d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e9fbee49d7
freebsd-skq/sys/vm/memguard.c

406 lines
12 KiB
C
Raw Normal View History

Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
/*
* Copyright (c) 2005,
Well, it seems that I pre-maturely removed the "All rights reserved" statement from some files, so re-add it for the moment, until the related legalese is sorted out. This change affects: sys/kern/kern_mbuf.c sys/vm/memguard.c sys/vm/memguard.h sys/vm/uma.h sys/vm/uma_core.c sys/vm/uma_dbg.c sys/vm/uma_dbg.h sys/vm/uma_int.h
2005-02-16 21:45:59 +00:00
* Bosko Milekic <bmilekic@FreeBSD.org>. All rights reserved.
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* MemGuard is a simple replacement allocator for debugging only
* which provides ElectricFence-style memory barrier protection on
* objects being allocated, and is used to detect tampering-after-free
* scenarios.
*
* See the memguard(9) man page for more information on using MemGuard.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/types.h>
#include <sys/queue.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/malloc.h>
Improve memguard a bit: - Provide tunable vm.memguard.desc, so one can specify memory type without changing the code and recompiling the kernel. - Allow to use memguard for kernel modules by providing sysctl vm.memguard.desc, which can be changed to short description of memory type before module is loaded. - Move as much memguard code as possible to memguard.c. - Add sysctl node vm.memguard. and move memguard-specific sysctl there. - Add malloc_desc2type() function for finding memory type based on its short description (ks_shortdesc field). - Memory type can be changed (via vm.memguard.desc sysctl) only if it doesn't exist (will be loaded later) or when no memory is allocated yet. If there is allocated memory for the given memory type, return EBUSY. - Implement two ways of memory types comparsion and make safer/slower the default.
2005-12-30 11:45:07 +00:00
#include <sys/sysctl.h>
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
#include <vm/vm.h>
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
#include <vm/vm_param.h>
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
#include <vm/vm_page.h>
#include <vm/vm_map.h>
#include <vm/vm_extern.h>
#include <vm/memguard.h>
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
/*
* The maximum number of pages allowed per allocation. If you're using
* MemGuard to override very large items (> MAX_PAGES_PER_ITEM in size),
* you need to increase MAX_PAGES_PER_ITEM.
*/
#define MAX_PAGES_PER_ITEM 64
Improve memguard a bit: - Provide tunable vm.memguard.desc, so one can specify memory type without changing the code and recompiling the kernel. - Allow to use memguard for kernel modules by providing sysctl vm.memguard.desc, which can be changed to short description of memory type before module is loaded. - Move as much memguard code as possible to memguard.c. - Add sysctl node vm.memguard. and move memguard-specific sysctl there. - Add malloc_desc2type() function for finding memory type based on its short description (ks_shortdesc field). - Memory type can be changed (via vm.memguard.desc sysctl) only if it doesn't exist (will be loaded later) or when no memory is allocated yet. If there is allocated memory for the given memory type, return EBUSY. - Implement two ways of memory types comparsion and make safer/slower the default.
2005-12-30 11:45:07 +00:00
SYSCTL_NODE(_vm, OID_AUTO, memguard, CTLFLAG_RW, NULL, "MemGuard data");
/*
* The vm_memguard_divisor variable controls how much of kmem_map should be
* reserved for MemGuard.
*/
u_int vm_memguard_divisor;
SYSCTL_UINT(_vm_memguard, OID_AUTO, divisor, CTLFLAG_RD, &vm_memguard_divisor,
0, "(kmem_size/memguard_divisor) == memguard submap size");
/*
* Short description (ks_shortdesc) of memory type to monitor.
*/
static char vm_memguard_desc[128] = "";
static struct malloc_type *vm_memguard_mtype = NULL;
TUNABLE_STR("vm.memguard.desc", vm_memguard_desc, sizeof(vm_memguard_desc));
static int
memguard_sysctl_desc(SYSCTL_HANDLER_ARGS)
{
struct malloc_type_internal *mtip;
struct malloc_type_stats *mtsp;
struct malloc_type *mtp;
char desc[128];
long bytes;
int error, i;
strlcpy(desc, vm_memguard_desc, sizeof(desc));
error = sysctl_handle_string(oidp, desc, sizeof(desc), req);
if (error != 0 || req->newptr == NULL)
return (error);
/*
* We can change memory type when no memory has been allocated for it
* or when there is no such memory type yet (ie. it will be loaded with
* kernel module).
*/
bytes = 0;
mtx_lock(&malloc_mtx);
mtp = malloc_desc2type(desc);
if (mtp != NULL) {
mtip = mtp->ks_handle;
for (i = 0; i < MAXCPU; i++) {
mtsp = &mtip->mti_stats[i];
bytes += mtsp->mts_memalloced;
bytes -= mtsp->mts_memfreed;
}
}
if (bytes > 0)
error = EBUSY;
else {
/*
* If mtp is NULL, it will be initialized in memguard_cmp().
*/
vm_memguard_mtype = mtp;
strlcpy(vm_memguard_desc, desc, sizeof(vm_memguard_desc));
}
mtx_unlock(&malloc_mtx);
return (error);
}
SYSCTL_PROC(_vm_memguard, OID_AUTO, desc, CTLTYPE_STRING | CTLFLAG_RW, 0, 0,
memguard_sysctl_desc, "A", "Short description of memory type to monitor");
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
/*
* Global MemGuard data.
*/
static vm_map_t memguard_map;
static unsigned long memguard_mapsize;
static unsigned long memguard_mapused;
struct memguard_entry {
STAILQ_ENTRY(memguard_entry) entries;
void *ptr;
};
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
static struct memguard_fifo {
struct memguard_entry *stqh_first;
struct memguard_entry **stqh_last;
int index;
} memguard_fifo_pool[MAX_PAGES_PER_ITEM];
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
/*
* Local prototypes.
*/
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
static void memguard_guard(void *addr, int numpgs);
static void memguard_unguard(void *addr, int numpgs);
static struct memguard_fifo *vtomgfifo(vm_offset_t va);
static void vsetmgfifo(vm_offset_t va, struct memguard_fifo *mgfifo);
static void vclrmgfifo(vm_offset_t va);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
/*
* Local macros. MemGuard data is global, so replace these with whatever
* your system uses to protect global data (if it is kernel-level
* parallelized). This is for porting among BSDs.
*/
#define MEMGUARD_CRIT_SECTION_DECLARE static struct mtx memguard_mtx
#define MEMGUARD_CRIT_SECTION_INIT \
mtx_init(&memguard_mtx, "MemGuard mtx", NULL, MTX_DEF)
#define MEMGUARD_CRIT_SECTION_ENTER mtx_lock(&memguard_mtx)
#define MEMGUARD_CRIT_SECTION_EXIT mtx_unlock(&memguard_mtx)
MEMGUARD_CRIT_SECTION_DECLARE;
/*
* Initialize the MemGuard mock allocator. All objects from MemGuard come
* out of a single VM map (contiguous chunk of address space).
*/
void
memguard_init(vm_map_t parent_map, unsigned long size)
{
char *base, *limit;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
int i;
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
/* size must be multiple of PAGE_SIZE */
size /= PAGE_SIZE;
size++;
size *= PAGE_SIZE;
memguard_map = kmem_suballoc(parent_map, (vm_offset_t *)&base,
Provide the new argument to kmem_suballoc().
2008-05-10 23:39:27 +00:00
(vm_offset_t *)&limit, (vm_size_t)size, FALSE);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
memguard_map->system_map = 1;
memguard_mapsize = size;
memguard_mapused = 0;
MEMGUARD_CRIT_SECTION_INIT;
MEMGUARD_CRIT_SECTION_ENTER;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
for (i = 0; i < MAX_PAGES_PER_ITEM; i++) {
STAILQ_INIT(&memguard_fifo_pool[i]);
memguard_fifo_pool[i].index = i;
}
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
MEMGUARD_CRIT_SECTION_EXIT;
printf("MEMGUARD DEBUGGING ALLOCATOR INITIALIZED:\n");
printf("\tMEMGUARD map base: %p\n", base);
printf("\tMEMGUARD map limit: %p\n", limit);
printf("\tMEMGUARD map size: %ld (Bytes)\n", size);
}
/*
* Allocate a single object of specified size with specified flags (either
* M_WAITOK or M_NOWAIT).
*/
void *
memguard_alloc(unsigned long size, int flags)
{
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
void *obj;
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
struct memguard_entry *e = NULL;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
int numpgs;
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
numpgs = size / PAGE_SIZE;
if ((size % PAGE_SIZE) != 0)
numpgs++;
if (numpgs > MAX_PAGES_PER_ITEM)
panic("MEMGUARD: You must increase MAX_PAGES_PER_ITEM " \
"in memguard.c (requested: %d pages)", numpgs);
if (numpgs == 0)
return NULL;
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
/*
* If we haven't exhausted the memguard_map yet, allocate from
* it and grab a new page, even if we have recycled pages in our
* FIFO. This is because we wish to allow recycled pages to live
* guarded in the FIFO for as long as possible in order to catch
* even very late tamper-after-frees, even though it means that
* we end up wasting more memory, this is only a DEBUGGING allocator
* after all.
*/
MEMGUARD_CRIT_SECTION_ENTER;
if (memguard_mapused >= memguard_mapsize) {
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
e = STAILQ_FIRST(&memguard_fifo_pool[numpgs - 1]);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
if (e != NULL) {
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
STAILQ_REMOVE(&memguard_fifo_pool[numpgs - 1], e,
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
memguard_entry, entries);
MEMGUARD_CRIT_SECTION_EXIT;
obj = e->ptr;
free(e, M_TEMP);
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
memguard_unguard(obj, numpgs);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
if (flags & M_ZERO)
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
bzero(obj, PAGE_SIZE * numpgs);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
return obj;
}
MEMGUARD_CRIT_SECTION_EXIT;
if (flags & M_WAITOK)
panic("MEMGUARD: Failed with M_WAITOK: " \
"memguard_map too small");
return NULL;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
}
memguard_mapused += (PAGE_SIZE * numpgs);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
MEMGUARD_CRIT_SECTION_EXIT;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
obj = (void *)kmem_malloc(memguard_map, PAGE_SIZE * numpgs, flags);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
if (obj != NULL) {
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
vsetmgfifo((vm_offset_t)obj, &memguard_fifo_pool[numpgs - 1]);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
if (flags & M_ZERO)
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
bzero(obj, PAGE_SIZE * numpgs);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
} else {
MEMGUARD_CRIT_SECTION_ENTER;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
memguard_mapused -= (PAGE_SIZE * numpgs);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
MEMGUARD_CRIT_SECTION_EXIT;
}
return obj;
}
/*
* Free specified single object.
*/
void
memguard_free(void *addr)
{
struct memguard_entry *e;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
struct memguard_fifo *mgfifo;
int idx;
int *temp;
addr = (void *)trunc_page((unsigned long)addr);
/*
* Page should not be guarded by now, so force a write.
* The purpose of this is to increase the likelihood of catching a
* double-free, but not necessarily a tamper-after-free (the second
* thread freeing might not write before freeing, so this forces it
* to and, subsequently, trigger a fault).
*/
temp = (int *)((unsigned long)addr + (PAGE_SIZE/2)); /* in page */
*temp = 0xd34dc0d3;
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
mgfifo = vtomgfifo((vm_offset_t)addr);
idx = mgfifo->index;
memguard_guard(addr, idx + 1);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
e = malloc(sizeof(struct memguard_entry), M_TEMP, M_NOWAIT);
if (e == NULL) {
MEMGUARD_CRIT_SECTION_ENTER;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
memguard_mapused -= (PAGE_SIZE * (idx + 1));
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
MEMGUARD_CRIT_SECTION_EXIT;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
memguard_unguard(addr, idx + 1); /* just in case */
vclrmgfifo((vm_offset_t)addr);
kmem_free(memguard_map, (vm_offset_t)addr,
PAGE_SIZE * (idx + 1));
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
return;
}
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
e->ptr = addr;
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
MEMGUARD_CRIT_SECTION_ENTER;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
STAILQ_INSERT_TAIL(mgfifo, e, entries);
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
MEMGUARD_CRIT_SECTION_EXIT;
}
Improve memguard a bit: - Provide tunable vm.memguard.desc, so one can specify memory type without changing the code and recompiling the kernel. - Allow to use memguard for kernel modules by providing sysctl vm.memguard.desc, which can be changed to short description of memory type before module is loaded. - Move as much memguard code as possible to memguard.c. - Add sysctl node vm.memguard. and move memguard-specific sysctl there. - Add malloc_desc2type() function for finding memory type based on its short description (ks_shortdesc field). - Memory type can be changed (via vm.memguard.desc sysctl) only if it doesn't exist (will be loaded later) or when no memory is allocated yet. If there is allocated memory for the given memory type, return EBUSY. - Implement two ways of memory types comparsion and make safer/slower the default.
2005-12-30 11:45:07 +00:00
int
memguard_cmp(struct malloc_type *mtp)
{
#if 1
/*
* The safest way of comparsion is to always compare short description
* string of memory type, but it is also the slowest way.
*/
return (strcmp(mtp->ks_shortdesc, vm_memguard_desc) == 0);
#else
/*
* If we compare pointers, there are two possible problems:
* 1. Memory type was unloaded and new memory type was allocated at the
* same address.
* 2. Memory type was unloaded and loaded again, but allocated at a
* different address.
*/
if (vm_memguard_mtype != NULL)
return (mtp == vm_memguard_mtype);
if (strcmp(mtp->ks_shortdesc, vm_memguard_desc) == 0) {
vm_memguard_mtype = mtp;
return (1);
}
return (0);
#endif
}
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
/*
* Guard a page containing specified object (make it read-only so that
* future writes to it fail).
*/
static void
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
memguard_guard(void *addr, int numpgs)
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
{
s/round_page/trunc_page/g I meant trunc_page. It's only a coincidence this hasn't caused problems yet. Pointed out by: Antoine Brodin <antoine.brodin@laposte.net>
2005-01-22 00:09:34 +00:00
void *a = (void *)trunc_page((unsigned long)addr);
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
if (vm_map_protect(memguard_map, (vm_offset_t)a,
(vm_offset_t)((unsigned long)a + (PAGE_SIZE * numpgs)),
VM_PROT_READ, FALSE) != KERN_SUCCESS)
panic("MEMGUARD: Unable to guard page!");
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
}
/*
* Unguard a page containing specified object (make it read-and-write to
* allow full data access).
*/
static void
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
memguard_unguard(void *addr, int numpgs)
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
{
s/round_page/trunc_page/g I meant trunc_page. It's only a coincidence this hasn't caused problems yet. Pointed out by: Antoine Brodin <antoine.brodin@laposte.net>
2005-01-22 00:09:34 +00:00
void *a = (void *)trunc_page((unsigned long)addr);
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
if (vm_map_protect(memguard_map, (vm_offset_t)a,
(vm_offset_t)((unsigned long)a + (PAGE_SIZE * numpgs)),
VM_PROT_DEFAULT, FALSE) != KERN_SUCCESS)
panic("MEMGUARD: Unable to unguard page!");
}
/*
* vtomgfifo() converts a virtual address of the first page allocated for
* an item to a memguard_fifo_pool reference for the corresponding item's
* size.
*
* vsetmgfifo() sets a reference in an underlying page for the specified
* virtual address to an appropriate memguard_fifo_pool.
*
Rather than overloading the page->object field like UMA does, use instead an unused pageq queue reference in the page structure to stash a pointer to the MemGuard FIFO. Using the page->object field caused problems because when vm_map_protect() was called the second time to set VM_PROT_DEFAULT back onto a set of pages in memguard_map, the protection in the VM would be changed but the PMAP code would lazily not restore the PG_RW bit on the underlying pages right away (see pmap_protect()). So when a page fault finally occured and the VM noticed the faulting address corresponds to a page that _does_ have write access now, it would then call into PMAP to set back PG_RW (i386 case being discussed here). However, before it got to do that, an assertion on the object lock not being owned would get triggered, as the object of the faulting page would need to be locked but was overloaded by MemGuard. This is precisely why MemGuard cannot overload page->object. Submitted by: Alan Cox (alc@)
2005-02-15 22:17:07 +00:00
* These routines are very similar to those defined by UMA in uma_int.h.
* The difference is that these routines store the mgfifo in one of the
* page's fields that is unused when the page is wired rather than the
* object field, which is used.
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
*/
static struct memguard_fifo *
vtomgfifo(vm_offset_t va)
{
vm_page_t p;
struct memguard_fifo *mgfifo;
p = PHYS_TO_VM_PAGE(pmap_kextract(va));
Rather than overloading the page->object field like UMA does, use instead an unused pageq queue reference in the page structure to stash a pointer to the MemGuard FIFO. Using the page->object field caused problems because when vm_map_protect() was called the second time to set VM_PROT_DEFAULT back onto a set of pages in memguard_map, the protection in the VM would be changed but the PMAP code would lazily not restore the PG_RW bit on the underlying pages right away (see pmap_protect()). So when a page fault finally occured and the VM noticed the faulting address corresponds to a page that _does_ have write access now, it would then call into PMAP to set back PG_RW (i386 case being discussed here). However, before it got to do that, an assertion on the object lock not being owned would get triggered, as the object of the faulting page would need to be locked but was overloaded by MemGuard. This is precisely why MemGuard cannot overload page->object. Submitted by: Alan Cox (alc@)
2005-02-15 22:17:07 +00:00
KASSERT(p->wire_count != 0 && p->queue == PQ_NONE,
("MEMGUARD: Expected wired page in vtomgfifo!"));
mgfifo = (struct memguard_fifo *)p->pageq.tqe_next;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
return mgfifo;
}
static void
vsetmgfifo(vm_offset_t va, struct memguard_fifo *mgfifo)
{
vm_page_t p;
p = PHYS_TO_VM_PAGE(pmap_kextract(va));
Rather than overloading the page->object field like UMA does, use instead an unused pageq queue reference in the page structure to stash a pointer to the MemGuard FIFO. Using the page->object field caused problems because when vm_map_protect() was called the second time to set VM_PROT_DEFAULT back onto a set of pages in memguard_map, the protection in the VM would be changed but the PMAP code would lazily not restore the PG_RW bit on the underlying pages right away (see pmap_protect()). So when a page fault finally occured and the VM noticed the faulting address corresponds to a page that _does_ have write access now, it would then call into PMAP to set back PG_RW (i386 case being discussed here). However, before it got to do that, an assertion on the object lock not being owned would get triggered, as the object of the faulting page would need to be locked but was overloaded by MemGuard. This is precisely why MemGuard cannot overload page->object. Submitted by: Alan Cox (alc@)
2005-02-15 22:17:07 +00:00
KASSERT(p->wire_count != 0 && p->queue == PQ_NONE,
("MEMGUARD: Expected wired page in vsetmgfifo!"));
p->pageq.tqe_next = (vm_page_t)mgfifo;
Implement support for buffers larger than PAGE_SIZE in MemGuard. Adds a little bit of complexity but performance requirements lacking (this is a debugging allocator after all), it's really not too bad (still only 317 lines). Also add an additional check to help catch really weird 3-threads-involved races: make memguard_free() write to the first page handed back, always, before it does anything else. Note that there is still a problem in VM+PMAP (specifically with vm_map_protect) w.r.t. MemGuard uses it, but this will be fixed shortly and this change stands on its own.
2005-02-10 22:36:05 +00:00
}
static void vclrmgfifo(vm_offset_t va)
{
vm_page_t p;
p = PHYS_TO_VM_PAGE(pmap_kextract(va));
Rather than overloading the page->object field like UMA does, use instead an unused pageq queue reference in the page structure to stash a pointer to the MemGuard FIFO. Using the page->object field caused problems because when vm_map_protect() was called the second time to set VM_PROT_DEFAULT back onto a set of pages in memguard_map, the protection in the VM would be changed but the PMAP code would lazily not restore the PG_RW bit on the underlying pages right away (see pmap_protect()). So when a page fault finally occured and the VM noticed the faulting address corresponds to a page that _does_ have write access now, it would then call into PMAP to set back PG_RW (i386 case being discussed here). However, before it got to do that, an assertion on the object lock not being owned would get triggered, as the object of the faulting page would need to be locked but was overloaded by MemGuard. This is precisely why MemGuard cannot overload page->object. Submitted by: Alan Cox (alc@)
2005-02-15 22:17:07 +00:00
KASSERT(p->wire_count != 0 && p->queue == PQ_NONE,
("MEMGUARD: Expected wired page in vclrmgfifo!"));
p->pageq.tqe_next = NULL;
Bring in MemGuard, a very simple and small replacement allocator designed to help detect tamper-after-free scenarios, a problem more and more common and likely with multithreaded kernels where race conditions are more prevalent. Currently MemGuard can only take over malloc()/realloc()/free() for particular (a) malloc type(s) and the code brought in with this change manually instruments it to take over M_SUBPROC allocations as an example. If you are planning to use it, for now you must: 1) Put "options DEBUG_MEMGUARD" in your kernel config. 2) Edit src/sys/kern/kern_malloc.c manually, look for "XXX CHANGEME" and replace the M_SUBPROC comparison with the appropriate malloc type (this might require additional but small/simple code modification if, say, the malloc type is declared out of scope). 3) Build and install your kernel. Tune vm.memguard_divisor boot-time tunable which is used to scale how much of kmem_map you want to allott for MemGuard's use. The default is 10, so kmem_size/10. ToDo: 1) Bring in a memguard(9) man page. 2) Better instrumentation (e.g., boot-time) of MemGuard taking over malloc types. 3) Teach UMA about MemGuard to allow MemGuard to override zone allocations too. 4) Improve MemGuard if necessary. This work is partly based on some old patches from Ian Dowse.
2005-01-21 18:09:17 +00:00
}
Reference in New Issue Copy Permalink