d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ed3301cfd4
freebsd-skq/sys/dev/mk48txx/mk48txx.c

327 lines
9.2 KiB
C
Raw Normal View History

Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
* from: NetBSD: mk48txx.c,v 1.15 2004/07/05 09:24:31 pk Exp
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
*/
Use __FBSDID(). Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
/*
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
* Mostek MK48T02, MK48T08, MK48T18, MK48T59 time-of-day chip subroutines.
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/clock.h>
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
#include <sys/eventhandler.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/watchdog.h>
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
#include <machine/bus.h>
s#<mk48txx/mk48txxreg.h>#<dev/mk48txx/mk48txxreg.h>#
2003-08-23 05:56:58 +00:00
#include <dev/mk48txx/mk48txxreg.h>
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
#include <dev/mk48txx/mk48txxvar.h>
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
#include "clock_if.h"
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
static uint8_t mk48txx_def_nvrd(device_t, int);
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
static void mk48txx_def_nvwr(device_t, int, uint8_t);
static void mk48txx_watchdog(void *, u_int, int *);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
struct {
const char *name;
bus_size_t nvramsz;
bus_size_t clkoff;
int flags;
#define MK48TXX_EXT_REGISTERS 1 /* Has extended register set */
} mk48txx_models[] = {
{ "mk48t02", MK48T02_CLKSZ, MK48T02_CLKOFF, 0 },
{ "mk48t08", MK48T08_CLKSZ, MK48T08_CLKOFF, 0 },
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
{ "mk48t18", MK48T18_CLKSZ, MK48T18_CLKOFF, 0 },
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
{ "mk48t59", MK48T59_CLKSZ, MK48T59_CLKOFF, MK48TXX_EXT_REGISTERS },
};
int
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
mk48txx_attach(device_t dev)
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
{
struct mk48txx_softc *sc;
int i;
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
uint8_t wday;
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
sc = device_get_softc(dev);
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
if (mtx_initialized(&sc->sc_mtx) == 0) {
device_printf(dev, "%s: mutex not initialized\n", __func__);
return (ENXIO);
}
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
device_printf(dev, "model %s", sc->sc_model);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
i = sizeof(mk48txx_models) / sizeof(mk48txx_models[0]);
while (--i >= 0) {
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
if (strcmp(sc->sc_model, mk48txx_models[i].name) == 0) {
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
break;
}
}
if (i < 0) {
device_printf(dev, " (unsupported)\n");
return (ENXIO);
}
printf("\n");
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
sc->sc_nvramsz = mk48txx_models[i].nvramsz;
sc->sc_clkoffset = mk48txx_models[i].clkoff;
if (sc->sc_nvrd == NULL)
sc->sc_nvrd = mk48txx_def_nvrd;
if (sc->sc_nvwr == NULL)
sc->sc_nvwr = mk48txx_def_nvwr;
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
if (mk48txx_models[i].flags & MK48TXX_EXT_REGISTERS) {
mtx_lock(&sc->sc_mtx);
if ((*sc->sc_nvrd)(dev, sc->sc_clkoffset + MK48TXX_FLAGS) &
MK48TXX_FLAGS_BL) {
mtx_unlock(&sc->sc_mtx);
device_printf(dev, "%s: battery low\n", __func__);
return (ENXIO);
}
mtx_unlock(&sc->sc_mtx);
}
if (sc->sc_flag & MK48TXX_NO_CENT_ADJUST) {
/*
* Use MK48TXX_WDAY_CB instead of manually adjusting the
* century.
*/
if (!(mk48txx_models[i].flags & MK48TXX_EXT_REGISTERS)) {
device_printf(dev, "%s: no century bit\n", __func__);
return (ENXIO);
} else {
mtx_lock(&sc->sc_mtx);
wday = (*sc->sc_nvrd)
(dev, sc->sc_clkoffset + MK48TXX_IWDAY);
wday |= MK48TXX_WDAY_CEB;
(*sc->sc_nvwr)
(dev, sc->sc_clkoffset + MK48TXX_IWDAY, wday);
mtx_unlock(&sc->sc_mtx);
}
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
}
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
clock_register(dev, 1000000); /* 1 second resolution. */
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
if ((sc->sc_flag & MK48TXX_WDOG_REGISTER) &&
(mk48txx_models[i].flags & MK48TXX_EXT_REGISTERS)) {
sc->sc_wet = EVENTHANDLER_REGISTER(watchdog_list,
mk48txx_watchdog, dev, 0);
device_printf(dev,
Fix spelling in a status message. MFC after: 1 day
2006-09-01 20:14:06 +00:00
"watchdog registered, timeout interval max. 128 sec\n");
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
}
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
return (0);
}
/*
* Get time-of-day and convert to a `struct timespec'
* Return 0 on success; an error number otherwise.
*/
int
mk48txx_gettime(device_t dev, struct timespec *ts)
{
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
struct mk48txx_softc *sc;
bus_size_t clkoff;
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
struct clocktime ct;
int year;
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
uint8_t csr;
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
sc = device_get_softc(dev);
clkoff = sc->sc_clkoffset;
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
mtx_lock(&sc->sc_mtx);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
/* enable read (stop time) */
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
csr = (*sc->sc_nvrd)(dev, clkoff + MK48TXX_ICSR);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
csr |= MK48TXX_CSR_READ;
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
(*sc->sc_nvwr)(dev, clkoff + MK48TXX_ICSR, csr);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
#define FROMREG(reg, mask) ((*sc->sc_nvrd)(dev, clkoff + (reg)) & (mask))
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
ct.nsec = 0;
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
ct.sec = FROMBCD(FROMREG(MK48TXX_ISEC, MK48TXX_SEC_MASK));
ct.min = FROMBCD(FROMREG(MK48TXX_IMIN, MK48TXX_MIN_MASK));
ct.hour = FROMBCD(FROMREG(MK48TXX_IHOUR, MK48TXX_HOUR_MASK));
ct.day = FROMBCD(FROMREG(MK48TXX_IDAY, MK48TXX_DAY_MASK));
/* Map dow from 1 - 7 to 0 - 6; FROMBCD() isn't necessary here. */
ct.dow = FROMREG(MK48TXX_IWDAY, MK48TXX_WDAY_MASK) - 1;
ct.mon = FROMBCD(FROMREG(MK48TXX_IMON, MK48TXX_MON_MASK));
year = FROMBCD(FROMREG(MK48TXX_IYEAR, MK48TXX_YEAR_MASK));
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
year += sc->sc_year0;
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
if (sc->sc_flag & MK48TXX_NO_CENT_ADJUST)
year += (FROMREG(MK48TXX_IWDAY, MK48TXX_WDAY_CB) >>
MK48TXX_WDAY_CB_SHIFT) * 100;
else if (year < POSIX_BASE_YEAR)
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
year += 100;
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
#undef FROMREG
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
ct.year = year;
/* time wears on */
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
csr = (*sc->sc_nvrd)(dev, clkoff + MK48TXX_ICSR);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
csr &= ~MK48TXX_CSR_READ;
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
(*sc->sc_nvwr)(dev, clkoff + MK48TXX_ICSR, csr);
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
mtx_unlock(&sc->sc_mtx);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
return (clock_ct_to_ts(&ct, ts));
}
/*
* Set the time-of-day clock based on the value of the `struct timespec' arg.
* Return 0 on success; an error number otherwise.
*/
int
mk48txx_settime(device_t dev, struct timespec *ts)
{
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
struct mk48txx_softc *sc;
bus_size_t clkoff;
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
struct clocktime ct;
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
uint8_t csr;
int cent, year;
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
sc = device_get_softc(dev);
clkoff = sc->sc_clkoffset;
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
/* Accuracy is only one second. */
if (ts->tv_nsec >= 500000000)
ts->tv_sec++;
ts->tv_nsec = 0;
clock_ts_to_ct(ts, &ct);
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
mtx_lock(&sc->sc_mtx);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
/* enable write */
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
csr = (*sc->sc_nvrd)(dev, clkoff + MK48TXX_ICSR);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
csr |= MK48TXX_CSR_WRITE;
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
(*sc->sc_nvwr)(dev, clkoff + MK48TXX_ICSR, csr);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
#define TOREG(reg, mask, val) \
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
((*sc->sc_nvwr)(dev, clkoff + (reg), \
((*sc->sc_nvrd)(dev, clkoff + (reg)) & ~(mask)) | \
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
((val) & (mask))))
TOREG(MK48TXX_ISEC, MK48TXX_SEC_MASK, TOBCD(ct.sec));
TOREG(MK48TXX_IMIN, MK48TXX_MIN_MASK, TOBCD(ct.min));
TOREG(MK48TXX_IHOUR, MK48TXX_HOUR_MASK, TOBCD(ct.hour));
/* Map dow from 0 - 6 to 1 - 7; TOBCD() isn't necessary here. */
TOREG(MK48TXX_IWDAY, MK48TXX_WDAY_MASK, ct.dow + 1);
TOREG(MK48TXX_IDAY, MK48TXX_DAY_MASK, TOBCD(ct.day));
TOREG(MK48TXX_IMON, MK48TXX_MON_MASK, TOBCD(ct.mon));
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
year = ct.year - sc->sc_year0;
if (sc->sc_flag & MK48TXX_NO_CENT_ADJUST) {
cent = year / 100;
TOREG(MK48TXX_IWDAY, MK48TXX_WDAY_CB,
cent << MK48TXX_WDAY_CB_SHIFT);
year -= cent * 100;
} else if (year > 99)
year -= 100;
TOREG(MK48TXX_IYEAR, MK48TXX_YEAR_MASK, TOBCD(year));
- Some of the upper bits of the time related (seconds, minutes, etc.) registers are control bits or depending on the model contain additional time bits with a different meaning than the lower ones. In order to only read the desired time bits and not change the upper bits on write use appropriate masks in the gettime and settime function respectively. Due to the polarity of the stop oscillator bit and the fact that the century bits aren't used on sparc64 not masking them didn't cause problems so far. - Fix two off-by-one errors in the handling of the day of week. The genclock code represents the dow as 0 - 6 with 0 being Sunday but the mk48txx use 1 - 7 with 1 being Sunday. In the settime function when writing the dow to the clock the range wasn't adjusted accordingly but the clock apparently played along nicely otherwise the second bug in the gettime function which mapped 1 - 7 to 0 - 6 but with 0 meaning Saturday would have been triggered. Fixing these makes the date being stored in the same format Sun/Solaris uses and cures the "Invalid time in real time clock. Check and reset the date immediately!" when the date was set under Solaris prior to booting FreeBSD/sparc64. [1] Looking at other clock drivers/code e.g. FreeBSD/alpha the former "bug", i.e. storing the dow as 0 - 6 even when the clock uses 1 - 7, seems to be common but might be on purpose for compatibility when multi-booting with other OS which do the same. So it might make sense to add a flag to handle the dow off-by-one for use of this driver on platforms other than sparc64. - Check the state of the battery on mk48txx that support this in the attach function. - Add a note that use of the century bit should be implemented but isn't required at the moment because it isn't used on sparc64. Problem noted by: joerg [1] MT5 candidate.
2004-09-19 21:38:11 +00:00
#undef TOREG
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
/* load them up */
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
csr = (*sc->sc_nvrd)(dev, clkoff + MK48TXX_ICSR);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
csr &= ~MK48TXX_CSR_WRITE;
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
(*sc->sc_nvwr)(dev, clkoff + MK48TXX_ICSR, csr);
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
mtx_unlock(&sc->sc_mtx);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
return (0);
}
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
static uint8_t
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
mk48txx_def_nvrd(device_t dev, int off)
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
{
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
struct mk48txx_softc *sc;
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
sc = device_get_softc(dev);
return (bus_space_read_1(sc->sc_bst, sc->sc_bsh, off));
}
static void
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
mk48txx_def_nvwr(device_t dev, int off, uint8_t v)
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
{
struct mk48txx_softc *sc;
sc = device_get_softc(dev);
bus_space_write_1(sc->sc_bst, sc->sc_bsh, off, v);
Add a driver back end for the Mostek MK48T02, MK48T08 and MK48T59 time-of-day clocks, ported from NetBSD. The front-ends are expected to be at least partly machine-dependent; the sparc64 EBus and SBus ones will be commited to MD directories for now (in a subsequent commit).
2002-04-04 23:44:42 +00:00
}
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
static void
mk48txx_watchdog(void *arg, u_int cmd, int *error)
{
device_t dev;
struct mk48txx_softc *sc;
uint8_t t, wdog;
dev = arg;
sc = device_get_softc(dev);
t = cmd & WD_INTERVAL;
Revisit the watchdogs: Resetting the error to EINVAL after failing to set the watchdog might hide the succesful arming of an earlier one. Accept that on failing to arm any watchdog (because of non-supported timeouts) EOPNOTSUPP is returned instead of the more appropriate EINVAL. MFC after: 3 days
2007-03-27 21:03:37 +00:00
if (t >= 26 && t <= 37) {
wdog = 0;
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
if (t <= WD_TO_2SEC) {
wdog |= MK48TXX_WDOG_RB_1_16;
t -= 26;
} else if (t <= WD_TO_8SEC) {
wdog |= MK48TXX_WDOG_RB_1_4;
t -= WD_TO_250MS;
} else if (t <= WD_TO_32SEC) {
wdog |= MK48TXX_WDOG_RB_1;
t -= WD_TO_1SEC;
} else {
wdog |= MK48TXX_WDOG_RB_4;
t -= WD_TO_4SEC;
}
wdog |= (min(1 << t,
MK48TXX_WDOG_BMB_MASK >> MK48TXX_WDOG_BMB_SHIFT)) <<
MK48TXX_WDOG_BMB_SHIFT;
if (sc->sc_flag & MK48TXX_WDOG_ENABLE_WDS)
wdog |= MK48TXX_WDOG_WDS;
*error = 0;
Revisit the watchdogs: Resetting the error to EINVAL after failing to set the watchdog might hide the succesful arming of an earlier one. Accept that on failing to arm any watchdog (because of non-supported timeouts) EOPNOTSUPP is returned instead of the more appropriate EINVAL. MFC after: 3 days
2007-03-27 21:03:37 +00:00
} else {
wdog = 0;
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 21:16:50 +00:00
}
mtx_lock(&sc->sc_mtx);
(*sc->sc_nvwr)(dev, sc->sc_clkoffset + MK48TXX_WDOG, wdog);
mtx_unlock(&sc->sc_mtx);
}
Reference in New Issue Copy Permalink