d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f11825148f
freebsd-skq/sys/netinet/sctp_asconf.c

2780 lines
81 KiB
C
Raw Normal View History

Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*-
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
* Copyright (c) 2001-2007, Cisco Systems, Inc. All rights reserved.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $KAME: sctp_asconf.c,v 1.24 2005/03/06 16:04:16 itojun Exp $ */
#include <sys/cdefs.h>
Somehow I missed this one. The sys/cdef.h was out of order with respect to the FSBID..
2006-11-03 19:48:56 +00:00
__FBSDID("$FreeBSD$");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_os.h>
#include <netinet/sctp_var.h>
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
#include <netinet/sctp_sysctl.h>
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include <netinet/sctp_pcb.h>
#include <netinet/sctp_header.h>
#include <netinet/sctputil.h>
#include <netinet/sctp_output.h>
#include <netinet/sctp_asconf.h>
/*
* debug flags:
* SCTP_DEBUG_ASCONF1: protocol info, general info and errors
* SCTP_DEBUG_ASCONF2: detailed info
*/
#ifdef SCTP_DEBUG
#endif /* SCTP_DEBUG */
static int
sctp_asconf_get_source_ip(struct mbuf *m, struct sockaddr *sa)
{
struct ip *iph;
struct sockaddr_in *sin;
#ifdef INET6
struct sockaddr_in6 *sin6;
#endif
iph = mtod(m, struct ip *);
if (iph->ip_v == IPVERSION) {
/* IPv4 source */
sin = (struct sockaddr_in *)sa;
bzero(sin, sizeof(*sin));
sin->sin_family = AF_INET;
sin->sin_len = sizeof(struct sockaddr_in);
sin->sin_port = 0;
sin->sin_addr.s_addr = iph->ip_src.s_addr;
return 0;
}
#ifdef INET6
else if (iph->ip_v == (IPV6_VERSION >> 4)) {
/* IPv6 source */
struct ip6_hdr *ip6;
sin6 = (struct sockaddr_in6 *)sa;
bzero(sin6, sizeof(*sin6));
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(struct sockaddr_in6);
sin6->sin6_port = 0;
ip6 = mtod(m, struct ip6_hdr *);
sin6->sin6_addr = ip6->ip6_src;
return 0;
}
#endif /* INET6 */
else
return -1;
}
/*
* draft-ietf-tsvwg-addip-sctp
*
* Address management only currently supported For the bound all case: the asoc
* local addr list is always a "DO NOT USE" list For the subset bound case:
* If ASCONFs are allowed: the endpoint local addr list is the usable address
* list the asoc local addr list is the "DO NOT USE" list If ASCONFs are not
* allowed: the endpoint local addr list is the default usable list the asoc
* local addr list is the usable address list
*
* An ASCONF parameter queue exists per asoc which holds the pending address
* operations. Lists are updated upon receipt of ASCONF-ACK.
*
* Deleted addresses are always immediately removed from the lists as they will
* (shortly) no longer exist in the kernel. We send ASCONFs as a courtesy,
* only if allowed.
*/
/*
* ASCONF parameter processing response_required: set if a reply is required
* (eg. SUCCESS_REPORT) returns a mbuf to an "error" response parameter or
* NULL/"success" if ok FIX: allocating this many mbufs on the fly is pretty
* inefficient...
*/
static struct mbuf *
sctp_asconf_success_response(uint32_t id)
{
struct mbuf *m_reply = NULL;
struct sctp_asconf_paramhdr *aph;
m_reply = sctp_get_mbuf_for_msg(sizeof(struct sctp_asconf_paramhdr),
0, M_DONTWAIT, 1, MT_DATA);
if (m_reply == NULL) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("asconf_success_response: couldn't get mbuf!\n");
}
#endif /* SCTP_DEBUG */
return NULL;
}
aph = mtod(m_reply, struct sctp_asconf_paramhdr *);
aph->correlation_id = id;
aph->ph.param_type = htons(SCTP_SUCCESS_REPORT);
aph->ph.param_length = sizeof(struct sctp_asconf_paramhdr);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_reply) = aph->ph.param_length;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
aph->ph.param_length = htons(aph->ph.param_length);
return m_reply;
}
static struct mbuf *
sctp_asconf_error_response(uint32_t id, uint16_t cause, uint8_t * error_tlv,
uint16_t tlv_length)
{
struct mbuf *m_reply = NULL;
struct sctp_asconf_paramhdr *aph;
struct sctp_error_cause *error;
uint8_t *tlv;
m_reply = sctp_get_mbuf_for_msg((sizeof(struct sctp_asconf_paramhdr) +
tlv_length +
sizeof(struct sctp_error_cause)),
0, M_DONTWAIT, 1, MT_DATA);
if (m_reply == NULL) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("asconf_error_response: couldn't get mbuf!\n");
}
#endif /* SCTP_DEBUG */
return NULL;
}
aph = mtod(m_reply, struct sctp_asconf_paramhdr *);
error = (struct sctp_error_cause *)(aph + 1);
aph->correlation_id = id;
aph->ph.param_type = htons(SCTP_ERROR_CAUSE_IND);
error->code = htons(cause);
error->length = tlv_length + sizeof(struct sctp_error_cause);
aph->ph.param_length = error->length +
sizeof(struct sctp_asconf_paramhdr);
if (aph->ph.param_length > MLEN) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("asconf_error_response: tlv_length (%xh) too big\n",
tlv_length);
}
#endif /* SCTP_DEBUG */
sctp_m_freem(m_reply); /* discard */
return NULL;
}
if (error_tlv != NULL) {
tlv = (uint8_t *) (error + 1);
memcpy(tlv, error_tlv, tlv_length);
}
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_reply) = aph->ph.param_length;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
error->length = htons(error->length);
aph->ph.param_length = htons(aph->ph.param_length);
return m_reply;
}
static struct mbuf *
sctp_process_asconf_add_ip(struct mbuf *m, struct sctp_asconf_paramhdr *aph,
struct sctp_tcb *stcb, int response_required)
{
struct mbuf *m_reply = NULL;
struct sockaddr_storage sa_source, sa_store;
struct sctp_ipv4addr_param *v4addr;
uint16_t param_type, param_length, aparam_length;
struct sockaddr *sa;
struct sockaddr_in *sin;
int zero_address = 0;
#ifdef INET6
struct sockaddr_in6 *sin6;
struct sctp_ipv6addr_param *v6addr;
#endif /* INET6 */
aparam_length = ntohs(aph->ph.param_length);
v4addr = (struct sctp_ipv4addr_param *)(aph + 1);
#ifdef INET6
v6addr = (struct sctp_ipv6addr_param *)(aph + 1);
#endif /* INET6 */
param_type = ntohs(v4addr->ph.param_type);
param_length = ntohs(v4addr->ph.param_length);
sa = (struct sockaddr *)&sa_store;
switch (param_type) {
case SCTP_IPV4_ADDRESS:
if (param_length != sizeof(struct sctp_ipv4addr_param)) {
/* invalid param size */
return NULL;
}
sin = (struct sockaddr_in *)&sa_store;
bzero(sin, sizeof(*sin));
sin->sin_family = AF_INET;
sin->sin_len = sizeof(struct sockaddr_in);
sin->sin_port = stcb->rport;
sin->sin_addr.s_addr = v4addr->addr;
if (sin->sin_addr.s_addr == INADDR_ANY)
zero_address = 1;
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_add_ip: adding ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
break;
case SCTP_IPV6_ADDRESS:
#ifdef INET6
if (param_length != sizeof(struct sctp_ipv6addr_param)) {
/* invalid param size */
return NULL;
}
sin6 = (struct sockaddr_in6 *)&sa_store;
bzero(sin6, sizeof(*sin6));
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(struct sockaddr_in6);
sin6->sin6_port = stcb->rport;
memcpy((caddr_t)&sin6->sin6_addr, v6addr->addr,
sizeof(struct in6_addr));
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
zero_address = 1;
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_add_ip: adding ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
#else
/* IPv6 not enabled! */
/* FIX ME: currently sends back an invalid param error */
m_reply = sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_INVALID_PARAM, (uint8_t *) aph, aparam_length);
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_add_ip: v6 disabled- skipping ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
return m_reply;
#endif /* INET6 */
break;
default:
m_reply = sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_UNRESOLVABLE_ADDR, (uint8_t *) aph,
aparam_length);
return m_reply;
} /* end switch */
/* if 0.0.0.0/::0, add the source address instead */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (zero_address && sctp_nat_friendly) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sa = (struct sockaddr *)&sa_source;
sctp_asconf_get_source_ip(m, sa);
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_add_ip: using source addr ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
}
/* add the address */
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
if (sctp_add_remote_addr(stcb, sa, SCTP_DONOT_SETSCOPE,
SCTP_ADDR_DYNAMIC_ADDED) != 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_add_ip: error adding address\n");
}
#endif /* SCTP_DEBUG */
m_reply = sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_RESOURCE_SHORTAGE, (uint8_t *) aph,
aparam_length);
} else {
/* notify upper layer */
sctp_ulp_notify(SCTP_NOTIFY_ASCONF_ADD_IP, stcb, 0, sa);
if (response_required) {
m_reply =
sctp_asconf_success_response(aph->correlation_id);
}
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
sctp_timer_stop(SCTP_TIMER_TYPE_HEARTBEAT, stcb->sctp_ep, stcb, NULL, SCTP_FROM_SCTP_ASCONF + SCTP_LOC_1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sctp_timer_start(SCTP_TIMER_TYPE_HEARTBEAT, stcb->sctp_ep, stcb, NULL);
}
return m_reply;
}
static int
sctp_asconf_del_remote_addrs_except(struct sctp_tcb *stcb,
struct sockaddr *src)
{
struct sctp_nets *src_net, *net;
/* make sure the source address exists as a destination net */
src_net = sctp_findnet(stcb, src);
if (src_net == NULL) {
/* not found */
return -1;
}
/* delete all destination addresses except the source */
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
if (net != src_net) {
/* delete this address */
sctp_remove_net(stcb, net);
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("asconf_del_remote_addrs_except: deleting ");
sctp_print_address((struct sockaddr *)&net->ro._l_addr);
}
#endif
/* notify upper layer */
sctp_ulp_notify(SCTP_NOTIFY_ASCONF_DELETE_IP, stcb, 0,
(struct sockaddr *)&net->ro._l_addr);
}
}
return 0;
}
static struct mbuf *
sctp_process_asconf_delete_ip(struct mbuf *m, struct sctp_asconf_paramhdr *aph,
struct sctp_tcb *stcb, int response_required)
{
struct mbuf *m_reply = NULL;
struct sockaddr_storage sa_source, sa_store;
struct sctp_ipv4addr_param *v4addr;
uint16_t param_type, param_length, aparam_length;
struct sockaddr *sa;
struct sockaddr_in *sin;
int zero_address = 0;
int result;
#ifdef INET6
struct sockaddr_in6 *sin6;
struct sctp_ipv6addr_param *v6addr;
#endif /* INET6 */
/* get the source IP address for src and 0.0.0.0/::0 delete checks */
sctp_asconf_get_source_ip(m, (struct sockaddr *)&sa_source);
aparam_length = ntohs(aph->ph.param_length);
v4addr = (struct sctp_ipv4addr_param *)(aph + 1);
#ifdef INET6
v6addr = (struct sctp_ipv6addr_param *)(aph + 1);
#endif /* INET6 */
param_type = ntohs(v4addr->ph.param_type);
param_length = ntohs(v4addr->ph.param_length);
sa = (struct sockaddr *)&sa_store;
switch (param_type) {
case SCTP_IPV4_ADDRESS:
if (param_length != sizeof(struct sctp_ipv4addr_param)) {
/* invalid param size */
return NULL;
}
sin = (struct sockaddr_in *)&sa_store;
bzero(sin, sizeof(*sin));
sin->sin_family = AF_INET;
sin->sin_len = sizeof(struct sockaddr_in);
sin->sin_port = stcb->rport;
sin->sin_addr.s_addr = v4addr->addr;
if (sin->sin_addr.s_addr == INADDR_ANY)
zero_address = 1;
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_delete_ip: deleting ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
break;
case SCTP_IPV6_ADDRESS:
if (param_length != sizeof(struct sctp_ipv6addr_param)) {
/* invalid param size */
return NULL;
}
#ifdef INET6
sin6 = (struct sockaddr_in6 *)&sa_store;
bzero(sin6, sizeof(*sin6));
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(struct sockaddr_in6);
sin6->sin6_port = stcb->rport;
memcpy(&sin6->sin6_addr, v6addr->addr,
sizeof(struct in6_addr));
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
zero_address = 1;
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_delete_ip: deleting ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
#else
/* IPv6 not enabled! No "action" needed; just ack it */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_delete_ip: v6 disabled- ignoring: ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
/* just respond with a "success" ASCONF-ACK */
return NULL;
#endif /* INET6 */
break;
default:
m_reply = sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_UNRESOLVABLE_ADDR, (uint8_t *) aph,
aparam_length);
return m_reply;
}
/* make sure the source address is not being deleted */
if (sctp_cmpaddr(sa, (struct sockaddr *)&sa_source)) {
/* trying to delete the source address! */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_delete_ip: tried to delete source addr\n");
}
#endif /* SCTP_DEBUG */
m_reply = sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_DELETING_SRC_ADDR, (uint8_t *) aph,
aparam_length);
return m_reply;
}
/* if deleting 0.0.0.0/::0, delete all addresses except src addr */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (zero_address && sctp_nat_friendly) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
result = sctp_asconf_del_remote_addrs_except(stcb,
(struct sockaddr *)&sa_source);
if (result) {
/* src address did not exist? */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_delete_ip: src addr does not exist?\n");
}
#endif /* SCTP_DEBUG */
/* what error to reply with?? */
m_reply =
sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_REQUEST_REFUSED, (uint8_t *) aph,
aparam_length);
} else if (response_required) {
m_reply =
sctp_asconf_success_response(aph->correlation_id);
}
return m_reply;
}
/* delete the address */
result = sctp_del_remote_addr(stcb, sa);
/*
* note if result == -2, the address doesn't exist in the asoc but
* since it's being deleted anyways, we just ack the delete -- but
* this probably means something has already gone awry
*/
if (result == -1) {
/* only one address in the asoc */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_delete_ip: tried to delete last IP addr!\n");
}
#endif /* SCTP_DEBUG */
m_reply = sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_DELETING_LAST_ADDR, (uint8_t *) aph,
aparam_length);
} else {
if (response_required) {
m_reply = sctp_asconf_success_response(aph->correlation_id);
}
/* notify upper layer */
sctp_ulp_notify(SCTP_NOTIFY_ASCONF_DELETE_IP, stcb, 0, sa);
}
return m_reply;
}
static struct mbuf *
sctp_process_asconf_set_primary(struct mbuf *m,
struct sctp_asconf_paramhdr *aph, struct sctp_tcb *stcb,
int response_required)
{
struct mbuf *m_reply = NULL;
struct sockaddr_storage sa_source, sa_store;
struct sctp_ipv4addr_param *v4addr;
uint16_t param_type, param_length, aparam_length;
struct sockaddr *sa;
struct sockaddr_in *sin;
int zero_address = 0;
#ifdef INET6
struct sockaddr_in6 *sin6;
struct sctp_ipv6addr_param *v6addr;
#endif /* INET6 */
aparam_length = ntohs(aph->ph.param_length);
v4addr = (struct sctp_ipv4addr_param *)(aph + 1);
#ifdef INET6
v6addr = (struct sctp_ipv6addr_param *)(aph + 1);
#endif /* INET6 */
param_type = ntohs(v4addr->ph.param_type);
param_length = ntohs(v4addr->ph.param_length);
sa = (struct sockaddr *)&sa_store;
switch (param_type) {
case SCTP_IPV4_ADDRESS:
if (param_length != sizeof(struct sctp_ipv4addr_param)) {
/* invalid param size */
return NULL;
}
sin = (struct sockaddr_in *)&sa_store;
bzero(sin, sizeof(*sin));
sin->sin_family = AF_INET;
sin->sin_len = sizeof(struct sockaddr_in);
sin->sin_addr.s_addr = v4addr->addr;
if (sin->sin_addr.s_addr == INADDR_ANY)
zero_address = 1;
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_set_primary: ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
break;
case SCTP_IPV6_ADDRESS:
if (param_length != sizeof(struct sctp_ipv6addr_param)) {
/* invalid param size */
return NULL;
}
#ifdef INET6
sin6 = (struct sockaddr_in6 *)&sa_store;
bzero(sin6, sizeof(*sin6));
sin6->sin6_family = AF_INET6;
sin6->sin6_len = sizeof(struct sockaddr_in6);
memcpy((caddr_t)&sin6->sin6_addr, v6addr->addr,
sizeof(struct in6_addr));
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr))
zero_address = 1;
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_set_primary: ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
#else
/* IPv6 not enabled! No "action" needed; just ack it */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_set_primary: v6 disabled- ignoring: ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
/* just respond with a "success" ASCONF-ACK */
return NULL;
#endif /* INET6 */
break;
default:
m_reply = sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_UNRESOLVABLE_ADDR, (uint8_t *) aph,
aparam_length);
return m_reply;
}
/* if 0.0.0.0/::0, use the source address instead */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (zero_address && sctp_nat_friendly) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sa = (struct sockaddr *)&sa_source;
sctp_asconf_get_source_ip(m, sa);
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_set_primary: using source addr ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
}
/* set the primary address */
if (sctp_set_primary_addr(stcb, sa, NULL) == 0) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_set_primary: primary address set\n");
}
#endif /* SCTP_DEBUG */
/* notify upper layer */
sctp_ulp_notify(SCTP_NOTIFY_ASCONF_SET_PRIMARY, stcb, 0, sa);
if (response_required) {
m_reply = sctp_asconf_success_response(aph->correlation_id);
}
} else {
/* couldn't set the requested primary address! */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_asconf_set_primary: set primary failed!\n");
}
#endif /* SCTP_DEBUG */
/* must have been an invalid address, so report */
m_reply = sctp_asconf_error_response(aph->correlation_id,
SCTP_CAUSE_UNRESOLVABLE_ADDR, (uint8_t *) aph,
aparam_length);
}
return m_reply;
}
/*
* handles an ASCONF chunk.
* if all parameters are processed ok, send a plain (empty) ASCONF-ACK
*/
void
sctp_handle_asconf(struct mbuf *m, unsigned int offset,
struct sctp_asconf_chunk *cp, struct sctp_tcb *stcb)
{
struct sctp_association *asoc;
uint32_t serial_num;
struct mbuf *m_ack, *m_result, *m_tail;
struct sctp_asconf_ack_chunk *ack_cp;
struct sctp_asconf_paramhdr *aph, *ack_aph;
struct sctp_ipv6addr_param *p_addr;
unsigned int asconf_limit;
int error = 0; /* did an error occur? */
/* asconf param buffer */
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
uint8_t aparam_buf[SCTP_PARAM_BUFFER_SIZE];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* verify minimum length */
if (ntohs(cp->ch.chunk_length) < sizeof(struct sctp_asconf_chunk)) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: chunk too small = %xh\n",
ntohs(cp->ch.chunk_length));
}
#endif /* SCTP_DEBUG */
return;
}
asoc = &stcb->asoc;
serial_num = ntohl(cp->serial_number);
if (serial_num == asoc->asconf_seq_in) {
/* got a duplicate ASCONF */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: got duplicate serial number = %xh\n",
serial_num);
}
#endif /* SCTP_DEBUG */
/* resend last ASCONF-ACK... */
sctp_send_asconf_ack(stcb, 1);
return;
} else if (serial_num != (asoc->asconf_seq_in + 1)) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: incorrect serial number = %xh (expected next = %xh)\n",
serial_num, asoc->asconf_seq_in + 1);
}
#endif /* SCTP_DEBUG */
return;
}
/* it's the expected "next" sequence number, so process it */
asoc->asconf_seq_in = serial_num; /* update sequence */
/* get length of all the param's in the ASCONF */
asconf_limit = offset + ntohs(cp->ch.chunk_length);
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: asconf_limit=%u, sequence=%xh\n",
asconf_limit, serial_num);
}
#endif /* SCTP_DEBUG */
if (asoc->last_asconf_ack_sent != NULL) {
/* free last ASCONF-ACK message sent */
sctp_m_freem(asoc->last_asconf_ack_sent);
asoc->last_asconf_ack_sent = NULL;
}
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
m_ack = sctp_get_mbuf_for_msg(sizeof(struct sctp_asconf_ack_chunk), 0,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
M_DONTWAIT, 1, MT_DATA);
if (m_ack == NULL) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: couldn't get mbuf!\n");
}
#endif /* SCTP_DEBUG */
return;
}
m_tail = m_ack; /* current reply chain's tail */
/* fill in ASCONF-ACK header */
ack_cp = mtod(m_ack, struct sctp_asconf_ack_chunk *);
ack_cp->ch.chunk_type = SCTP_ASCONF_ACK;
ack_cp->ch.chunk_flags = 0;
ack_cp->serial_number = htonl(serial_num);
/* set initial lengths (eg. just an ASCONF-ACK), ntohx at the end! */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_ack) = sizeof(struct sctp_asconf_ack_chunk);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
ack_cp->ch.chunk_length = sizeof(struct sctp_asconf_ack_chunk);
/* skip the lookup address parameter */
offset += sizeof(struct sctp_asconf_chunk);
p_addr = (struct sctp_ipv6addr_param *)sctp_m_getptr(m, offset, sizeof(struct sctp_paramhdr), (uint8_t *) & aparam_buf);
if (p_addr == NULL) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: couldn't get lookup addr!\n");
}
#endif /* SCTP_DEBUG */
/* respond with a missing/invalid mandatory parameter error */
return;
}
/* param_length is already validated in process_control... */
offset += ntohs(p_addr->ph.param_length); /* skip lookup addr */
/* get pointer to first asconf param in ASCONF-ACK */
ack_aph = (struct sctp_asconf_paramhdr *)(mtod(m_ack, caddr_t)+sizeof(struct sctp_asconf_ack_chunk));
if (ack_aph == NULL) {
#ifdef SCTP_DEBUG
printf("Gak in asconf2\n");
#endif
return;
}
/* get pointer to first asconf param in ASCONF */
aph = (struct sctp_asconf_paramhdr *)sctp_m_getptr(m, offset, sizeof(struct sctp_asconf_paramhdr), (uint8_t *) & aparam_buf);
if (aph == NULL) {
#ifdef SCTP_DEBUG
printf("Empty ASCONF received?\n");
#endif
goto send_reply;
}
/* process through all parameters */
while (aph != NULL) {
unsigned int param_length, param_type;
param_type = ntohs(aph->ph.param_type);
param_length = ntohs(aph->ph.param_length);
if (offset + param_length > asconf_limit) {
/* parameter goes beyond end of chunk! */
sctp_m_freem(m_ack);
return;
}
m_result = NULL;
if (param_length > sizeof(aparam_buf)) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: param length (%u) larger than buffer size!\n", param_length);
}
#endif /* SCTP_DEBUG */
sctp_m_freem(m_ack);
return;
}
if (param_length <= sizeof(struct sctp_paramhdr)) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: param length (%u) too short\n", param_length);
}
#endif /* SCTP_DEBUG */
sctp_m_freem(m_ack);
}
/* get the entire parameter */
aph = (struct sctp_asconf_paramhdr *)sctp_m_getptr(m, offset, param_length, aparam_buf);
if (aph == NULL) {
#ifdef SCTP_DEBUG
printf("Gag\n");
#endif
sctp_m_freem(m_ack);
return;
}
switch (param_type) {
case SCTP_ADD_IP_ADDRESS:
asoc->peer_supports_asconf = 1;
m_result = sctp_process_asconf_add_ip(m, aph, stcb,
error);
break;
case SCTP_DEL_IP_ADDRESS:
asoc->peer_supports_asconf = 1;
m_result = sctp_process_asconf_delete_ip(m, aph, stcb,
error);
break;
case SCTP_ERROR_CAUSE_IND:
/* not valid in an ASCONF chunk */
break;
case SCTP_SET_PRIM_ADDR:
asoc->peer_supports_asconf = 1;
m_result = sctp_process_asconf_set_primary(m, aph,
stcb, error);
break;
case SCTP_SUCCESS_REPORT:
/* not valid in an ASCONF chunk */
break;
case SCTP_ULP_ADAPTATION:
/* FIX */
break;
default:
if ((param_type & 0x8000) == 0) {
/* Been told to STOP at this param */
asconf_limit = offset;
/*
* FIX FIX - We need to call
* sctp_arethere_unrecognized_parameters()
* to get a operr and send it for any
* param's with the 0x4000 bit set OR do it
* here ourselves... note we still must STOP
* if the 0x8000 bit is clear.
*/
}
/* unknown/invalid param type */
break;
} /* switch */
/* add any (error) result to the reply mbuf chain */
if (m_result != NULL) {
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_NEXT(m_tail) = m_result;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
m_tail = m_result;
/* update lengths, make sure it's aligned too */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_result) = SCTP_SIZE32(SCTP_BUF_LEN(m_result));
ack_cp->ch.chunk_length += SCTP_BUF_LEN(m_result);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* set flag to force success reports */
error = 1;
}
offset += SCTP_SIZE32(param_length);
/* update remaining ASCONF message length to process */
if (offset >= asconf_limit) {
/* no more data in the mbuf chain */
break;
}
/* get pointer to next asconf param */
aph = (struct sctp_asconf_paramhdr *)sctp_m_getptr(m, offset,
sizeof(struct sctp_asconf_paramhdr),
(uint8_t *) & aparam_buf);
if (aph == NULL) {
/* can't get an asconf paramhdr */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf: can't get asconf param hdr!\n");
}
#endif /* SCTP_DEBUG */
/* FIX ME - add error here... */
}
} /* while */
send_reply:
ack_cp->ch.chunk_length = htons(ack_cp->ch.chunk_length);
/* save the ASCONF-ACK reply */
asoc->last_asconf_ack_sent = m_ack;
/* see if last_control_chunk_from is set properly (use IP src addr) */
if (stcb->asoc.last_control_chunk_from == NULL) {
/*
* this could happen if the source address was just newly
* added
*/
struct ip *iph;
struct sctphdr *sh;
struct sockaddr_storage from_store;
struct sockaddr *from = (struct sockaddr *)&from_store;
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1)
printf("handle_asconf: looking up net for IP source address\n");
#endif /* SCTP_DEBUG */
/* pullup already done, IP options already stripped */
iph = mtod(m, struct ip *);
sh = (struct sctphdr *)((caddr_t)iph + sizeof(*iph));
if (iph->ip_v == IPVERSION) {
struct sockaddr_in *from4;
from4 = (struct sockaddr_in *)&from_store;
bzero(from4, sizeof(*from4));
from4->sin_family = AF_INET;
from4->sin_len = sizeof(struct sockaddr_in);
from4->sin_addr.s_addr = iph->ip_src.s_addr;
from4->sin_port = sh->src_port;
} else if (iph->ip_v == (IPV6_VERSION >> 4)) {
struct ip6_hdr *ip6;
struct sockaddr_in6 *from6;
ip6 = mtod(m, struct ip6_hdr *);
from6 = (struct sockaddr_in6 *)&from_store;
bzero(from6, sizeof(*from6));
from6->sin6_family = AF_INET6;
from6->sin6_len = sizeof(struct sockaddr_in6);
from6->sin6_addr = ip6->ip6_src;
from6->sin6_port = sh->src_port;
/* Get the scopes in properly to the sin6 addr's */
/* we probably don't need these operations */
(void)sa6_recoverscope(from6);
sa6_embedscope(from6, ip6_use_defzone);
} else {
/* unknown address type */
from = NULL;
}
if (from != NULL) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("Looking for IP source: ");
sctp_print_address(from);
}
#endif /* SCTP_DEBUG */
/* look up the from address */
stcb->asoc.last_control_chunk_from = sctp_findnet(stcb, from);
#ifdef SCTP_DEBUG
if ((stcb->asoc.last_control_chunk_from == NULL) &&
(sctp_debug_on & SCTP_DEBUG_ASCONF1))
printf("handle_asconf: IP source address not found?!\n");
#endif /* SCTP_DEBUG */
}
}
/* and send it (a new one) out... */
sctp_send_asconf_ack(stcb, 0);
}
/*
* does the address match? returns 0 if not, 1 if so
*/
static uint32_t
sctp_asconf_addr_match(struct sctp_asconf_addr *aa, struct sockaddr *sa)
{
#ifdef INET6
if (sa->sa_family == AF_INET6) {
/* IPv6 sa address */
/* XXX scopeid */
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sa;
if ((aa->ap.addrp.ph.param_type == SCTP_IPV6_ADDRESS) &&
(memcmp(&aa->ap.addrp.addr, &sin6->sin6_addr,
sizeof(struct in6_addr)) == 0)) {
return (1);
}
} else
#endif /* INET6 */
if (sa->sa_family == AF_INET) {
/* IPv4 sa address */
struct sockaddr_in *sin = (struct sockaddr_in *)sa;
if ((aa->ap.addrp.ph.param_type == SCTP_IPV4_ADDRESS) &&
(memcmp(&aa->ap.addrp.addr, &sin->sin_addr,
sizeof(struct in_addr)) == 0)) {
return (1);
}
}
return (0);
}
/*
* Cleanup for non-responded/OP ERR'd ASCONF
*/
void
sctp_asconf_cleanup(struct sctp_tcb *stcb, struct sctp_nets *net)
{
/* mark peer as ASCONF incapable */
stcb->asoc.peer_supports_asconf = 0;
/*
* clear out any existing asconfs going out
*/
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
sctp_timer_stop(SCTP_TIMER_TYPE_ASCONF, stcb->sctp_ep, stcb, net, SCTP_FROM_SCTP_ASCONF + SCTP_LOC_2);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.asconf_seq_out++;
/* remove the old ASCONF on our outbound queue */
sctp_toss_old_asconf(stcb);
}
/*
* process an ADD/DELETE IP ack from peer.
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
* addr corresponding sctp_ifa to the address being added/deleted.
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
* type: SCTP_ADD_IP_ADDRESS or SCTP_DEL_IP_ADDRESS.
* flag: 1=success, 0=failure.
*/
static void
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_asconf_addr_mgmt_ack(struct sctp_tcb *stcb, struct sctp_ifa *addr,
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
uint16_t type, uint32_t flag)
{
/*
* do the necessary asoc list work- if we get a failure indication,
* leave the address on the "do not use" asoc list if we get a
* success indication, remove the address from the list
*/
/*
* Note: this will only occur for ADD_IP_ADDRESS, since
* DEL_IP_ADDRESS is never actually added to the list...
*/
if (flag) {
/* success case, so remove from the list */
sctp_del_local_addr_assoc(stcb, addr);
}
/* else, leave it on the list */
}
/*
* add an asconf add/delete IP address parameter to the queue.
* type = SCTP_ADD_IP_ADDRESS, SCTP_DEL_IP_ADDRESS, SCTP_SET_PRIM_ADDR.
* returns 0 if completed, non-zero if not completed.
* NOTE: if adding, but delete already scheduled (and not yet sent out),
* simply remove from queue. Same for deleting an address already scheduled
* for add. If a duplicate operation is found, ignore the new one.
*/
static uint32_t
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_asconf_queue_add(struct sctp_tcb *stcb, struct sctp_ifa *ifa, uint16_t type)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_asconf_addr *aa, *aa_next;
struct sockaddr *sa;
/* see if peer supports ASCONF */
if (stcb->asoc.peer_supports_asconf == 0) {
return (-1);
}
/* make sure the request isn't already in the queue */
for (aa = TAILQ_FIRST(&stcb->asoc.asconf_queue); aa != NULL;
aa = aa_next) {
aa_next = TAILQ_NEXT(aa, next);
/* address match? */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_asconf_addr_match(aa, &ifa->address.sa) == 0)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
/* is the request already in queue (sent or not) */
if (aa->ap.aph.ph.param_type == type) {
return (-1);
}
/* is the negative request already in queue, and not sent */
if (aa->sent == 0 &&
/* add requested, delete already queued */
((type == SCTP_ADD_IP_ADDRESS &&
aa->ap.aph.ph.param_type == SCTP_DEL_IP_ADDRESS) ||
/* delete requested, add already queued */
(type == SCTP_DEL_IP_ADDRESS &&
aa->ap.aph.ph.param_type == SCTP_ADD_IP_ADDRESS))) {
/* delete the existing entry in the queue */
TAILQ_REMOVE(&stcb->asoc.asconf_queue, aa, next);
/* take the entry off the appropriate list */
sctp_asconf_addr_mgmt_ack(stcb, aa->ifa, type, 1);
/* free the entry */
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
sctp_free_ifa(aa->ifa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_FREE(aa);
return (-1);
}
} /* for each aa */
/* adding new request to the queue */
SCTP_MALLOC(aa, struct sctp_asconf_addr *, sizeof(*aa), "AsconfAddr");
if (aa == NULL) {
/* didn't get memory */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("asconf_queue_add: failed to get memory!\n");
}
#endif /* SCTP_DEBUG */
return (-1);
}
/* fill in asconf address parameter fields */
/* top level elements are "networked" during send */
aa->ap.aph.ph.param_type = type;
aa->ifa = ifa;
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
atomic_add_int(&ifa->refcount, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* correlation_id filled in during send routine later... */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (ifa->address.sa.sa_family == AF_INET6) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* IPv6 address */
struct sockaddr_in6 *sin6;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sin6 = (struct sockaddr_in6 *)&ifa->address.sa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sa = (struct sockaddr *)sin6;
aa->ap.addrp.ph.param_type = SCTP_IPV6_ADDRESS;
aa->ap.addrp.ph.param_length = (sizeof(struct sctp_ipv6addr_param));
aa->ap.aph.ph.param_length =
sizeof(struct sctp_asconf_paramhdr) +
sizeof(struct sctp_ipv6addr_param);
memcpy(&aa->ap.addrp.addr, &sin6->sin6_addr,
sizeof(struct in6_addr));
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
} else if (ifa->address.sa.sa_family == AF_INET) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* IPv4 address */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sockaddr_in *sin = (struct sockaddr_in *)&ifa->address.sa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
sa = (struct sockaddr *)sin;
aa->ap.addrp.ph.param_type = SCTP_IPV4_ADDRESS;
aa->ap.addrp.ph.param_length = (sizeof(struct sctp_ipv4addr_param));
aa->ap.aph.ph.param_length =
sizeof(struct sctp_asconf_paramhdr) +
sizeof(struct sctp_ipv4addr_param);
memcpy(&aa->ap.addrp.addr, &sin->sin_addr,
sizeof(struct in_addr));
} else {
/* invalid family! */
return (-1);
}
aa->sent = 0; /* clear sent flag */
/*
* if we are deleting an address it should go out last otherwise,
* add it to front of the pending queue
*/
if (type == SCTP_ADD_IP_ADDRESS) {
/* add goes to the front of the queue */
TAILQ_INSERT_HEAD(&stcb->asoc.asconf_queue, aa, next);
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF2) {
printf("asconf_queue_add: appended asconf ADD_IP_ADDRESS: ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
} else {
/* delete and set primary goes to the back of the queue */
TAILQ_INSERT_TAIL(&stcb->asoc.asconf_queue, aa, next);
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF2) {
if (type == SCTP_DEL_IP_ADDRESS) {
printf("asconf_queue_add: inserted asconf DEL_IP_ADDRESS: ");
sctp_print_address(sa);
} else {
printf("asconf_queue_add: inserted asconf SET_PRIM_ADDR: ");
sctp_print_address(sa);
}
}
#endif /* SCTP_DEBUG */
}
return (0);
}
/*
* add an asconf add/delete IP address parameter to the queue by addr.
* type = SCTP_ADD_IP_ADDRESS, SCTP_DEL_IP_ADDRESS, SCTP_SET_PRIM_ADDR.
* returns 0 if completed, non-zero if not completed.
* NOTE: if adding, but delete already scheduled (and not yet sent out),
* simply remove from queue. Same for deleting an address already scheduled
* for add. If a duplicate operation is found, ignore the new one.
*/
static uint32_t
sctp_asconf_queue_add_sa(struct sctp_tcb *stcb, struct sockaddr *sa,
uint16_t type)
{
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
struct sctp_ifa *ifa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_asconf_addr *aa, *aa_next;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
uint32_t vrf_id;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* see if peer supports ASCONF */
if (stcb->asoc.peer_supports_asconf == 0) {
return (-1);
}
/* make sure the request isn't already in the queue */
for (aa = TAILQ_FIRST(&stcb->asoc.asconf_queue); aa != NULL;
aa = aa_next) {
aa_next = TAILQ_NEXT(aa, next);
/* address match? */
if (sctp_asconf_addr_match(aa, sa) == 0)
continue;
/* is the request already in queue (sent or not) */
if (aa->ap.aph.ph.param_type == type) {
return (-1);
}
/* is the negative request already in queue, and not sent */
if (aa->sent == 1)
continue;
if (type == SCTP_ADD_IP_ADDRESS &&
aa->ap.aph.ph.param_type == SCTP_DEL_IP_ADDRESS) {
/* add requested, delete already queued */
/* delete the existing entry in the queue */
TAILQ_REMOVE(&stcb->asoc.asconf_queue, aa, next);
/* free the entry */
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
sctp_free_ifa(aa->ifa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_FREE(aa);
return (-1);
} else if (type == SCTP_DEL_IP_ADDRESS &&
aa->ap.aph.ph.param_type == SCTP_ADD_IP_ADDRESS) {
/* delete requested, add already queued */
/* delete the existing entry in the queue */
TAILQ_REMOVE(&stcb->asoc.asconf_queue, aa, next);
/* take the entry off the appropriate list */
sctp_asconf_addr_mgmt_ack(stcb, aa->ifa, type, 1);
/* free the entry */
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
sctp_free_ifa(aa->ifa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_FREE(aa);
return (-1);
}
} /* for each aa */
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
if (stcb) {
vrf_id = stcb->asoc.vrf_id;
} else {
vrf_id = SCTP_DEFAULT_VRFID;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
ifa = sctp_find_ifa_by_addr(sa, vrf_id, 0);
if (ifa == NULL) {
/* Invalid address */
return (-1);
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* adding new request to the queue */
SCTP_MALLOC(aa, struct sctp_asconf_addr *, sizeof(*aa), "AsconfAddr");
if (aa == NULL) {
/* didn't get memory */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("asconf_queue_add_sa: failed to get memory!\n");
}
#endif /* SCTP_DEBUG */
return (-1);
}
/* fill in asconf address parameter fields */
/* top level elements are "networked" during send */
aa->ap.aph.ph.param_type = type;
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
aa->ifa = ifa;
atomic_add_int(&ifa->refcount, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* correlation_id filled in during send routine later... */
if (sa->sa_family == AF_INET6) {
/* IPv6 address */
struct sockaddr_in6 *sin6;
sin6 = (struct sockaddr_in6 *)sa;
aa->ap.addrp.ph.param_type = SCTP_IPV6_ADDRESS;
aa->ap.addrp.ph.param_length = (sizeof(struct sctp_ipv6addr_param));
aa->ap.aph.ph.param_length = sizeof(struct sctp_asconf_paramhdr) + sizeof(struct sctp_ipv6addr_param);
memcpy(&aa->ap.addrp.addr, &sin6->sin6_addr,
sizeof(struct in6_addr));
} else if (sa->sa_family == AF_INET) {
/* IPv4 address */
struct sockaddr_in *sin = (struct sockaddr_in *)sa;
aa->ap.addrp.ph.param_type = SCTP_IPV4_ADDRESS;
aa->ap.addrp.ph.param_length = (sizeof(struct sctp_ipv4addr_param));
aa->ap.aph.ph.param_length = sizeof(struct sctp_asconf_paramhdr) + sizeof(struct sctp_ipv4addr_param);
memcpy(&aa->ap.addrp.addr, &sin->sin_addr,
sizeof(struct in_addr));
} else {
/* invalid family! */
-Fixes first of all the getcred on IPv6 and V4. The copy's were incorrect and so was the locking. -A bug was also found that would create a race and panic when an abort arrived on a socket being read from. -Also fix the reader to get MSG_TRUNC when a partial delivery is aborted. -Also addresses a couple of coverity caught error path memory leaks and a couple of other valid complaints Approved by: gnn
2006-11-08 00:21:13 +00:00
SCTP_FREE(aa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (-1);
}
aa->sent = 0; /* clear sent flag */
/*
* if we are deleting an address it should go out last otherwise,
* add it to front of the pending queue
*/
if (type == SCTP_ADD_IP_ADDRESS) {
/* add goes to the front of the queue */
TAILQ_INSERT_HEAD(&stcb->asoc.asconf_queue, aa, next);
} else {
/* delete and set primary goes to the back of the queue */
TAILQ_INSERT_TAIL(&stcb->asoc.asconf_queue, aa, next);
}
return (0);
}
/*
* find a specific asconf param on our "sent" queue
*/
static struct sctp_asconf_addr *
sctp_asconf_find_param(struct sctp_tcb *stcb, uint32_t correlation_id)
{
struct sctp_asconf_addr *aa;
TAILQ_FOREACH(aa, &stcb->asoc.asconf_queue, next) {
if (aa->ap.aph.correlation_id == correlation_id &&
aa->sent == 1) {
/* found it */
return (aa);
}
}
/* didn't find it */
return (NULL);
}
/*
* process an SCTP_ERROR_CAUSE_IND for a ASCONF-ACK parameter and do
* notifications based on the error response
*/
static void
sctp_asconf_process_error(struct sctp_tcb *stcb,
struct sctp_asconf_paramhdr *aph)
{
struct sctp_error_cause *eh;
struct sctp_paramhdr *ph;
uint16_t param_type;
uint16_t error_code;
eh = (struct sctp_error_cause *)(aph + 1);
ph = (struct sctp_paramhdr *)(eh + 1);
/* validate lengths */
if (htons(eh->length) + sizeof(struct sctp_error_cause) >
htons(aph->ph.param_length)) {
/* invalid error cause length */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("asconf_process_error: cause element too long\n");
}
#endif /* SCTP_DEBUG */
return;
}
if (htons(ph->param_length) + sizeof(struct sctp_paramhdr) >
htons(eh->length)) {
/* invalid included TLV length */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("asconf_process_error: included TLV too long\n");
}
#endif /* SCTP_DEBUG */
return;
}
/* which error code ? */
error_code = ntohs(eh->code);
param_type = ntohs(aph->ph.param_type);
/* FIX: this should go back up the REMOTE_ERROR ULP notify */
switch (error_code) {
case SCTP_CAUSE_RESOURCE_SHORTAGE:
/* we allow ourselves to "try again" for this error */
break;
default:
/* peer can't handle it... */
switch (param_type) {
case SCTP_ADD_IP_ADDRESS:
case SCTP_DEL_IP_ADDRESS:
stcb->asoc.peer_supports_asconf = 0;
break;
case SCTP_SET_PRIM_ADDR:
stcb->asoc.peer_supports_asconf = 0;
break;
default:
break;
}
}
}
/*
* process an asconf queue param aparam: parameter to process, will be
* removed from the queue flag: 1=success, 0=failure
*/
static void
sctp_asconf_process_param_ack(struct sctp_tcb *stcb,
struct sctp_asconf_addr *aparam, uint32_t flag)
{
uint16_t param_type;
/* process this param */
param_type = aparam->ap.aph.ph.param_type;
switch (param_type) {
case SCTP_ADD_IP_ADDRESS:
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_param_ack: added IP address\n");
}
#endif /* SCTP_DEBUG */
sctp_asconf_addr_mgmt_ack(stcb, aparam->ifa, param_type, flag);
break;
case SCTP_DEL_IP_ADDRESS:
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("process_param_ack: deleted IP address\n");
}
#endif /* SCTP_DEBUG */
/* nothing really to do... lists already updated */
break;
case SCTP_SET_PRIM_ADDR:
/* nothing to do... peer may start using this addr */
if (flag == 0)
stcb->asoc.peer_supports_asconf = 0;
break;
default:
/* should NEVER happen */
break;
}
/* remove the param and free it */
TAILQ_REMOVE(&stcb->asoc.asconf_queue, aparam, next);
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
sctp_free_ifa(aparam->ifa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
SCTP_FREE(aparam);
}
/*
* cleanup from a bad asconf ack parameter
*/
static void
sctp_asconf_ack_clear(struct sctp_tcb *stcb)
{
/* assume peer doesn't really know how to do asconfs */
stcb->asoc.peer_supports_asconf = 0;
/* XXX we could free the pending queue here */
}
void
sctp_handle_asconf_ack(struct mbuf *m, int offset,
struct sctp_asconf_ack_chunk *cp, struct sctp_tcb *stcb,
struct sctp_nets *net)
{
struct sctp_association *asoc;
uint32_t serial_num;
uint16_t ack_length;
struct sctp_asconf_paramhdr *aph;
struct sctp_asconf_addr *aa, *aa_next;
uint32_t last_error_id = 0; /* last error correlation id */
uint32_t id;
struct sctp_asconf_addr *ap;
/* asconf param buffer */
- Copyright updates (aka 2007) - ZONE get now also take a type cast so it does the cast like mtod does. - New macro SCTP_LIST_EMPTY, which in bsd is just LIST_EMPTY - Removal of const in some of the static hmac functions (not needed) - Store length changes to allow for new fields in auth - Auth code updated to current draft (this should be the RFC version we think). - use uint8_t instead of u_char in LOOPBACK address comparison - Some u_int32_t converted to uint32_t (in crc code) - A bug was found in the mib counts for ordered/unordered count, this was fixed (was referencing a freed mbuf). - SCTP_ASOCLOG_OF_TSNS added (code will probably disappear after my testing completes. It allows us to keep a small log on each assoc of the last 40 TSN's in/out and stream assignment. It is NOT in options and so is only good for private builds. - Some CMT changes in prep for Jana fixing his problem with reneging when CMT is enabled (Concurrent Multipath Transfer = CMT). - Some missing mib stats added. - Correction to number of open assoc's count in mib - Correction to os_bsd.h to get right sha2 macros - Add of special AUTH_04 flags so you can compile the code with the old format (in case the peer does not yet support the latest auth code). - Nonce sum was incorrectly being set in when ecn_nonce was NOT on. - LOR in listen with implicit bind found and fixed. - Moved away from using mbuf's for socket options to using just data pointers. The mbufs were used to harmonize NetBSD code since both Net and Open used this method. We have decided to move away from that and more conform to FreeBSD style (which makes more sense). - Very very nasty bug found in some of my "debug" code. The cookie_how collision case tracking had an endless loop in it if you got a second retransmission of a cookie collision case. This would lock up a CPU .. ugly.. - auth function goes to using size_t instead of int which conforms to socketapi better - Found the nasty bug that happens after 9 days of testing.. you get the data chunk, deliver it and due to the reference to a ch-> that every now and then has been deleted (depending on the postion in the mbuf) you have an invalid ch->ch.flags.. and thus you don't advance the stream sequence number.. so you block the stream permanently. The fix is to make local variables of these guys and set them up before you have any chance of trimming the mbuf. - style fix in sctp_util.h, not sure how this got bad maybe in the last patch? (aka it may not be in the real source). - Found interesting bug when using the extended snd/rcv info where we would get an error on receiving with this. Thats because it was NOT padded to the same size as the snd_rcv info. We increase (add the pad) so the two structs are the same size in sctp_uio.h - In sctp_usrreq.c one of the most common things we did for socket options was to cast the pointer and validate the size. This as been macro-ized to help make the code more readable. - in sctputil.c two things, the socketapi class found a missing flag type (the next msg is a notification) and a missing scope recovery was also fixed. Reviewed by: gnn
2007-02-12 23:24:31 +00:00
uint8_t aparam_buf[SCTP_PARAM_BUFFER_SIZE];
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* verify minimum length */
if (ntohs(cp->ch.chunk_length) < sizeof(struct sctp_asconf_ack_chunk)) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf_ack: chunk too small = %xh\n",
ntohs(cp->ch.chunk_length));
}
#endif /* SCTP_DEBUG */
return;
}
asoc = &stcb->asoc;
serial_num = ntohl(cp->serial_number);
/*
* NOTE: we may want to handle this differently- currently, we will
* abort when we get an ack for the expected serial number + 1 (eg.
* we didn't send it), process an ack normally if it is the expected
* serial number, and re-send the previous ack for *ALL* other
* serial numbers
*/
/*
* if the serial number is the next expected, but I didn't send it,
* abort the asoc, since someone probably just hijacked us...
*/
if (serial_num == (asoc->asconf_seq_out + 1)) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf_ack: got unexpected next serial number! Aborting asoc!\n");
}
#endif /* SCTP_DEBUG */
sctp_abort_an_association(stcb->sctp_ep, stcb,
SCTP_CAUSE_ILLEGAL_ASCONF_ACK, NULL);
return;
}
if (serial_num != asoc->asconf_seq_out) {
/* got a duplicate/unexpected ASCONF-ACK */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf_ack: got duplicate/unexpected serial number = %xh (expected = %xh)\n", serial_num, asoc->asconf_seq_out);
}
#endif /* SCTP_DEBUG */
return;
}
if (stcb->asoc.asconf_sent == 0) {
/* got a unexpected ASCONF-ACK for serial not in flight */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("handle_asconf_ack: got serial number = %xh but not in flight\n", serial_num);
}
#endif /* SCTP_DEBUG */
/* nothing to do... duplicate ACK received */
return;
}
/* stop our timer */
1) Fixes on a number of different collision case LOR's. 2) Fix all "magic numbers" to be constants. 3) A collision case that would generate two associations to the same peer due to a missing lock is fixed. 4) Added tracking of where timers are stopped. Approved by: gnn
2006-12-14 17:02:55 +00:00
sctp_timer_stop(SCTP_TIMER_TYPE_ASCONF, stcb->sctp_ep, stcb, net, SCTP_FROM_SCTP_ASCONF + SCTP_LOC_3);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* process the ASCONF-ACK contents */
ack_length = ntohs(cp->ch.chunk_length) -
sizeof(struct sctp_asconf_ack_chunk);
offset += sizeof(struct sctp_asconf_ack_chunk);
/* process through all parameters */
while (ack_length >= sizeof(struct sctp_asconf_paramhdr)) {
unsigned int param_length, param_type;
/* get pointer to next asconf parameter */
aph = (struct sctp_asconf_paramhdr *)sctp_m_getptr(m, offset,
sizeof(struct sctp_asconf_paramhdr), aparam_buf);
if (aph == NULL) {
/* can't get an asconf paramhdr */
sctp_asconf_ack_clear(stcb);
return;
}
param_type = ntohs(aph->ph.param_type);
param_length = ntohs(aph->ph.param_length);
if (param_length > ack_length) {
sctp_asconf_ack_clear(stcb);
return;
}
if (param_length < sizeof(struct sctp_paramhdr)) {
sctp_asconf_ack_clear(stcb);
return;
}
/* get the complete parameter... */
if (param_length > sizeof(aparam_buf)) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("param length (%u) larger than buffer size!\n", param_length);
}
#endif /* SCTP_DEBUG */
sctp_asconf_ack_clear(stcb);
return;
}
aph = (struct sctp_asconf_paramhdr *)sctp_m_getptr(m, offset, param_length, aparam_buf);
if (aph == NULL) {
sctp_asconf_ack_clear(stcb);
return;
}
/* correlation_id is transparent to peer, no ntohl needed */
id = aph->correlation_id;
switch (param_type) {
case SCTP_ERROR_CAUSE_IND:
last_error_id = id;
/* find the corresponding asconf param in our queue */
ap = sctp_asconf_find_param(stcb, id);
if (ap == NULL) {
/* hmm... can't find this in our queue! */
break;
}
/* process the parameter, failed flag */
sctp_asconf_process_param_ack(stcb, ap, 0);
/* process the error response */
sctp_asconf_process_error(stcb, aph);
break;
case SCTP_SUCCESS_REPORT:
/* find the corresponding asconf param in our queue */
ap = sctp_asconf_find_param(stcb, id);
if (ap == NULL) {
/* hmm... can't find this in our queue! */
break;
}
/* process the parameter, success flag */
sctp_asconf_process_param_ack(stcb, ap, 1);
break;
default:
break;
} /* switch */
/* update remaining ASCONF-ACK message length to process */
ack_length -= SCTP_SIZE32(param_length);
if (ack_length <= 0) {
/* no more data in the mbuf chain */
break;
}
offset += SCTP_SIZE32(param_length);
} /* while */
/*
* if there are any "sent" params still on the queue, these are
* implicitly "success", or "failed" (if we got an error back) ...
* so process these appropriately
*
* we assume that the correlation_id's are monotonically increasing
* beginning from 1 and that we don't have *that* many outstanding
* at any given time
*/
if (last_error_id == 0)
last_error_id--;/* set to "max" value */
for (aa = TAILQ_FIRST(&stcb->asoc.asconf_queue); aa != NULL;
aa = aa_next) {
aa_next = TAILQ_NEXT(aa, next);
if (aa->sent == 1) {
/*
* implicitly successful or failed if correlation_id
* < last_error_id, then success else, failure
*/
if (aa->ap.aph.correlation_id < last_error_id)
sctp_asconf_process_param_ack(stcb, aa,
SCTP_SUCCESS_REPORT);
else
sctp_asconf_process_param_ack(stcb, aa,
SCTP_ERROR_CAUSE_IND);
} else {
/*
* since we always process in order (FIFO queue) if
* we reach one that hasn't been sent, the rest
* should not have been sent either. so, we're
* done...
*/
break;
}
}
/* update the next sequence number to use */
asoc->asconf_seq_out++;
/* remove the old ASCONF on our outbound queue */
sctp_toss_old_asconf(stcb);
/* clear the sent flag to allow new ASCONFs */
asoc->asconf_sent = 0;
if (!TAILQ_EMPTY(&stcb->asoc.asconf_queue)) {
/* we have more params, so restart our timer */
sctp_timer_start(SCTP_TIMER_TYPE_ASCONF, stcb->sctp_ep,
stcb, net);
}
}
static uint32_t
sctp_is_scopeid_in_nets(struct sctp_tcb *stcb, struct sockaddr *sa)
{
struct sockaddr_in6 *sin6, *net6;
struct sctp_nets *net;
if (sa->sa_family != AF_INET6) {
/* wrong family */
return (0);
}
sin6 = (struct sockaddr_in6 *)sa;
if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr) == 0) {
/* not link local address */
return (0);
}
/* hunt through our destination nets list for this scope_id */
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
if (((struct sockaddr *)(&net->ro._l_addr))->sa_family !=
AF_INET6)
continue;
net6 = (struct sockaddr_in6 *)&net->ro._l_addr;
if (IN6_IS_ADDR_LINKLOCAL(&net6->sin6_addr) == 0)
continue;
if (sctp_is_same_scope(sin6, net6)) {
/* found one */
return (1);
}
}
/* didn't find one */
return (0);
}
/*
* address management functions
*/
static void
sctp_addr_mgmt_assoc(struct sctp_inpcb *inp, struct sctp_tcb *stcb,
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *ifa, uint16_t type)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
int status;
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) == 0 &&
sctp_is_feature_off(inp, SCTP_PCB_FLAGS_DO_ASCONF)) {
/* subset bound, no ASCONF allowed case, so ignore */
return;
}
/*
* note: we know this is not the subset bound, no ASCONF case eg.
* this is boundall or subset bound w/ASCONF allowed
*/
/* first, make sure it's a good address family */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (ifa->address.sa.sa_family != AF_INET6 &&
ifa->address.sa.sa_family != AF_INET) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
/* make sure we're "allowed" to add this type of addr */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (ifa->address.sa.sa_family == AF_INET6) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* invalid if we're not a v6 endpoint */
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) == 0)
return;
/* is the v6 addr really valid ? */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (ifa->localifa_flags & SCTP_ADDR_IFA_UNUSEABLE) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
}
/* put this address on the "pending/do not use yet" list */
/*
* Note: we do this primarily for the subset bind case We don't have
* scoping flags at the EP level, so we must add link local/site
* local addresses to the EP, then need to "negate" them here.
* Recall that this routine is only called for the subset bound
* w/ASCONF allowed case.
*/
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_add_local_addr_assoc(stcb, ifa, 1);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/*
* check address scope if address is out of scope, don't queue
* anything... note: this would leave the address on both inp and
* asoc lists
*/
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (ifa->address.sa.sa_family == AF_INET6) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sockaddr_in6 *sin6;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sin6 = (struct sockaddr_in6 *)&ifa->address.sin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
/* we skip unspecifed addresses */
return;
}
if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr)) {
if (stcb->asoc.local_scope == 0) {
return;
}
/* is it the right link local scope? */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_is_scopeid_in_nets(stcb, &ifa->address.sa) == 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
}
}
if (stcb->asoc.site_scope == 0 &&
IN6_IS_ADDR_SITELOCAL(&sin6->sin6_addr)) {
return;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
} else if (ifa->address.sa.sa_family == AF_INET) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sockaddr_in *sin;
struct in6pcb *inp6;
inp6 = (struct in6pcb *)&inp->ip_inp.inp;
/* invalid if we are a v6 only endpoint */
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) &&
- Macroizes the V6ONLY flag check. - Added a short time wait (not used yet) constant - Corrected the type of the crc32c table (it was unsigned long and really is a uint32_t - Got rid of the user of MHeaders until they are truely needed by lower layers. - Fixed an initialization problem in the readq structure (ordering was off). - Found yet another collision bug when the random number generator returns two numbers on one side (during a collision) that are the same. Also added some tracking of cookies that will go away when we know that we have the last collision bug gone. - Fixed an init bug for book_size_scale, that was causing Early FR code to run when it should not. - Fixed a flight size tracking bug that was associated with Early FR but due to above bug also effected all FR's - Fixed it so Max Burst also will apply to Fast Retransmit. - Fixed a bug in the temporary logging code that allowed a static log array overflow - hashinit_flags is now used. - Two last mcopym's were converted to the macro sctp_m_copym that has always been used by all other places - macro sctp_m_copym was converted to upper case. - We now validate sinfo_flags on input (we did not before). - Fixed a bug that prevented a user from sending data and immediately shuting down with one send operation. - Moved to use hashdestroy instead of free() in our macros. - Fixed an init problem in our timed_wait vtag where we did not fully initialize our time-wait blocks. - Timer stops were re-positioned. - A pcb cleanup method was added, however this probably will not be used in BSD.. unless we make module loadable protocols - I think this fixes the mysterious timer bug.. it was a ordering of locks problem in the way we did timers. It now conforms to the timeout(9) manual (except for the _drain part, we had to do this a different way due to locks). - Fixed error return code so we get either CONNREUSED or CONNRESET depending on where one is in progression - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. - Purged an unused clone macro. - Fixed a read erro code issue where we were NOT getting the proper error when the connection was reset. Approved by: gnn
2007-01-15 15:12:10 +00:00
SCTP_IPV6_V6ONLY(inp6))
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sin = (struct sockaddr_in *)&ifa->address.sa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (sin->sin_addr.s_addr == 0) {
/* we skip unspecifed addresses */
return;
}
if (stcb->asoc.ipv4_local_scope == 0 &&
IN4_ISPRIVATE_ADDRESS(&sin->sin_addr)) {
return;
}
} else {
/* else, not AF_INET or AF_INET6, so skip */
return;
}
/* queue an asconf for this address add/delete */
if (sctp_is_feature_on(inp, SCTP_PCB_FLAGS_DO_ASCONF)) {
/* does the peer do asconf? */
if (stcb->asoc.peer_supports_asconf) {
/* queue an asconf for this addr */
status = sctp_asconf_queue_add(stcb, ifa, type);
/*
* if queued ok, and in correct state, set the
* ASCONF timer if in non-open state, we will set
* this timer when the state does go open and do all
* the asconf's
*/
if (status == 0 &&
SCTP_GET_STATE(&stcb->asoc) == SCTP_STATE_OPEN) {
sctp_timer_start(SCTP_TIMER_TYPE_ASCONF, inp,
stcb, stcb->asoc.primary_destination);
}
}
}
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
int
sctp_iterator_ep(struct sctp_inpcb *inp, void *ptr, uint32_t val)
{
struct sctp_asconf_iterator *asc;
struct sctp_ifa *ifa;
struct sctp_laddr *l;
int type;
int cnt_invalid = 0;
asc = (struct sctp_asconf_iterator *)ptr;
LIST_FOREACH(l, &asc->list_of_work, sctp_nxt_addr) {
ifa = l->ifa;
type = l->action;
if (ifa->address.sa.sa_family == AF_INET6) {
/* invalid if we're not a v6 endpoint */
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) == 0) {
cnt_invalid++;
if (asc->cnt == cnt_invalid)
return (1);
else
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
} else if (ifa->address.sa.sa_family == AF_INET) {
/* invalid if we are a v6 only endpoint */
struct in6pcb *inp6;
inp6 = (struct in6pcb *)&inp->ip_inp.inp;
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) &&
SCTP_IPV6_V6ONLY(inp6)) {
cnt_invalid++;
if (asc->cnt == cnt_invalid)
return (1);
else
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
} else {
/* invalid address family */
cnt_invalid++;
if (asc->cnt == cnt_invalid)
return (1);
else
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
return (0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
int
sctp_iterator_ep_end(struct sctp_inpcb *inp, void *ptr, uint32_t val)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *ifa;
struct sctp_asconf_iterator *asc;
struct sctp_laddr *laddr, *nladdr, *l;
/* Only for specific case not bound all */
asc = (struct sctp_asconf_iterator *)ptr;
LIST_FOREACH(l, &asc->list_of_work, sctp_nxt_addr) {
ifa = l->ifa;
if (l->action == SCTP_ADD_IP_ADDRESS) {
LIST_FOREACH(laddr, &inp->sctp_addr_list, sctp_nxt_addr) {
if (laddr->ifa == ifa) {
laddr->action = 0;
break;
}
}
} else if (l->action == SCTP_DEL_IP_ADDRESS) {
laddr = LIST_FIRST(&inp->sctp_addr_list);
while (laddr) {
nladdr = LIST_NEXT(laddr, sctp_nxt_addr);
/* remove only after all guys are done */
if (laddr->ifa == ifa) {
sctp_del_local_addr_ep(inp, ifa);
}
laddr = nladdr;
}
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
return (0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
void
sctp_iterator_stcb(struct sctp_inpcb *inp, struct sctp_tcb *stcb, void *ptr,
uint32_t val)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_asconf_iterator *asc;
struct sctp_ifa *ifa;
struct sctp_laddr *l;
int cnt_invalid = 0;
int type, status;
asc = (struct sctp_asconf_iterator *)ptr;
LIST_FOREACH(l, &asc->list_of_work, sctp_nxt_addr) {
ifa = l->ifa;
type = l->action;
/* Same checks again for assoc */
if (ifa->address.sa.sa_family == AF_INET6) {
/* invalid if we're not a v6 endpoint */
struct sockaddr_in6 *sin6;
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) == 0) {
cnt_invalid++;
if (asc->cnt == cnt_invalid)
return;
else
continue;
}
sin6 = (struct sockaddr_in6 *)&ifa->address.sin6;
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
/* we skip unspecifed addresses */
continue;
}
if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr)) {
if (stcb->asoc.local_scope == 0) {
continue;
}
/* is it the right link local scope? */
if (sctp_is_scopeid_in_nets(stcb, &ifa->address.sa) == 0) {
continue;
}
}
} else if (ifa->address.sa.sa_family == AF_INET) {
/* invalid if we are a v6 only endpoint */
struct in6pcb *inp6;
struct sockaddr_in *sin;
inp6 = (struct in6pcb *)&inp->ip_inp.inp;
/* invalid if we are a v6 only endpoint */
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) &&
SCTP_IPV6_V6ONLY(inp6))
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sin = (struct sockaddr_in *)&ifa->address.sa;
if (sin->sin_addr.s_addr == 0) {
/* we skip unspecifed addresses */
continue;
}
if (stcb->asoc.ipv4_local_scope == 0 &&
IN4_ISPRIVATE_ADDRESS(&sin->sin_addr)) {
continue;;
}
if ((inp->sctp_flags & SCTP_PCB_FLAGS_BOUND_V6) &&
SCTP_IPV6_V6ONLY(inp6)) {
cnt_invalid++;
if (asc->cnt == cnt_invalid)
return;
else
continue;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* invalid address family */
cnt_invalid++;
if (asc->cnt == cnt_invalid)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
else
continue;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* put this address on the "pending/do not use yet" list */
if (type == SCTP_ADD_IP_ADDRESS) {
sctp_add_local_addr_assoc(stcb, ifa, 1);
} else if (type == SCTP_DEL_IP_ADDRESS) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_nets *net;
TAILQ_FOREACH(net, &stcb->asoc.nets, sctp_next) {
struct rtentry *rt;
/* delete this address if cached */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (net->ro._s_addr &&
(net->ro._s_addr->ifa == ifa)) {
sctp_free_ifa(net->ro._s_addr);
net->ro._s_addr = NULL;
net->src_addr_selected = 0;
rt = net->ro.ro_rt;
if (rt) {
RTFREE(rt);
net->ro.ro_rt = NULL;
}
/*
* Now we deleted our src address,
* should we not also now reset the
* cwnd/rto to start as if its a new
* address?
*/
sctp_set_initial_cc_param(stcb, net);
net->RTO = stcb->asoc.initial_rto;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
} else if (type == SCTP_SET_PRIM_ADDR) {
if ((stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) == 0) {
/*
* must validate the ifa in question is in
* the ep
*/
if (sctp_is_addr_in_ep(stcb->sctp_ep, ifa) == 0) {
continue;
}
} else {
/* Need to check scopes for this guy */
if (sctp_is_address_in_scope(ifa,
stcb->asoc.ipv4_addr_legal,
stcb->asoc.ipv6_addr_legal,
stcb->asoc.loopback_scope,
stcb->asoc.ipv4_local_scope,
stcb->asoc.local_scope,
stcb->asoc.site_scope, 0) == 0) {
continue;
}
}
}
/* queue an asconf for this address add/delete */
if (sctp_is_feature_on(inp, SCTP_PCB_FLAGS_DO_ASCONF)) {
/* does the peer do asconf? */
if (stcb->asoc.peer_supports_asconf) {
/* queue an asconf for this addr */
status = sctp_asconf_queue_add(stcb, ifa, type);
/*
* if queued ok, and in correct state, set
* the ASCONF timer if in non-open state, we
* will set this timer when the state does
* go open and do all the asconf's
*/
if (status == 0 &&
SCTP_GET_STATE(&stcb->asoc) == SCTP_STATE_OPEN) {
sctp_timer_start(SCTP_TIMER_TYPE_ASCONF, inp,
stcb, stcb->asoc.primary_destination);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
void
sctp_iterator_end(void *ptr, uint32_t val)
{
struct sctp_asconf_iterator *asc;
struct sctp_ifa *ifa;
struct sctp_laddr *l, *l_next;
asc = (struct sctp_asconf_iterator *)ptr;
l = LIST_FIRST(&asc->list_of_work);
while (l != NULL) {
l_next = LIST_NEXT(l, sctp_nxt_addr);
ifa = l->ifa;
if (l->action == SCTP_ADD_IP_ADDRESS) {
/* Clear the defer use flag */
ifa->localifa_flags &= ~SCTP_ADDR_DEFER_USE;
}
sctp_free_ifa(ifa);
SCTP_ZONE_FREE(sctppcbinfo.ipi_zone_laddr, l);
SCTP_DECR_LADDR_COUNT();
l = l_next;
}
SCTP_FREE(asc);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/*
* sa is the sockaddr to ask the peer to set primary to returns: 0 =
* completed, -1 = error
*/
int32_t
sctp_set_primary_ip_address_sa(struct sctp_tcb *stcb, struct sockaddr *sa)
{
/* NOTE: we currently don't check the validity of the address! */
/* queue an ASCONF:SET_PRIM_ADDR to be sent */
if (!sctp_asconf_queue_add_sa(stcb, sa, SCTP_SET_PRIM_ADDR)) {
/* set primary queuing succeeded */
if (SCTP_GET_STATE(&stcb->asoc) == SCTP_STATE_OPEN) {
sctp_timer_start(SCTP_TIMER_TYPE_ASCONF,
stcb->sctp_ep, stcb,
stcb->asoc.primary_destination);
}
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("set_primary_ip_address_sa: queued on tcb=%p, ",
stcb);
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
} else {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("set_primary_ip_address_sa: failed to add to queue on tcb=%p, ",
stcb);
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
return (-1);
}
return (0);
}
void
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_set_primary_ip_address(struct sctp_ifa *ifa)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct sctp_inpcb *inp;
/* go through all our PCB's */
LIST_FOREACH(inp, &sctppcbinfo.listhead, sctp_list) {
struct sctp_tcb *stcb;
/* process for all associations for this endpoint */
LIST_FOREACH(stcb, &inp->sctp_asoc_list, sctp_tcblist) {
/* queue an ASCONF:SET_PRIM_ADDR to be sent */
if (!sctp_asconf_queue_add(stcb, ifa,
SCTP_SET_PRIM_ADDR)) {
/* set primary queuing succeeded */
if (SCTP_GET_STATE(&stcb->asoc) ==
SCTP_STATE_OPEN) {
sctp_timer_start(SCTP_TIMER_TYPE_ASCONF,
stcb->sctp_ep, stcb,
stcb->asoc.primary_destination);
}
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("set_primary_ip_address: queued on stcb=%p, ",
stcb);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_print_address(&ifa->address.sa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
#endif /* SCTP_DEBUG */
}
} /* for each stcb */
} /* for each inp */
}
static struct sockaddr *
sctp_find_valid_localaddr(struct sctp_tcb *stcb)
{
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_vrf *vrf = NULL;
struct sctp_ifn *sctp_ifn;
struct sctp_ifa *sctp_ifa;
vrf = sctp_find_vrf(stcb->asoc.vrf_id);
LIST_FOREACH(sctp_ifn, &vrf->ifnlist, next_ifn) {
if (stcb->asoc.loopback_scope == 0 &&
SCTP_IFN_IS_IFT_LOOP(sctp_ifn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* Skip if loopback_scope not set */
continue;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_FOREACH(sctp_ifa, &sctp_ifn->ifalist, next_ifa) {
if (sctp_ifa->address.sa.sa_family == AF_INET &&
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.ipv4_addr_legal) {
struct sockaddr_in *sin;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sin = (struct sockaddr_in *)&sctp_ifa->address.sa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (sin->sin_addr.s_addr == 0) {
/* skip unspecifed addresses */
continue;
}
if (stcb->asoc.ipv4_local_scope == 0 &&
IN4_ISPRIVATE_ADDRESS(&sin->sin_addr))
continue;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_is_addr_restricted(stcb, sctp_ifa))
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
/* found a valid local v4 address to use */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
return (&sctp_ifa->address.sa);
} else if (sctp_ifa->address.sa.sa_family == AF_INET6 &&
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
stcb->asoc.ipv6_addr_legal) {
struct sockaddr_in6 *sin6;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_ifa->localifa_flags & SCTP_ADDR_IFA_UNUSEABLE) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
sin6 = (struct sockaddr_in6 *)&sctp_ifa->address.sa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) {
/* we skip unspecifed addresses */
continue;
}
if (stcb->asoc.local_scope == 0 &&
IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr))
continue;
if (stcb->asoc.site_scope == 0 &&
IN6_IS_ADDR_SITELOCAL(&sin6->sin6_addr))
continue;
/* found a valid local v6 address to use */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
return (&sctp_ifa->address.sa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
}
/* no valid addresses found */
return (NULL);
}
static struct sockaddr *
sctp_find_valid_localaddr_ep(struct sctp_tcb *stcb)
{
struct sctp_laddr *laddr;
LIST_FOREACH(laddr, &stcb->sctp_ep->sctp_addr_list, sctp_nxt_addr) {
if (laddr->ifa == NULL) {
continue;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (laddr->ifa == NULL) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
/* is the address restricted ? */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_is_addr_restricted(stcb, laddr->ifa))
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
/* found a valid local address to use */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
return (&laddr->ifa->address.sa);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
/* no valid addresses found */
return (NULL);
}
/*
* builds an ASCONF chunk from queued ASCONF params returns NULL on error (no
* mbuf, no ASCONF params queued, etc)
*/
struct mbuf *
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
sctp_compose_asconf(struct sctp_tcb *stcb, int *retlen)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
struct mbuf *m_asconf, *m_asconf_chk;
struct sctp_asconf_addr *aa;
struct sctp_asconf_chunk *acp;
struct sctp_asconf_paramhdr *aph;
struct sctp_asconf_addr_param *aap;
uint32_t p_length;
uint32_t correlation_id = 1; /* 0 is reserved... */
caddr_t ptr, lookup_ptr;
uint8_t lookup_used = 0;
/* are there any asconf params to send? */
if (TAILQ_EMPTY(&stcb->asoc.asconf_queue)) {
return (NULL);
}
/*
* get a chunk header mbuf and a cluster for the asconf params since
* it's simpler to fill in the asconf chunk header lookup address on
* the fly
*/
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
m_asconf_chk = sctp_get_mbuf_for_msg(sizeof(struct sctp_asconf_chunk), 0, M_DONTWAIT, 1, MT_DATA);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (m_asconf_chk == NULL) {
/* no mbuf's */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1)
printf("compose_asconf: couldn't get chunk mbuf!\n");
#endif /* SCTP_DEBUG */
return (NULL);
}
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
m_asconf = sctp_get_mbuf_for_msg(MCLBYTES, 0, M_DONTWAIT, 1, MT_DATA);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (m_asconf == NULL) {
/* no mbuf's */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1)
printf("compose_asconf: couldn't get mbuf!\n");
#endif /* SCTP_DEBUG */
sctp_m_freem(m_asconf_chk);
return (NULL);
}
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_asconf_chk) = sizeof(struct sctp_asconf_chunk);
SCTP_BUF_LEN(m_asconf) = 0;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
acp = mtod(m_asconf_chk, struct sctp_asconf_chunk *);
bzero(acp, sizeof(struct sctp_asconf_chunk));
/* save pointers to lookup address and asconf params */
lookup_ptr = (caddr_t)(acp + 1); /* after the header */
ptr = mtod(m_asconf, caddr_t); /* beginning of cluster */
/* fill in chunk header info */
acp->ch.chunk_type = SCTP_ASCONF;
acp->ch.chunk_flags = 0;
acp->serial_number = htonl(stcb->asoc.asconf_seq_out);
/* add parameters... up to smallest MTU allowed */
TAILQ_FOREACH(aa, &stcb->asoc.asconf_queue, next) {
/* get the parameter length */
p_length = SCTP_SIZE32(aa->ap.aph.ph.param_length);
/* will it fit in current chunk? */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
if (SCTP_BUF_LEN(m_asconf) + p_length > stcb->asoc.smallest_mtu) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* won't fit, so we're done with this chunk */
break;
}
/* assign (and store) a correlation id */
aa->ap.aph.correlation_id = correlation_id++;
/*
* fill in address if we're doing a delete this is a simple
* way for us to fill in the correlation address, which
* should only be used by the peer if we're deleting our
* source address and adding a new address (e.g. renumbering
* case)
*/
if (lookup_used == 0 &&
aa->ap.aph.ph.param_type == SCTP_DEL_IP_ADDRESS) {
struct sctp_ipv6addr_param *lookup;
uint16_t p_size, addr_size;
lookup = (struct sctp_ipv6addr_param *)lookup_ptr;
lookup->ph.param_type =
htons(aa->ap.addrp.ph.param_type);
if (aa->ap.addrp.ph.param_type == SCTP_IPV6_ADDRESS) {
/* copy IPv6 address */
p_size = sizeof(struct sctp_ipv6addr_param);
addr_size = sizeof(struct in6_addr);
} else {
/* copy IPv4 address */
p_size = sizeof(struct sctp_ipv4addr_param);
addr_size = sizeof(struct in_addr);
}
lookup->ph.param_length = htons(SCTP_SIZE32(p_size));
memcpy(lookup->addr, &aa->ap.addrp.addr, addr_size);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_asconf_chk) += SCTP_SIZE32(p_size);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
lookup_used = 1;
}
/* copy into current space */
memcpy(ptr, &aa->ap, p_length);
/* network elements and update lengths */
aph = (struct sctp_asconf_paramhdr *)ptr;
aap = (struct sctp_asconf_addr_param *)ptr;
/* correlation_id is transparent to peer, no htonl needed */
aph->ph.param_type = htons(aph->ph.param_type);
aph->ph.param_length = htons(aph->ph.param_length);
aap->addrp.ph.param_type = htons(aap->addrp.ph.param_type);
aap->addrp.ph.param_length = htons(aap->addrp.ph.param_length);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_asconf) += SCTP_SIZE32(p_length);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
ptr += SCTP_SIZE32(p_length);
/*
* these params are removed off the pending list upon
* getting an ASCONF-ACK back from the peer, just set flag
*/
aa->sent = 1;
}
/* check to see if the lookup addr has been populated yet */
if (lookup_used == 0) {
/* NOTE: if the address param is optional, can skip this... */
/* add any valid (existing) address... */
struct sctp_ipv6addr_param *lookup;
uint16_t p_size, addr_size;
struct sockaddr *found_addr;
caddr_t addr_ptr;
if (stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL)
found_addr = sctp_find_valid_localaddr(stcb);
else
found_addr = sctp_find_valid_localaddr_ep(stcb);
lookup = (struct sctp_ipv6addr_param *)lookup_ptr;
if (found_addr != NULL) {
if (found_addr->sa_family == AF_INET6) {
/* copy IPv6 address */
lookup->ph.param_type =
htons(SCTP_IPV6_ADDRESS);
p_size = sizeof(struct sctp_ipv6addr_param);
addr_size = sizeof(struct in6_addr);
addr_ptr = (caddr_t)&((struct sockaddr_in6 *)
found_addr)->sin6_addr;
} else {
/* copy IPv4 address */
lookup->ph.param_type =
htons(SCTP_IPV4_ADDRESS);
p_size = sizeof(struct sctp_ipv4addr_param);
addr_size = sizeof(struct in_addr);
addr_ptr = (caddr_t)&((struct sockaddr_in *)
found_addr)->sin_addr;
}
lookup->ph.param_length = htons(SCTP_SIZE32(p_size));
memcpy(lookup->addr, addr_ptr, addr_size);
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_asconf_chk) += SCTP_SIZE32(p_size);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
lookup_used = 1;
} else {
/* uh oh... don't have any address?? */
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1)
printf("compose_asconf: no lookup addr!\n");
#endif /* SCTP_DEBUG */
/* for now, we send a IPv4 address of 0.0.0.0 */
lookup->ph.param_type = htons(SCTP_IPV4_ADDRESS);
lookup->ph.param_length = htons(SCTP_SIZE32(sizeof(struct sctp_ipv4addr_param)));
bzero(lookup->addr, sizeof(struct in_addr));
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_LEN(m_asconf_chk) += SCTP_SIZE32(sizeof(struct sctp_ipv4addr_param));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
lookup_used = 1;
}
}
/* chain it all together */
a) macro-ization of all mbuf and random number access plus timers. This makes the code more portable and able to change out the mbuf or timer system used more easily ;-) b) removal of all use of pkt-hdr's until only the places we need them (before ip_output routines). c) remove a bunch of code not needed due to <b> aka worrying about pkthdr's :-) d) There was one last reorder problem it looks where if a restart occur's and we release and relock (at the point where we setup our alias vtag) we would end up possibly getting the wrong TSN in place. The code that fixed the TSN's just needed to be shifted around BEFORE the release of the lock.. also code that set the state (since this also could contribute). Approved by: gnn
2006-12-29 20:21:42 +00:00
SCTP_BUF_NEXT(m_asconf_chk) = m_asconf;
*retlen = acp->ch.chunk_length = ntohs(SCTP_BUF_LEN(m_asconf_chk) + SCTP_BUF_LEN(m_asconf));
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* update "sent" flag */
stcb->asoc.asconf_sent++;
return (m_asconf_chk);
}
/*
* section to handle address changes before an association is up eg. changes
* during INIT/INIT-ACK/COOKIE-ECHO handshake
*/
/*
* processes the (local) addresses in the INIT-ACK chunk
*/
static void
sctp_process_initack_addresses(struct sctp_tcb *stcb, struct mbuf *m,
unsigned int offset, unsigned int length)
{
struct sctp_paramhdr tmp_param, *ph;
uint16_t plen, ptype;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *sctp_ifa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_ipv6addr_param addr_store;
struct sockaddr_in6 sin6;
struct sockaddr_in sin;
struct sockaddr *sa;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
uint32_t vrf_id;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF2) {
printf("processing init-ack addresses\n");
}
#endif /* SCTP_DEBUG */
/* convert to upper bound */
length += offset;
if ((offset + sizeof(struct sctp_paramhdr)) > length) {
return;
}
/* init the addresses */
bzero(&sin6, sizeof(sin6));
sin6.sin6_family = AF_INET6;
sin6.sin6_len = sizeof(sin6);
sin6.sin6_port = stcb->rport;
bzero(&sin, sizeof(sin));
sin.sin_len = sizeof(sin);
sin.sin_family = AF_INET;
sin.sin_port = stcb->rport;
/* go through the addresses in the init-ack */
ph = (struct sctp_paramhdr *)sctp_m_getptr(m, offset,
sizeof(struct sctp_paramhdr), (uint8_t *) & tmp_param);
while (ph != NULL) {
ptype = ntohs(ph->param_type);
plen = ntohs(ph->param_length);
if (ptype == SCTP_IPV6_ADDRESS) {
struct sctp_ipv6addr_param *a6p;
/* get the entire IPv6 address param */
a6p = (struct sctp_ipv6addr_param *)
sctp_m_getptr(m, offset,
sizeof(struct sctp_ipv6addr_param),
(uint8_t *) & addr_store);
if (plen != sizeof(struct sctp_ipv6addr_param) ||
a6p == NULL) {
return;
}
memcpy(&sin6.sin6_addr, a6p->addr,
sizeof(struct in6_addr));
sa = (struct sockaddr *)&sin6;
} else if (ptype == SCTP_IPV4_ADDRESS) {
struct sctp_ipv4addr_param *a4p;
/* get the entire IPv4 address param */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
a4p = (struct sctp_ipv4addr_param *)sctp_m_getptr(m, offset,
sizeof(struct sctp_ipv4addr_param),
(uint8_t *) & addr_store);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (plen != sizeof(struct sctp_ipv4addr_param) ||
a4p == NULL) {
return;
}
sin.sin_addr.s_addr = a4p->addr;
sa = (struct sockaddr *)&sin;
} else {
goto next_addr;
}
/* see if this address really (still) exists */
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
if (stcb) {
vrf_id = stcb->asoc.vrf_id;
} else {
vrf_id = SCTP_DEFAULT_VRFID;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifa = sctp_find_ifa_by_addr(sa, vrf_id, 0);
if (sctp_ifa == NULL) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* address doesn't exist anymore */
int status;
/* are ASCONFs allowed ? */
if ((sctp_is_feature_on(stcb->sctp_ep,
SCTP_PCB_FLAGS_DO_ASCONF)) &&
stcb->asoc.peer_supports_asconf) {
/* queue an ASCONF DEL_IP_ADDRESS */
status = sctp_asconf_queue_add_sa(stcb, sa,
SCTP_DEL_IP_ADDRESS);
/*
* if queued ok, and in correct state, set
* the ASCONF timer
*/
if (status == 0 &&
SCTP_GET_STATE(&stcb->asoc) ==
SCTP_STATE_OPEN) {
sctp_timer_start(SCTP_TIMER_TYPE_ASCONF,
stcb->sctp_ep, stcb,
stcb->asoc.primary_destination);
}
}
}
next_addr:
/*
* Sanity check: Make sure the length isn't 0, otherwise
* we'll be stuck in this loop for a long time...
*/
if (SCTP_SIZE32(plen) == 0) {
#ifdef SCTP_DEBUG
printf("process_initack_addrs: bad len (%d) type=%xh\n",
plen, ptype);
#endif
return;
}
/* get next parameter */
offset += SCTP_SIZE32(plen);
if ((offset + sizeof(struct sctp_paramhdr)) > length)
return;
ph = (struct sctp_paramhdr *)sctp_m_getptr(m, offset,
sizeof(struct sctp_paramhdr), (uint8_t *) & tmp_param);
} /* while */
}
/* FIX ME: need to verify return result for v6 address type if v6 disabled */
/*
* checks to see if a specific address is in the initack address list returns
* 1 if found, 0 if not
*/
static uint32_t
sctp_addr_in_initack(struct sctp_tcb *stcb, struct mbuf *m, uint32_t offset,
uint32_t length, struct sockaddr *sa)
{
struct sctp_paramhdr tmp_param, *ph;
uint16_t plen, ptype;
struct sctp_ipv6addr_param addr_store;
struct sockaddr_in *sin;
struct sctp_ipv4addr_param *a4p;
#ifdef INET6
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sockaddr_in6 *sin6;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
struct sctp_ipv6addr_param *a6p;
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sockaddr_in6 sin6_tmp;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#endif /* INET6 */
if (
#ifdef INET6
(sa->sa_family != AF_INET6) &&
#endif /* INET6 */
(sa->sa_family != AF_INET))
return (0);
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF2) {
printf("find_initack_addr: starting search for ");
sctp_print_address(sa);
}
#endif /* SCTP_DEBUG */
/* convert to upper bound */
length += offset;
if ((offset + sizeof(struct sctp_paramhdr)) > length) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("find_initack_addr: invalid offset?\n");
}
#endif /* SCTP_DEBUG */
return (0);
}
/* go through the addresses in the init-ack */
ph = (struct sctp_paramhdr *)sctp_m_getptr(m, offset,
sizeof(struct sctp_paramhdr), (uint8_t *) & tmp_param);
while (ph != NULL) {
ptype = ntohs(ph->param_type);
plen = ntohs(ph->param_length);
#ifdef INET6
if (ptype == SCTP_IPV6_ADDRESS && sa->sa_family == AF_INET6) {
/* get the entire IPv6 address param */
a6p = (struct sctp_ipv6addr_param *)
sctp_m_getptr(m, offset,
sizeof(struct sctp_ipv6addr_param),
(uint8_t *) & addr_store);
if (plen != sizeof(struct sctp_ipv6addr_param) ||
ph == NULL) {
return (0);
}
sin6 = (struct sockaddr_in6 *)sa;
if (IN6_IS_SCOPE_LINKLOCAL(&sin6->sin6_addr)) {
/* create a copy and clear scope */
memcpy(&sin6_tmp, sin6,
sizeof(struct sockaddr_in6));
sin6 = &sin6_tmp;
in6_clearscope(&sin6->sin6_addr);
}
if (memcmp(&sin6->sin6_addr, a6p->addr,
sizeof(struct in6_addr)) == 0) {
/* found it */
return (1);
}
} else
#endif /* INET6 */
if (ptype == SCTP_IPV4_ADDRESS &&
sa->sa_family == AF_INET) {
/* get the entire IPv4 address param */
a4p = (struct sctp_ipv4addr_param *)sctp_m_getptr(m,
offset, sizeof(struct sctp_ipv4addr_param),
(uint8_t *) & addr_store);
if (plen != sizeof(struct sctp_ipv4addr_param) ||
ph == NULL) {
return (0);
}
sin = (struct sockaddr_in *)sa;
if (sin->sin_addr.s_addr == a4p->addr) {
/* found it */
return (1);
}
}
/* get next parameter */
offset += SCTP_SIZE32(plen);
if (offset + sizeof(struct sctp_paramhdr) > length)
return (0);
ph = (struct sctp_paramhdr *)
sctp_m_getptr(m, offset, sizeof(struct sctp_paramhdr),
(uint8_t *) & tmp_param);
} /* while */
/* not found! */
return (0);
}
/*
* makes sure that the current endpoint local addr list is consistent with
* the new association (eg. subset bound, asconf allowed) adds addresses as
* necessary
*/
static void
sctp_check_address_list_ep(struct sctp_tcb *stcb, struct mbuf *m, int offset,
int length, struct sockaddr *init_addr)
{
struct sctp_laddr *laddr;
/* go through the endpoint list */
LIST_FOREACH(laddr, &stcb->sctp_ep->sctp_addr_list, sctp_nxt_addr) {
/* be paranoid and validate the laddr */
if (laddr->ifa == NULL) {
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("check_addr_list_ep: laddr->ifa is NULL");
}
#endif /* SCTP_DEBUG */
continue;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (laddr->ifa == NULL) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP_DEBUG
if (sctp_debug_on & SCTP_DEBUG_ASCONF1) {
printf("check_addr_list_ep: laddr->ifa->ifa_addr is NULL");
}
#endif /* SCTP_DEBUG */
continue;
}
/* do i have it implicitly? */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_cmpaddr(&laddr->ifa->address.sa, init_addr)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
/* check to see if in the init-ack */
if (!sctp_addr_in_initack(stcb, m, offset, length,
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
&laddr->ifa->address.sa)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* try to add it */
sctp_addr_mgmt_assoc(stcb->sctp_ep, stcb, laddr->ifa,
SCTP_ADD_IP_ADDRESS);
}
}
}
/*
* makes sure that the current kernel address list is consistent with the new
* association (with all addrs bound) adds addresses as necessary
*/
static void
sctp_check_address_list_all(struct sctp_tcb *stcb, struct mbuf *m, int offset,
int length, struct sockaddr *init_addr,
uint16_t local_scope, uint16_t site_scope,
uint16_t ipv4_scope, uint16_t loopback_scope)
{
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_vrf *vrf = NULL;
struct sctp_ifn *sctp_ifn;
struct sctp_ifa *sctp_ifa;
uint32_t vrf_id;
- fixed several places where we did not release INP locks. - fixed a refcount bug in the new ifa structures. - use vrf's from default stcb or inp whenever possible. - Address limits raised to account for a full IP fragmented packet (1000 addresses). - flight size correcting updated to include one message only and to handle case where the peer does not cumack the next segment aka lists 1/1 in sack blocks.. - Various bad init/init-ack handling could cause a panic since we tried to unlock the destroyed mutex. Fixes so we properly exit when we need to destroy an assoc. (Found by Cisco DevTest team :D) - name rename in src-addr-selection from pass to sifa. - route structure typedef'd to allow different platforms and updated into sctp_os_bsd file. - Max retransmissions a chunk can be made added. Reviewed by: gnn
2007-04-03 11:15:32 +00:00
if (stcb) {
vrf_id = stcb->asoc.vrf_id;
} else {
vrf_id = SCTP_DEFAULT_VRFID;
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
vrf = sctp_find_vrf(vrf_id);
if (vrf == NULL) {
return;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* go through all our known interfaces */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_FOREACH(sctp_ifn, &vrf->ifnlist, next_ifn) {
if (loopback_scope == 0 && SCTP_IFN_IS_IFT_LOOP(sctp_ifn)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* skip loopback interface */
continue;
}
/* go through each interface address */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_FOREACH(sctp_ifa, &sctp_ifn->ifalist, next_ifa) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* do i have it implicitly? */
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sctp_cmpaddr(&sctp_ifa->address.sa, init_addr)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
continue;
}
/* check to see if in the init-ack */
if (!sctp_addr_in_initack(stcb, m, offset, length,
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
&sctp_ifa->address.sa)) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
/* try to add it */
sctp_addr_mgmt_assoc(stcb->sctp_ep, stcb,
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_ifa, SCTP_ADD_IP_ADDRESS);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
} /* end foreach ifa */
} /* end foreach ifn */
}
/*
* validates an init-ack chunk (from a cookie-echo) with current addresses
* adds addresses from the init-ack into our local address list, if needed
* queues asconf adds/deletes addresses as needed and makes appropriate list
* changes for source address selection m, offset: points to the start of the
* address list in an init-ack chunk length: total length of the address
* params only init_addr: address where my INIT-ACK was sent from
*/
void
sctp_check_address_list(struct sctp_tcb *stcb, struct mbuf *m, int offset,
int length, struct sockaddr *init_addr,
uint16_t local_scope, uint16_t site_scope,
uint16_t ipv4_scope, uint16_t loopback_scope)
{
/* process the local addresses in the initack */
sctp_process_initack_addresses(stcb, m, offset, length);
if (stcb->sctp_ep->sctp_flags & SCTP_PCB_FLAGS_BOUNDALL) {
/* bound all case */
sctp_check_address_list_all(stcb, m, offset, length, init_addr,
local_scope, site_scope, ipv4_scope, loopback_scope);
} else {
/* subset bound case */
if (sctp_is_feature_on(stcb->sctp_ep,
SCTP_PCB_FLAGS_DO_ASCONF)) {
/* asconf's allowed */
sctp_check_address_list_ep(stcb, m, offset, length,
init_addr);
}
/* else, no asconfs allowed, so what we sent is what we get */
}
}
/*
* sctp_bindx() support
*/
uint32_t
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
sctp_addr_mgmt_ep_sa(struct sctp_inpcb *inp, struct sockaddr *sa, uint32_t type, uint32_t vrf_id)
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
{
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
struct sctp_ifa *ifa;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
if (sa->sa_len == 0) {
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
return (EINVAL);
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
}
if (type == SCTP_ADD_IP_ADDRESS) {
/* For an add the address MUST be on the system */
ifa = sctp_find_ifa_by_addr(sa, vrf_id, 0);
} else if (type == SCTP_DEL_IP_ADDRESS) {
/* For a delete we need to find it in the inp */
ifa = sctp_find_ifa_in_ep(inp, sa, 0);
} else {
ifa = NULL;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
if (ifa != NULL) {
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
/* add this address */
struct sctp_asconf_iterator *asc;
struct sctp_laddr *wi;
SCTP_MALLOC(asc, struct sctp_asconf_iterator *,
sizeof(struct sctp_asconf_iterator), "SCTP_ASCONF_ITERATOR");
if (asc == NULL) {
return (ENOMEM);
}
wi = SCTP_ZONE_GET(sctppcbinfo.ipi_zone_laddr, struct sctp_laddr);
if (wi == NULL) {
SCTP_FREE(asc);
return (ENOMEM);
}
if (type == SCTP_ADD_IP_ADDRESS) {
sctp_add_local_addr_ep(inp, ifa, type);
} else if (type == SCTP_DEL_IP_ADDRESS) {
struct sctp_laddr *laddr;
LIST_FOREACH(laddr, &inp->sctp_addr_list, sctp_nxt_addr) {
if (ifa == laddr->ifa) {
/* Mark in the delete */
laddr->action = type;
}
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
}
}
- Sysctl's move to seperate file - moved away from ifn/ifa access to sctp_ifa/sctp_ifn built and managed by the add-ip code. - cleaned up add-ip code to use the iterator - made iterator be a thread, which enables auto-asconf now. - rewrote and cleaned up source address selection (also made it use new structures). - Fixed a couple of memory leaks. - DACK now settable as to how many packets to delay as well as time. - connectx() to latest socket API, new associd arg. - Fixed issue with revoking and loosing potential to send when we inflate the flight size. We now inflate the cwnd too and deflate it later when the revoked chunk is sent or acked. - Got rid of some temp debug code - src addr selection moved to a common file (sctp_output.c) - Support for simple VRF's (we have support for multi-vfr via compile switch that is scrubbed from BSD but we won't need multi-vrf until we first get VRF :-D) - Rest of mib work for address information now done - Limit number of addresses in INIT/INIT-ACK to a #def (30). Reviewed by: gnn
2007-03-15 11:27:14 +00:00
LIST_INIT(&asc->list_of_work);
asc->cnt = 1;
SCTP_INCR_LADDR_COUNT();
wi->ifa = ifa;
wi->action = type;
atomic_add_int(&ifa->refcount, 1);
LIST_INSERT_HEAD(&asc->list_of_work, wi, sctp_nxt_addr);
sctp_initiate_iterator(sctp_iterator_ep,
sctp_iterator_stcb,
sctp_iterator_ep_end,
SCTP_PCB_ANY_FLAGS,
SCTP_PCB_ANY_FEATURES, SCTP_ASOC_ANY_STATE, (void *)asc, 0,
sctp_iterator_end, inp, 0);
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
} else {
/* invalid address! */
return (EADDRNOTAVAIL);
}
return (0);
}
Reference in New Issue Copy Permalink