freebsd-skq/sys/netinet/tcp_var.h

886 lines
34 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1982, 1986, 1993, 1994, 1995
1994-05-24 10:09:53 +00:00
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)tcp_var.h 8.4 (Berkeley) 5/24/95
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1994-05-24 10:09:53 +00:00
*/
1994-08-21 05:27:42 +00:00
#ifndef _NETINET_TCP_VAR_H_
#define _NETINET_TCP_VAR_H_
#include <netinet/tcp.h>
#include <netinet/tcp_fsm.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#ifdef _KERNEL
#include <net/vnet.h>
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
#include <sys/mbuf.h>
Permit buiding kernels with options VIMAGE, restricted to only a single active network stack instance. Turning on options VIMAGE at compile time yields the following changes relative to default kernel build: 1) V_ accessor macros for virtualized variables resolve to structure fields via base pointers, instead of being resolved as fields in global structs or plain global variables. As an example, V_ifnet becomes: options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet default build: vnet_net_0._ifnet options VIMAGE_GLOBALS: ifnet 2) INIT_VNET_* macros will declare and set up base pointers to be used by V_ accessor macros, instead of resolving to whitespace: INIT_VNET_NET(ifp->if_vnet); becomes struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET]; 3) Memory for vnet modules registered via vnet_mod_register() is now allocated at run time in sys/kern/kern_vimage.c, instead of per vnet module structs being declared as globals. If required, vnet modules can now request the framework to provide them with allocated bzeroed memory by filling in the vmi_size field in their vmi_modinfo structures. 4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are extended to hold a pointer to the parent vnet. options VIMAGE builds will fill in those fields as required. 5) curvnet is introduced as a new global variable in options VIMAGE builds, always pointing to the default and only struct vnet. 6) struct sysctl_oid has been extended with additional two fields to store major and minor virtualization module identifiers, oid_v_subs and oid_v_mod. SYSCTL_V_* family of macros will fill in those fields accordingly, and store the offset in the appropriate vnet container struct in oid_arg1. In sysctl handlers dealing with virtualized sysctls, the SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target variable and make it available in arg1 variable for further processing. Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have been deleted. Reviewed by: bz, rwatson Approved by: julian (mentor)
2009-04-30 13:36:26 +00:00
1994-05-24 10:09:53 +00:00
/*
* Kernel variables for tcp.
*/
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, tcp_do_rfc1323);
#define V_tcp_do_rfc1323 VNET(tcp_do_rfc1323)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#endif /* _KERNEL */
1994-05-24 10:09:53 +00:00
/* TCP segment queue entry */
struct tseg_qent {
LIST_ENTRY(tseg_qent) tqe_q;
int tqe_len; /* TCP segment data length */
struct tcphdr *tqe_th; /* a pointer to tcp header */
struct mbuf *tqe_m; /* mbuf contains packet */
};
LIST_HEAD(tsegqe_head, tseg_qent);
struct sackblk {
tcp_seq start; /* start seq no. of sack block */
2004-06-25 02:29:58 +00:00
tcp_seq end; /* end seq no. */
};
struct sackhole {
tcp_seq start; /* start seq no. of hole */
tcp_seq end; /* end seq no. */
tcp_seq rxmit; /* next seq. no in hole to be retransmitted */
TAILQ_ENTRY(sackhole) scblink; /* scoreboard linkage */
};
2004-06-25 02:29:58 +00:00
struct sackhint {
struct sackhole *nexthole;
int sack_bytes_rexmit;
tcp_seq last_sack_ack; /* Most recent/largest sacked ack */
int ispare; /* explicit pad for 64bit alignment */
Calculate the correct amount of bytes that are in-flight for a connection as suggested by RFC 6675. Currently differnt places in the stack tries to guess this in suboptimal ways. The main problem is that current calculations don't take sacked bytes into account. Sacked bytes are the bytes receiver acked via SACK option. This is suboptimal because it assumes that network has more outstanding (unacked) bytes than the actual value and thus sends less data by setting congestion window lower than what's possible which in turn may cause slower recovery from losses. As an example, one of the current calculations looks something like this: snd_nxt - snd_fack + sackhint.sack_bytes_rexmit New proposal from RFC 6675 is: snd_max - snd_una - sackhint.sacked_bytes + sackhint.sack_bytes_rexmit which takes sacked bytes into account which is a new addition to the sackhint struct. Only thing we are missing from RFC 6675 is isLost() i.e. segment being considered lost and thus adjusting pipe based on that which makes this calculation a bit on conservative side. The approach is very simple. We already process each ack with sack info in tcp_sack_doack() and extract sack blocks/holes out of it. We'd now also track this new variable sacked_bytes which keeps track of total sacked bytes reported. One downside to this approach is that we may get incorrect count of sacked_bytes if the other end decides to drop sack info in the ack because of memory pressure or some other reasons. But in this (not very likely) case also the pipe calculation would be conservative which is okay as opposed to being aggressive in sending packets into the network. Next step is to use this more accurate pipe estimation to drive congestion window adjustments. In collaboration with: rrs Reviewed by: jason_eggnet dot com, rrs MFC after: 2 weeks Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D3971
2015-10-28 22:57:51 +00:00
int sacked_bytes; /*
* Total sacked bytes reported by the
* receiver via sack option
*/
uint32_t _pad1[1]; /* TBD */
Calculate the correct amount of bytes that are in-flight for a connection as suggested by RFC 6675. Currently differnt places in the stack tries to guess this in suboptimal ways. The main problem is that current calculations don't take sacked bytes into account. Sacked bytes are the bytes receiver acked via SACK option. This is suboptimal because it assumes that network has more outstanding (unacked) bytes than the actual value and thus sends less data by setting congestion window lower than what's possible which in turn may cause slower recovery from losses. As an example, one of the current calculations looks something like this: snd_nxt - snd_fack + sackhint.sack_bytes_rexmit New proposal from RFC 6675 is: snd_max - snd_una - sackhint.sacked_bytes + sackhint.sack_bytes_rexmit which takes sacked bytes into account which is a new addition to the sackhint struct. Only thing we are missing from RFC 6675 is isLost() i.e. segment being considered lost and thus adjusting pipe based on that which makes this calculation a bit on conservative side. The approach is very simple. We already process each ack with sack info in tcp_sack_doack() and extract sack blocks/holes out of it. We'd now also track this new variable sacked_bytes which keeps track of total sacked bytes reported. One downside to this approach is that we may get incorrect count of sacked_bytes if the other end decides to drop sack info in the ack because of memory pressure or some other reasons. But in this (not very likely) case also the pipe calculation would be conservative which is okay as opposed to being aggressive in sending packets into the network. Next step is to use this more accurate pipe estimation to drive congestion window adjustments. In collaboration with: rrs Reviewed by: jason_eggnet dot com, rrs MFC after: 2 weeks Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D3971
2015-10-28 22:57:51 +00:00
uint64_t _pad[1]; /* TBD */
};
struct tcptemp {
u_char tt_ipgen[40]; /* the size must be of max ip header, now IPv6 */
struct tcphdr tt_t;
};
#define tcp6cb tcpcb /* for KAME src sync over BSD*'s */
/*
* TODO: We yet need to brave plowing in
* to tcp_input() and the pru_usrreq() block.
* Right now these go to the old standards which
* are somewhat ok, but in the long term may
* need to be changed. If we do tackle tcp_input()
* then we need to get rid of the tcp_do_segment()
* function below.
*/
/* Flags for tcp functions */
#define TCP_FUNC_BEING_REMOVED 0x01 /* Can no longer be referenced */
struct tcpcb;
struct inpcb;
struct sockopt;
struct socket;
/*
* If defining the optional tcp_timers, in the
* tfb_tcp_timer_stop call you must use the
* callout_async_drain() function with the
* tcp_timer_discard callback. You should check
* the return of callout_async_drain() and if 0
* increment tt_draincnt. Since the timer sub-system
* does not know your callbacks you must provide a
* stop_all function that loops through and calls
* tcp_timer_stop() with each of your defined timers.
*/
struct tcp_function_block {
char tfb_tcp_block_name[TCP_FUNCTION_NAME_LEN_MAX];
int (*tfb_tcp_output)(struct tcpcb *);
void (*tfb_tcp_do_segment)(struct mbuf *, struct tcphdr *,
struct socket *, struct tcpcb *,
int, int, uint8_t,
int);
int (*tfb_tcp_ctloutput)(struct socket *so, struct sockopt *sopt,
struct inpcb *inp, struct tcpcb *tp);
/* Optional memory allocation/free routine */
void (*tfb_tcp_fb_init)(struct tcpcb *);
void (*tfb_tcp_fb_fini)(struct tcpcb *);
/* Optional timers, must define all if you define one */
int (*tfb_tcp_timer_stop_all)(struct tcpcb *);
void (*tfb_tcp_timer_activate)(struct tcpcb *,
uint32_t, u_int);
int (*tfb_tcp_timer_active)(struct tcpcb *, uint32_t);
void (*tfb_tcp_timer_stop)(struct tcpcb *, uint32_t);
void (*tfb_tcp_rexmit_tmr)(struct tcpcb *);
volatile uint32_t tfb_refcnt;
uint32_t tfb_flags;
};
struct tcp_function {
TAILQ_ENTRY(tcp_function) tf_next;
struct tcp_function_block *tf_fb;
};
TAILQ_HEAD(tcp_funchead, tcp_function);
1994-05-24 10:09:53 +00:00
/*
* Tcp control block, one per tcp; fields:
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
* Organized for 16 byte cacheline efficiency.
1994-05-24 10:09:53 +00:00
*/
struct tcpcb {
struct tsegqe_head t_segq; /* segment reassembly queue */
void *t_pspare[2]; /* new reassembly queue */
int t_segqlen; /* segment reassembly queue length */
int t_dupacks; /* consecutive dup acks recd */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
struct tcp_timer *t_timers; /* All the TCP timers in one struct */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
struct inpcb *t_inpcb; /* back pointer to internet pcb */
int t_state; /* state of this connection */
u_int t_flags;
1994-05-24 10:09:53 +00:00
Permit buiding kernels with options VIMAGE, restricted to only a single active network stack instance. Turning on options VIMAGE at compile time yields the following changes relative to default kernel build: 1) V_ accessor macros for virtualized variables resolve to structure fields via base pointers, instead of being resolved as fields in global structs or plain global variables. As an example, V_ifnet becomes: options VIMAGE: ((struct vnet_net *) vnet_net)->_ifnet default build: vnet_net_0._ifnet options VIMAGE_GLOBALS: ifnet 2) INIT_VNET_* macros will declare and set up base pointers to be used by V_ accessor macros, instead of resolving to whitespace: INIT_VNET_NET(ifp->if_vnet); becomes struct vnet_net *vnet_net = (ifp->if_vnet)->mod_data[VNET_MOD_NET]; 3) Memory for vnet modules registered via vnet_mod_register() is now allocated at run time in sys/kern/kern_vimage.c, instead of per vnet module structs being declared as globals. If required, vnet modules can now request the framework to provide them with allocated bzeroed memory by filling in the vmi_size field in their vmi_modinfo structures. 4) structs socket, ifnet, inpcbinfo, tcpcb and syncache_head are extended to hold a pointer to the parent vnet. options VIMAGE builds will fill in those fields as required. 5) curvnet is introduced as a new global variable in options VIMAGE builds, always pointing to the default and only struct vnet. 6) struct sysctl_oid has been extended with additional two fields to store major and minor virtualization module identifiers, oid_v_subs and oid_v_mod. SYSCTL_V_* family of macros will fill in those fields accordingly, and store the offset in the appropriate vnet container struct in oid_arg1. In sysctl handlers dealing with virtualized sysctls, the SYSCTL_RESOLVE_V_ARG1() macro will compute the address of the target variable and make it available in arg1 variable for further processing. Unused fields in structs vnet_inet, vnet_inet6 and vnet_ipfw have been deleted. Reviewed by: bz, rwatson Approved by: julian (mentor)
2009-04-30 13:36:26 +00:00
struct vnet *t_vnet; /* back pointer to parent vnet */
tcp_seq snd_una; /* sent but unacknowledged */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
tcp_seq snd_max; /* highest sequence number sent;
* used to recognize retransmits
*/
1994-05-24 10:09:53 +00:00
tcp_seq snd_nxt; /* send next */
tcp_seq snd_up; /* send urgent pointer */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
1994-05-24 10:09:53 +00:00
tcp_seq snd_wl1; /* window update seg seq number */
tcp_seq snd_wl2; /* window update seg ack number */
tcp_seq iss; /* initial send sequence number */
tcp_seq irs; /* initial receive sequence number */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
tcp_seq rcv_nxt; /* receive next */
1994-05-24 10:09:53 +00:00
tcp_seq rcv_adv; /* advertised window */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_long rcv_wnd; /* receive window */
tcp_seq rcv_up; /* receive urgent pointer */
u_long snd_wnd; /* send window */
1994-05-24 10:09:53 +00:00
u_long snd_cwnd; /* congestion-controlled window */
u_long snd_spare1; /* unused */
u_long snd_ssthresh; /* snd_cwnd size threshold for
1994-05-24 10:09:53 +00:00
* for slow start exponential to
* linear switch
*/
u_long snd_spare2; /* unused */
tcp_seq snd_recover; /* for use in NewReno Fast Recovery */
u_int t_rcvtime; /* inactivity time */
u_int t_starttime; /* time connection was established */
u_int t_rtttime; /* RTT measurement start time */
1994-05-24 10:09:53 +00:00
tcp_seq t_rtseq; /* sequence number being timed */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_int t_bw_spare1; /* unused */
tcp_seq t_bw_spare2; /* unused */
int t_rxtcur; /* current retransmit value (ticks) */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_int t_maxseg; /* maximum segment size */
u_int t_pmtud_saved_maxseg; /* pre-blackhole MSS */
int t_srtt; /* smoothed round-trip time */
int t_rttvar; /* variance in round-trip time */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
int t_rxtshift; /* log(2) of rexmt exp. backoff */
u_int t_rttmin; /* minimum rtt allowed */
u_int t_rttbest; /* best rtt we've seen */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
u_long t_rttupdated; /* number of times rtt sampled */
1994-05-24 10:09:53 +00:00
u_long max_sndwnd; /* largest window peer has offered */
Improved connection establishment performance by doing local port lookups via a hashed port list. In the new scheme, in_pcblookup() goes away and is replaced by a new routine, in_pcblookup_local() for doing the local port check. Note that this implementation is space inefficient in that the PCB struct is now too large to fit into 128 bytes. I might deal with this in the future by using the new zone allocator, but I wanted these changes to be extensively tested in their current form first. Also: 1) Fixed off-by-one errors in the port lookup loops in in_pcbbind(). 2) Got rid of some unneeded rehashing. Adding a new routine, in_pcbinshash() to do the initialial hash insertion. 3) Renamed in_pcblookuphash() to in_pcblookup_hash() for easier readability. 4) Added a new routine, in_pcbremlists() to remove the PCB from the various hash lists. 5) Added/deleted comments where appropriate. 6) Removed unnecessary splnet() locking. In general, the PCB functions should be called at splnet()...there are unfortunately a few exceptions, however. 7) Reorganized a few structs for better cache line behavior. 8) Killed my TCP_ACK_HACK kludge. It may come back in a different form in the future, however. These changes have been tested on wcarchive for more than a month. In tests done here, connection establishment overhead is reduced by more than 50 times, thus getting rid of one of the major networking scalability problems. Still to do: make tcp_fastimo/tcp_slowtimo scale well for systems with a large number of connections. tcp_fastimo is easy; tcp_slowtimo is difficult. WARNING: Anything that knows about inpcb and tcpcb structs will have to be recompiled; at the very least, this includes netstat(1).
1998-01-27 09:15:13 +00:00
int t_softerror; /* possible error not yet reported */
1994-05-24 10:09:53 +00:00
/* out-of-band data */
char t_oobflags; /* have some */
char t_iobc; /* input character */
/* RFC 1323 variables */
u_char snd_scale; /* window scaling for send window */
u_char rcv_scale; /* window scaling for recv window */
u_char request_r_scale; /* pending window scaling */
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
u_int32_t ts_recent; /* timestamp echo data */
u_int ts_recent_age; /* when last updated */
Rewrite of TCP syncookies to remove locking requirements and to enhance functionality: - Remove a rwlock aquisition/release per generated syncookie. Locking is now integrated with the bucket row locking of syncache itself and syncookies no longer add any additional lock overhead. - Syncookie secrets are different for and stored per syncache buck row. Secrets expire after 16 seconds and are reseeded on-demand. - The computational overhead for syncookie generation and verification is one MD5 hash computation as before. - Syncache can be turned off and run with syncookies only by setting the sysctl net.inet.tcp.syncookies_only=1. This implementation extends the orginal idea and first implementation of FreeBSD by using not only the initial sequence number field to store information but also the timestamp field if present. This way we can keep track of the entire state we need to know to recreate the session in its original form. Almost all TCP speakers implement RFC1323 timestamps these days. For those that do not we still have to live with the known shortcomings of the ISN only SYN cookies. The use of the timestamp field causes the timestamps to be randomized if syncookies are enabled. The idea of SYN cookies is to encode and include all necessary information about the connection setup state within the SYN-ACK we send back and thus to get along without keeping any local state until the ACK to the SYN-ACK arrives (if ever). Everything we need to know should be available from the information we encoded in the SYN-ACK. A detailed description of the inner working of the syncookies mechanism is included in the comments in tcp_syncache.c. Reviewed by: silby (slightly earlier version) Sponsored by: TCP/IP Optimization Fundraise 2005
2006-09-13 13:08:27 +00:00
u_int32_t ts_offset; /* our timestamp offset */
1994-05-24 10:09:53 +00:00
tcp_seq last_ack_sent;
/* experimental */
u_long snd_cwnd_prev; /* cwnd prior to retransmit */
u_long snd_ssthresh_prev; /* ssthresh prior to retransmit */
tcp_seq snd_recover_prev; /* snd_recover prior to retransmit */
int t_sndzerowin; /* zero-window updates sent */
u_int t_badrxtwin; /* window for retransmit recovery */
u_char snd_limited; /* segments limited transmitted */
2004-06-25 02:29:58 +00:00
/* SACK related state */
int snd_numholes; /* number of holes seen by sender */
TAILQ_HEAD(sackhole_head, sackhole) snd_holes;
/* SACK scoreboard (sorted) */
tcp_seq snd_fack; /* last seq number(+1) sack'd by rcv'r*/
int rcv_numsacks; /* # distinct sack blks present */
struct sackblk sackblks[MAX_SACK_BLKS]; /* seq nos. of sack blocks */
tcp_seq sack_newdata; /* New data xmitted in this recovery
episode starts at this seq number */
struct sackhint sackhint; /* SACK scoreboard hint */
int t_rttlow; /* smallest observerved RTT */
u_int32_t rfbuf_ts; /* recv buffer autoscaling timestamp */
int rfbuf_cnt; /* recv buffer autoscaling byte count */
struct toedev *tod; /* toedev handling this connection */
int t_sndrexmitpack; /* retransmit packets sent */
int t_rcvoopack; /* out-of-order packets received */
void *t_toe; /* TOE pcb pointer */
int t_bytes_acked; /* # bytes acked during current RTT */
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
struct cc_algo *cc_algo; /* congestion control algorithm */
struct cc_var *ccv; /* congestion control specific vars */
struct osd *osd; /* storage for Khelp module data */
u_int t_keepinit; /* time to establish connection */
u_int t_keepidle; /* time before keepalive probes begin */
u_int t_keepintvl; /* interval between keepalives */
u_int t_keepcnt; /* number of keepalives before close */
u_int t_tsomax; /* TSO total burst length limit in bytes */
u_int t_tsomaxsegcount; /* TSO maximum segment count */
u_int t_tsomaxsegsize; /* TSO maximum segment size in bytes */
u_int t_flags2; /* More tcpcb flags storage */
#if defined(_KERNEL) && defined(TCP_RFC7413)
uint32_t t_ispare[6]; /* 5 UTO, 1 TBD */
uint64_t t_tfo_cookie; /* TCP Fast Open cookie */
#else
uint32_t t_ispare[8]; /* 5 UTO, 3 TBD */
#endif
struct tcp_function_block *t_fb;/* TCP function call block */
void *t_fb_ptr; /* Pointer to t_fb specific data */
#if defined(_KERNEL) && defined(TCP_RFC7413)
unsigned int *t_tfo_pending; /* TCP Fast Open pending counter */
void *t_pspare2[1]; /* 1 TCP_SIGNATURE */
#else
void *t_pspare2[2]; /* 1 TCP_SIGNATURE, 1 TBD */
#endif
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
#if defined(_KERNEL) && defined(TCPPCAP)
struct mbufq t_inpkts; /* List of saved input packets. */
struct mbufq t_outpkts; /* List of saved output packets. */
#ifdef _LP64
uint64_t _pad[0]; /* all used! */
#else
uint64_t _pad[2]; /* 2 are available */
#endif /* _LP64 */
#else
uint64_t _pad[6];
#endif /* defined(_KERNEL) && defined(TCPPCAP) */
1994-05-24 10:09:53 +00:00
};
/*
* Flags and utility macros for the t_flags field.
*/
#define TF_ACKNOW 0x000001 /* ack peer immediately */
#define TF_DELACK 0x000002 /* ack, but try to delay it */
#define TF_NODELAY 0x000004 /* don't delay packets to coalesce */
#define TF_NOOPT 0x000008 /* don't use tcp options */
#define TF_SENTFIN 0x000010 /* have sent FIN */
#define TF_REQ_SCALE 0x000020 /* have/will request window scaling */
#define TF_RCVD_SCALE 0x000040 /* other side has requested scaling */
#define TF_REQ_TSTMP 0x000080 /* have/will request timestamps */
#define TF_RCVD_TSTMP 0x000100 /* a timestamp was received in SYN */
#define TF_SACK_PERMIT 0x000200 /* other side said I could SACK */
#define TF_NEEDSYN 0x000400 /* send SYN (implicit state) */
#define TF_NEEDFIN 0x000800 /* send FIN (implicit state) */
#define TF_NOPUSH 0x001000 /* don't push */
TCP reuses t_rxtshift to determine the backoff timer used for both the persist state and the retransmit timer. However, the code that implements "bad retransmit recovery" only checks t_rxtshift to see if an ACK has been received in during the first retransmit timeout window. As a result, if ticks has wrapped over to a negative value and a socket is in the persist state, it can incorrectly treat an ACK from the remote peer as a "bad retransmit recovery" and restore saved values such as snd_ssthresh and snd_cwnd. However, if the socket has never had a retransmit timeout, then these saved values will be zero, so snd_ssthresh and snd_cwnd will be set to 0. If the socket is in fast recovery (this can be caused by excessive duplicate ACKs such as those fixed by 220794), then each ACK that arrives triggers either NewReno or SACK partial ACK handling which clamps snd_cwnd to be no larger than snd_ssthresh. In effect, the socket's send window is permamently stuck at 0 even though the remote peer is advertising a much larger window and pending data is only sent via TCP window probes (so one byte every few seconds). Fix this by adding a new TCP pcb flag (TF_PREVVALID) that indicates that the various snd_*_prev fields in the pcb are valid and only perform "bad retransmit recovery" if this flag is set in the pcb. The flag is set on the first retransmit timeout that occurs and is cleared on subsequent retransmit timeouts or when entering the persist state. Reviewed by: bz MFC after: 2 weeks
2011-04-29 15:40:12 +00:00
#define TF_PREVVALID 0x002000 /* saved values for bad rxmit valid */
#define TF_MORETOCOME 0x010000 /* More data to be appended to sock */
#define TF_LQ_OVERFLOW 0x020000 /* listen queue overflow */
#define TF_LASTIDLE 0x040000 /* connection was previously idle */
#define TF_RXWIN0SENT 0x080000 /* sent a receiver win 0 in response */
#define TF_FASTRECOVERY 0x100000 /* in NewReno Fast Recovery */
#define TF_WASFRECOVERY 0x200000 /* was in NewReno Fast Recovery */
#define TF_SIGNATURE 0x400000 /* require MD5 digests (RFC2385) */
#define TF_FORCEDATA 0x800000 /* force out a byte */
#define TF_TSO 0x1000000 /* TSO enabled on this connection */
#define TF_TOE 0x2000000 /* this connection is offloaded */
#define TF_ECN_PERMIT 0x4000000 /* connection ECN-ready */
#define TF_ECN_SND_CWR 0x8000000 /* ECN CWR in queue */
#define TF_ECN_SND_ECE 0x10000000 /* ECN ECE in queue */
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
#define TF_CONGRECOVERY 0x20000000 /* congestion recovery mode */
#define TF_WASCRECOVERY 0x40000000 /* was in congestion recovery */
#define TF_FASTOPEN 0x80000000 /* TCP Fast Open indication */
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
#define IN_FASTRECOVERY(t_flags) (t_flags & TF_FASTRECOVERY)
#define ENTER_FASTRECOVERY(t_flags) t_flags |= TF_FASTRECOVERY
#define EXIT_FASTRECOVERY(t_flags) t_flags &= ~TF_FASTRECOVERY
#define IN_CONGRECOVERY(t_flags) (t_flags & TF_CONGRECOVERY)
#define ENTER_CONGRECOVERY(t_flags) t_flags |= TF_CONGRECOVERY
#define EXIT_CONGRECOVERY(t_flags) t_flags &= ~TF_CONGRECOVERY
#define IN_RECOVERY(t_flags) (t_flags & (TF_CONGRECOVERY | TF_FASTRECOVERY))
#define ENTER_RECOVERY(t_flags) t_flags |= (TF_CONGRECOVERY | TF_FASTRECOVERY)
#define EXIT_RECOVERY(t_flags) t_flags &= ~(TF_CONGRECOVERY | TF_FASTRECOVERY)
#define BYTES_THIS_ACK(tp, th) (th->th_ack - tp->snd_una)
/*
* Flags for the t_oobflags field.
*/
#define TCPOOB_HAVEDATA 0x01
#define TCPOOB_HADDATA 0x02
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#ifdef TCP_SIGNATURE
/*
* Defines which are needed by the xform_tcp module and tcp_[in|out]put
* for SADB verification and lookup.
*/
#define TCP_SIGLEN 16 /* length of computed digest in bytes */
#define TCP_KEYLEN_MIN 1 /* minimum length of TCP-MD5 key */
#define TCP_KEYLEN_MAX 80 /* maximum length of TCP-MD5 key */
/*
* Only a single SA per host may be specified at this time. An SPI is
* needed in order for the KEY_ALLOCSA() lookup to work.
*/
#define TCP_SIG_SPI 0x1000
#endif /* TCP_SIGNATURE */
/*
* Flags for PLPMTU handling, t_flags2
*/
#define TF2_PLPMTU_BLACKHOLE 0x00000001 /* Possible PLPMTUD Black Hole. */
#define TF2_PLPMTU_PMTUD 0x00000002 /* Allowed to attempt PLPMTUD. */
#define TF2_PLPMTU_MAXSEGSNT 0x00000004 /* Last seg sent was full seg. */
/*
* Structure to hold TCP options that are only used during segment
* processing (in tcp_input), but not held in the tcpcb.
* It's basically used to reduce the number of parameters
* to tcp_dooptions and tcp_addoptions.
* The binary order of the to_flags is relevant for packing of the
* options in tcp_addoptions.
*/
struct tcpopt {
u_int32_t to_flags; /* which options are present */
#define TOF_MSS 0x0001 /* maximum segment size */
#define TOF_SCALE 0x0002 /* window scaling */
#define TOF_SACKPERM 0x0004 /* SACK permitted */
#define TOF_TS 0x0010 /* timestamp */
#define TOF_SIGNATURE 0x0040 /* TCP-MD5 signature option (RFC2385) */
#define TOF_SACK 0x0080 /* Peer sent SACK option */
#define TOF_FASTOPEN 0x0100 /* TCP Fast Open (TFO) cookie */
#define TOF_MAXOPT 0x0200
u_int32_t to_tsval; /* new timestamp */
u_int32_t to_tsecr; /* reflected timestamp */
u_char *to_sacks; /* pointer to the first SACK blocks */
u_char *to_signature; /* pointer to the TCP-MD5 signature */
u_char *to_tfo_cookie; /* pointer to the TFO cookie */
u_int16_t to_mss; /* maximum segment size */
u_int8_t to_wscale; /* window scaling */
u_int8_t to_nsacks; /* number of SACK blocks */
u_int8_t to_tfo_len; /* TFO cookie length */
u_int32_t to_spare; /* UTO */
};
/*
* Flags for tcp_dooptions.
*/
#define TO_SYN 0x01 /* parse SYN-only options */
struct hc_metrics_lite { /* must stay in sync with hc_metrics */
u_long rmx_mtu; /* MTU for this path */
u_long rmx_ssthresh; /* outbound gateway buffer limit */
u_long rmx_rtt; /* estimated round trip time */
u_long rmx_rttvar; /* estimated rtt variance */
u_long rmx_cwnd; /* congestion window */
u_long rmx_sendpipe; /* outbound delay-bandwidth product */
u_long rmx_recvpipe; /* inbound delay-bandwidth product */
};
/*
* Used by tcp_maxmtu() to communicate interface specific features
* and limits at the time of connection setup.
*/
struct tcp_ifcap {
int ifcap;
u_int tsomax;
u_int tsomaxsegcount;
u_int tsomaxsegsize;
};
#ifndef _NETINET_IN_PCB_H_
struct in_conninfo;
#endif /* _NETINET_IN_PCB_H_ */
struct tcptw {
struct inpcb *tw_inpcb; /* XXX back pointer to internet pcb */
tcp_seq snd_nxt;
tcp_seq rcv_nxt;
tcp_seq iss;
tcp_seq irs;
u_short last_win; /* cached window value */
u_short tw_so_options; /* copy of so_options */
struct ucred *tw_cred; /* user credentials */
u_int32_t t_recent;
u_int32_t ts_offset; /* our timestamp offset */
u_int t_starttime;
int tw_time;
TAILQ_ENTRY(tcptw) tw_2msl;
void *tw_pspare; /* TCP_SIGNATURE */
u_int *tw_spare; /* TCP_SIGNATURE */
};
1994-05-24 10:09:53 +00:00
#define intotcpcb(ip) ((struct tcpcb *)(ip)->inp_ppcb)
#define intotw(ip) ((struct tcptw *)(ip)->inp_ppcb)
1994-05-24 10:09:53 +00:00
#define sototcpcb(so) (intotcpcb(sotoinpcb(so)))
/*
* The smoothed round-trip time and estimated variance
* are stored as fixed point numbers scaled by the values below.
* For convenience, these scales are also used in smoothing the average
* (smoothed = (1/scale)sample + ((scale-1)/scale)smoothed).
* With these scales, srtt has 3 bits to the right of the binary point,
* and thus an "ALPHA" of 0.875. rttvar has 2 bits to the right of the
* binary point, and is smoothed with an ALPHA of 0.75.
*/
#define TCP_RTT_SCALE 32 /* multiplier for srtt; 3 bits frac. */
#define TCP_RTT_SHIFT 5 /* shift for srtt; 3 bits frac. */
#define TCP_RTTVAR_SCALE 16 /* multiplier for rttvar; 2 bits */
#define TCP_RTTVAR_SHIFT 4 /* shift for rttvar; 2 bits */
#define TCP_DELTA_SHIFT 2 /* see tcp_input.c */
1994-05-24 10:09:53 +00:00
/*
* The initial retransmission should happen at rtt + 4 * rttvar.
* Because of the way we do the smoothing, srtt and rttvar
* will each average +1/2 tick of bias. When we compute
* the retransmit timer, we want 1/2 tick of rounding and
* 1 extra tick because of +-1/2 tick uncertainty in the
* firing of the timer. The bias will give us exactly the
* 1.5 tick we need. But, because the bias is
* statistical, we have to test that we don't drop below
* the minimum feasible timer (which is 2 ticks).
* This version of the macro adapted from a paper by Lawrence
* Brakmo and Larry Peterson which outlines a problem caused
* by insufficient precision in the original implementation,
* which results in inappropriately large RTO values for very
* fast networks.
1994-05-24 10:09:53 +00:00
*/
#define TCP_REXMTVAL(tp) \
max((tp)->t_rttmin, (((tp)->t_srtt >> (TCP_RTT_SHIFT - TCP_DELTA_SHIFT)) \
+ (tp)->t_rttvar) >> TCP_DELTA_SHIFT)
1994-05-24 10:09:53 +00:00
/*
* TCP statistics.
* Many of these should be kept per connection,
* but that's inconvenient at the moment.
*/
struct tcpstat {
uint64_t tcps_connattempt; /* connections initiated */
uint64_t tcps_accepts; /* connections accepted */
uint64_t tcps_connects; /* connections established */
uint64_t tcps_drops; /* connections dropped */
uint64_t tcps_conndrops; /* embryonic connections dropped */
uint64_t tcps_minmssdrops; /* average minmss too low drops */
uint64_t tcps_closed; /* conn. closed (includes drops) */
uint64_t tcps_segstimed; /* segs where we tried to get rtt */
uint64_t tcps_rttupdated; /* times we succeeded */
uint64_t tcps_delack; /* delayed acks sent */
uint64_t tcps_timeoutdrop; /* conn. dropped in rxmt timeout */
uint64_t tcps_rexmttimeo; /* retransmit timeouts */
uint64_t tcps_persisttimeo; /* persist timeouts */
uint64_t tcps_keeptimeo; /* keepalive timeouts */
uint64_t tcps_keepprobe; /* keepalive probes sent */
uint64_t tcps_keepdrops; /* connections dropped in keepalive */
uint64_t tcps_sndtotal; /* total packets sent */
uint64_t tcps_sndpack; /* data packets sent */
uint64_t tcps_sndbyte; /* data bytes sent */
uint64_t tcps_sndrexmitpack; /* data packets retransmitted */
uint64_t tcps_sndrexmitbyte; /* data bytes retransmitted */
uint64_t tcps_sndrexmitbad; /* unnecessary packet retransmissions */
uint64_t tcps_sndacks; /* ack-only packets sent */
uint64_t tcps_sndprobe; /* window probes sent */
uint64_t tcps_sndurg; /* packets sent with URG only */
uint64_t tcps_sndwinup; /* window update-only packets sent */
uint64_t tcps_sndctrl; /* control (SYN|FIN|RST) packets sent */
uint64_t tcps_rcvtotal; /* total packets received */
uint64_t tcps_rcvpack; /* packets received in sequence */
uint64_t tcps_rcvbyte; /* bytes received in sequence */
uint64_t tcps_rcvbadsum; /* packets received with ccksum errs */
uint64_t tcps_rcvbadoff; /* packets received with bad offset */
uint64_t tcps_rcvreassfull; /* packets dropped for no reass space */
uint64_t tcps_rcvshort; /* packets received too short */
uint64_t tcps_rcvduppack; /* duplicate-only packets received */
uint64_t tcps_rcvdupbyte; /* duplicate-only bytes received */
uint64_t tcps_rcvpartduppack; /* packets with some duplicate data */
uint64_t tcps_rcvpartdupbyte; /* dup. bytes in part-dup. packets */
uint64_t tcps_rcvoopack; /* out-of-order packets received */
uint64_t tcps_rcvoobyte; /* out-of-order bytes received */
uint64_t tcps_rcvpackafterwin; /* packets with data after window */
uint64_t tcps_rcvbyteafterwin; /* bytes rcvd after window */
uint64_t tcps_rcvafterclose; /* packets rcvd after "close" */
uint64_t tcps_rcvwinprobe; /* rcvd window probe packets */
uint64_t tcps_rcvdupack; /* rcvd duplicate acks */
uint64_t tcps_rcvacktoomuch; /* rcvd acks for unsent data */
uint64_t tcps_rcvackpack; /* rcvd ack packets */
uint64_t tcps_rcvackbyte; /* bytes acked by rcvd acks */
uint64_t tcps_rcvwinupd; /* rcvd window update packets */
uint64_t tcps_pawsdrop; /* segments dropped due to PAWS */
uint64_t tcps_predack; /* times hdr predict ok for acks */
uint64_t tcps_preddat; /* times hdr predict ok for data pkts */
uint64_t tcps_pcbcachemiss;
uint64_t tcps_cachedrtt; /* times cached RTT in route updated */
uint64_t tcps_cachedrttvar; /* times cached rttvar updated */
uint64_t tcps_cachedssthresh; /* times cached ssthresh updated */
uint64_t tcps_usedrtt; /* times RTT initialized from route */
uint64_t tcps_usedrttvar; /* times RTTVAR initialized from rt */
uint64_t tcps_usedssthresh; /* times ssthresh initialized from rt*/
uint64_t tcps_persistdrop; /* timeout in persist state */
uint64_t tcps_badsyn; /* bogus SYN, e.g. premature ACK */
uint64_t tcps_mturesent; /* resends due to MTU discovery */
uint64_t tcps_listendrop; /* listen queue overflows */
uint64_t tcps_badrst; /* ignored RSTs in the window */
uint64_t tcps_sc_added; /* entry added to syncache */
uint64_t tcps_sc_retransmitted; /* syncache entry was retransmitted */
uint64_t tcps_sc_dupsyn; /* duplicate SYN packet */
uint64_t tcps_sc_dropped; /* could not reply to packet */
uint64_t tcps_sc_completed; /* successful extraction of entry */
uint64_t tcps_sc_bucketoverflow;/* syncache per-bucket limit hit */
uint64_t tcps_sc_cacheoverflow; /* syncache cache limit hit */
uint64_t tcps_sc_reset; /* RST removed entry from syncache */
uint64_t tcps_sc_stale; /* timed out or listen socket gone */
uint64_t tcps_sc_aborted; /* syncache entry aborted */
uint64_t tcps_sc_badack; /* removed due to bad ACK */
uint64_t tcps_sc_unreach; /* ICMP unreachable received */
uint64_t tcps_sc_zonefail; /* zalloc() failed */
uint64_t tcps_sc_sendcookie; /* SYN cookie sent */
uint64_t tcps_sc_recvcookie; /* SYN cookie received */
uint64_t tcps_hc_added; /* entry added to hostcache */
uint64_t tcps_hc_bucketoverflow;/* hostcache per bucket limit hit */
uint64_t tcps_finwait2_drops; /* Drop FIN_WAIT_2 connection after time limit */
/* SACK related stats */
uint64_t tcps_sack_recovery_episode; /* SACK recovery episodes */
uint64_t tcps_sack_rexmits; /* SACK rexmit segments */
uint64_t tcps_sack_rexmit_bytes; /* SACK rexmit bytes */
uint64_t tcps_sack_rcv_blocks; /* SACK blocks (options) received */
uint64_t tcps_sack_send_blocks; /* SACK blocks (options) sent */
uint64_t tcps_sack_sboverflow; /* times scoreboard overflowed */
/* ECN related stats */
uint64_t tcps_ecn_ce; /* ECN Congestion Experienced */
uint64_t tcps_ecn_ect0; /* ECN Capable Transport */
uint64_t tcps_ecn_ect1; /* ECN Capable Transport */
uint64_t tcps_ecn_shs; /* ECN successful handshakes */
uint64_t tcps_ecn_rcwnd; /* # times ECN reduced the cwnd */
/* TCP_SIGNATURE related stats */
uint64_t tcps_sig_rcvgoodsig; /* Total matching signature received */
uint64_t tcps_sig_rcvbadsig; /* Total bad signature received */
uint64_t tcps_sig_err_buildsig; /* Mismatching signature received */
uint64_t tcps_sig_err_sigopt; /* No signature expected by socket */
uint64_t tcps_sig_err_nosigopt; /* No signature provided by segment */
uint64_t _pad[12]; /* 6 UTO, 6 TBD */
1994-05-24 10:09:53 +00:00
};
#define tcps_rcvmemdrop tcps_rcvreassfull /* compat */
#ifdef _KERNEL
#define TI_UNLOCKED 1
#define TI_RLOCKED 2
#include <sys/counter.h>
VNET_PCPUSTAT_DECLARE(struct tcpstat, tcpstat); /* tcp statistics */
/*
* In-kernel consumers can use these accessor macros directly to update
* stats.
*/
#define TCPSTAT_ADD(name, val) \
VNET_PCPUSTAT_ADD(struct tcpstat, tcpstat, name, (val))
#define TCPSTAT_INC(name) TCPSTAT_ADD(name, 1)
/*
* Kernel module consumers must use this accessor macro.
*/
void kmod_tcpstat_inc(int statnum);
#define KMOD_TCPSTAT_INC(name) \
kmod_tcpstat_inc(offsetof(struct tcpstat, name) / sizeof(uint64_t))
/*
* Running TCP connection count by state.
*/
VNET_DECLARE(counter_u64_t, tcps_states[TCP_NSTATES]);
#define TCPSTATES_INC(state) counter_u64_add(VNET(tcps_states)[state], 1)
#define TCPSTATES_DEC(state) counter_u64_add(VNET(tcps_states)[state], -1)
/*
* TCP specific helper hook point identifiers.
*/
#define HHOOK_TCP_EST_IN 0
#define HHOOK_TCP_EST_OUT 1
#define HHOOK_TCP_LAST HHOOK_TCP_EST_OUT
struct tcp_hhook_data {
struct tcpcb *tp;
struct tcphdr *th;
struct tcpopt *to;
long len;
int tso;
tcp_seq curack;
};
#endif
/*
* TCB structure exported to user-land via sysctl(3).
* Evil hack: declare only if in_pcb.h and sys/socketvar.h have been
* included. Not all of our clients do.
*/
#if defined(_NETINET_IN_PCB_H_) && defined(_SYS_SOCKETVAR_H_)
struct xtcp_timer {
int tt_rexmt; /* retransmit timer */
int tt_persist; /* retransmit persistence */
int tt_keep; /* keepalive */
int tt_2msl; /* 2*msl TIME_WAIT timer */
int tt_delack; /* delayed ACK timer */
2011-01-07 21:40:34 +00:00
int t_rcvtime; /* Time since last packet received */
};
struct xtcpcb {
size_t xt_len;
struct inpcb xt_inp;
struct tcpcb xt_tp;
struct xsocket xt_socket;
struct xtcp_timer xt_timer;
u_quad_t xt_alignment_hack;
};
#endif
/*
* Identifiers for TCP sysctl nodes
*/
#define TCPCTL_DO_RFC1323 1 /* use RFC-1323 extensions */
#define TCPCTL_MSSDFLT 3 /* MSS default */
#define TCPCTL_STATS 4 /* statistics */
#define TCPCTL_RTTDFLT 5 /* default RTT estimate */
#define TCPCTL_KEEPIDLE 6 /* keepalive idle timer */
#define TCPCTL_KEEPINTVL 7 /* interval to send keepalives */
#define TCPCTL_SENDSPACE 8 /* send buffer space */
#define TCPCTL_RECVSPACE 9 /* receive buffer space */
#define TCPCTL_KEEPINIT 10 /* timeout for establishing syn */
#define TCPCTL_PCBLIST 11 /* list of all outstanding PCBs */
#define TCPCTL_DELACKTIME 12 /* time before sending delayed ACK */
#define TCPCTL_V6MSSDFLT 13 /* MSS default for IPv6 */
#define TCPCTL_SACK 14 /* Selective Acknowledgement,rfc 2018 */
#define TCPCTL_DROP 15 /* drop tcp connection */
#define TCPCTL_STATES 16 /* connection counts by TCP state */
#ifdef _KERNEL
#ifdef SYSCTL_DECL
SYSCTL_DECL(_net_inet_tcp);
SYSCTL_DECL(_net_inet_tcp_sack);
MALLOC_DECLARE(M_TCPLOG);
#endif
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(struct inpcbhead, tcb); /* queue of active tcpcb's */
VNET_DECLARE(struct inpcbinfo, tcbinfo);
extern int tcp_log_in_vain;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, tcp_mssdflt); /* XXX */
VNET_DECLARE(int, tcp_minmss);
VNET_DECLARE(int, tcp_delack_enabled);
VNET_DECLARE(int, tcp_do_rfc3390);
VNET_DECLARE(int, tcp_initcwnd_segments);
VNET_DECLARE(int, tcp_sendspace);
VNET_DECLARE(int, tcp_recvspace);
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, path_mtu_discovery);
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
VNET_DECLARE(int, tcp_do_rfc3465);
VNET_DECLARE(int, tcp_abc_l_var);
#define V_tcb VNET(tcb)
#define V_tcbinfo VNET(tcbinfo)
#define V_tcp_mssdflt VNET(tcp_mssdflt)
#define V_tcp_minmss VNET(tcp_minmss)
#define V_tcp_delack_enabled VNET(tcp_delack_enabled)
#define V_tcp_do_rfc3390 VNET(tcp_do_rfc3390)
#define V_tcp_initcwnd_segments VNET(tcp_initcwnd_segments)
#define V_tcp_sendspace VNET(tcp_sendspace)
#define V_tcp_recvspace VNET(tcp_recvspace)
#define V_path_mtu_discovery VNET(path_mtu_discovery)
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
#define V_tcp_do_rfc3465 VNET(tcp_do_rfc3465)
#define V_tcp_abc_l_var VNET(tcp_abc_l_var)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, tcp_do_sack); /* SACK enabled/disabled */
VNET_DECLARE(int, tcp_sc_rst_sock_fail); /* RST on sock alloc failure */
#define V_tcp_do_sack VNET(tcp_do_sack)
#define V_tcp_sc_rst_sock_fail VNET(tcp_sc_rst_sock_fail)
VNET_DECLARE(int, tcp_do_ecn); /* TCP ECN enabled/disabled */
VNET_DECLARE(int, tcp_ecn_maxretries);
#define V_tcp_do_ecn VNET(tcp_do_ecn)
#define V_tcp_ecn_maxretries VNET(tcp_ecn_maxretries)
VNET_DECLARE(struct hhook_head *, tcp_hhh[HHOOK_TCP_LAST + 1]);
#define V_tcp_hhh VNET(tcp_hhh)
Calculate the correct amount of bytes that are in-flight for a connection as suggested by RFC 6675. Currently differnt places in the stack tries to guess this in suboptimal ways. The main problem is that current calculations don't take sacked bytes into account. Sacked bytes are the bytes receiver acked via SACK option. This is suboptimal because it assumes that network has more outstanding (unacked) bytes than the actual value and thus sends less data by setting congestion window lower than what's possible which in turn may cause slower recovery from losses. As an example, one of the current calculations looks something like this: snd_nxt - snd_fack + sackhint.sack_bytes_rexmit New proposal from RFC 6675 is: snd_max - snd_una - sackhint.sacked_bytes + sackhint.sack_bytes_rexmit which takes sacked bytes into account which is a new addition to the sackhint struct. Only thing we are missing from RFC 6675 is isLost() i.e. segment being considered lost and thus adjusting pipe based on that which makes this calculation a bit on conservative side. The approach is very simple. We already process each ack with sack info in tcp_sack_doack() and extract sack blocks/holes out of it. We'd now also track this new variable sacked_bytes which keeps track of total sacked bytes reported. One downside to this approach is that we may get incorrect count of sacked_bytes if the other end decides to drop sack info in the ack because of memory pressure or some other reasons. But in this (not very likely) case also the pipe calculation would be conservative which is okay as opposed to being aggressive in sending packets into the network. Next step is to use this more accurate pipe estimation to drive congestion window adjustments. In collaboration with: rrs Reviewed by: jason_eggnet dot com, rrs MFC after: 2 weeks Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D3971
2015-10-28 22:57:51 +00:00
VNET_DECLARE(int, tcp_do_rfc6675_pipe);
#define V_tcp_do_rfc6675_pipe VNET(tcp_do_rfc6675_pipe)
int tcp_addoptions(struct tcpopt *, u_char *);
int tcp_ccalgounload(struct cc_algo *unload_algo);
1994-05-24 10:09:53 +00:00
struct tcpcb *
2002-03-19 21:25:46 +00:00
tcp_close(struct tcpcb *);
Update TCP for infrastructural changes to the socket/pcb refcount model, pru_abort(), pru_detach(), and in_pcbdetach(): - Universally support and enforce the invariant that so_pcb is never NULL, converting dozens of unnecessary NULL checks into assertions, and eliminating dozens of unnecessary error handling cases in protocol code. - In some cases, eliminate unnecessary pcbinfo locking, as it is no longer required to ensure so_pcb != NULL. For example, the receive code no longer requires the pcbinfo lock, and the send code only requires it if building a new connection on an otherwise unconnected socket triggered via sendto() with an address. This should significnatly reduce tcbinfo lock contention in the receive and send cases. - In order to support the invariant that so_pcb != NULL, it is now necessary for the TCP code to not discard the tcpcb any time a connection is dropped, but instead leave the tcpcb until the socket is shutdown. This case is handled by setting INP_DROPPED, to substitute for using a NULL so_pcb to indicate that the connection has been dropped. This requires the inpcb lock, but not the pcbinfo lock. - Unlike all other protocols in the tree, TCP may need to retain access to the socket after the file descriptor has been closed. Set SS_PROTOREF in tcp_detach() in order to prevent the socket from being freed, and add a flag, INP_SOCKREF, so that the TCP code knows whether or not it needs to free the socket when the connection finally does close. The typical case where this occurs is if close() is called on a TCP socket before all sent data in the send socket buffer has been transmitted or acknowledged. If INP_SOCKREF is found when the connection is dropped, we release the inpcb, tcpcb, and socket instead of flagging INP_DROPPED. - Abort and detach protocol switch methods no longer return failures, nor attempt to free sockets, as the socket layer does this. - Annotate the existence of a long-standing race in the TCP timer code, in which timers are stopped but not drained when the socket is freed, as waiting for drain may lead to deadlocks, or have to occur in a context where waiting is not permitted. This race has been handled by testing to see if the tcpcb pointer in the inpcb is NULL (and vice versa), which is not normally permitted, but may be true of a inpcb and tcpcb have been freed. Add a counter to test how often this race has actually occurred, and a large comment for each instance where we compare potentially freed memory with NULL. This will have to be fixed in the near future, but requires is to further address how to handle the timer shutdown shutdown issue. - Several TCP calls no longer potentially free the passed inpcb/tcpcb, so no longer need to return a pointer to indicate whether the argument passed in is still valid. - Un-macroize debugging and locking setup for various protocol switch methods for TCP, as it lead to more obscurity, and as locking becomes more customized to the methods, offers less benefit. - Assert copyright on tcp_usrreq.c due to significant modifications that have been made as part of this work. These changes significantly modify the memory management and connection logic of our TCP implementation, and are (as such) High Risk Changes, and likely to contain serious bugs. Please report problems to the current@ mailing list ASAP, ideally with simple test cases, and optionally, packet traces. MFC after: 3 months
2006-04-01 16:36:36 +00:00
void tcp_discardcb(struct tcpcb *);
void tcp_twstart(struct tcpcb *);
void tcp_twclose(struct tcptw *, int);
2002-03-19 21:25:46 +00:00
void tcp_ctlinput(int, struct sockaddr *, void *);
int tcp_ctloutput(struct socket *, struct sockopt *);
1994-05-24 10:09:53 +00:00
struct tcpcb *
2002-03-19 21:25:46 +00:00
tcp_drop(struct tcpcb *, int);
void tcp_drain(void);
void tcp_init(void);
#ifdef VIMAGE
void tcp_destroy(void);
#endif
void tcp_fini(void *);
2011-01-07 21:40:34 +00:00
char *tcp_log_addrs(struct in_conninfo *, struct tcphdr *, void *,
const void *);
char *tcp_log_vain(struct in_conninfo *, struct tcphdr *, void *,
const void *);
int tcp_reass(struct tcpcb *, struct tcphdr *, int *, struct mbuf *);
void tcp_reass_global_init(void);
void tcp_reass_flush(struct tcpcb *);
void tcp_dooptions(struct tcpopt *, u_char *, int, int);
void tcp_dropwithreset(struct mbuf *, struct tcphdr *,
struct tcpcb *, int, int);
void tcp_pulloutofband(struct socket *,
struct tcphdr *, struct mbuf *, int);
void tcp_xmit_timer(struct tcpcb *, int);
void tcp_newreno_partial_ack(struct tcpcb *, struct tcphdr *);
void cc_ack_received(struct tcpcb *tp, struct tcphdr *th,
uint16_t type);
void cc_conn_init(struct tcpcb *tp);
void cc_post_recovery(struct tcpcb *tp, struct tcphdr *th);
void cc_cong_signal(struct tcpcb *tp, struct tcphdr *th, uint32_t type);
void hhook_run_tcp_est_in(struct tcpcb *tp,
struct tcphdr *th, struct tcpopt *to);
int tcp_input(struct mbuf **, int *, int);
void tcp_do_segment(struct mbuf *, struct tcphdr *,
struct socket *, struct tcpcb *, int, int, uint8_t,
int);
int register_tcp_functions(struct tcp_function_block *blk, int wait);
int deregister_tcp_functions(struct tcp_function_block *blk);
struct tcp_function_block *find_and_ref_tcp_functions(struct tcp_function_set *fs);
struct tcp_function_block *find_and_ref_tcp_fb(struct tcp_function_block *blk);
int tcp_default_ctloutput(struct socket *so, struct sockopt *sopt, struct inpcb *inp, struct tcpcb *tp);
u_long tcp_maxmtu(struct in_conninfo *, struct tcp_ifcap *);
u_long tcp_maxmtu6(struct in_conninfo *, struct tcp_ifcap *);
u_int tcp_maxseg(const struct tcpcb *);
void tcp_mss_update(struct tcpcb *, int, int, struct hc_metrics_lite *,
struct tcp_ifcap *);
2002-03-19 21:25:46 +00:00
void tcp_mss(struct tcpcb *, int);
int tcp_mssopt(struct in_conninfo *);
struct inpcb *
tcp_drop_syn_sent(struct inpcb *, int);
1994-05-24 10:09:53 +00:00
struct tcpcb *
2002-03-19 21:25:46 +00:00
tcp_newtcpcb(struct inpcb *);
int tcp_output(struct tcpcb *);
void tcp_state_change(struct tcpcb *, int);
2002-03-19 21:25:46 +00:00
void tcp_respond(struct tcpcb *, void *,
struct tcphdr *, struct mbuf *, tcp_seq, tcp_seq, int);
void tcp_tw_init(void);
#ifdef VIMAGE
void tcp_tw_destroy(void);
#endif
void tcp_tw_zone_change(void);
int tcp_twcheck(struct inpcb *, struct tcpopt *, struct tcphdr *,
struct mbuf *, int);
2002-03-19 21:25:46 +00:00
void tcp_setpersist(struct tcpcb *);
2004-02-13 18:21:45 +00:00
#ifdef TCP_SIGNATURE
struct secasvar;
struct secasvar *tcp_get_sav(struct mbuf *, u_int);
int tcp_signature_do_compute(struct mbuf *, int, int, u_char *,
struct secasvar *);
2004-02-13 18:21:45 +00:00
int tcp_signature_compute(struct mbuf *, int, int, int, u_char *, u_int);
int tcp_signature_verify(struct mbuf *, int, int, int, struct tcpopt *,
struct tcphdr *, u_int);
int tcp_signature_check(struct mbuf *m, int off0, int tlen, int optlen,
struct tcpopt *to, struct tcphdr *th, u_int tcpbflag);
2004-02-13 18:21:45 +00:00
#endif
2002-03-19 21:25:46 +00:00
void tcp_slowtimo(void);
struct tcptemp *
tcpip_maketemplate(struct inpcb *);
void tcpip_fillheaders(struct inpcb *, void *, void *);
void tcp_timer_activate(struct tcpcb *, uint32_t, u_int);
int tcp_timer_active(struct tcpcb *, uint32_t);
void tcp_timer_stop(struct tcpcb *, uint32_t);
void tcp_trace(short, short, struct tcpcb *, void *, struct tcphdr *, int);
/*
* All tcp_hc_* functions are IPv4 and IPv6 (via in_conninfo)
*/
void tcp_hc_init(void);
#ifdef VIMAGE
void tcp_hc_destroy(void);
#endif
void tcp_hc_get(struct in_conninfo *, struct hc_metrics_lite *);
u_long tcp_hc_getmtu(struct in_conninfo *);
void tcp_hc_updatemtu(struct in_conninfo *, u_long);
void tcp_hc_update(struct in_conninfo *, struct hc_metrics_lite *);
extern struct pr_usrreqs tcp_usrreqs;
2002-03-19 21:25:46 +00:00
tcp_seq tcp_new_isn(struct tcpcb *);
One of the ways to detect loss is to count duplicate acks coming back from the other end till it reaches predetermined threshold which is 3 for us right now. Once that happens, we trigger fast-retransmit to do loss recovery. Main problem with the current implementation is that we don't honor SACK information well to detect whether an incoming ack is a dupack or not. RFC6675 has latest recommendations for that. According to it, dupack is a segment that arrives carrying a SACK block that identifies previously unknown information between snd_una and snd_max even if it carries new data, changes the advertised window, or moves the cumulative acknowledgment point. With the prevalence of Selective ACK (SACK) these days, improper handling can lead to delayed loss recovery. With the fix, new behavior looks like following: 0) th_ack < snd_una --> ignore Old acks are ignored. 1) th_ack == snd_una, !sack_changed --> ignore Acks with SACK enabled but without any new SACK info in them are ignored. 2) th_ack == snd_una, window == old_window --> increment Increment on a good dupack. 3) th_ack == snd_una, window != old_window, sack_changed --> increment When SACK enabled, it's okay to have advertized window changed if the ack has new SACK info. 4) th_ack > snd_una --> reset to 0 Reset to 0 when left edge moves. 5) th_ack > snd_una, sack_changed --> increment Increment if left edge moves but there is new SACK info. Here, sack_changed is the indicator that incoming ack has previously unknown SACK info in it. Note: This fix is not fully compliant to RFC6675. That may require a few changes to current implementation in order to keep per-sackhole dupack counter and change to the way we mark/handle sack holes. PR: 203663 Reviewed by: jtl MFC after: 3 weeks Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D4225
2015-12-08 21:21:48 +00:00
int tcp_sack_doack(struct tcpcb *, struct tcpopt *, tcp_seq);
void tcp_update_sack_list(struct tcpcb *tp, tcp_seq rcv_laststart, tcp_seq rcv_lastend);
void tcp_clean_sackreport(struct tcpcb *tp);
void tcp_sack_adjust(struct tcpcb *tp);
struct sackhole *tcp_sack_output(struct tcpcb *tp, int *sack_bytes_rexmt);
void tcp_sack_partialack(struct tcpcb *, struct tcphdr *);
void tcp_free_sackholes(struct tcpcb *tp);
int tcp_newreno(struct tcpcb *, struct tcphdr *);
u_long tcp_seq_subtract(u_long, u_long );
Calculate the correct amount of bytes that are in-flight for a connection as suggested by RFC 6675. Currently differnt places in the stack tries to guess this in suboptimal ways. The main problem is that current calculations don't take sacked bytes into account. Sacked bytes are the bytes receiver acked via SACK option. This is suboptimal because it assumes that network has more outstanding (unacked) bytes than the actual value and thus sends less data by setting congestion window lower than what's possible which in turn may cause slower recovery from losses. As an example, one of the current calculations looks something like this: snd_nxt - snd_fack + sackhint.sack_bytes_rexmit New proposal from RFC 6675 is: snd_max - snd_una - sackhint.sacked_bytes + sackhint.sack_bytes_rexmit which takes sacked bytes into account which is a new addition to the sackhint struct. Only thing we are missing from RFC 6675 is isLost() i.e. segment being considered lost and thus adjusting pipe based on that which makes this calculation a bit on conservative side. The approach is very simple. We already process each ack with sack info in tcp_sack_doack() and extract sack blocks/holes out of it. We'd now also track this new variable sacked_bytes which keeps track of total sacked bytes reported. One downside to this approach is that we may get incorrect count of sacked_bytes if the other end decides to drop sack info in the ack because of memory pressure or some other reasons. But in this (not very likely) case also the pipe calculation would be conservative which is okay as opposed to being aggressive in sending packets into the network. Next step is to use this more accurate pipe estimation to drive congestion window adjustments. In collaboration with: rrs Reviewed by: jason_eggnet dot com, rrs MFC after: 2 weeks Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D3971
2015-10-28 22:57:51 +00:00
int tcp_compute_pipe(struct tcpcb *);
static inline void
tcp_fields_to_host(struct tcphdr *th)
{
th->th_seq = ntohl(th->th_seq);
th->th_ack = ntohl(th->th_ack);
th->th_win = ntohs(th->th_win);
th->th_urp = ntohs(th->th_urp);
}
#ifdef TCP_SIGNATURE
static inline void
tcp_fields_to_net(struct tcphdr *th)
{
th->th_seq = htonl(th->th_seq);
th->th_ack = htonl(th->th_ack);
th->th_win = htons(th->th_win);
th->th_urp = htons(th->th_urp);
}
#endif
#endif /* _KERNEL */
1994-08-21 05:27:42 +00:00
#endif /* _NETINET_TCP_VAR_H_ */