STEP_ENA;
cpu_reg.state = BCE_RXP_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BCE_RXP_CPU_REG_FILE;
cpu_reg.evmask = BCE_RXP_CPU_EVENT_MASK;
cpu_reg.pc = BCE_RXP_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BCE_RXP_CPU_INSTRUCTION;
cpu_reg.bp = BCE_RXP_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BCE_RXP_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
fw.ver_major = bce_RXP_b06FwReleaseMajor;
fw.ver_minor = bce_RXP_b06FwReleaseMinor;
fw.ver_fix = bce_RXP_b06FwReleaseFix;
fw.start_addr = bce_RXP_b06FwStartAddr;
fw.text_addr = bce_RXP_b06FwTextAddr;
fw.text_len = bce_RXP_b06FwTextLen;
fw.text_index = 0;
fw.text = bce_RXP_b06FwText;
fw.data_addr = bce_RXP_b06FwDataAddr;
fw.data_len = bce_RXP_b06FwDataLen;
fw.data_index = 0;
fw.data = bce_RXP_b06FwData;
fw.sbss_addr = bce_RXP_b06FwSbssAddr;
fw.sbss_len = bce_RXP_b06FwSbssLen;
fw.sbss_index = 0;
fw.sbss = bce_RXP_b06FwSbss;
fw.bss_addr = bce_RXP_b06FwBssAddr;
fw.bss_len = bce_RXP_b06FwBssLen;
fw.bss_index = 0;
fw.bss = bce_RXP_b06FwBss;
fw.rodata_addr = bce_RXP_b06FwRodataAddr;
fw.rodata_len = bce_RXP_b06FwRodataLen;
fw.rodata_index = 0;
fw.rodata = bce_RXP_b06FwRodata;
DBPRINT(sc, BCE_INFO_RESET, "Loading RX firmware.\n");
bce_load_cpu_fw(sc, &cpu_reg, &fw);
/* Initialize the TX Processor. */
cpu_reg.mode = BCE_TXP_CPU_MODE;
cpu_reg.mode_value_halt = BCE_TXP_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BCE_TXP_CPU_MODE_STEP_ENA;
cpu_reg.state = BCE_TXP_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BCE_TXP_CPU_REG_FILE;
cpu_reg.evmask = BCE_TXP_CPU_EVENT_MASK;
cpu_reg.pc = BCE_TXP_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BCE_TXP_CPU_INSTRUCTION;
cpu_reg.bp = BCE_TXP_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BCE_TXP_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
fw.ver_major = bce_TXP_b06FwReleaseMajor;
fw.ver_minor = bce_TXP_b06FwReleaseMinor;
fw.ver_fix = bce_TXP_b06FwReleaseFix;
fw.start_addr = bce_TXP_b06FwStartAddr;
fw.text_addr = bce_TXP_b06FwTextAddr;
fw.text_len = bce_TXP_b06FwTextLen;
fw.text_index = 0;
fw.text = bce_TXP_b06FwText;
fw.data_addr = bce_TXP_b06FwDataAddr;
fw.data_len = bce_TXP_b06FwDataLen;
fw.data_index = 0;
fw.data = bce_TXP_b06FwData;
fw.sbss_addr = bce_TXP_b06FwSbssAddr;
fw.sbss_len = bce_TXP_b06FwSbssLen;
fw.sbss_index = 0;
fw.sbss = bce_TXP_b06FwSbss;
fw.bss_addr = bce_TXP_b06FwBssAddr;
fw.bss_len = bce_TXP_b06FwBssLen;
fw.bss_index = 0;
fw.bss = bce_TXP_b06FwBss;
fw.rodata_addr = bce_TXP_b06FwRodataAddr;
fw.rodata_len = bce_TXP_b06FwRodataLen;
fw.rodata_index = 0;
fw.rodata = bce_TXP_b06FwRodata;
DBPRINT(sc, BCE_INFO_RESET, "Loading TX firmware.\n");
bce_load_cpu_fw(sc, &cpu_reg, &fw);
/* Initialize the TX Patch-up Processor. */
cpu_reg.mode = BCE_TPAT_CPU_MODE;
cpu_reg.mode_value_halt = BCE_TPAT_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BCE_TPAT_CPU_MODE_STEP_ENA;
cpu_reg.state = BCE_TPAT_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BCE_TPAT_CPU_REG_FILE;
cpu_reg.evmask = BCE_TPAT_CPU_EVENT_MASK;
cpu_reg.pc = BCE_TPAT_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BCE_TPAT_CPU_INSTRUCTION;
cpu_reg.bp = BCE_TPAT_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BCE_TPAT_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
fw.ver_major = bce_TPAT_b06FwReleaseMajor;
fw.ver_minor = bce_TPAT_b06FwReleaseMinor;
fw.ver_fix = bce_TPAT_b06FwReleaseFix;
fw.start_addr = bce_TPAT_b06FwStartAddr;
fw.text_addr = bce_TPAT_b06FwTextAddr;
fw.text_len = bce_TPAT_b06FwTextLen;
fw.text_index = 0;
fw.text = bce_TPAT_b06FwText;
fw.data_addr = bce_TPAT_b06FwDataAddr;
fw.data_len = bce_TPAT_b06FwDataLen;
fw.data_index = 0;
fw.data = bce_TPAT_b06FwData;
fw.sbss_addr = bce_TPAT_b06FwSbssAddr;
fw.sbss_len = bce_TPAT_b06FwSbssLen;
fw.sbss_index = 0;
fw.sbss = bce_TPAT_b06FwSbss;
fw.bss_addr = bce_TPAT_b06FwBssAddr;
fw.bss_len = bce_TPAT_b06FwBssLen;
fw.bss_index = 0;
fw.bss = bce_TPAT_b06FwBss;
fw.rodata_addr = bce_TPAT_b06FwRodataAddr;
fw.rodata_len = bce_TPAT_b06FwRodataLen;
fw.rodata_index = 0;
fw.rodata = bce_TPAT_b06FwRodata;
DBPRINT(sc, BCE_INFO_RESET, "Loading TPAT firmware.\n");
bce_load_cpu_fw(sc, &cpu_reg, &fw);
/* Initialize the Completion Processor. */
cpu_reg.mode = BCE_COM_CPU_MODE;
cpu_reg.mode_value_halt = BCE_COM_CPU_MODE_SOFT_HALT;
cpu_reg.mode_value_sstep = BCE_COM_CPU_MODE_STEP_ENA;
cpu_reg.state = BCE_COM_CPU_STATE;
cpu_reg.state_value_clear = 0xffffff;
cpu_reg.gpr0 = BCE_COM_CPU_REG_FILE;
cpu_reg.evmask = BCE_COM_CPU_EVENT_MASK;
cpu_reg.pc = BCE_COM_CPU_PROGRAM_COUNTER;
cpu_reg.inst = BCE_COM_CPU_INSTRUCTION;
cpu_reg.bp = BCE_COM_CPU_HW_BREAKPOINT;
cpu_reg.spad_base = BCE_COM_SCRATCH;
cpu_reg.mips_view_base = 0x8000000;
fw.ver_major = bce_COM_b06FwReleaseMajor;
fw.ver_minor = bce_COM_b06FwReleaseMinor;
fw.ver_fix = bce_COM_b06FwReleaseFix;
fw.start_addr = bce_COM_b06FwStartAddr;
fw.text_addr = bce_COM_b06FwTextAddr;
fw.text_len = bce_COM_b06FwTextLen;
fw.text_index = 0;
fw.text = bce_COM_b06FwText;
fw.data_addr = bce_COM_b06FwDataAddr;
fw.data_len = bce_COM_b06FwDataLen;
fw.data_index = 0;
fw.data = bce_COM_b06FwData;
fw.sbss_addr = bce_COM_b06FwSbssAddr;
fw.sbss_len = bce_COM_b06FwSbssLen;
fw.sbss_index = 0;
fw.sbss = bce_COM_b06FwSbss;
fw.bss_addr = bce_COM_b06FwBssAddr;
fw.bss_len = bce_COM_b06FwBssLen;
fw.bss_index = 0;
fw.bss = bce_COM_b06FwBss;
fw.rodata_addr = bce_COM_b06FwRodataAddr;
fw.rodata_len = bce_COM_b06FwRodataLen;
fw.rodata_index = 0;
fw.rodata = bce_COM_b06FwRodata;
DBPRINT(sc, BCE_INFO_RESET, "Loading COM firmware.\n");
bce_load_cpu_fw(sc, &cpu_reg, &fw);
}
/****************************************************************************/
/* Initialize context memory. */
/* */
/* Clears the memory associated with each Context ID (CID). */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_init_context(struct bce_softc *sc)
{
u32 vcid;
vcid = 96;
while (vcid) {
u32 vcid_addr, pcid_addr, offset;
vcid--;
vcid_addr = GET_CID_ADDR(vcid);
pcid_addr = vcid_addr;
REG_WR(sc, BCE_CTX_VIRT_ADDR, 0x00);
REG_WR(sc, BCE_CTX_PAGE_TBL, pcid_addr);
/* Zero out the context. */
for (offset = 0; offset < PHY_CTX_SIZE; offset += 4) {
CTX_WR(sc, 0x00, offset, 0);
}
REG_WR(sc, BCE_CTX_VIRT_ADDR, vcid_addr);
REG_WR(sc, BCE_CTX_PAGE_TBL, pcid_addr);
}
}
/****************************************************************************/
/* Fetch the permanent MAC address of the controller. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_get_mac_addr(struct bce_softc *sc)
{
u32 mac_lo = 0, mac_hi = 0;
/*
* The NetXtreme II bootcode populates various NIC
* power-on and runtime configuration items in a
* shared memory area. The factory configured MAC
* address is available from both NVRAM and the
* shared memory area so we'll read the value from
* shared memory for speed.
*/
mac_hi = REG_RD_IND(sc, sc->bce_shmem_base +
BCE_PORT_HW_CFG_MAC_UPPER);
mac_lo = REG_RD_IND(sc, sc->bce_shmem_base +
BCE_PORT_HW_CFG_MAC_LOWER);
if ((mac_lo == 0) && (mac_hi == 0)) {
BCE_PRINTF(sc, "%s(%d): Invalid Ethernet address!\n",
__FILE__, __LINE__);
} else {
sc->eaddr[0] = (u_char)(mac_hi >> 8);
sc->eaddr[1] = (u_char)(mac_hi >> 0);
sc->eaddr[2] = (u_char)(mac_lo >> 24);
sc->eaddr[3] = (u_char)(mac_lo >> 16);
sc->eaddr[4] = (u_char)(mac_lo >> 8);
sc->eaddr[5] = (u_char)(mac_lo >> 0);
}
DBPRINT(sc, BCE_INFO, "Permanent Ethernet address = %6D\n", sc->eaddr, ":");
}
/****************************************************************************/
/* Program the MAC address. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_set_mac_addr(struct bce_softc *sc)
{
u32 val;
u8 *mac_addr = sc->eaddr;
DBPRINT(sc, BCE_INFO, "Setting Ethernet address = %6D\n", sc->eaddr, ":");
val = (mac_addr[0] << 8) | mac_addr[1];
REG_WR(sc, BCE_EMAC_MAC_MATCH0, val);
val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
(mac_addr[4] << 8) | mac_addr[5];
REG_WR(sc, BCE_EMAC_MAC_MATCH1, val);
}
/****************************************************************************/
/* Stop the controller. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_stop(struct bce_softc *sc)
{
struct ifnet *ifp;
struct ifmedia_entry *ifm;
struct mii_data *mii = NULL;
int mtmp, itmp;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
BCE_LOCK_ASSERT(sc);
ifp = sc->bce_ifp;
mii = device_get_softc(sc->bce_miibus);
callout_stop(&sc->bce_stat_ch);
/* Disable the transmit/receive blocks. */
REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS, 0x5ffffff);
REG_RD(sc, BCE_MISC_ENABLE_CLR_BITS);
DELAY(20);
bce_disable_intr(sc);
/* Tell firmware that the driver is going away. */
bce_reset(sc, BCE_DRV_MSG_CODE_SUSPEND_NO_WOL);
/* Free the RX lists. */
bce_free_rx_chain(sc);
/* Free TX buffers. */
bce_free_tx_chain(sc);
/*
* Isolate/power down the PHY, but leave the media selection
* unchanged so that things will be put back to normal when
* we bring the interface back up.
*/
itmp = ifp->if_flags;
ifp->if_flags |= IFF_UP;
/*
* If we are called from bce_detach(), mii is already NULL.
*/
if (mii != NULL) {
ifm = mii->mii_media.ifm_cur;
mtmp = ifm->ifm_media;
ifm->ifm_media = IFM_ETHER | IFM_NONE;
mii_mediachg(mii);
ifm->ifm_media = mtmp;
}
ifp->if_flags = itmp;
ifp->if_timer = 0;
sc->bce_link = 0;
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
Add a new 'bce_mgmt_init_locked' function to enable the minimal parts of the chip to let ASF/IPMI firmware to respond to IPMI after attaching and when the chip is down. David looked at it but could really say what they right minimal config. stuff would be. It's not documented. I figured this out via trial and error. Reviewed by: davidch
2006-09-20 18:55:16 +00:00
bce_mgmt_init_locked(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
}
static int
bce_reset(struct bce_softc *sc, u32 reset_code)
{
u32 val;
int i, rc = 0;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Wait for pending PCI transactions to complete. */
REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS,
BCE_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
BCE_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
BCE_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
BCE_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
val = REG_RD(sc, BCE_MISC_ENABLE_CLR_BITS);
DELAY(5);
/* Assume bootcode is running. */
sc->bce_fw_timed_out = 0;
/* Give the firmware a chance to prepare for the reset. */
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT0 | reset_code);
if (rc)
goto bce_reset_exit;
/* Set a firmware reminder that this is a soft reset. */
REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_RESET_SIGNATURE,
BCE_DRV_RESET_SIGNATURE_MAGIC);
/* Dummy read to force the chip to complete all current transactions. */
val = REG_RD(sc, BCE_MISC_ID);
/* Chip reset. */
val = BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
REG_WR(sc, BCE_PCICFG_MISC_CONFIG, val);
/* Allow up to 30us for reset to complete. */
for (i = 0; i < 10; i++) {
val = REG_RD(sc, BCE_PCICFG_MISC_CONFIG);
if ((val & (BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
BCE_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) {
break;
}
DELAY(10);
}
/* Check that reset completed successfully. */
if (val & (BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
BCE_PCICFG_MISC_CONFIG_CORE_RST_BSY)) {
BCE_PRINTF(sc, "%s(%d): Reset failed!\n",
__FILE__, __LINE__);
rc = EBUSY;
goto bce_reset_exit;
}
/* Make sure byte swapping is properly configured. */
val = REG_RD(sc, BCE_PCI_SWAP_DIAG0);
if (val != 0x01020304) {
BCE_PRINTF(sc, "%s(%d): Byte swap is incorrect!\n",
__FILE__, __LINE__);
rc = ENODEV;
goto bce_reset_exit;
}
/* Just completed a reset, assume that firmware is running again. */
sc->bce_fw_timed_out = 0;
/* Wait for the firmware to finish its initialization. */
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT1 | reset_code);
if (rc)
BCE_PRINTF(sc, "%s(%d): Firmware did not complete initialization!\n",
__FILE__, __LINE__);
bce_reset_exit:
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return (rc);
}
static int
bce_chipinit(struct bce_softc *sc)
{
u32 val;
int rc = 0;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Make sure the interrupt is not active. */
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, BCE_PCICFG_INT_ACK_CMD_MASK_INT);
/* Initialize DMA byte/word swapping, configure the number of DMA */
/* channels and PCI clock compensation delay. */
val = BCE_DMA_CONFIG_DATA_BYTE_SWAP |
BCE_DMA_CONFIG_DATA_WORD_SWAP |
#if BYTE_ORDER == BIG_ENDIAN
BCE_DMA_CONFIG_CNTL_BYTE_SWAP |
#endif
BCE_DMA_CONFIG_CNTL_WORD_SWAP |
DMA_READ_CHANS << 12 |
DMA_WRITE_CHANS << 16;
val |= (0x2 << 20) | BCE_DMA_CONFIG_CNTL_PCI_COMP_DLY;
if ((sc->bce_flags & BCE_PCIX_FLAG) && (sc->bus_speed_mhz == 133))
val |= BCE_DMA_CONFIG_PCI_FAST_CLK_CMP;
/*
* This setting resolves a problem observed on certain Intel PCI
* chipsets that cannot handle multiple outstanding DMA operations.
* See errata E9_5706A1_65.
*/
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) &&
(BCE_CHIP_ID(sc) != BCE_CHIP_ID_5706_A0) &&
!(sc->bce_flags & BCE_PCIX_FLAG))
val |= BCE_DMA_CONFIG_CNTL_PING_PONG_DMA;
REG_WR(sc, BCE_DMA_CONFIG, val);
/* Clear the PCI-X relaxed ordering bit. See errata E3_5708CA0_570. */
if (sc->bce_flags & BCE_PCIX_FLAG) {
u16 val;
val = pci_read_config(sc->bce_dev, BCE_PCI_PCIX_CMD, 2);
pci_write_config(sc->bce_dev, BCE_PCI_PCIX_CMD, val & ~0x2, 2);
}
/* Enable the RX_V2P and Context state machines before access. */
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS,
BCE_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE |
BCE_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE |
BCE_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE);
/* Initialize context mapping and zero out the quick contexts. */
bce_init_context(sc);
/* Initialize the on-boards CPUs */
bce_init_cpus(sc);
/* Prepare NVRAM for access. */
if (bce_init_nvram(sc)) {
rc = ENODEV;
goto bce_chipinit_exit;
}
/* Set the kernel bypass block size */
val = REG_RD(sc, BCE_MQ_CONFIG);
val &= ~BCE_MQ_CONFIG_KNL_BYP_BLK_SIZE;
val |= BCE_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
REG_WR(sc, BCE_MQ_CONFIG, val);
val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE);
REG_WR(sc, BCE_MQ_KNL_BYP_WIND_START, val);
REG_WR(sc, BCE_MQ_KNL_WIND_END, val);
val = (BCM_PAGE_BITS - 8) << 24;
REG_WR(sc, BCE_RV2P_CONFIG, val);
/* Configure page size. */
val = REG_RD(sc, BCE_TBDR_CONFIG);
val &= ~BCE_TBDR_CONFIG_PAGE_SIZE;
val |= (BCM_PAGE_BITS - 8) << 24 | 0x40;
REG_WR(sc, BCE_TBDR_CONFIG, val);
bce_chipinit_exit:
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Initialize the controller in preparation to send/receive traffic. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_blockinit(struct bce_softc *sc)
{
u32 reg, val;
int rc = 0;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Load the hardware default MAC address. */
bce_set_mac_addr(sc);
/* Set the Ethernet backoff seed value */
val = sc->eaddr[0] + (sc->eaddr[1] << 8) +
(sc->eaddr[2] << 16) + (sc->eaddr[3] ) +
(sc->eaddr[4] << 8) + (sc->eaddr[5] << 16);
REG_WR(sc, BCE_EMAC_BACKOFF_SEED, val);
sc->last_status_idx = 0;
sc->rx_mode = BCE_EMAC_RX_MODE_SORT_MODE;
/* Set up link change interrupt generation. */
REG_WR(sc, BCE_EMAC_ATTENTION_ENA, BCE_EMAC_ATTENTION_ENA_LINK);
/* Program the physical address of the status block. */
REG_WR(sc, BCE_HC_STATUS_ADDR_L,
BCE_ADDR_LO(sc->status_block_paddr));
REG_WR(sc, BCE_HC_STATUS_ADDR_H,
BCE_ADDR_HI(sc->status_block_paddr));
/* Program the physical address of the statistics block. */
REG_WR(sc, BCE_HC_STATISTICS_ADDR_L,
BCE_ADDR_LO(sc->stats_block_paddr));
REG_WR(sc, BCE_HC_STATISTICS_ADDR_H,
BCE_ADDR_HI(sc->stats_block_paddr));
/* Program various host coalescing parameters. */
REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP,
(sc->bce_tx_quick_cons_trip_int << 16) | sc->bce_tx_quick_cons_trip);
REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP,
(sc->bce_rx_quick_cons_trip_int << 16) | sc->bce_rx_quick_cons_trip);
REG_WR(sc, BCE_HC_COMP_PROD_TRIP,
(sc->bce_comp_prod_trip_int << 16) | sc->bce_comp_prod_trip);
REG_WR(sc, BCE_HC_TX_TICKS,
(sc->bce_tx_ticks_int << 16) | sc->bce_tx_ticks);
REG_WR(sc, BCE_HC_RX_TICKS,
(sc->bce_rx_ticks_int << 16) | sc->bce_rx_ticks);
REG_WR(sc, BCE_HC_COM_TICKS,
(sc->bce_com_ticks_int << 16) | sc->bce_com_ticks);
REG_WR(sc, BCE_HC_CMD_TICKS,
(sc->bce_cmd_ticks_int << 16) | sc->bce_cmd_ticks);
REG_WR(sc, BCE_HC_STATS_TICKS,
(sc->bce_stats_ticks & 0xffff00));
REG_WR(sc, BCE_HC_STAT_COLLECT_TICKS,
0xbb8); /* 3ms */
REG_WR(sc, BCE_HC_CONFIG,
(BCE_HC_CONFIG_RX_TMR_MODE | BCE_HC_CONFIG_TX_TMR_MODE |
BCE_HC_CONFIG_COLLECT_STATS));
/* Clear the internal statistics counters. */
REG_WR(sc, BCE_HC_COMMAND, BCE_HC_COMMAND_CLR_STAT_NOW);
/* Verify that bootcode is running. */
reg = REG_RD_IND(sc, sc->bce_shmem_base + BCE_DEV_INFO_SIGNATURE);
DBRUNIF(DB_RANDOMTRUE(bce_debug_bootcode_running_failure),
BCE_PRINTF(sc, "%s(%d): Simulating bootcode failure.\n",
__FILE__, __LINE__);
reg = 0);
if ((reg & BCE_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
BCE_DEV_INFO_SIGNATURE_MAGIC) {
BCE_PRINTF(sc, "%s(%d): Bootcode not running! Found: 0x%08X, "
"Expected: 08%08X\n", __FILE__, __LINE__,
(reg & BCE_DEV_INFO_SIGNATURE_MAGIC_MASK),
BCE_DEV_INFO_SIGNATURE_MAGIC);
rc = ENODEV;
goto bce_blockinit_exit;
}
/* Check if any management firmware is running. */
reg = REG_RD_IND(sc, sc->bce_shmem_base + BCE_PORT_FEATURE);
if (reg & (BCE_PORT_FEATURE_ASF_ENABLED | BCE_PORT_FEATURE_IMD_ENABLED)) {
DBPRINT(sc, BCE_INFO, "Management F/W Enabled.\n");
sc->bce_flags |= BCE_MFW_ENABLE_FLAG;
}
sc->bce_fw_ver = REG_RD_IND(sc, sc->bce_shmem_base + BCE_DEV_INFO_BC_REV);
DBPRINT(sc, BCE_INFO, "bootcode rev = 0x%08X\n", sc->bce_fw_ver);
/* Allow bootcode to apply any additional fixes before enabling MAC. */
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT2 | BCE_DRV_MSG_CODE_RESET);
/* Enable link state change interrupt generation. */
REG_WR(sc, BCE_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE);
/* Enable all remaining blocks in the MAC. */
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS, 0x5ffffff);
REG_RD(sc, BCE_MISC_ENABLE_SET_BITS);
DELAY(20);
bce_blockinit_exit:
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return (rc);
}
/****************************************************************************/
/* Encapsulate an mbuf cluster into the rx_bd chain. */
/* */
/* The NetXtreme II can support Jumbo frames by using multiple rx_bd's. */
/* This routine will map an mbuf cluster into 1 or more rx_bd's as */
/* necessary. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_get_buf(struct bce_softc *sc, struct mbuf *m, u16 *prod, u16 *chain_prod,
u32 *prod_bseq)
{
bus_dmamap_t map;
bus_dma_segment_t segs[4];
struct mbuf *m_new = NULL;
struct rx_bd *rxbd;
int i, nsegs, error, rc = 0;
#ifdef BCE_DEBUG
u16 debug_chain_prod = *chain_prod;
#endif
DBPRINT(sc, (BCE_VERBOSE_RESET | BCE_VERBOSE_RECV), "Entering %s()\n",
__FUNCTION__);
/* Make sure the inputs are valid. */
DBRUNIF((*chain_prod > MAX_RX_BD),
BCE_PRINTF(sc, "%s(%d): RX producer out of range: 0x%04X > 0x%04X\n",
__FILE__, __LINE__, *chain_prod, (u16) MAX_RX_BD));
DBPRINT(sc, BCE_VERBOSE_RECV, "%s(enter): prod = 0x%04X, chain_prod = 0x%04X, "
"prod_bseq = 0x%08X\n", __FUNCTION__, *prod, *chain_prod, *prod_bseq);
if (m == NULL) {
DBRUNIF(DB_RANDOMTRUE(bce_debug_mbuf_allocation_failure),
BCE_PRINTF(sc, "%s(%d): Simulating mbuf allocation failure.\n",
__FILE__, __LINE__);
sc->mbuf_alloc_failed++;
rc = ENOBUFS;
goto bce_get_buf_exit);
/* This is a new mbuf allocation. */
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
if (m_new == NULL) {
DBPRINT(sc, BCE_WARN, "%s(%d): RX mbuf header allocation failed!\n",
__FILE__, __LINE__);
DBRUNIF(1, sc->mbuf_alloc_failed++);
rc = ENOBUFS;
goto bce_get_buf_exit;
}
DBRUNIF(1, sc->rx_mbuf_alloc++);
m_cljget(m_new, M_DONTWAIT, sc->mbuf_alloc_size);
if (!(m_new->m_flags & M_EXT)) {
DBPRINT(sc, BCE_WARN, "%s(%d): RX mbuf chain allocation failed!\n",
__FILE__, __LINE__);
m_freem(m_new);
DBRUNIF(1, sc->rx_mbuf_alloc--);
DBRUNIF(1, sc->mbuf_alloc_failed++);
rc = ENOBUFS;
goto bce_get_buf_exit;
}
m_new->m_len = m_new->m_pkthdr.len = sc->mbuf_alloc_size;
} else {
m_new = m;
m_new->m_len = m_new->m_pkthdr.len = sc->mbuf_alloc_size;
m_new->m_data = m_new->m_ext.ext_buf;
}
/* Map the mbuf cluster into device memory. */
map = sc->rx_mbuf_map[*chain_prod];
error = bus_dmamap_load_mbuf_sg(sc->rx_mbuf_tag, map, m_new,
segs, &nsegs, BUS_DMA_NOWAIT);
if (error) {
BCE_PRINTF(sc, "%s(%d): Error mapping mbuf into RX chain!\n",
__FILE__, __LINE__);
m_freem(m_new);
DBRUNIF(1, sc->rx_mbuf_alloc--);
rc = ENOBUFS;
goto bce_get_buf_exit;
}
/* Watch for overflow. */
DBRUNIF((sc->free_rx_bd > USABLE_RX_BD),
BCE_PRINTF(sc, "%s(%d): Too many free rx_bd (0x%04X > 0x%04X)!\n",
__FILE__, __LINE__, sc->free_rx_bd, (u16) USABLE_RX_BD));
DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark),
sc->rx_low_watermark = sc->free_rx_bd);
/* Setup the rx_bd for the first segment. */
rxbd = &sc->rx_bd_chain[RX_PAGE(*chain_prod)][RX_IDX(*chain_prod)];
rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[0].ds_addr));
rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[0].ds_addr));
rxbd->rx_bd_len = htole32(segs[0].ds_len);
rxbd->rx_bd_flags = htole32(RX_BD_FLAGS_START);
*prod_bseq += segs[0].ds_len;
for (i = 1; i < nsegs; i++) {
*prod = NEXT_RX_BD(*prod);
*chain_prod = RX_CHAIN_IDX(*prod);
rxbd = &sc->rx_bd_chain[RX_PAGE(*chain_prod)][RX_IDX(*chain_prod)];
rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[i].ds_addr));
rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[i].ds_addr));
rxbd->rx_bd_len = htole32(segs[i].ds_len);
rxbd->rx_bd_flags = 0;
*prod_bseq += segs[i].ds_len;
}
rxbd->rx_bd_flags |= htole32(RX_BD_FLAGS_END);
/* Save the mbuf and update our counter. */
sc->rx_mbuf_ptr[*chain_prod] = m_new;
sc->free_rx_bd -= nsegs;
DBRUN(BCE_VERBOSE_RECV, bce_dump_rx_mbuf_chain(sc, debug_chain_prod,
nsegs));
DBPRINT(sc, BCE_VERBOSE_RECV, "%s(exit): prod = 0x%04X, chain_prod = 0x%04X, "
"prod_bseq = 0x%08X\n", __FUNCTION__, *prod, *chain_prod, *prod_bseq);
bce_get_buf_exit:
DBPRINT(sc, (BCE_VERBOSE_RESET | BCE_VERBOSE_RECV), "Exiting %s()\n",
__FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Allocate memory and initialize the TX data structures. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_init_tx_chain(struct bce_softc *sc)
{
struct tx_bd *txbd;
u32 val;
int i, rc = 0;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Set the initial TX producer/consumer indices. */
sc->tx_prod = 0;
sc->tx_cons = 0;
sc->tx_prod_bseq = 0;
sc->used_tx_bd = 0;
DBRUNIF(1, sc->tx_hi_watermark = USABLE_TX_BD);
/*
* The NetXtreme II supports a linked-list structre called
* a Buffer Descriptor Chain (or BD chain). A BD chain
* consists of a series of 1 or more chain pages, each of which
* consists of a fixed number of BD entries.
* The last BD entry on each page is a pointer to the next page
* in the chain, and the last pointer in the BD chain
* points back to the beginning of the chain.
*/
/* Set the TX next pointer chain entries. */
for (i = 0; i < TX_PAGES; i++) {
int j;
txbd = &sc->tx_bd_chain[i][USABLE_TX_BD_PER_PAGE];
/* Check if we've reached the last page. */
if (i == (TX_PAGES - 1))
j = 0;
else
j = i + 1;
txbd->tx_bd_haddr_hi = htole32(BCE_ADDR_HI(sc->tx_bd_chain_paddr[j]));
txbd->tx_bd_haddr_lo = htole32(BCE_ADDR_LO(sc->tx_bd_chain_paddr[j]));
}
/*
* Initialize the context ID for an L2 TX chain.
*/
val = BCE_L2CTX_TYPE_TYPE_L2;
val |= BCE_L2CTX_TYPE_SIZE_L2;
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TYPE, val);
val = BCE_L2CTX_CMD_TYPE_TYPE_L2 | (8 << 16);
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_CMD_TYPE, val);
/* Point the hardware to the first page in the chain. */
val = BCE_ADDR_HI(sc->tx_bd_chain_paddr[0]);
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TBDR_BHADDR_HI, val);
val = BCE_ADDR_LO(sc->tx_bd_chain_paddr[0]);
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TBDR_BHADDR_LO, val);
DBRUN(BCE_VERBOSE_SEND, bce_dump_tx_chain(sc, 0, TOTAL_TX_BD));
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Free memory and clear the TX data structures. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_free_tx_chain(struct bce_softc *sc)
{
int i;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Unmap, unload, and free any mbufs still in the TX mbuf chain. */
for (i = 0; i < TOTAL_TX_BD; i++) {
if (sc->tx_mbuf_ptr[i] != NULL) {
if (sc->tx_mbuf_map != NULL)
bus_dmamap_sync(sc->tx_mbuf_tag, sc->tx_mbuf_map[i],
BUS_DMASYNC_POSTWRITE);
m_freem(sc->tx_mbuf_ptr[i]);
sc->tx_mbuf_ptr[i] = NULL;
DBRUNIF(1, sc->tx_mbuf_alloc--);
}
}
/* Clear each TX chain page. */
for (i = 0; i < TX_PAGES; i++)
bzero((char *)sc->tx_bd_chain[i], BCE_TX_CHAIN_PAGE_SZ);
/* Check if we lost any mbufs in the process. */
DBRUNIF((sc->tx_mbuf_alloc),
BCE_PRINTF(sc, "%s(%d): Memory leak! Lost %d mbufs "
"from tx chain!\n",
__FILE__, __LINE__, sc->tx_mbuf_alloc));
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Allocate memory and initialize the RX data structures. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_init_rx_chain(struct bce_softc *sc)
{
struct rx_bd *rxbd;
int i, rc = 0;
u16 prod, chain_prod;
u32 prod_bseq, val;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Initialize the RX producer and consumer indices. */
sc->rx_prod = 0;
sc->rx_cons = 0;
sc->rx_prod_bseq = 0;
sc->free_rx_bd = BCE_RX_SLACK_SPACE;
DBRUNIF(1, sc->rx_low_watermark = USABLE_RX_BD);
/* Initialize the RX next pointer chain entries. */
for (i = 0; i < RX_PAGES; i++) {
int j;
rxbd = &sc->rx_bd_chain[i][USABLE_RX_BD_PER_PAGE];
/* Check if we've reached the last page. */
if (i == (RX_PAGES - 1))
j = 0;
else
j = i + 1;
/* Setup the chain page pointers. */
rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(sc->rx_bd_chain_paddr[j]));
rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(sc->rx_bd_chain_paddr[j]));
}
/* Initialize the context ID for an L2 RX chain. */
val = BCE_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE;
val |= BCE_L2CTX_CTX_TYPE_SIZE_L2;
val |= 0x02 << 8;
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_CTX_TYPE, val);
/* Point the hardware to the first page in the chain. */
val = BCE_ADDR_HI(sc->rx_bd_chain_paddr[0]);
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_NX_BDHADDR_HI, val);
val = BCE_ADDR_LO(sc->rx_bd_chain_paddr[0]);
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_NX_BDHADDR_LO, val);
/* Allocate mbuf clusters for the rx_bd chain. */
prod = prod_bseq = 0;
while (prod < BCE_RX_SLACK_SPACE) {
chain_prod = RX_CHAIN_IDX(prod);
if (bce_get_buf(sc, NULL, &prod, &chain_prod, &prod_bseq)) {
BCE_PRINTF(sc, "%s(%d): Error filling RX chain: rx_bd[0x%04X]!\n",
__FILE__, __LINE__, chain_prod);
rc = ENOBUFS;
break;
}
prod = NEXT_RX_BD(prod);
}
/* Save the RX chain producer index. */
sc->rx_prod = prod;
sc->rx_prod_bseq = prod_bseq;
for (i = 0; i < RX_PAGES; i++) {
bus_dmamap_sync(
sc->rx_bd_chain_tag,
sc->rx_bd_chain_map[i],
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
}
/* Tell the chip about the waiting rx_bd's. */
REG_WR16(sc, MB_RX_CID_ADDR + BCE_L2CTX_HOST_BDIDX, sc->rx_prod);
REG_WR(sc, MB_RX_CID_ADDR + BCE_L2CTX_HOST_BSEQ, sc->rx_prod_bseq);
DBRUN(BCE_VERBOSE_RECV, bce_dump_rx_chain(sc, 0, TOTAL_RX_BD));
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(rc);
}
/****************************************************************************/
/* Free memory and clear the RX data structures. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_free_rx_chain(struct bce_softc *sc)
{
int i;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
/* Free any mbufs still in the RX mbuf chain. */
for (i = 0; i < TOTAL_RX_BD; i++) {
if (sc->rx_mbuf_ptr[i] != NULL) {
if (sc->rx_mbuf_map[i] != NULL)
bus_dmamap_sync(sc->rx_mbuf_tag, sc->rx_mbuf_map[i],
BUS_DMASYNC_POSTREAD);
m_freem(sc->rx_mbuf_ptr[i]);
sc->rx_mbuf_ptr[i] = NULL;
DBRUNIF(1, sc->rx_mbuf_alloc--);
}
}
/* Clear each RX chain page. */
for (i = 0; i < RX_PAGES; i++)
bzero((char *)sc->rx_bd_chain[i], BCE_RX_CHAIN_PAGE_SZ);
/* Check if we lost any mbufs in the process. */
DBRUNIF((sc->rx_mbuf_alloc),
BCE_PRINTF(sc, "%s(%d): Memory leak! Lost %d mbufs from rx chain!\n",
__FILE__, __LINE__, sc->rx_mbuf_alloc));
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
}
/****************************************************************************/
/* Set media options. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_ifmedia_upd(struct ifnet *ifp)
{
struct bce_softc *sc;
struct mii_data *mii;
struct ifmedia *ifm;
int rc = 0;
sc = ifp->if_softc;
ifm = &sc->bce_ifmedia;
/* DRC - ToDo: Add SerDes support. */
mii = device_get_softc(sc->bce_miibus);
sc->bce_link = 0;
if (mii->mii_instance) {
struct mii_softc *miisc;
for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL;
miisc = LIST_NEXT(miisc, mii_list))
mii_phy_reset(miisc);
}
mii_mediachg(mii);
return(rc);
}
/****************************************************************************/
/* Reports current media status. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct bce_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
BCE_LOCK(sc);
mii = device_get_softc(sc->bce_miibus);
/* DRC - ToDo: Add SerDes support. */
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
BCE_UNLOCK(sc);
}
/****************************************************************************/
/* Handles PHY generated interrupt events. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_phy_intr(struct bce_softc *sc)
{
u32 new_link_state, old_link_state;
new_link_state = sc->status_block->status_attn_bits &
STATUS_ATTN_BITS_LINK_STATE;
old_link_state = sc->status_block->status_attn_bits_ack &
STATUS_ATTN_BITS_LINK_STATE;
/* Handle any changes if the link state has changed. */
if (new_link_state != old_link_state) {
DBRUN(BCE_VERBOSE_INTR, bce_dump_status_block(sc));
sc->bce_link = 0;
callout_stop(&sc->bce_stat_ch);
bce_tick_locked(sc);
/* Update the status_attn_bits_ack field in the status block. */
if (new_link_state) {
REG_WR(sc, BCE_PCICFG_STATUS_BIT_SET_CMD,
STATUS_ATTN_BITS_LINK_STATE);
DBPRINT(sc, BCE_INFO, "Link is now UP.\n");
}
else {
REG_WR(sc, BCE_PCICFG_STATUS_BIT_CLEAR_CMD,
STATUS_ATTN_BITS_LINK_STATE);
DBPRINT(sc, BCE_INFO, "Link is now DOWN.\n");
}
}
/* Acknowledge the link change interrupt. */
REG_WR(sc, BCE_EMAC_STATUS, BCE_EMAC_STATUS_LINK_CHANGE);
}
/****************************************************************************/
/* Handles received frame interrupt events. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_rx_intr(struct bce_softc *sc)
{
struct status_block *sblk = sc->status_block;
struct ifnet *ifp = sc->bce_ifp;
u16 hw_cons, sw_cons, sw_chain_cons, sw_prod, sw_chain_prod;
u32 sw_prod_bseq;
struct l2_fhdr *l2fhdr;
DBRUNIF(1, sc->rx_interrupts++);
/* Prepare the RX chain pages to be accessed by the host CPU. */
for (int i = 0; i < RX_PAGES; i++)
bus_dmamap_sync(sc->rx_bd_chain_tag,
sc->rx_bd_chain_map[i], BUS_DMASYNC_POSTWRITE);
/* Get the hardware's view of the RX consumer index. */
hw_cons = sc->hw_rx_cons = sblk->status_rx_quick_consumer_index0;
if ((hw_cons & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
hw_cons++;
/* Get working copies of the driver's view of the RX indices. */
sw_cons = sc->rx_cons;
sw_prod = sc->rx_prod;
sw_prod_bseq = sc->rx_prod_bseq;
DBPRINT(sc, BCE_INFO_RECV, "%s(enter): sw_prod = 0x%04X, "
"sw_cons = 0x%04X, sw_prod_bseq = 0x%08X\n",
__FUNCTION__, sw_prod, sw_cons,
sw_prod_bseq);
/* Prevent speculative reads from getting ahead of the status block. */
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark),
sc->rx_low_watermark = sc->free_rx_bd);
/*
* Scan through the receive chain as long
* as there is work to do.
*/
while (sw_cons != hw_cons) {
struct mbuf *m;
struct rx_bd *rxbd;
unsigned int len;
u32 status;
/* Convert the producer/consumer indices to an actual rx_bd index. */
sw_chain_cons = RX_CHAIN_IDX(sw_cons);
sw_chain_prod = RX_CHAIN_IDX(sw_prod);
/* Get the used rx_bd. */
rxbd = &sc->rx_bd_chain[RX_PAGE(sw_chain_cons)][RX_IDX(sw_chain_cons)];
sc->free_rx_bd++;
DBRUN(BCE_VERBOSE_RECV,
BCE_PRINTF(sc, "%s(): ", __FUNCTION__);
bce_dump_rxbd(sc, sw_chain_cons, rxbd));
#ifdef DEVICE_POLLING
if (ifp->if_capenable & IFCAP_POLLING) {
if (sc->bce_rxcycles <= 0)
break;
Fix DEVICE_POLLING support (compile-only tested).
2006-04-13 14:12:26 +00:00
sc->bce_rxcycles--;
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
}
#endif
/* The mbuf is stored with the last rx_bd entry of a packet. */
if (sc->rx_mbuf_ptr[sw_chain_cons] != NULL) {
/* Validate that this is the last rx_bd. */
DBRUNIF((!(rxbd->rx_bd_flags & RX_BD_FLAGS_END)),
BCE_PRINTF(sc, "%s(%d): Unexpected mbuf found in rx_bd[0x%04X]!\n",
__FILE__, __LINE__, sw_chain_cons);
bce_breakpoint(sc));
/* DRC - ToDo: If the received packet is small, say less */
/* than 128 bytes, allocate a new mbuf here, */
/* copy the data to that mbuf, and recycle */
/* the mapped jumbo frame. */
/* Unmap the mbuf from DMA space. */
bus_dmamap_sync(sc->rx_mbuf_tag,
sc->rx_mbuf_map[sw_chain_cons],
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->rx_mbuf_tag,
sc->rx_mbuf_map[sw_chain_cons]);
/* Remove the mbuf from the driver's chain. */
m = sc->rx_mbuf_ptr[sw_chain_cons];
sc->rx_mbuf_ptr[sw_chain_cons] = NULL;
/*
* Frames received on the NetXteme II are prepended
* with the l2_fhdr structure which provides status
* information about the received frame (including
* VLAN tags and checksum info) and are also
* automatically adjusted to align the IP header
* (i.e. two null bytes are inserted before the
* Ethernet header).
*/
l2fhdr = mtod(m, struct l2_fhdr *);
len = l2fhdr->l2_fhdr_pkt_len;
status = l2fhdr->l2_fhdr_status;
DBRUNIF(DB_RANDOMTRUE(bce_debug_l2fhdr_status_check),
BCE_PRINTF(sc, "Simulating l2_fhdr status error.\n");
status = status | L2_FHDR_ERRORS_PHY_DECODE);
/* Watch for unusual sized frames. */
DBRUNIF(((len < BCE_MIN_MTU) || (len > BCE_MAX_JUMBO_ETHER_MTU_VLAN)),
BCE_PRINTF(sc, "%s(%d): Unusual frame size found. "
"Min(%d), Actual(%d), Max(%d)\n",
__FILE__, __LINE__, (int) BCE_MIN_MTU,
len, (int) BCE_MAX_JUMBO_ETHER_MTU_VLAN);
bce_dump_mbuf(sc, m);
bce_breakpoint(sc));
len -= ETHER_CRC_LEN;
/* Check the received frame for errors. */
if (status & (L2_FHDR_ERRORS_BAD_CRC |
L2_FHDR_ERRORS_PHY_DECODE | L2_FHDR_ERRORS_ALIGNMENT |
L2_FHDR_ERRORS_TOO_SHORT | L2_FHDR_ERRORS_GIANT_FRAME)) {
ifp->if_ierrors++;
DBRUNIF(1, sc->l2fhdr_status_errors++);
/* Reuse the mbuf for a new frame. */
if (bce_get_buf(sc, m, &sw_prod, &sw_chain_prod, &sw_prod_bseq)) {
DBRUNIF(1, bce_breakpoint(sc));
panic("bce%d: Can't reuse RX mbuf!\n", sc->bce_unit);
}
goto bce_rx_int_next_rx;
}
/*
* Get a new mbuf for the rx_bd. If no new
* mbufs are available then reuse the current mbuf,
* log an ierror on the interface, and generate
* an error in the system log.
*/
if (bce_get_buf(sc, NULL, &sw_prod, &sw_chain_prod, &sw_prod_bseq)) {
DBRUN(BCE_WARN,
BCE_PRINTF(sc, "%s(%d): Failed to allocate "
"new mbuf, incoming frame dropped!\n",
__FILE__, __LINE__));
ifp->if_ierrors++;
/* Try and reuse the exisitng mbuf. */
if (bce_get_buf(sc, m, &sw_prod, &sw_chain_prod, &sw_prod_bseq)) {
DBRUNIF(1, bce_breakpoint(sc));
panic("bce%d: Double mbuf allocation failure!", sc->bce_unit);
}
goto bce_rx_int_next_rx;
}
/* Skip over the l2_fhdr when passing the data up the stack. */
m_adj(m, sizeof(struct l2_fhdr) + ETHER_ALIGN);
/* Adjust the packet length to match the received data. */
m->m_pkthdr.len = m->m_len = len;
/* Send the packet to the appropriate interface. */
m->m_pkthdr.rcvif = ifp;
DBRUN(BCE_VERBOSE_RECV,
struct ether_header *eh;
eh = mtod(m, struct ether_header *);
BCE_PRINTF(sc, "%s(): to: %6D, from: %6D, type: 0x%04X\n",
__FUNCTION__, eh->ether_dhost, ":",
eh->ether_shost, ":", htons(eh->ether_type)));
/* Validate the checksum if offload enabled. */
if (ifp->if_capenable & IFCAP_RXCSUM) {
/* Check for an IP datagram. */
if (status & L2_FHDR_STATUS_IP_DATAGRAM) {
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
/* Check if the IP checksum is valid. */
if ((l2fhdr->l2_fhdr_ip_xsum ^ 0xffff) == 0)
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
else
DBPRINT(sc, BCE_WARN_SEND,
"%s(): Invalid IP checksum = 0x%04X!\n",
__FUNCTION__, l2fhdr->l2_fhdr_ip_xsum);
}
/* Check for a valid TCP/UDP frame. */
if (status & (L2_FHDR_STATUS_TCP_SEGMENT |
L2_FHDR_STATUS_UDP_DATAGRAM)) {
/* Check for a good TCP/UDP checksum. */
if ((status & (L2_FHDR_ERRORS_TCP_XSUM |
L2_FHDR_ERRORS_UDP_XSUM)) == 0) {
m->m_pkthdr.csum_data =
l2fhdr->l2_fhdr_tcp_udp_xsum;
m->m_pkthdr.csum_flags |= (CSUM_DATA_VALID
| CSUM_PSEUDO_HDR);
} else
DBPRINT(sc, BCE_WARN_SEND,
"%s(): Invalid TCP/UDP checksum = 0x%04X!\n",
__FUNCTION__, l2fhdr->l2_fhdr_tcp_udp_xsum);
}
}
/*
* If we received a packet with a vlan tag,
* attach that information to the packet.
*/
if (status & L2_FHDR_STATUS_L2_VLAN_TAG) {
DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): VLAN tag = 0x%04X\n",
__FUNCTION__, l2fhdr->l2_fhdr_vlan_tag);
#if __FreeBSD_version < 700000
VLAN_INPUT_TAG(ifp, m, l2fhdr->l2_fhdr_vlan_tag, continue);
#else
Move ethernet VLAN tags from mtags to its own mbuf packet header field m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf signifies the presence and validity of its content. Drivers that support hardware VLAN tag stripping fill in the received VLAN tag (containing both vlan and priority information) into the ether_vtag mbuf packet header field: m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */ m->m_flags |= M_VLANTAG; to mark the packet m with the specified VLAN tag. On output the driver should check the mbuf for the M_VLANTAG flag to see if a VLAN tag is present and valid: if (m->m_flags & M_VLANTAG) { ... = m->m_pkthdr.ether_vtag; /* htons()? */ ... pass tag to hardware ... } VLAN tags are stored in host byte order. Byte swapping may be necessary. (Note: This driver conversion was mechanic and did not add or remove any byte swapping in the drivers.) Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag memory allocation have to be done. Reviewed by: thompsa, yar Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
m->m_pkthdr.ether_vtag = l2fhdr->l2_fhdr_vlan_tag;
m->m_flags |= M_VLANTAG;
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
#endif
}
/* Pass the mbuf off to the upper layers. */
ifp->if_ipackets++;
DBPRINT(sc, BCE_VERBOSE_RECV, "%s(): Passing received frame up.\n",
__FUNCTION__);
BCE_UNLOCK(sc);
(*ifp->if_input)(ifp, m);
DBRUNIF(1, sc->rx_mbuf_alloc--);
BCE_LOCK(sc);
bce_rx_int_next_rx:
sw_prod = NEXT_RX_BD(sw_prod);
}
sw_cons = NEXT_RX_BD(sw_cons);
/* Refresh hw_cons to see if there's new work */
if (sw_cons == hw_cons) {
hw_cons = sc->hw_rx_cons = sblk->status_rx_quick_consumer_index0;
if ((hw_cons & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
hw_cons++;
}
/* Prevent speculative reads from getting ahead of the status block. */
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
}
for (int i = 0; i < RX_PAGES; i++)
bus_dmamap_sync(sc->rx_bd_chain_tag,
sc->rx_bd_chain_map[i], BUS_DMASYNC_PREWRITE);
sc->rx_cons = sw_cons;
sc->rx_prod = sw_prod;
sc->rx_prod_bseq = sw_prod_bseq;
REG_WR16(sc, MB_RX_CID_ADDR + BCE_L2CTX_HOST_BDIDX, sc->rx_prod);
REG_WR(sc, MB_RX_CID_ADDR + BCE_L2CTX_HOST_BSEQ, sc->rx_prod_bseq);
DBPRINT(sc, BCE_INFO_RECV, "%s(exit): rx_prod = 0x%04X, "
"rx_cons = 0x%04X, rx_prod_bseq = 0x%08X\n",
__FUNCTION__, sc->rx_prod, sc->rx_cons, sc->rx_prod_bseq);
}
/****************************************************************************/
/* Handles transmit completion interrupt events. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_tx_intr(struct bce_softc *sc)
{
struct status_block *sblk = sc->status_block;
struct ifnet *ifp = sc->bce_ifp;
u16 hw_tx_cons, sw_tx_cons, sw_tx_chain_cons;
BCE_LOCK_ASSERT(sc);
DBRUNIF(1, sc->tx_interrupts++);
/* Get the hardware's view of the TX consumer index. */
hw_tx_cons = sc->hw_tx_cons = sblk->status_tx_quick_consumer_index0;
/* Skip to the next entry if this is a chain page pointer. */
if ((hw_tx_cons & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
hw_tx_cons++;
sw_tx_cons = sc->tx_cons;
/* Prevent speculative reads from getting ahead of the status block. */
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
/* Cycle through any completed TX chain page entries. */
while (sw_tx_cons != hw_tx_cons) {
#ifdef BCE_DEBUG
struct tx_bd *txbd = NULL;
#endif
sw_tx_chain_cons = TX_CHAIN_IDX(sw_tx_cons);
DBPRINT(sc, BCE_INFO_SEND,
"%s(): hw_tx_cons = 0x%04X, sw_tx_cons = 0x%04X, "
"sw_tx_chain_cons = 0x%04X\n",
__FUNCTION__, hw_tx_cons, sw_tx_cons, sw_tx_chain_cons);
DBRUNIF((sw_tx_chain_cons > MAX_TX_BD),
BCE_PRINTF(sc, "%s(%d): TX chain consumer out of range! "
" 0x%04X > 0x%04X\n",
__FILE__, __LINE__, sw_tx_chain_cons,
(int) MAX_TX_BD);
bce_breakpoint(sc));
DBRUNIF(1,
txbd = &sc->tx_bd_chain[TX_PAGE(sw_tx_chain_cons)]
[TX_IDX(sw_tx_chain_cons)]);
DBRUNIF((txbd == NULL),
BCE_PRINTF(sc, "%s(%d): Unexpected NULL tx_bd[0x%04X]!\n",
__FILE__, __LINE__, sw_tx_chain_cons);
bce_breakpoint(sc));
DBRUN(BCE_INFO_SEND,
BCE_PRINTF(sc, "%s(): ", __FUNCTION__);
bce_dump_txbd(sc, sw_tx_chain_cons, txbd));
/*
* Free the associated mbuf. Remember
* that only the last tx_bd of a packet
* has an mbuf pointer and DMA map.
*/
if (sc->tx_mbuf_ptr[sw_tx_chain_cons] != NULL) {
/* Validate that this is the last tx_bd. */
DBRUNIF((!(txbd->tx_bd_vlan_tag_flags & TX_BD_FLAGS_END)),
BCE_PRINTF(sc, "%s(%d): tx_bd END flag not set but "
"txmbuf == NULL!\n", __FILE__, __LINE__);
bce_breakpoint(sc));
DBRUN(BCE_INFO_SEND,
BCE_PRINTF(sc, "%s(): Unloading map/freeing mbuf "
"from tx_bd[0x%04X]\n", __FUNCTION__, sw_tx_chain_cons));
/* Unmap the mbuf. */
bus_dmamap_unload(sc->tx_mbuf_tag,
sc->tx_mbuf_map[sw_tx_chain_cons]);
/* Free the mbuf. */
m_freem(sc->tx_mbuf_ptr[sw_tx_chain_cons]);
sc->tx_mbuf_ptr[sw_tx_chain_cons] = NULL;
DBRUNIF(1, sc->tx_mbuf_alloc--);
ifp->if_opackets++;
}
sc->used_tx_bd--;
sw_tx_cons = NEXT_TX_BD(sw_tx_cons);
/* Refresh hw_cons to see if there's new work. */
hw_tx_cons = sc->hw_tx_cons = sblk->status_tx_quick_consumer_index0;
if ((hw_tx_cons & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
hw_tx_cons++;
/* Prevent speculative reads from getting ahead of the status block. */
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
}
/* Clear the TX timeout timer. */
ifp->if_timer = 0;
/* Clear the tx hardware queue full flag. */
if ((sc->used_tx_bd + BCE_TX_SLACK_SPACE) < USABLE_TX_BD) {
DBRUNIF((ifp->if_drv_flags & IFF_DRV_OACTIVE),
BCE_PRINTF(sc, "%s(): TX chain is open for business! Used tx_bd = %d\n",
__FUNCTION__, sc->used_tx_bd));
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
}
sc->tx_cons = sw_tx_cons;
}
/****************************************************************************/
/* Disables interrupt generation. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_disable_intr(struct bce_softc *sc)
{
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
BCE_PCICFG_INT_ACK_CMD_MASK_INT);
REG_RD(sc, BCE_PCICFG_INT_ACK_CMD);
}
/****************************************************************************/
/* Enables interrupt generation. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_enable_intr(struct bce_softc *sc)
{
u32 val;
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
BCE_PCICFG_INT_ACK_CMD_INDEX_VALID |
BCE_PCICFG_INT_ACK_CMD_MASK_INT | sc->last_status_idx);
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx);
val = REG_RD(sc, BCE_HC_COMMAND);
REG_WR(sc, BCE_HC_COMMAND, val | BCE_HC_COMMAND_COAL_NOW);
}
/****************************************************************************/
/* Handles controller initialization. */
/* */
/* Must be called from a locked routine. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_init_locked(struct bce_softc *sc)
{
struct ifnet *ifp;
u32 ether_mtu;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
BCE_LOCK_ASSERT(sc);
ifp = sc->bce_ifp;
/* Check if the driver is still running and bail out if it is. */
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
goto bce_init_locked_exit;
bce_stop(sc);
if (bce_reset(sc, BCE_DRV_MSG_CODE_RESET)) {
BCE_PRINTF(sc, "%s(%d): Controller reset failed!\n",
__FILE__, __LINE__);
goto bce_init_locked_exit;
}
if (bce_chipinit(sc)) {
BCE_PRINTF(sc, "%s(%d): Controller initialization failed!\n",
__FILE__, __LINE__);
goto bce_init_locked_exit;
}
if (bce_blockinit(sc)) {
BCE_PRINTF(sc, "%s(%d): Block initialization failed!\n",
__FILE__, __LINE__);
goto bce_init_locked_exit;
}
/* Load our MAC address. */
bcopy(IF_LLADDR(sc->bce_ifp), sc->eaddr, ETHER_ADDR_LEN);
bce_set_mac_addr(sc);
/* Calculate and program the Ethernet MTU size. */
ether_mtu = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN + ifp->if_mtu +
ETHER_CRC_LEN;
DBPRINT(sc, BCE_INFO, "%s(): setting mtu = %d\n",__FUNCTION__, ether_mtu);
/*
* Program the mtu, enabling jumbo frame
* support if necessary. Also set the mbuf
* allocation count for RX frames.
*/
if (ether_mtu > ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN) {
REG_WR(sc, BCE_EMAC_RX_MTU_SIZE, ether_mtu |
BCE_EMAC_RX_MTU_SIZE_JUMBO_ENA);
sc->mbuf_alloc_size = MJUM9BYTES;
} else {
REG_WR(sc, BCE_EMAC_RX_MTU_SIZE, ether_mtu);
sc->mbuf_alloc_size = MCLBYTES;
}
/* Calculate the RX Ethernet frame size for rx_bd's. */
sc->max_frame_size = sizeof(struct l2_fhdr) + 2 + ether_mtu + 8;
DBPRINT(sc, BCE_INFO,
"%s(): mclbytes = %d, mbuf_alloc_size = %d, "
"max_frame_size = %d\n",
__FUNCTION__, (int) MCLBYTES, sc->mbuf_alloc_size, sc->max_frame_size);
/* Program appropriate promiscuous/multicast filtering. */
bce_set_rx_mode(sc);
/* Init RX buffer descriptor chain. */
bce_init_rx_chain(sc);
/* Init TX buffer descriptor chain. */
bce_init_tx_chain(sc);
#ifdef DEVICE_POLLING
/* Disable interrupts if we are polling. */
if (ifp->if_capenable & IFCAP_POLLING) {
bce_disable_intr(sc);
REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP,
(1 << 16) | sc->bce_rx_quick_cons_trip);
REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP,
(1 << 16) | sc->bce_tx_quick_cons_trip);
} else
#endif
/* Enable host interrupts. */
bce_enable_intr(sc);
bce_ifmedia_upd(ifp);
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
callout_reset(&sc->bce_stat_ch, hz, bce_tick, sc);
bce_init_locked_exit:
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return;
}
Add a new 'bce_mgmt_init_locked' function to enable the minimal parts of the chip to let ASF/IPMI firmware to respond to IPMI after attaching and when the chip is down. David looked at it but could really say what they right minimal config. stuff would be. It's not documented. I figured this out via trial and error. Reviewed by: davidch
2006-09-20 18:55:16 +00:00
static void
bce_mgmt_init_locked(struct bce_softc *sc)
{
u32 val;
struct ifnet *ifp;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
BCE_LOCK_ASSERT(sc);
ifp = sc->bce_ifp;
/* Check if the driver is still running and bail out if it is. */
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
goto bce_mgmt_init_locked_exit;
/* Initialize the on-boards CPUs */
bce_init_cpus(sc);
val = (BCM_PAGE_BITS - 8) << 24;
REG_WR(sc, BCE_RV2P_CONFIG, val);
/* Enable all critical blocks in the MAC. */
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS,
BCE_MISC_ENABLE_SET_BITS_RX_V2P_ENABLE |
BCE_MISC_ENABLE_SET_BITS_RX_DMA_ENABLE |
BCE_MISC_ENABLE_SET_BITS_COMPLETION_ENABLE);
REG_RD(sc, BCE_MISC_ENABLE_SET_BITS);
DELAY(20);
bce_ifmedia_upd(ifp);
bce_mgmt_init_locked_exit:
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return;
}
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
/****************************************************************************/
/* Handles controller initialization when called from an unlocked routine. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_init(void *xsc)
{
struct bce_softc *sc = xsc;
BCE_LOCK(sc);
bce_init_locked(sc);
BCE_UNLOCK(sc);
}
/****************************************************************************/
/* Encapsultes an mbuf cluster into the tx_bd chain structure and makes the */
/* memory visible to the controller. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_tx_encap(struct bce_softc *sc, struct mbuf *m_head, u16 *prod,
u16 *chain_prod, u32 *prod_bseq)
{
u32 vlan_tag_flags = 0;
struct bce_dmamap_arg map_arg;
bus_dmamap_t map;
int i, error, rc = 0;
/* Transfer any checksum offload flags to the bd. */
if (m_head->m_pkthdr.csum_flags) {
if (m_head->m_pkthdr.csum_flags & CSUM_IP)
vlan_tag_flags |= TX_BD_FLAGS_IP_CKSUM;
if (m_head->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
}
/* Transfer any VLAN tags to the bd. */
Move ethernet VLAN tags from mtags to its own mbuf packet header field m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf signifies the presence and validity of its content. Drivers that support hardware VLAN tag stripping fill in the received VLAN tag (containing both vlan and priority information) into the ether_vtag mbuf packet header field: m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */ m->m_flags |= M_VLANTAG; to mark the packet m with the specified VLAN tag. On output the driver should check the mbuf for the M_VLANTAG flag to see if a VLAN tag is present and valid: if (m->m_flags & M_VLANTAG) { ... = m->m_pkthdr.ether_vtag; /* htons()? */ ... pass tag to hardware ... } VLAN tags are stored in host byte order. Byte swapping may be necessary. (Note: This driver conversion was mechanic and did not add or remove any byte swapping in the drivers.) Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag memory allocation have to be done. Reviewed by: thompsa, yar Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
if (m_head->m_flags & M_VLANTAG)
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
vlan_tag_flags |= (TX_BD_FLAGS_VLAN_TAG |
Move ethernet VLAN tags from mtags to its own mbuf packet header field m_pkthdr.ether_vlan. The presence of the M_VLANTAG flag on the mbuf signifies the presence and validity of its content. Drivers that support hardware VLAN tag stripping fill in the received VLAN tag (containing both vlan and priority information) into the ether_vtag mbuf packet header field: m->m_pkthdr.ether_vtag = vlan_id; /* ntohs()? */ m->m_flags |= M_VLANTAG; to mark the packet m with the specified VLAN tag. On output the driver should check the mbuf for the M_VLANTAG flag to see if a VLAN tag is present and valid: if (m->m_flags & M_VLANTAG) { ... = m->m_pkthdr.ether_vtag; /* htons()? */ ... pass tag to hardware ... } VLAN tags are stored in host byte order. Byte swapping may be necessary. (Note: This driver conversion was mechanic and did not add or remove any byte swapping in the drivers.) Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition. No more tag memory allocation have to be done. Reviewed by: thompsa, yar Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
(m_head->m_pkthdr.ether_vtag << 16));
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
/* Map the mbuf into DMAable memory. */
map = sc->tx_mbuf_map[*chain_prod];
map_arg.sc = sc;
map_arg.prod = *prod;
map_arg.chain_prod = *chain_prod;
map_arg.prod_bseq = *prod_bseq;
map_arg.tx_flags = vlan_tag_flags;
map_arg.maxsegs = USABLE_TX_BD - sc->used_tx_bd -
BCE_TX_SLACK_SPACE;
KASSERT(map_arg.maxsegs > 0, ("Invalid TX maxsegs value!"));
for (i = 0; i < TX_PAGES; i++)
map_arg.tx_chain[i] = sc->tx_bd_chain[i];
/* Map the mbuf into our DMA address space. */
error = bus_dmamap_load_mbuf(sc->tx_mbuf_tag, map, m_head,
bce_dma_map_tx_desc, &map_arg, BUS_DMA_NOWAIT);
if (error || map_arg.maxsegs == 0) {
Log: - Removed updates to if_ibytes, if_obytes, if_imcasts, and if_omcasts. These should not be handled by the driver. - Add code to handle excessively fragmented mbufs when mapping TX frames. Reviewed by: ps Approved by: ps (mentor) MFC after: 1 week
2006-06-08 18:31:21 +00:00
/* Try to defrag the mbuf if there are too many segments. */
if (error == EFBIG && map_arg.maxsegs != 0) {
struct mbuf *m0;
DBPRINT(sc, BCE_WARN, "%s(): fragmented mbuf (%d pieces)\n",
__FUNCTION__, map_arg.maxsegs);
m0 = m_defrag(m_head, M_DONTWAIT);
if (m0 != NULL) {
m_head = m0;
error = bus_dmamap_load_mbuf(sc->tx_mbuf_tag,
map, m_head, bce_dma_map_tx_desc, &map_arg,
BUS_DMA_NOWAIT);
}
}
/* Still getting an error after a defrag. */
if (error) {
BCE_PRINTF(sc,
"%s(%d): Error mapping mbuf into TX chain!\n",
__FILE__, __LINE__);
rc = ENOBUFS;
goto bce_tx_encap_exit;
}
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
}
/*
* Ensure that the map for this transmission
* is placed at the array index of the last
* descriptor in this chain. This is done
* because a single map is used for all
* segments of the mbuf and we don't want to
* delete the map before all of the segments
* have been freed.
*/
sc->tx_mbuf_map[*chain_prod] =
sc->tx_mbuf_map[map_arg.chain_prod];
sc->tx_mbuf_map[map_arg.chain_prod] = map;
sc->tx_mbuf_ptr[map_arg.chain_prod] = m_head;
sc->used_tx_bd += map_arg.maxsegs;
DBRUNIF((sc->used_tx_bd > sc->tx_hi_watermark),
sc->tx_hi_watermark = sc->used_tx_bd);
DBRUNIF(1, sc->tx_mbuf_alloc++);
DBRUN(BCE_VERBOSE_SEND, bce_dump_tx_mbuf_chain(sc, *chain_prod,
map_arg.maxsegs));
/* prod still points the last used tx_bd at this point. */
*prod = map_arg.prod;
*chain_prod = map_arg.chain_prod;
*prod_bseq = map_arg.prod_bseq;
bce_tx_encap_exit:
return(rc);
}
/****************************************************************************/
/* Main transmit routine when called from another routine with a lock. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_start_locked(struct ifnet *ifp)
{
struct bce_softc *sc = ifp->if_softc;
struct mbuf *m_head = NULL;
int count = 0;
u16 tx_prod, tx_chain_prod;
u32 tx_prod_bseq;
/* If there's no link or the transmit queue is empty then just exit. */
if (!sc->bce_link || IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
DBPRINT(sc, BCE_INFO_SEND, "%s(): No link or transmit queue empty.\n",
__FUNCTION__);
goto bce_start_locked_exit;
}
/* prod points to the next free tx_bd. */
tx_prod = sc->tx_prod;
tx_chain_prod = TX_CHAIN_IDX(tx_prod);
tx_prod_bseq = sc->tx_prod_bseq;
DBPRINT(sc, BCE_INFO_SEND,
"%s(): Start: tx_prod = 0x%04X, tx_chain_prod = %04X, "
"tx_prod_bseq = 0x%08X\n",
__FUNCTION__, tx_prod, tx_chain_prod, tx_prod_bseq);
/* Keep adding entries while there is space in the ring. */
while(sc->tx_mbuf_ptr[tx_chain_prod] == NULL) {
/* Check for any frames to send. */
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
/*
* Pack the data into the transmit ring. If we
* don't have room, place the mbuf back at the
* head of the queue and set the OACTIVE flag
* to wait for the NIC to drain the chain.
*/
if (bce_tx_encap(sc, m_head, &tx_prod, &tx_chain_prod, &tx_prod_bseq)) {
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
DBPRINT(sc, BCE_INFO_SEND,
"TX chain is closed for business! Total tx_bd used = %d\n",
sc->used_tx_bd);
break;
}
count++;
/* Send a copy of the frame to any BPF listeners. */
BPF_MTAP(ifp, m_head);
tx_prod = NEXT_TX_BD(tx_prod);
tx_chain_prod = TX_CHAIN_IDX(tx_prod);
}
if (count == 0) {
/* no packets were dequeued */
DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): No packets were dequeued\n",
__FUNCTION__);
goto bce_start_locked_exit;
}
/* Update the driver's counters. */
sc->tx_prod = tx_prod;
sc->tx_prod_bseq = tx_prod_bseq;
DBPRINT(sc, BCE_INFO_SEND,
"%s(): End: tx_prod = 0x%04X, tx_chain_prod = 0x%04X, "
"tx_prod_bseq = 0x%08X\n",
__FUNCTION__, tx_prod, tx_chain_prod, tx_prod_bseq);
/* Start the transmit. */
REG_WR16(sc, MB_TX_CID_ADDR + BCE_L2CTX_TX_HOST_BIDX, sc->tx_prod);
REG_WR(sc, MB_TX_CID_ADDR + BCE_L2CTX_TX_HOST_BSEQ, sc->tx_prod_bseq);
/* Set the tx timeout. */
ifp->if_timer = BCE_TX_TIMEOUT;
bce_start_locked_exit:
return;
}
/****************************************************************************/
/* Main transmit routine when called from another routine without a lock. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_start(struct ifnet *ifp)
{
struct bce_softc *sc = ifp->if_softc;
BCE_LOCK(sc);
bce_start_locked(ifp);
BCE_UNLOCK(sc);
}
/****************************************************************************/
/* Handles any IOCTL calls from the operating system. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
{
struct bce_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
struct mii_data *mii;
int mask, error = 0;
DBPRINT(sc, BCE_VERBOSE_RESET, "Entering %s()\n", __FUNCTION__);
switch(command) {
/* Set the MTU. */
case SIOCSIFMTU:
/* Check that the MTU setting is supported. */
if ((ifr->ifr_mtu < BCE_MIN_MTU) ||
(ifr->ifr_mtu > BCE_MAX_JUMBO_MTU)) {
error = EINVAL;
break;
}
DBPRINT(sc, BCE_INFO, "Setting new MTU of %d\n", ifr->ifr_mtu);
Expand locking coverage slightly to cover if_drv_flags in a few places where it wasn't locked. MFC after: 3 days Reviewed by: davidch
2006-07-20 18:41:00 +00:00
BCE_LOCK(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
ifp->if_mtu = ifr->ifr_mtu;
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
Expand locking coverage slightly to cover if_drv_flags in a few places where it wasn't locked. MFC after: 3 days Reviewed by: davidch
2006-07-20 18:41:00 +00:00
bce_init_locked(sc);
BCE_UNLOCK(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
break;
/* Set interface. */
case SIOCSIFFLAGS:
DBPRINT(sc, BCE_VERBOSE, "Received SIOCSIFFLAGS\n");
BCE_LOCK(sc);
/* Check if the interface is up. */
if (ifp->if_flags & IFF_UP) {
Fix ifconfig up when the HW was down. If the driver isn't running then we need to call init otherwise just start the rx. Interestingly dhclient seemed to work but ifconfig <IP> didn't for me. Reviewed by: jhb
2006-07-12 23:13:09 +00:00
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
/* Change the promiscuous/multicast flags as necessary. */
bce_set_rx_mode(sc);
} else {
/* Start the HW */
bce_init_locked(sc);
}
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
} else {
/* The interface is down. Check if the driver is running. */
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
bce_stop(sc);
}
}
BCE_UNLOCK(sc);
error = 0;
break;
/* Add/Delete multicast address */
case SIOCADDMULTI:
case SIOCDELMULTI:
DBPRINT(sc, BCE_VERBOSE, "Received SIOCADDMULTI/SIOCDELMULTI\n");
Expand locking coverage slightly to cover if_drv_flags in a few places where it wasn't locked. MFC after: 3 days Reviewed by: davidch
2006-07-20 18:41:00 +00:00
BCE_LOCK(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
bce_set_rx_mode(sc);
error = 0;
}
Expand locking coverage slightly to cover if_drv_flags in a few places where it wasn't locked. MFC after: 3 days Reviewed by: davidch
2006-07-20 18:41:00 +00:00
BCE_UNLOCK(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
break;
/* Set/Get Interface media */
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
DBPRINT(sc, BCE_VERBOSE, "Received SIOCSIFMEDIA/SIOCGIFMEDIA\n");
DBPRINT(sc, BCE_VERBOSE, "bce_phy_flags = 0x%08X\n",
sc->bce_phy_flags);
if (sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) {
DBPRINT(sc, BCE_VERBOSE, "SerDes media set/get\n");
error = ifmedia_ioctl(ifp, ifr,
&sc->bce_ifmedia, command);
} else {
DBPRINT(sc, BCE_VERBOSE, "Copper media set/get\n");
mii = device_get_softc(sc->bce_miibus);
error = ifmedia_ioctl(ifp, ifr,
&mii->mii_media, command);
}
break;
/* Set interface capability */
case SIOCSIFCAP:
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
DBPRINT(sc, BCE_INFO, "Received SIOCSIFCAP = 0x%08X\n", (u32) mask);
#ifdef DEVICE_POLLING
if (mask & IFCAP_POLLING) {
if (ifr->ifr_reqcap & IFCAP_POLLING) {
/* Setup the poll routine to call. */
error = ether_poll_register(bce_poll, ifp);
if (error) {
BCE_PRINTF(sc, "%s(%d): Error registering poll function!\n",
__FILE__, __LINE__);
goto bce_ioctl_exit;
}
/* Clear the interrupt. */
BCE_LOCK(sc);
bce_disable_intr(sc);
REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP,
(1 << 16) | sc->bce_rx_quick_cons_trip);
REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP,
(1 << 16) | sc->bce_tx_quick_cons_trip);
ifp->if_capenable |= IFCAP_POLLING;
BCE_UNLOCK(sc);
} else {
/* Clear the poll routine. */
error = ether_poll_deregister(ifp);
/* Enable interrupt even in error case */
BCE_LOCK(sc);
bce_enable_intr(sc);
REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP,
(sc->bce_tx_quick_cons_trip_int << 16) |
sc->bce_tx_quick_cons_trip);
REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP,
(sc->bce_rx_quick_cons_trip_int << 16) |
sc->bce_rx_quick_cons_trip);
ifp->if_capenable &= ~IFCAP_POLLING;
BCE_UNLOCK(sc);
}
}
#endif /*DEVICE_POLLING */
/* Toggle the TX checksum capabilites enable flag. */
if (mask & IFCAP_TXCSUM) {
ifp->if_capenable ^= IFCAP_TXCSUM;
if (IFCAP_TXCSUM & ifp->if_capenable)
ifp->if_hwassist = BCE_IF_HWASSIST;
else
ifp->if_hwassist = 0;
}
/* Toggle the RX checksum capabilities enable flag. */
if (mask & IFCAP_RXCSUM) {
ifp->if_capenable ^= IFCAP_RXCSUM;
if (IFCAP_RXCSUM & ifp->if_capenable)
ifp->if_hwassist = BCE_IF_HWASSIST;
else
ifp->if_hwassist = 0;
}
/* Toggle VLAN_MTU capabilities enable flag. */
if (mask & IFCAP_VLAN_MTU) {
BCE_PRINTF(sc, "%s(%d): Changing VLAN_MTU not supported.\n",
__FILE__, __LINE__);
}
/* Toggle VLANHWTAG capabilities enabled flag. */
if (mask & IFCAP_VLAN_HWTAGGING) {
if (sc->bce_flags & BCE_MFW_ENABLE_FLAG)
BCE_PRINTF(sc, "%s(%d): Cannot change VLAN_HWTAGGING while "
"management firmware (ASF/IPMI/UMP) is running!\n",
__FILE__, __LINE__);
else
BCE_PRINTF(sc, "%s(%d): Changing VLAN_HWTAGGING not supported!\n",
__FILE__, __LINE__);
}
break;
default:
DBPRINT(sc, BCE_INFO, "Received unsupported IOCTL: 0x%08X\n",
(u32) command);
/* We don't know how to handle the IOCTL, pass it on. */
error = ether_ioctl(ifp, command, data);
break;
}
Fix DEVICE_POLLING support (compile-only tested).
2006-04-13 14:12:26 +00:00
#ifdef DEVICE_POLLING
bce_ioctl_exit:
#endif
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
DBPRINT(sc, BCE_VERBOSE_RESET, "Exiting %s()\n", __FUNCTION__);
return(error);
}
/****************************************************************************/
/* Transmit timeout handler. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_watchdog(struct ifnet *ifp)
{
struct bce_softc *sc = ifp->if_softc;
DBRUN(BCE_WARN_SEND,
bce_dump_driver_state(sc);
bce_dump_status_block(sc));
BCE_PRINTF(sc, "%s(%d): Watchdog timeout occurred, resetting!\n",
__FILE__, __LINE__);
/* DBRUN(BCE_FATAL, bce_breakpoint(sc)); */
Expand locking coverage slightly to cover if_drv_flags in a few places where it wasn't locked. MFC after: 3 days Reviewed by: davidch
2006-07-20 18:41:00 +00:00
BCE_LOCK(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
Expand locking coverage slightly to cover if_drv_flags in a few places where it wasn't locked. MFC after: 3 days Reviewed by: davidch
2006-07-20 18:41:00 +00:00
bce_init_locked(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
ifp->if_oerrors++;
Expand locking coverage slightly to cover if_drv_flags in a few places where it wasn't locked. MFC after: 3 days Reviewed by: davidch
2006-07-20 18:41:00 +00:00
BCE_UNLOCK(sc);
Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapeter. Submitted by: David Christensen
2006-04-10 19:55:23 +00:00
}
#ifdef DEVICE_POLLING
static void
bce_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
struct bce_softc *sc = ifp->if_softc;
BCE_LOCK_ASSERT(sc);
sc->bce_rxcycles = count;
bus_dmamap_sync(sc->status_tag, sc->status_map,
BUS_DMASYNC_POSTWRITE);
/* Check for any completed RX frames. */
if (sc->status_block->status_rx_quick_consumer_index0 !=
sc->hw_rx_cons)
bce_rx_intr(sc);
/* Check for any completed TX frames. */
if (sc->status_block->status_tx_quick_consumer_index0 !=
sc->hw_tx_cons)
bce_tx_intr(sc);
/* Check for new frames to transmit. */
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
bce_start_locked(ifp);
}
static void
bce_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
struct bce_softc *sc = ifp->if_softc;
BCE_LOCK(sc);
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
bce_poll_locked(ifp, cmd, count);
BCE_UNLOCK(sc);
}
#endif /* DEVICE_POLLING */
#if 0
static inline int
bce_has_work(struct bce_softc *sc)
{
struct status_block *stat = sc->status_block;
if ((stat->status_rx_quick_consumer_index0 != sc->hw_rx_cons) ||
(stat->status_tx_quick_consumer_index0 != sc->hw_tx_cons))
return 1;
if (((stat->status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) != 0) !=
bp->link_up)
return 1;
return 0;
}
#endif
/*
* Interrupt handler.
*/
/****************************************************************************/
/* Main interrupt entry point. Verifies that the controller generated the */
/* interrupt and then calls a separate routine for handle the various */
/* interrupt causes (PHY, TX, RX). */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static void
bce_intr(void *xsc)
{
struct bce_softc *sc;
struct ifnet *ifp;
u32 status_attn_bits;
sc = xsc;
ifp = sc->bce_ifp;
BCE_LOCK(sc);
DBRUNIF(1, sc->interrupts_generated++);
#ifdef DEVICE_POLLING
if (ifp->if_capenable & IFCAP_POLLING) {
DBPRINT(sc, BCE_INFO, "Polling enabled!\n");
goto bce_intr_exit;
}
#endif
bus_dmamap_sync(sc->status_tag, sc->status_map,
BUS_DMASYNC_POSTWRITE);
/*
* If the hardware status block index
* matches the last value read by the
* driver and we haven't asserted our
* interrupt then there's nothing to do.
*/
if ((sc->status_block->status_idx == sc->last_status_idx) &&
(REG_RD(sc, BCE_PCICFG_MISC_STATUS) & BCE_PCICFG_MISC_STATUS_INTA_VALUE))
goto bce_intr_exit;
/* Ack the interrupt and stop others from occuring. */
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
BCE_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
BCE_PCICFG_INT_ACK_CMD_MASK_INT);
/* Keep processing data as long as there is work to do. */
for (;;) {
status_attn_bits = sc->status_block->status_attn_bits;
DBRUNIF(DB_RANDOMTRUE(bce_debug_unexpected_attention),
BCE_PRINTF(sc, "Simulating unexpected status attention bit set.");
status_attn_bits = status_attn_bits | STATUS_ATTN_BITS_PARITY_ERROR);
/* Was it a link change interrupt? */
if ((status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) !=
(sc->status_block->status_attn_bits_ack & STATUS_ATTN_BITS_LINK_STATE))
bce_phy_intr(sc);
/* If any other attention is asserted then the chip is toast. */
if (((status_attn_bits & ~STATUS_ATTN_BITS_LINK_STATE) !=
(sc->status_block->status_attn_bits_ack &
~STATUS_ATTN_BITS_LINK_STATE))) {
DBRUN(1, sc->unexpected_attentions++);
BCE_PRINTF(sc, "%s(%d): Fatal attention detected: 0x%08X\n",
__FILE__, __LINE__, sc->status_block->status_attn_bits);
DBRUN(BCE_FATAL,
if (bce_debug_unexpected_attention == 0)
bce_breakpoint(sc));
bce_init_locked(sc);
goto bce_intr_exit;
}
/* Check for any completed RX frames. */
if (sc->status_block->status_rx_quick_consumer_index0 != sc->hw_rx_cons)
bce_rx_intr(sc);
/* Check for any completed TX frames. */
if (sc->status_block->status_tx_quick_consumer_index0 != sc->hw_tx_cons)
bce_tx_intr(sc);
/* Save the status block index value for use during the next interrupt. */
sc->last_status_idx = sc->status_block->status_idx;
/* Prevent speculative reads from getting ahead of the status block. */
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
BUS_SPACE_BARRIER_READ);
/* If there's no work left then exit the interrupt service routine. */
if ((sc->status_block->status_rx_quick_consumer_index0 == sc->hw_rx_cons) &&
(sc->status_block->status_tx_quick_consumer_index0 == sc->hw_tx_cons))
break;
}
bus_dmamap_sync(sc->status_tag, sc->status_map,
BUS_DMASYNC_PREWRITE);
/* Re-enable interrupts. */
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx |
BCE_PCICFG_INT_ACK_CMD_MASK_INT);
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx);
/* Handle any frames that arrived while handling the interrupt. */
if (ifp->if_drv_flags & IFF_DRV_RUNNING && !IFQ_DRV_IS_EMPTY(&ifp->if_snd))
bce_start_locked(ifp);
bce_intr_exit:
BCE_UNLOCK(sc);
}
/****************************************************************************/
/* Programs the various packet receive modes (broadcast and multicast). */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_set_rx_mode(struct bce_softc *sc)
{
struct ifnet *ifp;
struct ifmultiaddr *ifma;
u32 hashes[4] = { 0, 0, 0, 0 };
u32 rx_mode, sort_mode;
int h, i;
BCE_LOCK_ASSERT(sc);
ifp = sc->bce_ifp;
/* Initialize receive mode default settings. */
rx_mode = sc->rx_mode & ~(BCE_EMAC_RX_MODE_PROMISCUOUS |
BCE_EMAC_RX_MODE_KEEP_VLAN_TAG);
sort_mode = 1 | BCE_RPM_SORT_USER0_BC_EN;
/*
* ASF/IPMI/UMP firmware requires that VLAN tag stripping
* be enbled.
*/
if (!(BCE_IF_CAPABILITIES & IFCAP_VLAN_HWTAGGING) &&
(!(sc->bce_flags & BCE_MFW_ENABLE_FLAG)))
rx_mode |= BCE_EMAC_RX_MODE_KEEP_VLAN_TAG;
/*
* Check for promiscuous, all multicast, or selected
* multicast address filtering.
*/
if (ifp->if_flags & IFF_PROMISC) {
DBPRINT(sc, BCE_INFO, "Enabling promiscuous mode.\n");
/* Enable promiscuous mode. */
rx_mode |= BCE_EMAC_RX_MODE_PROMISCUOUS;
sort_mode |= BCE_RPM_SORT_USER0_PROM_EN;
} else if (ifp->if_flags & IFF_ALLMULTI) {
DBPRINT(sc, BCE_INFO, "Enabling all multicast mode.\n");
/* Enable all multicast addresses. */
for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
REG_WR(sc, BCE_EMAC_MULTICAST_HASH0 + (i * 4), 0xffffffff);
}
sort_mode |= BCE_RPM_SORT_USER0_MC_EN;
} else {
/* Accept one or more multicast(s). */
DBPRINT(sc, BCE_INFO, "Enabling selective multicast mode.\n");
IF_ADDR_LOCK(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
h = ether_crc32_le(LLADDR((struct sockaddr_dl *)
ifma->ifma_addr), ETHER_ADDR_LEN) & 0x7F;
hashes[(h & 0x60) >> 5] |= 1 << (h & 0x1F);
}
IF_ADDR_UNLOCK(ifp);
for (i = 0; i < 4; i++)
REG_WR(sc, BCE_EMAC_MULTICAST_HASH0 + (i * 4), hashes[i]);
sort_mode |= BCE_RPM_SORT_USER0_MC_HSH_EN;
}
/* Only make changes if the recive mode has actually changed. */
if (rx_mode != sc->rx_mode) {
DBPRINT(sc, BCE_VERBOSE, "Enabling new receive mode: 0x%08X\n",
rx_mode);
sc->rx_mode = rx_mode;
REG_WR(sc, BCE_EMAC_RX_MODE, rx_mode);
}
/* Disable and clear the exisitng sort before enabling a new sort. */
REG_WR(sc, BCE_RPM_SORT_USER0, 0x0);
REG_WR(sc, BCE_RPM_SORT_USER0, sort_mode);
REG_WR(sc, BCE_RPM_SORT_USER0, sort_mode | BCE_RPM_SORT_USER0_ENA);
}
/****************************************************************************/
/* Called periodically to updates statistics from the controllers */
/* statistics block. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_stats_update(struct bce_softc *sc)
{
struct ifnet *ifp;
struct statistics_block *stats;
DBPRINT(sc, BCE_EXCESSIVE, "Entering %s()\n", __FUNCTION__);
ifp = sc->bce_ifp;
stats = (struct statistics_block *) sc->stats_block;
/*
* Update the interface statistics from the
* hardware statistics.
*/
ifp->if_collisions = (u_long) stats->stat_EtherStatsCollisions;
ifp->if_ierrors = (u_long) stats->stat_EtherStatsUndersizePkts +
(u_long) stats->stat_EtherStatsOverrsizePkts +
(u_long) stats->stat_IfInMBUFDiscards +
(u_long) stats->stat_Dot3StatsAlignmentErrors +
(u_long) stats->stat_Dot3StatsFCSErrors;
ifp->if_oerrors = (u_long) stats->stat_emac_tx_stat_dot3statsinternalmactransmiterrors +
(u_long) stats->stat_Dot3StatsExcessiveCollisions +
(u_long) stats->stat_Dot3StatsLateCollisions;
/*
* Certain controllers don't report
* carrier sense errors correctly.
* See errata E11_5708CA0_1165.
*/
if (!(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) &&
!(BCE_CHIP_ID(sc) == BCE_CHIP_ID_5708_A0))
ifp->if_oerrors += (u_long) stats->stat_Dot3StatsCarrierSenseErrors;
/*
* Update the sysctl statistics from the
* hardware statistics.
*/
sc->stat_IfHCInOctets =
((u64) stats->stat_IfHCInOctets_hi << 32) +
(u64) stats->stat_IfHCInOctets_lo;
sc->stat_IfHCInBadOctets =
((u64) stats->stat_IfHCInBadOctets_hi << 32) +
(u64) stats->stat_IfHCInBadOctets_lo;
sc->stat_IfHCOutOctets =
((u64) stats->stat_IfHCOutOctets_hi << 32) +
(u64) stats->stat_IfHCOutOctets_lo;
sc->stat_IfHCOutBadOctets =
((u64) stats->stat_IfHCOutBadOctets_hi << 32) +
(u64) stats->stat_IfHCOutBadOctets_lo;
sc->stat_IfHCInUcastPkts =
((u64) stats->stat_IfHCInUcastPkts_hi << 32) +
(u64) stats->stat_IfHCInUcastPkts_lo;
sc->stat_IfHCInMulticastPkts =
((u64) stats->stat_IfHCInMulticastPkts_hi << 32) +
(u64) stats->stat_IfHCInMulticastPkts_lo;
sc->stat_IfHCInBroadcastPkts =
((u64) stats->stat_IfHCInBroadcastPkts_hi << 32) +
(u64) stats->stat_IfHCInBroadcastPkts_lo;
sc->stat_IfHCOutUcastPkts =
((u64) stats->stat_IfHCOutUcastPkts_hi << 32) +
(u64) stats->stat_IfHCOutUcastPkts_lo;
sc->stat_IfHCOutMulticastPkts =
((u64) stats->stat_IfHCOutMulticastPkts_hi << 32) +
(u64) stats->stat_IfHCOutMulticastPkts_lo;
sc->stat_IfHCOutBroadcastPkts =
((u64) stats->stat_IfHCOutBroadcastPkts_hi << 32) +
(u64) stats->stat_IfHCOutBroadcastPkts_lo;
sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors =
stats->stat_emac_tx_stat_dot3statsinternalmactransmiterrors;
sc->stat_Dot3StatsCarrierSenseErrors =
stats->stat_Dot3StatsCarrierSenseErrors;
sc->stat_Dot3StatsFCSErrors =
stats->stat_Dot3StatsFCSErrors;
sc->stat_Dot3StatsAlignmentErrors =
stats->stat_Dot3StatsAlignmentErrors;
sc->stat_Dot3StatsSingleCollisionFrames =
stats->stat_Dot3StatsSingleCollisionFrames;
sc->stat_Dot3StatsMultipleCollisionFrames =
stats->stat_Dot3StatsMultipleCollisionFrames;
sc->stat_Dot3StatsDeferredTransmissions =
stats->stat_Dot3StatsDeferredTransmissions;
sc->stat_Dot3StatsExcessiveCollisions =
stats->stat_Dot3StatsExcessiveCollisions;
sc->stat_Dot3StatsLateCollisions =
stats->stat_Dot3StatsLateCollisions;
sc->stat_EtherStatsCollisions =
stats->stat_EtherStatsCollisions;
sc->stat_EtherStatsFragments =
stats->stat_EtherStatsFragments;
sc->stat_EtherStatsJabbers =
stats->stat_EtherStatsJabbers;
sc->stat_EtherStatsUndersizePkts =
stats->stat_EtherStatsUndersizePkts;
sc->stat_EtherStatsOverrsizePkts =
stats->stat_EtherStatsOverrsizePkts;
sc->stat_EtherStatsPktsRx64Octets =
stats->stat_EtherStatsPktsRx64Octets;
sc->stat_EtherStatsPktsRx65Octetsto127Octets =
stats->stat_EtherStatsPktsRx65Octetsto127Octets;
sc->stat_EtherStatsPktsRx128Octetsto255Octets =
stats->stat_EtherStatsPktsRx128Octetsto255Octets;
sc->stat_EtherStatsPktsRx256Octetsto511Octets =
stats->stat_EtherStatsPktsRx256Octetsto511Octets;
sc->stat_EtherStatsPktsRx512Octetsto1023Octets =
stats->stat_EtherStatsPktsRx512Octetsto1023Octets;
sc->stat_EtherStatsPktsRx1024Octetsto1522Octets =
stats->stat_EtherStatsPktsRx1024Octetsto1522Octets;
sc->stat_EtherStatsPktsRx1523Octetsto9022Octets =
stats->stat_EtherStatsPktsRx1523Octetsto9022Octets;
sc->stat_EtherStatsPktsTx64Octets =
stats->stat_EtherStatsPktsTx64Octets;
sc->stat_EtherStatsPktsTx65Octetsto127Octets =
stats->stat_EtherStatsPktsTx65Octetsto127Octets;
sc->stat_EtherStatsPktsTx128Octetsto255Octets =
stats->stat_EtherStatsPktsTx128Octetsto255Octets;
sc->stat_EtherStatsPktsTx256Octetsto511Octets =
stats->stat_EtherStatsPktsTx256Octetsto511Octets;
sc->stat_EtherStatsPktsTx512Octetsto1023Octets =
stats->stat_EtherStatsPktsTx512Octetsto1023Octets;
sc->stat_EtherStatsPktsTx1024Octetsto1522Octets =
stats->stat_EtherStatsPktsTx1024Octetsto1522Octets;
sc->stat_EtherStatsPktsTx1523Octetsto9022Octets =
stats->stat_EtherStatsPktsTx1523Octetsto9022Octets;
sc->stat_XonPauseFramesReceived =
stats->stat_XonPauseFramesReceived;
sc->stat_XoffPauseFramesReceived =
stats->stat_XoffPauseFramesReceived;
sc->stat_OutXonSent =
stats->stat_OutXonSent;
sc->stat_OutXoffSent =
stats->stat_OutXoffSent;
sc->stat_FlowControlDone =
stats->stat_FlowControlDone;
sc->stat_MacControlFramesReceived =
stats->stat_MacControlFramesReceived;
sc->stat_XoffStateEntered =
stats->stat_XoffStateEntered;
sc->stat_IfInFramesL2FilterDiscards =
stats->stat_IfInFramesL2FilterDiscards;
sc->stat_IfInRuleCheckerDiscards =
stats->stat_IfInRuleCheckerDiscards;
sc->stat_IfInFTQDiscards =
stats->stat_IfInFTQDiscards;
sc->stat_IfInMBUFDiscards =
stats->stat_IfInMBUFDiscards;
sc->stat_IfInRuleCheckerP4Hit =
stats->stat_IfInRuleCheckerP4Hit;
sc->stat_CatchupInRuleCheckerDiscards =
stats->stat_CatchupInRuleCheckerDiscards;
sc->stat_CatchupInFTQDiscards =
stats->stat_CatchupInFTQDiscards;
sc->stat_CatchupInMBUFDiscards =
stats->stat_CatchupInMBUFDiscards;
sc->stat_CatchupInRuleCheckerP4Hit =
stats->stat_CatchupInRuleCheckerP4Hit;
DBPRINT(sc, BCE_EXCESSIVE, "Exiting %s()\n", __FUNCTION__);
}
static void
bce_tick_locked(struct bce_softc *sc)
{
struct mii_data *mii = NULL;
struct ifnet *ifp;
u32 msg;
ifp = sc->bce_ifp;
BCE_LOCK_ASSERT(sc);
/* Tell the firmware that the driver is still running. */
#ifdef BCE_DEBUG
msg = (u32) BCE_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE;
#else
msg = (u32) ++sc->bce_fw_drv_pulse_wr_seq;
#endif
REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_PULSE_MB, msg);
/* Update the statistics from the hardware statistics block. */
bce_stats_update(sc);
/* Schedule the next tick. */
callout_reset(
&sc->bce_stat_ch, /* callout */
hz, /* ticks */
bce_tick, /* function */
sc); /* function argument */
/* If link is up already up then we're done. */
if (sc->bce_link)
goto bce_tick_locked_exit;
/* DRC - ToDo: Add SerDes support and check SerDes link here. */
mii = device_get_softc(sc->bce_miibus);
mii_tick(mii);
/* Check if the link has come up. */
if (!sc->bce_link && mii->mii_media_status & IFM_ACTIVE &&
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
sc->bce_link++;
if ((IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T ||
IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) &&
bootverbose)
BCE_PRINTF(sc, "Gigabit link up\n");
/* Now that link is up, handle any outstanding TX traffic. */
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
bce_start_locked(ifp);
}
bce_tick_locked_exit:
return;
}
static void
bce_tick(void *xsc)
{
struct bce_softc *sc;
sc = xsc;
BCE_LOCK(sc);
bce_tick_locked(sc);
BCE_UNLOCK(sc);
}
#ifdef BCE_DEBUG
/****************************************************************************/
/* Allows the driver state to be dumped through the sysctl interface. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_sysctl_driver_state(SYSCTL_HANDLER_ARGS)
{
int error;
int result;
struct bce_softc *sc;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1) {
sc = (struct bce_softc *)arg1;
bce_dump_driver_state(sc);
}
return error;
}
/****************************************************************************/
/* Allows the hardware state to be dumped through the sysctl interface. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_sysctl_hw_state(SYSCTL_HANDLER_ARGS)
{
int error;
int result;
struct bce_softc *sc;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1) {
sc = (struct bce_softc *)arg1;
bce_dump_hw_state(sc);
}
return error;
}
/****************************************************************************/
/* */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_sysctl_dump_rx_chain(SYSCTL_HANDLER_ARGS)
{
int error;
int result;
struct bce_softc *sc;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1) {
sc = (struct bce_softc *)arg1;
bce_dump_rx_chain(sc, 0, USABLE_RX_BD);
}
return error;
}
/****************************************************************************/
/* */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static int
bce_sysctl_breakpoint(SYSCTL_HANDLER_ARGS)
{
int error;
int result;
struct bce_softc *sc;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1) {
sc = (struct bce_softc *)arg1;
bce_breakpoint(sc);
}
return error;
}
#endif
/****************************************************************************/
/* Adds any sysctl parameters for tuning or debugging purposes. */
/* */
/* Returns: */
/* 0 for success, positive value for failure. */
/****************************************************************************/
static void
bce_add_sysctls(struct bce_softc *sc)
{
struct sysctl_ctx_list *ctx;
struct sysctl_oid_list *children;
ctx = device_get_sysctl_ctx(sc->bce_dev);
children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bce_dev));
SYSCTL_ADD_STRING(ctx, children, OID_AUTO,
"driver_version",
CTLFLAG_RD, &bce_driver_version,
0, "bce driver version");
#ifdef BCE_DEBUG
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
"rx_low_watermark",
CTLFLAG_RD, &sc->rx_low_watermark,
0, "Lowest level of free rx_bd's");
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
"tx_hi_watermark",
CTLFLAG_RD, &sc->tx_hi_watermark,
0, "Highest level of used tx_bd's");
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
"l2fhdr_status_errors",
CTLFLAG_RD, &sc->l2fhdr_status_errors,
0, "l2_fhdr status errors");
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
"unexpected_attentions",
CTLFLAG_RD, &sc->unexpected_attentions,
0, "unexpected attentions");
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
"lost_status_block_updates",
CTLFLAG_RD, &sc->lost_status_block_updates,
0, "lost status block updates");
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
"mbuf_alloc_failed",
CTLFLAG_RD, &sc->mbuf_alloc_failed,
0, "mbuf cluster allocation failures");
#endif
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHcInOctets",
CTLFLAG_RD, &sc->stat_IfHCInOctets,
"Bytes received");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCInBadOctets",
CTLFLAG_RD, &sc->stat_IfHCInBadOctets,
"Bad bytes received");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCOutOctets",
CTLFLAG_RD, &sc->stat_IfHCOutOctets,
"Bytes sent");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCOutBadOctets",
CTLFLAG_RD, &sc->stat_IfHCOutBadOctets,
"Bad bytes sent");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCInUcastPkts",
CTLFLAG_RD, &sc->stat_IfHCInUcastPkts,
"Unicast packets received");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCInMulticastPkts",
CTLFLAG_RD, &sc->stat_IfHCInMulticastPkts,
"Multicast packets received");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCInBroadcastPkts",
CTLFLAG_RD, &sc->stat_IfHCInBroadcastPkts,
"Broadcast packets received");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCOutUcastPkts",
CTLFLAG_RD, &sc->stat_IfHCOutUcastPkts,
"Unicast packets sent");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCOutMulticastPkts",
CTLFLAG_RD, &sc->stat_IfHCOutMulticastPkts,
"Multicast packets sent");
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
"stat_IfHCOutBroadcastPkts",
CTLFLAG_RD, &sc->stat_IfHCOutBroadcastPkts,
"Broadcast packets sent");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_emac_tx_stat_dot3statsinternalmactransmiterrors",
CTLFLAG_RD, &sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors,
0, "Internal MAC transmit errors");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_Dot3StatsCarrierSenseErrors",
CTLFLAG_RD, &sc->stat_Dot3StatsCarrierSenseErrors,
0, "Carrier sense errors");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_Dot3StatsFCSErrors",
CTLFLAG_RD, &sc->stat_Dot3StatsFCSErrors,
0, "Frame check sequence errors");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_Dot3StatsAlignmentErrors",
CTLFLAG_RD, &sc->stat_Dot3StatsAlignmentErrors,
0, "Alignment errors");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_Dot3StatsSingleCollisionFrames",
CTLFLAG_RD, &sc->stat_Dot3StatsSingleCollisionFrames,
0, "Single Collision Frames");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_Dot3StatsMultipleCollisionFrames",
CTLFLAG_RD, &sc->stat_Dot3StatsMultipleCollisionFrames,
0, "Multiple Collision Frames");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_Dot3StatsDeferredTransmissions",
CTLFLAG_RD, &sc->stat_Dot3StatsDeferredTransmissions,
0, "Deferred Transmissions");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_Dot3StatsExcessiveCollisions",
CTLFLAG_RD, &sc->stat_Dot3StatsExcessiveCollisions,
0, "Excessive Collisions");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_Dot3StatsLateCollisions",
CTLFLAG_RD, &sc->stat_Dot3StatsLateCollisions,
0, "Late Collisions");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsCollisions",
CTLFLAG_RD, &sc->stat_EtherStatsCollisions,
0, "Collisions");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsFragments",
CTLFLAG_RD, &sc->stat_EtherStatsFragments,
0, "Fragments");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsJabbers",
CTLFLAG_RD, &sc->stat_EtherStatsJabbers,
0, "Jabbers");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsUndersizePkts",
CTLFLAG_RD, &sc->stat_EtherStatsUndersizePkts,
0, "Undersize packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsOverrsizePkts",
CTLFLAG_RD, &sc->stat_EtherStatsOverrsizePkts,
0, "stat_EtherStatsOverrsizePkts");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsRx64Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx64Octets,
0, "Bytes received in 64 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsRx65Octetsto127Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx65Octetsto127Octets,
0, "Bytes received in 65 to 127 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsRx128Octetsto255Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx128Octetsto255Octets,
0, "Bytes received in 128 to 255 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsRx256Octetsto511Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx256Octetsto511Octets,
0, "Bytes received in 256 to 511 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsRx512Octetsto1023Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx512Octetsto1023Octets,
0, "Bytes received in 512 to 1023 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsRx1024Octetsto1522Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx1024Octetsto1522Octets,
0, "Bytes received in 1024 t0 1522 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsRx1523Octetsto9022Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx1523Octetsto9022Octets,
0, "Bytes received in 1523 to 9022 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsTx64Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx64Octets,
0, "Bytes sent in 64 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsTx65Octetsto127Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx65Octetsto127Octets,
0, "Bytes sent in 65 to 127 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsTx128Octetsto255Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx128Octetsto255Octets,
0, "Bytes sent in 128 to 255 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsTx256Octetsto511Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx256Octetsto511Octets,
0, "Bytes sent in 256 to 511 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsTx512Octetsto1023Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx512Octetsto1023Octets,
0, "Bytes sent in 512 to 1023 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsTx1024Octetsto1522Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx1024Octetsto1522Octets,
0, "Bytes sent in 1024 to 1522 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_EtherStatsPktsTx1523Octetsto9022Octets",
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx1523Octetsto9022Octets,
0, "Bytes sent in 1523 to 9022 byte packets");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_XonPauseFramesReceived",
CTLFLAG_RD, &sc->stat_XonPauseFramesReceived,
0, "XON pause frames receved");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_XoffPauseFramesReceived",
CTLFLAG_RD, &sc->stat_XoffPauseFramesReceived,
0, "XOFF pause frames received");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_OutXonSent",
CTLFLAG_RD, &sc->stat_OutXonSent,
0, "XON pause frames sent");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_OutXoffSent",
CTLFLAG_RD, &sc->stat_OutXoffSent,
0, "XOFF pause frames sent");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_FlowControlDone",
CTLFLAG_RD, &sc->stat_FlowControlDone,
0, "Flow control done");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_MacControlFramesReceived",
CTLFLAG_RD, &sc->stat_MacControlFramesReceived,
0, "MAC control frames received");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_XoffStateEntered",
CTLFLAG_RD, &sc->stat_XoffStateEntered,
0, "XOFF state entered");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_IfInFramesL2FilterDiscards",
CTLFLAG_RD, &sc->stat_IfInFramesL2FilterDiscards,
0, "Received L2 packets discarded");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_IfInRuleCheckerDiscards",
CTLFLAG_RD, &sc->stat_IfInRuleCheckerDiscards,
0, "Received packets discarded by rule");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_IfInFTQDiscards",
CTLFLAG_RD, &sc->stat_IfInFTQDiscards,
0, "Received packet FTQ discards");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_IfInMBUFDiscards",
CTLFLAG_RD, &sc->stat_IfInMBUFDiscards,
0, "Received packets discarded due to lack of controller buffer memory");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_IfInRuleCheckerP4Hit",
CTLFLAG_RD, &sc->stat_IfInRuleCheckerP4Hit,
0, "Received packets rule checker hits");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_CatchupInRuleCheckerDiscards",
CTLFLAG_RD, &sc->stat_CatchupInRuleCheckerDiscards,
0, "Received packets discarded in Catchup path");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_CatchupInFTQDiscards",
CTLFLAG_RD, &sc->stat_CatchupInFTQDiscards,
0, "Received packets discarded in FTQ in Catchup path");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_CatchupInMBUFDiscards",
CTLFLAG_RD, &sc->stat_CatchupInMBUFDiscards,
0, "Received packets discarded in controller buffer memory in Catchup path");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
"stat_CatchupInRuleCheckerP4Hit",
CTLFLAG_RD, &sc->stat_CatchupInRuleCheckerP4Hit,
0, "Received packets rule checker hits in Catchup path");
#ifdef BCE_DEBUG
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
"driver_state", CTLTYPE_INT | CTLFLAG_RW,
(void *)sc, 0,
bce_sysctl_driver_state, "I", "Drive state information");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
"hw_state", CTLTYPE_INT | CTLFLAG_RW,
(void *)sc, 0,
bce_sysctl_hw_state, "I", "Hardware state information");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
"dump_rx_chain", CTLTYPE_INT | CTLFLAG_RW,
(void *)sc, 0,
bce_sysctl_dump_rx_chain, "I", "Dump rx_bd chain");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
"breakpoint", CTLTYPE_INT | CTLFLAG_RW,
(void *)sc, 0,
bce_sysctl_breakpoint, "I", "Driver breakpoint");
#endif
}
/****************************************************************************/
/* BCE Debug Routines */
/****************************************************************************/
#ifdef BCE_DEBUG
/****************************************************************************/
/* Prints out information about an mbuf. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_dump_mbuf(struct bce_softc *sc, struct mbuf *m)
{
u32 val_hi, val_lo;
struct mbuf *mp = m;
if (m == NULL) {
/* Index out of range. */
printf("mbuf ptr is null!\n");
return;
}
while (mp) {
val_hi = BCE_ADDR_HI(mp);
val_lo = BCE_ADDR_LO(mp);
BCE_PRINTF(sc, "mbuf: vaddr = 0x%08X:%08X, m_len = %d, m_flags = ",
val_hi, val_lo, mp->m_len);
if (mp->m_flags & M_EXT)
printf("M_EXT ");
if (mp->m_flags & M_PKTHDR)
printf("M_PKTHDR ");
printf("\n");
if (mp->m_flags & M_EXT) {
val_hi = BCE_ADDR_HI(mp->m_ext.ext_buf);
val_lo = BCE_ADDR_LO(mp->m_ext.ext_buf);
BCE_PRINTF(sc, "- m_ext: vaddr = 0x%08X:%08X, ext_size = 0x%04X\n",
val_hi, val_lo, mp->m_ext.ext_size);
}
mp = mp->m_next;
}
}
/****************************************************************************/
/* Prints out the mbufs in the TX mbuf chain. */
/* */
/* Returns: */
/* Nothing. */
/****************************************************************************/
static void
bce_dump_tx_mbuf_chain(struct bce_softc *sc, int chain_prod, int count)
{
struct mbuf *m;
BCE_PRINTF(sc,
"----------------------------"
" tx mbuf data "
"----------------------------\n");
for (int i = 0; i < count; i++) {
m = sc->tx_mbuf_ptr[chain_prod];
BCE_PRINTF(sc, "txmbuf[%d]\n", chain_prod);
bce_dump_mbuf(sc, m);
chain_prod = TX_CHAIN_IDX(NEXT_TX_BD(chain_prod));
}
BCE_PRINTF(sc,
"----------------------------"
"----------------"
"----------------------------\n");
}
/*
* This routine prints the RX mbuf chain.
*/
static void
bce_dump_rx_mbuf_chain(struct bce_softc *sc, int chain_prod, int count)
{
struct mbuf *m;
BCE_PRINTF(sc,
"----------------------------"
" rx mbuf data "
"----------------------------\n");
for (int i = 0; i < count; i++) {
m = sc->rx_mbuf_ptr[chain_prod];
BCE_PRINTF(sc, "rxmbuf[0x%04X]\n", chain_prod);
bce_dump_mbuf(sc, m);
chain_prod = RX_CHAIN_IDX(NEXT_RX_BD(chain_prod));
}
BCE_PRINTF(sc,
"----------------------------"
"----------------"
"----------------------------\n");
}
static void
bce_dump_txbd(struct bce_softc *sc, int idx, struct tx_bd *txbd)
{
if (idx > MAX_TX_BD)
/* Index out of range. */
BCE_PRINTF(sc, "tx_bd[0x%04X]: Invalid tx_bd index!\n", idx);
else if ((idx & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
/* TX Chain page pointer. */
BCE_PRINTF(sc, "tx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page pointer\n",
idx, txbd->tx_bd_haddr_hi, txbd->tx_bd_haddr_lo);
else
/* Normal tx_bd entry. */
BCE_PRINTF(sc, "tx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = 0x%08X, "
"flags = 0x%08X\n", idx,
txbd->tx_bd_haddr_hi, txbd->tx_bd_haddr_lo,
txbd->tx_bd_mss_nbytes, txbd->tx_bd_vlan_tag_flags);
}
static void
bce_dump_rxbd(struct bce_softc *sc, int idx, struct rx_bd *rxbd)
{
if (idx > MAX_RX_BD)
/* Index out of range. */
BCE_PRINTF(sc, "rx_bd[0x%04X]: Invalid rx_bd index!\n", idx);
else if ((idx & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
/* TX Chain page pointer. */
BCE_PRINTF(sc, "rx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page pointer\n",
idx, rxbd->rx_bd_haddr_hi, rxbd->rx_bd_haddr_lo);
else
/* Normal tx_bd entry. */
BCE_PRINTF(sc, "rx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = 0x%08X, "
"flags = 0x%08X\n", idx,
rxbd->rx_bd_haddr_hi, rxbd->rx_bd_haddr_lo,
rxbd->rx_bd_len, rxbd->rx_bd_flags);
}
static void
bce_dump_l2fhdr(struct bce_softc *sc, int idx, struct l2_fhdr *l2fhdr)
{
BCE_PRINTF(sc, "l2_fhdr[0x%04X]: status = 0x%08X, "
"pkt_len = 0x%04X, vlan = 0x%04x, ip_xsum = 0x%04X, "
"tcp_udp_xsum = 0x%04X\n", idx,
l2fhdr->l2_fhdr_status, l2fhdr->l2_fhdr_pkt_len,
l2fhdr->l2_fhdr_vlan_tag, l2fhdr->l2_fhdr_ip_xsum,
l2fhdr->l2_fhdr_tcp_udp_xsum);
}
/*
* This routine prints the TX chain.
*/
static void
bce_dump_tx_chain(struct bce_softc *sc, int tx_prod, int count)
{
struct tx_bd *txbd;
/* First some info about the tx_bd chain structure. */
BCE_PRINTF(sc,
"----------------------------"
" tx_bd chain "
"----------------------------\n");
BCE_PRINTF(sc, "page size = 0x%08X, tx chain pages = 0x%08X\n",
(u32) BCM_PAGE_SIZE, (u32) TX_PAGES);
BCE_PRINTF(sc, "tx_bd per page = 0x%08X, usable tx_bd per page = 0x%08X\n",
(u32) TOTAL_TX_BD_PER_PAGE, (u32) USABLE_TX_BD_PER_PAGE);
BCE_PRINTF(sc, "total tx_bd = 0x%08X\n", (u32) TOTAL_TX_BD);
BCE_PRINTF(sc, ""
"-----------------------------"
" tx_bd data "
"-----------------------------\n");
/* Now print out the tx_bd's themselves. */
for (int i = 0; i < count; i++) {
txbd = &sc->tx_bd_chain[TX_PAGE(tx_prod)][TX_IDX(tx_prod)];
bce_dump_txbd(sc, tx_prod, txbd);
tx_prod = TX_CHAIN_IDX(NEXT_TX_BD(tx_prod));
}
BCE_PRINTF(sc,
"-----------------------------"
"--------------"
"-----------------------------\n");
}
/*
* This routine prints the RX chain.
*/
static void
bce_dump_rx_chain(struct bce_softc *sc, int rx_prod, int count)
{
struct rx_bd *rxbd;
/* First some info about the tx_bd chain structure. */
BCE_PRINTF(sc,
"----------------------------"
" rx_bd chain "
"----------------------------\n");
BCE_PRINTF(sc, "----- RX_BD Chain -----\n");
BCE_PRINTF(sc, "page size = 0x%08X, rx chain pages = 0x%08X\n",
(u32) BCM_PAGE_SIZE, (u32) RX_PAGES);
BCE_PRINTF(sc, "rx_bd per page = 0x%08X, usable rx_bd per page = 0x%08X\n",
(u32) TOTAL_RX_BD_PER_PAGE, (u32) USABLE_RX_BD_PER_PAGE);
BCE_PRINTF(sc, "total rx_bd = 0x%08X\n", (u32) TOTAL_RX_BD);
BCE_PRINTF(sc,
"----------------------------"
" rx_bd data "
"----------------------------\n");
/* Now print out the rx_bd's themselves. */
for (int i = 0; i < count; i++) {
rxbd = &sc->rx_bd_chain[RX_PAGE(rx_prod)][RX_IDX(rx_prod)];
bce_dump_rxbd(sc, rx_prod, rxbd);
rx_prod = RX_CHAIN_IDX(NEXT_RX_BD(rx_prod));
}
BCE_PRINTF(sc,
"----------------------------"
"--------------"
"----------------------------\n");
}
/*
* This routine prints the status block.
*/
static void
bce_dump_status_block(struct bce_softc *sc)
{
struct status_block *sblk;
sblk = sc->status_block;
BCE_PRINTF(sc, "----------------------------- Status Block "
"-----------------------------\n");
BCE_PRINTF(sc, "attn_bits = 0x%08X, attn_bits_ack = 0x%08X, index = 0x%04X\n",
sblk->status_attn_bits, sblk->status_attn_bits_ack,
sblk->status_idx);
BCE_PRINTF(sc, "rx_cons0 = 0x%08X, tx_cons0 = 0x%08X\n",
sblk->status_rx_quick_consumer_index0,
sblk->status_tx_quick_consumer_index0);
BCE_PRINTF(sc, "status_idx = 0x%04X\n", sblk->status_idx);
/* Theses indices are not used for normal L2 drivers. */
if (sblk->status_rx_quick_consumer_index1 ||
sblk->status_tx_quick_consumer_index1)
BCE_PRINTF(sc, "rx_cons1 = 0x%08X, tx_cons1 = 0x%08X\n",
sblk->status_rx_quick_consumer_index1,
sblk->status_tx_quick_consumer_index1);
if (sblk->status_rx_quick_consumer_index2 ||
sblk->status_tx_quick_consumer_index2)
BCE_PRINTF(sc, "rx_cons2 = 0x%08X, tx_cons2 = 0x%08X\n",
sblk->status_rx_quick_consumer_index2,
sblk->status_tx_quick_consumer_index2);
if (sblk->status_rx_quick_consumer_index3 ||
sblk->status_tx_quick_consumer_index3)
BCE_PRINTF(sc, "rx_cons3 = 0x%08X, tx_cons3 = 0x%08X\n",
sblk->status_rx_quick_consumer_index3,
sblk->status_tx_quick_consumer_index3);
if (sblk->status_rx_quick_consumer_index4 ||
sblk->status_rx_quick_consumer_index5)
BCE_PRINTF(sc, "rx_cons4 = 0x%08X, rx_cons5 = 0x%08X\n",
sblk->status_rx_quick_consumer_index4,
sblk->status_rx_quick_consumer_index5);
if (sblk->status_rx_quick_consumer_index6 ||
sblk->status_rx_quick_consumer_index7)
BCE_PRINTF(sc, "rx_cons6 = 0x%08X, rx_cons7 = 0x%08X\n",
sblk->status_rx_quick_consumer_index6,
sblk->status_rx_quick_consumer_index7);
if (sblk->status_rx_quick_consumer_index8 ||
sblk->status_rx_quick_consumer_index9)
BCE_PRINTF(sc, "rx_cons8 = 0x%08X, rx_cons9 = 0x%08X\n",
sblk->status_rx_quick_consumer_index8,
sblk->status_rx_quick_consumer_index9);
if (sblk->status_rx_quick_consumer_index10 ||
sblk->status_rx_quick_consumer_index11)
BCE_PRINTF(sc, "rx_cons10 = 0x%08X, rx_cons11 = 0x%08X\n",
sblk->status_rx_quick_consumer_index10,
sblk->status_rx_quick_consumer_index11);
if (sblk->status_rx_quick_consumer_index12 ||
sblk->status_rx_quick_consumer_index13)
BCE_PRINTF(sc, "rx_cons12 = 0x%08X, rx_cons13 = 0x%08X\n",
sblk->status_rx_quick_consumer_index12,
sblk->status_rx_quick_consumer_index13);
if (sblk->status_rx_quick_consumer_index14 ||
sblk->status_rx_quick_consumer_index15)
BCE_PRINTF(sc, "rx_cons14 = 0x%08X, rx_cons15 = 0x%08X\n",
sblk->status_rx_quick_consumer_index14,
sblk->status_rx_quick_consumer_index15);
if (sblk->status_completion_producer_index ||
sblk->status_cmd_consumer_index)
BCE_PRINTF(sc, "com_prod = 0x%08X, cmd_cons = 0x%08X\n",
sblk->status_completion_producer_index,
sblk->status_cmd_consumer_index);
BCE_PRINTF(sc, "-------------------------------------------"
"-----------------------------\n");
}
/*
* This routine prints the statistics block.
*/
static void
bce_dump_stats_block(struct bce_softc *sc)
{
struct statistics_block *sblk;
sblk = sc->stats_block;
BCE_PRINTF(sc, ""
"-----------------------------"
" Stats Block "
"-----------------------------\n");
BCE_PRINTF(sc, "IfHcInOctets = 0x%08X:%08X, "
"IfHcInBadOctets = 0x%08X:%08X\n",
sblk->stat_IfHCInOctets_hi, sblk->stat_IfHCInOctets_lo,
sblk->stat_IfHCInBadOctets_hi, sblk->stat_IfHCInBadOctets_lo);
BCE_PRINTF(sc, "IfHcOutOctets = 0x%08X:%08X, "
"IfHcOutBadOctets = 0x%08X:%08X\n",
sblk->stat_IfHCOutOctets_hi, sblk->stat_IfHCOutOctets_lo,
sblk->stat_IfHCOutBadOctets_hi, sblk->stat_IfHCOutBadOctets_lo);
BCE_PRINTF(sc, "IfHcInUcastPkts = 0x%08X:%08X, "
"IfHcInMulticastPkts = 0x%08X:%08X\n",
sblk->stat_IfHCInUcastPkts_hi, sblk->stat_IfHCInUcastPkts_lo,
sblk->stat_IfHCInMulticastPkts_hi, sblk->stat_IfHCInMulticastPkts_lo);
BCE_PRINTF(sc, "IfHcInBroadcastPkts = 0x%08X:%08X, "
"IfHcOutUcastPkts = 0x%08X:%08X\n",
sblk->stat_IfHCInBroadcastPkts_hi, sblk->stat_IfHCInBroadcastPkts_lo,
sblk->stat_IfHCOutUcastPkts_hi, sblk->stat_IfHCOutUcastPkts_lo);
BCE_PRINTF(sc, "IfHcOutMulticastPkts = 0x%08X:%08X, IfHcOutBroadcastPkts = 0x%08X:%08X\n",
sblk->stat_IfHCOutMulticastPkts_hi, sblk->stat_IfHCOutMulticastPkts_lo,
sblk->stat_IfHCOutBroadcastPkts_hi, sblk->stat_IfHCOutBroadcastPkts_lo);
if (sblk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors)
BCE_PRINTF(sc, "0x%08X : "
"emac_tx_stat_dot3statsinternalmactransmiterrors\n",
sblk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors);
if (sblk->stat_Dot3StatsCarrierSenseErrors)
BCE_PRINTF(sc, "0x%08X : Dot3StatsCarrierSenseErrors\n",
sblk->stat_Dot3StatsCarrierSenseErrors);
if (sblk->stat_Dot3StatsFCSErrors)
BCE_PRINTF(sc, "0x%08X : Dot3StatsFCSErrors\n",
sblk->stat_Dot3StatsFCSErrors);
if (sblk->stat_Dot3StatsAlignmentErrors)
BCE_PRINTF(sc, "0x%08X : Dot3StatsAlignmentErrors\n",
sblk->stat_Dot3StatsAlignmentErrors);
if (sblk->stat_Dot3StatsSingleCollisionFrames)
BCE_PRINTF(sc, "0x%08X : Dot3StatsSingleCollisionFrames\n",
sblk->stat_Dot3StatsSingleCollisionFrames);
if (sblk->stat_Dot3StatsMultipleCollisionFrames)
BCE_PRINTF(sc, "0x%08X : Dot3StatsMultipleCollisionFrames\n",
sblk->stat_Dot3StatsMultipleCollisionFrames);
if (sblk->stat_Dot3StatsDeferredTransmissions)
BCE_PRINTF(sc, "0x%08X : Dot3StatsDeferredTransmissions\n",
sblk->stat_Dot3StatsDeferredTransmissions);
if (sblk->stat_Dot3StatsExcessiveCollisions)
BCE_PRINTF(sc, "0x%08X : Dot3StatsExcessiveCollisions\n",
sblk->stat_Dot3StatsExcessiveCollisions);
if (sblk->stat_Dot3StatsLateCollisions)
BCE_PRINTF(sc, "0x%08X : Dot3StatsLateCollisions\n",
sblk->stat_Dot3StatsLateCollisions);
if (sblk->stat_EtherStatsCollisions)
BCE_PRINTF(sc, "0x%08X : EtherStatsCollisions\n",
sblk->stat_EtherStatsCollisions);
if (sblk->stat_EtherStatsFragments)
BCE_PRINTF(sc, "0x%08X : EtherStatsFragments\n",
sblk->stat_EtherStatsFragments);
if (sblk->stat_EtherStatsJabbers)
BCE_PRINTF(sc, "0x%08X : EtherStatsJabbers\n",
sblk->stat_EtherStatsJabbers);
if (sblk->stat_EtherStatsUndersizePkts)
BCE_PRINTF(sc, "0x%08X : EtherStatsUndersizePkts\n",
sblk->stat_EtherStatsUndersizePkts);
if (sblk->stat_EtherStatsOverrsizePkts)
BCE_PRINTF(sc, "0x%08X : EtherStatsOverrsizePkts\n",
sblk->stat_EtherStatsOverrsizePkts);
if (sblk->stat_EtherStatsPktsRx64Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx64Octets\n",
sblk->stat_EtherStatsPktsRx64Octets);
if (sblk->stat_EtherStatsPktsRx65Octetsto127Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx65Octetsto127Octets\n",
sblk->stat_EtherStatsPktsRx65Octetsto127Octets);
if (sblk->stat_EtherStatsPktsRx128Octetsto255Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx128Octetsto255Octets\n",
sblk->stat_EtherStatsPktsRx128Octetsto255Octets);
if (sblk->stat_EtherStatsPktsRx256Octetsto511Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx256Octetsto511Octets\n",
sblk->stat_EtherStatsPktsRx256Octetsto511Octets);
if (sblk->stat_EtherStatsPktsRx512Octetsto1023Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx512Octetsto1023Octets\n",
sblk->stat_EtherStatsPktsRx512Octetsto1023Octets);
if (sblk->stat_EtherStatsPktsRx1024Octetsto1522Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx1024Octetsto1522Octets\n",
sblk->stat_EtherStatsPktsRx1024Octetsto1522Octets);
if (sblk->stat_EtherStatsPktsRx1523Octetsto9022Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsRx1523Octetsto9022Octets\n",
sblk->stat_EtherStatsPktsRx1523Octetsto9022Octets);
if (sblk->stat_EtherStatsPktsTx64Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx64Octets\n",
sblk->stat_EtherStatsPktsTx64Octets);
if (sblk->stat_EtherStatsPktsTx65Octetsto127Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx65Octetsto127Octets\n",
sblk->stat_EtherStatsPktsTx65Octetsto127Octets);
if (sblk->stat_EtherStatsPktsTx128Octetsto255Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx128Octetsto255Octets\n",
sblk->stat_EtherStatsPktsTx128Octetsto255Octets);
if (sblk->stat_EtherStatsPktsTx256Octetsto511Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx256Octetsto511Octets\n",
sblk->stat_EtherStatsPktsTx256Octetsto511Octets);
if (sblk->stat_EtherStatsPktsTx512Octetsto1023Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx512Octetsto1023Octets\n",
sblk->stat_EtherStatsPktsTx512Octetsto1023Octets);
if (sblk->stat_EtherStatsPktsTx1024Octetsto1522Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx1024Octetsto1522Octets\n",
sblk->stat_EtherStatsPktsTx1024Octetsto1522Octets);
if (sblk->stat_EtherStatsPktsTx1523Octetsto9022Octets)
BCE_PRINTF(sc, "0x%08X : EtherStatsPktsTx1523Octetsto9022Octets\n",
sblk->stat_EtherStatsPktsTx1523Octetsto9022Octets);
if (sblk->stat_XonPauseFramesReceived)
BCE_PRINTF(sc, "0x%08X : XonPauseFramesReceived\n",
sblk->stat_XonPauseFramesReceived);
if (sblk->stat_XoffPauseFramesReceived)
BCE_PRINTF(sc, "0x%08X : XoffPauseFramesReceived\n",
sblk->stat_XoffPauseFramesReceived);
if (sblk->stat_OutXonSent)
BCE_PRINTF(sc, "0x%08X : OutXonSent\n",
sblk->stat_OutXonSent);
if (sblk->stat_OutXoffSent)
BCE_PRINTF(sc, "0x%08X : OutXoffSent\n",
sblk->stat_OutXoffSent);
if (sblk->stat_FlowControlDone)
BCE_PRINTF(sc, "0x%08X : FlowControlDone\n",
sblk->stat_FlowControlDone);
if (sblk->stat_MacControlFramesReceived)
BCE_PRINTF(sc, "0x%08X : MacControlFramesReceived\n",
sblk->stat_MacControlFramesReceived);
if (sblk->stat_XoffStateEntered)
BCE_PRINTF(sc, "0x%08X : XoffStateEntered\n",
sblk->stat_XoffStateEntered);
if (sblk->stat_IfInFramesL2FilterDiscards)
BCE_PRINTF(sc, "0x%08X : IfInFramesL2FilterDiscards\n",
sblk->stat_IfInFramesL2FilterDiscards);
if (sblk->stat_IfInRuleCheckerDiscards)
BCE_PRINTF(sc, "0x%08X : IfInRuleCheckerDiscards\n",
sblk->stat_IfInRuleCheckerDiscards);
if (sblk->stat_IfInFTQDiscards)
BCE_PRINTF(sc, "0x%08X : IfInFTQDiscards\n",
sblk->stat_IfInFTQDiscards);
if (sblk->stat_IfInMBUFDiscards)
BCE_PRINTF(sc, "0x%08X : IfInMBUFDiscards\n",
sblk->stat_IfInMBUFDiscards);
if (sblk->stat_IfInRuleCheckerP4Hit)
BCE_PRINTF(sc, "0x%08X : IfInRuleCheckerP4Hit\n",
sblk->stat_IfInRuleCheckerP4Hit);
if (sblk->stat_CatchupInRuleCheckerDiscards)
BCE_PRINTF(sc, "0x%08X : CatchupInRuleCheckerDiscards\n",
sblk->stat_CatchupInRuleCheckerDiscards);
if (sblk->stat_CatchupInFTQDiscards)
BCE_PRINTF(sc, "0x%08X : CatchupInFTQDiscards\n",
sblk->stat_CatchupInFTQDiscards);
if (sblk->stat_CatchupInMBUFDiscards)
BCE_PRINTF(sc, "0x%08X : CatchupInMBUFDiscards\n",
sblk->stat_CatchupInMBUFDiscards);
if (sblk->stat_CatchupInRuleCheckerP4Hit)
BCE_PRINTF(sc, "0x%08X : CatchupInRuleCheckerP4Hit\n",
sblk->stat_CatchupInRuleCheckerP4Hit);
BCE_PRINTF(sc,
"-----------------------------"
"--------------"
"-----------------------------\n");
}
static void
bce_dump_driver_state(struct bce_softc *sc)
{
u32 val_hi, val_lo;
BCE_PRINTF(sc,
"-----------------------------"
" Driver State "
"-----------------------------\n");
val_hi = BCE_ADDR_HI(sc);
val_lo = BCE_ADDR_LO(sc);
BCE_PRINTF(sc, "0x%08X:%08X - (sc) driver softc structure virtual address\n",
val_hi, val_lo);
val_hi = BCE_ADDR_HI(sc->bce_vhandle);
val_lo = BCE_ADDR_LO(sc->bce_vhandle);
BCE_PRINTF(sc, "0x%08X:%08X - (sc->bce_vhandle) PCI BAR virtual address\n",
val_hi, val_lo);
val_hi = BCE_ADDR_HI(sc->status_block);
val_lo = BCE_ADDR_LO(sc->status_block);
BCE_PRINTF(sc, "0x%08X:%08X - (sc->status_block) status block virtual address\n",
val_hi, val_lo);
val_hi = BCE_ADDR_HI(sc->stats_block);
val_lo = BCE_ADDR_LO(sc->stats_block);
BCE_PRINTF(sc, "0x%08X:%08X - (sc->stats_block) statistics block virtual address\n",
val_hi, val_lo);
val_hi = BCE_ADDR_HI(sc->tx_bd_chain);
val_lo = BCE_ADDR_LO(sc->tx_bd_chain);
BCE_PRINTF(sc,
"0x%08X:%08X - (sc->tx_bd_chain) tx_bd chain virtual adddress\n",
val_hi, val_lo);
val_hi = BCE_ADDR_HI(sc->rx_bd_chain);
val_lo = BCE_ADDR_LO(sc->rx_bd_chain);
BCE_PRINTF(sc,
"0x%08X:%08X - (sc->rx_bd_chain) rx_bd chain virtual address\n",
val_hi, val_lo);
val_hi = BCE_ADDR_HI(sc->tx_mbuf_ptr);
val_lo = BCE_ADDR_LO(sc->tx_mbuf_ptr);
BCE_PRINTF(sc,
"0x%08X:%08X - (sc->tx_mbuf_ptr) tx mbuf chain virtual address\n",
val_hi, val_lo);
val_hi = BCE_ADDR_HI(sc->rx_mbuf_ptr);
val_lo = BCE_ADDR_LO(sc->rx_mbuf_ptr);
BCE_PRINTF(sc,
"0x%08X:%08X - (sc->rx_mbuf_ptr) rx mbuf chain virtual address\n",
val_hi, val_lo);
BCE_PRINTF(sc, " 0x%08X - (sc->interrupts_generated) h/w intrs\n",
sc->interrupts_generated);
BCE_PRINTF(sc, " 0x%08X - (sc->rx_interrupts) rx interrupts handled\n",
sc->rx_interrupts);
BCE_PRINTF(sc, " 0x%08X - (sc->tx_interrupts) tx interrupts handled\n",
sc->tx_interrupts);
BCE_PRINTF(sc, " 0x%08X - (sc->last_status_idx) status block index\n",
sc->last_status_idx);
BCE_PRINTF(sc, " 0x%08X - (sc->tx_prod) tx producer index\n",
sc->tx_prod);
BCE_PRINTF(sc, " 0x%08X - (sc->tx_cons) tx consumer index\n",
sc->tx_cons);
BCE_PRINTF(sc, " 0x%08X - (sc->tx_prod_bseq) tx producer bseq index\n",
sc->tx_prod_bseq);
BCE_PRINTF(sc, " 0x%08X - (sc->rx_prod) rx producer index\n",
sc->rx_prod);
BCE_PRINTF(sc, " 0x%08X - (sc->rx_cons) rx consumer index\n",
sc->rx_cons);
BCE_PRINTF(sc, " 0x%08X - (sc->rx_prod_bseq) rx producer bseq index\n",
sc->rx_prod_bseq);
BCE_PRINTF(sc, " 0x%08X - (sc->rx_mbuf_alloc) rx mbufs allocated\n",
sc->rx_mbuf_alloc);
BCE_PRINTF(sc, " 0x%08X - (sc->free_rx_bd) free rx_bd's\n",
sc->free_rx_bd);
BCE_PRINTF(sc, "0x%08X/%08X - (sc->rx_low_watermark) rx low watermark\n",
sc->rx_low_watermark, (u32) USABLE_RX_BD);
BCE_PRINTF(sc, " 0x%08X - (sc->txmbuf_alloc) tx mbufs allocated\n",
sc->tx_mbuf_alloc);
BCE_PRINTF(sc, " 0x%08X - (sc->rx_mbuf_alloc) rx mbufs allocated\n",
sc->rx_mbuf_alloc);
BCE_PRINTF(sc, " 0x%08X - (sc->used_tx_bd) used tx_bd's\n",
sc->used_tx_bd);
BCE_PRINTF(sc, "0x%08X/%08X - (sc->tx_hi_watermark) tx hi watermark\n",
sc->tx_hi_watermark, (u32) USABLE_TX_BD);
BCE_PRINTF(sc, " 0x%08X - (sc->mbuf_alloc_failed) failed mbuf alloc\n",
sc->mbuf_alloc_failed);
BCE_PRINTF(sc,
"-----------------------------"
"--------------"
"-----------------------------\n");
}
static void
bce_dump_hw_state(struct bce_softc *sc)
{
u32 val1;
BCE_PRINTF(sc,
"----------------------------"
" Hardware State "
"----------------------------\n");
BCE_PRINTF(sc, "0x%08X : bootcode version\n", sc->bce_fw_ver);
val1 = REG_RD(sc, BCE_MISC_ENABLE_STATUS_BITS);
BCE_PRINTF(sc, "0x%08X : (0x%04X) misc_enable_status_bits\n",
val1, BCE_MISC_ENABLE_STATUS_BITS);
val1 = REG_RD(sc, BCE_DMA_STATUS);
BCE_PRINTF(sc, "0x%08X : (0x%04X) dma_status\n", val1, BCE_DMA_STATUS);
val1 = REG_RD(sc, BCE_CTX_STATUS);
BCE_PRINTF(sc, "0x%08X : (0x%04X) ctx_status\n", val1, BCE_CTX_STATUS);
val1 = REG_RD(sc, BCE_EMAC_STATUS);
BCE_PRINTF(sc, "0x%08X : (0x%04X) emac_status\n", val1, BCE_EMAC_STATUS);
val1 = REG_RD(sc, BCE_RPM_STATUS);
BCE_PRINTF(sc, "0x%08X : (0x%04X) rpm_status\n", val1, BCE_RPM_STATUS);
val1 = REG_RD(sc, BCE_TBDR_STATUS);
BCE_PRINTF(sc, "0x%08X : (0x%04X) tbdr_status\n", val1, BCE_TBDR_STATUS);
val1 = REG_RD(sc, BCE_TDMA_STATUS);
BCE_PRINTF(sc, "0x%08X : (0x%04X) tdma_status\n", val1, BCE_TDMA_STATUS);
val1 = REG_RD(sc, BCE_HC_STATUS);
BCE_PRINTF(sc, "0x%08X : (0x%04X) hc_status\n", val1, BCE_HC_STATUS);
BCE_PRINTF(sc,
"----------------------------"
"----------------"
"----------------------------\n");
BCE_PRINTF(sc,
"----------------------------"
" Register Dump "
"----------------------------\n");
for (int i = 0x400; i < 0x8000; i += 0x10)
BCE_PRINTF(sc, "0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
i, REG_RD(sc, i), REG_RD(sc, i + 0x4),
REG_RD(sc, i + 0x8), REG_RD(sc, i + 0xC));
BCE_PRINTF(sc,
"----------------------------"
"----------------"
"----------------------------\n");
}
static void
bce_breakpoint(struct bce_softc *sc)
{
/* Unreachable code to shut the compiler up about unused functions. */
if (0) {
bce_dump_txbd(sc, 0, NULL);
bce_dump_rxbd(sc, 0, NULL);
bce_dump_tx_mbuf_chain(sc, 0, USABLE_TX_BD);
bce_dump_rx_mbuf_chain(sc, 0, USABLE_RX_BD);
bce_dump_l2fhdr(sc, 0, NULL);
bce_dump_tx_chain(sc, 0, USABLE_TX_BD);
bce_dump_rx_chain(sc, 0, USABLE_RX_BD);
bce_dump_status_block(sc);
bce_dump_stats_block(sc);
bce_dump_driver_state(sc);
bce_dump_hw_state(sc);
}
bce_dump_driver_state(sc);
/* Print the important status block fields. */
bce_dump_status_block(sc);
/* Call the debugger. */
breakpoint();
return;
}
#endif
Reference in New Issue Copy Permalink