freebsd-skq/sys/net80211/ieee80211_scan.h

220 lines
8.5 KiB
C
Raw Normal View History

Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
/*-
* Copyright (c) 2005-2007 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_SCAN_H_
#define _NET80211_IEEE80211_SCAN_H_
#define IEEE80211_SCAN_MAX IEEE80211_CHAN_MAX
struct ieee80211_scanner;
struct ieee80211_scan_ssid {
int len; /* length in bytes */
uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */
};
#define IEEE80211_SCAN_MAX_SSID 1
struct ieee80211_scan_state {
struct ieee80211com *ss_ic;
const struct ieee80211_scanner *ss_ops; /* policy hookup, see below */
void *ss_priv; /* scanner private state */
uint16_t ss_flags;
#define IEEE80211_SCAN_NOPICK 0x0001 /* scan only, no selection */
#define IEEE80211_SCAN_ACTIVE 0x0002 /* active scan (probe req) */
#define IEEE80211_SCAN_PICK1ST 0x0004 /* ``hey sailor'' mode */
#define IEEE80211_SCAN_BGSCAN 0x0008 /* bg scan, exit ps at end */
#define IEEE80211_SCAN_ONCE 0x0010 /* do one complete pass */
#define IEEE80211_SCAN_GOTPICK 0x1000 /* got candidate, can stop */
uint8_t ss_nssid; /* # ssid's to probe/match */
struct ieee80211_scan_ssid ss_ssid[IEEE80211_SCAN_MAX_SSID];
/* ssid's to probe/match */
/* ordered channel set */
struct ieee80211_channel *ss_chans[IEEE80211_SCAN_MAX];
uint16_t ss_next; /* ix of next chan to scan */
uint16_t ss_last; /* ix+1 of last chan to scan */
unsigned long ss_mindwell; /* min dwell on channel */
unsigned long ss_maxdwell; /* max dwell on channel */
};
/*
* The upper 16 bits of the flags word is used to communicate
* information to the scanning code that is NOT recorded in
* ss_flags. It might be better to split this stuff out into
* a separate variable to avoid confusion.
*/
#define IEEE80211_SCAN_FLUSH 0x10000 /* flush candidate table */
#define IEEE80211_SCAN_NOSSID 0x20000 /* don't update ssid list */
struct ieee80211com;
void ieee80211_scan_attach(struct ieee80211com *);
void ieee80211_scan_detach(struct ieee80211com *);
void ieee80211_scan_dump_channels(const struct ieee80211_scan_state *);
int ieee80211_scan_update(struct ieee80211com *);
#define IEEE80211_SCAN_FOREVER 0x7fffffff
int ieee80211_start_scan(struct ieee80211com *, int flags, u_int duration,
u_int nssid, const struct ieee80211_scan_ssid ssids[]);
int ieee80211_check_scan(struct ieee80211com *, int flags, u_int duration,
u_int nssid, const struct ieee80211_scan_ssid ssids[]);
int ieee80211_bg_scan(struct ieee80211com *);
void ieee80211_cancel_scan(struct ieee80211com *);
void ieee80211_scan_next(struct ieee80211com *);
void ieee80211_scan_done(struct ieee80211com *);
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
struct ieee80211_scanparams;
void ieee80211_add_scan(struct ieee80211com *,
const struct ieee80211_scanparams *,
const struct ieee80211_frame *,
int subtype, int rssi, int noise, int rstamp);
void ieee80211_scan_timeout(struct ieee80211com *);
void ieee80211_scan_assoc_success(struct ieee80211com *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
enum {
IEEE80211_SCAN_FAIL_TIMEOUT = 1, /* no response to mgmt frame */
IEEE80211_SCAN_FAIL_STATUS = 2 /* negative response to " " */
};
void ieee80211_scan_assoc_fail(struct ieee80211com *,
const uint8_t mac[IEEE80211_ADDR_LEN], int reason);
void ieee80211_scan_flush(struct ieee80211com *);
struct ieee80211_scan_entry;
typedef void ieee80211_scan_iter_func(void *,
const struct ieee80211_scan_entry *);
void ieee80211_scan_iterate(struct ieee80211com *,
ieee80211_scan_iter_func, void *);
/*
* Parameters supplied when adding/updating an entry in a
* scan cache. Pointer variables should be set to NULL
* if no data is available. Pointer references can be to
* local data; any information that is saved will be copied.
* All multi-byte values must be in host byte order.
*/
struct ieee80211_scanparams {
uint16_t capinfo; /* 802.11 capabilities */
uint16_t fhdwell; /* FHSS dwell interval */
struct ieee80211_channel *curchan;
uint8_t bchan; /* chan# advertised inside beacon */
Update 802.11 wireless support: o major overhaul of the way channels are handled: channels are now fully enumerated and uniquely identify the operating characteristics; these changes are visible to user applications which require changes o make scanning support independent of the state machine to enable background scanning and roaming o move scanning support into loadable modules based on the operating mode to enable different policies and reduce the memory footprint on systems w/ constrained resources o add background scanning in station mode (no support for adhoc/ibss mode yet) o significantly speedup sta mode scanning with a variety of techniques o add roaming support when background scanning is supported; for now we use a simple algorithm to trigger a roam: we threshold the rssi and tx rate, if either drops too low we try to roam to a new ap o add tx fragmentation support o add first cut at 802.11n support: this code works with forthcoming drivers but is incomplete; it's included now to establish a baseline for other drivers to be developed and for user applications o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates prepending mbufs for traffic generated locally o add support for Atheros protocol extensions; mainly the fast frames encapsulation (note this can be used with any card that can tx+rx large frames correctly) o add sta support for ap's that beacon both WPA1+2 support o change all data types from bsd-style to posix-style o propagate noise floor data from drivers to net80211 and on to user apps o correct various issues in the sta mode state machine related to handling authentication and association failures o enable the addition of sta mode power save support for drivers that need net80211 support (not in this commit) o remove old WI compatibility ioctls (wicontrol is officially dead) o change the data structures returned for get sta info and get scan results so future additions will not break user apps o fixed tx rate is now maintained internally as an ieee rate and not an index into the rate set; this needs to be extended to deal with multi-mode operation o add extended channel specifications to radiotap to enable 11n sniffing Drivers: o ath: add support for bg scanning, tx fragmentation, fast frames, dynamic turbo (lightly tested), 11n (sniffing only and needs new hal) o awi: compile tested only o ndis: lightly tested o ipw: lightly tested o iwi: add support for bg scanning (well tested but may have some rough edges) o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data o wi: lightly tested This work is based on contributions by Atheros, kmacy, sephe, thompsa, mlaier, kevlo, and others. Much of the scanning work was supported by Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
uint8_t fhindex;
uint8_t erp;
uint16_t bintval;
uint8_t timoff;
uint8_t *tim;
uint8_t *tstamp;
uint8_t *country;
uint8_t *ssid;
uint8_t *rates;
uint8_t *xrates;
uint8_t *doth;
uint8_t *wpa;
uint8_t *rsn;
uint8_t *wme;
uint8_t *htcap;
uint8_t *htinfo;
uint8_t *ath;
};
/*
* Scan cache entry format used when exporting data from a policy
* module; this data may be represented some other way internally.
*/
struct ieee80211_scan_entry {
uint8_t se_macaddr[IEEE80211_ADDR_LEN];
uint8_t se_bssid[IEEE80211_ADDR_LEN];
uint8_t se_ssid[2+IEEE80211_NWID_LEN];
uint8_t se_rates[2+IEEE80211_RATE_MAXSIZE];
uint8_t se_xrates[2+IEEE80211_RATE_MAXSIZE];
uint32_t se_rstamp; /* recv timestamp */
union {
uint8_t data[8];
uint64_t tsf;
} se_tstamp; /* from last rcv'd beacon */
uint16_t se_intval; /* beacon interval (host byte order) */
uint16_t se_capinfo; /* capabilities (host byte order) */
struct ieee80211_channel *se_chan;/* channel where sta found */
uint16_t se_timoff; /* byte offset to TIM ie */
uint16_t se_fhdwell; /* FH only (host byte order) */
uint8_t se_fhindex; /* FH only */
uint8_t se_erp; /* ERP from beacon/probe resp */
int8_t se_rssi; /* avg'd recv ssi */
int8_t se_noise; /* noise floor */
uint8_t se_dtimperiod; /* DTIM period */
uint8_t *se_wpa_ie; /* captured WPA ie */
uint8_t *se_rsn_ie; /* captured RSN ie */
uint8_t *se_wme_ie; /* captured WME ie */
uint8_t *se_htcap_ie; /* captured HTP cap ie */
uint8_t *se_htinfo_ie; /* captured HTP info ie */
uint8_t *se_ath_ie; /* captured Atheros ie */
u_int se_age; /* age of entry (0 on create) */
};
MALLOC_DECLARE(M_80211_SCAN);
/*
* Template for an in-kernel scan policy module.
* Modules register with the scanning code and are
* typically loaded as needed.
*/
struct ieee80211_scanner {
const char *scan_name; /* printable name */
int (*scan_attach)(struct ieee80211_scan_state *);
int (*scan_detach)(struct ieee80211_scan_state *);
int (*scan_start)(struct ieee80211_scan_state *,
struct ieee80211com *);
int (*scan_restart)(struct ieee80211_scan_state *,
struct ieee80211com *);
int (*scan_cancel)(struct ieee80211_scan_state *,
struct ieee80211com *);
int (*scan_end)(struct ieee80211_scan_state *,
struct ieee80211com *);
int (*scan_flush)(struct ieee80211_scan_state *);
/* add an entry to the cache */
int (*scan_add)(struct ieee80211_scan_state *,
const struct ieee80211_scanparams *,
const struct ieee80211_frame *,
int subtype, int rssi, int noise, int rstamp);
/* age and/or purge entries in the cache */
void (*scan_age)(struct ieee80211_scan_state *);
/* note that association failed for an entry */
void (*scan_assoc_fail)(struct ieee80211_scan_state *,
const uint8_t macaddr[IEEE80211_ADDR_LEN],
int reason);
/* note that association succeed for an entry */
void (*scan_assoc_success)(struct ieee80211_scan_state *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
/* iterate over entries in the scan cache */
void (*scan_iterate)(struct ieee80211_scan_state *,
ieee80211_scan_iter_func *, void *);
};
void ieee80211_scanner_register(enum ieee80211_opmode,
const struct ieee80211_scanner *);
void ieee80211_scanner_unregister(enum ieee80211_opmode,
const struct ieee80211_scanner *);
void ieee80211_scanner_unregister_all(const struct ieee80211_scanner *);
const struct ieee80211_scanner *ieee80211_scanner_get(enum ieee80211_opmode);
#endif /* _NET80211_IEEE80211_SCAN_H_ */