freebsd-skq/sys/conf/files.i386

274 lines
12 KiB
Plaintext
Raw Normal View History

1993-08-21 22:24:24 +00:00
# This file tells config what files go into building a kernel,
# files marked standard are always included.
1993-06-12 14:58:17 +00:00
#
# $Id: files.i386,v 1.141 1996/10/17 19:31:45 bde Exp $
1993-06-12 14:58:17 +00:00
#
aic7xxx_asm optional ahc device-driver \
dependency "$S/dev/aic7xxx/aic7xxx_asm.c" \
compile-with "${CC} -Wall -o $@ $>" \
no-obj no-implicit-rule \
1995-07-22 23:53:30 +00:00
clean "aic7xxx_asm"
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
#
aic7xxx_seq.h optional ahc device-driver \
compile-with "./aic7xxx_asm -o $@ $S/dev/aic7xxx/aic7xxx.seq" \
no-obj no-implicit-rule before-depend \
clean "aic7xxx_seq.h" \
dependency "$S/dev/aic7xxx/aic7xxx_reg.h $S/dev/aic7xxx/aic7xxx.seq aic7xxx_asm"
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
#
linux_genassym optional compat_linux \
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
dependency "$S/i386/linux/linux_genassym.c $S/i386/linux/linux.h" \
compile-with "${CC} ${CFLAGS} -o $@ $<" \
no-obj no-implicit-rule \
clean "linux_genassym"
#
linux_assym.h optional compat_linux \
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
dependency "linux_genassym" \
compile-with "./linux_genassym > $@" \
no-obj no-implicit-rule before-depend \
clean "linux_assym.h"
#
i386/scsi/93cx6.c optional ahc device-driver
i386/apm/apm.c optional apm device-driver
i386/apm/apm_setup.s optional apm
i386/eisa/3c5x9.c optional ep device-driver
i386/eisa/aic7770.c optional ahc device-driver
i386/eisa/aha1742.c optional ahb device-driver
i386/eisa/bt74x.c optional bt device-driver
i386/eisa/eisaconf.c optional eisa
i386/eisa/if_vx_eisa.c optional vx device-driver
i386/i386/autoconf.c standard device-driver
1993-06-12 14:58:17 +00:00
i386/i386/cons.c standard
i386/i386/db_disasm.c optional ddb
i386/i386/db_interface.c optional ddb
i386/i386/db_trace.c optional ddb
i386/i386/i386-gdbstub.c optional ddb
i386/i386/exception.s standard
i386/i386/identcpu.c standard
1993-06-12 14:58:17 +00:00
i386/i386/in_cksum.c optional inet
# locore.s needs to be handled in Makefile to put it first. Otherwise it's
# now normal.
# i386/i386/locore.s standard
i386/i386/machdep.c standard
i386/i386/math_emulate.c optional math_emulate
1993-06-12 14:58:17 +00:00
i386/i386/mem.c standard
i386/i386/microtime.s standard
Improved non-statistical (GUPROF) profiling: - use a more accurate and more efficient method of compensating for overheads. The old method counted too much time against leaf functions. - normally use the Pentium timestamp counter if available. On Pentiums, the times are now accurate to within a couple of cpu clock cycles per function call in the (unlikely) event that there are no cache misses in or caused by the profiling code. - optionally use an arbitrary Pentium event counter if available. - optionally regress to using the i8254 counter. - scaled the i8254 counter by a factor of 128. Now the i8254 counters overflow slightly faster than the TSC counters for a 150MHz Pentium :-) (after about 16 seconds). This is to avoid fractional overheads. files.i386: permon.c temporarily has to be classified as a profiling-routine because a couple of functions in it may be called from profiling code. options.i386: - I586_CTR_GUPROF is currently unused (oops). - I586_PMC_GUPROF should be something like 0x70000 to enable (but not use unless prof_machdep.c is changed) support for Pentium event counters. 7 is a control mode and the counter number 0 is somewhere in the 0000 bits (see perfmon.h for the encoding). profile.h: - added declarations. - cleaned up separation of user mode declarations. prof_machdep.c: Mostly clock-select changes. The default clock can be changed by editing kmem. There should be a sysctl for this. subr_prof.c: - added copyright. - calibrate overheads for the new method. - documented new method. - fixed races and and machine dependencies in start/stop code. mcount.c: Use the new overhead compensation method. gmon.h: - changed GPROF4 counter type from unsigned to int. Oops, this should be machine-dependent and/or int32_t. - reorganized overhead counters. Submitted by: Pentium event counter changes mostly by wollman
1996-10-17 19:32:31 +00:00
i386/i386/perfmon.c optional perfmon profiling-routine
i386/i386/perfmon.c optional perfmon
1993-06-12 14:58:17 +00:00
i386/i386/pmap.c standard
i386/i386/procfs_machdep.c standard
i386/i386/support.s standard
i386/i386/swtch.s standard
1993-06-12 14:58:17 +00:00
i386/i386/sys_machdep.c standard
i386/i386/trap.c standard
i386/i386/userconfig.c optional userconfig
1993-06-12 14:58:17 +00:00
i386/i386/vm_machdep.c standard
i386/ibcs2/ibcs2_fcntl.c optional ibcs2
i386/ibcs2/ibcs2_stat.c optional ibcs2
i386/ibcs2/ibcs2_ipc.c optional ibcs2
i386/ibcs2/ibcs2_msg.c optional ibcs2
i386/ibcs2/ibcs2_misc.c optional ibcs2
i386/ibcs2/ibcs2_other.c optional ibcs2
i386/ibcs2/ibcs2_signal.c optional ibcs2
i386/ibcs2/ibcs2_ioctl.c optional ibcs2
i386/ibcs2/ibcs2_socksys.c optional ibcs2
i386/ibcs2/ibcs2_sysi86.c optional ibcs2
i386/ibcs2/ibcs2_util.c optional ibcs2
i386/ibcs2/ibcs2_isc.c optional ibcs2
i386/ibcs2/ibcs2_isc_sysent.c optional ibcs2
i386/ibcs2/ibcs2_xenix.c optional ibcs2
i386/ibcs2/ibcs2_xenix_sysent.c optional ibcs2
i386/ibcs2/ibcs2_errno.c optional ibcs2
i386/ibcs2/ibcs2_sysent.c optional ibcs2
i386/ibcs2/ibcs2_sysvec.c optional ibcs2
i386/ibcs2/imgact_coff.c optional ibcs2
1993-06-12 14:58:17 +00:00
i386/isa/aha1542.c optional aha device-driver
i386/isa/aic6360.c optional aic device-driver
i386/isa/b004.c optional bqu device-driver
i386/isa/bt5xx-445.c optional bt device-driver
1993-06-12 14:58:17 +00:00
i386/isa/clock.c standard
i386/isa/cronyx.c optional cx device-driver
i386/isa/ctx.c optional ctx device-driver
i386/isa/cx.c optional cx device-driver
i386/isa/cy.c optional cy device-driver
i386/isa/diskslice_machdep.c standard
i386/isa/elink.c optional ep device-driver
i386/isa/elink.c optional ie device-driver
1993-06-12 14:58:17 +00:00
i386/isa/fd.c optional fd device-driver
1994-02-07 04:27:59 +00:00
i386/isa/ft.c optional ft device-driver
i386/isa/gpib.c optional gp device-driver
i386/isa/asc.c optional asc device-driver
i386/isa/gsc.c optional gsc device-driver
i386/isa/if_ar.c optional ar device-driver
i386/isa/if_cx.c optional cx device-driver
1993-06-12 14:58:17 +00:00
i386/isa/if_ed.c optional ed device-driver
i386/isa/if_eg.c optional eg device-driver
i386/isa/if_el.c optional el device-driver
i386/isa/if_ep.c optional ep device-driver
i386/isa/if_fe.c optional fe device-driver
i386/isa/if_ie.c optional ie device-driver
1993-06-12 14:58:17 +00:00
i386/isa/if_ix.c optional ix device-driver
i386/isa/if_le.c optional le device-driver
i386/isa/if_lnc.c optional lnc device-driver
i386/isa/if_sr.c optional sr device-driver
i386/isa/if_ze.c optional ze device-driver
i386/isa/if_zp.c optional zp device-driver
1993-06-12 14:58:17 +00:00
i386/isa/isa.c optional isa device-driver
i386/isa/istallion.c optional stli device-driver
1995-01-25 21:04:15 +00:00
i386/isa/joy.c optional joy device-driver
1993-06-12 14:58:17 +00:00
i386/isa/lpt.c optional lpt device-driver
i386/isa/labpc.c optional labpc device-driver
i386/isa/mcd.c optional mcd device-driver
1993-06-12 14:58:17 +00:00
i386/isa/mse.c optional mse device-driver
i386/isa/ncr5380.c optional nca device-driver
1993-06-12 14:58:17 +00:00
i386/isa/npx.c optional npx device-driver
1994-04-21 14:13:43 +00:00
i386/isa/pcaudio.c optional pca device-driver
i386/isa/matcd/matcd.c optional matcd device-driver
i386/isa/pcibus.c optional pci device-driver
i386/isa/pcicx.c optional ze device-driver
i386/isa/pcicx.c optional zp device-driver
i386/isa/pcvt/pcvt_drv.c optional vt device-driver
i386/isa/pcvt/pcvt_ext.c optional vt device-driver
i386/isa/pcvt/pcvt_kbd.c optional vt device-driver
i386/isa/pcvt/pcvt_out.c optional vt device-driver
i386/isa/pcvt/pcvt_sup.c optional vt device-driver
i386/isa/pcvt/pcvt_vtf.c optional vt device-driver
i386/isa/prof_machdep.c optional profiling-routine
i386/isa/psm.c optional psm device-driver
1996-02-02 06:55:35 +00:00
i386/isa/qcam.c optional qcam device-driver
i386/isa/qcamio.c optional qcam device-driver
i386/isa/random_machdep.c standard
1995-03-27 19:39:58 +00:00
i386/isa/rc.c optional rc device-driver
1995-03-24 18:30:11 +00:00
i386/isa/scd.c optional scd device-driver
i386/isa/seagate.c optional sea device-driver
i386/isa/si.c optional si device-driver
i386/isa/si_code.c optional si device-driver
1993-06-12 14:58:17 +00:00
i386/isa/sio.c optional sio device-driver
i386/isa/sound/dev_table.c optional snd device-driver
i386/isa/sound/soundcard.c optional snd device-driver
i386/isa/sound/sound_switch.c optional snd device-driver
i386/isa/sound/audio.c optional snd device-driver
i386/isa/sound/dmabuf.c optional snd device-driver
i386/isa/sound/sys_timer.c optional snd device-driver
i386/isa/sound/sequencer.c optional snd device-driver
i386/isa/sound/patmgr.c optional snd device-driver
i386/isa/sound/adlib_card.c optional opl device-driver
i386/isa/sound/opl3.c optional opl device-driver
i386/isa/sound/gus_card.c optional gus device-driver
i386/isa/sound/gus_midi.c optional gus device-driver
i386/isa/sound/gus_vol.c optional gus device-driver
i386/isa/sound/gus_wave.c optional gus device-driver
i386/isa/sound/ics2101.c optional gus device-driver
i386/isa/sound/sound_timer.c optional gus device-driver
i386/isa/sound/midi_synth.c optional gus device-driver
i386/isa/sound/midibuf.c optional gus device-driver
i386/isa/sound/ad1848.c optional gusxvi device-driver
i386/isa/sound/ad1848.c optional gus device-driver
i386/isa/sound/ad1848.c optional mss device-driver
i386/isa/sound/midi_synth.c optional mss device-driver
i386/isa/sound/midibuf.c optional mss device-driver
i386/isa/sound/mpu401.c optional mpu device-driver
i386/isa/sound/midi_synth.c optional mpu device-driver
i386/isa/sound/midibuf.c optional mpu device-driver
i386/isa/sound/pas2_card.c optional pas device-driver
i386/isa/sound/pas2_midi.c optional pas device-driver
i386/isa/sound/pas2_mixer.c optional pas device-driver
i386/isa/sound/pas2_pcm.c optional pas device-driver
i386/isa/sound/midi_synth.c optional pas device-driver
i386/isa/sound/midibuf.c optional pas device-driver
i386/isa/sound/sb_card.c optional sb device-driver
i386/isa/sound/sb_dsp.c optional sb device-driver
i386/isa/sound/sb_midi.c optional sb device-driver
i386/isa/sound/sb_mixer.c optional sb device-driver
i386/isa/sound/midi_synth.c optional sb device-driver
i386/isa/sound/midibuf.c optional sb device-driver
i386/isa/sound/sb16_dsp.c optional sbxvi device-driver
i386/isa/sound/sb16_midi.c optional sbmidi device-driver
i386/isa/sound/uart6850.c optional uart device-driver
i386/isa/sound/midi_synth.c optional uart device-driver
i386/isa/sound/midibuf.c optional uart device-driver
i386/isa/sound/trix.c optional trix device-driver
i386/isa/sound/sscape.c optional sscape device-driver
i386/isa/spigot.c optional spigot device-driver
i386/isa/spkr.c optional speaker device-driver
i386/isa/stallion.c optional stl device-driver
i386/isa/syscons.c optional sc device-driver
i386/isa/tw.c optional tw device-driver
i386/isa/ultra14f.c optional uha device-driver
i386/isa/wd.c optional wdc device-driver
i386/isa/wd.c optional wd device-driver
i386/isa/atapi.c optional atapi device-driver
i386/isa/wcd.c optional wcd device-driver
i386/isa/wd7000.c optional wds device-driver
i386/isa/wt.c optional wt device-driver
i386/linux/imgact_linux.c optional compat_linux
i386/linux/linux_dummy.c optional compat_linux
i386/linux/linux_file.c optional compat_linux
i386/linux/linux_ioctl.c optional compat_linux
i386/linux/linux_ipc.c optional compat_linux
i386/linux/linux_locore.s optional compat_linux \
dependency "linux_assym.h"
i386/linux/linux_misc.c optional compat_linux
i386/linux/linux_signal.c optional compat_linux
i386/linux/linux_socket.c optional compat_linux
i386/linux/linux_stats.c optional compat_linux
i386/linux/linux_sysent.c optional compat_linux
i386/linux/linux_sysvec.c optional compat_linux
i386/linux/linux_util.c optional compat_linux
i386/scsi/aic7xxx.c optional ahc device-driver \
dependency "$S/dev/aic7xxx/aic7xxx_reg.h aic7xxx_seq.h"
i386/scsi/bt.c optional bt device-driver
libkern/bcd.c standard
libkern/divdi3.c standard
libkern/inet_ntoa.c standard
libkern/index.c standard
libkern/mcount.c optional profiling-routine
libkern/moddi3.c standard
libkern/qdivrem.c standard
libkern/qsort.c standard
libkern/random.c standard
libkern/scanc.c standard
libkern/skpc.c standard
libkern/strcat.c standard
libkern/strcmp.c standard
libkern/strcpy.c standard
libkern/strlen.c standard
libkern/strncmp.c standard
libkern/strncpy.c standard
libkern/udivdi3.c standard
libkern/umoddi3.c standard
gnu/i386/fpemul/div_small.s optional gpl_math_emulate
gnu/i386/fpemul/errors.c optional gpl_math_emulate
gnu/i386/fpemul/fpu_arith.c optional gpl_math_emulate
gnu/i386/fpemul/fpu_aux.c optional gpl_math_emulate
gnu/i386/fpemul/fpu_entry.c optional gpl_math_emulate
gnu/i386/fpemul/fpu_etc.c optional gpl_math_emulate
gnu/i386/fpemul/fpu_trig.c optional gpl_math_emulate
gnu/i386/fpemul/get_address.c optional gpl_math_emulate
gnu/i386/fpemul/load_store.c optional gpl_math_emulate
gnu/i386/fpemul/poly_2xm1.c optional gpl_math_emulate
gnu/i386/fpemul/poly_atan.c optional gpl_math_emulate
gnu/i386/fpemul/poly_div.s optional gpl_math_emulate
gnu/i386/fpemul/poly_l2.c optional gpl_math_emulate
gnu/i386/fpemul/poly_mul64.s optional gpl_math_emulate
gnu/i386/fpemul/poly_sin.c optional gpl_math_emulate
gnu/i386/fpemul/poly_tan.c optional gpl_math_emulate
gnu/i386/fpemul/polynomial.s optional gpl_math_emulate
gnu/i386/fpemul/reg_add_sub.c optional gpl_math_emulate
gnu/i386/fpemul/reg_compare.c optional gpl_math_emulate
gnu/i386/fpemul/reg_constant.c optional gpl_math_emulate
gnu/i386/fpemul/reg_div.s optional gpl_math_emulate
gnu/i386/fpemul/reg_ld_str.c optional gpl_math_emulate
gnu/i386/fpemul/reg_mul.c optional gpl_math_emulate
gnu/i386/fpemul/reg_norm.s optional gpl_math_emulate
gnu/i386/fpemul/reg_round.s optional gpl_math_emulate
gnu/i386/fpemul/reg_u_add.s optional gpl_math_emulate
gnu/i386/fpemul/reg_u_div.s optional gpl_math_emulate
gnu/i386/fpemul/reg_u_mul.s optional gpl_math_emulate
gnu/i386/fpemul/reg_u_sub.s optional gpl_math_emulate
gnu/i386/fpemul/wm_shrx.s optional gpl_math_emulate
gnu/i386/fpemul/wm_sqrt.s optional gpl_math_emulate
gnu/i386/isa/dgb.c optional dgb device-driver
gnu/i386/isa/nic3008.c optional nic device-driver
gnu/i386/isa/nic3009.c optional nnic device-driver
pci/wd82371.c optional wd device-driver